From 03ad032bb78b2732b607ed198e951240e1d21e59 Mon Sep 17 00:00:00 2001 From: Peter Holik Date: Sat, 18 Apr 2009 07:24:17 +0000 Subject: export usbnet_get_ethernet_addr from usbnet and fixed cdc_ether.c because of using the same function get_ethernet_addr as cdc_ether.c i export usbnet_get_ethernet_addr from usbnet and fixed cdc_ether (suggested by Oliver Neukum). Signed-off-by: Peter Holik Signed-off-by: David S. Miller --- include/linux/usb/usbnet.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 36fabb95c7d3..5d44059f6d63 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -183,6 +183,7 @@ extern void usbnet_tx_timeout (struct net_device *net); extern int usbnet_change_mtu (struct net_device *net, int new_mtu); extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *); +extern int usbnet_get_ethernet_addr(struct usbnet *, int); extern void usbnet_defer_kevent (struct usbnet *, int); extern void usbnet_skb_return (struct usbnet *, struct sk_buff *); extern void usbnet_unlink_rx_urbs(struct usbnet *); -- cgit v1.2.2 From 335f8514f200e63d689113d29cb7253a5c282967 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:26:29 +0100 Subject: tty: Bring the usb tty port structure into more use This allows us to clean stuff up, but is probably also going to cause some app breakage with buggy apps as we now implement proper POSIX behaviour for USB ports matching all the other ports. This does also mean other apps that break on USB will now work properly. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- include/linux/usb/serial.h | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'include/linux/usb') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 625e9e4639c6..8cdfed738fe4 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -224,8 +224,7 @@ struct usb_serial_driver { /* Called by console with tty = NULL and by tty */ int (*open)(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); - void (*close)(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); + void (*close)(struct usb_serial_port *port); int (*write)(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); /* Called only by the tty layer */ @@ -241,6 +240,10 @@ struct usb_serial_driver { int (*tiocmget)(struct tty_struct *tty, struct file *file); int (*tiocmset)(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); + /* Called by the tty layer for port level work. There may or may not + be an attached tty at this point */ + void (*dtr_rts)(struct usb_serial_port *port, int on); + int (*carrier_raised)(struct usb_serial_port *port); /* USB events */ void (*read_int_callback)(struct urb *urb); void (*write_int_callback)(struct urb *urb); @@ -283,8 +286,7 @@ extern int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); extern int usb_serial_generic_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); -extern void usb_serial_generic_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +extern void usb_serial_generic_close(struct usb_serial_port *port); extern int usb_serial_generic_resume(struct usb_serial *serial); extern int usb_serial_generic_write_room(struct tty_struct *tty); extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty); -- cgit v1.2.2 From cc835e321a9f3fa5e083436872e198095f4805b9 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 31 Mar 2009 12:28:31 -0700 Subject: USB: nop-usb-xceiv: behave when linked as a module The NOP OTG transceiver driver needs to be usable from modules. Make sure its symbols are always accessible at both compile and link time, and make sure the device instance is allocated from the heap so that device lifetime rules are obeyed. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/otg.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux/usb') diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 1aaa826396a1..2443c0e7a80c 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -80,10 +80,10 @@ struct otg_transceiver { /* for board-specific init logic */ extern int otg_set_transceiver(struct otg_transceiver *); -#ifdef CONFIG_NOP_USB_XCEIV + +/* sometimes transceivers are accessed only through e.g. ULPI */ extern void usb_nop_xceiv_register(void); extern void usb_nop_xceiv_unregister(void); -#endif /* for usb host and peripheral controller drivers */ -- cgit v1.2.2 From cac85a8b4e8e7c51bc0ce2980bba0e35cfec5c2e Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 29 Apr 2009 21:04:19 -0700 Subject: USB: composite.h: mark private struct members as private: Mark internal struct members as /* private: */ so that kernel-doc won't produce warnings about missing descriptions for them. Signed-off-by: Randy Dunlap Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/composite.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index acd7b0f06c8a..4f6bb3d2160e 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -124,6 +124,7 @@ struct usb_function { void (*suspend)(struct usb_function *); void (*resume)(struct usb_function *); + /* private: */ /* internals */ struct list_head list; }; @@ -219,6 +220,7 @@ struct usb_configuration { struct usb_composite_dev *cdev; + /* private: */ /* internals */ struct list_head list; struct list_head functions; @@ -321,6 +323,7 @@ struct usb_composite_dev { struct usb_configuration *config; + /* private: */ /* internals */ struct usb_device_descriptor desc; struct list_head configs; -- cgit v1.2.2 From 715b1dc01fe44537e8fce9566e4bb48d6821d84b Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Mon, 11 May 2009 15:24:07 -0500 Subject: USB: usb_debug, usb_generic_serial: implement multi urb write The usb_debug driver, when used as the console, will always fail to insert the carriage return and new line sequence as well as randomly drop console output. This is a result of only having the single write_urb and that the tty layer will have a lock that prevents the processing of the back to back urb requests. The solution is to allow more than one urb to be outstanding and have a slightly deeper transmit queue. The idea and some code is borrowed from the ftdi_sio usb driver. The generic usb serial driver was modified so as to allow the classic method of 1 write urb, or a multi write urb scheme with N allowed outstanding urbs where N is controlled by max_in_flight_urbs. When max_in_flight_urbs in a "struct usb_serial_driver" is non zero the multi write urb scheme will be used. The size of 4000 was selected for the usb_debug driver so that the driver lowers possibility of losing the queued console messages during the kernel startup. Signed-off-by: Jason Wessel Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/serial.