From 00cfa730db0d8378685148e6365b9cec7384b275 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 30 Jan 2011 12:31:30 -0800 Subject: Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown Tested-by: Julien Boibessot Signed-off-by: Dmitry Torokhov --- include/linux/mfd/wm831x/pdata.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h index fd322aca33ba..173086d42af4 100644 --- a/include/linux/mfd/wm831x/pdata.h +++ b/include/linux/mfd/wm831x/pdata.h @@ -80,7 +80,8 @@ struct wm831x_touch_pdata { int isel; /** Current for pen down (uA) */ int rpu; /** Pen down sensitivity resistor divider */ int pressure; /** Report pressure (boolean) */ - int data_irq; /** Touch data ready IRQ */ + unsigned int data_irq; /** Touch data ready IRQ */ + unsigned int pd_irq; /** Touch pendown detect IRQ */ }; enum wm831x_watchdog_action { -- cgit v1.2.2 From 94fd5b7401e330498331ea3667d796e74c63d08a Mon Sep 17 00:00:00 2001 From: Matti Aaltonen Date: Tue, 1 Mar 2011 10:10:35 -0300 Subject: [media] MFD: WL1273 FM Radio: MFD driver for the FM radio This is the core of the WL1273 FM radio driver, it connects the two child modules. The two child drivers are drivers/media/radio/radio-wl1273.c and sound/soc/codecs/wl1273.c. The radio-wl1273 driver implements the V4L2 interface and communicates with the device. The ALSA codec offers digital audio, without it only analog audio is available. Signed-off-by: Matti J. Aaltonen Acked-by: Samuel Ortiz Signed-off-by: Mauro Carvalho Chehab --- include/linux/mfd/wl1273-core.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/wl1273-core.h b/include/linux/mfd/wl1273-core.h index 9787293eae5f..db2f3f454a1b 100644 --- a/include/linux/mfd/wl1273-core.h +++ b/include/linux/mfd/wl1273-core.h @@ -280,7 +280,9 @@ struct wl1273_core { struct i2c_client *client; + int (*read)(struct wl1273_core *core, u8, u16 *); int (*write)(struct wl1273_core *core, u8, u16); + int (*write_data)(struct wl1273_core *core, u8 *, u16); int (*set_audio)(struct wl1273_core *core, unsigned int); int (*set_volume)(struct wl1273_core *core, unsigned int); }; -- cgit v1.2.2 From b103e0b3c52e6edb4839ccc961cf335ca6b88918 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 21 Jan 2011 13:26:46 +0000 Subject: mfd: Support configuration of WM831x /IRQ output in CMOS mode Provide platform data allowing the system to set the /IRQ pin into CMOS mode rather than the default open drain. The default value of this platform data reflects the default hardware configuration so there should be no change to existing users. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm831x/pdata.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h index 173086d42af4..ac3aa73943e7 100644 --- a/include/linux/mfd/wm831x/pdata.h +++ b/include/linux/mfd/wm831x/pdata.h @@ -109,6 +109,9 @@ struct wm831x_pdata { /** Called after subdevices are set up */ int (*post_init)(struct wm831x *wm831x); + /** Put the /IRQ line into CMOS mode */ + bool irq_cmos; + int irq_base; int gpio_base; struct wm831x_backlight_pdata *backlight; -- cgit v1.2.2 From 90550d1903da8dac851d220b794e44c90a11c6ce Mon Sep 17 00:00:00 2001 From: Mattias Nilsson Date: Mon, 14 Feb 2011 11:17:12 +0100 Subject: mfd: AB8500 system control driver This adds a pretty straight-forward system control driver for the AB8500. This driver will be used from the core platform, e.g the clock tree implementation in the machine code, and is by nature singleton. There are a few simple functions to read, write, set and clear registers so that the machine code can control its own foundation. Cc: Mattias Wallin Signed-off-by: Mattias Nilsson Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- include/linux/mfd/ab8500/sysctrl.h | 254 +++++++++++++++++++++++++++++++++++++ 1 file changed, 254 insertions(+) create mode 100644 include/linux/mfd/ab8500/sysctrl.h (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/ab8500/sysctrl.h b/include/linux/mfd/ab8500/sysctrl.h new file mode 100644 index 000000000000..10da0291f8f8 --- /dev/null +++ b/include/linux/mfd/ab8500/sysctrl.h @@ -0,0 +1,254 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Mattias Nilsson for ST Ericsson. + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef __AB8500_SYSCTRL_H +#define __AB8500_SYSCTRL_H + +#include + +#ifdef CONFIG_AB8500_CORE + +int ab8500_sysctrl_read(u16 reg, u8 *value); +int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value); + +#else + +static inline int ab8500_sysctrl_read(u16 reg, u8 *value) +{ + return 0; +} + +static inline int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value) +{ + return 0; +} + +#endif /* CONFIG_AB8500_CORE */ + +static inline int ab8500_sysctrl_set(u16 reg, u8 bits) +{ + return ab8500_sysctrl_write(reg, bits, bits); +} + +static inline int ab8500_sysctrl_clear(u16 reg, u8 bits) +{ + return ab8500_sysctrl_write(reg, bits, 0); +} + +/* Registers */ +#define AB8500_TURNONSTATUS 0x100 +#define AB8500_RESETSTATUS 0x101 +#define AB8500_PONKEY1PRESSSTATUS 0x102 +#define AB8500_SYSCLKREQSTATUS 0x142 +#define AB8500_STW4500CTRL1 0x180 +#define AB8500_STW4500CTRL2 0x181 +#define AB8500_STW4500CTRL3 0x200 +#define AB8500_MAINWDOGCTRL 0x201 +#define AB8500_MAINWDOGTIMER 0x202 +#define AB8500_LOWBAT 0x203 +#define AB8500_BATTOK 0x204 +#define AB8500_SYSCLKTIMER 0x205 +#define AB8500_SMPSCLKCTRL 0x206 +#define AB8500_SMPSCLKSEL1 0x207 +#define AB8500_SMPSCLKSEL2 0x208 +#define AB8500_SMPSCLKSEL3 0x209 +#define AB8500_SYSULPCLKCONF 0x20A +#define AB8500_SYSULPCLKCTRL1 0x20B +#define AB8500_SYSCLKCTRL 0x20C +#define AB8500_SYSCLKREQ1VALID 0x20D +#define AB8500_SYSTEMCTRLSUP 0x20F +#define AB8500_SYSCLKREQ1RFCLKBUF 0x210 +#define AB8500_SYSCLKREQ2RFCLKBUF 0x211 +#define AB8500_SYSCLKREQ3RFCLKBUF 0x212 +#define AB8500_SYSCLKREQ4RFCLKBUF 0x213 +#define AB8500_SYSCLKREQ5RFCLKBUF 0x214 +#define AB8500_SYSCLKREQ6RFCLKBUF 0x215 +#define AB8500_SYSCLKREQ7RFCLKBUF 0x216 +#define AB8500_SYSCLKREQ8RFCLKBUF 0x217 +#define AB8500_DITHERCLKCTRL 0x220 +#define AB8500_SWATCTRL 0x230 +#define AB8500_HIQCLKCTRL 0x232 +#define AB8500_VSIMSYSCLKCTRL 0x233 + +/* Bits */ +#define AB8500_TURNONSTATUS_PORNVBAT BIT(0) +#define AB8500_TURNONSTATUS_PONKEY1DBF BIT(1) +#define AB8500_TURNONSTATUS_PONKEY2DBF BIT(2) +#define AB8500_TURNONSTATUS_RTCALARM BIT(3) +#define AB8500_TURNONSTATUS_MAINCHDET BIT(4) +#define AB8500_TURNONSTATUS_VBUSDET BIT(5) +#define AB8500_TURNONSTATUS_USBIDDETECT BIT(6) + +#define AB8500_RESETSTATUS_RESETN4500NSTATUS BIT(0) +#define AB8500_RESETSTATUS_SWRESETN4500NSTATUS BIT(2) + +#define AB8500_PONKEY1PRESSSTATUS_PONKEY1PRESSTIME_MASK 0x7F +#define AB8500_PONKEY1PRESSSTATUS_PONKEY1PRESSTIME_SHIFT 0 + +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ1STATUS BIT(0) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ2STATUS BIT(1) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ3STATUS BIT(2) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ4STATUS BIT(3) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ5STATUS BIT(4) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ6STATUS BIT(5) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ7STATUS BIT(6) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ8STATUS BIT(7) + +#define AB8500_STW4500CTRL1_SWOFF BIT(0) +#define AB8500_STW4500CTRL1_SWRESET4500N BIT(1) +#define AB8500_STW4500CTRL1_THDB8500SWOFF BIT(2) + +#define AB8500_STW4500CTRL2_RESETNVAUX1VALID BIT(0) +#define AB8500_STW4500CTRL2_RESETNVAUX2VALID BIT(1) +#define AB8500_STW4500CTRL2_RESETNVAUX3VALID BIT(2) +#define AB8500_STW4500CTRL2_RESETNVMODVALID BIT(3) +#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY1VALID BIT(4) +#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY2VALID BIT(5) +#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY3VALID BIT(6) +#define AB8500_STW4500CTRL2_RESETNVSMPS1VALID BIT(7) + +#define AB8500_STW4500CTRL3_CLK32KOUT2DIS BIT(0) +#define AB8500_STW4500CTRL3_RESETAUDN BIT(1) +#define AB8500_STW4500CTRL3_RESETDENCN BIT(2) +#define AB8500_STW4500CTRL3_THSDENA BIT(3) + +#define AB8500_MAINWDOGCTRL_MAINWDOGENA BIT(0) +#define AB8500_MAINWDOGCTRL_MAINWDOGKICK BIT(1) +#define AB8500_MAINWDOGCTRL_WDEXPTURNONVALID BIT(4) + +#define AB8500_MAINWDOGTIMER_MAINWDOGTIMER_MASK 0x7F +#define AB8500_MAINWDOGTIMER_MAINWDOGTIMER_SHIFT 0 + +#define AB8500_LOWBAT_LOWBATENA BIT(0) +#define AB8500_LOWBAT_LOWBAT_MASK 0x7E +#define AB8500_LOWBAT_LOWBAT_SHIFT 1 + +#define AB8500_BATTOK_BATTOKSEL0THF_MASK 0x0F +#define AB8500_BATTOK_BATTOKSEL0THF_SHIFT 0 +#define AB8500_BATTOK_BATTOKSEL1THF_MASK 0xF0 +#define AB8500_BATTOK_BATTOKSEL1THF_SHIFT 4 + +#define AB8500_SYSCLKTIMER_SYSCLKTIMER_MASK 0x0F +#define AB8500_SYSCLKTIMER_SYSCLKTIMER_SHIFT 0 +#define AB8500_SYSCLKTIMER_SYSCLKTIMERADJ_MASK 0xF0 +#define AB8500_SYSCLKTIMER_SYSCLKTIMERADJ_SHIFT 4 + +#define AB8500_SMPSCLKCTRL_SMPSCLKINTSEL_MASK 0x03 +#define AB8500_SMPSCLKCTRL_SMPSCLKINTSEL_SHIFT 0 +#define AB8500_SMPSCLKCTRL_3M2CLKINTENA BIT(2) + +#define AB8500_SMPSCLKSEL1_VARMCLKSEL_MASK 0x07 +#define AB8500_SMPSCLKSEL1_VARMCLKSEL_SHIFT 0 +#define AB8500_SMPSCLKSEL1_VAPECLKSEL_MASK 0x38 +#define AB8500_SMPSCLKSEL1_VAPECLKSEL_SHIFT 3 + +#define AB8500_SMPSCLKSEL2_VMODCLKSEL_MASK 0x07 +#define AB8500_SMPSCLKSEL2_VMODCLKSEL_SHIFT 0 +#define AB8500_SMPSCLKSEL2_VSMPS1CLKSEL_MASK 0x38 +#define AB8500_SMPSCLKSEL2_VSMPS1CLKSEL_SHIFT 3 + +#define AB8500_SMPSCLKSEL3_VSMPS2CLKSEL_MASK 0x07 +#define AB8500_SMPSCLKSEL3_VSMPS2CLKSEL_SHIFT 0 +#define AB8500_SMPSCLKSEL3_VSMPS3CLKSEL_MASK 0x38 +#define AB8500_SMPSCLKSEL3_VSMPS3CLKSEL_SHIFT 3 + +#define AB8500_SYSULPCLKCONF_ULPCLKCONF_MASK 0x03 +#define AB8500_SYSULPCLKCONF_ULPCLKCONF_SHIFT 0 +#define AB8500_SYSULPCLKCONF_CLK27MHZSTRE BIT(2) +#define