From 986733e01d258c26107f1da9d8d47c718349ad2f Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 15 May 2006 09:43:58 -0700 Subject: [PATCH] RCU: introduce rcu_needs_cpu() interface With "Paul E. McKenney" Introduce rcu_needs_cpu() interface. This can be used to tell if there will be a new rcu batch on a cpu soon by looking at the curlist pointer. This can be used to avoid to enter a tickless idle state where the cpu would miss that a new batch is ready when rcu_start_batch would be called on a different cpu. Signed-off-by: Heiko Carstens Cc: "Paul E. McKenney" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/rcupdate.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 5673008b61e1..970284f571a6 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -132,6 +132,7 @@ static inline void rcu_bh_qsctr_inc(int cpu) } extern int rcu_pending(int cpu); +extern int rcu_needs_cpu(int cpu); /** * rcu_read_lock - mark the beginning of an RCU read-side critical section. -- cgit v1.2.2 From 0159677857c5ada0a0a2c03a4dd59312382b73d0 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 15 May 2006 09:44:05 -0700 Subject: [PATCH] s390: add vmsplice system call Add new vmsplice system call and add missing __NR_xxx defines for sys_set_robust_list, sys_get_robust_list, sys_splice, sys_sync_file_range and sys_tee. Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-s390/unistd.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-s390/unistd.h b/include/asm-s390/unistd.h index 657d582e8149..41c2792ff6b0 100644 --- a/include/asm-s390/unistd.h +++ b/include/asm-s390/unistd.h @@ -296,8 +296,14 @@ #define __NR_pselect6 301 #define __NR_ppoll 302 #define __NR_unshare 303 +#define __NR_set_robust_list 304 +#define __NR_get_robust_list 305 +#define __NR_splice 306 +#define __NR_sync_file_range 307 +#define __NR_tee 308 +#define __NR_vmsplice 309 -#define NR_syscalls 304 +#define NR_syscalls 310 /* * There are some system calls that are not present on 64 bit, some -- cgit v1.2.2 From 5e376613899076396d0c97de67ad072587267370 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Mon, 15 May 2006 09:44:06 -0700 Subject: [PATCH] symbol_put_addr() locks kernel Even since a previous patch: Fix race between CONFIG_DEBUG_SLABALLOC and modules Sun, 27 Jun 2004 17:55:19 +0000 (17:55 +0000) http://www.kernel.org/git/?p=linux/kernel/git/torvalds/old-2.6-bkcvs.git;a=commit;h=92b3db26d31cf21b70e3c1eadc56c179506d8fbe The function symbol_put_addr() will deadlock the kernel. symbol_put_addr() would acquire modlist_lock, then while holding the lock call two functions kernel_text_address() and module_text_address() which also try to acquire the same lock. This deadlocks the kernel of course. This patch changes symbol_put_addr() to not acquire the modlist_lock, it doesn't need it since it never looks at the module list directly. Also, it now uses core_kernel_text() instead of kernel_text_address(). The latter has an additional check for addr inside a module, but we don't need to do that since we call module_text_address() (the same function kernel_text_address uses) ourselves. Signed-off-by: Trent Piepho Cc: Zwane Mwaikambo Acked-by: Rusty Russell Cc: Johannes Stezenbach Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index e1bd0842f6a1..f4fc576ed4c4 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -124,6 +124,7 @@ extern int get_option(char **str, int *pint); extern char *get_options(const char *str, int nints, int *ints); extern unsigned long long memparse(char *ptr, char **retptr); +extern int core_kernel_text(unsigned long addr); extern int __kernel_text_address(unsigned long addr); extern int kernel_text_address(unsigned long addr); extern int session_of_pgrp(int pgrp); -- cgit v1.2.2 From 39d24e64263cd3211705d3b61ea4171c65030921 Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Mon, 15 May 2006 09:44:13 -0700 Subject: [PATCH] add slab_is_available() routine for boot code slab_is_available() indicates slab based allocators are available for use. SPARSEMEM code needs to know this as it can be called at various times during the boot process. Signed-off-by: Mike Kravetz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/slab.