From 968ab1838a5d48f02f5b471aa1d0e59e2cc2ccbc Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 15 Nov 2010 13:37:37 -0800 Subject: include/linux/kernel.h: Move logging bits to include/linux/printk.h Move the logging bits from kernel.h into printk.h so that there is a bit more logical separation of the generic from the printk logging specific parts. Signed-off-by: Joe Perches Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 245 +----------------------------------------------- include/linux/printk.h | 248 +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 249 insertions(+), 244 deletions(-) create mode 100644 include/linux/printk.h (limited to 'include') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index fc3da9e4da19..b6de9a6f7018 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -17,13 +17,11 @@ #include #include #include +#include #include #include #include -extern const char linux_banner[]; -extern const char linux_proc_banner[]; - #define USHRT_MAX ((u16)(~0U)) #define SHRT_MAX ((s16)(USHRT_MAX>>1)) #define SHRT_MIN ((s16)(-SHRT_MAX - 1)) @@ -110,31 +108,6 @@ extern const char linux_proc_banner[]; */ #define lower_32_bits(n) ((u32)(n)) -#define KERN_EMERG "<0>" /* system is unusable */ -#define KERN_ALERT "<1>" /* action must be taken immediately */ -#define KERN_CRIT "<2>" /* critical conditions */ -#define KERN_ERR "<3>" /* error conditions */ -#define KERN_WARNING "<4>" /* warning conditions */ -#define KERN_NOTICE "<5>" /* normal but significant condition */ -#define KERN_INFO "<6>" /* informational */ -#define KERN_DEBUG "<7>" /* debug-level messages */ - -/* Use the default kernel loglevel */ -#define KERN_DEFAULT "" -/* - * Annotation for a "continued" line of log printout (only done after a - * line that had no enclosing \n). Only to be used by core/arch code - * during early bootup (a continued line is not SMP-safe otherwise). - */ -#define KERN_CONT "" - -extern int console_printk[]; - -#define console_loglevel (console_printk[0]) -#define default_message_loglevel (console_printk[1]) -#define minimum_console_loglevel (console_printk[2]) -#define default_console_loglevel (console_printk[3]) - struct completion; struct pt_regs; struct user; @@ -187,11 +160,6 @@ static inline void might_fault(void) } #endif -struct va_format { - const char *fmt; - va_list *va; -}; - extern struct atomic_notifier_head panic_notifier_list; extern long (*panic_blink)(int state); NORET_TYPE void panic(const char * fmt, ...) @@ -245,115 +213,8 @@ extern int func_ptr_is_kernel_text(void *ptr); struct pid; extern struct pid *session_of_pgrp(struct pid *pgrp); -/* - * FW_BUG - * Add this to a message where you are sure the firmware is buggy or behaves - * really stupid or out of spec. Be aware that the responsible BIOS developer - * should be able to fix this issue or at least get a concrete idea of the - * problem by reading your message without the need of looking at the kernel - * code. - * - * Use it for definite and high priority BIOS bugs. - * - * FW_WARN - * Use it for not that clear (e.g. could the kernel messed up things already?) - * and medium priority BIOS bugs. - * - * FW_INFO - * Use this one if you want to tell the user or vendor about something - * suspicious, but generally harmless related to the firmware. - * - * Use it for information or very low priority BIOS bugs. - */ -#define FW_BUG "[Firmware Bug]: " -#define FW_WARN "[Firmware Warn]: " -#define FW_INFO "[Firmware Info]: " - -/* - * HW_ERR - * Add this to a message for hardware errors, so that user can report - * it to hardware vendor instead of LKML or software vendor. - */ -#define HW_ERR "[Hardware Error]: " - -#ifdef CONFIG_PRINTK -asmlinkage int vprintk(const char *fmt, va_list args) - __attribute__ ((format (printf, 1, 0))); -asmlinkage int printk(const char * fmt, ...) - __attribute__ ((format (printf, 1, 2))) __cold; - -/* - * Please don't use printk_ratelimit(), because it shares ratelimiting state - * with all other unrelated printk_ratelimit() callsites. Instead use - * printk_ratelimited() or plain old __ratelimit(). - */ -extern int __printk_ratelimit(const char *func); -#define printk_ratelimit() __printk_ratelimit(__func__) -extern bool printk_timed_ratelimit(unsigned long *caller_jiffies, - unsigned int interval_msec); - -extern int printk_delay_msec; -extern int dmesg_restrict; - -/* - * Print a one-time message (analogous to WARN_ONCE() et al): - */ -#define printk_once(x...) ({ \ - static bool __print_once; \ - \ - if (!