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 8cdfed738fe4..e2938fd179e2 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -91,6 +91,9 @@ struct usb_serial_port { int write_urb_busy; __u8 bulk_out_endpointAddress; + int tx_bytes_flight; + int urbs_in_flight; + wait_queue_head_t write_wait; struct work_struct work; char throttled; @@ -207,6 +210,7 @@ struct usb_serial_driver { struct device_driver driver; struct usb_driver *usb_driver; struct usb_dynids dynids; + int max_in_flight_urbs; int (*probe)(struct usb_serial *serial, const struct usb_device_id *id); int (*attach)(struct usb_serial *serial); -- cgit v1.2.2 From 98fcb5f78165b8a3d93870ad7afd4d9ebbb8b43a Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Mon, 11 May 2009 15:24:09 -0500 Subject: USB: serial: usb_debug,usb_generic_serial: implement sysrq and serial break The usb_debug driver was modified to implement serial break handling by using a "magic" data packet comprised of the sequence: 0x00 0xff 0x01 0xfe 0x00 0xfe 0x01 0xff When the tty layer requests a serial break the usb_debug driver sends the magic packet. On the receiving side the magic packet is thrown away or a sysrq is activated depending on what kernel .config options have been set. The generic serial driver was modified as well as the usb serial headers to generically implement sysrq processing in the same way the non usb uart based drivers implement the sysrq handling. This will allow other usb serial devices to implement sysrq handling as desired. The new usb serial functions are named similarly and implemented similarly to the uart functions as follows: usb_serial_handle_break <-> uart_handle_break usb_serial_handle_sysrq_char <-> uart_handle_sysrq_char Signed-off-by: Jason Wessel Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/serial.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index e2938fd179e2..e29ebcf3287b 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -15,6 +15,7 @@ #include #include +#include #define SERIAL_TTY_MAJOR 188 /* Nice legal number now */ #define SERIAL_TTY_MINORS 254 /* loads of devices :) */ @@ -99,6 +100,7 @@ struct usb_serial_port { char throttled; char throttle_req; char console; + unsigned long sysrq; /* sysrq timeout */ struct device dev; }; #define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev) @@ -301,6 +303,12 @@ extern void usb_serial_generic_unthrottle(struct tty_struct *tty); extern void usb_serial_generic_shutdown(struct usb_serial *serial); extern int usb_serial_generic_register(int debug); extern void usb_serial_generic_deregister(void); +extern void usb_serial_generic_resubmit_read_urb(struct usb_serial_port *port, + gfp_t mem_flags); +extern int usb_serial_handle_sysrq_char(struct usb_serial_port *port, + unsigned int ch); +extern int usb_serial_handle_break(struct usb_serial_port *port); + extern int usb_serial_bus_register(struct usb_serial_driver *device); extern void usb_serial_bus_deregister(struct usb_serial_driver *device); -- cgit v1.2.2 From 5effabbe9e6e0089f7afdde35cb51e8c8b4cf6bc Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 26 May 2009 18:24:34 +0900 Subject: USB: r8a66597-hcd: use platform_data instead of module_param CPU/board specific parameters (PLL clock, vif etc...) can be set by platform_data instead of module_param. v2: remove irq_sense member in platform_data because it can OR in IRQF_TRIGGER_LOW or IRQF_TRIGGER_FALLING against IORESOURCE_IRQ in the struct resource. Signed-off-by: Yoshihiro Shimoda Reviewed-by: Paul Mundt Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/r8a66597.h | 44 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 include/linux/usb/r8a66597.h (limited to 'include/linux/usb') diff --git a/include/linux/usb/r8a66597.h b/include/linux/usb/r8a66597.h new file mode 100644 index 000000000000..e9f0384fa20c --- /dev/null +++ b/include/linux/usb/r8a66597.h @@ -0,0 +1,44 @@ +/* + * R8A66597 driver platform data + * + * Copyright (C) 2009 Renesas Solutions Corp. + * + * Author : Yoshihiro Shimoda + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#ifndef __LINUX_USB_R8A66597_H +#define __LINUX_USB_R8A66597_H + +#define R8A66597_PLATDATA_XTAL_12MHZ 0x01 +#define R8A66597_PLATDATA_XTAL_24MHZ 0x02 +#define R8A66597_PLATDATA_XTAL_48MHZ 0x03 + +struct r8a66597_platdata { + /* This ops can controll port power instead of DVSTCTR register. */ + void (*port_power)(int port, int power); + + /* (external controller only) set R8A66597_PLATDATA_XTAL_nnMHZ */ + unsigned xtal:2; + + /* set one = 3.3V, set zero = 1.5V */ + unsigned vif:1; + + /* set one = big endian, set zero = little endian */ + unsigned endian:1; +}; +#endif + -- cgit v1.2.2 From c47d7b09891abb4f8b222317c89c7469bed8db3a Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Wed, 3 Jun 2009 09:17:57 -0400 Subject: USB: audio: add USB audio class definitions Signed-off-by: Bryan Wu Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/audio.h | 265 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 263 insertions(+), 2 deletions(-) (limited to 'include/linux/usb') diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h index 8cb025fef634..b5744bc218ab 100644 --- a/include/linux/usb/audio.h +++ b/include/linux/usb/audio.h @@ -24,10 +24,75 @@ #define USB_SUBCLASS_AUDIOCONTROL 0x01 #define USB_SUBCLASS_AUDIOSTREAMING 0x02 #define USB_SUBCLASS_MIDISTREAMING 0x03 +#define