From c3d833685583f943fb0b5511a9e4602becb1668b Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 16 May 2006 06:38:29 +0200 Subject: [SCSI] Blacklist entry for HP dat changer after upgrading our SUN E250 from 2.4 to 2.6 I'm seeing following error when the HP DDS4 DAT changer gets probed: scsi: host 1 channel 0 id 5 lun16777216 has a LUN larger than allowed by the host adapter The device is connected to a symbios 875 host. I've talked to Willy about the problem, and he asked me to try to blacklist the device for reportlun. I did that with the patch below and it solved the problem. It now gets properly detected: target1:0:5: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16) Vendor: HP Model: C5713A Rev: H307 Type: Sequential-Access ANSI SCSI revision: 03 target1:0:5: Beginning Domain Validation target1:0:5: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16) target1:0:5: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16) target1:0:5: Domain Validation skipping write tests target1:0:5: Ending Domain Validation Vendor: HP Model: C5713A Rev: H307 Type: Medium Changer ANSI SCSI revision: 03 Signed-off-by: tsbogend@alpha.franken.de Signed-off-by: James Bottomley --- drivers/scsi/scsi_devinfo.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index 941c1e15c899..62f8cb7b3d2b 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -165,6 +165,7 @@ static struct { {"HP", "HSV100", NULL, BLIST_REPORTLUN2 | BLIST_NOSTARTONADD}, {"HP", "C1557A", NULL, BLIST_FORCELUN}, {"HP", "C3323-300", "4269", BLIST_NOTQ}, + {"HP", "C5713A", NULL, BLIST_NOREPORTLUN}, {"IBM", "AuSaV1S2", NULL, BLIST_FORCELUN}, {"IBM", "ProFibre 4000R", "*", BLIST_SPARSELUN | BLIST_LARGELUN}, {"IBM", "2105", NULL, BLIST_RETRY_HWERROR}, -- cgit v1.2.2 From 4ff42a669a9ad3eb8274da31c7baabd968c2d365 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Wed, 17 May 2006 18:06:52 -0500 Subject: [SCSI] mptspi: reset handler shouldn't be called for other bus protocols All registered reset callback handlers are called during reset processing. The mptspi modules has its own reset callback handler, just recently added for issuing domain validation after host reset. If either the mptsas or mptfc driver are loaded, this callback could be called. Thus resulting in domain validation being issued for sas or fibre end devices. Fix this by having mptbase.c check the bus type against the driver type and only call the reset handler if they match (or if it's a non-bus specific reset handler). Signed-off-by: James Bottomley --- drivers/message/fusion/mptbase.c | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 9080853fe283..a30084076ac8 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -1605,6 +1605,21 @@ mpt_resume(struct pci_dev *pdev) } #endif +static int +mpt_signal_reset(int index, MPT_ADAPTER *ioc, int reset_phase) +{ + if ((MptDriverClass[index] == MPTSPI_DRIVER && + ioc->bus_type != SPI) || + (MptDriverClass[index] == MPTFC_DRIVER && + ioc->bus_type != FC) || + (MptDriverClass[index] == MPTSAS_DRIVER && + ioc->bus_type != SAS)) + /* make sure we only call the relevant reset handler + * for the bus */ + return 0; + return (MptResetHandlers[index])(ioc, reset_phase); +} + /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * mpt_do_ioc_recovery - Initialize or recover MPT adapter. @@ -1885,14 +1900,14 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) if ((ret == 0) && MptResetHandlers[ii]) { dprintk((MYIOC_s_INFO_FMT "Calling IOC post_reset handler #%d\n", ioc->name, ii)); - rc += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_POST_RESET); + rc += mpt_signal_reset(ii, ioc, MPT_IOC_POST_RESET); handlers++; } if (alt_ioc_ready && MptResetHandlers[ii]) { drsprintk((MYIOC_s_INFO_FMT "Calling alt-%s post_reset handler #%d\n", ioc->name, ioc->alt_ioc->name, ii)); - rc += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_POST_RESET); + rc += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_POST_RESET); handlers++; } } @@ -3267,11 +3282,11 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) if (MptResetHandlers[ii]) { dprintk((MYIOC_s_INFO_FMT "Calling IOC pre_reset handler #%d\n", ioc->name, ii)); - r += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_PRE_RESET); + r += mpt_signal_reset(ii, ioc, MPT_IOC_PRE_RESET); if (ioc->alt_ioc) { dprintk((MYIOC_s_INFO_FMT "Calling alt-%s pre_reset handler #%d\n", ioc->name, ioc->alt_ioc->name, ii)); - r += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_PRE_RESET); + r += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_PRE_RESET); } } } @@ -5706,11 +5721,11 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag) if (MptResetHandlers[ii]) { dtmprintk((MYIOC_s_INFO_FMT "Calling IOC reset_setup handler #%d\n", ioc->name, ii)); - r += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_SETUP_RESET); + r += mpt_signal_reset(ii, ioc, MPT_IOC_SETUP_RESET); if (ioc->alt_ioc) { dtmprintk((MYIOC_s_INFO_FMT "Calling alt-%s setup reset handler #%d\n", ioc->name, ioc->alt_ioc->name, ii)); - r += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_SETUP_RESET); + r += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_SETUP_RESET); } } } -- cgit v1.2.2 From 78a904b65420e02bf964af6a83c1fd7a85e0b59d Mon Sep 17 00:00:00 2001 From: "Randy.Dunlap" Date: Fri, 19 May 2006 10:11:02 -0700 Subject: [SCSI] ppa: fix for machines with highmem ppa cannot handle highmem pages, and like imm, which already has this patch, the device is slow, so performance is not a big issue, so just force pages to be in low memory (hence mapped). Signed-off-by: Randy Dunlap Signed-off-by: James Bottomley --- drivers/scsi/ppa.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/ppa.c b/drivers/scsi/ppa.c index fee843fab1c7..108910f512e4 100644 --- a/drivers/scsi/ppa.c +++ b/drivers/scsi/ppa.c @@ -982,6 +982,12 @@ static int device_check(ppa_struct *dev) return -ENODEV; } +static int ppa_adjust_queue(struct scsi_device *device) +{ + blk_queue_bounce_limit(device->request_queue, BLK_BOUNCE_HIGH); + return 0; +} + static struct scsi_host_template ppa_template = { .module = THIS_MODULE, .proc_name = "ppa", @@ -997,6 +1003,7 @@ static struct scsi_host_template ppa_template = { .cmd_per_lun = 1, .use_clustering = ENABLE_CLUSTERING, .can_queue = 1, + .slave_alloc = ppa_adjust_queue, }; /*************************************************************************** -- cgit v1.2.2 From 6d99a3f372181160a56d7b1ee3259dbe03663f0d Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 19 May 2006 10:49:37 -0500 Subject: [SCSI] scsi_transport_sas; fix user_scan the user_scan() callback currently has the potential to identify the wrong device in the presence of expanders. This is because it finds the first device with a matching target_id, which might be an expander. Fix this by making it look specifically for end devices. Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_sas.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index 8b6d65e21bae..8126c395de16 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -955,7 +955,8 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel, list_for_each_entry(rphy, &sas_host->rphy_list, list) { struct sas_phy *parent = dev_to_phy(rphy->dev.parent); - if (rphy->scsi_target_id == -1) + if (rphy->identify.device_type != SAS_END_DEVICE || + rphy->scsi_target_id == -1) continue; if ((channel == SCAN_WILD_CARD || channel == parent->port_identifier) && -- cgit v1.2.2 From 9f434d4f84a235f6b61aec6e691d6b07bc46fc24 Mon Sep 17 00:00:00 2001 From: Eric Moore Date: Wed, 17 May 2006 18:19:43 -0600 Subject: [SCSI] scsi_transport_sas: make write attrs writeable A couple write attributes in sas transport layer have a small bug that prevents them from being written to. Those attributes are the link_reset and write_reset. This is due the store field being set to NULL. Signed-off-by: Eric Moore Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_sas.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index 8126c395de16..f3b16066387c 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -978,7 +978,6 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel, #define SETUP_TEMPLATE(attrb, field, perm, test) \ i->private_##attrb[count] = class_device_attr_##field; \ i->private_##attrb[count].attr.mode = perm; \ - i->private_##attrb[count].store = NULL; \ i->attrb[count] = &i->private_##attrb[count]; \ if (test) \ count++ -- cgit v1.2.2 From 283a12c53b9abeed89491da4a1eda98f5764947b Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 28 Mar 2006 09:38:45 +0200 Subject: [AGPGART] Enable SIS AGP driver on x86-64 for EM64T systems Enable SIS AGP driver on x86-64 for EM64T systems Untested so far Signed-off-by: Andi Kleen Signed-off-by: Dave Jones --- drivers/char/agp/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig index 0b9cf9c59a21..7c88c060a9e6 100644 --- a/drivers/char/agp/Kconfig +++ b/drivers/char/agp/Kconfig @@ -86,7 +86,7 @@ config AGP_NVIDIA config AGP_SIS tristate "SiS chipset support" - depends on AGP && X86_32 + depends on AGP help This option gives you AGP support for the GLX component of X on Silicon Integrated Systems [SiS] chipsets. -- cgit v1.2.2 From ca2797ffaabc1f73cf8a73a30f709f0c1a6bef34 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sun, 21 May 2006 17:11:42 -0400 Subject: [AGPGART] Fix Nforce3 suspend on amd64. kernel.org bugzilla #6206 Based on patch from Serge Belyshev Signed-off-by: Dave Jones --- drivers/char/agp/amd64-agp.