From cc33412fb1f11613e20f9dfc2919a77ecd63fbc4 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 12 Jan 2009 17:23:05 +0100 Subject: quota: Improve locking We implement dqget() and dqput() that need neither dqonoff_mutex nor dqptr_sem. Then move dqget() and dqput() calls so that they are not called from under dqptr_sem. This is important because filesystem callbacks aren't called from under dqptr_sem which used to cause *lots* of problems with lock ranking (and with OCFS2 they became close to unsolvable). The patch also removes two functions which were introduced solely because OCFS2 needed them to cope with the old locking scheme. As time showed, they were not enough for OCFS2 anyway and it would be unnecessary work to adapt them to the new locking scheme in which they aren't needed. As a result OCFS2 needs the following patch to compile properly with quotas. Sorry to any bisecters which hit this in advance. Signed-off-by: Jan Kara --- fs/dquot.c | 218 ++++++++++++++++++++++++++++++++++--------------------------- 1 file changed, 122 insertions(+), 96 deletions(-) (limited to 'fs') diff --git a/fs/dquot.c b/fs/dquot.c index 48c0571f831d..bca3cac4bee7 100644 --- a/fs/dquot.c +++ b/fs/dquot.c @@ -87,14 +87,17 @@ #define __DQUOT_PARANOIA /* - * There are two quota SMP locks. dq_list_lock protects all lists with quotas - * and quota formats and also dqstats structure containing statistics about the - * lists. dq_data_lock protects data from dq_dqb and also mem_dqinfo structures - * and also guards consistency of dquot->dq_dqb with inode->i_blocks, i_bytes. + * There are three quota SMP locks. dq_list_lock protects all lists with quotas + * and quota formats, dqstats structure containing statistics about the lists + * dq_data_lock protects data from dq_dqb and also mem_dqinfo structures and + * also guards consistency of dquot->dq_dqb with inode->i_blocks, i_bytes. * i_blocks and i_bytes updates itself are guarded by i_lock acquired directly - * in inode_add_bytes() and inode_sub_bytes(). + * in inode_add_bytes() and inode_sub_bytes(). dq_state_lock protects + * modifications of quota state (on quotaon and quotaoff) and readers who care + * about latest values take it as well. * - * The spinlock ordering is hence: dq_data_lock > dq_list_lock > i_lock + * The spinlock ordering is hence: dq_data_lock > dq_list_lock > i_lock, + * dq_list_lock > dq_state_lock * * Note that some things (eg. sb pointer, type, id) doesn't change during * the life of the dquot structure and so needn't to be protected by a lock @@ -103,12 +106,7 @@ * operation is just reading pointers from inode (or not using them at all) the * read lock is enough. If pointers are altered function must hold write lock * (these locking rules also apply for S_NOQUOTA flag in the inode - note that - * for altering the flag i_mutex is also needed). If operation is holding - * reference to dquot in other way (e.g. quotactl ops) it must be guarded by - * dqonoff_mutex. - * This locking assures that: - * a) update/access to dquot pointers in inode is serialized - * b) everyone is guarded against invalidate_dquots() + * for altering the flag i_mutex is also needed). * * Each dquot has its dq_lock mutex. Locked dquots might not be referenced * from inodes (dquot_alloc_space() and such don't check the dq_lock). @@ -122,10 +120,17 @@ * Lock ordering (including related VFS locks) is the following: * i_mutex > dqonoff_sem > journal_lock > dqptr_sem > dquot->dq_lock > * dqio_mutex + * The lock ordering of dqptr_sem imposed by quota code is only dqonoff_sem > + * dqptr_sem. But filesystem has to count with the fact that functions such as + * dquot_alloc_space() acquire dqptr_sem and they usually have to be called + * from inside a transaction to keep filesystem consistency after a crash. Also + * filesystems usually want to do some IO on dquot from ->mark_dirty which is + * called with dqptr_sem held. * i_mutex on quota files is special (it's below dqio_mutex) */ static DEFINE_SPINLOCK(dq_list_lock); +static DEFINE_SPINLOCK(dq_state_lock); DEFINE_SPINLOCK(dq_data_lock); static char *quotatypes[] = INITQFNAMES; @@ -428,7 +433,7 @@ static inline void do_destroy_dquot(struct dquot *dquot) * quota is disabled and pointers from inodes removed so there cannot be new * quota users. There can still be some users of quotas due to inodes being * just deleted or pruned by prune_icache() (those are not attached to any - * list). We have to wait for such users. + * list) or parallel quotactl call. We have to wait for such users. */ static void invalidate_dquots(struct super_block *sb, int type) { @@ -600,7 +605,6 @@ static struct shrinker dqcache_shrinker = { /* * Put reference to dquot * NOTE: If you change this function please check whether dqput_blocks() works right... - * MUST be called with either dqptr_sem or dqonoff_mutex held */ void dqput(struct dquot *dquot) { @@ -696,37 +700,31 @@ static struct dquot *get_empty_dquot(struct super_block *sb, int type) return dquot; } -/* - * Check whether dquot is in memory. - * MUST be called with either dqptr_sem or dqonoff_mutex held - */ -int dquot_is_cached(struct super_block *sb, unsigned int id, int type) -{ - unsigned int hashent = hashfn(sb, id, type); - int ret = 0; - - if (!sb_has_quota_active(sb, type)) - return 0; - spin_lock(&dq_list_lock); - if (find_dquot(hashent, sb, id, type) != NODQUOT) - ret = 1; - spin_unlock(&dq_list_lock); - return ret; -} - /* * Get reference to dquot - * MUST be called with either dqptr_sem or dqonoff_mutex held + * + * Locking is slightly tricky here. We are guarded from parallel quotaoff() + * destroying our dquot by: + * a) checking for quota flags under dq_list_lock and + * b) getting a reference to dquot before we release dq_list_lock */ struct dquot *dqget(struct super_block *sb, unsigned int id, int type) { unsigned int hashent = hashfn(sb, id, type); - struct dquot *dquot, *empty = NODQUOT; + struct dquot *dquot = NODQUOT, *empty = NODQUOT; if (!sb_has_quota_active(sb, type)) return NODQUOT; we_slept: spin_lock(&dq_list_lock); + spin_lock(&dq_state_lock); + if (!sb_has_quota_active(sb, type)) { + spin_unlock(&dq_state_lock); + spin_unlock(&dq_list_lock); + goto out; + } + spin_unlock(&dq_state_lock); + if ((dquot = find_dquot(hashent, sb, id, type)) == NODQUOT) { if (empty == NODQUOT) { spin_unlock(&dq_list_lock); @@ -735,6 +733,7 @@ we_slept: goto we_slept; } dquot = empty; + empty = NODQUOT; dquot->dq_id = id; /* all dquots go on the inuse_list */ put_inuse(dquot); @@ -749,8 +748,6 @@ we_slept: dqstats.cache_hits++; dqstats.lookups++; spin_unlock(&dq_list_lock); - if (empty) - do_destroy_dquot(empty); } /* Wait for dq_lock - after this we know that either dquot_release() is already * finished or it will be canceled due to dq_count > 1 test */ @@ -758,11 +755,15 @@ we_slept: /* Read the dquot and instantiate it (everything done only if needed) */ if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags) && sb->dq_op->acquire_dquot(dquot) < 0) { dqput(dquot); - return NODQUOT; + dquot = NODQUOT; + goto out; } #ifdef __DQUOT_PARANOIA BUG_ON(!dquot->dq_sb); /* Has somebody invalidated entry under us? */ #endif +out: + if (empty) + do_destroy_dquot(empty); return dquot; } @@ -1198,63 +1199,76 @@ static int info_bdq_free(struct dquot *dquot, qsize_t space) } /* * Initialize quota pointers in inode - * Transaction must be started at entry + * We do things in a bit complicated way but by that we avoid calling + * dqget() and thus filesystem callbacks under dqptr_sem. */ int dquot_initialize(struct inode *inode, int type) { unsigned int id = 0; int cnt, ret = 0; + struct dquot *got[MAXQUOTAS] = { NODQUOT, NODQUOT }; + struct super_block *sb = inode->i_sb; /* First test before acquiring mutex - solves deadlocks when we * re-enter the quota code and are already holding the mutex */ if (IS_NOQUOTA(inode)) return 0; - down_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + + /* First get references to structures we might need. */ + for (cnt = 0; cnt < MAXQUOTAS; cnt++) { + if (type != -1 && cnt != type) + continue; + switch (cnt) { + case USRQUOTA: + id = inode->i_uid; + break; + case GRPQUOTA: + id = inode->i_gid; + break; + } + got[cnt] = dqget(sb, id, cnt); + } + + down_write(&sb_dqopt(sb)->dqptr_sem); /* Having dqptr_sem we know NOQUOTA flags can't be altered... */ if (IS_NOQUOTA(inode)) goto out_err; for (cnt = 0; cnt < MAXQUOTAS; cnt++) { if (type != -1 && cnt != type) continue; + /* Avoid races with quotaoff() */ + if (!sb_has_quota_active(sb, cnt)) + continue; if (inode->i_dquot[cnt] == NODQUOT) { - switch (cnt) { - case USRQUOTA: - id = inode->i_uid; - break; - case GRPQUOTA: - id = inode->i_gid; - break; - } - inode->i_dquot[cnt] = dqget(inode->i_sb, id, cnt); + inode->i_dquot[cnt] = got[cnt]; + got[cnt] = NODQUOT; } } out_err: - up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + up_write(&sb_dqopt(sb)->dqptr_sem); + /* Drop unused references */ + for (cnt = 0; cnt < MAXQUOTAS; cnt++) + dqput(got[cnt]); return ret; } /* * Release all quotas referenced by inode - * Transaction must be started at an entry */ -int dquot_drop_locked(struct inode *inode) +int dquot_drop(struct inode *inode) { int cnt; + struct dquot *put[MAXQUOTAS]; + down_write(&sb_dqopt(inode->i_sb)->dqptr_sem); for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - if (inode->i_dquot[cnt] != NODQUOT) { - dqput(inode->i_dquot[cnt]); - inode->i_dquot[cnt] = NODQUOT; - } + put[cnt] = inode->i_dquot[cnt]; + inode->i_dquot[cnt] = NODQUOT; } - return 0; -} - -int dquot_drop(struct inode *inode) -{ - down_write(&sb_dqopt(inode->i_sb)->dqptr_sem); - dquot_drop_locked(inode); up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + + for (cnt = 0; cnt < MAXQUOTAS; cnt++) + dqput(put[cnt]); return 0; } @@ -1470,8 +1484,9 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr) qsize_t space; struct dquot *transfer_from[MAXQUOTAS]; struct dquot *transfer_to[MAXQUOTAS]; - int cnt, ret = NO_QUOTA, chuid = (iattr->ia_valid & ATTR_UID) && inode->i_uid != iattr->ia_uid, - chgid = (iattr->ia_valid & ATTR_GID) && inode->i_gid != iattr->ia_gid; + int cnt, ret = QUOTA_OK; + int chuid = iattr->ia_valid & ATTR_UID && inode->i_uid != iattr->ia_uid, + chgid = iattr->ia_valid & ATTR_GID && inode->i_gid != iattr->ia_gid; char warntype_to[MAXQUOTAS]; char warntype_from_inodes[MAXQUOTAS], warntype_from_space[MAXQUOTAS]; @@ -1479,21 +1494,11 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr) * re-enter the quota code and are already holding the mutex */ if (IS_NOQUOTA(inode)) return QUOTA_OK; - /* Clear the arrays */ + /* Initialize the arrays */ for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - transfer_to[cnt] = transfer_from[cnt] = NODQUOT; + transfer_from[cnt] = NODQUOT; + transfer_to[cnt] = NODQUOT; warntype_to[cnt] = QUOTA_NL_NOWARN; - } - down_write(&sb_dqopt(inode->i_sb)->dqptr_sem); - /* Now recheck reliably when holding dqptr_sem */ - if (IS_NOQUOTA(inode)) { /* File without quota accounting? */ - up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); - return QUOTA_OK; - } - /* First build the transfer_to list - here we can block on - * reading/instantiating of dquots. We know that the transaction for - * us was already started so we don't violate lock ranking here */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) { switch (cnt) { case USRQUOTA: if (!chuid) @@ -1507,6 +1512,13 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr) break; } } + + down_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + /* Now recheck reliably when holding dqptr_sem */ + if (IS_NOQUOTA(inode)) { /* File without quota accounting? */ + up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + goto put_all; + } spin_lock(&dq_data_lock); space = inode_get_bytes(inode); /* Build the transfer_from list and check the limits */ @@ -1517,7 +1529,7 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr) if (check_idq(transfer_to[cnt], 1, warntype_to + cnt) == NO_QUOTA || check_bdq(transfer_to[cnt], space, 0, warntype_to + cnt) == NO_QUOTA) - goto warn_put_all; + goto over_quota; } /* @@ -1545,28 +1557,37 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr) inode->i_dquot[cnt] = transfer_to[cnt]; } - ret = QUOTA_OK; -warn_put_all: spin_unlock(&dq_data_lock); + up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + /* Dirtify all the dquots - this can block when journalling */ for (cnt = 0; cnt < MAXQUOTAS; cnt++) { if (transfer_from[cnt]) mark_dquot_dirty(transfer_from[cnt]); - if (transfer_to[cnt]) + if (transfer_to[cnt]) { mark_dquot_dirty(transfer_to[cnt]); + /* The reference we got is transferred to the inode */ + transfer_to[cnt] = NODQUOT; + } } +warn_put_all: flush_warnings(transfer_to, warntype_to); flush_warnings(transfer_from, warntype_from_inodes); flush_warnings(transfer_from, warntype_from_space); - +put_all: for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - if (ret == QUOTA_OK && transfer_from[cnt] != NODQUOT) - dqput(transfer_from[cnt]); - if (ret == NO_QUOTA && transfer_to[cnt] != NODQUOT) - dqput(transfer_to[cnt]); + dqput(transfer_from[cnt]); + dqput(transfer_to[cnt]); } - up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); return ret; +over_quota: + spin_unlock(&dq_data_lock); + up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + /* Clear dquot pointers we don't want to dqput() */ + for (cnt = 0; cnt < MAXQUOTAS; cnt++) + transfer_from[cnt] = NODQUOT; + ret = NO_QUOTA; + goto warn_put_all; } /* Wrapper for transferring ownership of an inode */ @@ -1651,19 +1672,24 @@ int vfs_quota_disable(struct super_block *sb, int type, unsigned int flags) continue; if (flags & DQUOT_SUSPENDED) { + spin_lock(&dq_state_lock); dqopt->flags |= dquot_state_flag(DQUOT_SUSPENDED, cnt); + spin_unlock(&dq_state_lock); } else { + spin_lock(&dq_state_lock); dqopt->flags &= ~dquot_state_flag(flags, cnt); /* Turning off suspended quotas? */ if (!sb_has_quota_loaded(sb, cnt) && sb_has_quota_suspended(sb, cnt)) { dqopt->flags &= ~dquot_state_flag( DQUOT_SUSPENDED, cnt); + spin_unlock(&dq_state_lock); iput(dqopt->files[cnt]); dqopt->files[cnt] = NULL; continue; } + spin_unlock(&dq_state_lock); } /* We still have to keep quota loaded? */ @@ -1830,7 +1856,9 @@ static int vfs_load_quota_inode(struct inode *inode, int type, int format_id, } mutex_unlock(&dqopt->dqio_mutex); mutex_unlock(&inode->i_mutex); + spin_lock(&dq_state_lock); dqopt->flags |= dquot_state_flag(flags, type); + spin_unlock(&dq_state_lock); add_dquot_ref(sb, type); mutex_unlock(&dqopt->dqonoff_mutex); @@ -1872,9 +1900,11 @@ static int vfs_quota_on_remount(struct super_block *sb, int type) } inode = dqopt->files[type]; dqopt->files[type] = NULL; + spin_lock(&dq_state_lock); flags = dqopt->flags & dquot_state_flag(DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED, type); dqopt->flags &= ~dquot_state_flag(DQUOT_STATE_FLAGS, type); + spin_unlock(&dq_state_lock); mutex_unlock(&dqopt->dqonoff_mutex); flags = dquot_generic_flag(flags, type); @@ -1952,7 +1982,9 @@ int vfs_quota_enable(struct inode *inode, int type, int format_id, ret = -EBUSY; goto out_lock; } + spin_lock(&dq_state_lock); sb_dqopt(sb)->flags |= dquot_state_flag(flags, type); + spin_unlock(&dq_state_lock); out_lock: mutex_unlock(&dqopt->dqonoff_mutex); return ret; @@ -2039,14 +2071,12 @@ int vfs_get_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *d { struct dquot *dquot; - mutex_lock(&sb_dqopt(sb)->dqonoff_mutex); - if (!(dquot = dqget(sb, id, type))) { - mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex); + dquot = dqget(sb, id, type); + if (dquot == NODQUOT) return -ESRCH; - } do_get_dqblk(dquot, di); dqput(dquot); - mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex); + return 0; } @@ -2130,7 +2160,6 @@ int vfs_set_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *d struct dquot *dquot; int rc; - mutex_lock(&sb_dqopt(sb)->dqonoff_mutex); dquot = dqget(sb, id, type); if (!dquot) { rc = -ESRCH; @@ -2139,7 +2168,6 @@ int vfs_set_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *d rc = do_set_dqblk(dquot, di); dqput(dquot); out: - mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex); return rc; } @@ -2370,11 +2398,9 @@ EXPORT_SYMBOL(dquot_release); EXPORT_SYMBOL(dquot_mark_dquot_dirty); EXPORT_SYMBOL(dquot_initialize); EXPORT_SYMBOL(dquot_drop); -EXPORT_SYMBOL(dquot_drop_locked); EXPORT_SYMBOL(vfs_dq_drop); EXPORT_SYMBOL(dqget); EXPORT_SYMBOL(dqput); -EXPORT_SYMBOL(dquot_is_cached); EXPORT_SYMBOL(dquot_alloc_space); EXPORT_SYMBOL(dquot_alloc_inode); EXPORT_SYMBOL(dquot_free_space); -- cgit v1.2.2 From ab596ad8972f314ace538799734c7e1bdd1da2ff Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 19 Jan 2009 02:02:57 +0100 Subject: xfs: fix dentry aliasing issues in open_by_handle Open by handle just grabs an inode by handle and then creates itself a dentry for it. While this works for regular files it is horribly broken for directories, where the VFS locking relies on the fact that there is only just one single dentry for a given inode, and that these are always connected to the root of the filesystem so that it's locking algorithms work (see Documentations/filesystems/Locking) Remove all the existing open by handle code and replace it with a small wrapper around the exportfs code which deals with all these issues. At the same time we also make the checks for a valid handle strict enough to reject all not perfectly well formed handles - given that we never hand out others that's okay and simplifies the code. Signed-off-by: Christoph Hellwig Reviewed-by: Dave Chinner --- fs/xfs/Kconfig | 1 + fs/xfs/linux-2.6/xfs_ioctl.c | 305 ++++++++++++++++++----------------------- fs/xfs/linux-2.6/xfs_ioctl.h | 15 +- fs/xfs/linux-2.6/xfs_ioctl32.c | 175 +++++++---------------- 4 files changed, 196 insertions(+), 300 deletions(-) (limited to 'fs') diff --git a/fs/xfs/Kconfig b/fs/xfs/Kconfig index 3f53dd101f99..29228f5899cd 100644 --- a/fs/xfs/Kconfig +++ b/fs/xfs/Kconfig @@ -1,6 +1,7 @@ config XFS_FS tristate "XFS filesystem support" depends on BLOCK + select EXPORTFS help XFS is a high performance journaling filesystem which originated on the SGI IRIX platform. It is completely multi-threaded, can diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c index e5be1e0be802..4bd112313f33 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.c +++ b/fs/xfs/linux-2.6/xfs_ioctl.c @@ -50,12 +50,14 @@ #include "xfs_vnodeops.h" #include "xfs_quota.h" #include "xfs_inode_item.h" +#include "xfs_export.h" #include #include #include #include #include +#include /* * xfs_find_handle maps from userspace xfs_fsop_handlereq structure to @@ -164,97 +166,69 @@ xfs_find_handle( return 0; } - /* - * Convert userspace handle data into inode. - * - * We use the fact that all the fsop_handlereq ioctl calls have a data - * structure argument whose first component is always a xfs_fsop_handlereq_t, - * so we can pass that sub structure into this handy, shared routine. - * - * If no error, caller must always iput the returned inode. + * No need to do permission checks on the various pathname components + * as the handle operations are privileged. */ STATIC int -xfs_vget_fsop_handlereq( - xfs_mount_t *mp, - struct inode *parinode, /* parent inode pointer */ - xfs_fsop_handlereq_t *hreq, - struct inode **inode) +xfs_handle_acceptable( + void *context, + struct dentry *dentry) +{ + return 1; +} + +/* + * Convert userspace handle data into a dentry. + */ +struct dentry * +xfs_handle_to_dentry( + struct file *parfilp, + void __user *uhandle, + u32 hlen) { - void __user *hanp; - size_t hlen; - xfs_fid_t *xfid; - xfs_handle_t *handlep; xfs_handle_t handle; - xfs_inode_t *ip; - xfs_ino_t ino; - __u32 igen; - int error; + struct xfs_fid64 fid; /* * Only allow handle opens under a directory. */ - if (!S_ISDIR(parinode->i_mode)) - return XFS_ERROR(ENOTDIR); - - hanp = hreq->ihandle; - hlen = hreq->ihandlen; - handlep = &handle; - - if (hlen < sizeof(handlep->ha_fsid) || hlen > sizeof(*handlep)) - return XFS_ERROR(EINVAL); - if (copy_from_user(handlep, hanp, hlen)) - return XFS_ERROR(EFAULT); - if (hlen < sizeof(*handlep)) - memset(((char *)handlep) + hlen, 0, sizeof(*handlep) - hlen); - if (hlen > sizeof(handlep->ha_fsid)) { - if (handlep->ha_fid.fid_len != - (hlen - sizeof(handlep->ha_fsid) - - sizeof(handlep->ha_fid.fid_len)) || - handlep->ha_fid.fid_pad) - return XFS_ERROR(EINVAL); - } - - /* - * Crack the handle, obtain the inode # & generation # - */ - xfid = (struct xfs_fid *)&handlep->ha_fid; - if (xfid->fid_len == sizeof(*xfid) - sizeof(xfid->fid_len)) { - ino = xfid->fid_ino; - igen = xfid->fid_gen; - } else { - return XFS_ERROR(EINVAL); - } - - /* - * Get the XFS inode, building a Linux inode to go with it. - */ - error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_SHARED, &ip, 0); - if (error) - return error; - if (ip == NULL) - return XFS_ERROR(EIO); - if (ip->i_d.di_gen != igen) { - xfs_iput_new(ip, XFS_ILOCK_SHARED); - return XFS_ERROR(ENOENT); - } - - xfs_iunlock(ip, XFS_ILOCK_SHARED); + if (!S_ISDIR(parfilp->f_path.dentry->d_inode->i_mode)) + return ERR_PTR(-ENOTDIR); + + if (hlen != sizeof(xfs_handle_t)) + return ERR_PTR(-EINVAL); + if (copy_from_user(&handle, uhandle, hlen)) + return ERR_PTR(-EFAULT); + if (handle.ha_fid.fid_len != + sizeof(handle.ha_fid) - sizeof(handle.ha_fid.fid_len)) + return ERR_PTR(-EINVAL); + + memset(&fid, 0, sizeof(struct fid)); + fid.ino = handle.ha_fid.fid_ino; + fid.gen = handle.ha_fid.fid_gen; + + return exportfs_decode_fh(parfilp->f_path.mnt, (struct fid *)&fid, 3, + FILEID_INO32_GEN | XFS_FILEID_TYPE_64FLAG, + xfs_handle_acceptable, NULL); +} - *inode = VFS_I(ip); - return 0; +STATIC struct dentry * +xfs_handlereq_to_dentry( + struct file *parfilp, + xfs_fsop_handlereq_t *hreq) +{ + return xfs_handle_to_dentry(parfilp, hreq->ihandle, hreq->ihandlen); } int xfs_open_by_handle( - xfs_mount_t *mp, - xfs_fsop_handlereq_t *hreq, struct file *parfilp, - struct inode *parinode) + xfs_fsop_handlereq_t *hreq) { const struct cred *cred = current_cred(); int error; - int new_fd; + int fd; int permflag; struct file *filp; struct inode *inode; @@ -263,19 +237,21 @@ xfs_open_by_handle( if (!capable(CAP_SYS_ADMIN)) return -XFS_ERROR(EPERM); - error = xfs_vget_fsop_handlereq(mp, parinode, hreq, &inode); - if (error) - return -error; + dentry = xfs_handlereq_to_dentry(parfilp, hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); + inode = dentry->d_inode; /* Restrict xfs_open_by_handle to directories & regular files. */ if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode))) { - iput(inode); - return -XFS_ERROR(EINVAL); + error = -XFS_ERROR(EPERM); + goto out_dput; } #if BITS_PER_LONG != 32 hreq->oflags |= O_LARGEFILE; #endif + /* Put open permission in namei format. */ permflag = hreq->oflags; if ((permflag+1) & O_ACCMODE) @@ -285,50 +261,45 @@ xfs_open_by_handle( if ((!(permflag & O_APPEND) || (permflag & O_TRUNC)) && (permflag & FMODE_WRITE) && IS_APPEND(inode)) { - iput(inode); - return -XFS_ERROR(EPERM); + error = -XFS_ERROR(EPERM); + goto out_dput; } if ((permflag & FMODE_WRITE) && IS_IMMUTABLE(inode)) { - iput(inode); - return -XFS_ERROR(EACCES); + error = -XFS_ERROR(EACCES); + goto out_dput; } /* Can't write directories. */ - if ( S_ISDIR(inode->i_mode) && (permflag & FMODE_WRITE)) { - iput(inode); - return -XFS_ERROR(EISDIR); + if (S_ISDIR(inode->i_mode) && (permflag & FMODE_WRITE)) { + error = -XFS_ERROR(EISDIR); + goto out_dput; } - if ((new_fd = get_unused_fd()) < 0) { - iput(inode); - return new_fd; + fd = get_unused_fd(); + if (fd < 0) { + error = fd; + goto out_dput; } - dentry = d_obtain_alias(inode); - if (IS_ERR(dentry)) { - put_unused_fd(new_fd); - return PTR_ERR(dentry); - } - - /* Ensure umount returns EBUSY on umounts while this file is open. */ - mntget(parfilp->f_path.mnt); - - /* Create file pointer. */ - filp = dentry_open(dentry, parfilp->f_path.mnt, hreq->oflags, cred); + filp = dentry_open(dentry, mntget(parfilp->f_path.mnt), + hreq->oflags, cred); if (IS_ERR(filp)) { - put_unused_fd(new_fd); - return -XFS_ERROR(-PTR_ERR(filp)); + put_unused_fd(fd); + return PTR_ERR(filp); } if (inode->i_mode & S_IFREG) { - /* invisible operation should not change atime */ filp->f_flags |= O_NOATIME; filp->f_mode |= FMODE_NOCMTIME; } - fd_install(new_fd, filp); - return new_fd; + fd_install(fd, filp); + return fd; + + out_dput: + dput(dentry); + return error; } /* @@ -359,11 +330,10 @@ do_readlink( int xfs_readlink_by_handle( - xfs_mount_t *mp, - xfs_fsop_handlereq_t *hreq, - struct inode *parinode) + struct file *parfilp, + xfs_fsop_handlereq_t *hreq) { - struct inode *inode; + struct dentry *dentry; __u32 olen; void *link; int error; @@ -371,26 +341,28 @@ xfs_readlink_by_handle( if (!capable(CAP_SYS_ADMIN)) return -XFS_ERROR(EPERM); - error = xfs_vget_fsop_handlereq(mp, parinode, hreq, &inode); - if (error) - return -error; + dentry = xfs_handlereq_to_dentry(parfilp, hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); /* Restrict this handle operation to symlinks only. */ - if (!S_ISLNK(inode->i_mode)) { + if (!S_ISLNK(dentry->d_inode->i_mode)) { error = -XFS_ERROR(EINVAL); - goto out_iput; + goto out_dput; } if (copy_from_user(&olen, hreq->ohandlen, sizeof(__u32))) { error = -XFS_ERROR(EFAULT); - goto out_iput; + goto out_dput; } link = kmalloc(MAXPATHLEN+1, GFP_KERNEL); - if (!link) - goto out_iput; + if (!link) { + error = -XFS_ERROR(ENOMEM); + goto out_dput; + } - error = -xfs_readlink(XFS_I(inode), link); + error = -xfs_readlink(XFS_I(dentry->d_inode), link); if (error) goto out_kfree; error = do_readlink(hreq->ohandle, olen, link); @@ -399,32 +371,31 @@ xfs_readlink_by_handle( out_kfree: kfree(link); - out_iput: - iput(inode); + out_dput: + dput(dentry); return error; } STATIC int xfs_fssetdm_by_handle( - xfs_mount_t *mp, - void __user *arg, - struct inode *parinode) + struct file *parfilp, + void __user *arg) { int error; struct fsdmidata fsd; xfs_fsop_setdm_handlereq_t dmhreq; - struct inode *inode; + struct dentry *dentry; if (!capable(CAP_MKNOD)) return -XFS_ERROR(EPERM); if (copy_from_user(&dmhreq, arg, sizeof(xfs_fsop_setdm_handlereq_t))) return -XFS_ERROR(EFAULT); - error = xfs_vget_fsop_handlereq(mp, parinode, &dmhreq.hreq, &inode); - if (error) - return -error; + dentry = xfs_handlereq_to_dentry(parfilp, &dmhreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); - if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) { + if (IS_IMMUTABLE(dentry->d_inode) || IS_APPEND(dentry->d_inode)) { error = -XFS_ERROR(EPERM); goto out; } @@ -434,24 +405,23 @@ xfs_fssetdm_by_handle( goto out; } - error = -xfs_set_dmattrs(XFS_I(inode), fsd.fsd_dmevmask, + error = -xfs_set_dmattrs(XFS_I(dentry->d_inode), fsd.fsd_dmevmask, fsd.fsd_dmstate); out: - iput(inode); + dput(dentry); return error; } STATIC int xfs_attrlist_by_handle( - xfs_mount_t *mp, - void __user *arg, - struct inode *parinode) + struct file *parfilp, + void __user *arg) { - int error; + int error = -ENOMEM; attrlist_cursor_kern_t *cursor; xfs_fsop_attrlist_handlereq_t al_hreq; - struct inode *inode; + struct dentry *dentry; char *kbuf; if (!capable(CAP_SYS_ADMIN)) @@ -467,16 +437,16 @@ xfs_attrlist_by_handle( if (al_hreq.flags & ~(ATTR_ROOT | ATTR_SECURE)) return -XFS_ERROR(EINVAL); - error = xfs_vget_fsop_handlereq(mp, parinode, &al_hreq.hreq, &inode); - if (error) - goto out; + dentry = xfs_handlereq_to_dentry(parfilp, &al_hreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); kbuf = kmalloc(al_hreq.buflen, GFP_KERNEL); if (!kbuf) - goto out_vn_rele; + goto out_dput; cursor = (attrlist_cursor_kern_t *)&al_hreq.pos; - error = xfs_attr_list(XFS_I(inode), kbuf, al_hreq.buflen, + error = -xfs_attr_list(XFS_I(dentry->d_inode), kbuf, al_hreq.buflen, al_hreq.flags, cursor); if (error) goto out_kfree; @@ -486,10 +456,9 @@ xfs_attrlist_by_handle( out_kfree: kfree(kbuf); - out_vn_rele: - iput(inode); - out: - return -error; + out_dput: + dput(dentry); + return error; } int @@ -564,15 +533,13 @@ xfs_attrmulti_attr_remove( STATIC int xfs_attrmulti_by_handle( - xfs_mount_t *mp, - void __user *arg, struct file *parfilp, - struct inode *parinode) + void __user *arg) { int error; xfs_attr_multiop_t *ops; xfs_fsop_attrmulti_handlereq_t am_hreq; - struct inode *inode; + struct dentry *dentry; unsigned int i, size; char *attr_name; @@ -581,19 +548,19 @@ xfs_attrmulti_by_handle( if (copy_from_user(&am_hreq, arg, sizeof(xfs_fsop_attrmulti_handlereq_t))) return -XFS_ERROR(EFAULT); - error = xfs_vget_fsop_handlereq(mp, parinode, &am_hreq.hreq, &inode); - if (error) - goto out; + dentry = xfs_handlereq_to_dentry(parfilp, &am_hreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); error = E2BIG; size = am_hreq.opcount * sizeof(xfs_attr_multiop_t); if (!size || size > 16 * PAGE_SIZE) - goto out_vn_rele; + goto out_dput; error = ENOMEM; ops = kmalloc(size, GFP_KERNEL); if (!ops) - goto out_vn_rele; + goto out_dput; error = EFAULT; if (copy_from_user(ops, am_hreq.ops, size)) @@ -615,25 +582,28 @@ xfs_attrmulti_by_handle( switch (ops[i].am_opcode) { case ATTR_OP_GET: - ops[i].am_error = xfs_attrmulti_attr_get(inode, - attr_name, ops[i].am_attrvalue, - &ops[i].am_length, ops[i].am_flags); + ops[i].am_error = xfs_attrmulti_attr_get( + dentry->d_inode, attr_name, + ops[i].am_attrvalue, &ops[i].am_length, + ops[i].am_flags); break; case ATTR_OP_SET: ops[i].am_error = mnt_want_write(parfilp->f_path.mnt); if (ops[i].am_error) break; - ops[i].am_error = xfs_attrmulti_attr_set(inode, - attr_name, ops[i].am_attrvalue, - ops[i].am_length, ops[i].am_flags); + ops[i].am_error = xfs_attrmulti_attr_set( + dentry->d_inode, attr_name, + ops[i].am_attrvalue, ops[i].am_length, + ops[i].am_flags); mnt_drop_write(parfilp->f_path.mnt); break; case ATTR_OP_REMOVE: ops[i].am_error = mnt_want_write(parfilp->f_path.mnt); if (ops[i].am_error) break; - ops[i].am_error = xfs_attrmulti_attr_remove(inode, - attr_name, ops[i].am_flags); + ops[i].am_error = xfs_attrmulti_attr_remove( + dentry->d_inode, attr_name, + ops[i].am_flags); mnt_drop_write(parfilp->f_path.mnt); break; default: @@ -647,9 +617,8 @@ xfs_attrmulti_by_handle( kfree(attr_name); out_kfree_ops: kfree(ops); - out_vn_rele: - iput(inode); - out: + out_dput: + dput(dentry); return -error; } @@ -1440,23 +1409,23 @@ xfs_file_ioctl( if (copy_from_user(&hreq, arg, sizeof(xfs_fsop_handlereq_t))) return -XFS_ERROR(EFAULT); - return xfs_open_by_handle(mp, &hreq, filp, inode); + return xfs_open_by_handle(filp, &hreq); } case XFS_IOC_FSSETDM_BY_HANDLE: - return xfs_fssetdm_by_handle(mp, arg, inode); + return xfs_fssetdm_by_handle(filp, arg); case XFS_IOC_READLINK_BY_HANDLE: { xfs_fsop_handlereq_t hreq; if (copy_from_user(&hreq, arg, sizeof(xfs_fsop_handlereq_t))) return -XFS_ERROR(EFAULT); - return xfs_readlink_by_handle(mp, &hreq, inode); + return xfs_readlink_by_handle(filp, &hreq); } case XFS_IOC_ATTRLIST_BY_HANDLE: - return xfs_attrlist_by_handle(mp, arg, inode); + return xfs_attrlist_by_handle(filp, arg); case XFS_IOC_ATTRMULTI_BY_HANDLE: - return xfs_attrmulti_by_handle(mp, arg, filp, inode); + return xfs_attrmulti_by_handle(filp, arg); case XFS_IOC_SWAPEXT: { struct xfs_swapext sxp; diff --git a/fs/xfs/linux-2.6/xfs_ioctl.h b/fs/xfs/linux-2.6/xfs_ioctl.h index 8c16bf2d7e03..7bd7c6afc1eb 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.h +++ b/fs/xfs/linux-2.6/xfs_ioctl.h @@ -34,16 +34,13 @@ xfs_find_handle( extern int xfs_open_by_handle( - xfs_mount_t *mp, - xfs_fsop_handlereq_t *hreq, struct file *parfilp, - struct inode *parinode); + xfs_fsop_handlereq_t *hreq); extern int xfs_readlink_by_handle( - xfs_mount_t *mp, - xfs_fsop_handlereq_t *hreq, - struct inode *parinode); + struct file *parfilp, + xfs_fsop_handlereq_t *hreq); extern int xfs_attrmulti_attr_get( @@ -67,6 +64,12 @@ xfs_attrmulti_attr_remove( char *name, __uint32_t flags); +extern struct dentry * +xfs_handle_to_dentry( + struct file *parfilp, + void __user *uhandle, + u32 hlen); + extern long xfs_file_ioctl( struct file *filp, diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/linux-2.6/xfs_ioctl32.c index 50903ad3182e..fd4362063f25 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl32.c +++ b/fs/xfs/linux-2.6/xfs_ioctl32.c @@ -340,96 +340,24 @@ xfs_compat_handlereq_copyin( return 0; } -/* - * Convert userspace handle data into inode. - * - * We use the fact that all the fsop_handlereq ioctl calls have a data - * structure argument whose first component is always a xfs_fsop_handlereq_t, - * so we can pass that sub structure into this handy, shared routine. - * - * If no error, caller must always iput the returned inode. - */ -STATIC int -xfs_vget_fsop_handlereq_compat( - xfs_mount_t *mp, - struct inode *parinode, /* parent inode pointer */ - compat_xfs_fsop_handlereq_t *hreq, - struct inode **inode) +STATIC struct dentry * +xfs_compat_handlereq_to_dentry( + struct file *parfilp, + compat_xfs_fsop_handlereq_t *hreq) { - void __user *hanp; - size_t hlen; - xfs_fid_t *xfid; - xfs_handle_t *handlep; - xfs_handle_t handle; - xfs_inode_t *ip; - xfs_ino_t ino; - __u32 igen; - int error; - - /* - * Only allow handle opens under a directory. - */ - if (!S_ISDIR(parinode->i_mode)) - return XFS_ERROR(ENOTDIR); - - hanp = compat_ptr(hreq->ihandle); - hlen = hreq->ihandlen; - handlep = &handle; - - if (hlen < sizeof(handlep->ha_fsid) || hlen > sizeof(*handlep)) - return XFS_ERROR(EINVAL); - if (copy_from_user(handlep, hanp, hlen)) - return XFS_ERROR(EFAULT); - if (hlen < sizeof(*handlep)) - memset(((char *)handlep) + hlen, 0, sizeof(*handlep) - hlen); - if (hlen > sizeof(handlep->ha_fsid)) { - if (handlep->ha_fid.fid_len != - (hlen - sizeof(handlep->ha_fsid) - - sizeof(handlep->ha_fid.fid_len)) || - handlep->ha_fid.fid_pad) - return XFS_ERROR(EINVAL); - } - - /* - * Crack the handle, obtain the inode # & generation # - */ - xfid = (struct xfs_fid *)&handlep->ha_fid; - if (xfid->fid_len == sizeof(*xfid) - sizeof(xfid->fid_len)) { - ino = xfid->fid_ino; - igen = xfid->fid_gen; - } else { - return XFS_ERROR(EINVAL); - } - - /* - * Get the XFS inode, building a Linux inode to go with it. - */ - error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_SHARED, &ip, 0); - if (error) - return error; - if (ip == NULL) - return XFS_ERROR(EIO); - if (ip->i_d.di_gen != igen) { - xfs_iput_new(ip, XFS_ILOCK_SHARED); - return XFS_ERROR(ENOENT); - } - - xfs_iunlock(ip, XFS_ILOCK_SHARED); - - *inode = VFS_I(ip); - return 0; + return xfs_handle_to_dentry(parfilp, + compat_ptr(hreq->ihandle), hreq->ihandlen); } STATIC int xfs_compat_attrlist_by_handle( - xfs_mount_t *mp, - void __user *arg, - struct inode *parinode) + struct file *parfilp, + void __user *arg) { int error; attrlist_cursor_kern_t *cursor; compat_xfs_fsop_attrlist_handlereq_t al_hreq; - struct inode *inode; + struct dentry *dentry; char *kbuf; if (!capable(CAP_SYS_ADMIN)) @@ -446,17 +374,17 @@ xfs_compat_attrlist_by_handle( if (al_hreq.flags & ~(ATTR_ROOT | ATTR_SECURE)) return -XFS_ERROR(EINVAL); - error = xfs_vget_fsop_handlereq_compat(mp, parinode, &al_hreq.hreq, - &inode); - if (error) - goto out; + dentry = xfs_compat_handlereq_to_dentry(parfilp, &al_hreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); + error = -ENOMEM; kbuf = kmalloc(al_hreq.buflen, GFP_KERNEL); if (!kbuf) - goto out_vn_rele; + goto out_dput; cursor = (attrlist_cursor_kern_t *)&al_hreq.pos; - error = xfs_attr_list(XFS_I(inode), kbuf, al_hreq.buflen, + error = -xfs_attr_list(XFS_I(dentry->d_inode), kbuf, al_hreq.buflen, al_hreq.flags, cursor); if (error) goto out_kfree; @@ -466,22 +394,20 @@ xfs_compat_attrlist_by_handle( out_kfree: kfree(kbuf); - out_vn_rele: - iput(inode); - out: - return -error; + out_dput: + dput(dentry); + return error; } STATIC int xfs_compat_attrmulti_by_handle( - xfs_mount_t *mp, - void __user *arg, - struct inode *parinode) + struct file *parfilp, + void __user *arg) { int error; compat_xfs_attr_multiop_t *ops; compat_xfs_fsop_attrmulti_handlereq_t am_hreq; - struct inode *inode; + struct dentry *dentry; unsigned int i, size; char *attr_name; @@ -491,20 +417,19 @@ xfs_compat_attrmulti_by_handle( sizeof(compat_xfs_fsop_attrmulti_handlereq_t))) return -XFS_ERROR(EFAULT); - error = xfs_vget_fsop_handlereq_compat(mp, parinode, &am_hreq.hreq, - &inode); - if (error) - goto out; + dentry = xfs_compat_handlereq_to_dentry(parfilp, &am_hreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); error = E2BIG; size = am_hreq.opcount * sizeof(compat_xfs_attr_multiop_t); if (!size || size > 16 * PAGE_SIZE) - goto out_vn_rele; + goto out_dput; error = ENOMEM; ops = kmalloc(size, GFP_KERNEL); if (!ops) - goto out_vn_rele; + goto out_dput; error = EFAULT; if (copy_from_user(ops, compat_ptr(am_hreq.ops), size)) @@ -527,20 +452,21 @@ xfs_compat_attrmulti_by_handle( switch (ops[i].am_opcode) { case ATTR_OP_GET: - ops[i].am_error = xfs_attrmulti_attr_get(inode, - attr_name, + ops[i].am_error = xfs_attrmulti_attr_get( + dentry->d_inode, attr_name, compat_ptr(ops[i].am_attrvalue), &ops[i].am_length, ops[i].am_flags); break; case ATTR_OP_SET: - ops[i].am_error = xfs_attrmulti_attr_set(inode, - attr_name, + ops[i].am_error = xfs_attrmulti_attr_set( + dentry->d_inode, attr_name, compat_ptr(ops[i].am_attrvalue), ops[i].am_length, ops[i].am_flags); break; case ATTR_OP_REMOVE: - ops[i].am_error = xfs_attrmulti_attr_remove(inode, - attr_name, ops[i].am_flags); + ops[i].am_error = xfs_attrmulti_attr_remove( + dentry->d_inode, attr_name, + ops[i].am_flags); break; default: ops[i].am_error = EINVAL; @@ -553,22 +479,20 @@ xfs_compat_attrmulti_by_handle( kfree(attr_name); out_kfree_ops: kfree(ops); - out_vn_rele: - iput(inode); - out: + out_dput: + dput(dentry); return -error; } STATIC int xfs_compat_fssetdm_by_handle( - xfs_mount_t *mp, - void __user *arg, - struct inode *parinode) + struct file *parfilp, + void __user *arg) { int error; struct fsdmidata fsd; compat_xfs_fsop_setdm_handlereq_t dmhreq; - struct inode *inode; + struct dentry *dentry; if (!capable(CAP_MKNOD)) return -XFS_ERROR(EPERM); @@ -576,12 +500,11 @@ xfs_compat_fssetdm_by_handle( sizeof(compat_xfs_fsop_setdm_handlereq_t))) return -XFS_ERROR(EFAULT); - error = xfs_vget_fsop_handlereq_compat(mp, parinode, &dmhreq.hreq, - &inode); - if (error) - return -error; + dentry = xfs_compat_handlereq_to_dentry(parfilp, &dmhreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); - if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) { + if (IS_IMMUTABLE(dentry->d_inode) || IS_APPEND(dentry->d_inode)) { error = -XFS_ERROR(EPERM); goto out; } @@ -591,11 +514,11 @@ xfs_compat_fssetdm_by_handle( goto out; } - error = -xfs_set_dmattrs(XFS_I(inode), fsd.fsd_dmevmask, + error = -xfs_set_dmattrs(XFS_I(dentry->d_inode), fsd.fsd_dmevmask, fsd.fsd_dmstate); out: - iput(inode); + dput(dentry); return error; } @@ -722,21 +645,21 @@ xfs_file_compat_ioctl( if (xfs_compat_handlereq_copyin(&hreq, arg)) return -XFS_ERROR(EFAULT); - return xfs_open_by_handle(mp, &hreq, filp, inode); + return xfs_open_by_handle(filp, &hreq); } case XFS_IOC_READLINK_BY_HANDLE_32: { struct xfs_fsop_handlereq hreq; if (xfs_compat_handlereq_copyin(&hreq, arg)) return -XFS_ERROR(EFAULT); - return xfs_readlink_by_handle(mp, &hreq, inode); + return xfs_readlink_by_handle(filp, &hreq); } case XFS_IOC_ATTRLIST_BY_HANDLE_32: - return xfs_compat_attrlist_by_handle(mp, arg, inode); + return xfs_compat_attrlist_by_handle(filp, arg); case XFS_IOC_ATTRMULTI_BY_HANDLE_32: - return xfs_compat_attrmulti_by_handle(mp, arg, inode); + return xfs_compat_attrmulti_by_handle(filp, arg); case XFS_IOC_FSSETDM_BY_HANDLE_32: - return xfs_compat_fssetdm_by_handle(mp, arg, inode); + return xfs_compat_fssetdm_by_handle(filp, arg); default: return -XFS_ERROR(ENOIOCTLCMD); } -- cgit v1.2.2 From 62e194ecdaf8a1935991c1f8704886328d96a391 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 19 Jan 2009 02:03:03 +0100 Subject: xfs: use mnt_want_write in compat_attrmulti ioctl The compat version of the attrmulti ioctl needs to ask for and then later release write access to the mount just like the native version, otherwise we could potentially write to read-only mounts. Signed-off-by: Christoph Hellwig Reviewed-by: Dave Chinner --- fs/xfs/linux-2.6/xfs_ioctl32.