From 50ac6607845755e594c8a39b9c6a00d1c9b48ea4 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 25 Jun 2013 19:03:56 -0700 Subject: cfg80211/nl80211: rename packet pattern related structures and enums Currently packet patterns and it's enum/structures are used only for WoWLAN feature. As we intend to reuse them for new feature packet coalesce, they are renamed in this patch. Older names are kept for backward compatibility purpose. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 45 ++++++++++++++++++++++++++------------------ 1 file changed, 27 insertions(+), 18 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 861e5eba3953..de0ce809068a 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3060,11 +3060,11 @@ enum nl80211_tx_power_setting { }; /** - * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute - * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute - * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has + * enum nl80211_packet_pattern_attr - packet pattern attribute + * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute + * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has * a zero bit are ignored - * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have + * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have * a bit for each byte in the pattern. The lowest-order bit corresponds * to the first byte of the pattern, but the bytes of the pattern are * in a little-endian-like format, i.e. the 9th byte of the pattern @@ -3075,23 +3075,23 @@ enum nl80211_tx_power_setting { * Note that the pattern matching is done as though frames were not * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked * first (including SNAP header unpacking) and then matched. - * @NL80211_WOWLAN_PKTPAT_OFFSET: packet offset, pattern is matched after + * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after * these fixed number of bytes of received packet - * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes - * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number + * @NUM_NL80211_PKTPAT: number of attributes + * @MAX_NL80211_PKTPAT: max attribute number */ -enum nl80211_wowlan_packet_pattern_attr { - __NL80211_WOWLAN_PKTPAT_INVALID, - NL80211_WOWLAN_PKTPAT_MASK, - NL80211_WOWLAN_PKTPAT_PATTERN, - NL80211_WOWLAN_PKTPAT_OFFSET, +enum nl80211_packet_pattern_attr { + __NL80211_PKTPAT_INVALID, + NL80211_PKTPAT_MASK, + NL80211_PKTPAT_PATTERN, + NL80211_PKTPAT_OFFSET, - NUM_NL80211_WOWLAN_PKTPAT, - MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1, + NUM_NL80211_PKTPAT, + MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1, }; /** - * struct nl80211_wowlan_pattern_support - pattern support information + * struct nl80211_pattern_support - packet pattern support information * @max_patterns: maximum number of patterns supported * @min_pattern_len: minimum length of each pattern * @max_pattern_len: maximum length of each pattern @@ -3101,13 +3101,22 @@ enum nl80211_wowlan_packet_pattern_attr { * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the * capability information given by the kernel to userspace. */ -struct nl80211_wowlan_pattern_support { +struct nl80211_pattern_support { __u32 max_patterns; __u32 min_pattern_len; __u32 max_pattern_len; __u32 max_pkt_offset; } __attribute__((packed)); +/* only for backward compatibility */ +#define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID +#define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK +#define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN +#define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET +#define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT +#define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT +#define nl80211_wowlan_pattern_support nl80211_pattern_support + /** * enum nl80211_wowlan_triggers - WoWLAN trigger definitions * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes @@ -3127,7 +3136,7 @@ struct nl80211_wowlan_pattern_support { * pattern matching is done after the packet is converted to the MSDU. * * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute - * carrying a &struct nl80211_wowlan_pattern_support. + * carrying a &struct nl80211_pattern_support. * * When reporting wakeup. it is a u32 attribute containing the 0-based * index of the pattern that caused the wakeup, in the patterns passed @@ -3284,7 +3293,7 @@ struct nl80211_wowlan_tcp_data_token_feature { * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a * u32 attribute holding the maximum length * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for - * feature advertising. The mask works like @NL80211_WOWLAN_PKTPAT_MASK + * feature advertising. The mask works like @NL80211_PKTPAT_MASK * but on the TCP payload only. * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes * @MAX_NL80211_WOWLAN_TCP: highest attribute number -- cgit v1.2.2 From be29b99a9b51b0338eea3c66a58de53bbd01de24 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Fri, 28 Jun 2013 11:51:26 -0700 Subject: cfg80211/nl80211: Add packet coalesce support In most cases, host that receives IPv4 and IPv6 multicast/broadcast packets does not do anything with these packets. Therefore the reception of these unwanted packets causes unnecessary processing and power consumption. Packet coalesce feature helps to reduce number of received interrupts to host by buffering these packets in firmware/hardware for some predefined time. Received interrupt will be generated when one of the following events occur. a) Expiration of hardware timer whose expiration time is set to maximum coalescing delay of matching coalesce rule. b) Coalescing buffer in hardware reaches it's limit. c) Packet doesn't match any of the configured coalesce rules. This patch adds set/get configuration support for packet coalesce. User needs to configure following parameters for creating a coalesce rule. a) Maximum coalescing delay b) List of packet patterns which needs to be matched c) Condition for coalescence. pattern 'match' or 'no match' Multiple such rules can be created. This feature needs to be advertised during driver initialization. Drivers are supposed to do required firmware/hardware settings based on user configuration. