From 8bf62ecee58360749c5f0e68bc97d5e02a6816b1 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Thu, 12 May 2005 15:29:42 -0400 Subject: [libata] C/H/S support, for older devices --- include/linux/ata.h | 14 ++++++++++++++ include/linux/libata.h | 6 ++++++ 2 files changed, 20 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index f178894edd04..d8981402cd5b 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -125,6 +125,7 @@ enum { ATA_CMD_PACKET = 0xA0, ATA_CMD_VERIFY = 0x40, ATA_CMD_VERIFY_EXT = 0x42, + ATA_CMD_INIT_DEV_PARAMS = 0x91, /* SETFEATURES stuff */ SETFEATURES_XFER = 0x03, @@ -174,6 +175,7 @@ enum { ATA_TFLAG_ISADDR = (1 << 1), /* enable r/w to nsect/lba regs */ ATA_TFLAG_DEVICE = (1 << 2), /* enable r/w to device reg */ ATA_TFLAG_WRITE = (1 << 3), /* data dir: host->dev==1 (write) */ + ATA_TFLAG_LBA = (1 << 4), /* enable LBA */ }; enum ata_tf_protocols { @@ -242,6 +244,18 @@ struct ata_taskfile { ((u64) (id)[(n) + 1] << 16) | \ ((u64) (id)[(n) + 0]) ) +static inline int ata_id_current_chs_valid(u16 *id) +{ + /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command + has not been issued to the device then the values of + id[54] to id[56] are vendor specific. */ + return (id[53] & 0x01) && /* Current translation valid */ + id[54] && /* cylinders in current translation */ + id[55] && /* heads in current translation */ + id[55] <= 16 && + id[56]; /* sectors in current translation */ +} + static inline int atapi_cdb_len(u16 *dev_id) { u16 tmp = dev_id[0] & 0x3; diff --git a/include/linux/libata.h b/include/linux/libata.h index 505160ab472b..bd0df84cfd87 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -95,6 +95,7 @@ enum { ATA_DFLAG_LBA48 = (1 << 0), /* device supports LBA48 */ ATA_DFLAG_PIO = (1 << 1), /* device currently in PIO mode */ ATA_DFLAG_LOCK_SECTORS = (1 << 2), /* don't adjust max_sectors */ + ATA_DFLAG_LBA = (1 << 3), /* device supports LBA */ ATA_DEV_UNKNOWN = 0, /* unknown device */ ATA_DEV_ATA = 1, /* ATA device */ @@ -278,6 +279,11 @@ struct ata_device { u8 xfer_protocol; /* taskfile xfer protocol */ u8 read_cmd; /* opcode to use on read */ u8 write_cmd; /* opcode to use on write */ + + /* for CHS addressing */ + u16 cylinders; /* Number of cylinders */ + u16 heads; /* Number of heads */ + u16 sectors; /* Number of sectors per track */ }; struct ata_port { -- cgit v1.2.2 From 14be71f4c5c5ad1e222c5202ee6d234e9c8828b7 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 27 Sep 2005 17:36:35 +0800 Subject: [PATCH] libata: rename host states Changes: s/PIO_ST_/HSM_ST_/ and s/pio_task_state/hsm_task_state/. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- include/linux/libata.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index ceee1fc42c60..bb2d916bce44 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -156,15 +156,15 @@ enum { ATA_SHIFT_PIO = 11, }; -enum pio_task_states { - PIO_ST_UNKNOWN, - PIO_ST_IDLE, - PIO_ST_POLL, - PIO_ST_TMOUT, - PIO_ST, - PIO_ST_LAST, - PIO_ST_LAST_POLL, - PIO_ST_ERR, +enum hsm_task_states { + HSM_ST_UNKNOWN, + HSM_ST_IDLE, + HSM_ST_POLL, + HSM_ST_TMOUT, + HSM_ST, + HSM_ST_LAST, + HSM_ST_LAST_POLL, + HSM_ST_ERR, }; /* forward declarations */ @@ -319,7 +319,7 @@ struct ata_port { struct work_struct packet_task; struct work_struct pio_task; - unsigned int pio_task_state; + unsigned int hsm_task_state; unsigned long pio_task_timeout; void *private_data; -- cgit v1.2.2 From b4b52db71529bbe46da914eda772fb574914c94d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 26 Sep 2005 12:48:41 +0100 Subject: [PATCH] ata: re-order speeds sensibly. Signed-off-by: Jeff Garzik --- include/linux/ata.