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 36517d4d1ad9..ac3c33a2e37d 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -617,6 +617,9 @@ static int agp_amd64_resume(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); + if (pdev->vendor == PCI_VENDOR_ID_NVIDIA) + nforce3_agp_init(pdev); + return amd_8151_configure(); } -- cgit v1.2.2 From 7dd1d9b85cfb63eebf48fa13d3c5d25a3deb3a25 Mon Sep 17 00:00:00 2001 From: Magnus Kessler Date: Mon, 22 May 2006 10:53:10 +0100 Subject: [AGPGART] VIA PT880 Ultra support. This patch enables agpgart on a Via "PT880 Ultra" based motherboard (Asus P4V800D-X). The PCI ID of the PT880 Ultra is 0x0308 instead of 0x0258 of the PT880. The patched via-agp passes testgart. Signed-off-by: Magnus Kessler Signed-off-by: Dave Jones --- drivers/char/agp/via-agp.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/char/agp/via-agp.c b/drivers/char/agp/via-agp.c index 97b0a890ba7f..b8ec25d17478 100644 --- a/drivers/char/agp/via-agp.c +++ b/drivers/char/agp/via-agp.c @@ -345,6 +345,12 @@ static struct agp_device_ids via_agp_device_ids[] __devinitdata = .chipset_name = "PT880", }, + /* PT880 Ultra */ + { + .device_id = PCI_DEVICE_ID_VIA_PT880ULTRA, + .chipset_name = "PT880 Ultra", + }, + /* PT890 */ { .device_id = PCI_DEVICE_ID_VIA_8783_0, @@ -511,6 +517,7 @@ static struct pci_device_id agp_via_pci_table[] = { ID(PCI_DEVICE_ID_VIA_8763_0), ID(PCI_DEVICE_ID_VIA_8378_0), ID(PCI_DEVICE_ID_VIA_PT880), + ID(PCI_DEVICE_ID_VIA_PT880ULTRA), ID(PCI_DEVICE_ID_VIA_8783_0), ID(PCI_DEVICE_ID_VIA_PX8X0_0), ID(PCI_DEVICE_ID_VIA_3269_0), -- cgit v1.2.2 From 7363cfc8666692a5263c646e68e54900b536cd7e Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 29 May 2006 23:28:05 -0400 Subject: Input: sidewinder - fix memory leak In sw_connect we leak 'buf' and 'idbuf' when we do not leave via one of the fail* labels. This was spotted by the coverity checker. Patch is compile tested only due to lack of hardware. Signed-off-by: Jesper Juhl Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/sidewinder.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/input/joystick/sidewinder.c b/drivers/input/joystick/sidewinder.c index 2b2ec1057dee..95c0de7964a0 100644 --- a/drivers/input/joystick/sidewinder.c +++ b/drivers/input/joystick/sidewinder.c @@ -589,7 +589,7 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv) struct sw *sw; struct input_dev *input_dev; int i, j, k, l; - int err; + int err = 0; unsigned char *buf = NULL; /* [SW_LENGTH] */ unsigned char *idbuf = NULL; /* [SW_LENGTH] */ unsigned char m = 1; @@ -776,7 +776,10 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv) goto fail4; } - return 0; + out: kfree(buf); + kfree(idbuf); + + return err; fail4: input_free_device(sw->dev[i]); fail3: while (--i >= 0) @@ -784,9 +787,7 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv) fail2: gameport_close(gameport); fail1: gameport_set_drvdata(gameport, NULL); kfree(sw); - kfree(buf); - kfree(idbuf); - return err; + goto out; } static void sw_disconnect(struct gameport *gameport) -- cgit v1.2.2 From 4f8b05efec7a56221c6d1b0e20bcf19671017065 Mon Sep 17 00:00:00 2001 From: Zbigniew Luszpinski Date: Mon, 29 May 2006 23:29:19 -0400 Subject: Input: psmouse - add detection of Logitech TrackMan Wheel trackball Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/logips2pp.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c index 40333d61093c..2f0d28840810 100644 --- a/drivers/input/mouse/logips2pp.c +++ b/drivers/input/mouse/logips2pp.c @@ -19,6 +19,7 @@ #define PS2PP_KIND_WHEEL 1 #define PS2PP_KIND_MX 2 #define PS2PP_KIND_TP3 3 +#define PS2PP_KIND_TRACKMAN 4 /* Logitech mouse features */ #define PS2PP_WHEEL 0x01 @@ -223,6 +224,7 @@ static struct ps2pp_info *get_model_info(unsigned char model) { 73, 0, PS2PP_SIDE_BTN }, { 75, PS2PP_KIND_WHEEL, PS2PP_WHEEL }, { 76, PS2PP_KIND_WHEEL, PS2PP_WHEEL }, + { 79, PS2PP_KIND_TRACKMAN, PS2PP_WHEEL }, /* TrackMan with wheel */ { 80, PS2PP_KIND_WHEEL, PS2PP_SIDE_BTN | PS2PP_WHEEL }, { 81, PS2PP_KIND_WHEEL, PS2PP_WHEEL }, { 83, PS2PP_KIND_WHEEL, PS2PP_WHEEL }, @@ -298,6 +300,10 @@ static void ps2pp_set_model_properties(struct psmouse *psmouse, struct ps2pp_inf psmouse->name = "TouchPad 3"; break; + case PS2PP_KIND_TRACKMAN: + psmouse->name = "TrackMan"; + break; + default: /* * Set name to "Mouse" only when using PS2++, -- cgit v1.2.2 From e107b8ee7e97fc20695ca3d5ef862511eca28df0 Mon Sep 17 00:00:00 2001 From: "masc@theaterzentrum.at" Date: Mon, 29 May 2006 23:29:36 -0400 Subject: Input: wistron - add support for AOpen Barebook 1559as Signed-off-by: Dmitry Torokhov --- drivers/input/misc/wistron_btns.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers') diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c index 36cd2e07fce8..e4e5be111c96 100644 --- a/drivers/input/misc/wistron_btns.c +++ b/drivers/input/misc/wistron_btns.c @@ -318,6 +318,16 @@ static struct key_entry keymap_acer_travelmate_240[] = { { KE_END, 0 } }; +static struct key_entry keymap_aopen_1559as[] = { + { KE_KEY, 0x01, KEY_HELP }, + { KE_KEY, 0x06, KEY_PROG3 }, + { KE_KEY, 0x11, KEY_PROG1 }, + { KE_KEY, 0x12, KEY_PROG2 }, + { KE_WIFI, 0x30, 0 }, + { KE_KEY, 0x31, KEY_MAIL }, + { KE_KEY, 0x36, KEY_WWW }, +}; + /* * If your machine is not here (which is currently rather likely), please send * a list of buttons and their key codes (reported when loading this module @@ -369,6 +379,15 @@ static struct dmi_system_id dmi_ids[] = { }, .driver_data = keymap_acer_travelmate_240 }, + { + .callback = dmi_matched, + .ident = "AOpen 1559AS", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "E2U"), + DMI_MATCH(DMI_BOARD_NAME, "E2U"), + }, + .driver_data = keymap_aopen_1559as + }, { NULL, } }; -- cgit v1.2.2 From d2f4012f15845761bd3c6f90172e53767c11e359 Mon Sep 17 00:00:00 2001 From: Yotam Medini Date: Mon, 29 May 2006 23:30:36 -0400 Subject: Input: alps - fix old protocol decoding Correct touchpad left & right keys assignments for ALPS_OLDPROTO that were swapped. Old protocol is used on UMAX ActionBook-530T notebook. Signed-off-by: Yotam Medini Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/alps.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 2141501e9f2e..a0e2e797c6d5 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -100,8 +100,8 @@ static void alps_process_packet(struct psmouse *psmouse, struct pt_regs *regs) } if (priv->i->flags & ALPS_OLDPROTO) { - left = packet[2] & 0x08; - right = packet[2] & 0x10; + left = packet[2] & 0x10; + right = packet[2] & 0x08; middle = 0; x = packet[1] | ((packet[0] & 0x07) << 7); y = packet[4] | ((packet[3] & 0x07) << 7); -- cgit v1.2.2 From ed8f9e2f047de5d9b791e390269f230a101a6a4b Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Mon, 29 May 2006 23:31:03 -0400 Subject: Input: change from numbered to named switches Remove the numbered SW_* entries from the input system and assign names to the existing users. Signed-off-by: Richard Purdie Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/corgikbd.c | 12 ++++++------ drivers/input/keyboard/spitzkbd.c | 12 ++++++------ 2 files changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c index 96c6bf77248a..1f0e720267d7 100644 --- a/drivers/input/keyboard/corgikbd.c +++ b/drivers/input/keyboard/corgikbd.c @@ -245,9 +245,9 @@ static void corgikbd_hinge_timer(unsigned long data) if (hinge_count >= HINGE_STABLE_COUNT) { spin_lock_irqsave(&corgikbd_data->lock, flags); - input_report_switch(corgikbd_data->input, SW_0, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0)); - input_report_switch(corgikbd_data->input, SW_1, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0)); - input_report_switch(corgikbd_data->input, SW_2, (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0)); + input_report_switch(corgikbd_data->input, SW_LID, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0)); + input_report_switch(corgikbd_data->input, SW_TABLET_MODE, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0)); + input_report_switch(corgikbd_data->input, SW_HEADPHONE_INSERT, (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0)); input_sync(corgikbd_data->input); spin_unlock_irqrestore(&corgikbd_data->lock, flags); @@ -340,9 +340,9 @@ static int __init corgikbd_probe(struct platform_device *pdev) for (i = 0; i < ARRAY_SIZE(corgikbd_keycode); i++) set_bit(corgikbd->keycode[i], input_dev->keybit); clear_bit(0, input_dev->keybit); - set_bit(SW_0, input_dev->swbit); - set_bit(SW_1, input_dev->swbit); - set_bit(SW_2, input_dev->swbit); + set_bit(SW_LID, input_dev->swbit); + set_bit(SW_TABLET_MODE, input_dev->swbit); + set_bit(SW_HEADPHONE_INSERT, input_dev->swbit); input_register_device(corgikbd->input); diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c index 1d238a9d52d6..c5d03fb77bcb 100644 --- a/drivers/input/keyboard/spitzkbd.c +++ b/drivers/input/keyboard/spitzkbd.c @@ -299,9 +299,9 @@ static void spitzkbd_hinge_timer(unsigned long data) if (hinge_count >= HINGE_STABLE_COUNT) { spin_lock_irqsave(&spitzkbd_data->lock, flags); - input_report_switch(spitzkbd_data->input, SW_0, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0)); - input_report_switch(spitzkbd_data->input, SW_1, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0)); - input_report_switch(spitzkbd_data->input, SW_2, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0)); + input_report_switch(spitzkbd_data->input, SW_LID, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0)); + input_report_switch(spitzkbd_data->input, SW_TABLET_MODE, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0)); + input_report_switch(spitzkbd_data->input, SW_HEADPHONE_INSERT, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0)); input_sync(spitzkbd_data->input); spin_unlock_irqrestore(&spitzkbd_data->lock, flags); @@ -398,9 +398,9 @@ static int __init spitzkbd_probe(struct platform_device *dev) for (i = 0; i < ARRAY_SIZE(spitzkbd_keycode); i++) set_bit(spitzkbd->keycode[i], input_dev->keybit); clear_bit(0, input_dev->keybit); - set_bit(SW_0, input_dev->swbit); - set_bit(SW_1, input_dev->swbit); - set_bit(SW_2, input_dev->swbit); + set_bit(SW_LID, input_dev->swbit); + set_bit(SW_TABLET_MODE, input_dev->swbit); + set_bit(SW_HEADPHONE_INSERT, input_dev->swbit); input_register_device(input_dev); -- cgit v1.2.2 From 47ce56edb8ecdd4ec2bbec4e8683f3ba91de72e3 Mon Sep 17 00:00:00 2001 From: Kenan Esau Date: Mon, 29 May 2006 23:31:12 -0400 Subject: Input: psmouse - DMI updates for lifebook protocol Added different lifebook-versions and the CF-18 to the corresponding dmi-table. Signed-off-by: Kenan Esau Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/lifebook.