From bc22c17e12c130dc929218a95aa347e0f3fd05dc Mon Sep 17 00:00:00 2001 From: Alain Knaff Date: Sun, 4 Jan 2009 22:46:16 +0100 Subject: bzip2/lzma: library support for gzip, bzip2 and lzma decompression Impact: Replaces inflate.c with a wrapper around zlib_inflate; new library code This is the first part of the bzip2/lzma patch The bzip patch is based on an idea by Christian Ludwig, includes support for compressing the kernel with bzip2 or lzma rather than gzip. Both compressors give smaller sizes than gzip. Lzma's decompresses faster than bzip2. It also supports ramdisks and initramfs' compressed using these two compressors. The functionality has been successfully used for a couple of years by the udpcast project This version applies to "tip" kernel 2.6.28 This part contains: - changed inflate.c to accomodate rest of patch - implementation of bzip2 compression (not used at this stage yet) - implementation of lzma compression (not used at this stage yet) - Makefile routines to support bzip2 and lzma kernel compression Signed-off-by: Alain Knaff Signed-off-by: H. Peter Anvin --- lib/decompress_bunzip2.c | 735 ++++++++++++++++++++++++++++++++++++++++++++ lib/decompress_inflate.c | 167 ++++++++++ lib/decompress_unlzma.c | 647 ++++++++++++++++++++++++++++++++++++++ lib/zlib_inflate/inflate.h | 4 + lib/zlib_inflate/inftrees.h | 4 + 5 files changed, 1557 insertions(+) create mode 100644 lib/decompress_bunzip2.c create mode 100644 lib/decompress_inflate.c create mode 100644 lib/decompress_unlzma.c (limited to 'lib') diff --git a/lib/decompress_bunzip2.c b/lib/decompress_bunzip2.c new file mode 100644 index 000000000000..5d3ddb5fcfd9 --- /dev/null +++ b/lib/decompress_bunzip2.c @@ -0,0 +1,735 @@ +/* vi: set sw = 4 ts = 4: */ +/* Small bzip2 deflate implementation, by Rob Landley (rob@landley.net). + + Based on bzip2 decompression code by Julian R Seward (jseward@acm.org), + which also acknowledges contributions by Mike Burrows, David Wheeler, + Peter Fenwick, Alistair Moffat, Radford Neal, Ian H. Witten, + Robert Sedgewick, and Jon L. Bentley. + + This code is licensed under the LGPLv2: + LGPL (http://www.gnu.org/copyleft/lgpl.html +*/ + +/* + Size and speed optimizations by Manuel Novoa III (mjn3@codepoet.org). + + More efficient reading of Huffman codes, a streamlined read_bunzip() + function, and various other tweaks. In (limited) tests, approximately + 20% faster than bzcat on x86 and about 10% faster on arm. + + Note that about 2/3 of the time is spent in read_unzip() reversing + the Burrows-Wheeler transformation. Much of that time is delay + resulting from cache misses. + + I would ask that anyone benefiting from this work, especially those + using it in commercial products, consider making a donation to my local + non-profit hospice organization in the name of the woman I loved, who + passed away Feb. 12, 2003. + + In memory of Toni W. Hagan + + Hospice of Acadiana, Inc. + 2600 Johnston St., Suite 200 + Lafayette, LA 70503-3240 + + Phone (337) 232-1234 or 1-800-738-2226 + Fax (337) 232-1297 + + http://www.hospiceacadiana.com/ + + Manuel + */ + +/* + Made it fit for running in Linux Kernel by Alain Knaff (alain@knaff.lu) +*/ + + +#ifndef STATIC +#include +#endif /* !STATIC */ + +#include + +#ifndef INT_MAX +#define INT_MAX 0x7fffffff +#endif + +/* Constants for Huffman coding */ +#define MAX_GROUPS 6 +#define GROUP_SIZE 50 /* 64 would have been more efficient */ +#define MAX_HUFCODE_BITS 20 /* Longest Huffman code allowed */ +#define MAX_SYMBOLS 258 /* 256 literals + RUNA + RUNB */ +#define SYMBOL_RUNA 0 +#define SYMBOL_RUNB 1 + +/* Status return values */ +#define RETVAL_OK 0 +#define RETVAL_LAST_BLOCK (-1) +#define RETVAL_NOT_BZIP_DATA (-2) +#define RETVAL_UNEXPECTED_INPUT_EOF (-3) +#define RETVAL_UNEXPECTED_OUTPUT_EOF (-4) +#define RETVAL_DATA_ERROR (-5) +#define RETVAL_OUT_OF_MEMORY (-6) +#define RETVAL_OBSOLETE_INPUT (-7) + +/* Other housekeeping constants */ +#define BZIP2_IOBUF_SIZE 4096 + +/* This is what we know about each Huffman coding group */ +struct group_data { + /* We have an extra slot at the end of limit[] for a sentinal value. */ + int limit[MAX_HUFCODE_BITS+1]; + int base[MAX_HUFCODE_BITS]; + int permute[MAX_SYMBOLS]; + int minLen, maxLen; +}; + +/* Structure holding all the housekeeping data, including IO buffers and + memory that persists between calls to bunzip */ +struct bunzip_data { + /* State for interrupting output loop */ + int writeCopies, writePos, writeRunCountdown, writeCount, writeCurrent; + /* I/O tracking data (file handles, buffers, positions, etc.) */ + int (*fill)(void*, unsigned int); + int inbufCount, inbufPos /*, outbufPos*/; + unsigned char *inbuf /*,*outbuf*/; + unsigned int inbufBitCount, inbufBits; + /* The CRC values stored in the block header and calculated from the + data */ + unsigned int crc32Table[256], headerCRC, totalCRC, writeCRC; + /* Intermediate buffer and its size (in bytes) */ + unsigned int *dbuf, dbufSize; + /* These things are a bit too big to go on the stack */ + unsigned char selectors[32768]; /* nSelectors = 15 bits */ + struct group_data groups[MAX_GROUPS]; /* Huffman coding tables */ + int io_error; /* non-zero if we have IO error */ +}; + + +/* Return the next nnn bits of input. All reads from the compressed input + are done through this function. All reads are big endian */ +static unsigned int INIT get_bits(struct bunzip_data *bd, char bits_wanted) +{ + unsigned int bits = 0; + + /* If we need to get more data from the byte buffer, do so. + (Loop getting one byte at a time to enforce endianness and avoid + unaligned access.) */ + while (bd->inbufBitCount < bits_wanted) { + /* If we need to read more data from file into byte buffer, do + so */ + if (bd->inbufPos == bd->inbufCount) { + if (bd->io_error) + return 0; + bd->inbufCount = bd->fill(bd->inbuf, BZIP2_IOBUF_SIZE); + if (bd->inbufCount <= 0) { + bd->io_error = RETVAL_UNEXPECTED_INPUT_EOF; + return 0; + } + bd->inbufPos = 0; + } + /* Avoid 32-bit overflow (dump bit buffer to top of output) */ + if (bd->inbufBitCount >= 24) { + bits = bd->inbufBits&((1 << bd->inbufBitCount)-1); + bits_wanted -= bd->inbufBitCount; + bits <<= bits_wanted; + bd->inbufBitCount = 0; + } + /* Grab next 8 bits of input from buffer. */ + bd->inbufBits = (bd->inbufBits << 8)|bd->inbuf[bd->inbufPos++]; + bd->inbufBitCount += 8; + } + /* Calculate result */ + bd->inbufBitCount -= bits_wanted; + bits |= (bd->inbufBits >> bd->inbufBitCount)&((1 << bits_wanted)-1); + + return bits; +} + +/* Unpacks the next block and sets up for the inverse burrows-wheeler step. */ + +static int INIT get_next_block(struct bunzip_data *bd) +{ + struct group_data *hufGroup = NULL; + int *base = NULL; + int *limit = NULL; + int dbufCount, nextSym, dbufSize, groupCount, selector, + i, j, k, t, runPos, symCount, symTotal, nSelectors, + byteCount[256]; + unsigned char uc, symToByte[256], mtfSymbol[256], *selectors; + unsigned int *dbuf, origPtr; + + dbuf = bd->dbuf; + dbufSize = bd->dbufSize; + selectors = bd->selectors; + + /* Read in header signature and CRC, then validate