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'fs') diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/linux-2.6/xfs_ioctl32.c index fd4362063f25..c70c4e3db790 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl32.c +++ b/fs/xfs/linux-2.6/xfs_ioctl32.c @@ -17,6 +17,7 @@ */ #include #include +#include #include #include "xfs.h" #include "xfs_fs.h" @@ -458,15 +459,23 @@ xfs_compat_attrmulti_by_handle( &ops[i].am_length, ops[i].am_flags); break; case ATTR_OP_SET: + ops[i].am_error = mnt_want_write(parfilp->f_path.mnt); + if (ops[i].am_error) + break; ops[i].am_error = xfs_attrmulti_attr_set( dentry->d_inode, attr_name, compat_ptr(ops[i].am_attrvalue), ops[i].am_length, ops[i].am_flags); + mnt_drop_write(parfilp->f_path.mnt); break; case ATTR_OP_REMOVE: + ops[i].am_error = mnt_want_write(parfilp->f_path.mnt); + if (ops[i].am_error) + break; ops[i].am_error = xfs_attrmulti_attr_remove( dentry->d_inode, attr_name, ops[i].am_flags); + mnt_drop_write(parfilp->f_path.mnt); break; default: ops[i].am_error = EINVAL; -- cgit v1.2.2 From 080dda7f5e8e8df95bcd17a5345c276e365a2054 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 19 Jan 2009 02:03:11 +0100 Subject: xfs: add a separate lock class for the per-mount list of dquots We can have both a a quota hash chain and the per-mount list locked at the same time. But given that both use the same struct dqhash as list head we have to tell lockdep that they are different lock classes. Signed-off-by: Christoph Hellwig Reviewed-by: Dave Chinner --- fs/xfs/quota/xfs_qm.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'fs') diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c index 6b13960cf318..7a2beb64314f 100644 --- a/fs/xfs/quota/xfs_qm.c +++ b/fs/xfs/quota/xfs_qm.c @@ -1070,6 +1070,13 @@ xfs_qm_sync( return 0; } +/* + * The hash chains and the mplist use the same xfs_dqhash structure as + * their list head, but we can take the mplist qh_lock and one of the + * hash qh_locks at the same time without any problem as they aren't + * related. + */ +static struct lock_class_key xfs_quota_mplist_class; /* * This initializes all the quota information that's kept in the @@ -1105,6 +1112,8 @@ xfs_qm_init_quotainfo( } xfs_qm_list_init(&qinf->qi_dqlist, "mpdqlist", 0); + lockdep_set_class(&qinf->qi_dqlist.qh_lock, &xfs_quota_mplist_class); + qinf->qi_dqreclaims = 0; /* mutex used to serialize quotaoffs */ -- cgit v1.2.2 From 4f2d4ac6e5eb7d72e8df7f3fbf67a78dab8b91cf Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 19 Jan 2009 02:03:19 +0100 Subject: xfs: lockdep annotations for xfs_dqlock2 xfs_dqlock2 locks two xfs_dquots, which is fine as it always locks the dquot with the lower id first. Use mutex_lock_nested to tell lockdep about this fact. Signed-off-by: Christoph Hellwig Reviewed-by: Dave Chinner --- fs/xfs/quota/xfs_dquot.c | 24 ++++++++++++++---------- fs/xfs/quota/xfs_dquot.h | 10 ++++++++++ 2 files changed, 24 insertions(+), 10 deletions(-) (limited to 'fs') diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c index 591ca6602bfb..36d1bb6140d1 100644 --- a/fs/xfs/quota/xfs_dquot.c +++ b/fs/xfs/quota/xfs_dquot.c @@ -1383,6 +1383,12 @@ xfs_dqunlock_nonotify( mutex_unlock(&(dqp->q_qlock)); } +/* + * Lock two xfs_dquot structures. + * + * To avoid deadlocks we always lock the quota structure with + * the lowerd id first. + */ void xfs_dqlock2( xfs_dquot_t *d1, @@ -1392,18 +1398,16 @@ xfs_dqlock2( ASSERT(d1 != d2); if (be32_to_cpu(d1->q_core.d_id) > be32_to_cpu(d2->q_core.d_id)) { - xfs_dqlock(d2); - xfs_dqlock(d1); + mutex_lock(&d2->q_qlock); + mutex_lock_nested(&d1->q_qlock, XFS_QLOCK_NESTED); } else { - xfs_dqlock(d1); - xfs_dqlock(d2); - } - } else { - if (d1) { - xfs_dqlock(d1); - } else if (d2) { - xfs_dqlock(d2); + mutex_lock(&d1->q_qlock); + mutex_lock_nested(&d2->q_qlock, XFS_QLOCK_NESTED); } + } else if (d1) { + mutex_lock(&d1->q_qlock); + } else if (d2) { + mutex_lock(&d2->q_qlock); } } diff --git a/fs/xfs/quota/xfs_dquot.h b/fs/xfs/quota/xfs_dquot.h index 7e455337e2ba..d443e93b4331 100644 --- a/fs/xfs/quota/xfs_dquot.h +++ b/fs/xfs/quota/xfs_dquot.h @@ -97,6 +97,16 @@ typedef struct xfs_dquot { #define dq_hashlist q_lists.dqm_hashlist #define dq_flags q_lists.dqm_flags +/* + * Lock hierachy for q_qlock: + * XFS_QLOCK_NORMAL is the implicit default, + * XFS_QLOCK_NESTED is the dquot with the higher id in xfs_dqlock2 + */ +enum { + XFS_QLOCK_NORMAL = 0, + XFS_QLOCK_NESTED, +}; + #define XFS_DQHOLD(dqp) ((dqp)->q_nrefs++) #ifdef DEBUG -- cgit v1.2.2 From 5aa2dc0a0697c762874241fa9ddbecd2d878b934 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 19 Jan 2009 02:03:25 +0100 Subject: xfs: add a lock class for group/project dquots We can have both a user and a group/project dquot locked at the same time, as long as the user dquot is locked first. Tell lockdep about that fact by making the group/project dquots a different lock class. Signed-off-by: Christoph Hellwig Reviewed-by: Dave Chinner --- fs/xfs/quota/xfs_dquot.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'fs') diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c index 36d1bb6140d1..f0bc7846580b 100644 --- a/fs/xfs/quota/xfs_dquot.c +++ b/fs/xfs/quota/xfs_dquot.c @@ -73,6 +73,8 @@ int xfs_dqreq_num; int xfs_dqerror_mod = 33; #endif +static struct lock_class_key xfs_dquot_other_class; + /* * Allocate and initialize a dquot. We don't always allocate fresh memory; * we try to reclaim a free dquot if the number of incore dquots are above @@ -139,7 +141,15 @@ xfs_qm_dqinit( ASSERT(dqp->q_trace); xfs_dqtrace_entry(dqp, "DQRECLAIMED_INIT"); #endif - } + } + + /* + * In either case we need to make sure group quotas have a different + * lock class than user quotas, to make sure lockdep knows we can + * locks of one of each at the same time. + */ + if (!(type & XFS_DQ_USER)) + lockdep_set_class(&dqp->q_qlock, &xfs_dquot_other_class); /* * log item gets initialized later -- cgit v1.2.2 From 49739140e57a65114d9e1976c4c158d2145595fb Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 19 Jan 2009 02:04:07 +0100 Subject: xfs: fix bad_features2 fixups for the root filesystem Currently the bad_features2 fixup and the alignment updates in the superblock are skipped if we mount a filesystem read-only. But for the root filesystem the typical case is to mount read-only first and only later remount writeable so we'll never perform this update at all. It's not a big problem but means the logs of people needing the fixup get spammed at every boot because they never happen on disk. Reported-by: Arkadiusz Miskiewicz Signed-off-by: Christoph Hellwig Reviewed-by: Dave Chinner --- fs/xfs/linux-2.6/xfs_super.c | 17 ++++++++++++++++- fs/xfs/xfs_mount.c | 26 +++++++++++++------------- fs/xfs/xfs_mount.h | 3 +++ 3 files changed, 32 insertions(+), 14 deletions(-) (limited to 'fs') diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 95a971080368..c71e226da7f5 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1197,6 +1197,7 @@ xfs_fs_remount( struct xfs_mount *mp = XFS_M(sb); substring_t args[MAX_OPT_ARGS]; char *p; + int error; while ((p = strsep(&options, ",")) != NULL) { int token; @@ -1247,11 +1248,25 @@ xfs_fs_remount( } } - /* rw/ro -> rw */ + /* ro -> rw */ if ((mp->m_flags & XFS_MOUNT_RDONLY) && !(*flags & MS_RDONLY)) { mp->m_flags &= ~XFS_MOUNT_RDONLY; if (mp->m_flags & XFS_MOUNT_BARRIER) xfs_mountfs_check_barriers(mp); + + /* + * If this is the first remount to writeable state we + * might have some superblock changes to update. + */ + if (mp->m_update_flags) { + error = xfs_mount_log_sb(mp, mp->m_update_flags); + if (error) { + cmn_err(CE_WARN, + "XFS: failed to write sb changes"); + return error; + } + mp->m_update_flags = 0; + } } /* rw -> ro */ diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index 3c97c6463a4e..35300250e86d 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -45,7 +45,6 @@ #include "xfs_fsops.h" #include "xfs_utils.h" -STATIC int xfs_mount_log_sb(xfs_mount_t *, __int64_t); STATIC int xfs_uuid_mount(xfs_mount_t *); STATIC void xfs_unmountfs_wait(xfs_mount_t *); @@ -682,7 +681,7 @@ xfs_initialize_perag_data(xfs_mount_t *mp, xfs_agnumber_t agcount) * Update alignment values based on mount options and sb values */ STATIC int -xfs_update_alignment(xfs_mount_t *mp, __uint64_t *update_flags) +xfs_update_alignment(xfs_mount_t *mp) { xfs_sb_t *sbp = &(mp->m_sb); @@ -736,11 +735,11 @@ xfs_update_alignment(xfs_mount_t *mp, __uint64_t *update_flags) if (xfs_sb_version_hasdalign(sbp)) { if (sbp->sb_unit != mp->m_dalign) { sbp->sb_unit = mp->m_dalign; - *update_flags |= XFS_SB_UNIT; + mp->m_update_flags |= XFS_SB_UNIT; } if (sbp->sb_width != mp->m_swidth) { sbp->sb_width = mp->m_swidth; - *update_flags |= XFS_SB_WIDTH; + mp->m_update_flags |= XFS_SB_WIDTH; } } } else if ((mp->m_flags & XFS_MOUNT_NOALIGN) != XFS_MOUNT_NOALIGN && @@ -905,7 +904,6 @@ xfs_mountfs( xfs_sb_t *sbp = &(mp->m_sb); xfs_inode_t *rip; __uint64_t resblks; - __int64_t update_flags = 0LL; uint quotamount, quotaflags; int uuid_mounted = 0; int error = 0; @@ -933,7 +931,7 @@ xfs_mountfs( "XFS: correcting sb_features alignment problem"); sbp->sb_features2 |= sbp->sb_bad_features2; sbp->sb_bad_features2 = sbp->sb_features2; - update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2; + mp->m_update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2; /* * Re-check for ATTR2 in case it was found in bad_features2 @@ -947,11 +945,11 @@ xfs_mountfs( if (xfs_sb_version_hasattr2(&mp->m_sb) && (mp->m_flags & XFS_MOUNT_NOATTR2)) { xfs_sb_version_removeattr2(&mp->m_sb); - update_flags |= XFS_SB_FEATURES2; + mp->m_update_flags |= XFS_SB_FEATURES2; /* update sb_versionnum for the clearing of the morebits */ if (!sbp->sb_features2) - update_flags |= XFS_SB_VERSIONNUM; + mp->m_update_flags |= XFS_SB_VERSIONNUM; } /* @@ -960,7 +958,7 @@ xfs_mountfs( * allocator alignment is within an ag, therefore ag has * to be aligned at stripe boundary. */ - error = xfs_update_alignment(mp, &update_flags); + error = xfs_update_alignment(mp); if (error) goto error1; @@ -1137,10 +1135,12 @@ xfs_mountfs( } /* - * If fs is not mounted readonly, then update the superblock changes. + * If this is a read-only mount defer the superblock updates until + * the next remount into writeable mode. Otherwise we would never + * perform the update e.g. for the root filesystem. */ - if (update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY)) { - error = xfs_mount_log_sb(mp, update_flags); + if (mp->m_update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY)) { + error = xfs_mount_log_sb(mp, mp->m_update_flags); if (error) { cmn_err(CE_WARN, "XFS: failed to write sb changes"); goto error4; @@ -1820,7 +1820,7 @@ xfs_uuid_mount( * be altered by the mount options, as well as any potential sb_features2 * fixup. Only the first superblock is updated. */ -STATIC int +int xfs_mount_log_sb( xfs_mount_t *mp, __int64_t fields) diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h index c1e028467327..e37eff6761eb 100644 --- a/fs/xfs/xfs_mount.h +++ b/fs/xfs/xfs_mount.h @@ -327,6 +327,8 @@ typedef struct xfs_mount { spinlock_t m_sync_lock; /* work item list lock */ int m_sync_seq; /* sync thread generation no. */ wait_queue_head_t m_wait_single_sync_task; + __int64_t m_update_flags; /* sb flags we need to update + on the next remount,rw */ } xfs_mount_t; /* @@ -514,6 +516,7 @@ extern int xfs_mod_incore_sb_unlocked(xfs_mount_t *, xfs_sb_field_t, int64_t, int); extern int xfs_mod_incore_sb_batch(xfs_mount_t *, xfs_mod_sb_t *, uint, int); +extern int xfs_mount_log_sb(xfs_mount_t *, __int64_t); extern struct xfs_buf *xfs_getsb(xfs_mount_t *, int); extern int xfs_readsb(xfs_mount_t *, int); extern void xfs_freesb(xfs_mount_t *); -- cgit v1.2.2 From b828d8c33867dd6479644c06500975570bfd525c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 19 Jan 2009 02:04:16 +0100 Subject: xfs: sanity check attr fork size Recently we have quite a few kerneloops reports about dereferencing a NULL if_data in the attribute fork. From looking over the code this can only happen if we pass a 0 size argument to xfs_iformat_local. This implies some sort of corruption and in fact the only mailinglist report about this from earlier this year was after a powerfail presumably on a system with write cache and without barriers. Add a quick sanity check for the attr fork size in xfs_iformat to catch these early and without an oops. Signed-off-by: Christoph Hellwig Reviewed-by: Dave Chinner --- fs/xfs/xfs_inode.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'fs') diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 5a5e035e5d38..323ecd76a12c 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -424,6 +424,19 @@ xfs_iformat( case XFS_DINODE_FMT_LOCAL: atp = (xfs_attr_shortform_t *)XFS_DFORK_APTR(dip); size = be16_to_cpu(atp->hdr.totsize); + + if (unlikely(size < sizeof(struct xfs_attr_sf_hdr))) { + xfs_fs_repair_cmn_err(CE_WARN, ip->i_mount, + "corrupt inode %Lu " + "(bad attr fork size %Ld).", + (unsigned long long) ip->i_ino, + (long long) size); + XFS_CORRUPTION_ERROR("xfs_iformat(8)", + XFS_ERRLEVEL_LOW, + ip->i_mount, dip); + return XFS_ERROR(EFSCORRUPTED); + } + error = xfs_iformat_local(ip, dip, XFS_ATTR_FORK, size); break; case XFS_DINODE_FMT_EXTENTS: -- cgit v1.2.2 From b6e3222732a3551e786aa47b90a8eab2a517711c Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Wed, 14 Jan 2009 23:22:07 -0600 Subject: [XFS] Remove the rest of the macro-to-function indirections. Remove the last of the macros-defined-to-static-functions. Signed-off-by: Eric Sandeen Reviewed-by: Christoph Hellwig Signed-off-by: Lachlan McIlroy --- fs/xfs/quota/xfs_dquot.c | 2 +- fs/xfs/xfs_ag.h | 6 +- fs/xfs/xfs_alloc_btree.c | 2 +- fs/xfs/xfs_attr.c | 26 ++++---- fs/xfs/xfs_bmap.c | 166 +++++++++++++++++++++++----------------------- fs/xfs/xfs_bmap.h | 2 - fs/xfs/xfs_bmap_btree.c | 10 +-- fs/xfs/xfs_bmap_btree.h | 4 -- fs/xfs/xfs_btree.c | 6 +- fs/xfs/xfs_da_btree.c | 8 +-- fs/xfs/xfs_ialloc.c | 6 +- fs/xfs/xfs_ialloc.h | 2 - fs/xfs/xfs_ialloc_btree.h | 1 - fs/xfs/xfs_inode.c | 6 +- fs/xfs/xfs_inode_item.h | 4 -- fs/xfs/xfs_iomap.c | 10 +-- fs/xfs/xfs_itable.c | 6 +- fs/xfs/xfs_mount.h | 6 +- fs/xfs/xfs_rename.c | 2 +- fs/xfs/xfs_rtalloc.c | 2 +- fs/xfs/xfs_rw.h | 1 - fs/xfs/xfs_sb.h | 2 +- fs/xfs/xfs_vnodeops.c | 20 +++--- 23 files changed, 142 insertions(+), 158 deletions(-) (limited to 'fs') diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c index f0bc7846580b..6543c0b29753 100644 --- a/fs/xfs/quota/xfs_dquot.c +++ b/fs/xfs/quota/xfs_dquot.c @@ -431,7 +431,7 @@ xfs_qm_dqalloc( /* * Initialize the bmap freelist prior to calling bmapi code. */ - XFS_BMAP_INIT(&flist, &firstblock); + xfs_bmap_init(&flist, &firstblock); xfs_ilock(quotip, XFS_ILOCK_EXCL); /* * Return if this type of quotas is turned off while we didn't diff --git a/fs/xfs/xfs_ag.h b/fs/xfs/xfs_ag.h index d3b3cf742999..143d63ecb20a 100644 --- a/fs/xfs/xfs_ag.h +++ b/fs/xfs/xfs_ag.h @@ -244,8 +244,8 @@ typedef struct xfs_perag #define XFS_AG_CHECK_DADDR(mp,d,len) \ ((len) == 1 ? \ ASSERT((d) == XFS_SB_DADDR || \ - XFS_DADDR_TO_AGBNO(mp, d) != XFS_SB_DADDR) : \ - ASSERT(XFS_DADDR_TO_AGNO(mp, d) == \ - XFS_DADDR_TO_AGNO(mp, (d) + (len) - 1))) + xfs_daddr_to_agbno(mp, d) != XFS_SB_DADDR) : \ + ASSERT(xfs_daddr_to_agno(mp, d) == \ + xfs_daddr_to_agno(mp, (d) + (len) - 1))) #endif /* __XFS_AG_H__ */ diff --git a/fs/xfs/xfs_alloc_btree.c b/fs/xfs/xfs_alloc_btree.c index 733cb75a8c5d..c10c3a292d30 100644 --- a/fs/xfs/xfs_alloc_btree.c +++ b/fs/xfs/xfs_alloc_btree.c @@ -115,7 +115,7 @@ xfs_allocbt_free_block( xfs_agblock_t bno; int error; - bno = XFS_DADDR_TO_AGBNO(cur->bc_mp, XFS_BUF_ADDR(bp)); + bno = xfs_daddr_to_agbno(cur->bc_mp, XFS_BUF_ADDR(bp)); error = xfs_alloc_put_freelist(cur->bc_tp, agbp, NULL, bno, 1); if (error) return error; diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c index f7cdc28aff41..5fde1654b430 100644 --- a/fs/xfs/xfs_attr.c +++ b/fs/xfs/xfs_attr.c @@ -374,7 +374,7 @@ xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name, * It won't fit in the shortform, transform to a leaf block. * GROT: another possible req'mt for a double-split btree op. */ - XFS_BMAP_INIT(args.flist, args.firstblock); + xfs_bmap_init(args.flist, args.firstblock); error = xfs_attr_shortform_to_leaf(&args); if (!error) { error = xfs_bmap_finish(&args.trans, args.flist, @@ -956,7 +956,7 @@ xfs_attr_leaf_addname(xfs_da_args_t *args) * Commit that transaction so that the node_addname() call * can manage its own transactions. */ - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_attr_leaf_to_node(args); if (!error) { error = xfs_bmap_finish(&args->trans, args->flist, @@ -1057,7 +1057,7 @@ xfs_attr_leaf_addname(xfs_da_args_t *args) * If the result is small enough, shrink it all into the inode. */ if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_attr_leaf_to_shortform(bp, args, forkoff); /* bp is gone due to xfs_da_shrink_inode */ if (!error) { @@ -1135,7 +1135,7 @@ xfs_attr_leaf_removename(xfs_da_args_t *args) * If the result is small enough, shrink it all into the inode. */ if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_attr_leaf_to_shortform(bp, args, forkoff); /* bp is gone due to xfs_da_shrink_inode */ if (!error) { @@ -1290,7 +1290,7 @@ restart: * have been a b-tree. */ xfs_da_state_free(state); - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_attr_leaf_to_node(args); if (!error) { error = xfs_bmap_finish(&args->trans, @@ -1331,7 +1331,7 @@ restart: * in the index/blkno/rmtblkno/rmtblkcnt fields and * in the index2/blkno2/rmtblkno2/rmtblkcnt2 fields. */ - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_da_split(state); if (!error) { error = xfs_bmap_finish(&args->trans, args->flist, @@ -1443,7 +1443,7 @@ restart: * Check to see if the tree needs to be collapsed. */ if (retval && (state->path.active > 1)) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_da_join(state); if (!error) { error = xfs_bmap_finish(&args->trans, @@ -1579,7 +1579,7 @@ xfs_attr_node_removename(xfs_da_args_t *args) * Check to see if the tree needs to be collapsed. */ if (retval && (state->path.active > 1)) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_da_join(state); if (!error) { error = xfs_bmap_finish(&args->trans, args->flist, @@ -1630,7 +1630,7 @@ xfs_attr_node_removename(xfs_da_args_t *args) == XFS_ATTR_LEAF_MAGIC); if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_attr_leaf_to_shortform(bp, args, forkoff); /* bp is gone due to xfs_da_shrink_inode */ if (!error) { @@ -2069,7 +2069,7 @@ xfs_attr_rmtval_set(xfs_da_args_t *args) /* * Allocate a single extent, up to the size of the value. */ - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); nmap = 1; error = xfs_bmapi(args->trans, dp, (xfs_fileoff_t)lblkno, blkcnt, @@ -2123,7 +2123,7 @@ xfs_attr_rmtval_set(xfs_da_args_t *args) /* * Try to remember where we decided to put the value. */ - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); nmap = 1; error = xfs_bmapi(NULL, dp, (xfs_fileoff_t)lblkno, args->rmtblkcnt, @@ -2188,7 +2188,7 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) /* * Try to remember where we decided to put the value. */ - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); nmap = 1; error = xfs_bmapi(NULL, args->dp, (xfs_fileoff_t)lblkno, args->rmtblkcnt, @@ -2229,7 +2229,7 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) blkcnt = args->rmtblkcnt; done = 0; while (!done) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_bunmapi(args->trans, args->dp, lblkno, blkcnt, XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA, 1, args->firstblock, args->flist, diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index 138308e70d14..c852cd65aaea 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -595,9 +595,9 @@ xfs_bmap_add_extent( xfs_iext_insert(ifp, 0, 1, new); ASSERT(cur == NULL); ifp->if_lastex = 0; - if (!ISNULLSTARTBLOCK(new->br_startblock)) { + if (!isnullstartblock(new->br_startblock)) { XFS_IFORK_NEXT_SET(ip, whichfork, 1); - logflags = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork); + logflags = XFS_ILOG_CORE | xfs_ilog_fext(whichfork); } else logflags = 0; /* DELTA: single new extent */ @@ -613,7 +613,7 @@ xfs_bmap_add_extent( /* * Any kind of new delayed allocation goes here. */ - else if (ISNULLSTARTBLOCK(new->br_startblock)) { + else if (isnullstartblock(new->br_startblock)) { if (cur) ASSERT((cur->bc_private.b.flags & XFS_BTCUR_BPRV_WASDEL) == 0); @@ -644,11 +644,11 @@ xfs_bmap_add_extent( * in a delayed or unwritten allocation with a real one, or * converting real back to unwritten. */ - if (!ISNULLSTARTBLOCK(new->br_startblock) && + if (!isnullstartblock(new->br_startblock) && new->br_startoff + new->br_blockcount > prev.br_startoff) { if (prev.br_state != XFS_EXT_UNWRITTEN && - ISNULLSTARTBLOCK(prev.br_startblock)) { - da_old = STARTBLOCKVAL(prev.br_startblock); + isnullstartblock(prev.br_startblock)) { + da_old = startblockval(prev.br_startblock); if (cur) ASSERT(cur->bc_private.b.flags & XFS_BTCUR_BPRV_WASDEL); @@ -803,7 +803,7 @@ xfs_bmap_add_extent_delay_real( */ if (STATE_SET_TEST(LEFT_VALID, idx > 0)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &LEFT); - STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(LEFT.br_startblock)); + STATE_SET(LEFT_DELAY, isnullstartblock(LEFT.br_startblock)); } STATE_SET(LEFT_CONTIG, STATE_TEST(LEFT_VALID) && !STATE_TEST(LEFT_DELAY) && @@ -820,7 +820,7 @@ xfs_bmap_add_extent_delay_real( idx < ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t) - 1)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx + 1), &RIGHT); - STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(RIGHT.br_startblock)); + STATE_SET(RIGHT_DELAY, isnullstartblock(RIGHT.br_startblock)); } STATE_SET(RIGHT_CONTIG, STATE_TEST(RIGHT_VALID) && !STATE_TEST(RIGHT_DELAY) && @@ -1019,8 +1019,8 @@ xfs_bmap_add_extent_delay_real( goto done; } temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), - STARTBLOCKVAL(PREV.br_startblock)); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + startblockval(PREV.br_startblock)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("LF|LC", ip, idx, XFS_DATA_FORK); *dnew = temp; /* DELTA: The boundary between two in-core extents moved. */ @@ -1067,10 +1067,10 @@ xfs_bmap_add_extent_delay_real( goto done; } temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), - STARTBLOCKVAL(PREV.br_startblock) - + startblockval(PREV.br_startblock) - (cur ? cur->bc_private.b.allocated : 0)); ep = xfs_iext_get_ext(ifp, idx + 1); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("LF", ip, idx + 1, XFS_DATA_FORK); *dnew = temp; /* DELTA: One in-core extent is split in two. */ @@ -1110,8 +1110,8 @@ xfs_bmap_add_extent_delay_real( goto done; } temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), - STARTBLOCKVAL(PREV.br_startblock)); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + startblockval(PREV.br_startblock)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("RF|RC", ip, idx, XFS_DATA_FORK); *dnew = temp; /* DELTA: The boundary between two in-core extents moved. */ @@ -1157,10 +1157,10 @@ xfs_bmap_add_extent_delay_real( goto done; } temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), - STARTBLOCKVAL(PREV.br_startblock) - + startblockval(PREV.br_startblock) - (cur ? cur->bc_private.b.allocated : 0)); ep = xfs_iext_get_ext(ifp, idx); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("RF", ip, idx, XFS_DATA_FORK); *dnew = temp; /* DELTA: One in-core extent is split in two. */ @@ -1213,7 +1213,7 @@ xfs_bmap_add_extent_delay_real( } temp = xfs_bmap_worst_indlen(ip, temp); temp2 = xfs_bmap_worst_indlen(ip, temp2); - diff = (int)(temp + temp2 - STARTBLOCKVAL(PREV.br_startblock) - + diff = (int)(temp + temp2 - startblockval(PREV.br_startblock) - (cur ? cur->bc_private.b.allocated : 0)); if (diff > 0 && xfs_mod_incore_sb(ip->i_mount, XFS_SBS_FDBLOCKS, -((int64_t)diff), rsvd)) { @@ -1241,11 +1241,11 @@ xfs_bmap_add_extent_delay_real( } } ep = xfs_iext_get_ext(ifp, idx); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("0", ip, idx, XFS_DATA_FORK); XFS_BMAP_TRACE_PRE_UPDATE("0", ip, idx + 2, XFS_DATA_FORK); xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx + 2), - NULLSTARTBLOCK((int)temp2)); + nullstartblock((int)temp2)); XFS_BMAP_TRACE_POST_UPDATE("0", ip, idx + 2, XFS_DATA_FORK); *dnew = temp + temp2; /* DELTA: One in-core extent is split in three. */ @@ -1365,7 +1365,7 @@ xfs_bmap_add_extent_unwritten_real( */ if (STATE_SET_TEST(LEFT_VALID, idx > 0)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &LEFT); - STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(LEFT.br_startblock)); + STATE_SET(LEFT_DELAY, isnullstartblock(LEFT.br_startblock)); } STATE_SET(LEFT_CONTIG, STATE_TEST(LEFT_VALID) && !STATE_TEST(LEFT_DELAY) && @@ -1382,7 +1382,7 @@ xfs_bmap_add_extent_unwritten_real( idx < ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t) - 1)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx + 1), &RIGHT); - STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(RIGHT.br_startblock)); + STATE_SET(RIGHT_DELAY, isnullstartblock(RIGHT.br_startblock)); } STATE_SET(RIGHT_CONTIG, STATE_TEST(RIGHT_VALID) && !STATE_TEST(RIGHT_DELAY) && @@ -1889,13 +1889,13 @@ xfs_bmap_add_extent_hole_delay( ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK); ep = xfs_iext_get_ext(ifp, idx); state = 0; - ASSERT(ISNULLSTARTBLOCK(new->br_startblock)); + ASSERT(isnullstartblock(new->br_startblock)); /* * Check and set flags if this segment has a left neighbor */ if (STATE_SET_TEST(LEFT_VALID, idx > 0)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &left); - STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(left.br_startblock)); + STATE_SET(LEFT_DELAY, isnullstartblock(left.br_startblock)); } /* * Check and set flags if the current (right) segment exists. @@ -1905,7 +1905,7 @@ xfs_bmap_add_extent_hole_delay( idx < ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t))) { xfs_bmbt_get_all(ep, &right); - STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(right.br_startblock)); + STATE_SET(RIGHT_DELAY, isnullstartblock(right.br_startblock)); } /* * Set contiguity flags on the left and right neighbors. @@ -1938,12 +1938,12 @@ xfs_bmap_add_extent_hole_delay( XFS_BMAP_TRACE_PRE_UPDATE("LC|RC", ip, idx - 1, XFS_DATA_FORK); xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, idx - 1), temp); - oldlen = STARTBLOCKVAL(left.br_startblock) + - STARTBLOCKVAL(new->br_startblock) + - STARTBLOCKVAL(right.br_startblock); + oldlen = startblockval(left.br_startblock) + + startblockval(new->br_startblock) + + startblockval(right.br_startblock); newlen = xfs_bmap_worst_indlen(ip, temp); xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx - 1), - NULLSTARTBLOCK((int)newlen)); + nullstartblock((int)newlen)); XFS_BMAP_TRACE_POST_UPDATE("LC|RC", ip, idx - 1, XFS_DATA_FORK); XFS_BMAP_TRACE_DELETE("LC|RC", ip, idx, 1, XFS_DATA_FORK); @@ -1964,11 +1964,11 @@ xfs_bmap_add_extent_hole_delay( XFS_BMAP_TRACE_PRE_UPDATE("LC", ip, idx - 1, XFS_DATA_FORK); xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, idx - 1), temp); - oldlen = STARTBLOCKVAL(left.br_startblock) + - STARTBLOCKVAL(new->br_startblock); + oldlen = startblockval(left.br_startblock) + + startblockval(new->br_startblock); newlen = xfs_bmap_worst_indlen(ip, temp); xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx - 1), - NULLSTARTBLOCK((int)newlen)); + nullstartblock((int)newlen)); XFS_BMAP_TRACE_POST_UPDATE("LC", ip, idx - 1, XFS_DATA_FORK); ip->i_df.if_lastex = idx - 1; @@ -1985,11 +1985,11 @@ xfs_bmap_add_extent_hole_delay( */ XFS_BMAP_TRACE_PRE_UPDATE("RC", ip, idx, XFS_DATA_FORK); temp = new->br_blockcount + right.br_blockcount; - oldlen = STARTBLOCKVAL(new->br_startblock) + - STARTBLOCKVAL(right.br_startblock); + oldlen = startblockval(new->br_startblock) + + startblockval(right.br_startblock); newlen = xfs_bmap_worst_indlen(ip, temp); xfs_bmbt_set_allf(ep, new->br_startoff, - NULLSTARTBLOCK((int)newlen), temp, right.br_state); + nullstartblock((int)newlen), temp, right.br_state); XFS_BMAP_TRACE_POST_UPDATE("RC", ip, idx, XFS_DATA_FORK); ip->i_df.if_lastex = idx; /* DELTA: One in-core extent grew into a hole. */ @@ -2085,7 +2085,7 @@ xfs_bmap_add_extent_hole_real( */ if (STATE_SET_TEST(LEFT_VALID, idx > 0)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &left); - STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(left.br_startblock)); + STATE_SET(LEFT_DELAY, isnullstartblock(left.br_startblock)); } /* * Check and set flags if this segment has a current value. @@ -2095,7 +2095,7 @@ xfs_bmap_add_extent_hole_real( idx < ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t))) { xfs_bmbt_get_all(ep, &right); - STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(right.br_startblock)); + STATE_SET(RIGHT_DELAY, isnullstartblock(right.br_startblock)); } /* * We're inserting a real allocation between "left" and "right". @@ -2143,7 +2143,7 @@ xfs_bmap_add_extent_hole_real( XFS_IFORK_NEXT_SET(ip, whichfork, XFS_IFORK_NEXTENTS(ip, whichfork) - 1); if (cur == NULL) { - rval = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork); + rval = XFS_ILOG_CORE | xfs_ilog_fext(whichfork); } else { rval = XFS_ILOG_CORE; if ((error = xfs_bmbt_lookup_eq(cur, @@ -2185,7 +2185,7 @@ xfs_bmap_add_extent_hole_real( XFS_BMAP_TRACE_POST_UPDATE("LC", ip, idx - 1, whichfork); ifp->if_lastex = idx - 1; if (cur == NULL) { - rval = XFS_ILOG_FEXT(whichfork); + rval = xfs_ilog_fext(whichfork); } else { rval = 0; if ((error = xfs_bmbt_lookup_eq(cur, @@ -2220,7 +2220,7 @@ xfs_bmap_add_extent_hole_real( XFS_BMAP_TRACE_POST_UPDATE("RC", ip, idx, whichfork); ifp->if_lastex = idx; if (cur == NULL) { - rval = XFS_ILOG_FEXT(whichfork); + rval = xfs_ilog_fext(whichfork); } else { rval = 0; if ((error = xfs_bmbt_lookup_eq(cur, @@ -2254,7 +2254,7 @@ xfs_bmap_add_extent_hole_real( XFS_IFORK_NEXT_SET(ip, whichfork, XFS_IFORK_NEXTENTS(ip, whichfork) + 1); if (cur == NULL) { - rval = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork); + rval = XFS_ILOG_CORE | xfs_ilog_fext(whichfork); } else { rval = XFS_ILOG_CORE; if ((error = xfs_bmbt_lookup_eq(cur, @@ -2482,7 +2482,7 @@ xfs_bmap_adjacent( * try to use it's last block as our starting point. */ if (ap->eof && ap->prevp->br_startoff != NULLFILEOFF && - !ISNULLSTARTBLOCK(ap->prevp->br_startblock) && + !isnullstartblock(ap->prevp->br_startblock) && ISVALID(ap->prevp->br_startblock + ap->prevp->br_blockcount, ap->prevp->br_startblock)) { ap->rval = ap->prevp->br_startblock + ap->prevp->br_blockcount; @@ -2511,7 +2511,7 @@ xfs_bmap_adjacent( * start block based on it. */ if (ap->prevp->br_startoff != NULLFILEOFF && - !ISNULLSTARTBLOCK(ap->prevp->br_startblock) && + !isnullstartblock(ap->prevp->br_startblock) && (prevbno = ap->prevp->br_startblock + ap->prevp->br_blockcount) && ISVALID(prevbno, ap->prevp->br_startblock)) { @@ -2552,7 +2552,7 @@ xfs_bmap_adjacent( * If there's a following (right) block, select a requested * start block based on it. */ - if (!ISNULLSTARTBLOCK(ap->gotp->br_startblock)) { + if (!isnullstartblock(ap->gotp->br_startblock)) { /* * Calculate gap to start of next block. */ @@ -3082,7 +3082,7 @@ xfs_bmap_btree_to_extents( ASSERT(ifp->if_broot == NULL); ASSERT((ifp->if_flags & XFS_IFBROOT) == 0); XFS_IFORK_FMT_SET(ip, whichfork, XFS_DINODE_FMT_EXTENTS); - *logflagsp = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork); + *logflagsp = XFS_ILOG_CORE | xfs_ilog_fext(whichfork); return 0; } @@ -3136,8 +3136,8 @@ xfs_bmap_del_extent( del_endoff = del->br_startoff + del->br_blockcount; got_endoff = got.br_startoff + got.br_blockcount; ASSERT(got_endoff >= del_endoff); - delay = ISNULLSTARTBLOCK(got.br_startblock); - ASSERT(ISNULLSTARTBLOCK(del->br_startblock) == delay); + delay = isnullstartblock(got.br_startblock); + ASSERT(isnullstartblock(del->br_startblock) == delay); flags = 0; qfield = 0; error = 0; @@ -3189,7 +3189,7 @@ xfs_bmap_del_extent( } da_old = da_new = 0; } else { - da_old = STARTBLOCKVAL(got.br_startblock); + da_old = startblockval(got.br_startblock); da_new = 0; nblks = 0; do_fx = 0; @@ -3213,7 +3213,7 @@ xfs_bmap_del_extent( XFS_IFORK_NEXTENTS(ip, whichfork) - 1); flags |= XFS_ILOG_CORE; if (!cur) { - flags |= XFS_ILOG_FEXT(whichfork); + flags |= xfs_ilog_fext(whichfork); break; } if ((error = xfs_btree_delete(cur, &i))) @@ -3233,7 +3233,7 @@ xfs_bmap_del_extent( if (delay) { temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), da_old); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("2", ip, idx, whichfork); da_new = temp; @@ -3242,7 +3242,7 @@ xfs_bmap_del_extent( xfs_bmbt_set_startblock(ep, del_endblock); XFS_BMAP_TRACE_POST_UPDATE("2", ip, idx, whichfork); if (!cur) { - flags |= XFS_ILOG_FEXT(whichfork); + flags |= xfs_ilog_fext(whichfork); break; } if ((error = xfs_bmbt_update(cur, del_endoff, del_endblock, @@ -3262,7 +3262,7 @@ xfs_bmap_del_extent( if (delay) { temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), da_old); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("1", ip, idx, whichfork); da_new = temp; @@ -3270,7 +3270,7 @@ xfs_bmap_del_extent( } XFS_BMAP_TRACE_POST_UPDATE("1", ip, idx, whichfork); if (!cur) { - flags |= XFS_ILOG_FEXT(whichfork); + flags |= xfs_ilog_fext(whichfork); break; } if ((error = xfs_bmbt_update(cur, got.br_startoff, @@ -3345,22 +3345,22 @@ xfs_bmap_del_extent( } XFS_WANT_CORRUPTED_GOTO(i == 1, done); } else - flags |= XFS_ILOG_FEXT(whichfork); + flags |= xfs_ilog_fext(whichfork); XFS_IFORK_NEXT_SET(ip, whichfork, XFS_IFORK_NEXTENTS(ip, whichfork) + 1); } else { ASSERT(whichfork == XFS_DATA_FORK); temp = xfs_bmap_worst_indlen(ip, temp); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); temp2 = xfs_bmap_worst_indlen(ip, temp2); - new.br_startblock = NULLSTARTBLOCK((int)temp2); + new.br_startblock = nullstartblock((int)temp2); da_new = temp + temp2; while (da_new > da_old) { if (temp) { temp--; da_new--; xfs_bmbt_set_startblock(ep, - NULLSTARTBLOCK((int)temp)); + nullstartblock((int)temp)); } if (da_new == da_old) break; @@ -3368,7 +3368,7 @@ xfs_bmap_del_extent( temp2--; da_new--; new.br_startblock = - NULLSTARTBLOCK((int)temp2); + nullstartblock((int)temp2); } } } @@ -3545,7 +3545,7 @@ xfs_bmap_extents_to_btree( nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t); for (cnt = i = 0; i < nextents; i++) { ep = xfs_iext_get_ext(ifp, i); - if (!ISNULLSTARTBLOCK(xfs_bmbt_get_startblock(ep))) { + if (!isnullstartblock(xfs_bmbt_get_startblock(ep))) { arp->l0 = cpu_to_be64(ep->l0); arp->l1 = cpu_to_be64(ep->l1); arp++; cnt++; @@ -3572,7 +3572,7 @@ xfs_bmap_extents_to_btree( xfs_btree_log_recs(cur, abp, 1, be16_to_cpu(ablock->bb_numrecs)); ASSERT(*curp == NULL); *curp = cur; - *logflagsp = XFS_ILOG_CORE | XFS_ILOG_FBROOT(whichfork); + *logflagsp = XFS_ILOG_CORE | xfs_ilog_fbroot(whichfork); return 0; } @@ -3676,7 +3676,7 @@ xfs_bmap_local_to_extents( ip->i_d.di_nblocks = 1; XFS_TRANS_MOD_DQUOT_BYINO(args.mp, tp, ip, XFS_TRANS_DQ_BCOUNT, 1L); - flags |= XFS_ILOG_FEXT(whichfork); + flags |= xfs_ilog_fext(whichfork); } else { ASSERT(XFS_IFORK_NEXTENTS(ip, whichfork) == 0); xfs_bmap_forkoff_reset(ip->i_mount, ip, whichfork); @@ -4082,7 +4082,7 @@ xfs_bmap_add_attrfork( XFS_IFORK_ASIZE(ip) / (uint)sizeof(xfs_bmbt_rec_t); ip->i_afp->if_flags = XFS_IFEXTENTS; logflags = 0; - XFS_BMAP_INIT(&flist, &firstblock); + xfs_bmap_init(&flist, &firstblock); switch (ip->i_d.di_format) { case XFS_DINODE_FMT_LOCAL: error = xfs_bmap_add_attrfork_local(tp, ip, &firstblock, &flist, @@ -4162,7 +4162,7 @@ xfs_bmap_add_free( ASSERT(bno != NULLFSBLOCK); ASSERT(len > 0); ASSERT(len <= MAXEXTLEN); - ASSERT(!ISNULLSTARTBLOCK(bno)); + ASSERT(!isnullstartblock(bno)); agno = XFS_FSB_TO_AGNO(mp, bno); agbno = XFS_FSB_TO_AGBNO(mp, bno); ASSERT(agno < mp->m_sb.sb_agcount); @@ -4909,7 +4909,7 @@ xfs_bmapi( got.br_startoff = end; inhole = eof || got.br_startoff > bno; wasdelay = wr && !inhole && !