From 31b4ff06e01a9a98a8e6ae6e8c42213648eec1d1 Mon Sep 17 00:00:00 2001 From: Balaji Rao Date: Thu, 5 Nov 2009 00:24:55 +0300 Subject: pcf50633: introduces battery charging current control Implement a new sysfs attribute to allow changing MBC charging limit on the fly independently of usb current limit. It also gets set automatically every time usb current limit is changed. Limiting charging current also prevents violating USB specification in the case when the whole device is shut down and usb current limit is reset to the factory default by the pcf50633 state transition. Signed-off-by: Balaji Rao Signed-off-by: Paul Fertser Signed-off-by: Anton Vorontsov --- include/linux/mfd/pcf50633/core.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h index 9aba7b779fbc..09af8fdfbb5d 100644 --- a/include/linux/mfd/pcf50633/core.h +++ b/include/linux/mfd/pcf50633/core.h @@ -31,6 +31,13 @@ struct pcf50633_platform_data { int charging_restart_interval; + /* + * Should be set accordingly to the reference resistor used, see + * I_{ch(ref)} charger reference current in the pcf50633 User + * Manual. + */ + int charger_reference_current_ma; + /* Callbacks */ void (*probe_done)(struct pcf50633 *); void (*mbc_event_callback)(struct pcf50633 *, int); -- cgit v1.2.2 From e98c73a24f33d6f54402f5cef2e7bf282d1d1fcc Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Thu, 5 Nov 2009 00:24:57 +0300 Subject: pcf50633: Get rid of charging restart software auto-triggering After reaching Battery Full condition MBC state machine switches back into charging mode when the battery voltage falls below 96% of a battery float voltage. The voltage drop in Li-Ion batteries is marginal (1-2%) till about 80% of its capacity - which means, after a BATFULL, charging won't be restarted until 75-80%. That is a desired behaviour recommended by battery manufacturers, don't mess with it. Signed-off-by: Paul Fertser Signed-off-by: Anton Vorontsov --- include/linux/mfd/pcf50633/core.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h index 09af8fdfbb5d..46df7f053c29 100644 --- a/include/linux/mfd/pcf50633/core.h +++ b/include/linux/mfd/pcf50633/core.h @@ -29,8 +29,6 @@ struct pcf50633_platform_data { char **batteries; int num_batteries; - int charging_restart_interval; - /* * Should be set accordingly to the reference resistor used, see * I_{ch(ref)} charger reference current in the pcf50633 User -- cgit v1.2.2 From c329795052aa339850a45fab649ab97a36905136 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Thu, 5 Nov 2009 00:24:59 +0300 Subject: pcf50633: Query charger status directly Current scheme is fragile and is likely to go off sync, especially on batfull->adapter charging automatic MBC transition. Query the status bit every time we need it instead. We need to export another function to query for USB presence because we can't read anything from PCF50633 (via I2C) inside irq context and that is needed by usb gadgets. Signed-off-by: Paul Fertser Signed-off-by: Anton Vorontsov --- include/linux/mfd/pcf50633/mbc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/pcf50633/mbc.h b/include/linux/mfd/pcf50633/mbc.h index 4119579acf2c..df4f5fa88de3 100644 --- a/include/linux/mfd/pcf50633/mbc.h +++ b/include/linux/mfd/pcf50633/mbc.h @@ -128,6 +128,7 @@ enum pcf50633_reg_mbcs3 { int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma); int pcf50633_mbc_get_status(struct pcf50633 *); +int pcf50633_mbc_get_usb_online_status(struct pcf50633 *); #endif -- cgit v1.2.2 From e24a04c44cf312e88b50006a91ad7ffc1c0d97a5 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 