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index 85169ea9eb01..ecb7346d0c16 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -147,14 +147,14 @@ enum { XFER_MW_DMA_2 = 0x22, XFER_MW_DMA_1 = 0x21, XFER_MW_DMA_0 = 0x20, + XFER_SW_DMA_2 = 0x12, + XFER_SW_DMA_1 = 0x11, + XFER_SW_DMA_0 = 0x10, XFER_PIO_4 = 0x0C, XFER_PIO_3 = 0x0B, XFER_PIO_2 = 0x0A, XFER_PIO_1 = 0x09, XFER_PIO_0 = 0x08, - XFER_SW_DMA_2 = 0x12, - XFER_SW_DMA_1 = 0x11, - XFER_SW_DMA_0 = 0x10, XFER_PIO_SLOW = 0x00, /* ATAPI stuff */ -- cgit v1.2.2 From 47a8659380d40d5c0786ddb62a89b3f7f1392430 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 4 Oct 2005 08:09:19 -0400 Subject: libata: bitmask based pci init functions for one or two ports This redoes the n_ports logic I proposed before as a bitmask. ata_pci_init_native_mode is now used with a mask allowing for mixed mode stuff later on. ata_pci_init_legacy_port is called with port number and does one port now not two. Instead it is called twice by the ata init logic which cleans both of them up. There are stil limits in the original code left over - IRQ/port mapping for legacy mode should be arch specific values - You can have one legacy mode IDE adapter per PCI root bridge on some systems - Doesn't handle mixed mode devices yet (but is now a lot closer to it) --- include/linux/libata.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 4739a75b983d..4d45179872cc 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -155,6 +155,10 @@ enum { ATA_SHIFT_UDMA = 0, ATA_SHIFT_MWDMA = 8, ATA_SHIFT_PIO = 11, + + /* Masks for port functions */ + ATA_PORT_PRIMARY = (1 << 0), + ATA_PORT_SECONDARY = (1 << 1), }; enum hsm_task_states { @@ -458,7 +462,7 @@ struct pci_bits { extern void ata_pci_host_stop (struct ata_host_set *host_set); extern struct ata_probe_ent * -ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port); +ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int portmask); extern int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits); #endif /* CONFIG_PCI */ -- cgit v1.2.2 From 67846b30171cc4d706125f630193a76a26bb334a Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 5 Oct 2005 02:58:32 -0400 Subject: libata: add ata_ratelimit(), use it in AHCI driver irq handler --- include/linux/libata.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 4d45179872cc..7929cfc9318d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -410,6 +410,8 @@ extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmn extern int ata_scsi_error(struct Scsi_Host *host); extern int ata_scsi_release(struct Scsi_Host *host); extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); +extern int ata_ratelimit(void); + /* * Default driver ops implementations */ -- cgit v1.2.2 From 8cbd6df1f0ce977ab7b61feffa59879bb5e0ed8f Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Wed, 12 Oct 2005 15:06:27 +0800 Subject: [PATCH] libata CHS: calculate read/write commands and protocol on the fly (revise #6) - merge ata_prot_to_cmd() and ata_dev_set_protocol() as ata_rwcmd_protocol() - pave road for read/write multiple support - remove usage of pre-cached command and protocol values and call ata_rwcmd_protocol() instead Signed-off-by: Albert Lee ============== Signed-off-by: Jeff Garzik --- include/linux/ata.h | 4 ++++ include/linux/libata.h | 6 ++---- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index ecb7346d0c16..630908c9378b 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -128,6 +128,10 @@ enum { ATA_CMD_PIO_READ_EXT = 0x24, ATA_CMD_PIO_WRITE = 0x30, ATA_CMD_PIO_WRITE_EXT = 