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/slab.h b/include/linux/slab.h index 3af03b19c983..2d985d59c7b8 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -150,6 +150,7 @@ static inline void *kcalloc(size_t n, size_t size, gfp_t flags) extern void kfree(const void *); extern unsigned int ksize(const void *); +extern int slab_is_available(void); #ifdef CONFIG_NUMA extern void *kmem_cache_alloc_node(kmem_cache_t *, gfp_t flags, int node); -- cgit v1.2.2 From e6333fd4ddf7a583480017f535b9ea53c116ab81 Mon Sep 17 00:00:00 2001 From: Hua Zhong Date: Mon, 15 May 2006 09:44:22 -0700 Subject: [PATCH] fix can_share_swap_page() when !CONFIG_SWAP can_share_swap_page() is used to check if the page has the last reference. This avoids allocating a new page for COW if it's the last page. However, if CONFIG_SWAP is not set, can_share_swap_page() is defined as 0, thus always causes a copy for the last COW page. The below simple patch fixes it. Signed-off-by: Hua Zhong Cc: David Howells Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/swap.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/swap.h b/include/linux/swap.h index 5b1fdf1cff4f..f03c24719302 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -296,7 +296,7 @@ static inline void disable_swap_token(void) #define read_swap_cache_async(swp,vma,addr) NULL #define lookup_swap_cache(swp) NULL #define valid_swaphandles(swp, off) 0 -#define can_share_swap_page(p) 0 +#define can_share_swap_page(p) (page_mapcount(p) == 1) #define move_to_swap_cache(p, swp) 1 #define move_from_swap_cache(p, i, m) 1 #define __delete_from_swap_cache(p) /*NOTHING*/ -- cgit v1.2.2 From 2ceec0c8c6e2780d58dece91b4b787729405d9e7 Mon Sep 17 00:00:00 2001 From: Uwe Zeisberger Date: Wed, 10 May 2006 18:11:05 +0100 Subject: [ARM] 3517/1: move definition of PROC_INFO_SZ from procinfo.h to asm-offsets.h Patch from Uwe Zeisberger The symbol is only used in arch/arm/kernel/head-common.S. This in turn is included from arch/arm/kernel/head.S and arch/arm/kernel/head-nommu.S which include asm-offsets.h . Signed-off-by: Uwe Zeisberger Signed-off-by: Russell King --- include/asm-arm/procinfo.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/asm-arm/procinfo.h b/include/asm-arm/procinfo.h index a9c75b2c314f..842526055225 100644 --- a/include/asm-arm/procinfo.h +++ b/include/asm-arm/procinfo.h @@ -45,8 +45,6 @@ extern unsigned int elf_hwcap; #endif /* __ASSEMBLY__ */ -#define PROC_INFO_SZ 48 - #define HWCAP_SWP 1 #define HWCAP_HALF 2 #define HWCAP_THUMB 4 -- cgit v1.2.2 From 4cff33f94fefcce1b3c01a9d1da6bb85fe3cbdfa Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Fri, 17 Feb 2006 10:02:18 -0800 Subject: [PATCH] SPI: per-transfer overrides for wordsize and clocking Some protocols (like one for some bitmap displays) require different clock speed or word size settings for each transfer in an SPI message. This adds those parameters to struct spi_transfer. They are to be used when they are nonzero; otherwise the defaults from spi_device are to be used. The patch also adds a setup_transfer callback to spi_bitbang, uses it for messages that use those overrides, and implements it so that the pure bitbanging code can help resolve any questions about how it should work. Signed-off-by: Imre Deak Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/spi/spi.h | 8 ++++++++ include/linux/spi/spi_bitbang.h | 6 ++++++ 2 files changed, 14 insertions(+) (limited to 'include') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index b05f1463a267..caa4665e3fa2 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -31,6 +31,7 @@ extern struct bus_type spi_bus_type; * @master: SPI controller used with the device. * @max_speed_hz: Maximum clock rate to be used with this chip * (on this board); may be changed by the device's driver. + * The spi_transfer.speed_hz can override this for each transfer. * @chip-select: Chipselect, distinguishing chips handled by "master". * @mode: The spi mode defines how data is clocked out and in. * This may be changed by the device's driver. @@ -38,6 +39,7 @@ extern struct bus_type spi_bus_type; * like eight or 12 bits are common. In-memory wordsizes are * powers of two bytes (e.g. 20 bit samples use 32 bits). * This may be changed by the device's driver. + * The spi_transfer.bits_per_word can override this for each transfer. * @irq: Negative, or the number passed to request_irq() to receive * interrupts from this device. * @controller_state: Controller's runtime state @@ -268,6 +270,10 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum); * @tx_dma: DMA address of tx_buf, if spi_message.is_dma_mapped * @rx_dma: DMA address of rx_buf, if spi_message.is_dma_mapped * @len: size of rx and tx buffers (in bytes) + * @speed_hz: Select a speed other then the device default for this + * transfer. If 0 the default (from spi_device) is used. + * @bits_per_word: select a bits_per_word other then the device default + * for this transfer. If 0 the default (from spi_device) is used. * @cs_change: affects chipselect after this transfer completes * @delay_usecs: microseconds to delay after this transfer before * (optionally) changing the chipselect status, then starting @@ -322,7 +328,9 @@ struct spi_transfer { dma_addr_t rx_dma; unsigned cs_change:1; + u8 bits_per_word; u16 delay_usecs; + u32 speed_hz; struct list_head transfer_list; }; diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h index c961fe9bf3eb..c954557b757c 100644 --- a/include/linux/spi/spi_bitbang.h +++ b/include/linux/spi/spi_bitbang.h @@ -30,6 +30,12 @@ struct spi_bitbang { struct spi_master *master; + /* setup_transfer() changes clock and/or wordsize to match settings + * for this transfer; zeroes restore defaults from spi_device. + */ + int (*setup_transfer)(struct spi_device *spi, + struct spi_transfer *t); + void (*chipselect)(struct spi_device *spi, int is_on); #define BITBANG_CS_ACTIVE 1 /* normally nCS, active low */ #define BITBANG_CS_INACTIVE 0 -- cgit v1.2.2 From e0c9905e87ac1bc56c9ea8f5b2934aeee53dce26 Mon Sep 17 00:00:00 2001 From: Stephen Street Date: Tue, 7 Mar 2006 23:53:24 -0800 Subject: [PATCH] SPI: add PXA2xx SSP SPI Driver This driver turns a PXA2xx synchronous serial port (SSP) into a SPI master controller (see Documentation/spi/spi_summary). The driver has the following features: - Support for any PXA2xx SSP - SSP PIO and SSP DMA data transfers. - External and Internal (SSPFRM) chip selects. - Per slave device (chip) configuration. - Full suspend, freeze, resume support. Signed-off-by: Stephen Street Signed-off-by: Andrew Morton Cc: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/asm-arm/arch-pxa/pxa2xx_spi.h | 68 +++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) create mode 100644 include/asm-arm/arch-pxa/pxa2xx_spi.h (limited to 'include') diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/include/asm-arm/arch-pxa/pxa2xx_spi.h new file mode 100644 index 000000000000..1e70908b816f --- /dev/null +++ b/include/asm-arm/arch-pxa/pxa2xx_spi.h @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef PXA2XX_SPI_H_ +#define PXA2XX_SPI_H_ + +#define PXA2XX_CS_ASSERT (0x01) +#define PXA2XX_CS_DEASSERT (0x02) + +#if defined(CONFIG_PXA25x) +#define CLOCK_SPEED_HZ 3686400 +#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/2/(x+1))<<8)&0x0000ff00) +#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) +#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) +#elif defined(CONFIG_PXA27x) +#define CLOCK_SPEED_HZ 13000000 +#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) +#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) +#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) +#endif + +#define SSP1_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(1))))) +#define SSP2_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(2))))) +#define SSP3_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(3))))) + +enum pxa_ssp_type { + SSP_UNDEFINED = 0, + PXA25x_SSP, /* pxa 210, 250, 255, 26x */ + PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ + PXA27x_SSP, +}; + +/* device.platform_data for SSP controller devices */ +struct pxa2xx_spi_master { + enum pxa_ssp_type ssp_type; + u32 clock_enable; + u16 num_chipselect; + u8 enable_dma; +}; + +/* spi_board_info.controller_data for SPI slave devices, + * copied to spi_device.platform_data ... mostly for dma tuning + */ +struct pxa2xx_spi_chip { + u8 tx_threshold; + u8 rx_threshold; + u8 dma_burst_size; + u32 timeout_microsecs; + u8 enable_loopback; + void (*cs_control)(u32 command); +}; + +#endif /*PXA2XX_SPI_H_*/ -- cgit v1.2.2 From 747d844ee9a183ff3067bb1181f2a25c50649538 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 2 Apr 2006 10:33:37 -0800 Subject: [PATCH] SPI: spi whitespace fixes This removes superfluous whitespace in the header. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/spi/spi.h | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'include') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index caa4665e3fa2..082006714b85 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -36,15 +36,15 @@ extern struct bus_type spi_bus_type; * @mode: The spi mode defines how data is clocked out and in. * This may be changed by the device's driver. * @bits_per_word: Data transfers involve one or more words; word sizes - * like eight or 12 bits are common. In-memory wordsizes are + * like eight or 12 bits are common. In-memory wordsizes are * powers of two bytes (e.g. 20 bit samples use 32 bits). * This may be changed by the device's driver. * The spi_transfer.bits_per_word can override this for each transfer. * @irq: Negative, or the number passed to request_irq() to receive - * interrupts from this device. + * interrupts from this device. * @controller_state: Controller's runtime state * @controller_data: Board-specific definitions for controller, such as - * FIFO initialization parameters; from board_info.controller_data + * FIFO initialization parameters; from board_info.controller_data * * An spi_device is used to interchange data between an SPI slave * (usually a discrete chip) and CPU memory. @@ -145,13 +145,13 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * struct spi_master - interface to SPI master controller * @cdev: class interface to this driver * @bus_num: board-specific (and often SOC-specific) identifier for a - * given SPI controller. + * given SPI controller. * @num_chipselect: chipselects are used to distinguish individual - * SPI slaves, and are numbered from zero to num_chipselects. - * each slave has a chipselect signal, but it's common that not - * every chipselect is connected to a slave. + * SPI slaves, and are numbered from zero to num_chipselects. + * each slave has a chipselect signal, but it's common that not + * every chipselect is connected to a slave. * @setup: updates the device mode and clocking records used by a - * device's SPI controller; protocol code may call this. + * device's SPI controller; protocol code may call this. * @transfer: adds a message to the controller's transfer queue. * @cleanup: frees controller-specific state * @@ -276,8 +276,8 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum); * for this transfer. If 0 the default (from spi_device) is used. * @cs_change: affects chipselect after this transfer completes * @delay_usecs: microseconds to delay after this transfer before - * (optionally) changing the chipselect status, then starting - * the next transfer or completing this spi_message. + * (optionally) changing the chipselect status, then starting + * the next transfer or completing this spi_message. * @transfer_list: transfers are sequenced through spi_message.transfers * * SPI transfers always write the same number of bytes as they read. @@ -364,7 +364,7 @@ struct spi_transfer { * and its transfers, ignore them until its completion callback. */ struct spi_message { - struct list_head transfers; + struct list_head transfers; struct spi_device *spi; @@ -382,7 +382,7 @@ struct spi_message { */ /* completion is reported through a callback */ - void (*complete)(void *context); + void (*complete)(void *context); void *context; unsigned actual_length; int status; -- cgit v1.2.2 From ff9f4771b5f017ee0f57629488b6cd7a6ef3d19b Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sun, 2 Apr 2006 16:06:35 -0500 Subject: [PATCH] SPI: Renamed bitbang_transfer_setup to spi_bitbang_setup_transfer and export it Renamed bitbang_transfer_setup to follow convention of other exported symbols from spi-bitbang. Exported spi_bitbang_setup_transfer to allow users of spi-bitbang to use the function in their own setup_transfer. Signed-off-by: Kumar Gala Cc: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/spi/spi_bitbang.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h index c954557b757c..16ce178f54d7 100644 --- a/include/linux/spi/spi_bitbang.h +++ b/include/linux/spi/spi_bitbang.h @@ -57,6 +57,8 @@ struct spi_bitbang { extern int spi_bitbang_setup(struct spi_device *spi); extern void spi_bitbang_cleanup(const struct spi_device *spi); extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m); +extern int spi_bitbang_setup_transfer(struct spi_device *spi, + struct spi_transfer *t); /* start or stop queue processing */ extern int spi_bitbang_start(struct spi_bitbang *spi); -- cgit v1.2.2 From ccf77cc4af5b048e20cfd9327fcc286cb69c34cc Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 3 Apr 2006 15:46:22 -0700 Subject: [PATCH] SPI: devices can require LSB-first encodings Add spi_device hook for LSB-first word encoding, and update all the (in-tree) controller drivers to reject such devices. Eventually, some controller drivers will be updated to support lsb-first encodings on the wire; no current drivers need this. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/spi/spi.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 082006714b85..77add901691d 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -35,10 +35,13 @@ extern struct bus_type spi_bus_type; * @chip-select: Chipselect, distinguishing chips handled by "master". * @mode: The spi mode defines how data is clocked out and in. * This may be changed by the device's driver. + * The "active low" default for chipselect mode can be overridden, + * as can the "MSB first" default for each word in a transfer. * @bits_per_word: Data transfers involve one or more words; word sizes * like eight or 12 bits are common. In-memory wordsizes are * powers of two bytes (e.g. 20 bit samples use 32 bits). - * This may be changed by the device's driver. + * This may be changed by the device's driver, or left at the + * default (0) indicating protocol words are eight bit bytes. * The spi_transfer.bits_per_word can override this for each transfer. * @irq: Negative, or the number passed to request_irq() to receive * interrupts from this device. @@ -67,6 +70,7 @@ struct spi_device { #define SPI_MODE_2 (SPI_CPOL|0) #define SPI_MODE_3 (SPI_CPOL|SPI_CPHA) #define SPI_CS_HIGH 0x04 /* chipselect active high? */ +#define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */ u8 bits_per_word; int irq; void *controller_state; @@ -75,7 +79,6 @@ struct spi_device { // likely need more hooks for more protocol options affecting how // the controller talks to each chip, like: - // - bit order (default is wordwise msb-first) // - memory packing (12 bit samples into low bits, others zeroed) // - priority // - drop chipselect after each word -- cgit v1.2.2 From a020ed7521a9737bcf3e34eb880867c60c3c68d0 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 3 Apr 2006 15:49:04 -0700 Subject: [PATCH] SPI: busnum == 0 needs to work We need to be able to have a "SPI bus 0" matching chip numbering; but that number was wrongly used to flag dynamic allocation of a bus number. This patch resolves that issue; now negative numbers trigger dynamic alloc. It also updates the how-to-write-a-controller-driver overview to mention this stuff. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/spi/spi.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 77add901691d..e928c0dcc297 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -172,13 +172,13 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) struct spi_master { struct class_device cdev; - /* other than zero (== assign one dynamically), bus_num is fully + /* other than negative (== assign one dynamically), bus_num is fully * board-specific. usually that simplifies to being SOC-specific. - * example: one SOC has three SPI controllers, numbered 1..3, + * example: one SOC has three SPI controllers, numbered 0..2, * and one board's schematics might show it using SPI-2. software * would normally use bus_num=2 for that controller. */ - u16 bus_num; + s16 bus_num; /* chipselects will be integral to many controllers; some others * might use board-specific GPIOs. -- cgit v1.2.2 From 8de8c8738086501bbe3057ed6f4b70dded657488 Mon Sep 17 00:00:00 2001 From: Sridhar Samudrala Date: Fri, 19 May 2006 10:58:12 -0700 Subject: [SCTP]: Set sk_err so that poll wakes up after a non-blocking connect failure. Also fix some other cases where sk_err is not set for 1-1 style sockets. Signed-off-by: Sridhar Samudrala --- include/net/sctp/command.