AB8500_SYSULPCLKCONF_TVOUTCLKDELN BIT(3) +#define AB8500_SYSULPCLKCONF_TVOUTCLKINV BIT(4) +#define AB8500_SYSULPCLKCONF_ULPCLKSTRE BIT(5) +#define AB8500_SYSULPCLKCONF_CLK27MHZBUFENA BIT(6) +#define AB8500_SYSULPCLKCONF_CLK27MHZPDENA BIT(7) + +#define AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_MASK 0x03 +#define AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_SHIFT 0 +#define AB8500_SYSULPCLKCTRL1_ULPCLKREQ BIT(2) +#define AB8500_SYSULPCLKCTRL1_4500SYSCLKREQ BIT(3) +#define AB8500_SYSULPCLKCTRL1_AUDIOCLKENA BIT(4) +#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF2REQ BIT(5) +#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF3REQ BIT(6) +#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF4REQ BIT(7) + +#define AB8500_SYSCLKCTRL_TVOUTPLLENA BIT(0) +#define AB8500_SYSCLKCTRL_TVOUTCLKENA BIT(1) +#define AB8500_SYSCLKCTRL_USBCLKENA BIT(2) + +#define AB8500_SYSCLKREQ1VALID_SYSCLKREQ1VALID BIT(0) +#define AB8500_SYSCLKREQ1VALID_ULPCLKREQ1VALID BIT(1) +#define AB8500_SYSCLKREQ1VALID_USBSYSCLKREQ1VALID BIT(2) + +#define AB8500_SYSTEMCTRLSUP_EXTSUP12LPNCLKSEL_MASK 0x03 +#define AB8500_SYSTEMCTRLSUP_EXTSUP12LPNCLKSEL_SHIFT 0 +#define AB8500_SYSTEMCTRLSUP_EXTSUP3LPNCLKSEL_MASK 0x0C +#define AB8500_SYSTEMCTRLSUP_EXTSUP3LPNCLKSEL_SHIFT 2 +#define AB8500_SYSTEMCTRLSUP_INTDB8500NOD BIT(4) + +#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF4 BIT(4) + +#define AB8500_DITHERCLKCTRL_VARMDITHERENA BIT(0) +#define AB8500_DITHERCLKCTRL_VSMPS3DITHERENA BIT(1) +#define AB8500_DITHERCLKCTRL_VSMPS1DITHERENA BIT(2) +#define AB8500_DITHERCLKCTRL_VSMPS2DITHERENA BIT(3) +#define AB8500_DITHERCLKCTRL_VMODDITHERENA BIT(4) +#define AB8500_DITHERCLKCTRL_VAPEDITHERENA BIT(5) +#define AB8500_DITHERCLKCTRL_DITHERDEL_MASK 0xC0 +#define AB8500_DITHERCLKCTRL_DITHERDEL_SHIFT 6 + +#define AB8500_SWATCTRL_UPDATERF BIT(0) +#define AB8500_SWATCTRL_SWATENABLE BIT(1) +#define AB8500_SWATCTRL_RFOFFTIMER_MASK 0x1C +#define AB8500_SWATCTRL_RFOFFTIMER_SHIFT 2 +#define AB8500_SWATCTRL_SWATBIT5 BIT(6) + +#define AB8500_HIQCLKCTRL_SYSCLKREQ1HIQENAVALID BIT(0) +#define AB8500_HIQCLKCTRL_SYSCLKREQ2HIQENAVALID BIT(1) +#define AB8500_HIQCLKCTRL_SYSCLKREQ3HIQENAVALID BIT(2) +#define AB8500_HIQCLKCTRL_SYSCLKREQ4HIQENAVALID BIT(3) +#define AB8500_HIQCLKCTRL_SYSCLKREQ5HIQENAVALID BIT(4) +#define AB8500_HIQCLKCTRL_SYSCLKREQ6HIQENAVALID BIT(5) +#define AB8500_HIQCLKCTRL_SYSCLKREQ7HIQENAVALID BIT(6) +#define AB8500_HIQCLKCTRL_SYSCLKREQ8HIQENAVALID BIT(7) + +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ1VALID BIT(0) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ2VALID BIT(1) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ3VALID BIT(2) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ4VALID BIT(3) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ5VALID BIT(4) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ6VALID BIT(5) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ7VALID BIT(6) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ8VALID BIT(7) + +#endif /* __AB8500_SYSCTRL_H */ -- cgit v1.2.2 From dae2db30c114cd0dec59b4130c315c9cce351741 Mon Sep 17 00:00:00 2001 From: Arun Murthy Date: Tue, 22 Feb 2011 10:11:13 +0100 Subject: mfd: Add new ab8500 GPADC driver AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage Signed-off-by: Arun Murthy Acked-by: Linus Walleij Acked-by: Mattias Wallin Signed-off-by: Samuel Ortiz --- include/linux/mfd/ab8500-gpadc.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 include/linux/mfd/ab8500-gpadc.h (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/ab8500-gpadc.h b/include/linux/mfd/ab8500-gpadc.h new file mode 100644 index 000000000000..9f6cc26bc734 --- /dev/null +++ b/include/linux/mfd/ab8500-gpadc.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2010 ST-Ericsson SA + * Licensed under GPLv2. + * + * Author: Arun R Murthy + */ + +#ifndef _AB8500_GPADC_H +#define _AB8500_GPADC_H + +/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2) */ +#define BAT_CTRL 0x01 +#define BTEMP_BALL 0x02 +#define MAIN_CHARGER_V 0x03 +#define ACC_DETECT1 0x04 +#define ACC_DETECT2 0x05 +#define ADC_AUX1 0x06 +#define ADC_AUX2 0x07 +#define MAIN_BAT_V 0x08 +#define VBUS_V 0x09 +#define MAIN_CHARGER_C 0x0A +#define USB_CHARGER_C 0x0B +#define BK_BAT_V 0x0C +#define DIE_TEMP 0x0D + +int ab8500_gpadc_convert(u8 input); + +#endif /* _AB8500_GPADC_H */ -- cgit v1.2.2 From 2798e226ad7db82725ba03da933638e981b472f7 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Thu, 17 Feb 2011 19:07:08 -0800 Subject: mfd-core: Fix up typos/vagueness in comment Signed-off-by: Andres Salomon Signed-off-by: Samuel Ortiz --- include/linux/mfd/core.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index 835996e167e1..1fd7c4467e5a 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -39,8 +39,8 @@ struct mfd_cell { size_t data_size; /* - * This resources can be specified relatively to the parent device. - * For accessing device you should use resources from device + * These resources can be specified relative to the parent device. + * For accessing hardware you should use resources from the platform dev */ int num_resources; const struct resource *resources; -- cgit v1.2.2 From fe891a008f3310be47786e87c158edebdb71e265 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Thu, 17 Feb 2011 19:07:09 -0800 Subject: mfd-core: Unconditionally add mfd_cell to every platform_device Previously, one would set the mfd_cell's platform_data/data_size to point to the current mfd_cell in order to pass that information along to drivers. This causes the current mfd_cell to always be available to drivers. It also adds a wrapper function for fetching the mfd cell from a platform device, similar to what originally existed for mfd devices. Drivers who previously used platform_data for other purposes can still use it; the difference is that mfd_get_data() must be used to access it (and the pdata structure is no longer allocated in mfd_add_devices). Note that mfd_get_data is intentionally vague (in name) about where the data is stored; variable name changes can come later without having to touch brazillions of drivers. Signed-off-by: Andres Salomon Signed-off-by: Samuel Ortiz --- include/linux/mfd/core.h | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index 1fd7c4467e5a..aefc378f8dc9 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -33,9 +33,10 @@ struct mfd_cell { /* driver-specific data for MFD-aware "cell" drivers */ void *driver_data; - /* platform_data can be used to either pass data to "generic" - driver or as a hook to mfd_cell for the "cell" drivers */ + /* platform_data can be used to pass data to "generic" drivers */ void *platform_data; + + /* unused */ size_t data_size; /* @@ -55,6 +56,24 @@ struct mfd_cell { bool pm_runtime_no_callbacks; }; +/* + * Given a platform device that's been created by mfd_add_devices(), fetch + * the mfd_cell that created it. + */ +static inline const struct mfd_cell *mfd_get_cell(struct platform_device *pdev) +{ + return pdev->dev.platform_data; +} + +/* + * Given a platform device that's been created by mfd_add_devices(), fetch + * the .platform_data entry from the mfd_cell that created it. + */ +static inline void *mfd_get_data(struct platform_device *pdev) +{ + return mfd_get_cell(pdev)->platform_data; +} + extern int mfd_add_devices(struct device *parent, int id, const struct mfd_cell *cells, int n_devs, struct resource *mem_base, -- cgit v1.2.2 From 0ce5fabe59d7c4f51b5ad51ed178ba92531ec04d Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Thu, 17 Feb 2011 19:07:11 -0800 Subject: mfd: mfd_cell is now implicitly available to ab3550 driver No clients (in mainline kernel, I'm told that drivers exist in external trees that are planned for mainline inclusion) make use of this, nor do they make use of platform_data, so nothing really had to change here. The .data_size field is unused, so its usage gets removed. Signed-off-by: Andres Salomon Signed-off-by: Samuel Ortiz --- include/linux/mfd/abx500.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index 67bd6f7ecf32..7d9b6ae1c203 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -186,7 +186,6 @@ struct abx500_init_settings { struct ab3550_platform_data { struct {unsigned int base; unsigned int count; } irq; void *dev_data[AB3550_NUM_DEVICES]; - size_t dev_data_sz[AB3550_NUM_DEVICES]; struct abx500_init_settings *init_settings; unsigned int init_settings_sz; }; -- cgit v1.2.2 From 4ec1b54c4d082d4bad19b55ca709da7e7138d542 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Thu, 17 Feb 2011 19:07:23 -0800 Subject: mfd: mfd_cell is now implicitly available to mc13xxx drivers The cell's platform_data is now accessed with a helper function; change clients to use that, and remove the now-unused data_size. Note that mfd-core no longer makes a copy of platform_data, but the mc13xxx-core driver creates the pdata structures on the stack. In order to get around that, the various ARM mach types that set the pdata have been changed to hold the variable in static (global) memory. Also note that __initdata references in aforementioned pdata structs have been dropped. Signed-off-by: Andres Salomon Signed-off-by: Samuel Ortiz --- include/linux/mfd/mc13xxx.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h index a1d391b40e68..c064beaaccb7 100644 --- a/include/linux/mfd/mc13xxx.h +++ b/include/linux/mfd/mc13xxx.h @@ -146,8 +146,7 @@ struct mc13xxx_platform_data { #define MC13XXX_USE_LED (1 << 5) unsigned int flags; - int num_regulators; - struct mc13xxx_regulator_init_data *regulators; + struct mc13xxx_regulator_platform_data regulators; struct mc13xxx_leds_platform_data *leds; }; -- cgit v1.2.2 From 40e03f571b2e63827f2afb90ea9aa459612c29e3 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Thu, 17 Feb 2011 19:07:24 -0800 Subject: mfd: Drop data_size from mfd_cell struct Now that there are no more users of this, drop it. Signed-off-by: Andres Salomon Signed-off-by: Samuel Ortiz --- include/linux/mfd/core.