signature. + (last block signature means CRC is for whole file, return now) */ + i = get_bits(bd, 24); + j = get_bits(bd, 24); + bd->headerCRC = get_bits(bd, 32); + if ((i == 0x177245) && (j == 0x385090)) + return RETVAL_LAST_BLOCK; + if ((i != 0x314159) || (j != 0x265359)) + return RETVAL_NOT_BZIP_DATA; + /* We can add support for blockRandomised if anybody complains. + There was some code for this in busybox 1.0.0-pre3, but nobody ever + noticed that it didn't actually work. */ + if (get_bits(bd, 1)) + return RETVAL_OBSOLETE_INPUT; + origPtr = get_bits(bd, 24); + if (origPtr > dbufSize) + return RETVAL_DATA_ERROR; + /* mapping table: if some byte values are never used (encoding things + like ascii text), the compression code removes the gaps to have fewer + symbols to deal with, and writes a sparse bitfield indicating which + values were present. We make a translation table to convert the + symbols back to the corresponding bytes. */ + t = get_bits(bd, 16); + symTotal = 0; + for (i = 0; i < 16; i++) { + if (t&(1 << (15-i))) { + k = get_bits(bd, 16); + for (j = 0; j < 16; j++) + if (k&(1 << (15-j))) + symToByte[symTotal++] = (16*i)+j; + } + } + /* How many different Huffman coding groups does this block use? */ + groupCount = get_bits(bd, 3); + if (groupCount < 2 || groupCount > MAX_GROUPS) + return RETVAL_DATA_ERROR; + /* nSelectors: Every GROUP_SIZE many symbols we select a new + Huffman coding group. Read in the group selector list, + which is stored as MTF encoded bit runs. (MTF = Move To + Front, as each value is used it's moved to the start of the + list.) */ + nSelectors = get_bits(bd, 15); + if (!nSelectors) + return RETVAL_DATA_ERROR; + for (i = 0; i < groupCount; i++) + mtfSymbol[i] = i; + for (i = 0; i < nSelectors; i++) { + /* Get next value */ + for (j = 0; get_bits(bd, 1); j++) + if (j >= groupCount) + return RETVAL_DATA_ERROR; + /* Decode MTF to get the next selector */ + uc = mtfSymbol[j]; + for (; j; j--) + mtfSymbol[j] = mtfSymbol[j-1]; + mtfSymbol[0] = selectors[i] = uc; + } + /* Read the Huffman coding tables for each group, which code + for symTotal literal symbols, plus two run symbols (RUNA, + RUNB) */ + symCount = symTotal+2; + for (j = 0; j < groupCount; j++) { + unsigned char length[MAX_SYMBOLS], temp[MAX_HUFCODE_BITS+1]; + int minLen, maxLen, pp; + /* Read Huffman code lengths for each symbol. They're + stored in a way similar to mtf; record a starting + value for the first symbol, and an offset from the + previous value for everys symbol after that. + (Subtracting 1 before the loop and then adding it + back at the end is an optimization that makes the + test inside the loop simpler: symbol length 0 + becomes negative, so an unsigned inequality catches + it.) */ + t = get_bits(bd, 5)-1; + for (i = 0; i < symCount; i++) { + for (;;) { + if (((unsigned)t) > (MAX_HUFCODE_BITS-1)) + return RETVAL_DATA_ERROR; + + /* If first bit is 0, stop. Else + second bit indicates whether to + increment or decrement the value. + Optimization: grab 2 bits and unget + the second if the first was 0. */ + + k = get_bits(bd, 2); + if (k < 2) { + bd->inbufBitCount++; + break; + } + /* Add one if second bit 1, else + * subtract 1. Avoids if/else */ + t += (((k+1)&2)-1); + } + /* Correct for the initial -1, to get the + * final symbol length */ + length[i] = t+1; + } + /* Find largest and smallest lengths in this group */ + minLen = maxLen = length[0]; + + for (i = 1; i < symCount; i++) { + if (length[i] > maxLen) + maxLen = length[i]; + else if (length[i] < minLen) + minLen = length[i]; + } + + /* Calculate permute[], base[], and limit[] tables from + * length[]. + * + * permute[] is the lookup table for converting + * Huffman coded symbols into decoded symbols. base[] + * is the amount to subtract from the value of a + * Huffman symbol of a given length when using + * permute[]. + * + * limit[] indicates the largest numerical value a + * symbol with a given number of bits can have. This + * is how the Huffman codes can vary in length: each + * code with a value > limit[length] needs another + * bit. + */ + hufGroup = bd->groups+j; + hufGroup->minLen = minLen; + hufGroup->maxLen = maxLen; + /* Note that minLen can't be smaller than 1, so we + adjust the base and limit array pointers so we're + not always wasting the first entry. We do this + again when using them (during symbol decoding).*/ + base = hufGroup->base-1; + limit = hufGroup->limit-1; + /* Calculate permute[]. Concurently, initialize + * temp[] and limit[]. */ + pp = 0; + for (i = minLen; i <= maxLen; i++) { + temp[i] = limit[i] = 0; + for (t = 0; t < symCount; t++) + if (length[t] == i) + hufGroup->permute[pp++] = t; + } + /* Count symbols coded for at each bit length */ + for (i = 0; i < symCount; i++) + temp[length[i]]++; + /* Calculate limit[] (the largest symbol-coding value + *at each bit length, which is (previous limit << + *1)+symbols at this level), and base[] (number of + *symbols to ignore at each bit length, which is limit + *minus the cumulative count of symbols coded for + *already). */ + pp = t = 0; + for (i = minLen; i < maxLen; i++) { + pp += temp[i]; + /* We read the largest possible symbol size + and then unget bits after determining how + many we need, and those extra bits could be + set to anything. (They're noise from + future symbols.) At each level we're + really only interested in the first few + bits, so here we set all the trailing + to-be-ignored bits to 1 so they don't + affect the value > limit[length] + comparison. */ + limit[i] = (pp << (maxLen - i)) - 1; + pp <<= 1; + base[i+1] = pp-(t += temp[i]); + } + limit[maxLen+1] = INT_MAX; /* Sentinal value for + * reading next sym. */ + limit[maxLen] = pp+temp[maxLen]-1; + base[minLen] = 0; + } + /* We've finished reading and digesting the block header. Now + read this block's Huffman coded symbols from the file and + undo the Huffman coding and run length encoding, saving the + result into dbuf[dbufCount++] = uc */ + + /* Initialize symbol occurrence counters and symbol Move To + * Front table */ + for (i = 0; i < 256; i++) { + byteCount[i] = 0; + mtfSymbol[i] = (unsigned char)i; + } + /* Loop through compressed symbols. */ + runPos = dbufCount = symCount = selector = 0; + for (;;) { + /* Determine which Huffman coding group to use. */ + if (!