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao [fix kernel-doc, change free function, fix copy/paste error] Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 90 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 88 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index de0ce809068a..5abc54d14d4d 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -125,6 +125,31 @@ * interfaces that a given device supports. */ +/** + * DOC: packet coalesce support + * + * In most cases, host that receives IPv4 and IPv6 multicast/broadcast + * packets does not do anything with these packets. Therefore the + * reception of these unwanted packets causes unnecessary processing + * and power consumption. + * + * Packet coalesce feature helps to reduce number of received interrupts + * to host by buffering these packets in firmware/hardware for some + * predefined time. Received interrupt will be generated when one of the + * following events occur. + * a) Expiration of hardware timer whose expiration time is set to maximum + * coalescing delay of matching coalesce rule. + * b) Coalescing buffer in hardware reaches it's limit. + * c) Packet doesn't match any of the configured coalesce rules. + * + * User needs to configure following parameters for creating a coalesce + * rule. + * a) Maximum coalescing delay + * b) List of packet patterns which needs to be matched + * c) Condition for coalescence. pattern 'match' or 'no match' + * Multiple such rules can be created. + */ + /** * enum nl80211_commands - supported nl80211 commands * @@ -648,6 +673,9 @@ * @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can * return back to normal. * + * @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules. + * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -810,6 +838,9 @@ enum nl80211_commands { NL80211_CMD_CRIT_PROTOCOL_START, NL80211_CMD_CRIT_PROTOCOL_STOP, + NL80211_CMD_GET_COALESCE, + NL80211_CMD_SET_COALESCE, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1436,6 +1467,8 @@ enum nl80211_commands { * allowed to be used with the first @NL80211_CMD_SET_STATION command to * update a TDLS peer STA entry. * + * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1736,6 +1769,8 @@ enum nl80211_attrs { NL80211_ATTR_PEER_AID, + NL80211_ATTR_COALESCE_RULE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3098,8 +3133,10 @@ enum nl80211_packet_pattern_attr { * @max_pkt_offset: maximum Rx packet offset * * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when - * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the - * capability information given by the kernel to userspace. + * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED or in + * %NL80211_ATTR_COALESCE_RULE_PKT_PATTERN when that is part of + * %NL80211_ATTR_COALESCE_RULE in the capability information given + * by the kernel to userspace. */ struct nl80211_pattern_support { __u32 max_patterns; @@ -3317,6 +3354,55 @@ enum nl80211_wowlan_tcp_attrs { MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1 }; +/** + * struct nl80211_coalesce_rule_support - coalesce rule support information + * @max_rules: maximum number of rules supported + * @pat: packet pattern support information + * @max_delay: maximum supported coalescing delay in msecs + * + * This struct is carried in %NL80211_ATTR_COALESCE_RULE in the + * capability information given by the kernel to userspace. + */ +struct nl80211_coalesce_rule_support { + __u32 max_rules; + struct nl80211_pattern_support pat; + __u32 max_delay; +} __attribute__((packed)); + +/** + * enum nl80211_attr_coalesce_rule - coalesce rule attribute + * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute + * @NL80211_ATTR_COALESCE_RULE_DELAY: delay in msecs used for packet coalescing + * @NL80211_ATTR_COALESCE_RULE_CONDITION: condition for packet coalescence, + * see &enum nl80211_coalesce_condition. + * @NL80211_ATTR_COALESCE_RULE_PKT_PATTERN: packet offset, pattern is matched + * after these fixed number of bytes of received packet + * @NUM_NL80211_ATTR_COALESCE_RULE: number of attributes + * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number + */ +enum nl80211_attr_coalesce_rule { + __NL80211_COALESCE_RULE_INVALID, + NL80211_ATTR_COALESCE_RULE_DELAY, + NL80211_ATTR_COALESCE_RULE_CONDITION, + NL80211_ATTR_COALESCE_RULE_PKT_PATTERN, + + /* keep last */ + NUM_NL80211_ATTR_COALESCE_RULE, + NL80211_ATTR_COALESCE_RULE_MAX = NUM_NL80211_ATTR_COALESCE_RULE - 1 +}; + +/** + * enum nl80211_coalesce_condition - coalesce rule conditions + * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns + * in a rule are matched. + * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns + * in a rule are not matched. + */ +enum nl80211_coalesce_condition { + NL80211_COALESCE_CONDITION_MATCH, + NL80211_COALESCE_CONDITION_NO_MATCH +}; + /** * enum nl80211_iface_limit_attrs - limit attributes * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) -- cgit v1.2.2 From dcd6eac1f3b5fa1df11dfa99da0cf75b76cfef97 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Mon, 8 Jul 2013 16:55:49 +0200 Subject: nl80211: add scan width to bss and scan request structs To allow scanning and working with 5 MHz and 10 MHz BSS, extend the inform bss commands and add wrappers to take 5 and 10 MHz bss into account. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 5abc54d14d4d..eb68735b3318 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2807,6 +2807,21 @@ enum nl80211_chan_width { NL80211_CHAN_WIDTH_10, }; +/** + * enum nl80211_bss_scan_width - control channel width for a BSS + * + * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute. + * + * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible + * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide + * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide + */ +enum nl80211_bss_scan_width { + NL80211_BSS_CHAN_WIDTH_20, + NL80211_BSS_CHAN_WIDTH_10, + NL80211_BSS_CHAN_WIDTH_5, +}; + /** * enum nl80211_bss - netlink attributes for a BSS * @@ -2831,6 +2846,8 @@ enum nl80211_chan_width { * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information * elements from a Beacon frame (bin); not present if no Beacon frame has * yet been received + * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel + * (u32, enum nl80211_bss_scan_width) * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -2847,6 +2864,7 @@ enum nl80211_bss { NL80211_BSS_STATUS, NL80211_BSS_SEEN_MS_AGO, NL80211_BSS_BEACON_IES, + NL80211_BSS_CHAN_WIDTH, /* keep last */ __NL80211_BSS_AFTER_LAST, -- cgit v1.2.2 From eda297729171fe16bf34fe5b0419dfb69060f623 Mon Sep 17 00:00:00 2001 From: Richard Cochran Date: Fri, 19 Jul 2013 19:40:10 +0200 Subject: tun: Support software transmit time stamping. This patch adds transmit time stamping to the tun/tap driver. Similar support already exists for UDP, can, and raw packets. Signed-off-by: Richard Cochran Signed-off-by: David S. Miller --- include/uapi/linux/if_tun.