From 0aea1fd565857f002e873a506d67c92ff913f1af Mon Sep 17 00:00:00 2001 From: eric miao Date: Wed, 21 Nov 2007 16:57:12 +0800 Subject: [ARM] pxa: move SSP register definitions from pxa-regs.h to regs-ssp.h Signed-off-by: eric miao Signed-off-by: Russell King --- include/asm-arm/arch-pxa/regs-ssp.h | 173 ++++++++++++++++++++++++++++++++++++ 1 file changed, 173 insertions(+) create mode 100644 include/asm-arm/arch-pxa/regs-ssp.h (limited to 'include/asm-arm/arch-pxa/regs-ssp.h') diff --git a/include/asm-arm/arch-pxa/regs-ssp.h b/include/asm-arm/arch-pxa/regs-ssp.h new file mode 100644 index 000000000000..687ade109113 --- /dev/null +++ b/include/asm-arm/arch-pxa/regs-ssp.h @@ -0,0 +1,173 @@ +#ifndef __ASM_ARCH_REGS_SSP_H +#define __ASM_ARCH_REGS_SSP_H + +/* + * SSP Serial Port Registers + * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different. + * PXA255, PXA26x and PXA27x have extra ports, registers and bits. + */ + + /* Common PXA2xx bits first */ +#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */ +#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */ +#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */ +#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */ +#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */ +#define SSCR0_National (0x2 << 4) /* National Microwire */ +#define SSCR0_ECS (1 << 6) /* External clock select */ +#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */ +#if defined(CONFIG_PXA25x) +#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */ +#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */ +#elif defined(CONFIG_PXA27x) +#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */ +#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */ +#define SSCR0_EDSS (1 << 20) /* Extended data size select */ +#define SSCR0_NCS (1 << 21) /* Network clock select */ +#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */ +#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ +#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ +#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */ +#define SSCR0_ADC (1 << 30) /* Audio clock select */ +#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ +#endif + +#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ +#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ +#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */ +#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */ +#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ +#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ +#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */ +#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */ +#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */ +#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */ + +#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */ +#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */ +#define SSSR_BSY (1 << 4) /* SSP Busy */ +#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */ +#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ +#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ + +#define SSCR0_TIM (1 << 23) /* Transmit FIFO Under Run Interrupt Mask */ +#define SSCR0_RIM (1 << 22) /* Receive FIFO Over Run interrupt Mask */ +#define SSCR0_NCS (1 << 21) /* Network Clock Select */ +#define SSCR0_EDSS (1 << 20) /* Extended Data Size Select */ + +/* extra bits in PXA255, PXA26x and PXA27x SSP ports */ +#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */ +#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */ +#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */ +#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */ +#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */ +#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */ +#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */ +#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */ +#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */ +#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */ +#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */ +#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */ +#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */ +#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */ +#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */ +#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interupt Enable */ +#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */ +#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */ + +#define SSSR_BCE (1 << 23) /* Bit Count Error */ +#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */ +#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */ +#define SSSR_EOC (1 << 20) /* End Of Chain */ +#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ +#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ + +#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ +#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ +#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ +#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ +#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ +#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ +#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ +#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ +#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */ + +#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */ +#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ +#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ + +#define SSCR0_P1 __REG(0x41000000) /* SSP Port 1 Control Register 0 */ +#define SSCR1_P1 __REG(0x41000004) /* SSP Port 1 Control Register 1 */ +#define SSSR_P1 __REG(0x41000008) /* SSP Port 1 Status Register */ +#define SSITR_P1 __REG(0x4100000C) /* SSP Port 1 Interrupt Test Register */ +#define SSDR_P1 __REG(0x41000010) /* (Write / Read) SSP Port 1 Data Write Register/SSP Data Read Register */ + +/* Support existing PXA25x drivers */ +#define SSCR0 SSCR0_P1 /* SSP Control Register 0 */ +#define SSCR1 SSCR1_P1 /* SSP Control Register 1 */ +#define SSSR SSSR_P1 /* SSP Status Register */ +#define SSITR SSITR_P1 /* SSP Interrupt Test Register */ +#define SSDR SSDR_P1 /* (Write / Read) SSP Data Write Register/SSP Data Read Register */ + +/* PXA27x ports */ +#if defined (CONFIG_PXA27x) +#define SSTO_P1 __REG(0x41000028) /* SSP Port 1 Time Out Register */ +#define SSPSP_P1 __REG(0x4100002C) /* SSP Port 1 Programmable Serial Protocol */ +#define SSTSA_P1 __REG(0x41000030) /* SSP Port 1 Tx Timeslot Active */ +#define SSRSA_P1 __REG(0x41000034) /* SSP Port 1 Rx Timeslot Active */ +#define SSTSS_P1 __REG(0x41000038) /* SSP Port 1 Timeslot Status */ +#define SSACD_P1 __REG(0x4100003C) /* SSP Port 1 Audio Clock Divider */ +#define SSCR0_P2 __REG(0x41700000) /* SSP Port 2 Control Register 0 */ +#define SSCR1_P2 __REG(0x41700004) /* SSP Port 2 Control Register 1 */ +#define SSSR_P2 __REG(0x41700008) /* SSP Port 2 Status Register */ +#define SSITR_P2 __REG(0x4170000C) /* SSP Port 2 Interrupt Test Register */ +#define SSDR_P2 __REG(0x41700010) /* (Write / Read) SSP Port 2 Data Write Register/SSP Data Read Register */ +#define SSTO_P2 __REG(0x41700028) /* SSP Port 2 Time Out Register */ +#define SSPSP_P2 __REG(0x4170002C) /* SSP Port 2 Programmable Serial Protocol */ +#define SSTSA_P2 __REG(0x41700030) /* SSP Port 2 Tx Timeslot Active */ +#define SSRSA_P2 __REG(0x41700034) /* SSP Port 2 Rx Timeslot Active */ +#define SSTSS_P2 __REG(0x41700038) /* SSP Port 2 Timeslot Status */ +#define SSACD_P2 __REG(0x4170003C) /* SSP Port 2 Audio Clock Divider */ +#define SSCR0_P3 __REG(0x41900000) /* SSP Port 3 Control Register 0 */ +#define SSCR1_P3 __REG(0x41900004) /* SSP Port 3 Control Register 1 */ +#define SSSR_P3 __REG(0x41900008) /* SSP Port 3 Status Register */ +#define SSITR_P3 __REG(0x4190000C) /* SSP Port 3 Interrupt Test Register */ +#define SSDR_P3 __REG(0x41900010) /* (Write / Read) SSP Port 3 Data Write Register/SSP Data Read Register */ +#define SSTO_P3 __REG(0x41900028) /* SSP Port 3 Time Out Register */ +#define SSPSP_P3 __REG(0x4190002C) /* SSP Port 3 Programmable Serial Protocol */ +#define SSTSA_P3 __REG(0x41900030) /* SSP Port 3 Tx Timeslot Active */ +#define SSRSA_P3 __REG(0x41900034) /* SSP Port 3 Rx Timeslot Active */ +#define SSTSS_P3 __REG(0x41900038) /* SSP Port 3 Timeslot Status */ +#define SSACD_P3 __REG(0x4190003C) /* SSP Port 3 Audio Clock Divider */ +#else /* PXA255 (only port 2) and PXA26x ports*/ +#define SSTO_P1 __REG(0x41000028) /* SSP Port 1 Time Out Register */ +#define SSPSP_P1 __REG(0x4100002C) /* SSP Port 1 Programmable Serial Protocol */ +#define SSCR0_P2 __REG(0x41400000) /* SSP Port 2 Control Register 0 */ +#define SSCR1_P2 __REG(0x41400004) /* SSP Port 2 Control Register 1 */ +#define SSSR_P2 __REG(0x41400008) /* SSP Port 2 Status Register */ +#define SSITR_P2 __REG(0x4140000C) /* SSP Port 2 Interrupt Test Register */ +#define SSDR_P2 __REG(0x41400010) /* (Write / Read) SSP Port 2 Data Write Register/SSP Data Read Register */ +#define SSTO_P2 __REG(0x41400028) /* SSP Port 2 Time Out Register */ +#define SSPSP_P2 __REG(0x4140002C) /* SSP Port 2 Programmable Serial Protocol */ +#define SSCR0_P3 __REG(0x41500000) /* SSP Port 3 Control Register 0 */ +#define SSCR1_P3 __REG(0x41500004) /* SSP Port 3 Control Register 1 */ +#define SSSR_P3 __REG(0x41500008) /* SSP Port 3 Status Register */ +#define SSITR_P3 __REG(0x4150000C) /* SSP Port 3 Interrupt Test Register */ +#define SSDR_P3 __REG(0x41500010) /* (Write / Read) SSP Port 3 Data Write Register/SSP Data Read Register */ +#define SSTO_P3 __REG(0x41500028) /* SSP Port 3 Time Out Register */ +#define SSPSP_P3 __REG(0x4150002C) /* SSP Port 3 Programmable Serial Protocol */ +#endif + +#define SSCR0_P(x) (*(((x) == 1) ? &SSCR0_P1 : ((x) == 2) ? &SSCR0_P2 : ((x) == 3) ? &SSCR0_P3 : NULL)) +#define SSCR1_P(x) (*(((x) == 1) ? &SSCR1_P1 : ((x) == 2) ? &SSCR1_P2 : ((x) == 3) ? &SSCR1_P3 : NULL)) +#define SSSR_P(x) (*(((x) == 1) ? &SSSR_P1 : ((x) == 2) ? &SSSR_P2 : ((x) == 3) ? &SSSR_P3 : NULL)) +#define SSITR_P(x) (*(((x) == 1) ? &SSITR_P1 : ((x) == 2) ? &SSITR_P2 : ((x) == 3) ? &SSITR_P3 : NULL)) +#define SSDR_P(x) (*(((x) == 1) ? &SSDR_P1 : ((x) == 2) ? &SSDR_P2 : ((x) == 3) ? &SSDR_P3 : NULL)) +#define SSTO_P(x) (*(((x) == 1) ? &SSTO_P1 : ((x) == 2) ? &SSTO_P2 : ((x) == 3) ? &SSTO_P3 : NULL)) +#define SSPSP_P(x) (*(((x) == 1) ? &SSPSP_P1 : ((x) == 2) ? &SSPSP_P2 : ((x) == 3) ? &SSPSP_P3 : NULL)) +#define SSTSA_P(x) (*(((x) == 1) ? &SSTSA_P1 : ((x) == 2) ? &SSTSA_P2 : ((x) == 3) ? &SSTSA_P3 : NULL)) +#define SSRSA_P(x) (*(((x) == 1) ? &SSRSA_P1 : ((x) == 2) ? &SSRSA_P2 : ((x) == 3) ? &SSRSA_P3 : NULL)) +#define SSTSS_P(x) (*(((x) == 1) ? &SSTSS_P1 : ((x) == 2) ? &SSTSS_P2 : ((x) == 3) ? &SSTSS_P3 : NULL)) +#define SSACD_P(x) (*(((x) == 1) ? &SSACD_P1 : ((x) == 2) ? &SSACD_P2 : ((x) == 3) ? &SSACD_P3 : NULL)) + +#endif /* __ASM_ARCH_REGS_SSP_H */ -- cgit v1.2.2