(flags & XFS_BMAPI_DELAY) && - ISNULLSTARTBLOCK(got.br_startblock); + isnullstartblock(got.br_startblock); /* * First, deal with the hole before the allocated space * that we found, if any. @@ -5028,7 +5028,7 @@ xfs_bmapi( } ip->i_delayed_blks += alen; - abno = NULLSTARTBLOCK(indlen); + abno = nullstartblock(indlen); } else { /* * If first time, allocate and fill in @@ -5144,8 +5144,8 @@ xfs_bmapi( aoff + alen); #ifdef DEBUG if (flags & XFS_BMAPI_DELAY) { - ASSERT(ISNULLSTARTBLOCK(got.br_startblock)); - ASSERT(STARTBLOCKVAL(got.br_startblock) > 0); + ASSERT(isnullstartblock(got.br_startblock)); + ASSERT(startblockval(got.br_startblock) > 0); } ASSERT(got.br_state == XFS_EXT_NORM || got.br_state == XFS_EXT_UNWRITTEN); @@ -5179,7 +5179,7 @@ xfs_bmapi( ASSERT((bno >= obno) || (n == 0)); ASSERT(bno < end); mval->br_startoff = bno; - if (ISNULLSTARTBLOCK(got.br_startblock)) { + if (isnullstartblock(got.br_startblock)) { ASSERT(!wr || (flags & XFS_BMAPI_DELAY)); mval->br_startblock = DELAYSTARTBLOCK; } else @@ -5201,7 +5201,7 @@ xfs_bmapi( ASSERT(mval->br_blockcount <= len); } else { *mval = got; - if (ISNULLSTARTBLOCK(mval->br_startblock)) { + if (isnullstartblock(mval->br_startblock)) { ASSERT(!wr || (flags & XFS_BMAPI_DELAY)); mval->br_startblock = DELAYSTARTBLOCK; } @@ -5329,12 +5329,12 @@ error0: * Log everything. Do this after conversion, there's no point in * logging the extent records if we've converted to btree format. */ - if ((logflags & XFS_ILOG_FEXT(whichfork)) && + if ((logflags & xfs_ilog_fext(whichfork)) && XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS) - logflags &= ~XFS_ILOG_FEXT(whichfork); - else if ((logflags & XFS_ILOG_FBROOT(whichfork)) && + logflags &= ~xfs_ilog_fext(whichfork); + else if ((logflags & xfs_ilog_fbroot(whichfork)) && XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE) - logflags &= ~XFS_ILOG_FBROOT(whichfork); + logflags &= ~xfs_ilog_fbroot(whichfork); /* * Log whatever the flags say, even if error. Otherwise we might miss * detecting a case where the data is changed, there's an error, @@ -5411,7 +5411,7 @@ xfs_bmapi_single( *fsb = NULLFSBLOCK; return 0; } - ASSERT(!ISNULLSTARTBLOCK(got.br_startblock)); + ASSERT(!isnullstartblock(got.br_startblock)); ASSERT(bno < got.br_startoff + got.br_blockcount); *fsb = got.br_startblock + (bno - got.br_startoff); ifp->if_lastex = lastx; @@ -5543,7 +5543,7 @@ xfs_bunmapi( */ ASSERT(ep != NULL); del = got; - wasdel = ISNULLSTARTBLOCK(del.br_startblock); + wasdel = isnullstartblock(del.br_startblock); if (got.br_startoff < start) { del.br_startoff = start; del.br_blockcount -= start - got.br_startoff; @@ -5638,7 +5638,7 @@ xfs_bunmapi( xfs_bmbt_get_all(xfs_iext_get_ext(ifp, lastx - 1), &prev); ASSERT(prev.br_state == XFS_EXT_NORM); - ASSERT(!ISNULLSTARTBLOCK(prev.br_startblock)); + ASSERT(!isnullstartblock(prev.br_startblock)); ASSERT(del.br_startblock == prev.br_startblock + prev.br_blockcount); if (prev.br_startoff < start) { @@ -5666,7 +5666,7 @@ xfs_bunmapi( } } if (wasdel) { - ASSERT(STARTBLOCKVAL(del.br_startblock) > 0); + ASSERT(startblockval(del.br_startblock) > 0); /* Update realtime/data freespace, unreserve quota */ if (isrt) { xfs_filblks_t rtexts; @@ -5782,12 +5782,12 @@ error0: * Log everything. Do this after conversion, there's no point in * logging the extent records if we've converted to btree format. */ - if ((logflags & XFS_ILOG_FEXT(whichfork)) && + if ((logflags & xfs_ilog_fext(whichfork)) && XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS) - logflags &= ~XFS_ILOG_FEXT(whichfork); - else if ((logflags & XFS_ILOG_FBROOT(whichfork)) && + logflags &= ~xfs_ilog_fext(whichfork); + else if ((logflags & xfs_ilog_fbroot(whichfork)) && XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE) - logflags &= ~XFS_ILOG_FBROOT(whichfork); + logflags &= ~xfs_ilog_fbroot(whichfork); /* * Log inode even in the error case, if the transaction * is dirty we'll need to shut down the filesystem. @@ -5838,7 +5838,7 @@ xfs_getbmapx_fix_eof_hole( if (startblock == DELAYSTARTBLOCK) out->bmv_block = -2; else - out->bmv_block = XFS_FSB_TO_DB(ip, startblock); + out->bmv_block = xfs_fsb_to_db(ip, startblock); fileblock = XFS_BB_TO_FSB(ip->i_mount, out->bmv_offset); ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK); if (xfs_iext_bno_to_ext(ifp, fileblock, &lastx) && @@ -5979,7 +5979,7 @@ xfs_getbmap( if (nex > XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1) nex = XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1; - bmapi_flags = XFS_BMAPI_AFLAG(whichfork) | + bmapi_flags = xfs_bmapi_aflag(whichfork) | ((iflags & BMV_IF_PREALLOC) ? 0 : XFS_BMAPI_IGSTATE); /* @@ -6098,7 +6098,7 @@ xfs_bmap_isaeof( */ *aeof = (off >= s.br_startoff && off < s.br_startoff + s.br_blockcount && - ISNULLSTARTBLOCK(s.br_startblock)) || + isnullstartblock(s.br_startblock)) || off >= s.br_startoff + s.br_blockcount; return 0; } diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h index 284571c05ed0..be2979d88d32 100644 --- a/fs/xfs/xfs_bmap.h +++ b/fs/xfs/xfs_bmap.h @@ -95,7 +95,6 @@ typedef struct xfs_bmap_free /* need write cache flushing and no */ /* additional allocation alignments */ -#define XFS_BMAPI_AFLAG(w) xfs_bmapi_aflag(w) static inline int xfs_bmapi_aflag(int w) { return (w == XFS_ATTR_FORK ? XFS_BMAPI_ATTRFORK : 0); @@ -107,7 +106,6 @@ static inline int xfs_bmapi_aflag(int w) #define DELAYSTARTBLOCK ((xfs_fsblock_t)-1LL) #define HOLESTARTBLOCK ((xfs_fsblock_t)-2LL) -#define XFS_BMAP_INIT(flp,fbp) xfs_bmap_init(flp,fbp) static inline void xfs_bmap_init(xfs_bmap_free_t *flp, xfs_fsblock_t *fbp) { ((flp)->xbf_first = NULL, (flp)->xbf_count = 0, \ diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c index ba6b08c2fb02..0760d352586f 100644 --- a/fs/xfs/xfs_bmap_btree.c +++ b/fs/xfs/xfs_bmap_btree.c @@ -121,7 +121,7 @@ __xfs_bmbt_get_all( b = (((xfs_dfsbno_t)l0 & xfs_mask64lo(9)) << 43) | (((xfs_dfsbno_t)l1) >> 21); - ASSERT((b >> 32) == 0 || ISNULLDSTARTBLOCK(b)); + ASSERT((b >> 32) == 0 || isnulldstartblock(b)); s->br_startblock = (xfs_fsblock_t)b; } #else /* !DEBUG */ @@ -172,7 +172,7 @@ xfs_bmbt_get_startblock( b = (((xfs_dfsbno_t)r->l0 & xfs_mask64lo(9)) << 43) | (((xfs_dfsbno_t)r->l1) >> 21); - ASSERT((b >> 32) == 0 || ISNULLDSTARTBLOCK(b)); + ASSERT((b >> 32) == 0 || isnulldstartblock(b)); return (xfs_fsblock_t)b; #else /* !DEBUG */ return (xfs_fsblock_t)(((xfs_dfsbno_t)r->l1) >> 21); @@ -261,7 +261,7 @@ xfs_bmbt_set_allf( ((xfs_bmbt_rec_base_t)blockcount & (xfs_bmbt_rec_base_t)xfs_mask64lo(21)); #else /* !XFS_BIG_BLKNOS */ - if (ISNULLSTARTBLOCK(startblock)) { + if (isnullstartblock(startblock)) { r->l0 = ((xfs_bmbt_rec_base_t)extent_flag << 63) | ((xfs_bmbt_rec_base_t)startoff << 9) | (xfs_bmbt_rec_base_t)xfs_mask64lo(9); @@ -321,7 +321,7 @@ xfs_bmbt_disk_set_allf( ((xfs_bmbt_rec_base_t)blockcount & (xfs_bmbt_rec_base_t)xfs_mask64lo(21))); #else /* !XFS_BIG_BLKNOS */ - if (ISNULLSTARTBLOCK(startblock)) { + if (isnullstartblock(startblock)) { r->l0 = cpu_to_be64( ((xfs_bmbt_rec_base_t)extent_flag << 63) | ((xfs_bmbt_rec_base_t)startoff << 9) | @@ -382,7 +382,7 @@ xfs_bmbt_set_startblock( r->l1 = (r->l1 & (xfs_bmbt_rec_base_t)xfs_mask64lo(21)) | (xfs_bmbt_rec_base_t)(v << 21); #else /* !XFS_BIG_BLKNOS */ - if (ISNULLSTARTBLOCK(v)) { + if (isnullstartblock(v)) { r->l0 |= (xfs_bmbt_rec_base_t)xfs_mask64lo(9); r->l1 = (xfs_bmbt_rec_base_t)xfs_mask64hi(11) | ((xfs_bmbt_rec_base_t)v << 21) | diff --git a/fs/xfs/xfs_bmap_btree.h b/fs/xfs/xfs_bmap_btree.h index a4555abb6622..0e8df007615e 100644 --- a/fs/xfs/xfs_bmap_btree.h +++ b/fs/xfs/xfs_bmap_btree.h @@ -76,26 +76,22 @@ typedef struct xfs_bmbt_rec_host { #define DSTARTBLOCKMASK \ (((((xfs_dfsbno_t)1) << DSTARTBLOCKMASKBITS) - 1) << STARTBLOCKVALBITS) -#define ISNULLSTARTBLOCK(x) isnullstartblock(x) static inline int isnullstartblock(xfs_fsblock_t x) { return ((x) & STARTBLOCKMASK) == STARTBLOCKMASK; } -#define ISNULLDSTARTBLOCK(x) isnulldstartblock(x) static inline int isnulldstartblock(xfs_dfsbno_t x) { return ((x) & DSTARTBLOCKMASK) == DSTARTBLOCKMASK; } -#define NULLSTARTBLOCK(k) nullstartblock(k) static inline xfs_fsblock_t nullstartblock(int k) { ASSERT(k < (1 << STARTBLOCKVALBITS)); return STARTBLOCKMASK | (k); } -#define STARTBLOCKVAL(x) startblockval(x) static inline xfs_filblks_t startblockval(xfs_fsblock_t x) { return (xfs_filblks_t)((x) & ~STARTBLOCKMASK); diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c index 2c3ef20f8842..4681519ded91 100644 --- a/fs/xfs/xfs_btree.c +++ b/fs/xfs/xfs_btree.c @@ -960,7 +960,7 @@ xfs_btree_buf_to_ptr( ptr->l = cpu_to_be64(XFS_DADDR_TO_FSB(cur->bc_mp, XFS_BUF_ADDR(bp))); else { - ptr->s = cpu_to_be32(XFS_DADDR_TO_AGBNO(cur->bc_mp, + ptr->s = cpu_to_be32(xfs_daddr_to_agbno(cur->bc_mp, XFS_BUF_ADDR(bp))); } } @@ -2454,7 +2454,7 @@ xfs_btree_new_iroot( xfs_btree_log_ptrs(cur, cbp, 1, be16_to_cpu(cblock->bb_numrecs)); *logflags |= - XFS_ILOG_CORE | XFS_ILOG_FBROOT(cur->bc_private.b.whichfork); + XFS_ILOG_CORE | xfs_ilog_fbroot(cur->bc_private.b.whichfork); *stat = 1; XFS_BTREE_TRACE_CURSOR(cur, XBT_EXIT); return 0; @@ -3048,7 +3048,7 @@ xfs_btree_kill_iroot( cur->bc_bufs[level - 1] = NULL; be16_add_cpu(&block->bb_level, -1); xfs_trans_log_inode(cur->bc_tp, ip, - XFS_ILOG_CORE | XFS_ILOG_FBROOT(cur->bc_private.b.whichfork)); + XFS_ILOG_CORE | xfs_ilog_fbroot(cur->bc_private.b.whichfork)); cur->bc_nlevels--; out0: XFS_BTREE_TRACE_CURSOR(cur, XBT_EXIT); diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index a11a8390bf6c..c45f74ff1a5b 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -1597,7 +1597,7 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno) nmap = 1; ASSERT(args->firstblock != NULL); if ((error = xfs_bmapi(tp, dp, bno, count, - XFS_BMAPI_AFLAG(w)|XFS_BMAPI_WRITE|XFS_BMAPI_METADATA| + xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE|XFS_BMAPI_METADATA| XFS_BMAPI_CONTIG, args->firstblock, args->total, &map, &nmap, args->flist, NULL))) { @@ -1618,7 +1618,7 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno) nmap = MIN(XFS_BMAP_MAX_NMAP, count); c = (int)(bno + count - b); if ((error = xfs_bmapi(tp, dp, b, c, - XFS_BMAPI_AFLAG(w)|XFS_BMAPI_WRITE| + xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE| XFS_BMAPI_METADATA, args->firstblock, args->total, &mapp[mapi], &nmap, args->flist, @@ -1882,7 +1882,7 @@ xfs_da_shrink_inode(xfs_da_args_t *args, xfs_dablk_t dead_blkno, * the last block to the place we want to kill. */ if ((error = xfs_bunmapi(tp, dp, dead_blkno, count, - XFS_BMAPI_AFLAG(w)|XFS_BMAPI_METADATA, + xfs_bmapi_aflag(w)|XFS_BMAPI_METADATA, 0, args->firstblock, args->flist, NULL, &done)) == ENOSPC) { if (w != XFS_DATA_FORK) @@ -1987,7 +1987,7 @@ xfs_da_do_buf( if ((error = xfs_bmapi(trans, dp, (xfs_fileoff_t)bno, nfsb, XFS_BMAPI_METADATA | - XFS_BMAPI_AFLAG(whichfork), + xfs_bmapi_aflag(whichfork), NULL, 0, mapp, &nmap, NULL, NULL))) goto exit0; } diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c index e6ebbaeb4dc6..ab016e5ae7be 100644 --- a/fs/xfs/xfs_ialloc.c +++ b/fs/xfs/xfs_ialloc.c @@ -357,7 +357,7 @@ xfs_ialloc_ag_alloc( int ioffset = i << args.mp->m_sb.sb_inodelog; uint isize = sizeof(struct xfs_dinode); - free = XFS_MAKE_IPTR(args.mp, fbuf, i); + free = xfs_make_iptr(args.mp, fbuf, i); free->di_magic = cpu_to_be16(XFS_DINODE_MAGIC); free->di_version = version; free->di_gen = cpu_to_be32(gen); @@ -937,7 +937,7 @@ nextag: } } } - offset = XFS_IALLOC_FIND_FREE(&rec.ir_free); + offset = xfs_ialloc_find_free(&rec.ir_free); ASSERT(offset >= 0); ASSERT(offset < XFS_INODES_PER_CHUNK); ASSERT((XFS_AGINO_TO_OFFSET(mp, rec.ir_startino) % @@ -1279,7 +1279,7 @@ xfs_imap( offset = XFS_INO_TO_OFFSET(mp, ino); ASSERT(offset < mp->m_sb.sb_inopblock); - cluster_agbno = XFS_DADDR_TO_AGBNO(mp, imap->im_blkno); + cluster_agbno = xfs_daddr_to_agbno(mp, imap->im_blkno); offset += (agbno - cluster_agbno) * mp->m_sb.sb_inopblock; imap->im_len = XFS_FSB_TO_BB(mp, blks_per_cluster); diff --git a/fs/xfs/xfs_ialloc.h b/fs/xfs/xfs_ialloc.h index 50f558a4e0a8..aeee8278f92c 100644 --- a/fs/xfs/xfs_ialloc.h +++ b/fs/xfs/xfs_ialloc.h @@ -39,7 +39,6 @@ struct xfs_trans; /* * Make an inode pointer out of the buffer/offset. */ -#define XFS_MAKE_IPTR(mp,b,o) xfs_make_iptr(mp,b,o) static inline struct xfs_dinode * xfs_make_iptr(struct xfs_mount *mp, struct xfs_buf *b, int o) { @@ -50,7 +49,6 @@ xfs_make_iptr(struct xfs_mount *mp, struct xfs_buf *b, int o) /* * Find a free (set) bit in the inode bitmask. */ -#define XFS_IALLOC_FIND_FREE(fp) xfs_ialloc_find_free(fp) static inline int xfs_ialloc_find_free(xfs_inofree_t *fp) { return xfs_lowbit64(*fp); diff --git a/fs/xfs/xfs_ialloc_btree.h b/fs/xfs/xfs_ialloc_btree.h index 37e5dd01a577..5580e255ff06 100644 --- a/fs/xfs/xfs_ialloc_btree.h +++ b/fs/xfs/xfs_ialloc_btree.h @@ -36,7 +36,6 @@ typedef __uint64_t xfs_inofree_t; #define XFS_INODES_PER_CHUNK_LOG (XFS_NBBYLOG + 3) #define XFS_INOBT_ALL_FREE ((xfs_inofree_t)-1) -#define XFS_INOBT_MASKN(i,n) xfs_inobt_maskn(i,n) static inline xfs_inofree_t xfs_inobt_maskn(int i, int n) { return (((n) >= XFS_INODES_PER_CHUNK ? \ diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 323ecd76a12c..e7ae08d1df48 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -1614,10 +1614,10 @@ xfs_itruncate_finish( * in this file with garbage in them once recovery * runs. */ - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); error = xfs_bunmapi(ntp, ip, first_unmap_block, unmap_len, - XFS_BMAPI_AFLAG(fork) | + xfs_bmapi_aflag(fork) | (sync ? 0 : XFS_BMAPI_ASYNC), XFS_ITRUNC_MAX_EXTENTS, &first_block, &free_list, @@ -2570,7 +2570,7 @@ xfs_iextents_copy( for (i = 0; i < nrecs; i++) { xfs_bmbt_rec_host_t *ep = xfs_iext_get_ext(ifp, i); start_block = xfs_bmbt_get_startblock(ep); - if (ISNULLSTARTBLOCK(start_block)) { + if (isnullstartblock(start_block)) { /* * It's a delayed allocation extent, so skip it. */ diff --git a/fs/xfs/xfs_inode_item.h b/fs/xfs/xfs_inode_item.h index 1ff04cc323ad..9957d0602d54 100644 --- a/fs/xfs/xfs_inode_item.h +++ b/fs/xfs/xfs_inode_item.h @@ -111,20 +111,16 @@ typedef struct xfs_inode_log_format_64 { #define XFS_ILI_IOLOCKED_ANY (XFS_ILI_IOLOCKED_EXCL | XFS_ILI_IOLOCKED_SHARED) - -#define XFS_ILOG_FBROOT(w) xfs_ilog_fbroot(w) static inline int xfs_ilog_fbroot(int w) { return (w == XFS_DATA_FORK ? XFS_ILOG_DBROOT : XFS_ILOG_ABROOT); } -#define XFS_ILOG_FEXT(w) xfs_ilog_fext(w) static inline int xfs_ilog_fext(int w) { return (w == XFS_DATA_FORK ? XFS_ILOG_DEXT : XFS_ILOG_AEXT); } -#define XFS_ILOG_FDATA(w) xfs_ilog_fdata(w) static inline int xfs_ilog_fdata(int w) { return (w == XFS_DATA_FORK ? XFS_ILOG_DDATA : XFS_ILOG_ADATA); diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c index 911062cf73a6..08ce72316bfe 100644 --- a/fs/xfs/xfs_iomap.c +++ b/fs/xfs/xfs_iomap.c @@ -155,7 +155,7 @@ xfs_imap_to_bmap( iomapp->iomap_bn = IOMAP_DADDR_NULL; iomapp->iomap_flags |= IOMAP_DELAY; } else { - iomapp->iomap_bn = XFS_FSB_TO_DB(ip, start_block); + iomapp->iomap_bn = xfs_fsb_to_db(ip, start_block); if (ISUNWRITTEN(imap)) iomapp->iomap_flags |= IOMAP_UNWRITTEN; } @@ -261,7 +261,7 @@ xfs_iomap( xfs_iunlock(ip, lockmode); lockmode = 0; - if (nimaps && !ISNULLSTARTBLOCK(imap.br_startblock)) { + if (nimaps && !isnullstartblock(imap.br_startblock)) { xfs_iomap_map_trace(XFS_IOMAP_WRITE_MAP, ip, offset, count, iomapp, &imap, flags); break; @@ -491,7 +491,7 @@ xfs_iomap_write_direct( /* * Issue the xfs_bmapi() call to allocate the blocks */ - XFS_BMAP_INIT(&free_list, &firstfsb); + xfs_bmap_init(&free_list, &firstfsb); nimaps = 1; error = xfs_bmapi(tp, ip, offset_fsb, count_fsb, bmapi_flag, &firstfsb, 0, &imap, &nimaps, &free_list, NULL); @@ -751,7 +751,7 @@ xfs_iomap_write_allocate( xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL); xfs_trans_ihold(tp, ip); - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); /* * it is possible that the extents have changed since @@ -911,7 +911,7 @@ xfs_iomap_write_unwritten( /* * Modify the unwritten extent state of the buffer. */ - XFS_BMAP_INIT(&free_list, &firstfsb); + xfs_bmap_init(&free_list, &firstfsb); nimaps = 1; error = xfs_bmapi(tp, ip, offset_fsb, count_fsb, XFS_BMAPI_WRITE|XFS_BMAPI_CONVERT, &firstfsb, diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c index e19d0a8d5618..cf98a805ec90 100644 --- a/fs/xfs/xfs_itable.c +++ b/fs/xfs/xfs_itable.c @@ -453,7 +453,7 @@ xfs_bulkstat( (chunkidx = agino - gino + 1) < XFS_INODES_PER_CHUNK && /* there are some left allocated */ - XFS_INOBT_MASKN(chunkidx, + xfs_inobt_maskn(chunkidx, XFS_INODES_PER_CHUNK - chunkidx) & ~gfree) { /* * Grab the chunk record. Mark all the @@ -464,7 +464,7 @@ xfs_bulkstat( if (XFS_INOBT_MASK(i) & ~gfree) gcnt++; } - gfree |= XFS_INOBT_MASKN(0, chunkidx); + gfree |= xfs_inobt_maskn(0, chunkidx); irbp->ir_startino = gino; irbp->ir_freecount = gcnt; irbp->ir_free = gfree; @@ -535,7 +535,7 @@ xfs_bulkstat( chunkidx < XFS_INODES_PER_CHUNK; chunkidx += nicluster, agbno += nbcluster) { - if (XFS_INOBT_MASKN(chunkidx, + if (xfs_inobt_maskn(chunkidx, nicluster) & ~gfree) xfs_btree_reada_bufs(mp, agno, agbno, nbcluster); diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h index e37eff6761eb..f5e9937f9bdb 100644 --- a/fs/xfs/xfs_mount.h +++ b/fs/xfs/xfs_mount.h @@ -44,9 +44,9 @@ typedef struct xfs_trans_reservations { #ifndef __KERNEL__ -#define XFS_DADDR_TO_AGNO(mp,d) \ +#define xfs_daddr_to_agno(mp,d) \ ((xfs_agnumber_t)(XFS_BB_TO_FSBT(mp, d) / (mp)->m_sb.sb_agblocks)) -#define XFS_DADDR_TO_AGBNO(mp,d) \ +#define xfs_daddr_to_agbno(mp,d) \ ((xfs_agblock_t)(XFS_BB_TO_FSBT(mp, d) % (mp)->m_sb.sb_agblocks)) #else /* __KERNEL__ */ @@ -441,7 +441,6 @@ void xfs_do_force_shutdown(struct xfs_mount *mp, int flags, char *fname, */ #define XFS_MFSI_QUIET 0x40 /* Be silent if mount errors found */ -#define XFS_DADDR_TO_AGNO(mp,d) xfs_daddr_to_agno(mp,d) static inline xfs_agnumber_t xfs_daddr_to_agno(struct xfs_mount *mp, xfs_daddr_t d) { @@ -450,7 +449,6 @@ xfs_daddr_to_agno(struct xfs_mount *mp, xfs_daddr_t d) return (xfs_agnumber_t) ld; } -#define XFS_DADDR_TO_AGBNO(mp,d) xfs_daddr_to_agbno(mp,d) static inline xfs_agblock_t xfs_daddr_to_agbno(struct xfs_mount *mp, xfs_daddr_t d) { diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c index 86471bb40fd4..58f85e9cd11d 100644 --- a/fs/xfs/xfs_rename.c +++ b/fs/xfs/xfs_rename.c @@ -147,7 +147,7 @@ xfs_rename( xfs_sort_for_rename(src_dp, target_dp, src_ip, target_ip, inodes, &num_inodes); - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); tp = xfs_trans_alloc(mp, XFS_TRANS_RENAME); cancel_flags = XFS_TRANS_RELEASE_LOG_RES; spaceres = XFS_RENAME_SPACE_RES(mp, target_name->len); diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c index edf12c7b834c..c5bb86f3ec05 100644 --- a/fs/xfs/xfs_rtalloc.c +++ b/fs/xfs/xfs_rtalloc.c @@ -120,7 +120,7 @@ xfs_growfs_rt_alloc( if ((error = xfs_trans_iget(mp, tp, ino, 0, XFS_ILOCK_EXCL, &ip))) goto error_cancel; - XFS_BMAP_INIT(&flist, &firstblock); + xfs_bmap_init(&flist, &firstblock); /* * Allocate blocks to the bitmap file. */ diff --git a/fs/xfs/xfs_rw.h b/fs/xfs/xfs_rw.h index f87db5344ce6..f76c003ec55d 100644 --- a/fs/xfs/xfs_rw.h +++ b/fs/xfs/xfs_rw.h @@ -28,7 +28,6 @@ struct xfs_mount; * file is a real time file or not, because the bmap code * does. */ -#define XFS_FSB_TO_DB(ip,fsb) xfs_fsb_to_db(ip,fsb) static inline xfs_daddr_t xfs_fsb_to_db(struct xfs_inode *ip, xfs_fsblock_t fsb) { diff --git a/fs/xfs/xfs_sb.h b/fs/xfs/xfs_sb.h index 1ed71916e4c9..1b017c657494 100644 --- a/fs/xfs/xfs_sb.h +++ b/fs/xfs/xfs_sb.h @@ -505,7 +505,7 @@ static inline void xfs_sb_version_removeattr2(xfs_sb_t *sbp) #define XFS_HDR_BLOCK(mp,d) ((xfs_agblock_t)XFS_BB_TO_FSBT(mp,d)) #define XFS_DADDR_TO_FSB(mp,d) XFS_AGB_TO_FSB(mp, \ - XFS_DADDR_TO_AGNO(mp,d), XFS_DADDR_TO_AGBNO(mp,d)) + xfs_daddr_to_agno(mp,d), xfs_daddr_to_agbno(mp,d)) #define XFS_FSB_TO_DADDR(mp,fsbno) XFS_AGB_TO_DADDR(mp, \ XFS_FSB_TO_AGNO(mp,fsbno), XFS_FSB_TO_AGBNO(mp,fsbno)) diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index f07bf8768c3a..0e55c5d7db5f 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -862,7 +862,7 @@ xfs_inactive_symlink_rmt( * Find the block(s) so we can inval and unmap them. */ done = 0; - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); nmaps = ARRAY_SIZE(mval); if ((error = xfs_bmapi(tp, ip, 0, XFS_B_TO_FSB(mp, size), XFS_BMAPI_METADATA, &first_block, 0, mval, &nmaps, @@ -1288,7 +1288,7 @@ xfs_inactive( /* * Free the inode. */ - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); error = xfs_ifree(tp, ip, &free_list); if (error) { /* @@ -1461,7 +1461,7 @@ xfs_create( xfs_ilock(dp, XFS_ILOCK_EXCL | XFS_ILOCK_PARENT); unlock_dp_on_error = B_TRUE; - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); ASSERT(ip == NULL); @@ -1879,7 +1879,7 @@ xfs_remove( } } - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); error = xfs_dir_removename(tp, dp, name, ip->i_ino, &first_block, &free_list, resblks); if (error) { @@ -2059,7 +2059,7 @@ xfs_link( if (error) goto error_return; - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); error = xfs_dir_createname(tp, tdp, target_name, sip->i_ino, &first_block, &free_list, resblks); @@ -2231,7 +2231,7 @@ xfs_mkdir( xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL); unlock_dp_on_error = B_FALSE; - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); error = xfs_dir_createname(tp, dp, dir_name, cdp->i_ino, &first_block, &free_list, resblks ? @@ -2438,7 +2438,7 @@ xfs_symlink( * Initialize the bmap freelist prior to calling either * bmapi or the directory create code. */ - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); /* * Allocate an inode for the symlink. @@ -2860,7 +2860,7 @@ retry: /* * Issue the xfs_bmapi() call to allocate the blocks */ - XFS_BMAP_INIT(&free_list, &firstfsb); + xfs_bmap_init(&free_list, &firstfsb); error = xfs_bmapi(tp, ip, startoffset_fsb, allocatesize_fsb, bmapi_flag, &firstfsb, 0, imapp, &nimaps, @@ -2980,7 +2980,7 @@ xfs_zero_remaining_bytes( XFS_BUF_UNDONE(bp); XFS_BUF_UNWRITE(bp); XFS_BUF_READ(bp); - XFS_BUF_SET_ADDR(bp, XFS_FSB_TO_DB(ip, imap.br_startblock)); + XFS_BUF_SET_ADDR(bp, xfs_fsb_to_db(ip, imap.br_startblock)); xfsbdstrat(mp, bp); error = xfs_iowait(bp); if (error) { @@ -3186,7 +3186,7 @@ xfs_free_file_space( /* * issue the bunmapi() call to free the blocks */ - XFS_BMAP_INIT(&free_list, &firstfsb); + xfs_bmap_init(&free_list, &firstfsb); error = xfs_bunmapi(tp, ip, startoffset_fsb, endoffset_fsb - startoffset_fsb, 0, 2, &firstfsb, &free_list, NULL, &done); -- cgit v1.2.2 From 4503efd0891c40e30928afb4b23dc3f99c62a6b2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 20 Jan 2009 15:51:16 -0800 Subject: sysfs: fix problems with binary files Some sysfs binary files don't like having 0 passed to them as a size. Fix this up at the root by just returning to the vfs if userspace asks us for a zero sized buffer. Thanks to Pavel Roskin for pointing this out. Reported-by: Pavel Roskin Signed-off-by: Greg Kroah-Hartman --- fs/sysfs/bin.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'fs') diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c index 66f6e58a7e4b..f2c478c3424e 100644 --- a/fs/sysfs/bin.c +++ b/fs/sysfs/bin.c @@ -63,6 +63,9 @@ read(struct file *file, char __user *userbuf, size_t bytes, loff_t *off) int count = min_t(size_t, bytes, PAGE_SIZE); char *temp; + if (!bytes) + return 0; + if (size) { if (offs > size) return 0; @@ -131,6 +134,9 @@ static ssize_t write(struct file *file, const char __user *userbuf, int count = min_t(size_t, bytes, PAGE_SIZE); char *temp; + if (!bytes) + return 0; + if (size) { if (offs > size) return 0; -- cgit v1.2.2 From c475146d8f3b97e79f9ef88521e28ad40ac07de6 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 12 Jan 2009 17:44:34 +0100 Subject: ocfs2: Remove ocfs2_dquot_initialize() and ocfs2_dquot_drop() Since ->acquire_dquot and ->release_dquot callbacks aren't called under dqptr_sem anymore, we don't have to start a transaction and obtain locks so early. So we can just remove all this complicated stuff. Signed-off-by: Jan Kara Acked-by: Mark Fasheh --- fs/ocfs2/quota_global.c | 169 +----------------------------------------------- 1 file changed, 2 insertions(+), 167 deletions(-) (limited to 'fs') diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c index 6aff8f2d3e49..f4efa89baee5 100644 --- a/fs/ocfs2/quota_global.c +++ b/fs/ocfs2/quota_global.c @@ -810,171 +810,6 @@ out: return status; } -/* This is difficult. We have to lock quota inode and start transaction - * in this function but we don't want to take the penalty of exlusive - * quota file lock when we are just going to use cached structures. So - * we just take read lock check whether we have dquot cached and if so, - * we don't have to take the write lock... */ -static int ocfs2_dquot_initialize(struct inode *inode, int type) -{ - handle_t *handle = NULL; - int status = 0; - struct super_block *sb = inode->i_sb; - struct ocfs2_mem_dqinfo *oinfo; - int exclusive = 0; - int cnt; - qid_t id; - - mlog_entry_void(); - - for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - if (type != -1 && cnt != type) - continue; - if (!sb_has_quota_active(sb, cnt)) - continue; - oinfo = sb_dqinfo(sb, cnt)->dqi_priv; - status = ocfs2_lock_global_qf(oinfo, 0); - if (status < 0) - goto out; - /* This is just a performance optimization not a reliable test. - * Since we hold an inode lock, noone can actually release - * the structure until we are finished with initialization. */ - if (inode->i_dquot[cnt] != NODQUOT) { - ocfs2_unlock_global_qf(oinfo, 0); - continue; - } - /* When we have inode lock, we know that no dquot_release() can - * run and thus we can safely check whether we need to - * read+modify global file to get quota information or whether - * our node already has it. */ - if (cnt == USRQUOTA) - id = inode->i_uid; - else if (cnt == GRPQUOTA) - id = inode->i_gid; - else - BUG(); - /* Obtain exclusion from quota off... */ - down_write(&sb_dqopt(sb)->dqptr_sem); - exclusive = !dquot_is_cached(sb, id, cnt); - up_write(&sb_dqopt(sb)->dqptr_sem); - if (exclusive) { - status = ocfs2_lock_global_qf(oinfo, 1); - if (status < 0) { - exclusive = 0; - mlog_errno(status); - goto out_ilock; - } - handle = ocfs2_start_trans(OCFS2_SB(sb), - ocfs2_calc_qinit_credits(sb, cnt)); - if (IS_ERR(handle)) { - status = PTR_ERR(handle); - mlog_errno(status); - goto out_ilock; - } - } - dquot_initialize(inode, cnt); - if (exclusive) { - ocfs2_commit_trans(OCFS2_SB(sb), handle); - ocfs2_unlock_global_qf(oinfo, 1); - } - ocfs2_unlock_global_qf(oinfo, 0); - } - mlog_exit(0); - return 0; -out_ilock: - if (exclusive) - ocfs2_unlock_global_qf(oinfo, 1); - ocfs2_unlock_global_qf(oinfo, 0); -out: - mlog_exit(status); - return status; -} - -static int ocfs2_dquot_drop_slow(struct inode *inode) -{ - int status = 0; - int cnt; - int got_lock[MAXQUOTAS] = {0, 0}; - handle_t *handle; - struct super_block *sb = inode->i_sb; - struct ocfs2_mem_dqinfo *oinfo; - - for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - if (!sb_has_quota_active(sb, cnt)) - continue; - oinfo = sb_dqinfo(sb, cnt)->dqi_priv; - status = ocfs2_lock_global_qf(oinfo, 1); - if (status < 0) - goto out; - got_lock[cnt] = 1; - } - handle = ocfs2_start_trans(OCFS2_SB(sb), - ocfs2_calc_qinit_credits(sb, USRQUOTA) + - ocfs2_calc_qinit_credits(sb, GRPQUOTA)); - if (IS_ERR(handle)) { - status = PTR_ERR(handle); - mlog_errno(status); - goto out; - } - dquot_drop(inode); - ocfs2_commit_trans(OCFS2_SB(sb), handle); -out: - for (cnt = 0; cnt < MAXQUOTAS; cnt++) - if (got_lock[cnt]) { - oinfo = sb_dqinfo(sb, cnt)->dqi_priv; - ocfs2_unlock_global_qf(oinfo, 1); - } - return status; -} - -/* See the comment before ocfs2_dquot_initialize. */ -static int ocfs2_dquot_drop(struct inode *inode) -{ - int status = 0; - struct super_block *sb = inode->i_sb; - struct ocfs2_mem_dqinfo *oinfo; - int exclusive = 0; - int cnt; - int got_lock[MAXQUOTAS] = {0, 0}; - - mlog_entry_void(); - for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - if (!sb_has_quota_active(sb, cnt)) - continue; - oinfo = sb_dqinfo(sb, cnt)->dqi_priv; - status = ocfs2_lock_global_qf(oinfo, 0); - if (status < 0) - goto out; - got_lock[cnt] = 1; - } - /* Lock against anyone releasing references so that when when we check - * we know we are not going to be last ones to release dquot */ - down_write(&sb_dqopt(sb)->dqptr_sem); - /* Urgh, this is a terrible hack :( */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - if (inode->i_dquot[cnt] != NODQUOT && - atomic_read(&inode->i_dquot[cnt]->dq_count) > 1) { - exclusive = 1; - break; - } - } - if (!exclusive) - dquot_drop_locked(inode); - up_write(&sb_dqopt(sb)->dqptr_sem); -out: - for (cnt = 0; cnt < MAXQUOTAS; cnt++) - if (got_lock[cnt]) { - oinfo = sb_dqinfo(sb, cnt)->dqi_priv; - ocfs2_unlock_global_qf(oinfo, 0); - } - /* In case we bailed out because we had to do expensive locking - * do it now... */ - if (exclusive) - status = ocfs2_dquot_drop_slow(inode); - mlog_exit(status); - return status; -} - static struct dquot *ocfs2_alloc_dquot(struct super_block *sb, int type) { struct ocfs2_dquot *dquot = @@ -991,8 +826,8 @@ static void ocfs2_destroy_dquot(struct dquot *dquot) } struct dquot_operations ocfs2_quota_operations = { - .initialize = ocfs2_dquot_initialize, - .drop = ocfs2_dquot_drop, + .initialize = dquot_initialize, + .drop = dquot_drop, .alloc_space = dquot_alloc_space, .alloc_inode = dquot_alloc_inode, .free_space = dquot_free_space, -- cgit v1.2.2 From 24179f488092267c9a033d7e25ce7a58af50ff79 Mon Sep 17 00:00:00 2001 From: David Teigland Date: Mon, 19 Jan 2009 13:13:33 -0600 Subject: dlm: fix plock notify callback to lockd We should use the original copy of the file_lock, fl, instead of the copy, flc in the lockd notify callback. The range in flc has been modified by posix_lock_file(), so it will not match a copy of the lock in lockd. Signed-off-by: David Teigland --- fs/dlm/plock.