From a0279bd58060ccedbd414edf97d50cfa3778c370 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Fri, 2 Apr 2010 11:33:29 -0500 Subject: kgdb: have ebin2mem call probe_kernel_write once Rather than call probe_kernel_write() one byte at a time, process the whole buffer locally and pass the entire result in one go. This way, architectures that need to do special handling based on the length can do so, or we only end up calling memcpy() once. [sonic.zhang@analog.com: Reported original problem and preliminary patch] Signed-off-by: Jason Wessel Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger --- kernel/kgdb.c | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-) (limited to 'kernel') diff --git a/kernel/kgdb.c b/kernel/kgdb.c index 761fdd2b3034..42fd128127a6 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -391,27 +391,22 @@ int kgdb_mem2hex(char *mem, char *buf, int count) /* * Copy the binary array pointed to by buf into mem. Fix $, #, and - * 0x7d escaped with 0x7d. Return a pointer to the character after - * the last byte written. + * 0x7d escaped with 0x7d. Return -EFAULT on failure or 0 on success. + * The input buf is overwitten with the result to write to mem. */ static int kgdb_ebin2mem(char *buf, char *mem, int count) { - int err = 0; - char c; + int size = 0; + char *c = buf; while (count-- > 0) { - c = *buf++; - if (c == 0x7d) - c = *buf++ ^ 0x20; - - err = probe_kernel_write(mem, &c, 1); - if (err) - break; - - mem++; + c[size] = *buf++; + if (c[size] == 0x7d) + c[size] = *buf++ ^ 0x20; + size++; } - return err; + return probe_kernel_write(mem, c, size); } /* -- cgit v1.2.2 From 62fae312197a8fbcd3727261d59f5a6bd0dbf158 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Fri, 2 Apr 2010 11:47:02 -0500 Subject: kgdb: eliminate kgdb_wait(), all cpus enter the same way This is a kgdb architectural change to have all the cpus (master or slave) enter the same function. A cpu that hits an exception (wants to be the master cpu) will call kgdb_handle_exception() from the trap handler and then invoke a kgdb_roundup_cpu() to synchronize the other cpus and bring them into the kgdb_handle_exception() as well. A slave cpu will enter kgdb_handle_exception() from the kgdb_nmicallback() and set the exception state to note that the processor is a slave. Previously the salve cpu would have called kgdb_wait(). This change allows the debug core to change cpus without resuming the system in order to inspect arch specific cpu information. Signed-off-by: Jason Wessel --- kernel/kgdb.c | 165 +++++++++++++++++++++++++++++----------------------------- 1 file changed, 82 insertions(+), 83 deletions(-) (limited to 'kernel') diff --git a/kernel/kgdb.c b/kernel/kgdb.c index 42fd128127a6..6882c047452d 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -69,9 +69,16 @@ struct kgdb_state { struct pt_regs *linux_regs; }; +/* Exception state values */ +#define DCPU_WANT_MASTER 0x1 /* Waiting to become a master kgdb cpu */ +#define DCPU_NEXT_MASTER 0x2 /* Transition from one master cpu to another */ +#define DCPU_IS_SLAVE 0x4 /* Slave cpu enter exception */ +#define DCPU_SSTEP 0x8 /* CPU is single stepping */ + static struct debuggerinfo_struct { void *debuggerinfo; struct task_struct *task; + int exception_state; } kgdb_info[NR_CPUS]; /** @@ -557,49 +564,6 @@ static struct task_struct *getthread(struct pt_regs *regs, int tid) return find_task_by_pid_ns(tid, &init_pid_ns); } -/* - * CPU debug state control: - */ - -#ifdef CONFIG_SMP -static void kgdb_wait(struct pt_regs *regs) -{ - unsigned long flags; - int cpu; - - local_irq_save(flags); - cpu = raw_smp_processor_id(); - kgdb_info[cpu].debuggerinfo = regs; - kgdb_info[cpu].task = current; - /* - * Make sure the above info reaches the primary CPU before - * our cpu_in_kgdb[] flag setting does: - */ - smp_wmb(); - atomic_set(&cpu_in_kgdb[cpu], 1); - - /* Disable any cpu specific hw breakpoints */ - kgdb_disable_hw_debug(regs); - - /* Wait till primary CPU is done with debugging */ - while (atomic_read(&passive_cpu_wait[cpu])) - cpu_relax(); - - kgdb_info[cpu].debuggerinfo = NULL; - kgdb_info[cpu].task = NULL; - - /* fix up hardware debug registers