From bb209c8287d2d55ec4a67e3933346e0a3ee0da76 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 26 Jan 2010 17:10:03 +0000 Subject: powerpc/pci: Add calls to set_pcie_port_type() and set_pcie_hotplug_bridge() We are missing these when building the pci_dev from scratch off the Open Firmware device-tree Signed-off-by: Benjamin Herrenschmidt Acked-by: Jesse Barnes --- include/linux/pci.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 174e5392e51e..c1968f464c38 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -756,6 +756,10 @@ pci_power_t pci_target_state(struct pci_dev *dev); int pci_prepare_to_sleep(struct pci_dev *dev); int pci_back_from_sleep(struct pci_dev *dev); +/* For use by arch with custom probe code */ +void set_pcie_port_type(struct pci_dev *pdev); +void set_pcie_hotplug_bridge(struct pci_dev *pdev); + /* Functions for PCI Hotplug drivers to use */ int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap); #ifdef CONFIG_HOTPLUG -- cgit v1.2.2 From 95a8b6efc5d07103583f706c8a5889437d537939 Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Tue, 2 Feb 2010 14:38:13 -0800 Subject: pci: Update pci_set_vga_state() to call arch functions Update pci_set_vga_state to call arch dependent functions to enable Legacy VGA I/O transactions to be redirected to correct target. [akpm@linux-foundation.org: make pci_register_set_vga_state() __init] Signed-off-by: Mike Travis LKML-Reference: <201002022238.o12McE1J018723@imap1.linux-foundation.org> Cc: Thomas Gleixner Cc: Robin Holt Cc: Jack Steiner Cc: Ingo Molnar Cc: Jesse Barnes Cc: David Airlie Signed-off-by: Andrew Morton Signed-off-by: H. Peter Anvin --- include/linux/pci.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 174e5392e51e..5da166e560c2 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -955,6 +955,11 @@ static inline int pci_proc_domain(struct pci_bus *bus) } #endif /* CONFIG_PCI_DOMAINS */ +/* some architectures require additional setup to direct VGA traffic */ +typedef int (*arch_set_vga_state_t)(struct pci_dev *pdev, bool decode, + unsigned int command_bits, bool change_bridge); +extern void pci_register_set_vga_state(arch_set_vga_state_t func); + #else /* CONFIG_PCI is not enabled */ /* -- cgit v1.2.2 From fb8a0d9d1bfd1e4355f307e86a6da7209eefd5f3 Mon Sep 17 00:00:00 2001 From: "Williams, Mitch A" Date: Wed, 10 Feb 2010 01:43:04 +0000 Subject: pci: Add SR-IOV convenience functions and macros Add and export pci_num_vf to allow other subsystems to determine how many virtual function devices are associated with an SR-IOV physical function device. Add macros dev_is_pci, dev_is_ps, and dev_num_vf to make it easier for non-PCI specific code to determine SR-IOV capabilities. Signed-off-by: Mitch Williams Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- include/linux/pci.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 174e5392e51e..59a98e2ee2c6 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -612,6 +612,9 @@ extern void pci_remove_bus_device(struct pci_dev *dev); extern void pci_stop_bus_device(struct pci_dev *dev); void pci_setup_cardbus(struct pci_bus *bus); extern void pci_sort_breadthfirst(void); +#define dev_is_pci(d) ((d)->bus == &pci_bus_type) +#define dev_is_pf(d) ((dev_is_pci(d) ? to_pci_dev(d)->is_physfn : false)) +#define dev_num_vf(d) ((dev_is_pci(d) ? pci_num_vf(to_pci_dev(d)) : 0)) /* Generic PCI functions exported to card drivers */ @@ -1129,6 +1132,9 @@ static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus, unsigned int devfn) { return NULL; } +#define dev_is_pci(d) (false) +#define dev_is_pf(d) (false) +#define dev_num_vf(d) (0) #endif /* CONFIG_PCI */ /* Include architecture-dependent settings and functions */ @@ -1286,6 +1292,7 @@ void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar); extern int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn); extern void pci_disable_sriov(struct pci_dev *dev); extern irqreturn_t pci_sriov_migration(struct pci_dev *dev); +extern int pci_num_vf(struct pci_dev *dev); #else static inline int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn) { @@ -1298,6 +1305,10 @@ static inline irqreturn_t pci_sriov_migration(struct pci_dev *dev) { return IRQ_NONE; } +static inline int pci_num_vf(struct pci_dev *dev) +{ + return 0; +} #endif #if defined(CONFIG_HOTPLUG_PCI) || defined(CONFIG_HOTPLUG_PCI_MODULE) -- cgit v1.2.2 From cf4c43dd439b90a1a876b3f836ebe745abb9a269 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 15 Jul 2009 13:13:00 -0700 Subject: PCI: Add pci_bus_find_ext_capability For use by code that needs to walk extended capability lists before pci_dev structures are set up. Signed-off-by: Jesse Barnes LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80CFD@orsmsx508.amr.corp.intel.com> Signed-off-by: Jacob Pan Signed-off-by: H. Peter Anvin --- include/linux/pci.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index c1968f464c38..65f8a8f9d3e5 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -631,6 +631,8 @@ enum pci_lost_interrupt_reason pci_lost_interrupt(struct pci_dev *dev); int pci_find_capability(struct pci_dev *dev, int cap); int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap); int pci_find_ext_capability(struct pci_dev *dev, int cap); +int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn, + int cap); int pci_find_ht_capability(struct pci_dev *dev, int ht_cap); int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap); struct pci_bus *pci_find_next_bus(const struct pci_bus *from); -- cgit v1.2.2 From 536c8cb49eccd4f753b4782e7e975ef87359cb44 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Sun, 13 Dec 2009 08:11:31 -0500 Subject: PCI: Unify pcie_link_speed and pci_bus_speed These enums must not overlap anyway, since we only have a single pci_bus_speed_strings array. Use a single enum, and move it to pci.h. Add 'SPEED' to the pcie names to make it clear what they are. Signed-off-by: Matthew Wilcox Signed-off-by: Jesse Barnes --- include/linux/pci.