(symCount--)) { + symCount = GROUP_SIZE-1; + if (selector >= nSelectors) + return RETVAL_DATA_ERROR; + hufGroup = bd->groups+selectors[selector++]; + base = hufGroup->base-1; + limit = hufGroup->limit-1; + } + /* Read next Huffman-coded symbol. */ + /* Note: It is far cheaper to read maxLen bits and + back up than it is to read minLen bits and then an + additional bit at a time, testing as we go. + Because there is a trailing last block (with file + CRC), there is no danger of the overread causing an + unexpected EOF for a valid compressed file. As a + further optimization, we do the read inline + (falling back to a call to get_bits if the buffer + runs dry). The following (up to got_huff_bits:) is + equivalent to j = get_bits(bd, hufGroup->maxLen); + */ + while (bd->inbufBitCount < hufGroup->maxLen) { + if (bd->inbufPos == bd->inbufCount) { + j = get_bits(bd, hufGroup->maxLen); + goto got_huff_bits; + } + bd->inbufBits = + (bd->inbufBits << 8)|bd->inbuf[bd->inbufPos++]; + bd->inbufBitCount += 8; + }; + bd->inbufBitCount -= hufGroup->maxLen; + j = (bd->inbufBits >> bd->inbufBitCount)& + ((1 << hufGroup->maxLen)-1); +got_huff_bits: + /* Figure how how many bits are in next symbol and + * unget extras */ + i = hufGroup->minLen; + while (j > limit[i]) + ++i; + bd->inbufBitCount += (hufGroup->maxLen - i); + /* Huffman decode value to get nextSym (with bounds checking) */ + if ((i > hufGroup->maxLen) + || (((unsigned)(j = (j>>(hufGroup->maxLen-i))-base[i])) + >= MAX_SYMBOLS)) + return RETVAL_DATA_ERROR; + nextSym = hufGroup->permute[j]; + /* We have now decoded the symbol, which indicates + either a new literal byte, or a repeated run of the + most recent literal byte. First, check if nextSym + indicates a repeated run, and if so loop collecting + how many times to repeat the last literal. */ + if (((unsigned)nextSym) <= SYMBOL_RUNB) { /* RUNA or RUNB */ + /* If this is the start of a new run, zero out + * counter */ + if (!runPos) { + runPos = 1; + t = 0; + } + /* Neat trick that saves 1 symbol: instead of + or-ing 0 or 1 at each bit position, add 1 + or 2 instead. For example, 1011 is 1 << 0 + + 1 << 1 + 2 << 2. 1010 is 2 << 0 + 2 << 1 + + 1 << 2. You can make any bit pattern + that way using 1 less symbol than the basic + or 0/1 method (except all bits 0, which + would use no symbols, but a run of length 0 + doesn't mean anything in this context). + Thus space is saved. */ + t += (runPos << nextSym); + /* +runPos if RUNA; +2*runPos if RUNB */ + + runPos <<= 1; + continue; + } + /* When we hit the first non-run symbol after a run, + we now know how many times to repeat the last + literal, so append that many copies to our buffer + of decoded symbols (dbuf) now. (The last literal + used is the one at the head of the mtfSymbol + array.) */ + if (runPos) { + runPos = 0; + if (dbufCount+t >= dbufSize) + return RETVAL_DATA_ERROR; + + uc = symToByte[mtfSymbol[0]]; + byteCount[uc] += t; + while (t--) + dbuf[dbufCount++] = uc; + } + /* Is this the terminating symbol? */ + if (nextSym > symTotal) + break; + /* At this point, nextSym indicates a new literal + character. Subtract one to get the position in the + MTF array at which this literal is currently to be + found. (Note that the result can't be -1 or 0, + because 0 and 1 are RUNA and RUNB. But another + instance of the first symbol in the mtf array, + position 0, would have been handled as part of a + run above. Therefore 1 unused mtf position minus 2 + non-literal nextSym values equals -1.) */ + if (dbufCount >= dbufSize) + return RETVAL_DATA_ERROR; + i = nextSym - 1; + uc = mtfSymbol[i]; + /* Adjust the MTF array. Since we typically expect to + *move only a small number of symbols, and are bound + *by 256 in any case, using memmove here would + *typically be bigger and slower due to function call + *overhead and other assorted setup costs. */ + do { + mtfSymbol[i] = mtfSymbol[i-1]; + } while (--i); + mtfSymbol[0] = uc; + uc = symToByte[uc]; + /* We have our literal byte. Save it into dbuf. */ + byteCount[uc]++; + dbuf[dbufCount++] = (unsigned int)uc; + } + /* At this point, we've read all the Huffman-coded symbols + (and repeated runs) for this block from the input stream, + and decoded them into the intermediate buffer. There are + dbufCount many decoded bytes in dbuf[]. Now undo the + Burrows-Wheeler transform on dbuf. See + http://dogma.net/markn/articles/bwt/bwt.htm + */ + /* Turn byteCount into cumulative occurrence counts of 0 to n-1. */ + j = 0; + for (i = 0; i < 256; i++) { + k = j+byteCount[i]; + byteCount[i] = j; + j = k; + } + /* Figure out what order dbuf would be in if we sorted it. */ + for (i = 0; i < dbufCount; i++) { + uc = (unsigned char)(dbuf[i] & 0xff); + dbuf[byteCount[uc]] |= (i << 8); + byteCount[uc]++; + } + /* Decode first byte by hand to initialize "previous" byte. + Note that it doesn't get output, and if the first three + characters are identical it doesn't qualify as a run (hence + writeRunCountdown = 5). */ + if (dbufCount) { + if (origPtr >= dbufCount) + return RETVAL_DATA_ERROR; + bd->writePos = dbuf[origPtr]; + bd->writeCurrent = (unsigned char)(bd->writePos&0xff); + bd->writePos >>= 8; + bd->writeRunCountdown = 5; + } + bd->writeCount = dbufCount; + + return RETVAL_OK; +} + +/* Undo burrows-wheeler transform on intermediate buffer to produce output. + If start_bunzip was initialized with out_fd =-1, then up to len bytes of + data are written to outbuf. Return value is number of bytes written or + error (all errors are negative numbers). If out_fd!=-1, outbuf and len + are ignored, data is written to out_fd and return is RETVAL_OK or error. +*/ + +static int INIT read_bunzip(struct bunzip_data *bd, char *outbuf, int len) +{ + const unsigned int *dbuf; + int pos, xcurrent, previous, gotcount; + + /* If last read was short due to end of file, return last block now */ + if (bd->writeCount < 0) + return bd->writeCount; + + gotcount = 0; + dbuf = bd->dbuf; + pos = bd->writePos; + xcurrent = bd->writeCurrent; + + /* We will always have pending decoded data to write into the output + buffer unless this is the very first call (in which case we haven't + Huffman-decoded a block into the intermediate buffer yet). */ + + if (bd->writeCopies) { + /* Inside the loop, writeCopies means extra copies (beyond 1) */ + --bd->writeCopies; + /* Loop outputting bytes */ + for (;;) { + /* If the output buffer is full, snapshot + * state and return */ + if (gotcount >= len) { + bd->writePos = pos; + bd->writeCurrent = xcurrent; + bd->writeCopies++; + return len; + } + /* Write next byte into output buffer, updating CRC */ + outbuf[gotcount++] = xcurrent; + bd->writeCRC = (((bd->writeCRC) << 8) + ^bd->crc32Table[((bd->writeCRC) >> 24) + ^xcurrent]); + /* Loop now if we're outputting multiple + * copies of this byte */ + if (bd->writeCopies) { + --bd->writeCopies; + continue; + } +decode_next_byte: + if (!bd->writeCount--) + break; + /* Follow sequence vector to undo + * Burrows-Wheeler transform */ + previous = xcurrent; + pos = dbuf[pos]; + xcurrent = pos&0xff; + pos >>= 8; + /* After 3 consecutive copies of the same + byte, the 4th is a repeat count. We count + down from 4 instead *of counting up because + testing for non-zero is faster */ + if (--bd->writeRunCountdown) { + if (xcurrent != previous) + bd->writeRunCountdown = 4; + } else { + /* We have a repeated run, this byte + * indicates the count */ + bd->writeCopies = xcurrent; + xcurrent = previous; + bd->writeRunCountdown = 5; + /* Sometimes there are just 3 bytes + * (run length 0) */ + if (!bd->writeCopies) + goto decode_next_byte; + /* Subtract the 1 copy we'd output + * anyway to get extras */ + --bd->writeCopies; + } + } + /* Decompression of this block completed successfully */ + bd->writeCRC = ~bd->writeCRC; + bd->totalCRC = ((bd->totalCRC << 1) | + (bd->totalCRC >> 31)) ^ bd->writeCRC; + /* If this block had a CRC error, force file level CRC error. */ + if (bd->writeCRC != bd->headerCRC) { + bd->totalCRC = bd->headerCRC+1; + return RETVAL_LAST_BLOCK; + } + } + + /* Refill the intermediate buffer by Huffman-decoding next + * block of input */ + /* (previous is just a convenient unused temp variable here) */ + previous = get_next_block(bd); + if (previous) { + bd->writeCount = previous; + return (previous != RETVAL_LAST_BLOCK) ? previous : gotcount; + } + bd->writeCRC = 0xffffffffUL; + pos = bd->writePos; + xcurrent = bd->writeCurrent; + goto decode_next_byte; +} + +static int INIT nofill(void *buf, unsigned int len) +{ + return -1; +} + +/* Allocate the structure, read file header. If in_fd ==-1, inbuf must contain + a complete bunzip file (len bytes long). If in_fd!