From 9f1ba9062e032fb7b395cd27fc564754fe4e9867 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 7 Aug 2008 20:07:01 +0300 Subject: mac80211/cfg80211: Add BSS configuration options for AP mode This change adds a new cfg80211 command, NL80211_CMD_SET_BSS, to allow AP mode BSS parameters to be changed from user space (e.g., hostapd). The drivers using mac80211 are expected to be modified with separate changes to use the new BSS info parameter for short slot time in the bss_info_changed() handler. Signed-off-by: Jouni Malinen Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 19 +++++++++++++++++++ include/net/cfg80211.h | 22 ++++++++++++++++++++++ include/net/mac80211.h | 9 +++++++++ 3 files changed, 50 insertions(+) (limited to 'include') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 2be7c63bc0f2..447c02a5190e 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -89,6 +89,8 @@ * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC * or, if no MAC address given, all mesh paths, on the interface identified * by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by + * %NL80211_ATTR_IFINDEX. * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use @@ -127,6 +129,8 @@ enum nl80211_commands { NL80211_CMD_NEW_MPATH, NL80211_CMD_DEL_MPATH, + NL80211_CMD_SET_BSS, + /* add commands here */ /* used to define NL80211_CMD_MAX below */ @@ -134,6 +138,11 @@ enum nl80211_commands { NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 }; +/* + * Allow user space programs to use #ifdef on new commands by defining them + * here + */ +#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS /** * enum nl80211_attrs - nl80211 netlink attributes @@ -192,6 +201,12 @@ enum nl80211_commands { * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of * &enum nl80211_mntr_flags. * + * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) + * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled + * (u8, 0 or 1) + * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled + * (u8, 0 or 1) + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -235,6 +250,10 @@ enum nl80211_attrs { NL80211_ATTR_MPATH_NEXT_HOP, NL80211_ATTR_MPATH_INFO, + NL80211_ATTR_BSS_CTS_PROT, + NL80211_ATTR_BSS_SHORT_PREAMBLE, + NL80211_ATTR_BSS_SHORT_SLOT_TIME, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index e00750836ba5..7afef14d5c5b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -268,6 +268,23 @@ struct mpath_info { u8 flags; }; +/** + * struct bss_parameters - BSS parameters + * + * Used to change BSS parameters (mainly for AP mode). + * + * @use_cts_prot: Whether to use CTS protection + * (0 = no, 1 = yes, -1 = do not change) + * @use_short_preamble: Whether the use of short preambles is allowed + * (0 = no, 1 = yes, -1 = do not change) + * @use_short_slot_time: Whether the use of short slot time is allowed + * (0 = no, 1 = yes, -1 = do not change) + */ +struct bss_parameters { + int use_cts_prot; + int use_short_preamble; + int use_short_slot_time; +}; /* from net/wireless.h */ struct wiphy; @@ -318,6 +335,8 @@ struct wiphy; * @change_station: Modify a given station. * * @set_mesh_cfg: set mesh parameters (by now, just mesh id) + * + * @change_bss: Modify parameters for a given BSS. */ struct cfg80211_ops { int (*add_virtual_intf)(struct wiphy *wiphy, char *name, @@ -370,6 +389,9 @@ struct cfg80211_ops { int (*dump_mpath)(struct wiphy *wiphy, struct net_device *dev, int idx, u8 *dst, u8 *next_hop, struct mpath_info *pinfo); + + int (*change_bss)(struct wiphy *wiphy, struct net_device *dev, + struct bss_parameters *params); }; #endif /* __NET_CFG80211_H */ diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 0fdc3dabc964..7c399a9c11da 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -158,12 +158,14 @@ struct ieee80211_low_level_stats { * also implies a change in the AID. * @BSS_CHANGED_ERP_CTS_PROT: CTS protection changed * @BSS_CHANGED_ERP_PREAMBLE: preamble changed + * @BSS_CHANGED_ERP_SLOT: slot timing changed * @BSS_CHANGED_HT: 802.11n parameters changed */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, BSS_CHANGED_ERP_CTS_PROT = 1<<1, BSS_CHANGED_ERP_PREAMBLE = 1<<2, + BSS_CHANGED_ERP_SLOT = 1<<3, BSS_CHANGED_HT = 1<<4, }; @@ -177,6 +179,7 @@ enum ieee80211_bss_change { * @aid: association ID number, valid only when @assoc is true * @use_cts_prot: use CTS protection * @use_short_preamble: use 802.11b short preamble + * @use_short_slot: use short slot time (only relevant for ERP) * @dtim_period: num of beacons before the next DTIM, for PSM * @timestamp: beacon timestamp * @beacon_int: beacon interval @@ -192,6 +195,7 @@ struct ieee80211_bss_conf { /* erp related data */ bool use_cts_prot; bool use_short_preamble; + bool use_short_slot; u8 dtim_period; u16 beacon_int; u16 assoc_capability; @@ -420,6 +424,11 @@ struct ieee80211_rx_status { * @IEEE80211_CONF_PS: Enable 802.11 power save mode */ enum ieee80211_conf_flags { + /* + * TODO: IEEE80211_CONF_SHORT_SLOT_TIME will be removed once drivers + * have been converted to use bss_info_changed() for slot time + * configuration + */ IEEE80211_CONF_SHORT_SLOT_TIME = (1<<0), IEEE80211_CONF_RADIOTAP = (1<<1), IEEE80211_CONF_SUPPORT_HT_MODE = (1<<2), -- cgit v1.2.2 From 18d7c65ba6628d2759bd650e7039d6307f2c99e9 Mon Sep 17 00:00:00 2001 From: Sujith Date: Thu, 14 Aug 2008 13:27:41 +0530 Subject: mac80211: Add an 802.11n definition This patch adds a HT Capability (DSSS/CCK Mode in 40MHz BSS) definition to ieee80211.h Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 7f4df7c7659d..be456450cd2e 