USB_SUBCLASS_VENDOR_SPEC 0xff +/* A.5 Audio Class-Specific AC interface Descriptor Subtypes*/ +#define HEADER 0x01 +#define INPUT_TERMINAL 0x02 +#define OUTPUT_TERMINAL 0x03 +#define MIXER_UNIT 0x04 +#define SELECTOR_UNIT 0x05 +#define FEATURE_UNIT 0x06 +#define PROCESSING_UNIT 0x07 +#define EXTENSION_UNIT 0x08 + +#define AS_GENERAL 0x01 +#define FORMAT_TYPE 0x02 +#define FORMAT_SPECIFIC 0x03 + +#define EP_GENERAL 0x01 + +#define MS_GENERAL 0x01 +#define MIDI_IN_JACK 0x02 +#define MIDI_OUT_JACK 0x03 + +/* endpoint attributes */ +#define EP_ATTR_MASK 0x0c +#define EP_ATTR_ASYNC 0x04 +#define EP_ATTR_ADAPTIVE 0x08 +#define EP_ATTR_SYNC 0x0c + +/* cs endpoint attributes */ +#define EP_CS_ATTR_SAMPLE_RATE 0x01 +#define EP_CS_ATTR_PITCH_CONTROL 0x02 +#define EP_CS_ATTR_FILL_MAX 0x80 + +/* Audio Class specific Request Codes */ +#define USB_AUDIO_SET_INTF 0x21 +#define USB_AUDIO_SET_ENDPOINT 0x22 +#define USB_AUDIO_GET_INTF 0xa1 +#define USB_AUDIO_GET_ENDPOINT 0xa2 + +#define SET_ 0x00 +#define GET_ 0x80 + +#define _CUR 0x1 +#define _MIN 0x2 +#define _MAX 0x3 +#define _RES 0x4 +#define _MEM 0x5 + +#define SET_CUR (SET_ | _CUR) +#define GET_CUR (GET_ | _CUR) +#define SET_MIN (SET_ | _MIN) +#define GET_MIN (GET_ | _MIN) +#define SET_MAX (SET_ | _MAX) +#define GET_MAX (GET_ | _MAX) +#define SET_RES (SET_ | _RES) +#define GET_RES (GET_ | _RES) +#define SET_MEM (SET_ | _MEM) +#define GET_MEM (GET_ | _MEM) + +#define GET_STAT 0xff + +#define USB_AC_TERMINAL_UNDEFINED 0x100 +#define USB_AC_TERMINAL_STREAMING 0x101 +#define USB_AC_TERMINAL_VENDOR_SPEC 0x1FF + +/* Terminal Control Selectors */ /* 4.3.2 Class-Specific AC Interface Descriptor */ struct usb_ac_header_descriptor { - __u8 bLength; /* 8+n */ + __u8 bLength; /* 8 + n */ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ __u8 bDescriptorSubtype; /* USB_MS_HEADER */ __le16 bcdADC; /* 0x0100 */ @@ -36,7 +101,7 @@ struct usb_ac_header_descriptor { __u8 baInterfaceNr[]; /* [n] */ } __attribute__ ((packed)); -#define USB_DT_AC_HEADER_SIZE(n) (8+(n)) +#define USB_DT_AC_HEADER_SIZE(n) (8 + (n)) /* As above, but more useful for defining your own descriptors: */ #define DECLARE_USB_AC_HEADER_DESCRIPTOR(n) \ @@ -50,4 +115,200 @@ struct usb_ac_header_descriptor_##n { \ __u8 baInterfaceNr[n]; \ } __attribute__ ((packed)) +/* 4.3.2.1 Input Terminal Descriptor */ +struct usb_input_terminal_descriptor { + __u8 bLength; /* in bytes: 12 */ + __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ + __u8 bDescriptorSubtype; /* INPUT_TERMINAL descriptor subtype */ + __u8 bTerminalID; /* Constant uniquely terminal ID */ + __le16 wTerminalType; /* USB Audio Terminal Types */ + __u8 bAssocTerminal; /* ID of the Output Terminal associated */ + __u8 bNrChannels; /* Number of logical output channels */ + __le16 wChannelConfig; + __u8 iChannelNames; + __u8 iTerminal; +} __attribute__ ((packed)); + +#define USB_DT_AC_INPUT_TERMINAL_SIZE 12 + +#define USB_AC_INPUT_TERMINAL_UNDEFINED 0x200 +#define USB_AC_INPUT_TERMINAL_MICROPHONE 0x201 +#define USB_AC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202 +#define USB_AC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203 +#define USB_AC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204 +#define USB_AC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205 +#define USB_AC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206 + +/* 4.3.2.2 Output Terminal Descriptor */ +struct usb_output_terminal_descriptor { + __u8 bLength; /* in bytes: 9 */ + __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ + __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */ + __u8 bTerminalID; /* Constant uniquely terminal ID */ + __le16 wTerminalType; /* USB Audio Terminal Types */ + __u8 bAssocTerminal; /* ID of the Input Terminal associated */ + __u8 bSourceID; /* ID of the connected Unit or Terminal*/ + __u8 iTerminal; +} __attribute__ ((packed)); + +#define USB_DT_AC_OUTPUT_TERMINAL_SIZE 9 + +#define USB_AC_OUTPUT_TERMINAL_UNDEFINED 0x300 +#define USB_AC_OUTPUT_TERMINAL_SPEAKER 0x301 +#define USB_AC_OUTPUT_TERMINAL_HEADPHONES 0x302 +#define USB_AC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303 +#define USB_AC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304 +#define USB_AC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305 +#define USB_AC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306 +#define USB_AC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307 + +/* Set bControlSize = 2 as default setting */ +#define USB_DT_AC_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2) + +/* As above, but more useful for defining your own descriptors: */ +#define DECLARE_USB_AC_FEATURE_UNIT_DESCRIPTOR(ch) \ +struct usb_ac_feature_unit_descriptor_##ch { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __u8 bUnitID; \ + __u8 bSourceID; \ + __u8 bControlSize; \ + __le16 bmaControls[ch + 1]; \ + __u8 iFeature; \ +} __attribute__ ((packed)) + +/* 4.5.2 Class-Specific AS Interface Descriptor */ +struct usb_as_header_descriptor { + __u8 bLength; /* in bytes: 7 */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* AS_GENERAL */ + __u8 bTerminalLink; /* Terminal ID of connected Terminal */ + __u8 bDelay; /* Delay introduced by the data path */ + __le16 wFormatTag; /* The Audio Data Format */ +} __attribute__ ((packed)); + +#define USB_DT_AS_HEADER_SIZE 7 + +#define USB_AS_AUDIO_FORMAT_TYPE_I_UNDEFINED 0x0 +#define USB_AS_AUDIO_FORMAT_TYPE_I_PCM 0x1 +#define USB_AS_AUDIO_FORMAT_TYPE_I_PCM8 0x2 +#define USB_AS_AUDIO_FORMAT_TYPE_I_IEEE_FLOAT 0x3 +#define USB_AS_AUDIO_FORMAT_TYPE_I_ALAW 0x4 +#define USB_AS_AUDIO_FORMAT_TYPE_I_MULAW 0x5 + +struct usb_as_format_type_i_continuous_descriptor { + __u8 bLength; /* in bytes: 8 + (ns * 3) */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* FORMAT_TYPE */ + __u8 bFormatType; /* FORMAT_TYPE_1 */ + __u8 bNrChannels; /* physical channels in the stream */ + __u8 bSubframeSize; /* */ + __u8 bBitResolution; + __u8 bSamFreqType; + __u8 