From 0f78231bffb868a30e8533aace142213266bb811 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 1 Dec 2009 13:37:02 +0100 Subject: mac80211: enable spatial multiplexing powersave Enable spatial multiplexing in mac80211 by telling the driver what to do and, where necessary, sending action frames to the AP to update the requested SMPS mode. Also includes a trivial implementation for hwsim that just logs the requested mode. For now, the userspace interface is in debugfs only, and let you toggle the requested mode at any time. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) (limited to 'include/linux/ieee80211.h') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index d9724a28c0c2..e8d43d0ff2c3 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -707,6 +707,10 @@ struct ieee80211_mgmt { u8 action; u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN]; } __attribute__ ((packed)) sa_query; + struct { + u8 action; + u8 smps_control; + } __attribute__ ((packed)) ht_smps; } u; } __attribute__ ((packed)) action; } u; @@ -824,6 +828,7 @@ struct ieee80211_ht_cap { #define IEEE80211_HT_CAP_LDPC_CODING 0x0001 #define IEEE80211_HT_CAP_SUP_WIDTH_20_40 0x0002 #define IEEE80211_HT_CAP_SM_PS 0x000C +#define IEEE80211_HT_CAP_SM_PS_SHIFT 2 #define IEEE80211_HT_CAP_GRN_FLD 0x0010 #define IEEE80211_HT_CAP_SGI_20 0x0020 #define IEEE80211_HT_CAP_SGI_40 0x0040 @@ -839,6 +844,7 @@ struct ieee80211_ht_cap { /* 802.11n HT capability AMPDU settings (for ampdu_params_info) */ #define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03 #define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C +#define IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT 2 /* * Maximum length of AMPDU that the STA can receive. @@ -922,12 +928,17 @@ struct ieee80211_ht_info { #define IEEE80211_MAX_AMPDU_BUF 0x40 -/* Spatial Multiplexing Power Save Modes */ +/* Spatial Multiplexing Power Save Modes (for capability) */ #define WLAN_HT_CAP_SM_PS_STATIC 0 #define WLAN_HT_CAP_SM_PS_DYNAMIC 1 #define WLAN_HT_CAP_SM_PS_INVALID 2 #define WLAN_HT_CAP_SM_PS_DISABLED 3 +/* for SM power control field lower two bits */ +#define WLAN_HT_SMPS_CONTROL_DISABLED 0 +#define WLAN_HT_SMPS_CONTROL_STATIC 1 +#define WLAN_HT_SMPS_CONTROL_DYNAMIC 3 + /* Authentication algorithms */ #define WLAN_AUTH_OPEN 0 #define WLAN_AUTH_SHARED_KEY 1 @@ -1150,6 +1161,18 @@ enum ieee80211_spectrum_mgmt_actioncode { WLAN_ACTION_SPCT_CHL_SWITCH = 4, }; +/* HT action codes */ +enum ieee80211_ht_actioncode { + WLAN_HT_ACTION_NOTIFY_CHANWIDTH = 0, + WLAN_HT_ACTION_SMPS = 1, + WLAN_HT_ACTION_PSMP = 2, + WLAN_HT_ACTION_PCO_PHASE = 3, + WLAN_HT_ACTION_CSI = 4, + WLAN_HT_ACTION_NONCOMPRESSED_BF = 5, + WLAN_HT_ACTION_COMPRESSED_BF = 6, + WLAN_HT_ACTION_ASEL_IDX_FEEDBACK = 7, +}; + /* Security key length */ enum ieee80211_key_len { WLAN_KEY_LEN_WEP40 = 5, -- cgit v1.2.2 From 9da3e068142ec7856b2f13261dcf0660fad32b61 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 7 Dec 2009 15:57:50 -0500 Subject: mac80211: only bother printing highest data rate on debugfs if its set IEEE-802.11n spec says the RX highest data rate field does not specify the highest supported RX data rate if its not set. Ignore it if not set then. Refer to section 7.3.56.4 Cc: johannes@sipsolutions.net Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux/ieee80211.h') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index e8d43d0ff2c3..098bedcde9bb 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -775,7 +775,10 @@ struct ieee80211_bar { /** * struct ieee80211_mcs_info - MCS information * @rx_mask: RX mask - * @rx_highest: highest supported RX rate + * @rx_highest: highest supported RX rate. If set represents + * the highest supported RX data rate in units of 1 Mbps. + * If this field is 0 this value should not be used