From 7916c3548e53bffb0545a1d0dc7fde86d79add92 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 30 Apr 2008 23:25:55 +0400 Subject: [MIPS] Pb1000 code style cleanup Fix several errors and warnings given by checkpatch.pl: - use of C99 // comments; - brace not on the same line with condition in the 'switch' statement; - printk() without KERN_* facility level; - unnecessary braces for single-statement block; - using simple_strtol() where strict_strtol() could be used. In addition to these changes, also do the following: - properly indent the 'switch' statement; - remove needless parentheses; - insert spaces between operator and its operands; - replace numeric literals/expressions with the matching macros; - remove useless #if dirctive from board_setup(); - remove unneeded numeric literal type casts; - remove space after the type cast's closing parenthesis; - replace spaces after the macro name with tabs in the #define directives, and sometimes insert spaces there; - remove excess new lines; - fix typos/errors, capitalize acronyms, etc. in the comments; - make the multi-line comment style consistent with the kernel style elsewhere by adding empty first/last line; - combine some comments; - update MontaVista copyright; - remove Pete Popov's old email address... Signed-off-by: Sergei Shtylyov Signed-off-by: Ralf Baechle --- include/asm-mips/mach-pb1x00/pb1000.h | 189 ++++++++++------------------------ 1 file changed, 52 insertions(+), 137 deletions(-) (limited to 'include') diff --git a/include/asm-mips/mach-pb1x00/pb1000.h b/include/asm-mips/mach-pb1x00/pb1000.h index b52e0e7ee3fb..6d1ff9060e44 100644 --- a/include/asm-mips/mach-pb1x00/pb1000.h +++ b/include/asm-mips/mach-pb1x00/pb1000.h @@ -1,9 +1,8 @@ /* - * Alchemy Semi PB1000 Referrence Board + * Alchemy Semi Pb1000 Referrence Board * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. * * ######################################################################## * @@ -28,145 +27,61 @@ #define __ASM_PB1000_H /* PCMCIA PB1000 specific defines */ -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) - -#define PB1000_PCR 0xBE000000 -# define PCR_SLOT_0_VPP0 (1<<0) -# define PCR_SLOT_0_VPP1 (1<<1) -# define PCR_SLOT_0_VCC0 (1<<2) -# define PCR_SLOT_0_VCC1 (1<<3) -# define PCR_SLOT_0_RST (1<<4) - -# define PCR_SLOT_1_VPP0 (1<<8) -# define PCR_SLOT_1_VPP1 (1<<9) -# define PCR_SLOT_1_VCC0 (1<<10) -# define PCR_SLOT_1_VCC1 (1<<11) -# define PCR_SLOT_1_RST (1<<12) - -#define PB1000_MDR 0xBE000004 -# define MDR_PI (1<<5) /* pcmcia int latch */ -# define MDR_EPI (1<<14) /* enable pcmcia int */ -# define MDR_CPI (1<<15) /* clear pcmcia int */ - -#define PB1000_ACR1 0xBE000008 -# define ACR1_SLOT_0_CD1 (1<<0) /* card detect 1 */ -# define ACR1_SLOT_0_CD2 (1<<1) /* card detect 2 */ -# define ACR1_SLOT_0_READY (1<<2) /* ready */ -# define ACR1_SLOT_0_STATUS (1<<3) /* status change */ -# define ACR1_SLOT_0_VS1 (1<<4) /* voltage sense 1 */ -# define ACR1_SLOT_0_VS2 (1<<5) /* voltage sense 2 */ -# define ACR1_SLOT_0_INPACK (1<<6) /* inpack pin status */ -# define ACR1_SLOT_1_CD1 (1<<8) /* card detect 1 */ -# define ACR1_SLOT_1_CD2 (1<<9) /* card detect 2 */ -# define ACR1_SLOT_1_READY (1<<10) /* ready */ -# define ACR1_SLOT_1_STATUS (1<<11) /* status change */ -# define ACR1_SLOT_1_VS1 (1<<12) /* voltage sense 1 */ -# define ACR1_SLOT_1_VS2 (1<<13) /* voltage sense 2 */ -# define ACR1_SLOT_1_INPACK (1<<14) /* inpack pin status */ - -#define CPLD_AUX0 0xBE00000C -#define CPLD_AUX1 0xBE000010 -#define CPLD_AUX2 0xBE000014 +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) + +#define PB1000_PCR 0xBE000000 +# define PCR_SLOT_0_VPP0 (1 << 0) +# define PCR_SLOT_0_VPP1 (1 << 1) +# define PCR_SLOT_0_VCC0 (1 << 2) +# define PCR_SLOT_0_VCC1 (1 << 3) +# define PCR_SLOT_0_RST (1 << 4) +# define PCR_SLOT_1_VPP0 (1 << 8) +# define PCR_SLOT_1_VPP1 (1 << 9) +# define PCR_SLOT_1_VCC0 (1 << 10) +# define PCR_SLOT_1_VCC1 (1 << 11) +# define PCR_SLOT_1_RST (1 << 12) + +#define PB1000_MDR 0xBE000004 +# define MDR_PI (1 << 5) /* PCMCIA int latch */ +# define MDR_EPI (1 << 14) /* enable PCMCIA int */ +# define MDR_CPI (1 << 15) /* clear PCMCIA int */ + +#define PB1000_ACR1 0xBE000008 +# define ACR1_SLOT_0_CD1 (1 << 0) /* card detect 1 */ +# define ACR1_SLOT_0_CD2 (1 << 1) /* card detect 2 */ +# define ACR1_SLOT_0_READY (1 << 2) /* ready */ +# define ACR1_SLOT_0_STATUS (1 << 3) /* status change */ +# define ACR1_SLOT_0_VS1 (1 << 4) /* voltage sense 1 */ +# define ACR1_SLOT_0_VS2 (1 << 5) /* voltage sense 2 */ +# define ACR1_SLOT_0_INPACK (1 << 6) /* inpack pin status */ +# define ACR1_SLOT_1_CD1 (1 << 8) /* card detect 1 */ +# define ACR1_SLOT_1_CD2 (1 << 9) /* card detect 2 */ +# define ACR1_SLOT_1_READY (1 << 10) /* ready */ +# define ACR1_SLOT_1_STATUS (1 << 11) /* status change */ +# define ACR1_SLOT_1_VS1 (1 << 12) /* voltage sense 1 */ +# define ACR1_SLOT_1_VS2 (1 << 13) /* voltage sense 2 */ +# define ACR1_SLOT_1_INPACK (1 << 14) /* inpack pin status */ + +#define CPLD_AUX0 0xBE00000C +#define CPLD_AUX1 0xBE000010 +#define CPLD_AUX2 0xBE000014 /* Voltage levels */ /* VPPEN1 - VPPEN0 */ -#define VPP_GND ((0<<1) | (0<<0)) -#define VPP_5V ((1<<1) | (0<<0)) -#define VPP_3V ((0<<1) | (1<<0)) -#define VPP_12V ((0<<1) | (1<<0)) -#define VPP_HIZ ((1<<1) | (1<<0)) +#define VPP_GND ((0 << 1) | (0 << 0)) +#define VPP_5V ((1 << 1) | (0 << 0)) +#define VPP_3V ((0 << 1) | (1 << 0)) +#define VPP_12V ((0 << 1) | (1 << 0)) +#define VPP_HIZ ((1 << 1) | (1 << 0)) /* VCCEN1 - VCCEN0 */ -#define VCC_3V ((0<<1) | (1<<0)) -#define VCC_5V ((1<<1) | (0<<0)) -#define VCC_HIZ ((0<<1) | (0<<0)) +#define VCC_3V ((0 << 1) | (1 << 0)) +#define VCC_5V ((1 << 1) | (0 << 0)) +#define VCC_HIZ ((0 << 1) | (0 << 0)) /* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT)\ - ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) - - -/* PCI PB1000 specific defines */ -/* The reason these defines are here instead of au1000.h is because - * the Au1000 does not have a PCI bus controller so the PCI implementation - * on the some of the older Pb1000 boards was very board specific. - */ -#define PCI_CONFIG_BASE 0xBA020000 /* the only external slot */ - -#define SDRAM_DEVID 0xBA010000 -#define SDRAM_CMD 0xBA010004 -#define SDRAM_CLASS 0xBA010008 -#define SDRAM_MISC 0xBA01000C -#define SDRAM_MBAR 0xBA010010 - -#define PCI_IO_DATA_PORT 0xBA800000 - -#define PCI_IO_ADDR 0xBE00001C -#define PCI_INT_ACK 0xBBC00000 -#define PCI_IO_READ 0xBBC00020 -#define PCI_IO_WRITE 0xBBC00030 - -#define PCI_BRIDGE_CONFIG 0xBE000018 - -#define PCI_IO_START 0x10000000 -#define PCI_IO_END 0x1000ffff -#define PCI_MEM_START 0x18000000 -#define PCI_MEM_END 0x18ffffff - -#define PCI_FIRST_DEVFN 0 -#define PCI_LAST_DEVFN 1 - -static inline u8 au_pci_io_readb(u32 addr) -{ - writel(addr, PCI_IO_ADDR); - writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG); - return (readl(PCI_IO_DATA_PORT) & 0xff); -} - -static inline u16 au_pci_io_readw(u32 addr) -{ - writel(addr, PCI_IO_ADDR); - writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG); - return (readl(PCI_IO_DATA_PORT) & 0xffff); -} - -static inline u32 au_pci_io_readl(u32 addr) -{ - writel(addr, PCI_IO_ADDR); - writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff), PCI_BRIDGE_CONFIG); - return readl(PCI_IO_DATA_PORT); -} - -static inline void au_pci_io_writeb(u8 val, u32 addr) -{ - writel(addr, PCI_IO_ADDR); - writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG); - writel(val, PCI_IO_DATA_PORT); -} - -static inline void au_pci_io_writew(u16 val, u32 addr) -{ - writel(addr, PCI_IO_ADDR); - writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG); - writel(val, PCI_IO_DATA_PORT); -} - -static inline void au_pci_io_writel(u32 val, u32 addr) -{ - writel(addr, PCI_IO_ADDR); - writel(readl(PCI_BRIDGE_CONFIG) & 0xffffcfff, PCI_BRIDGE_CONFIG); - writel(val, PCI_IO_DATA_PORT); -} - -static inline void set_sdram_extbyte(void) -{ - writel(readl(PCI_BRIDGE_CONFIG) & 0xffffff00, PCI_BRIDGE_CONFIG); -} - -static inline void set_slot_extbyte(void) -{ - writel((readl(PCI_BRIDGE_CONFIG) & 0xffffbf00) | 0x18, PCI_BRIDGE_CONFIG); -} +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) #endif /* __ASM_PB1000_H */ -- cgit v1.2.2