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index aefc378f8dc9..923ec2591eb7 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -36,9 +36,6 @@ struct mfd_cell { /* platform_data can be used to pass data to "generic" drivers */ void *platform_data; - /* unused */ - size_t data_size; - /* * These resources can be specified relative to the parent device. * For accessing hardware you should use resources from the platform dev -- cgit v1.2.2 From 65e523595a31813c0f20ffd249792c60e253438e Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Thu, 17 Feb 2011 19:07:25 -0800 Subject: mfd: Rename platform_data field of mfd_cell to mfd_data Rename the platform_data variable to imply a distinction between common platform_data driver usage (typically accessed via pdev->dev.platform_data) and the way MFD passes data down to clients (using a wrapper named mfd_get_data). All clients have already been changed to use the wrapper function, so this can be a quick single-commit change that only touches things in drivers/mfd. Signed-off-by: Andres Salomon Acked-by: Linus Walleij Signed-off-by: Samuel Ortiz --- include/linux/mfd/core.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index 923ec2591eb7..f317fe4f8366 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -33,8 +33,8 @@ struct mfd_cell { /* driver-specific data for MFD-aware "cell" drivers */ void *driver_data; - /* platform_data can be used to pass data to "generic" drivers */ - void *platform_data; + /* mfd_data can be used to pass data to client drivers */ + void *mfd_data; /* * These resources can be specified relative to the parent device. @@ -64,11 +64,11 @@ static inline const struct mfd_cell *mfd_get_cell(struct platform_device *pdev) /* * Given a platform device that's been created by mfd_add_devices(), fetch - * the .platform_data entry from the mfd_cell that created it. + * the .mfd_data entry from the mfd_cell that created it. */ static inline void *mfd_get_data(struct platform_device *pdev) { - return mfd_get_cell(pdev)->platform_data; + return mfd_get_cell(pdev)->mfd_data; } extern int mfd_add_devices(struct device *parent, int id, -- cgit v1.2.2 From dcb50e83bb86d66d3554ba9c365488669c84d037 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Thu, 17 Feb 2011 19:07:33 -0800 Subject: mfd: Remove driver_data field from mfd_cell All users of this have now been switched over to using mfd_data; it can go away now. Signed-off-by: Andres Salomon Signed-off-by: Samuel Ortiz --- include/linux/mfd/core.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index f317fe4f8366..71cd1f983cce 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -30,9 +30,6 @@ struct mfd_cell { int (*suspend)(struct platform_device *dev); int (*resume)(struct platform_device *dev); - /* driver-specific data for MFD-aware "cell" drivers */ - void *driver_data; - /* mfd_data can be used to pass data to client drivers */ void *mfd_data; -- cgit v1.2.2 From 1e29af62f2b285bd18685da93c3ce8c33ca2d1db Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Thu, 17 Feb 2011 19:07:34 -0800 Subject: mfd: Add refcounting support to mfd_cells This provides convenience functions for sharing of cells across multiple mfd clients. Mfd drivers can provide enable/disable hooks to actually tweak the hardware, and clients can call mfd_shared_cell_{en,dis}able without having to worry about whether or not another client happens to have enabled or disabled the cell/hardware. Note that this is purely optional; drivers can continue to use the mfd_cell's enable/disable hooks for their own purposes, if desired. Signed-off-by: Andres Salomon Signed-off-by: Samuel Ortiz --- include/linux/mfd/core.h | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index 71cd1f983cce..22a2f5ebd9db 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -25,8 +25,11 @@ struct mfd_cell { const char *name; int id; + /* refcounting for multiple drivers to use a single cell */ + atomic_t *usage_count; int (*enable)(struct platform_device *dev); int (*disable)(struct platform_device *dev); + int (*suspend)(struct platform_device *dev); int (*resume)(struct platform_device *dev); @@ -50,6 +53,15 @@ struct mfd_cell { bool pm_runtime_no_callbacks; }; +/* + * Convenience functions for clients using shared cells. Refcounting + * happens automatically, with the cell's enable/disable callbacks + * being called only when a device is first being enabled or no other + * clients are making use of it. + */ +extern int mfd_shared_cell_enable(struct platform_device *pdev); +extern int mfd_shared_cell_disable(struct platform_device *pdev); + /* * Given a platform device that's been created by mfd_add_devices(), fetch * the mfd_cell that created it. @@ -69,7 +81,7 @@ static inline void *mfd_get_data(struct platform_device *pdev) } extern int mfd_add_devices(struct device *parent, int id, - const struct mfd_cell *cells, int n_devs, + struct mfd_cell *cells, int n_devs, struct resource *mem_base, int irq_base); -- cgit v1.2.2 From a9bbba996302344b1fac7773cf8198f6fee35ac1 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Thu, 17 Feb 2011 19:07:35 -0800 Subject: mfd: add platform_device sharing support for mfd This adds functions to enable platform_device sharing for mfd clients. Each platform driver (mfd client) that wants to share an mfd_cell's platform_device uses the mfd_shared_platform_driver_{un,}register() functions instead of platform_driver_{un,}register(). Along with registering the platform driver, these also register a new platform device with the same characteristics as the original cell, but a different name. Given an mfd_cell with the name "foo", drivers that want to share access to its resources can call mfd_shared_platform_driver_register with platform drivers named (for example) "bar" and "baz". This will register two platform devices and drivers named "bar" and "baz" that share the same cell as the platform device "foo". The drivers can then call "foo" cell's enable hooks (or mfd_shared_cell_enable) to enable resources, and obtain platform resources as they normally would. This deals with platform handling only; mfd driver-specific details, hardware handling, refcounting, etc are all dealt with separately. Signed-off-by: Andres Salomon Signed-off-by: Samuel Ortiz --- include/linux/mfd/core.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index 22a2f5ebd9db..ed9970412cc2 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -87,4 +87,13 @@ extern int mfd_add_devices(struct device *parent, int id, extern void mfd_remove_devices(struct device *parent); +/* + * For MFD drivers with clients sharing access to resources, these create + * multiple platform devices per cell. Contention handling must still be + * handled via drivers (ie, with enable/disable hooks). + */ +extern int mfd_shared_platform_driver_register(struct platform_driver *drv, + const char *cellname); +extern void mfd_shared_platform_driver_unregister(struct platform_driver *drv); + #endif -- cgit v1.2.2 From 93619c2106e2c968a260ebffb75ddc5efa567c16 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 1 Mar 2011 20:12:46 +0000 Subject: mfd: Add platform data to support multiple WM831x devices per board If a system contains multiple WM831x devices we need to pass a device number through to the MFD so that we use unique device IDs when we instantiate child devices. In order to get support for this into 2.6.39 add some platform data to support the configuration, but no implementation as yet. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm831x/pdata.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h index ac3aa73943e7..afe4db49402d 100644 --- a/include/linux/mfd/wm831x/pdata.h +++ b/include/linux/mfd/wm831x/pdata.h @@ -104,6 +104,9 @@ struct wm831x_watchdog_pdata { #define WM831X_MAX_ISINK 2 struct wm831x_pdata { + /** Used to distinguish multiple WM831x chips */ + int wm831x_num; + /** Called before subdevices are set up */ int (*pre_init)(struct wm831x *wm831x); /** Called after subdevices are set up */ -- cgit v1.2.2 From adceed6263887e04721b477e6504aa24789f827d Mon Sep 17 00:00:00 2001 From: Mattias Wallin Date: Wed, 2 Mar 2011 11:51:11 +0100 Subject: mfd: ab8500 chip revision 3.0 support This patch adds support for ab8500 chip revision cut 3.0. Also rephrased from Changes to Author in the header. Signed-off-by: Mattias Wallin Acked-by: Linus Walleij Signed-off-by: Samuel Ortiz --- include/linux/mfd/ab8500.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h index 37f56b7c4c15..56f8dea72152 100644 --- a/include/linux/mfd/ab8500.h +++ b/include/linux/mfd/ab8500.h @@ -111,8 +111,8 @@ * @dev: parent device * @lock: read/write operations lock * @irq_lock: genirq bus lock - * @revision: chip revision * @irq: irq line + * @chip_id: chip revision id * @write: register write * @read: register read * @rx_buf: rx buf for SPI @@ -124,7 +124,7 @@ struct ab8500 { struct device *dev; struct mutex lock; struct mutex irq_lock; - int revision; + int irq_base; int irq; u8 chip_id; -- cgit v1.2.2 From f77289ac25b0c81acbed6f9c17cb14809a04e18b Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Thu, 3 Mar 2011 09:51:58 -0800 Subject: mfd: Rename mfd_shared_cell_{en,dis}able to drop the "shared" part As requested by Samuel, there's not really any reason to have "shared" in the name. This also modifies the only user of the function, as well. Signed-off-by: Andres Salomon Signed-off-by: Samuel Ortiz --- include/linux/mfd/core.