From 2d1c861871d767153538a77c498752b36d4bb4b8 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 9 Dec 2009 17:52:13 +1100 Subject: PCI/cardbus: Add a fixup hook and fix powerpc The cardbus code creates PCI devices without ever going through the necessary fixup bits and pieces that normal PCI devices go through. There's in fact a commented out call to pcibios_fixup_bus() in there, it's commented because ... it doesn't work. I could make pcibios_fixup_bus() do the right thing on powerpc easily but I felt it cleaner instead to provide a specific hook pci_fixup_cardbus for which a weak empty implementation is provided by the PCI core. This fixes cardbus on powerbooks and probably all other PowerPC platforms which was broken completely for ever on some platforms and since 2.6.31 on others such as PowerBooks when we made the DMA ops mandatory (since those are setup by the fixups). Acked-by: Dominik Brodowski Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Jesse Barnes --- include/linux/pci.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index bf1e67080849..5da0690d9cee 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -566,6 +566,9 @@ void pcibios_align_resource(void *, struct resource *, resource_size_t, resource_size_t); void pcibios_update_irq(struct pci_dev *, int irq); +/* Weak but can be overriden by arch */ +void pci_fixup_cardbus(struct pci_bus *); + /* Generic PCI functions used internally */ extern struct pci_bus *pci_find_bus(int domain, int busnr); -- cgit v1.2.2 From 1ae861e652b5457e7fa98ccbc55abea1e207916e Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 31 Dec 2009 12:15:54 +0100 Subject: PCI/PM: Use per-device D3 delays It turns out that some PCI devices require extra delays when changing power state from D3 to D0 (and the other way around). Although this is against the PCI specification, we can handle it quite easily by allowing drivers to define arbitrary D3 delays for devices known to require extra time for switching power states. Introduce additional field d3_delay in struct pci_dev and use it to store the value of the device's D0->D3 delay, in miliseconds. Make the PCI PM core code use the per-device d3_delay unless pci_pm_d3_delay is greater (in which case the latter is used). [This also allows the driver to specify d3_delay shorter than the 10 ms required by the PCI standard if the device is known to be able to handle that.] Make the sky2 driver set d3_delay to 150 for devices handled by it. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=14730 which is a listed regression from 2.6.30. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 5da0690d9cee..174e5392e51e 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -243,6 +243,7 @@ struct pci_dev { unsigned int d2_support:1; /* Low power state D2 is supported */ unsigned int no_d1d2:1; /* Only allow D0 and D3 */ unsigned int wakeup_prepared:1; + unsigned int d3_delay; /* D3->D0 transition time in ms */ #ifdef CONFIG_PCIEASPM struct pcie_link_state *link_state; /* ASPM link state. */ -- cgit v1.2.2 From bb209c8287d2d55ec4a67e3933346e0a3ee0da76 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 26 Jan 2010 17:10:03 +0000 Subject: powerpc/pci: Add calls to set_pcie_port_type() and set_pcie_hotplug_bridge() We are missing these when building the pci_dev from scratch off the Open Firmware device-tree Signed-off-by: Benjamin Herrenschmidt Acked-by: Jesse Barnes --- include/linux/pci.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 174e5392e51e..c1968f464c38 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -756,6 +756,10 @@ pci_power_t pci_target_state(struct pci_dev *dev); int pci_prepare_to_sleep(struct pci_dev *dev); int pci_back_from_sleep(struct pci_dev *dev); +/* For use by arch with custom probe code */ +void set_pcie_port_type(struct pci_dev *pdev); +void set_pcie_hotplug_bridge(struct pci_dev *pdev); + /* Functions for PCI Hotplug drivers to use */ int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap); #ifdef CONFIG_HOTPLUG -- cgit v1.2.2