22 Sep 2009 08:47:11 -0700 Subject: regulator: Implement WM831x BuckWise DC-DC convertor DVS support The BuckWise DC-DC convertors in WM831x devices support switching to a second output voltage using the logic level on one of the device pins. This is intended to allow rapid voltage switching for uses like cpufreq, replacing the I2C or SPI write used to configure the voltage of the regulator with a much faster GPIO status change. This is implemented by keeping the DVS voltage configured as the maximum voltage permitted for the regulator. If a request is made for the maximum voltage then the GPIO is used to switch to the DVS voltage, otherwise the normal ON voltage is updated and used. This follows the idiom used by most cpufreq drivers, which drop the minimum voltage as the core frequency is dropped but use a constant maximum - raising the voltage should normally be fast, but lowering it may be slower. Configuration of the DVS MFP on the device should be done externally, for example via OTP. Support is present in the hardware for monitoring the status of the transition using a second GPIO. This is not currently implemented but platform data is provided for it - the driver currently assumes that the device will be configured to transition immediately - but platform data is provided to reduce merge issues once it is. Signed-off-by: Mark Brown Acked-by: Samuel Ortiz Signed-off-by: Liam Girdwood --- include/linux/mfd/wm831x/pdata.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h index 415c228743d5..fd322aca33ba 100644 --- a/include/linux/mfd/wm831x/pdata.h +++ b/include/linux/mfd/wm831x/pdata.h @@ -41,6 +41,23 @@ struct wm831x_battery_pdata { int timeout; /** Charge cycle timeout, in minutes */ }; +/** + * Configuration for the WM831x DC-DC BuckWise convertors. This + * should be passed as driver_data in the regulator_init_data. + * + * Currently all the configuration is for the fast DVS switching + * support of the devices. This allows MFPs on the device to be + * configured as an input to switch between two output voltages, + * allowing voltage transitions without the expense of an access over + * I2C or SPI buses. + */ +struct wm831x_buckv_pdata { + int dvs_gpio; /** CPU GPIO to use for DVS switching */ + int dvs_control_src; /** Hardware DVS source to use (1 or 2) */ + int dvs_init_state; /** DVS state to expect on startup */ + int dvs_state_gpio; /** CPU GPIO to use for monitoring status */ +}; + /* Sources for status LED configuration. Values are register values * plus 1 to allow for a zero default for preserve. */ -- cgit v1.2.2 From 9dffe2a32b0deef52605d50527c0d240b15cabf7 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 4 Jan 2010 18:05:00 +0000 Subject: mfd: Correct WM835x ISINK ramp time defines The constants used to specify ISINK ramp times for WM835x had the wrong shifts so that the on times applied to the off ramp and vice versa. The masks for the bitfields are correct. Signed-off-by: Mark Brown Cc: stable@kernel.org Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm8350/pmic.h | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/wm8350/pmic.h b/include/linux/mfd/wm8350/pmic.h index be3264e286e0..e786fe9841ef 100644 --- a/include/linux/mfd/wm8350/pmic.h +++ b/include/linux/mfd/wm8350/pmic.h @@ -666,20 +666,20 @@ #define WM8350_ISINK_FLASH_DUR_64MS (1 << 8) #define WM8350_ISINK_FLASH_DUR_96MS (2 << 8) #define WM8350_ISINK_FLASH_DUR_1024MS (3 << 8) -#define WM8350_ISINK_FLASH_ON_INSTANT (0 << 4) -#define WM8350_ISINK_FLASH_ON_0_25S (1 << 4) -#define