__print_once) { \ - __print_once = true; \ - printk(x); \ - } \ -}) - -void log_buf_kexec_setup(void); -#else -static inline int vprintk(const char *s, va_list args) - __attribute__ ((format (printf, 1, 0))); -static inline int vprintk(const char *s, va_list args) { return 0; } -static inline int printk(const char *s, ...) - __attribute__ ((format (printf, 1, 2))); -static inline int __cold printk(const char *s, ...) { return 0; } -static inline int printk_ratelimit(void) { return 0; } -static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \ - unsigned int interval_msec) \ - { return false; } - -/* No effect, but we still get type checking even in the !PRINTK case: */ -#define printk_once(x...) printk(x) - -static inline void log_buf_kexec_setup(void) -{ -} -#endif - -/* - * Dummy printk for disabled debugging statements to use whilst maintaining - * gcc's format and side-effect checking. - */ -static inline __attribute__ ((format (printf, 1, 2))) -int no_printk(const char *s, ...) { return 0; } - -extern int printk_needs_cpu(int cpu); -extern void printk_tick(void); - -extern void asmlinkage __attribute__((format(printf, 1, 2))) - early_printk(const char *fmt, ...); - unsigned long int_sqrt(unsigned long); -static inline void console_silent(void) -{ - console_loglevel = 0; -} - -static inline void console_verbose(void) -{ - if (console_loglevel) - console_loglevel = 15; -} - extern void bust_spinlocks(int yes); extern void wake_up_klogd(void); extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */ @@ -390,22 +251,6 @@ extern enum system_states { #define TAINT_CRAP 10 #define TAINT_FIRMWARE_WORKAROUND 11 -extern void dump_stack(void) __cold; - -enum { - DUMP_PREFIX_NONE, - DUMP_PREFIX_ADDRESS, - DUMP_PREFIX_OFFSET -}; -extern void hex_dump_to_buffer(const void *buf, size_t len, - int rowsize, int groupsize, - char *linebuf, size_t linebuflen, bool ascii); -extern void print_hex_dump(const char *level, const char *prefix_str, - int prefix_type, int rowsize, int groupsize, - const void *buf, size_t len, bool ascii); -extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type, - const void *buf, size_t len); - extern const char hex_asc[]; #define hex_asc_lo(x) hex_asc[((x) & 0x0f)] #define hex_asc_hi(x) hex_asc[((x) & 0xf0) >> 4] @@ -419,94 +264,6 @@ static inline char *pack_hex_byte(char *buf, u8 byte) extern int hex_to_bin(char ch); -#ifndef pr_fmt -#define pr_fmt(fmt) fmt -#endif - -#define pr_emerg(fmt, ...) \ - printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__) -#define pr_alert(fmt, ...) \ - printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__) -#define pr_crit(fmt, ...) \ - printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) -#define pr_err(fmt, ...) \ - printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) -#define pr_warning(fmt, ...) \ - printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) -#define pr_warn pr_warning -#define pr_notice(fmt, ...) \ - printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) -#define pr_info(fmt, ...) \ - printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) -#define pr_cont(fmt, ...) \ - printk(KERN_CONT fmt, ##__VA_ARGS__) - -/* pr_devel() should produce zero code unless DEBUG is defined */ -#ifdef DEBUG -#define pr_devel(fmt, ...) \ - printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) -#else -#define pr_devel(fmt, ...) \ - ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; }) -#endif - -/* If you are writing a driver, please use dev_dbg instead */ -#if defined(DEBUG) -#define pr_debug(fmt, ...) \ - printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) -#elif defined(CONFIG_DYNAMIC_DEBUG) -/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */ -#define pr_debug(fmt, ...) \ - dynamic_pr_debug(fmt, ##__VA_ARGS__) -#else -#define pr_debug(fmt, ...) \ - ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; }) -#endif - -/* - * ratelimited messages with local ratelimit_state, - * no local ratelimit_state used in the !PRINTK case - */ -#ifdef CONFIG_PRINTK -#define printk_ratelimited(fmt, ...) ({ \ - static DEFINE_RATELIMIT_STATE(_rs, \ - DEFAULT_RATELIMIT_INTERVAL, \ - DEFAULT_RATELIMIT_BURST); \ - \ - if (__ratelimit(&_rs)) \ - printk(fmt, ##__VA_ARGS__); \ -}) -#else -/* No effect, but we still get type checking even in the !PRINTK case: */ -#define printk_ratelimited printk -#endif - -#define pr_emerg_ratelimited(fmt, ...) \ - printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__) -#define pr_alert_ratelimited(fmt, ...) \ - printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__) -#define