From bb8985586b7a906e116db835c64773b7a7d51663 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 17 Aug 2008 21:05:42 -0400 Subject: x86, um: ... and asm-x86 move Signed-off-by: Al Viro Signed-off-by: H. Peter Anvin --- include/asm-x86/mca_dma.h | 201 ---------------------------------------------- 1 file changed, 201 deletions(-) delete mode 100644 include/asm-x86/mca_dma.h (limited to 'include/asm-x86/mca_dma.h') diff --git a/include/asm-x86/mca_dma.h b/include/asm-x86/mca_dma.h deleted file mode 100644 index 49f22be237d2..000000000000 --- a/include/asm-x86/mca_dma.h +++ /dev/null @@ -1,201 +0,0 @@ -#ifndef ASM_X86__MCA_DMA_H -#define ASM_X86__MCA_DMA_H - -#include -#include - -/* - * Microchannel specific DMA stuff. DMA on an MCA machine is fairly similar to - * standard PC dma, but it certainly has its quirks. DMA register addresses - * are in a different place and there are some added functions. Most of this - * should be pretty obvious on inspection. Note that the user must divide - * count by 2 when using 16-bit dma; that is not handled by these functions. - * - * Ramen Noodles are yummy. - * - * 1998 Tymm Twillman - */ - -/* - * Registers that are used by the DMA controller; FN is the function register - * (tell the controller what to do) and EXE is the execution register (how - * to do it) - */ - -#define MCA_DMA_REG_FN 0x18 -#define MCA_DMA_REG_EXE 0x1A - -/* - * Functions that the DMA controller can do - */ - -#define MCA_DMA_FN_SET_IO 0x00 -#define MCA_DMA_FN_SET_ADDR 0x20 -#define MCA_DMA_FN_GET_ADDR 0x30 -#define MCA_DMA_FN_SET_COUNT 0x40 -#define MCA_DMA_FN_GET_COUNT 0x50 -#define MCA_DMA_FN_GET_STATUS 0x60 -#define MCA_DMA_FN_SET_MODE 0x70 -#define MCA_DMA_FN_SET_ARBUS 0x80 -#define MCA_DMA_FN_MASK 0x90 -#define MCA_DMA_FN_RESET_MASK 0xA0 -#define MCA_DMA_FN_MASTER_CLEAR 0xD0 - -/* - * Modes (used by setting MCA_DMA_FN_MODE in the function register) - * - * Note that the MODE_READ is read from memory (write to device), and - * MODE_WRITE is vice-versa. - */ - -#define MCA_DMA_MODE_XFER 0x04 /* read by default */ -#define MCA_DMA_MODE_READ 0x04 /* same as XFER */ -#define MCA_DMA_MODE_WRITE 0x08 /* OR with MODE_XFER to use */ -#define MCA_DMA_MODE_IO 0x01 /* DMA from IO register */ -#define MCA_DMA_MODE_16 0x40 /* 16 bit xfers */ - - -/** - * mca_enable_dma - channel to enable DMA on - * @dmanr: DMA channel - * - * Enable the MCA bus DMA on a channel. This can be called from - * IRQ context. - */ - -static inline void mca_enable_dma(unsigned int dmanr) -{ - outb(MCA_DMA_FN_RESET_MASK | dmanr, MCA_DMA_REG_FN); -} - -/** - * mca_disble_dma - channel to disable DMA on - * @dmanr: DMA channel - * - * Enable the MCA bus DMA on a channel. This can be called from - * IRQ context. - */ - -static inline void mca_disable_dma(unsigned int dmanr) -{ - outb(MCA_DMA_FN_MASK | dmanr, MCA_DMA_REG_FN); -} - -/** - * mca_set_dma_addr - load a 24bit DMA address - * @dmanr: DMA channel - * @a: 24bit bus address - * - * Load the address register in the DMA controller. This has a 24bit - * limitation (16Mb). - */ - -static inline void mca_set_dma_addr(unsigned int dmanr, unsigned int a) -{ - outb(MCA_DMA_FN_SET_ADDR | dmanr, MCA_DMA_REG_FN); - outb(a & 0xff, MCA_DMA_REG_EXE); - outb((a >> 8) & 0xff, MCA_DMA_REG_EXE); - outb((a >> 16) & 0xff, MCA_DMA_REG_EXE); -} - -/** - * mca_get_dma_addr - load a 24bit DMA address - * @dmanr: DMA channel - * - * Read the address register in the DMA controller. This has a 24bit - * limitation (16Mb). The return is a bus address. - */ - -static inline unsigned int mca_get_dma_addr(unsigned int dmanr) -{ - unsigned int addr; - - outb(MCA_DMA_FN_GET_ADDR | dmanr, MCA_DMA_REG_FN); - addr = inb(MCA_DMA_REG_EXE); - addr |= inb(MCA_DMA_REG_EXE) << 8; - addr |= inb(MCA_DMA_REG_EXE) << 16; - - return addr; -} - -/** - * mca_set_dma_count - load a 16bit transfer count - * @dmanr: DMA channel - * @count: count - * - * Set the DMA count for this channel. This can be up to 64Kbytes. - * Setting a count of zero will not do what you expect. - */ - -static inline void mca_set_dma_count(unsigned int dmanr, unsigned int count) -{ - count--; /* transfers one more than count -- correct for this */ - - outb(MCA_DMA_FN_SET_COUNT | dmanr, MCA_DMA_REG_FN); - outb(count & 0xff, MCA_DMA_REG_EXE); - outb((count >> 8) & 0xff, MCA_DMA_REG_EXE); -} - -/** - * mca_get_dma_residue - get the remaining bytes to transfer - * @dmanr: DMA channel - * - * This function returns the number of bytes left to transfer - * on this DMA channel. - */ - -static inline unsigned int mca_get_dma_residue(unsigned int dmanr) -{ - unsigned short count; - - outb(MCA_DMA_FN_GET_COUNT | dmanr, MCA_DMA_REG_FN); - count = 1 + inb(MCA_DMA_REG_EXE); - count += inb(MCA_DMA_REG_EXE) << 8; - - return count; -} - -/** - * mca_set_dma_io - set the port for an I/O transfer - * @dmanr: DMA channel - * @io_addr: an I/O port number - * - * Unlike the ISA bus DMA controllers the DMA on MCA bus can transfer - * with an I/O port target. - */ - -static inline void mca_set_dma_io(unsigned int dmanr, unsigned int io_addr) -{ - /* - * DMA from a port address -- set the io address - */ - - outb(MCA_DMA_FN_SET_IO | dmanr, MCA_DMA_REG_FN); - outb(io_addr & 0xff, MCA_DMA_REG_EXE); - outb((io_addr >> 8) & 0xff, MCA_DMA_REG_EXE); -} - -/** - * mca_set_dma_mode - set the DMA mode - * @dmanr: DMA channel - * @mode: mode to set - * - * The DMA controller supports several modes. The mode values you can - * set are- - * - * %MCA_DMA_MODE_READ when reading from the DMA device. - * - * %MCA_DMA_MODE_WRITE to writing to the DMA device. - * - * %MCA_DMA_MODE_IO to do DMA to or from an I/O port. - * - * %MCA_DMA_MODE_16 to do 16bit transfers. - */ - -static inline void mca_set_dma_mode(unsigned int dmanr, unsigned int mode) -{ - outb(MCA_DMA_FN_SET_MODE | dmanr, MCA_DMA_REG_FN); - outb(mode, MCA_DMA_REG_EXE); -} - -#endif /* ASM_X86__MCA_DMA_H */ -- cgit v1.2.2