=-1, inbuf and len are + ignored, and data is read from file handle into temporary buffer. */ +static int INIT start_bunzip(struct bunzip_data **bdp, void *inbuf, int len, + int (*fill)(void*, unsigned int)) +{ + struct bunzip_data *bd; + unsigned int i, j, c; + const unsigned int BZh0 = + (((unsigned int)'B') << 24)+(((unsigned int)'Z') << 16) + +(((unsigned int)'h') << 8)+(unsigned int)'0'; + + /* Figure out how much data to allocate */ + i = sizeof(struct bunzip_data); + + /* Allocate bunzip_data. Most fields initialize to zero. */ + bd = *bdp = malloc(i); + memset(bd, 0, sizeof(struct bunzip_data)); + /* Setup input buffer */ + bd->inbuf = inbuf; + bd->inbufCount = len; + if (fill != NULL) + bd->fill = fill; + else + bd->fill = nofill; + + /* Init the CRC32 table (big endian) */ + for (i = 0; i < 256; i++) { + c = i << 24; + for (j = 8; j; j--) + c = c&0x80000000 ? (c << 1)^0x04c11db7 : (c << 1); + bd->crc32Table[i] = c; + } + + /* Ensure that file starts with "BZh['1'-'9']." */ + i = get_bits(bd, 32); + if (((unsigned int)(i-BZh0-1)) >= 9) + return RETVAL_NOT_BZIP_DATA; + + /* Fourth byte (ascii '1'-'9'), indicates block size in units of 100k of + uncompressed data. Allocate intermediate buffer for block. */ + bd->dbufSize = 100000*(i-BZh0); + + bd->dbuf = large_malloc(bd->dbufSize * sizeof(int)); + return RETVAL_OK; +} + +/* Example usage: decompress src_fd to dst_fd. (Stops at end of bzip2 data, + not end of file.) */ +STATIC int INIT bunzip2(unsigned char *buf, int len, + int(*fill)(void*, unsigned int), + int(*flush)(void*, unsigned int), + unsigned char *outbuf, + int *pos, + void(*error_fn)(char *x)) +{ + struct bunzip_data *bd; + int i = -1; + unsigned char *inbuf; + + set_error_fn(error_fn); + if (flush) + outbuf = malloc(BZIP2_IOBUF_SIZE); + else + len -= 4; /* Uncompressed size hack active in pre-boot + environment */ + if (!outbuf) { + error("Could not allocate output bufer"); + return -1; + } + if (buf) + inbuf = buf; + else + inbuf = malloc(BZIP2_IOBUF_SIZE); + if (!inbuf) { + error("Could not allocate input bufer"); + goto exit_0; + } + i = start_bunzip(&bd, inbuf, len, fill); + if (!i) { + for (;;) { + i = read_bunzip(bd, outbuf, BZIP2_IOBUF_SIZE); + if (i <= 0) + break; + if (!flush) + outbuf += i; + else + if (i != flush(outbuf, i)) { + i = RETVAL_UNEXPECTED_OUTPUT_EOF; + break; + } + } + } + /* Check CRC and release memory */ + if (i == RETVAL_LAST_BLOCK) { + if (bd->headerCRC != bd->totalCRC) + error("Data integrity error when decompressing."); + else + i = RETVAL_OK; + } else if (i == RETVAL_UNEXPECTED_OUTPUT_EOF) { + error("Compressed file ends unexpectedly"); + } + if (bd->dbuf) + large_free(bd->dbuf); + if (pos) + *pos = bd->inbufPos; + free(bd); + if (!buf) + free(inbuf); +exit_0: + if (flush) + free(outbuf); + return i; +} + +#define decompress bunzip2 diff --git a/lib/decompress_inflate.c b/lib/decompress_inflate.c new file mode 100644 index 000000000000..163e66aea5f6 --- /dev/null +++ b/lib/decompress_inflate.c @@ -0,0 +1,167 @@ +#ifdef STATIC +/* Pre-boot environment: included */ + +/* prevent inclusion of _LINUX_KERNEL_H in pre-boot environment: lots + * errors about console_printk etc... on ARM */ +#define _LINUX_KERNEL_H + +#include "zlib_inflate/inftrees.c" +#include "zlib_inflate/inffast.c" +#include "zlib_inflate/inflate.c" + +#else /* STATIC */ +/* initramfs et al: linked */ + +#include + +#include "zlib_inflate/inftrees.h" +#include "zlib_inflate/inffast.h" +#include "zlib_inflate/inflate.h" + +#include "zlib_inflate/infutil.h" + +#endif /* STATIC */ + +#include + +#define INBUF_LEN (16*1024) + +/* Included from initramfs et al code */ +STATIC int INIT gunzip(unsigned char *buf, int len, + int(*fill)(void*, unsigned int), + int(*flush)(void*, unsigned int), + unsigned char *out_buf, + int *pos, + void(*error_fn)(char *x)) { + u8 *zbuf; + struct z_stream_s *strm; + int rc; + size_t out_len; + + set_error_fn(error_fn); + rc = -1; + if (flush) { + out_len = 0x8100; /* 32 K */ + out_buf = malloc(out_len); + } else { + out_len = 0x7fffffff; /* no limit */ + } + if (!out_buf) { + error("Out of memory while allocating output buffer"); + goto gunzip_nomem1; + } + + if (buf) + zbuf = buf; + else { + zbuf = malloc(INBUF_LEN); + len = 0; + } + if (!zbuf) { + error("Out of memory while allocating input buffer"); + goto gunzip_nomem2; + } + + strm = malloc(sizeof(*strm)); + if (strm == NULL) { + error("Out of memory while allocating z_stream"); + goto gunzip_nomem3; + } + + strm->workspace = malloc(flush ? zlib_inflate_workspacesize() : + sizeof(struct inflate_state)); + if (strm->workspace == NULL) { + error("Out of memory while allocating workspace"); + goto gunzip_nomem4; + } + + if (len == 0) + len = fill(zbuf, INBUF_LEN); + + /* verify the gzip header */ + if (len < 10 || + zbuf[0] != 0x1f || zbuf[1] != 0x8b || zbuf[2] != 0x08) { + if (pos) + *pos = 0; + error("Not a gzip file"); + goto gunzip_5; + } + + /* skip over gzip header (1f,8b,08... 10 bytes total + + * possible asciz filename) + */ + strm->next_in = zbuf + 10; + /* skip over asciz filename */ + if (zbuf[3] & 0x8) { + while (strm->next_in[0]) + strm->next_in++; + strm->next_in++; + } + strm->avail_in = len - 10; + + strm->next_out = out_buf; + strm->avail_out = out_len; + + rc = zlib_inflateInit2(strm, -MAX_WBITS); + + if (!flush) { + WS(strm)->inflate_state.wsize = 0; + WS(strm)->inflate_state.window = NULL; + } + + while (rc == Z_OK) { + if (strm->avail_in == 0) { + /* TODO: handle case where both pos and fill are set */ + len = fill(zbuf, INBUF_LEN); + if (len < 0) { + rc = -1; + error("read error"); + break; + } + strm->next_in = zbuf; + strm->avail_in = len; + } + rc = zlib_inflate(strm, 0); + + /* Write any data generated */ + if (flush && strm->next_out > out_buf) { + int l = strm->next_out - out_buf; + if (l != flush(out_buf, l)) { + rc = -1; + error("write error"); + break; + } + strm->next_out = out_buf; + strm->avail_out = out_len; + } + + /* after Z_FINISH, only Z_STREAM_END is "we unpacked it all" */ + if (rc == Z_STREAM_END) { + rc = 0; + break; + } else if (rc != Z_OK) { + error("uncompression error"); + rc = -1; + } + } + + zlib_inflateEnd(strm); + if (pos) + /* add + 8 to skip over trailer */ + *pos = strm->next_in - zbuf+8; + +gunzip_5: + free(strm->workspace); +gunzip_nomem4: + free(strm); +gunzip_nomem3: + if (!buf) + free(zbuf); +gunzip_nomem2: + if (flush) + free(out_buf); +gunzip_nomem1: + return rc; /* returns Z_OK (0) if successful */ +} + +#define decompress gunzip diff --git a/lib/decompress_unlzma.c b/lib/decompress_unlzma.c new file mode 100644 index 000000000000..546f2f4c157e --- /dev/null +++ b/lib/decompress_unlzma.c @@ -0,0 +1,647 @@ +/* Lzma decompressor for Linux kernel. Shamelessly snarfed + *from busybox 1.1.1 + * + *Linux kernel adaptation + *Copyright (C) 2006 Alain < alain@knaff.lu > + * + *Based on small lzma deflate implementation/Small range coder + *implementation for lzma. + *Copyright (C) 2006 Aurelien Jacobs < aurel@gnuage.org > + * + *Based on LzmaDecode.c from the LZMA SDK 4.22 (http://www.7-zip.org/) + *Copyright (C) 1999-2005 Igor Pavlov + * + *Copyrights of the parts, see headers below. + * + * + *This program is free software; you can redistribute it and/or + *modify it under the terms of the GNU Lesser General Public + *License as published by the Free Software Foundation; either + *version 2.1 of the License, or (at your option) any later version. + * + *This program is distributed in the hope that it will be useful, + *but WITHOUT ANY WARRANTY; without even the implied warranty of + *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + *Lesser General Public License for more details. + * + *You should have received a copy of the GNU Lesser General Public + *License along with this library; if not, write to the Free Software + *Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef STATIC +#include +#endif /* STATIC */ + +#include + +#define MIN(a, b) (((a) < (b)) ? (a) : (b)) + +static long long INIT read_int(unsigned char *ptr, int size) +{ + int i; + long long ret = 0; + + for (i = 0; i < size; i++) + ret = (ret << 8) | ptr[size-i-1]; + return ret; +} + +#define ENDIAN_CONVERT(x) \ + x = (typeof(x))read_int((unsigned char *)&x, sizeof(x)) + + +/* Small range coder implementation for lzma. + *Copyright (C) 2006 Aurelien Jacobs < aurel@gnuage.org > + * + *Based on LzmaDecode.c from the LZMA SDK 4.22 (http://www.7-zip.org/) + *Copyright (c) 1999-2005 Igor Pavlov + */ + +#include + +#define LZMA_IOBUF_SIZE 0x10000 + +struct rc { + int (*fill)(void*, unsigned int); + uint8_t *ptr; + uint8_t *buffer; + uint8_t *buffer_end; + int buffer_size; + uint32_t code; + uint32_t range; + uint32_t bound; +}; + + +#define RC_TOP_BITS 24 +#define RC_MOVE_BITS 5 +#define RC_MODEL_TOTAL_BITS 11 + + +/* Called twice: once at startup and once in rc_normalize() */ +static void INIT rc_read(struct rc *rc) +{ + rc->buffer_size = rc->fill((char *)rc->buffer, LZMA_IOBUF_SIZE); + if (rc->buffer_size <= 0) + error("unexpected EOF"); + rc->ptr = rc->buffer; + rc->buffer_end = rc->buffer + rc->buffer_size; +} + +/* Called once */ +static inline void INIT rc_init(struct rc *rc, + int (*fill)(void*, unsigned int), + char *buffer, int buffer_size) +{ + rc->fill = fill; + rc->buffer = (uint8_t *)buffer; + rc->buffer_size = buffer_size; + rc->buffer_end = rc->buffer + rc->buffer_size; + rc->ptr = rc->buffer; + + rc->code = 0; + rc->range = 0xFFFFFFFF; +} + +static inline void INIT rc_init_code(struct rc *rc) +{ + int i; + + for (i = 0; i < 5; i++) { + if (rc->ptr >= rc->buffer_end) + rc_read(rc); + rc->code = (rc->code << 8) | *rc->ptr++; + } +} + + +/* Called once. TODO: bb_maybe_free() */ +static inline void INIT rc_free(struct rc *rc) +{ + free(rc->buffer); +} + +/* Called twice, but one callsite is in inline'd rc_is_bit_0_helper() */ +static void INIT rc_do_normalize(struct rc *rc) +{ + if (rc->ptr >= rc->buffer_end) + rc_read(rc); + rc->range <<= 8; + rc->code = (rc->code << 8) | *rc->ptr++; +} +static inline void INIT rc_normalize(struct rc *rc) +{ + if (rc->range < (1 << RC_TOP_BITS)) + rc_do_normalize(rc); +} + +/* Called 9 times */ +/* Why rc_is_bit_0_helper exists? + *Because we want to always expose (rc->code < rc->bound) to optimizer + */ +static inline uint32_t INIT rc_is_bit_0_helper(struct rc *rc, uint16_t *p) +{ + rc_normalize(rc); + rc->bound = *p * (rc->range >> RC_MODEL_TOTAL_BITS); + return rc->bound; +} +static inline int INIT rc_is_bit_0(struct rc *rc, uint16_t *p) +{ + uint32_t t = rc_is_bit_0_helper(rc, p); + return rc->code < t; +} + +/* Called ~10 times, but very small, thus inlined */ +static inline void INIT rc_update_bit_0(struct rc *rc, uint16_t *p) +{ + rc->range = rc->bound; + *p += ((1 << RC_MODEL_TOTAL_BITS) - *p) >> RC_MOVE_BITS; +} +static inline void rc_update_bit_1(struct rc *rc, uint16_t *p) +{ + rc->range -= rc->bound; + rc->code -= rc->bound; + *p -= *p >> RC_MOVE_BITS; +} + +/* Called 4 times in unlzma loop */ +static int INIT rc_get_bit(struct rc *rc, uint16_t *p, int *symbol) +{ + if (rc_is_bit_0(rc, p)) { + rc_update_bit_0(rc, p); + *symbol *= 2; + return 0; + } else { + rc_update_bit_1(rc, p); + *symbol = *symbol * 2 + 1; + return 1; + } +} + +/* Called once */ +static inline int INIT rc_direct_bit(struct rc *rc) +{ + rc_normalize(rc); + rc->range >>= 1; + if (rc->code >= rc->range) { + rc->code -= rc->range; + return 1; + } + return 0; +} + +/* Called twice */ +static inline void INIT +rc_bit_tree_decode(struct rc *rc, uint16_t *p, int num_levels, int *symbol) +{ + int i = num_levels; + + *symbol = 1; + while (i--) + rc_get_bit(rc, p + *symbol, symbol); + *symbol -= 1 << num_levels; +} + + +/* + * Small lzma deflate implementation. + * Copyright (C) 2006 Aurelien Jacobs < aurel@gnuage.org > + * + * Based on LzmaDecode.c from the LZMA SDK 4.22 (http://www.7-zip.org/) + * Copyright (C) 1999-2005 Igor Pavlov + */ + + +struct lzma_header { + uint8_t pos; + uint32_t dict_size; + uint64_t dst_size; +} __attribute__ ((packed)) ; + + +#define LZMA_BASE_SIZE 1846 +#define LZMA_LIT_SIZE 768 + +#define LZMA_NUM_POS_BITS_MAX 4 + +#define LZMA_LEN_NUM_LOW_BITS 3 +#define LZMA_LEN_NUM_MID_BITS 3 +#define LZMA_LEN_NUM_HIGH_BITS 8 + +#define LZMA_LEN_CHOICE 0 +#define LZMA_LEN_CHOICE_2 (LZMA_LEN_CHOICE + 1) +#define LZMA_LEN_LOW (LZMA_LEN_CHOICE_2 + 1) +#define LZMA_LEN_MID (LZMA_LEN_LOW \ + + (1 << (LZMA_NUM_POS_BITS_MAX + LZMA_LEN_NUM_LOW_BITS))) +#define LZMA_LEN_HIGH (LZMA_LEN_MID \ + +(1 << (LZMA_NUM_POS_BITS_MAX + LZMA_LEN_NUM_MID_BITS))) +#define LZMA_NUM_LEN_PROBS (LZMA_LEN_HIGH + (1 << LZMA_LEN_NUM_HIGH_BITS)) + +#define LZMA_NUM_STATES 12 +#define LZMA_NUM_LIT_STATES 7 + +#define LZMA_START_POS_MODEL_INDEX 4 +#define LZMA_END_POS_MODEL_INDEX 14 +#define LZMA_NUM_FULL_DISTANCES (1 << (LZMA_END_POS_MODEL_INDEX >> 1)) + +#define LZMA_NUM_POS_SLOT_BITS 6 +#define LZMA_NUM_LEN_TO_POS_STATES 4 + +#define LZMA_NUM_ALIGN_BITS 4 + +#define LZMA_MATCH_MIN_LEN 2 + +#define LZMA_IS_MATCH 0 +#define LZMA_IS_REP (LZMA_IS_MATCH + (LZMA_NUM_STATES << LZMA_NUM_POS_BITS_MAX)) +#define LZMA_IS_REP_G0 (LZMA_IS_REP + LZMA_NUM_STATES) +#define LZMA_IS_REP_G1 (LZMA_IS_REP_G0 + LZMA_NUM_STATES) +#define LZMA_IS_REP_G2 (LZMA_IS_REP_G1 + LZMA_NUM_STATES) +#define LZMA_IS_REP_0_LONG (LZMA_IS_REP_G2 + LZMA_NUM_STATES) +#define LZMA_POS_SLOT (LZMA_IS_REP_0_LONG \ + + (LZMA_NUM_STATES << LZMA_NUM_POS_BITS_MAX)) +#define