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'drivers') diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index 5ccc3ef3b89e..c14395ba7980 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -21,12 +21,36 @@ #include "lifebook.h" static struct dmi_system_id lifebook_dmi_table[] = { + { + .ident = "LifeBook B", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B Series"), + }, + }, { .ident = "Lifebook B", .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK B Series"), }, }, + { + .ident = "Lifebook B213x/B2150", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B2131/B2133/B2150"), + }, + }, + { + .ident = "Zephyr", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "ZEPHYR"), + }, + }, + { + .ident = "CF-18", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "CF-18"), + }, + }, { .ident = "Lifebook B142", .matches = { -- cgit v1.2.2 From 308af9290ad1844c1b4e93ff4919f8009efbe018 Mon Sep 17 00:00:00 2001 From: David Hollister Date: Tue, 30 May 2006 21:25:36 -0700 Subject: [PATCH] fbcon: fix scrollback with logo issue immediately after boot From: David Hollister After the system boots with the logo, if the first action is a scrollback, the screen may become garbled. This patch ensures that the softback_curr value is updated along with softback_in following the scrollback. Signed-off-by: David Hollister Signed-off-by: Jordan Crouse Cc: "Antonino A. Daplas" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/console/fbcon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index ca020719d20b..953eb8c171d6 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -2631,7 +2631,7 @@ static int fbcon_scrolldelta(struct vc_data *vc, int lines) scr_memcpyw((u16 *) q, (u16 *) p, vc->vc_size_row); } - softback_in = p; + softback_in = softback_curr = p; update_region(vc, vc->vc_origin, logo_lines * vc->vc_cols); } -- cgit v1.2.2 From de66a695bef17264b2472c06e981c068bfa0636e Mon Sep 17 00:00:00 2001 From: Seiji Munetoh Date: Tue, 30 May 2006 21:25:47 -0700 Subject: [PATCH] tpm: bios log parsing fixes From: Seiji Munetoh Fix "tcpa_pc_event" misalignment between enum, strings and TCG PC spec and output of the event which contains a hash data. Signed-off-by: Seiji Munetoh Acked-by: Kylene Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm_bios.c | 41 +++++++++++++++++++++++++---------------- 1 file changed, 25 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c index e45f0d3d12de..60380174f245 100644 --- a/drivers/char/tpm/tpm_bios.c +++ b/drivers/char/tpm/tpm_bios.c @@ -105,6 +105,12 @@ static const char* tcpa_event_type_strings[] = { "Non-Host Info" }; +struct tcpa_pc_event { + u32 event_id; + u32 event_size; + u8 event_data[0]; +}; + enum tcpa_pc_event_ids { SMBIOS = 1, BIS_CERT, @@ -114,14 +120,15 @@ enum tcpa_pc_event_ids { NVRAM, OPTION_ROM_EXEC, OPTION_ROM_CONFIG, - OPTION_ROM_MICROCODE, + OPTION_ROM_MICROCODE = 10, S_CRTM_VERSION, S_CRTM_CONTENTS, POST_CONTENTS, + HOST_TABLE_OF_DEVICES, }; static const char* tcpa_pc_event_id_strings[] = { - "" + "", "SMBIOS", "BIS Certificate", "POST BIOS ", @@ -130,11 +137,12 @@ static const char* tcpa_pc_event_id_strings[] = { "NVRAM", "Option ROM", "Option ROM config", - "Option ROM microcode", + "", + "Option ROM microcode ", "S-CRTM Version", - "S-CRTM Contents", - "S-CRTM POST Contents", - "POST Contents", + "S-CRTM Contents ", + "POST Contents ", + "Table of Devices", }; /* returns pointer to start of pos. entry of tcg log */ @@ -206,7 +214,7 @@ static int get_event_name(char *dest, struct tcpa_event *event, const char *name = ""; char data[40] = ""; int i, n_len = 0, d_len = 0; - u32 event_id; + struct tcpa_pc_event *pc_event; switch(event->event_type) { case PREBOOT: @@ -235,31 +243,32 @@ static int get_event_name(char *dest, struct tcpa_event *event, } break; case EVENT_TAG: - event_id = be32_to_cpu(*((u32 *)event_entry)); + pc_event = (struct tcpa_pc_event *)event_entry; /* ToDo Row data -> Base64 */ - switch (event_id) { + switch (pc_event->event_id) { case SMBIOS: case BIS_CERT: case CMOS: case NVRAM: case OPTION_ROM_EXEC: case OPTION_ROM_CONFIG: - case OPTION_ROM_MICROCODE: case S_CRTM_VERSION: - case S_CRTM_CONTENTS: - case POST_CONTENTS: - name = tcpa_pc_event_id_strings[event_id]; + name = tcpa_pc_event_id_strings[pc_event->event_id]; n_len = strlen(name); break; + /* hash data */ case POST_BIOS_ROM: case ESCD: - name = tcpa_pc_event_id_strings[event_id]; + case OPTION_ROM_MICROCODE: + case S_CRTM_CONTENTS: + case POST_CONTENTS: + name = tcpa_pc_event_id_strings[pc_event->event_id]; n_len = strlen(name); for (i = 0; i < 20; i++) - d_len += sprintf(data, "%02x", - event_entry[8 + i]); + d_len += sprintf(&data[2*i], "%02x", + pc_event->event_data[i]); break; default: break; -- cgit v1.2.2 From 44d7aff035118e8c3993aa3fa05d358d1008e982 Mon Sep 17 00:00:00 2001 From: Seiji Munetoh Date: Tue, 30 May 2006 21:25:52 -0700 Subject: [PATCH] tpm: more bios log parsing fixes From: Seiji Munetoh Change the binary output format to actual ACPI TCPA log structure since the current format does not contain all event-data information that need to verify the PCRs in TPM. tpm_binary_bios_measurements_show() uses get_event_name() to convert the binary event-data to ascii format, and puts them as binary. However, to verify the PCRs, the event-data must be a actual binary event-data used by SHA1 calc. in BIOS. So, I think actual ACPI TCPA log is good for this binary output format. That way, any userland tools easily parse this data with reference to TCG PC specification. Signed-off-by: Seiji Munetoh Acked-by: Kylene Hall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tpm/tpm_bios.c | 48 ++++----------------------------------------- 1 file changed, 4 insertions(+), 44 deletions(-) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c index 60380174f245..a611972024e6 100644 --- a/drivers/char/tpm/tpm_bios.c +++ b/drivers/char/tpm/tpm_bios.c @@ -284,53 +284,13 @@ static int get_event_name(char *dest, struct tcpa_event *event, static int tpm_binary_bios_measurements_show(struct seq_file *m, void *v) { + struct tcpa_event *event = v; + char *data = v; + int i; - char *eventname; - char data[4]; - u32 help; - int i, len; - struct tcpa_event *event = (struct tcpa_event *) v; - unsigned char *event_entry = - (unsigned char *) (v + sizeof(struct tcpa_event)); - - eventname = kmalloc(MAX_TEXT_EVENT, GFP_KERNEL); - if (!eventname) { - printk(KERN_ERR "%s: ERROR - No Memory for event name\n ", - __func__); - return -ENOMEM; - } - - /* 1st: PCR used is in little-endian format (4 bytes) */ - help = le32_to_cpu(event->pcr_index); - memcpy(data, &help, 4); - for (i = 0; i < 4; i++) - seq_putc(m, data[i]); - - /* 2nd: SHA1 (20 bytes) */ - for (i = 0; i < 20; i++) - seq_putc(m, event->pcr_value[i]); - - /* 3rd: event type identifier (4 bytes) */ - help = le32_to_cpu(event->event_type); - memcpy(data, &help, 4); - for (i = 0; i < 4; i++) + for (i = 0; i < sizeof(struct tcpa_event) + event->event_size; i++) seq_putc(m, data[i]); - len = 0; - - len += get_event_name(eventname, event, event_entry); - - /* 4th: filename <= 255 + \'0' delimiter */ - if (len > TCG_EVENT_NAME_LEN_MAX) - len = TCG_EVENT_NAME_LEN_MAX; - - for (i = 0; i < len; i++) - seq_putc(m, eventname[i]); - - /* 5th: delimiter */ - seq_putc(m, '\0'); - - kfree(eventname); return 0; } -- cgit v1.2.2 From d61a3ead268084cc271d7b2aa2950fc822a37cf5 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Tue, 30 May 2006 21:25:57 -0700 Subject: [PATCH] IPMI: reserve I/O ports separately From: Corey Minyard This patch is pretty important to get in for IPMI, new systems have been changing the way ACPI and IPMI interact, and this works around the problems for now. This is a temporary fix until we get proper ACPI handling in IPMI. Fixed releasing already-allocated regions when a later request fails, and forward-ported it to HEAD. Some BIOSes reserve disjoint I/O regions in their ACPI tables for the IPMI controller. This causes problems when trying to register the entire I/O region. Therefore we must register each I/O port separately. Signed-off-by: Jordan Hargrave Signed-off-by: Matt Domsch Signed-off-by: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_si_intf.c | 38 ++++++++++++++++++++++---------------- 1 file changed, 22 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index b36eef0e9d19..02a7dd7a8a55 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -1184,20 +1184,20 @@ static void port_outl(struct si_sm_io *io, unsigned int offset, static void port_cleanup(struct smi_info *info) { unsigned int addr = info->io.addr_data; - int mapsize; + int idx; if (addr) { - mapsize = ((info->io_size * info->io.regspacing) - - (info->io.regspacing - info->io.regsize)); - - release_region (addr, mapsize); + for (idx = 0; idx < info->io_size; idx++) { + release_region(addr + idx * info->io.regspacing, + info->io.regsize); + } } } static int port_setup(struct smi_info *info) { unsigned int addr = info->io.addr_data; - int mapsize; + int idx; if (!addr) return -ENODEV; @@ -1225,16 +1225,22 @@ static int port_setup(struct smi_info *info) return -EINVAL; } - /* Calculate the total amount of memory to claim. This is an - * unusual looking calculation, but it avoids claiming any - * more memory than it has to. It will claim everything - * between the first address to the end of the last full - * register. */ - mapsize = ((info->io_size * info->io.regspacing) - - (info->io.regspacing - info->io.regsize)); - - if (request_region(addr, mapsize, DEVICE_NAME) == NULL) - return -EIO; + /* Some BIOSes reserve disjoint I/O regions in their ACPI + * tables. This causes problems when trying to register the + * entire I/O region. Therefore we must register each I/O + * port separately. + */ + for (idx = 0; idx < info->io_size; idx++) { + if (request_region(addr + idx * info->io.regspacing, + info->io.regsize, DEVICE_NAME) == NULL) { + /* Undo allocations */ + while (idx--) { + release_region(addr + idx * info->io.regspacing, + info->io.regsize); + } + return -EIO; + } + } return 0; } -- cgit v1.2.2 From 760f1fce030ccc620ec430a8aff8fc604e7891ed Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 30 May 2006 21:26:03 -0700 Subject: [PATCH] revert "swsusp add check for suspension of X controlled devices" From: Andrew Morton Revert commit ff4da2e262d2509fe1bacff70dd00934be569c66. It broke APM suspend, probably because APM doesn't switch back to a VT when suspending. Tracked down by Matt Mackall Rafael sayeth: "It only fixed the theoretical issue that a quick-handed user could switch to X after processes have been frozen and before the devices are suspended. With the current userland suspend tools it shouldn't be necessary." Cc: Pavel Machek Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/base/power/suspend.c | 5 +---- drivers/char/vt.c | 8 -------- 2 files changed, 1 insertion(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/base/power/suspend.c b/drivers/base/power/suspend.c index 662209d3f42d..2a769cc6f5f9 100644 --- a/drivers/base/power/suspend.c +++ b/drivers/base/power/suspend.c @@ -8,7 +8,6 @@ * */ -#include #include #include #include @@ -66,6 +65,7 @@ int suspend_device(struct device * dev, pm_message_t state) return error; } + /** * device_suspend - Save state and stop all devices in system. * @state: Power state to put each device in. @@ -85,9 +85,6 @@ int device_suspend(pm_message_t state) { int error = 0; - if (!is_console_suspend_safe()) - return -EINVAL; - down(&dpm_sem); down(&dpm_list_sem); while (!list_empty(&dpm_active) && error == 0) { diff --git a/drivers/char/vt.c b/drivers/char/vt.c index acc5d47844eb..6c94879e0b99 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -3238,14 +3238,6 @@ void vcs_scr_writew(struct vc_data *vc, u16 val, u16 *org) } } -int is_console_suspend_safe(void) -{ - /* It is unsafe to suspend devices while X has control of the - * hardware. Make sure we are running on a kernel-controlled console. - */ - return vc_cons[fg_console].d->vc_mode == KD_TEXT; -} - /* * Visible symbols for modules */ -- cgit v1.2.2 From c05b7f3d12b9455d746b69b7078ed34d777f560b Mon Sep 17 00:00:00 2001 From: Rodolfo Giometti Date: Tue, 30 May 2006 21:26:57 -0700 Subject: [PATCH] au1100fb: Fix compilation From: Rodolfo Giometti Fix the following warning on compilation: drivers/video/au1100fb.c: In function `au1100fb_fb_setcolreg': drivers/video/au1100fb.c:219: warning: ISO C90 forbids mixed declarations and code drivers/video/au1100fb.c: In function `au1100fb_fb_pan_display': drivers/video/au1100fb.c:321: warning: ISO C90 forbids mixed declarations and code drivers/video/au1100fb.c: In function `au1100fb_fb_mmap': drivers/video/au1100fb.c:387: warning: ISO C90 forbids mixed declarations and code drivers/video/au1100fb.c: In function `au1100fb_drv_probe': drivers/video/au1100fb.c:471: warning: unsigned int format, long unsigned int arg (arg 2) drivers/video/au1100fb.c: At top level: drivers/video/au1100fb.c:617: warning: initialization from incompatible pointer type drivers/video/au1100fb.c:618: warning: initialization from incompatible pointer type Signed-off-by: Rodolfo Giometti Signed-off-by: Antonino Daplas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/au1100fb.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c index 3d04b2def0f1..789450bb0bc9 100644 --- a/drivers/video/au1100fb.c +++ b/drivers/video/au1100fb.c @@ -214,10 +214,13 @@ int au1100fb_setmode(struct au1100fb_device *fbdev) */ int au1100fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fbi) { - struct au1100fb_device *fbdev = to_au1100fb_device(fbi); - u32 *palette = fbdev->regs->lcd_pallettebase; + struct au1100fb_device *fbdev; + u32 *palette; u32 value; + fbdev = to_au1100fb_device(fbi); + palette = fbdev->regs->lcd_pallettebase; + if (regno > (AU1100_LCD_NBR_PALETTE_ENTRIES - 1)) return -EINVAL; @@ -316,9 +319,11 @@ int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi) */ int au1100fb_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi) { - struct au1100fb_device *fbdev = to_au1100fb_device(fbi); + struct au1100fb_device *fbdev; int dy; + fbdev = to_au1100fb_device(fbi); + print_dbg("fb_pan_display %p %p", var, fbi); if (!var || !fbdev) { @@ -382,10 +387,12 @@ void au1100fb_fb_rotate(struct fb_info *fbi, int angle) */ int au1100fb_fb_mmap(struct fb_info *fbi, struct vm_area_struct *vma) { - struct au1100fb_device *fbdev = to_au1100fb_device(fbi); + struct au1100fb_device *fbdev; unsigned int len; unsigned long start=0, off; + fbdev = to_au1100fb_device(fbi); + if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) { return -EINVAL; } @@ -467,7 +474,7 @@ int au1100fb_drv_probe(struct device *dev) if (!request_mem_region(au1100fb_fix.mmio_start, au1100fb_fix.mmio_len, DRIVER_NAME)) { - print_err("fail to lock memory region at 0x%08x", + print_err("fail to lock memory region at 0x%08lx", au1100fb_fix.mmio_start); return -EBUSY; } @@ -595,13 +602,13 @@ int au1100fb_drv_remove(struct device *dev) return 0; } -int au1100fb_drv_suspend(struct device *dev, u32 state, u32 level) +int au1100fb_drv_suspend(struct device *dev, pm_message_t state) { /* TODO */ return 0; } -int au1100fb_drv_resume(struct device *dev, u32 level) +int au1100fb_drv_resume(struct device *dev) { /* TODO */ return 0; -- cgit v1.2.2 From 8fd66ab852281f9e28e1774c17b49f26c4626fd1 Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Tue, 30 May 2006 21:27:02 -0700 Subject: [PATCH] maxinefb: Fix compilation error From: Martin Michlmayr Fix the following compilation error: CC drivers/video/maxinefb.o drivers/video/maxinefb.c:58: warning: initializer-string for array of chars is too long drivers/video/maxinefb.c:58: warning: (near initialization for \u2018maxinefb_fix.id\u2019) drivers/video/maxinefb.c:110: error: unknown field \u2018fb_get_fix\u2019 specified in initializer drivers/video/maxinefb.c:110: error: \u2018gen_get_fix\u2019 undeclared here (not in a function) drivers/video/maxinefb.c:111: error: unknown field \u2018fb_get_var\u2019 specified in initializer drivers/video/maxinefb.c:111: error: \u2018gen_get_var\u2019 undeclared here (not in a function) make[2]: *** [drivers/video/maxinefb.o] Error 1 Signed-off-by: Martin Michlmayr Signed-off-by: Antonino Daplas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/maxinefb.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/video/maxinefb.c b/drivers/video/maxinefb.c index 743e7ad26acc..f85421bf7cb5 100644 --- a/drivers/video/maxinefb.c +++ b/drivers/video/maxinefb.c @@ -55,7 +55,7 @@ static struct fb_var_screeninfo maxinefb_defined = { }; static struct fb_fix_screeninfo maxinefb_fix = { - .id = "Maxine onboard graphics 1024x768x8", + .id = "Maxine", .smem_len = (1024*768), .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_PSEUDOCOLOR, @@ -107,8 +107,6 @@ static int maxinefb_setcolreg(unsigned regno, unsigned red, unsigned green, static struct fb_ops maxinefb_ops = { .owner = THIS_MODULE, - .fb_get_fix = gen_get_fix, - .fb_get_var = gen_get_var, .fb_setcolreg = maxinefb_setcolreg, .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, -- cgit v1.2.2 From a835fa798ddfbfe4c63ff5e22c93fa5d24c95f7b Mon Sep 17 00:00:00 2001 From: Jeremy Higdon Date: Tue, 30 May 2006 21:27:07 -0700 Subject: [PATCH] sgiioc4: use mmio ops instead of port io From: Jeremy Higdon This patch fixes a bug in sgiioc4 where it was using the default IDE port I/O operations instead of MMIO. The IDE part of the IOC4 chip uses MMIO to map the chip registers. Unfortunately, the sgiioc4 driver uses the default port IO operations, which happens to have worked for the past few years. That's about to change, however, thus this change from inX/outX to readX/writeX. Signed-off-by: Jeremy Higdon Cc: Bartlomiej Zolnierkiewicz Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/ide/pci/sgiioc4.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index 43b96e298363..27c9eb989a9a 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -345,17 +345,17 @@ sgiioc4_resetproc(ide_drive_t * drive) static u8 sgiioc4_INB(unsigned long port) { - u8 reg = (u8) inb(port); + u8 reg = (u8) readb((void __iomem *) port); if ((port & 0xFFF) == 0x11C) { /* Status register of IOC4 */ if (reg & 0x51) { /* Not busy...check for interrupt */ unsigned long other_ir = port - 0x110; - unsigned int intr_reg = (u32) inl(other_ir); + unsigned int intr_reg = (u32) readl((void __iomem *) other_ir); /* Clear the Interrupt, Error bits on the IOC4 */ if (intr_reg & 0x03) { - outl(0x03, other_ir); - intr_reg = (u32) inl(other_ir); + writel(0x03, (void __iomem *) other_ir); + intr_reg = (u32) readl((void __iomem *) other_ir); } } } @@ -606,6 +606,12 @@ ide_init_sgiioc4(ide_hwif_t * hwif) hwif->ide_dma_host_off = &sgiioc4_ide_dma_host_off; hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq; hwif->ide_dma_timeout = &__ide_dma_timeout; + + /* + * The IOC4 uses MMIO rather than Port IO. + * It also needs special workarounds for INB. + */ + default_hwif_mmiops(hwif); hwif->INB = &sgiioc4_INB; } @@ -743,6 +749,6 @@ ioc4_ide_exit(void) module_init(ioc4_ide_init); module_exit(ioc4_ide_exit); -MODULE_AUTHOR("Aniket Malatpure - Silicon Graphics Inc. (SGI)"); +MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon"); MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card"); MODULE_LICENSE("GPL"); -- cgit v1.2.2 From c331eb04b995ad276a7ece4608326f1db4e137d8 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 30 May 2006 21:27:13 -0700 Subject: [PATCH] md: Fix badness in sysfs_notify caused by md_new_event From: NeilBrown If an error is reported by a drive in a RAID array (which is done via bi_end_io - in interrupt context), we call md_error and md_new_event which calls sysfs_notify. However sysfs_notify grabs a mutex and so cannot be called in interrupt context. This patch just creates a variant of md_new_event which avoids the sysfs call, and uses that. A better fix for later is to arrange for the event to be called from user-context. Note: avoiding the sysfs call isn't a problem as an error will not, by itself, modify the sync_action attribute. (We do still need to wake_up(&md_event_waiters) as an error by itself will modify /proc/mdstat). Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/md.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index ec802913f977..f19b874753a9 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -167,6 +167,15 @@ void md_new_event(mddev_t *mddev) } EXPORT_SYMBOL_GPL(md_new_event); +/* Alternate version that can be called from interrupts + * when calling sysfs_notify isn't needed. + */ +void md_new_event_inintr(mddev_t *mddev) +{ + atomic_inc(&md_event_count); + wake_up(&md_event_waiters); +} + /* * Enables to iterate over all existing md arrays * all_mddevs_lock protects this list. @@ -4149,7 +4158,7 @@ void md_error(mddev_t *mddev, mdk_rdev_t *rdev) set_bit(MD_RECOVERY_INTR, &mddev->recovery); set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); md_wakeup_thread(mddev->thread); - md_new_event(mddev); + md_new_event_inintr(mddev); } /* seq_file implementation /proc/mdstat */ -- cgit v1.2.2 From f52359622fa25783cf1a08c0772048d2ed1a7434 Mon Sep 17 00:00:00 2001 From: Bryan Holty Date: Wed, 22 Mar 2006 06:35:39 -0600 Subject: [SCSI] scsi_lib.c: properly count the number of pages in scsi_req_map_sg() The calculation of nr_pages in scsi_req_map_sg() doesn't account for the fact that the first page could have an offset that pushes the end of the buffer onto a new page. Signed-off-by: Bryan Holty Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 764a8b375ead..faee4757c03a 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -367,7 +367,7 @@ static int scsi_req_map_sg(struct request *rq, struct scatterlist *sgl, int nsegs, unsigned bufflen, gfp_t gfp) { struct request_queue *q = rq->q; - int nr_pages = (bufflen + PAGE_SIZE - 1) >> PAGE_SHIFT; + int nr_pages = (bufflen + sgl[0].offset + PAGE_SIZE - 1) >> PAGE_SHIFT; unsigned int data_len = 0, len, bytes, off; struct page *page; struct bio *bio = NULL; -- cgit v1.2.2 From 1617406a763870a84ffe6bba3659f30f96ac4a61 Mon Sep 17 00:00:00 2001 From: Florin Malita Date: Wed, 24 May 2006 21:21:31 -0400 Subject: [PATCH] pcmcia: missing pcmcia_get_socket() result check The result of pcmcia_get_socket() may be NULL but ds_event() uses it without checking. Coverity CID: 436. Signed-off-by: Florin Malita Signed-off-by: Dominik Brodowski --- drivers/pcmcia/ds.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 48d3b3d30c21..74b3124e8247 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -1143,6 +1143,12 @@ static int ds_event(struct pcmcia_socket *skt, event_t event, int priority) { struct pcmcia_socket *s = pcmcia_get_socket(skt); + if (!s) { + printk(KERN_ERR "PCMCIA obtaining reference to socket %p " \ + "failed, event 0x%x lost!\n", skt, event); + return -ENODEV; + } + ds_dbg(1, "ds_event(0x%06x, %d, 0x%p)\n", event, priority, skt); -- cgit v1.2.2 From 2b0dd802ba1ff9b7001f5f9bd9b4d192a4aabf81 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Thu, 1 Jun 2006 18:29:20 +0200 Subject: [PATCH] pcmcia: fix zeroing of cm4000_cs.c data Fix the incorrect calculation of how much to zero out in struct cm4000_dev on device initialization. Signed-off-by: Dominik Brodowski --- drivers/char/pcmcia/cm4000_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index 128b2632512d..eab5394da666 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -149,7 +149,7 @@ struct cm4000_dev { #define ZERO_DEV(dev) \ memset(&dev->atr_csum,0, \ sizeof(struct cm4000_dev) - \ - /*link*/ sizeof(struct pcmcia_device) - \ + /*link*/ sizeof(struct pcmcia_device *) - \ /*node*/ sizeof(dev_node_t) - \ /*atr*/ MAX_ATR*sizeof(char) - \ /*rbuf*/ 512*sizeof(char) - \ -- cgit v1.2.2 From 092d01e260da628b01d4229c31a296111e3cd97a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 4 Jun 2006 17:40:58 +0100 Subject: [MMC] Prevent au1xmmc.c breakage on non-Au1200 Alchemy The driver is selectable on other than Au1200 Alchemy systems but won't build nor work - there is no MMC hw. Signed-off-by: Ralf Baechle Signed-off-by: Russell King --- drivers/mmc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 003b077c2324..45bcf098e762 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -84,7 +84,7 @@ config MMC_WBSD config MMC_AU1X tristate "Alchemy AU1XX0 MMC Card Interface support" - depends on SOC_AU1X00 && MMC + depends on MMC && SOC_AU1200 help This selects the AMD Alchemy(R) Multimedia card interface. If you have a Alchemy platform with a MMC slot, say Y or M here. -- cgit v1.2.2 From 959eb39297e8c82f61fbfc283ad4ff11c883bf1e Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 5 Jun 2006 09:51:36 -0700 Subject: IPoIB: Fix AH leak at interface down When ipoib_stop() is called it first calls netif_stop_queue() to stop the kernel from passing more packets to the network driver. However, the completion handler may call netif_wake_queue() re-enabling packet transfer. This might result in leaks (we see AH leaks which we think can be attributed to this bug) as new packets get posted while the interface is going down. Signed-off-by: Eli Cohen Signed-off-by: Michael Tsirkin Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_ib.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index a54da42849ae..8406839b91cf 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -275,6 +275,7 @@ static void ipoib_ib_handle_wc(struct net_device *dev, spin_lock_irqsave(&priv->tx_lock, flags); ++priv->tx_tail; if (netif_queue_stopped(dev) && + test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags) && priv->tx_head - priv->tx_tail <= ipoib_sendq_size >> 1) netif_wake_queue(dev); spin_unlock_irqrestore(&priv->tx_lock, flags); -- cgit v1.2.2 From ea9a7719597e81a119a155178eabfc941eef11cc Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Sun, 4 Jun 2006 02:20:42 +0200 Subject: [PATCH] bcm43xx: add DMA rx poll workaround to DMA4 Also add the Poll RX DMA Memory workaround to the DMA4 (xmitstatus) path. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/bcm43xx/bcm43xx_dma.c | 31 +++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_dma.c b/drivers/net/wireless/bcm43xx/bcm43xx_dma.c index bbecba02e697..d0318e525ba7 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_dma.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_dma.c @@ -624,25 +624,28 @@ err_destroy_tx0: static u16 generate_cookie(struct bcm43xx_dmaring *ring, int slot) { - u16 cookie = 0x0000; + u16 cookie = 0xF000; /* Use the upper 4 bits of the cookie as * DMA controller ID and store the slot number - * in the lower 12 bits + * in the lower 12 bits. + * Note that the cookie must never be 0, as this + * is a special value used in RX path. */ switch (ring->mmio_base) { default: assert(0); case BCM43xx_MMIO_DMA1_BASE: + cookie = 0xA000; break; case BCM43xx_MMIO_DMA2_BASE: - cookie = 0x1000; + cookie = 0xB000; break; case BCM43xx_MMIO_DMA3_BASE: - cookie = 0x2000; + cookie = 0xC000; break; case BCM43xx_MMIO_DMA4_BASE: - cookie = 0x3000; + cookie = 0xD000; break; } assert(((u16)slot & 0xF000) == 0x0000); @@ -660,16 +663,16 @@ struct bcm43xx_dmaring * parse_cookie(struct bcm43xx_private *bcm, struct bcm43xx_dmaring *ring = NULL; switch (cookie & 0xF000) { - case 0x0000: + case 0xA000: ring = dma->tx_ring0; break; - case 0x1000: + case 0xB000: ring = dma->tx_ring1; break; - case 0x2000: + case 0xC000: ring = dma->tx_ring2; break; - case 0x3000: + case 0xD000: ring = dma->tx_ring3; break; default: @@ -839,8 +842,18 @@ static void dma_rx(struct bcm43xx_dmaring *ring, /* We received an xmit status. */ struct bcm43xx_hwxmitstatus *hw = (struct bcm43xx_hwxmitstatus *)skb->data; struct bcm43xx_xmitstatus stat; + int i = 0; stat.cookie = le16_to_cpu(hw->cookie); + while (stat.cookie == 0) { + if (unlikely(++i >= 10000)) { + assert(0); + break; + } + udelay(2); + barrier(); + stat.cookie = le16_to_cpu(hw->cookie); + } stat.flags = hw->flags; stat.cnt1 = hw->cnt1; stat.cnt2 = hw->cnt2; -- cgit v1.2.2 From 6f258910733a8dbde368acc2ede4b8184ff0e09a Mon Sep 17 00:00:00 2001 From: Florin Malita Date: Sun, 4 Jun 2006 02:51:26 -0700 Subject: [PATCH] nmclan_cs: dereferencing skb after netif_rx() From: Florin Malita The skb may be gone after netif_rx(), we can't use 'skb->len' to update the stats. 'pkt_len' should work instead. Coverity CID: 911. Signed-off-by: Florin Malita Cc: Dominik Brodowski Acked-by: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/pcmcia/nmclan_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 4260c2128f47..a8f6bfc96fd2 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -1204,7 +1204,7 @@ static int mace_rx(struct net_device *dev, unsigned char RxCnt) dev->last_rx = jiffies; lp->linux_stats.rx_packets++; - lp->linux_stats.rx_bytes += skb->len; + lp->linux_stats.rx_bytes += pkt_len; outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */ continue; } else { -- cgit v1.2.2 From e0ec574987a3301f7767750bb6e8be47d6323bfa Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Sun, 4 Jun 2006 02:51:27 -0700 Subject: [PATCH] s390: irb memcpy argument swap From: Cornelia Huck Swapped memcpy arguments in ccw_device_irq() when doing basic sense after unsolicited interrupt. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/s390/cio/device_fsm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c index 180b3bf8b90d..49ec562d7f60 100644 --- a/drivers/s390/cio/device_fsm.c +++ b/drivers/s390/cio/device_fsm.c @@ -749,7 +749,7 @@ ccw_device_irq(struct ccw_device *cdev, enum dev_event dev_event) /* Unit check but no sense data. Need basic sense. */ if (ccw_device_do_sense(cdev, irb) != 0) goto call_handler_unsol; - memcpy(irb, &cdev->private->irb, sizeof(struct irb)); + memcpy(&cdev->private->irb, irb, sizeof(struct irb)); cdev->private->state = DEV_STATE_W4SENSE; cdev->private->intparm = 0; return; -- cgit v1.2.2 From 4ae9538dd02824257e8e72c053c69ad6680aba04 Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter Date: Sun, 4 Jun 2006 02:51:28 -0700 Subject: [PATCH] s390: cio non-unique path group ids From: Peter Oberparleiter The path grouping can fail due to non-unique pathgroup-IDs. The source for the CPU-ID part of the ID was incorrectly specified on 64 bit systems. Additionally, the length of the ID was too large due to incorrect data packing declaration. Fix CPU-ID lowcore address and add missing packing declaration. Signed-off-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/s390/cio/css.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h index 74a257b23383..e210f89a2449 100644 --- a/drivers/s390/cio/css.h +++ b/drivers/s390/cio/css.h @@ -45,11 +45,11 @@ struct pgid { union { __u8 fc; /* SPID function code */ struct path_state ps; /* SNID path state */ - } inf; + } __attribute__ ((packed)) inf; union { __u32 cpu_addr : 16; /* CPU address */ struct extended_cssid ext_cssid; - } pgid_high; + } __attribute__ ((packed)) pgid_high; __u32 cpu_id : 24; /* CPU identification */ __u32 cpu_model : 16; /* CPU model */ __u32 tod_high; /* high word TOD clock */ -- cgit v1.2.2 From 0674d594ad8e0856243536c0bcc22e4583554bfb Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Sun, 4 Jun 2006 02:51:38 -0700 Subject: [PATCH] Implement get / set tso for forcedeth driver From: Zachary Amsden Signed-off-by: Zachary Amsden Cc: Ayaz Abdulla Cc: Manfred Spraul Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/forcedeth.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 705e1229d89d..feb5b223cd60 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -2615,6 +2615,18 @@ static int nv_nway_reset(struct net_device *dev) return ret; } +#ifdef NETIF_F_TSO +static int nv_set_tso(struct net_device *dev, u32 value) +{ + struct fe_priv *np = netdev_priv(dev); + + if ((np->driver_data & DEV_HAS_CHECKSUM)) + return ethtool_op_set_tso(dev, value); + else + return value ? -EOPNOTSUPP : 0; +} +#endif + static struct ethtool_ops ops = { .get_drvinfo = nv_get_drvinfo, .get_link = ethtool_op_get_link, @@ -2626,6 +2638,10 @@ static struct ethtool_ops ops = { .get_regs = nv_get_regs, .nway_reset = nv_nway_reset, .get_perm_addr = ethtool_op_get_perm_addr, +#ifdef NETIF_F_TSO + .get_tso = ethtool_op_get_tso, + .set_tso = nv_set_tso +#endif }; static void nv_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) -- cgit v1.2.2 From 829a1985e732698ee98def146410e6e9f532781f Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sun, 4 Jun 2006 02:51:40 -0700 Subject: [PATCH] sbp2: fix check of return value of hpsb_allocate_and_register_addrspace() From: Stefan Richter I added a failure check in patch "sbp2: variable status FIFO address (fix login timeout)" --- alas for a wrong error value. This is a bug since Linux 2.6.16. Leads to NULL pointer dereference if the call failed, and bogus failure handling if call succeeded. Signed-off-by: Stefan Richter Cc: Cc: Ben Collins Cc: Jody McIntyre Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/ieee1394/sbp2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index 8a23fb54c693..5413dc43b9f1 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -845,7 +845,7 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud &sbp2_highlevel, ud->ne->host, &sbp2_ops, sizeof(struct sbp2_status_block), sizeof(quadlet_t), 0x010000000000ULL, CSR1212_ALL_SPACE_END); - if (!scsi_id->status_fifo_addr) { + if (scsi_id->status_fifo_addr == ~0ULL) { SBP2_ERR("failed to allocate status FIFO address range"); goto failed_alloc; } -- cgit v1.2.2 From 67f672f61bb75e74805046e4a301f4923b0ef753 Mon Sep 17 00:00:00 2001 From: Rune Torgersen Date: Sun, 4 Jun 2006 02:51:41 -0700 Subject: [PATCH] sata_sil24: SII3124 sata driver endian problem From: "Rune Torgersen" Fix an endian issue in the sil24 driver. Signed-off-by: Rune Torgersen Acked-by: Jeff Garzik Cc: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/scsi/sata_sil24.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index f7264fd611c2..cb9082fd7e2f 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -454,7 +454,7 @@ static int sil24_softreset(struct ata_port *ap, int verbose, */ msleep(10); - prb->ctrl = PRB_CTRL_SRST; + prb->ctrl = cpu_to_le16(PRB_CTRL_SRST); prb->fis[1] = 0; /* no PM yet */ writel((u32)paddr, port + PORT_CMD_ACTIVATE); @@ -551,9 +551,9 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) { if (qc->tf.flags & ATA_TFLAG_WRITE) - prb->ctrl = PRB_CTRL_PACKET_WRITE; + prb->ctrl = cpu_to_le16(PRB_CTRL_PACKET_WRITE); else - prb->ctrl = PRB_CTRL_PACKET_READ; + prb->ctrl = cpu_to_le16(PRB_CTRL_PACKET_READ); } else prb->ctrl = 0; -- cgit v1.2.2 From 2d7b20c1884777e66009be1a533641c19c4705f6 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sun, 4 Jun 2006 02:51:42 -0700 Subject: [PATCH] m48t86: ia64 build fix From: Andrew Morton drivers/rtc/rtc-m48t86.c: In function `m48t86_rtc_read_time': drivers/rtc/rtc-m48t86.c:51: error: structure has no member named `ia64_mv' drivers/rtc/rtc-m48t86.c:55: error: structure has no member named `ia64_mv' drivers/rtc/rtc-m48t86.c:56: error: structure has no member named `ia64_mv' drivers/rtc/rtc-m48t86.c:57: error: structure has no member named `ia64_mv' drivers/rtc/rtc-m48t86.c:58: error: structure has no member named `ia64_mv' drivers/rtc/rtc-m48t86.c:60: error: structure has no member named `ia64_mv' readb() and writeb() are macros on ia64. Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-m48t86.c | 72 ++++++++++++++++++++++++------------------------ 1 file changed, 36 insertions(+), 36 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-m48t86.c b/drivers/rtc/rtc-m48t86.c index f6e7ee04f3dc..8c0d1a6739ad 100644 --- a/drivers/rtc/rtc-m48t86.c +++ b/drivers/rtc/rtc-m48t86.c @@ -48,33 +48,33 @@ static int m48t86_rtc_read_time(struct device *dev, struct rtc_time *tm) struct platform_device *pdev = to_platform_device(dev); struct m48t86_ops *ops = pdev->dev.platform_data; - reg = ops->readb(M48T86_REG_B); + reg = ops->readbyte(M48T86_REG_B); if (reg & M48T86_REG_B_DM) { /* data (binary) mode */ - tm->tm_sec = ops->readb(M48T86_REG_SEC); - tm->tm_min = ops->readb(M48T86_REG_MIN); - tm->tm_hour = ops->readb(M48T86_REG_HOUR) & 0x3F; - tm->tm_mday = ops->readb(M48T86_REG_DOM); + tm->tm_sec = ops->readbyte(M48T86_REG_SEC); + tm->tm_min = ops->readbyte(M48T86_REG_MIN); + tm->tm_hour = ops->readbyte(M48T86_REG_HOUR) & 0x3F; + tm->tm_mday = ops->readbyte(M48T86_REG_DOM); /* tm_mon is 0-11 */ - tm->tm_mon = ops->readb(M48T86_REG_MONTH) - 1; - tm->tm_year = ops->readb(M48T86_REG_YEAR) + 100; - tm->tm_wday = ops->readb(M48T86_REG_DOW); + tm->tm_mon = ops->readbyte(M48T86_REG_MONTH) - 1; + tm->tm_year = ops->readbyte(M48T86_REG_YEAR) + 100; + tm->tm_wday = ops->readbyte(M48T86_REG_DOW); } else { /* bcd mode */ - tm->tm_sec = BCD2BIN(ops->readb(M48T86_REG_SEC)); - tm->tm_min = BCD2BIN(ops->readb(M48T86_REG_MIN)); - tm->tm_hour = BCD2BIN(ops->readb(M48T86_REG_HOUR) & 0x3F); - tm->tm_mday = BCD2BIN(ops->readb(M48T86_REG_DOM)); + tm->tm_sec = BCD2BIN(ops->readbyte(M48T86_REG_SEC)); + tm->tm_min = BCD2BIN(ops->readbyte(M48T86_REG_MIN)); + tm->tm_hour = BCD2BIN(ops->readbyte(M48T86_REG_HOUR) & 0x3F); + tm->tm_mday = BCD2BIN(ops->readbyte(M48T86_REG_DOM)); /* tm_mon is 0-11 */ - tm->tm_mon = BCD2BIN(ops->readb(M48T86_REG_MONTH)) - 1; - tm->tm_year = BCD2BIN(ops->readb(M48T86_REG_YEAR)) + 100; - tm->tm_wday = BCD2BIN(ops->readb(M48T86_REG_DOW)); + tm->tm_mon = BCD2BIN(ops->readbyte(M48T86_REG_MONTH)) - 1; + tm->tm_year = BCD2BIN(ops->readbyte(M48T86_REG_YEAR)) + 100; + tm->tm_wday = BCD2BIN(ops->readbyte(M48T86_REG_DOW)); } /* correct the hour if the clock is in 12h mode */ if (!