pr_crit_ratelimited(fmt, ...) \ - printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) -#define pr_err_ratelimited(fmt, ...) \ - printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) -#define pr_warning_ratelimited(fmt, ...) \ - printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) -#define pr_warn_ratelimited pr_warning_ratelimited -#define pr_notice_ratelimited(fmt, ...) \ - printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) -#define pr_info_ratelimited(fmt, ...) \ - printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) -/* no pr_cont_ratelimited, don't do that... */ -/* If you are writing a driver, please use dev_dbg instead */ -#if defined(DEBUG) -#define pr_debug_ratelimited(fmt, ...) \ - printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) -#else -#define pr_debug_ratelimited(fmt, ...) \ - ({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \ - ##__VA_ARGS__); 0; }) -#endif - /* * General tracing related utility functions - trace_printk(), * tracing_on/tracing_off and tracing_start()/tracing_stop diff --git a/include/linux/printk.h b/include/linux/printk.h new file mode 100644 index 000000000000..b772ca5fbdf0 --- /dev/null +++ b/include/linux/printk.h @@ -0,0 +1,248 @@ +#ifndef __KERNEL_PRINTK__ +#define __KERNEL_PRINTK__ + +extern const char linux_banner[]; +extern const char linux_proc_banner[]; + +#define KERN_EMERG "<0>" /* system is unusable */ +#define KERN_ALERT "<1>" /* action must be taken immediately */ +#define KERN_CRIT "<2>" /* critical conditions */ +#define KERN_ERR "<3>" /* error conditions */ +#define KERN_WARNING "<4>" /* warning conditions */ +#define KERN_NOTICE "<5>" /* normal but significant condition */ +#define KERN_INFO "<6>" /* informational */ +#define KERN_DEBUG "<7>" /* debug-level messages */ + +/* Use the default kernel loglevel */ +#define KERN_DEFAULT "" +/* + * Annotation for a "continued" line of log printout (only done after a + * line that had no enclosing \n). Only to be used by core/arch code + * during early bootup (a continued line is not SMP-safe otherwise). + */ +#define KERN_CONT "" + +extern int console_printk[]; + +#define console_loglevel (console_printk[0]) +#define default_message_loglevel (console_printk[1]) +#define minimum_console_loglevel (console_printk[2]) +#define default_console_loglevel (console_printk[3]) + +struct va_format { + const char *fmt; + va_list *va; +}; + +/* + * FW_BUG + * Add this to a message where you are sure the firmware is buggy or behaves + * really stupid or out of spec. Be aware that the responsible BIOS developer + * should be able to fix this issue or at least get a concrete idea of the + * problem by reading your message without the need of looking at the kernel + * code. + * + * Use it for definite and high priority BIOS bugs. + * + * FW_WARN + * Use it for not that clear (e.g. could the kernel messed up things already?) + * and medium priority BIOS bugs. + * + * FW_INFO + * Use this one if you want to tell the user or vendor about something + * suspicious, but generally harmless related to the firmware. + * + * Use it for information or very low priority BIOS bugs. + */ +#define FW_BUG "[Firmware Bug]: " +#define FW_WARN "[Firmware Warn]: " +#define FW_INFO "[Firmware Info]: " + +/* + * HW_ERR + * Add this to a message for hardware errors, so that user can report + * it to hardware vendor instead of LKML or software vendor. + */ +#define HW_ERR "[Hardware Error]: " + +#ifdef CONFIG_PRINTK +asmlinkage int vprintk(const char *fmt, va_list args) + __attribute__ ((format (printf, 1, 0))); +asmlinkage int printk(const char * fmt, ...) + __attribute__ ((format (printf, 1, 2))) __cold; + +/* + * Please don't use printk_ratelimit(), because it shares ratelimiting state + * with all other unrelated printk_ratelimit() callsites. Instead use + * printk_ratelimited() or plain old __ratelimit(). + */ +extern int __printk_ratelimit(const char *func); +#define printk_ratelimit() __printk_ratelimit(__func__) +extern bool printk_timed_ratelimit(unsigned long *caller_jiffies, + unsigned int interval_msec); + +extern int printk_delay_msec; +extern int dmesg_restrict; + +/* + * Print a one-time message (analogous to WARN_ONCE() et al): + */ +#define printk_once(x...) ({ \ + static bool __print_once; \ + \ + if (!