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_tun.h b/include/uapi/linux/if_tun.h index 82334f88967e..1870ee29bb37 100644 --- a/include/uapi/linux/if_tun.h +++ b/include/uapi/linux/if_tun.h @@ -71,6 +71,9 @@ /* read-only flag */ #define IFF_PERSIST 0x0800 +/* Socket options */ +#define TUN_TX_TIMESTAMP 1 + /* Features for GSO (TUNSETOFFLOAD). */ #define TUN_F_CSUM 0x01 /* You can hand me unchecksummed packets. */ #define TUN_F_TSO4 0x02 /* I can handle TSO for IPv4 packets */ -- cgit v1.2.2 From a5cdd40c9877e9aba704c020fd65d26b5cfecf18 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 16 Jul 2013 17:09:07 +0200 Subject: perf: Update perf_event_type documentation Due to a discussion with Adrian I had a good look at the perf_event_type record layout and found the documentation to be somewhat unclear. Cc: Adrian Hunter Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20130716150907.GL23818@dyad.programming.kicks-ass.net Signed-off-by: Ingo Molnar --- include/uapi/linux/perf_event.h | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index 0b1df41691e8..00d8274730b4 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -478,6 +478,16 @@ enum perf_event_type { * file will be supported by older perf tools, with these new optional * fields being ignored. * + * struct sample_id { + * { u32 pid, tid; } && PERF_SAMPLE_TID + * { u64 time; } && PERF_SAMPLE_TIME + * { u64 id; } && PERF_SAMPLE_ID + * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID + * { u32 cpu, res; } && PERF_SAMPLE_CPU + * } && perf_event_attr::sample_id_all + */ + + /* * The MMAP events record the PROT_EXEC mappings so that we can * correlate userspace IPs to code. They have the following structure: * @@ -498,6 +508,7 @@ enum perf_event_type { * struct perf_event_header header; * u64 id; * u64 lost; + * struct sample_id sample_id; * }; */ PERF_RECORD_LOST = 2, @@ -508,6 +519,7 @@ enum perf_event_type { * * u32 pid, tid; * char comm[]; + * struct sample_id sample_id; * }; */ PERF_RECORD_COMM = 3, @@ -518,6 +530,7 @@ enum perf_event_type { * u32 pid, ppid; * u32 tid, ptid; * u64 time; + * struct sample_id sample_id; * }; */ PERF_RECORD_EXIT = 4, @@ -528,6 +541,7 @@ enum perf_event_type { * u64 time; * u64 id; * u64 stream_id; + * struct sample_id sample_id; * }; */ PERF_RECORD_THROTTLE = 5, @@ -539,6 +553,7 @@ enum perf_event_type { * u32 pid, ppid; * u32 tid, ptid; * u64 time; + * struct sample_id sample_id; * }; */ PERF_RECORD_FORK = 7, @@ -549,6 +564,7 @@ enum perf_event_type { * u32 pid, tid; * * struct read_format values; + * struct sample_id sample_id; * }; */ PERF_RECORD_READ = 8, @@ -596,7 +612,7 @@ enum perf_event_type { * u64 dyn_size; } && PERF_SAMPLE_STACK_USER * * { u64 weight; } && PERF_SAMPLE_WEIGHT - * { u64 data_src; } && PERF_SAMPLE_DATA_SRC + * { u64 data_src; } && PERF_SAMPLE_DATA_SRC * }; */ PERF_RECORD_SAMPLE = 9, -- cgit v1.2.2 From 860f085b74e9f0075de8140ed3a1e5b5e3e39aa8 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 28 Jun 2013 16:22:17 +0300 Subject: perf: Fix broken union in 'struct perf_event_mmap_page' The capabilities bits must not be "union'ed" together. Put them in a separate struct. Signed-off-by: Adrian Hunter Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1372425741-1676-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Ingo Molnar --- include/uapi/linux/perf_event.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index 00d8274730b4..0041aedf2297 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -375,9 +375,11 @@ struct perf_event_mmap_page { __u64 time_running; /* time event on cpu */ union { __u64 capabilities; - __u64 cap_usr_time : 1, - cap_usr_rdpmc : 1, - cap_____res : 62; + struct { + __u64 cap_usr_time : 1, + cap_usr_rdpmc : 1, + cap_____res : 62; + }; }; /* -- cgit v1.2.2 From c73deb6aecda2955716f31572516f09d930ef450 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 28 Jun 2013 16:22:18 +0300 Subject: perf/x86: Add ability to calculate TSC from perf sample timestamps For modern CPUs, perf clock is directly related to TSC. TSC can be calculated from perf clock and vice versa using a simple calculation. Two of the three componenets of that calculation are already exported in struct perf_event_mmap_page. This patch exports the third. Signed-off-by: Adrian Hunter Signed-off-by: Peter Zijlstra Cc: "H. Peter Anvin" Link: http://lkml.kernel.org/r/1372425741-1676-3-git-send-email-adrian.hunter@intel.com Signed-off-by: Ingo Molnar --- include/uapi/linux/perf_event.h | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index 0041aedf2297..efef1d37a371 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -378,7 +378,8 @@ struct perf_event_mmap_page { struct { __u64 cap_usr_time : 1, cap_usr_rdpmc : 1, - cap_____res : 62; + cap_usr_time_zero : 1, + cap_____res : 61; }; }; @@ -420,12 +421,29 @@ struct perf_event_mmap_page { __u16 time_shift; __u32 time_mult; __u64 time_offset; + /* + * If cap_usr_time_zero, the hardware clock (e.g. TSC) can be calculated + * from sample timestamps. + * + * time = timestamp - time_zero; + * quot = time / time_mult; + * rem = time % time_mult; + * cyc = (quot << time_shift) + (rem << time_shift) / time_mult; + * + * And vice versa: + * + * quot = cyc >> time_shift; + * rem = cyc & ((1 << time_shift) - 1); + * timestamp = time_zero + quot * time_mult + + * ((rem * time_mult) >> time_shift); + */ + __u64 time_zero; /* * Hole for extension of the self monitor capabilities */ - __u64 __reserved[120]; /* align to 1k */ + __u64 __reserved[119]; /* align to 1k */ /* * Control data for the mmap() data buffer. -- cgit v1.2.2 From 91705c61b52029ab5da67a15a23eef08667bf40e Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Tue, 23 Jul 2013 14:51:47 +0200 Subject: net: sctp: trivial: update mailing list address The SCTP mailing list address to send patches or questions to is linux-sctp@vger.kernel.org and not lksctp-developers@lists.sourceforge.net anymore. Therefore, update all occurences. Signed-off-by: Daniel Borkmann Acked-by: Neil Horman Acked-by: Vlad Yasevich Signed-off-by: David S. Miller --- include/uapi/linux/sctp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h index 66b466e4ca08..ca451e99b28b 100644 --- a/include/uapi/linux/sctp.h +++ b/include/uapi/linux/sctp.h @@ -28,7 +28,7 @@ * * Please send any bug reports or fixes you make to the * email address(es): - * lksctp developers + * lksctp developers * * Or submit a bug report through the following website: * http://www.sf.net/projects/lksctp -- cgit v1.2.2 From c9bee3b7fdecb0c1d070c7b54113b3bdfb9a3d36 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 22 Jul 2013 20:27:07 -0700 Subject: tcp: TCP_NOTSENT_LOWAT socket option Idea of this patch is to add optional limitation of number of unsent bytes in TCP sockets, to reduce usage of kernel memory. TCP receiver might announce a big window, and TCP sender autotuning might allow a large amount of bytes in write queue, but this has little performance impact if a large part of this buffering is wasted : Write queue needs to be large only to deal with large BDP, not necessarily to cope with scheduling delays (incoming ACKS make room for the application to queue more bytes) For most workloads, using a value of 128 KB or less is OK to give applications enough time to react to POLLOUT events in time (or being awaken in a blocking sendmsg()) This patch adds two ways to set the limit : 1) Per socket option TCP_NOTSENT_LOWAT 2) A sysctl (/proc/sys/net/ipv4/tcp_notsent_lowat) for