From 1e51764a3c2ac05a23a22b2a95ddee4d9bffb16d Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 14 Jul 2008 19:08:37 +0300 Subject: UBIFS: add new flash file system This is a new flash file system. See http://www.linux-mtd.infradead.org/doc/ubifs.html Signed-off-by: Artem Bityutskiy Signed-off-by: Adrian Hunter --- fs/ubifs/ubifs-media.h | 745 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 745 insertions(+) create mode 100644 fs/ubifs/ubifs-media.h (limited to 'fs/ubifs/ubifs-media.h') diff --git a/fs/ubifs/ubifs-media.h b/fs/ubifs/ubifs-media.h new file mode 100644 index 000000000000..0cc7da9bed47 --- /dev/null +++ b/fs/ubifs/ubifs-media.h @@ -0,0 +1,745 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Adrian Hunter + */ + +/* + * This file describes UBIFS on-flash format and contains definitions of all the + * relevant data structures and constants. + * + * All UBIFS on-flash objects are stored in the form of nodes. All nodes start + * with the UBIFS node magic number and have the same common header. Nodes + * always sit at 8-byte aligned positions on the media and node header sizes are + * also 8-byte aligned (except for the indexing node and the padding node). + */ + +#ifndef __UBIFS_MEDIA_H__ +#define __UBIFS_MEDIA_H__ + +/* UBIFS node magic number (must not have the padding byte first or last) */ +#define UBIFS_NODE_MAGIC 0x06101831 + +/* UBIFS on-flash format version */ +#define UBIFS_FORMAT_VERSION 4 + +/* Minimum logical eraseblock size in bytes */ +#define UBIFS_MIN_LEB_SZ (15*1024) + +/* Initial CRC32 value used when calculating CRC checksums */ +#define UBIFS_CRC32_INIT 0xFFFFFFFFU + +/* + * UBIFS does not try to compress data if its length is less than the below + * constant. + */ +#define UBIFS_MIN_COMPR_LEN 128 + +/* Root inode number */ +#define UBIFS_ROOT_INO 1 + +/* Lowest inode number used for regular inodes (not UBIFS-only internal ones) */ +#define UBIFS_FIRST_INO 64 + +/* + * Maximum file name and extended attribute length (must be a multiple of 8, + * minus 1). + */ +#define UBIFS_MAX_NLEN 255 + +/* Maximum number of data journal heads */ +#define UBIFS_MAX_JHEADS 1 + +/* + * Size of UBIFS data block. Note, UBIFS is not a block oriented file-system, + * which means that it does not treat the underlying media as consisting of + * blocks like in case of hard drives. Do not be confused. UBIFS block is just + * the maximum amount of data which one data node can have or which can be + * attached to an inode node. + */ +#define UBIFS_BLOCK_SIZE 4096 +#define UBIFS_BLOCK_SHIFT 12 +#define UBIFS_BLOCK_MASK 0x00000FFF + +/* UBIFS padding byte pattern (must not be first or last byte of node magic) */ +#define UBIFS_PADDING_BYTE 0xCE + +/* Maximum possible key length */ +#define UBIFS_MAX_KEY_LEN 16 + +/* Key length ("simple" format) */ +#define UBIFS_SK_LEN 8 + +/* Minimum index tree fanout */ +#define UBIFS_MIN_FANOUT 2 + +/* Maximum number of levels in UBIFS indexing B-tree */ +#define UBIFS_MAX_LEVELS 512 + +/* Maximum amount of data attached to an inode in bytes */ +#define UBIFS_MAX_INO_DATA UBIFS_BLOCK_SIZE + +/* LEB Properties Tree fanout (must be power of 2) and fanout shift */ +#define UBIFS_LPT_FANOUT 4 +#define