on local cpu */ - if (arch_kgdb_ops.correct_hw_break) - arch_kgdb_ops.correct_hw_break(); - - /* Signal the primary CPU that we are done: */ - atomic_set(&cpu_in_kgdb[cpu], 0); - touch_softlockup_watchdog_sync(); - clocksource_touch_watchdog(); - local_irq_restore(flags); -} -#endif - /* * Some architectures need cache flushes when we set/clear a * breakpoint: @@ -1395,34 +1359,12 @@ static int kgdb_reenter_check(struct kgdb_state *ks) return 1; } -/* - * kgdb_handle_exception() - main entry point from a kernel exception - * - * Locking hierarchy: - * interface locks, if any (begin_session) - * kgdb lock (kgdb_active) - */ -int -kgdb_handle_exception(int evector, int signo, int ecode, struct pt_regs *regs) +static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs) { - struct kgdb_state kgdb_var; - struct kgdb_state *ks = &kgdb_var; unsigned long flags; int sstep_tries = 100; int error = 0; int i, cpu; - - ks->cpu = raw_smp_processor_id(); - ks->ex_vector = evector; - ks->signo = signo; - ks->ex_vector = evector; - ks->err_code = ecode; - ks->kgdb_usethreadid = 0; - ks->linux_regs = regs; - - if (kgdb_reenter_check(ks)) - return 0; /* Ouch, double exception ! */ - acquirelock: /* * Interrupts will be restored by the 'trap return' code, except when @@ -1430,13 +1372,42 @@ acquirelock: */ local_irq_save(flags); - cpu = raw_smp_processor_id(); + cpu = ks->cpu; + kgdb_info[cpu].debuggerinfo = regs; + kgdb_info[cpu].task = current; + /* + * Make sure the above info reaches the primary CPU before + * our cpu_in_kgdb[] flag setting does: + */ + smp_wmb(); + atomic_set(&cpu_in_kgdb[cpu], 1); /* - * Acquire the kgdb_active lock: + * CPU will loop if it is a slave or request to become a kgdb + * master cpu and acquire the kgdb_active lock: */ - while (atomic_cmpxchg(&kgdb_active, -1, cpu) != -1) + while (1) { + if (kgdb_info[cpu].exception_state & DCPU_WANT_MASTER) { + if (atomic_cmpxchg(&kgdb_active, -1, cpu) == cpu) + break; + } else if (kgdb_info[cpu].exception_state & DCPU_IS_SLAVE) { + if (!atomic_read(&passive_cpu_wait[cpu])) + goto return_normal; + } else { +return_normal: + /* Return to normal operation by executing any + * hw breakpoint fixup. + */ + if (arch_kgdb_ops.correct_hw_break) + arch_kgdb_ops.correct_hw_break(); + atomic_set(&cpu_in_kgdb[cpu], 0); + touch_softlockup_watchdog_sync(); + clocksource_touch_watchdog(); + local_irq_restore(flags); + return 0; + } cpu_relax(); + } /* * For single stepping, try to only enter on the processor @@ -1470,9 +1441,6 @@ acquirelock: if (kgdb_io_ops->pre_exception) kgdb_io_ops->pre_exception(); - kgdb_info[ks->cpu].debuggerinfo = ks->linux_regs; - kgdb_info[ks->cpu].task = current; - kgdb_disable_hw_debug(ks->linux_regs); /* @@ -1484,12 +1452,6 @@ acquirelock: atomic_set(&passive_cpu_wait[i], 1); } - /* - * spin_lock code is good enough as a barrier so we don't - * need one here: - */ - atomic_set(&cpu_in_kgdb[ks->cpu], 1); - #ifdef CONFIG_SMP /* Signal the other CPUs to enter kgdb_wait() */ if ((!kgdb_single_step) && kgdb_do_roundup) @@ -1521,8 +1483,6 @@ acquirelock: if (kgdb_io_ops->post_exception) kgdb_io_ops->post_exception(); - kgdb_info[ks->cpu].debuggerinfo = NULL; - kgdb_info[ks->cpu].task = NULL; atomic_set(&cpu_in_kgdb[ks->cpu], 0); if (!kgdb_single_step) { @@ -1555,13 +1515,52 @@ kgdb_restore: return error; } +/* + * kgdb_handle_exception() - main entry point from a kernel exception + * + * Locking hierarchy: + * interface locks, if any (begin_session) + * kgdb lock (kgdb_active) + */ +int +kgdb_handle_exception(int evector, int signo, int ecode, struct pt_regs *regs) +{ + struct kgdb_state kgdb_var; + struct kgdb_state *ks = &kgdb_var; + int ret; + + ks->cpu = raw_smp_processor_id(); + ks->ex_vector = evector; + ks->signo = signo; + ks->ex_vector = evector; + ks->err_code = ecode; + ks->kgdb_usethreadid = 0; + ks->linux_regs = regs; + + if (kgdb_reenter_check(ks)) + return 0; /* Ouch, double exception ! */ + kgdb_info[ks->cpu].exception_state |= DCPU_WANT_MASTER; + ret = kgdb_cpu_enter(ks, regs); + kgdb_info[ks->cpu].exception_state &= ~DCPU_WANT_MASTER; + return ret; +} + int kgdb_nmicallback(int cpu, void *regs) { #ifdef