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index ed9970412cc2..1408bf8eed5f 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -59,8 +59,8 @@ struct mfd_cell { * being called only when a device is first being enabled or no other * clients are making use of it. */ -extern int mfd_shared_cell_enable(struct platform_device *pdev); -extern int mfd_shared_cell_disable(struct platform_device *pdev); +extern int mfd_cell_enable(struct platform_device *pdev); +extern int mfd_cell_disable(struct platform_device *pdev); /* * Given a platform device that's been created by mfd_add_devices(), fetch -- cgit v1.2.2 From 527e7e9a82ec95cdb8f694855004b3d262efd09f Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Fri, 4 Mar 2011 15:50:26 +0900 Subject: mfd: MAX8997/8966 support MAX8997/MAX8966 chip is a multi-function device with I2C bussses. The chip includes PMIC, RTC, Fuel Gauge, MUIC, Haptic, Flash control, and Battery (charging) control. This patch is an initial release of a MAX8997/8966 driver that supports to enable the chip with its primary I2C bus that connects every device mentioned above except for Fuel Gauge, which uses another I2C bus. The fuel gauge is not supported by this mfd driver and is supported by a seperated driver of MAX17042 Fuel Gauge (yes, the fuel gauge part is compatible with MAX17042). Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Reviewed-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/max8997-private.h | 347 ++++++++++++++++++++++++++++++++++++ include/linux/mfd/max8997.h | 88 +++++++++ 2 files changed, 435 insertions(+) create mode 100644 include/linux/mfd/max8997-private.h create mode 100644 include/linux/mfd/max8997.h (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h new file mode 100644 index 000000000000..93a9477e075f --- /dev/null +++ b/include/linux/mfd/max8997-private.h @@ -0,0 +1,347 @@ +/* + * max8997.h - Voltage regulator driver for the Maxim 8997 + * + * Copyright (C) 2010 Samsung Electrnoics + * MyungJoo Ham + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_MFD_MAX8997_PRIV_H +#define __LINUX_MFD_MAX8997_PRIV_H + +#include + +enum max8997_pmic_reg { + MAX8997_REG_PMIC_ID0 = 0x00, + MAX8997_REG_PMIC_ID1 = 0x01, + MAX8997_REG_INTSRC = 0x02, + MAX8997_REG_INT1 = 0x03, + MAX8997_REG_INT2 = 0x04, + MAX8997_REG_INT3 = 0x05, + MAX8997_REG_INT4 = 0x06, + + MAX8997_REG_INT1MSK = 0x08, + MAX8997_REG_INT2MSK = 0x09, + MAX8997_REG_INT3MSK = 0x0a, + MAX8997_REG_INT4MSK = 0x0b, + + MAX8997_REG_STATUS1 = 0x0d, + MAX8997_REG_STATUS2 = 0x0e, + MAX8997_REG_STATUS3 = 0x0f, + MAX8997_REG_STATUS4 = 0x10, + + MAX8997_REG_MAINCON1 = 0x13, + MAX8997_REG_MAINCON2 = 0x14, + MAX8997_REG_BUCKRAMP = 0x15, + + MAX8997_REG_BUCK1CTRL = 0x18, + MAX8997_REG_BUCK1DVS1 = 0x19, + MAX8997_REG_BUCK1DVS2 = 0x1a, + MAX8997_REG_BUCK1DVS3 = 0x1b, + MAX8997_REG_BUCK1DVS4 = 0x1c, + MAX8997_REG_BUCK1DVS5 = 0x1d, + MAX8997_REG_BUCK1DVS6 = 0x1e, + MAX8997_REG_BUCK1DVS7 = 0x1f, + MAX8997_REG_BUCK1DVS8 = 0x20, + MAX8997_REG_BUCK2CTRL = 0x21, + MAX8997_REG_BUCK2DVS1 = 0x22, + MAX8997_REG_BUCK2DVS2 = 0x23, + MAX8997_REG_BUCK2DVS3 = 0x24, + MAX8997_REG_BUCK2DVS4 = 0x25, + MAX8997_REG_BUCK2DVS5 = 0x26, + MAX8997_REG_BUCK2DVS6 = 0x27, + MAX8997_REG_BUCK2DVS7 = 0x28, + MAX8997_REG_BUCK2DVS8 = 0x29, + MAX8997_REG_BUCK3CTRL = 0x2a, + MAX8997_REG_BUCK3DVS = 0x2b, + MAX8997_REG_BUCK4CTRL = 0x2c, + MAX8997_REG_BUCK4DVS = 0x2d, + MAX8997_REG_BUCK5CTRL = 0x2e, + MAX8997_REG_BUCK5DVS1 = 0x2f, + MAX8997_REG_BUCK5DVS2 = 0x30, + MAX8997_REG_BUCK5DVS3 = 0x31, + MAX8997_REG_BUCK5DVS4 = 0x32, + MAX8997_REG_BUCK5DVS5 = 0x33, + MAX8997_REG_BUCK5DVS6 = 0x34, + MAX8997_REG_BUCK5DVS7 = 0x35, + MAX8997_REG_BUCK5DVS8 = 0x36, + MAX8997_REG_BUCK6CTRL = 0x37, + MAX8997_REG_BUCK6BPSKIPCTRL = 0x38, + MAX8997_REG_BUCK7CTRL = 0x39, + MAX8997_REG_BUCK7DVS = 0x3a, + MAX8997_REG_LDO1CTRL = 0x3b, + MAX8997_REG_LDO2CTRL = 0x3c, + MAX8997_REG_LDO3CTRL = 0x3d, + MAX8997_REG_LDO4CTRL = 0x3e, + MAX8997_REG_LDO5CTRL = 0x3f, + MAX8997_REG_LDO6CTRL = 0x40, + MAX8997_REG_LDO7CTRL = 0x41, + MAX8997_REG_LDO8CTRL = 0x42, + MAX8997_REG_LDO9CTRL = 0x43, + MAX8997_REG_LDO10CTRL = 0x44, + MAX8997_REG_LDO11CTRL = 0x45, + MAX8997_REG_LDO12CTRL = 0x46, + MAX8997_REG_LDO13CTRL = 0x47, + MAX8997_REG_LDO14CTRL = 0x48, + MAX8997_REG_LDO15CTRL = 0x49, + MAX8997_REG_LDO16CTRL = 0x4a, + MAX8997_REG_LDO17CTRL = 0x4b, + MAX8997_REG_LDO18CTRL = 0x4c, + MAX8997_REG_LDO21CTRL = 0x4d, + + MAX8997_REG_MBCCTRL1 = 0x50, + MAX8997_REG_MBCCTRL2 = 0x51, + MAX8997_REG_MBCCTRL3 = 0x52, + MAX8997_REG_MBCCTRL4 = 0x53, + MAX8997_REG_MBCCTRL5 = 0x54, + MAX8997_REG_MBCCTRL6 = 0x55, + MAX8997_REG_OTPCGHCVS = 0x56, + + MAX8997_REG_SAFEOUTCTRL = 0x5a, + + MAX8997_REG_LBCNFG1 = 0x5e, + MAX8997_REG_LBCNFG2 = 0x5f, + MAX8997_REG_BBCCTRL = 0x60, + + MAX8997_REG_FLASH1_CUR = 0x63, /* 0x63 ~ 0x6e for FLASH */ + MAX8997_REG_FLASH2_CUR = 0x64, + MAX8997_REG_MOVIE_CUR = 0x65, + MAX8997_REG_GSMB_CUR = 0x66, + MAX8997_REG_BOOST_CNTL = 0x67, + MAX8997_REG_LEN_CNTL = 0x68, + MAX8997_REG_FLASH_CNTL = 0x69, + MAX8997_REG_WDT_CNTL = 0x6a, + MAX8997_REG_MAXFLASH1 = 0x6b, + MAX8997_REG_MAXFLASH2 = 0x6c, + MAX8997_REG_FLASHSTATUS = 0x6d, + MAX8997_REG_FLASHSTATUSMASK = 0x6e, + + MAX8997_REG_GPIOCNTL1 = 0x70, + MAX8997_REG_GPIOCNTL2 = 0x71, + MAX8997_REG_GPIOCNTL3 = 0x72, + MAX8997_REG_GPIOCNTL4 = 0x73, + MAX8997_REG_GPIOCNTL5 = 0x74, + MAX8997_REG_GPIOCNTL6 = 0x75, + MAX8997_REG_GPIOCNTL7 = 0x76, + MAX8997_REG_GPIOCNTL8 = 0x77, + MAX8997_REG_GPIOCNTL9 = 0x78, + MAX8997_REG_GPIOCNTL10 = 0x79, + MAX8997_REG_GPIOCNTL11 = 0x7a, + MAX8997_REG_GPIOCNTL12 = 0x7b, + + MAX8997_REG_LDO1CONFIG = 0x80, + MAX8997_REG_LDO2CONFIG = 0x81, + MAX8997_REG_LDO3CONFIG = 0x82, + MAX8997_REG_LDO4CONFIG = 0x83, + MAX8997_REG_LDO5CONFIG = 0x84, + MAX8997_REG_LDO6CONFIG = 0x85, + MAX8997_REG_LDO7CONFIG = 0x86, + MAX8997_REG_LDO8CONFIG = 0x87, + MAX8997_REG_LDO9CONFIG = 0x88, + MAX8997_REG_LDO10CONFIG = 0x89, + MAX8997_REG_LDO11CONFIG = 0x8a, + MAX8997_REG_LDO12CONFIG = 0x8b, + MAX8997_REG_LDO13CONFIG = 0x8c, + MAX8997_REG_LDO14CONFIG = 0x8d, + MAX8997_REG_LDO15CONFIG = 0x8e, + MAX8997_REG_LDO16CONFIG = 0x8f, + MAX8997_REG_LDO17CONFIG = 0x90, + MAX8997_REG_LDO18CONFIG = 0x91, + MAX8997_REG_LDO21CONFIG = 0x92, + + MAX8997_REG_DVSOKTIMER1 = 0x97, + MAX8997_REG_DVSOKTIMER2 = 0x98, + MAX8997_REG_DVSOKTIMER4 = 0x99, + MAX8997_REG_DVSOKTIMER5 = 0x9a, + + MAX8997_REG_PMIC_END = 0x9b, +}; + +enum max8997_muic_reg { + MAX8997_MUIC_REG_ID = 0x0, + MAX8997_MUIC_REG_INT1 = 0x1, + MAX8997_MUIC_REG_INT2 = 0x2, + MAX8997_MUIC_REG_INT3 = 0x3, + MAX8997_MUIC_REG_STATUS1 = 0x4, + MAX8997_MUIC_REG_STATUS2 = 0x5, + MAX8997_MUIC_REG_STATUS3 = 0x6, + MAX8997_MUIC_REG_INTMASK1 = 0x7, + MAX8997_MUIC_REG_INTMASK2 = 0x8, + MAX8997_MUIC_REG_INTMASK3 = 0x9, + MAX8997_MUIC_REG_CDETCTRL = 0xa, + + MAX8997_MUIC_REG_CONTROL1 = 0xc, + MAX8997_MUIC_REG_CONTROL2 = 0xd, + MAX8997_MUIC_REG_CONTROL3 = 0xe, + + MAX8997_MUIC_REG_END = 0xf, +}; + +enum max8997_haptic_reg { + MAX8997_HAPTIC_REG_GENERAL = 0x00, + MAX8997_HAPTIC_REG_CONF1 = 0x01, + MAX8997_HAPTIC_REG_CONF2 = 0x02, + MAX8997_HAPTIC_REG_DRVCONF = 0x03, + MAX8997_HAPTIC_REG_CYCLECONF1 = 0x04, + MAX8997_HAPTIC_REG_CYCLECONF2 = 0x05, + MAX8997_HAPTIC_REG_SIGCONF1 = 0x06, + MAX8997_HAPTIC_REG_SIGCONF2 = 0x07, + MAX8997_HAPTIC_REG_SIGCONF3 = 0x08, + MAX8997_HAPTIC_REG_SIGCONF4 = 0x09, + MAX8997_HAPTIC_REG_SIGDC1 = 0x0a, + MAX8997_HAPTIC_REG_SIGDC2 = 0x0b, + MAX8997_HAPTIC_REG_SIGPWMDC1 = 0x0c, + MAX8997_HAPTIC_REG_SIGPWMDC2 = 0x0d, + MAX8997_HAPTIC_REG_SIGPWMDC3 = 0x0e, + MAX8997_HAPTIC_REG_SIGPWMDC4 = 0x0f, + MAX8997_HAPTIC_REG_MTR_REV = 0x10, + + MAX8997_HAPTIC_REG_END = 0x11, +}; + +/* slave addr = 0x0c: using "2nd part" of rev4 datasheet */ +enum max8997_rtc_reg { + MAX8997_RTC_CTRLMASK = 0x02, + MAX8997_RTC_CTRL = 0x03, + MAX8997_RTC_UPDATE1 = 0x04, + MAX8997_RTC_UPDATE2 = 0x05, + MAX8997_RTC_WTSR_SMPL = 0x06, + + MAX8997_RTC_SEC = 0x10, + MAX8997_RTC_MIN = 0x11, + MAX8997_RTC_HOUR = 0x12, + MAX8997_RTC_DAY_OF_WEEK = 0x13, + MAX8997_RTC_MONTH = 0x14, + MAX8997_RTC_YEAR = 0x15, + MAX8997_RTC_DAY_OF_MONTH = 0x16, + MAX8997_RTC_ALARM1_SEC = 0x17, + MAX8997_RTC_ALARM1_MIN = 0x18, + MAX8997_RTC_ALARM1_HOUR = 0x19, + MAX8997_RTC_ALARM1_DAY_OF_WEEK = 0x1a, + MAX8997_RTC_ALARM1_MONTH = 0x1b, + MAX8997_RTC_ALARM1_YEAR = 0x1c, + MAX8997_RTC_ALARM1_DAY_OF_MONTH = 0x1d, + MAX8997_RTC_ALARM2_SEC = 0x1e, + MAX8997_RTC_ALARM2_MIN = 0x1f, + MAX8997_RTC_ALARM2_HOUR = 0x20, + MAX8997_RTC_ALARM2_DAY_OF_WEEK = 0x21, + MAX8997_RTC_ALARM2_MONTH = 0x22, + MAX8997_RTC_ALARM2_YEAR = 0x23, + MAX8997_RTC_ALARM2_DAY_OF_MONTH = 0x24, +}; + +enum max8997_irq_source { + PMIC_INT1 = 0, + PMIC_INT2, + PMIC_INT3, + PMIC_INT4, + + FUEL_GAUGE, /* Ignored (MAX17042 driver handles) */ + + MUIC_INT1, + MUIC_INT2, + MUIC_INT3, + + GPIO_LOW, /* Not implemented */ + GPIO_HI, /* Not implemented */ + + FLASH_STATUS, /* Not implemented */ + + MAX8997_IRQ_GROUP_NR, +}; + +enum max8997_irq { + MAX8997_PMICIRQ_PWRONR, + MAX8997_PMICIRQ_PWRONF, + MAX8997_PMICIRQ_PWRON1SEC, + MAX8997_PMICIRQ_JIGONR, + MAX8997_PMICIRQ_JIGONF, + MAX8997_PMICIRQ_LOWBAT2, + MAX8997_PMICIRQ_LOWBAT1, + + MAX8997_PMICIRQ_JIGR, + MAX8997_PMICIRQ_JIGF, + MAX8997_PMICIRQ_MR, + MAX8997_PMICIRQ_DVS1OK, + MAX8997_PMICIRQ_DVS2OK, + MAX8997_PMICIRQ_DVS3OK, + MAX8997_PMICIRQ_DVS4OK, + + MAX8997_PMICIRQ_CHGINS, + MAX8997_PMICIRQ_CHGRM, + MAX8997_PMICIRQ_DCINOVP, + MAX8997_PMICIRQ_TOPOFFR, + MAX8997_PMICIRQ_CHGRSTF, + MAX8997_PMICIRQ_MBCHGTMEXPD, + + MAX8997_PMICIRQ_RTC60S, + MAX8997_PMICIRQ_RTCA1, + MAX8997_PMICIRQ_RTCA2, + MAX8997_PMICIRQ_SMPL_INT, + MAX8997_PMICIRQ_RTC1S, + MAX8997_PMICIRQ_WTSR, + + MAX8997_MUICIRQ_ADCError, + MAX8997_MUICIRQ_ADCLow, + MAX8997_MUICIRQ_ADC, + + MAX8997_MUICIRQ_VBVolt, + MAX8997_MUICIRQ_DBChg, + MAX8997_MUICIRQ_DCDTmr, + MAX8997_MUICIRQ_ChgDetRun, + MAX8997_MUICIRQ_ChgTyp, + + MAX8997_MUICIRQ_OVP, + + MAX8997_IRQ_NR, +}; + +#define