From db6cbc8cf2fa699a876e4f76ef069b9a2861900a Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 31 Mar 2009 03:44:22 -0300 Subject: V4L/DVB (11327): ov772x: add edge contrl support Signed-off-by: Kuninori Morimoto Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- include/media/ov772x.h | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'include') diff --git a/include/media/ov772x.h b/include/media/ov772x.h index 57db48dd85b8..30d9629198ef 100644 --- a/include/media/ov772x.h +++ b/include/media/ov772x.h @@ -17,10 +17,45 @@ #define OV772X_FLAG_VFLIP 0x00000001 /* Vertical flip image */ #define OV772X_FLAG_HFLIP 0x00000002 /* Horizontal flip image */ +/* + * for Edge ctrl + * + * strength also control Auto or Manual Edge Control Mode + * see also OV772X_MANUAL_EDGE_CTRL + */ +struct ov772x_edge_ctrl { + unsigned char strength; + unsigned char threshold; + unsigned char upper; + unsigned char lower; +}; + +#define OV772X_MANUAL_EDGE_CTRL 0x80 /* un-used bit of strength */ +#define EDGE_STRENGTH_MASK 0x1F +#define EDGE_THRESHOLD_MASK 0x0F +#define EDGE_UPPER_MASK 0xFF +#define EDGE_LOWER_MASK 0xFF + +#define OV772X_AUTO_EDGECTRL(u, l) \ +{ \ + .upper = (u & EDGE_UPPER_MASK), \ + .lower = (l & EDGE_LOWER_MASK), \ +} + +#define OV772X_MANUAL_EDGECTRL(s, t) \ +{ \ + .strength = (s & EDGE_STRENGTH_MASK) | OV772X_MANUAL_EDGE_CTRL,\ + .threshold = (t & EDGE_THRESHOLD_MASK), \ +} + +/* + * ov772x camera info + */ struct ov772x_camera_info { unsigned long buswidth; unsigned long flags; struct soc_camera_link link; + struct ov772x_edge_ctrl edgectrl; }; #endif /* __OV772X_H__ */ -- cgit v1.2.2 From e0d3bafd02586cfde286c320f56906fd9fa8d256 Mon Sep 17 00:00:00 2001 From: Sri Deevi Date: Tue, 3 Mar 2009 14:37:50 -0300 Subject: V4L/DVB (10954): Add cx231xx USB driver Signed-off-by: Srinivasa Deevi [mchehab@redhat.com: Remove the Kconfig changes, to avoid git breakages] Signed-off-by: Mauro Carvalho Chehab --- include/linux/i2c-id.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index f27604af8378..f9d48c9ad5d0 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -88,6 +88,7 @@ #define I2C_HW_B_CX2341X 0x010020 /* Conexant CX2341X MPEG encoder cards */ #define I2C_HW_B_CX23885 0x010022 /* conexant 23885 based tv cards (bus1) */ #define I2C_HW_B_AU0828 0x010023 /* auvitek au0828 usb bridge */ +#define I2C_HW_B_CX231XX 0x010024 /* Conexant CX231XX USB based cards */ #define I2C_HW_B_HDPVR 0x010025 /* Hauppauge HD PVR */ /* --- SGI adapters */ -- cgit v1.2.2 From b74c0aac357e5c71ee6de98b9887fe478bc73cf4 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 29 Mar 2009 18:00:07 -0300 Subject: V4L/DVB (11366): v4l: remove obsolete header and source v4l2-subdev.c and v4l2-i2c-drv-legacy.h were used to support the old i2c API. All v4l drivers are now converted to v4l2_subdev, so these two files can be removed. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-i2c-drv-legacy.h | 152 ------------------------------------ 1 file changed, 152 deletions(-) delete mode 100644 include/media/v4l2-i2c-drv-legacy.h (limited to 'include') diff --git a/include/media/v4l2-i2c-drv-legacy.h b/include/media/v4l2-i2c-drv-legacy.h deleted file mode 100644 index e65dd9d84e8b..000000000000 --- a/include/media/v4l2-i2c-drv-legacy.h +++ /dev/null @@ -1,152 +0,0 @@ -/* - * v4l2-i2c-drv-legacy.h - contains I2C handling code that's identical - * for all V4L2 I2C drivers. Use this header if the - * I2C driver is used by both legacy drivers and - * drivers converted to the bus-based I2C API. - * - * Copyright (C) 2007 Hans Verkuil - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* NOTE: the full version of this header is in the v4l-dvb repository - * and allows v4l i2c drivers to be compiled on older kernels as well. - * The version of this header as it appears in the kernel is a stripped - * version (without all the backwards compatibility stuff) and so it - * looks a bit odd. - * - * If you look at the full version then you will understand the reason - * for introducing this header since you really don't want to have all - * the tricky backwards compatibility code in each and every i2c driver. - */ - -struct v4l2_i2c_driver_data { - const char * const name; - int driverid; - int (*command)(struct i2c_client *client, unsigned int cmd, void *arg); - int (*probe)(struct i2c_client *client, const struct i2c_device_id *id); - int (*remove)(struct i2c_client *client); - int (*suspend)(struct i2c_client *client, pm_message_t state); - int (*resume)(struct i2c_client *client); - int (*legacy_probe)(struct i2c_adapter *adapter); - int legacy_class; - const struct i2c_device_id *id_table; -}; - -static struct v4l2_i2c_driver_data v4l2_i2c_data; -static const struct i2c_client_address_data addr_data; -static struct i2c_driver v4l2_i2c_driver_legacy; -static char v4l2_i2c_drv_name_legacy[32]; - -static int v4l2_i2c_drv_attach_legacy(struct i2c_adapter *adapter, int address, int kind) -{ - return v4l2_i2c_attach(adapter, address, &v4l2_i2c_driver_legacy, - v4l2_i2c_drv_name_legacy, v4l2_i2c_data.probe); -} - -static int v4l2_i2c_drv_probe_legacy(struct i2c_adapter *adapter) -{ - if (v4l2_i2c_data.legacy_probe) { - if (v4l2_i2c_data.legacy_probe(adapter)) - return i2c_probe(adapter, &addr_data, v4l2_i2c_drv_attach_legacy); - return 0; - } - if (adapter->class & v4l2_i2c_data.legacy_class) - return i2c_probe(adapter, &addr_data, v4l2_i2c_drv_attach_legacy); - return 0; -} - -static int v4l2_i2c_drv_detach_legacy(struct i2c_client *client) -{ - int err; - - if (v4l2_i2c_data.remove) - v4l2_i2c_data.remove(client); - - err = i2c_detach_client(client); - if (err) - return err; - kfree(client); - return 0; -} - -static int v4l2_i2c_drv_suspend_helper(struct i2c_client *client, pm_message_t state) -{ - return v4l2_i2c_data.suspend ? v4l2_i2c_data.suspend(client, state) : 0; -} - -static int v4l2_i2c_drv_resume_helper(struct i2c_client *client) -{ - return v4l2_i2c_data.resume ? v4l2_i2c_data.resume(client) : 0; -} - -/* ----------------------------------------------------------------------- */ - -/* i2c implementation */ -static struct i2c_driver v4l2_i2c_driver_legacy = { - .driver = { - .owner = THIS_MODULE, - }, - .attach_adapter = v4l2_i2c_drv_probe_legacy, - .detach_client = v4l2_i2c_drv_detach_legacy, - .suspend = v4l2_i2c_drv_suspend_helper, - .resume = v4l2_i2c_drv_resume_helper, -}; - -/* ----------------------------------------------------------------------- */ - -/* i2c implementation */ -static struct i2c_driver v4l2_i2c_driver = { - .suspend = v4l2_i2c_drv_suspend_helper, - .resume = v4l2_i2c_drv_resume_helper, -}; - -static int __init v4l2_i2c_drv_init(void) -{ - int err; - - strlcpy(v4l2_i2c_drv_name_legacy, v4l2_i2c_data.name, sizeof(v4l2_i2c_drv_name_legacy)); - strlcat(v4l2_i2c_drv_name_legacy, "'", sizeof(v4l2_i2c_drv_name_legacy)); - - if (v4l2_i2c_data.legacy_class == 0) - v4l2_i2c_data.legacy_class = I2C_CLASS_TV_ANALOG; - - v4l2_i2c_driver_legacy.driver.name = v4l2_i2c_drv_name_legacy; - v4l2_i2c_driver_legacy.id = v4l2_i2c_data.driverid; - v4l2_i2c_driver_legacy.command = v4l2_i2c_data.command; - err = i2c_add_driver(&v4l2_i2c_driver_legacy); - - if (err) - return err; - v4l2_i2c_driver.driver.name = v4l2_i2c_data.name; - v4l2_i2c_driver.id = v4l2_i2c_data.driverid; - v4l2_i2c_driver.command = v4l2_i2c_data.command; - v4l2_i2c_driver.probe = v4l2_i2c_data.probe; - v4l2_i2c_driver.remove = v4l2_i2c_data.remove; - v4l2_i2c_driver.id_table = v4l2_i2c_data.id_table; - err = i2c_add_driver(&v4l2_i2c_driver); - if (err) - i2c_del_driver(&v4l2_i2c_driver_legacy); - return err; -} - -static void __exit v4l2_i2c_drv_cleanup(void) -{ - i2c_del_driver(&v4l2_i2c_driver_legacy); - i2c_del_driver(&v4l2_i2c_driver); -} - -module_init(v4l2_i2c_drv_init); -module_exit(v4l2_i2c_drv_cleanup); -- cgit v1.2.2 From 78a3b4db2e53a1903c86e2856e175d85a3849e84 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 1 Apr 2009 03:41:09 -0300 Subject: V4L/DVB (11367): v4l2-common: remove legacy code Now that all drivers are converted to v4l2_subdev we can remove legacy code in v4l2-common. Also move the documentation of the internal API to v4l2-subdev.h where it really belongs. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-common.h | 135 +++----------------------------------------- include/media/v4l2-subdev.h | 107 +++++++++++++++++++++++++++++++---- 2 files changed, 104 insertions(+), 138 deletions(-) (limited to 'include') diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index 3a6905615d68..8ec50fea9e0d 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -125,7 +125,7 @@ int v4l2_chip_match_host(const struct v4l2_dbg_match *match); /* ------------------------------------------------------------------------- */ -/* Helper function for I2C legacy drivers */ +/* I2C Helper functions */ struct i2c_driver; struct i2c_adapter; @@ -135,9 +135,6 @@ struct v4l2_device; struct v4l2_subdev; struct v4l2_subdev_ops; -int v4l2_i2c_attach(struct i2c_adapter *adapter, int address, struct i2c_driver *driver, - const char *name, - int (*probe)(struct i2c_client *, const struct i2c_device_id *)); /* Load an i2c module and return an initialized v4l2_subdev struct. Only call request_module if module_name != NULL. @@ -171,139 +168,25 @@ const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type); /* ------------------------------------------------------------------------- */ -/* Internal ioctls */ - -/* VIDIOC_INT_DECODE_VBI_LINE */ -struct v4l2_decode_vbi_line { - u32 is_second_field; /* Set to 0 for the first (odd) field, - set to 1 for the second (even) field. */ - u8 *p; /* Pointer to the sliced VBI data from the decoder. - On exit points to the start of the payload. */ - u32 line; /* Line number of the sliced VBI data (1-23) */ - u32 type; /* VBI service type (V4L2_SLICED_*). 0 if no service found */ -}; +/* Note: these remaining ioctls should be removed as well, but they are still + used in tuner-simple.c (TUNER_SET_CONFIG) and cx18/ivtv (RESET and + S_AUDIO_ROUTING). To remove these ioctls some more cleanup is needed in + those modules. */ +/* s_config */ struct v4l2_priv_tun_config { int tuner; void *priv; }; - -/* audio ioctls */ - -/* v4l device was opened in Radio mode, to be replaced by VIDIOC_INT_S_TUNER_MODE */ -#define AUDC_SET_RADIO _IO('d',88) - -/* tuner ioctls */ - -/* Sets tuner type and its I2C addr */ -#define TUNER_SET_TYPE_ADDR _IOW('d', 90, int) - -/* Puts tuner on powersaving state, disabling it, except for i2c. To be replaced - by VIDIOC_INT_S_STANDBY. */ -#define TUNER_SET_STANDBY _IOW('d', 91, int) - -/* Sets tda9887 specific stuff, like port1, port2 and qss */ #define TUNER_SET_CONFIG _IOW('d', 92, struct v4l2_priv_tun_config) -/* Switch the tuner to a specific tuner mode. Replacement of AUDC_SET_RADIO */ -#define VIDIOC_INT_S_TUNER_MODE _IOW('d', 93, enum v4l2_tuner_type) - -/* Generic standby command. Passing -1 (all bits set to 1) will put the whole - chip into standby mode, value 0 will make the chip fully active. Specific - bits can be used by certain chips to enable/disable specific subsystems. - Replacement of TUNER_SET_STANDBY. */ -#define VIDIOC_INT_S_STANDBY _IOW('d', 94, u32) - -/* 100, 