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index c1968f464c38..d76a8a0b6b53 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -187,6 +187,27 @@ enum pci_bus_flags { PCI_BUS_FLAGS_NO_MMRBC = (__force pci_bus_flags_t) 2, }; +/* Based on the PCI Hotplug Spec, but some values are made up by us */ +enum pci_bus_speed { + PCI_SPEED_33MHz = 0x00, + PCI_SPEED_66MHz = 0x01, + PCI_SPEED_66MHz_PCIX = 0x02, + PCI_SPEED_100MHz_PCIX = 0x03, + PCI_SPEED_133MHz_PCIX = 0x04, + PCI_SPEED_66MHz_PCIX_ECC = 0x05, + PCI_SPEED_100MHz_PCIX_ECC = 0x06, + PCI_SPEED_133MHz_PCIX_ECC = 0x07, + PCI_SPEED_66MHz_PCIX_266 = 0x09, + PCI_SPEED_100MHz_PCIX_266 = 0x0a, + PCI_SPEED_133MHz_PCIX_266 = 0x0b, + PCI_SPEED_66MHz_PCIX_533 = 0x11, + PCI_SPEED_100MHz_PCIX_533 = 0x12, + PCI_SPEED_133MHz_PCIX_533 = 0x13, + PCIE_SPEED_2_5GT = 0x14, + PCIE_SPEED_5_0GT = 0x15, + PCI_SPEED_UNKNOWN = 0xff, +}; + struct pci_cap_saved_state { struct hlist_node next; char cap_nr; -- cgit v1.2.2 From 3749c51ac6c1560aa1cb1520066bed84c6f8152a Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Sun, 13 Dec 2009 08:11:32 -0500 Subject: PCI: Make current and maximum bus speeds part of the PCI core Move the max_bus_speed and cur_bus_speed into the pci_bus. Expose the values through the PCI slot driver instead of the hotplug slot driver. Update all the hotplug drivers to use the pci_bus instead of their own data structures. Signed-off-by: Matthew Wilcox Signed-off-by: Jesse Barnes --- include/linux/pci.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index d76a8a0b6b53..a446097a9f68 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -380,6 +380,8 @@ struct pci_bus { unsigned char primary; /* number of primary bridge */ unsigned char secondary; /* number of secondary bridge */ unsigned char subordinate; /* max number of subordinate buses */ + unsigned char max_bus_speed; /* enum pci_bus_speed */ + unsigned char cur_bus_speed; /* enum pci_bus_speed */ char name[48]; @@ -610,6 +612,7 @@ struct pci_bus *pci_create_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata); struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr); +void pcie_update_link_speed(struct pci_bus *bus, u16 link_status); struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr, const char *name, struct hotplug_slot *hotplug); -- cgit v1.2.2 From 45b4cdd57ef0e57555b2ab61b584784819b39365 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Sun, 13 Dec 2009 08:11:34 -0500 Subject: PCI: Add support for AGP in cur/max bus speed Take advantage of some gaps in the table to fit in support for AGP speeds. Signed-off-by: Matthew Wilcox Signed-off-by: Jesse Barnes --- include/linux/pci.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index a446097a9f68..842adaad312e 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -200,6 +200,11 @@ enum pci_bus_speed { PCI_SPEED_66MHz_PCIX_266 = 0x09, PCI_SPEED_100MHz_PCIX_266 = 0x0a, PCI_SPEED_133MHz_PCIX_266 = 0x0b, + AGP_UNKNOWN = 0x0c, + AGP_1X = 0x0d, + AGP_2X = 0x0e, + AGP_4X = 0x0f, + AGP_8X = 0x10, PCI_SPEED_66MHz_PCIX_533 = 0x11, PCI_SPEED_100MHz_PCIX_533 = 0x12, PCI_SPEED_133MHz_PCIX_533 = 0x13, -- cgit v1.2.2 From 9dfd97fe12f79ec8b68feb63912a4ef2f31f571a Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Sun, 13 Dec 2009 08:11:35 -0500 Subject: PCI: Add support for reporting PCIe 3.0 speeds Add the 8.0 GT/s speed. Signed-off-by: Matthew Wilcox Signed-off-by: Jesse Barnes --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 842adaad312e..0c3a29444f89 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -210,6 +210,7 @@ enum pci_bus_speed { PCI_SPEED_133MHz_PCIX_533 = 0x13, PCIE_SPEED_2_5GT = 0x14, PCIE_SPEED_5_0GT = 0x15, + PCIE_SPEED_8_0GT = 0x16, PCI_SPEED_UNKNOWN = 0xff, }; -- cgit v1.2.2 From 93177a748ba0d4f3d3e51c8e6c785773bf6a70df Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 2 Jan 2010 22:57:24 +0100 Subject: PCI: Clean up build for CONFIG_PCI_QUIRKS unset Currently, drivers/pci/quirks.c is built unconditionally, but if CONFIG_PCI_QUIRKS is unset, the only things actually built in this file are definitions of global variables and empty functions (due to the #ifdef CONFIG_PCI_QUIRKS embracing all of the code inside the file). This is not particularly nice and if someone overlooks the #ifdef CONFIG_PCI_QUIRKS, build errors are introduced. To clean that up, move the definitions of the global variables in quirks.c that are always built to pci.c, move the definitions of the empty functions (compiled when CONFIG_PCI_QUIRKS is unset) to headers (additionally make these functions static inline) and modify drivers/pci/Makefile so that quirks.c is only built if CONFIG_PCI_QUIRKS is set. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- include/linux/pci.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 0c3a29444f89..16f48e7506ed 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1271,8 +1271,12 @@ enum pci_fixup_pass { DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \ suspend##vendor##device##hook, vendor, device, hook) - +#ifdef CONFIG_PCI_QUIRKS void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev); +#else +static inline void pci_fixup_device(enum pci_fixup_pass pass, + struct pci_dev *dev) {} +#endif void __iomem *pcim_iomap(struct pci_dev *pdev, int bar, unsigned long maxlen); void pcim_iounmap(struct pci_dev *pdev, void __iomem *addr); -- cgit v1.2.2 From b26b2d494b659f988b4d75eb394dfa0ddac415c9 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Fri, 1 Jan 2010 17:40:49 +0100 Subject: resource/PCI: align functions now return start of resource As suggested by Linus, align functions should return the start of a resource, not void. An update of "res->start" is no longer necessary. Cc: Bjorn Helgaas Cc: Yinghai Lu Signed-off-by: Dominik Brodowski Signed-off-by: Jesse Barnes --- include/linux/pci.