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h index 34a1a09e5aef..807d6f1ef4b5 100644 --- a/include/net/sctp/command.h +++ b/include/net/sctp/command.h @@ -99,6 +99,7 @@ typedef enum { SCTP_CMD_DEL_NON_PRIMARY, /* Removes non-primary peer transports. */ SCTP_CMD_T3_RTX_TIMERS_STOP, /* Stops T3-rtx pending timers */ SCTP_CMD_FORCE_PRIM_RETRAN, /* Forces retrans. over primary path. */ + SCTP_CMD_SET_SK_ERR, /* Set sk_err */ SCTP_CMD_LAST } sctp_verb_t; -- cgit v1.2.2 From dd2d1c6f2958d027e4591ca5d2a04dfe36ca6512 Mon Sep 17 00:00:00 2001 From: Vladislav Yasevich Date: Fri, 19 May 2006 11:52:20 -0700 Subject: [SCTP]: Respect the real chunk length when walking parameters. When performing bound checks during the parameter processing, we want to use the real chunk and paramter lengths for bounds instead of the rounded ones. This prevents us from potentially walking of the end if the chunk length was miscalculated. We still use rounded lengths when advancing the pointer. This was found during a conformance test that changed the chunk length without modifying parameters. Signed-off-by: Vlad Yasevich Signed-off-by: Sridhar Samudrala --- include/net/sctp/sctp.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h index e673b2c984e9..aa6033ca7cd8 100644 --- a/include/net/sctp/sctp.h +++ b/include/net/sctp/sctp.h @@ -461,12 +461,12 @@ static inline int sctp_frag_point(const struct sctp_sock *sp, int pmtu) * there is room for a param header too. */ #define sctp_walk_params(pos, chunk, member)\ -_sctp_walk_params((pos), (chunk), WORD_ROUND(ntohs((chunk)->chunk_hdr.length)), member) +_sctp_walk_params((pos), (chunk), ntohs((chunk)->chunk_hdr.length), member) #define _sctp_walk_params(pos, chunk, end, member)\ for (pos.v = chunk->member;\ pos.v <= (void *)chunk + end - sizeof(sctp_paramhdr_t) &&\ - pos.v <= (void *)chunk + end - WORD_ROUND(ntohs(pos.p->length)) &&\ + pos.v <= (void *)chunk + end - ntohs(pos.p->length) &&\ ntohs(pos.p->length) >= sizeof(sctp_paramhdr_t);\ pos.v += WORD_ROUND(ntohs(pos.p->length))) @@ -477,7 +477,7 @@ _sctp_walk_errors((err), (chunk_hdr), ntohs((chunk_hdr)->length)) for (err = (sctp_errhdr_t *)((void *)chunk_hdr + \ sizeof(sctp_chunkhdr_t));\ (void *)err <= (void *)chunk_hdr + end - sizeof(sctp_errhdr_t) &&\ - (void *)err <= (void *)chunk_hdr + end - WORD_ROUND(ntohs(err->length)) &&\ + (void *)err <= (void *)chunk_hdr + end - ntohs(err->length) &&\ ntohs(err->length) >= sizeof(sctp_errhdr_t); \ err = (sctp_errhdr_t *)((void *)err + WORD_ROUND(ntohs(err->length)))) -- cgit v1.2.2 From 2c171bf13423dc5293188cea7f6c2da1720926e2 Mon Sep 17 00:00:00 2001 From: Pavel Pisa Date: Fri, 19 May 2006 21:48:03 +0100 Subject: [ARM] 3531/1: i.MX/MX1 SD/MMC ensure, that clock are stopped before new command and cleanups Patch from Pavel Pisa There has been problems that for some paths that clock are not stopped during new command programming and initiation. Result is issuing of incorrect command to the card. Some other problems are cleaned too. Noisy report of known ERRATUM #4 has been suppressed. Signed-off-by: Pavel Pisa Signed-off-by: Russell King --- include/linux/mmc/mmc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index bdc556d88498..03a14a30c46a 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -69,6 +69,7 @@ struct mmc_data { unsigned int timeout_ns; /* data timeout (in ns, max 80ms) */ unsigned int timeout_clks; /* data timeout (in clocks) */ unsigned int blksz_bits; /* data block size */ + unsigned int blksz; /* data block size */ unsigned int blocks; /* number of blocks */ unsigned int error; /* data error */ unsigned int flags; -- cgit v1.2.2 From c2a4c40651e08e465d3a6130bd9f6dcc1ce21d83 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 19 May 2006 21:55:35 +0100 Subject: [ARM] 3533/1: Implement the __raw_(read|write)_can_lock functions on ARM Patch from Catalin Marinas Recent patches introduced the write_can_lock() call in the kernel/ptrace.c file. Implement the __raw_* variants on ARM (SMP) as well. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- include/asm-arm/spinlock.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/asm-arm/spinlock.h b/include/asm-arm/spinlock.h index 43ad4e55878c..406ca97a8ab2 100644 --- a/include/asm-arm/spinlock.h +++ b/include/asm-arm/spinlock.h @@ -142,6 +142,9 @@ static inline void __raw_write_unlock(raw_rwlock_t *rw) : "cc"); } +/* write_can_lock - would write_trylock() succeed? */ +#define __raw_write_can_lock(x) ((x)->lock == 0x80000000) + /* * Read locks are a bit more hairy: * - Exclusively load the lock value. @@ -198,4 +201,7 @@ static inline void __raw_read_unlock(raw_rwlock_t *rw) #define __raw_read_trylock(lock) generic__raw_read_trylock(lock) +/* read_can_lock - would read_trylock() succeed? */ +#define __raw_read_can_lock(x) ((x)->lock < 0x80000000) + #endif /* __ASM_SPINLOCK_H */ -- cgit v1.2.2