sockets not using TCP_NOTSENT_LOWAT socket option (or setting a zero value) Default value being UINT_MAX (0xFFFFFFFF), meaning this has no effect. This changes poll()/select()/epoll() to report POLLOUT only if number of unsent bytes is below tp->nosent_lowat Note this might increase number of sendmsg()/sendfile() calls when using non blocking sockets, and increase number of context switches for blocking sockets. Note this is not related to SO_SNDLOWAT (as SO_SNDLOWAT is defined as : Specify the minimum number of bytes in the buffer until the socket layer will pass the data to the protocol) Tested: netperf sessions, and watching /proc/net/protocols "memory" column for TCP With 200 concurrent netperf -t TCP_STREAM sessions, amount of kernel memory used by TCP buffers shrinks by ~55 % (20567 pages instead of 45458) lpq83:~# echo -1 >/proc/sys/net/ipv4/tcp_notsent_lowat lpq83:~# (super_netperf 200 -t TCP_STREAM -H remote -l 90 &); sleep 60 ; grep TCP /proc/net/protocols TCPv6 1880 2 45458 no 208 yes ipv6 y y y y y y y y y y y y y n y y y y y TCP 1696 508 45458 no 208 yes kernel y y y y y y y y y y y y y n y y y y y lpq83:~# echo 131072 >/proc/sys/net/ipv4/tcp_notsent_lowat lpq83:~# (super_netperf 200 -t TCP_STREAM -H remote -l 90 &); sleep 60 ; grep TCP /proc/net/protocols TCPv6 1880 2 20567 no 208 yes ipv6 y y y y y y y y y y y y y n y y y y y TCP 1696 508 20567 no 208 yes kernel y y y y y y y y y y y y y n y y y y y Using 128KB has no bad effect on the throughput or cpu usage of a single flow, although there is an increase of context switches. A bonus is that we hold socket lock for a shorter amount of time and should improve latencies of ACK processing. lpq83:~# echo -1 >/proc/sys/net/ipv4/tcp_notsent_lowat lpq83:~# perf stat -e context-switches ./netperf -H 7.7.7.84 -t omni -l 20 -c -i10,3 OMNI Send TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.7.84 () port 0 AF_INET : +/-2.500% @ 99% conf. Local Remote Local Elapsed Throughput Throughput Local Local Remote Remote Local Remote Service Send Socket Recv Socket Send Time Units CPU CPU CPU CPU Service Service Demand Size Size Size (sec) Util Util Util Util Demand Demand Units Final Final % Method % Method 1651584 6291456 16384 20.00 17447.90 10^6bits/s 3.13 S -1.00 U 0.353 -1.000 usec/KB Performance counter stats for './netperf -H 7.7.7.84 -t omni -l 20 -c -i10,3': 412,514 context-switches 200.034645535 seconds time elapsed lpq83:~# echo 131072 >/proc/sys/net/ipv4/tcp_notsent_lowat lpq83:~# perf stat -e context-switches ./netperf -H 7.7.7.84 -t omni -l 20 -c -i10,3 OMNI Send TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.7.84 () port 0 AF_INET : +/-2.500% @ 99% conf. Local Remote Local Elapsed Throughput Throughput Local Local Remote Remote Local Remote Service Send Socket Recv Socket Send Time Units CPU CPU CPU CPU Service Service Demand Size Size Size (sec) Util Util Util Util Demand Demand Units Final Final % Method % Method 1593240 6291456 16384 20.00 17321.16 10^6bits/s 3.35 S -1.00 U 0.381 -1.000 usec/KB Performance counter stats for './netperf -H 7.7.7.84 -t omni -l 20 -c -i10,3': 2,675,818 context-switches 200.029651391 seconds time elapsed Signed-off-by: Eric Dumazet Cc: Neal Cardwell Cc: Yuchung Cheng Acked-By: Yuchung Cheng Signed-off-by: David S. Miller --- include/uapi/linux/tcp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index 8d776ebc4829..377f1e59411d 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -111,6 +111,7 @@ enum { #define TCP_REPAIR_OPTIONS 22 #define TCP_FASTOPEN 23 /* Enable FastOpen on listeners */ #define TCP_TIMESTAMP 24 +#define TCP_NOTSENT_LOWAT 25 /* limit number of unsent bytes in write queue */ struct tcp_repair_opt { __u32 opt_code; -- cgit v1.2.2 From 9548906b2bb7ff09e12c013a55d669bef2c8e121 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Thu, 25 Jul 2013 05:44:02 +0900 Subject: xattr: Constify ->name member of "struct xattr". Since everybody sets kstrdup()ed constant string to "struct xattr"->name but nobody modifies "struct xattr"->name , we can omit kstrdup() and its failure checking by constifying ->name member of "struct xattr". Signed-off-by: Tetsuo Handa Reviewed-by: Joel Becker [ocfs2] Acked-by: Serge E. Hallyn Acked-by: Casey Schaufler Acked-by: Mimi Zohar Reviewed-by: Paul Moore Tested-by: Paul Moore Acked-by: Eric Paris Signed-off-by: James Morris --- include/uapi/linux/reiserfs_xattr.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/reiserfs_xattr.h b/include/uapi/linux/reiserfs_xattr.h index d8ce17c2459a..38fdd648be21 100644 --- a/include/uapi/linux/reiserfs_xattr.h +++ b/include/uapi/linux/reiserfs_xattr.h @@ -16,7 +16,7 @@ struct reiserfs_xattr_header { }; struct reiserfs_security_handle { - char *name; + const char *name; void *value; size_t length; }; -- cgit v1.2.2 From c4415084218c68c5ee2fc583431e89a78d896b19 Mon Sep 17 00:00:00 2001 From: Dmitry Fink Date: Mon, 8 Jul 2013 13:04:44 +0300 Subject: OMAP: UART: Keep the TX fifo full when possible Current logic results in interrupt storm since the fifo is constantly below the threshold level. Change the logic to fill all the available spaces in the fifo as long as we have data to minimize the possibilty of underflow and elimiate excessive interrupts. Signed-off-by: Dmitry Fink Signed-off-by: Alexander Savchenko Signed-off-by: Greg Kroah-Hartman --- include/uapi/linux/serial_reg.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h index e6322605b138..97c26beae605 100644 --- a/include/uapi/linux/serial_reg.h +++ b/include/uapi/linux/serial_reg.h @@ -366,6 +366,7 @@ #define UART_OMAP_MDR1_FIR_MODE 0x05 /* FIR mode */ #define UART_OMAP_MDR1_CIR_MODE 0x06 /* CIR mode */ #define UART_OMAP_MDR1_DISABLE 0x07 /* Disable (default state) */ +#define UART_OMAP_TXFIFO_LVL 0x1A /* TX FIFO fullness */ /* * These are definitions for the Exar XR17V35X and XR17(C|D)15X -- cgit v1.2.2 From c4b058560762ec7ffe159b668fc47a8b7e271949 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 15 Jul 2013 12:39:23 +0100 Subject: serial:st-asc: Add ST ASC driver. This patch adds support to ASC (asynchronous serial controller) driver, which is basically a standard serial driver. This IP is common across all the ST parts for settop box platforms. ASC is embedded in ST COMMS IP block. It supports Rx & Tx functionality. It support all industry standard baud rates. Signed-off-by: Srinivas Kandagatla CC: Stephen Gallimore CC: Stuart Menefy CC: Arnd Bergmann CC: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman --- include/uapi/linux/serial_core.