CONFIG_SMP + struct kgdb_state kgdb_var; + struct kgdb_state *ks = &kgdb_var; + + memset(ks, 0, sizeof(struct kgdb_state)); + ks->cpu = cpu; + ks->linux_regs = regs; + if (!atomic_read(&cpu_in_kgdb[cpu]) && - atomic_read(&kgdb_active) != cpu && - atomic_read(&cpu_in_kgdb[atomic_read(&kgdb_active)])) { - kgdb_wait((struct pt_regs *)regs); + atomic_read(&kgdb_active) != -1 && + atomic_read(&kgdb_active) != cpu) { + kgdb_info[cpu].exception_state |= DCPU_IS_SLAVE; + kgdb_cpu_enter(ks, regs); + kgdb_info[cpu].exception_state &= ~DCPU_IS_SLAVE; return 0; } #endif -- cgit v1.2.2 From ae6bf53e0255c8ab04b6fe31806e318432570e3c Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Fri, 2 Apr 2010 14:58:18 -0500 Subject: kgdb: use atomic_inc and atomic_dec instead of atomic_set Memory barriers should be used for the kgdb cpu synchronization. The atomic_set() does not imply a memory barrier. Reported-by: Will Deacon Signed-off-by: Jason Wessel --- kernel/kgdb.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'kernel') diff --git a/kernel/kgdb.c b/kernel/kgdb.c index 6882c047452d..2f7f454605c2 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -1379,8 +1379,7 @@ acquirelock: * Make sure the above info reaches the primary CPU before * our cpu_in_kgdb[] flag setting does: */ - smp_wmb(); - atomic_set(&cpu_in_kgdb[cpu], 1); + atomic_inc(&cpu_in_kgdb[cpu]); /* * CPU will loop if it is a slave or request to become a kgdb @@ -1400,7 +1399,7 @@ return_normal: */ if (arch_kgdb_ops.correct_hw_break) arch_kgdb_ops.correct_hw_break(); - atomic_set(&cpu_in_kgdb[cpu], 0); + atomic_dec(&cpu_in_kgdb[cpu]); touch_softlockup_watchdog_sync(); clocksource_touch_watchdog(); local_irq_restore(flags); @@ -1449,7 +1448,7 @@ return_normal: */ if (!kgdb_single_step) { for (i = 0; i < NR_CPUS; i++) - atomic_set(&passive_cpu_wait[i], 1); + atomic_inc(&passive_cpu_wait[i]); } #ifdef CONFIG_SMP @@ -1483,11 +1482,11 @@ return_normal: if (kgdb_io_ops->post_exception) kgdb_io_ops->post_exception(); - atomic_set(&cpu_in_kgdb[ks->cpu], 0); + atomic_dec(&cpu_in_kgdb[ks->cpu]); if (!kgdb_single_step) { for (i = NR_CPUS-1; i >= 0; i--) - atomic_set(&passive_cpu_wait[i], 0); + atomic_dec(&passive_cpu_wait[i]); /* * Wait till all the CPUs have quit * from the debugger. @@ -1736,11 +1735,11 @@ EXPORT_SYMBOL_GPL(kgdb_unregister_io_module); */ void kgdb_breakpoint(void) { - atomic_set(&kgdb_setting_breakpoint, 1); + atomic_inc(&kgdb_setting_breakpoint); wmb(); /* Sync point before breakpoint */ arch_kgdb_breakpoint(); wmb(); /* Sync point after breakpoint */ - atomic_set(&kgdb_setting_breakpoint, 0); + atomic_dec(&kgdb_setting_breakpoint); } EXPORT_SYMBOL_GPL(kgdb_breakpoint); -- cgit v1.2.2 From 4da75b9ceac6939cd76830ec9581bef5bb398ad3 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Fri, 2 Apr 2010 11:57:18 -0500 Subject: kgdb: Turn off tracing while in the debugger The kernel debugger should turn off kernel tracing any time the debugger is active and restore it on resume. Signed-off-by: Jason Wessel Reviewed-by: Steven Rostedt --- kernel/kgdb.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'kernel') diff --git a/kernel/kgdb.c b/kernel/kgdb.c index 2f7f454605c2..11f3515ca83f 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -1365,6 +1365,7 @@ static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs) int sstep_tries = 100; int error = 0; int i, cpu; + int trace_on = 0; acquirelock: /* * Interrupts will be restored by the 'trap return' code, except when @@ -1399,6 +1400,8 @@ return_normal: */ if (arch_kgdb_ops.correct_hw_break) arch_kgdb_ops.correct_hw_break(); + if (trace_on) + tracing_on(); atomic_dec(&cpu_in_kgdb[cpu]); touch_softlockup_watchdog_sync(); clocksource_touch_watchdog(); @@ -1474,6 +1477,9 @@ return_normal: kgdb_single_step = 0; kgdb_contthread = current; exception_level = 0; + trace_on = tracing_is_on(); + if (trace_on) + tracing_off(); /* Talk to debugger with gdbserial protocol */ error = gdb_serial_stub(ks); @@ -1505,6 +1511,8 @@ kgdb_restore: else kgdb_sstep_pid = 0; } + if (trace_on) + tracing_on(); /* Free kgdb_active */ atomic_set(&kgdb_active, -1); touch_softlockup_watchdog_sync(); -- cgit v1.2.2