(reg & M48T86_REG_B_H24)) - if (ops->readb(M48T86_REG_HOUR) & 0x80) + if (ops->readbyte(M48T86_REG_HOUR) & 0x80) tm->tm_hour += 12; return 0; @@ -86,35 +86,35 @@ static int m48t86_rtc_set_time(struct device *dev, struct rtc_time *tm) struct platform_device *pdev = to_platform_device(dev); struct m48t86_ops *ops = pdev->dev.platform_data; - reg = ops->readb(M48T86_REG_B); + reg = ops->readbyte(M48T86_REG_B); /* update flag and 24h mode */ reg |= M48T86_REG_B_SET | M48T86_REG_B_H24; - ops->writeb(reg, M48T86_REG_B); + ops->writebyte(reg, M48T86_REG_B); if (reg & M48T86_REG_B_DM) { /* data (binary) mode */ - ops->writeb(tm->tm_sec, M48T86_REG_SEC); - ops->writeb(tm->tm_min, M48T86_REG_MIN); - ops->writeb(tm->tm_hour, M48T86_REG_HOUR); - ops->writeb(tm->tm_mday, M48T86_REG_DOM); - ops->writeb(tm->tm_mon + 1, M48T86_REG_MONTH); - ops->writeb(tm->tm_year % 100, M48T86_REG_YEAR); - ops->writeb(tm->tm_wday, M48T86_REG_DOW); + ops->writebyte(tm->tm_sec, M48T86_REG_SEC); + ops->writebyte(tm->tm_min, M48T86_REG_MIN); + ops->writebyte(tm->tm_hour, M48T86_REG_HOUR); + ops->writebyte(tm->tm_mday, M48T86_REG_DOM); + ops->writebyte(tm->tm_mon + 1, M48T86_REG_MONTH); + ops->writebyte(tm->tm_year % 100, M48T86_REG_YEAR); + ops->writebyte(tm->tm_wday, M48T86_REG_DOW); } else { /* bcd mode */ - ops->writeb(BIN2BCD(tm->tm_sec), M48T86_REG_SEC); - ops->writeb(BIN2BCD(tm->tm_min), M48T86_REG_MIN); - ops->writeb(BIN2BCD(tm->tm_hour), M48T86_REG_HOUR); - ops->writeb(BIN2BCD(tm->tm_mday), M48T86_REG_DOM); - ops->writeb(BIN2BCD(tm->tm_mon + 1), M48T86_REG_MONTH); - ops->writeb(BIN2BCD(tm->tm_year % 100), M48T86_REG_YEAR); - ops->writeb(BIN2BCD(tm->tm_wday), M48T86_REG_DOW); + ops->writebyte(BIN2BCD(tm->tm_sec), M48T86_REG_SEC); + ops->writebyte(BIN2BCD(tm->tm_min), M48T86_REG_MIN); + ops->writebyte(BIN2BCD(tm->tm_hour), M48T86_REG_HOUR); + ops->writebyte(BIN2BCD(tm->tm_mday), M48T86_REG_DOM); + ops->writebyte(BIN2BCD(tm->tm_mon + 1), M48T86_REG_MONTH); + ops->writebyte(BIN2BCD(tm->tm_year % 100), M48T86_REG_YEAR); + ops->writebyte(BIN2BCD(tm->tm_wday), M48T86_REG_DOW); } /* update ended */ reg &= ~M48T86_REG_B_SET; - ops->writeb(reg, M48T86_REG_B); + ops->writebyte(reg, M48T86_REG_B); return 0; } @@ -125,12 +125,12 @@ static int m48t86_rtc_proc(struct device *dev, struct seq_file *seq) struct platform_device *pdev = to_platform_device(dev); struct m48t86_ops *ops = pdev->dev.platform_data; - reg = ops->readb(M48T86_REG_B); + reg = ops->readbyte(M48T86_REG_B); seq_printf(seq, "mode\t\t: %s\n", (reg & M48T86_REG_B_DM) ? "binary" : "bcd"); - reg = ops->readb(M48T86_REG_D); + reg = ops->readbyte(M48T86_REG_D); seq_printf(seq, "battery\t\t: %s\n", (reg & M48T86_REG_D_VRT) ? "ok" : "exhausted"); @@ -157,7 +157,7 @@ static int __devinit m48t86_rtc_probe(struct platform_device *dev) platform_set_drvdata(dev, rtc); /* read battery status */ - reg = ops->readb(M48T86_REG_D); + reg = ops->readbyte(M48T86_REG_D); dev_info(&dev->dev, "battery %s\n", (reg & M48T86_REG_D_VRT) ? "ok" : "exhausted"); -- cgit v1.2.2 From 92cd6eeea62e235fcb6634d87d1572c3da59f088 Mon Sep 17 00:00:00 2001 From: Matt Mackall Date: Mon, 5 Jun 2006 15:04:37 -0700 Subject: [NETCONSOLE]: Clean up initcall warning. From: Matt Mackall netconsole is being wrong here. If it wasn't enabled there's no error. Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/netconsole.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index 66e74f740261..bf58db29e2ed 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -107,7 +107,7 @@ static int init_netconsole(void) if(!configured) { printk("netconsole: not configured, aborting\n"); - return -EINVAL; + return 0; } if(netpoll_setup(&np)) -- cgit v1.2.2 From 9bc18091a5e44a368827f539289b99788eb27d4e Mon Sep 17 00:00:00 2001 From: Florin Malita Date: Mon, 5 Jun 2006 15:34:33 -0700 Subject: [PPPOE]: Missing result check in __pppoe_xmit(). skb_clone() may fail, we should check the result. Coverity CID: 1215. Signed-off-by: Florin Malita Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/pppoe.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 475dc930380f..0d101a18026a 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -861,6 +861,9 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb) * give dev_queue_xmit something it can free. */ skb2 = skb_clone(skb, GFP_ATOMIC); + + if (skb2 == NULL) + goto abort; } ph = (struct pppoe_hdr *) skb_push(skb2, sizeof(struct pppoe_hdr)); -- cgit v1.2.2 From b9b6e78b11de295ef073271979355d5fab71b877 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Thu, 8 Jun 2006 09:28:38 -0700 Subject: e1000: fix ethtool test irq alloc as "probe" New code added in 2.6.17 caused setup_irq to print a warning when running ethtool -t eth0 offline. This test marks the request_irq call made by this test as a "probe" to see if the interrupt is shared or not. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_ethtool.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index ecccca35c6f4..d1c705b412c2 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -870,13 +870,16 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) *data = 0; /* Hook up test interrupt handler just for this test */ - if (!request_irq(irq, &e1000_test_intr, 0, netdev->name, netdev)) { + if (!request_irq(irq, &e1000_test_intr, SA_PROBEIRQ, netdev->name, + netdev)) { shared_int = FALSE; } else if (request_irq(irq, &e1000_test_intr, SA_SHIRQ, netdev->name, netdev)){ *data = 1; return -1; } + DPRINTK(PROBE,INFO, "testing %s interrupt\n", + (shared_int ? "shared" : "unshared")); /* Disable all the interrupts */ E1000_WRITE_REG(&adapter->hw, IMC, 0xFFFFFFFF); -- cgit v1.2.2 From 24f476eeecba66524af3f95e31ac208eea99e617 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Thu, 8 Jun 2006 09:28:47 -0700 Subject: e1000: remove risky prefetch on next_skb->data It was brought to our attention that the prefetches break e1000 traffic on xscale/arm architectures. Remove them for now. We'll let them stay in mm for a while, or find a better solution to enable. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok --- drivers/net/e1000/e1000_main.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index ed15fcaedaf9..97e71a4fe8eb 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3519,7 +3519,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, buffer_info = &rx_ring->buffer_info[i]; while (rx_desc->status & E1000_RXD_STAT_DD) { - struct sk_buff *skb, *next_skb; + struct sk_buff *skb; u8 status; #ifdef CONFIG_E1000_NAPI if (*work_done >= work_to_do) @@ -3537,8 +3537,6 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, prefetch(next_rxd); next_buffer = &rx_ring->buffer_info[i]; - next_skb = next_buffer->skb; - prefetch(next_skb->data - NET_IP_ALIGN); cleaned = TRUE; cleaned_count++; @@ -3668,7 +3666,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, struct e1000_buffer *buffer_info, *next_buffer; struct e1000_ps_page *ps_page; struct e1000_ps_page_dma *ps_page_dma; - struct sk_buff *skb, *next_skb; + struct sk_buff *skb; unsigned int i, j; uint32_t length, staterr; int cleaned_count = 0; @@ -3697,8 +3695,6 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, prefetch(next_rxd); next_buffer = &rx_ring->buffer_info[i]; - next_skb = next_buffer->skb; - prefetch(next_skb->data - NET_IP_ALIGN); cleaned = TRUE; cleaned_count++; -- cgit v1.2.2 From 26e780e8ef1cc3ef581a07aafe2346bb5a07b4f9 Mon Sep 17 00:00:00 2001 From: Malcom Parsons Date: Thu, 8 Jun 2006 00:43:42 -0700 Subject: [PATCH] fbcon: fix limited scroll in SCROLL_PAN_REDRAW mode From: Malcom Parsons When scrolling up in SCROLL_PAN_REDRAW mode with a large limited scroll region, the bottom few lines have to be redrawn. Without this patch, the wrong text is drawn into these lines, corrupting the display. Observed in 2.6.14 when running an IRC client in the Nintendo DS linux port. I haven't tested if scrolling down has the same problem. Signed-off-by: Antonino Daplas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/console/fbcon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 953eb8c171d6..47ba1a79adcd 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -1745,7 +1745,7 @@ static int fbcon_scroll(struct vc_data *vc, int t, int b, int dir, fbcon_redraw_move(vc, p, 0, t, count); ypan_up_redraw(vc, t, count); if (vc->vc_rows - b > 0) - fbcon_redraw_move(vc, p, b - count, + fbcon_redraw_move(vc, p, b, vc->vc_rows - b, b); } else fbcon_redraw_move(vc, p, t + count, b - t - count, t); -- cgit v1.2.2 From f49639e643e69ff233b14966b8d48541d2e17517 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 9 Jun 2006 11:58:36 -0700 Subject: [TG3]: Handle Sun onboard tg3 chips more correctly. Get rid of all the SUN_570X logic and instead: 1) Make sure MEMARB_ENABLE is set when we probe the SRAM for config information. If that is off we will get timeouts. 2) Always try to sync with the firmware, if there is no firmware running do not treat it as an error and instead just report it the first time we notice this condition. 3) If there is no valid SRAM signature, assume the device is onboard by setting TG3_FLAG_EEPROM_WRITE_PROT. Update driver version and release date. With help from Michael Chan and Fabio Massimo Di Nitto. Signed-off-by: David S. Miller --- drivers/net/tg3.c | 144 ++++++++++++++++++------------------------------------ drivers/net/tg3.h | 3 +- 2 files changed, 50 insertions(+), 97 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 49ad60b72657..862c226dbbe2 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -69,8 +69,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.58" -#define DRV_MODULE_RELDATE "May 22, 2006" +#define DRV_MODULE_VERSION "3.59" +#define DRV_MODULE_RELDATE "June 8, 2006" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -4485,9 +4485,8 @@ static void tg3_disable_nvram_access(struct tg3 *tp) /* tp->lock is held. */ static void tg3_write_sig_pre_reset(struct tg3 *tp, int kind) { - if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X)) - tg3_write_mem(tp, NIC_SRAM_FIRMWARE_MBOX, - NIC_SRAM_FIRMWARE_MBOX_MAGIC1); + tg3_write_mem(tp, NIC_SRAM_FIRMWARE_MBOX, + NIC_SRAM_FIRMWARE_MBOX_MAGIC1); if (tp->tg3_flags2 & TG3_FLG2_ASF_NEW_HANDSHAKE) { switch (kind) { @@ -4568,13 +4567,12 @@ static int tg3_chip_reset(struct tg3 *tp) void (*write_op)(struct tg3 *, u32, u32); int i; - if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X)) { - tg3_nvram_lock(tp); - /* No matching tg3_nvram_unlock() after this because - * chip reset below will undo the nvram lock. - */ - tp->nvram_lock_cnt = 0; - } + tg3_nvram_lock(tp); + + /* No matching tg3_nvram_unlock() after this because + * chip reset below will undo the nvram lock. + */ + tp->nvram_lock_cnt = 0; if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 || @@ -4727,20 +4725,25 @@ static int tg3_chip_reset(struct tg3 *tp) tw32_f(MAC_MODE, 0); udelay(40); - if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X)) { - /* Wait for firmware initialization to complete. */ - for (i = 0; i < 100000; i++) { - tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val); - if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1) - break; - udelay(10); - } - if (i >= 100000) { - printk(KERN_ERR PFX "tg3_reset_hw timed out for %s, " - "firmware will not restart magic=%08x\n", - tp->dev->name, val); - return -ENODEV; - } + /* Wait for firmware initialization to complete. */ + for (i = 0; i < 100000; i++) { + tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val); + if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1) + break; + udelay(10); + } + + /* Chip might not be fitted with firmare. Some Sun onboard + * parts are configured like that. So don't signal the timeout + * of the above loop as an error, but do report the lack of + * running firmware once. + */ + if (i >= 100000 && + !