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 9119cc0977bf..e40ebe124ced 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -232,4 +232,7 @@ /* SH-SCI */ #define PORT_HSCIF 104 +/* ST ASC type numbers */ +#define PORT_ASC 105 + #endif /* _UAPILINUX_SERIAL_CORE_H */ -- cgit v1.2.2 From e7428e95a06fb516fac1308bd0e176e27c0b9287 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 25 Jul 2013 10:20:23 +0930 Subject: virtio-net: put virtio net header inline with data For small packets we can simplify xmit processing by linearizing buffers with the header: most packets seem to have enough head room we can use for this purpose. Since existing hypervisors require that header is the first s/g element, we need a feature bit for this. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell Signed-off-by: David S. Miller --- include/uapi/linux/virtio_net.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h index c520203fac2f..227d4ce84e79 100644 --- a/include/uapi/linux/virtio_net.h +++ b/include/uapi/linux/virtio_net.h @@ -70,7 +70,9 @@ struct virtio_net_config { __u16 max_virtqueue_pairs; } __attribute__((packed)); -/* This is the first element of the scatter-gather list. If you don't +/* This header comes first in the scatter-gather list. + * If VIRTIO_F_ANY_LAYOUT is not negotiated, it must + * be the first element of the scatter-gather list. If you don't * specify GSO or CSUM features, you can simply ignore the header. */ struct virtio_net_hdr { #define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset -- cgit v1.2.2 From 66cae9ed6bc46b8cc57a9693f99f69926f3cc7ef Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Mon, 29 Jul 2013 18:16:50 +0200 Subject: rtnl: export physical port id via RT netlink Signed-off-by: Jiri Pirko Acked-by: Ben Hutchings Signed-off-by: Narendra K Signed-off-by: David S. Miller --- include/uapi/linux/if_link.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 03f6170ab337..04c0e7a5d484 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -143,6 +143,7 @@ enum { IFLA_NUM_TX_QUEUES, IFLA_NUM_RX_QUEUES, IFLA_CARRIER, + IFLA_PHYS_PORT_ID, __IFLA_MAX }; -- cgit v1.2.2 From bdb829e1dd710029a075b5f86d4053e7715beb06 Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Mon, 15 Jul 2013 19:10:15 +0200 Subject: HID: uhid: use generic hidinput_input_event() HID core provides the same functionality and can convert the input event to a raw output report. We can thus drop UHID_OUTPUT_EV and rely on the mandatory UHID_OUTPUT. User-space wasn't able to do anything with UHID_OUTPUT_EV, anyway. They don't have access to the report fields. Signed-off-by: David Herrmann Acked-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- include/uapi/linux/uhid.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/uhid.h b/include/uapi/linux/uhid.h index e9ed951e2b09..414b74be4da1 100644 --- a/include/uapi/linux/uhid.h +++ b/include/uapi/linux/uhid.h @@ -30,7 +30,7 @@ enum uhid_event_type { UHID_OPEN, UHID_CLOSE, UHID_OUTPUT, - UHID_OUTPUT_EV, + UHID_OUTPUT_EV, /* obsolete! */ UHID_INPUT, UHID_FEATURE, UHID_FEATURE_ANSWER, @@ -69,6 +69,8 @@ struct uhid_output_req { __u8 rtype; } __attribute__((__packed__)); +/* Obsolete! Newer kernels will no longer send these events but instead convert + * it into raw output reports via UHID_OUTPUT. */ struct uhid_output_ev_req { __u16 type; __u16 code; -- cgit v1.2.2 From 7764a45a8f1fe74d4f7d301eaca2e558e7e2831a Mon Sep 17 00:00:00 2001 From: Stefan Tomanek Date: Thu, 1 Aug 2013 02:17:15 +0200 Subject: fib_rules: add .suppress operation This change adds a new operation to the fib_rules_ops struct; it allows the suppression of routing decisions if certain criteria are not met by its results. The first implemented constraint is a minimum prefix length added to the structures of routing rules. If a rule is added with a minimum prefix length >0, only routes meeting this threshold will be considered. Any other (more general) routing table entries will be ignored. When configuring a system with multiple network uplinks and default routes, it is often convinient to reference the main routing table multiple times - but omitting the default route. Using this patch and a modified "ip" utility, this can be achieved by using the following command sequence: $ ip route add table secuplink default via 10.42.23.1 $ ip rule add pref 100 table main prefixlength 1 $ ip rule add pref 150 fwmark 0xA table secuplink With this setup, packets marked 0xA will be processed by the additional routing table "secuplink", but only if no suitable route in the main routing table can be found. By using a minimal prefixlength of 1, the default route (/0) of the table "main" is hidden to packets processed by rule 100; packets traveling to destinations with more specific routing entries are processed as usual. Signed-off-by: Stefan Tomanek Signed-off-by: David S. Miller --- include/uapi/linux/fib_rules.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/fib_rules.h b/include/uapi/linux/fib_rules.h index 51da65b68b85..59cd31b3455e 100644 --- a/include/uapi/linux/fib_rules.h +++ b/include/uapi/linux/fib_rules.h @@ -45,7 +45,7 @@ enum { FRA_FLOW, /* flow/class id */ FRA_UNUSED6, FRA_UNUSED7, - FRA_UNUSED8, + FRA_TABLE_PREFIXLEN_MIN, FRA_TABLE, /* Extended table id */ FRA_FWMASK, /* mask for netfilter mark */ FRA_OIFNAME, -- cgit v1.2.2 From 16ef1fe272332b2f7fd99236017b891db48d9cd6 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Thu, 11 Jul 2013 16:09:05 +0200 Subject: nl80211/cfg80211: add channel switch command To allow channel switch announcements within beacons, add the channel switch command to nl80211/cfg80211. This is implementation is intended for AP and (later) IBSS mode. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index eb68735b3318..1f42bc3dcb9c 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -676,6 +676,16 @@ * @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules. * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules. * + * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the + * the new channel information (Channel Switch Announcement - CSA) + * in the beacon for some time (as defined in the + * %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the + * new channel. Userspace provides the new channel information (using + * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel + * width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform + * other station that transmission must be blocked until the channel + * switch is complete. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -841,6 +851,8 @@ enum nl80211_commands { NL80211_CMD_GET_COALESCE, NL80211_CMD_SET_COALESCE, + NL80211_CMD_CHANNEL_SWITCH, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1469,6 +1481,18 @@ enum nl80211_commands { * * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information. * + * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's + * until the channel switch event. + * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission + * must be blocked on the current channel (before the channel switch + * operation). + * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information + * for the time while performing a channel switch. + * @NL80211_ATTR_CSA_C_OFF_BEACON: Offset of the channel switch counter + * field in the beacons tail (%NL80211_ATTR_BEACON_TAIL). + * @NL80211_ATTR_CSA_C_OFF_PRESP: Offset of the channel switch counter + * field in the probe response (%NL80211_ATTR_PROBE_RESP). + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1771,6 +1795,12 @@ enum nl80211_attrs { NL80211_ATTR_COALESCE_RULE, + NL80211_ATTR_CH_SWITCH_COUNT, + NL80211_ATTR_CH_SWITCH_BLOCK_TX, + NL80211_ATTR_CSA_IES, + NL80211_ATTR_CSA_C_OFF_BEACON, + NL80211_ATTR_CSA_C_OFF_PRESP, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.2 From e216975ad97cfcfc436789aa66d59a0e93f337f7 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 1 Aug 2013 16:17:47 -0700 Subject: uapi: Convert some uses of 6 to ETH_ALEN Use the #define where appropriate. Add #include where appropriate too. Signed-off-by: Joe Perches Signed-off-by: David S. Miller --- include/uapi/linux/dn.h | 3 ++- include/uapi/linux/if_bridge.h | 3 ++- include/uapi/linux/netfilter_bridge/ebt_802_3.h | 5 +++-- include/uapi/linux/netfilter_ipv4/ipt_CLUSTERIP.h | 3 ++- include/uapi/linux/virtio_net.h | 2 +- include/uapi/linux/wimax/i2400m.h | 4 ++-- 6 files changed, 12 insertions(+), 8 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/dn.h b/include/uapi/linux/dn.h index 9c50445462d9..5fbdd3d49eba 100644 --- a/include/uapi/linux/dn.h +++ b/include/uapi/linux/dn.h @@ -2,6 +2,7 @@ #define _LINUX_DN_H #include +#include /* @@ -120,7 +121,7 @@ struct linkinfo_dn { * Ethernet address format (for DECnet) */ union etheraddress { - __u8 dne_addr[6]; /* Full ethernet address */ + __u8 dne_addr[ETH_ALEN]; /* Full ethernet address */ struct { __u8 dne_hiord[4]; /* DECnet HIORD prefix */ __u8 dne_nodeaddr[2]; /* DECnet node address */ diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h index 2d70d79ce2fd..39f621a9fe82 100644 --- a/include/uapi/linux/if_bridge.h +++ b/include/uapi/linux/if_bridge.h @@ -14,6 +14,7 @@ #define _UAPI_LINUX_IF_BRIDGE_H #include +#include #define SYSFS_BRIDGE_ATTR "bridge" #define SYSFS_BRIDGE_FDB "brforward" @@ -88,7 +89,7 @@ struct __port_info { }; struct __fdb_entry { - __u8 mac_addr[6]; + __u8 mac_addr[ETH_ALEN]; __u8 port_no; __u8 is_local; __u32 ageing_timer_value; diff --git a/include/uapi/linux/netfilter_bridge/ebt_802_3.h b/include/uapi/linux/netfilter_bridge/ebt_802_3.h index 5bf84912a082..f37522aade24 100644 --- a/include/uapi/linux/netfilter_bridge/ebt_802_3.h +++ b/include/uapi/linux/netfilter_bridge/ebt_802_3.h @@ -2,6 +2,7 @@ #define _UAPI__LINUX_BRIDGE_EBT_802_3_H #include +#include #define EBT_802_3_SAP 0x01 #define EBT_802_3_TYPE 0x02 @@ -42,8 +43,8 @@ struct hdr_ni { }; struct ebt_802_3_hdr { - __u8 daddr[6]; - __u8 saddr[6]; + __u8 daddr[ETH_ALEN]; + __u8 saddr[ETH_ALEN]; __be16 len; union { struct hdr_ui ui; diff --git a/include/uapi/linux/netfilter_ipv4/ipt_CLUSTERIP.h b/include/uapi/linux/netfilter_ipv4/ipt_CLUSTERIP.h index c6a204c97047..eac0f6548f47 100644 --- a/include/uapi/linux/netfilter_ipv4/ipt_CLUSTERIP.h +++ b/include/uapi/linux/netfilter_ipv4/ipt_CLUSTERIP.h @@ -2,6 +2,7 @@ #define _IPT_CLUSTERIP_H_target #include +#include enum clusterip_hashmode { CLUSTERIP_HASHMODE_SIP = 0, @@ -22,7 +23,7 @@ struct ipt_clusterip_tgt_info { __u32 flags; /* only relevant for new ones */ - __u8 clustermac[6]; + __u8 clustermac[ETH_ALEN]; __u16 num_total_nodes; __u16 num_local_nodes; __u16 local_nodes[CLUSTERIP_MAX_NODES]; diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h index 227d4ce84e79..172a7f00780c 100644 --- a/include/uapi/linux/virtio_net.h +++ b/include/uapi/linux/virtio_net.h @@ -60,7 +60,7 @@ struct virtio_net_config { /* The config defining mac address (if VIRTIO_NET_F_MAC) */ - __u8 mac[6]; + __u8 mac[ETH_ALEN]; /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */ __u16 status; /* Maximum number of each of transmit and receive queues; diff --git a/include/uapi/linux/wimax/i2400m.h b/include/uapi/linux/wimax/i2400m.h index 62d356153565..fd198bc24a3c 100644 --- a/include/uapi/linux/wimax/i2400m.h +++ b/include/uapi/linux/wimax/i2400m.h @@ -122,7 +122,7 @@ #define __LINUX__WIMAX__I2400M_H__ #include - +#include /* * Host Device Interface (HDI) common to all busses @@ -487,7 +487,7 @@ struct i2400m_tlv_l4_message_versions { struct i2400m_tlv_detailed_device_info { struct i2400m_tlv_hdr hdr; __u8 reserved1[400]; - __u8 mac_address[6]; + __u8 mac_address[ETH_ALEN]; __u8 reserved2[2]; } __attribute__((packed)); -- cgit v1.2.2 From 6ef94cfafba159d6b1a902ccb3349ac6a34ff6ad Mon Sep 17 00:00:00 2001 From: Stefan Tomanek Date: Fri, 2 Aug 2013 17:19:56 +0200 Subject: fib_rules: add route suppression based on ifgroup This change adds the ability to suppress a routing decision based upon the interface group the selected interface belongs to. This allows it to exclude specific devices from a routing decision. Signed-off-by: Stefan Tomanek Signed-off-by: David S. Miller --- include/uapi/linux/fib_rules.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/fib_rules.h b/include/uapi/linux/fib_rules.h index 59cd31b3455e..63e31166e85b 100644 --- a/include/uapi/linux/fib_rules.h +++ b/include/uapi/linux/fib_rules.h @@ -44,7 +44,7 @@ enum { FRA_FWMARK, /* mark */ FRA_FLOW, /* flow/class id */ FRA_UNUSED6, - FRA_UNUSED7, + FRA_SUPPRESS_IFGROUP, FRA_TABLE_PREFIXLEN_MIN, FRA_TABLE, /* Extended table id */ FRA_FWMASK, /* mask for netfilter mark */ -- cgit v1.2.2 From 73f5698e77219bfc3ea1903759fe8e20ab5b285e Mon Sep 17 00:00:00 2001 From: Stefan Tomanek Date: Sat, 3 Aug 2013 14:14:43 +0200 Subject: fib_rules: fix suppressor names and default values This change brings the suppressor attribute names into line; it also changes the data types to provide a more consistent interface. While -1 indicates that the suppressor is not enabled, values >= 0 for suppress_prefixlen or suppress_ifgroup reject routing decisions violating the constraint. This changes the previously presented behaviour of suppress_prefixlen, where a prefix length _less_ than the attribute value was rejected. After this change, a prefix length less than *or* equal to the value is considered a violation of the rule constraint. It also changes the default values for default and newly added rules (disabling any suppression for those). Signed-off-by: Stefan Tomanek Signed-off-by: David S. Miller --- include/uapi/linux/fib_rules.