From d94d93ca5cc36cd78c532def62772c98fe8ba5d7 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 10 Jul 2008 11:16:46 -0700 Subject: x64, x2apic/intr-remap: 8259 specific mask/unmask routines 8259 specific mask/unmask routines which be used later while enabling interrupt-remapping. Signed-off-by: Suresh Siddha Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar --- include/asm-x86/i8259.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/i8259.h b/include/asm-x86/i8259.h index 2f98df91f1f2..31112b6c595b 100644 --- a/include/asm-x86/i8259.h +++ b/include/asm-x86/i8259.h @@ -57,4 +57,7 @@ static inline void outb_pic(unsigned char value, unsigned int port) extern struct irq_chip i8259A_chip; +extern void mask_8259A(void); +extern void unmask_8259A(void); + #endif /* __ASM_I8259_H__ */ -- cgit v1.2.2 From 4dc2f96cacd1e74c688f94348a3bfd0a980817d5 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 10 Jul 2008 11:16:47 -0700 Subject: x64, x2apic/intr-remap: ioapic routines which deal with initial io-apic RTE setup Generic ioapic specific routines which be used later during enabling interrupt-remapping. Signed-off-by: Suresh Siddha Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar --- include/asm-x86/io_apic.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/io_apic.h b/include/asm-x86/io_apic.h index 14f82bbcb5fd..1c4a99d882f5 100644 --- a/include/asm-x86/io_apic.h +++ b/include/asm-x86/io_apic.h @@ -183,6 +183,12 @@ extern int io_apic_set_pci_routing(int ioapic, int pin, int irq, extern int (*ioapic_renumber_irq)(int ioapic, int irq); extern void ioapic_init_mappings(void); +#ifdef CONFIG_X86_64 +extern int save_mask_IO_APIC_setup(void); +extern void restore_IO_APIC_setup(void); +extern void reinit_intr_remapped_IO_APIC(int); +#endif + #else /* !CONFIG_X86_IO_APIC */ #define io_apic_assign_pci_irqs 0 static const int timer_through_8259 = 0; -- cgit v1.2.2 From 0c81c746f9bdbfaafe64322d540c8b7b59c27314 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 10 Jul 2008 11:16:48 -0700 Subject: x64, x2apic/intr-remap: introduce read_apic_id() to genapic routines Move the read_apic_id() to genapic routines. Signed-off-by: Suresh Siddha Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar --- include/asm-x86/genapic_64.h | 1 + include/asm-x86/mach-default/mach_apic.h | 1 + include/asm-x86/mach-default/mach_apicdef.h | 3 ++- include/asm-x86/smp.h | 4 +--- 4 files changed, 5 insertions(+), 4 deletions(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/genapic_64.h b/include/asm-x86/genapic_64.h index 647e4e5c2580..d567abc347a9 100644 --- a/include/asm-x86/genapic_64.h +++ b/include/asm-x86/genapic_64.h @@ -27,6 +27,7 @@ struct genapic { /* */ unsigned int (*cpu_mask_to_apicid)(cpumask_t cpumask); unsigned int (*phys_pkg_id)(int index_msb); + unsigned int (*read_apic_id)(void); }; extern struct genapic *genapic; diff --git a/include/asm-x86/mach-default/mach_apic.h b/include/asm-x86/mach-default/mach_apic.h index 0b2cde5e1b74..d172c554ab9f 100644 --- a/include/asm-x86/mach-default/mach_apic.h +++ b/include/asm-x86/mach-default/mach_apic.h @@ -30,6 +30,7 @@ static inline cpumask_t target_cpus(void) #define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid) #define phys_pkg_id (genapic->phys_pkg_id) #define vector_allocation_domain (genapic->vector_allocation_domain) +#define read_apic_id (genapic->read_apic_id) extern void setup_apic_routing(void); #else #define INT_DELIVERY_MODE dest_LowestPrio diff --git a/include/asm-x86/mach-default/mach_apicdef.h b/include/asm-x86/mach-default/mach_apicdef.h index e4b29ba37de6..453b58a67e29 100644 --- a/include/asm-x86/mach-default/mach_apicdef.h +++ b/include/asm-x86/mach-default/mach_apicdef.h @@ -5,8 +5,9 @@ #ifdef CONFIG_X86_64 #define APIC_ID_MASK (0xFFu<<24) -#define GET_APIC_ID(x) (((x)>>24)&0xFFu) +#define GET_APIC_ID(x) (x) #define SET_APIC_ID(x) (((x)<<24)) +#define GET_XAPIC_ID(x) (((x) >> 24) & 0xFFu) #else #define APIC_ID_MASK (0xF<<24) static inline unsigned get_apic_id(unsigned long x) diff --git a/include/asm-x86/smp.h b/include/asm-x86/smp.h index 2e221f1ce0b2..9848715fbd9e 100644 --- a/include/asm-x86/smp.h +++ b/include/asm-x86/smp.h @@ -169,12 +169,10 @@ static inline unsigned int read_apic_id(void) { return *(u32 *)(APIC_BASE + APIC_ID); } -#else -extern unsigned int read_apic_id(void); #endif -# ifdef APIC_DEFINITION +# if defined(APIC_DEFINITION) || defined(CONFIG_X86_64) extern int hard_smp_processor_id(void); # else # include -- cgit v1.2.2 From 1b374e4d6f8b3eb2fcd034fcc24ea8ba1dfde7aa Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 10 Jul 2008 11:16:49 -0700 Subject: x64, x2apic/intr-remap: basic apic ops support Introduce basic apic operations which handle the apic programming. This will be used later to introduce another specific operations for x2apic. For the perfomance critial accesses like IPI's, EOI etc, we use the native operations as they are already referenced by different indirections like genapic, irq_chip etc. 64bit Paravirt ops can also define their apic operations accordingly. Signed-off-by: Suresh Siddha Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar --- include/asm-x86/apic.h | 43 +++++++++++++++++++++++++++++++++++++------ include/asm-x86/ipi.h | 16 +++++++++++----- include/asm-x86/paravirt.h | 2 ++ include/asm-x86/smp.h | 2 +- 4 files changed, 51 insertions(+), 12 deletions(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/apic.h b/include/asm-x86/apic.h index 4e2c1e517f06..6fda195337c5 100644 --- a/include/asm-x86/apic.h +++ b/include/asm-x86/apic.h @@ -47,32 +47,59 @@ extern int disable_apic; #ifdef CONFIG_PARAVIRT #include #else -#define apic_write native_apic_write -#define apic_write_atomic native_apic_write_atomic -#define apic_read native_apic_read +#ifndef CONFIG_X86_64 +#define apic_write native_apic_mem_write +#define apic_write_atomic native_apic_mem_write_atomic +#define apic_read native_apic_mem_read +#endif #define setup_boot_clock setup_boot_APIC_clock #define setup_secondary_clock setup_secondary_APIC_clock #endif extern int is_vsmp_box(void); -static inline void native_apic_write(unsigned long reg, u32 v) +static inline void native_apic_mem_write(u32 reg, u32 v) { *((volatile u32 *)(APIC_BASE + reg)) = v; } -static inline void native_apic_write_atomic(unsigned long reg, u32 v) +static inline void native_apic_mem_write_atomic(u32 reg, u32 v) { (void)xchg((u32 *)(APIC_BASE + reg), v); } -static inline u32 native_apic_read(unsigned long reg) +static inline u32 native_apic_mem_read(u32 reg) { return *((volatile u32 *)(APIC_BASE + reg)); } +#ifdef CONFIG_X86_32 extern void apic_wait_icr_idle(void); extern u32 safe_apic_wait_icr_idle(void); +extern void apic_icr_write(u32 low, u32 id); +#else + +struct apic_ops { + u32 (*read)(u32 reg); + void (*write)(u32 reg, u32 v); + void (*write_atomic)(u32 reg, u32 v); + u64 (*icr_read)(void); + void (*icr_write)(u32 low, u32 high); + void (*wait_icr_idle)(void); + u32 (*safe_wait_icr_idle)(void); +}; + +extern struct apic_ops *apic_ops; + +#define apic_read (apic_ops->read) +#define apic_write (apic_ops->write) +#define apic_write_atomic (apic_ops->write_atomic) +#define apic_icr_read (apic_ops->icr_read) +#define apic_icr_write (apic_ops->icr_write) +#define apic_wait_icr_idle (apic_ops->wait_icr_idle) +#define safe_apic_wait_icr_idle (apic_ops->safe_wait_icr_idle) +#endif + extern int get_physical_broadcast(void); #ifdef CONFIG_X86_GOOD_APIC @@ -95,7 +122,11 @@ static inline void ack_APIC_irq(void) */ /* Docs say use 0 for future compatibility */ +#ifdef CONFIG_X86_32 apic_write_around(APIC_EOI, 0); +#else + native_apic_mem_write(APIC_EOI, 0); +#endif } extern int lapic_get_maxlvt(void); diff --git a/include/asm-x86/ipi.h b/include/asm-x86/ipi.h index 196d63c28aa4..3d8d6a6c1f8e 100644 --- a/include/asm-x86/ipi.h +++ b/include/asm-x86/ipi.h @@ -49,6 +49,12 @@ static inline int __prepare_ICR2(unsigned int mask) return SET_APIC_DEST_FIELD(mask); } +static inline void __xapic_wait_icr_idle(void) +{ + while (native_apic_mem_read(APIC_ICR) & APIC_ICR_BUSY) + cpu_relax(); +} + static inline void __send_IPI_shortcut(unsigned int shortcut, int vector, unsigned int dest) { @@ -64,7 +70,7 @@ static inline void __send_IPI_shortcut(unsigned int shortcut, int vector, /* * Wait for idle. */ - apic_wait_icr_idle(); + __xapic_wait_icr_idle(); /* * No need to touch the target chip field @@ -74,7 +80,7 @@ static inline void __send_IPI_shortcut(unsigned int shortcut, int vector, /* * Send the IPI. The write to APIC_ICR fires this off. */ - apic_write(APIC_ICR, cfg); + native_apic_mem_write(APIC_ICR, cfg); } /* @@ -92,13 +98,13 @@ static inline void __send_IPI_dest_field(unsigned int mask, int vector, if (unlikely(vector == NMI_VECTOR)) safe_apic_wait_icr_idle(); else - apic_wait_icr_idle(); + __xapic_wait_icr_idle(); /* * prepare target chip field */ cfg = __prepare_ICR2(mask); - apic_write(APIC_ICR2, cfg); + native_apic_mem_write(APIC_ICR2, cfg); /* * program the ICR @@ -108,7 +114,7 @@ static inline void __send_IPI_dest_field(unsigned int mask, int vector, /* * Send the IPI. The write to APIC_ICR fires this off. */ - apic_write(APIC_ICR, cfg); + native_apic_mem_write(APIC_ICR, cfg); } static inline void send_IPI_mask_sequence(cpumask_t mask, int vector) diff --git a/include/asm-x86/paravirt.h b/include/asm-x86/paravirt.h index ef5e8ec6a6ab..10adac02e6db 100644 --- a/include/asm-x86/paravirt.h +++ b/include/asm-x86/paravirt.h @@ -891,6 +891,7 @@ static inline void slow_down_io(void) /* * Basic functions accessing APICs. */ +#ifndef CONFIG_X86_64 static inline void apic_write(unsigned long reg, u32 v) { PVOP_VCALL2(pv_apic_ops.apic_write, reg, v); @@ -905,6 +906,7 @@ static inline u32 apic_read(unsigned long reg) { return PVOP_CALL1(unsigned long, pv_apic_ops.apic_read, reg); } +#endif static inline void setup_boot_clock(void) { diff --git a/include/asm-x86/smp.h b/include/asm-x86/smp.h index 9848715fbd9e..d9d007d22785 100644 --- a/include/asm-x86/smp.h +++ b/include/asm-x86/smp.h @@ -158,13 +158,13 @@ extern int safe_smp_processor_id(void); #ifdef CONFIG_X86_LOCAL_APIC +#ifndef CONFIG_X86_64 static inline int logical_smp_processor_id(void) { /* we don't want to mark this access volatile - bad code generation */ return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR)); } -#ifndef CONFIG_X86_64 static inline unsigned int read_apic_id(void) { return *(u32 *)(APIC_BASE + APIC_ID); -- cgit v1.2.2 From 32e1d0a0651004f5fe47f85a2a5c725ad579a90c Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 10 Jul 2008 11:16:50 -0700 Subject: x64, x2apic/intr-remap: cpuid bits for x2apic feature cpuid feature for x2apic. Signed-off-by: Suresh Siddha Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar --- include/asm-x86/cpufeature.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h index 75ef959db329..5be9510ee012 100644 --- a/include/asm-x86/cpufeature.h +++ b/include/asm-x86/cpufeature.h @@ -90,6 +90,7 @@ #define X86_FEATURE_CX16 (4*32+13) /* CMPXCHG16B */ #define X86_FEATURE_XTPR (4*32+14) /* Send Task Priority Messages */ #define X86_FEATURE_DCA (4*32+18) /* Direct Cache Access */ +#define X86_FEATURE_X2APIC (4*32+21) /* x2APIC */ /* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */ #define X86_FEATURE_XSTORE (5*32+ 2) /* on-CPU RNG present (xstore insn) */ @@ -188,6 +189,7 @@ extern const char * const x86_power_flags[32]; #define cpu_has_gbpages boot_cpu_has(X86_FEATURE_GBPAGES) #define cpu_has_arch_perfmon boot_cpu_has(X86_FEATURE_ARCH_PERFMON) #define cpu_has_pat boot_cpu_has(X86_FEATURE_PAT) +#define cpu_has_x2apic boot_cpu_has(X86_FEATURE_X2APIC) #if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64) # define cpu_has_invlpg 1 -- cgit v1.2.2 From 13c88fb58d0112d47f7839f24a755715c6218822 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 10 Jul 2008 11:16:52 -0700 Subject: x64, x2apic/intr-remap: x2apic ops for x2apic mode support x2apic ops for x2apic mode support. This uses MSR interface and differs slightly from the xapic register layout. Signed-off-by: Suresh Siddha Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar --- include/asm-x86/apic.h | 22 ++++++++++++++++++++++ include/asm-x86/apicdef.h | 3 +++ 2 files changed, 25 insertions(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/apic.h b/include/asm-x86/apic.h index 6fda195337c5..bb54928373ca 100644 --- a/include/asm-x86/apic.h +++ b/include/asm-x86/apic.h @@ -7,6 +7,8 @@ #include #include #include +#include +#include #define ARCH_APICTIMER_STOPS_ON_C3 1 @@ -73,6 +75,26 @@ static inline u32 native_apic_mem_read(u32 reg) return *((volatile u32 *)(APIC_BASE + reg)); } +static inline void native_apic_msr_write(u32 reg, u32 v) +{ + if (reg == APIC_DFR || reg == APIC_ID || reg == APIC_LDR || + reg == APIC_LVR) + return; + + wrmsr(APIC_BASE_MSR + (reg >> 4), v, 0); +} + +static inline u32 native_apic_msr_read(u32 reg) +{ + u32 low, high; + + if (reg == APIC_DFR) + return -1; + + rdmsr(APIC_BASE_MSR + (reg >> 4), low, high); + return low; +} + #ifdef CONFIG_X86_32 extern void apic_wait_icr_idle(void); extern u32 safe_apic_wait_icr_idle(void); diff --git a/include/asm-x86/apicdef.h b/include/asm-x86/apicdef.h index 6b9008c78731..bcae297b30b2 100644 --- a/include/asm-x86/apicdef.h +++ b/include/asm-x86/apicdef.h @@ -105,6 +105,7 @@ #define APIC_TMICT 0x380 #define APIC_TMCCT 0x390 #define APIC_TDCR 0x3E0 +#define APIC_SELF_IPI 0x3F0 #define APIC_TDR_DIV_TMBASE (1 << 2) #define APIC_TDR_DIV_1 0xB #define APIC_TDR_DIV_2 0x0 @@ -128,6 +129,8 @@ #define APIC_EILVT3 0x530 #define APIC_BASE (fix_to_virt(FIX_APIC_BASE)) +#define APIC_BASE_MSR 0x800 +#define X2APIC_ENABLE (1UL << 10) #ifdef CONFIG_X86_32 # define MAX_IO_APICS 64 -- cgit v1.2.2 From cff73a6ffaed726780b001937d2a42efde553922 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 10 Jul 2008 11:16:53 -0700 Subject: x64, x2apic/intr-remap: introcude self IPI to genapic routines Introduce self IPI op for genapic. Signed-off-by: Suresh Siddha Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar --- include/asm-x86/genapic_64.h | 2 ++ include/asm-x86/hw_irq.h | 2 ++ include/asm-x86/mach-default/mach_apic.h | 1 + 3 files changed, 5 insertions(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/genapic_64.h b/include/asm-x86/genapic_64.h index d567abc347a9..6777d71aabc9 100644 --- a/include/asm-x86/genapic_64.h +++ b/include/asm-x86/genapic_64.h @@ -24,6 +24,7 @@ struct genapic { void (*send_IPI_mask)(cpumask_t mask, int vector); void (*send_IPI_allbutself)(int vector); void (*send_IPI_all)(int vector); + void (*send_IPI_self)(int vector); /* */ unsigned int (*cpu_mask_to_apicid)(cpumask_t cpumask); unsigned int (*phys_pkg_id)(int index_msb); @@ -36,6 +37,7 @@ extern struct genapic apic_flat; extern struct genapic apic_physflat; extern int acpi_madt_oem_check(char *, char *); +extern void apic_send_IPI_self(int vector); enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC}; extern enum uv_system_type get_uv_system_type(void); extern int is_uv_system(void); diff --git a/include/asm-x86/hw_irq.h b/include/asm-x86/hw_irq.h index 18f067c310f7..2ae47e7c1063 100644 --- a/include/asm-x86/hw_irq.h +++ b/include/asm-x86/hw_irq.h @@ -72,7 +72,9 @@ extern void enable_IO_APIC(void); #endif /* IPI functions */ +#ifdef CONFIG_X86_32 extern void send_IPI_self(int vector); +#endif extern void send_IPI(int dest, int vector); /* Statistics */ diff --git a/include/asm-x86/mach-default/mach_apic.h b/include/asm-x86/mach-default/mach_apic.h index d172c554ab9f..e06d23975d6a 100644 --- a/include/asm-x86/mach-default/mach_apic.h +++ b/include/asm-x86/mach-default/mach_apic.h @@ -31,6 +31,7 @@ static inline cpumask_t target_cpus(void) #define phys_pkg_id (genapic->phys_pkg_id) #define vector_allocation_domain (genapic->vector_allocation_domain) #define read_apic_id (genapic->read_apic_id) +#define send_IPI_self (genapic->send_IPI_self) extern void setup_apic_routing(void); #else #define INT_DELIVERY_MODE dest_LowestPrio -- cgit v1.2.2 From 12a67cf6851871ca8df42025c94f140c303d0f7f Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 10 Jul 2008 11:16:54 -0700 Subject: x64, x2apic/intr-remap: x2apic cluster mode support x2apic cluster mode support. Signed-off-by: Suresh Siddha Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar --- include/asm-x86/genapic_64.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/genapic_64.h b/include/asm-x86/genapic_64.h index 6777d71aabc9..232460305877 100644 --- a/include/asm-x86/genapic_64.h +++ b/include/asm-x86/genapic_64.h @@ -35,6 +35,7 @@ extern struct genapic *genapic; extern struct genapic apic_flat; extern struct genapic apic_physflat; +extern struct genapic apic_x2apic_cluster; extern int acpi_madt_oem_check(char *, char *); extern void apic_send_IPI_self(int vector); -- cgit v1.2.2 From 89027d35aa5b8f45ce0f7fa0911db85b46563da0 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 10 Jul 2008 11:16:56 -0700 Subject: x64, x2apic/intr-remap: IO-APIC support for interrupt-remapping IO-APIC support in the presence of interrupt-remapping infrastructure. IO-APIC RTE will be programmed with interrupt-remapping table entry(IRTE) index and the IRTE will contain information about the vector, cpu destination, trigger mode etc, which traditionally was present in the IO-APIC RTE. Introduce a new irq_chip for cleaner irq migration (in the process context as opposed to the current irq migration in the context of an interrupt. interrupt-remapping infrastructure will help us achieve this cleanly). For edge triggered, irq migration is a simple atomic update(of vector and cpu destination) of IRTE and flush the hardware cache. For level triggered, we need to modify the io-apic RTE aswell with the update vector information, along with modifying IRTE with vector and cpu destination. So irq migration for level triggered is little bit more complex compared to edge triggered migration. But the good news is, we use the same algorithm for level triggered migration as we have today, only difference being, we now initiate the irq migration from process context instead of the interrupt context. In future, when we do a directed EOI (combined with cpu EOI broadcast suppression) to the IO-APIC, level triggered irq migration will also be as simple as edge triggered migration and we can do the irq migration with a simple atomic update to IO-APIC RTE. TBD: some tests/changes needed in the presence of fixup_irqs() for level triggered irq migration. Signed-off-by: Suresh Siddha Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar --- include/asm-x86/apic.h | 9 +++++++++ include/asm-x86/io_apic.h | 14 ++++++++++++++ include/asm-x86/irq_remapping.h | 8 ++++++++ 3 files changed, 31 insertions(+) create mode 100644 include/asm-x86/irq_remapping.h (limited to 'include/asm-x86') diff --git a/include/asm-x86/apic.h b/include/asm-x86/apic.h index bb54928373ca..aa746704a5c9 100644 --- a/include/asm-x86/apic.h +++ b/include/asm-x86/apic.h @@ -134,6 +134,15 @@ extern int get_physical_broadcast(void); # define apic_write_around(x, y) apic_write_atomic((x), (y)) #endif +#ifdef CONFIG_X86_64 +static inline void ack_x2APIC_irq(void) +{ + /* Docs say use 0 for future compatibility */ + native_apic_msr_write(APIC_EOI, 0); +} +#endif + + static inline void ack_APIC_irq(void) { /* diff --git a/include/asm-x86/io_apic.h b/include/asm-x86/io_apic.h index 1c4a99d882f5..8dc2622714c8 100644 --- a/include/asm-x86/io_apic.h +++ b/include/asm-x86/io_apic.h @@ -107,6 +107,20 @@ struct IO_APIC_route_entry { } __attribute__ ((packed)); +struct IR_IO_APIC_route_entry { + __u64 vector : 8, + zero : 3, + index2 : 1, + delivery_status : 1, + polarity : 1, + irr : 1, + trigger : 1, + mask : 1, + reserved : 31, + format : 1, + index : 15; +} __attribute__ ((packed)); + #ifdef CONFIG_X86_IO_APIC /* diff --git a/include/asm-x86/irq_remapping.h b/include/asm-x86/irq_remapping.h new file mode 100644 index 000000000000..78242c6ffa58 --- /dev/null +++ b/include/asm-x86/irq_remapping.h @@ -0,0 +1,8 @@ +#ifndef _ASM_IRQ_REMAPPING_H +#define _ASM_IRQ_REMAPPING_H + +extern int x2apic; + +#define IRTE_DEST(dest) ((x2apic) ? dest : dest << 8) + +#endif -- cgit v1.2.2 From 75c46fa61bc5b4ccd20a168ff325c58771248fcd Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 10 Jul 2008 11:16:57 -0700 Subject: x64, x2apic/intr-remap: MSI and MSI-X support for interrupt remapping infrastructure MSI and MSI-X support for interrupt remapping infrastructure. MSI address register will be programmed with interrupt-remapping table entry(IRTE) index and the IRTE will contain information about the vector, cpu destination, etc. For MSI-X, all the IRTE's will be consecutively allocated in the table, and the address registers will contain the starting index to the block and the data register will contain the subindex with in that block. This also introduces a new irq_chip for cleaner irq migration (in the process context as opposed to the current irq migration in the context of an interrupt. interrupt-remapping infrastructure will help us achieve this). As MSI is edge triggered, irq migration is a simple atomic update(of vector and cpu destination) of IRTE and flushing the hardware cache. Signed-off-by: Suresh Siddha Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar --- include/asm-x86/msidef.