LZMA_SPEC_POS (LZMA_POS_SLOT \ + +(LZMA_NUM_LEN_TO_POS_STATES << LZMA_NUM_POS_SLOT_BITS)) +#define LZMA_ALIGN (LZMA_SPEC_POS \ + + LZMA_NUM_FULL_DISTANCES - LZMA_END_POS_MODEL_INDEX) +#define LZMA_LEN_CODER (LZMA_ALIGN + (1 << LZMA_NUM_ALIGN_BITS)) +#define LZMA_REP_LEN_CODER (LZMA_LEN_CODER + LZMA_NUM_LEN_PROBS) +#define LZMA_LITERAL (LZMA_REP_LEN_CODER + LZMA_NUM_LEN_PROBS) + + +struct writer { + uint8_t *buffer; + uint8_t previous_byte; + size_t buffer_pos; + int bufsize; + size_t global_pos; + int(*flush)(void*, unsigned int); + struct lzma_header *header; +}; + +struct cstate { + int state; + uint32_t rep0, rep1, rep2, rep3; +}; + +static inline size_t INIT get_pos(struct writer *wr) +{ + return + wr->global_pos + wr->buffer_pos; +} + +static inline uint8_t INIT peek_old_byte(struct writer *wr, + uint32_t offs) +{ + if (!wr->flush) { + int32_t pos; + while (offs > wr->header->dict_size) + offs -= wr->header->dict_size; + pos = wr->buffer_pos - offs; + return wr->buffer[pos]; + } else { + uint32_t pos = wr->buffer_pos - offs; + while (pos >= wr->header->dict_size) + pos += wr->header->dict_size; + return wr->buffer[pos]; + } + +} + +static inline void INIT write_byte(struct writer *wr, uint8_t byte) +{ + wr->buffer[wr->buffer_pos++] = wr->previous_byte = byte; + if (wr->flush && wr->buffer_pos == wr->header->dict_size) { + wr->buffer_pos = 0; + wr->global_pos += wr->header->dict_size; + wr->flush((char *)wr->buffer, wr->header->dict_size); + } +} + + +static inline void INIT copy_byte(struct writer *wr, uint32_t offs) +{ + write_byte(wr, peek_old_byte(wr, offs)); +} + +static inline void INIT copy_bytes(struct writer *wr, + uint32_t rep0, int len) +{ + do { + copy_byte(wr, rep0); + len--; + } while (len != 0 && wr->buffer_pos < wr->header->dst_size); +} + +static inline void INIT process_bit0(struct writer *wr, struct rc *rc, + struct cstate *cst, uint16_t *p, + int pos_state, uint16_t *prob, + int lc, uint32_t literal_pos_mask) { + int mi = 1; + rc_update_bit_0(rc, prob); + prob = (p + LZMA_LITERAL + + (LZMA_LIT_SIZE + * (((get_pos(wr) & literal_pos_mask) << lc) + + (wr->previous_byte >> (8 - lc)))) + ); + + if (cst->state >= LZMA_NUM_LIT_STATES) { + int match_byte = peek_old_byte(wr, cst->rep0); + do { + int bit; + uint16_t *prob_lit; + + match_byte <<= 1; + bit = match_byte & 0x100; + prob_lit = prob + 0x100 + bit + mi; + if (rc_get_bit(rc, prob_lit, &mi)) { + if (!bit) + break; + } else { + if (bit) + break; + } + } while (mi < 0x100); + } + while (mi < 0x100) { + uint16_t *prob_lit = prob + mi; + rc_get_bit(rc, prob_lit, &mi); + } + write_byte(wr, mi); + if (cst->state < 4) + cst->state = 0; + else if (cst->state < 10) + cst->state -= 3; + else + cst->state -= 6; +} + +static inline void INIT process_bit1(struct writer *wr, struct rc *rc, + struct cstate *cst, uint16_t *p, + int pos_state, uint16_t *prob) { + int offset; + uint16_t *prob_len; + int num_bits; + int len; + + rc_update_bit_1(rc, prob); + prob = p + LZMA_IS_REP + cst->state; + if (rc_is_bit_0(rc, prob)) { + rc_update_bit_0(rc, prob); + cst->rep3 = cst->rep2; + cst->rep2 = cst->rep1; + cst->rep1 = cst->rep0; + cst->state = cst->state < LZMA_NUM_LIT_STATES ? 0 : 3; + prob = p + LZMA_LEN_CODER; + } else { + rc_update_bit_1(rc, prob); + prob = p + LZMA_IS_REP_G0 + cst->state; + if (rc_is_bit_0(rc, prob)) { + rc_update_bit_0(rc, prob); + prob = (p + LZMA_IS_REP_0_LONG + + (cst->state << + LZMA_NUM_POS_BITS_MAX) + + pos_state); + if (rc_is_bit_0(rc, prob)) { + rc_update_bit_0(rc, prob); + + cst->state = cst->state < LZMA_NUM_LIT_STATES ? + 9 : 11; + copy_byte(wr, cst->rep0); + return; + } else { + rc_update_bit_1(rc, prob); + } + } else { + uint32_t distance; + + rc_update_bit_1(rc, prob); + prob = p + LZMA_IS_REP_G1 + cst->state; + if (rc_is_bit_0(rc, prob)) { + rc_update_bit_0(rc, prob); + distance = cst->rep1; + } else { + rc_update_bit_1(rc, prob); + prob = p + LZMA_IS_REP_G2 + cst->state; + if (rc_is_bit_0(rc, prob)) { + rc_update_bit_0(rc, prob); + distance = cst->rep2; + } else { + rc_update_bit_1(rc, prob); + distance = cst->rep3; + cst->rep3 = cst->rep2; + } + cst->rep2 = cst->rep1; + } + cst->rep1 = cst->rep0; + cst->rep0 = distance; + } + cst->state = cst->state < LZMA_NUM_LIT_STATES ? 8 : 11; + prob = p + LZMA_REP_LEN_CODER; + } + + prob_len = prob + LZMA_LEN_CHOICE; + if (rc_is_bit_0(rc, prob_len)) { + rc_update_bit_0(rc, prob_len); + prob_len = (prob + LZMA_LEN_LOW + + (pos_state << + LZMA_LEN_NUM_LOW_BITS)); + offset = 0; + num_bits = LZMA_LEN_NUM_LOW_BITS; + } else { + rc_update_bit_1(rc, prob_len); + prob_len = prob + LZMA_LEN_CHOICE_2; + if (rc_is_bit_0(rc, prob_len)) { + rc_update_bit_0(rc, prob_len); + prob_len = (prob + LZMA_LEN_MID + + (pos_state << + LZMA_LEN_NUM_MID_BITS)); + offset = 1 << LZMA_LEN_NUM_LOW_BITS; + num_bits = LZMA_LEN_NUM_MID_BITS; + } else { + rc_update_bit_1(rc, prob_len); + prob_len = prob + LZMA_LEN_HIGH; + offset = ((1 << LZMA_LEN_NUM_LOW_BITS) + + (1 << LZMA_LEN_NUM_MID_BITS)); + num_bits = LZMA_LEN_NUM_HIGH_BITS; + } + } + + rc_bit_tree_decode(rc, prob_len, num_bits, &len); + len += offset; + + if (cst->state < 4) { + int pos_slot; + + cst->state += LZMA_NUM_LIT_STATES; + prob = + p + LZMA_POS_SLOT + + ((len < + LZMA_NUM_LEN_TO_POS_STATES ? len : + LZMA_NUM_LEN_TO_POS_STATES - 1) + << LZMA_NUM_POS_SLOT_BITS); + rc_bit_tree_decode(rc, prob, + LZMA_NUM_POS_SLOT_BITS, + &pos_slot); + if (pos_slot >= LZMA_START_POS_MODEL_INDEX) { + int i, mi; + num_bits = (pos_slot >> 1) - 1; + cst->rep0 = 2 | (pos_slot & 1); + if (pos_slot < LZMA_END_POS_MODEL_INDEX) { + cst->rep0 <<= num_bits; + prob = p + LZMA_SPEC_POS + + cst->rep0 - pos_slot - 1; + } else { + num_bits -= LZMA_NUM_ALIGN_BITS; + while (num_bits--) + cst->rep0 = (cst->rep0 << 1) | + rc_direct_bit(rc); + prob = p + LZMA_ALIGN; + cst->rep0 <<= LZMA_NUM_ALIGN_BITS; + num_bits = LZMA_NUM_ALIGN_BITS; + } + i = 1; + mi = 1; + while (num_bits--) { + if (rc_get_bit(rc, prob + mi, &mi)) + cst->rep0 |= i; + i <<= 1; + } + } else + cst->rep0 = pos_slot; + if (++(cst->rep0) == 0) + return; + } + + len += LZMA_MATCH_MIN_LEN; + + copy_bytes(wr, cst->rep0, len); +} + + + +STATIC inline int INIT unlzma(unsigned char *buf, int in_len, + int(*fill)(void*, unsigned int), + int(*flush)(void*, unsigned int), + unsigned char *output, + int *posp, + void(*error_fn)(char *x) + ) +{ + struct lzma_header header; + int lc, pb, lp; + uint32_t pos_state_mask; + uint32_t literal_pos_mask; + uint16_t *p; + int num_probs; + struct rc rc; + int i, mi; + struct writer wr; + struct cstate cst; + unsigned char *inbuf; + int ret = -1; + + set_error_fn(error_fn); + if (!flush) + in_len -= 4; /* Uncompressed size hack active in pre-boot + environment */ + if (buf) + inbuf = buf; + else + inbuf = malloc(LZMA_IOBUF_SIZE); + if (!inbuf) { + error("Could not allocate input bufer"); + goto exit_0; + } + + cst.state = 0; + cst.rep0 = cst.rep1 = cst.rep2 = cst.rep3 = 1; + + wr.header = &header; + wr.flush = flush; + wr.global_pos = 0; + wr.previous_byte = 0; + wr.buffer_pos = 0; + + rc_init(&rc, fill, inbuf, in_len); + + for (i = 0; i < sizeof(header); i++) { + if (rc.ptr >= rc.buffer_end) + rc_read(&rc); + ((unsigned char *)&header)[i] = *rc.ptr++; + } + + if (header.pos >= (9 * 5 * 5)) + error("bad header"); + + mi = 0; + lc = header.pos; + while (lc >= 9) { + mi++; + lc -= 9; + } + pb = 0; + lp = mi; + while (lp >= 5) { + pb++; + lp -= 5; + } + pos_state_mask = (1 << pb) - 1; + literal_pos_mask = (1 << lp) - 1; + + ENDIAN_CONVERT(header.dict_size); + ENDIAN_CONVERT(header.dst_size); + + if (header.dict_size == 0) + header.dict_size = 1; + + if (output) + wr.buffer = output; + else { + wr.bufsize = MIN(header.dst_size, header.dict_size); + wr.buffer = large_malloc(wr.bufsize); + } + if (wr.buffer == NULL) + goto exit_1; + + num_probs = LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)); + p = (uint16_t *) large_malloc(num_probs * sizeof(*p)); + if (p == 0) + goto exit_2; + num_probs = LZMA_LITERAL + (LZMA_LIT_SIZE << (lc + lp)); + for (i = 0; i < num_probs; i++) + p[i] = (1 << RC_MODEL_TOTAL_BITS) >> 1; + + rc_init_code(&rc); + + while (get_pos(&wr) < header.dst_size) { + int pos_state = get_pos(&wr) & pos_state_mask; + uint16_t *prob = p + LZMA_IS_MATCH + + (cst.state << LZMA_NUM_POS_BITS_MAX) + pos_state; + if (rc_is_bit_0(&rc, prob)) + process_bit0(&wr, &rc, &cst, p, pos_state, prob, + lc, literal_pos_mask); + else { + process_bit1(&wr, &rc, &cst, p, pos_state, prob); + if (cst.rep0 == 0) + break; + } + } + + if (posp) + *posp = rc.ptr-rc.buffer; + if (wr.flush) + wr.flush(wr.buffer, wr.buffer_pos); + ret = 0; + large_free(p); +exit_2: + if (!output) + large_free(wr.buffer); +exit_1: + if (!buf) + free(inbuf); +exit_0: + return ret; +} + +#define decompress unlzma diff --git a/lib/zlib_inflate/inflate.h b/lib/zlib_inflate/inflate.h index df8a6c92052d..3d17b3d1b21f 100644 --- a/lib/zlib_inflate/inflate.h +++ b/lib/zlib_inflate/inflate.h @@ -1,3 +1,6 @@ +#ifndef INFLATE_H +#define INFLATE_H + /* inflate.h -- internal inflate state definition * Copyright (C) 1995-2004 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h @@ -105,3 +108,4 @@ struct inflate_state { unsigned short work[288]; /* work area for code table building */ code codes[ENOUGH]; /* space for code tables */ }; +#endif diff --git a/lib/zlib_inflate/inftrees.h b/lib/zlib_inflate/inftrees.h index 5f5219b1240e..b70b4731ac7a 100644 --- a/lib/zlib_inflate/inftrees.h +++ b/lib/zlib_inflate/inftrees.h @@ -1,3 +1,6 @@ +#ifndef INFTREES_H +#define INFTREES_H + /* inftrees.h -- header to use inftrees.c * Copyright (C) 1995-2005 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h @@ -53,3 +56,4 @@ typedef enum { extern int zlib_inflate_table (codetype type, unsigned short *lens, unsigned codes, code **table, unsigned *bits, unsigned short *work); +#endif -- cgit v1.2.2 From 30d65dbfe3add7f010a075991dc0bfeaebb7d9e1 Mon Sep 17 00:00:00 2001 From: Alain Knaff Date: Sun, 4 Jan 2009 22:46:17 +0100 Subject: bzip2/lzma: config and initramfs support for bzip2/lzma decompression Impact: New code for initramfs decompression, new features This is the second part of the bzip2/lzma patch The bzip patch is based on an idea by Christian Ludwig, includes support for compressing the kernel with bzip2 or lzma rather than gzip. Both compressors give smaller sizes than gzip. Lzma's decompresses faster than bzip2. It also supports ramdisks and initramfs' compressed using these two compressors. The functionality has been successfully used for a couple of years by the udpcast project This version applies to "tip" kernel 2.6.28 This part contains: - support for new compressions (bzip2 and lzma) in initramfs and old-style ramdisk - config dialog for kernel compression (but new kernel compressions not yet supported) Signed-off-by: Alain Knaff Signed-off-by: H. Peter Anvin --- lib/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'lib') diff --git a/lib/Makefile b/lib/Makefile index 32b0e64ded27..e2a21d5a264f 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -11,7 +11,8 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \ rbtree.o radix-tree.o dump_stack.o \ idr.o int_sqrt.o extable.o prio_tree.o \ sha1.o irq_regs.o reciprocal_div.o argv_split.o \ - proportions.o prio_heap.o ratelimit.o show_mem.o is_single_threaded.o + proportions.o prio_heap.o ratelimit.o show_mem.o is_single_threaded.o \ + decompress_inflate.o decompress_bunzip2.o decompress_unlzma.o lib-$(CONFIG_MMU) += ioremap.o lib-$(CONFIG_SMP) += cpumask.o -- cgit v1.2.2 From c8531ab343dec88ed8005e403b1b304c710b7494 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 5 Jan 2009 13:48:31 -0800 Subject: bzip2/lzma: proper Kconfig dependencies for the ramdisk options Impact: Partial resolution of build failure Make all the compression algorithms properly configurable, and make sure the ramdisk options pull in the proper compression algorithms, as they should. Signed-off-by: H. Peter Anvin --- lib/Kconfig | 13 +++++++++++++ lib/Makefile | 7 +++++-- 2 files changed, 18 insertions(+), 2 deletions(-) (limited to 'lib') diff --git a/lib/Kconfig b/lib/Kconfig index 03c2c24b9083..e37f061fd32a 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -97,6 +97,19 @@ config LZO_COMPRESS config LZO_DECOMPRESS tristate +# +# These all provide a common interface (hence the apparent duplication with +# ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.) +# +config DECOMPRESS_GZIP + tristate + +config DECOMPRESS_BZIP2 + tristate + +config DECOMPRESS_LZMA + tristate + # # Generic allocator support is selected if needed # diff --git a/lib/Makefile b/lib/Makefile index e2a21d5a264f..d9ac5a414fa7 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -11,8 +11,7 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \ rbtree.o radix-tree.o dump_stack.o \ idr.o int_sqrt.o extable.o prio_tree.o \ sha1.o irq_regs.o reciprocal_div.o argv_split.o \ - proportions.o prio_heap.o ratelimit.o show_mem.o is_single_threaded.o \ - decompress_inflate.o decompress_bunzip2.o decompress_unlzma.o + proportions.o prio_heap.o ratelimit.o show_mem.o is_single_threaded.o lib-$(CONFIG_MMU) += ioremap.o lib-$(CONFIG_SMP) += cpumask.o @@ -66,6 +65,10 @@ obj-$(CONFIG_REED_SOLOMON) += reed_solomon/ obj-$(CONFIG_LZO_COMPRESS) += lzo/ obj-$(CONFIG_LZO_DECOMPRESS) += lzo/ +obj-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o +obj-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o +obj-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o + obj-$(CONFIG_TEXTSEARCH) += textsearch.o obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o obj-$(CONFIG_TEXTSEARCH_BM) += ts_bm.o -- cgit v1.2.2 From 7856a16ea03ed9b17860d756ee6473c2e57882b2 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Wed, 7 Jan 2009 00:01:43 -0800 Subject: bzip2/lzma: DECOMPRESS_GZIP should select ZLIB_INFLATE Impact: Partial resolution of build failure DECOMPRESS_GZIP is just a common-interface wrapper around the zlib_inflate code; it thus need to select it. Signed-off-by: H. Peter Anvin --- lib/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'lib') diff --git a/lib/Kconfig b/lib/Kconfig index e37f061fd32a..daa481824d9c 