tLowerSamFreq[3]; + __u8 tUpperSamFreq[3]; +} __attribute__ ((packed)); + +#define USB_AS_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14 + +struct usb_as_formate_type_i_discrete_descriptor { + __u8 bLength; /* in bytes: 8 + (ns * 3) */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* FORMAT_TYPE */ + __u8 bFormatType; /* FORMAT_TYPE_1 */ + __u8 bNrChannels; /* physical channels in the stream */ + __u8 bSubframeSize; /* */ + __u8 bBitResolution; + __u8 bSamFreqType; + __u8 tSamFreq[][3]; +} __attribute__ ((packed)); + +#define DECLARE_USB_AS_FORMAT_TYPE_I_DISCRETE_DESC(n) \ +struct usb_as_formate_type_i_discrete_descriptor_##n { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __u8 bFormatType; \ + __u8 bNrChannels; \ + __u8 bSubframeSize; \ + __u8 bBitResolution; \ + __u8 bSamFreqType; \ + __u8 tSamFreq[n][3]; \ +} __attribute__ ((packed)) + +#define USB_AS_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3)) + +#define USB_AS_FORMAT_TYPE_UNDEFINED 0x0 +#define USB_AS_FORMAT_TYPE_I 0x1 +#define USB_AS_FORMAT_TYPE_II 0x2 +#define USB_AS_FORMAT_TYPE_III 0x3 + +#define USB_AS_ENDPOINT_ASYNC (1 << 2) +#define USB_AS_ENDPOINT_ADAPTIVE (2 << 2) +#define USB_AS_ENDPOINT_SYNC (3 << 2) + +struct usb_as_iso_endpoint_descriptor { + __u8 bLength; /* in bytes: 7 */ + __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ + __u8 bDescriptorSubtype; /* EP_GENERAL */ + __u8 bmAttributes; + __u8 bLockDelayUnits; + __le16 wLockDelay; +}; +#define USB_AS_ISO_ENDPOINT_DESC_SIZE 7 + +#define FU_CONTROL_UNDEFINED 0x00 +#define MUTE_CONTROL 0x01 +#define VOLUME_CONTROL 0x02 +#define BASS_CONTROL 0x03 +#define MID_CONTROL 0x04 +#define TREBLE_CONTROL 0x05 +#define GRAPHIC_EQUALIZER_CONTROL 0x06 +#define AUTOMATIC_GAIN_CONTROL 0x07 +#define DELAY_CONTROL 0x08 +#define BASS_BOOST_CONTROL 0x09 +#define LOUDNESS_CONTROL 0x0a + +#define FU_MUTE (1 << (MUTE_CONTROL - 1)) +#define FU_VOLUME (1 << (VOLUME_CONTROL - 1)) +#define FU_BASS (1 << (BASS_CONTROL - 1)) +#define FU_MID (1 << (MID_CONTROL - 1)) +#define FU_TREBLE (1 << (TREBLE_CONTROL - 1)) +#define FU_GRAPHIC_EQ (1 << (GRAPHIC_EQUALIZER_CONTROL - 1)) +#define FU_AUTO_GAIN (1 << (AUTOMATIC_GAIN_CONTROL - 1)) +#define FU_DELAY (1 << (DELAY_CONTROL - 1)) +#define FU_BASS_BOOST (1 << (BASS_BOOST_CONTROL - 1)) +#define FU_LOUDNESS (1 << (LOUDNESS_CONTROL - 1)) + +struct usb_audio_control { + struct list_head list; + const char *name; + u8 type; + int data[5]; + int (*set)(struct usb_audio_control *con, u8 cmd, int value); + int (*get)(struct usb_audio_control *con, u8 cmd); +}; + +static inline int generic_set_cmd(struct usb_audio_control *con, u8 cmd, int value) +{ + con->data[cmd] = value; + + return 0; +} + +static inline int generic_get_cmd(struct usb_audio_control *con, u8 cmd) +{ + return con->data[cmd]; +} + +struct usb_audio_control_selector { + struct list_head list; + struct list_head control; + u8 id; + const char *name; + u8 type; + struct usb_descriptor_header *desc; +}; + #endif /* __LINUX_USB_AUDIO_H */ -- cgit v1.2.2 From c706ebdfc8955b850e477255a8c0f93f9f14712d Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 2 Jun 2009 11:54:11 -0400 Subject: USB: usb-serial: call port_probe and port_remove at the right times This patch (as1253) prevents the usb-serial core from calling a driver's port_probe and port_remove methods more than once per port. It also removes some unnecessary try_module_get() calls and adds a missing port_remove method call in a failure path. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/serial.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index e29ebcf3287b..ed4aa0fa7ed8 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -27,6 +27,13 @@ /* parity check flag */ #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) +enum port_dev_state { + PORT_UNREGISTERED, + PORT_REGISTERING, + PORT_REGISTERED, + PORT_UNREGISTERING, +}; + /** * usb_serial_port: structure for the specific ports of a device. * @serial: pointer back to the struct usb_serial owner of this port. @@ -102,6 +109,7 @@ struct usb_serial_port { char console; unsigned long sysrq; /* sysrq timeout */ struct device dev; + enum port_dev_state dev_state; }; #define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev) -- cgit v1.2.2 From f9c99bb8b3a1ec81af68d484a551307326c2e933 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 2 Jun 2009 11:53:55 -0400 Subject: USB: usb-serial: replace shutdown with disconnect, release This patch (as1254) splits up the shutdown method of usb_serial_driver into a disconnect and a release method. The problem is that the usb-serial core was calling shutdown during disconnect handling, but drivers didn't expect it to be called until after all the open file references had been closed. The result was an oops when the close method tried to use memory that had been deallocated by shutdown. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/serial.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'include/linux/usb') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index ed4aa0fa7ed8..44801d26a37a 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -194,8 +194,10 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data) * This will be called when the struct usb_serial structure is fully set * set up. Do any local initialization of the device, or any private * memory structure allocation at this point in time. - * @shutdown: pointer to the driver's shutdown function. This will be - * called when the device is removed from the system. + * @disconnect: pointer to the driver's disconnect function. This will be + * called when the device is unplugged or unbound from the driver. + * @release: pointer to the driver's release function. This will be called + * when the usb_serial data structure is about to be destroyed. * @usb_driver: pointer to the struct usb_driver that controls this * device. This is necessary to allow dynamic ids to be added to * the driver from sysfs. @@ -226,7 +228,8 @@ struct usb_serial_driver { int (*attach)(struct usb_serial *serial); int (*calc_num_ports) (struct usb_serial *serial); - void (*shutdown)(struct usb_serial *serial); + void (*disconnect)(struct usb_serial *serial); + void (*release)(struct usb_serial *serial); int (*port_probe)(struct usb_serial_port *port); int (*port_remove)(struct usb_serial_port *port); @@ -308,7 +311,8 @@ extern void usb_serial_generic_read_bulk_callback(struct urb *urb); extern void usb_serial_generic_write_bulk_callback(struct urb *urb); extern void usb_serial_generic_throttle(struct tty_struct *tty); extern void usb_serial_generic_unthrottle(struct tty_struct *tty); -extern void usb_serial_generic_shutdown(struct usb_serial *serial); +extern void usb_serial_generic_disconnect(struct usb_serial *serial); +extern void usb_serial_generic_release(struct usb_serial *serial); extern int usb_serial_generic_register(int debug); extern void usb_serial_generic_deregister(void); extern void usb_serial_generic_resubmit_read_urb(struct usb_serial_port *port, -- cgit v1.2.2 From 5be19a9daa2df2507adf5b4676a7db8d131cf56e Mon Sep 17 00:00:00 2001 From: Xiaochen Shen Date: Thu, 4 Jun 2009 15:34:49 +0800 Subject: USB: Add Intel Langwell USB Device Controller driver Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/langwell_udc.h | 310 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 310 insertions(+) create mode 100644 include/linux/usb/langwell_udc.h (limited to 'include/linux/usb') diff --git a/include/linux/usb/langwell_udc.h b/include/linux/usb/langwell_udc.h new file mode 100644 index 000000000000..c949178a6530 --- /dev/null +++ b/include/linux/usb/langwell_udc.h @@ -0,0 +1,310 @@ +/* + * Intel Langwell USB Device Controller driver + * Copyright (C) 2008-2009, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#ifndef __LANGWELL_UDC_H +#define __LANGWELL_UDC_H + + +/* MACRO defines */ +#define CAP_REG_OFFSET 0x0 +#define OP_REG_OFFSET 0x28 + +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + +#define DQH_ALIGNMENT 2048 +#define DTD_ALIGNMENT 64 +#define DMA_BOUNDARY 4096 + +#define EP0_MAX_PKT_SIZE 64 +#define EP_DIR_IN 1 +#define EP_DIR_OUT 0 + +#define FLUSH_TIMEOUT 1000 +#define RESET_TIMEOUT 1000 +#define SETUPSTAT_TIMEOUT 100 +#define PRIME_TIMEOUT 100 + + +/* device memory space registers */ + +/* Capability Registers, BAR0 + CAP_REG_OFFSET */ +struct langwell_cap_regs { + /* offset: 0x0 */ + u8 caplength; /* offset of Operational Register */ + u8 _reserved3; + u16 hciversion; /* H: BCD encoding of host version */ + u32 hcsparams; /* H: host port steering logic capability */ + u32 hccparams; /* H: host multiple mode control capability */ +#define HCC_LEN BIT(17) /* Link power management (LPM) capability */ + u8 _reserved4[0x20-0xc]; + /* offset: 0x20 */ + u16 dciversion; /* BCD encoding of device version */ + u8 _reserved5[0x24-0x22]; + u32 dccparams; /* overall device controller capability */ +#define HOSTCAP BIT(8) /* host capable */ +#define DEVCAP BIT(7) /* device capable */ +#define DEN(d) \ + (((d)>>0)&0x1f) /* bits 4:0, device endpoint number */ +} __attribute__ ((packed)); + + +/* Operational Registers, BAR0 + OP_REG_OFFSET */ +struct langwell_op_regs { + /* offset: 0x28 */ + u32 extsts; +#define EXTS_TI1 BIT(4) /* general purpose timer interrupt 1 */ +#define EXTS_TI1TI0 BIT(3) /* general purpose timer interrupt 0 */ +#define EXTS_TI1UPI BIT(2) /* USB host periodic interrupt */ +#define EXTS_TI1UAI BIT(1) /* USB host asynchronous interrupt */ +#define EXTS_TI1NAKI BIT(0) /* NAK interrupt */ + u32 extintr; +#define EXTI_TIE1 BIT(4) /* general purpose timer interrupt enable 1 */ +#define EXTI_TIE0 BIT(3) /* general purpose timer interrupt enable 0 */ +#define EXTI_UPIE BIT(2) /* USB host periodic interrupt enable */ +#define EXTI_UAIE BIT(1) /* USB host asynchronous interrupt enable */ +#define EXTI_NAKE BIT(0) /* NAK interrupt enable */ + /* offset: 0x30 */ + u32 usbcmd; +#define CMD_HIRD(u) \ + (((u)>>24)&0xf) /* bits 27:24, host init resume duration */ +#define CMD_ITC(u) \ + (((u)>>16)&0xff) /* bits 23:16, interrupt threshold control */ +#define CMD_PPE BIT(15) /* per-port change events enable */ +#define CMD_ATDTW BIT(14) /* add dTD tripwire */ +#define CMD_SUTW BIT(13) /* setup tripwire */ +#define CMD_ASPE BIT(11) /* asynchronous schedule park mode enable */ +#define CMD_FS2 BIT(10) /* frame list size */ +#define CMD_ASP1 BIT(9) /* asynchronous schedule park mode count */ +#define CMD_ASP0 BIT(8) +#define CMD_LR BIT(7) /* light host/device controller reset */ +#define CMD_IAA BIT(6) /* interrupt on async advance doorbell */ +#define CMD_ASE BIT(5) /* asynchronous schedule enable */ +#define CMD_PSE BIT(4) /* periodic schedule enable */ +#define CMD_FS1 BIT(3) +#define CMD_FS0 BIT(2) +#define CMD_RST BIT(1) /* controller reset */ +#define CMD_RUNSTOP BIT(0) /* run/stop */ + u32 usbsts; +#define STS_PPCI(u) \ + (((u)>>16)&0xffff) /* bits 31:16, port-n change detect */ +#define STS_AS BIT(15) /* asynchronous schedule status */ +#define STS_PS BIT(14) /* periodic schedule status */ +#define STS_RCL BIT(13) /* reclamation */ +#define STS_HCH BIT(12) /* HC halted */ +#define STS_ULPII BIT(10) /* ULPI interrupt */ +#define STS_SLI BIT(8) /* DC suspend */ +#define STS_SRI BIT(7) /* SOF received */ +#define STS_URI BIT(6) /* USB reset received */ +#define STS_AAI BIT(5) /* interrupt on async advance */ +#define STS_SEI BIT(4) /* system error */ +#define STS_FRI BIT(3) /* frame list rollover */ +#define STS_PCI BIT(2) /* port change detect */ +#define STS_UEI BIT(1) /* USB error interrupt */ +#define STS_UI BIT(0) /* USB interrupt */ + u32 usbintr; +/* bits 31:16, per-port interrupt enable */ +#define INTR_PPCE(u) (((u)>>16)&0xffff) +#define INTR_ULPIE BIT(10) /* ULPI enable */ +#define INTR_SLE BIT(8) /* DC sleep/suspend enable */ +#define INTR_SRE BIT(7) /* SOF received enable */ +#define INTR_URE BIT(6) /* USB reset enable */ +#define INTR_AAE BIT(5) /* interrupt on async