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/msidef.h b/include/asm-x86/msidef.h index 296f29ce426d..57fd85935e5a 100644 --- a/include/asm-x86/msidef.h +++ b/include/asm-x86/msidef.h @@ -48,4 +48,8 @@ #define MSI_ADDR_DEST_ID(dest) (((dest) << MSI_ADDR_DEST_ID_SHIFT) & \ MSI_ADDR_DEST_ID_MASK) +#define MSI_ADDR_IR_EXT_INT (1 << 4) +#define MSI_ADDR_IR_SHV (1 << 3) +#define MSI_ADDR_IR_INDEX1(index) ((index & 0x8000) >> 13) +#define MSI_ADDR_IR_INDEX2(index) ((index & 0x7fff) << 5) #endif /* ASM_MSIDEF_H */ -- cgit v1.2.2 From 6e1cb38a2aef7680975e71f23de187859ee8b158 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 10 Jul 2008 11:16:58 -0700 Subject: x64, x2apic/intr-remap: add x2apic support, including enabling interrupt-remapping x2apic support. Interrupt-remapping must be enabled before enabling x2apic, this is needed to ensure that IO interrupts continue to work properly after the cpu mode is changed to x2apic(which uses 32bit extended physical/cluster apic id). On systems where apicid's are > 255, BIOS can handover the control to OS in x2apic mode. Or if the OS handover was in legacy xapic mode, check if it is capable of x2apic mode. And if we succeed in enabling Interrupt-remapping, then we can enable x2apic mode in the CPU. Signed-off-by: Suresh Siddha Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar --- include/asm-x86/apic.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/apic.h b/include/asm-x86/apic.h index aa746704a5c9..129752dd2525 100644 --- a/include/asm-x86/apic.h +++ b/include/asm-x86/apic.h @@ -100,6 +100,11 @@ extern void apic_wait_icr_idle(void); extern u32 safe_apic_wait_icr_idle(void); extern void apic_icr_write(u32 low, u32 id); #else +extern int x2apic, x2apic_preenabled; +extern void check_x2apic(void); +extern void enable_x2apic(void); +extern void enable_IR_x2apic(void); +extern void x2apic_icr_write(u32 low, u32 id); struct apic_ops { u32 (*read)(u32 reg); -- cgit v1.2.2 From 2d9579a124d746a3e0e0ba45e57d80800ee80807 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 10 Jul 2008 11:16:59 -0700 Subject: x64, x2apic/intr-remap: support for x2apic physical mode support x2apic Physical mode support. By default we will use x2apic cluster mode. x2apic physical mode can be selected using "x2apic_phys" boot parameter. Signed-off-by: Suresh Siddha Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar --- include/asm-x86/genapic_64.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/genapic_64.h b/include/asm-x86/genapic_64.h index 232460305877..122b9242a40f 100644 --- a/include/asm-x86/genapic_64.h +++ b/include/asm-x86/genapic_64.h @@ -36,6 +36,7 @@ extern struct genapic *genapic; extern struct genapic apic_flat; extern struct genapic apic_physflat; extern struct genapic apic_x2apic_cluster; +extern struct genapic apic_x2apic_phys; extern int acpi_madt_oem_check(char *, char *); extern void apic_send_IPI_self(int vector); -- cgit v1.2.2 From ad66dd340f561bdde2285992314d9e4fd9b6191e Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Fri, 11 Jul 2008 13:11:56 -0700 Subject: x2apic: xen64 paravirt basic apic ops Define the Xen specific basic apic ops, in additon to paravirt apic ops, with some misc warning fixes. Signed-off-by: Suresh Siddha Cc: Jeremy Fitzhardinge Cc: akpm@linux-foundation.org Signed-off-by: Ingo Molnar --- include/asm-x86/paravirt.h | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/paravirt.h b/include/asm-x86/paravirt.h index 10adac02e6db..5e34d26aa3b5 100644 --- a/include/asm-x86/paravirt.h +++ b/include/asm-x86/paravirt.h @@ -200,13 +200,15 @@ struct pv_irq_ops { struct pv_apic_ops { #ifdef CONFIG_X86_LOCAL_APIC +#ifndef CONFIG_X86_64 /* * Direct APIC operations, principally for VMI. Ideally * these shouldn't be in this interface. */ - void (*apic_write)(unsigned long reg, u32 v); - void (*apic_write_atomic)(unsigned long reg, u32 v); - u32 (*apic_read)(unsigned long reg); + void (*apic_write)(u32 reg, u32 v); + void (*apic_write_atomic)(u32 reg, u32 v); + u32 (*apic_read)(u32 reg); +#endif void (*setup_boot_clock)(void); void (*setup_secondary_clock)(void); @@ -892,17 +894,17 @@ static inline void slow_down_io(void) * Basic functions accessing APICs. */ #ifndef CONFIG_X86_64 -static inline void apic_write(unsigned long reg, u32 v) +static inline void apic_write(u32 reg, u32 v) { PVOP_VCALL2(pv_apic_ops.apic_write, reg, v); } -static inline void apic_write_atomic(unsigned long reg, u32 v) +static inline void apic_write_atomic(u32 reg, u32 v) { PVOP_VCALL2(pv_apic_ops.apic_write_atomic, reg, v); } -static inline u32 apic_read(unsigned long reg) +static inline u32 apic_read(u32 reg) { return PVOP_CALL1(unsigned long, pv_apic_ops.apic_read, reg); } -- cgit v1.2.2 From c535b6a1a685eb23f96e2c221777d6c1e05080d5 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 11 Jul 2008 18:41:54 -0700 Subject: x86: let 32bit use apic_ops too Signed-off-by: Yinghai Lu Cc: Suresh Siddha Signed-off-by: Ingo Molnar --- include/asm-x86/apic.h | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/apic.h b/include/asm-x86/apic.h index 129752dd2525..fcd2f01277b6 100644 --- a/include/asm-x86/apic.h +++ b/include/asm-x86/apic.h @@ -49,11 +49,6 @@ extern int disable_apic; #ifdef CONFIG_PARAVIRT #include #else -#ifndef CONFIG_X86_64 -#define apic_write native_apic_mem_write -#define apic_write_atomic native_apic_mem_write_atomic -#define apic_read native_apic_mem_read -#endif #define setup_boot_clock setup_boot_APIC_clock #define setup_secondary_clock setup_secondary_APIC_clock #endif @@ -95,16 +90,13 @@ static inline u32 native_apic_msr_read(u32 reg) return low; } -#ifdef CONFIG_X86_32 -extern void apic_wait_icr_idle(void); -extern u32 safe_apic_wait_icr_idle(void); -extern void apic_icr_write(u32 low, u32 id); -#else +#ifndef CONFIG_X86_32 extern int x2apic, x2apic_preenabled; extern void check_x2apic(void); extern void enable_x2apic(void); extern void enable_IR_x2apic(void); extern void x2apic_icr_write(u32 low, u32 id); +#endif struct apic_ops { u32 (*read)(u32 reg); @@ -125,7 +117,6 @@ extern struct apic_ops *apic_ops; #define apic_icr_write (apic_ops->icr_write) #define apic_wait_icr_idle (apic_ops->wait_icr_idle) #define safe_apic_wait_icr_idle (apic_ops->safe_wait_icr_idle) -#endif extern int get_physical_broadcast(void); -- cgit v1.2.2 From 4c9961d56ec20c27ec5d02e49fd7427748312741 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 11 Jul 2008 18:44:16 -0700 Subject: x86: make read_apic_id return final apicid also remove GET_APIC_ID when read_apic_id is used. need to apply after [PATCH] x86: mach_apicdef.h need to include before smp.h Signed-off-by: Yinghai Lu Cc: Suresh Siddha Signed-off-by: Ingo Molnar --- include/asm-x86/mach-default/mach_apic.h | 2 +- include/asm-x86/mach-default/mach_apicdef.h | 3 +-- include/asm-x86/mach-es7000/mach_apic.h | 2 +- include/asm-x86/smp.h | 11 ++++++++--- 4 files changed, 11 insertions(+), 7 deletions(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/mach-default/mach_apic.h b/include/asm-x86/mach-default/mach_apic.h index e06d23975d6a..925b797e2a26 100644 --- a/include/asm-x86/mach-default/mach_apic.h +++ b/include/asm-x86/mach-default/mach_apic.h @@ -56,7 +56,7 @@ static inline void init_apic_ldr(void) static inline int apic_id_registered(void) { - return physid_isset(GET_APIC_ID(read_apic_id()), phys_cpu_present_map); + return physid_isset(read_apic_id(), phys_cpu_present_map); } static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask) diff --git a/include/asm-x86/mach-default/mach_apicdef.h b/include/asm-x86/mach-default/mach_apicdef.h index 453b58a67e29..3e1be6c99b35 100644 --- a/include/asm-x86/mach-default/mach_apicdef.h +++ b/include/asm-x86/mach-default/mach_apicdef.h @@ -5,9 +5,8 @@ #ifdef CONFIG_X86_64 #define APIC_ID_MASK (0xFFu<<24) -#define GET_APIC_ID(x) (x) +#define GET_APIC_ID(x) (((x)>>24) & 0xFFu) #define SET_APIC_ID(x) (((x)<<24)) -#define GET_XAPIC_ID(x) (((x) >> 24) & 0xFFu) #else #define APIC_ID_MASK (0xF<<24) static inline unsigned get_apic_id(unsigned long x) diff --git a/include/asm-x86/mach-es7000/mach_apic.h b/include/asm-x86/mach-es7000/mach_apic.h index fbc8ad256f5a..b3556ec3bca5 100644 --- a/include/asm-x86/mach-es7000/mach_apic.h +++ b/include/asm-x86/mach-es7000/mach_apic.h @@ -141,7 +141,7 @@ static inline void setup_portio_remap(void) extern unsigned int boot_cpu_physical_apicid; static inline int check_phys_apicid_present(int cpu_physical_apicid) { - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); + boot_cpu_physical_apicid = read_apic_id(); return (1); } diff --git a/include/asm-x86/smp.h b/include/asm-x86/smp.h index d9d007d22785..3b43ca202c3b 100644 --- a/include/asm-x86/smp.h +++ b/include/asm-x86/smp.h @@ -165,9 +165,14 @@ static inline int logical_smp_processor_id(void) return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR)); } +#include static inline unsigned int read_apic_id(void) { - return *(u32 *)(APIC_BASE + APIC_ID); + unsigned int reg; + + reg = *(u32 *)(APIC_BASE + APIC_ID); + + return GET_APIC_ID(reg); } #endif @@ -175,11 +180,11 @@ static inline unsigned int read_apic_id(void) # if defined(APIC_DEFINITION) || defined(CONFIG_X86_64) extern int hard_smp_processor_id(void); # else -# include +#include static inline int hard_smp_processor_id(void) { /* we don't want to mark this access volatile - bad code generation */ - return GET_APIC_ID(read_apic_id()); + return read_apic_id(); } # endif /* APIC_DEFINITION */ -- cgit v1.2.2 From f910a9dc7c865896815e2a95fe33363e9522f277 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 12 Jul 2008 01:01:20 -0700 Subject: x86: make 64bit have get_apic_id generalize the x2apic code some more. let read_apic_id become a macro (later on a function/inline) GET_APIC_ID(apic_read(APIC_ID)) +#define read_apic_id() (GET_APIC_ID(apic_read(APIC_ID))) instead of this weird construct: -#define read_apic_id (genapic->read_apic_id) Signed-off-by: Yinghai Lu Cc: Suresh Siddha Signed-off-by: Ingo Molnar --- include/asm-x86/genapic_64.h | 4 +++- include/asm-x86/mach-default/mach_apic.h | 2 +- include/asm-x86/mach-default/mach_apicdef.h | 6 +++--- 3 files changed, 7 insertions(+), 5 deletions(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/genapic_64.h b/include/asm-x86/genapic_64.h index 122b9242a40f..8ff2589da93b 100644 --- a/include/asm-x86/genapic_64.h +++ b/include/asm-x86/genapic_64.h @@ -28,7 +28,9 @@ struct genapic { /* */ unsigned int (*cpu_mask_to_apicid)(cpumask_t cpumask); unsigned int (*phys_pkg_id)(int index_msb); - unsigned int (*read_apic_id)(void); + unsigned int (*get_apic_id)(unsigned long x); + unsigned long (*set_apic_id)(unsigned int id); + unsigned long apic_id_mask; }; extern struct genapic *genapic; diff --git a/include/asm-x86/mach-default/mach_apic.h b/include/asm-x86/mach-default/mach_apic.h index 925b797e2a26..3d2b455581ec 100644 --- a/include/asm-x86/mach-default/mach_apic.h +++ b/include/asm-x86/mach-default/mach_apic.h @@ -30,7 +30,7 @@ static inline cpumask_t target_cpus(void) #define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid) #define phys_pkg_id (genapic->phys_pkg_id) #define vector_allocation_domain (genapic->vector_allocation_domain) -#define read_apic_id (genapic->read_apic_id) +#define read_apic_id() (GET_APIC_ID(apic_read(APIC_ID))) #define send_IPI_self (genapic->send_IPI_self) extern void setup_apic_routing(void); #else diff --git a/include/asm-x86/mach-default/mach_apicdef.h b/include/asm-x86/mach-default/mach_apicdef.h index 3e1be6c99b35..a55518aa5a2d 100644 --- a/include/asm-x86/mach-default/mach_apicdef.h +++ b/include/asm-x86/mach-default/mach_apicdef.h @@ -4,9 +4,9 @@ #include #ifdef CONFIG_X86_64 -#define APIC_ID_MASK (0xFFu<<24) -#define GET_APIC_ID(x) (((x)>>24) & 0xFFu) -#define SET_APIC_ID(x) (((x)<<24)) +#define APIC_ID_MASK (genapic->apic_id_mask) +#define GET_APIC_ID(x) (genapic->get_apic_id(x)) +#define SET_APIC_ID(x) (genapic->set_apic_id(x)) #else #define APIC_ID_MASK (0xF<<24) static inline unsigned get_apic_id(unsigned long x) -- cgit v1.2.2 From 94a8c3c2437c8946f1b6c8e0b2c560a7db8ed3c6 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 13 Jul 2008 22:19:35 -0700 Subject: x86: let 32bit use apic_ops too - fix fix for pv - clean up the namespace there too. Signed-off-by: Yinghai Lu Cc: Suresh Siddha Signed-off-by: Ingo Molnar --- include/asm-x86/paravirt.h | 29 ----------------------------- 1 file changed, 29 deletions(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/paravirt.h b/include/asm-x86/paravirt.h index 5e34d26aa3b5..08f89e385a92 100644 --- a/include/asm-x86/paravirt.h +++ b/include/asm-x86/paravirt.h @@ -200,15 +200,6 @@ struct pv_irq_ops { struct pv_apic_ops { #ifdef CONFIG_X86_LOCAL_APIC -#ifndef CONFIG_X86_64 - /* - * Direct APIC operations, principally for VMI. Ideally - * these shouldn't be in this interface. - */ - void (*apic_write)(u32 reg, u32 v); - void (*apic_write_atomic)(u32 reg, u32 v); - u32 (*apic_read)(u32 reg); -#endif void (*setup_boot_clock)(void); void (*setup_secondary_clock)(void); @@ -890,26 +881,6 @@ static inline void slow_down_io(void) } #ifdef CONFIG_X86_LOCAL_APIC -/* - * Basic functions accessing APICs. - */ -#ifndef CONFIG_X86_64 -static inline void apic_write(u32 reg, u32 v) -{ - PVOP_VCALL2(pv_apic_ops.apic_write, reg, v); -} - -static inline void apic_write_atomic(u32 reg, u32 v) -{ - PVOP_VCALL2(pv_apic_ops.apic_write_atomic, reg, v); -} - -static inline u32 apic_read(u32 reg) -{ - return PVOP_CALL1(unsigned long, pv_apic_ops.apic_read, reg); -} -#endif - static inline void setup_boot_clock(void) { PVOP_VCALL0(pv_apic_ops.setup_boot_clock); -- cgit v1.2.2 From 1b9b89e7f163336ad84200b66a17284dbf26aced Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 21 Jul 2008 22:08:21 -0700 Subject: x86: add apic probe for genapic 64bit, v2 introducing an APIC handling probing abstraction: static struct genapic *apic_probe[] __initdata = { &apic_x2apic_uv_x, &apic_x2apic_phys, &apic_x2apic_cluster, &apic_physflat, NULL, }; This way we can remove UV, x2apic specific code from genapic_64.c and move them to their specific genapic files. [ v2: fix compiling when CONFIG_ACPI is not set ] Signed-off-by: Yinghai Lu Cc: Jack Steiner Cc: Suresh Siddha Signed-off-by: Ingo Molnar --- include/asm-x86/genapic_64.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/genapic_64.h b/include/asm-x86/genapic_64.h index 2871b3fccb21..1e832e49f54e 100644 --- a/include/asm-x86/genapic_64.h +++ b/include/asm-x86/genapic_64.h @@ -14,6 +14,7 @@ struct genapic { char *name; + int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id); u32 int_delivery_mode; u32 int_dest_mode; int (*apic_id_registered)(void); -- cgit v1.2.2 From 026e2c05ef58ef413e2d52696f125d5ea1aa8bce Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 22 Jul 2008 11:58:14 +0200 Subject: x86, cyrix: debug Signed-off-by: Ingo Molnar --- include/asm-x86/processor-cyrix.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/processor-cyrix.h b/include/asm-x86/processor-cyrix.h index 97568ada1f97..1198f2a0e42c 100644 --- a/include/asm-x86/processor-cyrix.h +++ b/include/asm-x86/processor-cyrix.h @@ -28,3 +28,11 @@ static inline void setCx86(u8 reg, u8 data) outb(reg, 0x22); outb(data, 0x23); } + +#define getCx86_old(reg) ({ outb((reg), 0x22); inb(0x23); }) + +#define setCx86_old(reg, data) do { \ + outb((reg), 0x22); \ + outb((data), 0x23); \ +} while (0) + -- cgit v1.2.2 From df1be4372eae5f104b7fb4991bc4b35f00b11a11 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Tue, 22 Jul 2008 10:13:11 -0400 Subject: x64, apic: use generic apic_write() for ack_APIC_irq() I tested tip/master and found an issue (patch attached) for x2apic support. This is not because of the recent merges we had, but because of something(where we still access memory based interface after enabling x2apic mode) that slipped through my earlier tests. Probably it is a good idea to unmap the memory mapped interface, once we switch to x2apic mode. That will catch the issues much earlier. I will post another patch for this. ack_APIC_irq() is used at too many generic places (and not just during irq_chip handling!) to use the native_apic_mem_write(). For ex, this will break x2apic based systems. Fix ack_APIC_irq() to use the generic apic_write() even for 64-bit. Signed-off-by: Suresh Siddha Cc: suresh.b.siddha@intel.com Cc: yong.y.wang@linux.intel.com Signed-off-by: Ingo Molnar --- include/asm-x86/apic.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/apic.h b/include/asm-x86/apic.h index 51339910fdc0..502ca6594b1d 100644 --- a/include/asm-x86/apic.h +++ b/include/asm-x86/apic.h @@ -136,11 +136,7 @@ static inline void ack_APIC_irq(void) */ /* Docs say use 0 for future compatibility */ -#ifdef CONFIG_X86_32 apic_write(APIC_EOI, 0); -#else - native_apic_mem_write(APIC_EOI, 0); -#endif } extern int lapic_get_maxlvt(void); -- cgit v1.2.2 From 32f71aff77b6470d272f80ac28f43f9601c4d140 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 21 Jul 2008 00:52:49 +0100 Subject: x86: PIC, L-APIC and I/O APIC debug information Dump all the PIC, local APIC and I/O APIC information at the fs_initcall() level, which is after ACPI (if used) has initialised PCI information, making the point of invocation consistent across MP-table and ACPI platforms. Remove explicit calls to print_IO_APIC() from elsewhere. Make the interface of all the functions involved consistent between 32-bit and 64-bit versions and make them all static by default by the means of a New-and-Improved(TM) __apicdebuginit() macro. Note that like print_IO_APIC() all these only output anything if "apic=debug" has been passed to the kernel through the command line. Signed-off-by: Maciej W. Rozycki Cc: Chuck Ebbert Signed-off-by: Ingo Molnar --- include/asm-x86/hw_irq.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/hw_irq.h b/include/asm-x86/hw_irq.h index 77ba51df5668..83e0048dca78 100644 --- a/include/asm-x86/hw_irq.h +++ b/include/asm-x86/hw_irq.h @@ -64,7 +64,6 @@ extern unsigned long io_apic_irqs; extern void init_VISWS_APIC_irqs(void); extern void setup_IO_APIC(void); extern void disable_IO_APIC(void); -extern void print_IO_APIC(void); extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn); extern void setup_ioapic_dest(void); -- cgit v1.2.2 From a4dbc34d181e87a0d724dee365921e9251f831d4 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 25 Jul 2008 02:14:28 -0700 Subject: x86: add setup_ioapic_ids for numaq in x86_quirks Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- include/asm-x86/setup.