__print_once) { \ + __print_once = true; \ + printk(x); \ + } \ +}) + +void log_buf_kexec_setup(void); +#else +static inline int vprintk(const char *s, va_list args) + __attribute__ ((format (printf, 1, 0))); +static inline int vprintk(const char *s, va_list args) { return 0; } +static inline int printk(const char *s, ...) + __attribute__ ((format (printf, 1, 2))); +static inline int __cold printk(const char *s, ...) { return 0; } +static inline int printk_ratelimit(void) { return 0; } +static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \ + unsigned int interval_msec) \ + { return false; } + +/* No effect, but we still get type checking even in the !PRINTK case: */ +#define printk_once(x...) printk(x) + +static inline void log_buf_kexec_setup(void) +{ +} +#endif + +/* + * Dummy printk for disabled debugging statements to use whilst maintaining + * gcc's format and side-effect checking. + */ +static inline __attribute__ ((format (printf, 1, 2))) +int no_printk(const char *s, ...) { return 0; } + +extern int printk_needs_cpu(int cpu); +extern void printk_tick(void); + +extern void asmlinkage __attribute__((format(printf, 1, 2))) + early_printk(const char *fmt, ...); + +static inline void console_silent(void) +{ + console_loglevel = 0; +} + +static inline void console_verbose(void) +{ + if (console_loglevel) + console_loglevel = 15; +} + +extern void dump_stack(void) __cold; + +enum { + DUMP_PREFIX_NONE, + DUMP_PREFIX_ADDRESS, + DUMP_PREFIX_OFFSET +}; +extern void hex_dump_to_buffer(const void *buf, size_t len, + int rowsize, int groupsize, + char *linebuf, size_t linebuflen, bool ascii); +extern void print_hex_dump(const char *level, const char *prefix_str, + int prefix_type, int rowsize, int groupsize, + const void *buf, size_t len, bool ascii); +extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type, + const void *buf, size_t len); + +#ifndef pr_fmt +#define pr_fmt(fmt) fmt +#endif + +#define pr_emerg(fmt, ...) \ + printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__) +#define pr_alert(fmt, ...) \ + printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__) +#define pr_crit(fmt, ...) \ + printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) +#define pr_err(fmt, ...) \ + printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) +#define pr_warning(fmt, ...) \ + printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) +#define pr_warn pr_warning +#define pr_notice(fmt, ...) \ + printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) +#define pr_info(fmt, ...) \ + printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) +#define pr_cont(fmt, ...) \ + printk(KERN_CONT fmt, ##__VA_ARGS__) + +/* pr_devel() should produce zero code unless DEBUG is defined */ +#ifdef DEBUG +#define pr_devel(fmt, ...) \ + printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) +#else +#define pr_devel(fmt, ...) \ + ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; }) +#endif + +/* If you are writing a driver, please use dev_dbg instead */ +#if defined(DEBUG) +#define pr_debug(fmt, ...) \ + printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) +#elif defined(CONFIG_DYNAMIC_DEBUG) +/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */ +#define pr_debug(fmt, ...) \ + dynamic_pr_debug(fmt, ##__VA_ARGS__) +#else +#define pr_debug(fmt, ...) \ + ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; }) +#endif + +/* + * ratelimited messages with local ratelimit_state, + * no local ratelimit_state used in the !PRINTK case + */ +#ifdef CONFIG_PRINTK +#define printk_ratelimited(fmt, ...) ({ \ + static DEFINE_RATELIMIT_STATE(_rs, \ + DEFAULT_RATELIMIT_INTERVAL, \ + DEFAULT_RATELIMIT_BURST); \ + \ + if (__ratelimit(&_rs)) \ + printk(fmt, ##__VA_ARGS__); \ +}) +#else +/* No effect, but we still get type checking even in the !PRINTK case: */ +#define printk_ratelimited printk +#endif + +#define pr_emerg_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__) +#define pr_alert_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__) +#define pr_crit_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) +#define pr_err_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) +#define pr_warning_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) +#define pr_warn_ratelimited pr_warning_ratelimited +#define pr_notice_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) +#define pr_info_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) +/* no pr_cont_ratelimited, don't do that... */ +/* If you are writing a driver, please use dev_dbg instead */ +#if defined(DEBUG) +#define pr_debug_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) +#else +#define pr_debug_ratelimited(fmt, ...) \ + ({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \ + ##__VA_ARGS__); 0; }) +#endif + +#endif -- cgit v1.2.2