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/fib_rules.h b/include/uapi/linux/fib_rules.h index 63e31166e85b..2b82d7e30974 100644 --- a/include/uapi/linux/fib_rules.h +++ b/include/uapi/linux/fib_rules.h @@ -45,7 +45,7 @@ enum { FRA_FLOW, /* flow/class id */ FRA_UNUSED6, FRA_SUPPRESS_IFGROUP, - FRA_TABLE_PREFIXLEN_MIN, + FRA_SUPPRESS_PREFIXLEN, FRA_TABLE, /* Extended table id */ FRA_FWMASK, /* mask for netfilter mark */ FRA_OIFNAME, -- cgit v1.2.2 From cf4957f17f2a89984915ea808876d9c82225b862 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Wed, 24 Oct 2012 13:37:58 +0200 Subject: perf: Add PERF_EVENT_IOC_ID ioctl to return event ID The only way to get the event ID is by reading the event fd, followed by parsing the ID value out of the returned data. While this is ok for current read format used by perf tool, it is not ok when we use PERF_FORMAT_GROUP format. With this format the data are returned for the whole group and there's no way to find out what ID belongs to our fd (if we are not group leader event). Adding a simple ioctl that returns event primary ID for given fd. Signed-off-by: Jiri Olsa Acked-by: Namhyung Kim Acked-by: Peter Zijlstra Cc: Corey Ashford Cc: Frederic Weisbecker Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-v1bn5cto707jn0bon34afqr1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- include/uapi/linux/perf_event.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index efef1d37a371..62c25a25291c 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -321,6 +321,7 @@ struct perf_event_attr { #define PERF_EVENT_IOC_PERIOD _IOW('$', 4, __u64) #define PERF_EVENT_IOC_SET_OUTPUT _IO ('$', 5) #define PERF_EVENT_IOC_SET_FILTER _IOW('$', 6, char *) +#define PERF_EVENT_IOC_ID _IOR('$', 7, u64 *) enum perf_event_ioc_flags { PERF_IOC_FLAG_GROUP = 1U << 0, -- cgit v1.2.2 From 1f07d03e2069df2ecd82301936b598a3b257c6d6 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 6 Aug 2013 03:32:11 -0700 Subject: net: add SNMP counters tracking incoming ECN bits With GRO/LRO processing, there is a problem because Ip[6]InReceives SNMP counters do not count the number of frames, but number of aggregated segments. Its probably too late to change this now. This patch adds four new counters, tracking number of frames, regardless of LRO/GRO, and on a per ECN status basis, for IPv4 and IPv6. Ip[6]NoECTPkts : Number of packets received with NOECT Ip[6]ECT1Pkts : Number of packets received with ECT(1) Ip[6]ECT0Pkts : Number of packets received with ECT(0) Ip[6]CEPkts : Number of packets received with Congestion Experienced lph37:~# nstat | egrep "Pkts|InReceive" IpInReceives 1634137 0.0 Ip6InReceives 3714107 0.0 Ip6InNoECTPkts 19205 0.0 Ip6InECT0Pkts 52651828 0.0 IpExtInNoECTPkts 33630 0.0 IpExtInECT0Pkts 15581379 0.0 IpExtInCEPkts 6 0.0 Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/uapi/linux/snmp.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h index af0a674cc677..60601d28da75 100644 --- a/include/uapi/linux/snmp.h +++ b/include/uapi/linux/snmp.h @@ -51,6 +51,10 @@ enum IPSTATS_MIB_INBCASTOCTETS, /* InBcastOctets */ IPSTATS_MIB_OUTBCASTOCTETS, /* OutBcastOctets */ IPSTATS_MIB_CSUMERRORS, /* InCsumErrors */ + IPSTATS_MIB_NOECTPKTS, /* InNoECTPkts */ + IPSTATS_MIB_ECT1PKTS, /* InECT1Pkts */ + IPSTATS_MIB_ECT0PKTS, /* InECT0Pkts */ + IPSTATS_MIB_CEPKTS, /* InCEPkts */ __IPSTATS_MIB_MAX }; -- cgit v1.2.2 From 3a3bb00d5c73f3ae7833f6534982b5b2f56ac9b4 Mon Sep 17 00:00:00 2001 From: Raghavendra K T Date: Fri, 9 Aug 2013 19:52:00 +0530 Subject: kvm uapi: Add KICK_CPU and PV_UNHALT definition to uapi These are needed by both guest and host. Originally-from: Srivatsa Vaddagiri Signed-off-by: Raghavendra K T Link: http://lkml.kernel.org/r/1376058122-8248-13-git-send-email-raghavendra.kt@linux.vnet.ibm.com Acked-by: Gleb Natapov Acked-by: Ingo Molnar Signed-off-by: H. Peter Anvin --- include/uapi/linux/kvm_para.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/kvm_para.h b/include/uapi/linux/kvm_para.h index cea2c5c72d26..2841f86eae0b 100644 --- a/include/uapi/linux/kvm_para.h +++ b/include/uapi/linux/kvm_para.h @@ -19,6 +19,7 @@ #define KVM_HC_MMU_OP 2 #define KVM_HC_FEATURES 3 #define KVM_HC_PPC_MAP_MAGIC_PAGE 4 +#define KVM_HC_KICK_CPU 5 /* * hypercalls use architecture specific -- cgit v1.2.2 From bd0779370588386e4a67ba5d0b176cfded8e6a53 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 7 Aug 2013 18:13:20 +0200 Subject: netfilter: nfnetlink_queue: allow to attach expectations to conntracks This patch adds the capability to attach expectations via nfnetlink_queue. This is required by conntrack helpers that trigger expectations based on the first packet seen like the TFTP and the DHCPv6 user-space helpers. Signed-off-by: Pablo Neira Ayuso --- include/uapi/linux/netfilter/nfnetlink_queue.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/netfilter/nfnetlink_queue.h b/include/uapi/linux/netfilter/nfnetlink_queue.h index 3a9b92147339..0132bad79de7 100644 --- a/include/uapi/linux/netfilter/nfnetlink_queue.h +++ b/include/uapi/linux/netfilter/nfnetlink_queue.h @@ -46,6 +46,7 @@ enum nfqnl_attr_type { NFQA_CT_INFO, /* enum ip_conntrack_info */ NFQA_CAP_LEN, /* __u32 length of captured packet */ NFQA_SKB_INFO, /* __u32 skb meta information */ + NFQA_EXP, /* nf_conntrack_netlink.h */ __NFQA_MAX }; -- cgit v1.2.2 From ebd8b934e23f45ad3fc8a5a28bc5a96741a6a106 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Sat, 10 Aug 2013 15:22:58 -0700 Subject: pptp: fix byte order warnings Pptp driver has lots of byte order warnings from sparse. This was because the on-the-wire header is in network byte order (obviously) but the definition did not reflect that. Also, the address structure to user space actually put the call id in host order. Rather than break ABI compatibility, just acknowledge the existing design. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- include/uapi/linux/if_pppox.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_pppox.h b/include/uapi/linux/if_pppox.h index e36a4aecd311..e128769331b5 100644 --- a/include/uapi/linux/if_pppox.h +++ b/include/uapi/linux/if_pppox.h @@ -46,7 +46,7 @@ struct pppoe_addr { * PPTP addressing definition */ struct pptp_addr { - __be16 call_id; + __u16 call_id; struct in_addr sin_addr; }; -- cgit v1.2.2 From 1972b5b3a66f1b6a9df04cc91faf401354919262 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 25 Jun 2013 12:42:54 +0200 Subject: NFC: Document secure element addition/removal netlink events Signed-off-by: Samuel Ortiz --- include/uapi/linux/nfc.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index 8137dd8d2adf..40ada984cb78 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -71,6 +71,11 @@ * @NFC_CMD_DISABLE_SE: Disable the physical link to a specific secure element. * @NFC_CMD_FW_DOWNLOAD: Request to Load/flash firmware, or event to inform * that some firmware was loaded + * @NFC_EVENT_SE_ADDED: Event emitted when a new secure element is discovered. + * This typically will be sent whenever a new NFC controller with either + * an embedded SE or an UICC one connected to it through SWP. + * @NFC_EVENT_SE_REMOVED: Event emitted when a secure element is removed from + * the system, as a consequence of e.g. an NFC controller being unplugged. */ enum nfc_commands { NFC_CMD_UNSPEC, -- cgit v1.2.2 From 91a32269e31282405db405b9ec9ce1a30568e4b0 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 25 Jun 2013 16:22:08 +0200 Subject: NFC: Define secure element connectivity and transaction events The SE_CONNECTIVITY event is for an SE to request connection to e.g. a modem. The SE_TRANSACTION one is sent when an application running on a specific SE wants to notify the host CPU about the end of a transaction. Those events respectively map to the EVT_CONNECTIVITY and the EVT_TRANSACTION HCI events. Signed-off-by: Samuel Ortiz --- include/uapi/linux/nfc.