101 used by VIDIOC_DBG_[SG]_REGISTER */ - -/* Generic reset command. The argument selects which subsystems to reset. - Passing 0 will always reset the whole chip. */ -#define VIDIOC_INT_RESET _IOW ('d', 102, u32) - -/* Set the frequency (in Hz) of the audio clock output. - Used to slave an audio processor to the video decoder, ensuring that audio - and video remain synchronized. - Usual values for the frequency are 48000, 44100 or 32000 Hz. - If the frequency is not supported, then -EINVAL is returned. */ -#define VIDIOC_INT_AUDIO_CLOCK_FREQ _IOW ('d', 103, u32) - -/* Video decoders that support sliced VBI need to implement this ioctl. - Field p of the v4l2_sliced_vbi_line struct is set to the start of the VBI - data that was generated by the decoder. The driver then parses the sliced - VBI data and sets the other fields in the struct accordingly. The pointer p - is updated to point to the start of the payload which can be copied - verbatim into the data field of the v4l2_sliced_vbi_data struct. If no - valid VBI data was found, then the type field is set to 0 on return. */ -#define VIDIOC_INT_DECODE_VBI_LINE _IOWR('d', 104, struct v4l2_decode_vbi_line) - -/* Used to generate VBI signals on a video signal. v4l2_sliced_vbi_data is - filled with the data packets that should be output. Note that if you set - the line field to 0, then that VBI signal is disabled. If no - valid VBI data was found, then the type field is set to 0 on return. */ -#define VIDIOC_INT_S_VBI_DATA _IOW ('d', 105, struct v4l2_sliced_vbi_data) - -/* Used to obtain the sliced VBI packet from a readback register. Not all - video decoders support this. If no data is available because the readback - register contains invalid or erroneous data -EIO is returned. Note that - you must fill in the 'id' member and the 'field' member (to determine - whether CC data from the first or second field should be obtained). */ -#define VIDIOC_INT_G_VBI_DATA _IOWR('d', 106, struct v4l2_sliced_vbi_data) - -/* Sets I2S speed in bps. This is used to provide a standard way to select I2S - clock used by driving digital audio streams at some board designs. - Usual values for the frequency are 1024000 and 2048000. - If the frequency is not supported, then -EINVAL is returned. */ -#define VIDIOC_INT_I2S_CLOCK_FREQ _IOW ('d', 108, u32) - -/* Routing definition, device dependent. It specifies which inputs (if any) - should be routed to which outputs (if any). */ +/* s_routing: routing definition, device dependent. It specifies which inputs + (if any) should be routed to which outputs (if any). */ struct v4l2_routing { u32 input; u32 output; }; - -/* These internal commands should be used to define the inputs and outputs - of an audio/video chip. They will replace the v4l2 API commands - VIDIOC_S/G_INPUT, VIDIOC_S/G_OUTPUT, VIDIOC_S/G_AUDIO and VIDIOC_S/G_AUDOUT - that are meant to be used by the user. - The internal commands should be used to switch inputs/outputs - because only the driver knows how to map a 'Television' input to the precise - input/output routing of an A/D converter, or a DSP, or a video digitizer. - These four commands should only be sent directly to an i2c device, they - should not be broadcast as the routing is very device specific. */ #define VIDIOC_INT_S_AUDIO_ROUTING _IOW ('d', 109, struct v4l2_routing) -#define VIDIOC_INT_G_AUDIO_ROUTING _IOR ('d', 110, struct v4l2_routing) -#define VIDIOC_INT_S_VIDEO_ROUTING _IOW ('d', 111, struct v4l2_routing) -#define VIDIOC_INT_G_VIDEO_ROUTING _IOR ('d', 112, struct v4l2_routing) - -struct v4l2_crystal_freq { - u32 freq; /* frequency in Hz of the crystal */ - u32 flags; /* device specific flags */ -}; - -/* Sets the frequency of the crystal used to generate the clocks. - An extra flags field allows device specific configuration regarding - clock frequency dividers, etc. If not used, then set flags to 0. - If the frequency is not supported, then -EINVAL is returned. */ -#define VIDIOC_INT_S_CRYSTAL_FREQ _IOW('d', 113, struct v4l2_crystal_freq) - -/* Initialize the sensor registors to some sort of reasonable - default values. */ -#define VIDIOC_INT_INIT _IOW('d', 114, u32) - -/* Set v4l2_std_id for video OUTPUT devices. This is ignored by - video input devices. */ -#define VIDIOC_INT_S_STD_OUTPUT _IOW('d', 115, v4l2_std_id) - -/* Get v4l2_std_id for video OUTPUT devices. This is ignored by - video input devices. */ -#define VIDIOC_INT_G_STD_OUTPUT _IOW('d', 116, v4l2_std_id) - -/* Set GPIO pins. Very simple right now, might need to be extended with - a v4l2_gpio struct if a direction is also needed. */ -#define VIDIOC_INT_S_GPIO _IOW('d', 117, u32) - -/* Get input status. Same as the status field in the v4l2_input struct. */ -#define VIDIOC_INT_G_INPUT_STATUS _IOR('d', 118, u32) +#define VIDIOC_INT_RESET _IOW ('d', 102, u32) #endif /* V4L2_COMMON_H_ */ diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index 1d181b4ccb01..9a8535be1edf 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -27,6 +27,22 @@ struct v4l2_device; struct v4l2_subdev; struct tuner_setup; +/* decode_vbi_line */ +struct v4l2_decode_vbi_line { + u32 is_second_field; /* Set to 0 for the first (odd) field, + set to 1 for the second (even) field. */ + u8 *p; /* Pointer to the sliced VBI data from the decoder. + On exit points to the start of the payload. */ + u32 line; /* Line number of the sliced VBI data (1-23) */ + u32 type; /* VBI service type (V4L2_SLICED_*). 