From 16f6b87ac524f073c93ea3caadfd5111d03ecb4f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Sun, 12 Jan 2014 20:02:20 +0100 Subject: can: add explicit copyrights to can userspace header MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is in the spirit of commit 2485602f1af2 (can: add explicit copyrights to can headers). It seems I have missed can.h back then. Signed-off-by: Uwe Kleine-König Acked-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- include/uapi/linux/can.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/can.h b/include/uapi/linux/can.h index e52958d7c2d1..5d9d1d140718 100644 --- a/include/uapi/linux/can.h +++ b/include/uapi/linux/can.h @@ -8,6 +8,38 @@ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research * All rights reserved. * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of Volkswagen nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Alternatively, provided that this notice is retained in full, this + * software may be distributed under the terms of the GNU General + * Public License ("GPL") version 2, in which case the provisions of the + * GPL apply INSTEAD OF those given above. + * + * The provided data structures and external interfaces from this code + * are not restricted to be used by modules with a GPL compatible license. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. */ #ifndef CAN_H -- cgit v1.2.2 From 1df4a51082df6e5b0b8eb70df81885b9b4c9e6ec Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Wed, 15 Jan 2014 00:00:47 +0200 Subject: cfg80211: Allow BSS hint to be provided for connect This clarifies the expected driver behavior on the older NL80211_ATTR_MAC and NL80211_ATTR_WIPHY_FREQ attributes and adds a new set of similar attributes with _HINT postfix to enable use of a recommendation of the initial BSS to choose. This can be helpful for some drivers that can avoid an additional full scan on connection request if the information is provided to them (user space tools like wpa_supplicant already has that information available based on earlier scans). In addition, this can be used to get more expected behavior for cases where a specific BSS should be picked first based on operations like Interworking network selection or WPS. These cases were already easily addressed with drivers that leave BSS selection to user space, but there was no convenient way to do this with drivers that take care of BSS selection internally without using the NL80211_ATTR_MAC which is not really desired since it is needed for other purposes to force the association to remain with the same BSS. Signed-off-by: Jouni Malinen [add const, fix policy] Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 91054fd660e0..e57de3318068 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -418,8 +418,18 @@ * %NL80211_ATTR_SSID attribute, and can optionally specify the association * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, - * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and - * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. + * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and + * %NL80211_ATTR_WIPHY_FREQ_HINT. + * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are + * restrictions on BSS selection, i.e., they effectively prevent roaming + * within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT + * can be included to provide a recommendation of the initial BSS while + * allowing the driver to roam to other BSSes within the ESS and also to + * ignore this recommendation if the indicated BSS is not ideal. Only one + * set of BSSID,frequency parameters is used (i.e., either the enforcing + * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict + * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). * Background scan period can optionally be * specified in %NL80211_ATTR_BG_SCAN_PERIOD, * if not specified default background scan configuration @@ -1555,6 +1565,9 @@ enum nl80211_commands { * data is in the format defined for the payload of the QoS Map Set element * in IEEE Std 802.11-2012, 8.4.2.97. * + * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS + * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1883,6 +1896,9 @@ enum nl80211_attrs { NL80211_ATTR_QOS_MAP, + NL80211_ATTR_MAC_HINT, + NL80211_ATTR_WIPHY_FREQ_HINT, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.2 From b43504cf75b8b8773ee70c90bcd691282e151b9a Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Wed, 15 Jan 2014 00:01:08 +0200 Subject: cfg80211: Advertise maximum associated STAs in AP mode This allows drivers to advertise the maximum number of associated stations they support in AP mode (including P2P GO). User space applications can use this for cleaner way of handling the limit (e.g., hostapd rejecting IEEE 802.11 authentication without manual configuration of the limit) or to figure out what type of use cases can be executed with multiple devices before trying and failing. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index e57de3318068..9a86c8bf6da6 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1568,6 +1568,13 @@ enum nl80211_commands { * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS * + * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many + * associated stations are supported in AP mode (including P2P GO); u32. + * Since drivers may not have a fixed limit on the maximum number (e.g., + * other concurrent operations may affect this), drivers are allowed to + * advertise values that cannot always be met. In such cases, an attempt + * to add a new station entry with @NL80211_CMD_NEW_STATION may fail. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1899,6 +1906,8 @@ enum nl80211_attrs { NL80211_ATTR_MAC_HINT, NL80211_ATTR_WIPHY_FREQ_HINT, + NL80211_ATTR_MAX_AP_ASSOC_STA, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.2 From 0b9323f600a3e80a488e3bd14ddfa85b294e630d Mon Sep 17 00:00:00 2001 From: Janusz Dziedzic Date: Wed, 8 Jan 2014 08:46:02 +0100 Subject: nl80211: add Guard Interval support for set_bitrate_mask Allow to force SGI, LGI. Mainly for test purpose. Signed-off-by: Janusz Dziedzic Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 9a86c8bf6da6..53e56cf7c0fe 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3156,6 +3156,7 @@ enum nl80211_key_attributes { * in an array of MCS numbers. * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection, * see &struct nl80211_txrate_vht + * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi * @__NL80211_TXRATE_AFTER_LAST: internal * @NL80211_TXRATE_MAX: highest TX rate attribute */ @@ -3164,6 +3165,7 @@ enum nl80211_tx_rate_attributes { NL80211_TXRATE_LEGACY, NL80211_TXRATE_HT, NL80211_TXRATE_VHT, + NL80211_TXRATE_GI, /* keep last */ __NL80211_TXRATE_AFTER_LAST, @@ -3181,6 +3183,12 @@ struct nl80211_txrate_vht { __u16 mcs[NL80211_VHT_NSS_MAX]; }; +enum nl80211_txrate_gi { + NL80211_TXRATE_DEFAULT_GI, + NL80211_TXRATE_FORCE_SGI, + NL80211_TXRATE_FORCE_LGI, +}; + /** * enum nl80211_band - Frequency band * @NL80211_BAND_2GHZ: 2.4 GHz ISM band -- cgit v1.2.2 From ea73cbce4e1fd93113301532ad98041b119bc85a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 24 Jan 2014 10:53:53 +0100 Subject: nl80211: fix scheduled scan RSSI matchset attribute confusion The scheduled scan matchsets were intended to be a list of filters, with the found BSS having to pass at least one of them to be passed to the host. When the RSSI attribute was added, however, this was broken and currently wpa_supplicant adds that attribute in its own matchset; however, it doesn't intend that to mean that anything that passes the RSSI filter should be passed to the host, instead it wants it to mean that everything needs to also have higher RSSI. This is semantically problematic because we have a list of filters like [ SSID1, SSID2, SSID3, RSSI ] with no real indication which one should be OR'ed and which one AND'ed. To fix this, move the RSSI filter attribute into each matchset. As we need to stay backward compatible, treat a matchset with only the RSSI attribute as a "default RSSI filter" for all other matchsets, but only if there are other matchsets (an RSSI-only matchset by itself is still desirable.) To make driver implementation easier, keep a global min_rssi_thold for the entire request as well. The only affected driver is ath6kl. I found this when I looked into the code after Raja Mani submitted a patch fixing the n_match_sets calculation to disregard the RSSI, but that patch didn't address the semantic issue. Reported-by: Raja Mani Acked-by: Luciano Coelho Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 53e56cf7c0fe..474ce32e0797 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2467,9 +2467,15 @@ enum nl80211_reg_rule_attr { * enum nl80211_sched_scan_match_attr - scheduled scan match attributes * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, - * only report BSS with matching SSID. + * only report BSS with matching SSID. * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a - * BSS in scan results. Filtering is turned off if not specified. + * BSS in scan results. Filtering is turned off if not specified. Note that + * if this attribute is in a match set of its own, then it is treated as + * the default value for all matchsets with an SSID, rather than being a + * matchset of its own without an RSSI filter. This is due to problems with + * how this API was implemented in the past. Also, due to the same problem, + * the only way to create a matchset with only an RSSI filter (with this + * attribute) is if there's only a single matchset with the RSSI attribute. * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter * attribute number currently defined * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use -- cgit v1.2.2 From 9752482083066af7ac18a5ca376ff35d72418b29 Mon Sep 17 00:00:00 2001 From: Janusz Dziedzic Date: Thu, 30 Jan 2014 09:52:20 +0100 Subject: cfg80211: regulatory introduce maximum bandwidth calculation In case we will get regulatory request with rule where max_bandwidth_khz is set to 0 handle this case as a special one. If max_bandwidth_khz == 0 we should calculate maximum available bandwidth base on all frequency contiguous rules. In case we need auto calculation we just have to set: country PL: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ AUTO), (N/A, 20) (5250 - 5330 @ AUTO), (N/A, 20), DFS (5490 - 5710 @ 80), (N/A, 27), DFS This mean we will calculate maximum bw for rules where AUTO (N/A) were set, 160MHz (5330 - 5170) in example above. So we will get: (5170 - 5250 @ 160), (N/A, 20) (5250 - 5330 @ 160), (N/A, 20), DFS In other case: country FR: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ AUTO), (N/A, 20) (5250 - 5330 @ 80), (N/A, 20), DFS (5490 - 5710 @ 80), (N/A, 27), DFS We will get 80MHz (5250 - 5170): (5170 - 5250 @ 80), (N/A, 20) (5250 - 5330 @ 80), (N/A, 20), DFS Base on this calculations we will set correct channel bandwidth flags (eg. IEEE80211_CHAN_NO_80MHZ). We don't need any changes in CRDA or internal regulatory. Signed-off-by: Janusz Dziedzic [extend nl80211 description a bit, fix typo] Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 474ce32e0797..a12e6cae5132 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2437,7 +2437,10 @@ enum nl80211_reg_type { * in KHz. This is not a center a frequency but an actual regulatory * band edge. * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this - * frequency range, in KHz. + * frequency range, in KHz. If not present or 0, maximum available + * bandwidth should be calculated base on contiguous rules and wider + * channels will be allowed to cross multiple contiguous/overlapping + * frequency ranges. * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain * for a given frequency range. The value is in mBi (100 * dBi). * If you don't have one then don't send this. -- cgit v1.2.2 From e7aceef4ac3180bd93d4c0d3fe23775850b6c31d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 12 Feb 2014 14:21:15 +0100 Subject: cfg80211: remove NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL There's no driver using this flag and consequently no userspace application is actually looking at it. As it seems unlikely for any driver to start using it, remove it and the (very little) code that used it. Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index a12e6cae5132..ba1f7625625c 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3843,11 +3843,6 @@ enum nl80211_ap_sme_features { * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested * to work properly to suppport receiving regulatory hints from * cellular base stations. - * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active - * P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel - * in the interface combinations, even when it's only used for scan - * and remain-on-channel. This could be due to, for example, the - * remain-on-channel implementation requiring a channel context. * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station * mode @@ -3889,7 +3884,7 @@ enum nl80211_feature_flags { NL80211_FEATURE_HT_IBSS = 1 << 1, NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, - NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, + /* bit 4 is reserved - don't use */ NL80211_FEATURE_SAE = 1 << 5, NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6, NL80211_FEATURE_SCAN_FLUSH = 1 << 7, -- cgit v1.2.2 From bf8fc60a62db3fa99d2ded50e68bf3e5be027ebe Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 12 Feb 2014 22:13:57 +0000 Subject: ethtool: Expand documentation of struct ethtool_cmd struct ethtool_cmd has very limited documentation; it contains several obscure or obsolete fields and several with non-obvious interpretation. Replace the inline comments (and some others below) with a full explanation of the semantics as well as I understand them, in kernel-doc format. Formally deprecate some fields that seem to be of historical use only. Extend the comment about 32/64-bit compatibility to cover all ethtool structures. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 124 +++++++++++++++++++++++++++++++------------ 1 file changed, 90 insertions(+), 34 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 38dbafaa5341..c4d5eb2bfac5 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -16,37 +16,97 @@ #include #include -/* This should work for both 32 and 64 bit userland. */ +/* All structures exposed to userland should be defined such that they + * have the same layout for 32-bit and 64-bit userland. + */ + +/** + * struct ethtool_cmd - link control and status + * @cmd: Command number = %ETHTOOL_GSET or %ETHTOOL_SSET + * @supported: Bitmask of %SUPPORTED_* flags for the link modes, + * physical connectors and other link features for which the + * interface supports autonegotiation or auto-detection. + * Read-only. + * @advertising: Bitmask of %ADVERTISED_* flags for the link modes, + * physical connectors and other link features that are + * advertised through autonegotiation or enabled for + * auto-detection. + * @speed: Low bits of the speed + * @duplex: Duplex mode; one of %DUPLEX_* + * @port: Physical connector type; one of %PORT_* + * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not + * applicable. For clause 45 PHYs this is the PRTAD. + * @transceiver: Historically used to distinguish different possible + * PHY types, but not in a consistent way. Deprecated. + * @autoneg: Enable/disable autonegotiation and auto-detection; + * either %AUTONEG_DISABLE or %AUTONEG_ENABLE + * @mdio_support: Bitmask of %ETH_MDIO_SUPPORTS_* flags for the MDIO + * protocols supported by the interface; 0 if unknown. + * Read-only. + * @maxtxpkt: Historically used to report TX IRQ coalescing; now + * obsoleted by &struct ethtool_coalesce. Read-only; deprecated. + * @maxrxpkt: Historically used to report RX IRQ coalescing; now + * obsoleted by &struct ethtool_coalesce. Read-only; deprecated. + * @speed_hi: High bits of the speed + * @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of + * %ETH_TP_MDI_*. If the status is unknown or not applicable, the + * value will be %ETH_TP_MDI_INVALID. Read-only. + * @eth_tp_mdix_ctrl: Ethernet twisted pair MDI(-X) control; one of + * %ETH_TP_MDI_*. If MDI(-X) control is not implemented, reads + * yield %ETH_TP_MDI_INVALID and writes may be ignored or rejected. + * When written successfully, the link should be renegotiated if + * necessary. + * @lp_advertising: Bitmask of %ADVERTISED_* flags for the link modes + * and other link features that the link partner advertised + * through autonegotiation; 0 if unknown or not applicable. + * Read-only. + * + * The link speed in Mbps is split between @speed and @speed_hi. Use + * the ethtool_cmd_speed() and ethtool_cmd_speed_set() functions to + * access it. + * + * If autonegotiation is disabled, the speed and @duplex represent the + * fixed link mode and are writable if the driver supports multiple + * link modes. If it is enabled then they are read-only; if the link + * is up they represent the negotiated link mode; if the link is down, + * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and + * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode. + * + * Some hardware interfaces may have multiple PHYs and/or physical + * connectors fitted or do not allow the driver to detect which are + * fitted. For these interfaces @port and/or @phy_address may be + * writable, possibly dependent on @autoneg being %AUTONEG_DISABLE. + * Otherwise, attempts to write different values may be ignored or + * rejected. + * + * Users should assume that all fields not marked read-only are + * writable and subject to validation by the driver. They should use + * %ETHTOOL_GSET to get the current values before making specific + * changes and then applying them with %ETHTOOL_SSET. + * + * Drivers that implement set_settings() should validate all fields + * other than @cmd that are not described as read-only or deprecated, + * and must ignore all fields described as read-only. + * + * Deprecated fields should be ignored by both users and drivers. + */ struct ethtool_cmd { __u32 cmd; - __u32 supported; /* Features this interface supports */ - __u32 advertising; /* Features this interface advertises */ - __u16 speed; /* The forced speed (lower bits) in - * Mbps. Please use - * ethtool_cmd_speed()/_set() to - * access it */ - __u8 duplex; /* Duplex, half or full */ - __u8 port; /* Which connector port */ - __u8 phy_address; /* MDIO PHY address (PRTAD for clause 45). - * May be read-only or read-write - * depending on the driver. - */ - __u8 transceiver; /* Which transceiver to use */ - __u8 autoneg; /* Enable or disable autonegotiation */ - __u8 mdio_support; /* MDIO protocols supported. Read-only. - * Not set by all drivers. - */ - __u32 maxtxpkt; /* Tx pkts before generating tx int */ - __u32 maxrxpkt; /* Rx pkts before generating rx int */ - __u16 speed_hi; /* The forced speed (upper - * bits) in Mbps. Please use - * ethtool_cmd_speed()/_set() to - * access it */ - __u8 eth_tp_mdix; /* twisted pair MDI-X status */ - __u8 eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set, - * link should be renegotiated if necessary - */ - __u32 lp_advertising; /* Features the link partner advertises */ + __u32 supported; + __u32 advertising; + __u16 speed; + __u8 duplex; + __u8 port; + __u8 phy_address; + __u8 transceiver; + __u8 autoneg; + __u8 mdio_support; + __u32 maxtxpkt; + __u32 maxrxpkt; + __u16 speed_hi; + __u8 eth_tp_mdix; + __u8 eth_tp_mdix_ctrl; + __u32 lp_advertising; __u32 reserved[2]; }; @@ -905,7 +965,6 @@ enum ethtool_sfeatures_retval_bits { #define SPARC_ETH_GSET ETHTOOL_GSET #define SPARC_ETH_SSET ETHTOOL_SSET -/* Indicates what features are supported by the interface. */ #define SUPPORTED_10baseT_Half (1 << 0) #define SUPPORTED_10baseT_Full (1 << 1) #define SUPPORTED_100baseT_Half (1 << 2) @@ -934,7 +993,6 @@ enum ethtool_sfeatures_retval_bits { #define SUPPORTED_40000baseSR4_Full (1 << 25) #define SUPPORTED_40000baseLR4_Full (1 << 26) -/* Indicates what features are advertised by the interface. */ #define ADVERTISED_10baseT_Half (1 << 0) #define ADVERTISED_10baseT_Full (1 << 1) #define ADVERTISED_100baseT_Half (1 << 2) @@ -999,9 +1057,7 @@ enum ethtool_sfeatures_retval_bits { #define XCVR_DUMMY2 0x03 #define XCVR_DUMMY3 0x04 -/* Enable or disable autonegotiation. If this is set to enable, - * the forced link modes above are completely ignored. - */ +/* Enable or disable autonegotiation. */ #define AUTONEG_DISABLE 0x00 #define AUTONEG_ENABLE 0x01 -- cgit v1.2.2 From daba1b6bc1cb89c462bdd444c29c023dda3459e6 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 12 Feb 2014 22:14:03 +0000 Subject: ethtool: Expand documentation of struct ethtool_drvinfo Replace the inline comments (and some others below) with a full explanation of the semantics, in kernel-doc format. Specify which strings may be empty. Document the relationship with other commands. Replace the 'deprecation' of some fields with a proper explanation of the conversion to generalised string sets, as userland programs may not be able to assume that ETHTOOL_GSSET_INFO is available. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 56 ++++++++++++++++++++++++++++++-------------- 1 file changed, 39 insertions(+), 17 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index c4d5eb2bfac5..cc523cb53b07 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -139,28 +139,50 @@ static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep) #define ETHTOOL_FWVERS_LEN 32 #define ETHTOOL_BUSINFO_LEN 32 -/* these strings are set to whatever the driver author decides... */ + +/** + * struct ethtool_drvinfo - general driver and device information + * @cmd: Command number = %ETHTOOL_GDRVINFO + * @driver: Driver short name. This should normally match the name + * in its bus driver structure (e.g. pci_driver::name). Must + * not be an empty string. + * @version: Driver version string; may be an empty string + * @fw_version: Firmware version string; may be an empty string + * @bus_info: Device bus address. This should match the dev_name() + * string for the underlying bus device, if there is one. May be + * an empty string. + * @n_priv_flags: Number of flags valid for %ETHTOOL_GPFLAGS and + * %ETHTOOL_SPFLAGS commands; also the number of strings in the + * %ETH_SS_PRIV_FLAGS set + * @n_stats: Number of u64 statistics returned by the %ETHTOOL_GSTATS + * command; also the number of strings in the %ETH_SS_STATS set + * @testinfo_len: Number of results returned by the %ETHTOOL_TEST + * command; also the number of strings in the %ETH_SS_TEST set + * @eedump_len: Size of EEPROM accessible through the %ETHTOOL_GEEPROM + * and %ETHTOOL_SEEPROM commands, in bytes + * @regdump_len: Size of register dump returned by the %ETHTOOL_GREGS + * command, in bytes + * + * Users can use the %ETHTOOL_GSSET_INFO command to get the number of + * strings in any string set (from Linux 2.6.34). + * + * Drivers should set at most @driver, @version, @fw_version and + * @bus_info in their get_drvinfo() implementation. The ethtool + * core fills in the other fields using other driver operations. + */ struct ethtool_drvinfo { __u32 cmd; - char driver[32]; /* driver short name, "tulip", "eepro100" */ - char version[32]; /* driver version string */ - char fw_version[ETHTOOL_FWVERS_LEN]; /* firmware version string */ - char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */ - /* For PCI devices, use pci_name(pci_dev). */ + char driver[32]; + char version[32]; + char fw_version[ETHTOOL_FWVERS_LEN]; + char bus_info[ETHTOOL_BUSINFO_LEN]; char reserved1[32]; char reserved2[12]; - /* - * Some struct members below are filled in - * using ops->get_sset_count(). Obtaining - * this info from ethtool_drvinfo is now - * deprecated; Use ETHTOOL_GSSET_INFO - * instead. - */ - __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */ - __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */ + __u32 n_priv_flags; + __u32 n_stats; __u32 testinfo_len; - __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */ - __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */ + __u32 eedump_len; + __u32 regdump_len; }; #define SOPASS_MAX 6 -- cgit v1.2.2 From 02d59f3fdb6a5d77a12549482811d404842e2c95 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 12 Feb 2014 22:14:07 +0000 Subject: ethtool: Expand documentation of struct ethtool_wol Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index cc523cb53b07..15a42de87fec 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -186,12 +186,21 @@ struct ethtool_drvinfo { }; #define SOPASS_MAX 6 -/* wake-on-lan settings */ + +/** + * struct ethtool_wolinfo - Wake-On-Lan configuration + * @cmd: Command number = %ETHTOOL_GWOL or %ETHTOOL_SWOL + * @supported: Bitmask of %WAKE_* flags for supported Wake-On-Lan modes. + * Read-only. + * @wolopts: Bitmask of %WAKE_* flags for enabled Wake-On-Lan modes. + * @sopass: SecureOn(tm) password; meaningful only if %WAKE_MAGICSECURE + * is set in @wolopts. + */ struct ethtool_wolinfo { __u32 cmd; __u32 supported; __u32 wolopts; - __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */ + __u8 sopass[SOPASS_MAX]; }; /* for passing single values */ -- cgit v1.2.2 From 09fb8bb068c86ff6b79dd7d4cb8f706bedf86d73 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 12 Feb 2014 22:14:13 +0000 Subject: ethtool: Expand documentation of struct ethtool_regs Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 15a42de87fec..441bd316b850 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -209,11 +209,25 @@ struct ethtool_value { __u32 data; }; -/* for passing big chunks of data */ +/** + * struct ethtool_regs - hardware register dump + * @cmd: Command number = %ETHTOOL_GREGS + * @version: Dump format version. This is driver-specific and may + * distinguish different chips/revisions. Drivers must use new + * version numbers whenever the dump format changes in an + * incompatible