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 16f48e7506ed..1bd9f52b24b8 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -592,7 +592,8 @@ int __must_check pcibios_enable_device(struct pci_dev *, int mask); char *pcibios_setup(char *str); /* Used only when drivers/pci/setup.c is used */ -void pcibios_align_resource(void *, struct resource *, resource_size_t, +resource_size_t pcibios_align_resource(void *, struct resource *, + resource_size_t, resource_size_t); void pcibios_update_irq(struct pci_dev *, int irq); @@ -827,8 +828,9 @@ int __must_check pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, resource_size_t size, resource_size_t align, resource_size_t min, unsigned int type_mask, - void (*alignf)(void *, struct resource *, - resource_size_t, resource_size_t), + resource_size_t (*alignf)(void *, struct resource *, + resource_size_t, + resource_size_t), void *alignf_data); void pci_enable_bridges(struct pci_bus *bus); -- cgit v1.2.2 From 3b7a17fcdae532d29dffab9d564a28be08960988 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Fri, 1 Jan 2010 17:40:50 +0100 Subject: resource/PCI: mark struct resource as const Now that we return the new resource start position, there is no need to update "struct resource" inside the align function. Therefore, mark the struct resource as const. Cc: Bjorn Helgaas Cc: Yinghai Lu Signed-off-by: Dominik Brodowski Signed-off-by: Jesse Barnes --- include/linux/pci.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 1bd9f52b24b8..449d51560fc2 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -592,7 +592,7 @@ int __must_check pcibios_enable_device(struct pci_dev *, int mask); char *pcibios_setup(char *str); /* Used only when drivers/pci/setup.c is used */ -resource_size_t pcibios_align_resource(void *, struct resource *, +resource_size_t pcibios_align_resource(void *, const struct resource *, resource_size_t, resource_size_t); void pcibios_update_irq(struct pci_dev *, int irq); @@ -828,7 +828,8 @@ int __must_check pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, resource_size_t size, resource_size_t align, resource_size_t min, unsigned int type_mask, - resource_size_t (*alignf)(void *, struct resource *, + resource_size_t (*alignf)(void *, + const struct resource *, resource_size_t, resource_size_t), void *alignf_data); -- cgit v1.2.2 From 41a68a748bbc61f5bcea999e33ba72926dfbe6f7 Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Mon, 18 Jan 2010 17:24:10 +0100 Subject: PCI: push deprecated pci_find_device() function to last user The ISDN4Linux HiSax driver family contains the last remaining users of the deprecated pci_find_device() function. This patch creates a private copy of that function in HiSax, and removes the now unused global function together with its controlling configuration option, CONFIG_PCI_LEGACY. Signed-off-by: Tilman Schmidt Signed-off-by: Jesse Barnes --- include/linux/pci.h | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 449d51560fc2..8b79403cc072 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -646,12 +646,6 @@ extern void pci_sort_breadthfirst(void); /* Generic PCI functions exported to card drivers */ -#ifdef CONFIG_PCI_LEGACY -struct pci_dev __deprecated *pci_find_device(unsigned int vendor, - unsigned int device, - struct pci_dev *from); -#endif /* CONFIG_PCI_LEGACY */ - enum pci_lost_interrupt_reason { PCI_LOST_IRQ_NO_INFORMATION = 0, PCI_LOST_IRQ_DISABLE_MSI, @@ -1010,13 +1004,6 @@ static inline int pci_proc_domain(struct pci_bus *bus) _PCI_NOP_ALL(read, *) _PCI_NOP_ALL(write,) -static inline struct pci_dev *pci_find_device(unsigned int vendor, - unsigned int device, - struct pci_dev *from) -{ - return NULL; -} - static inline struct pci_dev *pci_get_device(unsigned int vendor, unsigned int device, struct pci_dev *from) -- cgit v1.2.2 From 6841ec681a88b66651e4563040b9c7a7ad25d7b5 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 22 Jan 2010 01:02:25 -0800 Subject: PCI: introduce pci_assign_unassigned_bridge_resources For use by pciehp. pci_setup_bridge() will not check enabled for the slot bridge, otherwise update res is not updated to bridge BAR. That is, bridge is already enabled for port service. Signed-off-by: Yinghai Lu Reviewed-by: Alex Chiang Signed-off-by: Jesse Barnes --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 8b79403cc072..f0c056780a1f 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -801,6 +801,7 @@ void pci_bus_assign_resources(const struct pci_bus *bus); void pci_bus_size_bridges(struct pci_bus *bus); int pci_claim_resource(struct pci_dev *, int); void pci_assign_unassigned_resources(void); +void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge); void pdev_enable_device(struct pci_dev *); void pdev_sort_resources(struct pci_dev *, struct resource_list *); int pci_enable_resources(struct pci_dev *, int mask); -- cgit v1.2.2 From 6d3be84aab461815978d970aa45f5bc9e52dd772 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 9 Feb 2010 12:21:27 +0900 Subject: PCI: mark is_pcie obsolete The "is_pcie" field in struct pci_dev is no longer needed because struct pci_dev has PCIe capability offset in "pcie_cap" field and (pcie_cap != 0) means the device is PCIe capable. This patch marks "is_pcie" fields obsolete. Current users of "is_pcie" field are: - drivers/ssb/scan.c - drivers/net/wireless/ath/ath9k/pci.c - drivers/net/wireless/ath/ath5k/attach.c - drivers/net/wireless/ath/ath5k/reset.c - drivers/acpi/hest.c - drivers/pci/pcie/pme/pcie_pme.c Will post patches for each to use pci_is_pcie() as a follow-up. Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- include/linux/pci.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index f0c056780a1f..578a0770961a 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -302,7 +302,8 @@ struct pci_dev { unsigned int msix_enabled:1; unsigned int ari_enabled:1; /* ARI forwarding */ unsigned int is_managed:1; - unsigned int is_pcie:1; + unsigned int is_pcie:1; /* Obsolete. Will be removed. + Use pci_is_pcie() instead */ unsigned int needs_freset:1; /* Dev requires fundamental reset */ unsigned int state_saved:1; unsigned int is_physfn:1; -- cgit v1.2.2 From c7f486567c1d0acd2e4166c47069835b9f75e77b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 17 Feb 2010 23:39:08 +0100 Subject: PCI PM: PCIe PME root port service driver PCIe native PME detection mechanism is based on interrupts generated by root ports or event collectors every time a PCIe device sends a PME message upstream. Once a PME message has been sent by an endpoint device and received by its root port (or event collector in the case of root complex integrated endpoints), the Requester ID from the message header is registered in the root port's Root Status register. At the same time, the PME Status bit of the Root Status register is set to indicate that there's a PME to handle. If PCIe PME interrupt is enabled for the root port, it generates an interrupt once the PME Status has been set. After receiving the interrupt, the kernel can identify the PCIe device that generated the PME using the Requester ID from the root port's Root Status register. [For details, see PCI Express Base Specification, Rev. 2.0.] Implement a driver for the PCIe PME root port service working in accordance with the above description. Based on a patch from Shaohua Li . Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 578a0770961a..9fe4b2089b78 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -266,6 +266,7 @@ struct pci_dev { configuration space */ unsigned int pme_support:5; /* Bitmask of states from which PME# can be generated */ + unsigned int pme_interrupt:1; unsigned int d1_support:1; /* Low power state D1 is supported */ unsigned int d2_support:1; /* Low power state D2 is supported */ unsigned int no_d1d2:1; /* Only allow D0 and D3 */ -- cgit v1.2.2 From b67ea76172d4b1922c4b3c46c8ea8e9fec1ff38c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 17 Feb 2010 23:44:09 +0100 Subject: PCI / ACPI / PM: Platform support for PCI PME wake-up Although the majority of PCI devices can generate PMEs that in principle may be used to wake up devices suspended at run time, platform support is generally necessary to convert PMEs into wake-up events that can be delivered to the kernel. If ACPI is used for this purpose, PME signals generated by a PCI device will trigger the ACPI GPE associated with the device to generate an ACPI wake-up event that we can set up a handler for, provided that everything is configured correctly. Unfortunately, the subset of PCI devices that have GPEs associated with them is quite limited. The devices without dedicated GPEs have to rely on the GPEs associated with other devices (in the majority of cases their upstream bridges and, possibly, the root bridge) to generate ACPI wake-up events in response to PME signals from them. Add ACPI platform support for PCI PME wake-up: o Add a framework making is possible to use ACPI system notify handlers for run-time PM. o Add new PCI platform callback ->run_wake() to struct pci_platform_pm_ops allowing us to enable/disable the platform to generate wake-up events for given device. Implemet this callback for the ACPI platform. o Define ACPI wake-up handlers for PCI devices and PCI root buses and make the PCI-ACPI binding code register wake-up notifiers for all PCI devices present in the ACPI tables. o Add function pci_dev_run_wake() which can be used by PCI drivers to check if given device is capable of generating wake-up events at run time. Developed in cooperation with Matthew Garrett . Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 9fe4b2089b78..3f787ce78bd1 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -782,6 +782,7 @@ int pci_wake_from_d3(struct pci_dev *dev, bool enable); pci_power_t pci_target_state(struct pci_dev *dev); int pci_prepare_to_sleep(struct pci_dev *dev); int pci_back_from_sleep(struct pci_dev *dev); +bool pci_dev_run_wake(struct pci_dev *dev); /* For use by arch with custom probe code */ void set_pcie_port_type(struct pci_dev *pdev); -- cgit v1.2.2 From 6cbf82148ff286ec22a55be6836c3a5bffc489c1 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 17 Feb 2010 23:44:58 +0100 Subject: PCI PM: Run-time callbacks for PCI bus type Introduce run-time PM callbacks for the PCI bus type. Make the new callbacks work in analogy with the existing system sleep PM callbacks, so that the drivers already converted to struct dev_pm_ops can use their suspend and resume routines for run-time PM without modifications. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- include/linux/pci.