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -102,6 +102,7 @@ config LZO_DECOMPRESS # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.) # config DECOMPRESS_GZIP + select ZLIB_INFLATE tristate config DECOMPRESS_BZIP2 -- cgit v1.2.2 From 5619448fc55650cb76cbb825e16e4bb5d1390399 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Thu, 8 Jan 2009 15:09:12 -0800 Subject: bzip2/lzma: fix constant in decompress_inflate Impact: Cleanup Fix constant 0x8100 /* 32K */; according to Alain the value 0x8100 was left over test code to test misalignment, the correct value is indeed 0x8000 == 32K. Signed-off-by: H. Peter Anvin --- lib/decompress_inflate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'lib') diff --git a/lib/decompress_inflate.c b/lib/decompress_inflate.c index 163e66aea5f6..d2e7c758d1ca 100644 --- a/lib/decompress_inflate.c +++ b/lib/decompress_inflate.c @@ -41,7 +41,7 @@ STATIC int INIT gunzip(unsigned char *buf, int len, set_error_fn(error_fn); rc = -1; if (flush) { - out_len = 0x8100; /* 32 K */ + out_len = 0x8000; /* 32 K */ out_buf = malloc(out_len); } else { out_len = 0x7fffffff; /* no limit */ -- cgit v1.2.2 From 6c11b12ac6f101732d43b5682f5b3ae4dda4205f Mon Sep 17 00:00:00 2001 From: Alain Knaff Date: Thu, 8 Jan 2009 15:10:19 -0800 Subject: bzip2/lzma: fix decompress_inflate.c vs multi-block-with-embedded-filename Impact: Bug fix Fix gunzip uncompression, so that it also works with files with embedded filenames that are larger than one block. Signed-off-by: Alain Knaff Signed-off-by: H. Peter Anvin --- lib/decompress_inflate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'lib') diff --git a/lib/decompress_inflate.c b/lib/decompress_inflate.c index d2e7c758d1ca..839a329b4fc4 100644 --- a/lib/decompress_inflate.c +++ b/lib/decompress_inflate.c @@ -97,7 +97,7 @@ STATIC int INIT gunzip(unsigned char *buf, int len, strm->next_in++; strm->next_in++; } - strm->avail_in = len - 10; + strm->avail_in = len - (strm->next_in - zbuf); strm->next_out = out_buf; strm->avail_out = out_len; -- cgit v1.2.2 From 889c92d21db40be0b7d22a59395060237895bb85 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Thu, 8 Jan 2009 15:14:17 -0800 Subject: bzip2/lzma: centralize format detection Centralize the compression format detection to a common routine in the lib directory, and use it for both initramfs and initrd. Signed-off-by: H. Peter Anvin --- lib/Makefile | 9 +++++---- lib/decompress.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 55 insertions(+), 4 deletions(-) create mode 100644 lib/decompress.c (limited to 'lib') diff --git a/lib/Makefile b/lib/Makefile index d9ac5a414fa7..790de7c25d0d 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -11,7 +11,8 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \ rbtree.o radix-tree.o dump_stack.o \ idr.o int_sqrt.o extable.o prio_tree.o \ sha1.o irq_regs.o reciprocal_div.o argv_split.o \ - proportions.o prio_heap.o ratelimit.o show_mem.o is_single_threaded.o + proportions.o prio_heap.o ratelimit.o show_mem.o \ + is_single_threaded.o decompress.o lib-$(CONFIG_MMU) += ioremap.o lib-$(CONFIG_SMP) += cpumask.o @@ -65,9 +66,9 @@ obj-$(CONFIG_REED_SOLOMON) += reed_solomon/ obj-$(CONFIG_LZO_COMPRESS) += lzo/ obj-$(CONFIG_LZO_DECOMPRESS) += lzo/ -obj-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o -obj-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o -obj-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o +lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o +lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o +lib-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o obj-$(CONFIG_TEXTSEARCH) += textsearch.o obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o diff --git a/lib/decompress.c b/lib/decompress.c new file mode 100644 index 000000000000..edac55cc7823 --- /dev/null +++ b/lib/decompress.c @@ -0,0 +1,50 @@ +/* + * decompress.c + * + * Detect the decompression method based on magic number + */ + +#include + +#include +#include +#include + +#include +#include + +static const struct compress_format { + unsigned char magic[2]; + const char *name; + decompress_fn decompressor; +} compressed_formats[] = { +#ifdef CONFIG_DECOMPRESS_GZIP + { {037, 0213}, "gzip", gunzip }, + { {037, 0236}, "gzip", gunzip }, +#endif +#ifdef CONFIG_DECOMPRESS_BZIP2 + { {0x42, 0x5a}, "bzip2", bunzip2 }, +#endif +#ifdef CONFIG_DECOMPRESS_LZMA + { {0x5d, 0x00}, "lzma", unlzma }, +#endif + { {0, 0}, NULL, NULL } +}; + +decompress_fn decompress_method(const unsigned char *inbuf, int len, + const char **name) +{ + const struct compress_format *cf; + + if (len < 2) + return NULL; /* Need at least this much... */ + + for (cf = compressed_formats; cf->decompressor; cf++) { + if (!memcmp(inbuf, cf->magic, 2)) + break; + + } + if (name) + *name = cf->name; + return cf->decompressor; +} -- cgit v1.2.2 From 23a22d57a8962479ca630c9542e62d6f86fdf927 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 12 Jan 2009 14:24:04 -0800 Subject: bzip2/lzma: comprehensible error messages for missing decompressor Instead of failing to identify a compressed image with a decompressor that we don't have compiled in, identify it and fail with a comprehensible panic message. Signed-off-by: H. Peter Anvin --- lib/decompress.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'lib') diff --git a/lib/decompress.c b/lib/decompress.c index edac55cc7823..961f367320fc 100644 --- a/lib/decompress.c +++ b/lib/decompress.c @@ -13,21 +13,25 @@ #include #include +#ifndef CONFIG_DECOMPRESS_GZIP +# define gunzip NULL +#endif +#ifndef CONFIG_DECOMPRESS_BZIP2 +# define bunzip2 NULL +#endif +#ifndef CONFIG_DECOMPRESS_LZMA +# define unlzma NULL +#endif + static const struct compress_format { unsigned char magic[2]; const char *name; decompress_fn decompressor; } compressed_formats[] = { -#ifdef CONFIG_DECOMPRESS_GZIP { {037, 0213}, "gzip", gunzip }, { {037, 0236}, "gzip", gunzip }, -#endif -#ifdef CONFIG_DECOMPRESS_BZIP2 { {0x42, 0x5a}, "bzip2", bunzip2 }, -#endif -#ifdef CONFIG_DECOMPRESS_LZMA { {0x5d, 0x00}, "lzma", unlzma }, -#endif { {0, 0}, NULL, NULL } }; -- cgit v1.2.2 From e4aa7ca5a2e6d44f07ceb87d9448113f5b48a334 Mon Sep 17 00:00:00 2001 From: Alain Knaff Date: Thu, 19 Feb 2009 13:36:55 -0800 Subject: bzip2/lzma: don't stop search at first unconfigured compression Impact: Bugfix, avoids kernels which build but panic on boot Fix a bug in decompress.c : only scanned until the first non-configured compressor (with disastrous result especially if that was gzip.) Signed-off-by: Alain Knaff Signed-off-by: H. Peter Anvin --- lib/decompress.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'lib') diff --git a/lib/decompress.c b/lib/decompress.c index 961f367320fc..d2842f571674 100644 --- a/lib/decompress.c +++ b/lib/decompress.c @@ -43,7 +43,7 @@ decompress_fn decompress_method(const unsigned char *inbuf, int len, if (len < 2) return NULL; /* Need at least this much... */ - for (cf = compressed_formats; cf->decompressor; cf++) { + for (cf = compressed_formats; cf->name; cf++) { if (!memcmp(inbuf, cf->magic, 2)) break; -- cgit v1.2.2