way. + * @len: On entry, the real length of @data. On return, the number of + * bytes used. + * @data: Buffer for the register dump + * + * Users should use %ETHTOOL_GDRVINFO to find the maximum length of + * a register dump for the interface. They must allocate the buffer + * immediately following this structure. + */ struct ethtool_regs { __u32 cmd; - __u32 version; /* driver-specific, indicates different chips/revs */ - __u32 len; /* bytes */ + __u32 version; + __u32 len; __u8 data[0]; }; -- cgit v1.2.2 From c8364a63f6483db0826ccec6e485c1646522faf1 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 12 Feb 2014 22:14:17 +0000 Subject: ethtool: Expand documentation of struct ethtool_eeprom Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 441bd316b850..d5a0d20a9ff0 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -231,12 +231,29 @@ struct ethtool_regs { __u8 data[0]; }; -/* for passing EEPROM chunks */ +/** + * struct ethtool_eeprom - EEPROM dump + * @cmd: Command number = %ETHTOOL_GEEPROM, %ETHTOOL_GMODULEEEPROM or + * %ETHTOOL_SEEPROM + * @magic: A 'magic cookie' value to guard against accidental changes. + * The value passed in to %ETHTOOL_SEEPROM must match the value + * returned by %ETHTOOL_GEEPROM for the same device. This is + * unused when @cmd is %ETHTOOL_GMODULEEEPROM. + * @offset: Offset within the EEPROM to begin reading/writing, in bytes + * @len: On entry, number of bytes to read/write. On successful + * return, number of bytes actually read/written. In case of + * error, this may indicate at what point the error occurred. + * @data: Buffer to read/write from + * + * Users may use %ETHTOOL_GDRVINFO or %ETHTOOL_GMODULEINFO to find + * the length of an on-board or module EEPROM, respectively. They + * must allocate the buffer immediately following this structure. + */ struct ethtool_eeprom { __u32 cmd; __u32 magic; - __u32 offset; /* in bytes */ - __u32 len; /* in bytes */ + __u32 offset; + __u32 len; __u8 data[0]; }; -- cgit v1.2.2 From af440a8aed3d88a39f26b13de26b30c36189d994 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 12 Feb 2014 22:14:23 +0000 Subject: ethtool: Expand documentation of struct ethtool_ringparam Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 37 ++++++++++++++++++++++++++----------- 1 file changed, 26 insertions(+), 11 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index d5a0d20a9ff0..e602cd05cef1 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -401,22 +401,37 @@ struct ethtool_coalesce { __u32 rate_sample_interval; }; -/* for configuring RX/TX ring parameters */ +/** + * struct ethtool_ringparam - RX/TX ring parameters + * @cmd: Command number = %ETHTOOL_GRINGPARAM or %ETHTOOL_SRINGPARAM + * @rx_max_pending: Maximum supported number of pending entries per + * RX ring. Read-only. + * @rx_mini_max_pending: Maximum supported number of pending entries + * per RX mini ring. Read-only. + * @rx_jumbo_max_pending: Maximum supported number of pending entries + * per RX jumbo ring. Read-only. + * @tx_max_pending: Maximum supported number of pending entries per + * TX ring. Read-only. + * @rx_pending: Current maximum number of pending entries per RX ring + * @rx_mini_pending: Current maximum number of pending entries per RX + * mini ring + * @rx_jumbo_pending: Current maximum number of pending entries per RX + * jumbo ring + * @tx_pending: Current maximum supported number of pending entries + * per TX ring + * + * If the interface does not have separate RX mini and/or jumbo rings, + * @rx_mini_max_pending and/or @rx_jumbo_max_pending will be 0. + * + * There may also be driver-dependent minimum values for the number + * of entries per ring. + */ struct ethtool_ringparam { - __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */ - - /* Read only attributes. These indicate the maximum number - * of pending RX/TX ring entries the driver will allow the - * user to set. - */ + __u32 cmd; __u32 rx_max_pending; __u32 rx_mini_max_pending; __u32 rx_jumbo_max_pending; __u32 tx_max_pending; - - /* Values changeable by the user. The valid values are - * in the range 1 to the "*_max_pending" counterpart above. - */ __u32 rx_pending; __u32 rx_mini_pending; __u32 rx_jumbo_pending; -- cgit v1.2.2 From 6a7a1081cebacc454588a0ba448eda6bd498e709 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 12 Feb 2014 22:14:28 +0000 Subject: ethtool: Update documentation of struct ethtool_pauseparam Convert the inline comments to kernel-doc format. Explicitly specify that non-zero autoneg is an error if link autonegotiation is disabled. Specify that pause capabilities should be advertised dependent on link autonegotiation, not the autoneg flag here. There is no way to opt-out of pause frame autonegotiation, and this improves behaviour when the link partner is configured to follow pause frame autonegotiation and our interface is not. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 36 +++++++++++++++++++++++------------- 1 file changed, 23 insertions(+), 13 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index e602cd05cef1..8ca2924a2cbf 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -466,20 +466,30 @@ struct ethtool_channels { __u32 combined_count; }; -/* for configuring link flow control parameters */ +/** + * struct ethtool_pauseparam - Ethernet pause (flow control) parameters + * @cmd: Command number = %ETHTOOL_GPAUSEPARAM or %ETHTOOL_SPAUSEPARAM + * @autoneg: Flag to enable autonegotiation of pause frame use + * @rx_pause: Flag to enable reception of pause frames + * @tx_pause: Flag to enable transmission of pause frames + * + * Drivers should reject a non-zero setting of @autoneg when + * autoneogotiation is disabled (or not supported) for the link. + * + * If the link is autonegotiated, drivers should use + * mii_advertise_flowctrl() or similar code to set the advertised + * pause frame capabilities based on the @rx_pause and @tx_pause flags, + * even if @autoneg is zero. They should also allow the advertised + * pause frame capabilities to be controlled directly through the + * advertising field of &struct ethtool_cmd. + * + * If @autoneg is non-zero, the MAC is configured to send and/or + * receive pause frames according to the result of autonegotiation. + * Otherwise, it is configured directly based on the @rx_pause and + * @tx_pause flags. + */ struct ethtool_pauseparam { - __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ - - /* If the link is being auto-negotiated (via ethtool_cmd.autoneg - * being true) the user may set 'autoneg' here non-zero to have the - * pause parameters be auto-negotiated too. In such a case, the - * {rx,tx}_pause values below determine what capabilities are - * advertised. - * - * If 'autoneg' is zero or the link is not being auto-negotiated, - * then {rx,tx}_pause force the driver to use/not-use pause - * flow control. - */ + __u32 cmd; __u32 autoneg; __u32 rx_pause; __u32 tx_pause; -- cgit v1.2.2 From fe5df1b91ec35fb80159874670e6bc81c8851c04 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 12 Feb 2014 22:14:33 +0000 Subject: ethtool: Expand documentation of string set types Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 59 +++++++++++++++++++++++++++++++++++--------- 1 file changed, 47 insertions(+), 12 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 8ca2924a2cbf..e726340d1f8e 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -496,31 +496,66 @@ struct ethtool_pauseparam { }; #define ETH_GSTRING_LEN 32 + +/** + * enum ethtool_stringset - string set ID + * @ETH_SS_TEST: Self-test result names, for use with %ETHTOOL_TEST + * @ETH_SS_STATS: Statistic names, for use with %ETHTOOL_GSTATS + * @ETH_SS_PRIV_FLAGS: Driver private flag names, for use with + * %ETHTOOL_GPFLAGS and %ETHTOOL_SPFLAGS + * @ETH_SS_NTUPLE_FILTERS: Previously used with %ETHTOOL_GRXNTUPLE; + * now deprecated + * @ETH_SS_FEATURES: Device feature names + */ enum ethtool_stringset { ETH_SS_TEST = 0, ETH_SS_STATS, ETH_SS_PRIV_FLAGS, - ETH_SS_NTUPLE_FILTERS, /* Do not use, GRXNTUPLE is now deprecated */ + ETH_SS_NTUPLE_FILTERS, ETH_SS_FEATURES, }; -/* for passing string sets for data tagging */ +/** + * struct ethtool_gstrings - string set for data tagging + * @cmd: Command number = %ETHTOOL_GSTRINGS + * @string_set: String set ID; one of &enum ethtool_stringset + * @len: On return, the number of strings in the string set + * @data: Buffer for strings. Each string is null-padded to a size of + * %ETH_GSTRING_LEN. + * + * Users must use %ETHTOOL_GSSET_INFO to find the number of strings in + * the string set. They must allocate a buffer of the appropriate + * size immediately following this structure. + */ struct ethtool_gstrings { - __u32 cmd; /* ETHTOOL_GSTRINGS */ - __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/ - __u32 len; /* number of strings in the string set */ + __u32 cmd; + __u32 string_set; + __u32 len; __u8 data[0]; }; +/** + * struct ethtool_sset_info - string set information + * @cmd: Command number = %ETHTOOL_GSSET_INFO + * @sset_mask: On entry, a bitmask of string sets to query, with bits + * numbered according to &enum ethtool_stringset. On return, a + * bitmask of those string sets queried that are supported. + * @data: Buffer for string set sizes. On return, this contains the + * size of each string set that was queried and supported, in + * order of ID. + * + * Example: The user passes in @sset_mask = 0x7 (sets 0, 1, 2) and on + * return @sset_mask == 0x6 (sets 1, 2). Then @data[0] contains the + * size of set 1 and @data[1] contains the size of set 2. + * + * Users must allocate a buffer of the appropriate size (4 * number of + * sets queried) immediately following this structure. + */ struct ethtool_sset_info { - __u32 cmd; /* ETHTOOL_GSSET_INFO */ + __u32 cmd; __u32 reserved; - __u64 sset_mask; /* input: each bit selects an sset to query */ - /* output: each bit a returned sset */ - __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits - in sset_mask. One bit implies one - __u32, two bits implies two - __u32's, etc. */ + __u64 sset_mask; + __u32 data[0]; }; /** -- cgit v1.2.2 From 4e5a62db2bed17b2b6241850f330c820f75bc3cd Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 12 Feb 2014 22:14:38 +0000 Subject: ethtool: Expand documentation of struct ethtool_test Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index e726340d1f8e..f246f3703ed8 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -575,12 +575,25 @@ enum ethtool_test_flags { ETH_TEST_FL_EXTERNAL_LB_DONE = (1 << 3), }; -/* for requesting NIC test and getting results*/ +/** + * struct ethtool_test - device self-test invocation + * @cmd: Command number = %ETHTOOL_TEST + * @flags: A bitmask of flags from &enum ethtool_test_flags. Some + * flags may be set by the user on entry; others may be set by + * the driver on return. + * @len: On return, the number of test results + * @data: Array of test results + * + * Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the + * number of test results that will be returned. They must allocate a + * buffer of the appropriate size (8 * number of results) immediately + * following this structure. + */ struct ethtool_test { - __u32 cmd; /* ETHTOOL_TEST */ - __u32 flags; /* ETH_TEST_FL_xxx */ + __u32 cmd; + __u32 flags; __u32 reserved; - __u32 len; /* result length, in number of u64 elements */ + __u32 len; __u64 data[0]; }; -- cgit v1.2.2 From 590912298c2d7d9d69c87d93af1f2f8b365f1e04 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 12 Feb 2014 22:14:43 +0000 Subject: ethtool: Expand documentation of struct ethtool_stats Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index f246f3703ed8..e96aec0bf7c1 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -597,10 +597,20 @@ struct ethtool_test { __u64 data[0]; }; -/* for dumping NIC-specific statistics */ +/** + * struct ethtool_stats - device-specific statistics + * @cmd: Command number = %ETHTOOL_GSTATS + * @n_stats: On return, the number of statistics + * @data: Array of statistics + * + * Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the + * number of statistics that will be returned. They must allocate a + * buffer of the appropriate size (8 * number of statistics) + * immediately following this structure. + */ struct ethtool_stats { - __u32 cmd; /* ETHTOOL_GSTATS */ - __u32 n_stats; /* number of u64's being returned */ + __u32 cmd; + __u32 n_stats; __u64 data[0]; }; -- cgit v1.2.2 From f432c095f78cd77df049bd0a8322e91ed6d3c59a Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 12 Feb 2014 22:14:48 +0000 Subject: ethtool: Expand documentation of struct ethtool_perm_addr Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index e96aec0bf7c1..79be416f03e6 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -614,8 +614,19 @@ struct ethtool_stats { __u64 data[0]; }; +/** + * struct ethtool_perm_addr - permanent hardware address + * @cmd: Command number = %ETHTOOL_GPERMADDR + * @size: On entry, the size of the buffer. On return, the size of the + * address. The command fails if the buffer is too small. + * @data: Buffer for the address + * + * Users must allocate the buffer immediately following this structure. + * A buffer size of %MAX_ADDR_LEN should be sufficient for any address + * type. + */ struct ethtool_perm_addr { - __u32 cmd; /* ETHTOOL_GPERMADDR */ + __u32 cmd; __u32 size; __u8 data[0]; }; -- cgit v1.2.2 From ba569dc3e8b9964a91da0cb802d3e46796e1168e Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 12 Feb 2014 22:14:59 +0000 Subject: ethtool: Move kernel-doc comment next to struct ethtool_dump definition The kernel-doc script does not tolerate the macro definition in between. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 79be416f03e6..24418ac78b77 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -920,9 +920,6 @@ struct ethtool_flash { * for %ETHTOOL_GET_DUMP_FLAG command * @data: data collected for get dump data operation */ - -#define ETH_FW_DUMP_DISABLE 0 - struct ethtool_dump { __u32 cmd; __u32 version; @@ -931,6 +928,8 @@ struct ethtool_dump { __u8 data[0]; }; +#define ETH_FW_DUMP_DISABLE 0 + /* for returning and changing feature sets */ /** -- cgit v1.2.2 From 073e3cf21916afa25c1f3e8807a8ebf4faf6f4d5 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 12 Feb 2014 22:15:09 +0000 Subject: ethtool: Fix unwanted section breaks in kernel-doc A colon almost unavoidably starts a new section. The script should be changed to provide a way to avoid this, but for now reword the comments to avoid using colons. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 24418ac78b77..fd161e91b6d7 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -351,17 +351,18 @@ struct ethtool_modinfo { * @rate_sample_interval: How often to do adaptive coalescing packet rate * sampling, measured in seconds. Must not be zero. * - * Each pair of (usecs, max_frames) fields specifies this exit - * condition for interrupt coalescing: + * Each pair of (usecs, max_frames) fields specifies that interrupts + * should be coalesced until * (usecs > 0 && time_since_first_completion >= usecs) || * (max_frames > 0 && completed_frames >= max_frames) + * * It is illegal to set both usecs and max_frames to zero as this * would cause interrupts to never be generated. To disable * coalescing, set usecs = 0 and max_frames = 1. * * Some implementations ignore the value of max_frames and use the - * condition: - * time_since_first_completion >= usecs + * condition time_since_first_completion >= usecs + * * This is deprecated. Drivers for hardware that does not support * counting completions should validate that max_frames == !rx_usecs. * @@ -809,7 +810,7 @@ struct ethtool_rx_flow_spec { * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused * location, and may remove a rule at a later location (lower * priority) that matches exactly the same set of flows. The special - * values are: %RX_CLS_LOC_ANY, selecting any location; + * values are %RX_CLS_LOC_ANY, selecting any location; * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum * priority); and %RX_CLS_LOC_LAST, selecting the last suitable * location (minimum priority). Additional special values may be @@ -949,8 +950,9 @@ struct ethtool_get_features_block { /** * struct ethtool_gfeatures - command to get state of device's features * @cmd: command number = %ETHTOOL_GFEATURES - * @size: in: number of elements in the features[] array; - * out: number of elements in features[] needed to hold all features + * @size: On entry, the number of elements in the features[] array; + * on return, the number of elements in features[] needed to hold + * all features * @features: state of features */ struct ethtool_gfeatures { -- cgit v1.2.2 From 977cb0ecf82eb6d15562573c31edebf90db35163 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 13 Feb 2014 14:27:40 -0800 Subject: tcp: add pacing_rate information into tcp_info Add two new fields to struct tcp_info, to report sk_pacing_rate and sk_max_pacing_rate to monitoring applications, as ss from iproute2. User exported fields are 64bit, even if kernel is currently using 32bit fields. lpaa5:~# ss -i .. skmem:(r0,rb357120,t0,tb2097152,f1584,w1980880,o0,bl0) ts sack cubic wscale:6,6 rto:400 rtt:0.875/0.75 mss:1448 cwnd:1 ssthresh:12 send 13.2Mbps pacing_rate 3336.2Mbps unacked:15 retrans:1/5448 lost:15 rcv_space:29200 Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/uapi/linux/tcp.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index 377f1e59411d..3b9718328d8b 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -186,6 +186,9 @@ struct tcp_info { __u32 tcpi_rcv_space; __u32 tcpi_total_retrans; + + __u64 tcpi_pacing_rate; + __u64 tcpi_max_pacing_rate; }; /* for TCP_MD5SIG socket option */ -- cgit v1.2.2 From e487e4dc2eb227c52fc71eae683181fa917163b8 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Tue, 14 Jan 2014 17:52:09 -0700 Subject: NFC: Add ISO/IEC 15693 header definitions Add the header definitions required by upcoming patches that add support for ISO/IEC 15693. Signed-off-by: Mark A. Greer Signed-off-by: Samuel Ortiz --- include/uapi/linux/nfc.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index 6ad6cc03ccd3..9789dc95b6a8 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -150,6 +150,8 @@ enum nfc_commands { * @NFC_ATTR_SE_TYPE: Secure element type (UICC or EMBEDDED) * @NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS: Firmware download operation status * @NFC_ATTR_APDU: Secure element APDU + * @NFC_ATTR_TARGET_ISO15693_DSFID: ISO 15693 Data Storage Format Identifier + * @NFC_ATTR_TARGET_ISO15693_UID: ISO 15693 Unique Identifier */ enum nfc_attrs { NFC_ATTR_UNSPEC, @@ -178,6 +180,8 @@ enum nfc_attrs { NFC_ATTR_SE_AID, NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS, NFC_ATTR_SE_APDU, + NFC_ATTR_TARGET_ISO15693_DSFID, + NFC_ATTR_TARGET_ISO15693_UID, /* private: internal use only */ __NFC_ATTR_AFTER_LAST }; @@ -200,6 +204,7 @@ enum nfc_sdp_attr { #define NFC_SENSF_RES_MAXSIZE 18 #define NFC_GB_MAXSIZE 48 #define NFC_FIRMWARE_NAME_MAXSIZE 32 +#define NFC_ISO15693_UID_MAXSIZE 8 /* NFC protocols */ #define NFC_PROTO_JEWEL 1 @@ -208,8 +213,9 @@ enum nfc_sdp_attr { #define NFC_PROTO_ISO14443 4 #define NFC_PROTO_NFC_DEP 5 #define NFC_PROTO_ISO14443_B 6 +#define NFC_PROTO_ISO15693 7 -#define NFC_PROTO_MAX 7 +#define NFC_PROTO_MAX 8 /* NFC communication modes */ #define NFC_COMM_ACTIVE 0 @@ -227,6 +233,7 @@ enum nfc_sdp_attr { #define NFC_PROTO_ISO14443_MASK (1 << NFC_PROTO_ISO14443) #define NFC_PROTO_NFC_DEP_MASK (1 << NFC_PROTO_NFC_DEP) #define NFC_PROTO_ISO14443_B_MASK (1 << NFC_PROTO_ISO14443_B) +#define NFC_PROTO_ISO15693_MASK (1 << NFC_PROTO_ISO15693) /* NFC Secure Elements */ #define NFC_SE_UICC 0x1 -- cgit v1.2.2 From d3623099d3509fa68fa28235366049dd3156c63a Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Fri, 14 Feb 2014 15:30:36 +0100 Subject: ipsec: add support of limited SA dump The goal of this patch is to allow userland to dump only a part of SA by specifying a filter during the dump. The kernel is in charge to filter SA, this avoids to generate useless netlink traffic (it save also some cpu cycles). This is particularly useful when there is a big number of SA set on the system. Note that I removed the union in struct xfrm_state_walk to fix a problem on arm. struct netlink_callback->args is defined as a array of 6 long and the first long is used in xfrm code to flag the cb as initialized. Hence, we must have: sizeof(struct xfrm_state_walk) <= sizeof(long) * 5. With the union, it was false on arm (sizeof(struct xfrm_state_walk) was sizeof(long) * 7), due to the padding. In fact, whatever the arch is, this union seems useless, there will be always padding after it. Removing it will not increase the size of this struct (and reduce it on arm). Signed-off-by: Nicolas Dichtel Signed-off-by: Steffen Klassert --- include/uapi/linux/pfkeyv2.h | 15 ++++++++++++++- include/uapi/linux/xfrm.h | 10 ++++++++++ 2 files changed, 24 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/pfkeyv2.h b/include/uapi/linux/pfkeyv2.h index 0b80c806631f..ada7f0171ccc 100644 --- a/include/uapi/linux/pfkeyv2.h +++ b/include/uapi/linux/pfkeyv2.h @@ -235,6 +235,18 @@ struct sadb_x_kmaddress { } __attribute__((packed)); /* sizeof(struct sadb_x_kmaddress) == 8 */ +/* To specify the SA dump filter */ +struct sadb_x_filter { + __u16 sadb_x_filter_len; + __u16 sadb_x_filter_exttype; + __u32 sadb_x_filter_saddr[4]; + __u32 sadb_x_filter_daddr[4]; + __u16 sadb_x_filter_family; + __u8 sadb_x_filter_splen; + __u8 sadb_x_filter_dplen; +} __attribute__((packed)); +/* sizeof(struct sadb_x_filter) == 40 */ + /* Message types */ #define SADB_RESERVED 0 #define SADB_GETSPI 1 @@ -358,7 +370,8 @@ struct sadb_x_kmaddress { #define SADB_X_EXT_SEC_CTX 24 /* Used with MIGRATE to pass @ to IKE for negotiation */ #define SADB_X_EXT_KMADDRESS 25 -#define SADB_EXT_MAX 25 +#define SADB_X_EXT_FILTER 26 +#define SADB_EXT_MAX 26 /* Identity Extension values */ #define SADB_IDENTTYPE_RESERVED 0 diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h index a8cd6a4a2970..6550c679584f 100644 --- a/include/uapi/linux/xfrm.h +++ b/include/uapi/linux/xfrm.h @@ -298,6 +298,8 @@ enum xfrm_attr_type_t { XFRMA_TFCPAD, /* __u32 */ XFRMA_REPLAY_ESN_VAL, /* struct xfrm_replay_esn */ XFRMA_SA_EXTRA_FLAGS, /* __u32 */ + XFRMA_PROTO, /* __u8 */ + XFRMA_FILTER, /* struct xfrm_filter */ __XFRMA_MAX #define XFRMA_MAX (__XFRMA_MAX - 1) @@ -474,6 +476,14 @@ struct xfrm_user_mapping { __be16 new_sport; }; +struct xfrm_filter { + xfrm_address_t saddr; + xfrm_address_t daddr; + __u16 family; + __u8 splen; + __u8 dplen; +}; + #ifndef __KERNEL__ /* backwards compatibility for userspace */ #define XFRMGRP_ACQUIRE 1 -- cgit v1.2.2 From d2bf2f34cc1a8304a5dab0d42e7a2ae58ede94cd Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 18 Feb 2014 15:25:32 +0100 Subject: netfilter: nft_ct: labels get support This also adds NF_CT_LABELS_MAX_SIZE so it can be re-used as BUILD_BUG_ON in nft_ct. At this time, nft doesn't yet support writing to the label area; when this changes the label->words handling needs to be moved out of xt_connlabel.c into nf_conntrack_labels.c. Also removes a useless run-time check: words cannot grow beyond 4 (32 bit) or 2 (64bit) since xt_connlabel enforces a maximum of 128 labels. Signed-off-by: Florian Westphal Acked-by: Patrick McHardy Signed-off-by: Pablo Neira Ayuso --- include/uapi/linux/netfilter/nf_tables.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h index 83c985a6170b..c84c452c62a7 100644 --- a/include/uapi/linux/netfilter/nf_tables.h +++ b/include/uapi/linux/netfilter/nf_tables.h @@ -601,6 +601,7 @@ enum nft_ct_keys { NFT_CT_PROTOCOL, NFT_CT_PROTO_SRC, NFT_CT_PROTO_DST, + NFT_CT_LABELS, }; /** -- cgit v1.2.2 From df942e7ba70cd0a7aa9e0432b8a6a328de2c5574 Mon Sep 17 00:00:00 2001 From: Sunil Dutt Undekari Date: Thu, 20 Feb 2014 16:22:09 +0530 Subject: cfg80211: Pass TDLS peer capability information in tdls_mgmt While framing the TDLS Setup Confirmation frame, the driver needs to know if the TDLS peer is VHT/HT/WMM capable and thus shall construct the VHT/HT operation / WMM parameter elements accordingly. Supplicant determines if the TDLS peer is VHT/HT/WMM capable based on the presence of the respective IEs in the received TDLS Setup Response frame. The host driver should not need to parse the received TDLS Response frame and thus, should be able to rely on the supplicant to indicate the capability of the peer through additional flags while transmitting the TDLS Setup Confirmation frame through tdls_mgmt operations. Signed-off-by: Sunil Dutt Undekari Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index ba1f7625625c..47d7087513e0 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1575,6 +1575,9 @@ enum nl80211_commands { * advertise values that cannot always be met. In such cases, an attempt * to add a new station entry with @NL80211_CMD_NEW_STATION may fail. * + * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. + * As specified in the &enum nl80211_tdls_peer_capability. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1908,6 +1911,8 @@ enum nl80211_attrs { NL80211_ATTR_MAX_AP_ASSOC_STA, + NL80211_ATTR_TDLS_PEER_CAPABILITY, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -4074,4 +4079,20 @@ struct nl80211_vendor_cmd_info { __u32 subcmd; }; +/** + * enum nl80211_tdls_peer_capability - TDLS peer flags. + * + * Used by tdls_mgmt() to determine which conditional elements need + * to be added to TDLS Setup frames. + * + * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable. + * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable. + * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable. + */ +enum nl80211_tdls_peer_capability { + NL80211_TDLS_PEER_HT = 1<<0, + NL80211_TDLS_PEER_VHT = 1<<1, + NL80211_TDLS_PEER_WMM = 1<<2, +}; + #endif /* __LINUX_NL80211_H */ -- cgit v1.2.2 From d9b8396a52b4e857263eeb9e1eba474ea11c19bf Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 13 Feb 2014 17:16:10 +0100 Subject: cfg80211: document sched_scan_stop synchronous behaviour Due to userspace assumptions, the sched_scan_stop operation must be synchronous, i.e. once it returns a new scheduled scan must be able to start immediately. Document this in the API. Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 47d7087513e0..81481cff1dc1 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -303,8 +303,9 @@ * passed, all channels allowed for the current regulatory domain * are used. Extra IEs can also be passed from the userspace by * using the %NL80211_ATTR_IE attribute. - * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT - * if scheduled scan is not running. + * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if + * scheduled scan is not running. The caller may assume that as soon + * as the call returns, it is safe to start a new scheduled scan again. * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan * results available. * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has -- cgit v1.2.2 From b0dfd2ea12d92b49639ad84f24ddd00c7ac144b5 Mon Sep 17 00:00:00 2001 From: Janusz Dziedzic Date: Thu, 20 Feb 2014 13:52:16 +0100 Subject: cfg80211: regulatory: introduce NL80211_RRF_AUTO_BW rule flag Introduce NL80211_RRF_AUTO_BW rule flag. If this flag set maximum available bandwidth should be calculated base on contiguous rules and wider channels will be allowed to cross multiple contiguous/overlapping frequency ranges. In case of old kernels maximum bandwidth from regulatory rule will be used, while there is no NL80211_RRF_AUTO_BW flag. This fixes the previous commit 9752482083066af7ac18a5ca376f ("cfg80211: regulatory introduce maximum bandwidth calculation") which was found to be a problem for userspace API compatibility. Signed-off-by: Janusz Dziedzic [edit commit log, use sizeof()] Signed-off-by: Johannes Berg Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 81481cff1dc1..ff72cab3cd3a 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2443,10 +2443,7 @@ enum nl80211_reg_type { * in KHz. This is not a center a frequency but an actual regulatory * band edge. * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this - * frequency range, in KHz. If not present or 0, maximum available - * bandwidth should be calculated base on contiguous rules and wider - * channels will be allowed to cross multiple contiguous/overlapping - * frequency ranges. + * frequency range, in KHz. * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain * for a given frequency range. The value is in mBi (100 * dBi). * If you don't have one then don't send this. @@ -2517,6 +2514,9 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed, * this includes probe requests or modes of operation that require * beaconing. + * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated + * base on contiguous rules and wider channels will be allowed to cross + * multiple contiguous/overlapping frequency ranges. */ enum nl80211_reg_rule_flags { NL80211_RRF_NO_OFDM = 1<<0, @@ -2528,6 +2528,7 @@ enum nl80211_reg_rule_flags { NL80211_RRF_PTMP_ONLY = 1<<6, NL80211_RRF_NO_IR = 1<<7, __NL80211_RRF_NO_IBSS = 1<<8, + NL80211_RRF_AUTO_BW = 1<<11, }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR -- cgit v1.2.2 From 089027e57cfa79337feffdd7252c8ba0be352afa Mon Sep 17 00:00:00 2001 From: Janusz Dziedzic Date: Fri, 21 Feb 2014 19:46:12 +0100 Subject: cfg80211: regulatory: allow getting DFS CAC time from userspace Introduce DFS CAC time as a regd param, configured per REG_RULE and set per channel in cfg80211. DFS CAC time is close connected with regulatory database configuration. Instead of using hardcoded values, get DFS CAC time form regulatory database. Pass DFS CAC time to user mode (mainly for iw reg get, iw list, iw info). Allow setting DFS CAC time via CRDA. Add support for internal regulatory database. Signed-off-by: Janusz Dziedzic [rewrap commit log] Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index ff72cab3cd3a..1ba9d626aa83 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2335,6 +2335,7 @@ enum nl80211_band_attr { * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel * using this channel as the primary or any of the secondary channels * isn't possible + * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -2353,6 +2354,7 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_HT40_PLUS, NL80211_FREQUENCY_ATTR_NO_80MHZ, NL80211_FREQUENCY_ATTR_NO_160MHZ, + NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -2449,6 +2451,8 @@ enum nl80211_reg_type { * If you don't have one then don't send this. * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for * a given frequency range. The value is in mBm (100 * dBm). + * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. + * If not present or 0 default CAC time will be used. * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number * currently defined * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use @@ -2464,6 +2468,8 @@ enum nl80211_reg_rule_attr { NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, NL80211_ATTR_POWER_RULE_MAX_EIRP, + NL80211_ATTR_DFS_CAC_TIME, + /* keep last */ __NL80211_REG_RULE_ATTR_AFTER_LAST, NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 -- cgit v1.2.2 From 2ebe21fdde1c92ef1654f23d29194145be0e1ddc Mon Sep 17 00:00:00 2001 From: Neil Jerram Date: Tue, 25 Feb 2014 11:17:25 +0000 Subject: net: order MPLS ethertypes numerically All ethertypes other than ETH_P_MPLS_UC, ETH_P_MPLS_MC and ETH_P_ATMMPOA were already ordered numerically. This commit moves those three ETH_P_... values into correct numerical order too. Signed-off-by: Neil Jerram Signed-off-by: David S. Miller --- include/uapi/linux/if_ether.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index 2ce0f6a78fa5..ba8b15f07940 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -68,11 +68,11 @@ #define ETH_P_SLOW 0x8809 /* Slow Protocol. See 802.3ad 43B */ #define ETH_P_WCCP 0x883E /* Web-cache coordination protocol * defined in draft-wilson-wrec-wccp-v2-00.txt */ -#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */ -#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */ #define ETH_P_MPLS_UC 0x8847 /* MPLS Unicast traffic */ #define ETH_P_MPLS_MC 0x8848 /* MPLS Multicast traffic */ #define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */ +#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */ +#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */ #define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */ #define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport * over Ethernet -- cgit v1.2.2 From 8e165e20348b53583f6c6cb45865b89209f4aa13 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 25 Feb 2014 14:34:32 +0100 Subject: net: tcp: add mib counters to track zero window transitions Three counters are added: - one to track when we went from non-zero to zero window - one to track the reverse - one counter incremented when we want to announce zero window, but can't because we would shrink current window. Suggested-by: Eric Dumazet Signed-off-by: Florian Westphal Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/uapi/linux/snmp.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h index bbaba22f2d1b..8d64a7e5d371 100644 --- a/include/uapi/linux/snmp.h +++ b/include/uapi/linux/snmp.h @@ -259,6 +259,9 @@ enum LINUX_MIB_TCPSPURIOUS_RTX_HOSTQUEUES, /* TCPSpuriousRtxHostQueues */ LINUX_MIB_BUSYPOLLRXPACKETS, /* BusyPollRxPackets */ LINUX_MIB_TCPAUTOCORKING, /* TCPAutoCorking */ + LINUX_MIB_TCPFROMZEROWINDOWADV, /* TCPFromZeroWindowAdv */ + LINUX_MIB_TCPTOZEROWINDOWADV, /* TCPToZeroWindowAdv */ + LINUX_MIB_TCPWANTZEROWINDOWADV, /* TCPWantZeroWindowAdv */ __LINUX_MIB_MAX }; -- cgit v1.2.2 From 1b346576359c72bee34b1476b4fc63d77d37b314 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Wed, 26 Feb 2014 01:20:42 +0100 Subject: ipv4: yet another new IP_MTU_DISCOVER option IP_PMTUDISC_OMIT IP_PMTUDISC_INTERFACE has a design error: because it does not allow the generation of fragments if the interface mtu is exceeded, it is very hard to make use of this option in already deployed name server software for which I introduced this option. This patch adds yet another new IP_MTU_DISCOVER option to not honor any path mtu information and not accepting new icmp notifications destined for the socket this option is enabled on. But we allow outgoing fragmentation in case the packet size exceeds the outgoing interface mtu. As such this new option can be used as a drop-in replacement for IP_PMTUDISC_DONT, which is currently in use by most name server software making the adoption of this option very smooth and easy. The original advantage of IP_PMTUDISC_INTERFACE is still maintained: ignoring incoming path MTU updates and not honoring discovered path MTUs in the output path. Fixes: 482fc6094afad5 ("ipv4: introduce new IP_MTU_DISCOVER mode IP_PMTUDISC_INTERFACE") Cc: Florian Weimer Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- include/uapi/linux/in.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h index 393c5de09d42..c33a65e3d62c 100644 --- a/include/uapi/linux/in.h +++ b/include/uapi/linux/in.h @@ -120,6 +120,10 @@ struct in_addr { * this socket to prevent accepting spoofed ones. */ #define IP_PMTUDISC_INTERFACE 4 +/* weaker version of IP_PMTUDISC_INTERFACE, which allos packets to get + * fragmented if they exeed the interface mtu + */ +#define IP_PMTUDISC_OMIT 5 #define IP_MULTICAST_IF 32 #define IP_MULTICAST_TTL 33 -- cgit v1.2.2 From 0b95227a7ba7e69f795757cd7c839eff0615f2d1 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Wed, 26 Feb 2014 01:20:43 +0100 Subject: ipv6: yet another new IPV6_MTU_DISCOVER option IPV6_PMTUDISC_OMIT This option has the same semantic as IP_PMTUDISC_OMIT for IPv4 which got recently introduced. It doesn't honor the path mtu discovered by the host but in contrary to IPV6_PMTUDISC_INTERFACE allows the generation of fragments if the packet size exceeds the MTU of the outgoing interface MTU. Fixes: 93b36cf3425b9b ("ipv6: support IPV6_PMTU_INTERFACE on sockets") Cc: Florian Weimer Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- include/uapi/linux/in6.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h index e9a1d2d973b6..0d8e0f0342dc 100644 --- a/include/uapi/linux/in6.h +++ b/include/uapi/linux/in6.h @@ -185,6 +185,10 @@ struct in6_flowlabel_req { * also see comments on IP_PMTUDISC_INTERFACE */ #define IPV6_PMTUDISC_INTERFACE 4 +/* weaker version of IPV6_PMTUDISC_INTERFACE, which allows packets to + * get fragmented if they exceed the interface mtu + */ +#define IPV6_PMTUDISC_OMIT 5 /* Flowlabel */ #define IPV6_FLOWLABEL_MGR 32 -- cgit v1.2.2 From 740b0f1841f6e39085b711d41db9ffb07198682b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 26 Feb 2014 14:02:48 -0800 Subject: tcp: switch rtt estimations to usec resolution Upcoming congestion controls for TCP require usec resolution for RTT estimations. Millisecond resolution is simply not enough these days. FQ/pacing in DC environments also require this change for finer control and removal of bimodal behavior due to the current hack in tcp_update_pacing_rate() for 'small rtt' TCP_CONG_RTT_STAMP is no longer needed. As Julian Anastasov pointed out, we need to keep user compatibility : tcp_metrics used to export RTT and RTTVAR in msec resolution, so we added RTT_US and RTTVAR_US. An iproute2 patch is needed to use the new attributes if provided by the kernel. In this example ss command displays a srtt of 32 usecs (10Gbit link) lpk51:~# ./ss -i dst lpk52 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 1 10.246.11.51:42959 10.246.11.52:64614 cubic wscale:6,6 rto:201 rtt:0.032/0.001 ato:40 mss:1448 cwnd:10 send 3620.0Mbps pacing_rate 7240.0Mbps unacked:1 rcv_rtt:993 rcv_space:29559 Updated iproute2 ip command displays : lpk51:~# ./ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 274us rttvar 213us source 10.246.11.51 Old binary displays : lpk51:~# ip tcp_metrics | grep 10.246.11.52 10.246.11.52 age 561.914sec cwnd 10 rtt 250us rttvar 125us source 10.246.11.51 With help from Julian Anastasov, Stephen Hemminger and Yuchung Cheng Signed-off-by: Eric Dumazet Acked-by: Neal Cardwell Cc: Stephen Hemminger Cc: Yuchung Cheng Cc: Larry Brakmo Cc: Julian Anastasov Signed-off-by: David S. Miller --- include/uapi/linux/tcp_metrics.