From a14a26aca610bbd09fb62fb9fd5dbf6b41321972 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:13:29 +0100 Subject: [ARM] 4515/1: S3C: Move uncompress code to plat-s3c Move the uncompress.h to plat-s3c Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/uncompress.h | 142 +++--------------------------- 1 file changed, 11 insertions(+), 131 deletions(-) (limited to 'include/asm-arm/arch-s3c2410/uncompress.h') diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h index d78f3dca7d7e..22328b70ba5d 100644 --- a/include/asm-arm/arch-s3c2410/uncompress.h +++ b/include/asm-arm/arch-s3c2410/uncompress.h @@ -13,153 +13,33 @@ #ifndef __ASM_ARCH_UNCOMPRESS_H #define __ASM_ARCH_UNCOMPRESS_H -typedef unsigned int upf_t; /* cannot include linux/serial_core.h */ - -/* defines for UART registers */ -#include "asm/plat-s3c/regs-serial.h" -#include "asm/arch/regs-gpio.h" -#include "asm/plat-s3c/regs-watchdog.h" - +#include #include /* working in physical space... */ #undef S3C2410_GPIOREG -#undef S3C2410_WDOGREG - #define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x))) -#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x))) + +#include /* how many bytes we allow into the FIFO at a time in FIFO mode */ #define FIFO_MAX (14) -#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT) - -static __inline__ void -uart_wr(unsigned int reg, unsigned int val) -{ - volatile unsigned int *ptr; - - ptr = (volatile unsigned int *)(reg + uart_base); - *ptr = val; -} - -static __inline__ unsigned int -uart_rd(unsigned int reg) -{ - volatile unsigned int *ptr; - - ptr = (volatile unsigned int *)(reg + uart_base); - return *ptr; -} - - -/* we can deal with the case the UARTs are being run - * in FIFO mode, so that we don't hold up our execution - * waiting for tx to happen... -*/ - -static void putc(int ch) +static void arch_detect_cpu(void) { - int cpuid = S3C2410_GSTATUS1_2410; + unsigned int cpuid; -#ifndef CONFIG_CPU_S3C2400 cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1); cpuid &= S3C2410_GSTATUS1_IDMASK; -#endif - - if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) { - int level; - - while (1) { - level = uart_rd(S3C2410_UFSTAT); - - if (cpuid == S3C2410_GSTATUS1_2440 || - cpuid == S3C2410_GSTATUS1_2442) { - level &= S3C2440_UFSTAT_TXMASK; - level >>= S3C2440_UFSTAT_TXSHIFT; - } else { - level &= S3C2410_UFSTAT_TXMASK; - level >>= S3C2410_UFSTAT_TXSHIFT; - } - - if (level < FIFO_MAX) - break; - } + if (cpuid == S3C2410_GSTATUS1_2440 || + cpuid == S3C2410_GSTATUS1_2442) { + fifo_mask = S3C2440_UFSTAT_TXMASK; + fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT; } else { - /* not using fifos */ - - while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE) - barrier(); + fifo_mask = S3C2410_UFSTAT_TXMASK; + fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT; } - - /* write byte to transmission register */ - uart_wr(S3C2410_UTXH, ch); -} - -static inline void flush(void) -{ } -#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0) - -/* CONFIG_S3C2410_BOOT_WATCHDOG - * - * Simple boot-time watchdog setup, to reboot the system if there is - * any problem with the boot process -*/ - -#ifdef CONFIG_S3C2410_BOOT_WATCHDOG - -#define WDOG_COUNT (0xff00) - -static inline void arch_decomp_wdog(void) -{ - __raw_writel(WDOG_COUNT, S3C2410_WTCNT); -} - -static void arch_decomp_wdog_start(void) -{ - __raw_writel(WDOG_COUNT, S3C2410_WTDAT); - __raw_writel(WDOG_COUNT, S3C2410_WTCNT); - __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON); -} - -#else -#define arch_decomp_wdog_start() -#define arch_decomp_wdog() -#endif - -#ifdef CONFIG_S3C2410_BOOT_ERROR_RESET - -static void arch_decomp_error(const char *x) -{ - putstr("\n\n"); - putstr(x); - putstr("\n\n -- System resetting\n"); - - __raw_writel(0x4000, S3C2410_WTDAT); - __raw_writel(0x4000, S3C2410_WTCNT); - __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON); - - while(1); -} - -#define arch_error arch_decomp_error -#endif - -static void error(char *err); - -static void -arch_decomp_setup(void) -{ - /* we may need to setup the uart(s) here if we are not running - * on an BAST... the BAST will have left the uarts configured - * after calling linux. - */ - - arch_decomp_wdog_start(); -} - - #endif /* __ASM_ARCH_UNCOMPRESS_H */ -- cgit v1.2.2