0 if no service found */ +}; + +/* s_crystal_freq */ +struct v4l2_crystal_freq { + u32 freq; /* frequency in Hz of the crystal */ + u32 flags; /* device specific flags */ +}; + /* Sub-devices are devices that are connected somehow to the main bridge device. These devices are usually audio/video muxers/encoders/decoders or sensors and webcam controllers. @@ -68,6 +84,21 @@ struct tuner_setup; the use-case it might be better to use subdev-specific ops (currently not yet implemented) since ops provide proper type-checking. */ + +/* init: initialize the sensor registors to some sort of reasonable default + values. Do not use for new drivers and should be removed in existing + drivers. + + reset: generic reset command. The argument selects which subsystems to + reset. Passing 0 will always reset the whole chip. Do not use for new + drivers without discussing this first on the linux-media mailinglist. + There should be no reason normally to reset a device. + + s_gpio: set GPIO pins. Very simple right now, might need to be extended with + a direction argument if needed. + + s_standby: puts tuner on powersaving state, disabling it, except for i2c. + */ struct v4l2_subdev_core_ops { int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip); int (*log_status)(struct v4l2_subdev *sd); @@ -89,6 +120,14 @@ struct v4l2_subdev_core_ops { #endif }; +/* s_mode: switch the tuner to a specific tuner mode. Replacement of s_radio. + + s_radio: v4l device was opened in Radio mode, to be replaced by s_mode. + + s_type_addr: sets tuner type and its I2C addr. + + s_config: sets tda9887 specific stuff, like port1, port2 and qss + */ struct v4l2_subdev_tuner_ops { int (*s_mode)(struct v4l2_subdev *sd, enum v4l2_tuner_type); int (*s_radio)(struct v4l2_subdev *sd); @@ -101,12 +140,68 @@ struct v4l2_subdev_tuner_ops { int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config); }; +/* s_clock_freq: set the frequency (in Hz) of the audio clock output. + Used to slave an audio processor to the video decoder, ensuring that + audio and video remain synchronized. Usual values for the frequency + are 48000, 44100 or 32000 Hz. If the frequency is not supported, then + -EINVAL is returned. + + s_i2s_clock_freq: sets I2S speed in bps. This is used to provide a standard + way to select I2S clock used by driving digital audio streams at some + board designs. Usual values for the frequency are 1024000 and 2048000. + If the frequency is not supported, then -EINVAL is returned. + + s_routing: used to define the input and/or output pins of an audio chip. + Never attempt to use user-level input IDs (e.g. Composite, S-Video, + Tuner) at this level. An i2c device shouldn't know about whether an + input pin is connected to a Composite connector, become on another + board or platform it might be connected to something else entirely. + The calling driver is responsible for mapping a user-level input to + the right pins on the i2c device. + */ struct v4l2_subdev_audio_ops { int (*s_clock_freq)(struct v4l2_subdev *sd, u32 freq); int (*s_i2s_clock_freq)(struct v4l2_subdev *sd, u32 freq); int (*s_routing)(struct v4l2_subdev *sd, const struct v4l2_routing *route); }; +/* + decode_vbi_line: video decoders that support sliced VBI need to implement + this ioctl. Field p of the v4l2_sliced_vbi_line struct is set to the + start of the VBI data that was generated by the decoder. The driver + then parses the sliced VBI data and sets the other fields in the + struct accordingly. The pointer p is updated to point to the start of + the payload which can be copied verbatim into the data field of the + v4l2_sliced_vbi_data struct. If no valid VBI data was found, then the + type field is set to 0 on return. + + s_vbi_data: used to generate VBI signals on a video signal. + v4l2_sliced_vbi_data is filled with the data packets that should be + output. Note that if you set the line field to 0, then that VBI signal + is disabled. If no valid VBI data was found, then the type field is + set to 0 on return. + + g_vbi_data: used to obtain the sliced VBI packet from a readback register. + Not all video decoders support this. If no data is available because + the readback register contains invalid or erroneous data -EIO is + returned. Note that you must fill in the 'id' member and the 'field' + member (to determine whether CC data from the first or second field + should be obtained). + + s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by + video input devices. + + s_crystal_freq: sets the frequency of the crystal used to generate the + clocks. An extra flags field allows device specific configuration + regarding clock frequency dividers, etc. If not used, then set flags + to 0. If the frequency is not supported, then -EINVAL is returned. + + g_input_status: get input status. Same as the status field in the v4l2_input + struct. + + s_routing: see s_routing in audio_ops, except this version is for video + devices. + */ struct v4l2_subdev_video_ops { int (*s_routing)(struct v4l2_subdev *sd, const struct v4l2_routing *route); int (*s_crystal_freq)(struct v4l2_subdev *sd, struct v4l2_crystal_freq *freq); @@ -163,18 +258,6 @@ static inline void *v4l2_get_subdevdata(const struct v4l2_subdev *sd) return sd->priv; } -/* Convert an ioctl-type command to the proper v4l2_subdev_ops function call. - This is used by subdev modules that can be called by both old-style ioctl - commands and through the v4l2_subdev_ops. - - The ioctl API of the subdev driver can call this function to call the - right ops based on the ioctl cmd and arg. - - Once all subdev drivers have been converted and all drivers no longer - use the ioctl interface, then this function can be removed. - */ -int v4l2_subdev_command(struct v4l2_subdev *sd, unsigned cmd, void *arg); - static inline void v4l2_subdev_init(struct v4l2_subdev *sd, const struct v4l2_subdev_ops *ops) { -- cgit v1.2.2 From 7c9fc9d50f97c9a6733ff1a22b6e31bcd91778e2 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 1 Apr 2009 03:49:59 -0300 Subject: V4L/DVB (11368): v4l2-subdev: move s_standby from core to tuner. s_standby is only used to put the tuner in powersaving mode, so move it from core to tuner. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-subdev.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index 9a8535be1edf..c84ff88c913f 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -96,14 +96,11 @@ struct v4l2_crystal_freq { s_gpio: set GPIO pins. Very simple right now, might need to be extended with a direction argument if needed. - - s_standby: puts tuner on powersaving state, disabling it, except for i2c. */ struct v4l2_subdev_core_ops { int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip); int (*log_status)(struct v4l2_subdev *sd); int (*init)(struct v4l2_subdev *sd, u32 val); - int (*s_standby)(struct v4l2_subdev *sd, u32 standby); int (*reset)(struct v4l2_subdev *sd, u32 val); int (*s_gpio)(struct v4l2_subdev *sd, u32 val); int (*queryctrl)(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc); @@ -127,6 +124,8 @@ struct v4l2_subdev_core_ops { s_type_addr: sets tuner type and its I2C addr. s_config: sets tda9887 specific stuff, like port1, port2 and qss + + s_standby: puts tuner on powersaving state, disabling it, except for i2c. */ struct v4l2_subdev_tuner_ops { int (*s_mode)(struct v4l2_subdev *sd, enum v4l2_tuner_type); @@ -138,6 +137,7 @@ struct v4l2_subdev_tuner_ops { int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm); int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type); int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config); + int (*s_standby)(struct v4l2_subdev *sd); }; /* s_clock_freq: set the frequency (in Hz) of the audio clock output. -- cgit v1.2.2 From cc26b076cf8b1040ccc514302ef9a24042272ec3 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 29 Mar 2009 19:20:26 -0300 Subject: V4L/DVB (11369): v4l2-subdev: add load_fw and use that instead of abusing core->init. The init callback was used in several places to load firmware. Make a separate load_fw callback for that. This makes the code a lot more understandable. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-subdev.h | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index c84ff88c913f..38b89cf7c995 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -89,7 +89,9 @@ struct v4l2_crystal_freq { values. Do not use for new drivers and should be removed in existing drivers. - reset: generic reset command. The argument selects which subsystems to + load_fw: load firmware. + + reset: generic reset command. The argument selects which subsystems to reset. Passing 0 will always reset the whole chip. Do not use for new drivers without discussing this first on the linux-media mailinglist. There should be no reason normally to reset a device. @@ -101,6 +103,7 @@ struct v4l2_subdev_core_ops { int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip); int (*log_status)(struct v4l2_subdev *sd); int (*init)(struct v4l2_subdev *sd, u32 val); + int (*load_fw)(struct v4l2_subdev *sd); int (*reset)(struct v4l2_subdev *sd, u32 val); int (*s_gpio)(struct v4l2_subdev *sd, u32 val); int (*queryctrl)(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc); @@ -175,31 +178,31 @@ struct v4l2_subdev_audio_ops { v4l2_sliced_vbi_data struct. If no valid VBI data was found, then the type field is set to 0 on return. - s_vbi_data: used to generate VBI signals on a video signal. + s_vbi_data: used to generate VBI signals on a video signal. v4l2_sliced_vbi_data is filled with the data packets that should be output. Note that if you set the line field to 0, then that VBI signal is disabled. If no valid VBI data was found, then the type field is set to 0 on return. - g_vbi_data: used to obtain the sliced VBI packet from a readback register. + g_vbi_data: used to obtain the sliced VBI packet from a readback register. Not all video decoders support this. If no data is available because the readback register contains invalid or erroneous data -EIO is returned. Note that you must fill in the 'id' member and the 'field' member (to determine whether CC data from the first or second field should be obtained). - s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by + s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by video input devices. - s_crystal_freq: sets the frequency of the crystal used to generate the + s_crystal_freq: sets the frequency of the crystal used to generate the clocks. An extra flags field allows device specific configuration regarding clock frequency dividers, etc. If not used, then set flags to 0. If the frequency is not supported, then -EINVAL is returned. - g_input_status: get input status. Same as the status field in the v4l2_input + g_input_status: get input status. Same as the status field in the v4l2_input struct. - s_routing: see s_routing in audio_ops, except this version is for video + s_routing: see s_routing in audio_ops, except this version is for video devices. */ struct v4l2_subdev_video_ops { -- cgit v1.2.2 From f41737ece472cd803ffb24ac9f5d6fdd1d871341 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 1 Apr 2009 03:52:39 -0300 Subject: V4L/DVB (11370): v4l2-subdev: move s_std from tuner to core. s_std didn't belong in the tuner ops. Stricly speaking it should be part of the video ops, but it is used by audio and tuner devices as well, so it is more efficient to make it part of the core ops. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-subdev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index 38b89cf7c995..b4e48dc3f2ba 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -113,6 +113,7 @@ struct v4l2_subdev_core_ops { int (*s_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls); int (*try_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls); int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm); + int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm); long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg); #ifdef CONFIG_VIDEO_ADV_DEBUG int (*g_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg); @@ -137,7 +138,6 @@ struct v4l2_subdev_tuner_ops { int (*g_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq); int (*g_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt); int (*s_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt); - int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm); int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type); int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config); int (*s_standby)(struct v4l2_subdev *sd); -- cgit v1.2.2 From 0c84674353a8c344d169aabce4dc4d44daaa270d Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 29 Mar 2009 19:40:01 -0300 Subject: V4L/DVB (11371): v4l2: remove legacy fields in v4l2-i2c-drv.h. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-i2c-drv.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include') diff --git a/include/media/v4l2-i2c-drv.h b/include/media/v4l2-i2c-drv.h index efdc8bf27f87..1ceeb9cfc8a8 100644 --- a/include/media/v4l2-i2c-drv.h +++ b/include/media/v4l2-i2c-drv.h @@ -39,14 +39,11 @@ struct v4l2_i2c_driver_data { const char * const name; - int driverid; int (*command)(struct i2c_client *client, unsigned int cmd, void *arg); int (*probe)(struct i2c_client *client, const struct i2c_device_id *id); int (*remove)(struct i2c_client *client); int (*suspend)(struct i2c_client *client, pm_message_t state); int (*resume)(struct i2c_client *client); - int (*legacy_probe)(struct i2c_adapter *adapter); - int legacy_class; const struct i2c_device_id *id_table; }; @@ -59,7 +56,6 @@ static struct i2c_driver v4l2_i2c_driver; static int __init v4l2_i2c_drv_init(void) { v4l2_i2c_driver.driver.name = v4l2_i2c_data.name; - v4l2_i2c_driver.id = v4l2_i2c_data.driverid; v4l2_i2c_driver.command = v4l2_i2c_data.command; v4l2_i2c_driver.probe = v4l2_i2c_data.probe; v4l2_i2c_driver.remove = v4l2_i2c_data.remove; -- cgit v1.2.2 From acebc70d4a789df21270690c70928b8a836caad7 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 29 Mar 2009 20:04:44 -0300 Subject: V4L/DVB (11372): v4l2: use old-style i2c API for kernels < 2.6.26 instead of < 2.6.22 Originally the intention was to switch to the new style i2c API starting with the introduction of the API in 2.6.22. However, the i2c_new_probed_device() function has a lethal bug that wasn't fixed until 2.6.25. Or more accurately, it was only fixed in the stable series of 2.6.25 and 2.6.26. Given the fact that the new i2c API also changed starting with 2.6.26 (the addition of i2c_device_id), it is easiest to switch APIs starting with 2.6.26. This patch updates all the legacy code accordingly. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-i2c-drv.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/media/v4l2-i2c-drv.h b/include/media/v4l2-i2c-drv.h index 1ceeb9cfc8a8..10a2882c3cbf 100644 --- a/include/media/v4l2-i2c-drv.h +++ b/include/media/v4l2-i2c-drv.h @@ -51,7 +51,7 @@ static struct v4l2_i2c_driver_data v4l2_i2c_data; static struct i2c_driver v4l2_i2c_driver; -/* Bus-based I2C implementation for kernels >= 2.6.22 */ +/* Bus-based I2C implementation for kernels >= 2.6.26 */ static int __init v4l2_i2c_drv_init(void) { -- cgit v1.2.2 From 868f985c2fb85b5f32785bb55a349d180a30f3d3 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 30 Mar 2009 11:40:54 -0300 Subject: V4L/DVB (11374): v4l2-common: add v4l2_i2c_new_probed_subdev_addr Add utility function to probe for a single address, rather than a list of addresses. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-common.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index 8ec50fea9e0d..1613a0ab8b04 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -147,6 +147,10 @@ struct v4l2_subdev *v4l2_i2c_new_subdev(struct i2c_adapter *adapter, struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct i2c_adapter *adapter, const char *module_name, const char *client_type, const unsigned short *addrs); +/* Like v4l2_i2c_new_probed_subdev, except probe for a single address. */ +struct v4l2_subdev *v4l2_i2c_new_probed_subdev_addr(struct v4l2_device *v4l2_dev, + struct i2c_adapter *adapter, + const char *module_name, const char *client_type, u8 addr); /* Initialize an v4l2_subdev with data from an i2c_client struct */ void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client, const struct v4l2_subdev_ops *ops); -- cgit v1.2.2 From e6574f2fbecdb8af807169d345c10131ae060a88 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 1 Apr 2009 03:57:53 -0300 Subject: V4L/DVB (11373): v4l2-common: add explicit v4l2_device pointer as first arg to new_(probed)_subdev The functions v4l2_i2c_new_subdev and v4l2_i2c_new_probed_subdev relied on i2c_get_adapdata to return the v4l2_device. However, this is not always possible on embedded platforms. So modify the API to pass the v4l2_device pointer explicitly. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-common.