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/setup.h b/include/asm-x86/setup.h index b7aeba94e430..80fcc0de80be 100644 --- a/include/asm-x86/setup.h +++ b/include/asm-x86/setup.h @@ -38,6 +38,7 @@ struct x86_quirks { void (*mpc_oem_pci_bus)(struct mpc_config_bus *m); void (*smp_read_mpc_oem)(struct mp_config_oemtable *oemtable, unsigned short oemsize); + int (*setup_ioapic_ids)(void); }; extern struct x86_quirks *x86_quirks; -- cgit v1.2.2 From 1176fa919292887aa738d317d61fe2bba4d764f2 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 25 Jul 2008 02:17:21 -0700 Subject: x86: mach-bigsmp to bigsmp Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- include/asm-x86/bigsmp/apic.h | 144 +++++++++++++++++++++++++++++ include/asm-x86/bigsmp/apicdef.h | 13 +++ include/asm-x86/bigsmp/ipi.h | 25 +++++ include/asm-x86/mach-bigsmp/mach_apic.h | 144 ----------------------------- include/asm-x86/mach-bigsmp/mach_apicdef.h | 13 --- include/asm-x86/mach-bigsmp/mach_ipi.h | 25 ----- 6 files changed, 182 insertions(+), 182 deletions(-) create mode 100644 include/asm-x86/bigsmp/apic.h create mode 100644 include/asm-x86/bigsmp/apicdef.h create mode 100644 include/asm-x86/bigsmp/ipi.h delete mode 100644 include/asm-x86/mach-bigsmp/mach_apic.h delete mode 100644 include/asm-x86/mach-bigsmp/mach_apicdef.h delete mode 100644 include/asm-x86/mach-bigsmp/mach_ipi.h (limited to 'include/asm-x86') diff --git a/include/asm-x86/bigsmp/apic.h b/include/asm-x86/bigsmp/apic.h new file mode 100644 index 000000000000..0a9cd7c5ca0c --- /dev/null +++ b/include/asm-x86/bigsmp/apic.h @@ -0,0 +1,144 @@ +#ifndef __ASM_MACH_APIC_H +#define __ASM_MACH_APIC_H + +#define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu)) +#define esr_disable (1) + +static inline int apic_id_registered(void) +{ + return (1); +} + +/* Round robin the irqs amoung the online cpus */ +static inline cpumask_t target_cpus(void) +{ + static unsigned long cpu = NR_CPUS; + do { + if (cpu >= NR_CPUS) + cpu = first_cpu(cpu_online_map); + else + cpu = next_cpu(cpu, cpu_online_map); + } while (cpu >= NR_CPUS); + return cpumask_of_cpu(cpu); +} + +#undef APIC_DEST_LOGICAL +#define APIC_DEST_LOGICAL 0 +#define TARGET_CPUS (target_cpus()) +#define APIC_DFR_VALUE (APIC_DFR_FLAT) +#define INT_DELIVERY_MODE (dest_Fixed) +#define INT_DEST_MODE (0) /* phys delivery to target proc */ +#define NO_BALANCE_IRQ (0) +#define WAKE_SECONDARY_VIA_INIT + + +static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid) +{ + return (0); +} + +static inline unsigned long check_apicid_present(int bit) +{ + return (1); +} + +static inline unsigned long calculate_ldr(int cpu) +{ + unsigned long val, id; + val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; + id = xapic_phys_to_log_apicid(cpu); + val |= SET_APIC_LOGICAL_ID(id); + return val; +} + +/* + * Set up the logical destination ID. + * + * Intel recommends to set DFR, LDR and TPR before enabling + * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel + * document number 292116). So here it goes... + */ +static inline void init_apic_ldr(void) +{ + unsigned long val; + int cpu = smp_processor_id(); + + apic_write(APIC_DFR, APIC_DFR_VALUE); + val = calculate_ldr(cpu); + apic_write(APIC_LDR, val); +} + +static inline void setup_apic_routing(void) +{ + printk("Enabling APIC mode: %s. Using %d I/O APICs\n", + "Physflat", nr_ioapics); +} + +static inline int multi_timer_check(int apic, int irq) +{ + return (0); +} + +static inline int apicid_to_node(int logical_apicid) +{ + return apicid_2_node[hard_smp_processor_id()]; +} + +static inline int cpu_present_to_apicid(int mps_cpu) +{ + if (mps_cpu < NR_CPUS) + return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu); + + return BAD_APICID; +} + +static inline physid_mask_t apicid_to_cpu_present(int phys_apicid) +{ + return physid_mask_of_physid(phys_apicid); +} + +extern u8 cpu_2_logical_apicid[]; +/* Mapping from cpu number to logical apicid */ +static inline int cpu_to_logical_apicid(int cpu) +{ + if (cpu >= NR_CPUS) + return BAD_APICID; + return cpu_physical_id(cpu); +} + +static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map) +{ + /* For clustered we don't have a good way to do this yet - hack */ + return physids_promote(0xFFL); +} + +static inline void setup_portio_remap(void) +{ +} + +static inline void enable_apic_mode(void) +{ +} + +static inline int check_phys_apicid_present(int boot_cpu_physical_apicid) +{ + return (1); +} + +/* As we are using single CPU as destination, pick only one CPU here */ +static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask) +{ + int cpu; + int apicid; + + cpu = first_cpu(cpumask); + apicid = cpu_to_logical_apicid(cpu); + return apicid; +} + +static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb) +{ + return cpuid_apic >> index_msb; +} + +#endif /* __ASM_MACH_APIC_H */ diff --git a/include/asm-x86/bigsmp/apicdef.h b/include/asm-x86/bigsmp/apicdef.h new file mode 100644 index 000000000000..392c3f5ef2fe --- /dev/null +++ b/include/asm-x86/bigsmp/apicdef.h @@ -0,0 +1,13 @@ +#ifndef __ASM_MACH_APICDEF_H +#define __ASM_MACH_APICDEF_H + +#define APIC_ID_MASK (0xFF<<24) + +static inline unsigned get_apic_id(unsigned long x) +{ + return (((x)>>24)&0xFF); +} + +#define GET_APIC_ID(x) get_apic_id(x) + +#endif diff --git a/include/asm-x86/bigsmp/ipi.h b/include/asm-x86/bigsmp/ipi.h new file mode 100644 index 000000000000..9404c535b7ec --- /dev/null +++ b/include/asm-x86/bigsmp/ipi.h @@ -0,0 +1,25 @@ +#ifndef __ASM_MACH_IPI_H +#define __ASM_MACH_IPI_H + +void send_IPI_mask_sequence(cpumask_t mask, int vector); + +static inline void send_IPI_mask(cpumask_t mask, int vector) +{ + send_IPI_mask_sequence(mask, vector); +} + +static inline void send_IPI_allbutself(int vector) +{ + cpumask_t mask = cpu_online_map; + cpu_clear(smp_processor_id(), mask); + + if (!cpus_empty(mask)) + send_IPI_mask(mask, vector); +} + +static inline void send_IPI_all(int vector) +{ + send_IPI_mask(cpu_online_map, vector); +} + +#endif /* __ASM_MACH_IPI_H */ diff --git a/include/asm-x86/mach-bigsmp/mach_apic.h b/include/asm-x86/mach-bigsmp/mach_apic.h deleted file mode 100644 index 05362d44a3ee..000000000000 --- a/include/asm-x86/mach-bigsmp/mach_apic.h +++ /dev/null @@ -1,144 +0,0 @@ -#ifndef ASM_X86__MACH_BIGSMP__MACH_APIC_H -#define ASM_X86__MACH_BIGSMP__MACH_APIC_H - -#define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu)) -#define esr_disable (1) - -static inline int apic_id_registered(void) -{ - return (1); -} - -/* Round robin the irqs amoung the online cpus */ -static inline cpumask_t target_cpus(void) -{ - static unsigned long cpu = NR_CPUS; - do { - if (cpu >= NR_CPUS) - cpu = first_cpu(cpu_online_map); - else - cpu = next_cpu(cpu, cpu_online_map); - } while (cpu >= NR_CPUS); - return cpumask_of_cpu(cpu); -} - -#undef APIC_DEST_LOGICAL -#define APIC_DEST_LOGICAL 0 -#define TARGET_CPUS (target_cpus()) -#define APIC_DFR_VALUE (APIC_DFR_FLAT) -#define INT_DELIVERY_MODE (dest_Fixed) -#define INT_DEST_MODE (0) /* phys delivery to target proc */ -#define NO_BALANCE_IRQ (0) -#define WAKE_SECONDARY_VIA_INIT - - -static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid) -{ - return (0); -} - -static inline unsigned long check_apicid_present(int bit) -{ - return (1); -} - -static inline unsigned long calculate_ldr(int cpu) -{ - unsigned long val, id; - val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; - id = xapic_phys_to_log_apicid(cpu); - val |= SET_APIC_LOGICAL_ID(id); - return val; -} - -/* - * Set up the logical destination ID. - * - * Intel recommends to set DFR, LDR and TPR before enabling - * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel - * document number 292116). So here it goes... - */ -static inline void init_apic_ldr(void) -{ - unsigned long val; - int cpu = smp_processor_id(); - - apic_write(APIC_DFR, APIC_DFR_VALUE); - val = calculate_ldr(cpu); - apic_write(APIC_LDR, val); -} - -static inline void setup_apic_routing(void) -{ - printk("Enabling APIC mode: %s. Using %d I/O APICs\n", - "Physflat", nr_ioapics); -} - -static inline int multi_timer_check(int apic, int irq) -{ - return (0); -} - -static inline int apicid_to_node(int logical_apicid) -{ - return apicid_2_node[hard_smp_processor_id()]; -} - -static inline int cpu_present_to_apicid(int mps_cpu) -{ - if (mps_cpu < NR_CPUS) - return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu); - - return BAD_APICID; -} - -static inline physid_mask_t apicid_to_cpu_present(int phys_apicid) -{ - return physid_mask_of_physid(phys_apicid); -} - -extern u8 cpu_2_logical_apicid[]; -/* Mapping from cpu number to logical apicid */ -static inline int cpu_to_logical_apicid(int cpu) -{ - if (cpu >= NR_CPUS) - return BAD_APICID; - return cpu_physical_id(cpu); -} - -static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map) -{ - /* For clustered we don't have a good way to do this yet - hack */ - return physids_promote(0xFFL); -} - -static inline void setup_portio_remap(void) -{ -} - -static inline void enable_apic_mode(void) -{ -} - -static inline int check_phys_apicid_present(int boot_cpu_physical_apicid) -{ - return (1); -} - -/* As we are using single CPU as destination, pick only one CPU here */ -static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask) -{ - int cpu; - int apicid; - - cpu = first_cpu(cpumask); - apicid = cpu_to_logical_apicid(cpu); - return apicid; -} - -static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb) -{ - return cpuid_apic >> index_msb; -} - -#endif /* ASM_X86__MACH_BIGSMP__MACH_APIC_H */ diff --git a/include/asm-x86/mach-bigsmp/mach_apicdef.h b/include/asm-x86/mach-bigsmp/mach_apicdef.h deleted file mode 100644 index 811935d9d49b..000000000000 --- a/include/asm-x86/mach-bigsmp/mach_apicdef.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef ASM_X86__MACH_BIGSMP__MACH_APICDEF_H -#define ASM_X86__MACH_BIGSMP__MACH_APICDEF_H - -#define APIC_ID_MASK (0xFF<<24) - -static inline unsigned get_apic_id(unsigned long x) -{ - return (((x)>>24)&0xFF); -} - -#define GET_APIC_ID(x) get_apic_id(x) - -#endif /* ASM_X86__MACH_BIGSMP__MACH_APICDEF_H */ diff --git a/include/asm-x86/mach-bigsmp/mach_ipi.h b/include/asm-x86/mach-bigsmp/mach_ipi.h deleted file mode 100644 index b1b0f966a009..000000000000 --- a/include/asm-x86/mach-bigsmp/mach_ipi.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef ASM_X86__MACH_BIGSMP__MACH_IPI_H -#define ASM_X86__MACH_BIGSMP__MACH_IPI_H - -void send_IPI_mask_sequence(cpumask_t mask, int vector); - -static inline void send_IPI_mask(cpumask_t mask, int vector) -{ - send_IPI_mask_sequence(mask, vector); -} - -static inline void send_IPI_allbutself(int vector) -{ - cpumask_t mask = cpu_online_map; - cpu_clear(smp_processor_id(), mask); - - if (!cpus_empty(mask)) - send_IPI_mask(mask, vector); -} - -static inline void send_IPI_all(int vector) -{ - send_IPI_mask(cpu_online_map, vector); -} - -#endif /* ASM_X86__MACH_BIGSMP__MACH_IPI_H */ -- cgit v1.2.2 From c7e7964c9828083aeb41c2664cbf5a32acbfa9d1 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 25 Jul 2008 02:17:33 -0700 Subject: x86: mach_es7000 to es7000 Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- include/asm-x86/es7000/apic.h | 194 +++++++++++++++++++++++++++++ include/asm-x86/es7000/apicdef.h | 13 ++ include/asm-x86/es7000/ipi.h | 24 ++++ include/asm-x86/es7000/mpparse.h | 29 +++++ include/asm-x86/es7000/wakecpu.h | 59 +++++++++ include/asm-x86/mach-es7000/mach_apic.h | 194 ----------------------------- include/asm-x86/mach-es7000/mach_apicdef.h | 13 -- include/asm-x86/mach-es7000/mach_ipi.h | 24 ---- include/asm-x86/mach-es7000/mach_mpparse.h | 29 ----- include/asm-x86/mach-es7000/mach_wakecpu.h | 59 --------- 10 files changed, 319 insertions(+), 319 deletions(-) create mode 100644 include/asm-x86/es7000/apic.h create mode 100644 include/asm-x86/es7000/apicdef.h create mode 100644 include/asm-x86/es7000/ipi.h create mode 100644 include/asm-x86/es7000/mpparse.h create mode 100644 include/asm-x86/es7000/wakecpu.h delete mode 100644 include/asm-x86/mach-es7000/mach_apic.h delete mode 100644 include/asm-x86/mach-es7000/mach_apicdef.h delete mode 100644 include/asm-x86/mach-es7000/mach_ipi.h delete mode 100644 include/asm-x86/mach-es7000/mach_mpparse.h delete mode 100644 include/asm-x86/mach-es7000/mach_wakecpu.h (limited to 'include/asm-x86') diff --git a/include/asm-x86/es7000/apic.h b/include/asm-x86/es7000/apic.h new file mode 100644 index 000000000000..bd2c44d1f7ac --- /dev/null +++ b/include/asm-x86/es7000/apic.h @@ -0,0 +1,194 @@ +#ifndef __ASM_ES7000_APIC_H +#define __ASM_ES7000_APIC_H + +#define xapic_phys_to_log_apicid(cpu) per_cpu(x86_bios_cpu_apicid, cpu) +#define esr_disable (1) + +static inline int apic_id_registered(void) +{ + return (1); +} + +static inline cpumask_t target_cpus(void) +{ +#if defined CONFIG_ES7000_CLUSTERED_APIC + return CPU_MASK_ALL; +#else + return cpumask_of_cpu(smp_processor_id()); +#endif +} +#define TARGET_CPUS (target_cpus()) + +#if defined CONFIG_ES7000_CLUSTERED_APIC +#define APIC_DFR_VALUE (APIC_DFR_CLUSTER) +#define INT_DELIVERY_MODE (dest_LowestPrio) +#define INT_DEST_MODE (1) /* logical delivery broadcast to all procs */ +#define NO_BALANCE_IRQ (1) +#undef WAKE_SECONDARY_VIA_INIT +#define WAKE_SECONDARY_VIA_MIP +#else +#define APIC_DFR_VALUE (APIC_DFR_FLAT) +#define INT_DELIVERY_MODE (dest_Fixed) +#define INT_DEST_MODE (0) /* phys delivery to target procs */ +#define NO_BALANCE_IRQ (0) +#undef APIC_DEST_LOGICAL +#define APIC_DEST_LOGICAL 0x0 +#define WAKE_SECONDARY_VIA_INIT +#endif + +static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid) +{ + return 0; +} +static inline unsigned long check_apicid_present(int bit) +{ + return physid_isset(bit, phys_cpu_present_map); +} + +#define apicid_cluster(apicid) (apicid & 0xF0) + +static inline unsigned long calculate_ldr(int cpu) +{ + unsigned long id; + id = xapic_phys_to_log_apicid(cpu); + return (SET_APIC_LOGICAL_ID(id)); +} + +/* + * Set up the logical destination ID. + * + * Intel recommends to set DFR, LdR and TPR before enabling + * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel + * document number 292116). So here it goes... + */ +static inline void init_apic_ldr(void) +{ + unsigned long val; + int cpu = smp_processor_id(); + + apic_write(APIC_DFR, APIC_DFR_VALUE); + val = calculate_ldr(cpu); + apic_write(APIC_LDR, val); +} + +#ifndef CONFIG_X86_GENERICARCH +extern void enable_apic_mode(void); +#endif + +extern int apic_version [MAX_APICS]; +static inline void setup_apic_routing(void) +{ + int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id()); + printk("Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n", + (apic_version[apic] == 0x14) ? + "Physical Cluster" : "Logical Cluster", nr_ioapics, cpus_addr(TARGET_CPUS)[0]); +} + +static inline int multi_timer_check(int apic, int irq) +{ + return 0; +} + +static inline int apicid_to_node(int logical_apicid) +{ + return 0; +} + + +static inline int cpu_present_to_apicid(int mps_cpu) +{ + if (!mps_cpu) + return boot_cpu_physical_apicid; + else if (mps_cpu < NR_CPUS) + return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu); + else + return BAD_APICID; +} + +static inline physid_mask_t apicid_to_cpu_present(int phys_apicid) +{ + static int id = 0; + physid_mask_t mask; + mask = physid_mask_of_physid(id); + ++id; + return mask; +} + +extern u8 cpu_2_logical_apicid[]; +/* Mapping from cpu number to logical apicid */ +static inline int cpu_to_logical_apicid(int cpu) +{ +#ifdef CONFIG_SMP + if (cpu >= NR_CPUS) + return BAD_APICID; + return (int)cpu_2_logical_apicid[cpu]; +#else + return logical_smp_processor_id(); +#endif +} + +static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map) +{ + /* For clustered we don't have a good way to do this yet - hack */ + return physids_promote(0xff); +} + + +static inline void setup_portio_remap(void) +{ +} + +extern unsigned int boot_cpu_physical_apicid; +static inline int check_phys_apicid_present(int cpu_physical_apicid) +{ + boot_cpu_physical_apicid = read_apic_id(); + return (1); +} + +static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask) +{ + int num_bits_set; + int cpus_found = 0; + int cpu; + int apicid; + + num_bits_set = cpus_weight(cpumask); + /* Return id to all */ + if (num_bits_set == NR_CPUS) +#if defined CONFIG_ES7000_CLUSTERED_APIC + return 0xFF; +#else + return cpu_to_logical_apicid(0); +#endif + /* + * The cpus in the mask must all be on the apic cluster. If are not + * on the same apicid cluster return default value of TARGET_CPUS. + */ + cpu = first_cpu(cpumask); + apicid = cpu_to_logical_apicid(cpu); + while (cpus_found < num_bits_set) { + if (cpu_isset(cpu, cpumask)) { + int new_apicid = cpu_to_logical_apicid(cpu); + if (apicid_cluster(apicid) != + apicid_cluster(new_apicid)){ + printk ("%s: Not a valid mask!\n",__FUNCTION__); +#if defined CONFIG_ES7000_CLUSTERED_APIC + return 0xFF; +#else + return cpu_to_logical_apicid(0); +#endif + } + apicid = new_apicid; + cpus_found++; + } + cpu++; + } + return apicid; +} + +static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb) +{ + return cpuid_apic >> index_msb; +} + +#endif /* __ASM_ES7000_APIC_H */ diff --git a/include/asm-x86/es7000/apicdef.h b/include/asm-x86/es7000/apicdef.h new file mode 100644 index 000000000000..8b234a3cb851 --- /dev/null +++ b/include/asm-x86/es7000/apicdef.h @@ -0,0 +1,13 @@ +#ifndef __ASM_ES7000_APICDEF_H +#define __ASM_ES7000_APICDEF_H + +#define APIC_ID_MASK (0xFF<<24) + +static inline unsigned get_apic_id(unsigned long x) +{ + return (((x)>>24)&0xFF); +} + +#define GET_APIC_ID(x) get_apic_id(x) + +#endif diff --git a/include/asm-x86/es7000/ipi.h b/include/asm-x86/es7000/ipi.h new file mode 100644 index 000000000000..632a955fcc0a --- /dev/null +++ b/include/asm-x86/es7000/ipi.h @@ -0,0 +1,24 @@ +#ifndef __ASM_ES7000_IPI_H +#define __ASM_ES7000_IPI_H + +void send_IPI_mask_sequence(cpumask_t mask, int vector); + +static inline void send_IPI_mask(cpumask_t mask, int vector) +{ + send_IPI_mask_sequence(mask, vector); +} + +static inline void send_IPI_allbutself(int vector) +{ + cpumask_t mask = cpu_online_map; + cpu_clear(smp_processor_id(), mask); + if (!cpus_empty(mask)) + send_IPI_mask(mask, vector); +} + +static inline void send_IPI_all(int vector) +{ + send_IPI_mask(cpu_online_map, vector); +} + +#endif /* __ASM_ES7000_IPI_H */ diff --git a/include/asm-x86/es7000/mpparse.h b/include/asm-x86/es7000/mpparse.h new file mode 100644 index 000000000000..7b5c889d8e7d --- /dev/null +++ b/include/asm-x86/es7000/mpparse.h @@ -0,0 +1,29 @@ +#ifndef __ASM_ES7000_MPPARSE_H +#define __ASM_ES7000_MPPARSE_H + +#include + +extern int parse_unisys_oem (char *oemptr); +extern int find_unisys_acpi_oem_table(unsigned long *oem_addr); +extern void setup_unisys(void); + +#ifndef CONFIG_X86_GENERICARCH +extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id); +extern int mps_oem_check(struct mp_config_table *mpc, char *oem, + char *productid); +#endif + +#ifdef CONFIG_ACPI + +static inline int es7000_check_dsdt(void) +{ + struct acpi_table_header header; + + if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) && + !strncmp(header.oem_id, "UNISYS", 6)) + return 1; + return 0; +} +#endif + +#endif /* __ASM_MACH_MPPARSE_H */ diff --git a/include/asm-x86/es7000/wakecpu.h b/include/asm-x86/es7000/wakecpu.h new file mode 100644 index 000000000000..3ffc5a7bf667 --- /dev/null +++ b/include/asm-x86/es7000/wakecpu.h @@ -0,0 +1,59 @@ +#ifndef __ASM_ES7000_WAKECPU_H +#define __ASM_ES7000_WAKECPU_H + +/* + * This file copes with machines that wakeup secondary CPUs by the + * INIT, INIT, STARTUP sequence. + */ + +#ifdef CONFIG_ES7000_CLUSTERED_APIC +#define WAKE_SECONDARY_VIA_MIP +#else +#define WAKE_SECONDARY_VIA_INIT +#endif + +#ifdef WAKE_SECONDARY_VIA_MIP +extern int es7000_start_cpu(int cpu, unsigned long eip); +static inline int +wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) +{ + int boot_error = 0; + boot_error = es7000_start_cpu(phys_apicid, start_eip); + return boot_error; +} +#endif + +#define TRAMPOLINE_LOW phys_to_virt(0x467) +#define TRAMPOLINE_HIGH phys_to_virt(0x469) + +#define boot_cpu_apicid boot_cpu_physical_apicid + +static inline void wait_for_init_deassert(atomic_t *deassert) +{ +#ifdef WAKE_SECONDARY_VIA_INIT + while (!atomic_read(deassert)) + cpu_relax(); +#endif + return; +} + +/* Nothing to do for most platforms, since cleared by the INIT cycle */ +static inline void smp_callin_clear_local_apic(void) +{ +} + +static inline void store_NMI_vector(unsigned short *high, unsigned short *low) +{ +} + +static inline void restore_NMI_vector(unsigned short *high, unsigned short *low) +{ +} + +#if APIC_DEBUG + #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid) +#else + #define inquire_remote_apic(apicid) {} +#endif + +#endif /* __ASM_MACH_WAKECPU_H */ diff --git a/include/asm-x86/mach-es7000/mach_apic.h b/include/asm-x86/mach-es7000/mach_apic.h deleted file mode 100644 index ae877ec267f2..000000000000 --- a/include/asm-x86/mach-es7000/mach_apic.h +++ /dev/null @@ -1,194 +0,0 @@ -#ifndef ASM_X86__MACH_ES7000__MACH_APIC_H -#define ASM_X86__MACH_ES7000__MACH_APIC_H - -#define xapic_phys_to_log_apicid(cpu) per_cpu(x86_bios_cpu_apicid, cpu) -#define esr_disable (1) - -static inline int apic_id_registered(void) -{ - return (1); -} - -static inline cpumask_t target_cpus(void) -{ -#if defined CONFIG_ES7000_CLUSTERED_APIC - return CPU_MASK_ALL; -#else - return cpumask_of_cpu(smp_processor_id()); -#endif -} -#define TARGET_CPUS (target_cpus()) - -#if defined CONFIG_ES7000_CLUSTERED_APIC -#define APIC_DFR_VALUE (APIC_DFR_CLUSTER) -#define INT_DELIVERY_MODE (dest_LowestPrio) -#define INT_DEST_MODE (1) /* logical delivery broadcast to all procs */ -#define NO_BALANCE_IRQ (1) -#undef WAKE_SECONDARY_VIA_INIT -#define WAKE_SECONDARY_VIA_MIP -#else -#define APIC_DFR_VALUE (APIC_DFR_FLAT) -#define INT_DELIVERY_MODE (dest_Fixed) -#define INT_DEST_MODE (0) /* phys delivery to target procs */ -#define NO_BALANCE_IRQ (0) -#undef APIC_DEST_LOGICAL -#define APIC_DEST_LOGICAL 0x0 -#define WAKE_SECONDARY_VIA_INIT -#endif - -static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid) -{ - return 0; -} -static inline unsigned long check_apicid_present(int bit) -{ - return physid_isset(bit, phys_cpu_present_map); -} - -#define apicid_cluster(apicid) (apicid & 0xF0) - -static inline unsigned long calculate_ldr(int cpu) -{ - unsigned long id; - id = xapic_phys_to_log_apicid(cpu); - return (SET_APIC_LOGICAL_ID(id)); -} - -/* - * Set up the logical destination ID. - * - * Intel recommends to set DFR, LdR and TPR before enabling - * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel - * document number 292116). So here it goes... - */ -static inline void init_apic_ldr(void) -{ - unsigned long val; - int cpu = smp_processor_id(); - - apic_write(APIC_DFR, APIC_DFR_VALUE); - val = calculate_ldr(cpu); - apic_write(APIC_LDR, val); -} - -#ifndef CONFIG_X86_GENERICARCH -extern void enable_apic_mode(void); -#endif - -extern int apic_version [MAX_APICS]; -static inline void setup_apic_routing(void) -{ - int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id()); - printk("Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n", - (apic_version[apic] == 0x14) ? - "Physical Cluster" : "Logical Cluster", nr_ioapics, cpus_addr(TARGET_CPUS)[0]); -} - -static inline int multi_timer_check(int apic, int irq) -{ - return 0; -} - -static inline int apicid_to_node(int logical_apicid) -{ - return 0; -} - - -static inline int cpu_present_to_apicid(int mps_cpu) -{ - if (!mps_cpu) - return boot_cpu_physical_apicid; - else if (mps_cpu < NR_CPUS) - return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu); - else - return BAD_APICID; -} - -static inline physid_mask_t apicid_to_cpu_present(int phys_apicid) -{ - static int id = 0; - physid_mask_t mask; - mask = physid_mask_of_physid(id); - ++id; - return mask; -} - -extern u8 cpu_2_logical_apicid[]; -/* Mapping from cpu number to logical apicid */ -static inline int cpu_to_logical_apicid(int cpu) -{ -#ifdef CONFIG_SMP - if (cpu >= NR_CPUS) - return BAD_APICID; - return (int)cpu_2_logical_apicid[cpu]; -#else - return logical_smp_processor_id(); -#endif -} - -static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map) -{ - /* For clustered we don't have a good way to do this yet - hack */ - return physids_promote(0xff); -} - - -static inline void setup_portio_remap(void) -{ -} - -extern unsigned int boot_cpu_physical_apicid; -static inline int check_phys_apicid_present(int cpu_physical_apicid) -{ - boot_cpu_physical_apicid = read_apic_id(); - return (1); -} - -static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask) -{ - int num_bits_set; - int cpus_found = 0; - int cpu; - int apicid; - - num_bits_set = cpus_weight(cpumask); - /* Return id to all */ - if (num_bits_set == NR_CPUS) -#if defined CONFIG_ES7000_CLUSTERED_APIC - return 0xFF; -#else - return cpu_to_logical_apicid(0); -#endif - /* - * The cpus in the mask must all be on the apic cluster. If are not - * on the same apicid cluster return default value of TARGET_CPUS. - */ - cpu = first_cpu(cpumask); - apicid = cpu_to_logical_apicid(cpu); - while (cpus_found < num_bits_set) { - if (cpu_isset(cpu, cpumask)) { - int new_apicid = cpu_to_logical_apicid(cpu); - if (apicid_cluster(apicid) != - apicid_cluster(new_apicid)){ - printk ("%s: Not a valid mask!