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 3f787ce78bd1..1a29f9f6b2dc 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -777,13 +777,20 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state); pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state); bool pci_pme_capable(struct pci_dev *dev, pci_power_t state); void pci_pme_active(struct pci_dev *dev, bool enable); -int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable); +int __pci_enable_wake(struct pci_dev *dev, pci_power_t state, + bool runtime, bool enable); int pci_wake_from_d3(struct pci_dev *dev, bool enable); pci_power_t pci_target_state(struct pci_dev *dev); int pci_prepare_to_sleep(struct pci_dev *dev); int pci_back_from_sleep(struct pci_dev *dev); bool pci_dev_run_wake(struct pci_dev *dev); +static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state, + bool enable) +{ + return __pci_enable_wake(dev, state, false, enable); +} + /* For use by arch with custom probe code */ void set_pcie_port_type(struct pci_dev *pdev); void set_pcie_hotplug_bridge(struct pci_dev *pdev); -- cgit v1.2.2 From 89a74ecccd1f78e51faf6287e5c0e93a92ac096e Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 23 Feb 2010 10:24:31 -0700 Subject: PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs No functional change; this converts loops that iterate from 0 to PCI_BUS_NUM_RESOURCES through pci_bus resource[] table to use the pci_bus_for_each_resource() iterator instead. This doesn't change the way resources are stored; it merely removes dependencies on the fact that they're in a table. Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- include/linux/pci.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 1a29f9f6b2dc..2ff9d26a078f 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -829,6 +829,9 @@ int pci_request_selected_regions_exclusive(struct pci_dev *, int, const char *); void pci_release_selected_regions(struct pci_dev *, int); /* drivers/pci/bus.c */ +#define pci_bus_for_each_resource(bus, res, i) \ + for (i = 0; res = bus->resource[i], i < PCI_BUS_NUM_RESOURCES; i++) + int __must_check pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, resource_size_t size, resource_size_t align, resource_size_t min, -- cgit v1.2.2 From 2fe2abf896c1e7a0ee65faaf3ef0ce654848abbd Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 23 Feb 2010 10:24:36 -0700 Subject: PCI: augment bus resource table with a list Previously we used a table of size PCI_BUS_NUM_RESOURCES (16) for resources forwarded to a bus by its upstream bridge. We've increased this size several times when the table overflowed. But there's no good limit on the number of resources because host bridges and subtractive decode bridges can forward any number of ranges to their secondary buses. This patch reduces the table to only PCI_BRIDGE_RESOURCE_NUM (4) entries, which corresponds to the number of windows a PCI-to-PCI (3) or CardBus (4) bridge can positively decode. Any additional resources, e.g., PCI host bridge windows or subtractively-decoded regions, are kept in a list. I'd prefer a single list rather than this split table/list approach, but that requires simultaneous changes to every architecture. This approach only requires immediate changes where we set up (a) host bridges with more than four windows and (b) subtractive-decode P2P bridges, and we can incrementally change other architectures to use the list. Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- include/linux/pci.h | 35 +++++++++++++++++++++++++++++------ 1 file changed, 29 insertions(+), 6 deletions(-) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 2ff9d26a078f..e19a69613d8f 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -364,9 +364,26 @@ static inline void pci_add_saved_cap(struct pci_dev *pci_dev, hlist_add_head(&new_cap->next, &pci_dev->saved_cap_space); } -#ifndef PCI_BUS_NUM_RESOURCES -#define PCI_BUS_NUM_RESOURCES 16 -#endif +/* + * The first PCI_BRIDGE_RESOURCE_NUM PCI bus resources (those that correspond + * to P2P or CardBus bridge windows) go in a table. Additional ones (for + * buses below host bridges or subtractive decode bridges) go in the list. + * Use pci_bus_for_each_resource() to iterate through all the resources. + */ + +/* + * PCI_SUBTRACTIVE_DECODE means the bridge forwards the window implicitly + * and there's no way to program the bridge with the details of the window. + * This does not apply to ACPI _CRS windows, even with the _DEC subtractive- + * decode bit set, because they are explicit and can be programmed with _SRS. + */ +#define PCI_SUBTRACTIVE_DECODE 0x1 + +struct pci_bus_resource { + struct list_head list; + struct resource *res; + unsigned int flags; +}; #define PCI_REGION_FLAG_MASK 0x0fU /* These bits of resource flags tell us the PCI region flags */ @@ -377,8 +394,8 @@ struct pci_bus { struct list_head devices; /* list of devices on this bus */ struct pci_dev *self; /* bridge device as seen by parent */ struct list_head slots; /* list of slots on this bus */ - struct resource *resource[PCI_BUS_NUM_RESOURCES]; - /* address space routed to this bus */ + struct resource *resource[PCI_BRIDGE_RESOURCE_NUM]; + struct list_head resources; /* address space routed to this bus */ struct pci_ops *ops; /* configuration access functions */ void *sysdata; /* hook for sys-specific extension */ @@ -829,8 +846,14 @@ int pci_request_selected_regions_exclusive(struct pci_dev *, int, const char *); void pci_release_selected_regions(struct pci_dev *, int); /* drivers/pci/bus.c */ +void pci_bus_add_resource(struct pci_bus *bus, struct resource *res, unsigned int flags); +struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n); +void pci_bus_remove_resources(struct pci_bus *bus); + #define pci_bus_for_each_resource(bus, res, i) \ - for (i = 0; res = bus->resource[i], i < PCI_BUS_NUM_RESOURCES; i++) + for (i = 0; \ + (res = pci_bus_resource_n(bus, i)) || i < PCI_BRIDGE_RESOURCE_NUM; \ + i++) int __must_check pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, resource_size_t size, -- cgit v1.2.2 From a2ce766238f72ff7337606c0bc96803c30c9e05c Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Fri, 26 Feb 2010 14:04:39 +0000 Subject: pci: Add PCI LRDT tag size and section size This patch adds a preprocessor constant to describe the PCI VPD large resource data type tag size and an inline function to extract the large resource section size from the large resource data type tag. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Acked-by: Jesse Barnes Signed-off-by: David S. Miller --- include/linux/pci.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index e2575f86133a..6f62a499023f 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1349,5 +1349,19 @@ static inline bool pci_is_pcie(struct pci_dev *dev) void pci_request_acs(void); + +#define PCI_VPD_LRDT_TAG_SIZE 3 + +/** + * pci_vpd_lrdt_size - Extracts the Large Resource Data Type length + * @lrdt: Pointer to the beginning of the Large Resource Data Type tag + * + * Returns the extracted Large Resource Data Type length. + */ +static inline u16 pci_vpd_lrdt_size(const u8 *lrdt) +{ + return (u16)lrdt[1] + ((u16)lrdt[2] << 8); +} + #endif /* __KERNEL__ */ #endif /* LINUX_PCI_H */ -- cgit v1.2.2 From 7ad506fa1adc2da3d394c562f09b8e1b3026c402 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Fri, 26 Feb 2010 14:04:40 +0000 Subject: pci: Add large and small resource data type code This patch introduces more VPD preprocessor definitions to identify some small and large resource data type item names. The patch then continues to correct how the tg3 and bnx2 drivers search for the "read-only data" large resource data type. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Acked-by: Jesse Barnes Signed-off-by: David S. Miller --- include/linux/pci.h | 34 +++++++++++++++++++++++++++++++++- 1 file changed, 33 insertions(+), 1 deletion(-) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 6f62a499023f..198d062640b7 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1350,7 +1350,28 @@ static inline bool pci_is_pcie(struct pci_dev *dev) void pci_request_acs(void); -#define PCI_VPD_LRDT_TAG_SIZE 3 +#define PCI_VPD_LRDT 0x80 /* Large Resource Data Type */ +#define PCI_VPD_LRDT_ID(x) (x | PCI_VPD_LRDT) + +/* Large Resource Data Type Tag Item Names */ +#define PCI_VPD_LTIN_ID_STRING 0x02 /* Identifier String */ +#define PCI_VPD_LTIN_RO_DATA 0x10 /* Read-Only Data */ +#define PCI_VPD_LTIN_RW_DATA 0x11 /* Read-Write Data */ + +#define PCI_VPD_LRDT_ID_STRING PCI_VPD_LRDT_ID(PCI_VPD_LTIN_ID_STRING) +#define PCI_VPD_LRDT_RO_DATA PCI_VPD_LRDT_ID(PCI_VPD_LTIN_RO_DATA) +#define PCI_VPD_LRDT_RW_DATA PCI_VPD_LRDT_ID(PCI_VPD_LTIN_RW_DATA) + +/* Small Resource Data Type Tag Item Names */ +#define PCI_VPD_STIN_END 0x78 /* End */ + +#define PCI_VPD_SRDT_END PCI_VPD_STIN_END + +#define PCI_VPD_SRDT_TIN_MASK 0x78 +#define PCI_VPD_SRDT_LEN_MASK 0x07 + +#define PCI_VPD_LRDT_TAG_SIZE 3 +#define PCI_VPD_SRDT_TAG_SIZE 1 /** * pci_vpd_lrdt_size - Extracts the Large Resource Data Type length @@ -1363,5 +1384,16 @@ static inline u16 pci_vpd_lrdt_size(const u8 *lrdt) return (u16)lrdt[1] + ((u16)lrdt[2] << 8); } +/** + * pci_vpd_srdt_size - Extracts the Small Resource Data Type length + * @lrdt: Pointer to the beginning of the Small Resource Data Type tag + * + * Returns the extracted Small Resource Data Type length. + */ +static inline u8 pci_vpd_srdt_size(const u8 *srdt) +{ + return (*srdt) & PCI_VPD_SRDT_LEN_MASK; +} + #endif /* __KERNEL__ */ #endif /* LINUX_PCI_H */ -- cgit v1.2.2 From b55ac1b22690d2e5b02a61cf6d69c2d66969c79d Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Fri, 26 Feb 2010 14:04:41 +0000 Subject: pci: Add helper to find a VPD resource data type This patch adds the pci_vpd_find_tag() helper function to find VPD resource data types in a buffer. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Acked-by: Jesse Barnes Signed-off-by: David S. Miller --- include/linux/pci.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 198d062640b7..e30ceea7345b 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1395,5 +1395,17 @@ static inline u8 pci_vpd_srdt_size(const u8 *srdt) return (*srdt) & PCI_VPD_SRDT_LEN_MASK; } +/** + * pci_vpd_find_tag - Locates the Resource Data Type tag provided + * @buf: Pointer to buffered vpd data + * @off: The offset into the buffer at which to begin the search + * @len: The length of the vpd buffer + * @rdt: The Resource Data Type to search for + * + * Returns the index where the Resource Data Type was found or + * -ENOENT otherwise. + */ +int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt); + #endif /* __KERNEL__ */ #endif /* LINUX_PCI_H */ -- cgit v1.2.2 From e1d5bdabb94da89bdb3c3f2ee105cf61fca88ec8 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Fri, 26 Feb 2010 14:04:42 +0000 Subject: pci: Add VPD information field helper functions This patch adds a preprocessor constant to describe the PCI VPD information field header size and an inline function to extract the size of the information field itself. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Acked-by: Jesse Barnes Signed-off-by: David S. Miller --- include/linux/pci.