From b9675136e2ad95156fb93be6155f17590bb26fd7 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Wed, 6 Dec 2006 20:41:02 -0800 Subject: [PATCH] IPMI: Add maintenance mode Some commands and operations on a BMC can cause the BMC to "go away" for a while. This can cause the automatic flag processing and other things of that nature to timeout and generate annoying logs, or possibly cause other bad things to happen when in firmware update mode. Add detection of those commands (cold reset, warm reset, and any firmware command) and turns off automatic processing for 30 seconds. It also add a manual override either way. Signed-off-by: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ipmi_msgdefs.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux/ipmi_msgdefs.h') diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h index 4d04d8b58a0a..8d6759cc1a71 100644 --- a/include/linux/ipmi_msgdefs.h +++ b/include/linux/ipmi_msgdefs.h @@ -46,6 +46,8 @@ #define IPMI_NETFN_APP_REQUEST 0x06 #define IPMI_NETFN_APP_RESPONSE 0x07 #define IPMI_GET_DEVICE_ID_CMD 0x01 +#define IPMI_COLD_RESET_CMD 0x02 +#define IPMI_WARM_RESET_CMD 0x03 #define IPMI_CLEAR_MSG_FLAGS_CMD 0x30 #define IPMI_GET_DEVICE_GUID_CMD 0x08 #define IPMI_GET_MSG_FLAGS_CMD 0x31 @@ -60,6 +62,9 @@ #define IPMI_NETFN_STORAGE_RESPONSE 0x0b #define IPMI_ADD_SEL_ENTRY_CMD 0x44 +#define IPMI_NETFN_FIRMWARE_REQUEST 0x08 +#define IPMI_NETFN_FIRMWARE_RESPONSE 0x09 + /* The default slave address */ #define IPMI_BMC_SLAVE_ADDR 0x20 -- cgit v1.2.2 From 4d7cbac7c870ca66d8fb27d68188efbb5de2dffa Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Wed, 6 Dec 2006 20:41:14 -0800 Subject: [PATCH] IPMI: Fix BT long busy The IPMI BT subdriver has been patched to survive "long busy" timeouts seen during firmware upgrades and resets. The patch never returns the HOSED state, synthesizes response messages with meaningful completion codes, and recovers gracefully when the hardware finishes the long busy. The subdriver now issues a "Get BT Capabilities" command and properly uses those results. More informative completion codes are returned on error from transaction starts; this logic was propogated to the KCS and SMIC subdrivers. Finally, indent and other style quirks were normalized. Signed-off-by: Rocky Craig Signed-off-by: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ipmi_msgdefs.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux/ipmi_msgdefs.h') diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h index 8d6759cc1a71..b56a158d587a 100644 --- a/include/linux/ipmi_msgdefs.h +++ b/include/linux/ipmi_msgdefs.h @@ -71,14 +71,18 @@ /* The BT interface on high-end HP systems supports up to 255 bytes in * one transfer. Its "virtual" BMC supports some commands that are longer * than 128 bytes. Use the full 256, plus NetFn/LUN, Cmd, cCode, plus - * some overhead. It would be nice to base this on the "BT Capabilities" - * but that's too hard to propagate to the rest of the driver. */ + * some overhead; it's not worth the effort to dynamically size this based + * on the results of the "Get BT Capabilities" command. */ #define IPMI_MAX_MSG_LENGTH 272 /* multiple of 16 */ #define IPMI_CC_NO_ERROR 0x00 #define IPMI_NODE_BUSY_ERR 0xc0 #define IPMI_INVALID_COMMAND_ERR 0xc1 +#define IPMI_TIMEOUT_ERR 0xc3 #define IPMI_ERR_MSG_TRUNCATED 0xc6 +#define IPMI_REQ_LEN_INVALID_ERR 0xc7 +#define IPMI_REQ_LEN_EXCEEDED_ERR 0xc8 +#define IPMI_NOT_IN_MY_STATE_ERR 0xd5 /* IPMI 2.0 */ #define IPMI_LOST_ARBITRATION_ERR 0x81 #define IPMI_BUS_ERR 0x82 #define IPMI_NAK_ON_WRITE_ERR 0x83 -- cgit v1.2.2