0x34, + ATA_CMD_READ_MULTI = 0xC4, + ATA_CMD_READ_MULTI_EXT = 0x29, + ATA_CMD_WRITE_MULTI = 0xC5, + ATA_CMD_WRITE_MULTI_EXT = 0x39, ATA_CMD_SET_FEATURES = 0xEF, ATA_CMD_PACKET = 0xA0, ATA_CMD_VERIFY = 0x40, diff --git a/include/linux/libata.h b/include/linux/libata.h index 7929cfc9318d..0261c55f3483 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -283,10 +283,8 @@ struct ata_device { u8 xfer_mode; unsigned int xfer_shift; /* ATA_SHIFT_xxx */ - /* cache info about current transfer mode */ - u8 xfer_protocol; /* taskfile xfer protocol */ - u8 read_cmd; /* opcode to use on read */ - u8 write_cmd; /* opcode to use on write */ + unsigned int multi_count; /* sectors count for + READ/WRITE MULTIPLE */ /* for CHS addressing */ u16 cylinders; /* Number of cylinders */ -- cgit v1.2.2 From 11e29e21514517f3022a1f30998ac4c7b1197658 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 21 Oct 2005 18:46:32 -0400 Subject: libata: handle early device PIO modes correctly --- include/linux/ata.h | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index 630908c9378b..33276d1d05d2 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -42,13 +42,18 @@ enum { ATA_SECT_SIZE = 512, ATA_ID_WORDS = 256, - ATA_ID_PROD_OFS = 27, - ATA_ID_FW_REV_OFS = 23, ATA_ID_SERNO_OFS = 10, - ATA_ID_MAJOR_VER = 80, - ATA_ID_PIO_MODES = 64, + ATA_ID_FW_REV_OFS = 23, + ATA_ID_PROD_OFS = 27, + ATA_ID_OLD_PIO_MODES = 51, + ATA_ID_FIELD_VALID = 53, ATA_ID_MWDMA_MODES = 63, + ATA_ID_PIO_MODES = 64, + ATA_ID_EIDE_DMA_MIN = 65, + ATA_ID_EIDE_PIO = 67, + ATA_ID_EIDE_PIO_IORDY = 68, ATA_ID_UDMA_MODES = 88, + ATA_ID_MAJOR_VER = 80, ATA_ID_PIO4 = (1 << 1), ATA_PCI_CTL_OFS = 2, -- cgit v1.2.2 From 452503f993feffe96e8cc9fbff4888b96e2c5e40 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 21 Oct 2005 19:01:32 -0400 Subject: Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- include/linux/libata.h | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 0261c55f3483..0e214f8c8f9f 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -388,6 +388,19 @@ struct ata_port_info { struct ata_port_operations *port_ops; }; +struct ata_timing { + unsigned short mode; /* ATA mode */ + unsigned short setup; /* t1 */ + unsigned short act8b; /* t2 for 8-bit I/O */ + unsigned short rec8b; /* t2i for 8-bit I/O */ + unsigned short cyc8b; /* t0 for 8-bit I/O */ + unsigned short active; /* t2 or tD */ + unsigned short recover; /* t2i or tK */ + unsigned short cycle; /* t0 */ + unsigned short udma; /* t2CYCTYP/2 */ +}; + +#define FIT(v,vmin,vmax) max_t(short,min_t(short,v,vmax),vmin) extern void ata_port_probe(struct ata_port *); extern void __sata_phy_reset(struct ata_port *ap); @@ -451,6 +464,32 @@ extern int ata_std_bios_param(struct scsi_device *sdev, sector_t capacity, int geom[]); extern int ata_scsi_slave_config(struct scsi_device *sdev); +/* + * Timing helpers + */ +extern int ata_timing_compute(struct ata_device *, unsigned short, + struct ata_timing *, int, int); +extern void ata_timing_merge(const struct ata_timing *, + const struct ata_timing *, struct ata_timing *, + unsigned int); + +enum { + ATA_TIMING_SETUP = (1 << 0), + ATA_TIMING_ACT8B = (1 << 1), + ATA_TIMING_REC8B = (1 << 2), + ATA_TIMING_CYC8B = (1 << 3), + ATA_TIMING_8BIT = ATA_TIMING_ACT8B | ATA_TIMING_REC8B | + ATA_TIMING_CYC8B, + ATA_TIMING_ACTIVE = (1 << 4), + ATA_TIMING_RECOVER = (1 << 5), + ATA_TIMING_CYCLE = (1 << 6), + ATA_TIMING_UDMA = (1 << 7), + ATA_TIMING_ALL = ATA_TIMING_SETUP | ATA_TIMING_ACT8B | + ATA_TIMING_REC8B | ATA_TIMING_CYC8B | + ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER | + ATA_TIMING_CYCLE | ATA_TIMING_UDMA, +}; + #ifdef CONFIG_PCI struct pci_bits { -- cgit v1.2.2 From cf482935c6abe5245e481213c6e6df808c976f56 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 22 Oct 2005 00:19:33 -0400 Subject: libata: turn on block layer clustering --- include/linux/libata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 0e214f8c8f9f..634b5aa0a615 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -91,7 +91,7 @@ enum { ATA_SHT_EMULATED = 1, ATA_SHT_CMD_PER_LUN = 1, ATA_SHT_THIS_ID = -1, - ATA_SHT_USE_CLUSTERING = 0, + ATA_SHT_USE_CLUSTERING = 1, /* struct ata_device stuff */ ATA_DFLAG_LBA48 = (1 << 0), /* device supports LBA48 */ -- cgit v1.2.2 From 057ace5e79da9ebf2aa82833cfea825533ac06fb Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 22 Oct 2005 14:27:05 -0400 Subject: libata: const-ification bombing run Enforce access rules where appropriate. If the compiler is smart enough, this may buy us an optimization or two as a side effect. --- include/linux/ata.h | 6 +++--- include/linux/libata.h | 32 ++++++++++++++++---------------- 2 files changed, 19 insertions(+), 19 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index 33276d1d05d2..d2873b732bb1 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -261,7 +261,7 @@ struct ata_taskfile { ((u64) (id)[(n) + 1] << 16) | \ ((u64) (id)[(n) + 0]) ) -static inline int ata_id_current_chs_valid(u16 *id) +static inline int ata_id_current_chs_valid(const u16 *id) { /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command has not been issued to the device then the values of @@ -273,7 +273,7 @@ static inline int ata_id_current_chs_valid(u16 *id) id[56]; /* sectors in current translation */ } -static inline int atapi_cdb_len(u16 *dev_id) +static inline int atapi_cdb_len(const u16 *dev_id) { u16 tmp = dev_id[0] & 0x3; switch (tmp) { @@ -283,7 +283,7 @@ static inline int atapi_cdb_len(u16 *dev_id) } } -static inline int is_atapi_taskfile(struct ata_taskfile *tf) +static inline int is_atapi_taskfile(const struct ata_taskfile *tf) { return (tf->protocol == ATA_PROT_ATAPI) || (tf->protocol == ATA_PROT_ATAPI_NODATA) || diff --git a/include/linux/libata.h b/include/linux/libata.h index 634b5aa0a615..00a8a5738858 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -202,7 +202,7 @@ struct ata_ioports { struct ata_probe_ent { struct list_head node; struct device *dev; - struct ata_port_operations *port_ops; + const struct ata_port_operations *port_ops; Scsi_Host_Template *sht; struct ata_ioports port[ATA_MAX_PORTS]; unsigned int n_ports; @@ -225,7 +225,7 @@ struct ata_host_set { void __iomem *mmio_base; unsigned int n_ports; void *private_data; - struct ata_port_operations *ops; + const struct ata_port_operations *ops; struct ata_port * ports[0]; }; @@ -294,7 +294,7 @@ struct ata_device { struct ata_port { struct Scsi_Host *host; /* our co-allocated scsi host */ - struct ata_port_operations *ops; + const struct ata_port_operations *ops; unsigned long flags; /* ATA_FLAG_xxx */ unsigned int id; /* unique id req'd by scsi midlyr */ unsigned int port_no; /* unique port #; from zero */ @@ -341,10 +341,10 @@ struct ata_port_operations { void (*set_piomode) (struct ata_port *, struct ata_device *); void (*set_dmamode) (struct ata_port *, struct ata_device *); - void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf); + void (*tf_load) (struct ata_port *ap, const struct ata_taskfile *tf); void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); - void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf); + void (*exec_command)(struct ata_port *ap, const struct ata_taskfile *tf); u8 (*check_status)(struct ata_port *ap); u8 (*check_altstatus)(struct ata_port *ap); u8 (*check_err)(struct ata_port *ap); @@ -385,7 +385,7 @@ struct ata_port_info { unsigned long pio_mask; unsigned long mwdma_mask; unsigned long udma_mask; - struct ata_port_operations *port_ops; + const struct ata_port_operations *port_ops; }; struct ata_timing { @@ -413,7 +413,7 @@ extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_i unsigned int n_ports); extern void ata_pci_remove_one (struct pci_dev *pdev); #endif /* CONFIG_PCI */ -extern int ata_device_add(struct ata_probe_ent *ent); +extern int ata_device_add(const struct ata_probe_ent *ent); extern void ata_host_set_remove(struct ata_host_set *host_set); extern int ata_scsi_detect(Scsi_Host_Template *sht); extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg); @@ -426,16 +426,16 @@ extern int ata_ratelimit(void); /* * Default driver ops implementations */ -extern void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf); +extern void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf); extern void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf); -extern void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp); -extern void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf); +extern void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp); +extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf); extern void ata_noop_dev_select (struct ata_port *ap, unsigned int device); extern void ata_std_dev_select (struct ata_port *ap, unsigned int device); extern u8 ata_check_status(struct ata_port *ap); extern u8 ata_altstatus(struct ata_port *ap); extern u8 ata_chk_err(struct ata_port *ap); -extern void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf); +extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf); extern int ata_port_start (struct ata_port *ap); extern void ata_port_stop (struct ata_port *ap); extern void ata_host_stop (struct ata_host_set *host_set); @@ -446,8 +446,8 @@ extern void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen); extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem); -extern unsigned int ata_dev_classify(struct ata_taskfile *tf); -extern void ata_dev_id_string(u16 *id, unsigned char *s, +extern unsigned int ata_dev_classify(const struct ata_taskfile *tf); +extern void ata_dev_id_string(const u16 *id, unsigned char *s, unsigned int ofs, unsigned int len); extern void ata_dev_config(struct ata_port *ap, unsigned int i); extern void ata_bmdma_setup (struct ata_queued_cmd *qc); @@ -502,7 +502,7 @@ struct pci_bits { extern void ata_pci_host_stop (struct ata_host_set *host_set); extern struct ata_probe_ent * ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int portmask); -extern int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits); +extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits); #endif /* CONFIG_PCI */ @@ -512,7 +512,7 @@ static inline unsigned int ata_tag_valid(unsigned int tag) return (tag < ATA_MAX_QUEUE) ? 1 : 0; } -static inline unsigned int ata_dev_present(struct ata_device *dev) +static inline unsigned int ata_dev_present(const struct ata_device *dev) { return ((dev->class == ATA_DEV_ATA) || (dev->class == ATA_DEV_ATAPI)); @@ -711,7 +711,7 @@ static inline unsigned int sata_dev_present(struct ata_port *ap) return ((scr_read(ap, SCR_STATUS) & 0xf) == 0x3) ? 1 : 0; } -static inline int ata_try_flush_cache(struct ata_device *dev) +static inline int ata_try_flush_cache(const struct ata_device *dev) { return ata_id_wcache_enabled(dev->id) || ata_id_has_flush(dev->id) || -- cgit v1.2.2