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index 40ada984cb78..539d60494c04 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -76,6 +76,14 @@ * an embedded SE or an UICC one connected to it through SWP. * @NFC_EVENT_SE_REMOVED: Event emitted when a secure element is removed from * the system, as a consequence of e.g. an NFC controller being unplugged. + * @NFC_EVENT_SE_CONNECTIVITY: This event is emitted whenever a secure element + * is requesting connectivity access. For example a UICC SE may need to + * talk with a sleeping modem and will notify this need by sending this + * event. It is then up to userspace to decide if it will wake the modem + * up or not. + * @NFC_EVENT_SE_TRANSACTION: This event is sent when an application running on + * a specific SE notifies us about the end of a transaction. The parameter + * for this event is the application ID (AID). */ enum nfc_commands { NFC_CMD_UNSPEC, @@ -102,6 +110,8 @@ enum nfc_commands { NFC_CMD_FW_DOWNLOAD, NFC_EVENT_SE_ADDED, NFC_EVENT_SE_REMOVED, + NFC_EVENT_SE_CONNECTIVITY, + NFC_EVENT_SE_TRANSACTION, /* private: internal use only */ __NFC_CMD_AFTER_LAST }; @@ -159,6 +169,7 @@ enum nfc_attrs { NFC_ATTR_FIRMWARE_NAME, NFC_ATTR_SE_INDEX, NFC_ATTR_SE_TYPE, + NFC_ATTR_SE_AID, /* private: internal use only */ __NFC_ATTR_AFTER_LAST }; -- cgit v1.2.2 From ac22ac466a659f1b2e02a2e2ee23fc5c42da2c95 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 24 Jul 2013 18:10:50 +0200 Subject: NFC: Add a GET_SE netlink API In order to fetch the discovered secure elements from an NFC controller, we need to send a netlink command that will dump the list of available SEs from NFC. Signed-off-by: Samuel Ortiz --- include/uapi/linux/nfc.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index 539d60494c04..029921b067fd 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -84,6 +84,7 @@ * @NFC_EVENT_SE_TRANSACTION: This event is sent when an application running on * a specific SE notifies us about the end of a transaction. The parameter * for this event is the application ID (AID). + * @NFC_CMD_GET_SE: Dump all discovered secure elements from an NFC controller. */ enum nfc_commands { NFC_CMD_UNSPEC, @@ -112,6 +113,7 @@ enum nfc_commands { NFC_EVENT_SE_REMOVED, NFC_EVENT_SE_CONNECTIVITY, NFC_EVENT_SE_TRANSACTION, + NFC_CMD_GET_SE, /* private: internal use only */ __NFC_CMD_AFTER_LAST }; -- cgit v1.2.2 From 352a5f5fb3ad8f829cfd4248fe6119895bda881f Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Fri, 19 Jul 2013 14:57:55 +0200 Subject: NFC: netlink: Add result of firmware operation to completion event Result is added as an NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS attribute containing the standard errno positive value of the completion result. This event will be sent when the firmare download operation is done and will contain the operation result. Signed-off-by: Eric Lapuyade Signed-off-by: Samuel Ortiz --- include/uapi/linux/nfc.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index 029921b067fd..29bed72a4ac4 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -146,6 +146,7 @@ enum nfc_commands { * @NFC_ATTR_FIRMWARE_NAME: Free format firmware version * @NFC_ATTR_SE_INDEX: Secure element index * @NFC_ATTR_SE_TYPE: Secure element type (UICC or EMBEDDED) + * @NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS: Firmware download operation status */ enum nfc_attrs { NFC_ATTR_UNSPEC, @@ -172,6 +173,7 @@ enum nfc_attrs { NFC_ATTR_SE_INDEX, NFC_ATTR_SE_TYPE, NFC_ATTR_SE_AID, + NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS, /* private: internal use only */ __NFC_ATTR_AFTER_LAST }; -- cgit v1.2.2 From fc4eba58b4c1462ff3d6247b66fb47d6928db6d2 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Wed, 14 Aug 2013 01:03:46 +0200 Subject: ipv6: make unsolicited report intervals configurable for mld Commit cab70040dfd95ee32144f02fade64f0cb94f31a0 ("net: igmp: Reduce Unsolicited report interval to 1s when using IGMPv3") and 2690048c01f32bf45d1c1e1ab3079bc10ad2aea7 ("net: igmp: Allow user-space configuration of igmp unsolicited report interval") by William Manley made igmp unsolicited report intervals configurable per interface and corrected the interval of unsolicited igmpv3 report messages resendings to 1s. Same needs to be done for IPv6: MLDv1 (RFC2710 7.10.): 10 seconds MLDv2 (RFC3810 9.11.): 1 second Both intervals are configurable via new procfs knobs mldv1_unsolicited_report_interval and mldv2_unsolicited_report_interval. (also added .force_mld_version to ipv6_devconf_dflt to bring structs in line without semantic changes) v2: a) Joined documentation update for IPv4 and IPv6 MLD/IGMP unsolicited_report_interval procfs knobs. b) incorporate stylistic feedback from William Manley v3: a) add new DEVCONF_* values to the end of the enum (thanks to David Miller) Cc: Cong Wang Cc: William Manley Cc: Benjamin LaHaise Cc: YOSHIFUJI Hideaki Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- include/uapi/linux/ipv6.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h index 4bda4cf5b0f5..d07ac6903e59 100644 --- a/include/uapi/linux/ipv6.h +++ b/include/uapi/linux/ipv6.h @@ -160,6 +160,8 @@ enum { DEVCONF_ACCEPT_DAD, DEVCONF_FORCE_TLLAO, DEVCONF_NDISC_NOTIFY, + DEVCONF_MLDV1_UNSOLICITED_REPORT_INTERVAL, + DEVCONF_MLDV2_UNSOLICITED_REPORT_INTERVAL, DEVCONF_MAX }; -- cgit v1.2.2 From f0c03956ac40fdc4fbce7bed262ae74ac372e765 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Tue, 13 Aug 2013 15:05:38 +0200 Subject: netfilter: export xt_rpfilter.h to userland This file contains the API for the match "rpfilter", hence it should be exported to userland. Signed-off-by: Nicolas Dichtel Signed-off-by: Pablo Neira Ayuso --- include/uapi/linux/netfilter/Kbuild | 1 + include/uapi/linux/netfilter/xt_rpfilter.h | 23 +++++++++++++++++++++++ 2 files changed, 24 insertions(+) create mode 100644 include/uapi/linux/netfilter/xt_rpfilter.h (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/netfilter/Kbuild b/include/uapi/linux/netfilter/Kbuild index 41115776d76f..dc00927ffd62 100644 --- a/include/uapi/linux/netfilter/Kbuild +++ b/include/uapi/linux/netfilter/Kbuild @@ -68,6 +68,7 @@ header-y += xt_quota.h header-y += xt_rateest.h header-y += xt_realm.h header-y += xt_recent.h +header-y += xt_rpfilter.h header-y += xt_sctp.h header-y += xt_set.h header-y += xt_socket.h diff --git a