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'fs') diff --git a/fs/dlm/plock.c b/fs/dlm/plock.c index eba87ff3177b..502b1ea5ef6b 100644 --- a/fs/dlm/plock.c +++ b/fs/dlm/plock.c @@ -168,7 +168,7 @@ static int dlm_plock_callback(struct plock_op *op) notify = xop->callback; if (op->info.rv) { - notify(flc, NULL, op->info.rv); + notify(fl, NULL, op->info.rv); goto out; } @@ -187,7 +187,7 @@ static int dlm_plock_callback(struct plock_op *op) (unsigned long long)op->info.number, file, fl); } - rv = notify(flc, NULL, 0); + rv = notify(fl, NULL, 0); if (rv) { /* XXX: We need to cancel the fs lock here: */ log_print("dlm_plock_callback: lock granted after lock request " -- cgit v1.2.2 From 20d5a39929232a715f29e6cb7e3f0d0c790f41eb Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 21 Jan 2009 11:34:50 -0500 Subject: dlm: initialize file_lock struct in GETLK before copying conflicting lock dlm_posix_get fills out the relevant fields in the file_lock before returning when there is a lock conflict, but doesn't clean out any of the other fields in the file_lock. When nfsd does a NFSv4 lockt call, it sets the fl_lmops to nfsd_posix_mng_ops before calling the lower fs. When the lock comes back after testing a lock on GFS2, it still has that field set. This confuses nfsd into thinking that the file_lock is a nfsd4 lock. Fix this by making DLM reinitialize the file_lock before copying the fields from the conflicting lock. Signed-off-by: Jeff Layton Signed-off-by: David Teigland --- fs/dlm/plock.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'fs') diff --git a/fs/dlm/plock.c b/fs/dlm/plock.c index 502b1ea5ef6b..894a32d438d5 100644 --- a/fs/dlm/plock.c +++ b/fs/dlm/plock.c @@ -304,7 +304,9 @@ int dlm_posix_get(dlm_lockspace_t *lockspace, u64 number, struct file *file, if (rv == -ENOENT) rv = 0; else if (rv > 0) { + locks_init_lock(fl); fl->fl_type = (op->info.ex) ? F_WRLCK : F_RDLCK; + fl->fl_flags = FL_POSIX; fl->fl_pid = op->info.pid; fl->fl_start = op->info.start; fl->fl_end = op->info.end; -- cgit v1.2.2 From 74e2d06521913443c7e2697037909f5efc200ec5 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Wed, 21 Jan 2009 15:22:17 +1100 Subject: Long btree pointers are still 64 bit on disk [XFS] Long btree pointers are still 64 bit on disk On 32 bit machines with CONFIG_LBD=n, XFS reduces the in memory size of xfs_fsblock_t to 32 bits so that it will fit within 32 bit addressing. However, the disk format for long btree pointers are still 64 bits in size. The recent btree rewrite failed to take this into account when initialising new btree blocks, setting sibling pointers to NULL and checking if they are NULL. Hence checking whether a 64 bit NULL was the same as a 32 bit NULL was failingi resulting in NULL sibling pointers failing to be detected correctly. This showed up as WANT_CORRUPTED_GOTO shutdowns in xfs_btree_delrec. Fix this by making all the comparisons and setting of long pointer btree NULL blocks to the disk format, not the in memory format. i.e. use NULLDFSBNO. Reported-by: Alexander Beregalov Reported-by: Jacek Luczak Reported-by: Danny ter Haar Tested-by: Jacek Luczak Reviewed-by: Christoph Hellwig Signed-off-by: Dave Chinner Signed-off-by: Felix Blyakher --- fs/xfs/xfs_btree.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'fs') diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c index 4681519ded91..e73c332eb23f 100644 --- a/fs/xfs/xfs_btree.c +++ b/fs/xfs/xfs_btree.c @@ -843,7 +843,7 @@ xfs_btree_ptr_is_null( union xfs_btree_ptr *ptr) { if (cur->bc_flags & XFS_BTREE_LONG_PTRS) - return be64_to_cpu(ptr->l) == NULLFSBLOCK; + return be64_to_cpu(ptr->l) == NULLDFSBNO; else return be32_to_cpu(ptr->s) == NULLAGBLOCK; } @@ -854,7 +854,7 @@ xfs_btree_set_ptr_null( union xfs_btree_ptr *ptr) { if (cur->bc_flags & XFS_BTREE_LONG_PTRS) - ptr->l = cpu_to_be64(NULLFSBLOCK); + ptr->l = cpu_to_be64(NULLDFSBNO); else ptr->s = cpu_to_be32(NULLAGBLOCK); } @@ -918,8 +918,8 @@ xfs_btree_init_block( new->bb_numrecs = cpu_to_be16(numrecs); if (cur->bc_flags & XFS_BTREE_LONG_PTRS) { - new->bb_u.l.bb_leftsib = cpu_to_be64(NULLFSBLOCK); - new->bb_u.l.bb_rightsib = cpu_to_be64(NULLFSBLOCK); + new->bb_u.l.bb_leftsib = cpu_to_be64(NULLDFSBNO); + new->bb_u.l.bb_rightsib = cpu_to_be64(NULLDFSBNO); } else { new->bb_u.s.bb_leftsib = cpu_to_be32(NULLAGBLOCK); new->bb_u.s.bb_rightsib = cpu_to_be32(NULLAGBLOCK); @@ -971,7 +971,7 @@ xfs_btree_ptr_to_daddr( union xfs_btree_ptr *ptr) { if (cur->bc_flags & XFS_BTREE_LONG_PTRS) { - ASSERT(be64_to_cpu(ptr->l) != NULLFSBLOCK); + ASSERT(be64_to_cpu(ptr->l) != NULLDFSBNO); return XFS_FSB_TO_DADDR(cur->bc_mp, be64_to_cpu(ptr->l)); } else { -- cgit v1.2.2 From b16ecfe2f985f77901a36ee5a99c7d3400313341 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:22:31 +0300 Subject: fs/Kconfig: move reiserfs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 86 +---------------------------------------------------- fs/reiserfs/Kconfig | 85 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 86 insertions(+), 85 deletions(-) create mode 100644 fs/reiserfs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index 51307b0fdf0f..03fde694969e 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -27,91 +27,7 @@ config FS_MBCACHE default y if EXT4_FS=y && EXT4_FS_XATTR default m if EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS_XATTR -config REISERFS_FS - tristate "Reiserfs support" - help - Stores not just filenames but the files themselves in a balanced - tree. Uses journalling. - - Balanced trees are more efficient than traditional file system - architectural foundations. - - In general, ReiserFS is as fast as ext2, but is very efficient with - large directories and small files. Additional patches are needed - for NFS and quotas, please see for links. - - It is more easily extended to have features currently found in - database and keyword search systems than block allocation based file - systems are. The next version will be so extended, and will support - plugins consistent with our motto ``It takes more than a license to - make source code open.'' - - Read to learn more about reiserfs. - - Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com. - - If you like it, you can pay us to add new features to it that you - need, buy a support contract, or pay us to port it to another OS. - -config REISERFS_CHECK - bool "Enable reiserfs debug mode" - depends on REISERFS_FS - help - If you set this to Y, then ReiserFS will perform every check it can - possibly imagine of its internal consistency throughout its - operation. It will also go substantially slower. More than once we - have forgotten that this was on, and then gone despondent over the - latest benchmarks.:-) Use of this option allows our team to go all - out in checking for consistency when debugging without fear of its - effect on end users. If you are on the verge of sending in a bug - report, say Y and you might get a useful error message. Almost - everyone should say N. - -config REISERFS_PROC_INFO - bool "Stats in /proc/fs/reiserfs" - depends on REISERFS_FS && PROC_FS - help - Create under /proc/fs/reiserfs a hierarchy of files, displaying - various ReiserFS statistics and internal data at the expense of - making your kernel or module slightly larger (+8 KB). This also - increases the amount of kernel memory required for each mount. - Almost everyone but ReiserFS developers and people fine-tuning - reiserfs or tracing problems should say N. - -config REISERFS_FS_XATTR - bool "ReiserFS extended attributes" - depends on REISERFS_FS - help - Extended attributes are name:value pairs associated with inodes by - the kernel or by users (see the attr(5) manual page, or visit - for details). - - If unsure, say N. - -config REISERFS_FS_POSIX_ACL - bool "ReiserFS POSIX Access Control Lists" - depends on REISERFS_FS_XATTR - select FS_POSIX_ACL - help - Posix Access Control Lists (ACLs) support permissions for users and - groups beyond the owner/group/world scheme. - - To learn more about Access Control Lists, visit the Posix ACLs for - Linux website . - - If you don't know what Access Control Lists are, say N - -config REISERFS_FS_SECURITY - bool "ReiserFS Security Labels" - depends on REISERFS_FS_XATTR - help - Security labels support alternative access control models - implemented by security modules like SELinux. This option - enables an extended attribute handler for file security - labels in the ReiserFS filesystem. - - If you are not using a security module that requires using - extended attributes for file security labels, say N. +source "fs/reiserfs/Kconfig" config JFS_FS tristate "JFS filesystem support" diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig new file mode 100644 index 000000000000..949b8c6addc8 --- /dev/null +++ b/fs/reiserfs/Kconfig @@ -0,0 +1,85 @@ +config REISERFS_FS + tristate "Reiserfs support" + help + Stores not just filenames but the files themselves in a balanced + tree. Uses journalling. + + Balanced trees are more efficient than traditional file system + architectural foundations. + + In general, ReiserFS is as fast as ext2, but is very efficient with + large directories and small files. Additional patches are needed + for NFS and quotas, please see for links. + + It is more easily extended to have features currently found in + database and keyword search systems than block allocation based file + systems are. The next version will be so extended, and will support + plugins consistent with our motto ``It takes more than a license to + make source code open.'' + + Read to learn more about reiserfs. + + Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com. + + If you like it, you can pay us to add new features to it that you + need, buy a support contract, or pay us to port it to another OS. + +config REISERFS_CHECK + bool "Enable reiserfs debug mode" + depends on REISERFS_FS + help + If you set this to Y, then ReiserFS will perform every check it can + possibly imagine of its internal consistency throughout its + operation. It will also go substantially slower. More than once we + have forgotten that this was on, and then gone despondent over the + latest benchmarks.:-) Use of this option allows our team to go all + out in checking for consistency when debugging without fear of its + effect on end users. If you are on the verge of sending in a bug + report, say Y and you might get a useful error message. Almost + everyone should say N. + +config REISERFS_PROC_INFO + bool "Stats in /proc/fs/reiserfs" + depends on REISERFS_FS && PROC_FS + help + Create under /proc/fs/reiserfs a hierarchy of files, displaying + various ReiserFS statistics and internal data at the expense of + making your kernel or module slightly larger (+8 KB). This also + increases the amount of kernel memory required for each mount. + Almost everyone but ReiserFS developers and people fine-tuning + reiserfs or tracing problems should say N. + +config REISERFS_FS_XATTR + bool "ReiserFS extended attributes" + depends on REISERFS_FS + help + Extended attributes are name:value pairs associated with inodes by + the kernel or by users (see the attr(5) manual page, or visit + for details). + + If unsure, say N. + +config REISERFS_FS_POSIX_ACL + bool "ReiserFS POSIX Access Control Lists" + depends on REISERFS_FS_XATTR + select FS_POSIX_ACL + help + Posix Access Control Lists (ACLs) support permissions for users and + groups beyond the owner/group/world scheme. + + To learn more about Access Control Lists, visit the Posix ACLs for + Linux website . + + If you don't know what Access Control Lists are, say N + +config REISERFS_FS_SECURITY + bool "ReiserFS Security Labels" + depends on REISERFS_FS_XATTR + help + Security labels support alternative access control models + implemented by security modules like SELinux. This option + enables an extended attribute handler for file security + labels in the ReiserFS filesystem. + + If you are not using a security module that requires using + extended attributes for file security labels, say N. -- cgit v1.2.2 From f5c77969b33cc5cbb4534289bf23cb1794f9d37c Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:24:27 +0300 Subject: fs/Kconfig: move jfs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 51 +-------------------------------------------------- fs/jfs/Kconfig | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 50 insertions(+), 50 deletions(-) create mode 100644 fs/jfs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index 03fde694969e..b39675cc0fc0 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -28,56 +28,7 @@ config FS_MBCACHE default m if EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS_XATTR source "fs/reiserfs/Kconfig" - -config JFS_FS - tristate "JFS filesystem support" - select NLS - help - This is a port of IBM's Journaled Filesystem . More information is - available in the file . - - If you do not intend to use the JFS filesystem, say N. - -config JFS_POSIX_ACL - bool "JFS POSIX Access Control Lists" - depends on JFS_FS - select FS_POSIX_ACL - help - Posix Access Control Lists (ACLs) support permissions for users and - groups beyond the owner/group/world scheme. - - To learn more about Access Control Lists, visit the Posix ACLs for - Linux website . - - If you don't know what Access Control Lists are, say N - -config JFS_SECURITY - bool "JFS Security Labels" - depends on JFS_FS - help - Security labels support alternative access control models - implemented by security modules like SELinux. This option - enables an extended attribute handler for file security - labels in the jfs filesystem. - - If you are not using a security module that requires using - extended attributes for file security labels, say N. - -config JFS_DEBUG - bool "JFS debugging" - depends on JFS_FS - help - If you are experiencing any problems with the JFS filesystem, say - Y here. This will result in additional debugging messages to be - written to the system log. Under normal circumstances, this - results in very little overhead. - -config JFS_STATISTICS - bool "JFS statistics" - depends on JFS_FS - help - Enabling this option will cause statistics from the JFS file system - to be made available to the user in the /proc/fs/jfs/ directory. +source "fs/jfs/Kconfig" config FS_POSIX_ACL # Posix ACL utility routines (for now, only ext2/ext3/jfs/reiserfs/nfs4) diff --git a/fs/jfs/Kconfig b/fs/jfs/Kconfig new file mode 100644 index 000000000000..9ff619a6f9cc --- /dev/null +++ b/fs/jfs/Kconfig @@ -0,0 +1,49 @@ +config JFS_FS + tristate "JFS filesystem support" + select NLS + help + This is a port of IBM's Journaled Filesystem . More information is + available in the file . + + If you do not intend to use the JFS filesystem, say N. + +config JFS_POSIX_ACL + bool "JFS POSIX Access Control Lists" + depends on JFS_FS + select FS_POSIX_ACL + help + Posix Access Control Lists (ACLs) support permissions for users and + groups beyond the owner/group/world scheme. + + To learn more about Access Control Lists, visit the Posix ACLs for + Linux website . + + If you don't know what Access Control Lists are, say N + +config JFS_SECURITY + bool "JFS Security Labels" + depends on JFS_FS + help + Security labels support alternative access control models + implemented by security modules like SELinux. This option + enables an extended attribute handler for file security + labels in the jfs filesystem. + + If you are not using a security module that requires using + extended attributes for file security labels, say N. + +config JFS_DEBUG + bool "JFS debugging" + depends on JFS_FS + help + If you are experiencing any problems with the JFS filesystem, say + Y here. This will result in additional debugging messages to be + written to the system log. Under normal circumstances, this + results in very little overhead. + +config JFS_STATISTICS + bool "JFS statistics" + depends on JFS_FS + help + Enabling this option will cause statistics from the JFS file system + to be made available to the user in the /proc/fs/jfs/ directory. -- cgit v1.2.2 From 2fe4371dff3f1a5a1f7d91f1b090076954f4d17e Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:26:11 +0300 Subject: fs/Kconfig: move ocfs2 out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 87 +------------------------------------------------------- fs/ocfs2/Kconfig | 85 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 86 insertions(+), 86 deletions(-) create mode 100644 fs/ocfs2/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index b39675cc0fc0..9fbc43f973d4 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -49,92 +49,7 @@ config FILE_LOCKING source "fs/xfs/Kconfig" source "fs/gfs2/Kconfig" - -config OCFS2_FS - tristate "OCFS2 file system support" - depends on NET && SYSFS - select CONFIGFS_FS - select JBD2 - select CRC32 - select QUOTA - select QUOTA_TREE - help - OCFS2 is a general purpose extent based shared disk cluster file - system with many similarities to ext3. It supports 64 bit inode - numbers, and has automatically extending metadata groups which may - also make it attractive for non-clustered use. - - You'll want to install the ocfs2-tools package in order to at least - get "mount.ocfs2". - - Project web page: http://oss.oracle.com/projects/ocfs2 - Tools web page: http://oss.oracle.com/projects/ocfs2-tools - OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/ - - For more information on OCFS2, see the file - . - -config OCFS2_FS_O2CB - tristate "O2CB Kernelspace Clustering" - depends on OCFS2_FS - default y - help - OCFS2 includes a simple kernelspace clustering package, the OCFS2 - Cluster Base. It only requires a very small userspace component - to configure it. This comes with the standard ocfs2-tools package. - O2CB is limited to maintaining a cluster for OCFS2 file systems. - It cannot manage any other cluster applications. - - It is always safe to say Y here, as the clustering method is - run-time selectable. - -config OCFS2_FS_USERSPACE_CLUSTER - tristate "OCFS2 Userspace Clustering" - depends on OCFS2_FS && DLM - default y - help - This option will allow OCFS2 to use userspace clustering services - in conjunction with the DLM in fs/dlm. If you are using a - userspace cluster manager, say Y here. - - It is safe to say Y, as the clustering method is run-time - selectable. - -config OCFS2_FS_STATS - bool "OCFS2 statistics" - depends on OCFS2_FS - default y - help - This option allows some fs statistics to be captured. Enabling - this option may increase the memory consumption. - -config OCFS2_DEBUG_MASKLOG - bool "OCFS2 logging support" - depends on OCFS2_FS - default y - help - The ocfs2 filesystem has an extensive logging system. The system - allows selection of events to log via files in /sys/o2cb/logmask/. - This option will enlarge your kernel, but it allows debugging of - ocfs2 filesystem issues. - -config OCFS2_DEBUG_FS - bool "OCFS2 expensive checks" - depends on OCFS2_FS - default n - help - This option will enable expensive consistency checks. Enable - this option for debugging only as it is likely to decrease - performance of the filesystem. - -config OCFS2_FS_POSIX_ACL - bool "OCFS2 POSIX Access Control Lists" - depends on OCFS2_FS - select FS_POSIX_ACL - default n - help - Posix Access Control Lists (ACLs) support permissions for users and - groups beyond the owner/group/world scheme. +source "fs/ocfs2/Kconfig" config BTRFS_FS tristate "Btrfs filesystem (EXPERIMENTAL) Unstable disk format" diff --git a/fs/ocfs2/Kconfig b/fs/ocfs2/Kconfig new file mode 100644 index 000000000000..701b7a3a872e --- /dev/null +++ b/fs/ocfs2/Kconfig @@ -0,0 +1,85 @@ +config OCFS2_FS + tristate "OCFS2 file system support" + depends on NET && SYSFS + select CONFIGFS_FS + select JBD2 + select CRC32 + select QUOTA + select QUOTA_TREE + help + OCFS2 is a general purpose extent based shared disk cluster file + system with many similarities to ext3. It supports 64 bit inode + numbers, and has automatically extending metadata groups which may + also make it attractive for non-clustered use. + + You'll want to install the ocfs2-tools package in order to at least + get "mount.ocfs2". + + Project web page: http://oss.oracle.com/projects/ocfs2 + Tools web page: http://oss.oracle.com/projects/ocfs2-tools + OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/ + + For more information on OCFS2, see the file + . + +config OCFS2_FS_O2CB + tristate "O2CB Kernelspace Clustering" + depends on OCFS2_FS + default y + help + OCFS2 includes a simple kernelspace clustering package, the OCFS2 + Cluster Base. It only requires a very small userspace component + to configure it. This comes with the standard ocfs2-tools package. + O2CB is limited to maintaining a cluster for OCFS2 file systems. + It cannot manage any other cluster applications. + + It is always safe to say Y here, as the clustering method is + run-time selectable. + +config OCFS2_FS_USERSPACE_CLUSTER + tristate "OCFS2 Userspace Clustering" + depends on OCFS2_FS && DLM + default y + help + This option will allow OCFS2 to use userspace clustering services + in conjunction with the DLM in fs/dlm. If you are using a + userspace cluster manager, say Y here. + + It is safe to say Y, as the clustering method is run-time + selectable. + +config OCFS2_FS_STATS + bool "OCFS2 statistics" + depends on OCFS2_FS + default y + help + This option allows some fs statistics to be captured. Enabling + this option may increase the memory consumption. + +config OCFS2_DEBUG_MASKLOG + bool "OCFS2 logging support" + depends on OCFS2_FS + default y + help + The ocfs2 filesystem has an extensive logging system. The system + allows selection of events to log via files in /sys/o2cb/logmask/. + This option will enlarge your kernel, but it allows debugging of + ocfs2 filesystem issues. + +config OCFS2_DEBUG_FS + bool "OCFS2 expensive checks" + depends on OCFS2_FS + default n + help + This option will enable expensive consistency checks. Enable + this option for debugging only as it is likely to decrease + performance of the filesystem. + +config OCFS2_FS_POSIX_ACL + bool "OCFS2 POSIX Access Control Lists" + depends on OCFS2_FS + select FS_POSIX_ACL + default n + help + Posix Access Control Lists (ACLs) support permissions for users and + groups beyond the owner/group/world scheme. -- cgit v1.2.2 From 335debee07f2d4187a6073d7764ed56bb2ae52f4 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:27:30 +0300 Subject: fs/Kconfig: move btrfs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 20 +------------------- fs/btrfs/Kconfig | 18 ++++++++++++++++++ 2 files changed, 19 insertions(+), 19 deletions(-) create mode 100644 fs/btrfs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index 9fbc43f973d4..51f2aba92c22 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -50,25 +50,7 @@ config FILE_LOCKING source "fs/xfs/Kconfig" source "fs/gfs2/Kconfig" source "fs/ocfs2/Kconfig" - -config BTRFS_FS - tristate "Btrfs filesystem (EXPERIMENTAL) Unstable disk format" - depends on EXPERIMENTAL - select LIBCRC32C - select ZLIB_INFLATE - select ZLIB_DEFLATE - help - Btrfs is a new filesystem with extents, writable snapshotting, - support for multiple devices and many more features. - - Btrfs is highly experimental, and THE DISK FORMAT IS NOT YET - FINALIZED. You should say N here unless you are interested in - testing Btrfs with non-critical data. - - To compile this file system support as a module, choose M here. The - module will be called btrfs. - - If unsure, say N. +source "fs/btrfs/Kconfig" endif # BLOCK diff --git a/fs/btrfs/Kconfig b/fs/btrfs/Kconfig new file mode 100644 index 000000000000..f8fcf999ea1b --- /dev/null +++ b/fs/btrfs/Kconfig @@ -0,0 +1,18 @@ +config BTRFS_FS + tristate "Btrfs filesystem (EXPERIMENTAL) Unstable disk format" + depends on EXPERIMENTAL + select LIBCRC32C + select ZLIB_INFLATE + select ZLIB_DEFLATE + help + Btrfs is a new filesystem with extents, writable snapshotting, + support for multiple devices and many more features. + + Btrfs is highly experimental, and THE DISK FORMAT IS NOT YET + FINALIZED. You should say N here unless you are interested in + testing Btrfs with non-critical data. + + To compile this file system support as a module, choose M here. The + module will be called btrfs. + + If unsure, say N. -- cgit v1.2.2 From 90ffd467933eaf581e11fec51e7ba16fc9bd542d Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:31:56 +0300 Subject: fs/Kconfig: move autofs, autofs4 out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 44 ++------------------------------------------ fs/autofs/Kconfig | 21 +++++++++++++++++++++ fs/autofs4/Kconfig | 20 ++++++++++++++++++++ 3 files changed, 43 insertions(+), 42 deletions(-) create mode 100644 fs/autofs/Kconfig create mode 100644 fs/autofs4/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index 51f2aba92c22..70527fe6b630 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -112,48 +112,8 @@ config QUOTACTL depends on XFS_QUOTA || QUOTA default y -config AUTOFS_FS - tristate "Kernel automounter support" - help - The automounter is a tool to automatically mount remote file systems - on demand. This implementation is partially kernel-based to reduce - overhead in the already-mounted case; this is unlike the BSD - automounter (amd), which is a pure user space daemon. - - To use the automounter you need the user-space tools from the autofs - package; you can find the location in . - You also want to answer Y to "NFS file system support", below. - - If you want to use the newer version of the automounter with more - features, say N here and say Y to "Kernel automounter v4 support", - below. - - To compile this support as a module, choose M here: the module will be - called autofs. - - If you are not a part of a fairly large, distributed network, you - probably do not need an automounter, and can say N here. - -config AUTOFS4_FS - tristate "Kernel automounter version 4 support (also supports v3)" - help - The automounter is a tool to automatically mount remote file systems - on demand. This implementation is partially kernel-based to reduce - overhead in the already-mounted case; this is unlike the BSD - automounter (amd), which is a pure user space daemon. - - To use the automounter you need the user-space tools from - ; you also - want to answer Y to "NFS file system support", below. - - To compile this support as a module, choose M here: the module will be - called autofs4. You will need to add "alias autofs autofs4" to your - modules configuration file. - - If you are not a part of a fairly large, distributed network or - don't have a laptop which needs to dynamically reconfigure to the - local network, you probably do not need an automounter, and can say - N here. +source "fs/autofs/Kconfig" +source "fs/autofs4/Kconfig" config FUSE_FS tristate "FUSE (Filesystem in Userspace) support" diff --git a/fs/autofs/Kconfig b/fs/autofs/Kconfig new file mode 100644 index 000000000000..5f3bea90911e --- /dev/null +++ b/fs/autofs/Kconfig @@ -0,0 +1,21 @@ +config AUTOFS_FS + tristate "Kernel automounter support" + help + The automounter is a tool to automatically mount remote file systems + on demand. This implementation is partially kernel-based to reduce + overhead in the already-mounted case; this is unlike the BSD + automounter (amd), which is a pure user space daemon. + + To use the automounter you need the user-space tools from the autofs + package; you can find the location in . + You also want to answer Y to "NFS file system support", below. + + If you want to use the newer version of the automounter with more + features, say N here and say Y to "Kernel automounter v4 support", + below. + + To compile this support as a module, choose M here: the module will be + called autofs. + + If you are not a part of a fairly large, distributed network, you + probably do not need an automounter, and can say N here. diff --git a/fs/autofs4/Kconfig b/fs/autofs4/Kconfig new file mode 100644 index 000000000000..1204d6384d39 --- /dev/null +++ b/fs/autofs4/Kconfig @@ -0,0 +1,20 @@ +config AUTOFS4_FS + tristate "Kernel automounter version 4 support (also supports v3)" + help + The automounter is a tool to automatically mount remote file systems + on demand. This implementation is partially kernel-based to reduce + overhead in the already-mounted case; this is unlike the BSD + automounter (amd), which is a pure user space daemon. + + To use the automounter you need the user-space tools from + ; you also + want to answer Y to "NFS file system support", below. + + To compile this support as a module, choose M here: the module will be + called autofs4. You will need to add "alias autofs autofs4" to your + modules configuration file. + + If you are not a part of a fairly large, distributed network or + don't have a laptop which needs to dynamically reconfigure to the + local network, you probably do not need an automounter, and can say + N here. -- cgit v1.2.2 From 3ef7784e47975e31148c25b6fa795949fdc16d9c Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:33:25 +0300 Subject: fs/Kconfig: move fuse out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 17 +---------------- fs/fuse/Kconfig | 15 +++++++++++++++ 2 files changed, 16 insertions(+), 16 deletions(-) create mode 100644 fs/fuse/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index 70527fe6b630..8b36059d2b0c 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -114,22 +114,7 @@ config QUOTACTL source "fs/autofs/Kconfig" source "fs/autofs4/Kconfig" - -config FUSE_FS - tristate "FUSE (Filesystem in Userspace) support" - help - With FUSE it is possible to implement a fully functional filesystem - in a userspace program. - - There's also companion library: libfuse. This library along with - utilities is available from the FUSE homepage: - - - See for more information. - See for needed library/utility version. - - If you want to develop a userspace FS, or if you want to use - a filesystem based on FUSE, answer Y or M. +source "fs/fuse/Kconfig" config GENERIC_ACL bool diff --git a/fs/fuse/Kconfig b/fs/fuse/Kconfig new file mode 100644 index 000000000000..0cf160a94eda --- /dev/null +++ b/fs/fuse/Kconfig @@ -0,0 +1,15 @@ +config FUSE_FS + tristate "FUSE (Filesystem in Userspace) support" + help + With FUSE it is possible to implement a fully functional filesystem + in a userspace program. + + There's also companion library: libfuse. This library along with + utilities is available from the FUSE homepage: + + + See for more information. + See for needed library/utility version. + + If you want to develop a userspace FS, or if you want to use + a filesystem based on FUSE, answer Y or M. -- cgit v1.2.2 From ddfaccd995b2d1bb1df4461ee9403ba9fdcbee04 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:35:21 +0300 Subject: fs/Kconfig: move iso9660, udf out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 60 ++------------------------------------------------------ fs/isofs/Kconfig | 39 ++++++++++++++++++++++++++++++++++++ fs/udf/Kconfig | 18 +++++++++++++++++ 3 files changed, 59 insertions(+), 58 deletions(-) create mode 100644 fs/isofs/Kconfig create mode 100644 fs/udf/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index 8b36059d2b0c..b4868b8fd999 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -123,64 +123,8 @@ config GENERIC_ACL if BLOCK menu "CD-ROM/DVD Filesystems" -config ISO9660_FS - tristate "ISO 9660 CDROM file system support" - help - This is the standard file system used on CD-ROMs. It was previously - known as "High Sierra File System" and is called "hsfs" on other - Unix systems. The so-called Rock-Ridge extensions which allow for - long Unix filenames and symbolic links are also supported by this - driver. If you have a CD-ROM drive and want to do more with it than - just listen to audio CDs and watch its LEDs, say Y (and read - and the CD-ROM-HOWTO, - available from ), thereby - enlarging your kernel by about 27 KB; otherwise say N. - - To compile this file system support as a module, choose M here: the - module will be called isofs. - -config JOLIET - bool "Microsoft Joliet CDROM extensions" - depends on ISO9660_FS - select NLS - help - Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system - which allows for long filenames in unicode format (unicode is the - new 16 bit character code, successor to ASCII, which encodes the - characters of almost all languages of the world; see - for more information). Say Y here if you - want to be able to read Joliet CD-ROMs under Linux. - -config ZISOFS - bool "Transparent decompression extension" - depends on ISO9660_FS - select ZLIB_INFLATE - help - This is a Linux-specific extension to RockRidge which lets you store - data in compressed form on a CD-ROM and have it transparently - decompressed when the CD-ROM is accessed. See - for the tools - necessary to create such a filesystem. Say Y here if you want to be - able to read such compressed CD-ROMs. - -config UDF_FS - tristate "UDF file system support" - select CRC_ITU_T - help - This is the new file system used on some CD-ROMs and DVDs. Say Y if - you intend to mount DVD discs or CDRW's written in packet mode, or - if written to by other UDF utilities, such as DirectCD. - Please read . - - To compile this file system support as a module, choose M here: the - module will be called udf. - - If unsure, say N. - -config UDF_NLS - bool - default y - depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y) +source "fs/isofs/Kconfig" +source "fs/udf/Kconfig" endmenu endif # BLOCK diff --git a/fs/isofs/Kconfig b/fs/isofs/Kconfig new file mode 100644 index 000000000000..8ab9878e3671 --- /dev/null +++ b/fs/isofs/Kconfig @@ -0,0 +1,39 @@ +config ISO9660_FS + tristate "ISO 9660 CDROM file system support" + help + This is the standard file system used on CD-ROMs. It was previously + known as "High Sierra File System" and is called "hsfs" on other + Unix systems. The so-called Rock-Ridge extensions which allow for + long Unix filenames and symbolic links are also supported by this + driver. If you have a CD-ROM drive and want to do more with it than + just listen to audio CDs and watch its LEDs, say Y (and read + and the CD-ROM-HOWTO, + available from ), thereby + enlarging your kernel by about 27 KB; otherwise say N. + + To compile this file system support as a module, choose M here: the + module will be called isofs. + +config JOLIET + bool "Microsoft Joliet CDROM extensions" + depends on ISO9660_FS + select NLS + help + Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system + which allows for long filenames in unicode format (unicode is the + new 16 bit character code, successor to ASCII, which encodes the + characters of almost all languages of the world; see + for more information). Say Y here if you + want to be able to read Joliet CD-ROMs under Linux. + +config ZISOFS + bool "Transparent decompression extension" + depends on ISO9660_FS + select ZLIB_INFLATE + help + This is a Linux-specific extension to RockRidge which lets you store + data in compressed form on a CD-ROM and have it transparently + decompressed when the CD-ROM is accessed. See + for the tools + necessary to create such a filesystem. Say Y here if you want to be + able to read such compressed CD-ROMs. diff --git a/fs/udf/Kconfig b/fs/udf/Kconfig new file mode 100644 index 000000000000..0e0e99bd6bce --- /dev/null +++ b/fs/udf/Kconfig @@ -0,0 +1,18 @@ +config UDF_FS + tristate "UDF file system support" + select CRC_ITU_T + help + This is the new file system used on some CD-ROMs and DVDs. Say Y if + you intend to mount DVD discs or CDRW's written in packet mode, or + if written to by other UDF utilities, such as DirectCD. + Please read . + + To compile this file system support as a module, choose M here: the + module will be called udf. + + If unsure, say N. + +config UDF_NLS + bool + default y + depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y) -- cgit v1.2.2 From 1c6ace019bce5e918a3d6cd53948652e14850644 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:37:59 +0300 Subject: fs/Kconfig: move fat out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 98 +--------------------------------------------------------- fs/fat/Kconfig | 97 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 98 insertions(+), 97 deletions(-) create mode 100644 fs/fat/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index b4868b8fd999..fdb2c351b4a7 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -132,103 +132,7 @@ endif # BLOCK if BLOCK menu "DOS/FAT/NT Filesystems" -config FAT_FS - tristate - select NLS - help - If you want to use one of the FAT-based file systems (the MS-DOS and - VFAT (Windows 95) file systems), then you must say Y or M here - to include FAT support. You will then be able to mount partitions or - diskettes with FAT-based file systems and transparently access the - files on them, i.e. MSDOS files will look and behave just like all - other Unix files. - - This FAT support is not a file system in itself, it only provides - the foundation for the other file systems. You will have to say Y or - M to at least one of "MSDOS fs support" or "VFAT fs support" in - order to make use of it. - - Another way to read and write MSDOS floppies and hard drive - partitions from within Linux (but not transparently) is with the - mtools ("man mtools") program suite. You don't need to say Y here in - order to do that. - - If you need to move large files on floppies between a DOS and a - Linux box, say Y here, mount the floppy under Linux with an MSDOS - file system and use GNU tar's M option. GNU tar is a program - available for Unix and DOS ("man tar" or "info tar"). - - The FAT support will enlarge your kernel by about 37 KB. If unsure, - say Y. - - To compile this as a module, choose M here: the module will be called - fat. Note that if you compile the FAT support as a module, you - cannot compile any of the FAT-based file systems into the kernel - -- they will have to be modules as well. - -config MSDOS_FS - tristate "MSDOS fs support" - select FAT_FS - help - This allows you to mount MSDOS partitions of your hard drive (unless - they are compressed; to access compressed MSDOS partitions under - Linux, you can either use the DOS emulator DOSEMU, described in the - DOSEMU-HOWTO, available from - , or try dmsdosfs in - . If you - intend to use dosemu with a non-compressed MSDOS partition, say Y - here) and MSDOS floppies. This means that file access becomes - transparent, i.e. the MSDOS files look and behave just like all - other Unix files. - - If you have Windows 95 or Windows NT installed on your MSDOS - partitions, you should use the VFAT file system (say Y to "VFAT fs - support" below), or you will not be able to see the long filenames - generated by Windows 95 / Windows NT. - - This option will enlarge your kernel by about 7 KB. If unsure, - answer Y. This will only work if you said Y to "DOS FAT fs support" - as well. To compile this as a module, choose M here: the module will - be called msdos. - -config VFAT_FS - tristate "VFAT (Windows-95) fs support" - select FAT_FS - help - This option provides support for normal Windows file systems with - long filenames. That includes non-compressed FAT-based file systems - used by Windows 95, Windows 98, Windows NT 4.0, and the Unix - programs from the mtools package. - - The VFAT support enlarges your kernel by about 10 KB and it only - works if you said Y to the "DOS FAT fs support" above. Please read - the file for details. If - unsure, say Y. - - To compile this as a module, choose M here: the module will be called - vfat. - -config FAT_DEFAULT_CODEPAGE - int "Default codepage for FAT" - depends on MSDOS_FS || VFAT_FS - default 437 - help - This option should be set to the codepage of your FAT filesystems. - It can be overridden with the "codepage" mount option. - See for more information. - -config FAT_DEFAULT_IOCHARSET - string "Default iocharset for FAT" - depends on VFAT_FS - default "iso8859-1" - help - Set this to the default input/output character set you'd - like FAT to use. It should probably match the character set - that most of your FAT filesystems use, and can be overridden - with the "iocharset" mount option for FAT filesystems. - Note that "utf8" is not recommended for FAT filesystems. - If unsure, you shouldn't set "utf8" here. - See for more information. +source "fs/fat/Kconfig" config NTFS_FS tristate "NTFS file system support" diff --git a/fs/fat/Kconfig b/fs/fat/Kconfig new file mode 100644 index 000000000000..d0a69ff25375 --- /dev/null +++ b/fs/fat/Kconfig @@ -0,0 +1,97 @@ +config FAT_FS + tristate + select NLS + help + If you want to use one of the FAT-based file systems (the MS-DOS and + VFAT (Windows 95) file systems), then you must say Y or M here + to include FAT support. You will then be able to mount partitions or + diskettes with FAT-based file systems and transparently access the + files on them, i.e. MSDOS files will look and behave just like all + other Unix files. + + This FAT support is not a file system in itself, it only provides + the foundation for the other file systems. You will have to say Y or + M to at least one of "MSDOS fs support" or "VFAT fs support" in + order to make use of it. + + Another way to read and write MSDOS floppies and hard drive + partitions from within Linux (but not transparently) is with the + mtools ("man mtools") program suite. You don't need to say Y here in + order to do that. + + If you need to move large files on floppies between a DOS and a + Linux box, say Y here, mount the floppy under Linux with an MSDOS + file system and use GNU tar's M option. GNU tar is a program + available for Unix and DOS ("man tar" or "info tar"). + + The FAT support will enlarge your kernel by about 37 KB. If unsure, + say Y. + + To compile this as a module, choose M here: the module will be called + fat. Note that if you compile the FAT support as a module, you + cannot compile any of the FAT-based file systems into the kernel + -- they will have to be modules as well. + +config MSDOS_FS + tristate "MSDOS fs support" + select FAT_FS + help + This allows you to mount MSDOS partitions of your hard drive (unless + they are compressed; to access compressed MSDOS partitions under + Linux, you can either use the DOS emulator DOSEMU, described in the + DOSEMU-HOWTO, available from + , or try dmsdosfs in + . If you + intend to use dosemu with a non-compressed MSDOS partition, say Y + here) and MSDOS floppies. This means that file access becomes + transparent, i.e. the MSDOS files look and behave just like all + other Unix files. + + If you have Windows 95 or Windows NT installed on your MSDOS + partitions, you should use the VFAT file system (say Y to "VFAT fs + support" below), or you will not be able to see the long filenames + generated by Windows 95 / Windows NT. + + This option will enlarge your kernel by about 7 KB. If unsure, + answer Y. This will only work if you said Y to "DOS FAT fs support" + as well. To compile this as a module, choose M here: the module will + be called msdos. + +config VFAT_FS + tristate "VFAT (Windows-95) fs support" + select FAT_FS + help + This option provides support for normal Windows file systems with + long filenames. That includes non-compressed FAT-based file systems + used by Windows 95, Windows 98, Windows NT 4.0, and the Unix + programs from the mtools package. + + The VFAT support enlarges your kernel by about 10 KB and it only + works if you said Y to the "DOS FAT fs support" above. Please read + the file for details. If + unsure, say Y. + + To compile this as a module, choose M here: the module will be called + vfat. + +config FAT_DEFAULT_CODEPAGE + int "Default codepage for FAT" + depends on MSDOS_FS || VFAT_FS + default 437 + help + This option should be set to the codepage of your FAT filesystems. + It can be overridden with the "codepage" mount option. + See for more information. + +config FAT_DEFAULT_IOCHARSET + string "Default iocharset for FAT" + depends on VFAT_FS + default "iso8859-1" + help + Set this to the default input/output character set you'd + like FAT to use. It should probably match the character set + that most of your FAT filesystems use, and can be overridden + with the "iocharset" mount option for FAT filesystems. + Note that "utf8" is not recommended for FAT filesystems. + If unsure, you shouldn't set "utf8" here. + See for more information. -- cgit v1.2.2 From 9d73ac9e8faffa3b930fcebbf4ebcd25f8061ada Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:39:20 +0300 Subject: fs/Kconfig: move ntfs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 80 +-------------------------------------------------------- fs/ntfs/Kconfig | 78 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 79 insertions(+), 79 deletions(-) create mode 100644 fs/ntfs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index fdb2c351b4a7..f746fd6cb728 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -133,85 +133,7 @@ if BLOCK menu "DOS/FAT/NT Filesystems" source "fs/fat/Kconfig" - -config NTFS_FS - tristate "NTFS file system support" - select NLS - help - NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003. - - Saying Y or M here enables read support. There is partial, but - safe, write support available. For write support you must also - say Y to "NTFS write support" below. - - There are also a number of user-space tools available, called - ntfsprogs. These include ntfsundelete and ntfsresize, that work - without NTFS support enabled in the kernel. - - This is a rewrite from scratch of Linux NTFS support and replaced - the old NTFS code starting with Linux 2.5.11. A backport to - the Linux 2.4 kernel series is separately available as a patch - from the project web site. - - For more information see - and . - - To compile this file system support as a module, choose M here: the - module will be called ntfs. - - If you are not using Windows NT, 2000, XP or 2003 in addition to - Linux on your computer it is safe to say N. - -config NTFS_DEBUG - bool "NTFS debugging support" - depends on NTFS_FS - help - If you are experiencing any problems with the NTFS file system, say - Y here. This will result in additional consistency checks to be - performed by the driver as well as additional debugging messages to - be written to the system log. Note that debugging messages are - disabled by default. To enable them, supply the option debug_msgs=1 - at the kernel command line when booting the kernel or as an option - to insmod when loading the ntfs module. Once the driver is active, - you can enable debugging messages by doing (as root): - echo 1 > /proc/sys/fs/ntfs-debug - Replacing the "1" with "0" would disable debug messages. - - If you leave debugging messages disabled, this results in little - overhead, but enabling debug messages results in very significant - slowdown of the system. - - When reporting bugs, please try to have available a full dump of - debugging messages while the misbehaviour was occurring. - -config NTFS_RW - bool "NTFS write support" - depends on NTFS_FS - help - This enables the partial, but safe, write support in the NTFS driver. - - The only supported operation is overwriting existing files, without - changing the file length. No file or directory creation, deletion or - renaming is possible. Note only non-resident files can be written to - so you may find that some very small files (<500 bytes or so) cannot - be written to. - - While we cannot guarantee that it will not damage any data, we have - so far not received a single report where the driver would have - damaged someones data so we assume it is perfectly safe to use. - - Note: While write support is safe in this version (a rewrite from - scratch of the NTFS support), it should be noted that the old NTFS - write support, included in Linux 2.5.10 and before (since 1997), - is not safe. - - This is currently useful with TopologiLinux. TopologiLinux is run - on top of any DOS/Microsoft Windows system without partitioning your - hard disk. Unlike other Linux distributions TopologiLinux does not - need its own partition. For more information see - - - It is perfectly safe to say N here. +source "fs/ntfs/Kconfig" endmenu endif # BLOCK diff --git a/fs/ntfs/Kconfig b/fs/ntfs/Kconfig new file mode 100644 index 000000000000..f5a868cc9152 --- /dev/null +++ b/fs/ntfs/Kconfig @@ -0,0 +1,78 @@ +config NTFS_FS + tristate "NTFS file system support" + select NLS + help + NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003. + + Saying Y or M here enables read support. There is partial, but + safe, write support available. For write support you must also + say Y to "NTFS write support" below. + + There are also a number of user-space tools available, called + ntfsprogs. These include ntfsundelete and ntfsresize, that work + without NTFS support enabled in the kernel. + + This is a rewrite from scratch of Linux NTFS support and replaced + the old NTFS code starting with Linux 2.5.11. A backport to + the Linux 2.4 kernel series is separately available as a patch + from the project web site. + + For more information see + and . + + To compile this file system support as a module, choose M here: the + module will be called ntfs. + + If you are not using Windows NT, 2000, XP or 2003 in addition to + Linux on your computer it is safe to say N. + +config NTFS_DEBUG + bool "NTFS debugging support" + depends on NTFS_FS + help + If you are experiencing any problems with the NTFS file system, say + Y here. This will result in additional consistency checks to be + performed by the driver as well as additional debugging messages to + be written to the system log. Note that debugging messages are + disabled by default. To enable them, supply the option debug_msgs=1 + at the kernel command line when booting the kernel or as an option + to insmod when loading the ntfs module. Once the driver is active, + you can enable debugging messages by doing (as root): + echo 1 > /proc/sys/fs/ntfs-debug + Replacing the "1" with "0" would disable debug messages. + + If you leave debugging messages disabled, this results in little + overhead, but enabling debug messages results in very significant + slowdown of the system. + + When reporting bugs, please try to have available a full dump of + debugging messages while the misbehaviour was occurring. + +config NTFS_RW + bool "NTFS write support" + depends on NTFS_FS + help + This enables the partial, but safe, write support in the NTFS driver. + + The only supported operation is overwriting existing files, without + changing the file length. No file or directory creation, deletion or + renaming is possible. Note only non-resident files can be written to + so you may find that some very small files (<500 bytes or so) cannot + be written to. + + While we cannot guarantee that it will not damage any data, we have + so far not received a single report where the driver would have + damaged someones data so we assume it is perfectly safe to use. + + Note: While write support is safe in this version (a rewrite from + scratch of the NTFS support), it should be noted that the old NTFS + write support, included in Linux 2.5.10 and before (since 1997), + is not safe. + + This is currently useful with TopologiLinux. TopologiLinux is run + on top of any DOS/Microsoft Windows system without partitioning your + hard disk. Unlike other Linux distributions TopologiLinux does not + need its own partition. For more information see + + + It is perfectly safe to say N here. -- cgit v1.2.2 From 5f3a211a8b02222498f134ea961fe29c97a4801f Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:40:58 +0300 Subject: fs/Kconfig: move sysfs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 25 +------------------------ fs/sysfs/Kconfig | 23 +++++++++++++++++++++++ 2 files changed, 24 insertions(+), 24 deletions(-) create mode 100644 fs/sysfs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index f746fd6cb728..e9103b9862b4 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -141,30 +141,7 @@ endif # BLOCK menu "Pseudo filesystems" source "fs/proc/Kconfig" - -config SYSFS - bool "sysfs file system support" if EMBEDDED - default y - help - The sysfs filesystem is a virtual filesystem that the kernel uses to - export internal kernel objects, their attributes, and their - relationships to one another. - - Users can use sysfs to ascertain useful information about the running - kernel, such as the devices the kernel has discovered on each bus and - which driver each is bound to. sysfs can also be used to tune devices - and other kernel subsystems. - - Some system agents rely on the information in sysfs to operate. - /sbin/hotplug uses device and object attributes in sysfs to assist in - delegating policy decisions, like persistently naming devices. - - sysfs is currently used by the block subsystem to mount the root - partition. If sysfs is disabled you must specify the boot device on - the kernel boot command line via its major and minor numbers. For - example, "root=03:01" for /dev/hda1. - - Designers of embedded systems may wish to say N here to conserve space. +source "fs/sysfs/Kconfig" config TMPFS bool "Virtual memory file system support (former shm fs)" diff --git a/fs/sysfs/Kconfig b/fs/sysfs/Kconfig new file mode 100644 index 000000000000..f4b67588b9d6 --- /dev/null +++ b/fs/sysfs/Kconfig @@ -0,0 +1,23 @@ +config SYSFS + bool "sysfs file system support" if EMBEDDED + default y + help + The sysfs filesystem is a virtual filesystem that the kernel uses to + export internal kernel objects, their attributes, and their + relationships to one another. + + Users can use sysfs to ascertain useful information about the running + kernel, such as the devices the kernel has discovered on each bus and + which driver each is bound to. sysfs can also be used to tune devices + and other kernel subsystems. + + Some system agents rely on the information in sysfs to operate. + /sbin/hotplug uses device and object attributes in sysfs to assist in + delegating policy decisions, like persistently naming devices. + + sysfs is currently used by the block subsystem to mount the root + partition. If sysfs is disabled you must specify the boot device on + the kernel boot command line via its major and minor numbers. For + example, "root=03:01" for /dev/hda1. + + Designers of embedded systems may wish to say N here to conserve space. -- cgit v1.2.2 From 4591dabe27ec0f7928fb73d93694698e21dc769e Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:42:52 +0300 Subject: fs/Kconfig: move configfs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 12 +----------- fs/configfs/Kconfig | 11 +++++++++++ 2 files changed, 12 insertions(+), 11 deletions(-) create mode 100644 fs/configfs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index e9103b9862b4..d7d7f1b93635 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -182,17 +182,7 @@ config HUGETLBFS config HUGETLB_PAGE def_bool HUGETLBFS -config CONFIGFS_FS - tristate "Userspace-driven configuration filesystem" - depends on SYSFS - help - configfs is a ram-based filesystem that provides the converse - of sysfs's functionality. Where sysfs is a filesystem-based - view of kernel objects, configfs is a filesystem-based manager - of kernel objects, or config_items. - - Both sysfs and configfs can and should exist together on the - same system. One is not a replacement for the other. +source "fs/configfs/Kconfig" endmenu diff --git a/fs/configfs/Kconfig b/fs/configfs/Kconfig new file mode 100644 index 000000000000..13587cc97a0b --- /dev/null +++ b/fs/configfs/Kconfig @@ -0,0 +1,11 @@ +config CONFIGFS_FS + tristate "Userspace-driven configuration filesystem" + depends on SYSFS + help + configfs is a ram-based filesystem that provides the converse + of sysfs's functionality. Where sysfs is a filesystem-based + view of kernel objects, configfs is a filesystem-based manager + of kernel objects, or config_items. + + Both sysfs and configfs can and should exist together on the + same system. One is not a replacement for the other. -- cgit v1.2.2 From bc2de2ae67177bc60bb9ab41c97ea4f827d52821 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:48:46 +0300 Subject: fs/Kconfig: move adfs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 28 +--------------------------- fs/adfs/Kconfig | 27 +++++++++++++++++++++++++++ 2 files changed, 28 insertions(+), 27 deletions(-) create mode 100644 fs/adfs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index d7d7f1b93635..e4492c75efe6 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -201,33 +201,7 @@ menuconfig MISC_FILESYSTEMS if MISC_FILESYSTEMS -config ADFS_FS - tristate "ADFS file system support (EXPERIMENTAL)" - depends on BLOCK && EXPERIMENTAL - help - The Acorn Disc Filing System is the standard file system of the - RiscOS operating system which runs on Acorn's ARM-based Risc PC - systems and the Acorn Archimedes range of machines. If you say Y - here, Linux will be able to read from ADFS partitions on hard drives - and from ADFS-formatted floppy discs. If you also want to be able to - write to those devices, say Y to "ADFS write support" below. - - The ADFS partition should be the first partition (i.e., - /dev/[hs]d?1) on each of your drives. Please read the file - for further details. - - To compile this code as a module, choose M here: the module will be - called adfs. - - If unsure, say N. - -config ADFS_FS_RW - bool "ADFS write support (DANGEROUS)" - depends on ADFS_FS - help - If you say Y here, you will be able to write to ADFS partitions on - hard drives and ADFS-formatted floppy disks. This is experimental - codes, so if you're unsure, say N. +source "fs/adfs/Kconfig" config AFFS_FS tristate "Amiga FFS file system support (EXPERIMENTAL)" diff --git a/fs/adfs/Kconfig b/fs/adfs/Kconfig new file mode 100644 index 000000000000..e55182a74605 --- /dev/null +++ b/fs/adfs/Kconfig @@ -0,0 +1,27 @@ +config ADFS_FS + tristate "ADFS file system support (EXPERIMENTAL)" + depends on BLOCK && EXPERIMENTAL + help + The Acorn Disc Filing System is the standard file system of the + RiscOS operating system which runs on Acorn's ARM-based Risc PC + systems and the Acorn Archimedes range of machines. If you say Y + here, Linux will be able to read from ADFS partitions on hard drives + and from ADFS-formatted floppy discs. If you also want to be able to + write to those devices, say Y to "ADFS write support" below. + + The ADFS partition should be the first partition (i.e., + /dev/[hs]d?1) on each of your drives. Please read the file + for further details. + + To compile this code as a module, choose M here: the module will be + called adfs. + + If unsure, say N. + +config ADFS_FS_RW + bool "ADFS write support (DANGEROUS)" + depends on ADFS_FS + help + If you say Y here, you will be able to write to ADFS partitions on + hard drives and ADFS-formatted floppy disks. This is experimental + codes, so if you're unsure, say N. -- cgit v1.2.2 From 10951bf05d952bf6d13094f66a0dccd11dec311e Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:49:44 +0300 Subject: fs/Kconfig: move affs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 23 +---------------------- fs/affs/Kconfig | 21 +++++++++++++++++++++ 2 files changed, 22 insertions(+), 22 deletions(-) create mode 100644 fs/affs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index e4492c75efe6..3e025af4d8b4 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -202,28 +202,7 @@ menuconfig MISC_FILESYSTEMS if MISC_FILESYSTEMS source "fs/adfs/Kconfig" - -config AFFS_FS - tristate "Amiga FFS file system support (EXPERIMENTAL)" - depends on BLOCK && EXPERIMENTAL - help - The Fast File System (FFS) is the common file system used on hard - disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20). Say Y - if you want to be able to read and write files from and to an Amiga - FFS partition on your hard drive. Amiga floppies however cannot be - read with this driver due to an incompatibility of the floppy - controller used in an Amiga and the standard floppy controller in - PCs and workstations. Read - and . - - With this driver you can also mount disk files used by Bernd - Schmidt's Un*X Amiga Emulator - (). - If you want to do this, you will also need to say Y or M to "Loop - device support", above. - - To compile this file system support as a module, choose M here: the - module will be called affs. If unsure, say N. +source "fs/affs/Kconfig" config ECRYPT_FS tristate "eCrypt filesystem layer support (EXPERIMENTAL)" diff --git a/fs/affs/Kconfig b/fs/affs/Kconfig new file mode 100644 index 000000000000..cfad9afb4762 --- /dev/null +++ b/fs/affs/Kconfig @@ -0,0 +1,21 @@ +config AFFS_FS + tristate "Amiga FFS file system support (EXPERIMENTAL)" + depends on BLOCK && EXPERIMENTAL + help + The Fast File System (FFS) is the common file system used on hard + disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20). Say Y + if you want to be able to read and write files from and to an Amiga + FFS partition on your hard drive. Amiga floppies however cannot be + read with this driver due to an incompatibility of the floppy + controller used in an Amiga and the standard floppy controller in + PCs and workstations. Read + and . + + With this driver you can also mount disk files used by Bernd + Schmidt's Un*X Amiga Emulator + (). + If you want to do this, you will also need to say Y or M to "Loop + device support", above. + + To compile this file system support as a module, choose M here: the + module will be called affs. If unsure, say N. -- cgit v1.2.2 From 295c896cb95de18004ef5e1b53f44c2ad001f936 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:50:50 +0300 Subject: fs/Kconfig: move ecryptfs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 13 +------------ fs/ecryptfs/Kconfig | 11 +++++++++++ 2 files changed, 12 insertions(+), 12 deletions(-) create mode 100644 fs/ecryptfs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index 3e025af4d8b4..1c79baf55db2 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -203,18 +203,7 @@ if MISC_FILESYSTEMS source "fs/adfs/Kconfig" source "fs/affs/Kconfig" - -config ECRYPT_FS - tristate "eCrypt filesystem layer support (EXPERIMENTAL)" - depends on EXPERIMENTAL && KEYS && CRYPTO && NET - help - Encrypted filesystem that operates on the VFS layer. See - to learn more about - eCryptfs. Userspace components are required and can be - obtained from . - - To compile this file system support as a module, choose M here: the - module will be called ecryptfs. +source "fs/ecryptfs/Kconfig" config HFS_FS tristate "Apple Macintosh file system support (EXPERIMENTAL)" diff --git a/fs/ecryptfs/Kconfig b/fs/ecryptfs/Kconfig new file mode 100644 index 000000000000..0c754e64232b --- /dev/null +++ b/fs/ecryptfs/Kconfig @@ -0,0 +1,11 @@ +config ECRYPT_FS + tristate "eCrypt filesystem layer support (EXPERIMENTAL)" + depends on EXPERIMENTAL && KEYS && CRYPTO && NET + help + Encrypted filesystem that operates on the VFS layer. See + to learn more about + eCryptfs. Userspace components are required and can be + obtained from . + + To compile this file system support as a module, choose M here: the + module will be called ecryptfs. -- cgit v1.2.2 From b08bac1f185b2281c3decb4f8e15e8f41f96e974 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:53:24 +0300 Subject: fs/Kconfig: move hfs, hfsplus out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 29 ++--------------------------- fs/hfs/Kconfig | 12 ++++++++++++ fs/hfsplus/Kconfig | 13 +++++++++++++ 3 files changed, 27 insertions(+), 27 deletions(-) create mode 100644 fs/hfs/Kconfig create mode 100644 fs/hfsplus/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index 1c79baf55db2..3b48ab4f0b77 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -204,33 +204,8 @@ if MISC_FILESYSTEMS source "fs/adfs/Kconfig" source "fs/affs/Kconfig" source "fs/ecryptfs/Kconfig" - -config HFS_FS - tristate "Apple Macintosh file system support (EXPERIMENTAL)" - depends on BLOCK && EXPERIMENTAL - select NLS - help - If you say Y here, you will be able to mount Macintosh-formatted - floppy disks and hard drive partitions with full read-write access. - Please read to learn about - the available mount options. - - To compile this file system support as a module, choose M here: the - module will be called hfs. - -config HFSPLUS_FS - tristate "Apple Extended HFS file system support" - depends on BLOCK - select NLS - select NLS_UTF8 - help - If you say Y here, you will be able to mount extended format - Macintosh-formatted hard drive partitions with full read-write access. - - This file system is often called HFS+ and was introduced with - MacOS 8. It includes all Mac specific filesystem data such as - data forks and creator codes, but it also has several UNIX - style features such as file ownership and permissions. +source "fs/hfs/Kconfig" +source "fs/hfsplus/Kconfig" config BEFS_FS tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)" diff --git a/fs/hfs/Kconfig b/fs/hfs/Kconfig new file mode 100644 index 000000000000..b77c5bc20f8a --- /dev/null +++ b/fs/hfs/Kconfig @@ -0,0 +1,12 @@ +config HFS_FS + tristate "Apple Macintosh file system support (EXPERIMENTAL)" + depends on BLOCK && EXPERIMENTAL + select NLS + help + If you say Y here, you will be able to mount Macintosh-formatted + floppy disks and hard drive partitions with full read-write access. + Please read to learn about + the available mount options. + + To compile this file system support as a module, choose M here: the + module will be called hfs. diff --git a/fs/hfsplus/Kconfig b/fs/hfsplus/Kconfig new file mode 100644 index 000000000000..a63371815aab --- /dev/null +++ b/fs/hfsplus/Kconfig @@ -0,0 +1,13 @@ +config HFSPLUS_FS + tristate "Apple Extended HFS file system support" + depends on BLOCK + select NLS + select NLS_UTF8 + help + If you say Y here, you will be able to mount extended format + Macintosh-formatted hard drive partitions with full read-write access. + + This file system is often called HFS+ and was introduced with + MacOS 8. It includes all Mac specific filesystem data such as + data forks and creator codes, but it also has several UNIX + style features such as file ownership and permissions. -- cgit v1.2.2 From 0b09eb32985d5fbec567e83b18db3dec14d1fef9 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:54:16 +0300 Subject: fs/Kconfig: move befs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 28 +--------------------------- fs/befs/Kconfig | 26 ++++++++++++++++++++++++++ 2 files changed, 27 insertions(+), 27 deletions(-) create mode 100644 fs/befs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index 3b48ab4f0b77..cfddc0a76add 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -206,33 +206,7 @@ source "fs/affs/Kconfig" source "fs/ecryptfs/Kconfig" source "fs/hfs/Kconfig" source "fs/hfsplus/Kconfig" - -config BEFS_FS - tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)" - depends on BLOCK && EXPERIMENTAL - select NLS - help - The BeOS File System (BeFS) is the native file system of Be, Inc's - BeOS. Notable features include support for arbitrary attributes - on files and directories, and database-like indices on selected - attributes. (Also note that this driver doesn't make those features - available at this time). It is a 64 bit filesystem, so it supports - extremely large volumes and files. - - If you use this filesystem, you should also say Y to at least one - of the NLS (native language support) options below. - - If you don't know what this is about, say N. - - To compile this as a module, choose M here: the module will be - called befs. - -config BEFS_DEBUG - bool "Debug BeFS" - depends on BEFS_FS - help - If you say Y here, you can use the 'debug' mount option to enable - debugging output from the driver. +source "fs/befs/Kconfig" config BFS_FS tristate "BFS file system support (EXPERIMENTAL)" diff --git a/fs/befs/Kconfig b/fs/befs/Kconfig new file mode 100644 index 000000000000..7835d30f211f --- /dev/null +++ b/fs/befs/Kconfig @@ -0,0 +1,26 @@ +config BEFS_FS + tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)" + depends on BLOCK && EXPERIMENTAL + select NLS + help + The BeOS File System (BeFS) is the native file system of Be, Inc's + BeOS. Notable features include support for arbitrary attributes + on files and directories, and database-like indices on selected + attributes. (Also note that this driver doesn't make those features + available at this time). It is a 64 bit filesystem, so it supports + extremely large volumes and files. + + If you use this filesystem, you should also say Y to at least one + of the NLS (native language support) options below. + + If you don't know what this is about, say N. + + To compile this as a module, choose M here: the module will be + called befs. + +config BEFS_DEBUG + bool "Debug BeFS" + depends on BEFS_FS + help + If you say Y here, you can use the 'debug' mount option to enable + debugging output from the driver. -- cgit v1.2.2 From 0ff423849de3fe98c06d30a8ac73103c8741914c Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:55:13 +0300 Subject: fs/Kconfig: move bfs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 23 +---------------------- fs/bfs/Kconfig | 19 +++++++++++++++++++ 2 files changed, 20 insertions(+), 22 deletions(-) create mode 100644 fs/bfs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index cfddc0a76add..9acf3a2d2313 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -207,28 +207,7 @@ source "fs/ecryptfs/Kconfig" source "fs/hfs/Kconfig" source "fs/hfsplus/Kconfig" source "fs/befs/Kconfig" - -config BFS_FS - tristate "BFS file system support (EXPERIMENTAL)" - depends on BLOCK && EXPERIMENTAL - help - Boot File System (BFS) is a file system used under SCO UnixWare to - allow the bootloader access to the kernel image and other important - files during the boot process. It is usually mounted under /stand - and corresponds to the slice marked as "STAND" in the UnixWare - partition. You should say Y if you want to read or write the files - on your /stand slice from within Linux. You then also need to say Y - to "UnixWare slices support", below. More information about the BFS - file system is contained in the file - . - - If you don't know what this is about, say N. - - To compile this as a module, choose M here: the module will be called - bfs. Note that the file system of your root partition (the one - containing the directory /) cannot be compiled as a module. - - +source "fs/bfs/Kconfig" config EFS_FS tristate "EFS file system support (read only) (EXPERIMENTAL)" diff --git a/fs/bfs/Kconfig b/fs/bfs/Kconfig new file mode 100644 index 000000000000..c2336c62024f --- /dev/null +++ b/fs/bfs/Kconfig @@ -0,0 +1,19 @@ +config BFS_FS + tristate "BFS file system support (EXPERIMENTAL)" + depends on BLOCK && EXPERIMENTAL + help + Boot File System (BFS) is a file system used under SCO UnixWare to + allow the bootloader access to the kernel image and other important + files during the boot process. It is usually mounted under /stand + and corresponds to the slice marked as "STAND" in the UnixWare + partition. You should say Y if you want to read or write the files + on your /stand slice from within Linux. You then also need to say Y + to "UnixWare slices support", below. More information about the BFS + file system is contained in the file + . + + If you don't know what this is about, say N. + + To compile this as a module, choose M here: the module will be called + bfs. Note that the file system of your root partition (the one + containing the directory /) cannot be compiled as a module. -- cgit v1.2.2 From 