MAX8997_REG_BUCK1DVS(x) (MAX8997_REG_BUCK1DVS1 + (x) - 1) +#define MAX8997_REG_BUCK2DVS(x) (MAX8997_REG_BUCK2DVS1 + (x) - 1) +#define MAX8997_REG_BUCK5DVS(x) (MAX8997_REG_BUCK5DVS1 + (x) - 1) + +struct max8997_dev { + struct device *dev; + struct i2c_client *i2c; /* 0xcc / PMIC, Battery Control, and FLASH */ + struct i2c_client *rtc; /* slave addr 0x0c */ + struct i2c_client *haptic; /* slave addr 0x90 */ + struct i2c_client *muic; /* slave addr 0x4a */ + struct mutex iolock; + + int type; + struct platform_device *battery; /* battery control (not fuel gauge) */ + + bool wakeup; + + /* For hibernation */ + u8 reg_dump[MAX8997_REG_PMIC_END + MAX8997_MUIC_REG_END + + MAX8997_HAPTIC_REG_END]; +}; + +enum max8997_types { + TYPE_MAX8997, + TYPE_MAX8966, +}; + +extern int max8997_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest); +extern int max8997_bulk_read(struct i2c_client *i2c, u8 reg, int count, + u8 *buf); +extern int max8997_write_reg(struct i2c_client *i2c, u8 reg, u8 value); +extern int max8997_bulk_write(struct i2c_client *i2c, u8 reg, int count, + u8 *buf); +extern int max8997_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask); + +#endif /* __LINUX_MFD_MAX8997_PRIV_H */ diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h new file mode 100644 index 000000000000..d0d9136c104b --- /dev/null +++ b/include/linux/mfd/max8997.h @@ -0,0 +1,88 @@ +/* + * max8997.h - Driver for the Maxim 8997/8966 + * + * Copyright (C) 2009-2010 Samsung Electrnoics + * MyungJoo Ham + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This driver is based on max8998.h + * + * MAX8997 has PMIC, MUIC, HAPTIC, RTC, FLASH, and Fuel Gauge devices. + * Except Fuel Gauge, every device shares the same I2C bus and included in + * this mfd driver. Although the fuel gauge is included in the chip, it is + * excluded from the driver because a) it has a different I2C bus from + * others and b) it can be enabled simply by using MAX17042 driver. + */ + +#ifndef __LINUX_MFD_MAX8998_H +#define __LINUX_MFD_MAX8998_H + +#include + +/* MAX8997/8966 regulator IDs */ +enum max8998_regulators { + MAX8997_LDO1 = 0, + MAX8997_LDO2, + MAX8997_LDO3, + MAX8997_LDO4, + MAX8997_LDO5, + MAX8997_LDO6, + MAX8997_LDO7, + MAX8997_LDO8, + MAX8997_LDO9, + MAX8997_LDO10, + MAX8997_LDO11, + MAX8997_LDO12, + MAX8997_LDO13, + MAX8997_LDO14, + MAX8997_LDO15, + MAX8997_LDO16, + MAX8997_LDO17, + MAX8997_LDO18, + MAX8997_LDO21, + MAX8997_BUCK1, + MAX8997_BUCK2, + MAX8997_BUCK3, + MAX8997_BUCK4, + MAX8997_BUCK5, + MAX8997_BUCK6, + MAX8997_BUCK7, + MAX8997_EN32KHZ_AP, + MAX8997_EN32KHZ_CP, + MAX8997_ENVICHG, + MAX8997_ESAFEOUT1, + MAX8997_ESAFEOUT2, + MAX8997_CHARGER_CV, /* control MBCCV of MBCCTRL3 */ + MAX8997_CHARGER, /* charger current, MBCCTRL4 */ + MAX8997_CHARGER_TOPOFF, /* MBCCTRL5 */ +}; + +struct max8997_regulator_data { + int id; + struct regulator_init_data *initdata; +}; + +struct max8997_platform_data { + bool wakeup; + /* PMIC: Not implemented */ + /* MUIC: Not implemented */ + /* HAPTIC: Not implemented */ + /* RTC: Not implemented */ + /* Flash: Not implemented */ + /* Charger control: Not implemented */ +}; + +#endif /* __LINUX_MFD_MAX8998_H */ -- cgit v1.2.2 From cf16943947cef089c564d2be0ae9d96a285f495e Mon Sep 17 00:00:00 2001 From: Daniel Willerud Date: Sat, 5 Mar 2011 11:46:01 +0100 Subject: mfd: Move ab8500 gpadc header to subdir This moves the ab8500-gpadc.h header down into the ab8500/ subdir in include/linux/mfd and fixes some whitespace in the header in the process. Signed-off-by: Daniel Willerud Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- include/linux/mfd/ab8500-gpadc.h | 28 ---------------------------- include/linux/mfd/ab8500/ab8500-gpadc.h | 28 ++++++++++++++++++++++++++++ 2 files changed, 28 insertions(+), 28 deletions(-) delete mode 100644 include/linux/mfd/ab8500-gpadc.h create mode 100644 include/linux/mfd/ab8500/ab8500-gpadc.h (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/ab8500-gpadc.h b/include/linux/mfd/ab8500-gpadc.h deleted file mode 100644 index 9f6cc26bc734..000000000000 --- a/include/linux/mfd/ab8500-gpadc.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) 2010 ST-Ericsson SA - * Licensed under GPLv2. - * - * Author: Arun R Murthy - */ - -#ifndef _AB8500_GPADC_H -#define _AB8500_GPADC_H - -/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2) */ -#define BAT_CTRL 0x01 -#define BTEMP_BALL 0x02 -#define MAIN_CHARGER_V 0x03 -#define ACC_DETECT1 0x04 -#define ACC_DETECT2 0x05 -#define ADC_AUX1 0x06 -#define ADC_AUX2 0x07 -#define MAIN_BAT_V 0x08 -#define VBUS_V 0x09 -#define MAIN_CHARGER_C 0x0A -#define USB_CHARGER_C 0x0B -#define BK_BAT_V 0x0C -#define DIE_TEMP 0x0D - -int ab8500_gpadc_convert(u8 input); - -#endif /* _AB8500_GPADC_H */ diff --git a/include/linux/mfd/ab8500/ab8500-gpadc.h b/include/linux/mfd/ab8500/ab8500-gpadc.h new file mode 100644 index 000000000000..74b87dde9cd0 --- /dev/null +++ b/include/linux/mfd/ab8500/ab8500-gpadc.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2010 ST-Ericsson SA + * Licensed under GPLv2. + * + * Author: Arun R Murthy + */ + +#ifndef _AB8500_GPADC_H +#define _AB8500_GPADC_H + +/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2) */ +#define BAT_CTRL 0x01 +#define BTEMP_BALL 0x02 +#define MAIN_CHARGER_V 0x03 +#define ACC_DETECT1 0x04 +#define ACC_DETECT2 0x05 +#define ADC_AUX1 0x06 +#define ADC_AUX2 0x07 +#define MAIN_BAT_V 0x08 +#define VBUS_V 0x09 +#define MAIN_CHARGER_C 0x0A +#define USB_CHARGER_C 0x0B +#define BK_BAT_V 0x0C +#define DIE_TEMP 0x0D + +int ab8500_gpadc_convert(u8 input); + +#endif /* _AB8500_GPADC_H */ -- cgit v1.2.2 From 6321992cd3c56bab6cc52e3384951e12616805a1 Mon Sep 17 00:00:00 2001 From: Daniel Willerud Date: Sat, 5 Mar 2011 11:46:13 +0100 Subject: mfd: Reentrance and revamp ab8500 gpadc fetching interface This revamps the interface so that AB8500 GPADCs are fetched by name. Probed GPADCs are added to a list and this list is searched for a matching GPADC. This makes it possible to have multiple AB8500 GPADC instances instead of it being a singleton, and rids the need to keep a GPADC pointer around in the core AB8500 MFD struct. Currently the match is made to the device name which is by default numbered from the device instance such as "ab8500-gpadc.0" but by using the .init_name field of the device a more intiutive naming for the GPADC blocks can be achieved if desired. Signed-off-by: Daniel Willerud Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- include/linux/mfd/ab8500/ab8500-gpadc.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/ab8500/ab8500-gpadc.h b/include/linux/mfd/ab8500/ab8500-gpadc.h index 74b87dde9cd0..46b954011f16 100644 --- a/include/linux/mfd/ab8500/ab8500-gpadc.h +++ b/include/linux/mfd/ab8500/ab8500-gpadc.h @@ -3,6 +3,7 @@ * Licensed under GPLv2. * * Author: Arun R Murthy + * Author: Daniel Willerud */ #ifndef _AB8500_GPADC_H @@ -23,6 +24,9 @@ #define BK_BAT_V 0x0C #define DIE_TEMP 0x0D -int ab8500_gpadc_convert(u8 input); +struct ab8500_gpadc; + +struct ab8500_gpadc *ab8500_gpadc_get(char *name); +int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 input); #endif /* _AB8500_GPADC_H */ -- cgit v1.2.2 From adb70483f4d560323db9aaca5f066fde4d96f339 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Mon, 7 Mar 2011 23:43:09 +0800 Subject: mfd: Adopt mfd_data in 88pm860x backlight Copy 88pm860x platform data into different mfd_data structure for backlight driver. So move the identification of device node from backlight driver to mfd driver. Signed-off-by: Haojian Zhuang Signed-off-by: Samuel Ortiz --- include/linux/mfd/88pm860x.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h index 4db1fbd8969e..f790d3766228 100644 --- a/include/linux/mfd/88pm860x.h +++ b/include/linux/mfd/88pm860x.h @@ -356,10 +356,10 @@ struct pm860x_platform_data { int i2c_port; /* Controlled by GI2C or PI2C */ int irq_mode; /* Clear interrupt by read/write(0/1) */ int irq_base; /* IRQ base number of 88pm860x */ + int num_backlights; struct regulator_init_data *regulator[PM8607_MAX_REGULATOR]; }; -extern char pm860x_backlight_name[][MFD_NAME_SIZE]; extern char pm860x_led_name[][MFD_NAME_SIZE]; extern int pm860x_reg_read(struct i2c_client *, int); -- cgit v1.2.2 From 3154c344696e58b7e15317cd624816dbe3832ad1 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Mon, 7 Mar 2011 23:43:10 +0800 Subject: mfd: Adopt mfd_data in 88pm860x led Copy 88pm860x platform data into different mfd_data structure for led driver. So move the identification of device node from led driver to mfd driver. Signed-off-by: Haojian Zhuang Signed-off-by: Samuel Ortiz --- include/linux/mfd/88pm860x.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h index f790d3766228..ff606140f4b4 100644 --- a/include/linux/mfd/88pm860x.h +++ b/include/linux/mfd/88pm860x.h @@ -356,12 +356,11 @@ struct pm860x_platform_data { int i2c_port; /* Controlled by GI2C or PI2C */ int irq_mode; /* Clear interrupt by read/write(0/1) */ int irq_base; /* IRQ base number of 88pm860x */ + int num_leds; int num_backlights; struct regulator_init_data *regulator[PM8607_MAX_REGULATOR]; }; -extern char pm860x_led_name[][MFD_NAME_SIZE]; - extern int pm860x_reg_read(struct i2c_client *, int); extern int pm860x_reg_write(struct i2c_client *, int, unsigned char); extern int pm860x_bulk_read(struct i2c_client *, int, int, unsigned char *); -- cgit v1.2.2 From 22aad0011e4728a29bf3775b6f5e2f9677abd8c0 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Mon, 7 Mar 2011 23:43:11 +0800 Subject: mfd: Adopt mfd_data in 88pm860x regulator Copy 88pm860x platform data into different mfd_data structure for regulator driver. So move the identification of device node from regulator driver to mfd driver. Signed-off-by: Haojian Zhuang Acked-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/88pm860x.