\n",__FUNCTION__); -#if defined CONFIG_ES7000_CLUSTERED_APIC - return 0xFF; -#else - return cpu_to_logical_apicid(0); -#endif - } - apicid = new_apicid; - cpus_found++; - } - cpu++; - } - return apicid; -} - -static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb) -{ - return cpuid_apic >> index_msb; -} - -#endif /* ASM_X86__MACH_ES7000__MACH_APIC_H */ diff --git a/include/asm-x86/mach-es7000/mach_apicdef.h b/include/asm-x86/mach-es7000/mach_apicdef.h deleted file mode 100644 index a07e56744028..000000000000 --- a/include/asm-x86/mach-es7000/mach_apicdef.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef ASM_X86__MACH_ES7000__MACH_APICDEF_H -#define ASM_X86__MACH_ES7000__MACH_APICDEF_H - -#define APIC_ID_MASK (0xFF<<24) - -static inline unsigned get_apic_id(unsigned long x) -{ - return (((x)>>24)&0xFF); -} - -#define GET_APIC_ID(x) get_apic_id(x) - -#endif /* ASM_X86__MACH_ES7000__MACH_APICDEF_H */ diff --git a/include/asm-x86/mach-es7000/mach_ipi.h b/include/asm-x86/mach-es7000/mach_ipi.h deleted file mode 100644 index 3a21240e03dc..000000000000 --- a/include/asm-x86/mach-es7000/mach_ipi.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef ASM_X86__MACH_ES7000__MACH_IPI_H -#define ASM_X86__MACH_ES7000__MACH_IPI_H - -void send_IPI_mask_sequence(cpumask_t mask, int vector); - -static inline void send_IPI_mask(cpumask_t mask, int vector) -{ - send_IPI_mask_sequence(mask, vector); -} - -static inline void send_IPI_allbutself(int vector) -{ - cpumask_t mask = cpu_online_map; - cpu_clear(smp_processor_id(), mask); - if (!cpus_empty(mask)) - send_IPI_mask(mask, vector); -} - -static inline void send_IPI_all(int vector) -{ - send_IPI_mask(cpu_online_map, vector); -} - -#endif /* ASM_X86__MACH_ES7000__MACH_IPI_H */ diff --git a/include/asm-x86/mach-es7000/mach_mpparse.h b/include/asm-x86/mach-es7000/mach_mpparse.h deleted file mode 100644 index befde24705b7..000000000000 --- a/include/asm-x86/mach-es7000/mach_mpparse.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef ASM_X86__MACH_ES7000__MACH_MPPARSE_H -#define ASM_X86__MACH_ES7000__MACH_MPPARSE_H - -#include - -extern int parse_unisys_oem (char *oemptr); -extern int find_unisys_acpi_oem_table(unsigned long *oem_addr); -extern void setup_unisys(void); - -#ifndef CONFIG_X86_GENERICARCH -extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id); -extern int mps_oem_check(struct mp_config_table *mpc, char *oem, - char *productid); -#endif - -#ifdef CONFIG_ACPI - -static inline int es7000_check_dsdt(void) -{ - struct acpi_table_header header; - - if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) && - !strncmp(header.oem_id, "UNISYS", 6)) - return 1; - return 0; -} -#endif - -#endif /* ASM_X86__MACH_ES7000__MACH_MPPARSE_H */ diff --git a/include/asm-x86/mach-es7000/mach_wakecpu.h b/include/asm-x86/mach-es7000/mach_wakecpu.h deleted file mode 100644 index 97c776ce13f2..000000000000 --- a/include/asm-x86/mach-es7000/mach_wakecpu.h +++ /dev/null @@ -1,59 +0,0 @@ -#ifndef ASM_X86__MACH_ES7000__MACH_WAKECPU_H -#define ASM_X86__MACH_ES7000__MACH_WAKECPU_H - -/* - * This file copes with machines that wakeup secondary CPUs by the - * INIT, INIT, STARTUP sequence. - */ - -#ifdef CONFIG_ES7000_CLUSTERED_APIC -#define WAKE_SECONDARY_VIA_MIP -#else -#define WAKE_SECONDARY_VIA_INIT -#endif - -#ifdef WAKE_SECONDARY_VIA_MIP -extern int es7000_start_cpu(int cpu, unsigned long eip); -static inline int -wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) -{ - int boot_error = 0; - boot_error = es7000_start_cpu(phys_apicid, start_eip); - return boot_error; -} -#endif - -#define TRAMPOLINE_LOW phys_to_virt(0x467) -#define TRAMPOLINE_HIGH phys_to_virt(0x469) - -#define boot_cpu_apicid boot_cpu_physical_apicid - -static inline void wait_for_init_deassert(atomic_t *deassert) -{ -#ifdef WAKE_SECONDARY_VIA_INIT - while (!atomic_read(deassert)) - cpu_relax(); -#endif - return; -} - -/* Nothing to do for most platforms, since cleared by the INIT cycle */ -static inline void smp_callin_clear_local_apic(void) -{ -} - -static inline void store_NMI_vector(unsigned short *high, unsigned short *low) -{ -} - -static inline void restore_NMI_vector(unsigned short *high, unsigned short *low) -{ -} - -#if APIC_DEBUG - #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid) -#else - #define inquire_remote_apic(apicid) {} -#endif - -#endif /* ASM_X86__MACH_ES7000__MACH_WAKECPU_H */ -- cgit v1.2.2 From e8c48efdb971cfb1b043076cf68be535d461a20b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 25 Jul 2008 02:17:44 -0700 Subject: x86: mach_summit to summit Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- include/asm-x86/mach-summit/irq_vectors_limits.h | 14 -- include/asm-x86/mach-summit/mach_apic.h | 185 ----------------------- include/asm-x86/mach-summit/mach_apicdef.h | 13 -- include/asm-x86/mach-summit/mach_ipi.h | 25 --- include/asm-x86/mach-summit/mach_mpparse.h | 110 -------------- include/asm-x86/summit/apic.h | 185 +++++++++++++++++++++++ include/asm-x86/summit/apicdef.h | 13 ++ include/asm-x86/summit/ipi.h | 25 +++ include/asm-x86/summit/irq_vectors_limits.h | 14 ++ include/asm-x86/summit/mpparse.h | 109 +++++++++++++ 10 files changed, 346 insertions(+), 347 deletions(-) delete mode 100644 include/asm-x86/mach-summit/irq_vectors_limits.h delete mode 100644 include/asm-x86/mach-summit/mach_apic.h delete mode 100644 include/asm-x86/mach-summit/mach_apicdef.h delete mode 100644 include/asm-x86/mach-summit/mach_ipi.h delete mode 100644 include/asm-x86/mach-summit/mach_mpparse.h create mode 100644 include/asm-x86/summit/apic.h create mode 100644 include/asm-x86/summit/apicdef.h create mode 100644 include/asm-x86/summit/ipi.h create mode 100644 include/asm-x86/summit/irq_vectors_limits.h create mode 100644 include/asm-x86/summit/mpparse.h (limited to 'include/asm-x86') diff --git a/include/asm-x86/mach-summit/irq_vectors_limits.h b/include/asm-x86/mach-summit/irq_vectors_limits.h deleted file mode 100644 index 22f376ad68e1..000000000000 --- a/include/asm-x86/mach-summit/irq_vectors_limits.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef ASM_X86__MACH_SUMMIT__IRQ_VECTORS_LIMITS_H -#define ASM_X86__MACH_SUMMIT__IRQ_VECTORS_LIMITS_H - -/* - * For Summit or generic (i.e. installer) kernels, we have lots of I/O APICs, - * even with uni-proc kernels, so use a big array. - * - * This value should be the same in both the generic and summit subarches. - * Change one, change 'em both. - */ -#define NR_IRQS 224 -#define NR_IRQ_VECTORS 1024 - -#endif /* ASM_X86__MACH_SUMMIT__IRQ_VECTORS_LIMITS_H */ diff --git a/include/asm-x86/mach-summit/mach_apic.h b/include/asm-x86/mach-summit/mach_apic.h deleted file mode 100644 index 7a66758d701d..000000000000 --- a/include/asm-x86/mach-summit/mach_apic.h +++ /dev/null @@ -1,185 +0,0 @@ -#ifndef ASM_X86__MACH_SUMMIT__MACH_APIC_H -#define ASM_X86__MACH_SUMMIT__MACH_APIC_H - -#include - -#define esr_disable (1) -#define NO_BALANCE_IRQ (0) - -/* In clustered mode, the high nibble of APIC ID is a cluster number. - * The low nibble is a 4-bit bitmap. */ -#define XAPIC_DEST_CPUS_SHIFT 4 -#define XAPIC_DEST_CPUS_MASK ((1u << XAPIC_DEST_CPUS_SHIFT) - 1) -#define XAPIC_DEST_CLUSTER_MASK (XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT) - -#define APIC_DFR_VALUE (APIC_DFR_CLUSTER) - -static inline cpumask_t target_cpus(void) -{ - /* CPU_MASK_ALL (0xff) has undefined behaviour with - * dest_LowestPrio mode logical clustered apic interrupt routing - * Just start on cpu 0. IRQ balancing will spread load - */ - return cpumask_of_cpu(0); -} -#define TARGET_CPUS (target_cpus()) - -#define INT_DELIVERY_MODE (dest_LowestPrio) -#define INT_DEST_MODE 1 /* logical delivery broadcast to all procs */ - -static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid) -{ - return 0; -} - -/* we don't use the phys_cpu_present_map to indicate apicid presence */ -static inline unsigned long check_apicid_present(int bit) -{ - return 1; -} - -#define apicid_cluster(apicid) ((apicid) & XAPIC_DEST_CLUSTER_MASK) - -extern u8 cpu_2_logical_apicid[]; - -static inline void init_apic_ldr(void) -{ - unsigned long val, id; - int count = 0; - u8 my_id = (u8)hard_smp_processor_id(); - u8 my_cluster = (u8)apicid_cluster(my_id); -#ifdef CONFIG_SMP - u8 lid; - int i; - - /* Create logical APIC IDs by counting CPUs already in cluster. */ - for (count = 0, i = NR_CPUS; --i >= 0; ) { - lid = cpu_2_logical_apicid[i]; - if (lid != BAD_APICID && apicid_cluster(lid) == my_cluster) - ++count; - } -#endif - /* We only have a 4 wide bitmap in cluster mode. If a deranged - * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */ - BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT); - id = my_cluster | (1UL << count); - apic_write(APIC_DFR, APIC_DFR_VALUE); - val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; - val |= SET_APIC_LOGICAL_ID(id); - apic_write(APIC_LDR, val); -} - -static inline int multi_timer_check(int apic, int irq) -{ - return 0; -} - -static inline int apic_id_registered(void) -{ - return 1; -} - -static inline void setup_apic_routing(void) -{ - printk("Enabling APIC mode: Summit. Using %d I/O APICs\n", - nr_ioapics); -} - -static inline int apicid_to_node(int logical_apicid) -{ -#ifdef CONFIG_SMP - return apicid_2_node[hard_smp_processor_id()]; -#else - return 0; -#endif -} - -/* Mapping from cpu number to logical apicid */ -static inline int cpu_to_logical_apicid(int cpu) -{ -#ifdef CONFIG_SMP - if (cpu >= NR_CPUS) - return BAD_APICID; - return (int)cpu_2_logical_apicid[cpu]; -#else - return logical_smp_processor_id(); -#endif -} - -static inline int cpu_present_to_apicid(int mps_cpu) -{ - if (mps_cpu < NR_CPUS) - return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu); - else - return BAD_APICID; -} - -static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_id_map) -{ - /* For clustered we don't have a good way to do this yet - hack */ - return physids_promote(0x0F); -} - -static inline physid_mask_t apicid_to_cpu_present(int apicid) -{ - return physid_mask_of_physid(apicid); -} - -static inline void setup_portio_remap(void) -{ -} - -static inline int check_phys_apicid_present(int boot_cpu_physical_apicid) -{ - return 1; -} - -static inline void enable_apic_mode(void) -{ -} - -static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask) -{ - int num_bits_set; - int cpus_found = 0; - int cpu; - int apicid; - - num_bits_set = cpus_weight(cpumask); - /* Return id to all */ - if (num_bits_set == NR_CPUS) - return (int) 0xFF; - /* - * The cpus in the mask must all be on the apic cluster. If are not - * on the same apicid cluster return default value of TARGET_CPUS. - */ - cpu = first_cpu(cpumask); - apicid = cpu_to_logical_apicid(cpu); - while (cpus_found < num_bits_set) { - if (cpu_isset(cpu, cpumask)) { - int new_apicid = cpu_to_logical_apicid(cpu); - if (apicid_cluster(apicid) != - apicid_cluster(new_apicid)){ - printk ("%s: Not a valid mask!\n",__FUNCTION__); - return 0xFF; - } - apicid = apicid | new_apicid; - cpus_found++; - } - cpu++; - } - return apicid; -} - -/* cpuid returns the value latched in the HW at reset, not the APIC ID - * register's value. For any box whose BIOS changes APIC IDs, like - * clustered APIC systems, we must use hard_smp_processor_id. - * - * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID. - */ -static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb) -{ - return hard_smp_processor_id() >> index_msb; -} - -#endif /* ASM_X86__MACH_SUMMIT__MACH_APIC_H */ diff --git a/include/asm-x86/mach-summit/mach_apicdef.h b/include/asm-x86/mach-summit/mach_apicdef.h deleted file mode 100644 index d4bc8590c4f6..000000000000 --- a/include/asm-x86/mach-summit/mach_apicdef.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef ASM_X86__MACH_SUMMIT__MACH_APICDEF_H -#define ASM_X86__MACH_SUMMIT__MACH_APICDEF_H - -#define APIC_ID_MASK (0xFF<<24) - -static inline unsigned get_apic_id(unsigned long x) -{ - return (((x)>>24)&0xFF); -} - -#define GET_APIC_ID(x) get_apic_id(x) - -#endif /* ASM_X86__MACH_SUMMIT__MACH_APICDEF_H */ diff --git a/include/asm-x86/mach-summit/mach_ipi.h b/include/asm-x86/mach-summit/mach_ipi.h deleted file mode 100644 index a3b31c528d90..000000000000 --- a/include/asm-x86/mach-summit/mach_ipi.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef ASM_X86__MACH_SUMMIT__MACH_IPI_H -#define ASM_X86__MACH_SUMMIT__MACH_IPI_H - -void send_IPI_mask_sequence(cpumask_t mask, int vector); - -static inline void send_IPI_mask(cpumask_t mask, int vector) -{ - send_IPI_mask_sequence(mask, vector); -} - -static inline void send_IPI_allbutself(int vector) -{ - cpumask_t mask = cpu_online_map; - cpu_clear(smp_processor_id(), mask); - - if (!cpus_empty(mask)) - send_IPI_mask(mask, vector); -} - -static inline void send_IPI_all(int vector) -{ - send_IPI_mask(cpu_online_map, vector); -} - -#endif /* ASM_X86__MACH_SUMMIT__MACH_IPI_H */ diff --git a/include/asm-x86/mach-summit/mach_mpparse.h b/include/asm-x86/mach-summit/mach_mpparse.h deleted file mode 100644 index 92396f28772b..000000000000 --- a/include/asm-x86/mach-summit/mach_mpparse.h +++ /dev/null @@ -1,110 +0,0 @@ -#ifndef ASM_X86__MACH_SUMMIT__MACH_MPPARSE_H -#define ASM_X86__MACH_SUMMIT__MACH_MPPARSE_H - -#include -#include - -extern int use_cyclone; - -#ifdef CONFIG_X86_SUMMIT_NUMA -extern void setup_summit(void); -#else -#define setup_summit() {} -#endif - -static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, - char *productid) -{ - if (!strncmp(oem, "IBM ENSW", 8) && - (!strncmp(productid, "VIGIL SMP", 9) - || !strncmp(productid, "EXA", 3) - || !strncmp(productid, "RUTHLESS SMP", 12))){ - mark_tsc_unstable("Summit based system"); - use_cyclone = 1; /*enable cyclone-timer*/ - setup_summit(); - return 1; - } - return 0; -} - -/* Hook from generic ACPI tables.c */ -static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) -{ - if (!strncmp(oem_id, "IBM", 3) && - (!strncmp(oem_table_id, "SERVIGIL", 8) - || !strncmp(oem_table_id, "EXA", 3))){ - mark_tsc_unstable("Summit based system"); - use_cyclone = 1; /*enable cyclone-timer*/ - setup_summit(); - return 1; - } - return 0; -} - -struct rio_table_hdr { - unsigned char version; /* Version number of this data structure */ - /* Version 3 adds chassis_num & WP_index */ - unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil) */ - unsigned char num_rio_dev; /* # of RIO I/O devices (Cyclones and Winnipegs) */ -} __attribute__((packed)); - -struct scal_detail { - unsigned char node_id; /* Scalability Node ID */ - unsigned long CBAR; /* Address of 1MB register space */ - unsigned char port0node; /* Node ID port connected to: 0xFF=None */ - unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */ - unsigned char port1node; /* Node ID port connected to: 0xFF = None */ - unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */ - unsigned char port2node; /* Node ID port connected to: 0xFF = None */ - unsigned char port2port; /* Port num port connected to: 0,1,2, or 0xFF=None */ - unsigned char chassis_num; /* 1 based Chassis number (1 = boot node) */ -} __attribute__((packed)); - -struct rio_detail { - unsigned char node_id; /* RIO Node ID */ - unsigned long BBAR; /* Address of 1MB register space */ - unsigned char type; /* Type of device */ - unsigned char owner_id; /* For WPEG: Node ID of Cyclone that owns this WPEG*/ - /* For CYC: Node ID of Twister that owns this CYC */ - unsigned char port0node; /* Node ID port connected to: 0xFF=None */ - unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */ - unsigned char port1node; /* Node ID port connected to: 0xFF=None */ - unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */ - unsigned char first_slot; /* For WPEG: Lowest slot number below this WPEG */ - /* For CYC: 0 */ - unsigned char status; /* For WPEG: Bit 0 = 1 : the XAPIC is used */ - /* = 0 : the XAPIC is not used, ie:*/ - /* ints fwded to another XAPIC */ - /* Bits1:7 Reserved */ - /* For CYC: Bits0:7 Reserved */ - unsigned char WP_index; /* For WPEG: WPEG instance index - lower ones have */ - /* lower slot numbers/PCI bus numbers */ - /* For CYC: No meaning */ - unsigned char chassis_num; /* 1 based Chassis number */ - /* For LookOut WPEGs this field indicates the */ - /* Expansion Chassis #, enumerated from Boot */ - /* Node WPEG external port, then Boot Node CYC */ - /* external port, then Next Vigil chassis WPEG */ - /* external port, etc. */ - /* Shared Lookouts have only 1 chassis number (the */ - /* first one assigned) */ -} __attribute__((packed)); - - -typedef enum { - CompatTwister = 0, /* Compatibility Twister */ - AltTwister = 1, /* Alternate Twister of internal 8-way */ - CompatCyclone = 2, /* Compatibility Cyclone */ - AltCyclone = 3, /* Alternate Cyclone of internal 8-way */ - CompatWPEG = 4, /* Compatibility WPEG */ - AltWPEG = 5, /* Second Planar WPEG */ - LookOutAWPEG = 6, /* LookOut WPEG */ - LookOutBWPEG = 7, /* LookOut WPEG */ -} node_type; - -static inline int is_WPEG(struct rio_detail *rio){ - return (rio->type == CompatWPEG || rio->type == AltWPEG || - rio->type == LookOutAWPEG || rio->type == LookOutBWPEG); -} - -#endif /* ASM_X86__MACH_SUMMIT__MACH_MPPARSE_H */ diff --git a/include/asm-x86/summit/apic.h b/include/asm-x86/summit/apic.h new file mode 100644 index 000000000000..c5b2e4b10358 --- /dev/null +++ b/include/asm-x86/summit/apic.h @@ -0,0 +1,185 @@ +#ifndef __ASM_SUMMIT_APIC_H +#define __ASM_SUMMIT_APIC_H + +#include + +#define esr_disable (1) +#define NO_BALANCE_IRQ (0) + +/* In clustered mode, the high nibble of APIC ID is a cluster number. + * The low nibble is a 4-bit bitmap. */ +#define XAPIC_DEST_CPUS_SHIFT 4 +#define XAPIC_DEST_CPUS_MASK ((1u << XAPIC_DEST_CPUS_SHIFT) - 1) +#define XAPIC_DEST_CLUSTER_MASK (XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT) + +#define APIC_DFR_VALUE (APIC_DFR_CLUSTER) + +static inline cpumask_t target_cpus(void) +{ + /* CPU_MASK_ALL (0xff) has undefined behaviour with + * dest_LowestPrio mode logical clustered apic interrupt routing + * Just start on cpu 0. IRQ balancing will spread load + */ + return cpumask_of_cpu(0); +} +#define TARGET_CPUS (target_cpus()) + +#define INT_DELIVERY_MODE (dest_LowestPrio) +#define INT_DEST_MODE 1 /* logical delivery broadcast to all procs */ + +static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid) +{ + return 0; +} + +/* we don't use the phys_cpu_present_map to indicate apicid presence */ +static inline unsigned long check_apicid_present(int bit) +{ + return 1; +} + +#define apicid_cluster(apicid) ((apicid) & XAPIC_DEST_CLUSTER_MASK) + +extern u8 cpu_2_logical_apicid[]; + +static inline void init_apic_ldr(void) +{ + unsigned long val, id; + int count = 0; + u8 my_id = (u8)hard_smp_processor_id(); + u8 my_cluster = (u8)apicid_cluster(my_id); +#ifdef CONFIG_SMP + u8 lid; + int i; + + /* Create logical APIC IDs by counting CPUs already in cluster. */ + for (count = 0, i = NR_CPUS; --i >= 0; ) { + lid = cpu_2_logical_apicid[i]; + if (lid != BAD_APICID && apicid_cluster(lid) == my_cluster) + ++count; + } +#endif + /* We only have a 4 wide bitmap in cluster mode. If a deranged + * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */ + BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT); + id = my_cluster | (1UL << count); + apic_write(APIC_DFR, APIC_DFR_VALUE); + val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; + val |= SET_APIC_LOGICAL_ID(id); + apic_write(APIC_LDR, val); +} + +static inline int multi_timer_check(int apic, int irq) +{ + return 0; +} + +static inline int apic_id_registered(void) +{ + return 1; +} + +static inline void setup_apic_routing(void) +{ + printk("Enabling APIC mode: Summit. Using %d I/O APICs\n", + nr_ioapics); +} + +static inline int apicid_to_node(int logical_apicid) +{ +#ifdef CONFIG_SMP + return apicid_2_node[hard_smp_processor_id()]; +#else + return 0; +#endif +} + +/* Mapping from cpu number to logical apicid */ +static inline int cpu_to_logical_apicid(int cpu) +{ +#ifdef CONFIG_SMP + if (cpu >= NR_CPUS) + return BAD_APICID; + return (int)cpu_2_logical_apicid[cpu]; +#else + return logical_smp_processor_id(); +#endif +} + +static inline int cpu_present_to_apicid(int mps_cpu) +{ + if (mps_cpu < NR_CPUS) + return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu); + else + return BAD_APICID; +} + +static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_id_map) +{ + /* For clustered we don't have a good way to do this yet - hack */ + return physids_promote(0x0F); +} + +static inline physid_mask_t apicid_to_cpu_present(int apicid) +{ + return physid_mask_of_physid(0); +} + +static inline void setup_portio_remap(void) +{ +} + +static inline int check_phys_apicid_present(int boot_cpu_physical_apicid) +{ + return 1; +} + +static inline void enable_apic_mode(void) +{ +} + +static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask) +{ + int num_bits_set; + int cpus_found = 0; + int cpu; + int apicid; + + num_bits_set = cpus_weight(cpumask); + /* Return id to all */ + if (num_bits_set == NR_CPUS) + return (int) 0xFF; + /* + * The cpus in the mask must all be on the apic cluster. If are not + * on the same apicid cluster return default value of TARGET_CPUS. + */ + cpu = first_cpu(cpumask); + apicid = cpu_to_logical_apicid(cpu); + while (cpus_found < num_bits_set) { + if (cpu_isset(cpu, cpumask)) { + int new_apicid = cpu_to_logical_apicid(cpu); + if (apicid_cluster(apicid) != + apicid_cluster(new_apicid)){ + printk ("%s: Not a valid mask!