571f0a0bdeeb2d1692751b6c5df15dafb483c7ff Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:56:07 +0300 Subject: fs/Kconfig: move efs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 17 +---------------- fs/efs/Kconfig | 14 ++++++++++++++ 2 files changed, 15 insertions(+), 16 deletions(-) create mode 100644 fs/efs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index 9acf3a2d2313..fad19083285c 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -208,22 +208,7 @@ source "fs/hfs/Kconfig" source "fs/hfsplus/Kconfig" source "fs/befs/Kconfig" source "fs/bfs/Kconfig" - -config EFS_FS - tristate "EFS file system support (read only) (EXPERIMENTAL)" - depends on BLOCK && EXPERIMENTAL - help - EFS is an older file system used for non-ISO9660 CD-ROMs and hard - disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer - uses the XFS file system for hard disk partitions however). - - This implementation only offers read-only access. If you don't know - what all this is about, it's safe to say N. For more information - about EFS see its home page at . - - To compile the EFS file system support as a module, choose M here: the - module will be called efs. - +source "fs/efs/Kconfig" source "fs/jffs2/Kconfig" # UBIFS File system configuration source "fs/ubifs/Kconfig" diff --git a/fs/efs/Kconfig b/fs/efs/Kconfig new file mode 100644 index 000000000000..6ebfc1c207a8 --- /dev/null +++ b/fs/efs/Kconfig @@ -0,0 +1,14 @@ +config EFS_FS + tristate "EFS file system support (read only) (EXPERIMENTAL)" + depends on BLOCK && EXPERIMENTAL + help + EFS is an older file system used for non-ISO9660 CD-ROMs and hard + disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer + uses the XFS file system for hard disk partitions however). + + This implementation only offers read-only access. If you don't know + what all this is about, it's safe to say N. For more information + about EFS see its home page at . + + To compile the EFS file system support as a module, choose M here: the + module will be called efs. -- cgit v1.2.2 From 2a22783be0fbbd63599dd6aacf8bc2ddab941bf7 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:56:54 +0300 Subject: fs/Kconfig: move cramfs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 21 +-------------------- fs/cramfs/Kconfig | 19 +++++++++++++++++++ 2 files changed, 20 insertions(+), 20 deletions(-) create mode 100644 fs/cramfs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index fad19083285c..d7b84dfed4f8 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -212,26 +212,7 @@ source "fs/efs/Kconfig" source "fs/jffs2/Kconfig" # UBIFS File system configuration source "fs/ubifs/Kconfig" - -config CRAMFS - tristate "Compressed ROM file system support (cramfs)" - depends on BLOCK - select ZLIB_INFLATE - help - Saying Y here includes support for CramFs (Compressed ROM File - System). CramFs is designed to be a simple, small, and compressed - file system for ROM based embedded systems. CramFs is read-only, - limited to 256MB file systems (with 16MB files), and doesn't support - 16/32 bits uid/gid, hard links and timestamps. - - See and - for further information. - - To compile this as a module, choose M here: the module will be called - cramfs. Note that the root file system (the one containing the - directory /) cannot be compiled as a module. - - If unsure, say N. +source "fs/cramfs/Kconfig" config SQUASHFS tristate "SquashFS 4.0 - Squashed file system support" diff --git a/fs/cramfs/Kconfig b/fs/cramfs/Kconfig new file mode 100644 index 000000000000..cd06466f365e --- /dev/null +++ b/fs/cramfs/Kconfig @@ -0,0 +1,19 @@ +config CRAMFS + tristate "Compressed ROM file system support (cramfs)" + depends on BLOCK + select ZLIB_INFLATE + help + Saying Y here includes support for CramFs (Compressed ROM File + System). CramFs is designed to be a simple, small, and compressed + file system for ROM based embedded systems. CramFs is read-only, + limited to 256MB file systems (with 16MB files), and doesn't support + 16/32 bits uid/gid, hard links and timestamps. + + See and + for further information. + + To compile this as a module, choose M here: the module will be called + cramfs. Note that the root file system (the one containing the + directory /) cannot be compiled as a module. + + If unsure, say N. -- cgit v1.2.2 From 22635ec9e0cb5afbc1eaa25495ae28da8416aac3 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:57:46 +0300 Subject: fs/Kconfig: move squashfs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 53 +---------------------------------------------------- fs/squashfs/Kconfig | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 52 insertions(+), 52 deletions(-) create mode 100644 fs/squashfs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index d7b84dfed4f8..d44a698463c7 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -213,58 +213,7 @@ source "fs/jffs2/Kconfig" # UBIFS File system configuration source "fs/ubifs/Kconfig" source "fs/cramfs/Kconfig" - -config SQUASHFS - tristate "SquashFS 4.0 - Squashed file system support" - depends on BLOCK - select ZLIB_INFLATE - help - Saying Y here includes support for SquashFS 4.0 (a Compressed - Read-Only File System). Squashfs is a highly compressed read-only - filesystem for Linux. It uses zlib compression to compress both - files, inodes and directories. Inodes in the system are very small - and all blocks are packed to minimise data overhead. Block sizes - greater than 4K are supported up to a maximum of 1 Mbytes (default - block size 128K). SquashFS 4.0 supports 64 bit filesystems and files - (larger than 4GB), full uid/gid information, hard links and - timestamps. - - Squashfs is intended for general read-only filesystem use, for - archival use (i.e. in cases where a .tar.gz file may be used), and in - embedded systems where low overhead is needed. Further information - and tools are available from http://squashfs.sourceforge.net. - - If you want to compile this as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . The module - will be called squashfs. Note that the root file system (the one - containing the directory /) cannot be compiled as a module. - - If unsure, say N. - -config SQUASHFS_EMBEDDED - - bool "Additional option for memory-constrained systems" - depends on SQUASHFS - default n - help - Saying Y here allows you to specify cache size. - - If unsure, say N. - -config SQUASHFS_FRAGMENT_CACHE_SIZE - int "Number of fragments cached" if SQUASHFS_EMBEDDED - depends on SQUASHFS - default "3" - help - By default SquashFS caches the last 3 fragments read from - the filesystem. Increasing this amount may mean SquashFS - has to re-read fragments less often from disk, at the expense - of extra system memory. Decreasing this amount will mean - SquashFS uses less memory at the expense of extra reads from disk. - - Note there must be at least one cached fragment. Anything - much more than three will probably not make much difference. +source "fs/squashfs/Kconfig" config VXFS_FS tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)" diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig new file mode 100644 index 000000000000..25a00d19d686 --- /dev/null +++ b/fs/squashfs/Kconfig @@ -0,0 +1,51 @@ +config SQUASHFS + tristate "SquashFS 4.0 - Squashed file system support" + depends on BLOCK + select ZLIB_INFLATE + help + Saying Y here includes support for SquashFS 4.0 (a Compressed + Read-Only File System). Squashfs is a highly compressed read-only + filesystem for Linux. It uses zlib compression to compress both + files, inodes and directories. Inodes in the system are very small + and all blocks are packed to minimise data overhead. Block sizes + greater than 4K are supported up to a maximum of 1 Mbytes (default + block size 128K). SquashFS 4.0 supports 64 bit filesystems and files + (larger than 4GB), full uid/gid information, hard links and + timestamps. + + Squashfs is intended for general read-only filesystem use, for + archival use (i.e. in cases where a .tar.gz file may be used), and in + embedded systems where low overhead is needed. Further information + and tools are available from http://squashfs.sourceforge.net. + + If you want to compile this as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read . The module + will be called squashfs. Note that the root file system (the one + containing the directory /) cannot be compiled as a module. + + If unsure, say N. + +config SQUASHFS_EMBEDDED + + bool "Additional option for memory-constrained systems" + depends on SQUASHFS + default n + help + Saying Y here allows you to specify cache size. + + If unsure, say N. + +config SQUASHFS_FRAGMENT_CACHE_SIZE + int "Number of fragments cached" if SQUASHFS_EMBEDDED + depends on SQUASHFS + default "3" + help + By default SquashFS caches the last 3 fragments read from + the filesystem. Increasing this amount may mean SquashFS + has to re-read fragments less often from disk, at the expense + of extra system memory. Decreasing this amount will mean + SquashFS uses less memory at the expense of extra reads from disk. + + Note there must be at least one cached fragment. Anything + much more than three will probably not make much difference. -- cgit v1.2.2 From 22135169ddc536b1f7d7f070c7980fe4bcdaa20b Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:58:51 +0300 Subject: fs/Kconfig: move vxfs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 18 +----------------- fs/freevxfs/Kconfig | 16 ++++++++++++++++ 2 files changed, 17 insertions(+), 17 deletions(-) create mode 100644 fs/freevxfs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index d44a698463c7..58ab4df56441 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -214,23 +214,7 @@ source "fs/jffs2/Kconfig" source "fs/ubifs/Kconfig" source "fs/cramfs/Kconfig" source "fs/squashfs/Kconfig" - -config VXFS_FS - tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)" - depends on BLOCK - help - FreeVxFS is a file system driver that support the VERITAS VxFS(TM) - file system format. VERITAS VxFS(TM) is the standard file system - of SCO UnixWare (and possibly others) and optionally available - for Sunsoft Solaris, HP-UX and many other operating systems. - Currently only readonly access is supported. - - NOTE: the file system type as used by mount(1), mount(2) and - fstab(5) is 'vxfs' as it describes the file system format, not - the actual driver. - - To compile this as a module, choose M here: the module will be - called freevxfs. If unsure, say N. +source "fs/freevxfs/Kconfig" config MINIX_FS tristate "Minix file system support" diff --git a/fs/freevxfs/Kconfig b/fs/freevxfs/Kconfig new file mode 100644 index 000000000000..8dc1cd5c1efe --- /dev/null +++ b/fs/freevxfs/Kconfig @@ -0,0 +1,16 @@ +config VXFS_FS + tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)" + depends on BLOCK + help + FreeVxFS is a file system driver that support the VERITAS VxFS(TM) + file system format. VERITAS VxFS(TM) is the standard file system + of SCO UnixWare (and possibly others) and optionally available + for Sunsoft Solaris, HP-UX and many other operating systems. + Currently only readonly access is supported. + + NOTE: the file system type as used by mount(1), mount(2) and + fstab(5) is 'vxfs' as it describes the file system format, not + the actual driver. + + To compile this as a module, choose M here: the module will be + called freevxfs. If unsure, say N. -- cgit v1.2.2 From 8b1cd7d3c5daaed6c4dec3697c1fc113eb817df0 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 10:59:49 +0300 Subject: fs/Kconfig: move minix out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 19 +------------------ fs/minix/Kconfig | 17 +++++++++++++++++ 2 files changed, 18 insertions(+), 18 deletions(-) create mode 100644 fs/minix/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index 58ab4df56441..3323379fdb3c 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -215,24 +215,7 @@ source "fs/ubifs/Kconfig" source "fs/cramfs/Kconfig" source "fs/squashfs/Kconfig" source "fs/freevxfs/Kconfig" - -config MINIX_FS - tristate "Minix file system support" - depends on BLOCK - help - Minix is a simple operating system used in many classes about OS's. - The minix file system (method to organize files on a hard disk - partition or a floppy disk) was the original file system for Linux, - but has been superseded by the second extended file system ext2fs. - You don't want to use the minix file system on your hard disk - because of certain built-in restrictions, but it is sometimes found - on older Linux floppy disks. This option will enlarge your kernel - by about 28 KB. If unsure, say N. - - To compile this file system support as a module, choose M here: the - module will be called minix. Note that the file system of your root - partition (the one containing the directory /) cannot be compiled as - a module. +source "fs/minix/Kconfig" config OMFS_FS tristate "SonicBlue Optimized MPEG File System support" diff --git a/fs/minix/Kconfig b/fs/minix/Kconfig new file mode 100644 index 000000000000..0fd7ca994264 --- /dev/null +++ b/fs/minix/Kconfig @@ -0,0 +1,17 @@ +config MINIX_FS + tristate "Minix file system support" + depends on BLOCK + help + Minix is a simple operating system used in many classes about OS's. + The minix file system (method to organize files on a hard disk + partition or a floppy disk) was the original file system for Linux, + but has been superseded by the second extended file system ext2fs. + You don't want to use the minix file system on your hard disk + because of certain built-in restrictions, but it is sometimes found + on older Linux floppy disks. This option will enlarge your kernel + by about 28 KB. If unsure, say N. + + To compile this file system support as a module, choose M here: the + module will be called minix. Note that the file system of your root + partition (the one containing the directory /) cannot be compiled as + a module. -- cgit v1.2.2 From da55e6f92830df9bba7c87438344479c60d44fdb Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 11:00:41 +0300 Subject: fs/Kconfig: move omfs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 15 +-------------- fs/omfs/Kconfig | 13 +++++++++++++ 2 files changed, 14 insertions(+), 14 deletions(-) create mode 100644 fs/omfs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index 3323379fdb3c..da5e8f956a82 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -216,20 +216,7 @@ source "fs/cramfs/Kconfig" source "fs/squashfs/Kconfig" source "fs/freevxfs/Kconfig" source "fs/minix/Kconfig" - -config OMFS_FS - tristate "SonicBlue Optimized MPEG File System support" - depends on BLOCK - select CRC_ITU_T - help - This is the proprietary file system used by the Rio Karma music - player and ReplayTV DVR. Despite the name, this filesystem is not - more efficient than a standard FS for MPEG files, in fact likely - the opposite is true. Say Y if you have either of these devices - and wish to mount its disk. - - To compile this file system support as a module, choose M here: the - module will be called omfs. If unsure, say N. +source "fs/omfs/Kconfig" config HPFS_FS tristate "OS/2 HPFS file system support" diff --git a/fs/omfs/Kconfig b/fs/omfs/Kconfig new file mode 100644 index 000000000000..b1b9a0aba6fd --- /dev/null +++ b/fs/omfs/Kconfig @@ -0,0 +1,13 @@ +config OMFS_FS + tristate "SonicBlue Optimized MPEG File System support" + depends on BLOCK + select CRC_ITU_T + help + This is the proprietary file system used by the Rio Karma music + player and ReplayTV DVR. Despite the name, this filesystem is not + more efficient than a standard FS for MPEG files, in fact likely + the opposite is true. Say Y if you have either of these devices + and wish to mount its disk. + + To compile this file system support as a module, choose M here: the + module will be called omfs. If unsure, say N. -- cgit v1.2.2 From 928ea192959f188e6a4de95b293e3973887917b5 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 11:01:26 +0300 Subject: fs/Kconfig: move hpfs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 17 +---------------- fs/hpfs/Kconfig | 14 ++++++++++++++ 2 files changed, 15 insertions(+), 16 deletions(-) create mode 100644 fs/hpfs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index da5e8f956a82..9bead7c680d7 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -217,22 +217,7 @@ source "fs/squashfs/Kconfig" source "fs/freevxfs/Kconfig" source "fs/minix/Kconfig" source "fs/omfs/Kconfig" - -config HPFS_FS - tristate "OS/2 HPFS file system support" - depends on BLOCK - help - OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS - is the file system used for organizing files on OS/2 hard disk - partitions. Say Y if you want to be able to read files from and - write files to an OS/2 HPFS partition on your hard drive. OS/2 - floppies however are in regular MSDOS format, so you don't need this - option in order to be able to read them. Read - . - - To compile this file system support as a module, choose M here: the - module will be called hpfs. If unsure, say N. - +source "fs/hpfs/Kconfig" config QNX4FS_FS tristate "QNX4 file system support (read only)" diff --git a/fs/hpfs/Kconfig b/fs/hpfs/Kconfig new file mode 100644 index 000000000000..56bd15c5bf6c --- /dev/null +++ b/fs/hpfs/Kconfig @@ -0,0 +1,14 @@ +config HPFS_FS + tristate "OS/2 HPFS file system support" + depends on BLOCK + help + OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS + is the file system used for organizing files on OS/2 hard disk + partitions. Say Y if you want to be able to read files from and + write files to an OS/2 HPFS partition on your hard drive. OS/2 + floppies however are in regular MSDOS format, so you don't need this + option in order to be able to read them. Read + . + + To compile this file system support as a module, choose M here: the + module will be called hpfs. If unsure, say N. -- cgit v1.2.2 From 4c7415830c7ab465ff54ca7ffc20bfb1b59906c3 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 11:02:21 +0300 Subject: fs/Kconfig: move qnx4 out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 27 +-------------------------- fs/qnx4/Kconfig | 25 +++++++++++++++++++++++++ 2 files changed, 26 insertions(+), 26 deletions(-) create mode 100644 fs/qnx4/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index 9bead7c680d7..b348d2e8cc66 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -218,32 +218,7 @@ source "fs/freevxfs/Kconfig" source "fs/minix/Kconfig" source "fs/omfs/Kconfig" source "fs/hpfs/Kconfig" - -config QNX4FS_FS - tristate "QNX4 file system support (read only)" - depends on BLOCK - help - This is the file system used by the real-time operating systems - QNX 4 and QNX 6 (the latter is also called QNX RTP). - Further information is available at . - Say Y if you intend to mount QNX hard disks or floppies. - Unless you say Y to "QNX4FS read-write support" below, you will - only be able to read these file systems. - - To compile this file system support as a module, choose M here: the - module will be called qnx4. - - If you don't know whether you need it, then you don't need it: - answer N. - -config QNX4FS_RW - bool "QNX4FS write support (DANGEROUS)" - depends on QNX4FS_FS && EXPERIMENTAL && BROKEN - help - Say Y if you want to test write support for QNX4 file systems. - - It's currently broken, so for now: - answer N. +source "fs/qnx4/Kconfig" config ROMFS_FS tristate "ROM file system support" diff --git a/fs/qnx4/Kconfig b/fs/qnx4/Kconfig new file mode 100644 index 000000000000..be8e0e1445b6 --- /dev/null +++ b/fs/qnx4/Kconfig @@ -0,0 +1,25 @@ +config QNX4FS_FS + tristate "QNX4 file system support (read only)" + depends on BLOCK + help + This is the file system used by the real-time operating systems + QNX 4 and QNX 6 (the latter is also called QNX RTP). + Further information is available at . + Say Y if you intend to mount QNX hard disks or floppies. + Unless you say Y to "QNX4FS read-write support" below, you will + only be able to read these file systems. + + To compile this file system support as a module, choose M here: the + module will be called qnx4. + + If you don't know whether you need it, then you don't need it: + answer N. + +config QNX4FS_RW + bool "QNX4FS write support (DANGEROUS)" + depends on QNX4FS_FS && EXPERIMENTAL && BROKEN + help + Say Y if you want to test write support for QNX4 file systems. + + It's currently broken, so for now: + answer N. -- cgit v1.2.2 From 41810246df2e65c66dc1f0da79b282a95b664fc7 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 11:03:34 +0300 Subject: fs/Kconfig: move romfs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 19 +------------------ fs/romfs/Kconfig | 16 ++++++++++++++++ 2 files changed, 17 insertions(+), 18 deletions(-) create mode 100644 fs/romfs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index b348d2e8cc66..d8672ccdc69e 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -219,24 +219,7 @@ source "fs/minix/Kconfig" source "fs/omfs/Kconfig" source "fs/hpfs/Kconfig" source "fs/qnx4/Kconfig" - -config ROMFS_FS - tristate "ROM file system support" - depends on BLOCK - ---help--- - This is a very small read-only file system mainly intended for - initial ram disks of installation disks, but it could be used for - other read-only media as well. Read - for details. - - To compile this file system support as a module, choose M here: the - module will be called romfs. Note that the file system of your - root partition (the one containing the directory /) cannot be a - module. - - If you don't know whether you need it, then you don't need it: - answer N. - +source "fs/romfs/Kconfig" config SYSV_FS tristate "System V/Xenix/V7/Coherent file system support" diff --git a/fs/romfs/Kconfig b/fs/romfs/Kconfig new file mode 100644 index 000000000000..1a17020f9faf --- /dev/null +++ b/fs/romfs/Kconfig @@ -0,0 +1,16 @@ +config ROMFS_FS + tristate "ROM file system support" + depends on BLOCK + ---help--- + This is a very small read-only file system mainly intended for + initial ram disks of installation disks, but it could be used for + other read-only media as well. Read + for details. + + To compile this file system support as a module, choose M here: the + module will be called romfs. Note that the file system of your + root partition (the one containing the directory /) cannot be a + module. + + If you don't know whether you need it, then you don't need it: + answer N. -- cgit v1.2.2 From 8af915ba1d1eae1f9f31fa8c5db8040492dc4785 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 11:04:23 +0300 Subject: fs/Kconfig: move sysv out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 39 +-------------------------------------- fs/sysv/Kconfig | 36 ++++++++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+), 38 deletions(-) create mode 100644 fs/sysv/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index d8672ccdc69e..e1cdb8310647 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -220,44 +220,7 @@ source "fs/omfs/Kconfig" source "fs/hpfs/Kconfig" source "fs/qnx4/Kconfig" source "fs/romfs/Kconfig" - -config SYSV_FS - tristate "System V/Xenix/V7/Coherent file system support" - depends on BLOCK - help - SCO, Xenix and Coherent are commercial Unix systems for Intel - machines, and Version 7 was used on the DEC PDP-11. Saying Y - here would allow you to read from their floppies and hard disk - partitions. - - If you have floppies or hard disk partitions like that, it is likely - that they contain binaries from those other Unix systems; in order - to run these binaries, you will want to install linux-abi which is - a set of kernel modules that lets you run SCO, Xenix, Wyse, - UnixWare, Dell Unix and System V programs under Linux. It is - available via FTP (user: ftp) from - ). - NOTE: that will work only for binaries from Intel-based systems; - PDP ones will have to wait until somebody ports Linux to -11 ;-) - - If you only intend to mount files from some other Unix over the - network using NFS, you don't need the System V file system support - (but you need NFS file system support obviously). - - Note that this option is generally not needed for floppies, since a - good portable way to transport files and directories between unixes - (and even other operating systems) is given by the tar program ("man - tar" or preferably "info tar"). Note also that this option has - nothing whatsoever to do with the option "System V IPC". Read about - the System V file system in - . - Saying Y here will enlarge your kernel by about 27 KB. - - To compile this as a module, choose M here: the module will be called - sysv. - - If you haven't heard about all of this before, it's safe to say N. - +source "fs/sysv/Kconfig" config UFS_FS tristate "UFS file system support (read only)" diff --git a/fs/sysv/Kconfig b/fs/sysv/Kconfig new file mode 100644 index 000000000000..33aeb4b75db1 --- /dev/null +++ b/fs/sysv/Kconfig @@ -0,0 +1,36 @@ +config SYSV_FS + tristate "System V/Xenix/V7/Coherent file system support" + depends on BLOCK + help + SCO, Xenix and Coherent are commercial Unix systems for Intel + machines, and Version 7 was used on the DEC PDP-11. Saying Y + here would allow you to read from their floppies and hard disk + partitions. + + If you have floppies or hard disk partitions like that, it is likely + that they contain binaries from those other Unix systems; in order + to run these binaries, you will want to install linux-abi which is + a set of kernel modules that lets you run SCO, Xenix, Wyse, + UnixWare, Dell Unix and System V programs under Linux. It is + available via FTP (user: ftp) from + ). + NOTE: that will work only for binaries from Intel-based systems; + PDP ones will have to wait until somebody ports Linux to -11 ;-) + + If you only intend to mount files from some other Unix over the + network using NFS, you don't need the System V file system support + (but you need NFS file system support obviously). + + Note that this option is generally not needed for floppies, since a + good portable way to transport files and directories between unixes + (and even other operating systems) is given by the tar program ("man + tar" or preferably "info tar"). Note also that this option has + nothing whatsoever to do with the option "System V IPC". Read about + the System V file system in + . + Saying Y here will enlarge your kernel by about 27 KB. + + To compile this as a module, choose M here: the module will be called + sysv. + + If you haven't heard about all of this before, it's safe to say N. -- cgit v1.2.2 From a276a52f9f1b1059bddade71df18ceb6481534a6 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 11:05:02 +0300 Subject: fs/Kconfig: move ufs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 45 +-------------------------------------------- fs/ufs/Kconfig | 43 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+), 44 deletions(-) create mode 100644 fs/ufs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index e1cdb8310647..35941e8a17c5 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -221,50 +221,7 @@ source "fs/hpfs/Kconfig" source "fs/qnx4/Kconfig" source "fs/romfs/Kconfig" source "fs/sysv/Kconfig" - -config UFS_FS - tristate "UFS file system support (read only)" - depends on BLOCK - help - BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD, - OpenBSD and NeXTstep) use a file system called UFS. Some System V - Unixes can create and mount hard disk partitions and diskettes using - this file system as well. Saying Y here will allow you to read from - these partitions; if you also want to write to them, say Y to the - experimental "UFS file system write support", below. Please read the - file for more information. - - The recently released UFS2 variant (used in FreeBSD 5.x) is - READ-ONLY supported. - - Note that this option is generally not needed for floppies, since a - good portable way to transport files and directories between unixes - (and even other operating systems) is given by the tar program ("man - tar" or preferably "info tar"). - - When accessing NeXTstep files, you may need to convert them from the - NeXT character set to the Latin1 character set; use the program - recode ("info recode") for this purpose. - - To compile the UFS file system support as a module, choose M here: the - module will be called ufs. - - If you haven't heard about all of this before, it's safe to say N. - -config UFS_FS_WRITE - bool "UFS file system write support (DANGEROUS)" - depends on UFS_FS && EXPERIMENTAL - help - Say Y here if you want to try writing to UFS partitions. This is - experimental, so you should back up your UFS partitions beforehand. - -config UFS_DEBUG - bool "UFS debugging" - depends on UFS_FS - help - If you are experiencing any problems with the UFS filesystem, say - Y here. This will result in _many_ additional debugging messages to be - written to the system log. +source "fs/ufs/Kconfig" endif # MISC_FILESYSTEMS diff --git a/fs/ufs/Kconfig b/fs/ufs/Kconfig new file mode 100644 index 000000000000..e4f10a40768a --- /dev/null +++ b/fs/ufs/Kconfig @@ -0,0 +1,43 @@ +config UFS_FS + tristate "UFS file system support (read only)" + depends on BLOCK + help + BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD, + OpenBSD and NeXTstep) use a file system called UFS. Some System V + Unixes can create and mount hard disk partitions and diskettes using + this file system as well. Saying Y here will allow you to read from + these partitions; if you also want to write to them, say Y to the + experimental "UFS file system write support", below. Please read the + file for more information. + + The recently released UFS2 variant (used in FreeBSD 5.x) is + READ-ONLY supported. + + Note that this option is generally not needed for floppies, since a + good portable way to transport files and directories between unixes + (and even other operating systems) is given by the tar program ("man + tar" or preferably "info tar"). + + When accessing NeXTstep files, you may need to convert them from the + NeXT character set to the Latin1 character set; use the program + recode ("info recode") for this purpose. + + To compile the UFS file system support as a module, choose M here: the + module will be called ufs. + + If you haven't heard about all of this before, it's safe to say N. + +config UFS_FS_WRITE + bool "UFS file system write support (DANGEROUS)" + depends on UFS_FS && EXPERIMENTAL + help + Say Y here if you want to try writing to UFS partitions. This is + experimental, so you should back up your UFS partitions beforehand. + +config UFS_DEBUG + bool "UFS debugging" + depends on UFS_FS + help + If you are experiencing any problems with the UFS filesystem, say + Y here. This will result in _many_ additional debugging messages to be + written to the system log. -- cgit v1.2.2 From 97afe47ac378615d727fc2f0ffa1b58e9837f438 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 11:07:41 +0300 Subject: fs/Kconfig: move nfs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 87 +--------------------------------------------------------- fs/nfs/Kconfig | 86 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 87 insertions(+), 86 deletions(-) create mode 100644 fs/nfs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index 35941e8a17c5..f07c72b76662 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -241,92 +241,7 @@ menuconfig NETWORK_FILESYSTEMS if NETWORK_FILESYSTEMS -config NFS_FS - tristate "NFS client support" - depends on INET - select LOCKD - select SUNRPC - select NFS_ACL_SUPPORT if NFS_V3_ACL - help - Choose Y here if you want to access files residing on other - computers using Sun's Network File System protocol. To compile - this file system support as a module, choose M here: the module - will be called nfs. - - To mount file systems exported by NFS servers, you also need to - install the user space mount.nfs command which can be found in - the Linux nfs-utils package, available from http://linux-nfs.org/. - Information about using the mount command is available in the - mount(8) man page. More detail about the Linux NFS client - implementation is available via the nfs(5) man page. - - Below you can choose which versions of the NFS protocol are - available in the kernel to mount NFS servers. Support for NFS - version 2 (RFC 1094) is always available when NFS_FS is selected. - - To configure a system which mounts its root file system via NFS - at boot time, say Y here, select "Kernel level IP - autoconfiguration" in the NETWORK menu, and select "Root file - system on NFS" below. You cannot compile this file system as a - module in this case. - - If unsure, say N. - -config NFS_V3 - bool "NFS client support for NFS version 3" - depends on NFS_FS - help - This option enables support for version 3 of the NFS protocol - (RFC 1813) in the kernel's NFS client. - - If unsure, say Y. - -config NFS_V3_ACL - bool "NFS client support for the NFSv3 ACL protocol extension" - depends on NFS_V3 - help - Some NFS servers support an auxiliary NFSv3 ACL protocol that - Sun added to Solaris but never became an official part of the - NFS version 3 protocol. This protocol extension allows - applications on NFS clients to manipulate POSIX Access Control - Lists on files residing on NFS servers. NFS servers enforce - ACLs on local files whether this protocol is available or not. - - Choose Y here if your NFS server supports the Solaris NFSv3 ACL - protocol extension and you want your NFS client to allow - applications to access and modify ACLs on files on the server. - - Most NFS servers don't support the Solaris NFSv3 ACL protocol - extension. You can choose N here or specify the "noacl" mount - option to prevent your NFS client from trying to use the NFSv3 - ACL protocol. - - If unsure, say N. - -config NFS_V4 - bool "NFS client support for NFS version 4 (EXPERIMENTAL)" - depends on NFS_FS && EXPERIMENTAL - select RPCSEC_GSS_KRB5 - help - This option enables support for version 4 of the NFS protocol - (RFC 3530) in the kernel's NFS client. - - To mount NFS servers using NFSv4, you also need to install user - space programs which can be found in the Linux nfs-utils package, - available from http://linux-nfs.org/. - - If unsure, say N. - -config ROOT_NFS - bool "Root file system on NFS" - depends on NFS_FS=y && IP_PNP - help - If you want your system to mount its root file system via NFS, - choose Y here. This is common practice for managing systems - without local permanent storage. For details, read - . - - Most people say N here. +source "fs/nfs/Kconfig" config NFSD tristate "NFS server support" diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig new file mode 100644 index 000000000000..36fe20d6eba2 --- /dev/null +++ b/fs/nfs/Kconfig @@ -0,0 +1,86 @@ +config NFS_FS + tristate "NFS client support" + depends on INET + select LOCKD + select SUNRPC + select NFS_ACL_SUPPORT if NFS_V3_ACL + help + Choose Y here if you want to access files residing on other + computers using Sun's Network File System protocol. To compile + this file system support as a module, choose M here: the module + will be called nfs. + + To mount file systems exported by NFS servers, you also need to + install the user space mount.nfs command which can be found in + the Linux nfs-utils package, available from http://linux-nfs.org/. + Information about using the mount command is available in the + mount(8) man page. More detail about the Linux NFS client + implementation is available via the nfs(5) man page. + + Below you can choose which versions of the NFS protocol are + available in the kernel to