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h index ff606140f4b4..a6f6f81efece 100644 --- a/include/linux/mfd/88pm860x.h +++ b/include/linux/mfd/88pm860x.h @@ -131,9 +131,11 @@ enum { PM8607_ID_LDO8, PM8607_ID_LDO9, PM8607_ID_LDO10, + PM8607_ID_LDO11, PM8607_ID_LDO12, PM8607_ID_LDO13, PM8607_ID_LDO14, + PM8607_ID_LDO15, PM8607_ID_RG_MAX, }; @@ -310,8 +312,6 @@ struct pm860x_chip { }; -#define PM8607_MAX_REGULATOR PM8607_ID_RG_MAX /* 3 Bucks, 13 LDOs */ - enum { GI2C_PORT = 0, PI2C_PORT, @@ -351,6 +351,7 @@ struct pm860x_platform_data { struct pm860x_led_pdata *led; struct pm860x_touch_pdata *touch; struct pm860x_power_pdata *power; + struct regulator_init_data *regulator; unsigned short companion_addr; /* I2C address of companion chip */ int i2c_port; /* Controlled by GI2C or PI2C */ @@ -358,7 +359,7 @@ struct pm860x_platform_data { int irq_base; /* IRQ base number of 88pm860x */ int num_leds; int num_backlights; - struct regulator_init_data *regulator[PM8607_MAX_REGULATOR]; + int num_regulators; }; extern int pm860x_reg_read(struct i2c_client *, int); -- cgit v1.2.2 From 09b034191acd1f95a749630fe366a84d3029930c Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Mon, 7 Mar 2011 23:43:16 +0800 Subject: mfd: Append additional read write on 88pm860x Append the additional read/write operation on 88pm860x for accessing test page in 88PM860x. Signed-off-by: Haojian Zhuang Signed-off-by: Samuel Ortiz --- include/linux/mfd/88pm860x.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h index a6f6f81efece..8fba7972ff5f 100644 --- a/include/linux/mfd/88pm860x.h +++ b/include/linux/mfd/88pm860x.h @@ -368,6 +368,14 @@ extern int pm860x_bulk_read(struct i2c_client *, int, int, unsigned char *); extern int pm860x_bulk_write(struct i2c_client *, int, int, unsigned char *); extern int pm860x_set_bits(struct i2c_client *, int, unsigned char, unsigned char); +extern int pm860x_page_reg_read(struct i2c_client *, int); +extern int pm860x_page_reg_write(struct i2c_client *, int, unsigned char); +extern int pm860x_page_bulk_read(struct i2c_client *, int, int, + unsigned char *); +extern int pm860x_page_bulk_write(struct i2c_client *, int, int, + unsigned char *); +extern int pm860x_page_set_bits(struct i2c_client *, int, unsigned char, + unsigned char); extern int pm860x_device_init(struct pm860x_chip *chip, struct pm860x_platform_data *pdata) __devinit ; -- cgit v1.2.2 From e93c53870c6d77c40de8981da238af947d6aa084 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 10 Mar 2011 13:54:07 +0000 Subject: mfd: Add WM8994 bulk register write operation Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm8994/core.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/wm8994/core.h b/include/linux/mfd/wm8994/core.h index ef4f0b6083a3..cb7d3ae7da8f 100644 --- a/include/linux/mfd/wm8994/core.h +++ b/include/linux/mfd/wm8994/core.h @@ -88,6 +88,8 @@ int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg, unsigned short mask, unsigned short val); int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg, int count, u16 *buf); +int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg, + int count, u16 *buf); /* Helper to save on boilerplate */ -- cgit v1.2.2 From bd6ca2cf50fbe3cc63513d026343035c3bd2e352 Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Fri, 11 Mar 2011 11:34:44 +0900 Subject: regulator: MAX8997/8966 support This patch supports PMIC/Regulator part of MAX8997/MAX8966 MFD. In this initial release, selecting voltages or current-limit and switching on/off the regulators are supported. Controlling voltages for DVS with GPIOs is not implemented fully and requires more considerations: it controls multiple bucks (selection of 1, 2, and 5) at the same time with SET1~3 gpios. Thus, when DVS-GPIO is activated, we lose the ability to control the voltage of a single buck regulator independently; i.e., contolling a buck affects other two bucks. Therefore, using the conventional regulator framework directly might be problematic. However, in this driver, we try to choose a setting without such side effect of affecting other regulators and then try to choose a setting with the minimum side effect (the sum of voltage changes in other regulators). On the other hand, controlling all the three bucks simultenously based on the voltage set table may help build cpufreq and similar system more robust; i.e., all the three voltages are consistent every time without glitches during transition. Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Acked-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/max8997.h | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index d0d9136c104b..cb671b3451bf 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -68,6 +68,8 @@ enum max8998_regulators { MAX8997_CHARGER_CV, /* control MBCCV of MBCCTRL3 */ MAX8997_CHARGER, /* charger current, MBCCTRL4 */ MAX8997_CHARGER_TOPOFF, /* MBCCTRL5 */ + + MAX8997_REG_MAX, }; struct max8997_regulator_data { @@ -77,7 +79,31 @@ struct max8997_regulator_data { struct max8997_platform_data { bool wakeup; - /* PMIC: Not implemented */ + /* IRQ: Not implemented */ + /* ---- PMIC ---- */ + struct max8997_regulator_data *regulators; + int num_regulators; + + /* + * SET1~3 DVS GPIOs control Buck1, 2, and 5 simultaneously. Therefore, + * With buckx_gpiodvs enabled, the buckx cannot be controlled + * independently. To control buckx (of 1, 2, and 5) independently, + * disable buckx_gpiodvs and control with BUCKxDVS1 register. + * + * When buckx_gpiodvs and bucky_gpiodvs are both enabled, set_voltage + * on buckx will change the voltage of bucky at the same time. + * + */ + bool ignore_gpiodvs_side_effect; + int buck125_gpios[3]; /* GPIO of [0]SET1, [1]SET2, [2]SET3 */ + int buck125_default_idx; /* Default value of SET1, 2, 3 */ + unsigned int buck1_voltage[8]; /* buckx_voltage in uV */ + bool buck1_gpiodvs; + unsigned int buck2_voltage[8]; + bool buck2_gpiodvs; + unsigned int buck5_voltage[8]; + bool buck5_gpiodvs; + /* MUIC: Not implemented */ /* HAPTIC: Not implemented */ /* RTC: Not implemented */ -- cgit v1.2.2 From 798a8eee44da56b4f2e000ff81dfb49d09c65b71 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 9 Mar 2011 13:02:38 +0100 Subject: mfd: Add a core driver for TI TPS61050/TPS61052 chips v2 The TPS61050/TPS61052 are boost converters, LED drivers, LED flash drivers and a simple GPIO pin chips. Cc: Liam Girdwood Cc: Mark Brown Cc: Jonas Aberg Cc: Ola Lilja Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- include/linux/mfd/tps6105x.h | 95 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 95 insertions(+) create mode 100644 include/linux/mfd/tps6105x.h (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/tps6105x.h b/include/linux/mfd/tps6105x.h new file mode 100644 index 000000000000..f259244a56bd --- /dev/null +++ b/include/linux/mfd/tps6105x.h @@ -0,0 +1,95 @@ +/* + * Copyright (C) 2011 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * + * Author: Linus Walleij + * + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef MFD_TPS6105X_H +#define MFD_TPS6105X_H + +#include + +/* + * Register definitions to all subdrivers + */ +#define TPS6105X_REG_0 0x00 +#define TPS6105X_REG0_MODE_SHIFT 6 +#define TPS6105X_REG0_MODE_MASK (0x03<<6) +/* These defines for both reg0 and reg1 */ +#define TPS6105X_REG0_MODE_SHUTDOWN 0x00 +#define TPS6105X_REG0_MODE_TORCH 0x01 +#define TPS6105X_REG0_MODE_TORCH_FLASH 0x02 +#define TPS6105X_REG0_MODE_VOLTAGE 0x03 +#define TPS6105X_REG0_VOLTAGE_SHIFT 4 +#define TPS6105X_REG0_VOLTAGE_MASK (3<<4) +#define TPS6105X_REG0_VOLTAGE_450 0 +#define TPS6105X_REG0_VOLTAGE_500 1 +#define TPS6105X_REG0_VOLTAGE_525 2 +#define TPS6105X_REG0_VOLTAGE_500_2 3 +#define TPS6105X_REG0_DIMMING_SHIFT 3 +#define TPS6105X_REG0_TORCHC_SHIFT 0 +#define TPS6105X_REG0_TORCHC_MASK (7<<0) +#define TPS6105X_REG0_TORCHC_0 0x00 +#define TPS6105X_REG0_TORCHC_50 0x01 +#define TPS6105X_REG0_TORCHC_75 0x02 +#define TPS6105X_REG0_TORCHC_100 0x03 +#define TPS6105X_REG0_TORCHC_150 0x04 +#define TPS6105X_REG0_TORCHC_200 0x05 +#define TPS6105X_REG0_TORCHC_250_400 0x06 +#define TPS6105X_REG0_TORCHC_250_500 0x07 +#define TPS6105X_REG_1 0x01 +#define TPS6105X_REG1_MODE_SHIFT 6 +#define TPS6105X_REG1_MODE_MASK (0x03<<6) +#define TPS6105X_REG1_MODE_SHUTDOWN 0x00 +#define TPS6105X_REG1_MODE_TORCH 0x01 +#define TPS6105X_REG1_MODE_TORCH_FLASH 0x02 +#define TPS6105X_REG1_MODE_VOLTAGE 0x03 +#define TPS6105X_REG_2 0x02 +#define TPS6105X_REG_3 0x03 + +/** + * enum tps6105x_mode - desired mode for the TPS6105x + * @TPS6105X_MODE_SHUTDOWN: this instance is inactive, not used for anything + * @TPS61905X_MODE_TORCH: this instance is used as a LED, usually a while + * LED, for example as backlight or flashlight. If this is set, the + * TPS6105X will register to the LED framework + * @TPS6105X_MODE_TORCH_FLASH: this instance is used as a flashgun, usually + * in a camera + * @TPS6105X_MODE_VOLTAGE: this instance is used as a voltage regulator and + * will register to the regulator framework + */ +enum tps6105x_mode { + TPS6105X_MODE_SHUTDOWN, + TPS6105X_MODE_TORCH, + TPS6105X_MODE_TORCH_FLASH, + TPS6105X_MODE_VOLTAGE, +}; + +/** + * struct tps6105x_platform_data - TPS61905x platform data + * @mode: what mode this instance shall be operated in, + * this is not selectable at runtime + */ +struct tps6105x_platform_data { + enum tps6105x_mode mode; +}; + +/** + * struct tps6105x - state holder for the TPS6105x drivers + * @mutex: mutex to serialize I2C accesses + * @i2c_client: corresponding I2C client + */ +struct tps6105x { + struct tps6105x_platform_data *pdata; + struct mutex lock; + struct i2c_client *client; +}; + +extern int tps6105x_set(struct tps6105x *tps6105x, u8 reg, u8 value); +extern int tps6105x_get(struct tps6105x *tps6105x, u8 reg, u8 *buf); +extern int tps6105x_mask_and_set(struct tps6105x *tps6105x, u8 reg, + u8 bitmask, u8 bitvalues); + +#endif -- cgit v1.2.2 From 2edd3b692404efc2d3915175a2ed553e783de763 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 9 Mar 2011 12:02:55 +0000 Subject: regulator: Add a subdriver for TI TPS6105x regulator portions v2 This adds a subdriver for the regulator found inside the TPS61050 and TPS61052 chips. Cc: Samuel Ortiz Cc: Ola Lilja Cc: Jonas Aberg Signed-off-by: Linus Walleij Acked-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/tps6105x.