to + * consider the highest RX data rate supported. * @tx_params: TX parameters */ struct ieee80211_mcs_info { -- cgit v1.2.2 From 8e664fb3fd2b04e3ac5fad7f046000ba54e0e275 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 23 Dec 2009 13:15:38 +0100 Subject: mac80211: split up and insert custom IEs correctly Currently, we insert all user-specified IEs before the HT IE for association, and after the HT IE for probe requests. For association, that's correct only if the user-specified IEs are RSN only, incorrect in all other cases including WPA. Change this to split apart the user-specified IEs in two places for association: before the HT IE (e.g. RSN), after the HT IE (generally empty right now I think?) and after WMM (all other vendor-specific IEs). For probes, split the IEs in different places to be correct according to the spec. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 39 ++++++++++++++++++++++++++++++--------- 1 file changed, 30 insertions(+), 9 deletions(-) (limited to 'include/linux/ieee80211.h') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index d62edc7df3ae..aeea282bd2fe 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1085,12 +1085,12 @@ enum ieee80211_eid { WLAN_EID_TIM = 5, WLAN_EID_IBSS_PARAMS = 6, WLAN_EID_CHALLENGE = 16, - /* 802.11d */ + WLAN_EID_COUNTRY = 7, WLAN_EID_HP_PARAMS = 8, WLAN_EID_HP_TABLE = 9, WLAN_EID_REQUEST = 10, - /* 802.11e */ + WLAN_EID_QBSS_LOAD = 11, WLAN_EID_EDCA_PARAM_SET = 12, WLAN_EID_TSPEC = 13, @@ -1113,7 +1113,7 @@ enum ieee80211_eid { WLAN_EID_PREP = 69, WLAN_EID_PERR = 70, WLAN_EID_RANN = 49, /* compatible with FreeBSD */ - /* 802.11h */ + WLAN_EID_PWR_CONSTRAINT = 32, WLAN_EID_PWR_CAPABILITY = 33, WLAN_EID_TPC_REQUEST = 34, @@ -1124,20 +1124,41 @@ enum ieee80211_eid { WLAN_EID_MEASURE_REPORT = 39, WLAN_EID_QUIET = 40, WLAN_EID_IBSS_DFS = 41, - /* 802.11g */ + WLAN_EID_ERP_INFO = 42, WLAN_EID_EXT_SUPP_RATES = 50, - /* 802.11n */ + WLAN_EID_HT_CAPABILITY = 45, WLAN_EID_HT_INFORMATION = 61, - /* 802.11i */ + WLAN_EID_RSN = 48, - WLAN_EID_TIMEOUT_INTERVAL = 56, - WLAN_EID_MMIE = 76 /* 802.11w */, + WLAN_EID_MMIE = 76, WLAN_EID_WPA = 221, WLAN_EID_GENERIC = 221, WLAN_EID_VENDOR_SPECIFIC = 221, - WLAN_EID_QOS_PARAMETER = 222 + WLAN_EID_QOS_PARAMETER = 222, + + WLAN_EID_AP_CHAN_REPORT = 51, + WLAN_EID_NEIGHBOR_REPORT = 52, + WLAN_EID_RCPI = 53, + WLAN_EID_BSS_AVG_ACCESS_DELAY = 63, + WLAN_EID_ANTENNA_INFO = 64, + WLAN_EID_RSNI = 65, + WLAN_EID_MEASUREMENT_PILOT_TX_INFO = 66, + WLAN_EID_BSS_AVAILABLE_CAPACITY = 67, + WLAN_EID_BSS_AC_ACCESS_DELAY = 68, + WLAN_EID_RRM_ENABLED_CAPABILITIES = 70, + WLAN_EID_MULTIPLE_BSSID = 71, + + WLAN_EID_MOBILITY_DOMAIN = 54, + WLAN_EID_FAST_BSS_TRANSITION = 55, + WLAN_EID_TIMEOUT_INTERVAL = 56, + WLAN_EID_RIC_DATA = 57, + WLAN_EID_RIC_DESCRIPTOR = 75, + + WLAN_EID_DSE_REGISTERED_LOCATION = 58, + WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59, + WLAN_EID_EXT_CHANSWITCH_ANN = 60, }; /* Action category code */ -- cgit v1.2.2 From 7044cc565b45a898c140fb185174a66f2d68a163 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Tue, 5 Jan 2010 20:16:19 +0200 Subject: mac80211: add functions to create PS Poll and Nullfunc templates Some hardware, for example wl1251 and wl1271, handle the transmission of power save related frames in hardware, but the driver is responsible for creating the templates. It's better to create the templates in mac80211, that way all drivers can benefit from this. Add two new functions, ieee80211_pspoll_get() and ieee80211_nullfunc_get() which drivers need to call to get the frame. Drivers are also responsible for updating the templates after each association. Also new struct ieee80211_hdr_3addr is added to ieee80211.h to make it easy to calculate length of the Nullfunc frame. Signed-off-by: Kalle