mount NFS servers. Support for NFS + version 2 (RFC 1094) is always available when NFS_FS is selected. + + To configure a system which mounts its root file system via NFS + at boot time, say Y here, select "Kernel level IP + autoconfiguration" in the NETWORK menu, and select "Root file + system on NFS" below. You cannot compile this file system as a + module in this case. + + If unsure, say N. + +config NFS_V3 + bool "NFS client support for NFS version 3" + depends on NFS_FS + help + This option enables support for version 3 of the NFS protocol + (RFC 1813) in the kernel's NFS client. + + If unsure, say Y. + +config NFS_V3_ACL + bool "NFS client support for the NFSv3 ACL protocol extension" + depends on NFS_V3 + help + Some NFS servers support an auxiliary NFSv3 ACL protocol that + Sun added to Solaris but never became an official part of the + NFS version 3 protocol. This protocol extension allows + applications on NFS clients to manipulate POSIX Access Control + Lists on files residing on NFS servers. NFS servers enforce + ACLs on local files whether this protocol is available or not. + + Choose Y here if your NFS server supports the Solaris NFSv3 ACL + protocol extension and you want your NFS client to allow + applications to access and modify ACLs on files on the server. + + Most NFS servers don't support the Solaris NFSv3 ACL protocol + extension. You can choose N here or specify the "noacl" mount + option to prevent your NFS client from trying to use the NFSv3 + ACL protocol. + + If unsure, say N. + +config NFS_V4 + bool "NFS client support for NFS version 4 (EXPERIMENTAL)" + depends on NFS_FS && EXPERIMENTAL + select RPCSEC_GSS_KRB5 + help + This option enables support for version 4 of the NFS protocol + (RFC 3530) in the kernel's NFS client. + + To mount NFS servers using NFSv4, you also need to install user + space programs which can be found in the Linux nfs-utils package, + available from http://linux-nfs.org/. + + If unsure, say N. + +config ROOT_NFS + bool "Root file system on NFS" + depends on NFS_FS=y && IP_PNP + help + If you want your system to mount its root file system via NFS, + choose Y here. This is common practice for managing systems + without local permanent storage. For details, read + . + + Most people say N here. -- cgit v1.2.2 From e2b329e2002685c1b0fa3c06caadc0936b7f507f Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 11:08:58 +0300 Subject: fs/Kconfig: move nfsd out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 82 +-------------------------------------------------------- fs/nfsd/Kconfig | 80 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 81 insertions(+), 81 deletions(-) create mode 100644 fs/nfsd/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index f07c72b76662..acceb6e62bff 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -242,87 +242,7 @@ menuconfig NETWORK_FILESYSTEMS if NETWORK_FILESYSTEMS source "fs/nfs/Kconfig" - -config NFSD - tristate "NFS server support" - depends on INET - select LOCKD - select SUNRPC - select EXPORTFS - select NFS_ACL_SUPPORT if NFSD_V2_ACL - help - Choose Y here if you want to allow other computers to access - files residing on this system using Sun's Network File System - protocol. To compile the NFS server support as a module, - choose M here: the module will be called nfsd. - - You may choose to use a user-space NFS server instead, in which - case you can choose N here. - - To export local file systems using NFS, you also need to install - user space programs which can be found in the Linux nfs-utils - package, available from http://linux-nfs.org/. More detail about - the Linux NFS server implementation is available via the - exports(5) man page. - - Below you can choose which versions of the NFS protocol are - available to clients mounting the NFS server on this system. - Support for NFS version 2 (RFC 1094) is always available when - CONFIG_NFSD is selected. - - If unsure, say N. - -config NFSD_V2_ACL - bool - depends on NFSD - -config NFSD_V3 - bool "NFS server support for NFS version 3" - depends on NFSD - help - This option enables support in your system's NFS server for - version 3 of the NFS protocol (RFC 1813). - - If unsure, say Y. - -config NFSD_V3_ACL - bool "NFS server support for the NFSv3 ACL protocol extension" - depends on NFSD_V3 - select NFSD_V2_ACL - help - Solaris NFS servers support an auxiliary NFSv3 ACL protocol that - never became an official part of the NFS version 3 protocol. - This protocol extension allows applications on NFS clients to - manipulate POSIX Access Control Lists on files residing on NFS - servers. NFS servers enforce POSIX ACLs on local files whether - this protocol is available or not. - - This option enables support in your system's NFS server for the - NFSv3 ACL protocol extension allowing NFS clients to manipulate - POSIX ACLs on files exported by your system's NFS server. NFS - clients which support the Solaris NFSv3 ACL protocol can then - access and modify ACLs on your NFS server. - - To store ACLs on your NFS server, you also need to enable ACL- - related CONFIG options for your local file systems of choice. - - If unsure, say N. - -config NFSD_V4 - bool "NFS server support for NFS version 4 (EXPERIMENTAL)" - depends on NFSD && PROC_FS && EXPERIMENTAL - select NFSD_V3 - select FS_POSIX_ACL - select RPCSEC_GSS_KRB5 - help - This option enables support in your system's NFS server for - version 4 of the NFS protocol (RFC 3530). - - To export files using NFSv4, you need to install additional user - space programs which can be found in the Linux nfs-utils package, - available from http://linux-nfs.org/. - - If unsure, say N. +source "fs/nfsd/Kconfig" config LOCKD tristate diff --git a/fs/nfsd/Kconfig b/fs/nfsd/Kconfig new file mode 100644 index 000000000000..44d7d04dab95 --- /dev/null +++ b/fs/nfsd/Kconfig @@ -0,0 +1,80 @@ +config NFSD + tristate "NFS server support" + depends on INET + select LOCKD + select SUNRPC + select EXPORTFS + select NFS_ACL_SUPPORT if NFSD_V2_ACL + help + Choose Y here if you want to allow other computers to access + files residing on this system using Sun's Network File System + protocol. To compile the NFS server support as a module, + choose M here: the module will be called nfsd. + + You may choose to use a user-space NFS server instead, in which + case you can choose N here. + + To export local file systems using NFS, you also need to install + user space programs which can be found in the Linux nfs-utils + package, available from http://linux-nfs.org/. More detail about + the Linux NFS server implementation is available via the + exports(5) man page. + + Below you can choose which versions of the NFS protocol are + available to clients mounting the NFS server on this system. + Support for NFS version 2 (RFC 1094) is always available when + CONFIG_NFSD is selected. + + If unsure, say N. + +config NFSD_V2_ACL + bool + depends on NFSD + +config NFSD_V3 + bool "NFS server support for NFS version 3" + depends on NFSD + help + This option enables support in your system's NFS server for + version 3 of the NFS protocol (RFC 1813). + + If unsure, say Y. + +config NFSD_V3_ACL + bool "NFS server support for the NFSv3 ACL protocol extension" + depends on NFSD_V3 + select NFSD_V2_ACL + help + Solaris NFS servers support an auxiliary NFSv3 ACL protocol that + never became an official part of the NFS version 3 protocol. + This protocol extension allows applications on NFS clients to + manipulate POSIX Access Control Lists on files residing on NFS + servers. NFS servers enforce POSIX ACLs on local files whether + this protocol is available or not. + + This option enables support in your system's NFS server for the + NFSv3 ACL protocol extension allowing NFS clients to manipulate + POSIX ACLs on files exported by your system's NFS server. NFS + clients which support the Solaris NFSv3 ACL protocol can then + access and modify ACLs on your NFS server. + + To store ACLs on your NFS server, you also need to enable ACL- + related CONFIG options for your local file systems of choice. + + If unsure, say N. + +config NFSD_V4 + bool "NFS server support for NFS version 4 (EXPERIMENTAL)" + depends on NFSD && PROC_FS && EXPERIMENTAL + select NFSD_V3 + select FS_POSIX_ACL + select RPCSEC_GSS_KRB5 + help + This option enables support in your system's NFS server for + version 4 of the NFS protocol (RFC 3530). + + To export files using NFSv4, you need to install additional user + space programs which can be found in the Linux nfs-utils package, + available from http://linux-nfs.org/. + + If unsure, say N. -- cgit v1.2.2 From 9098c24f35f7da6c89a83420acf21e3d7b35151d Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 11:11:56 +0300 Subject: fs/Kconfig: move sunrpc out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 80 +------------------------------------------------------------- 1 file changed, 1 insertion(+), 79 deletions(-) (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index acceb6e62bff..1d7c0f6fade4 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -264,85 +264,7 @@ config NFS_COMMON depends on NFSD || NFS_FS default y -config SUNRPC - tristate - -config SUNRPC_GSS - tristate - -config SUNRPC_XPRT_RDMA - tristate - depends on SUNRPC && INFINIBAND && EXPERIMENTAL - default SUNRPC && INFINIBAND - help - This option enables an RPC client transport capability that - allows the NFS client to mount servers via an RDMA-enabled - transport. - - To compile RPC client RDMA transport support as a module, - choose M here: the module will be called xprtrdma. - - If unsure, say N. - -config SUNRPC_REGISTER_V4 - bool "Register local RPC services via rpcbind v4 (EXPERIMENTAL)" - depends on SUNRPC && EXPERIMENTAL - default n - help - Sun added support for registering RPC services at an IPv6 - address by creating two new versions of the rpcbind protocol - (RFC 1833). - - This option enables support in the kernel RPC server for - registering kernel RPC services via version 4 of the rpcbind - protocol. If you enable this option, you must run a portmapper - daemon that supports rpcbind protocol version 4. - - Serving NFS over IPv6 from knfsd (the kernel's NFS server) - requires that you enable this option and use a portmapper that - supports rpcbind version 4. - - If unsure, say N to get traditional behavior (register kernel - RPC services using only rpcbind version 2). Distributions - using the legacy Linux portmapper daemon must say N here. - -config RPCSEC_GSS_KRB5 - tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)" - depends on SUNRPC && EXPERIMENTAL - select SUNRPC_GSS - select CRYPTO - select CRYPTO_MD5 - select CRYPTO_DES - select CRYPTO_CBC - help - Choose Y here to enable Secure RPC using the Kerberos version 5 - GSS-API mechanism (RFC 1964). - - Secure RPC calls with Kerberos require an auxiliary user-space - daemon which may be found in the Linux nfs-utils package - available from http://linux-nfs.org/. In addition, user-space - Kerberos support should be installed. - - If unsure, say N. - -config RPCSEC_GSS_SPKM3 - tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)" - depends on SUNRPC && EXPERIMENTAL - select SUNRPC_GSS - select CRYPTO - select CRYPTO_MD5 - select CRYPTO_DES - select CRYPTO_CAST5 - select CRYPTO_CBC - help - Choose Y here to enable Secure RPC using the SPKM3 public key - GSS-API mechansim (RFC 2025). - - Secure RPC calls with SPKM3 require an auxiliary userspace - daemon which may be found in the Linux nfs-utils package - available from http://linux-nfs.org/. - - If unsure, say N. +source "net/sunrpc/Kconfig" config SMB_FS tristate "SMB file system support (OBSOLETE, please use CIFS)" -- cgit v1.2.2 From 213a41d404d5ed16528df5aa0ed215adcb1e9d66 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 11:13:16 +0300 Subject: fs/Kconfig: move smbfs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 58 +------------------------------------------------------- fs/smbfs/Kconfig | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 56 insertions(+), 57 deletions(-) create mode 100644 fs/smbfs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index 1d7c0f6fade4..c05ccea75c3a 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -265,63 +265,7 @@ config NFS_COMMON default y source "net/sunrpc/Kconfig" - -config SMB_FS - tristate "SMB file system support (OBSOLETE, please use CIFS)" - depends on INET - select NLS - help - SMB (Server Message Block) is the protocol Windows for Workgroups - (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share - files and printers over local networks. Saying Y here allows you to - mount their file systems (often called "shares" in this context) and - access them just like any other Unix directory. Currently, this - works only if the Windows machines use TCP/IP as the underlying - transport protocol, and not NetBEUI. For details, read - and the SMB-HOWTO, - available from . - - Note: if you just want your box to act as an SMB *server* and make - files and printing services available to Windows clients (which need - to have a TCP/IP stack), you don't need to say Y here; you can use - the program SAMBA (available from ) - for that. - - General information about how to connect Linux, Windows machines and - Macs is on the WWW at . - - To compile the SMB support as a module, choose M here: - the module will be called smbfs. Most people say N, however. - -config SMB_NLS_DEFAULT - bool "Use a default NLS" - depends on SMB_FS - help - Enabling this will make smbfs use nls translations by default. You - need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls - settings and you need to give the default nls for the SMB server as - CONFIG_SMB_NLS_REMOTE. - - The nls settings can be changed at mount time, if your smbmount - supports that, using the codepage and iocharset parameters. - - smbmount from samba 2.2.0 or later supports this. - -config SMB_NLS_REMOTE - string "Default Remote NLS Option" - depends on SMB_NLS_DEFAULT - default "cp437" - help - This setting allows you to specify a default value for which - codepage the server uses. If this field is left blank no - translations will be done by default. The local codepage/charset - default to CONFIG_NLS_DEFAULT. - - The nls settings can be changed at mount time, if your smbmount - supports that, using the codepage and iocharset parameters. - - smbmount from samba 2.2.0 or later supports this. - +source "fs/smbfs/Kconfig" source "fs/cifs/Kconfig" config NCP_FS diff --git a/fs/smbfs/Kconfig b/fs/smbfs/Kconfig new file mode 100644 index 000000000000..e668127c8b2e --- /dev/null +++ b/fs/smbfs/Kconfig @@ -0,0 +1,55 @@ +config SMB_FS + tristate "SMB file system support (OBSOLETE, please use CIFS)" + depends on INET + select NLS + help + SMB (Server Message Block) is the protocol Windows for Workgroups + (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share + files and printers over local networks. Saying Y here allows you to + mount their file systems (often called "shares" in this context) and + access them just like any other Unix directory. Currently, this + works only if the Windows machines use TCP/IP as the underlying + transport protocol, and not NetBEUI. For details, read + and the SMB-HOWTO, + available from . + + Note: if you just want your box to act as an SMB *server* and make + files and printing services available to Windows clients (which need + to have a TCP/IP stack), you don't need to say Y here; you can use + the program SAMBA (available from ) + for that. + + General information about how to connect Linux, Windows machines and + Macs is on the WWW at . + + To compile the SMB support as a module, choose M here: + the module will be called smbfs. Most people say N, however. + +config SMB_NLS_DEFAULT + bool "Use a default NLS" + depends on SMB_FS + help + Enabling this will make smbfs use nls translations by default. You + need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls + settings and you need to give the default nls for the SMB server as + CONFIG_SMB_NLS_REMOTE. + + The nls settings can be changed at mount time, if your smbmount + supports that, using the codepage and iocharset parameters. + + smbmount from samba 2.2.0 or later supports this. + +config SMB_NLS_REMOTE + string "Default Remote NLS Option" + depends on SMB_NLS_DEFAULT + default "cp437" + help + This setting allows you to specify a default value for which + codepage the server uses. If this field is left blank no + translations will be done by default. The local codepage/charset + default to CONFIG_NLS_DEFAULT. + + The nls settings can be changed at mount time, if your smbmount + supports that, using the codepage and iocharset parameters. + + smbmount from samba 2.2.0 or later supports this. -- cgit v1.2.2 From 9d7d6447ef455f4561f63bf6e8f6bef58b42a0a3 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 11:14:15 +0300 Subject: fs/Kconfig: move the rest of ncpfs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 22 ---------------------- fs/ncpfs/Kconfig | 21 +++++++++++++++++++++ 2 files changed, 21 insertions(+), 22 deletions(-) (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index c05ccea75c3a..86a4f1173fa6 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -267,28 +267,6 @@ config NFS_COMMON source "net/sunrpc/Kconfig" source "fs/smbfs/Kconfig" source "fs/cifs/Kconfig" - -config NCP_FS - tristate "NCP file system support (to mount NetWare volumes)" - depends on IPX!=n || INET - help - NCP (NetWare Core Protocol) is a protocol that runs over IPX and is - used by Novell NetWare clients to talk to file servers. It is to - IPX what NFS is to TCP/IP, if that helps. Saying Y here allows you - to mount NetWare file server volumes and to access them just like - any other Unix directory. For details, please read the file - in the kernel source and - the IPX-HOWTO from . - - You do not have to say Y here if you want your Linux box to act as a - file *server* for Novell NetWare clients. - - General information about how to connect Linux, Windows machines and - Macs is on the WWW at . - - To compile this as a module, choose M here: the module will be called - ncpfs. Say N unless you are connected to a Novell network. - source "fs/ncpfs/Kconfig" config CODA_FS diff --git a/fs/ncpfs/Kconfig b/fs/ncpfs/Kconfig index 142808427b25..c931cf22a1f6 100644 --- a/fs/ncpfs/Kconfig +++ b/fs/ncpfs/Kconfig @@ -1,6 +1,27 @@ # # NCP Filesystem configuration # +config NCP_FS + tristate "NCP file system support (to mount NetWare volumes)" + depends on IPX!=n || INET + help + NCP (NetWare Core Protocol) is a protocol that runs over IPX and is + used by Novell NetWare clients to talk to file servers. It is to + IPX what NFS is to TCP/IP, if that helps. Saying Y here allows you + to mount NetWare file server volumes and to access them just like + any other Unix directory. For details, please read the file + in the kernel source and + the IPX-HOWTO from . + + You do not have to say Y here if you want your Linux box to act as a + file *server* for Novell NetWare clients. + + General information about how to connect Linux, Windows machines and + Macs is on the WWW at . + + To compile this as a module, choose M here: the module will be called + ncpfs. Say N unless you are connected to a Novell network. + config NCPFS_PACKET_SIGNING bool "Packet signatures" depends on NCP_FS -- cgit v1.2.2 From 33a1a6fedf08bbcb4b4df74498d697e7a88d39f2 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 11:15:06 +0300 Subject: fs/Kconfig: move coda out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 23 +---------------------- fs/coda/Kconfig | 21 +++++++++++++++++++++ 2 files changed, 22 insertions(+), 22 deletions(-) create mode 100644 fs/coda/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index 86a4f1173fa6..f5cd88790b0f 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -268,28 +268,7 @@ source "net/sunrpc/Kconfig" source "fs/smbfs/Kconfig" source "fs/cifs/Kconfig" source "fs/ncpfs/Kconfig" - -config CODA_FS - tristate "Coda file system support (advanced network fs)" - depends on INET - help - Coda is an advanced network file system, similar to NFS in that it - enables you to mount file systems of a remote server and access them - with regular Unix commands as if they were sitting on your hard - disk. Coda has several advantages over NFS: support for - disconnected operation (e.g. for laptops), read/write server - replication, security model for authentication and encryption, - persistent client caches and write back caching. - - If you say Y here, your Linux box will be able to act as a Coda - *client*. You will need user level code as well, both for the - client and server. Servers are currently user level, i.e. they need - no kernel support. Please read - and check out the Coda - home page . - - To compile the coda client support as a module, choose M here: the - module will be called coda. +source "fs/coda/Kconfig" config AFS_FS tristate "Andrew File System support (AFS) (EXPERIMENTAL)" diff --git a/fs/coda/Kconfig b/fs/coda/Kconfig new file mode 100644 index 000000000000..c0e5a7fad06d --- /dev/null +++ b/fs/coda/Kconfig @@ -0,0 +1,21 @@ +config CODA_FS + tristate "Coda file system support (advanced network fs)" + depends on INET + help + Coda is an advanced network file system, similar to NFS in that it + enables you to mount file systems of a remote server and access them + with regular Unix commands as if they were sitting on your hard + disk. Coda has several advantages over NFS: support for + disconnected operation (e.g. for laptops), read/write server + replication, security model for authentication and encryption, + persistent client caches and write back caching. + + If you say Y here, your Linux box will be able to act as a Coda + *client*. You will need user level code as well, both for the + client and server. Servers are currently user level, i.e. they need + no kernel support. Please read + and check out the Coda + home page . + + To compile the coda client support as a module, choose M here: the + module will be called coda. -- cgit v1.2.2 From b2480c7fbfed172e6ec3ba1c8e80f05a3721b24a Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 11:16:02 +0300 Subject: fs/Kconfig: move afs out Signed-off-by: Alexey Dobriyan --- fs/Kconfig | 23 +---------------------- fs/afs/Kconfig | 21 +++++++++++++++++++++ 2 files changed, 22 insertions(+), 22 deletions(-) create mode 100644 fs/afs/Kconfig (limited to 'fs') diff --git a/fs/Kconfig b/fs/Kconfig index f5cd88790b0f..0563f9f1ab5e 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -269,28 +269,7 @@ source "fs/smbfs/Kconfig" source "fs/cifs/Kconfig" source "fs/ncpfs/Kconfig" source "fs/coda/Kconfig" - -config AFS_FS - tristate "Andrew File System support (AFS) (EXPERIMENTAL)" - depends on INET && EXPERIMENTAL - select AF_RXRPC - help - If you say Y here, you will get an experimental Andrew File System - driver. It currently only supports unsecured read-only AFS access. - - See for more information. - - If unsure, say N. - -config AFS_DEBUG - bool "AFS dynamic debugging" - depends on AFS_FS - help - Say Y here to make runtime controllable debugging messages appear. - - See for more information. - - If unsure, say N. +source "fs/afs/Kconfig" config 9P_FS tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)" diff --git a/fs/afs/Kconfig b/fs/afs/Kconfig new file mode 100644 index 000000000000..e7b522fe15e1 --- /dev/null +++ b/fs/afs/Kconfig @@ -0,0 +1,21 @@ +config AFS_FS + tristate "Andrew File System support (AFS) (EXPERIMENTAL)" + depends on INET && EXPERIMENTAL + select AF_RXRPC + help + If you say Y here, you will get an experimental Andrew File System + driver. It currently only supports unsecured read-only AFS access. + + See for more information. + + If unsure, say N. + +config AFS_DEBUG + bool "AFS dynamic debugging" + depends on AFS_FS + help + Say Y here to make runtime controllable debugging messages appear. + + See for more information. + + If unsure, say N. -- cgit v1.2.2 From 0fcb44088970b18eaf2df4579d64840be6e3bf39 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 22 Jan 2009 11:16:42 +0300 Subject: fs/Kconfig: move 9p out Signed-off-by: Alexey Dobriyan --- fs/9p/Kconfig | 10 ++++++++++ fs/Kconfig | 12 +----------- 2 files changed, 11 insertions(+), 11 deletions(-) create mode 100644 fs/9p/Kconfig (limited to 'fs') diff --git a/fs/9p/Kconfig b/fs/9p/Kconfig new file mode 100644 index 000000000000..74e0723e90bc --- /dev/null +++ b/fs/9p/Kconfig @@ -0,0 +1,10 @@ +config 9P_FS + tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)" + depends on INET && NET_9P && EXPERIMENTAL + help + If you say Y here, you will get experimental support for + Plan 9 resource sharing via the 9P2000 protocol. + + See for more information. + + If unsure, say N. diff --git a/fs/Kconfig b/fs/Kconfig index 0563f9f1ab5e..93945dd0b1ae 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -270,17 +270,7 @@ source "fs/cifs/Kconfig" source "fs/ncpfs/Kconfig" source "fs/coda/Kconfig" source "fs/afs/Kconfig" - -config 9P_FS - tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)" - depends on INET && NET_9P && EXPERIMENTAL - help - If you say Y here, you will get experimental support for - Plan 9 resource sharing via the 9P2000 protocol. - - See for more information. - - If unsure, say N. +source "fs/9p/Kconfig" endif # NETWORK_FILESYSTEMS -- cgit v1.2.2 From bb875b38dc5e343bdb696b2eab8233e4d195e208 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 26 Jan 2009 15:00:58 +0100 Subject: fuse: fix NULL deref in fuse_file_alloc() ff is set to NULL and then dereferenced on line 65. Compile tested only. Signed-off-by: Dan Carpenter Signed-off-by: Miklos Szeredi CC: stable@kernel.org --- fs/fuse/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'fs') diff --git a/fs/fuse/file.c b/fs/fuse/file.c index e8162646a9b5..d9fdb7cec538 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -54,7 +54,7 @@ struct fuse_file *fuse_file_alloc(struct fuse_conn *fc) ff->reserved_req = fuse_request_alloc(); if (!ff->reserved_req) { kfree(ff); - ff = NULL; + return NULL; } else { INIT_LIST_HEAD(&ff->write_entry); atomic_set(&ff->count, 0); -- cgit v1.2.2 From 3ddf1e7f57237ac7c5d5bfb7058f1ea4f970b661 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 26 Jan 2009 15:00:58 +0100 Subject: fuse: fix missing fput on error Fix the leaking file reference if allocation or initialization of fuse_conn failed. Signed-off-by: Miklos Szeredi CC: stable@kernel.org --- fs/fuse/inode.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'fs') diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 47c96fdca1ac..6893717b6536 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -829,15 +829,20 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) if (!file) return -EINVAL; - if (file->f_op != &fuse_dev_operations) + if (file->f_op != &fuse_dev_operations) { + fput(file); return -EINVAL; + } fc = kmalloc(sizeof(*fc), GFP_KERNEL); - if (!fc) + if (!fc) { + fput(file); return -ENOMEM; + } err = fuse_conn_init(fc, sb); if (err) { + fput(file); kfree(fc); return err; } -- cgit v1.2.2 From c2b8f006909b9bf9e165dfdf3c378527938c4497 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 26 Jan 2009 15:00:58 +0100 Subject: fuse: fuse_fill_super error handling cleanup Clean up error handling for the whole of fuse_fill_super() function. Signed-off-by: Miklos Szeredi --- fs/fuse/inode.c | 37 +++++++++++++++++++------------------ 1 file changed, 19 insertions(+), 18 deletions(-) (limited to 'fs') diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 6893717b6536..dc649f6bc3e5 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -805,16 +805,18 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) int err; int is_bdev = sb->s_bdev != NULL; + err = -EINVAL; if (sb->s_flags & MS_MANDLOCK) - return -EINVAL; + goto err; if (!parse_fuse_opt((char *) data, &d, is_bdev)) - return -EINVAL; + goto err; if (is_bdev) { #ifdef CONFIG_BLOCK + err = -EINVAL; if (!sb_set_blocksize(sb, d.blksize)) - return -EINVAL; + goto err; #endif } else { sb->s_blocksize = PAGE_CACHE_SIZE; @@ -826,25 +828,22 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) sb->s_export_op = &fuse_export_operations; file = fget(d.fd); + err = -EINVAL; if (!file) - return -EINVAL; + goto err; - if (file->f_op != &fuse_dev_operations) { - fput(file); - return -EINVAL; - } + if (file->f_op != &fuse_dev_operations) + goto err_fput; fc = kmalloc(sizeof(*fc), GFP_KERNEL); - if (!fc) { - fput(file); - return -ENOMEM; - } + err = -ENOMEM; + if (!fc) + goto err_fput; err = fuse_conn_init(fc, sb); if (err) { - fput(file); kfree(fc); - return err; + goto err_fput; } fc->release = fuse_free_conn; @@ -859,12 +858,12 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) err = -ENOMEM; root = fuse_get_root_inode(sb, d.rootmode); if (!root) - goto err; + goto err_put_conn; root_dentry = d_alloc_root(root); if (!root_dentry) { iput(root); - goto err; + goto err_put_conn; } init_req = fuse_request_alloc(); @@ -908,9 +907,11 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) fuse_request_free(init_req); err_put_root: dput(root_dentry); - err: - fput(file); + err_put_conn: fuse_conn_put(fc); + err_fput: + fput(file); + err: return err; } -- cgit v1.2.2 From 26c3679101dbccc054dcf370143941844ba70531 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 26 Jan 2009 15:00:59 +0100 Subject: fuse: destroy bdi on umount If a fuse filesystem is unmounted but the device file descriptor remains open and a new mount reuses the old device number, then the mount fails with EEXIST and the following warning is printed in the kernel log: WARNING: at fs/sysfs/dir.c:462 sysfs_add_one+0x35/0x3d() sysfs: duplicate filename '0:15' can not be created The cause is that the bdi belonging to the fuse filesystem was destoryed only after the device file was released. Fix this by calling bdi_destroy() from fuse_put_super() instead. Signed-off-by: Miklos Szeredi CC: stable@kernel.org --- fs/fuse/dev.c | 3 ++- fs/fuse/inode.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'fs') diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index e0c7ada08a1f..c4a3d9bbdaa8 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -281,7 +281,8 @@ __releases(&fc->lock) fc->blocked = 0; wake_up_all(&fc->blocked_waitq); } - if (fc->num_background == FUSE_CONGESTION_THRESHOLD) { + if (fc->num_background == FUSE_CONGESTION_THRESHOLD && + fc->connected) { clear_bdi_congested(&fc->bdi, READ); clear_bdi_congested(&fc->bdi, WRITE); } diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index dc649f6bc3e5..459b73dd45e1 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -292,6 +292,7 @@ static void fuse_put_super(struct super_block *sb) list_del(&fc->entry); fuse_ctl_remove_conn(fc); mutex_unlock(&fuse_mutex); + bdi_destroy(&fc->bdi); fuse_conn_put(fc); } @@ -532,7 +533,6 @@ void fuse_conn_put(struct fuse_conn *fc) if (fc->destroy_req) fuse_request_free(fc->destroy_req); mutex_destroy(&fc->inst_mutex); - bdi_destroy(&fc->bdi); fc->release(fc); } } -- cgit v1.2.2 From f6d47a1761896dcd89e3184399a8962dff17267d Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 26 Jan 2009 15:00:59 +0100 Subject: fuse: fix poll notify Move fuse_copy_finish() to before calling fuse_notify_poll_wakeup(). This is not a big issue because fuse_notify_poll_wakeup() should be atomic, but it's cleaner this way, and later uses of notification will need to be able to finish the copying before performing some actions. Signed-off-by: Miklos Szeredi --- fs/fuse/dev.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'fs') diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index c4a3d9bbdaa8..ba76b68c52ff 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -826,16 +826,21 @@ static int fuse_notify_poll(struct fuse_conn *fc, unsigned int size, struct fuse_copy_state *cs) { struct fuse_notify_poll_wakeup_out outarg; - int err; + int err = -EINVAL; if (size != sizeof(outarg)) - return -EINVAL; + goto err; err = fuse_copy_one(cs, &outarg, sizeof(outarg)); if (err) - return err; + goto err; + fuse_copy_finish(cs); return fuse_notify_poll_wakeup(fc, &outarg); + +err: + fuse_copy_finish(cs); + return err; } static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code, @@ -846,6 +851,7 @@ static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code, return fuse_notify_poll(fc, size, cs); default: + fuse_copy_finish(cs); return -EINVAL; } } @@ -924,7 +930,6 @@ static ssize_t fuse_dev_write(struct kiocb *iocb, const struct iovec *iov, */ if (!oh.unique) { err = fuse_notify(fc, oh.error, nbytes - sizeof(oh), &cs); - fuse_copy_finish(&cs); return err ? err : nbytes; } -- cgit v1.2.2 From 3632dee2f8b8a9720329f29eeaa4ec4669a3aff8 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Thu, 22 Jan 2009 15:29:45 +0100 Subject: inotify: clean up inotify_read and fix locking problems If userspace supplies an invalid pointer to a read() of an inotify instance, the inotify device's event list mutex is unlocked twice. This causes an unbalance which effectively leaves the data structure unprotected, and we can trigger oopses by accessing the inotify instance from different tasks concurrently. The best fix (contributed largely by Linus) is a total rewrite of the function in question: On Thu, Jan 22, 2009 at 7:05 AM, Linus Torvalds wrote: > The thing to notice is that: > > - locking is done in just one place, and there is no question about it > not having an unlock. > > - that whole double-while(1)-loop thing is gone. > > - use multiple functions to make nesting and error handling sane > > - do error testing after doing the things you always need to do, ie do > this: > > mutex_lock(..) > ret = function_call(); > mutex_unlock(..) > > .. test ret here .. > > instead of doing conditional exits with unlocking or freeing. > > So if the code is written in this way, it may still be buggy, but at least > it's not buggy because of subtle "forgot to unlock" or "forgot to free" > issues. > > This _always_ unlocks if it locked, and it always frees if it got a > non-error kevent. Cc: John McCutchan Cc: Robert Love Cc: Signed-off-by: Vegard Nossum Signed-off-by: Linus Torvalds --- fs/notify/inotify/inotify_user.c | 135 +++++++++++++++++++++------------------ 1 file changed, 74 insertions(+), 61 deletions(-) (limited to 'fs') diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c index d53a1838d6e8..bed766e435b5 100644 --- a/fs/notify/inotify/inotify_user.c +++ b/fs/notify/inotify/inotify_user.c @@ -427,10 +427,61 @@ static unsigned int inotify_poll(struct file *file, poll_table *wait) return ret; } +/* + * Get an inotify_kernel_event if one exists and is small + * enough to fit in "count". Return an error pointer if + * not large enough. + * + * Called with the device ev_mutex held. + */ +static struct inotify_kernel_event *get_one_event(struct inotify_device *dev, + size_t count) +{ + size_t event_size = sizeof(struct inotify_event); + struct inotify_kernel_event *kevent; + + if (list_empty(&dev->events)) + return NULL; + + kevent = inotify_dev_get_event(dev); + if (kevent->name) + event_size += kevent->event.len; + + if (event_size > count) + return ERR_PTR(-EINVAL); + + remove_kevent(dev, kevent); + return kevent; +} + +/* + * Copy an event to user space, returning how much we copied. + * + * We already checked that the event size is smaller than the + * buffer we had in "get_one_event()" above. + */ +static ssize_t copy_event_to_user(struct inotify_kernel_event *kevent, + char __user *buf) +{ + size_t event_size = sizeof(struct inotify_event); + + if (copy_to_user(buf, &kevent->event, event_size)) + return -EFAULT; + + if (kevent->name) { + buf += event_size; + + if (copy_to_user(buf, kevent->name, kevent->event.len)) + return -EFAULT; + + event_size += kevent->event.len; + } + return event_size; +} + static ssize_t inotify_read(struct file *file, char __user *buf, size_t count, loff_t *pos) { - size_t event_size = sizeof (struct inotify_event); struct inotify_device *dev; char __user *start; int ret; @@ -440,81 +491,43 @@ static ssize_t inotify_read(struct file *file, char __user *buf, dev = file->private_data; while (1) { + struct inotify_kernel_event *kevent; prepare_to_wait(&dev->wq, &wait, TASK_INTERRUPTIBLE); mutex_lock(&dev->ev_mutex); - if (!list_empty(&dev->events)) { - ret = 0; - break; - } + kevent = get_one_event(dev, count); mutex_unlock(&dev->ev_mutex); - if (file->f_flags & O_NONBLOCK) { - ret = -EAGAIN; - break; - } - - if (signal_pending(current)) { - ret = -EINTR; - break; + if (kevent) { + ret = PTR_ERR(kevent); + if (IS_ERR(kevent)) + break; + ret = copy_event_to_user(kevent, buf); + free_kevent(kevent); + if (ret < 0) + break; + buf += ret; + count -= ret; + continue; } - schedule(); - } - - finish_wait(&dev->wq, &wait); - if (ret) - return ret; - - while (1) { - struct inotify_kernel_event *kevent; - - ret = buf - start; - if (list_empty(&dev->events)) + ret = -EAGAIN; + if (file->f_flags & O_NONBLOCK) break; - - kevent = inotify_dev_get_event(dev); - if (event_size + kevent->event.len > count) { - if (ret == 0 && count > 0) { - /* - * could not get a single event because we - * didn't have enough buffer space. - */ - ret = -EINVAL; - } + ret = -EINTR; + if (signal_pending(current)) break; - } - remove_kevent(dev, kevent); - /* - * Must perform the copy_to_user outside the mutex in order - * to avoid a lock order reversal with mmap_sem. - */ - mutex_unlock(&dev->ev_mutex); - - if (copy_to_user(buf, &kevent->event, event_size)) { - ret = -EFAULT; + if (start != buf) break; - } - buf += event_size; - count -= event_size; - - if (kevent->name) { - if (copy_to_user(buf, kevent->name, kevent->event.len)){ - ret = -EFAULT; - break; - } - buf += kevent->event.len; - count -= kevent->event.len; - } - - free_kevent(kevent); - mutex_lock(&dev->ev_mutex); + schedule(); } - mutex_unlock(&dev->ev_mutex); + finish_wait(&dev->wq, &wait); + if (start != buf && ret != -EFAULT) + ret = buf - start; return ret; } -- cgit v1.2.2 From bf935a78814cc9b96d09f612912178adc964ce9c Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Tue, 20 Jan 2009 19:32:59 -0500 Subject: nfsd: fix null dereference on error path We're forgetting to check the return value from groups_alloc(). Signed-off-by: J. Bruce Fields --- fs/nfsd/auth.