WM8350_ISINK_FLASH_ON_0_50S (2 << 4) -#define WM8350_ISINK_FLASH_ON_1_00S (3 << 4) -#define WM8350_ISINK_FLASH_ON_1_95S (1 << 4) -#define WM8350_ISINK_FLASH_ON_3_91S (2 << 4) -#define WM8350_ISINK_FLASH_ON_7_80S (3 << 4) -#define WM8350_ISINK_FLASH_OFF_INSTANT (0 << 0) -#define WM8350_ISINK_FLASH_OFF_0_25S (1 << 0) -#define WM8350_ISINK_FLASH_OFF_0_50S (2 << 0) -#define WM8350_ISINK_FLASH_OFF_1_00S (3 << 0) -#define WM8350_ISINK_FLASH_OFF_1_95S (1 << 0) -#define WM8350_ISINK_FLASH_OFF_3_91S (2 << 0) -#define WM8350_ISINK_FLASH_OFF_7_80S (3 << 0) +#define WM8350_ISINK_FLASH_ON_INSTANT (0 << 0) +#define WM8350_ISINK_FLASH_ON_0_25S (1 << 0) +#define WM8350_ISINK_FLASH_ON_0_50S (2 << 0) +#define WM8350_ISINK_FLASH_ON_1_00S (3 << 0) +#define WM8350_ISINK_FLASH_ON_1_95S (1 << 0) +#define WM8350_ISINK_FLASH_ON_3_91S (2 << 0) +#define WM8350_ISINK_FLASH_ON_7_80S (3 << 0) +#define WM8350_ISINK_FLASH_OFF_INSTANT (0 << 4) +#define WM8350_ISINK_FLASH_OFF_0_25S (1 << 4) +#define WM8350_ISINK_FLASH_OFF_0_50S (2 << 4) +#define WM8350_ISINK_FLASH_OFF_1_00S (3 << 4) +#define WM8350_ISINK_FLASH_OFF_1_95S (1 << 4) +#define WM8350_ISINK_FLASH_OFF_3_91S (2 << 4) +#define WM8350_ISINK_FLASH_OFF_7_80S (3 << 4) /* * Regulator Interrupts. -- cgit v1.2.2 From 64e8867ba8098b69889c1af94997a5ba2348fb26 Mon Sep 17 00:00:00 2001 From: Ian Molton Date: Wed, 6 Jan 2010 13:51:48 +0100 Subject: mfd: tmio_mmc hardware abstraction for CNF area This patch abstracts out the CNF area code from tmio_mmc which is not present in all hardware that can use this driver. This is required so that we can support non-toshiba based hardware. ASIC3 support by Philipp Zabel Signed-off-by: Ian Molton Signed-off-by: Magnus Damm Signed-off-by: Samuel Ortiz --- include/linux/mfd/tmio.h | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 6b9c5d06690c..9cb1834deffa 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -2,6 +2,8 @@ #define MFD_TMIO_H #include +#include +#include #define tmio_ioread8(addr) readb(addr) #define tmio_ioread16(addr) readw(addr) @@ -18,11 +20,48 @@ writew((val) >> 16, (addr) + 2); \ } while (0) +#define CNF_CMD 0x04 +#define CNF_CTL_BASE 0x10 +#define CNF_INT_PIN 0x3d +#define CNF_STOP_CLK_CTL 0x40 +#define CNF_GCLK_CTL 0x41 +#define CNF_SD_CLK_MODE 0x42 +#define CNF_PIN_STATUS 0x44 +#define CNF_PWR_CTL_1 0x48 +#define CNF_PWR_CTL_2 0x49 +#define CNF_PWR_CTL_3 0x4a +#define CNF_CARD_DETECT_MODE 0x4c +#define CNF_SD_SLOT 0x50 +#define CNF_EXT_GCLK_CTL_1 0xf0 +#define CNF_EXT_GCLK_CTL_2 0xf1 +#define CNF_EXT_GCLK_CTL_3 0xf9 +#define CNF_SD_LED_EN_1 0xfa +#define CNF_SD_LED_EN_2 0xfe + +#define SDCREN 0x2 /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/ + +#define sd_config_write8(base, shift, reg, val) \ + tmio_iowrite8((val), (base) + ((reg) << (shift))) +#define sd_config_write16(base, shift, reg, val) \ + tmio_iowrite16((val), (base) + ((reg) << (shift))) +#define sd_config_write32(base, shift, reg, val) \ + do { \ + tmio_iowrite16((val), (base) + ((reg) << (shift))); \ + tmio_iowrite16((val) >> 16, (base) + ((reg + 2) << (shift))); \ + } while (0) + +int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); +int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); +void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state); +void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state); + /* * data for the MMC controller */ struct tmio_mmc_data { const unsigned int hclk; + void (*set_pwr)(struct platform_device *host, int state); + void (*set_clk_div)(struct platform_device *host, int state); }; /* -- cgit v1.2.2