\n",__FUNCTION__); + return 0xFF; + } + apicid = apicid | new_apicid; + cpus_found++; + } + cpu++; + } + return apicid; +} + +/* cpuid returns the value latched in the HW at reset, not the APIC ID + * register's value. For any box whose BIOS changes APIC IDs, like + * clustered APIC systems, we must use hard_smp_processor_id. + * + * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID. + */ +static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb) +{ + return hard_smp_processor_id() >> index_msb; +} + +#endif /* __ASM_SUMMIT_APIC_H */ diff --git a/include/asm-x86/summit/apicdef.h b/include/asm-x86/summit/apicdef.h new file mode 100644 index 000000000000..f3fbca1f61c1 --- /dev/null +++ b/include/asm-x86/summit/apicdef.h @@ -0,0 +1,13 @@ +#ifndef __ASM_SUMMIT_APICDEF_H +#define __ASM_SUMMIT_APICDEF_H + +#define APIC_ID_MASK (0xFF<<24) + +static inline unsigned get_apic_id(unsigned long x) +{ + return (x>>24)&0xFF; +} + +#define GET_APIC_ID(x) get_apic_id(x) + +#endif diff --git a/include/asm-x86/summit/ipi.h b/include/asm-x86/summit/ipi.h new file mode 100644 index 000000000000..53bd1e7bd7b4 --- /dev/null +++ b/include/asm-x86/summit/ipi.h @@ -0,0 +1,25 @@ +#ifndef __ASM_SUMMIT_IPI_H +#define __ASM_SUMMIT_IPI_H + +void send_IPI_mask_sequence(cpumask_t mask, int vector); + +static inline void send_IPI_mask(cpumask_t mask, int vector) +{ + send_IPI_mask_sequence(mask, vector); +} + +static inline void send_IPI_allbutself(int vector) +{ + cpumask_t mask = cpu_online_map; + cpu_clear(smp_processor_id(), mask); + + if (!cpus_empty(mask)) + send_IPI_mask(mask, vector); +} + +static inline void send_IPI_all(int vector) +{ + send_IPI_mask(cpu_online_map, vector); +} + +#endif /* __ASM_SUMMIT_IPI_H */ diff --git a/include/asm-x86/summit/irq_vectors_limits.h b/include/asm-x86/summit/irq_vectors_limits.h new file mode 100644 index 000000000000..890ce3f5e09a --- /dev/null +++ b/include/asm-x86/summit/irq_vectors_limits.h @@ -0,0 +1,14 @@ +#ifndef _ASM_IRQ_VECTORS_LIMITS_H +#define _ASM_IRQ_VECTORS_LIMITS_H + +/* + * For Summit or generic (i.e. installer) kernels, we have lots of I/O APICs, + * even with uni-proc kernels, so use a big array. + * + * This value should be the same in both the generic and summit subarches. + * Change one, change 'em both. + */ +#define NR_IRQS 224 +#define NR_IRQ_VECTORS 1024 + +#endif /* _ASM_IRQ_VECTORS_LIMITS_H */ diff --git a/include/asm-x86/summit/mpparse.h b/include/asm-x86/summit/mpparse.h new file mode 100644 index 000000000000..013ce6fab2d5 --- /dev/null +++ b/include/asm-x86/summit/mpparse.h @@ -0,0 +1,109 @@ +#ifndef __ASM_SUMMIT_MPPARSE_H +#define __ASM_SUMMIT_MPPARSE_H + +#include + +extern int use_cyclone; + +#ifdef CONFIG_X86_SUMMIT_NUMA +extern void setup_summit(void); +#else +#define setup_summit() {} +#endif + +static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, + char *productid) +{ + if (!strncmp(oem, "IBM ENSW", 8) && + (!strncmp(productid, "VIGIL SMP", 9) + || !strncmp(productid, "EXA", 3) + || !strncmp(productid, "RUTHLESS SMP", 12))){ + mark_tsc_unstable("Summit based system"); + use_cyclone = 1; /*enable cyclone-timer*/ + setup_summit(); + return 1; + } + return 0; +} + +/* Hook from generic ACPI tables.c */ +static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + if (!strncmp(oem_id, "IBM", 3) && + (!strncmp(oem_table_id, "SERVIGIL", 8) + || !strncmp(oem_table_id, "EXA", 3))){ + mark_tsc_unstable("Summit based system"); + use_cyclone = 1; /*enable cyclone-timer*/ + setup_summit(); + return 1; + } + return 0; +} + +struct rio_table_hdr { + unsigned char version; /* Version number of this data structure */ + /* Version 3 adds chassis_num & WP_index */ + unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil) */ + unsigned char num_rio_dev; /* # of RIO I/O devices (Cyclones and Winnipegs) */ +} __attribute__((packed)); + +struct scal_detail { + unsigned char node_id; /* Scalability Node ID */ + unsigned long CBAR; /* Address of 1MB register space */ + unsigned char port0node; /* Node ID port connected to: 0xFF=None */ + unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */ + unsigned char port1node; /* Node ID port connected to: 0xFF = None */ + unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */ + unsigned char port2node; /* Node ID port connected to: 0xFF = None */ + unsigned char port2port; /* Port num port connected to: 0,1,2, or 0xFF=None */ + unsigned char chassis_num; /* 1 based Chassis number (1 = boot node) */ +} __attribute__((packed)); + +struct rio_detail { + unsigned char node_id; /* RIO Node ID */ + unsigned long BBAR; /* Address of 1MB register space */ + unsigned char type; /* Type of device */ + unsigned char owner_id; /* For WPEG: Node ID of Cyclone that owns this WPEG*/ + /* For CYC: Node ID of Twister that owns this CYC */ + unsigned char port0node; /* Node ID port connected to: 0xFF=None */ + unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */ + unsigned char port1node; /* Node ID port connected to: 0xFF=None */ + unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */ + unsigned char first_slot; /* For WPEG: Lowest slot number below this WPEG */ + /* For CYC: 0 */ + unsigned char status; /* For WPEG: Bit 0 = 1 : the XAPIC is used */ + /* = 0 : the XAPIC is not used, ie:*/ + /* ints fwded to another XAPIC */ + /* Bits1:7 Reserved */ + /* For CYC: Bits0:7 Reserved */ + unsigned char WP_index; /* For WPEG: WPEG instance index - lower ones have */ + /* lower slot numbers/PCI bus numbers */ + /* For CYC: No meaning */ + unsigned char chassis_num; /* 1 based Chassis number */ + /* For LookOut WPEGs this field indicates the */ + /* Expansion Chassis #, enumerated from Boot */ + /* Node WPEG external port, then Boot Node CYC */ + /* external port, then Next Vigil chassis WPEG */ + /* external port, etc. */ + /* Shared Lookouts have only 1 chassis number (the */ + /* first one assigned) */ +} __attribute__((packed)); + + +typedef enum { + CompatTwister = 0, /* Compatibility Twister */ + AltTwister = 1, /* Alternate Twister of internal 8-way */ + CompatCyclone = 2, /* Compatibility Cyclone */ + AltCyclone = 3, /* Alternate Cyclone of internal 8-way */ + CompatWPEG = 4, /* Compatibility WPEG */ + AltWPEG = 5, /* Second Planar WPEG */ + LookOutAWPEG = 6, /* LookOut WPEG */ + LookOutBWPEG = 7, /* LookOut WPEG */ +} node_type; + +static inline int is_WPEG(struct rio_detail *rio){ + return (rio->type == CompatWPEG || rio->type == AltWPEG || + rio->type == LookOutAWPEG || rio->type == LookOutBWPEG); +} + +#endif /* __ASM_SUMMIT_MPPARSE_H */ -- cgit v1.2.2 From edb181ac4b0c7c1240503da46349a3fb69af9ef6 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 25 Jul 2008 02:17:55 -0700 Subject: x86: mach-numaq to numaq Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- include/asm-x86/mach-numaq/mach_apic.h | 138 ------------------------------ include/asm-x86/mach-numaq/mach_apicdef.h | 14 --- include/asm-x86/mach-numaq/mach_ipi.h | 25 ------ include/asm-x86/mach-numaq/mach_mpparse.h | 7 -- include/asm-x86/mach-numaq/mach_wakecpu.h | 43 ---------- include/asm-x86/numaq/apic.h | 138 ++++++++++++++++++++++++++++++ include/asm-x86/numaq/apicdef.h | 14 +++ include/asm-x86/numaq/ipi.h | 25 ++++++ include/asm-x86/numaq/mpparse.h | 7 ++ include/asm-x86/numaq/wakecpu.h | 43 ++++++++++ 10 files changed, 227 insertions(+), 227 deletions(-) delete mode 100644 include/asm-x86/mach-numaq/mach_apic.h delete mode 100644 include/asm-x86/mach-numaq/mach_apicdef.h delete mode 100644 include/asm-x86/mach-numaq/mach_ipi.h delete mode 100644 include/asm-x86/mach-numaq/mach_mpparse.h delete mode 100644 include/asm-x86/mach-numaq/mach_wakecpu.h create mode 100644 include/asm-x86/numaq/apic.h create mode 100644 include/asm-x86/numaq/apicdef.h create mode 100644 include/asm-x86/numaq/ipi.h create mode 100644 include/asm-x86/numaq/mpparse.h create mode 100644 include/asm-x86/numaq/wakecpu.h (limited to 'include/asm-x86') diff --git a/include/asm-x86/mach-numaq/mach_apic.h b/include/asm-x86/mach-numaq/mach_apic.h deleted file mode 100644 index 7a0d39edfcfa..000000000000 --- a/include/asm-x86/mach-numaq/mach_apic.h +++ /dev/null @@ -1,138 +0,0 @@ -#ifndef ASM_X86__MACH_NUMAQ__MACH_APIC_H -#define ASM_X86__MACH_NUMAQ__MACH_APIC_H - -#include -#include -#include - -#define APIC_DFR_VALUE (APIC_DFR_CLUSTER) - -static inline cpumask_t target_cpus(void) -{ - return CPU_MASK_ALL; -} - -#define TARGET_CPUS (target_cpus()) - -#define NO_BALANCE_IRQ (1) -#define esr_disable (1) - -#define INT_DELIVERY_MODE dest_LowestPrio -#define INT_DEST_MODE 0 /* physical delivery on LOCAL quad */ - -static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid) -{ - return physid_isset(apicid, bitmap); -} -static inline unsigned long check_apicid_present(int bit) -{ - return physid_isset(bit, phys_cpu_present_map); -} -#define apicid_cluster(apicid) (apicid & 0xF0) - -static inline int apic_id_registered(void) -{ - return 1; -} - -static inline void init_apic_ldr(void) -{ - /* Already done in NUMA-Q firmware */ -} - -static inline void setup_apic_routing(void) -{ - printk("Enabling APIC mode: %s. Using %d I/O APICs\n", - "NUMA-Q", nr_ioapics); -} - -/* - * Skip adding the timer int on secondary nodes, which causes - * a small but painful rift in the time-space continuum. - */ -static inline int multi_timer_check(int apic, int irq) -{ - return apic != 0 && irq == 0; -} - -static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map) -{ - /* We don't have a good way to do this yet - hack */ - return physids_promote(0xFUL); -} - -/* Mapping from cpu number to logical apicid */ -extern u8 cpu_2_logical_apicid[]; -static inline int cpu_to_logical_apicid(int cpu) -{ - if (cpu >= NR_CPUS) - return BAD_APICID; - return (int)cpu_2_logical_apicid[cpu]; -} - -/* - * Supporting over 60 cpus on NUMA-Q requires a locality-dependent - * cpu to APIC ID relation to properly interact with the intelligent - * mode of the cluster controller. - */ -static inline int cpu_present_to_apicid(int mps_cpu) -{ - if (mps_cpu < 60) - return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3)); - else - return BAD_APICID; -} - -static inline int apicid_to_node(int logical_apicid) -{ - return logical_apicid >> 4; -} - -static inline physid_mask_t apicid_to_cpu_present(int logical_apicid) -{ - int node = apicid_to_node(logical_apicid); - int cpu = __ffs(logical_apicid & 0xf); - - return physid_mask_of_physid(cpu + 4*node); -} - -extern void *xquad_portio; - -static inline void setup_portio_remap(void) -{ - int num_quads = num_online_nodes(); - - if (num_quads <= 1) - return; - - printk("Remapping cross-quad port I/O for %d quads\n", num_quads); - xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD); - printk("xquad_portio vaddr 0x%08lx, len %08lx\n", - (u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD); -} - -static inline int check_phys_apicid_present(int boot_cpu_physical_apicid) -{ - return (1); -} - -static inline void enable_apic_mode(void) -{ -} - -/* - * We use physical apicids here, not logical, so just return the default - * physical broadcast to stop people from breaking us - */ -static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask) -{ - return (int) 0xF; -} - -/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */ -static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb) -{ - return cpuid_apic >> index_msb; -} - -#endif /* ASM_X86__MACH_NUMAQ__MACH_APIC_H */ diff --git a/include/asm-x86/mach-numaq/mach_apicdef.h b/include/asm-x86/mach-numaq/mach_apicdef.h deleted file mode 100644 index f870ec5f7782..000000000000 --- a/include/asm-x86/mach-numaq/mach_apicdef.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef ASM_X86__MACH_NUMAQ__MACH_APICDEF_H -#define ASM_X86__MACH_NUMAQ__MACH_APICDEF_H - - -#define APIC_ID_MASK (0xF<<24) - -static inline unsigned get_apic_id(unsigned long x) -{ - return (((x)>>24)&0x0F); -} - -#define GET_APIC_ID(x) get_apic_id(x) - -#endif /* ASM_X86__MACH_NUMAQ__MACH_APICDEF_H */ diff --git a/include/asm-x86/mach-numaq/mach_ipi.h b/include/asm-x86/mach-numaq/mach_ipi.h deleted file mode 100644 index 1e835823f4bc..000000000000 --- a/include/asm-x86/mach-numaq/mach_ipi.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef ASM_X86__MACH_NUMAQ__MACH_IPI_H -#define ASM_X86__MACH_NUMAQ__MACH_IPI_H - -void send_IPI_mask_sequence(cpumask_t, int vector); - -static inline void send_IPI_mask(cpumask_t mask, int vector) -{ - send_IPI_mask_sequence(mask, vector); -} - -static inline void send_IPI_allbutself(int vector) -{ - cpumask_t mask = cpu_online_map; - cpu_clear(smp_processor_id(), mask); - - if (!cpus_empty(mask)) - send_IPI_mask(mask, vector); -} - -static inline void send_IPI_all(int vector) -{ - send_IPI_mask(cpu_online_map, vector); -} - -#endif /* ASM_X86__MACH_NUMAQ__MACH_IPI_H */ diff --git a/include/asm-x86/mach-numaq/mach_mpparse.h b/include/asm-x86/mach-numaq/mach_mpparse.h deleted file mode 100644 index 74ade184920b..000000000000 --- a/include/asm-x86/mach-numaq/mach_mpparse.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef ASM_X86__MACH_NUMAQ__MACH_MPPARSE_H -#define ASM_X86__MACH_NUMAQ__MACH_MPPARSE_H - -extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem, - char *productid); - -#endif /* ASM_X86__MACH_NUMAQ__MACH_MPPARSE_H */ diff --git a/include/asm-x86/mach-numaq/mach_wakecpu.h b/include/asm-x86/mach-numaq/mach_wakecpu.h deleted file mode 100644 index 0db8cea643c0..000000000000 --- a/include/asm-x86/mach-numaq/mach_wakecpu.h +++ /dev/null @@ -1,43 +0,0 @@ -#ifndef ASM_X86__MACH_NUMAQ__MACH_WAKECPU_H -#define ASM_X86__MACH_NUMAQ__MACH_WAKECPU_H - -/* This file copes with machines that wakeup secondary CPUs by NMIs */ - -#define WAKE_SECONDARY_VIA_NMI - -#define TRAMPOLINE_LOW phys_to_virt(0x8) -#define TRAMPOLINE_HIGH phys_to_virt(0xa) - -#define boot_cpu_apicid boot_cpu_logical_apicid - -/* We don't do anything here because we use NMI's to boot instead */ -static inline void wait_for_init_deassert(atomic_t *deassert) -{ -} - -/* - * Because we use NMIs rather than the INIT-STARTUP sequence to - * bootstrap the CPUs, the APIC may be in a weird state. Kick it. - */ -static inline void smp_callin_clear_local_apic(void) -{ - clear_local_APIC(); -} - -static inline void store_NMI_vector(unsigned short *high, unsigned short *low) -{ - printk("Storing NMI vector\n"); - *high = *((volatile unsigned short *) TRAMPOLINE_HIGH); - *low = *((volatile unsigned short *) TRAMPOLINE_LOW); -} - -static inline void restore_NMI_vector(unsigned short *high, unsigned short *low) -{ - printk("Restoring NMI vector\n"); - *((volatile unsigned short *) TRAMPOLINE_HIGH) = *high; - *((volatile unsigned short *) TRAMPOLINE_LOW) = *low; -} - -#define inquire_remote_apic(apicid) {} - -#endif /* ASM_X86__MACH_NUMAQ__MACH_WAKECPU_H */ diff --git a/include/asm-x86/numaq/apic.h b/include/asm-x86/numaq/apic.h new file mode 100644 index 000000000000..a8344ba6ea15 --- /dev/null +++ b/include/asm-x86/numaq/apic.h @@ -0,0 +1,138 @@ +#ifndef __ASM_NUMAQ_APIC_H +#define __ASM_NUMAQ_APIC_H + +#include +#include +#include + +#define APIC_DFR_VALUE (APIC_DFR_CLUSTER) + +static inline cpumask_t target_cpus(void) +{ + return CPU_MASK_ALL; +} + +#define TARGET_CPUS (target_cpus()) + +#define NO_BALANCE_IRQ (1) +#define esr_disable (1) + +#define INT_DELIVERY_MODE dest_LowestPrio +#define INT_DEST_MODE 0 /* physical delivery on LOCAL quad */ + +static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid) +{ + return physid_isset(apicid, bitmap); +} +static inline unsigned long check_apicid_present(int bit) +{ + return physid_isset(bit, phys_cpu_present_map); +} +#define apicid_cluster(apicid) (apicid & 0xF0) + +static inline int apic_id_registered(void) +{ + return 1; +} + +static inline void init_apic_ldr(void) +{ + /* Already done in NUMA-Q firmware */ +} + +static inline void setup_apic_routing(void) +{ + printk("Enabling APIC mode: %s. Using %d I/O APICs\n", + "NUMA-Q", nr_ioapics); +} + +/* + * Skip adding the timer int on secondary nodes, which causes + * a small but painful rift in the time-space continuum. + */ +static inline int multi_timer_check(int apic, int irq) +{ + return apic != 0 && irq == 0; +} + +static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map) +{ + /* We don't have a good way to do this yet - hack */ + return physids_promote(0xFUL); +} + +/* Mapping from cpu number to logical apicid */ +extern u8 cpu_2_logical_apicid[]; +static inline int cpu_to_logical_apicid(int cpu) +{ + if (cpu >= NR_CPUS) + return BAD_APICID; + return (int)cpu_2_logical_apicid[cpu]; +} + +/* + * Supporting over 60 cpus on NUMA-Q requires a locality-dependent + * cpu to APIC ID relation to properly interact with the intelligent + * mode of the cluster controller. + */ +static inline int cpu_present_to_apicid(int mps_cpu) +{ + if (mps_cpu < 60) + return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3)); + else + return BAD_APICID; +} + +static inline int apicid_to_node(int logical_apicid) +{ + return logical_apicid >> 4; +} + +static inline physid_mask_t apicid_to_cpu_present(int logical_apicid) +{ + int node = apicid_to_node(logical_apicid); + int cpu = __ffs(logical_apicid & 0xf); + + return physid_mask_of_physid(cpu + 4*node); +} + +extern void *xquad_portio; + +static inline void setup_portio_remap(void) +{ + int num_quads = num_online_nodes(); + + if (num_quads <= 1) + return; + + printk("Remapping cross-quad port I/O for %d quads\n", num_quads); + xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD); + printk("xquad_portio vaddr 0x%08lx, len %08lx\n", + (u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD); +} + +static inline int check_phys_apicid_present(int boot_cpu_physical_apicid) +{ + return (1); +} + +static inline void enable_apic_mode(void) +{ +} + +/* + * We use physical apicids here, not logical, so just return the default + * physical broadcast to stop people from breaking us + */ +static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask) +{ + return (int) 0xF; +} + +/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */ +static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb) +{ + return cpuid_apic >> index_msb; +} + +#endif /* __ASM_NUMAQ_APIC_H */ diff --git a/include/asm-x86/numaq/apicdef.h b/include/asm-x86/numaq/apicdef.h new file mode 100644 index 000000000000..e012a46cc22a --- /dev/null +++ b/include/asm-x86/numaq/apicdef.h @@ -0,0 +1,14 @@ +#ifndef __ASM_NUMAQ_APICDEF_H +#define __ASM_NUMAQ_APICDEF_H + + +#define APIC_ID_MASK (0xF<<24) + +static inline unsigned get_apic_id(unsigned long x) +{ + return (((x)>>24)&0x0F); +} + +#define GET_APIC_ID(x) get_apic_id(x) + +#endif diff --git a/include/asm-x86/numaq/ipi.h b/include/asm-x86/numaq/ipi.h new file mode 100644 index 000000000000..935588d286cf --- /dev/null +++ b/include/asm-x86/numaq/ipi.h @@ -0,0 +1,25 @@ +#ifndef __ASM_NUMAQ_IPI_H +#define __ASM_NUMAQ_IPI_H + +void send_IPI_mask_sequence(cpumask_t, int vector); + +static inline void send_IPI_mask(cpumask_t mask, int vector) +{ + send_IPI_mask_sequence(mask, vector); +} + +static inline void send_IPI_allbutself(int vector) +{ + cpumask_t mask = cpu_online_map; + cpu_clear(smp_processor_id(), mask); + + if (!cpus_empty(mask)) + send_IPI_mask(mask, vector); +} + +static inline void send_IPI_all(int vector) +{ + send_IPI_mask(cpu_online_map, vector); +} + +#endif /* __ASM_NUMAQ_IPI_H */ diff --git a/include/asm-x86/numaq/mpparse.h b/include/asm-x86/numaq/mpparse.h new file mode 100644 index 000000000000..252292e077b6 --- /dev/null +++ b/include/asm-x86/numaq/mpparse.h @@ -0,0 +1,7 @@ +#ifndef __ASM_NUMAQ_MPPARSE_H +#define __ASM_NUMAQ_MPPARSE_H + +extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem, + char *productid); + +#endif /* __ASM_NUMAQ_MPPARSE_H */ diff --git a/include/asm-x86/numaq/wakecpu.h b/include/asm-x86/numaq/wakecpu.h new file mode 100644 index 000000000000..c577bda5b1c5 --- /dev/null +++ b/include/asm-x86/numaq/wakecpu.h @@ -0,0 +1,43 @@ +#ifndef __ASM_NUMAQ_WAKECPU_H +#define __ASM_NUMAQ_WAKECPU_H + +/* This file copes with machines that wakeup secondary CPUs by NMIs */ + +#define WAKE_SECONDARY_VIA_NMI + +#define TRAMPOLINE_LOW phys_to_virt(0x8) +#define TRAMPOLINE_HIGH phys_to_virt(0xa) + +#define boot_cpu_apicid boot_cpu_logical_apicid + +/* We don't do anything here because we use NMI's to boot instead */ +static inline void wait_for_init_deassert(atomic_t *deassert) +{ +} + +/* + * Because we use NMIs rather than the INIT-STARTUP sequence to + * bootstrap the CPUs, the APIC may be in a weird state. Kick it. + */ +static inline void smp_callin_clear_local_apic(void) +{ + clear_local_APIC(); +} + +static inline void store_NMI_vector(unsigned short *high, unsigned short *low) +{ + printk("Storing NMI vector\n"); + *high = *((volatile unsigned short *) TRAMPOLINE_HIGH); + *low = *((volatile unsigned short *) TRAMPOLINE_LOW); +} + +static inline void restore_NMI_vector(unsigned short *high, unsigned short *low) +{ + printk("Restoring NMI vector\n"); + *((volatile unsigned short *) TRAMPOLINE_HIGH) = *high; + *((volatile unsigned short *) TRAMPOLINE_LOW) = *low; +} + +#define inquire_remote_apic(apicid) {} + +#endif /* __ASM_NUMAQ_WAKECPU_H */ -- cgit v1.2.2 From a648bf4632628c787abb0514277f2a231fca39ca Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Tue, 29 Jul 2008 10:29:18 -0700 Subject: x86, xsave: xsave cpuid feature bits Add xsave CPU feature bits. Signed-off-by: Suresh Siddha Signed-off-by: H. Peter Anvin Signed-off-by: Ingo Molnar --- include/asm-x86/cpufeature.