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index 1613a0ab8b04..01302f19bc91 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -139,12 +139,14 @@ struct v4l2_subdev_ops; /* Load an i2c module and return an initialized v4l2_subdev struct. Only call request_module if module_name != NULL. The client_type argument is the name of the chip that's on the adapter. */ -struct v4l2_subdev *v4l2_i2c_new_subdev(struct i2c_adapter *adapter, +struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev, + struct i2c_adapter *adapter, const char *module_name, const char *client_type, u8 addr); /* Probe and load an i2c module and return an initialized v4l2_subdev struct. Only call request_module if module_name != NULL. The client_type argument is the name of the chip that's on the adapter. */ -struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct i2c_adapter *adapter, +struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct v4l2_device *v4l2_dev, + struct i2c_adapter *adapter, const char *module_name, const char *client_type, const unsigned short *addrs); /* Like v4l2_i2c_new_probed_subdev, except probe for a single address. */ -- cgit v1.2.2 From 940088a16221fa517f5b921266afa8e46f49b784 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 1 Apr 2009 04:00:30 -0300 Subject: V4L/DVB (11376): tvaudio.h: add static inline to retrieve the list of possible i2c addrs. Rather than duplicating this list everywhere, just put it in tvaudio.h. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/tvaudio.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include') diff --git a/include/media/tvaudio.h b/include/media/tvaudio.h index 6915aafc875a..1ac8184693f8 100644 --- a/include/media/tvaudio.h +++ b/include/media/tvaudio.h @@ -21,10 +21,29 @@ #ifndef _TVAUDIO_H #define _TVAUDIO_H +#include + /* The tvaudio module accepts the following inputs: */ #define TVAUDIO_INPUT_TUNER 0 #define TVAUDIO_INPUT_RADIO 1 #define TVAUDIO_INPUT_EXTERN 2 #define TVAUDIO_INPUT_INTERN 3 +static inline const unsigned short *tvaudio_addrs(void) +{ + static const unsigned short addrs[] = { + I2C_ADDR_TDA8425 >> 1, + I2C_ADDR_TEA6300 >> 1, + I2C_ADDR_TEA6420 >> 1, + I2C_ADDR_TDA9840 >> 1, + I2C_ADDR_TDA985x_L >> 1, + I2C_ADDR_TDA985x_H >> 1, + I2C_ADDR_TDA9874 >> 1, + I2C_ADDR_PIC16C54 >> 1, + I2C_CLIENT_END + }; + + return addrs; +} + #endif -- cgit v1.2.2 From 3ff4ad815c5824ab35375d72ea8fe14fb3230daa Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 1 Apr 2009 03:15:52 -0300 Subject: V4L/DVB (11377): v4l: increase version numbers of drivers converted to v4l2_subdev. With all the v4l2_subdev changes that were made to these drivers it is a good idea to increase the version number of each driver. It's just the patch level that is increased, except for the zoran and saa7146 drivers where the minor number was increased due to the more substantial changes that were made to those two drivers. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/saa7146.h | 2 +- include/media/v4l2-subdev.h | 12 +++--------- 2 files changed, 4 insertions(+), 10 deletions(-) (limited to 'include') diff --git a/include/media/saa7146.h b/include/media/saa7146.h index fff4235adae5..7a9f76ecbbbd 100644 --- a/include/media/saa7146.h +++ b/include/media/saa7146.h @@ -18,7 +18,7 @@ #include /* for vmalloc() */ #include /* for vmalloc_to_page() */ -#define SAA7146_VERSION_CODE 0x000500 /* 0.5.0 */ +#define SAA7146_VERSION_CODE 0x000600 /* 0.6.0 */ #define saa7146_write(sxy,adr,dat) writel((dat),(sxy->mem+(adr))) #define saa7146_read(sxy,adr) readl(sxy->mem+(adr)) diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index b4e48dc3f2ba..df4a76800bd6 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -37,12 +37,6 @@ struct v4l2_decode_vbi_line { u32 type; /* VBI service type (V4L2_SLICED_*). 0 if no service found */ }; -/* s_crystal_freq */ -struct v4l2_crystal_freq { - u32 freq; /* frequency in Hz of the crystal */ - u32 flags; /* device specific flags */ -}; - /* Sub-devices are devices that are connected somehow to the main bridge device. These devices are usually audio/video muxers/encoders/decoders or sensors and webcam controllers. @@ -194,8 +188,8 @@ struct v4l2_subdev_audio_ops { s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by video input devices. - s_crystal_freq: sets the frequency of the crystal used to generate the - clocks. An extra flags field allows device specific configuration + s_crystal_freq: sets the frequency of the crystal used to generate the + clocks in Hz. An extra flags field allows device specific configuration regarding clock frequency dividers, etc. If not used, then set flags to 0. If the frequency is not supported, then -EINVAL is returned. @@ -207,7 +201,7 @@ struct v4l2_subdev_audio_ops { */ struct v4l2_subdev_video_ops { int (*s_routing)(struct v4l2_subdev *sd, const struct v4l2_routing *route); - int (*s_crystal_freq)(struct v4l2_subdev *sd, struct v4l2_crystal_freq *freq); + int (*s_crystal_freq)(struct v4l2_subdev *sd, u32 freq, u32 flags); int (*decode_vbi_line)(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi_line); int (*s_vbi_data)(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *vbi_data); int (*g_vbi_data)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *vbi_data); -- cgit v1.2.2 From 5325b4272a53b43f55b82cc369c310c2fcacdca1 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 2 Apr 2009 11:26:22 -0300 Subject: V4L/DVB (11380): v4l2-subdev: change s_routing prototype It is no longer needed to use a struct pointer as argument, since v4l2_subdev doesn't require that ioctl-like approach anymore. Instead just pass the input, output and config (new!) arguments directly. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/msp3400.h | 4 ++-- include/media/v4l2-subdev.h | 7 ++++--- 2 files changed, 6 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/media/msp3400.h b/include/media/msp3400.h index 6ab854931c05..90cf22ada8b4 100644 --- a/include/media/msp3400.h +++ b/include/media/msp3400.h @@ -54,13 +54,13 @@ ======= So to specify a complete routing scheme for the msp3400 you will have to - specify in the 'input' field of the v4l2_routing struct: + specify in the 'input' arg of the s_routing function: 1) which tuner input to use 2) which SCART input to use 3) which DSP input to use for each DSP output - And in the 'output' field of the v4l2_routing struct you specify: + And in the 'output' arg of the s_routing function you specify: 1) which SCART input to use for each SCART output diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index df4a76800bd6..17856081c809 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -148,7 +148,8 @@ struct v4l2_subdev_tuner_ops { board designs. Usual values for the frequency are 1024000 and 2048000. If the frequency is not supported, then -EINVAL is returned. - s_routing: used to define the input and/or output pins of an audio chip. + s_routing: used to define the input and/or output pins of an audio chip, + and any additional configuration data. Never attempt to use user-level input IDs (e.g. Composite, S-Video, Tuner) at this level. An i2c device shouldn't know about whether an input pin is connected to a Composite connector, become on another @@ -159,7 +160,7 @@ struct v4l2_subdev_tuner_ops { struct v4l2_subdev_audio_ops { int (*s_clock_freq)(struct v4l2_subdev *sd, u32 freq); int (*s_i2s_clock_freq)(struct v4l2_subdev *sd, u32 freq); - int (*s_routing)(struct v4l2_subdev *sd, const struct v4l2_routing *route); + int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config); }; /* @@ -200,7 +201,7 @@ struct v4l2_subdev_audio_ops { devices. */ struct v4l2_subdev_video_ops { - int (*s_routing)(struct v4l2_subdev *sd, const struct v4l2_routing *route); + int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config); int (*s_crystal_freq)(struct v4l2_subdev *sd, u32 freq, u32 flags); int (*decode_vbi_line)(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi_line); int (*s_vbi_data)(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *vbi_data); -- cgit v1.2.2 From 6c31e598368bfff49fc3e694c5b7624635871acb Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 2 Apr 2009 11:37:41 -0300 Subject: V4L/DVB (11381): ivtv/cx18: remove VIDIOC_INT_S_AUDIO_ROUTING debug support. Remove support for the debug call VIDIOC_INT_S_AUDIO_ROUTING from cx18 and ivtv. These internal ioctls shouldn't be exposed. These were only used through the cx18-ctl and ivtv-ctl utilities, and only when testing a new card variant. This cleanup allows the removal of this ioctl from v4l2-common.h. Cc: Andy Walls Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-common.h | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index 01302f19bc91..c48c24e4d0fa 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -174,10 +174,10 @@ const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type); /* ------------------------------------------------------------------------- */ -/* Note: these remaining ioctls should be removed as well, but they are still - used in tuner-simple.c (TUNER_SET_CONFIG) and cx18/ivtv (RESET and - S_AUDIO_ROUTING). To remove these ioctls some more cleanup is needed in - those modules. */ +/* Note: these remaining ioctls/structs should be removed as well, but they are + still used in tuner-simple.c (TUNER_SET_CONFIG), cx18/ivtv (RESET) and + v4l2-int-device.h (v4l2_routing). To remove these ioctls some more cleanup + is needed in those modules. */ /* s_config */ struct v4l2_priv_tun_config { @@ -186,13 +186,11 @@ struct v4l2_priv_tun_config { }; #define TUNER_SET_CONFIG _IOW('d', 92, struct v4l2_priv_tun_config) -/* s_routing: routing definition, device dependent. It specifies which inputs - (if any) should be routed to which outputs (if any). */ +#define VIDIOC_INT_RESET _IOW ('d', 102, u32) + struct v4l2_routing { u32 input; u32 output; }; -#define VIDIOC_INT_S_AUDIO_ROUTING _IOW ('d', 109, struct v4l2_routing) -#define VIDIOC_INT_RESET _IOW ('d', 102, u32) #endif /* V4L2_COMMON_H_ */ -- cgit v1.2.2 From dfa76fa2824967c0ec196fbcba36d3e74b66d3aa Mon Sep 17 00:00:00 2001 From: Adam Baker Date: Sun, 29 Mar 2009 19:17:10 -0300 Subject: V4L/DVB (11387): Sensor orientation reporting Add support to the SQ-905 driver to pass back to user space the sensor orientation information obtained from the camera during init. Modifies gspca and the videodev2.h header to create the necessary API. [mchehab@redhat.com: Changed "Output is" to "Frames are" at the comments, as suggested at LMML] Signed-off-by: Adam Baker Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 139d234923cd..ebb2ea6b4995 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -737,6 +737,11 @@ struct v4l2_input { #define V4L2_IN_ST_NO_SIGNAL 0x00000002 #define V4L2_IN_ST_NO_COLOR 0x00000004 +/* field 'status' - sensor orientation */ +/* If sensor is mounted upside down set both bits */ +#define V4L2_IN_ST_HFLIP 0x00000010 /* Frames are flipped horizontally */ +#define V4L2_IN_ST_VFLIP 0x00000020 /* Frames are flipped vertically */ + /* field 'status' - analog */ #define V4L2_IN_ST_NO_H_LOCK 0x00000100 /* No horizontal sync lock */ #define V4L2_IN_ST_COLOR_KILL 0x00000200 /* Color killer is active */ -- cgit v1.2.2