Valo Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux/ieee80211.h') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index aeea282bd2fe..602c0692c3fc 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -130,6 +130,15 @@ struct ieee80211_hdr { u8 addr4[6]; } __attribute__ ((packed)); +struct ieee80211_hdr_3addr { + __le16 frame_control; + __le16 duration_id; + u8 addr1[6]; + u8 addr2[6]; + u8 addr3[6]; + __le16 seq_ctrl; +} __attribute__ ((packed)); + /** * ieee80211_has_tods - check if IEEE80211_FCTL_TODS is set * @fc: frame control bytes in little-endian byteorder -- cgit v1.2.2 From ab13315af97919fae0e014748105fdc2e30afb2d Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Tue, 12 Jan 2010 10:42:31 +0200 Subject: mac80211: add U-APSD client support Add Unscheduled Automatic Power-Save Delivery (U-APSD) client support. The idea is that the data frames from the client trigger AP to send the buffered frames with ACs which have U-APSD enabled. This decreases latency and makes it possible to save even more power. Driver needs to use IEEE80211_HW_UAPSD to enable the feature. The current implementation assumes that firmware takes care of the wakeup and hardware needing IEEE80211_HW_PS_NULLFUNC_STACK is not yet supported. Tested with wl1251 on a Nokia N900 and Cisco Aironet 1231G AP and running various test traffic with ping. Signed-off-by: Kalle Valo Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/linux/ieee80211.h') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 602c0692c3fc..a8c6069a0d9f 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -120,6 +120,24 @@ #define IEEE80211_QOS_CTL_TID_MASK 0x000F #define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007 +/* U-APSD queue for WMM IEs sent by AP */ +#define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD (1<<7) + +/* U-APSD queues for WMM IEs sent by STA */ +#define IEEE80211_WMM_IE_STA_QOSINFO_AC_VO (1<<0) +#define IEEE80211_WMM_IE_STA_QOSINFO_AC_VI (1<<1) +#define IEEE80211_WMM_IE_STA_QOSINFO_AC_BK (1<<2) +#define IEEE80211_WMM_IE_STA_QOSINFO_AC_BE (1<<3) +#define IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK 0x0f + +/* U-APSD max SP length for WMM IEs sent by STA */ +#define IEEE80211_WMM_IE_STA_QOSINFO_SP_ALL 0x00 +#define IEEE80211_WMM_IE_STA_QOSINFO_SP_2 0x01 +#define IEEE80211_WMM_IE_STA_QOSINFO_SP_4 0x02 +#define IEEE80211_WMM_IE_STA_QOSINFO_SP_6 0x03 +#define IEEE80211_WMM_IE_STA_QOSINFO_SP_MASK 0x03 +#define IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT 5 + struct ieee80211_hdr { __le16 frame_control; __le16 duration_id; -- cgit v1.2.2 From 558a6669d7cb407fbb0b5aec184b5c3b9a893d30 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Tue, 12 Jan 2010 10:43:00 +0200 Subject: ieee80211: add struct ieee80211_hdr_qos The header can be used to create qos nullfunc frames, for example. Signed-off-by: Kalle Valo Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux/ieee80211.h') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index a8c6069a0d9f..842701906ae9 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -157,6 +157,16 @@ struct ieee80211_hdr_3addr { __le16 seq_ctrl; } __attribute__ ((packed)); +struct ieee80211_qos_hdr { + __le16 frame_control; + __le16 duration_id; + u8 addr1[6]; + u8 addr2[6]; + u8 addr3[6]; + __le16 seq_ctrl; + __le16 qos_ctrl; +} __attribute__ ((packed)); + /** * ieee80211_has_tods - check if IEEE80211_FCTL_TODS is set * @fc: frame control bytes in little-endian byteorder -- cgit v1.2.2 From d0dd2de0d055f0ffb1e2ecdc21380de9d12a85e2 Mon Sep 17 00:00:00 2001 From: Andriy Tkachuk Date: Wed, 20 Jan 2010 13:55:06 +0200 Subject: mac80211: Account HT Control field in Data frame hdrlen according to 802.11n-2009 ieee80211_hdrlen() should account account new HT Control field in 802.11 data frame header introduced by IEEE 802.11n standard. According to 802.11n-2009 HT Control field is present in data frames when both of following are met: 1. It is QoS data frame. 