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'fs') diff --git a/fs/nfsd/auth.c b/fs/nfsd/auth.c index c903e04aa217..b860d3484cd7 100644 --- a/fs/nfsd/auth.c +++ b/fs/nfsd/auth.c @@ -49,6 +49,8 @@ int nfsd_setuser(struct svc_rqst *rqstp, struct svc_export *exp) new->fsuid = exp->ex_anon_uid; new->fsgid = exp->ex_anon_gid; gi = groups_alloc(0); + if (!gi) + goto oom; } else if (flags & NFSEXP_ROOTSQUASH) { if (!new->fsuid) new->fsuid = exp->ex_anon_uid; -- cgit v1.2.2 From b914152a6fbd2cd0441bc293ae8b3f3f1a9407b6 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Tue, 20 Jan 2009 19:34:22 -0500 Subject: nfsd: fix cred leak on every rpc Since override_creds() took its own reference on new, we need to release our own reference. (Note the put_cred on the return value puts the *old* value of current->creds, not the new passed-in value). Signed-off-by: J. Bruce Fields --- fs/nfsd/auth.c | 1 + 1 file changed, 1 insertion(+) (limited to 'fs') diff --git a/fs/nfsd/auth.c b/fs/nfsd/auth.c index b860d3484cd7..5573508f707f 100644 --- a/fs/nfsd/auth.c +++ b/fs/nfsd/auth.c @@ -87,6 +87,7 @@ int nfsd_setuser(struct svc_rqst *rqstp, struct svc_export *exp) new->cap_effective = cap_raise_nfsd_set(new->cap_effective, new->cap_permitted); put_cred(override_creds(new)); + put_cred(new); return 0; oom: -- cgit v1.2.2 From fa82a491275a613b15489aab4b99acecb00958d3 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 22 Jan 2009 14:16:04 -0500 Subject: nfsd: only set file_lock.fl_lmops in nfsd4_lockt if a stateowner is found nfsd4_lockt does a search for a lockstateowner when building the lock struct to test. If one is found, it'll set fl_owner to it. Regardless of whether that happens, it'll also set fl_lmops. Given that this lock is basically a "lightweight" lock that's just used for checking conflicts, setting fl_lmops is probably not appropriate for it. This behavior exposed a bug in DLM's GETLK implementation where it wasn't clearing out the fields in the file_lock before filling in conflicting lock info. While we were able to fix this in DLM, it still seems pointless and dangerous to set the fl_lmops this way when we may have a NULL lockstateowner. Signed-off-by: Jeff Layton Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4state.c | 1 - 1 file changed, 1 deletion(-) (limited to 'fs') diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 88db7d3ec120..b6f60f48e94b 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -2871,7 +2871,6 @@ nfsd4_lockt(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, file_lock.fl_owner = (fl_owner_t)lockt->lt_stateowner; file_lock.fl_pid = current->tgid; file_lock.fl_flags = FL_POSIX; - file_lock.fl_lmops = &nfsd_posix_mng_ops; file_lock.fl_start = lockt->lt_offset; file_lock.fl_end = last_byte_offset(lockt->lt_offset, lockt->lt_length); -- cgit v1.2.2 From 0496e02d8791e7f06673a19a181be30dad6eff70 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 30 Dec 2008 12:39:16 -0500 Subject: cifs: turn smb_send into a wrapper around smb_sendv cifs: turn smb_send into a wrapper around smb_sendv Rename smb_send2 to smb_sendv to make it consistent with kernel naming conventions for functions that take a vector. There's no need to have 2 functions to handle sending SMB calls. Turn smb_send into a wrapper around smb_sendv. This also allows us to properly mark the socket as needing to be reconnected when there's a partial send from smb_send. Also, in practice we always use the address and noblocksnd flag that's attached to the TCP_Server_Info. There's no need to pass them in as separate args to smb_sendv. Signed-off-by: Jeff Layton Acked-by: Dave Kleikamp Signed-off-by: Steve French --- fs/cifs/cifsproto.h | 4 +- fs/cifs/connect.c | 4 +- fs/cifs/transport.c | 107 ++++++++++------------------------------------------ 3 files changed, 22 insertions(+), 93 deletions(-) (limited to 'fs') diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 06f6779988bf..382ba6298809 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -35,8 +35,8 @@ extern struct smb_hdr *cifs_buf_get(void); extern void cifs_buf_release(void *); extern struct smb_hdr *cifs_small_buf_get(void); extern void cifs_small_buf_release(void *); -extern int smb_send(struct socket *, struct smb_hdr *, - unsigned int /* length */ , struct sockaddr *, bool); +extern int smb_send(struct TCP_Server_Info *, struct smb_hdr *, + unsigned int /* length */); extern unsigned int _GetXid(void); extern void _FreeXid(unsigned int); #define GetXid() (int)_GetXid(); cFYI(1,("CIFS VFS: in %s as Xid: %d with uid: %d",__func__, xid,current_fsuid())); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index e9ea394ee075..7419576228fb 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1860,9 +1860,7 @@ ipv4_connect(struct TCP_Server_Info *server) smb_buf = (struct smb_hdr *)ses_init_buf; /* sizeof RFC1002_SESSION_REQUEST with no scope */ smb_buf->smb_buf_length = 0x81000044; - rc = smb_send(socket, smb_buf, 0x44, - (struct sockaddr *) &server->addr.sockAddr, - server->noblocksnd); + rc = smb_send(server, smb_buf, 0x44); kfree(ses_init_buf); msleep(1); /* RFC1001 layer in at least one server requires very short break before negprot diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 7ebe6599ed3a..2c7efd26992d 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -154,81 +154,8 @@ void DeleteTconOplockQEntries(struct cifsTconInfo *tcon) spin_unlock(&GlobalMid_Lock); } -int -smb_send(struct socket *ssocket, struct smb_hdr *smb_buffer, - unsigned int smb_buf_length, struct sockaddr *sin, bool noblocksnd) -{ - int rc = 0; - int i = 0; - struct msghdr smb_msg; - struct kvec iov; - unsigned len = smb_buf_length + 4; - - if (ssocket == NULL) - return -ENOTSOCK; /* BB eventually add reconnect code here */ - iov.iov_base = smb_buffer; - iov.iov_len = len; - - smb_msg.msg_name = sin; - smb_msg.msg_namelen = sizeof(struct sockaddr); - smb_msg.msg_control = NULL; - smb_msg.msg_controllen = 0; - if (noblocksnd) - smb_msg.msg_flags = MSG_DONTWAIT + MSG_NOSIGNAL; - else - smb_msg.msg_flags = MSG_NOSIGNAL; - - /* smb header is converted in header_assemble. bcc and rest of SMB word - area, and byte area if necessary, is converted to littleendian in - cifssmb.c and RFC1001 len is converted to bigendian in smb_send - Flags2 is converted in SendReceive */ - - smb_buffer->smb_buf_length = cpu_to_be32(smb_buffer->smb_buf_length); - cFYI(1, ("Sending smb of length %d", smb_buf_length)); - dump_smb(smb_buffer, len); - - while (len > 0) { - rc = kernel_sendmsg(ssocket, &smb_msg, &iov, 1, len); - if ((rc == -ENOSPC) || (rc == -EAGAIN)) { - i++; - /* smaller timeout here than send2 since smaller size */ - /* Although it may not be required, this also is smaller - oplock break time */ - if (i > 12) { - cERROR(1, - ("sends on sock %p stuck for 7 seconds", - ssocket)); - rc = -EAGAIN; - break; - } - msleep(1 << i); - continue; - } - if (rc < 0) - break; - else - i = 0; /* reset i after each successful send */ - iov.iov_base += rc; - iov.iov_len -= rc; - len -= rc; - } - - if (rc < 0) { - cERROR(1, ("Error %d sending data on socket to server", rc)); - } else { - rc = 0; - } - - /* Don't want to modify the buffer as a - side effect of this call. */ - smb_buffer->smb_buf_length = smb_buf_length; - - return rc; -} - static int -smb_send2(struct TCP_Server_Info *server, struct kvec *iov, int n_vec, - struct sockaddr *sin, bool noblocksnd) +smb_sendv(struct TCP_Server_Info *server, struct kvec *iov, int n_vec) { int rc = 0; int i = 0; @@ -243,11 +170,11 @@ smb_send2(struct TCP_Server_Info *server, struct kvec *iov, int n_vec, if (ssocket == NULL) return -ENOTSOCK; /* BB eventually add reconnect code here */ - smb_msg.msg_name = sin; + smb_msg.msg_name = (struct sockaddr *) &server->addr.sockAddr; smb_msg.msg_namelen = sizeof(struct sockaddr); smb_msg.msg_control = NULL; smb_msg.msg_controllen = 0; - if (noblocksnd) + if (server->noblocksnd) smb_msg.msg_flags = MSG_DONTWAIT + MSG_NOSIGNAL; else smb_msg.msg_flags = MSG_NOSIGNAL; @@ -339,6 +266,18 @@ smb_send2(struct TCP_Server_Info *server, struct kvec *iov, int n_vec, return rc; } +int +smb_send(struct TCP_Server_Info *server, struct smb_hdr *smb_buffer, + unsigned int smb_buf_length) +{ + struct kvec iov; + + iov.iov_base = smb_buffer; + iov.iov_len = smb_buf_length + 4; + + return smb_sendv(server, &iov, 1); +} + static int wait_for_free_request(struct cifsSesInfo *ses, const int long_op) { if (long_op == CIFS_ASYNC_OP) { @@ -540,9 +479,7 @@ SendReceive2(const unsigned int xid, struct cifsSesInfo *ses, #ifdef CONFIG_CIFS_STATS2 atomic_inc(&ses->server->inSend); #endif - rc = smb_send2(ses->server, iov, n_vec, - (struct sockaddr *) &(ses->server->addr.sockAddr), - ses->server->noblocksnd); + rc = smb_sendv(ses->server, iov, n_vec); #ifdef CONFIG_CIFS_STATS2 atomic_dec(&ses->server->inSend); midQ->when_sent = jiffies; @@ -736,9 +673,7 @@ SendReceive(const unsigned int xid, struct cifsSesInfo *ses, #ifdef CONFIG_CIFS_STATS2 atomic_inc(&ses->server->inSend); #endif - rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length, - (struct sockaddr *) &(ses->server->addr.sockAddr), - ses->server->noblocksnd); + rc = smb_send(ses->server, in_buf, in_buf->smb_buf_length); #ifdef CONFIG_CIFS_STATS2 atomic_dec(&ses->server->inSend); midQ->when_sent = jiffies; @@ -879,9 +814,7 @@ send_nt_cancel(struct cifsTconInfo *tcon, struct smb_hdr *in_buf, mutex_unlock(&ses->server->srv_mutex); return rc; } - rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length, - (struct sockaddr *) &(ses->server->addr.sockAddr), - ses->server->noblocksnd); + rc = smb_send(ses->server, in_buf, in_buf->smb_buf_length); mutex_unlock(&ses->server->srv_mutex); return rc; } @@ -973,9 +906,7 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifsTconInfo *tcon, #ifdef CONFIG_CIFS_STATS2 atomic_inc(&ses->server->inSend); #endif - rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length, - (struct sockaddr *) &(ses->server->addr.sockAddr), - ses->server->noblocksnd); + rc = smb_send(ses->server, in_buf, in_buf->smb_buf_length); #ifdef CONFIG_CIFS_STATS2 atomic_dec(&ses->server->inSend); midQ->when_sent = jiffies; -- cgit v1.2.2 From 6a7f8d36c00ab7adef5fb633f7805c91e8c1e139 Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 12 Jan 2009 21:03:25 +0000 Subject: [CIFS] Rename md5 functions to avoid collision with new rt modules When rt modules were added they (each) included their own md5 with names which collided with the existing names of cifs's md5 functions. Renaming cifs's md5 modules so we don't collide with them. > Stephen Rothwell wrote: > When CIFS is built-in (=y) and staging/rt28[67]0 =y, there are multiple > definitions of: > > build-r8250.out:(.text+0x1d8ad0): multiple definition of `MD5Init' > build-r8250.out:(.text+0x1dbb30): multiple definition of `MD5Update' > build-r8250.out:(.text+0x1db9b0): multiple definition of `MD5Final' > > all of which need to have more unique identifiers for their global > symbols (e.g., rt28_md5_init, cifs_md5_init, foo, blah, bar). > CC: Greg K-H Signed-off-by: Steve French --- fs/cifs/cifsencrypt.c | 18 +++++++++--------- fs/cifs/md5.c | 38 +++++++++++++++++++------------------- fs/cifs/md5.h | 6 +++--- 3 files changed, 31 insertions(+), 31 deletions(-) (limited to 'fs') diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c index d4839cf0cb2c..7c9809523f42 100644 --- a/fs/cifs/cifsencrypt.c +++ b/fs/cifs/cifsencrypt.c @@ -48,11 +48,11 @@ static int cifs_calculate_signature(const struct smb_hdr *cifs_pdu, if ((cifs_pdu == NULL) || (signature == NULL) || (key == NULL)) return -EINVAL; - MD5Init(&context); - MD5Update(&context, (char *)&key->data, key->len); - MD5Update(&context, cifs_pdu->Protocol, cifs_pdu->smb_buf_length); + cifs_MD5_init(&context); + cifs_MD5_update(&context, (char *)&key->data, key->len); + cifs_MD5_update(&context, cifs_pdu->Protocol, cifs_pdu->smb_buf_length); - MD5Final(signature, &context); + cifs_MD5_final(signature, &context); return 0; } @@ -96,8 +96,8 @@ static int cifs_calc_signature2(const struct kvec *iov, int n_vec, if ((iov == NULL) || (signature == NULL) || (key == NULL)) return -EINVAL; - MD5Init(&context); - MD5Update(&context, (char *)&key->data, key->len); + cifs_MD5_init(&context); + cifs_MD5_update(&context, (char *)&key->data, key->len); for (i = 0; i < n_vec; i++) { if (iov[i].iov_len == 0) continue; @@ -110,13 +110,13 @@ static int cifs_calc_signature2(const struct kvec *iov, int n_vec, if (i == 0) { if (iov[0].iov_len <= 8) /* cmd field at offset 9 */ break; /* nothing to sign or corrupt header */ - MD5Update(&context, iov[0].iov_base+4, + cifs_MD5_update(&context, iov[0].iov_base+4, iov[0].iov_len-4); } else - MD5Update(&context, iov[i].iov_base, iov[i].iov_len); + cifs_MD5_update(&context, iov[i].iov_base, iov[i].iov_len); } - MD5Final(signature, &context); + cifs_MD5_final(signature, &context); return 0; } diff --git a/fs/cifs/md5.c b/fs/cifs/md5.c index 462bbfefd4b6..98b66a54c319 100644 --- a/fs/cifs/md5.c +++ b/fs/cifs/md5.c @@ -10,8 +10,8 @@ * with every copy. * * To compute the message digest of a chunk of bytes, declare an - * MD5Context structure, pass it to MD5Init, call MD5Update as - * needed on buffers full of bytes, and then call MD5Final, which + * MD5Context structure, pass it to cifs_MD5_init, call cifs_MD5_update as + * needed on buffers full of bytes, and then call cifs_MD5_final, which * will fill a supplied 16-byte array with the digest. */ @@ -45,7 +45,7 @@ byteReverse(unsigned char *buf, unsigned longs) * initialization constants. */ void -MD5Init(struct MD5Context *ctx) +cifs_MD5_init(struct MD5Context *ctx) { ctx->buf[0] = 0x67452301; ctx->buf[1] = 0xefcdab89; @@ -61,7 +61,7 @@ MD5Init(struct MD5Context *ctx) * of bytes. */ void -MD5Update(struct MD5Context *ctx, unsigned char const *buf, unsigned len) +cifs_MD5_update(struct MD5Context *ctx, unsigned char const *buf, unsigned len) { register __u32 t; @@ -110,7 +110,7 @@ MD5Update(struct MD5Context *ctx, unsigned char const *buf, unsigned len) * 1 0* (64-bit count of bits processed, MSB-first) */ void -MD5Final(unsigned char digest[16], struct MD5Context *ctx) +cifs_MD5_final(unsigned char digest[16], struct MD5Context *ctx) { unsigned int count; unsigned char *p; @@ -165,7 +165,7 @@ MD5Final(unsigned char digest[16], struct MD5Context *ctx) /* * The core of the MD5 algorithm, this alters an existing MD5 hash to - * reflect the addition of 16 longwords of new data. MD5Update blocks + * reflect the addition of 16 longwords of new data. cifs_MD5_update blocks * the data and converts bytes into longwords for this routine. */ static void @@ -267,9 +267,9 @@ hmac_md5_init_rfc2104(unsigned char *key, int key_len, unsigned char tk[16]; struct MD5Context tctx; - MD5Init(&tctx); - MD5Update(&tctx, key, key_len); - MD5Final(tk, &tctx); + cifs_MD5_init(&tctx); + cifs_MD5_update(&tctx, key, key_len); + cifs_MD5_final(tk, &tctx); key = tk; key_len = 16; @@ -287,8 +287,8 @@ hmac_md5_init_rfc2104(unsigned char *key, int key_len, ctx->k_opad[i] ^= 0x5c; } - MD5Init(&ctx->ctx); - MD5Update(&ctx->ctx, ctx->k_ipad, 64); + cifs_MD5_init(&ctx->ctx); + cifs_MD5_update(&ctx->ctx, ctx->k_ipad, 64); } #endif @@ -317,8 +317,8 @@ hmac_md5_init_limK_to_64(const unsigned char *key, int key_len, ctx->k_opad[i] ^= 0x5c; } - MD5Init(&ctx->ctx); - MD5Update(&ctx->ctx, ctx->k_ipad, 64); + cifs_MD5_init(&ctx->ctx); + cifs_MD5_update(&ctx->ctx, ctx->k_ipad, 64); } /*********************************************************************** @@ -328,7 +328,7 @@ void hmac_md5_update(const unsigned char *text, int text_len, struct HMACMD5Context *ctx) { - MD5Update(&ctx->ctx, text, text_len); /* then text of datagram */ + cifs_MD5_update(&ctx->ctx, text, text_len); /* then text of datagram */ } /*********************************************************************** @@ -339,12 +339,12 @@ hmac_md5_final(unsigned char *digest, struct HMACMD5Context *ctx) { struct MD5Context ctx_o; - MD5Final(digest, &ctx->ctx); + cifs_MD5_final(digest, &ctx->ctx); - MD5Init(&ctx_o); - MD5Update(&ctx_o, ctx->k_opad, 64); - MD5Update(&ctx_o, digest, 16); - MD5Final(digest, &ctx_o); + cifs_MD5_init(&ctx_o); + cifs_MD5_update(&ctx_o, ctx->k_opad, 64); + cifs_MD5_update(&ctx_o, digest, 16); + cifs_MD5_final(digest, &ctx_o); } /*********************************************************** diff --git a/fs/cifs/md5.h b/fs/cifs/md5.h index f7d4f4197bac..6fba8cb402fd 100644 --- a/fs/cifs/md5.h +++ b/fs/cifs/md5.h @@ -20,10 +20,10 @@ struct HMACMD5Context { }; #endif /* _HMAC_MD5_H */ -void MD5Init(struct MD5Context *context); -void MD5Update(struct MD5Context *context, unsigned char const *buf, +void cifs_MD5_init(struct MD5Context *context); +void cifs_MD5_update(struct MD5Context *context, unsigned char const *buf, unsigned len); -void MD5Final(unsigned char digest[16], struct MD5Context *context); +void cifs_MD5_final(unsigned char digest[16], struct MD5Context *context); /* The following definitions come from lib/hmacmd5.c */ -- cgit v1.2.2 From 42c245447c8c3f998dfe880aba18b6e5129d2976 Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 13 Jan 2009 22:03:55 +0000 Subject: [CIFS] revalidate parent inode when rmdir done within that directory When a search is pending of a parent directory, and a child directory within it is removed, we need to reset the parent directory's time so that we don't reuse the (now stale) search results. Thanks to Gunter Kukkukk for reporting this: > got the following failure notification on irc #samba: > > A user was updating from subversion 1.4 to 1.5, where the > repository is located on a samba share (independent of > unix extensions = Yes or No). > svn 1.4 did work, 1.5 does not. > > The user did a lot of stracing of subversion - and wrote a > testapplet to simulate the failing behaviour. > I've converted the C++ source to C and added some error cases. > > When using "./testdir" on a local file system, "result2" > is always (nil) as expected - cifs vfs behaves different here! > > ./testdir /mnt/cifs/mounted/share > > returns a (failing) valid pointer. Acked-by: Dave Kleikamp Acked-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/CHANGES | 4 +++- fs/cifs/inode.c | 5 +++++ 2 files changed, 8 insertions(+), 1 deletion(-) (limited to 'fs') diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 080703a15f44..73ac7ebd1dfc 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -5,7 +5,9 @@ rather than posix (advisory) byte range locks, even though server would support posix byte range locks. Fix query of root inode when prefixpath specified and user does not have access to query information about the top of the share. Fix problem in 2.6.28 resolving DFS paths to -Samba servers (worked to Windows). +Samba servers (worked to Windows). Fix rmdir so that pending search +(readdir) requests do not get invalid results which include the now +removed directory. Version 1.55 ------------ diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 5ab9896fdcb2..bcf7b5184664 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1285,6 +1285,11 @@ int cifs_rmdir(struct inode *inode, struct dentry *direntry) cifsInode = CIFS_I(direntry->d_inode); cifsInode->time = 0; /* force revalidate to go get info when needed */ + + cifsInode = CIFS_I(inode); + cifsInode->time = 0; /* force revalidate to get parent dir info + since cached search results now invalid */ + direntry->d_inode->i_ctime = inode->i_ctime = inode->i_mtime = current_fs_time(inode->i_sb); -- cgit v1.2.2 From f818dd55c4a8b3519e203900bde0bb780d36e799 Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 19 Jan 2009 02:38:35 +0000 Subject: [CIFS] some cleanup to dir.c prior to addition of posix_open Signed-off-by: Steve French --- fs/cifs/dir.c | 56 +++++++++++++++++++++++++++++++------------------------- 1 file changed, 31 insertions(+), 25 deletions(-) (limited to 'fs') diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 838d9c720a5c..964aad03c5ad 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -129,6 +129,17 @@ cifs_bp_rename_retry: return full_path; } +static void setup_cifs_dentry(struct cifsTconInfo *tcon, + struct dentry *direntry, + struct inode *newinode) +{ + if (tcon->nocase) + direntry->d_op = &cifs_ci_dentry_ops; + else + direntry->d_op = &cifs_dentry_ops; + d_instantiate(direntry, newinode); +} + /* Inode operations in similar order to how they appear in Linux file fs.h */ int @@ -139,14 +150,14 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, int xid; int create_options = CREATE_NOT_DIR; int oplock = 0; + /* BB below access is too much for the mknod to request */ int desiredAccess = GENERIC_READ | GENERIC_WRITE; __u16 fileHandle; struct cifs_sb_info *cifs_sb; - struct cifsTconInfo *pTcon; + struct cifsTconInfo *tcon; char *full_path = NULL; FILE_ALL_INFO *buf = NULL; struct inode *newinode = NULL; - struct cifsFileInfo *pCifsFile = NULL; struct cifsInodeInfo *pCifsInode; int disposition = FILE_OVERWRITE_IF; bool write_only = false; @@ -154,7 +165,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, xid = GetXid(); cifs_sb = CIFS_SB(inode->i_sb); - pTcon = cifs_sb->tcon; + tcon = cifs_sb->tcon; full_path = build_path_from_dentry(direntry); if (full_path == NULL) { @@ -162,6 +173,8 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, return -ENOMEM; } + mode &= ~current->fs->umask; + if (nd && (nd->flags & LOOKUP_OPEN)) { int oflags = nd->intent.open.flags; @@ -196,17 +209,15 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, return -ENOMEM; } - mode &= ~current->fs->umask; - /* * if we're not using unix extensions, see if we need to set * ATTR_READONLY on the create call */ - if (!pTcon->unix_ext && (mode & S_IWUGO) == 0) + if (!tcon->unix_ext && (mode & S_IWUGO) == 0) create_options |= CREATE_OPTION_READONLY; if (cifs_sb->tcon->ses->capabilities & CAP_NT_SMBS) - rc = CIFSSMBOpen(xid, pTcon, full_path, disposition, + rc = CIFSSMBOpen(xid, tcon, full_path, disposition, desiredAccess, create_options, &fileHandle, &oplock, buf, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); @@ -215,7 +226,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, if (rc == -EIO) { /* old server, retry the open legacy style */ - rc = SMBLegacyOpen(xid, pTcon, full_path, disposition, + rc = SMBLegacyOpen(xid, tcon, full_path, disposition, desiredAccess, create_options, &fileHandle, &oplock, buf, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); @@ -225,7 +236,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, } else { /* If Open reported that we actually created a file then we now have to set the mode if possible */ - if ((pTcon->unix_ext) && (oplock & CIFS_CREATE_ACTION)) { + if ((tcon->unix_ext) && (oplock & CIFS_CREATE_ACTION)) { struct cifs_unix_set_info_args args = { .mode = mode, .ctime = NO_CHANGE_64, @@ -244,20 +255,20 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, args.uid = NO_CHANGE_64; args.gid = NO_CHANGE_64; } - CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args, + CIFSSMBUnixSetInfo(xid, tcon, full_path, &args, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); } else { /* BB implement mode setting via Windows security descriptors e.g. */ - /* CIFSSMBWinSetPerms(xid,pTcon,path,mode,-1,-1,nls);*/ + /* CIFSSMBWinSetPerms(xid,tcon,path,mode,-1,-1,nls);*/ /* Could set r/o dos attribute if mode & 0222 == 0 */ } /* server might mask mode so we have to query for it */ - if (pTcon->unix_ext) + if (tcon->unix_ext) rc = cifs_get_inode_info_unix(&newinode, full_path, inode->i_sb, xid); else { @@ -283,22 +294,17 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, } if (rc != 0) { - cFYI(1, - ("Create worked but get_inode_info failed rc = %d", - rc)); - } else { - if (pTcon->nocase) - direntry->d_op = &cifs_ci_dentry_ops; - else - direntry->d_op = &cifs_dentry_ops; - d_instantiate(direntry, newinode); - } + cFYI(1, ("Create worked, get_inode_info failed rc = %d", + rc)); + } else + setup_cifs_dentry(tcon, direntry, newinode); + if ((nd == NULL /* nfsd case - nfs srv does not set nd */) || (!(nd->flags & LOOKUP_OPEN))) { /* mknod case - do not leave file open */ - CIFSSMBClose(xid, pTcon, fileHandle); + CIFSSMBClose(xid, tcon, fileHandle); } else if (newinode) { - pCifsFile = + struct cifsFileInfo *pCifsFile = kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL); if (pCifsFile == NULL) @@ -316,7 +322,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, /* set the following in open now pCifsFile->pfile = file; */ write_lock(&GlobalSMBSeslock); - list_add(&pCifsFile->tlist, &pTcon->openFileList); + list_add(&pCifsFile->tlist, &tcon->openFileList); pCifsInode = CIFS_I(newinode); if (pCifsInode) { /* if readable file instance put first in list*/ -- cgit v1.2.2 From da505c386c9f993e43861791dae339b2219cf8dd Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 19 Jan 2009 03:49:35 +0000 Subject: [CIFS] Make socket retry timeouts consistent between blocking and nonblocking cases We have used approximately 15 second timeouts on nonblocking sends in the past, and also 15 second SMB timeout (waiting for server responses, for most request types). Now that we can do blocking tcp sends, make blocking send timeout approximately the same (15 seconds). Signed-off-by: Steve French --- fs/cifs/connect.c | 4 ++-- fs/cifs/transport.c | 20 +++++++++++++++++++- 2 files changed, 21 insertions(+), 3 deletions(-) (limited to 'fs') diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 7419576228fb..a3537a90a9d9 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1802,7 +1802,7 @@ ipv4_connect(struct TCP_Server_Info *server) * user space buffer */ socket->sk->sk_rcvtimeo = 7 * HZ; - socket->sk->sk_sndtimeo = 3 * HZ; + socket->sk->sk_sndtimeo = 5 * HZ; /* make the bufsizes depend on wsize/rsize and max requests */ if (server->noautotune) { @@ -1953,7 +1953,7 @@ ipv6_connect(struct TCP_Server_Info *server) * user space buffer */ socket->sk->sk_rcvtimeo = 7 * HZ; - socket->sk->sk_sndtimeo = 3 * HZ; + socket->sk->sk_sndtimeo = 5 * HZ; server->ssocket = socket; return rc; diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 2c7efd26992d..0ad3e2d116a6 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -199,7 +199,25 @@ smb_sendv(struct TCP_Server_Info *server, struct kvec *iov, int n_vec) n_vec - first_vec, total_len); if ((rc == -ENOSPC) || (rc == -EAGAIN)) { i++; - if (i >= 14) { + /* if blocking send we try 3 times, since each can block + for 5 seconds. For nonblocking we have to try more + but wait increasing amounts of time allowing time for + socket to clear. The overall time we wait in either + case to send on the socket is about 15 seconds. + Similarly we wait for 15 seconds for + a response from the server in SendReceive[2] + for the server to send a response back for + most types of requests (except SMB Write + past end of file which can be slow, and + blocking lock operations). NFS waits slightly longer + than CIFS, but this can make it take longer for + nonresponsive servers to be detected and 15 seconds + is more than enough time for modern networks to + send a packet. In most cases if we fail to send + after the retries we will kill the socket and + reconnect which may clear the network problem. + */ + if ((i >= 14) || (!server->noblocksnd && (i > 2))) { cERROR(1, ("sends on sock %p stuck for 15 seconds", ssocket)); -- cgit v1.2.2 From a9ac49d303f967be0dabd97cb722c4a13109c6c2 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 22 Jan 2009 14:43:21 -0500 Subject: cifs: make sure we allocate enough storage for socket address The sockaddr declared on the stack in cifs_get_tcp_session is too small for IPv6 addresses. Change it from "struct sockaddr" to "struct sockaddr_storage" to prevent stack corruption when IPv6 is used. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'fs') diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index a3537a90a9d9..2209be943051 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1354,7 +1354,7 @@ cifs_parse_mount_options(char *options, const char *devname, } static struct TCP_Server_Info * -cifs_find_tcp_session(struct sockaddr *addr) +cifs_find_tcp_session(struct sockaddr_storage *addr) { struct list_head *tmp; struct TCP_Server_Info *server; @@ -1374,11 +1374,11 @@ cifs_find_tcp_session(struct sockaddr *addr) if (server->tcpStatus == CifsNew) continue; - if (addr->sa_family == AF_INET && + if (addr->ss_family == AF_INET && (addr4->sin_addr.s_addr != server->addr.sockAddr.sin_addr.s_addr)) continue; - else if (addr->sa_family == AF_INET6 && + else if (addr->ss_family == AF_INET6 && memcmp(&server->addr.sockAddr6.sin6_addr, &addr6->sin6_addr, sizeof(addr6->sin6_addr))) continue; @@ -1419,12 +1419,12 @@ static struct TCP_Server_Info * cifs_get_tcp_session(struct smb_vol *volume_info) { struct TCP_Server_Info *tcp_ses = NULL; - struct sockaddr addr; + struct sockaddr_storage addr; struct sockaddr_in *sin_server = (struct sockaddr_in *) &addr; struct sockaddr_in6 *sin_server6 = (struct sockaddr_in6 *) &addr; int rc; - memset(&addr, 0, sizeof(struct sockaddr)); + memset(&addr, 0, sizeof(struct sockaddr_storage)); if (volume_info->UNCip && volume_info->UNC) { rc = cifs_inet_pton(AF_INET, volume_info->UNCip, @@ -1435,9 +1435,9 @@ cifs_get_tcp_session(struct smb_vol *volume_info) rc = cifs_inet_pton(AF_INET6, volume_info->UNCip, &sin_server6->sin6_addr.in6_u); if (rc > 0) - addr.sa_family = AF_INET6; + addr.ss_family = AF_INET6; } else { - addr.sa_family = AF_INET; + addr.ss_family = AF_INET; } if (rc <= 0) { @@ -1502,7 +1502,7 @@ cifs_get_tcp_session(struct smb_vol *volume_info) tcp_ses->tcpStatus = CifsNew; ++tcp_ses->srv_count; - if (addr.sa_family == AF_INET6) { + if (addr.ss_family == AF_INET6) { cFYI(1, ("attempting ipv6 connect")); /* BB should we allow ipv6 on port 139? */ /* other OS never observed in Wild doing 139 with v6 */ -- cgit v1.2.2 From 9df04e1f25effde823a600e755b51475d438f56b Mon Sep 17 00:00:00 2001 From: Davide Libenzi Date: Thu, 29 Jan 2009 14:25:26 -0800 Subject: epoll: drop max_user_instances and rely only on max_user_watches Linus suggested to put limits where the money is, and max_user_watches already does that w/out the need of max_user_instances. That has the advantage to mitigate the potential DoS while allowing pretty generous default behavior. Allowing top 4% of low memory (per user) to be allocated in epoll watches, we have: LOMEM MAX_WATCHES (per user) 512MB ~178000 1GB ~356000 2GB ~712000 A box with 512MB of lomem, will meet some challenge in hitting 180K watches, socket buffers math teaches us. No more max_user_instances limits then. Signed-off-by: Davide Libenzi Cc: Willy Tarreau Cc: Michael Kerrisk Cc: Bron Gondwana Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/eventpoll.c | 22 ++++------------------ 1 file changed, 4 insertions(+), 18 deletions(-) (limited to 'fs') diff --git a/fs/eventpoll.c b/fs/eventpoll.c index ba2f9ec71192..011b9b8c90c6 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -234,8 +234,6 @@ struct ep_pqueue { /* * Configuration options available inside /proc/sys/fs/epoll/ */ -/* Maximum number of epoll devices, per user */ -static int max_user_instances __read_mostly; /* Maximum number of epoll watched descriptors, per user */ static int max_user_watches __read_mostly; @@ -260,14 +258,6 @@ static struct kmem_cache *pwq_cache __read_mostly; static int zero; ctl_table epoll_table[] = { - { - .procname = "max_user_instances", - .data = &max_user_instances, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = &proc_dointvec_minmax, - .extra1 = &zero, - }, { .procname = "max_user_watches", .data = &max_user_watches, @@ -491,7 +481,6 @@ static void ep_free(struct eventpoll *ep) mutex_unlock(&epmutex); mutex_destroy(&ep->mtx); - atomic_dec(&ep->user->epoll_devs); free_uid(ep->user); kfree(ep); } @@ -581,10 +570,6 @@ static int ep_alloc(struct eventpoll **pep) struct eventpoll *ep; user = get_current_user(); - error = -EMFILE; - if (unlikely(atomic_read(&user->epoll_devs) >= - max_user_instances)) - goto free_uid; error = -ENOMEM; ep = kzalloc(sizeof(*ep), GFP_KERNEL); if (unlikely(!ep)) @@ -1141,7 +1126,6 @@ SYSCALL_DEFINE1(epoll_create1, int, flags) flags & O_CLOEXEC); if (fd < 0) ep_free(ep); - atomic_inc(&ep->user->epoll_devs); error_return: DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d) = %d\n", @@ -1366,8 +1350,10 @@ static int __init eventpoll_init(void) struct sysinfo si; si_meminfo(&si); - max_user_instances = 128; - max_user_watches = (((si.totalram - si.totalhigh) / 32) << PAGE_SHIFT) / + /* + * Allows top 4% of lomem to be allocated for epoll watches (per user). + */ + max_user_watches = (((si.totalram - si.totalhigh) / 25) << PAGE_SHIFT) / EP_ITEM_COST; /* Initialize the structure used to perform safe poll wait head wake ups */ -- cgit v1.2.2