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -714,6 +714,7 @@ struct ieee80211_ht_addt_info { #define IEEE80211_HT_CAP_SGI_40 0x0040 #define IEEE80211_HT_CAP_DELAY_BA 0x0400 #define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 +#define IEEE80211_HT_CAP_DSSSCCK40 0x1000 /* 802.11n HT capability AMPDU settings */ #define IEEE80211_HT_CAP_AMPDU_FACTOR 0x03 #define IEEE80211_HT_CAP_AMPDU_DENSITY 0x1C -- cgit v1.2.2 From 095f695cbb07281682462da0618fffabb499d0be Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Tue, 19 Aug 2008 12:50:31 -0500 Subject: ssb: Update for Rev. 5 SPROM Although a revision 5 SPROM has not been seen in the wild, the open-source portion of the MIPS driver 4.150.10.5 describes its layout, which is mostly inherited from revision 4. This patch implements the differences. Signed-off-by: Larry Finger Acked-by: Michael Buesch Signed-off-by: John W. Linville --- include/linux/ssb/ssb_regs.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include') diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index ebad0bac9801..271bb4b6446e 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -316,6 +316,21 @@ #define SSB_SPROM4_PA1B1 0x1090 #define SSB_SPROM4_PA1B2 0x1092 +/* SPROM Revision 5 (inherits most data from rev 4) */ +#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */ +#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */ +#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */ +#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */ +#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */ +#define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ +#define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */ +#define SSB_SPROM5_GPIOA_P1_SHIFT 8 +#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */ +#define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */ +#define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */ +#define SSB_SPROM5_GPIOB_P3_SHIFT 8 + + /* Values for SSB_SPROM1_BINF_CCODE */ enum { SSB_SPROM1CCODE_WORLD = 0, -- cgit v1.2.2 From 31ce12fb3ebf88b054deb99ad729e84888bf6125 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 20 Aug 2008 17:45:06 -0500 Subject: ssb: Clean up extraction of MAC addresses from SPROM Only rev 1 and 2 ssb SPROMs have fields named et0mac and et1mac; however, all of the extraction routines extract pseudo data for these fields from regions that are all 1's resulting in a hardware address of FF:FF:FF:FF:FF:FF. This patch forces such a fill at the beginning of the data extraction process, and only does the formal extraction if the SPROM rev is 1 or 2. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- include/linux/ssb/ssb_regs.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include') diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index 271bb4b6446e..99a0f991e850 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -245,8 +245,6 @@ /* SPROM Revision 3 (inherits most data from rev 2) */ #define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */ -#define SSB_SPROM3_ET0MAC 0x1050 /* 6 bytes MAC address for Ethernet ?? */ -#define SSB_SPROM3_ET1MAC 0x1050 /* 6 bytes MAC address for 802.11a ?? */ #define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ #define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ #define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ @@ -267,8 +265,6 @@ /* SPROM Revision 4 */ #define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */ -#define SSB_SPROM4_ET0MAC 0x1018 /* 6 bytes MAC address for Ethernet ?? */ -#define SSB_SPROM4_ET1MAC 0x1018 /* 6 bytes MAC address for 802.11a ?? */ #define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */ #define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ #define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ -- cgit v1.2.2 From 36aedc903ea11a4188de0a118d26c9f20afdd272 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 25 Aug 2008 11:58:58 +0300 Subject: mac80211/cfg80211: HT capabilities for NEW_STA Allow userspace (e.g., hostapd) to set HT capabilities for associated STAs. This is based on a patch from Zhu Yi (only the NL80211_ATTR_HT_CAPABILITY for NEW_STA part is included here). Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/linux/nl80211.h | 12 ++++++++++++ include/net/cfg80211.h | 1 + 2 files changed, 13 insertions(+) (limited to 'include') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 447c02a5190e..0c1147de3ec7 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -207,6 +207,9 @@ enum nl80211_commands { * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled * (u8, 0 or 1) * + * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION) + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -254,16 +257,25 @@ enum nl80211_attrs { NL80211_ATTR_BSS_SHORT_PREAMBLE, NL80211_ATTR_BSS_SHORT_SLOT_TIME, + NL80211_ATTR_HT_CAPABILITY, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 }; +/* + * Allow user space programs to use #ifdef on new attributes by defining them + * here + */ +#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY + #define NL80211_MAX_SUPP_RATES 32 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 +#define NL80211_HT_CAPABILITY_LEN 26 /** * enum nl80211_iftype - (virtual) interface types diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 7afef14d5c5b..0a72d1e3d3ab 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -152,6 +152,7 @@ struct station_parameters { u16 aid; u8 supported_rates_len; u8 plink_action; + struct ieee80211_ht_cap *ht_capa; }; /** -- cgit v1.2.2