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/tps6105x.h b/include/linux/mfd/tps6105x.h index f259244a56bd..386743dd931c 100644 --- a/include/linux/mfd/tps6105x.h +++ b/include/linux/mfd/tps6105x.h @@ -10,6 +10,7 @@ #define MFD_TPS6105X_H #include +#include /* * Register definitions to all subdrivers @@ -71,20 +72,25 @@ enum tps6105x_mode { * struct tps6105x_platform_data - TPS61905x platform data * @mode: what mode this instance shall be operated in, * this is not selectable at runtime + * @regulator_data: initialization data for the voltage + * regulator if used as a voltage source */ struct tps6105x_platform_data { enum tps6105x_mode mode; + struct regulator_init_data *regulator_data; }; /** * struct tps6105x - state holder for the TPS6105x drivers * @mutex: mutex to serialize I2C accesses * @i2c_client: corresponding I2C client + * @regulator: regulator device if used in voltage mode */ struct tps6105x { struct tps6105x_platform_data *pdata; struct mutex lock; struct i2c_client *client; + struct regulator_dev *regulator; }; extern int tps6105x_set(struct tps6105x *tps6105x, u8 reg, u8 value); -- cgit v1.2.2 From 07e73fbb2d52434e6b61019326f35040357e8efb Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 17 Mar 2011 21:42:30 +0000 Subject: mfd: Constify WM8994 write path Allow const buffers to be passed in without type safety issues. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm8994/core.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/wm8994/core.h b/include/linux/mfd/wm8994/core.h index cb7d3ae7da8f..f0b69cdae41c 100644 --- a/include/linux/mfd/wm8994/core.h +++ b/include/linux/mfd/wm8994/core.h @@ -59,7 +59,7 @@ struct wm8994 { int (*read_dev)(struct wm8994 *wm8994, unsigned short reg, int bytes, void *dest); int (*write_dev)(struct wm8994 *wm8994, unsigned short reg, - int bytes, void *src); + int bytes, const void *src); void *control_data; @@ -89,7 +89,7 @@ int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg, int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg, int count, u16 *buf); int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg, - int count, u16 *buf); + int count, const u16 *buf); /* Helper to save on boilerplate */ -- cgit v1.2.2 From 8bd4d7c4c500e88bff975bbcb7fe0d89da319cdd Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 15 Mar 2011 14:26:37 +0100 Subject: mfd: Rename ab8500 gpadc header Rename AB8500 GPADC header so as not to be redunantly named. Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- include/linux/mfd/ab8500/ab8500-gpadc.h | 32 -------------------------------- include/linux/mfd/ab8500/gpadc.h | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 32 insertions(+), 32 deletions(-) delete mode 100644 include/linux/mfd/ab8500/ab8500-gpadc.h create mode 100644 include/linux/mfd/ab8500/gpadc.h (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/ab8500/ab8500-gpadc.h b/include/linux/mfd/ab8500/ab8500-gpadc.h deleted file mode 100644 index 46b954011f16..000000000000 --- a/include/linux/mfd/ab8500/ab8500-gpadc.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (C) 2010 ST-Ericsson SA - * Licensed under GPLv2. - * - * Author: Arun R Murthy - * Author: Daniel Willerud - */ - -#ifndef _AB8500_GPADC_H -#define _AB8500_GPADC_H - -/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2) */ -#define BAT_CTRL 0x01 -#define BTEMP_BALL 0x02 -#define MAIN_CHARGER_V 0x03 -#define ACC_DETECT1 0x04 -#define ACC_DETECT2 0x05 -#define ADC_AUX1 0x06 -#define ADC_AUX2 0x07 -#define MAIN_BAT_V 0x08 -#define VBUS_V 0x09 -#define MAIN_CHARGER_C 0x0A -#define USB_CHARGER_C 0x0B -#define BK_BAT_V 0x0C -#define DIE_TEMP 0x0D - -struct ab8500_gpadc; - -struct ab8500_gpadc *ab8500_gpadc_get(char *name); -int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 input); - -#endif /* _AB8500_GPADC_H */ diff --git a/include/linux/mfd/ab8500/gpadc.h b/include/linux/mfd/ab8500/gpadc.h new file mode 100644 index 000000000000..46b954011f16 --- /dev/null +++ b/include/linux/mfd/ab8500/gpadc.h @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2010 ST-Ericsson SA + * Licensed under GPLv2. + * + * Author: Arun R Murthy + * Author: Daniel Willerud + */ + +#ifndef _AB8500_GPADC_H +#define _AB8500_GPADC_H + +/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2) */ +#define BAT_CTRL 0x01 +#define BTEMP_BALL 0x02 +#define MAIN_CHARGER_V 0x03 +#define ACC_DETECT1 0x04 +#define ACC_DETECT2 0x05 +#define ADC_AUX1 0x06 +#define ADC_AUX2 0x07 +#define MAIN_BAT_V 0x08 +#define VBUS_V 0x09 +#define MAIN_CHARGER_C 0x0A +#define USB_CHARGER_C 0x0B +#define BK_BAT_V 0x0C +#define DIE_TEMP 0x0D + +struct ab8500_gpadc; + +struct ab8500_gpadc *ab8500_gpadc_get(char *name); +int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 input); + +#endif /* _AB8500_GPADC_H */ -- cgit v1.2.2 From 42051e8a7bce76ebd3cd201704ee2427120636e1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 14 Mar 2011 09:52:33 +0100 Subject: mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver On sh-mobile platforms the SDHI driver was using the tmio_mmc SD/SDIO MFD cell driver. Now that the tmio_mmc driver has been split into a core and a separate MFD glue, we can support SDHI natively without the need to emulate an MFD controller. This also allows to support systems with an on-SoC SDHI controller and a separate MFD with a TMIO core. Signed-off-by: Guennadi Liakhovetski Acked-by: Paul Mundt Signed-off-by: Chris Ball --- include/linux/mfd/sh_mobile_sdhi.h | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/sh_mobile_sdhi.h b/include/linux/mfd/sh_mobile_sdhi.h index c981b959760f..10af7f901ebe 100644 --- a/include/linux/mfd/sh_mobile_sdhi.h +++ b/include/linux/mfd/sh_mobile_sdhi.h @@ -1,16 +1,7 @@ -#ifndef __SH_MOBILE_SDHI_H__ -#define __SH_MOBILE_SDHI_H__ +#ifndef MFD_SH_MOBILE_SDHI_H +#define MFD_SH_MOBILE_SDHI_H -#include +/* Compatibility header - will disappear once all platforms are converted */ +#include -struct sh_mobile_sdhi_info { - int dma_slave_tx; - int dma_slave_rx; - unsigned long tmio_flags; - unsigned long tmio_caps; - u32 tmio_ocr_mask; /* available MMC voltages */ - void (*set_pwr)(struct platform_device *pdev, int state); - int (*get_cd)(struct platform_device *pdev); -}; - -#endif /* __SH_MOBILE_SDHI_H__ */ +#endif /* MFD_SH_MOBILE_SDHI_H */ -- cgit v1.2.2 From 52c6182a47fa66ad5f2647a831efa99c05b0a54e Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 9 Mar 2011 11:33:35 +0100 Subject: mfd: remove now redundant sh_mobile_sdhi.h header Signed-off-by: Guennadi Liakhovetski Acked-by: Paul Mundt Acked-by: Samuel Ortiz Signed-off-by: Chris Ball --- include/linux/mfd/sh_mobile_sdhi.h | 7 ------- 1 file changed, 7 deletions(-) delete mode 100644 include/linux/mfd/sh_mobile_sdhi.h (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/sh_mobile_sdhi.h b/include/linux/mfd/sh_mobile_sdhi.h deleted file mode 100644 index 10af7f901ebe..000000000000 --- a/include/linux/mfd/sh_mobile_sdhi.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef MFD_SH_MOBILE_SDHI_H -#define MFD_SH_MOBILE_SDHI_H - -/* Compatibility header - will disappear once all platforms are converted */ -#include - -#endif /* MFD_SH_MOBILE_SDHI_H */ -- cgit v1.2.2 From 79568b941277b5986a8a7f0fb8578b2ccfc3e87e Mon Sep 17 00:00:00 2001 From: Bengt Jonsson Date: Fri, 11 Mar 2011 11:54:46 +0100 Subject: regulator: initialization for ab8500 regulators The regulators on the AB8500 have a lot of custom hardware control settings pertaining to 8 external signals, settings which are board-specific and need be provided from the platform at startup. Initialization added for regulators Vana, VextSupply1, VextSupply2, VextSupply3, Vaux1, Vaux2, Vaux3, VTVout, Vintcore12, Vaudio, Vdmic, Vamic1, Vamic2, VrefDDR. Signed-off-by: Bengt Jonsson Reviewed-by: Rickard Andersson Reviewed-by: Jonas Aberg Signed-off-by: Linus Walleij Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/mfd/ab8500.