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h index 42afe9ca3a37..c76b3f67cb3f 100644 --- a/include/asm-x86/cpufeature.h +++ b/include/asm-x86/cpufeature.h @@ -92,6 +92,7 @@ #define X86_FEATURE_XTPR (4*32+14) /* Send Task Priority Messages */ #define X86_FEATURE_DCA (4*32+18) /* Direct Cache Access */ #define X86_FEATURE_X2APIC (4*32+21) /* x2APIC */ +#define X86_FEATURE_XSAVE (4*32+26) /* XSAVE */ /* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */ #define X86_FEATURE_XSTORE (5*32+ 2) /* on-CPU RNG present (xstore insn) */ @@ -191,6 +192,7 @@ extern const char * const x86_power_flags[32]; #define cpu_has_arch_perfmon boot_cpu_has(X86_FEATURE_ARCH_PERFMON) #define cpu_has_pat boot_cpu_has(X86_FEATURE_PAT) #define cpu_has_x2apic boot_cpu_has(X86_FEATURE_X2APIC) +#define cpu_has_xsave boot_cpu_has(X86_FEATURE_XSAVE) #if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64) # define cpu_has_invlpg 1 -- cgit v1.2.2 From dc1e35c6e95e8923cf1d3510438b63c600fee1e2 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Tue, 29 Jul 2008 10:29:19 -0700 Subject: x86, xsave: enable xsave/xrstor on cpus with xsave support Enables xsave/xrstor by turning on cr4.osxsave on cpu's which have the xsave support. For now, features that OS supports/enabled are FP and SSE. Signed-off-by: Suresh Siddha Signed-off-by: H. Peter Anvin Signed-off-by: Ingo Molnar --- include/asm-x86/i387.h | 1 + include/asm-x86/processor-flags.h | 1 + include/asm-x86/processor.h | 12 ++++++++++++ include/asm-x86/xsave.h | 26 ++++++++++++++++++++++++++ 4 files changed, 40 insertions(+) create mode 100644 include/asm-x86/xsave.h (limited to 'include/asm-x86') diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h index 3958de6aad0e..6a6647896670 100644 --- a/include/asm-x86/i387.h +++ b/include/asm-x86/i387.h @@ -18,6 +18,7 @@ #include #include #include +#include extern void fpu_init(void); extern void mxcsr_feature_mask_init(void); diff --git a/include/asm-x86/processor-flags.h b/include/asm-x86/processor-flags.h index 5dd79774f693..dc5f0712f9fa 100644 --- a/include/asm-x86/processor-flags.h +++ b/include/asm-x86/processor-flags.h @@ -59,6 +59,7 @@ #define X86_CR4_OSFXSR 0x00000200 /* enable fast FPU save and restore */ #define X86_CR4_OSXMMEXCPT 0x00000400 /* enable unmasked SSE exceptions */ #define X86_CR4_VMXE 0x00002000 /* enable VMX virtualization */ +#define X86_CR4_OSXSAVE 0x00040000 /* enable xsave and xrestore */ /* * x86-64 Task Priority Register, CR8 diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h index d60b4d81febe..d7c0221c0278 100644 --- a/include/asm-x86/processor.h +++ b/include/asm-x86/processor.h @@ -346,6 +346,18 @@ struct i387_soft_struct { u32 entry_eip; }; +struct xsave_hdr_struct { + u64 xstate_bv; + u64 reserved1[2]; + u64 reserved2[5]; +} __attribute__((packed)); + +struct xsave_struct { + struct i387_fxsave_struct i387; + struct xsave_hdr_struct xsave_hdr; + /* new processor state extensions will go here */ +} __attribute__ ((packed, aligned (64))); + union thread_xstate { struct i387_fsave_struct fsave; struct i387_fxsave_struct fxsave; diff --git a/include/asm-x86/xsave.h b/include/asm-x86/xsave.h new file mode 100644 index 000000000000..6d70e62c6bdc --- /dev/null +++ b/include/asm-x86/xsave.h @@ -0,0 +1,26 @@ +#ifndef __ASM_X86_XSAVE_H +#define __ASM_X86_XSAVE_H + +#include +#include + +#define XSTATE_FP 0x1 +#define XSTATE_SSE 0x2 + +#define XSTATE_FPSSE (XSTATE_FP | XSTATE_SSE) + +#define FXSAVE_SIZE 512 + +/* + * These are the features that the OS can handle currently. + */ +#define XCNTXT_LMASK (XSTATE_FP | XSTATE_SSE) +#define XCNTXT_HMASK 0x0 + +extern unsigned int xstate_size, pcntxt_hmask, pcntxt_lmask; +extern struct xsave_struct *init_xstate_buf; + +extern void xsave_cntxt_init(void); +extern void xsave_init(void); + +#endif -- cgit v1.2.2 From b359e8a434cc3d09847010fc4aeccf48d69740e4 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Tue, 29 Jul 2008 10:29:20 -0700 Subject: x86, xsave: context switch support using xsave/xrstor Uses xsave/xrstor (instead of traditional fxsave/fxrstor) in context switch when available. Introduces TS_XSAVE flag, which determine the need to use xsave/xrstor instructions during context switch instead of the legacy fxsave/fxrstor instructions. Thread-synchronous status word is already in L1 cache during this code patch and thus minimizes the performance penality compared to (cpu_has_xsave) checks. Signed-off-by: Suresh Siddha Signed-off-by: H. Peter Anvin Signed-off-by: Ingo Molnar --- include/asm-x86/i387.h | 64 +++++++++++++++++++++++++++++++++++++++---- include/asm-x86/processor.h | 1 + include/asm-x86/thread_info.h | 1 + include/asm-x86/xsave.h | 35 ++++++++++++++++++++++- 4 files changed, 95 insertions(+), 6 deletions(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h index 6a6647896670..a6d256f4ac81 100644 --- a/include/asm-x86/i387.h +++ b/include/asm-x86/i387.h @@ -36,6 +36,8 @@ extern int save_i387_ia32(struct _fpstate_ia32 __user *buf); extern int restore_i387_ia32(struct _fpstate_ia32 __user *buf); #endif +#define X87_FSW_ES (1 << 7) /* Exception Summary */ + #ifdef CONFIG_X86_64 /* Ignore delayed exceptions from user space */ @@ -46,7 +48,7 @@ static inline void tolerant_fwait(void) _ASM_EXTABLE(1b, 2b)); } -static inline int restore_fpu_checking(struct i387_fxsave_struct *fx) +static inline int fxrstor_checking(struct i387_fxsave_struct *fx) { int err; @@ -66,15 +68,31 @@ static inline int restore_fpu_checking(struct i387_fxsave_struct *fx) return err; } -#define X87_FSW_ES (1 << 7) /* Exception Summary */ +static inline int restore_fpu_checking(struct task_struct *tsk) +{ + if (task_thread_info(tsk)->status & TS_XSAVE) + return xrstor_checking(&tsk->thread.xstate->xsave); + else + return fxrstor_checking(&tsk->thread.xstate->fxsave); +} /* AMD CPUs don't save/restore FDP/FIP/FOP unless an exception is pending. Clear the x87 state here by setting it to fixed values. The kernel data segment can be sometimes 0 and sometimes new user value. Both should be ok. Use the PDA as safe address because it should be already in L1. */ -static inline void clear_fpu_state(struct i387_fxsave_struct *fx) +static inline void clear_fpu_state(struct task_struct *tsk) { + struct xsave_struct *xstate = &tsk->thread.xstate->xsave; + struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave; + + /* + * xsave header may indicate the init state of the FP. + */ + if ((task_thread_info(tsk)->status & TS_XSAVE) && + !(xstate->xsave_hdr.xstate_bv & XSTATE_FP)) + return; + if (unlikely(fx->swd & X87_FSW_ES)) asm volatile("fnclex"); alternative_input(ASM_NOP8 ASM_NOP2, @@ -107,7 +125,7 @@ static inline int save_i387_checking(struct i387_fxsave_struct __user *fx) return err; } -static inline void __save_init_fpu(struct task_struct *tsk) +static inline void fxsave(struct task_struct *tsk) { /* Using "rex64; fxsave %0" is broken because, if the memory operand uses any extended registers for addressing, a second REX prefix @@ -132,7 +150,16 @@ static inline void __save_init_fpu(struct task_struct *tsk) : "=m" (tsk->thread.xstate->fxsave) : "cdaSDb" (&tsk->thread.xstate->fxsave)); #endif - clear_fpu_state(&tsk->thread.xstate->fxsave); +} + +static inline void __save_init_fpu(struct task_struct *tsk) +{ + if (task_thread_info(tsk)->status & TS_XSAVE) + xsave(tsk); + else + fxsave(tsk); + + clear_fpu_state(tsk); task_thread_info(tsk)->status &= ~TS_USEDFPU; } @@ -147,6 +174,10 @@ static inline void tolerant_fwait(void) static inline void restore_fpu(struct task_struct *tsk) { + if (task_thread_info(tsk)->status & TS_XSAVE) { + xrstor_checking(&tsk->thread.xstate->xsave); + return; + } /* * The "nop" is needed to make the instructions the same * length. @@ -172,6 +203,27 @@ static inline void restore_fpu(struct task_struct *tsk) */ static inline void __save_init_fpu(struct task_struct *tsk) { + if (task_thread_info(tsk)->status & TS_XSAVE) { + struct xsave_struct *xstate = &tsk->thread.xstate->xsave; + struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave; + + xsave(tsk); + + /* + * xsave header may indicate the init state of the FP. + */ + if (!(xstate->xsave_hdr.xstate_bv & XSTATE_FP)) + goto end; + + if (unlikely(fx->swd & X87_FSW_ES)) + asm volatile("fnclex"); + + /* + * we can do a simple return here or be paranoid :) + */ + goto clear_state; + } + /* Use more nops than strictly needed in case the compiler varies code */ alternative_input( @@ -181,6 +233,7 @@ static inline void __save_init_fpu(struct task_struct *tsk) X86_FEATURE_FXSR, [fx] "m" (tsk->thread.xstate->fxsave), [fsw] "m" (tsk->thread.xstate->fxsave.swd) : "memory"); +clear_state: /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception is pending. Clear the x87 state here by setting it to fixed values. safe_address is a random variable that should be in L1 */ @@ -190,6 +243,7 @@ static inline void __save_init_fpu(struct task_struct *tsk) "fildl %[addr]", /* set F?P to defined value */ X86_FEATURE_FXSAVE_LEAK, [addr] "m" (safe_address)); +end: task_thread_info(tsk)->status &= ~TS_USEDFPU; } diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h index d7c0221c0278..77b7af6b573b 100644 --- a/include/asm-x86/processor.h +++ b/include/asm-x86/processor.h @@ -362,6 +362,7 @@ union thread_xstate { struct i387_fsave_struct fsave; struct i387_fxsave_struct fxsave; struct i387_soft_struct soft; + struct xsave_struct xsave; }; #ifdef CONFIG_X86_64 diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index e64be8863b76..30586f2ee558 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -239,6 +239,7 @@ static inline struct thread_info *stack_thread_info(void) #define TS_POLLING 0x0004 /* true if in idle loop and not sleeping */ #define TS_RESTORE_SIGMASK 0x0008 /* restore signal mask in do_signal() */ +#define TS_XSAVE 0x0010 /* Use xsave/xrstor */ #define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) diff --git a/include/asm-x86/xsave.h b/include/asm-x86/xsave.h index 6d70e62c6bdc..e835a917ee19 100644 --- a/include/asm-x86/xsave.h +++ b/include/asm-x86/xsave.h @@ -17,10 +17,43 @@ #define XCNTXT_LMASK (XSTATE_FP | XSTATE_SSE) #define XCNTXT_HMASK 0x0 +#ifdef CONFIG_X86_64 +#define REX_PREFIX "0x48, " +#else +#define REX_PREFIX +#endif + extern unsigned int xstate_size, pcntxt_hmask, pcntxt_lmask; extern struct xsave_struct *init_xstate_buf; extern void xsave_cntxt_init(void); extern void xsave_init(void); - +extern int init_fpu(struct task_struct *child); + +static inline int xrstor_checking(struct xsave_struct *fx) +{ + int err; + + asm volatile("1: .byte " REX_PREFIX "0x0f,0xae,0x2f\n\t" + "2:\n" + ".section .fixup,\"ax\"\n" + "3: movl $-1,%[err]\n" + " jmp 2b\n" + ".previous\n" + _ASM_EXTABLE(1b, 3b) + : [err] "=r" (err) + : "D" (fx), "m" (*fx), "a" (-1), "d" (-1), "0" (0) + : "memory"); + + return err; +} + +static inline void xsave(struct task_struct *tsk) +{ + /* This, however, we can work around by forcing the compiler to select + an addressing mode that doesn't require extended registers. */ + __asm__ __volatile__(".byte " REX_PREFIX "0x0f,0xae,0x27" + : : "D" (&(tsk->thread.xstate->xsave)), + "a" (-1), "d"(-1) : "memory"); +} #endif -- cgit v1.2.2 From 3c1c7f101426cb2ecc79d817a8a65928965fc860 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Tue, 29 Jul 2008 10:29:21 -0700 Subject: x86, xsave: dynamically allocate sigframes fpstate instead of static allocation dynamically allocate fpstate on the stack, instead of static allocation in the current sigframe layout on the user stack. This will allow the fpstate structure to grow in the future, which includes extended state information supporting xsave/xrstor. signal handlers will be able to access the fpstate pointer from the sigcontext structure asusual, with no change. For the non RT sigframe's (which are supported only for 32bit apps), current static fpstate layout in the sigframe will be unused(so that we don't change the extramask[] offset in the sigframe and thus prevent breaking app's which modify extramask[]). Signed-off-by: Suresh Siddha Signed-off-by: H. Peter Anvin Signed-off-by: Ingo Molnar --- include/asm-x86/i387.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h index a6d256f4ac81..36dca8db1660 100644 --- a/include/asm-x86/i387.h +++ b/include/asm-x86/i387.h @@ -20,6 +20,7 @@ #include #include +extern unsigned int sig_xstate_size; extern void fpu_init(void); extern void mxcsr_feature_mask_init(void); extern int init_fpu(struct task_struct *child); @@ -31,6 +32,7 @@ extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get; extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set; #ifdef CONFIG_IA32_EMULATION +extern unsigned int sig_xstate_ia32_size; struct _fpstate_ia32; extern int save_i387_ia32(struct _fpstate_ia32 __user *buf); extern int restore_i387_ia32(struct _fpstate_ia32 __user *buf); -- cgit v1.2.2 From ab5137015fed9b948fe835a2d99a4cfbd50a0c40 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Tue, 29 Jul 2008 10:29:22 -0700 Subject: x86, xsave: reorganization of signal save/restore fpstate code layout move 64bit routines that saves/restores fpstate in/from user stack from signal_64.c to xsave.c restore_i387_xstate() now handles the condition when user passes NULL fpstate. Other misc changes for prepartion of xsave/xrstor sigcontext support. Signed-off-by: Suresh Siddha Signed-off-by: H. Peter Anvin Signed-off-by: Ingo Molnar --- include/asm-x86/i387.h | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h index 36dca8db1660..dc3745e8040a 100644 --- a/include/asm-x86/i387.h +++ b/include/asm-x86/i387.h @@ -34,8 +34,9 @@ extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set; #ifdef CONFIG_IA32_EMULATION extern unsigned int sig_xstate_ia32_size; struct _fpstate_ia32; -extern int save_i387_ia32(struct _fpstate_ia32 __user *buf); -extern int restore_i387_ia32(struct _fpstate_ia32 __user *buf); +struct _xstate_ia32; +extern int save_i387_xstate_ia32(void __user *buf); +extern int restore_i387_xstate_ia32(void __user *buf); #endif #define X87_FSW_ES (1 << 7) /* Exception Summary */ @@ -249,13 +250,13 @@ end: task_thread_info(tsk)->status &= ~TS_USEDFPU; } +#endif /* CONFIG_X86_64 */ + /* * Signal frame handlers... */ -extern int save_i387(struct _fpstate __user *buf); -extern int restore_i387(struct _fpstate __user *buf); - -#endif /* CONFIG_X86_64 */ +extern int save_i387_xstate(void __user *buf); +extern int restore_i387_xstate(void __user *buf); static inline void __unlazy_fpu(struct task_struct *tsk) { -- cgit v1.2.2 From 9dc89c0f96a6ce6a1b7f9a47dd8bf6f17e2002c9 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Tue, 29 Jul 2008 10:29:23 -0700 Subject: x86, xsave: xsave/xrstor specific routines Signed-off-by: Suresh Siddha Signed-off-by: H. Peter Anvin Signed-off-by: Ingo Molnar --- include/asm-x86/xsave.h | 52 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/xsave.h b/include/asm-x86/xsave.h index e835a917ee19..b716511aede2 100644 --- a/include/asm-x86/xsave.h +++ b/include/asm-x86/xsave.h @@ -48,6 +48,58 @@ static inline int xrstor_checking(struct xsave_struct *fx) return err; } +static inline int xsave_check(struct xsave_struct __user *buf) +{ + int err; + __asm__ __volatile__("1: .byte " REX_PREFIX "0x0f,0xae,0x27\n" + "2:\n" + ".section .fixup,\"ax\"\n" + "3: movl $-1,%[err]\n" + " jmp 2b\n" + ".previous\n" + ".section __ex_table,\"a\"\n" + _ASM_ALIGN "\n" + _ASM_PTR "1b,3b\n" + ".previous" + : [err] "=r" (err) + : "D" (buf), "a" (-1), "d" (-1), "0" (0) + : "memory"); + if (unlikely(err) && __clear_user(buf, xstate_size)) + err = -EFAULT; + /* No need to clear here because the caller clears USED_MATH */ + return err; +} + +static inline int xrestore_user(struct xsave_struct __user *buf, + unsigned int lmask, + unsigned int hmask) +{ + int err; + struct xsave_struct *xstate = ((__force struct xsave_struct *)buf); + + __asm__ __volatile__("1: .byte " REX_PREFIX "0x0f,0xae,0x2f\n" + "2:\n" + ".section .fixup,\"ax\"\n" + "3: movl $-1,%[err]\n" + " jmp 2b\n" + ".previous\n" + ".section __ex_table,\"a\"\n" + _ASM_ALIGN "\n" + _ASM_PTR "1b,3b\n" + ".previous" + : [err] "=r" (err) + : "D" (xstate), "a" (lmask), "d" (hmask), "0" (0) + : "memory"); /* memory required? */ + return err; +} + +static inline void xrstor_state(struct xsave_struct *fx, int lmask, int hmask) +{ + asm volatile(".byte " REX_PREFIX "0x0f,0xae,0x2f\n\t" + : : "D" (fx), "m" (*fx), "a" (lmask), "d" (hmask) + : "memory"); +} + static inline void xsave(struct task_struct *tsk) { /* This, however, we can work around by forcing the compiler to select -- cgit v1.2.2 From bdd8caba5ed5bb7ee21c9f061597284ffeb280bf Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Tue, 29 Jul 2008 10:29:24 -0700 Subject: x86, xsave: struct _fpstate extensions to include extended state information Bytes 464..511 in the current 512byte layout of fxsave/fxrstor frame, are reserved for SW usage. On cpu's supporting xsave/xrstor, these bytes are used to extended the fpstate pointer in the sigcontext, which now includes the extended state information along with fpstate information. Signed-off-by: Suresh Siddha Signed-off-by: H. Peter Anvin Signed-off-by: Ingo Molnar --- include/asm-x86/processor.h | 7 +++- include/asm-x86/sigcontext.h | 87 ++++++++++++++++++++++++++++++++++++++++-- include/asm-x86/sigcontext32.h | 6 ++- 3 files changed, 94 insertions(+), 6 deletions(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h index 77b7af6b573b..eb4bd8c07730 100644 --- a/include/asm-x86/processor.h +++ b/include/asm-x86/processor.h @@ -322,7 +322,12 @@ struct i387_fxsave_struct { /* 16*16 bytes for each XMM-reg = 256 bytes: */ u32 xmm_space[64]; - u32 padding[24]; + u32 padding[12]; + + union { + u32 padding1[12]; + u32 sw_reserved[12]; + }; } __attribute__((aligned(16))); diff --git a/include/asm-x86/sigcontext.h b/include/asm-x86/sigcontext.h index 24879c85b291..899fe2f8abb9 100644 --- a/include/asm-x86/sigcontext.h +++ b/include/asm-x86/sigcontext.h @@ -4,6 +4,40 @@ #include #include +#define FP_XSTATE_MAGIC1 0x46505853U +#define FP_XSTATE_MAGIC2 0x46505845U +#define FP_XSTATE_MAGIC2_SIZE sizeof(FP_XSTATE_MAGIC2) + +/* + * bytes 464..511 in the current 512byte layout of fxsave/fxrstor frame + * are reserved for SW usage. On cpu's supporting xsave/xrstor, these bytes + * are used to extended the fpstate pointer in the sigcontext, which now + * includes the extended state information along with fpstate information. + * + * Presence of FP_XSTATE_MAGIC1 at the beginning of this SW reserved + * area and FP_XSTATE_MAGIC2 at the end of memory layout + * (extended_size - FP_XSTATE_MAGIC2_SIZE) indicates the presence of the + * extended state information in the memory layout pointed by the fpstate + * pointer in sigcontext. + */ +struct _fpx_sw_bytes { + __u32 magic1; /* FP_XSTATE_MAGIC1 */ + __u32 extended_size; /* total size of the layout referred by + * fpstate pointer in the sigcontext. + */ + __u64 xstate_bv; + /* feature bit mask (including fp/sse/extended + * state) that is present in the memory + * layout. + */ + __u32 xstate_size; /* actual xsave state size, based on the + * features saved in the layout. + * 'extended_size' will be greater than + * 'xstate_size'. + */ + __u32 padding[7]; /* for future use. */ +}; + #ifdef __i386__ /* * As documented in the iBCS2 standard.. @@ -53,7 +87,13 @@ struct _fpstate { unsigned long reserved; struct _fpxreg _fxsr_st[8]; /* FXSR FPU reg data is ignored */ struct _xmmreg _xmm[8]; - unsigned long padding[56]; + unsigned long padding1[44]; + + union { + unsigned long padding2[12]; + struct _fpx_sw_bytes sw_reserved; /* represents the extended + * state info */ + }; }; #define X86_FXSR_MAGIC 0x0000 @@ -79,7 +119,15 @@ struct sigcontext { unsigned long flags; unsigned long sp_at_signal; unsigned short ss, __ssh; - struct _fpstate __user *fpstate; + + /* + * fpstate is really (struct _fpstate *) or (struct _xstate *) + * depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved + * bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end + * of extended memory layout. See comments at the defintion of + * (struct _fpx_sw_bytes) + */ + void __user *fpstate; /* zero when no FPU/extended context */ unsigned long oldmask; unsigned long cr2; }; @@ -130,7 +178,12 @@ struct _fpstate { __u32 mxcsr_mask; __u32 st_space[32]; /* 8*16 bytes for each FP-reg */ __u32 xmm_space[64]; /* 16*16 bytes for each XMM-reg */ - __u32 reserved2[24]; + __u32 reserved2[12]; + union { + __u32 reserved3[12]; + struct _fpx_sw_bytes sw_reserved; /* represents the extended + * state information */ + }; }; #ifdef __KERNEL__ @@ -161,7 +214,15 @@ struct sigcontext { unsigned long trapno; unsigned long oldmask; unsigned long cr2; - struct _fpstate __user *fpstate; /* zero when no FPU context */ + + /* + * fpstate is really (struct _fpstate *) or (struct _xstate *) + * depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved + * bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end + * of extended memory layout. See comments at the defintion of + * (struct _fpx_sw_bytes) + */ + void __user *fpstate; /* zero when no FPU/extended context */ unsigned long reserved1[8]; }; #else /* __KERNEL__ */ @@ -202,4 +263,22 @@ struct sigcontext { #endif /* !