From 325a4af60dc945bf2da9cbcdbabb276e312b297c Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 13 Jun 2006 09:59:32 -0700 Subject: [PATCH] USB: move hardware-specific to This moves header files for controller-specific platform data from to to start reducing some clutter. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/isp116x.h | 29 +++++++++++++++++++++++++++++ include/linux/usb/sl811.h | 26 ++++++++++++++++++++++++++ 2 files changed, 55 insertions(+) create mode 100644 include/linux/usb/isp116x.h create mode 100644 include/linux/usb/sl811.h (limited to 'include/linux/usb') diff --git a/include/linux/usb/isp116x.h b/include/linux/usb/isp116x.h new file mode 100644 index 000000000000..436dd8a2b64a --- /dev/null +++ b/include/linux/usb/isp116x.h @@ -0,0 +1,29 @@ + +/* + * Board initialization code should put one of these into dev->platform_data + * and place the isp116x onto platform_bus. + */ + +struct isp116x_platform_data { + /* Enable internal resistors on downstream ports */ + unsigned sel15Kres:1; + /* On-chip overcurrent detection */ + unsigned oc_enable:1; + /* INT output polarity */ + unsigned int_act_high:1; + /* INT edge or level triggered */ + unsigned int_edge_triggered:1; + /* Enable wakeup by devices on usb bus (e.g. wakeup + by attachment/detachment or by device activity + such as moving a mouse). When chosen, this option + prevents stopping internal clock, increasing + thereby power consumption in suspended state. */ + unsigned remote_wakeup_enable:1; + /* Inter-io delay (ns). The chip is picky about access timings; it + expects at least: + 150ns delay between consecutive accesses to DATA_REG, + 300ns delay between access to ADDR_REG and DATA_REG + OE, WE MUST NOT be changed during these intervals + */ + void (*delay) (struct device * dev, int delay); +}; diff --git a/include/linux/usb/sl811.h b/include/linux/usb/sl811.h new file mode 100644 index 000000000000..397ee3b3d7f3 --- /dev/null +++ b/include/linux/usb/sl811.h @@ -0,0 +1,26 @@ + +/* + * board initialization should put one of these into dev->platform_data + * and place the sl811hs onto platform_bus named "sl811-hcd". + */ + +struct sl811_platform_data { + unsigned can_wakeup:1; + + /* given port_power, msec/2 after power on till power good */ + u8 potpg; + + /* mA/2 power supplied on this port (max = default = 250) */ + u8 power; + + /* sl811 relies on an external source of VBUS current */ + void (*port_power)(struct device *dev, int is_on); + + /* pulse sl811 nRST (probably with a GPIO) */ + void (*reset)(struct device *dev); + + // some boards need something like these: + // int (*check_overcurrent)(struct device *dev); + // void (*clock_enable)(struct device *dev, int is_on); +}; + -- cgit v1.2.2