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h index 56f8dea72152..6e4f77ef4d20 100644 --- a/include/linux/mfd/ab8500.h +++ b/include/linux/mfd/ab8500.h @@ -139,17 +139,23 @@ struct ab8500 { u8 oldmask[AB8500_NUM_IRQ_REGS]; }; +struct regulator_reg_init; struct regulator_init_data; /** * struct ab8500_platform_data - AB8500 platform data * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used * @init: board-specific initialization after detection of ab8500 + * @num_regulator_reg_init: number of regulator init registers + * @regulator_reg_init: regulator init registers + * @num_regulator: number of regulators * @regulator: machine-specific constraints for regulators */ struct ab8500_platform_data { int irq_base; void (*init) (struct ab8500 *); + int num_regulator_reg_init; + struct ab8500_regulator_reg_init *regulator_reg_init; int num_regulator; struct regulator_init_data *regulator; }; -- cgit v1.2.2 From fa1df691688f34cbcd5bf77bd084bbe47e9d6bfe Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Mon, 21 Mar 2011 19:19:35 -0700 Subject: mfd: Add mfd_clone_cell(), convert cs5535-mfd/olpc-xo1 to it Replace mfd_shared_platform_driver_register with mfd_clone_cell. The former was called by an mfd client, and registered both a platform driver and device. The latter is called by an mfd driver, and registers only a platform device. The downside of this is that mfd drivers need to be modified whenever new clients are added that share a cell; the upside is that it fits Linux's driver model better. It's also simpler. This also converts cs5535-mfd/olpc-xo1 from the old API. cs5535-mfd now creates the olpc-xo1-{acpi,pms} devices, while olpc-xo1 binds to them via platform drivers. Signed-off-by: Andres Salomon Signed-off-by: Samuel Ortiz --- include/linux/mfd/core.h | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index 1408bf8eed5f..ad1b19aa6508 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -62,6 +62,24 @@ struct mfd_cell { extern int mfd_cell_enable(struct platform_device *pdev); extern int mfd_cell_disable(struct platform_device *pdev); +/* + * "Clone" multiple platform devices for a single cell. This is to be used + * for devices that have multiple users of a cell. For example, if an mfd + * driver wants the cell "foo" to be used by a GPIO driver, an MTD driver, + * and a platform driver, the following bit of code would be use after first + * calling mfd_add_devices(): + * + * const char *fclones[] = { "foo-gpio", "foo-mtd" }; + * err = mfd_clone_cells("foo", fclones, ARRAY_SIZE(fclones)); + * + * Each driver (MTD, GPIO, and platform driver) would then register + * platform_drivers for "foo-mtd", "foo-gpio", and "foo", respectively. + * The cell's .enable/.disable hooks should be used to deal with hardware + * resource contention. + */ +extern int mfd_clone_cell(const char *cell, const char **clones, + size_t n_clones); + /* * Given a platform device that's been created by mfd_add_devices(), fetch * the mfd_cell that created it. @@ -87,13 +105,4 @@ extern int mfd_add_devices(struct device *parent, int id, extern void mfd_remove_devices(struct device *parent); -/* - * For MFD drivers with clients sharing access to resources, these create - * multiple platform devices per cell. Contention handling must still be - * handled via drivers (ie, with enable/disable hooks). - */ -extern int mfd_shared_platform_driver_register(struct platform_driver *drv, - const char *cellname); -extern void mfd_shared_platform_driver_unregister(struct platform_driver *drv); - #endif -- cgit v1.2.2 From 8de6bc7f6ba58dd717e4a65e3bf4a746116fb874 Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Thu, 24 Mar 2011 15:54:45 +0900 Subject: mfd: Add MAX8997/8966 IRQ control This patch enables IRQ handling for MAX8997/8966 chips. Please note that Fuel-Gauge-related IRQs are not implemented in this initial release. The fuel gauge module in MAX8997 is identical to MAX17042, which is already in Linux kernel. In order to use the already-existing MAX17042 driver for fuel gauge module in MAX8997, the main interrupt handler of MAX8997 should relay related interrupts to MAX17042 driver. However, in order to do this, we need to modify MAX17042 driver as well because MAX17042 driver does not have any interrupt handlers for now. We are not going to implement this in this initial release as it is not crucial in basic operations of MAX8997. Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Samuel Ortiz --- include/linux/mfd/max8997-private.h | 21 +++++++++++++++++++++ include/linux/mfd/max8997.h | 7 +++++-- 2 files changed, 26 insertions(+), 2 deletions(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h index 93a9477e075f..69d1010e2e51 100644 --- a/include/linux/mfd/max8997-private.h +++ b/include/linux/mfd/max8997-private.h @@ -24,6 +24,8 @@ #include +#define MAX8997_REG_INVALID (0xff) + enum max8997_pmic_reg { MAX8997_REG_PMIC_ID0 = 0x00, MAX8997_REG_PMIC_ID1 = 0x01, @@ -313,6 +315,7 @@ enum max8997_irq { #define MAX8997_REG_BUCK2DVS(x) (MAX8997_REG_BUCK2DVS1 + (x) - 1) #define MAX8997_REG_BUCK5DVS(x) (MAX8997_REG_BUCK5DVS1 + (x) - 1) +#define MAX8997_NUM_GPIO 12 struct max8997_dev { struct device *dev; struct i2c_client *i2c; /* 0xcc / PMIC, Battery Control, and FLASH */ @@ -324,11 +327,19 @@ struct max8997_dev { int type; struct platform_device *battery; /* battery control (not fuel gauge) */ + int irq; + int ono; + int irq_base; bool wakeup; + struct mutex irqlock; + int irq_masks_cur[MAX8997_IRQ_GROUP_NR]; + int irq_masks_cache[MAX8997_IRQ_GROUP_NR]; /* For hibernation */ u8 reg_dump[MAX8997_REG_PMIC_END + MAX8997_MUIC_REG_END + MAX8997_HAPTIC_REG_END]; + + bool gpio_status[MAX8997_NUM_GPIO]; }; enum max8997_types { @@ -336,6 +347,10 @@ enum max8997_types { TYPE_MAX8966, }; +extern int max8997_irq_init(struct max8997_dev *max8997); +extern void max8997_irq_exit(struct max8997_dev *max8997); +extern int max8997_irq_resume(struct max8997_dev *max8997); + extern int max8997_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest); extern int max8997_bulk_read(struct i2c_client *i2c, u8 reg, int count, u8 *buf); @@ -344,4 +359,10 @@ extern int max8997_bulk_write(struct i2c_client *i2c, u8 reg, int count, u8 *buf); extern int max8997_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask); +#define MAX8997_GPIO_INT_BOTH (0x3 << 4) +#define MAX8997_GPIO_INT_RISE (0x2 << 4) +#define MAX8997_GPIO_INT_FALL (0x1 << 4) + +#define MAX8997_GPIO_INT_MASK (0x3 << 4) +#define MAX8997_GPIO_DATA_MASK (0x1 << 2) #endif /* __LINUX_MFD_MAX8997_PRIV_H */ diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index cb671b3451bf..60931d089422 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -78,8 +78,11 @@ struct max8997_regulator_data { }; struct max8997_platform_data { - bool wakeup; - /* IRQ: Not implemented */ + /* IRQ */ + int irq_base; + int ono; + int wakeup; + /* ---- PMIC ---- */ struct max8997_regulator_data *regulators; int num_regulators; -- cgit v1.2.2 From 0cb3fcd72cc3e6dd88f0e769746d294e5e6bafa9 Mon Sep 17 00:00:00 2001 From: Bibek Basu Date: Wed, 9 Feb 2011 11:02:35 +0530 Subject: gpio: driver for 42 AB8500 GPIO pins To get rid of port expanders, the free GPIOs of ab8500 can be used. There are 42 GPIO pins. Out of which 16 are interrupt capable.This patch implements 16 virtual IRQ mapped to 16 interrupt capable AB8500 GPIOs. Signed-off-by: Bibek Basu Acked-by: Grant Likely [Renamed header file as per MFD structure] Signed-off-by: Linus Walleij --- include/linux/mfd/ab8500.h | 41 +++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/ab8500/gpio.h | 21 +++++++++++++++++++++ 2 files changed, 62 insertions(+) create mode 100644 include/linux/mfd/ab8500/gpio.h (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h index 6e4f77ef4d20..b31843075198 100644 --- a/include/linux/mfd/ab8500.h +++ b/include/linux/mfd/ab8500.h @@ -74,6 +74,45 @@ #define AB8500_INT_ACC_DETECT_21DB_F 37 #define AB8500_INT_ACC_DETECT_21DB_R 38 #define AB8500_INT_GP_SW_ADC_CONV_END 39 +#define AB8500_INT_ACC_DETECT_1DB_F 33 +#define AB8500_INT_ACC_DETECT_1DB_R 34 +#define AB8500_INT_ACC_DETECT_22DB_F 35 +#define AB8500_INT_ACC_DETECT_22DB_R 36 +#define AB8500_INT_ACC_DETECT_21DB_F 37 +#define AB8500_INT_ACC_DETECT_21DB_R 38 +#define AB8500_INT_GP_SW_ADC_CONV_END 39 +#define AB8500_INT_GPIO6R 40 +#define AB8500_INT_GPIO7R 41 +#define AB8500_INT_GPIO8R 42 +#define AB8500_INT_GPIO9R 43 +#define AB8500_INT_GPIO10R 44 +#define AB8500_INT_GPIO11R 45 +#define AB8500_INT_GPIO12R 46 +#define AB8500_INT_GPIO13R 47 +#define AB8500_INT_GPIO24R 48 +#define AB8500_INT_GPIO25R 49 +#define AB8500_INT_GPIO36R 50 +#define AB8500_INT_GPIO37R 51 +#define AB8500_INT_GPIO38R 52 +#define AB8500_INT_GPIO39R 53 +#define AB8500_INT_GPIO40R 54 +#define AB8500_INT_GPIO41R 55 +#define AB8500_INT_GPIO6F 56 +#define AB8500_INT_GPIO7F 57 +#define AB8500_INT_GPIO8F 58 +#define AB8500_INT_GPIO9F 59 +#define AB8500_INT_GPIO10F 60 +#define AB8500_INT_GPIO11F 61 +#define AB8500_INT_GPIO12F 62 +#define AB8500_INT_GPIO13F 63 +#define AB8500_INT_GPIO24F 64 +#define AB8500_INT_GPIO25F 65 +#define AB8500_INT_GPIO36F 66 +#define AB8500_INT_GPIO37F 67 +#define AB8500_INT_GPIO38F 68 +#define AB8500_INT_GPIO39F 69 +#define AB8500_INT_GPIO40F 70 +#define AB8500_INT_GPIO41F 71 #define AB8500_INT_ADP_SOURCE_ERROR 72 #define AB8500_INT_ADP_SINK_ERROR 73 #define AB8500_INT_ADP_PROBE_PLUG 74 @@ -141,6 +180,7 @@ struct ab8500 { struct regulator_reg_init; struct regulator_init_data; +struct ab8500_gpio_platform_data; /** * struct ab8500_platform_data - AB8500 platform data @@ -158,6 +198,7 @@ struct ab8500_platform_data { struct ab8500_regulator_reg_init *regulator_reg_init; int num_regulator; struct regulator_init_data *regulator; + struct ab8500_gpio_platform_data *gpio; }; extern int __devinit ab8500_init(struct ab8500 *ab8500); diff --git a/include/linux/mfd/ab8500/gpio.h b/include/linux/mfd/ab8500/gpio.h new file mode 100644 index 000000000000..488a8c920a29 --- /dev/null +++ b/include/linux/mfd/ab8500/gpio.h @@ -0,0 +1,21 @@ +/* + * Copyright ST-Ericsson 2010. + * + * Author: Bibek Basu + * Licensed under GPLv2. + */ + +#ifndef _AB8500_GPIO_H +#define _AB8500_GPIO_H + +/* + * Platform data to register a block: only the initial gpio/irq number. + */ + +struct ab8500_gpio_platform_data { + int gpio_base; + u32 irq_base; + u8 config_reg[7]; +}; + +#endif /* _AB8500_GPIO_H */ -- cgit v1.2.2