__i386__ */ +struct _xsave_hdr { + u64 xstate_bv; + u64 reserved1[2]; + u64 reserved2[5]; +}; + +/* + * Extended state pointed by the fpstate pointer in the sigcontext. + * In addition to the fpstate, information encoded in the xstate_hdr + * indicates the presence of other extended state information + * supported by the processor and OS. + */ +struct _xstate { + struct _fpstate fpstate; + struct _xsave_hdr xstate_hdr; + /* new processor state extensions go here */ +}; + #endif /* ASM_X86__SIGCONTEXT_H */ diff --git a/include/asm-x86/sigcontext32.h b/include/asm-x86/sigcontext32.h index 4e2ec732dd01..8c347032c2f2 100644 --- a/include/asm-x86/sigcontext32.h +++ b/include/asm-x86/sigcontext32.h @@ -40,7 +40,11 @@ struct _fpstate_ia32 { __u32 reserved; struct _fpxreg _fxsr_st[8]; struct _xmmreg _xmm[8]; /* It's actually 16 */ - __u32 padding[56]; + __u32 padding[44]; + union { + __u32 padding2[12]; + struct _fpx_sw_bytes sw_reserved; + }; }; struct sigcontext_ia32 { -- cgit v1.2.2 From c37b5efea43f9e500363f9973dd00e3d2cdcc685 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Tue, 29 Jul 2008 10:29:25 -0700 Subject: x86, xsave: save/restore the extended state context in sigframe On cpu's supporting xsave/xrstor, fpstate pointer in the sigcontext, will include the extended state information along with fpstate information. Presence of extended state information is indicated by the presence of FP_XSTATE_MAGIC1 at fpstate.sw_reserved.magic1 and FP_XSTATE_MAGIC2 at fpstate + (fpstate.sw_reserved.extended_size - FP_XSTATE_MAGIC2_SIZE). Extended feature bit mask that is saved in the memory layout is represented by the fpstate.sw_reserved.xstate_bv For RT signal frames, UC_FP_XSTATE in the uc_flags also indicate the presence of extended state information in the sigcontext's fpstate pointer. Signed-off-by: Suresh Siddha Signed-off-by: H. Peter Anvin Signed-off-by: Ingo Molnar --- include/asm-x86/i387.h | 4 +++- include/asm-x86/ucontext.h | 6 ++++++ include/asm-x86/xsave.h | 5 ++++- 3 files changed, 13 insertions(+), 2 deletions(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h index dc3745e8040a..d3dda7161954 100644 --- a/include/asm-x86/i387.h +++ b/include/asm-x86/i387.h @@ -31,8 +31,10 @@ extern user_regset_active_fn fpregs_active, xfpregs_active; extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get; extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set; +extern struct _fpx_sw_bytes fx_sw_reserved; #ifdef CONFIG_IA32_EMULATION extern unsigned int sig_xstate_ia32_size; +extern struct _fpx_sw_bytes fx_sw_reserved_ia32; struct _fpstate_ia32; struct _xstate_ia32; extern int save_i387_xstate_ia32(void __user *buf); @@ -104,7 +106,7 @@ static inline void clear_fpu_state(struct task_struct *tsk) X86_FEATURE_FXSAVE_LEAK); } -static inline int save_i387_checking(struct i387_fxsave_struct __user *fx) +static inline int fxsave_user(struct i387_fxsave_struct __user *fx) { int err; diff --git a/include/asm-x86/ucontext.h b/include/asm-x86/ucontext.h index 9948dd328084..89eaa5456a7e 100644 --- a/include/asm-x86/ucontext.h +++ b/include/asm-x86/ucontext.h @@ -1,6 +1,12 @@ #ifndef ASM_X86__UCONTEXT_H #define ASM_X86__UCONTEXT_H +#define UC_FP_XSTATE 0x1 /* indicates the presence of extended state + * information in the memory layout pointed + * by the fpstate pointer in the ucontext's + * sigcontext struct (uc_mcontext). + */ + struct ucontext { unsigned long uc_flags; struct ucontext *uc_link; diff --git a/include/asm-x86/xsave.h b/include/asm-x86/xsave.h index b716511aede2..b7f64b9fcd94 100644 --- a/include/asm-x86/xsave.h +++ b/include/asm-x86/xsave.h @@ -29,6 +29,9 @@ extern struct xsave_struct *init_xstate_buf; extern void xsave_cntxt_init(void); extern void xsave_init(void); extern int init_fpu(struct task_struct *child); +extern int check_for_xstate(struct i387_fxsave_struct __user *buf, + void __user *fpstate, + struct _fpx_sw_bytes *sw); static inline int xrstor_checking(struct xsave_struct *fx) { @@ -48,7 +51,7 @@ static inline int xrstor_checking(struct xsave_struct *fx) return err; } -static inline int xsave_check(struct xsave_struct __user *buf) +static inline int xsave_user(struct xsave_struct __user *buf) { int err; __asm__ __volatile__("1: .byte " REX_PREFIX "0x0f,0xae,0x27\n" -- cgit v1.2.2 From b4a091a62c8e91d6077e575600363cff73fa02ef Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 29 Jul 2008 17:30:29 -0700 Subject: x86, xsave: add header file for XCR registers Add header file for the XCR registers and their access functions. Signed-off-by: H. Peter Anvin Signed-off-by: Ingo Molnar --- include/asm-x86/xcr.h | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 include/asm-x86/xcr.h (limited to 'include/asm-x86') diff --git a/include/asm-x86/xcr.h b/include/asm-x86/xcr.h new file mode 100644 index 000000000000..f2cba4e79a23 --- /dev/null +++ b/include/asm-x86/xcr.h @@ -0,0 +1,49 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright 2008 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2 or (at your + * option) any later version; incorporated herein by reference. + * + * ----------------------------------------------------------------------- */ + +/* + * asm-x86/xcr.h + * + * Definitions for the eXtended Control Register instructions + */ + +#ifndef _ASM_X86_XCR_H +#define _ASM_X86_XCR_H + +#define XCR_XFEATURE_ENABLED_MASK 0x00000000 + +#ifdef __KERNEL__ +# ifndef __ASSEMBLY__ + +#include + +static inline u64 xgetbv(u32 index) +{ + u32 eax, edx; + + asm volatile(".byte 0x0f,0x01,0xd0" /* xgetbv */ + : "=a" (eax), "=d" (edx) + : "c" (index)); + return eax + ((u64)edx << 32); +} + +static inline void xsetbv(u32 index, u64 value) +{ + u32 eax = value; + u32 edx = value >> 32; + + asm volatile(".byte 0x0f,0x01,0xd1" /* xsetbv */ + : : "a" (eax), "d" (edx), "c" (index)); +} + +# endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ + +#endif /* _ASM_X86_XCR_H */ -- cgit v1.2.2 From 6152e4b1c99a3689fc318d092cd144597f7dbd14 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 29 Jul 2008 17:23:16 -0700 Subject: x86, xsave: keep the XSAVE feature mask as an u64 The XSAVE feature mask is a 64-bit number; keep it that way, in order to avoid the mistake done with rdmsr/wrmsr. Use the xsetbv() function provided in the previous patch. Signed-off-by: H. Peter Anvin Signed-off-by: Ingo Molnar --- include/asm-x86/xsave.h | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/xsave.h b/include/asm-x86/xsave.h index b7f64b9fcd94..08e9a1ac07a9 100644 --- a/include/asm-x86/xsave.h +++ b/include/asm-x86/xsave.h @@ -1,6 +1,7 @@ #ifndef __ASM_X86_XSAVE_H #define __ASM_X86_XSAVE_H +#include #include #include @@ -14,8 +15,7 @@ /* * These are the features that the OS can handle currently. */ -#define XCNTXT_LMASK (XSTATE_FP | XSTATE_SSE) -#define XCNTXT_HMASK 0x0 +#define XCNTXT_MASK (XSTATE_FP | XSTATE_SSE) #ifdef CONFIG_X86_64 #define REX_PREFIX "0x48, " @@ -23,7 +23,8 @@ #define REX_PREFIX #endif -extern unsigned int xstate_size, pcntxt_hmask, pcntxt_lmask; +extern unsigned int xstate_size; +extern u64 pcntxt_mask; extern struct xsave_struct *init_xstate_buf; extern void xsave_cntxt_init(void); @@ -73,12 +74,12 @@ static inline int xsave_user(struct xsave_struct __user *buf) return err; } -static inline int xrestore_user(struct xsave_struct __user *buf, - unsigned int lmask, - unsigned int hmask) +static inline int xrestore_user(struct xsave_struct __user *buf, u64 mask) { int err; struct xsave_struct *xstate = ((__force struct xsave_struct *)buf); + u32 lmask = mask; + u32 hmask = mask >> 32; __asm__ __volatile__("1: .byte " REX_PREFIX "0x0f,0xae,0x2f\n" "2:\n" @@ -96,8 +97,11 @@ static inline int xrestore_user(struct xsave_struct __user *buf, return err; } -static inline void xrstor_state(struct xsave_struct *fx, int lmask, int hmask) +static inline void xrstor_state(struct xsave_struct *fx, u64 mask) { + u32 lmask = mask; + u32 hmask = mask >> 32; + asm volatile(".byte " REX_PREFIX "0x0f,0xae,0x2f\n\t" : : "D" (fx), "m" (*fx), "a" (lmask), "d" (hmask) : "memory"); -- cgit v1.2.2 From 2ae111cdd8d83ebf9de72e36e68a8c84b6ebbeea Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Mon, 11 Aug 2008 18:34:08 +0400 Subject: x86: apic interrupts - move assignments to irqinit_32.c, v2 64bit mode APIC interrupt handlers are set within irqinit_64.c. Lets do tha same for 32bit mode which would help in furter code merging. Signed-off-by: Cyrill Gorcunov Signed-off-by: Ingo Molnar --- include/asm-x86/arch_hooks.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/arch_hooks.h b/include/asm-x86/arch_hooks.h index 72adc3a109cc..de4596b24c23 100644 --- a/include/asm-x86/arch_hooks.h +++ b/include/asm-x86/arch_hooks.h @@ -12,8 +12,6 @@ /* these aren't arch hooks, they are generic routines * that can be used by the hooks */ extern void init_ISA_irqs(void); -extern void apic_intr_init(void); -extern void smp_intr_init(void); extern irqreturn_t timer_interrupt(int irq, void *dev_id); /* these are the defined hooks */ -- cgit v1.2.2 From 26d809af6397ce5c37f5c44d89734d19cce1ad25 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 13 Aug 2008 12:46:26 +0200 Subject: x86: fix xsave build error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fix this build failure with certain glibc versions: In file included from /usr/include/bits/sigcontext.h:28, from /usr/include/signal.h:333, from Documentation/accounting/getdelays.c:24: /home/mingo/tip/usr/include/asm/sigcontext.h:191: error: expected specifier-qualifier-list before ‘u64’ Signed-off-by: Ingo Molnar --- include/asm-x86/sigcontext.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/sigcontext.h b/include/asm-x86/sigcontext.h index 899fe2f8abb9..ee813f4fe5d5 100644 --- a/include/asm-x86/sigcontext.h +++ b/include/asm-x86/sigcontext.h @@ -264,9 +264,9 @@ struct sigcontext { #endif /* !__i386__ */ struct _xsave_hdr { - u64 xstate_bv; - u64 reserved1[2]; - u64 reserved2[5]; + __u64 xstate_bv; + __u64 reserved1[2]; + __u64 reserved2[5]; }; /* -- cgit v1.2.2 From 8d02c2110b3fb8e2700b31596a582a2989fd72ba Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 5 Aug 2008 11:45:19 +0200 Subject: x86: configuration options to compile out x86 CPU support code This patch adds some configuration options that allow to compile out CPU vendor-specific code in x86 kernels (in arch/x86/kernel/cpu). The new configuration options are only visible when CONFIG_EMBEDDED is selected, as they are mostly interesting for space savings reasons. An example of size saving, on x86 with only Intel CPU support: text data bss dec hex filename 1125479 118760 212992 1457231 163c4f vmlinux.old 1121355 116536 212992 1450883 162383 vmlinux -4124 -2224 0 -6348 -18CC +/- However, I'm not exactly sure that the Kconfig wording is correct with regard to !64BIT / 64BIT. [ mingo@elte.hu: convert macro to inline ] Signed-off-by: Thomas Petazzoni Signed-off-by: Ingo Molnar --- include/asm-x86/bugs.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/bugs.h b/include/asm-x86/bugs.h index 021cbdd5f258..00e4a0cd6f28 100644 --- a/include/asm-x86/bugs.h +++ b/include/asm-x86/bugs.h @@ -2,6 +2,11 @@ #define _ASM_X86_BUGS_H extern void check_bugs(void); + +#ifdef CONFIG_CPU_SUP_INTEL_32 int ppro_with_ram_bug(void); +#else +static inline int ppro_with_ram_bug(void) { return 0; } +#endif #endif /* _ASM_X86_BUGS_H */ -- cgit v1.2.2 From 7e00df5818964298c9821365a6cb7a8304227c5c Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 18 Aug 2008 17:39:32 -0700 Subject: x86: add NOPL as a synthetic CPU feature bit The long noops ("NOPL") are supposed to be detected by family >= 6. Unfortunately, several non-Intel x86 implementations, both hardware and software, don't obey this dictum. Instead, probe for NOPL directly by executing a NOPL instruction and see if we get #UD. Signed-off-by: H. Peter Anvin --- include/asm-x86/cpufeature.h | 11 ++++++----- include/asm-x86/required-features.h | 8 +++++++- 2 files changed, 13 insertions(+), 6 deletions(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h index 2f5a792b0acc..be8b2ad5d411 100644 --- a/include/asm-x86/cpufeature.h +++ b/include/asm-x86/cpufeature.h @@ -72,14 +72,15 @@ #define X86_FEATURE_UP (3*32+ 9) /* smp kernel running on up */ #define X86_FEATURE_FXSAVE_LEAK (3*32+10) /* FXSAVE leaks FOP/FIP/FOP */ #define X86_FEATURE_ARCH_PERFMON (3*32+11) /* Intel Architectural PerfMon */ -#define X86_FEATURE_PEBS (3*32+12) /* Precise-Event Based Sampling */ -#define X86_FEATURE_BTS (3*32+13) /* Branch Trace Store */ -#define X86_FEATURE_SYSCALL32 (3*32+14) /* syscall in ia32 userspace */ -#define X86_FEATURE_SYSENTER32 (3*32+15) /* sysenter in ia32 userspace */ +#define X86_FEATURE_PEBS (3*32+12) /* Precise-Event Based Sampling */ +#define X86_FEATURE_BTS (3*32+13) /* Branch Trace Store */ +#define X86_FEATURE_SYSCALL32 (3*32+14) /* syscall in ia32 userspace */ +#define X86_FEATURE_SYSENTER32 (3*32+15) /* sysenter in ia32 userspace */ #define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well on this CPU */ #define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* Mfence synchronizes RDTSC */ #define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */ -#define X86_FEATURE_11AP (3*32+19) /* Bad local APIC aka 11AP */ +#define X86_FEATURE_11AP (3*32+19) /* Bad local APIC aka 11AP */ +#define X86_FEATURE_NOPL (3*32+20) /* The NOPL (0F 1F) instructions */ /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */ #define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */ diff --git a/include/asm-x86/required-features.h b/include/asm-x86/required-features.h index adec887dd7cd..5c2ff4bc2980 100644 --- a/include/asm-x86/required-features.h +++ b/include/asm-x86/required-features.h @@ -41,6 +41,12 @@ # define NEED_3DNOW 0 #endif +#if defined(CONFIG_X86_P6_NOP) || defined(CONFIG_X86_64) +# define NEED_NOPL (1<<(X86_FEATURE_NOPL & 31)) +#else +# define NEED_NOPL 0 +#endif + #ifdef CONFIG_X86_64 #define NEED_PSE 0 #define NEED_MSR (1<<(X86_FEATURE_MSR & 31)) @@ -67,7 +73,7 @@ #define REQUIRED_MASK1 (NEED_LM|NEED_3DNOW) #define REQUIRED_MASK2 0 -#define REQUIRED_MASK3 0 +#define REQUIRED_MASK3 (NEED_NOPL) #define REQUIRED_MASK4 0 #define REQUIRED_MASK5 0 #define REQUIRED_MASK6 0 -- cgit v1.2.2 From 11494547b1754c4f3bd7f707ab869e2adf54d52f Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 21 Aug 2008 01:01:19 -0700 Subject: x86: fix apic version warning after following patch, commit 1b313f4a6d7bee7b2c034b3f1e203bc360a71cca Author: Cyrill Gorcunov Date: Mon Aug 18 20:45:57 2008 +0400 x86: apic - generic_processor_info - use physid_set instead of phys_cpu and physids_or - set phys_cpu_present_map bit AFTER check for allowed number of processors - add checking for APIC valid version in 64bit mode (mostly not needed but added for merging purpose) - add apic_version definition for 64bit mode which is used now we are getting warning for acpi path on 64 bit system. make the 64-bit side fill in apic_version[] as well. [ mingo@elte.hu: build fix ] Signed-off-by: Ingo Molnar --- include/asm-x86/mpspec.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/mpspec.h b/include/asm-x86/mpspec.h index 118da365e371..be2241a818f1 100644 --- a/include/asm-x86/mpspec.h +++ b/include/asm-x86/mpspec.h @@ -5,11 +5,12 @@ #include +extern int apic_version[MAX_APICS]; + #ifdef CONFIG_X86_32 #include extern unsigned int def_to_bigsmp; -extern int apic_version[MAX_APICS]; extern u8 apicid_2_node[]; extern int pic_mode; -- cgit v1.2.2 From 671eef85a3e885dff4ce210d8774ad50a91d5967 Mon Sep 17 00:00:00 2001 From: "Cihula, Joseph" Date: Wed, 20 Aug 2008 16:43:07 -0700 Subject: x86, e820: add support for AddressRangeUnusuable ACPI memory type Add support for the E820_UNUSABLE memory type, which is defined in Revision 3.0b (Oct. 10, 2006) of the ACPI Specification on p. 394 Table 14-1: AddressRangeUnusuable This range of address contains memory in which errors have been detected. This range must not be used by the OSPM. Signed-off-by: Joseph Cihula Signed-off-by: Shane Wang Signed-off-by: Gang Wei Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- include/asm-x86/e820.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index f52daf176bcb..ca433c36af7a 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -43,6 +43,7 @@ #define E820_RESERVED 2 #define E820_ACPI 3 #define E820_NVS 4 +#define E820_UNUSABLE 5 /* reserved RAM used by kernel itself */ #define E820_RESERVED_KERN 128 -- cgit v1.2.2 From bbb65d2d365efe9951290e61678dcf81ec60add4 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Sat, 23 Aug 2008 17:47:10 +0200 Subject: x86: use cpuid vector 0xb when available for detecting cpu topology cpuid leaf 0xb provides extended topology enumeration. This interface provides the 32-bit x2APIC id of the logical processor and it also provides a new mechanism to detect SMT and core siblings (which provides increased addressability). Signed-off-by: Suresh Siddha Signed-off-by: Ingo Molnar --- include/asm-x86/cpufeature.h | 1 + include/asm-x86/processor.h | 1 + 2 files changed, 2 insertions(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h index 5fc4d55906d4..8d842af4cf7a 100644 --- a/include/asm-x86/cpufeature.h +++ b/include/asm-x86/cpufeature.h @@ -81,6 +81,7 @@ #define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */ #define X86_FEATURE_11AP (3*32+19) /* Bad local APIC aka 11AP */ #define X86_FEATURE_NOPL (3*32+20) /* The NOPL (0F 1F) instructions */ +#define X86_FEATURE_XTOPOLOGY (3*32+21) /* cpu topology enum extensions */ /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */ #define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */ diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h index 5f58da401b43..79338fe965d2 100644 --- a/include/asm-x86/processor.h +++ b/include/asm-x86/processor.h @@ -161,6 +161,7 @@ extern void init_scattered_cpuid_features(struct cpuinfo_x86 *c); extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c); extern unsigned short num_cache_leaves; +extern void detect_extended_topology(struct cpuinfo_x86 *c); #if defined(CONFIG_X86_HT) || defined(CONFIG_X86_64) extern void detect_ht(struct cpuinfo_x86 *c); #else -- cgit v1.2.2 From 7414aa41a63348c3bc72d8c37b716024c29b6d50 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Wed, 27 Aug 2008 17:56:44 -0700 Subject: x86: generate names for /proc/cpuinfo from We have had a number of cases where (and its predecessors) have diverged substantially from the names list in /proc/cpuinfo. This patch generates the latter from the former. It retains the option for explicitly overriding the strings, but by making that require a separate action it should at least be less likely to happen. It would be good to do a future pass and rename strings that are gratuituously different in the kernel (/proc/cpuinfo is a userspace interface and must remain constant.) Signed-off-by: H. Peter Anvin --- include/asm-x86/cpufeature.h | 86 +++++++++++++++++++++++++++----------------- 1 file changed, 54 insertions(+), 32 deletions(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h index 9489283a4bcf..611da2898b2b 100644 --- a/include/asm-x86/cpufeature.h +++ b/include/asm-x86/cpufeature.h @@ -8,6 +8,12 @@ #define NCAPINTS 8 /* N 32-bit words worth of info */ +/* + * Note: If the comment begins with a quoted string, that string is used + * in /proc/cpuinfo instead of the macro name. If the string is "", + * this feature bit is not displayed in /proc/cpuinfo at all. + */ + /* Intel-defined CPU features, CPUID level 0x00000001 (edx), word 0 */ #define X86_FEATURE_FPU (0*32+ 0) /* Onboard FPU */ #define X86_FEATURE_VME (0*32+ 1) /* Virtual Mode Extensions */ @@ -27,18 +33,18 @@ #define X86_FEATURE_PAT (0*32+16) /* Page Attribute Table */ #define X86_FEATURE_PSE36 (0*32+17) /* 36-bit PSEs */ #define X86_FEATURE_PN (0*32+18) /* Processor serial number */ -#define X86_FEATURE_CLFLSH (0*32+19) /* Supports the CLFLUSH instruction */ -#define X86_FEATURE_DS (0*32+21) /* Debug Store */ +#define X86_FEATURE_CLFLSH (0*32+19) /* "clflush" Supports the CLFLUSH instruction */ +#define X86_FEATURE_DS (0*32+21) /* "dts" Debug Store */ #define X86_FEATURE_ACPI (0*32+22) /* ACPI via MSR */ #define X86_FEATURE_MMX (0*32+23) /* Multimedia Extensions */ -#define X86_FEATURE_FXSR (0*32+24) /* FXSAVE and FXRSTOR instructions (fast save and restore */ - /* of FPU context), and CR4.OSFXSR available */ -#define X86_FEATURE_XMM (0*32+25) /* Streaming SIMD Extensions */ -#define X86_FEATURE_XMM2 (0*32+26) /* Streaming SIMD Extensions-2 */ -#define X86_FEATURE_SELFSNOOP (0*32+27) /* CPU self snoop */ +#define X86_FEATURE_FXSR (0*32+24) /* FXSAVE/FXRSTOR, CR4.OSFXSR */ +#define X86_FEATURE_XMM (0*32+25) /* "sse" */ +#define X86_FEATURE_XMM2 (0*32+26) /* "sse2" */ +#define X86_FEATURE_SELFSNOOP (0*32+27) /* "ss" CPU self snoop */ #define X86_FEATURE_HT (0*32+28) /* Hyper-Threading */ -#define X86_FEATURE_ACC (0*32+29) /* Automatic clock control */ +#define X86_FEATURE_ACC (0*32+29) /* "tm" Automatic clock control */ #define X86_FEATURE_IA64 (0*32+30) /* IA-64 processor */ +#define X86_FEATURE_PBE (0*32+31) /* Pending Break Enable */ /* AMD-defined CPU features, CPUID level 0x80000001, word 1 */ /* Don't duplicate feature flags which are redundant with Intel! */ @@ -46,7 +52,8 @@ #define X86_FEATURE_MP (1*32+19) /* MP Capable. */ #define X86_FEATURE_NX (1*32+20) /* Execute Disable */ #define X86_FEATURE_MMXEXT (1*32+22) /* AMD MMX extensions */ -#define X86_FEATURE_GBPAGES (1*32+26) /* GB pages */ +#define X86_FEATURE_FXSR_OPT (1*32+25) /* FXSAVE/FXRSTOR optimizations */ +#define X86_FEATURE_GBPAGES (1*32+26) /* "pdpe1gb" GB pages */ #define X86_FEATURE_RDTSCP (1*32+27) /* RDTSCP */ #define X86_FEATURE_LM (1*32+29) /* Long Mode (x86-64) */ #define X86_FEATURE_3DNOWEXT (1*32+30) /* AMD 3DNow! extensions */ @@ -64,52 +71,67 @@ #define X86_FEATURE_CYRIX_ARR (3*32+ 2) /* Cyrix ARRs (= MTRRs) */ #define X86_FEATURE_CENTAUR_MCR (3*32+ 3) /* Centaur MCRs (= MTRRs) */ /* cpu types for specific tunings: */ -#define X86_FEATURE_K8 (3*32+ 4) /* Opteron, Athlon64 */ -#define X86_FEATURE_K7 (3*32+ 5) /* Athlon */ -#define X86_FEATURE_P3 (3*32+ 6) /* P3 */ -#define X86_FEATURE_P4 (3*32+ 7) /* P4 */ +#define X86_FEATURE_K8 (3*32+ 4) /* "" Opteron, Athlon64 */ +#define X86_FEATURE_K7 (3*32+ 5) /* "" Athlon */ +#define X86_FEATURE_P3 (3*32+ 6) /* "" P3 */ +#define X86_FEATURE_P4 (3*32+ 7) /* "" P4 */ #define X86_FEATURE_CONSTANT_TSC (3*32+ 8) /* TSC ticks at a constant rate */ #define X86_FEATURE_UP (3*32+ 9) /* smp kernel running on up */ -#define X86_FEATURE_FXSAVE_LEAK (3*32+10) /* FXSAVE leaks FOP/FIP/FOP */ +#define X86_FEATURE_FXSAVE_LEAK (3*32+10) /* "" FXSAVE leaks FOP/FIP/FOP */ #define X86_FEATURE_ARCH_PERFMON (3*32+11) /* Intel Architectural PerfMon */ #define X86_FEATURE_PEBS (3*32+12) /* Precise-Event Based Sampling */ #define X86_FEATURE_BTS (3*32+13) /* Branch Trace Store */ -#define X86_FEATURE_SYSCALL32 (3*32+14) /* syscall in ia32 userspace */ -#define X86_FEATURE_SYSENTER32 (3*32+15) /* sysenter in ia32 userspace */ +#define X86_FEATURE_SYSCALL32 (3*32+14) /* "" syscall in ia32 userspace */ +#define X86_FEATURE_SYSENTER32 (3*32+15) /* "" sysenter in ia32 userspace */ #define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well on this CPU */ -#define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* Mfence synchronizes RDTSC */ -#define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */ -#define X86_FEATURE_11AP (3*32+19) /* Bad local APIC aka 11AP */ +#define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* "" Mfence synchronizes RDTSC */ +#define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* "" Lfence synchronizes RDTSC */ +#define X86_FEATURE_11AP (3*32+19) /* "" Bad local APIC aka 11AP */ #define X86_FEATURE_NOPL (3*32+20) /* The NOPL (0F 1F) instructions */ /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */ -#define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */ -#define X86_FEATURE_MWAIT (4*32+ 3) /* Monitor/Mwait support */ -#define X86_FEATURE_DSCPL (4*32+ 4) /* CPL Qualified Debug Store */ +#define X86_FEATURE_XMM3 (4*32+ 0) /* "pni" SSE-3 */ +#define X86_FEATURE_MWAIT (4*32+ 3) /* "monitor" Monitor/Mwait support */ +#define X86_FEATURE_DSCPL (4*32+ 4) /* "ds_cpl" CPL Qual. Debug Store */ +#define X86_FEATURE_VMX (4*32+ 5) /* Hardware virtualization */ +#define X86_FEATURE_SMX (4*32+ 6) /* "Safer" mode */ #define X86_FEATURE_EST (4*32+ 7) /* Enhanced SpeedStep */ #define X86_FEATURE_TM2 (4*32+ 8) /* Thermal Monitor 2 */ +#define X86_FEATURE_SSSE3 (4*32+ 9) /* Supplemental SSE-3 */ #define X86_FEATURE_CID (4*32+10) /* Context ID */ #define X86_FEATURE_CX16 (4*32+13) /* CMPXCHG16B */ #define X86_FEATURE_XTPR (4*32+14) /* Send Task Priority Messages */ #define X86_FEATURE_DCA (4*32+18) /* Direct Cache Access */ -#define X86_FEATURE_XMM4_2 (4*32+20) /* Streaming SIMD Extensions-4.2 */ +#define X86_FEATURE_XMM4_1 (4*32+19) /* "sse4_1" SSE-4.1 */ +#define X86_FEATURE_XMM4_2 (4*32+20) /* "sse4_2" SSE-4.2 */ /* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */ -#define X86_FEATURE_XSTORE (5*32+ 2) /* on-CPU RNG present (xstore insn) */ -#define X86_FEATURE_XSTORE_EN (5*32+ 3) /* on-CPU RNG enabled */ -#define X86_FEATURE_XCRYPT (5*32+ 6) /* on-CPU crypto (xcrypt insn) */ -#define X86_FEATURE_XCRYPT_EN (5*32+ 7) /* on-CPU crypto enabled */ +#define X86_FEATURE_XSTORE (5*32+ 2) /* "rng" RNG present (xstore) */ +#define X86_FEATURE_XSTORE_EN (5*32+ 3) /* "rng_en" RNG enabled */ +#define X86_FEATURE_XCRYPT (5*32+ 6) /* "ace" on-CPU crypto (xcrypt) */ +#define X86_FEATURE_XCRYPT_EN (5*32+ 7) /* "ace_en" on-CPU crypto enabled */ #define X86_FEATURE_ACE2 (5*32+ 8) /* Advanced Cryptography Engine v2 */ #define X86_FEATURE_ACE2_EN (5*32+ 9) /* ACE v2 enabled */ -#define X86_FEATURE_PHE (5*32+ 10) /* PadLock Hash Engine */ -#define X86_FEATURE_PHE_EN (5*32+ 11) /* PHE enabled */ -#define X86_FEATURE_PMM (5*32+ 12) /* PadLock Montgomery Multiplier */ -#define X86_FEATURE_PMM_EN (5*32+ 13) /* PMM enabled */ +#define X86_FEATURE_PHE (5*32+10) /* PadLock Hash Engine */ +#define X86_FEATURE_PHE_EN (5*32+11) /* PHE enabled */ +#define X86_FEATURE_PMM (5*32+12) /* PadLock Montgomery Multiplier */ +#define X86_FEATURE_PMM_EN (5*32+13) /* PMM enabled */ /* More extended AMD flags: CPUID level 0x80000001, ecx, word 6 */ #define X86_FEATURE_LAHF_LM (6*32+ 0) /* LAHF/SAHF in long mode */ #define X86_FEATURE_CMP_LEGACY (6*32+ 1) /* If yes HyperThreading not valid */ -#define X86_FEATURE_IBS (6*32+ 10) /* Instruction Based Sampling */ +#define X86_FEATURE_SVM (6*32+ 2) /* Secure virtual machine */ +#define X86_FEATURE_EXTAPIC (6*32+ 3) /* Extended APIC space */ +#define X86_FEATURE_CR8_LEGACY (6*32+ 4) /* CR8 in 32-bit mode */ +#define X86_FEATURE_ABM (6*32+ 5) /* Advanced bit manipulation */ +#define X86_FEATURE_SSE4A (6*32+ 6) /* SSE-4A */ +#define X86_FEATURE_MISALIGNSSE (6*32+ 7) /* Misaligned SSE mode */ +#define X86_FEATURE_3DNOWPREFETCH (6*32+ 8) /* 3DNow prefetch instructions */ +#define X86_FEATURE_OSVW (6*32+ 9) /* OS Visible Workaround */ +#define X86_FEATURE_IBS (6*32+10) /* Instruction Based Sampling */ +#define X86_FEATURE_SSE5 (6*32+11) /* SSE-5 */ +#define X86_FEATURE_SKINIT (6*32+12) /* SKINIT/STGI instructions */ +#define X86_FEATURE_WDT (6*32+13) /* Watchdog timer */ /* * Auxiliary flags: Linux defined - For features scattered in various -- cgit v1.2.2 From f1240c002679a77990fd7c198991ed15a437d691 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Wed, 27 Aug 2008 18:53:07 -0700 Subject: x86: cpufeature: add Intel features from CPUID and AVX specs Add all Intel CPUID features currently documented in the CPUID spec (AP-485, 241618-032, Dec 2007) and the AVX Programming Reference (319433-003, Aug 2008). Signed-off-by: H. Peter Anvin --- include/asm-x86/cpufeature.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h index 611da2898b2b..7bd98b724fd5 100644 --- a/include/asm-x86/cpufeature.h +++ b/include/asm-x86/cpufeature.h @@ -91,6 +91,8 @@ /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */ #define X86_FEATURE_XMM3 (4*32+ 0) /* "pni" SSE-3 */ +#define X86_FEATURE_PCLMULQDQ (4*32+ 1) /* PCLMULQDQ instruction */ +#define X86_FEATURE_DTES64 (4*32+ 2) /* 64-bit Debug Store */ #define X86_FEATURE_MWAIT (4*32+ 3) /* "monitor" Monitor/Mwait support */ #define X86_FEATURE_DSCPL (4*32+ 4) /* "ds_cpl" CPL Qual. Debug Store */ #define X86_FEATURE_VMX (4*32+ 5) /* Hardware virtualization */ @@ -99,11 +101,18 @@ #define X86_FEATURE_TM2 (4*32+ 8) /* Thermal Monitor 2 */ #define X86_FEATURE_SSSE3 (4*32+ 9) /* Supplemental SSE-3 */ #define X86_FEATURE_CID (4*32+10) /* Context ID */ +#define X86_FEATURE_FMA (4*32+12) /* Fused multiply-add */ #define X86_FEATURE_CX16 (4*32+13) /* CMPXCHG16B */ #define X86_FEATURE_XTPR (4*32+14) /* Send Task Priority Messages */ +#define X86_FEATURE_PDCM (4*32+15) /* Performance Capabilities */ #define X86_FEATURE_DCA (4*32+18) /* Direct Cache Access */ #define X86_FEATURE_XMM4_1 (4*32+19) /* "sse4_1" SSE-4.1 */ #define X86_FEATURE_XMM4_2 (4*32+20) /* "sse4_2" SSE-4.2 */ +#define X86_FEATURE_X2APIC (4*32+21) /* x2APIC */ +#define X86_FEATURE_AES (4*32+25) /* AES instructions */ +#define X86_FEATURE_XSAVE (4*32+26) /* XSAVE/XRSTOR/XSETBV/XGETBV */ +#define X86_FEATURE_OSXSAVE (4*32+27) /* "" XSAVE enabled in the OS */ +#define X86_FEATURE_AVX (4*32+28) /* Advanced Vector Extensions */ /* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */ #define X86_FEATURE_XSTORE (5*32+ 2) /* "rng" RNG present (xstore) */ @@ -213,7 +222,10 @@ extern const char * const x86_power_flags[32]; #define cpu_has_gbpages boot_cpu_has(X86_FEATURE_GBPAGES) #define cpu_has_arch_perfmon boot_cpu_has(X86_FEATURE_ARCH_PERFMON) #define cpu_has_pat boot_cpu_has(X86_FEATURE_PAT) +#define cpu_has_xmm4_1 boot_cpu_has(X86_FEATURE_XMM4_1) #define cpu_has_xmm4_2 boot_cpu_has(X86_FEATURE_XMM4_2) +#define cpu_has_x2apic boot_cpu_has(X86_FEATURE_X2APIC) +#define cpu_has_xsave boot_cpu_has(X86_FEATURE_XSAVE) #if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64) # define cpu_has_invlpg 1 -- cgit v1.2.2 From 2798c63e65cb0f05cc12a060b9b0d56ac9523c4d Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Wed, 27 Aug 2008 21:20:07 -0700 Subject: x86: : clean up overlong lines, whitespace Clean up overlong lines and stealth whitespace in . Signed-off-by: H. Peter Anvin --- include/asm-x86/cpufeature.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h index 7bd98b724fd5..7710686c11f9 100644 --- a/include/asm-x86/cpufeature.h +++ b/include/asm-x86/cpufeature.h @@ -20,7 +20,7 @@ #define X86_FEATURE_DE (0*32+ 2) /* Debugging Extensions */ #define X86_FEATURE_PSE (0*32+ 3) /* Page Size Extensions */ #define X86_FEATURE_TSC (0*32+ 4) /* Time Stamp Counter */ -#define X86_FEATURE_MSR (0*32+ 5) /* Model-Specific Registers, RDMSR, WRMSR */ +#define X86_FEATURE_MSR (0*32+ 5) /* Model-Specific Registers */ #define X86_FEATURE_PAE (0*32+ 6) /* Physical Address Extensions */ #define X86_FEATURE_MCE (0*32+ 7) /* Machine Check Architecture */ #define X86_FEATURE_CX8 (0*32+ 8) /* CMPXCHG8 instruction */ @@ -29,11 +29,12 @@ #define X86_FEATURE_MTRR (0*32+12) /* Memory Type Range Registers */ #define X86_FEATURE_PGE (0*32+13) /* Page Global Enable */ #define X86_FEATURE_MCA (0*32+14) /* Machine Check Architecture */ -#define X86_FEATURE_CMOV (0*32+15) /* CMOV instruction (FCMOVCC and FCOMI too if FPU present) */ +#define X86_FEATURE_CMOV (0*32+15) /* CMOV instructions */ + /* (plus FCMOVcc, FCOMI with FPU) */ #define X86_FEATURE_PAT (0*32+16) /* Page Attribute Table */ #define X86_FEATURE_PSE36 (0*32+17) /* 36-bit PSEs */ #define X86_FEATURE_PN (0*32+18) /* Processor serial number */ -#define X86_FEATURE_CLFLSH (0*32+19) /* "clflush" Supports the CLFLUSH instruction */ +#define X86_FEATURE_CLFLSH (0*32+19) /* "clflush" CLFLUSH instruction */ #define X86_FEATURE_DS (0*32+21) /* "dts" Debug Store */ #define X86_FEATURE_ACPI (0*32+22) /* ACPI via MSR */ #define X86_FEATURE_MMX (0*32+23) /* Multimedia Extensions */ @@ -83,7 +84,7 @@ #define X86_FEATURE_BTS (3*32+13) /* Branch Trace Store */ #define X86_FEATURE_SYSCALL32 (3*32+14) /* "" syscall in ia32 userspace */ #define X86_FEATURE_SYSENTER32 (3*32+15) /* "" sysenter in ia32 userspace */ -#define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well on this CPU */ +#define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well */ #define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* "" Mfence synchronizes RDTSC */ #define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* "" Lfence synchronizes RDTSC */ #define X86_FEATURE_11AP (3*32+19) /* "" Bad local APIC aka 11AP */ @@ -181,7 +182,7 @@ extern const char * const x86_power_flags[32]; } while (0) #define setup_force_cpu_cap(bit) do { \ set_cpu_cap(&boot_cpu_data, bit); \ - clear_bit(bit, (unsigned long *)cleared_cpu_caps); \ + clear_bit(bit, (unsigned long *)cleared_cpu_caps); \ } while (0) #define cpu_has_fpu boot_cpu_has(X86_FEATURE_FPU) -- cgit v1.2.2 From af2e1f276ff08f17192411ea3b71c13a758dfe12 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Wed, 27 Aug 2008 22:05:45 -0700 Subject: x86: cpufeature: fix SMX flag Impact: "smx" flags showed as "safer" in /proc/cpuinfo The SMX feature flag is the so-called "safer mode"... I had put that in quotes, but that flagged it as a cpuinfo flag name. Remove the quotes to correct the flag name in /proc/cpuinfo. Signed-off-by: H. Peter Anvin --- include/asm-x86/cpufeature.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h index 7710686c11f9..24d99d65741d 100644 --- a/include/asm-x86/cpufeature.h +++ b/include/asm-x86/cpufeature.h @@ -97,7 +97,7 @@ #define X86_FEATURE_MWAIT (4*32+ 3) /* "monitor" Monitor/Mwait support */ #define X86_FEATURE_DSCPL (4*32+ 4) /* "ds_cpl" CPL Qual. Debug Store */ #define X86_FEATURE_VMX (4*32+ 5) /* Hardware virtualization */ -#define X86_FEATURE_SMX (4*32+ 6) /* "Safer" mode */ +#define X86_FEATURE_SMX (4*32+ 6) /* Safer mode */ #define X86_FEATURE_EST (4*32+ 7) /* Enhanced SpeedStep */ #define X86_FEATURE_TM2 (4*32+ 8) /* Thermal Monitor 2 */ #define X86_FEATURE_SSSE3 (4*32+ 9) /* Supplemental SSE-3 */ -- cgit v1.2.2 From 58f7c98850a226d3fb05b1095af9f7c4ea3507ba Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 28 Aug 2008 13:52:25 -0700 Subject: x86: split e820 reserved entries record to late v2 so could let BAR res register at first, or even pnp. v2: insert e820 reserve resources before pnp_system_init Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- include/asm-x86/e820.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index ca433c36af7a..5abbdec06bd2 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -122,6 +122,7 @@ extern void e820_register_active_regions(int nid, unsigned long start_pfn, extern u64 e820_hole_size(u64 start, u64 end); extern void finish_e820_parsing(void); extern void e820_reserve_resources(void); +extern void e820_reserve_resources_late(void); extern void setup_memory_map(void); extern char *default_machine_specific_memory_setup(void); extern char *machine_specific_memory_setup(void); -- cgit v1.2.2 From 3da99c97763703b23cbf2bd6e96252256d4e4617 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 4 Sep 2008 21:09:44 +0200 Subject: x86: make (early)_identify_cpu more the same between 32bit and 64 bit 1. add extended_cpuid_level for 32bit 2. add generic_identify for 64bit 3. add early_identify_cpu for 32bit 4. early_identify_cpu not be called by identify_cpu 5. remove early in get_cpu_vendor for 32bit 6. add get_cpu_cap 7. add cpu_detect for 64bit Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- include/asm-x86/processor.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h index 4df3e2f6fb56..8208cc1debc7 100644 --- a/include/asm-x86/processor.h +++ b/include/asm-x86/processor.h @@ -77,9 +77,9 @@ struct cpuinfo_x86 { __u8 x86_phys_bits; /* CPUID returned core id bits: */ __u8 x86_coreid_bits; +#endif /* Max extended CPUID function supported: */ __u32 extended_cpuid_level; -#endif /* Maximum supported CPUID level, -1=no CPUID: */ int cpuid_level; __u32 x86_capability[NCAPINTS]; -- cgit v1.2.2 From 97e4db7c8719f67c52793eeca5ec4df4c3407f2a Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 4 Sep 2008 20:08:59 -0700 Subject: x86: make detect_ht depend on CONFIG_X86_HT 64-bit has X86_HT set too, so use that instead of SMP. This also removes a include/asm-x86/processor.h ifdef. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- include/asm-x86/processor.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h index bbbbe1fc5ce1..fc5e961c5b60 100644 --- a/include/asm-x86/processor.h +++ b/include/asm-x86/processor.h @@ -166,11 +166,7 @@ extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c); extern unsigned short num_cache_leaves; extern void detect_extended_topology(struct cpuinfo_x86 *c); -#if defined(CONFIG_X86_HT) || defined(CONFIG_X86_64) extern void detect_ht(struct cpuinfo_x86 *c); -#else -static inline void detect_ht(struct cpuinfo_x86 *c) {} -#endif static inline void native_cpuid(unsigned int *eax, unsigned int *ebx, unsigned int *ecx, unsigned int *edx) -- cgit v1.2.2 From 11fdd252bb5b461289fc5c21dc8fc87dc66f3284 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 7 Sep 2008 17:58:50 -0700 Subject: x86: cpu make amd.c more like amd_64.c v2 1. make 32bit have early_init_amd_mc and amd_detect_cmp 2. seperate init_amd_k5/k6/k7 ... v2: fix compiling for !CONFIG_SMP Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- include/asm-x86/processor.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h index fc5e961c5b60..62531ecbde16 100644 --- a/include/asm-x86/processor.h +++ b/include/asm-x86/processor.h @@ -75,9 +75,9 @@ struct cpuinfo_x86 { int x86_tlbsize; __u8 x86_virt_bits; __u8 x86_phys_bits; +#endif /* CPUID returned core id bits: */ __u8 x86_coreid_bits; -#endif /* Max extended CPUID function supported: */ __u32 extended_cpuid_level; /* Maximum supported CPUID level, -1=no CPUID: */ -- cgit v1.2.2 From 879d792b66d633bbe466974f61d1acc9aa8c78eb Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 9 Sep 2008 16:40:37 -0700 Subject: x86: let intel 64-bit use intel.c now that arch/x86/kernel/cpu/intel_64.c and arch/x86/kernel/cpu/intel.c are equal, drop arch/x86/kernel/cpu/intel_64.c and fix up the glue. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- include/asm-x86/bugs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/bugs.h b/include/asm-x86/bugs.h index ae514c76a96f..dc604985f2ad 100644 --- a/include/asm-x86/bugs.h +++ b/include/asm-x86/bugs.h @@ -3,7 +3,7 @@ extern void check_bugs(void); -#ifdef CONFIG_CPU_SUP_INTEL_32 +#if defined(CONFIG_CPU_SUP_INTEL) && defined(CONFIG_X86_32) int ppro_with_ram_bug(void); #else static inline int ppro_with_ram_bug(void) { return 0; } -- cgit v1.2.2 From 315a6558f30a264c88274fa70626615d1c7851c7 Mon Sep 17 00:00:00 2001 From: Sheng Yang Date: Tue, 9 Sep 2008 14:54:53 +0800 Subject: x86: move VMX MSRs to msr-index.h They are hardware specific MSRs, and we would use them in virtualization feature detection later. Signed-off-by: Sheng Yang Signed-off-by: Ingo Molnar --- include/asm-x86/msr-index.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/asm-x86') diff --git a/include/asm-x86/msr-index.h b/include/asm-x86/msr-index.h index 3052f058ab06..0bb43301a202 100644 --- a/include/asm-x86/msr-index.h +++ b/include/asm-x86/msr-index.h @@ -176,6 +176,7 @@ #define MSR_IA32_TSC 0x00000010 #define MSR_IA32_PLATFORM_ID 0x00000017 #define MSR_IA32_EBL_CR_POWERON 0x0000002a +#define MSR_IA32_FEATURE_CONTROL 0x0000003a #define MSR_IA32_APICBASE 0x0000001b #define MSR_IA32_APICBASE_BSP (1<<8) @@ -310,4 +311,19 @@ /* Geode defined MSRs */ #define MSR_GEODE_BUSCONT_CONF0 0x00001900 +/* Intel VT MSRs */ +#define MSR_IA32_VMX_BASIC 0x00000480 +#define MSR_IA32_VMX_PINBASED_CTLS 0x00000481 +#define MSR_IA32_VMX_PROCBASED_CTLS 0x00000482 +#define MSR_IA32_VMX_EXIT_CTLS 0x00000483 +#define MSR_IA32_VMX_ENTRY_CTLS 0x00000484 +#define MSR_IA32_VMX_MISC 0x00000485 +#define MSR_IA32_VMX_CR0_FIXED0 0x00000486 +#define MSR_IA32_VMX_CR0_FIXED1 0x00000487 +#define MSR_IA32_VMX_CR4_FIXED0 0x00000488 +#define MSR_IA32_VMX_CR4_FIXED1 0x00000489 +#define MSR_IA32_VMX_VMCS_ENUM 0x0000048a +#define MSR_IA32_VMX_PROCBASED_CTLS2 0x0000048b +#define MSR_IA32_VMX_EPT_VPID_CAP 0x0000048c + #endif /* ASM_X86__MSR_INDEX_H */ -- cgit v1.2.2 From e38e05a85828dac23540cd007df5f20985388afc Mon Sep 17 00:00:00 2001 From: Sheng Yang Date: Wed, 10 Sep 2008 18:53:34 +0800 Subject: x86: extended "flags" to show virtualization HW feature in /proc/cpuinfo The hardware virtualization technology evolves very fast. But currently it's hard to tell if your CPU support a certain kind of HW technology without digging into the source code. The patch add a new catagory in "flags" under /proc/cpuinfo. Now "flags" can indicate the (important) HW virtulization features the CPU supported as well. Current implementation just cover Intel VMX side. Signed-off-by: Sheng Yang Signed-off-by: Ingo Molnar --- include/asm-x86/cpufeature.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'include/asm-x86') diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h index 7ac4d93d20ed..8d45690bef5f 100644 --- a/include/asm-x86/cpufeature.h +++ b/include/asm-x86/cpufeature.h @@ -6,7 +6,7 @@ #include -#define NCAPINTS 8 /* N 32-bit words worth of info */ +#define NCAPINTS 9 /* N 32-bit words worth of info */ /* * Note: If the comment begins with a quoted string, that string is used @@ -150,6 +150,13 @@ */ #define X86_FEATURE_IDA (7*32+ 0) /* Intel Dynamic Acceleration */ +/* Virtualization flags: Linux defined */ +#define X86_FEATURE_TPR_SHADOW (8*32+ 0) /* Intel TPR Shadow */ +#define X86_FEATURE_VNMI (8*32+ 1) /* Intel Virtual NMI */ +#define X86_FEATURE_FLEXPRIORITY (8*32+ 2) /* Intel FlexPriority */ +#define X86_FEATURE_EPT (8*32+ 3) /* Intel Extended Page Table */ +#define X86_FEATURE_VPID (8*32+ 4) /* Intel Virtual Processor ID */ + #if defined(__KERNEL__) && !defined(__ASSEMBLY__) #include -- cgit v1.2.2