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tcp_metrics.h b/include/uapi/linux/tcp_metrics.h index 54a37b13f2c4..93533926035c 100644 --- a/include/uapi/linux/tcp_metrics.h +++ b/include/uapi/linux/tcp_metrics.h @@ -11,12 +11,15 @@ #define TCP_METRICS_GENL_VERSION 0x1 enum tcp_metric_index { - TCP_METRIC_RTT, - TCP_METRIC_RTTVAR, + TCP_METRIC_RTT, /* in ms units */ + TCP_METRIC_RTTVAR, /* in ms units */ TCP_METRIC_SSTHRESH, TCP_METRIC_CWND, TCP_METRIC_REORDERING, + TCP_METRIC_RTT_US, /* in usec units */ + TCP_METRIC_RTTVAR_US, /* in usec units */ + /* Always last. */ __TCP_METRIC_MAX, }; -- cgit v1.2.2 From 0768b3b3d228c5acf2075f40f3d25cda30011d4f Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 19 Feb 2014 17:27:06 +0100 Subject: netfilter: nf_tables: add optional user data area to rules This allows us to store user comment strings, but it could be also used to store any kind of information that the user application needs to link to the rule. Scratch 8 bits for the new ulen field that indicates the length the user data area. 4 bits from the handle (so it's 42 bits long, according to Patrick, it would last 139 years with 1000 new rules per second) and 4 bits from dlen (so the expression data area is 4K, which seems sufficient by now even considering the compatibility layer). Signed-off-by: Pablo Neira Ayuso Acked-by: Patrick McHardy --- include/uapi/linux/netfilter/nf_tables.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h index c84c452c62a7..c88ccbfda5f1 100644 --- a/include/uapi/linux/netfilter/nf_tables.h +++ b/include/uapi/linux/netfilter/nf_tables.h @@ -1,7 +1,8 @@ #ifndef _LINUX_NF_TABLES_H #define _LINUX_NF_TABLES_H -#define NFT_CHAIN_MAXNAMELEN 32 +#define NFT_CHAIN_MAXNAMELEN 32 +#define NFT_USERDATA_MAXLEN 256 enum nft_registers { NFT_REG_VERDICT, @@ -156,6 +157,7 @@ enum nft_chain_attributes { * @NFTA_RULE_EXPRESSIONS: list of expressions (NLA_NESTED: nft_expr_attributes) * @NFTA_RULE_COMPAT: compatibility specifications of the rule (NLA_NESTED: nft_rule_compat_attributes) * @NFTA_RULE_POSITION: numeric handle of the previous rule (NLA_U64) + * @NFTA_RULE_USERDATA: user data (NLA_BINARY, NFT_USERDATA_MAXLEN) */ enum nft_rule_attributes { NFTA_RULE_UNSPEC, @@ -165,6 +167,7 @@ enum nft_rule_attributes { NFTA_RULE_EXPRESSIONS, NFTA_RULE_COMPAT, NFTA_RULE_POSITION, + NFTA_RULE_USERDATA, __NFTA_RULE_MAX }; #define NFTA_RULE_MAX (__NFTA_RULE_MAX - 1) -- cgit v1.2.2 From 589f5816f3f660aa4b1c93fc9eac58a1e807bbbb Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 25 Feb 2014 17:15:12 -0800 Subject: net: kdoc struct net_device flags and priv_flags We have documentation for these flags but they're scattered all over the place. #defines don't allow documentation to be written easily so to help to start bringing some documentation together use the enums kdoc practice but keep the defines to allow userspace to be able to #ifdef them. I've verified the same values are assigned before and after with a simple userspace test program [0] and checksumming the output. [0] http://drvbp1.linux-foundation.org/~mcgrof/kdoc/netdev_flags/ mcgrof@gnat ~/tmp $ ./check-flags | sha1sum 0ec5b6b1840aa3bb9ce464e61c564820871c92c3 - Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Ben Hutchings Cc: Florian Fainelli Cc: David Miller Signed-off-by: Luis R. Rodriguez Signed-off-by: David S. Miller --- include/uapi/linux/if.h | 213 ++++++++++++++++++++++++++++++++++++------------ 1 file changed, 161 insertions(+), 52 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if.h b/include/uapi/linux/if.h index d758163b0e43..42ec87994cf6 100644 --- a/include/uapi/linux/if.h +++ b/include/uapi/linux/if.h @@ -27,64 +27,173 @@ #define IFALIASZ 256 #include -/* Standard interface flags (netdevice->flags). */ -#define IFF_UP 0x1 /* interface is up */ -#define IFF_BROADCAST 0x2 /* broadcast address valid */ -#define IFF_DEBUG 0x4 /* turn on debugging */ -#define IFF_LOOPBACK 0x8 /* is a loopback net */ -#define IFF_POINTOPOINT 0x10 /* interface is has p-p link */ -#define IFF_NOTRAILERS 0x20 /* avoid use of trailers */ -#define IFF_RUNNING 0x40 /* interface RFC2863 OPER_UP */ -#define IFF_NOARP 0x80 /* no ARP protocol */ -#define IFF_PROMISC 0x100 /* receive all packets */ -#define IFF_ALLMULTI 0x200 /* receive all multicast packets*/ - -#define IFF_MASTER 0x400 /* master of a load balancer */ -#define IFF_SLAVE 0x800 /* slave of a load balancer */ - -#define IFF_MULTICAST 0x1000 /* Supports multicast */ - -#define IFF_PORTSEL 0x2000 /* can set media type */ -#define IFF_AUTOMEDIA 0x4000 /* auto media select active */ -#define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses*/ - -#define IFF_LOWER_UP 0x10000 /* driver signals L1 up */ -#define IFF_DORMANT 0x20000 /* driver signals dormant */ +/** + * enum net_device_flags - &struct net_device flags + * + * These are the &struct net_device flags, they can be set by drivers, the + * kernel and some can be triggered by userspace. Userspace can query and + * set these flags using userspace utilities but there is also a sysfs + * entry available for all dev flags which can be queried and set. These flags + * are shared for all types of net_devices. The sysfs entries are available + * via /sys/class/net//flags. Flags which can be toggled through sysfs + * are annotated below, note that only a few flags can be toggled and some + * other flags are always always preserved from the original net_device flags + * even if you try to set them via sysfs. Flags which are always preserved + * are kept under the flag grouping @IFF_VOLATILE. Flags which are volatile + * are annotated below as such. + * + * You should have a pretty good reason to be extending these flags. + * + * @IFF_UP: interface is up. Can be toggled through sysfs. + * @IFF_BROADCAST: broadcast address valid. Volatile. + * @IFF_DEBUG: turn on debugging. Can be toggled through sysfs. + * @IFF_LOOPBACK: is a loopback net. Volatile. + * @IFF_POINTOPOINT: interface is has p-p link. Volatile. + * @IFF_NOTRAILERS: avoid use of trailers. Can be toggled through sysfs. + * Volatile. + * @IFF_RUNNING: interface RFC2863 OPER_UP. Volatile. + * @IFF_NOARP: no ARP protocol. Can be toggled through sysfs. Volatile. + * @IFF_PROMISC: receive all packets. Can be toggled through sysfs. + * @IFF_ALLMULTI: receive all multicast packets. Can be toggled through + * sysfs. + * @IFF_MASTER: master of a load balancer. Volatile. + * @IFF_SLAVE: slave of a load balancer. Volatile. + * @IFF_MULTICAST: Supports multicast. Can be toggled through sysfs. + * @IFF_PORTSEL: can set media type. Can be toggled through sysfs. + * @IFF_AUTOMEDIA: auto media select active. Can be toggled through sysfs. + * @IFF_DYNAMIC: dialup device with changing addresses. Can be toggled + * through sysfs. + * @IFF_LOWER_UP: driver signals L1 up. Volatile. + * @IFF_DORMANT: driver signals dormant. Volatile. + * @IFF_ECHO: echo sent packets. Volatile. + */ +enum net_device_flags { + IFF_UP = 1<<0, /* sysfs */ + IFF_BROADCAST = 1<<1, /* volatile */ + IFF_DEBUG = 1<<2, /* sysfs */ + IFF_LOOPBACK = 1<<3, /* volatile */ + IFF_POINTOPOINT = 1<<4, /* volatile */ + IFF_NOTRAILERS = 1<<5, /* sysfs */ + IFF_RUNNING = 1<<6, /* volatile */ + IFF_NOARP = 1<<7, /* sysfs */ + IFF_PROMISC = 1<<8, /* sysfs */ + IFF_ALLMULTI = 1<<9, /* sysfs */ + IFF_MASTER = 1<<10, /* volatile */ + IFF_SLAVE = 1<<11, /* volatile */ + IFF_MULTICAST = 1<<12, /* sysfs */ + IFF_PORTSEL = 1<<13, /* sysfs */ + IFF_AUTOMEDIA = 1<<14, /* sysfs */ + IFF_DYNAMIC = 1<<15, /* sysfs */ + IFF_LOWER_UP = 1<<16, /* volatile */ + IFF_DORMANT = 1<<17, /* volatile */ + IFF_ECHO = 1<<18, /* volatile */ +}; -#define IFF_ECHO 0x40000 /* echo sent packets */ +#define IFF_UP IFF_UP +#define IFF_BROADCAST IFF_BROADCAST +#define IFF_DEBUG IFF_DEBUG +#define IFF_LOOPBACK IFF_LOOPBACK +#define IFF_POINTOPOINT IFF_POINTOPOINT +#define IFF_NOTRAILERS IFF_NOTRAILERS +#define IFF_RUNNING IFF_RUNNING +#define IFF_NOARP IFF_NOARP +#define IFF_PROMISC IFF_PROMISC +#define IFF_ALLMULTI IFF_ALLMULTI +#define IFF_MASTER IFF_MASTER +#define IFF_SLAVE IFF_SLAVE +#define IFF_MULTICAST IFF_MULTICAST +#define IFF_PORTSEL IFF_PORTSEL +#define IFF_AUTOMEDIA IFF_AUTOMEDIA +#define IFF_DYNAMIC IFF_DYNAMIC +#define IFF_LOWER_UP IFF_LOWER_UP +#define IFF_DORMANT IFF_DORMANT +#define IFF_ECHO IFF_ECHO #define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\ IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT) -/* Private (from user) interface flags (netdevice->priv_flags). */ -#define IFF_802_1Q_VLAN 0x1 /* 802.1Q VLAN device. */ -#define IFF_EBRIDGE 0x2 /* Ethernet bridging device. */ -#define IFF_SLAVE_INACTIVE 0x4 /* bonding slave not the curr. active */ -#define IFF_MASTER_8023AD 0x8 /* bonding master, 802.3ad. */ -#define IFF_MASTER_ALB 0x10 /* bonding master, balance-alb. */ -#define IFF_BONDING 0x20 /* bonding master or slave */ -#define IFF_SLAVE_NEEDARP 0x40 /* need ARPs for validation */ -#define IFF_ISATAP 0x80 /* ISATAP interface (RFC4214) */ -#define IFF_MASTER_ARPMON 0x100 /* bonding master, ARP mon in use */ -#define IFF_WAN_HDLC 0x200 /* WAN HDLC device */ -#define IFF_XMIT_DST_RELEASE 0x400 /* dev_hard_start_xmit() is allowed to - * release skb->dst - */ -#define IFF_DONT_BRIDGE 0x800 /* disallow bridging this ether dev */ -#define IFF_DISABLE_NETPOLL 0x1000 /* disable netpoll at run-time */ -#define IFF_MACVLAN_PORT 0x2000 /* device used as macvlan port */ -#define IFF_BRIDGE_PORT 0x4000 /* device used as bridge port */ -#define IFF_OVS_DATAPATH 0x8000 /* device used as Open vSwitch - * datapath port */ -#define IFF_TX_SKB_SHARING 0x10000 /* The interface supports sharing - * skbs on transmit */ -#define IFF_UNICAST_FLT 0x20000 /* Supports unicast filtering */ -#define IFF_TEAM_PORT 0x40000 /* device used as team port */ -#define IFF_SUPP_NOFCS 0x80000 /* device supports sending custom FCS */ -#define IFF_LIVE_ADDR_CHANGE 0x100000 /* device supports hardware address - * change when it's running */ -#define IFF_MACVLAN 0x200000 /* Macvlan device */ +/** + * enum net_device_priv_flags - &struct net_device priv_flags + * + * These are the &struct net_device, they are only set internally + * by drivers and used in the kernel. These flags are invisible to + * userspace, this means that the order of these flags can change + * during any kernel release. + * + * You should have a pretty good reason to be extending these flags. + * + * @IFF_802_1Q_VLAN: 802.1Q VLAN device + * @IFF_EBRIDGE: Ethernet bridging device + * @IFF_SLAVE_INACTIVE: bonding slave not the curr. active + * @IFF_MASTER_8023AD: bonding master, 802.3ad + * @IFF_MASTER_ALB: bonding master, balance-alb + * @IFF_BONDING: bonding master or slave + * @IFF_SLAVE_NEEDARP: need ARPs for validation + * @IFF_ISATAP: ISATAP interface (RFC4214) + * @IFF_MASTER_ARPMON: bonding master, ARP mon in use + * @IFF_WAN_HDLC: WAN HDLC device + * @IFF_XMIT_DST_RELEASE: dev_hard_start_xmit() is allowed to + * release skb->dst + * @IFF_DONT_BRIDGE: disallow bridging this ether dev + * @IFF_DISABLE_NETPOLL: disable netpoll at run-time + * @IFF_MACVLAN_PORT: device used as macvlan port + * @IFF_BRIDGE_PORT: device used as bridge port + * @IFF_OVS_DATAPATH: device used as Open vSwitch datapath port + * @IFF_TX_SKB_SHARING: The interface supports sharing skbs on transmit + * @IFF_UNICAST_FLT: Supports unicast filtering + * @IFF_TEAM_PORT: device used as team port + * @IFF_SUPP_NOFCS: device supports sending custom FCS + * @IFF_LIVE_ADDR_CHANGE: device supports hardware address + * change when it's running + * @IFF_MACVLAN: Macvlan device + */ +enum netdev_priv_flags { + IFF_802_1Q_VLAN = 1<<0, + IFF_EBRIDGE = 1<<1, + IFF_SLAVE_INACTIVE = 1<<2, + IFF_MASTER_8023AD = 1<<3, + IFF_MASTER_ALB = 1<<4, + IFF_BONDING = 1<<5, + IFF_SLAVE_NEEDARP = 1<<6, + IFF_ISATAP = 1<<7, + IFF_MASTER_ARPMON = 1<<8, + IFF_WAN_HDLC = 1<<9, + IFF_XMIT_DST_RELEASE = 1<<10, + IFF_DONT_BRIDGE = 1<<11, + IFF_DISABLE_NETPOLL = 1<<12, + IFF_MACVLAN_PORT = 1<<13, + IFF_BRIDGE_PORT = 1<<14, + IFF_OVS_DATAPATH = 1<<15, + IFF_TX_SKB_SHARING = 1<<16, + IFF_UNICAST_FLT = 1<<17, + IFF_TEAM_PORT = 1<<18, + IFF_SUPP_NOFCS = 1<<19, + IFF_LIVE_ADDR_CHANGE = 1<<20, + IFF_MACVLAN = 1<<21, +}; +#define IFF_802_1Q_VLAN IFF_802_1Q_VLAN +#define IFF_EBRIDGE IFF_EBRIDGE +#define IFF_SLAVE_INACTIVE IFF_SLAVE_INACTIVE +#define IFF_MASTER_8023AD IFF_MASTER_8023AD +#define IFF_MASTER_ALB IFF_MASTER_ALB +#define IFF_BONDING IFF_BONDING +#define IFF_SLAVE_NEEDARP IFF_SLAVE_NEEDARP +#define IFF_ISATAP IFF_ISATAP +#define IFF_MASTER_ARPMON IFF_MASTER_ARPMON +#define IFF_WAN_HDLC IFF_WAN_HDLC +#define IFF_XMIT_DST_RELEASE IFF_XMIT_DST_RELEASE +#define IFF_DONT_BRIDGE IFF_DONT_BRIDGE +#define IFF_DISABLE_NETPOLL IFF_DISABLE_NETPOLL +#define IFF_MACVLAN_PORT IFF_MACVLAN_PORT +#define IFF_BRIDGE_PORT IFF_BRIDGE_PORT +#define IFF_OVS_DATAPATH IFF_OVS_DATAPATH +#define IFF_TX_SKB_SHARING IFF_TX_SKB_SHARING +#define IFF_UNICAST_FLT IFF_UNICAST_FLT +#define IFF_TEAM_PORT IFF_TEAM_PORT +#define IFF_SUPP_NOFCS IFF_SUPP_NOFCS +#define IFF_LIVE_ADDR_CHANGE IFF_LIVE_ADDR_CHANGE +#define IFF_MACVLAN IFF_MACVLAN #define IF_GET_IFACE 0x0001 /* for querying only */ #define IF_GET_PROTO 0x0002 -- cgit v1.2.2 From 7aa98047df95d7caf0678e939cdd936dfb99cd06 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 25 Feb 2014 17:15:13 -0800 Subject: net: move net_device priv_flags out from UAPI These are private to userspace, and they're unstable anyway and can be shuffled at will (see 080e4130b1fb) so any userspace application relying on them is on crack. Test compiled with