UBIFS_LPT_FANOUT_SHIFT 2 + +/* LEB Properties Tree bit field sizes */ +#define UBIFS_LPT_CRC_BITS 16 +#define UBIFS_LPT_CRC_BYTES 2 +#define UBIFS_LPT_TYPE_BITS 4 + +/* The key is always at the same position in all keyed nodes */ +#define UBIFS_KEY_OFFSET offsetof(struct ubifs_ino_node, key) + +/* + * LEB Properties Tree node types. + * + * UBIFS_LPT_PNODE: LPT leaf node (contains LEB properties) + * UBIFS_LPT_NNODE: LPT internal node + * UBIFS_LPT_LTAB: LPT's own lprops table + * UBIFS_LPT_LSAVE: LPT's save table (big model only) + * UBIFS_LPT_NODE_CNT: count of LPT node types + * UBIFS_LPT_NOT_A_NODE: all ones (15 for 4 bits) is never a valid node type + */ +enum { + UBIFS_LPT_PNODE, + UBIFS_LPT_NNODE, + UBIFS_LPT_LTAB, + UBIFS_LPT_LSAVE, + UBIFS_LPT_NODE_CNT, + UBIFS_LPT_NOT_A_NODE = (1 << UBIFS_LPT_TYPE_BITS) - 1, +}; + +/* + * UBIFS inode types. + * + * UBIFS_ITYPE_REG: regular file + * UBIFS_ITYPE_DIR: directory + * UBIFS_ITYPE_LNK: soft link + * UBIFS_ITYPE_BLK: block device node + * UBIFS_ITYPE_CHR: character device node + * UBIFS_ITYPE_FIFO: fifo + * UBIFS_ITYPE_SOCK: socket + * UBIFS_ITYPES_CNT: count of supported file types + */ +enum { + UBIFS_ITYPE_REG, + UBIFS_ITYPE_DIR, + UBIFS_ITYPE_LNK, + UBIFS_ITYPE_BLK, + UBIFS_ITYPE_CHR, + UBIFS_ITYPE_FIFO, + UBIFS_ITYPE_SOCK, + UBIFS_ITYPES_CNT, +}; + +/* + * Supported key hash functions. + * + * UBIFS_KEY_HASH_R5: R5 hash + * UBIFS_KEY_HASH_TEST: test hash which just returns first 4 bytes of the name + */ +enum { + UBIFS_KEY_HASH_R5, + UBIFS_KEY_HASH_TEST, +}; + +/* + * Supported key formats. + * + * UBIFS_SIMPLE_KEY_FMT: simple key format + */ +enum { + UBIFS_SIMPLE_KEY_FMT, +}; + +/* + * The simple key format uses 29 bits for storing UBIFS block number and hash + * value. + */ +#define UBIFS_S_KEY_BLOCK_BITS 29 +#define UBIFS_S_KEY_BLOCK_MASK 0x1FFFFFFF +#define UBIFS_S_KEY_HASH_BITS UBIFS_S_KEY_BLOCK_BITS +#define UBIFS_S_KEY_HASH_MASK UBIFS_S_KEY_BLOCK_MASK + +/* + * Key types. + * + * UBIFS_INO_KEY: inode node key + * UBIFS_DATA_KEY: data node key + * UBIFS_DENT_KEY: directory entry node key + * UBIFS_XENT_KEY: extended attribute entry key + * UBIFS_KEY_TYPES_CNT: number of supported key types + */ +enum { + UBIFS_INO_KEY, + UBIFS_DATA_KEY, + UBIFS_DENT_KEY, + UBIFS_XENT_KEY, + UBIFS_KEY_TYPES_CNT, +}; + +/* Count of LEBs reserved for the superblock area */ +#define UBIFS_SB_LEBS 1 +/* Count of LEBs reserved for the master area */ +#define UBIFS_MST_LEBS 2 + +/* First LEB of the superblock area */ +#define UBIFS_SB_LNUM 0 +/* First LEB of the master area */ +#define UBIFS_MST_LNUM (UBIFS_SB_LNUM + UBIFS_SB_LEBS) +/* First LEB of the log area */ +#define UBIFS_LOG_LNUM (UBIFS_MST_LNUM + UBIFS_MST_LEBS) + +/* + * The below constants define the absolute minimum values for various UBIFS + * media areas. Many of them actually depend of flash geometry and the FS + * configuration (number of journal heads, orphan LEBs, etc). This means that + * the smallest volume size which can be used for UBIFS cannot be pre-defined + * by these constants. The file-system that meets the below limitation will not + * necessarily mount. UBIFS does run-time calculations and validates the FS + * size. + */ + +/* Minimum number of logical