advance enable */ +#define INTR_SEE BIT(4) /* system error enable */ +#define INTR_FRE BIT(3) /* frame list rollover enable */ +#define INTR_PCE BIT(2) /* port change detect enable */ +#define INTR_UEE BIT(1) /* USB error interrupt enable */ +#define INTR_UE BIT(0) /* USB interrupt enable */ + u32 frindex; /* frame index */ +#define FRINDEX_MASK (0x3fff << 0) + u32 ctrldssegment; /* not used */ + u32 deviceaddr; +#define USBADR_SHIFT 25 +#define USBADR(d) \ + (((d)>>25)&0x7f) /* bits 31:25, device address */ +#define USBADR_MASK (0x7f << 25) +#define USBADRA BIT(24) /* device address advance */ + u32 endpointlistaddr;/* endpoint list top memory address */ +/* bits 31:11, endpoint list pointer */ +#define EPBASE(d) (((d)>>11)&0x1fffff) +#define ENDPOINTLISTADDR_MASK (0x1fffff << 11) + u32 ttctrl; /* H: TT operatin, not used */ + /* offset: 0x50 */ + u32 burstsize; /* burst size of data movement */ +#define TXPBURST(b) \ + (((b)>>8)&0xff) /* bits 15:8, TX burst length */ +#define RXPBURST(b) \ + (((b)>>0)&0xff) /* bits 7:0, RX burst length */ + u32 txfilltuning; /* TX tuning */ + u32 txttfilltuning; /* H: TX TT tuning */ + u32 ic_usb; /* control the IC_USB FS/LS transceiver */ + /* offset: 0x60 */ + u32 ulpi_viewport; /* indirect access to ULPI PHY */ +#define ULPIWU BIT(31) /* ULPI wakeup */ +#define ULPIRUN BIT(30) /* ULPI read/write run */ +#define ULPIRW BIT(29) /* ULPI read/write control */ +#define ULPISS BIT(27) /* ULPI sync state */ +#define ULPIPORT(u) \ + (((u)>>24)&7) /* bits 26:24, ULPI port number */ +#define ULPIADDR(u) \ + (((u)>>16)&0xff) /* bits 23:16, ULPI data address */ +#define ULPIDATRD(u) \ + (((u)>>8)&0xff) /* bits 15:8, ULPI data read */ +#define ULPIDATWR(u) \ + (((u)>>0)&0xff) /* bits 7:0, ULPI date write */ + u8 _reserved6[0x70-0x64]; + /* offset: 0x70 */ + u32 configflag; /* H: not used */ + u32 portsc1; /* port status */ +#define DA(p) \ + (((p)>>25)&0x7f) /* bits 31:25, device address */ +#define PORTS_SSTS (BIT(24) | BIT(23)) /* suspend status */ +#define PORTS_WKOC BIT(22) /* wake on over-current enable */ +#define PORTS_WKDS BIT(21) /* wake on disconnect enable */ +#define PORTS_WKCN BIT(20) /* wake on connect enable */ +#define PORTS_PTC(p) (((p)>>16)&0xf) /* bits 19:16, port test control */ +#define PORTS_PIC (BIT(15) | BIT(14)) /* port indicator control */ +#define PORTS_PO BIT(13) /* port owner */ +#define PORTS_PP BIT(12) /* port power */ +#define PORTS_LS (BIT(11) | BIT(10)) /* line status */ +#define PORTS_SLP BIT(9) /* suspend using L1 */ +#define PORTS_PR BIT(8) /* port reset */ +#define PORTS_SUSP BIT(7) /* suspend */ +#define PORTS_FPR BIT(6) /* force port resume */ +#define PORTS_OCC BIT(5) /* over-current change */ +#define PORTS_OCA BIT(4) /* over-current active */ +#define PORTS_PEC BIT(3) /* port enable/disable change */ +#define PORTS_PE BIT(2) /* port enable/disable */ +#define PORTS_CSC BIT(1) /* connect status change */ +#define PORTS_CCS BIT(0) /* current connect status */ + u8 _reserved7[0xb4-0x78]; + /* offset: 0xb4 */ + u32 devlc; /* control LPM and each USB port behavior */ +/* bits 31:29, parallel transceiver select */ +#define LPM_PTS(d) (((d)>>29)&7) +#define LPM_STS BIT(28) /* serial transceiver select */ +#define LPM_PTW BIT(27) /* parallel transceiver width */ +#define LPM_PSPD(d) (((d)>>25)&3) /* bits 26:25, port speed */ +#define LPM_PSPD_MASK (BIT(26) | BIT(25)) +#define LPM_SPEED_FULL 0 +#define LPM_SPEED_LOW 1 +#define LPM_SPEED_HIGH 2 +#define LPM_SRT BIT(24) /* shorten reset time */ +#define LPM_PFSC BIT(23) /* port force full speed connect */ +#define LPM_PHCD BIT(22) /* PHY low power suspend clock disable */ +#define LPM_STL BIT(16) /* STALL reply to LPM token */ +#define LPM_BA(d) \ + (((d)>>1)&0x7ff) /* bits 11:1, BmAttributes */ +#define LPM_NYT_ACK BIT(0) /* NYET/ACK reply to LPM token */ + u8 _reserved8[0xf4-0xb8]; + /* offset: 0xf4 */ + u32 otgsc; /* On-The-Go status and control */ +#define OTGSC_DPIE BIT(30) /* data pulse interrupt enable */ +#define OTGSC_MSE BIT(29) /* 1 ms timer interrupt enable */ +#define OTGSC_BSEIE BIT(28) /* B session end interrupt enable */ +#define OTGSC_BSVIE BIT(27) /* B session valid interrupt enable */ +#define OTGSC_ASVIE BIT(26) /* A session valid interrupt enable */ +#define OTGSC_AVVIE BIT(25) /* A VBUS valid interrupt enable */ +#define OTGSC_IDIE BIT(24) /* USB ID interrupt enable */ +#define OTGSC_DPIS BIT(22) /* data pulse interrupt status */ +#define OTGSC_MSS BIT(21) /* 1 ms timer interrupt status */ +#define OTGSC_BSEIS BIT(20) /* B session end interrupt status */ +#define OTGSC_BSVIS BIT(19) /* B session valid interrupt status */ +#define OTGSC_ASVIS BIT(18) /* A session valid interrupt status */ +#define OTGSC_AVVIS BIT(17) /* A VBUS valid interrupt status */ +#define OTGSC_IDIS BIT(16) /* USB ID interrupt status */ +#define OTGSC_DPS BIT(14) /* data bus pulsing status */ +#define OTGSC_MST BIT(13) /* 1 ms timer toggle */ +#define OTGSC_BSE BIT(12) /* B session end */ +#define OTGSC_BSV BIT(11) /* B session valid */ +#define OTGSC_ASV BIT(10) /* A session valid */ +#define OTGSC_AVV BIT(9) /* A VBUS valid */ +#define OTGSC_USBID BIT(8) /* USB ID */ +#define OTGSC_HABA BIT(7) /* hw assist B-disconnect to A-connect */ +#define OTGSC_HADP BIT(6) /* hw assist data pulse */ +#define OTGSC_IDPU BIT(5) /* ID pullup */ +#define OTGSC_DP BIT(4) /* data pulsing */ +#define OTGSC_OT BIT(3) /* OTG termination */ +#define OTGSC_HAAR BIT(2) /* hw assist auto reset */ +#define OTGSC_VC BIT(1) /* VBUS charge */ +#define OTGSC_VD BIT(0) /* VBUS discharge */ + u32 usbmode; +#define MODE_VBPS BIT(5) /* R/W VBUS power select */ +#define MODE_SDIS BIT(4) /* R/W stream disable mode */ +#define MODE_SLOM BIT(3) /* R/W setup lockout mode */ +#define MODE_ENSE BIT(2) /* endian select */ +#define MODE_CM(u) (((u)>>0)&3) /* bits 1:0, controller mode */ +#define MODE_IDLE 0 +#define MODE_DEVICE 2 +#define MODE_HOST 3 + u8 _reserved9[0x100-0xfc]; + /* offset: 0x100 */ + u32 endptnak; +#define EPTN(e) \ + (((e)>>16)&0xffff) /* bits 31:16, TX endpoint NAK */ +#define EPRN(e) \ + (((e)>>0)&0xffff) /* bits 15:0, RX endpoint NAK */ + u32 endptnaken; +#define EPTNE(e) \ + (((e)>>16)&0xffff) /* bits 31:16, TX endpoint NAK enable */ +#define EPRNE(e) \ + (((e)>>0)&0xffff) /* bits 15:0, RX endpoint NAK enable */ + u32 endptsetupstat; +#define SETUPSTAT_MASK (0xffff << 0) /* bits 15:0 */ +#define EP0SETUPSTAT_MASK 1 + u32 endptprime; +/* bits 31:16, prime endpoint transmit buffer */ +#define PETB(e) (((e)>>16)&0xffff) +/* bits 15:0, prime endpoint receive buffer */ +#define PERB(e) (((e)>>0)&0xffff) + /* offset: 0x110 */ + u32 endptflush; +/* bits 31:16, flush endpoint transmit buffer */ +#define FETB(e) (((e)>>16)&0xffff) +/* bits 15:0, flush endpoint receive buffer */ +#define FERB(e) (((e)>>0)&0xffff) + u32 endptstat; +/* bits 31:16, endpoint transmit buffer ready */ +#define ETBR(e) (((e)>>16)&0xffff) +/* bits 15:0, endpoint receive buffer ready */ +#define ERBR(e) (((e)>>0)&0xffff) + u32 endptcomplete; +/* bits 31:16, endpoint transmit complete event */ +#define ETCE(e) (((e)>>16)&0xffff) +/* bits 15:0, endpoint receive complete event */ +#define ERCE(e) (((e)>>0)&0xffff) + /* offset: 0x11c */ + u32 endptctrl[16]; +#define EPCTRL_TXE BIT(23) /* TX endpoint enable */ +#define EPCTRL_TXR BIT(22) /* TX data toggle reset */ +#define EPCTRL_TXI BIT(21) /* TX data toggle inhibit */ +#define EPCTRL_TXT(e) (((e)>>18)&3) /* bits 19:18, TX endpoint type */ +#define EPCTRL_TXT_SHIFT 18 +#define EPCTRL_TXD BIT(17) /* TX endpoint data source */ +#define EPCTRL_TXS BIT(16) /* TX endpoint STALL */ +#define EPCTRL_RXE BIT(7) /* RX endpoint enable */ +#define EPCTRL_RXR BIT(6) /* RX data toggle reset */ +#define EPCTRL_RXI BIT(5) /* RX data toggle inhibit */ +#define EPCTRL_RXT(e) (((e)>>2)&3) /* bits 3:2, RX endpoint type */ +#define EPCTRL_RXT_SHIFT 2 /* bits 19:18, TX endpoint type */ +#define EPCTRL_RXD BIT(1) /* RX endpoint data sink */ +#define EPCTRL_RXS BIT(0) /* RX endpoint STALL */ +} __attribute__ ((packed)); + +#endif /* __LANGWELL_UDC_H */ + -- cgit v1.2.2 From 453f77558810ffa669ed5a510a7173ec49def396 Mon Sep 17 00:00:00 2001 From: Hao Wu Date: Thu, 4 Jun 2009 16:06:50 +0800 Subject: USB: Add Intel Langwell USB OTG Transceiver Drive Description: This driver is used for Intel Langwell* USB OTG controller in Intel Moorestown* platform. It tries to implement host/device role switch according to OTG spec. The actual hsot and device functions are accomplished in modified EHCI driver and Intel Langwell USB OTG client controller driver. * Langwell and Moorestown are names used in development. They are not approved official name. Note: This patch is the first version Intel Langwell USB OTG Transceiver driver. The development is not finished, and the bug fixing is on going for some hardware and software issues. The main purpose of this submission is for code view. Supported features: - Data-line Pulsing SRP - Support HNP to switch roles - PCI D0/D3 power management support Known issues: - HNP is only tested with another Moorestown platform. - PCI D0/D3 power management support is not fully tested. - VBus Pulsing SRP is not support in current version. Signed-off-by: Hao Wu Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/langwell_otg.h | 177 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 177 insertions(+) create mode 100644 include/linux/usb/langwell_otg.h (limited to 'include/linux/usb') diff --git a/include/linux/usb/langwell_otg.h b/include/linux/usb/langwell_otg.h new file mode 100644 index 000000000000..e115ae6df1da --- /dev/null +++ b/include/linux/usb/langwell_otg.h @@ -0,0 +1,177 @@ +/* + * Intel Langwell USB OTG transceiver driver + * Copyright (C) 2008, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#ifndef __LANGWELL_OTG_H__ +#define __LANGWELL_OTG_H__ + +/* notify transceiver driver about OTG events */ +extern void langwell_update_transceiver(void); +/* HCD register bus driver */ +extern int langwell_register_host(struct pci_driver *host_driver); +/* HCD unregister bus driver */ +extern void langwell_unregister_host(struct pci_driver *host_driver); +/* DCD register bus driver */ +extern int langwell_register_peripheral(struct pci_driver *client_driver); +/* DCD unregister bus driver */ +extern void langwell_unregister_peripheral(struct pci_driver *client_driver); +/* No silent failure, output warning message */ +extern void langwell_otg_nsf_msg(unsigned long message); + +#define CI_USBCMD 0x30 +# define USBCMD_RST BIT(1) +# define USBCMD_RS BIT(0) +#define CI_USBSTS 0x34 +# define USBSTS_SLI BIT(8) +# define USBSTS_URI BIT(6) +# define USBSTS_PCI BIT(2) +#define CI_PORTSC1 0x74 +# define PORTSC_PP BIT(12) +# define PORTSC_LS (BIT(11) | BIT(10)) +# define PORTSC_SUSP BIT(7) +# define PORTSC_CCS BIT(0) +#define CI_HOSTPC1 0xb4 +# define HOSTPC1_PHCD BIT(22) +#define CI_OTGSC 0xf4 +# define OTGSC_DPIE BIT(30) +# define OTGSC_1MSE BIT(29) +# define OTGSC_BSEIE BIT(28) +# define OTGSC_BSVIE BIT(27) +# define OTGSC_ASVIE BIT(26) +# define OTGSC_AVVIE BIT(25) +# define OTGSC_IDIE BIT(24) +# define OTGSC_DPIS BIT(22) +# define OTGSC_1MSS BIT(21) +# define OTGSC_BSEIS BIT(20) +# define OTGSC_BSVIS BIT(19) +# define OTGSC_ASVIS BIT(18) +# define OTGSC_AVVIS BIT(17) +# define OTGSC_IDIS BIT(16) +# define OTGSC_DPS BIT(14) +# define OTGSC_1MST BIT(13) +# define OTGSC_BSE BIT(12) +# define OTGSC_BSV BIT(11) +# define OTGSC_ASV BIT(10) +# define OTGSC_AVV BIT(9) +# define OTGSC_ID BIT(8) +# define OTGSC_HABA BIT(7) +# define OTGSC_HADP BIT(6) +# define OTGSC_IDPU BIT(5) +# define OTGSC_DP BIT(4) +# define OTGSC_OT BIT(3) +# define OTGSC_HAAR BIT(2) +# define OTGSC_VC BIT(1) +# define OTGSC_VD BIT(0) +# define OTGSC_INTEN_MASK (0x7f << 24) +# define OTGSC_INTSTS_MASK (0x7f << 16) +#define CI_USBMODE 0xf8 +# define USBMODE_CM (BIT(1) | BIT(0)) +# define USBMODE_IDLE 0 +# define USBMODE_DEVICE 0x2 +# define USBMODE_HOST 0x3 + +#define