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index e30ceea7345b..cfff32fc6e35 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1373,6 +1373,8 @@ void pci_request_acs(void); #define PCI_VPD_LRDT_TAG_SIZE 3 #define PCI_VPD_SRDT_TAG_SIZE 1 +#define PCI_VPD_INFO_FLD_HDR_SIZE 3 + /** * pci_vpd_lrdt_size - Extracts the Large Resource Data Type length * @lrdt: Pointer to the beginning of the Large Resource Data Type tag @@ -1395,6 +1397,17 @@ static inline u8 pci_vpd_srdt_size(const u8 *srdt) return (*srdt) & PCI_VPD_SRDT_LEN_MASK; } +/** + * pci_vpd_info_field_size - Extracts the information field length + * @lrdt: Pointer to the beginning of an information field header + * + * Returns the extracted information field length. + */ +static inline u8 pci_vpd_info_field_size(const u8 *info_field) +{ + return info_field[2]; +} + /** * pci_vpd_find_tag - Locates the Resource Data Type tag provided * @buf: Pointer to buffered vpd data -- cgit v1.2.2 From 4067a8541d397e9d6b443dd2ce0ecb78bfd991db Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Fri, 26 Feb 2010 14:04:43 +0000 Subject: pci: Add helper to search for VPD keywords This patch adds the pci_vpd_find_info_keyword() helper function to find information field keywords within read-only and read-write large resource data type sections. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Acked-by: Jesse Barnes Signed-off-by: David S. Miller --- include/linux/pci.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index cfff32fc6e35..1f4a52131c99 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1375,6 +1375,10 @@ void pci_request_acs(void); #define PCI_VPD_INFO_FLD_HDR_SIZE 3 +#define PCI_VPD_RO_KEYWORD_PARTNO "PN" +#define PCI_VPD_RO_KEYWORD_MFR_ID "MN" +#define PCI_VPD_RO_KEYWORD_VENDOR0 "V0" + /** * pci_vpd_lrdt_size - Extracts the Large Resource Data Type length * @lrdt: Pointer to the beginning of the Large Resource Data Type tag @@ -1420,5 +1424,18 @@ static inline u8 pci_vpd_info_field_size(const u8 *info_field) */ int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt); +/** + * pci_vpd_find_info_keyword - Locates an information field keyword in the VPD + * @buf: Pointer to buffered vpd data + * @off: The offset into the buffer at which to begin the search + * @len: The length of the buffer area, relative to off, in which to search + * @kw: The keyword to search for + * + * Returns the index where the information field keyword was found or + * -ENOENT otherwise. + */ +int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off, + unsigned int len, const char *kw); + #endif /* __KERNEL__ */ #endif /* LINUX_PCI_H */ -- cgit v1.2.2 From f41b177157718abe9a93868bb76e47d4a6f3681d Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Wed, 10 Mar 2010 15:23:30 -0800 Subject: pci-dma: add linux/pci-dma.h to linux/pci.h All the architectures properly set NEED_DMA_MAP_STATE now so we can safely add linux/pci-dma.h to linux/pci.h and remove the linux/pci-dma.h inclusion in arch's asm/pci.h Signed-off-by: FUJITA Tomonori Acked-by: Arnd Bergmann Cc: Jesse Barnes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index cd5809a5963e..7fd5c574efae 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -904,6 +904,7 @@ int pci_set_vga_state(struct pci_dev *pdev, bool decode, unsigned int command_bits, bool change_bridge); /* kmem_cache style wrapper around pci_alloc_consistent() */ +#include #include #define pci_pool dma_pool -- cgit v1.2.2 From 5f3cd1e0bb452c31a306a3e764514ea2eaf7d2e0 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Wed, 10 Mar 2010 15:23:41 -0800 Subject: dma-mapping: pci: move pci_set_dma_mask and pci_set_consistent_dma_mask to pci-dma-compat.h We can use pci-dma-compat.h to implement pci_set_dma_mask and pci_set_consistent_dma_mask as we do with the other PCI DMA API. We can remove HAVE_ARCH_PCI_SET_DMA_MASK too. Signed-off-by: FUJITA Tomonori Cc: Jesse Barnes Cc: Greg KH Cc: Kay Sievers Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/pci.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 7fd5c574efae..a788fa12ff31 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -769,8 +769,6 @@ int pci_try_set_mwi(struct pci_dev *dev); void pci_clear_mwi(struct pci_dev *dev); void pci_intx(struct pci_dev *dev, int enable); void pci_msi_off(struct pci_dev *dev); -int pci_set_dma_mask(struct pci_dev *dev, u64 mask); -int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask); int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size); int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask); int pcix_get_max_mmrbc(struct pci_dev *dev); -- cgit v1.2.2 From dda565492776b7dff5f8507298d868745e734aab Mon Sep 17 00:00:00 2001 From: Yinghai Date: Fri, 9 Apr 2010 01:07:55 +0100 Subject: intel-iommu: use physfn to search drhd for VF When virtfn is used, we should use physfn to find correct drhd -v2: add pci_physfn() Suggested by Roland Dreier do can remove ifdef in dmar.c -v3: Chris pointed out we need that for dma_find_matched_atsr_unit too also change dmar_pci_device_match() static Signed-off-by: Yinghai Lu Acked-by: Roland Dreier Acked-by: Chris Wright Acked-by: Jesse Barnes Signed-off-by: David Woodhouse --- include/linux/pci.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index a788fa12ff31..a327322a33ab 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -334,6 +334,16 @@ struct pci_dev { #endif }; +static inline struct pci_dev *pci_physfn(struct pci_dev *dev) +{ +#ifdef CONFIG_PCI_IOV + if (dev->is_virtfn) + dev = dev->physfn; +#endif + + return dev; +} + extern struct pci_dev *alloc_pci_dev(void); #define pci_dev_b(n) list_entry(n, struct pci_dev, bus_list) -- cgit v1.2.2 From d1fd4fb69eeeb7db0693df58b9116db498d5bfe1 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 10 Jul 2009 18:39:53 -0300 Subject: i7core_edac: Add a code to probe Xeon 55xx bus This code changes the detection procedure of i7core_edac. Instead of directly probing for MC registers, it probes for another register found on Nehalem. If found, it tries to pick the first MC PCI BUS. This should work fine with Xeon 35xx, but, on Xeon 55xx, this is at bus 254 and 255 that are not properly detected by the non-legacy PCI methods. The new detection code scans specifically at buses 254 and 255 for the Xeon 55xx devices. This code has not tested yet. After