allyesconfig. mcgrof@drvbp1 /pub/mem/mcgrof/net-next (git::master)$ make allyesconfig mcgrof@drvbp1 /pub/mem/mcgrof/net-next (git::master)$ time make -j 20 ... BUILD arch/x86/boot/bzImage Setup is 16992 bytes (padded to 17408 bytes). System is 56153 kB CRC 721d2751 Kernel: arch/x86/boot/bzImage is ready (#1) real 19m35.744s user 280m37.984s sys 27m54.104s Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Ben Hutchings Cc: Florian Fainelli Cc: David Miller Signed-off-by: Luis R. Rodriguez Signed-off-by: David S. Miller --- include/uapi/linux/if.h | 83 ------------------------------------------------- 1 file changed, 83 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if.h b/include/uapi/linux/if.h index 42ec87994cf6..9cf2394f0bcf 100644 --- a/include/uapi/linux/if.h +++ b/include/uapi/linux/if.h @@ -112,89 +112,6 @@ enum net_device_flags { #define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\ IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT) -/** - * enum net_device_priv_flags - &struct net_device priv_flags - * - * These are the &struct net_device, they are only set internally - * by drivers and used in the kernel. These flags are invisible to - * userspace, this means that the order of these flags can change - * during any kernel release. - * - * You should have a pretty good reason to be extending these flags. - * - * @IFF_802_1Q_VLAN: 802.1Q VLAN device - * @IFF_EBRIDGE: Ethernet bridging device - * @IFF_SLAVE_INACTIVE: bonding slave not the curr. active - * @IFF_MASTER_8023AD: bonding master, 802.3ad - * @IFF_MASTER_ALB: bonding master, balance-alb - * @IFF_BONDING: bonding master or slave - * @IFF_SLAVE_NEEDARP: need ARPs for validation - * @IFF_ISATAP: ISATAP interface (RFC4214) - * @IFF_MASTER_ARPMON: bonding master, ARP mon in use - * @IFF_WAN_HDLC: WAN HDLC device - * @IFF_XMIT_DST_RELEASE: dev_hard_start_xmit() is allowed to - * release skb->dst - * @IFF_DONT_BRIDGE: disallow bridging this ether dev - * @IFF_DISABLE_NETPOLL: disable netpoll at run-time - * @IFF_MACVLAN_PORT: device used as macvlan port - * @IFF_BRIDGE_PORT: device used as bridge port - * @IFF_OVS_DATAPATH: device used as Open vSwitch datapath port - * @IFF_TX_SKB_SHARING: The interface supports sharing skbs on transmit - * @IFF_UNICAST_FLT: Supports unicast filtering - * @IFF_TEAM_PORT: device used as team port - * @IFF_SUPP_NOFCS: device supports sending custom FCS - * @IFF_LIVE_ADDR_CHANGE: device supports hardware address - * change when it's running - * @IFF_MACVLAN: Macvlan device - */ -enum netdev_priv_flags { - IFF_802_1Q_VLAN = 1<<0, - IFF_EBRIDGE = 1<<1, - IFF_SLAVE_INACTIVE = 1<<2, - IFF_MASTER_8023AD = 1<<3, - IFF_MASTER_ALB = 1<<4, - IFF_BONDING = 1<<5, - IFF_SLAVE_NEEDARP = 1<<6, - IFF_ISATAP = 1<<7, - IFF_MASTER_ARPMON = 1<<8, - IFF_WAN_HDLC = 1<<9, - IFF_XMIT_DST_RELEASE = 1<<10, - IFF_DONT_BRIDGE = 1<<11, - IFF_DISABLE_NETPOLL = 1<<12, - IFF_MACVLAN_PORT = 1<<13, - IFF_BRIDGE_PORT = 1<<14, - IFF_OVS_DATAPATH = 1<<15, - IFF_TX_SKB_SHARING = 1<<16, - IFF_UNICAST_FLT = 1<<17, - IFF_TEAM_PORT = 1<<18, - IFF_SUPP_NOFCS = 1<<19, - IFF_LIVE_ADDR_CHANGE = 1<<20, - IFF_MACVLAN = 1<<21, -}; - -#define IFF_802_1Q_VLAN IFF_802_1Q_VLAN -#define IFF_EBRIDGE IFF_EBRIDGE -#define IFF_SLAVE_INACTIVE IFF_SLAVE_INACTIVE -#define IFF_MASTER_8023AD IFF_MASTER_8023AD -#define IFF_MASTER_ALB IFF_MASTER_ALB -#define IFF_BONDING IFF_BONDING -#define IFF_SLAVE_NEEDARP IFF_SLAVE_NEEDARP -#define IFF_ISATAP IFF_ISATAP -#define IFF_MASTER_ARPMON IFF_MASTER_ARPMON -#define IFF_WAN_HDLC IFF_WAN_HDLC -#define IFF_XMIT_DST_RELEASE IFF_XMIT_DST_RELEASE -#define IFF_DONT_BRIDGE IFF_DONT_BRIDGE -#define IFF_DISABLE_NETPOLL IFF_DISABLE_NETPOLL -#define IFF_MACVLAN_PORT IFF_MACVLAN_PORT -#define IFF_BRIDGE_PORT IFF_BRIDGE_PORT -#define IFF_OVS_DATAPATH IFF_OVS_DATAPATH -#define IFF_TX_SKB_SHARING IFF_TX_SKB_SHARING -#define IFF_UNICAST_FLT IFF_UNICAST_FLT -#define IFF_TEAM_PORT IFF_TEAM_PORT -#define IFF_SUPP_NOFCS IFF_SUPP_NOFCS -#define IFF_LIVE_ADDR_CHANGE IFF_LIVE_ADDR_CHANGE -#define IFF_MACVLAN IFF_MACVLAN - #define IF_GET_IFACE 0x0001 /* for querying only */ #define IF_GET_PROTO 0x0002 -- cgit v1.2.2 From f19c29e3e391a66a273e9afebaf01917245148cd Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Mon, 3 Mar 2014 12:31:36 -0800 Subject: tcp: snmp stats for Fast Open, SYN rtx, and data pkts Add the following snmp stats: TCPFastOpenActiveFail: Fast Open attempts (SYN/data) failed beacuse the remote does not accept it or the attempts timed out. TCPSynRetrans: number of SYN and SYN/ACK retransmits to break down retransmissions into SYN, fast-retransmits, timeout retransmits, etc. TCPOrigDataSent: number of outgoing packets with original data (excluding retransmission but including data-in-SYN). This counter is different from TcpOutSegs because TcpOutSegs also tracks pure ACKs. TCPOrigDataSent is more useful to track the TCP retransmission rate. Change TCPFastOpenActive to track only successful Fast Opens to be symmetric to TCPFastOpenPassive. Signed-off-by: Yuchung Cheng Signed-off-by: Eric Dumazet Signed-off-by: Nandita Dukkipati Signed-off-by: Lawrence Brakmo Signed-off-by: David S. Miller --- include/uapi/linux/snmp.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h index 8d64a7e5d371..df40137f33dd 100644 --- a/include/uapi/linux/snmp.h +++ b/include/uapi/linux/snmp.h @@ -252,6 +252,7 @@ enum LINUX_MIB_TCPCHALLENGEACK, /* TCPChallengeACK */ LINUX_MIB_TCPSYNCHALLENGE, /* TCPSYNChallenge */ LINUX_MIB_TCPFASTOPENACTIVE, /* TCPFastOpenActive */ + LINUX_MIB_TCPFASTOPENACTIVEFAIL, /* TCPFastOpenActiveFail */ LINUX_MIB_TCPFASTOPENPASSIVE, /* TCPFastOpenPassive*/ LINUX_MIB_TCPFASTOPENPASSIVEFAIL, /* TCPFastOpenPassiveFail */ LINUX_MIB_TCPFASTOPENLISTENOVERFLOW, /* TCPFastOpenListenOverflow */ @@ -262,6 +263,8 @@ enum LINUX_MIB_TCPFROMZEROWINDOWADV, /* TCPFromZeroWindowAdv */ LINUX_MIB_TCPTOZEROWINDOWADV, /* TCPToZeroWindowAdv */ LINUX_MIB_TCPWANTZEROWINDOWADV, /* TCPWantZeroWindowAdv */ + LINUX_MIB_TCPSYNRETRANS, /* TCPSynRetrans */ + LINUX_MIB_TCPORIGDATASENT, /* TCPOrigDataSent */ __LINUX_MIB_MAX }; -- cgit v1.2.2 From b62faf3cdc875a1ac5a10696cf6ea0b12bab1596 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Mon, 3 Mar 2014 17:23:10 +0100 Subject: if_ether.h: add IEEE 802.21 Ethertype Add the Ethertype for IEEE Std 802.21 - Media Independent Handover Protocol. This Ethertype is used for network control messages. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: David S. Miller --- include/uapi/linux/if_ether.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index ba8b15f07940..750ba67e0dc3 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -89,6 +89,7 @@ #define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ #define ETH_P_TDLS 0x890D /* TDLS */ #define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */ +#define ETH_P_80221 0x8917 /* IEEE 802.21 Media Independent Handover Protocol */ #define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ -- cgit v1.2.2 From f3baa393ffc9a7aefc0bf767729382085e81f606 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Mon, 3 Mar 2014 17:23:11 +0100 Subject: UAPI: add MPLS label stack definition Labels for the Multiprotocol Label Switching are defined in RFC 3032 which was superseded by RFC 5462. Add the definition to UAPI and a stub header for include/linux. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: David S. Miller --- include/uapi/linux/mpls.h | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 include/uapi/linux/mpls.h (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/mpls.h b/include/uapi/linux/mpls.h new file mode 100644 index 000000000000..bc9abfe88c9a --- /dev/null +++ b/include/uapi/linux/mpls.h @@ -0,0 +1,34 @@ +#ifndef _UAPI_MPLS_H +#define _UAPI_MPLS_H + +#include +#include + +/* Reference: RFC 5462, RFC 3032 + * + * 0 1 2 3 + * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * | Label | TC |S| TTL | + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * + * Label: Label Value, 20 bits + * TC: Traffic Class field, 3 bits + * S: Bottom of Stack, 1 bit + * TTL: Time to Live, 8 bits + */ + +struct mpls_label { + __be32 entry; +}; + +#define MPLS_LS_LABEL_MASK 0xFFFFF000 +#define MPLS_LS_LABEL_SHIFT 12 +#define MPLS_LS_TC_MASK 0x00000E00 +#define MPLS_LS_TC_SHIFT 9 +#define MPLS_LS_S_MASK 0x00000100 +#define MPLS_LS_S_SHIFT 8 +#define MPLS_LS_TTL_MASK 0x000000FF +#define MPLS_LS_TTL_SHIFT 0 + +#endif /* _UAPI_MPLS_H */ -- cgit v1.2.2 From 3b02b56cd5988d569731f6c0c26992296e46b758 Mon Sep 17 00:00:00 2001 From: Vytas Dauksa Date: Tue, 17 Dec 2013 14:01:43 +0000 Subject: netfilter: ipset: add hash:ip,mark data type to ipset Introduce packet mark support with new ip,mark hash set. This includes userspace and kernelspace code, hash:ip,mark set tests and man page updates. The intended use of ip,mark set is similar to the ip:port type, but for protocols which don't use a predictable port number. Instead of port number it matches a firewall mark determined by a layer 7 filtering program like opendpi. As well as allowing or blocking traffic it will also be used for accounting packets and bytes sent for each protocol. Signed-off-by: Jozsef Kadlecsik --- include/uapi/linux/netfilter/ipset/ip_set.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/netfilter/ipset/ip_set.h b/include/uapi/linux/netfilter/ipset/ip_set.h index 25d3b2f79c02..5368f8275774 100644 --- a/include/uapi/linux/netfilter/ipset/ip_set.h +++ b/include/uapi/linux/netfilter/ipset/ip_set.h @@ -82,6 +82,7 @@ enum { IPSET_ATTR_PROTO, /* 7 */ IPSET_ATTR_CADT_FLAGS, /* 8 */ IPSET_ATTR_CADT_LINENO = IPSET_ATTR_LINENO, /* 9 */ + IPSET_ATTR_MARK, /* 10 */ /* Reserve empty slots */ IPSET_ATTR_CADT_MAX = 16, /* Create-only specific attributes */ -- cgit v1.2.2 From 4d0e5c076d01d3fb4767a502a9517923fb9a080e Mon Sep 17 00:00:00 2001 From: Vytas Dauksa Date: Tue, 17 Dec 2013 14:01:44 +0000 Subject: netfilter: ipset: add markmask for hash:ip,mark data type Introduce packet mark mask for hash:ip,mark data type. This allows to set mark bit filter for the ip set. Change-Id: Id8dd9ca7e64477c4f7b022a1d9c1a5b187f1c96e Signed-off-by: Jozsef Kadlecsik --- include/uapi/linux/netfilter/ipset/ip_set.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/netfilter/ipset/ip_set.h b/include/uapi/linux/netfilter/ipset/ip_set.h index 5368f8275774..f636f282b142 100644 --- a/include/uapi/linux/netfilter/ipset/ip_set.h +++ b/include/uapi/linux/netfilter/ipset/ip_set.h @@ -89,6 +89,7 @@ enum { IPSET_ATTR_GC, IPSET_ATTR_HASHSIZE, IPSET_ATTR_MAXELEM, + IPSET_ATTR_MARKMASK, IPSET_ATTR_NETMASK, IPSET_ATTR_PROBES, IPSET_ATTR_RESIZE, @@ -138,6 +139,7 @@ enum ipset_errno { IPSET_ERR_EXIST, IPSET_ERR_INVALID_CIDR, IPSET_ERR_INVALID_NETMASK, + IPSET_ERR_INVALID_MARKMASK, IPSET_ERR_INVALID_FAMILY, IPSET_ERR_TIMEOUT, IPSET_ERR_REFERENCED, -- cgit v1.2.2 From af284ece87365f3a69723f5bcc1bcdb505b5eb5d Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Thu, 13 Feb 2014 12:19:56 +0100 Subject: netfilter: ipset: Prepare the kernel for create option flags when no extension is needed Signed-off-by: Jozsef Kadlecsik --- include/uapi/linux/netfilter/ipset/ip_set.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/netfilter/ipset/ip_set.h b/include/uapi/linux/netfilter/ipset/ip_set.h index f636f282b142..a29a378701d2 100644 --- a/include/uapi/linux/netfilter/ipset/ip_set.h +++ b/include/uapi/linux/netfilter/ipset/ip_set.h @@ -188,6 +188,12 @@ enum ipset_cadt_flags { IPSET_FLAG_CADT_MAX = 15, }; +/* The flag bits which correspond to the non-extension create flags */ +enum ipset_create_flags { + IPSET_CREATE_FLAG_NONE = 0, + IPSET_CREATE_FLAG_MAX = 7, +}; + /* Commands with settype-specific attributes */ enum ipset_adt { IPSET_ADD, -- cgit v1.2.2 From 004088768b78f69002f03a341597217eb608fb2c Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Thu, 13 Feb 2014 12:40:59 +0100 Subject: netfilter: ipset: kernel: uapi: fix MARKMASK attr ABI breakage commit 2dfb973c0dcc6d2211 (add markmask for hash:ip,mark data type) inserted IPSET_ATTR_MARKMASK in-between other enum values, i.e. changing values of all further attributes. This causes 'ipset list' segfault on existing kernels since ipset no longer finds IPSET_ATTR_MEMSIZE (it has a different value on kernel side). Jozsef points out it should be moved below IPSET_ATTR_MARK which works since there is some extra reserved space after that value. Signed-off-by: Florian Westphal Signed-off-by: Jozsef Kadlecsik --- include/uapi/linux/netfilter/ipset/ip_set.