2. Order bit is set in Frame Control field. The change might be totally compatible with legacy non-11n aware frames, because 802.11-2007 standard states that "all QoS STAs set this subfield to 0". Signed-off-by: Andriy V. Tkachuk Acked-by : Benoit Papillault Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/ieee80211.h') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 842701906ae9..19984958ab7b 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -138,6 +138,8 @@ #define IEEE80211_WMM_IE_STA_QOSINFO_SP_MASK 0x03 #define IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT 5 +#define IEEE80211_HT_CTL_LEN 4 + struct ieee80211_hdr { __le16 frame_control; __le16 duration_id; -- cgit v1.2.2 From 098a607091426e79178b9a6c318d993fea131791 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 6 Apr 2010 11:18:47 +0200 Subject: mac80211: clean up/fix aggregation code The aggregation code has a number of quirks, like inventing an unneeded WLAN_BACK_TIMER value and leaking memory under certain circumstances during station destruction. Fix these issues by using the regular aggregation session teardown code and blocking new aggregation sessions, all before the station is really destructed. As a side effect, this gets rid of the long code block to destroy aggregation safely. Additionally, rename tid_state_rx which can only have the values IDLE and OPERATIONAL to tid_active_rx to make it easier to understand that there is no bitwise stuff going on on the RX side -- the TX side remains because it needs to keep track of the driver and peer states. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux/ieee80211.h') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 19984958ab7b..e9e03b02cb08 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1324,7 +1324,6 @@ enum ieee80211_back_actioncode { enum ieee80211_back_parties { WLAN_BACK_RECIPIENT = 0, WLAN_BACK_INITIATOR = 1, - WLAN_BACK_TIMER = 2, }; /* SA Query action */ -- cgit v1.2.2 From 97ad9139fd68b5c71f44d28d3f9788d89cfd4916 Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Mon, 29 Mar 2010 11:00:21 -0700 Subject: mac80211: Moved mesh action codes to a more visible location Grouped mesh action codes together with the other action codes in ieee80211.h. Signed-off-by: Javier Cardona Reviewed-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/ieee80211.h') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index e9e03b02cb08..1252ba1fbff5 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1211,6 +1211,8 @@ enum ieee80211_category { WLAN_CATEGORY_SA_QUERY = 8, WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION = 9, WLAN_CATEGORY_WMM = 17, + WLAN_CATEGORY_MESH_PLINK = 30, /* Pending ANA approval */ + WLAN_CATEGORY_MESH_PATH_SEL = 32, /* Pending ANA approval */ WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126, WLAN_CATEGORY_VENDOR_SPECIFIC = 127, }; -- cgit v1.2.2 From f79d9bad37cb1e7ef23d60b1dd0b7859957ced9e Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 19 Apr 2010 19:57:35 +0200 Subject: mac80211: add flags for STBC (Space-Time Block Coding) Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/ieee80211.h') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 1252ba1fbff5..97b2eae6a22c 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -876,6 +876,7 @@ struct ieee80211_ht_cap { #define IEEE80211_HT_CAP_SGI_40 0x0040 #define IEEE80211_HT_CAP_TX_STBC 0x0080 #define IEEE80211_HT_CAP_RX_STBC 0x0300 +#define IEEE80211_HT_CAP_RX_STBC_SHIFT 8 #define IEEE80211_HT_CAP_DELAY_BA 0x0400 #define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 #define IEEE80211_HT_CAP_DSSSCCK40 0x1000 -- cgit v1.2.2