working, a change at the code will be needed, since the i7core is not yet ready for working with 2 sets of MC. Signed-off-by: Mauro Carvalho Chehab --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index a788fa12ff31..5e2c7e15187d 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -621,6 +621,7 @@ void pci_fixup_cardbus(struct pci_bus *); /* Generic PCI functions used internally */ +void pcibios_scan_specific_bus(int busn); extern struct pci_bus *pci_find_bus(int domain, int busnr); void pci_bus_add_devices(const struct pci_bus *bus); struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus, -- cgit v1.2.2 From affb72c3a8984ba55e055b0a0228c3ea1a056758 Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Tue, 18 May 2010 14:35:16 +0800 Subject: ACPI, APEI, PCIE AER, use general HEST table parsing in AER firmware_first setup Now, a dedicated HEST tabling parsing code is used for PCIE AER firmware_first setup. It is rebased on general HEST tabling parsing code of APEI. The firmware_first setup code is moved from PCI core to AER driver too, because it is only AER related. Signed-off-by: Huang Ying Signed-off-by: Andi Kleen Reviewed-by: Hidetoshi Seto Acked-by: Jesse Barnes Signed-off-by: Len Brown --- include/linux/pci.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index a788fa12ff31..63967e877f20 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -311,7 +311,8 @@ struct pci_dev { unsigned int is_virtfn:1; unsigned int reset_fn:1; unsigned int is_hotplug_bridge:1; - unsigned int aer_firmware_first:1; + unsigned int __aer_firmware_first_valid:1; + unsigned int __aer_firmware_first:1; pci_dev_flags_t dev_flags; atomic_t enable_cnt; /* pci_enable_device has been called */ -- cgit v1.2.2 From 58c84eda07560a6b75b03e8d3b26d6eddfc14011 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 15 Jul 2010 09:41:42 -0600 Subject: PCI: fall back to original BIOS BAR addresses If we fail to assign resources to a PCI BAR, this patch makes us try the original address from BIOS rather than leaving it disabled. Linux tries to make sure all PCI device BARs are inside the upstream PCI host bridge or P2P bridge apertures, reassigning BARs if necessary. Windows does similar reassignment. Before this patch, if we could not move a BAR into an aperture, we left the resource unassigned, i.e., at address zero. Windows leaves such BARs at the original BIOS addresses, and this patch makes Linux do the same. This is a bit ugly because we disable the resource long before we try to reassign it, so we have to keep track of the BIOS BAR address somewhere. For lack of a better place, I put it in the struct pci_dev. I think it would be cleaner to attempt the assignment immediately when the claim fails, so we could easily remember the original address. But we currently claim motherboard resources in the middle, after attempting to claim PCI resources and before assigning new PCI resources, and changing that is a fairly big job. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16263 Reported-by: Andrew Tested-by: Andrew Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 7cb00845f150..f26fda76b87f 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -288,6 +288,7 @@ struct pci_dev { */ unsigned int irq; struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */ + resource_size_t fw_addr[DEVICE_COUNT_RESOURCE]; /* FW-assigned addr */ /* These fields are used by common fixups */ unsigned int transparent:1; /* Transparent PCI bridge */ -- cgit v1.2.2 From 253d2e549818f5a4a52e2db0aba3dacee21e5b38 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Fri, 16 Jul 2010 10:19:22 -0700 Subject: PCI: disable mmio during bar sizing It is a known issue that mmio decoding shall be disabled while doing PCI bar sizing. Host bridge and other devices (PCI PIC) shall be excluded for certain platforms. This patch mainly comes from Mathew Willcox's patch in http://kerneltrap.org/mailarchive/linux-kernel/2007/9/13/258969. A new flag bit "mmio_alway_on" is added to pci_dev with the intention that devices with their mmio decoding cannot be disabled during BAR sizing shall have this bit set, preferrablly in their quirks. Without this patch, Intel Moorestown platform graphics unit will be corrupted during bar sizing activities. Signed-off-by: Jacob Pan Signed-off-by: Jesse Barnes --- include/linux/pci.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index f26fda76b87f..b1d17956a153 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -270,6 +270,8 @@ struct pci_dev { unsigned int d1_support:1; /* Low power state D1 is supported */ unsigned int d2_support:1; /* Low power state D2 is supported */ unsigned int no_d1d2:1; /* Only allow D0 and D3 */ + unsigned int mmio_always_on:1; /* disallow turning off io/mem + decoding during bar sizing */ unsigned int wakeup_prepared:1; unsigned int d3_delay; /* D3->D0 transition time in ms */ -- cgit v1.2.2 From 92298e668372f2f6c8a79fb272f13d65161a4876 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 13 Aug 2010 10:22:17 +1000 Subject: PCI: provide stub pci_domain_nr function for !CONFIG_PCI configs Allows the new PCI domain aware DRM code to compile on m68k. Reported-by: Geert Uytterhoeven Signed-off-by: Dave Airlie Signed-off-by: Jesse Barnes --- include/linux/pci.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index b1d17956a153..c8d95e369ff4 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1214,6 +1214,9 @@ static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus, unsigned int devfn) { return NULL; } +static inline int pci_domain_nr(struct pci_bus *bus) +{ return 0; } + #define dev_is_pci(d) (false) #define dev_is_pf(d) (false) #define dev_num_vf(d) (0) -- cgit v1.2.2