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/netfilter/ipset/ip_set.h b/include/uapi/linux/netfilter/ipset/ip_set.h index a29a378701d2..a1ca24408206 100644 --- a/include/uapi/linux/netfilter/ipset/ip_set.h +++ b/include/uapi/linux/netfilter/ipset/ip_set.h @@ -83,13 +83,13 @@ enum { IPSET_ATTR_CADT_FLAGS, /* 8 */ IPSET_ATTR_CADT_LINENO = IPSET_ATTR_LINENO, /* 9 */ IPSET_ATTR_MARK, /* 10 */ + IPSET_ATTR_MARKMASK, /* 11 */ /* Reserve empty slots */ IPSET_ATTR_CADT_MAX = 16, /* Create-only specific attributes */ IPSET_ATTR_GC, IPSET_ATTR_HASHSIZE, IPSET_ATTR_MAXELEM, - IPSET_ATTR_MARKMASK, IPSET_ATTR_NETMASK, IPSET_ATTR_PROBES, IPSET_ATTR_RESIZE, @@ -139,7 +139,6 @@ enum ipset_errno { IPSET_ERR_EXIST, IPSET_ERR_INVALID_CIDR, IPSET_ERR_INVALID_NETMASK, - IPSET_ERR_INVALID_MARKMASK, IPSET_ERR_INVALID_FAMILY, IPSET_ERR_TIMEOUT, IPSET_ERR_REFERENCED, @@ -147,6 +146,7 @@ enum ipset_errno { IPSET_ERR_IPADDR_IPV6, IPSET_ERR_COUNTER, IPSET_ERR_COMMENT, + IPSET_ERR_INVALID_MARKMASK, /* Type specific error codes */ IPSET_ERR_TYPE_SPECIFIC = 4352, -- cgit v1.2.2 From 07cf8f5ae2657ac495b906c68ff3441ff8ba80ba Mon Sep 17 00:00:00 2001 From: Josh Hunt Date: Fri, 28 Feb 2014 22:14:57 -0500 Subject: netfilter: ipset: add forceadd kernel support for hash set types Adds a new property for hash set types, where if a set is created with the 'forceadd' option and the set becomes full the next addition to the set may succeed and evict a random entry from the set. To keep overhead low eviction is done very simply. It checks to see which bucket the new entry would be added. If the bucket's pos value is non-zero (meaning there's at least one entry in the bucket) it replaces the first entry in the bucket. If pos is zero, then it continues down the normal add process. This property is useful if you have a set for 'ban' lists where it may not matter if you release some entries from the set early. Signed-off-by: Josh Hunt Signed-off-by: Jozsef Kadlecsik --- include/uapi/linux/netfilter/ipset/ip_set.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/netfilter/ipset/ip_set.h b/include/uapi/linux/netfilter/ipset/ip_set.h index a1ca24408206..78c2f2e79920 100644 --- a/include/uapi/linux/netfilter/ipset/ip_set.h +++ b/include/uapi/linux/netfilter/ipset/ip_set.h @@ -185,13 +185,16 @@ enum ipset_cadt_flags { IPSET_FLAG_WITH_COUNTERS = (1 << IPSET_FLAG_BIT_WITH_COUNTERS), IPSET_FLAG_BIT_WITH_COMMENT = 4, IPSET_FLAG_WITH_COMMENT = (1 << IPSET_FLAG_BIT_WITH_COMMENT), + IPSET_FLAG_BIT_WITH_FORCEADD = 5, + IPSET_FLAG_WITH_FORCEADD = (1 << IPSET_FLAG_BIT_WITH_FORCEADD), IPSET_FLAG_CADT_MAX = 15, }; /* The flag bits which correspond to the non-extension create flags */ enum ipset_create_flags { - IPSET_CREATE_FLAG_NONE = 0, - IPSET_CREATE_FLAG_MAX = 7, + IPSET_CREATE_FLAG_BIT_FORCEADD = 0, + IPSET_CREATE_FLAG_FORCEADD = (1 << IPSET_CREATE_FLAG_BIT_FORCEADD), + IPSET_CREATE_FLAG_BIT_MAX = 7, }; /* Commands with settype-specific attributes */ -- cgit v1.2.2 From 870a2df4ca026817eb87bb2f9daaa60a93fd051a Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Thu, 6 Mar 2014 18:24:29 +0100 Subject: xfrm: rename struct xfrm_filter iproute2 already defines a structure with that name, let's use another one to avoid any conflict. CC: Stephen Hemminger Signed-off-by: Nicolas Dichtel Signed-off-by: Steffen Klassert --- include/uapi/linux/xfrm.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h index 6550c679584f..25e5dd916ba4 100644 --- a/include/uapi/linux/xfrm.h +++ b/include/uapi/linux/xfrm.h @@ -299,7 +299,7 @@ enum xfrm_attr_type_t { XFRMA_REPLAY_ESN_VAL, /* struct xfrm_replay_esn */ XFRMA_SA_EXTRA_FLAGS, /* __u32 */ XFRMA_PROTO, /* __u8 */ - XFRMA_FILTER, /* struct xfrm_filter */ + XFRMA_ADDRESS_FILTER, /* struct xfrm_address_filter */ __XFRMA_MAX #define XFRMA_MAX (__XFRMA_MAX - 1) @@ -476,7 +476,7 @@ struct xfrm_user_mapping { __be16 new_sport; }; -struct xfrm_filter { +struct xfrm_address_filter { xfrm_address_t saddr; xfrm_address_t daddr; __u16 family; -- cgit v1.2.2 From 9859ccd2c8be63ce939522e63e265f2b0caa1109 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Fri, 28 Feb 2014 16:36:23 +0100 Subject: can: introduce the data bitrate configuration for CAN FD As CAN FD offers a second bitrate for the data section of the CAN frame the infrastructure for storing and configuring this second bitrate is introduced. Improved the readability of the if-statement by inserting some newlines. Signed-off-by: Oliver Hartkopp Acked-by: Stephane Grosjean Signed-off-by: Marc Kleine-Budde --- include/uapi/linux/can/netlink.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/can/netlink.h b/include/uapi/linux/can/netlink.h index df944ed206a8..b41933d6bdcd 100644 --- a/include/uapi/linux/can/netlink.h +++ b/include/uapi/linux/can/netlink.h @@ -122,6 +122,8 @@ enum { IFLA_CAN_RESTART_MS, IFLA_CAN_RESTART, IFLA_CAN_BERR_COUNTER, + IFLA_CAN_DATA_BITTIMING, + IFLA_CAN_DATA_BITTIMING_CONST, __IFLA_CAN_MAX }; -- cgit v1.2.2 From bc05a8944a344acdb81a65de055ca6febbf9657c Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Fri, 28 Feb 2014 16:36:24 +0100 Subject: can: allow to change the device mtu for CAN FD capable devices The configuration for CAN FD depends on CAN_CTRLMODE_FD enabled in the driver specific ctrlmode_supported capabilities. The configuration can be done either with the 'fd { on | off }' option in the 'ip' tool from iproute2 or by setting the CAN netdevice MTU to CAN_MTU (16) or to CANFD_MTU (72). Signed-off-by: Oliver Hartkopp Acked-by: Stephane Grosjean Signed-off-by: Marc Kleine-Budde --- include/uapi/linux/can/netlink.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/can/netlink.h b/include/uapi/linux/can/netlink.h index b41933d6bdcd..7e2e1863db16 100644 --- a/include/uapi/linux/can/netlink.h +++ b/include/uapi/linux/can/netlink.h @@ -96,6 +96,7 @@ struct can_ctrlmode { #define CAN_CTRLMODE_3_SAMPLES 0x04 /* Triple sampling mode */ #define CAN_CTRLMODE_ONE_SHOT 0x08 /* One-Shot mode */ #define CAN_CTRLMODE_BERR_REPORTING 0x10 /* Bus-error reporting */ +#define CAN_CTRLMODE_FD 0x20 /* CAN FD mode */ /* * CAN device statistics -- cgit v1.2.2 From 61ccbb684421d374fdcd7cf5d6b024b06f03ce4e Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Thu, 13 Mar 2014 12:41:57 +0100 Subject: ether: add loopback type ETH_P_LOOPBACK Per IEEE 802.3*, the correct packet type for loopback 0x9000. There's already one ETH_P_LOOP 0x0060, which has been there for ages, however it's plainly wrong as anything that small is considered a length field. We can't remove it because legacy, so add a new type which corresponds to the correct id. http://www.iana.org/assignments/ieee-802-numbers/ieee-802-numbers.xhtml CC: "David S. Miller" CC: Stefan Richter CC: Simon Wunderlich CC: Neil Jerram CC: Simon Horman CC: Arvid Brodin Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller --- include/uapi/linux/if_ether.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index 750ba67e0dc3..0f8210b8e0bc 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -90,6 +90,7 @@ #define ETH_P_TDLS 0x890D /* TDLS */ #define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */ #define ETH_P_80221 0x8917 /* IEEE 802.21 Media Independent Handover Protocol */ +#define ETH_P_LOOPBACK 0x9000 /* Ethernet loopback packet, per IEEE 802.3 */ #define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ -- cgit v1.2.2 From bfe9b3f8c5229e5de4fd18e941866bc410d16334 Mon Sep 17 00:00:00 2001 From: Ben Chan Date: Wed, 19 Mar 2014 14:00:05 -0700 Subject: USB: cdc: add MBIM extended functional descriptor structure This patch adds the MBIM extended functional descriptor structure defined in "Universal Serial Bus Communications Class Subclass Specification for Mobile Broadband Interface Model, Revision 1.0, Errata-1" published by USB-IF. Signed-off-by: Ben Chan Acked-by: Greg Kroah-Hartman Signed-off-by: David S. Miller --- include/uapi/linux/usb/cdc.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/usb/cdc.h b/include/uapi/linux/usb/cdc.h index f35aa0a338c7..b6a9cdd6e096 100644 --- a/include/uapi/linux/usb/cdc.h +++ b/include/uapi/linux/usb/cdc.h @@ -56,6 +56,7 @@ #define USB_CDC_OBEX_TYPE 0x15 #define USB_CDC_NCM_TYPE 0x1a #define USB_CDC_MBIM_TYPE 0x1b +#define USB_CDC_MBIM_EXTENDED_TYPE 0x1c /* "Header Functional Descriptor" from CDC spec 5.2.3.1 */ struct usb_cdc_header_desc { @@ -205,6 +206,17 @@ struct usb_cdc_mbim_desc { __u8 bmNetworkCapabilities; } __attribute__ ((packed)); +/* "MBIM Extended Functional Descriptor" from CDC MBIM spec 1.0 errata-1 */ +struct usb_cdc_mbim_extended_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdMBIMExtendedVersion; + __u8 bMaxOutstandingCommandMessages; + __le16 wMTU; +} __attribute__ ((packed)); + /*-------------------------------------------------------------------------*/ /* -- cgit v1.2.2 From 6092315dfdec5185881605d15a0e200d6e90eb66 Mon Sep 17 00:00:00 2001 From: Richard Cochran Date: Thu, 20 Mar 2014 22:21:52 +0100 Subject: ptp: introduce programmable pins. This patch adds a pair of new ioctls to the PTP Hardware Clock device interface. Using the ioctls, user space programs can query each pin to find out its current function and also reprogram a different function if desired. Signed-off-by: Richard Cochran Signed-off-by: David S. Miller --- include/uapi/linux/ptp_clock.h | 39 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 38 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ptp_clock.h b/include/uapi/linux/ptp_clock.h index b65c834f83e9..f0b7bfe5da92 100644 --- a/include/uapi/linux/ptp_clock.h +++ b/include/uapi/linux/ptp_clock.h @@ -50,7 +50,8 @@ struct ptp_clock_caps { int n_ext_ts; /* Number of external time stamp channels. */ int n_per_out; /* Number of programmable periodic signals. */ int pps; /* Whether the clock supports a PPS callback. */ - int rsv[15]; /* Reserved for future use. */ + int n_pins; /* Number of input/output pins. */ + int rsv[14]; /* Reserved for future use. */ }; struct ptp_extts_request { @@ -80,6 +81,40 @@ struct ptp_sys_offset { struct ptp_clock_time ts[2 * PTP_MAX_SAMPLES + 1]; }; +enum ptp_pin_function { + PTP_PF_NONE, + PTP_PF_EXTTS, + PTP_PF_PEROUT, + PTP_PF_PHYSYNC, +}; + +struct ptp_pin_desc { + /* + * Hardware specific human readable pin name. This field is + * set by the kernel during the PTP_PIN_GETFUNC ioctl and is + * ignored for the PTP_PIN_SETFUNC ioctl. + */ + char name[64]; + /* + * Pin index in the range of zero to ptp_clock_caps.n_pins - 1. + */ + unsigned int index; + /* + * Which of the PTP_PF_xxx functions to use on this pin. + */ + unsigned int func; + /* + * The specific channel to use for this function. + * This corresponds to the 'index' field of the + * PTP_EXTTS_REQUEST and PTP_PEROUT_REQUEST ioctls. + */ + unsigned int chan; + /* + * Reserved for future use. + */ + unsigned int rsv[5]; +}; + #define PTP_CLK_MAGIC '=' #define PTP_CLOCK_GETCAPS _IOR(PTP_CLK_MAGIC, 1, struct ptp_clock_caps) @@ -87,6 +122,8 @@ struct ptp_sys_offset { #define PTP_PEROUT_REQUEST _IOW(PTP_CLK_MAGIC, 3, struct ptp_perout_request) #define PTP_ENABLE_PPS _IOW(PTP_CLK_MAGIC, 4, int) #define PTP_SYS_OFFSET _IOW(PTP_CLK_MAGIC, 5, struct ptp_sys_offset) +#define PTP_PIN_GETFUNC _IOWR(PTP_CLK_MAGIC, 6, struct ptp_pin_desc) +#define PTP_PIN_SETFUNC _IOW(PTP_CLK_MAGIC, 7, struct ptp_pin_desc) struct ptp_extts_event { struct ptp_clock_time t; /* Time event occured. */ -- cgit v1.2.2 From 339e022396d58f4b4f9b4200ea5309768934bb33 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 28 Mar 2014 14:25:58 -0700 Subject: net: export NET_ADDR_* values to user-space API NET_ADDR_* values are exported in the /sys/class/net//addr_assign_type sysfs attributes, and as such constitutes an user-space ABI. Move the NET_ADDR_* definitions from include/linux/netdevice.h to include/uapi/linux/netdevice.h Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- include/uapi/linux/netdevice.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/netdevice.h b/include/uapi/linux/netdevice.h index 6b9500bc2d56..fdfbd1c17065 100644 --- a/include/uapi/linux/netdevice.h +++ b/include/uapi/linux/netdevice.h @@ -49,5 +49,11 @@ enum { IF_PORT_100BASEFX }; +/* hardware address assignment types */ +#define NET_ADDR_PERM 0 /* address is permanent (default) */ +#define NET_ADDR_RANDOM 1 /* address is generated randomly */ +#define NET_ADDR_STOLEN 2 /* address is stolen from other device */ +#define NET_ADDR_SET 3 /* address is set using + * dev_set_mac_address() */ #endif /* _UAPI_LINUX_NETDEVICE_H */ -- cgit v1.2.2 From 2d3b479df41a10e2f41f9259fcba775bd34de6e4 Mon Sep 17 00:00:00 2001 From: david decotigny Date: Sat, 29 Mar 2014 09:48:35 -0700 Subject: net-sysfs: expose number of carrier on/off changes This allows to monitor carrier on/off transitions and detect link flapping issues: - new /sys/class/net/X/carrier_changes - new rtnetlink IFLA_CARRIER_CHANGES (getlink) Tested: - grep . /sys/class/net/*/carrier_changes + ip link set dev X down/up + plug/unplug cable - updated iproute2: prints IFLA_CARRIER_CHANGES - iproute2 20121211-2 (debian): unchanged behavior Signed-off-by: David Decotigny Signed-off-by: David S. Miller --- include/uapi/linux/if_link.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 16410b6e7819..9a7f7ace6649 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -144,6 +144,7 @@ enum { IFLA_NUM_RX_QUEUES, IFLA_CARRIER, IFLA_PHYS_PORT_ID, + IFLA_CARRIER_CHANGES, __IFLA_MAX }; -- cgit v1.2.2