INTR_DUMMY_MASK (USBSTS_SLI | USBSTS_URI | USBSTS_PCI) + +struct otg_hsm { + /* Input */ + int a_bus_resume; + int a_bus_suspend; + int a_conn; + int a_sess_vld; + int a_srp_det; + int a_vbus_vld; + int b_bus_resume; + int b_bus_suspend; + int b_conn; + int b_se0_srp; + int b_sess_end; + int b_sess_vld; + int id; + + /* Internal variables */ + int a_set_b_hnp_en; + int b_srp_done; + int b_hnp_enable; + + /* Timeout indicator for timers */ + int a_wait_vrise_tmout; + int a_wait_bcon_tmout; + int a_aidl_bdis_tmout; + int b_ase0_brst_tmout; + int b_bus_suspend_tmout; + int b_srp_res_tmout; + + /* Informative variables */ + int a_bus_drop; + int a_bus_req; + int a_clr_err; + int a_suspend_req; + int b_bus_req; + + /* Output */ + int drv_vbus; + int loc_conn; + int loc_sof; + + /* Others */ + int b_bus_suspend_vld; +}; + +#define TA_WAIT_VRISE 100 +#define TA_WAIT_BCON 30000 +#define TA_AIDL_BDIS 15000 +#define TB_ASE0_BRST 5000 +#define TB_SE0_SRP 2 +#define TB_SRP_RES 100 +#define TB_BUS_SUSPEND 500 + +struct langwell_otg_timer { + unsigned long expires; /* Number of count increase to timeout */ + unsigned long count; /* Tick counter */ + void (*function)(unsigned long); /* Timeout function */ + unsigned long data; /* Data passed to function */ + struct list_head list; +}; + +struct langwell_otg { + struct otg_transceiver otg; + struct otg_hsm hsm; + void __iomem *regs; + unsigned region; + struct pci_driver *host_ops; + struct pci_driver *client_ops; + struct pci_dev *pdev; + struct work_struct work; + struct workqueue_struct *qwork; + spinlock_t lock; + spinlock_t wq_lock; +}; + +static inline struct langwell_otg *otg_to_langwell(struct otg_transceiver *otg) +{ + return container_of(otg, struct langwell_otg, otg); +} + +#ifdef DEBUG +#define otg_dbg(fmt, args...) \ + printk(KERN_DEBUG fmt , ## args) +#else +#define otg_dbg(fmt, args...) \ + do { } while (0) +#endif /* DEBUG */ +#endif /* __LANGWELL_OTG_H__ */ -- cgit v1.2.2 From 6b403b020c1f42180b14d28d832da61167cff822 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 27 Apr 2009 19:54:10 -0700 Subject: USB: Add SuperSpeed to the list of USB device speeds. Modify the USB core to handle the new USB 3.0 speed, "SuperSpeed". This is 5.0 Gbps (wire speed). There are probably more places that check for speed that I've missed. SuperSpeed devices have a 512 byte endpoint 0 max packet size. This shows up as a bMaxPacketSize0 set to 0x09 (see table 9-8 of the USB 3.0 bus spec). xHCI spec says that the xHC can handle intervals up to 2^15 microframes. That might change when real silicon becomes available. Add FIXME note for SuperSpeed isochronous endpoints. They can transmit up to 16 packets in one "burst" before they wait for an acknowledgment of the packets. They can do up to 3 bursts per microframe (determined by the mult value in the endpoint companion descriptor). The xHCI driver doesn't have support for isoc yet, so fix this later. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/ch9.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index b145119a90da..93bfe6352342 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -752,6 +752,7 @@ enum usb_device_speed { USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ USB_SPEED_HIGH, /* usb 2.0 */ USB_SPEED_VARIABLE, /* wireless (usb 2.5) */ + USB_SPEED_SUPER, /* usb 3.0 */ }; enum usb_device_state { -- cgit v1.2.2 From 663c30d0829d556efabd5fbd98fb8473da7fe694 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 27 Apr 2009 19:58:14 -0700 Subject: USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/ch9.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 93bfe6352342..9e9c5c0a3d72 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -191,6 +191,8 @@ struct usb_ctrlrequest { #define USB_DT_WIRE_ADAPTER 0x21 #define USB_DT_RPIPE 0x22 #define USB_DT_CS_RADIO_CONTROL 0x23 +/* From the USB 3.0 spec */ +#define USB_DT_SS_ENDPOINT_COMP 0x30 /* Conventional codes for class-specific descriptors. The convention is * defined in the USB "Common Class" Spec (3.11). Individual class specs @@ -535,6 +537,20 @@ static inline int usb_endpoint_is_isoc_out( /*-------------------------------------------------------------------------*/ +/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ +struct usb_ep_comp_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bMaxBurst; + __u8 bmAttributes; + __u16 wBytesPerInterval; +} __attribute__ ((packed)); + +#define USB_DT_EP_COMP_SIZE 6 + +/*-------------------------------------------------------------------------*/ + /* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ struct usb_qualifier_descriptor { __u8 bLength; -- cgit v1.2.2 From f0058c627855ecb3b6c7185b7ad1910463c24c42 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 29 Apr 2009 19:06:20 -0700 Subject: USB: Change names of SuperSpeed ep companion descriptor structs. Differentiate between SuperSpeed endpoint companion descriptor and the wireless USB endpoint companion descriptor. Make all structure names for this descriptor have "ss" (SuperSpeed) in them. David Vrabel asked for this change in http://marc.info/?l=linux-usb&m=124091465109367&w=2 Reported-by: David Vrabel Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/ch9.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux/usb') diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 9e9c5c0a3d72..93223638f702 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -538,7 +538,7 @@ static inline int usb_endpoint_is_isoc_out( /*-------------------------------------------------------------------------*/ /* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ -struct usb_ep_comp_descriptor { +struct usb_ss_ep_comp_descriptor { __u8 bLength; __u8 bDescriptorType; @@ -547,7 +547,7 @@ struct usb_ep_comp_descriptor { __u16 wBytesPerInterval; } __attribute__ ((packed)); -#define USB_DT_EP_COMP_SIZE 6 +#define USB_DT_SS_EP_COMP_SIZE 6 /*-------------------------------------------------------------------------*/ -- cgit v1.2.2