eraseblocks in the log */ +#define UBIFS_MIN_LOG_LEBS 2 +/* Minimum number of bud logical eraseblocks (one for each head) */ +#define UBIFS_MIN_BUD_LEBS 3 +/* Minimum number of journal logical eraseblocks */ +#define UBIFS_MIN_JNL_LEBS (UBIFS_MIN_LOG_LEBS + UBIFS_MIN_BUD_LEBS) +/* Minimum number of LPT area logical eraseblocks */ +#define UBIFS_MIN_LPT_LEBS 2 +/* Minimum number of orphan area logical eraseblocks */ +#define UBIFS_MIN_ORPH_LEBS 1 +/* + * Minimum number of main area logical eraseblocks (buds, 2 for the index, 1 + * for GC, 1 for deletions, and at least 1 for committed data). + */ +#define UBIFS_MIN_MAIN_LEBS (UBIFS_MIN_BUD_LEBS + 5) + +/* Minimum number of logical eraseblocks */ +#define UBIFS_MIN_LEB_CNT (UBIFS_SB_LEBS + UBIFS_MST_LEBS + \ + UBIFS_MIN_LOG_LEBS + UBIFS_MIN_LPT_LEBS + \ + UBIFS_MIN_ORPH_LEBS + UBIFS_MIN_MAIN_LEBS) + +/* Node sizes (N.B. these are guaranteed to be multiples of 8) */ +#define UBIFS_CH_SZ sizeof(struct ubifs_ch) +#define UBIFS_INO_NODE_SZ sizeof(struct ubifs_ino_node) +#define UBIFS_DATA_NODE_SZ sizeof(struct ubifs_data_node) +#define UBIFS_DENT_NODE_SZ sizeof(struct ubifs_dent_node) +#define UBIFS_TRUN_NODE_SZ sizeof(struct ubifs_trun_node) +#define UBIFS_PAD_NODE_SZ sizeof(struct ubifs_pad_node) +#define UBIFS_SB_NODE_SZ sizeof(struct ubifs_sb_node) +#define UBIFS_MST_NODE_SZ sizeof(struct ubifs_mst_node) +#define UBIFS_REF_NODE_SZ sizeof(struct ubifs_ref_node) +#define UBIFS_IDX_NODE_SZ sizeof(struct ubifs_idx_node) +#define UBIFS_CS_NODE_SZ sizeof(struct ubifs_cs_node) +#define UBIFS_ORPH_NODE_SZ sizeof(struct ubifs_orph_node) +/* Extended attribute entry nodes are identical to directory entry nodes */ +#define UBIFS_XENT_NODE_SZ UBIFS_DENT_NODE_SZ +/* Only this does not have to be multiple of 8 bytes */ +#define UBIFS_BRANCH_SZ sizeof(struct ubifs_branch) + +/* Maximum node sizes (N.B. these are guaranteed to be multiples of 8) */ +#define UBIFS_MAX_DATA_NODE_SZ (UBIFS_DATA_NODE_SZ + UBIFS_BLOCK_SIZE) +#define UBIFS_MAX_INO_NODE_SZ (UBIFS_INO_NODE_SZ + UBIFS_MAX_INO_DATA) +#define UBIFS_MAX_DENT_NODE_SZ (UBIFS_DENT_NODE_SZ + UBIFS_MAX_NLEN + 1) +#define UBIFS_MAX_XENT_NODE_SZ UBIFS_MAX_DENT_NODE_SZ + +/* The largest UBIFS node */ +#define UBIFS_MAX_NODE_SZ UBIFS_MAX_INO_NODE_SZ + +/* + * On-flash inode flags. + * + * UBIFS_COMPR_FL: use compression for this inode + * UBIFS_SYNC_FL: I/O on this inode has to be synchronous + * UBIFS_IMMUTABLE_FL: inode is immutable + * UBIFS_APPEND_FL: writes to the inode may only append data + * UBIFS_DIRSYNC_FL: I/O on this directory inode has to be synchronous + * UBIFS_XATTR_FL: this inode is the inode for an extended attribute value + * + * Note, these are on-flash flags which correspond to ioctl flags + * (@FS_COMPR_FL, etc). They have the same values now, but generally, do not + * have to be the same. + */ +enum { + UBIFS_COMPR_FL = 0x01, + UBIFS_SYNC_FL = 0x02, + UBIFS_IMMUTABLE_FL = 0x04, + UBIFS_APPEND_FL = 0x08, + UBIFS_DIRSYNC_FL = 0x10, + UBIFS_XATTR_FL = 0x20, +}; + +/* Inode flag bits used by UBIFS */ +#define UBIFS_FL_MASK 0x0000001F + +/* + * UBIFS compression algorithms. + * + * UBIFS_COMPR_NONE: no compression + * UBIFS_COMPR_LZO: LZO compression + * UBIFS_COMPR_ZLIB: ZLIB compression + * UBIFS_COMPR_TYPES_CNT: count of supported compression types + */ +enum { + UBIFS_COMPR_NONE, + UBIFS_COMPR_LZO, + UBIFS_COMPR_ZLIB, + UBIFS_COMPR_TYPES_CNT, +}; + +/* + * UBIFS node types. + * + * UBIFS_INO_NODE: inode node + * UBIFS_DATA_NODE: data node + * UBIFS_DENT_NODE: directory entry node + * UBIFS_XENT_NODE: extended attribute node + * UBIFS_TRUN_NODE: truncation node + * UBIFS_PAD_NODE: padding node + * UBIFS_SB_NODE: superblock node + * UBIFS_MST_NODE: master node + * UBIFS_REF_NODE: LEB reference node + * UBIFS_IDX_NODE: index node + * UBIFS_CS_NODE: commit start node + * UBIFS_ORPH_NODE: orphan node + * UBIFS_NODE_TYPES_CNT: count of supported node types + * + * Note, we index arrays by these numbers, so keep them low and contiguous. + * Node type constants for inodes, direntries and so on have to be the same as + * corresponding key type constants. + */ +enum { + UBIFS_INO_NODE, + UBIFS_DATA_NODE, + UBIFS_DENT_NODE, + UBIFS_XENT_NODE, + UBIFS_TRUN_NODE, + UBIFS_PAD_NODE, + UBIFS_SB_NODE, + UBIFS_MST_NODE, + UBIFS_REF_NODE, + UBIFS_IDX_NODE, + UBIFS_CS_NODE, + UBIFS_ORPH_NODE, + UBIFS_NODE_TYPES_CNT, +}; + +/* + * Master node flags. + * + * UBIFS_MST_DIRTY: rebooted uncleanly - master node is dirty + * UBIFS_MST_NO_ORPHS: no orphan inodes present + * UBIFS_MST_RCVRY: written by recovery + */ +enum { + UBIFS_MST_DIRTY = 1, + UBIFS_MST_NO_ORPHS = 2, + UBIFS_MST_RCVRY = 4, +}; + +/* + * Node group type (used by recovery to recover whole group or none). + * + * UBIFS_NO_NODE_GROUP: this node is not part of a group + * UBIFS_IN_NODE_GROUP: this node is a part of a group + * UBIFS_LAST_OF_NODE_GROUP: this node is the last in a group + */ +enum { + UBIFS_NO_NODE_GROUP = 0, + UBIFS_IN_NODE_GROUP, + UBIFS_LAST_OF_NODE_GROUP, +}; + +/* + * Superblock flags. + * + * UBIFS_FLG_BIGLPT: if "big" LPT model is used if set + */ +enum { + UBIFS_FLG_BIGLPT = 0x02, +}; + +/** + * struct ubifs_ch - common header node. + * @magic: UBIFS node magic number (%UBIFS_NODE_MAGIC) + * @crc: CRC-32 checksum of the node header + * @sqnum: sequence number + * @len: full node length + * @node_type: node type + * @group_type: node group type + * @padding: reserved for future, zeroes + * + * Every UBIFS node starts with this common part. If the node has a key, the + * key always goes next. + */ +struct ubifs_ch { + __le32 magic; + __le32 crc; + __le64 sqnum; + __le32 len; + __u8 node_type; + __u8 group_type; + __u8 padding[2]; +} __attribute__ ((packed)); + +/** + * union ubifs_dev_desc - device node descriptor. + * @new: new type device descriptor + * @huge: huge type device descriptor + * + * This data structure describes major/minor numbers of a device node. In an + * inode is a device node then its data contains an object of this type. UBIFS + * uses standard Linux "new" and "huge" device node encodings. + */ +union ubifs_dev_desc { + __le32 new; + __le64 huge; +} __attribute__ ((packed)); + +/** + * struct ubifs_ino_node - inode node. + * @ch: common header + * @key: node key + * @creat_sqnum: sequence number at time of creation + * @size: inode size in bytes (amount of uncompressed data) + * @atime_sec: access time seconds + * @ctime_sec: creation time seconds + * @mtime_sec: modification time seconds + * @atime_nsec: access time nanoseconds + * @ctime_nsec: creation time nanoseconds + * @mtime_nsec: modification time nanoseconds + * @nlink: number of hard links + * @uid: owner ID + * @gid: group ID + * @mode: access flags + * @flags: per-inode flags (%UBIFS_COMPR_FL, %UBIFS_SYNC_FL, etc) + * @data_len: inode data length + * @xattr_cnt: count of extended attributes this inode has + * @xattr_size: summarized size of all extended attributes in bytes + * @padding1: reserved for future, zeroes + * @xattr_names: sum of lengths of all extended attribute names belonging to + * this inode + * @compr_type: compression type used for this inode + * @padding2: reserved for future, zeroes + * @data: data attached to the inode + * + * Note, even though inode compression type is defined by @compr_type, some + * nodes of this inode may be compressed with different compressor - this + * happens if compression type is changed while the inode already has data + * nodes. But @compr_type will be use for further writes to the inode. + * + * Note, do not forget to amend 'zero_ino_node_unused()' function when changing + * the padding fields. + */ +struct ubifs_ino_node { + struct ubifs_ch ch; + __u8 key[UBIFS_MAX_KEY_LEN]; + __le64 creat_sqnum; + __le64 size; + __le64 atime_sec; + __le64 ctime_sec; + __le64 mtime_sec; + __le32 atime_nsec; + __le32 ctime_nsec; + __le32 mtime_nsec; + __le32 nlink; + __le32 uid; + __le32 gid; + __le32 mode; + __le32 flags; + __le32 data_len; + __le32 xattr_cnt; + __le32 xattr_size; + __u8 padding1[4]; /* Watch 'zero_ino_node_unused()' if changing! */ + __le32 xattr_names; + __le16 compr_type; + __u8 padding2[26]; /* Watch 'zero_ino_node_unused()' if changing! */ + __u8 data[]; +} __attribute__ ((packed)); + +/** + * struct ubifs_dent_node - directory entry node. + * @ch: common header + * @key: node key + * @inum: target inode number + * @padding1: reserved for future, zeroes + * @type: type of the target inode (%UBIFS_ITYPE_REG, %UBIFS_ITYPE_DIR, etc) + * @nlen: name length + * @padding2: reserved for future, zeroes + * @name: zero-terminated name + * + * Note, do not forget to amend 'zero_dent_node_unused()' function when + * changing the padding fields. + */ +struct ubifs_dent_node { + struct ubifs_ch ch; + __u8 key[UBIFS_MAX_KEY_LEN]; + __le64 inum; + __u8 padding1; + __u8 type; + __le16 nlen; + __u8 padding2[4]; /* Watch 'zero_dent_node_unused()' if changing! */ + __u8 name[]; +} __attribute__ ((packed)); + +/** + * struct ubifs_data_node - data node. + * @ch: common header + * @key: node key + * @size: uncompressed data size in bytes + * @compr_type: compression type (%UBIFS_COMPR_NONE, %UBIFS_COMPR_LZO, etc) + * @padding: reserved for future, zeroes + * @data: data + * + * Note, do not forget to amend 'zero_data_node_unused()' function when + * changing the padding fields. + */ +struct ubifs_data_node { + struct ubifs_ch ch; + __u8 key[UBIFS_MAX_KEY_LEN]; + __le32 size; + __le16 compr_type; + __u8 padding[2]; /* Watch 'zero_data_node_unused()' if changing! */ + __u8 data[]; +} __attribute__ ((packed)); + +/** + * struct ubifs_trun_node - truncation node. + * @ch: common header + * @inum: truncated inode number + * @padding: reserved for future, zeroes + * @old_size: size before truncation + * @new_size: size after truncation + * + * This node exists only in the journal and never goes to the main area. Note, + * do not forget to amend 'zero_trun_node_unused()' function when changing the + * padding fields. + */ +struct ubifs_trun_node { + struct ubifs_ch ch; + __le32 inum; + __u8 padding[12]; /* Watch 'zero_trun_node_unused()' if changing! */ + __le64 old_size; + __le64 new_size; +} __attribute__ ((packed)); + +/** + * struct ubifs_pad_node - padding node. + * @ch: common header + * @pad_len: how many bytes after this node are unused (because padded) + * @padding: reserved for future, zeroes + */ +struct ubifs_pad_node { + struct ubifs_ch ch; + __le32 pad_len; +} __attribute__ ((packed)); + +/** + * struct ubifs_sb_node - superblock node. + * @ch: common header + * @padding: reserved for future, zeroes + * @key_hash: type of hash function used in keys + * @key_fmt: format of the key + * @flags: file-system flags (%UBIFS_FLG_BIGLPT, etc) + * @min_io_size: minimal input/output unit size + * @leb_size: logical eraseblock size in bytes + * @leb_cnt: count of LEBs used by file-system + * @max_leb_cnt: maximum count of LEBs used by file-system + * @max_bud_bytes: maximum amount of data stored in buds + * @log_lebs: log size in logical eraseblocks + * @lpt_lebs: number of LEBs used for lprops table + * @orph_lebs: number of LEBs used for recording orphans + * @jhead_cnt: count of journal heads + * @fanout: tree fanout (max. number of links per indexing node) + * @lsave_cnt: number of LEB numbers in LPT's save table + * @fmt_version: UBIFS on-flash format version + * @default_compr: default compression algorithm (%UBIFS_COMPR_LZO, etc) + * @padding1: reserved for future, zeroes + * @rp_uid: reserve pool UID + * @rp_gid: reserve pool GID + * @rp_size: size of the reserved pool in bytes + * @padding2: reserved for future, zeroes + * @time_gran: time granularity in nanoseconds + * @uuid: UUID generated when the file system image was created + */ +struct ubifs_sb_node { + struct ubifs_ch ch; + __u8 padding[2]; + __u8 key_hash; + __u8 key_fmt; + __le32 flags; + __le32 min_io_size; + __le32 leb_size; + __le32 leb_cnt; + __le32 max_leb_cnt; + __le64 max_bud_bytes; + __le32 log_lebs; + __le32 lpt_lebs; + __le32 orph_lebs; + __le32 jhead_cnt; + __le32 fanout; + __le32 lsave_cnt; + __le32 fmt_version; + __le16 default_compr; + __u8 padding1[2]; + __le32 rp_uid; + __le32 rp_gid; + __le64 rp_size; + __le32 time_gran; + __u8 uuid[16]; + __u8 padding2[3972]; +} __attribute__ ((packed)); + +/** + * struct ubifs_mst_node - master node. + * @ch: common header + * @highest_inum: highest inode number in the committed index + * @cmt_no: commit number + * @flags: various flags (%UBIFS_MST_DIRTY, etc) + * @log_lnum: start of the log + * @root_lnum: LEB number of the root indexing node + * @root_offs: offset within @root_lnum + * @root_len: root indexing node length + * @gc_lnum: LEB reserved for garbage collection (%-1 value means the LEB was + * not reserved and should be reserved on mount) + * @ihead_lnum: LEB number of index head + * @ihead_offs: offset of index head + * @index_size: size of index on flash + * @total_free: total free space in bytes + * @total_dirty: total dirty space in bytes + * @total_used: total used space in bytes (includes only data LEBs) + * @total_dead: total dead space in bytes (includes only data LEBs) + * @total_dark: total dark space in bytes (includes only data LEBs) + * @lpt_lnum: LEB number of LPT root nnode + * @lpt_offs: offset of LPT root nnode + * @nhead_lnum: LEB number of LPT head + * @nhead_offs: offset of LPT head + * @ltab_lnum: LEB number of LPT's own lprops table + * @ltab_offs: offset of LPT's own lprops table + * @lsave_lnum: LEB number of LPT's save table (big model only) + * @lsave_offs: offset of LPT's save table (big model only) + * @lscan_lnum: LEB number of last LPT scan + * @empty_lebs: number of empty logical eraseblocks + * @idx_lebs: number of indexing logical eraseblocks + * @leb_cnt: count of LEBs used by file-system + * @padding: reserved for future, zeroes + */ +struct ubifs_mst_node { + struct ubifs_ch ch; + __le64 highest_inum; + __le64 cmt_no; + __le32 flags; + __le32 log_lnum; + __le32 root_lnum; + __le32 root_offs; + __le32 root_len; + __le32 gc_lnum; + __le32 ihead_lnum; + __le32 ihead_offs; + __le64 index_size; + __le64 total_free; + __le64 total_dirty; + __le64 total_used; + __le64 total_dead; + __le64 total_dark; + __le32 lpt_lnum; + __le32 lpt_offs; + __le32 nhead_lnum; + __le32 nhead_offs; + __le32 ltab_lnum; + __le32 ltab_offs; + __le32 lsave_lnum; + __le32 lsave_offs; + __le32 lscan_lnum; + __le32 empty_lebs; + __le32 idx_lebs; + __le32 leb_cnt; + __u8 padding[344]; +} __attribute__ ((packed)); + +/** + * struct ubifs_ref_node - logical eraseblock reference node. + * @ch: common header + * @lnum: the referred logical eraseblock number + * @offs: start offset in the referred LEB + * @jhead: journal head number + * @padding: reserved for future, zeroes + */ +struct ubifs_ref_node { + struct ubifs_ch ch; + __le32 lnum; + __le32 offs; + __le32 jhead; + __u8 padding[28]; +} __attribute__ ((packed)); + +/** + * struct ubifs_branch - key/reference/length branch + * @lnum: LEB number of the target node + * @offs: offset within @lnum + * @len: target node length + * @key: key + */ +struct ubifs_branch { + __le32 lnum; + __le32 offs; + __le32 len; + __u8 key[]; +} __attribute__ ((packed)); + +/** + * struct ubifs_idx_node - indexing node. + * @ch: common header + * @child_cnt: number of child index nodes + * @level: tree level + * @branches: LEB number / offset / length / key branches + */ +struct ubifs_idx_node { + struct ubifs_ch ch; + __le16 child_cnt; + __le16 level; + __u8 branches[]; +} __attribute__ ((packed)); + +/** + * struct ubifs_cs_node - commit start node. + * @ch: common header + * @cmt_no: commit number + */ +struct ubifs_cs_node { + struct ubifs_ch ch; + __le64 cmt_no; +} __attribute__ ((packed)); + +/** + * struct ubifs_orph_node - orphan node. + * @ch: common header + * @cmt_no: commit number (also top bit is set on the last node of the commit) + * @inos: inode numbers of orphans + */ +struct ubifs_orph_node { + struct ubifs_ch ch; + __le64 cmt_no; + __le64 inos[]; +} __attribute__ ((packed)); + +#endif /* __UBIFS_MEDIA_H__ */ -- cgit v1.2.2