(tp->tg3_flags2 & TG3_FLG2_NO_FWARE_REPORTED)) { + tp->tg3_flags2 |= TG3_FLG2_NO_FWARE_REPORTED; + + printk(KERN_INFO PFX "%s: No firmware running.\n", + tp->dev->name); } if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) && @@ -9075,9 +9078,6 @@ static void __devinit tg3_nvram_init(struct tg3 *tp) { int j; - if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) - return; - tw32_f(GRC_EEPROM_ADDR, (EEPROM_ADDR_FSM_RESET | (EEPROM_DEFAULT_CLOCK_PERIOD << @@ -9210,11 +9210,6 @@ static int tg3_nvram_read(struct tg3 *tp, u32 offset, u32 *val) { int ret; - if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) { - printk(KERN_ERR PFX "Attempt to do nvram_read on Sun 570X\n"); - return -EINVAL; - } - if (!(tp->tg3_flags & TG3_FLAG_NVRAM)) return tg3_nvram_read_using_eeprom(tp, offset, val); @@ -9447,11 +9442,6 @@ static int tg3_nvram_write_block(struct tg3 *tp, u32 offset, u32 len, u8 *buf) { int ret; - if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) { - printk(KERN_ERR PFX "Attempt to do nvram_write on Sun 570X\n"); - return -EINVAL; - } - if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) { tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl & ~GRC_LCLCTRL_GPIO_OUTPUT1); @@ -9578,15 +9568,19 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL, tp->misc_host_ctrl); + /* The memory arbiter has to be enabled in order for SRAM accesses + * to succeed. Normally on powerup the tg3 chip firmware will make + * sure it is enabled, but other entities such as system netboot + * code might disable it. + */ + val = tr32(MEMARB_MODE); + tw32(MEMARB_MODE, val | MEMARB_MODE_ENABLE); + tp->phy_id = PHY_ID_INVALID; tp->led_ctrl = LED_CTRL_MODE_PHY_1; - /* Do not even try poking around in here on Sun parts. */ - if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) { - /* All SUN chips are built-in LOMs. */ - tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT; - return; - } + /* Assume an onboard device by default. */ + tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT; tg3_read_mem(tp, NIC_SRAM_DATA_SIG, &val); if (val == NIC_SRAM_DATA_SIG_MAGIC) { @@ -9686,6 +9680,8 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) if (nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP) tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT; + else + tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT; if (nic_cfg & NIC_SRAM_DATA_CFG_ASF_ENABLE) { tp->tg3_flags |= TG3_FLAG_ENABLE_ASF; @@ -9834,16 +9830,8 @@ static void __devinit tg3_read_partno(struct tg3 *tp) int i; u32 magic; - if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) { - /* Sun decided not to put the necessary bits in the - * NVRAM of their onboard tg3 parts :( - */ - strcpy(tp->board_part_number, "Sun 570X"); - return; - } - if (tg3_nvram_read_swab(tp, 0x0, &magic)) - return; + goto out_not_found; if (magic == TG3_EEPROM_MAGIC) { for (i = 0; i < 256; i += 4) { @@ -9874,6 +9862,9 @@ static void __devinit tg3_read_partno(struct tg3 *tp) break; msleep(1); } + if (!(tmp16 & 0x8000)) + goto out_not_found; + pci_read_config_dword(tp->pdev, vpd_cap + PCI_VPD_DATA, &tmp); tmp = cpu_to_le32(tmp); @@ -9965,37 +9956,6 @@ static void __devinit tg3_read_fw_ver(struct tg3 *tp) } } -#ifdef CONFIG_SPARC64 -static int __devinit tg3_is_sun_570X(struct tg3 *tp) -{ - struct pci_dev *pdev = tp->pdev; - struct pcidev_cookie *pcp = pdev->sysdata; - - if (pcp != NULL) { - int node = pcp->prom_node; - u32 venid; - int err; - - err = prom_getproperty(node, "subsystem-vendor-id", - (char *) &venid, sizeof(venid)); - if (err == 0 || err == -1) - return 0; - if (venid == PCI_VENDOR_ID_SUN) - return 1; - - /* TG3 chips onboard the SunBlade-2500 don't have the - * subsystem-vendor-id set to PCI_VENDOR_ID_SUN but they - * are distinguishable from non-Sun variants by being - * named "network" by the firmware. Non-Sun cards will - * show up as being named "ethernet". - */ - if (!strcmp(pcp->prom_name, "network")) - return 1; - } - return 0; -} -#endif - static int __devinit tg3_get_invariants(struct tg3 *tp) { static struct pci_device_id write_reorder_chipsets[] = { @@ -10012,11 +9972,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) u16 pci_cmd; int err; -#ifdef CONFIG_SPARC64 - if (tg3_is_sun_570X(tp)) - tp->tg3_flags2 |= TG3_FLG2_SUN_570X; -#endif - /* Force memory write invalidate off. If we leave it on, * then on 5700_BX chips we have to enable a workaround. * The workaround is to set the TG3PCI_DMA_RW_CTRL boundary @@ -10312,8 +10267,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) if (tp->write32 == tg3_write_indirect_reg32 || ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) && (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) || - (tp->tg3_flags2 & TG3_FLG2_SUN_570X)) + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701))) tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG; /* Get eeprom hw config before calling tg3_set_power_state(). @@ -10594,8 +10548,7 @@ static int __devinit tg3_get_device_address(struct tg3 *tp) #endif mac_offset = 0x7c; - if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 && - !(tp->tg3_flags & TG3_FLG2_SUN_570X)) || + if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) || (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) { if (tr32(TG3PCI_DUAL_MAC_CTRL) & DUAL_MAC_CTRL_ID) mac_offset = 0xcc; @@ -10622,8 +10575,7 @@ static int __devinit tg3_get_device_address(struct tg3 *tp) } if (!addr_ok) { /* Next, try NVRAM. */ - if (!(tp->tg3_flags & TG3_FLG2_SUN_570X) && - !tg3_nvram_read(tp, mac_offset + 0, &hi) && + if (!tg3_nvram_read(tp, mac_offset + 0, &hi) && !tg3_nvram_read(tp, mac_offset + 4, &lo)) { dev->dev_addr[0] = ((hi >> 16) & 0xff); dev->dev_addr[1] = ((hi >> 24) & 0xff); diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 0e29b885d449..ff0faab94bd5 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2184,7 +2184,7 @@ struct tg3 { #define TG3_FLAG_INIT_COMPLETE 0x80000000 u32 tg3_flags2; #define TG3_FLG2_RESTART_TIMER 0x00000001 -#define TG3_FLG2_SUN_570X 0x00000002 +/* 0x00000002 available */ #define TG3_FLG2_NO_ETH_WIRE_SPEED 0x00000004 #define TG3_FLG2_IS_5788 0x00000008 #define TG3_FLG2_MAX_RXPEND_64 0x00000010 @@ -2216,6 +2216,7 @@ struct tg3 { #define TG3_FLG2_HW_TSO (TG3_FLG2_HW_TSO_1 | TG3_FLG2_HW_TSO_2) #define TG3_FLG2_1SHOT_MSI 0x10000000 #define TG3_FLG2_PHY_JITTER_BUG 0x20000000 +#define TG3_FLG2_NO_FWARE_REPORTED 0x40000000 u32 split_mode_max_reqs; #define SPLIT_MODE_5704_MAX_REQ 3 -- cgit v1.2.2 From c29ca9d1812f2abacaefa7daa31e085600128938 Mon Sep 17 00:00:00 2001 From: "Tom \"spot\" Callaway" Date: Fri, 9 Jun 2006 17:01:48 -0700 Subject: [FUSION]: Fix mptspi.c build with CONFIG_PM not set. Signed-off-by: Tom "spot" Callaway Signed-off-by: David S. Miller --- drivers/message/fusion/mptspi.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c index f2a4d382ea19..3201de053943 100644 --- a/drivers/message/fusion/mptspi.c +++ b/drivers/message/fusion/mptspi.c @@ -831,6 +831,7 @@ mptspi_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) return rc; } +#ifdef CONFIG_PM /* * spi module resume handler */ @@ -846,6 +847,7 @@ mptspi_resume(struct pci_dev *pdev) return rc; } +#endif /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -- cgit v1.2.2 From a913f50706b21c7933f53cec678bb9a1c2383499 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sat, 10 Jun 2006 09:54:13 -0700 Subject: [PATCH] powernow-k8 crash workaround From: Andrew Morton Work around the oops reported in http://bugzilla.kernel.org/show_bug.cgi?id=6478. Thanks to Ralf Hildebrandt for testing and reporting. Acked-by: Dave Jones Cc: "Brown, Len" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/acpi/processor_perflib.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index abbdb37a7f5f..f36db22ce1ae 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -577,6 +577,8 @@ acpi_processor_register_performance(struct acpi_processor_performance return_VALUE(-EBUSY); } + WARN_ON(!performance); + pr->performance = performance; if (acpi_processor_get_performance_info(pr)) { @@ -609,7 +611,8 @@ acpi_processor_unregister_performance(struct acpi_processor_performance return_VOID; } - kfree(pr->performance->states); + if (pr->performance) + kfree(pr->performance->states); pr->performance = NULL; acpi_cpufreq_remove_file(pr); -- cgit v1.2.2 From 57a62fed871eb2a95f296fe6c5c250ce21b81a79 Mon Sep 17 00:00:00 2001 From: Markus Lidel Date: Sat, 10 Jun 2006 09:54:14 -0700 Subject: [PATCH] I2O: Bugfixes to get I2O working again From: Markus Lidel - Fixed locking of struct i2o_exec_wait in Executive-OSM - Removed LCT Notify in i2o_exec_probe() which caused freeing memory and accessing freed memory during first enumeration of I2O devices - Added missing locking in i2o_exec_lct_notify() - removed put_device() of I2O controller in i2o_iop_remove() which caused the controller structure get freed to early - Fixed size of mempool in i2o_iop_alloc() - Fixed access to freed memory in i2o_msg_get() See http://bugzilla.kernel.org/show_bug.cgi?id=6561 Signed-off-by: Markus Lidel Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/message/i2o/exec-osm.c | 72 ++++++++++++++++++++++-------------------- drivers/message/i2o/iop.c | 4 +-- 2 files changed, 38 insertions(+), 38 deletions(-) (limited to 'drivers') diff --git a/drivers/message/i2o/exec-osm.c b/drivers/message/i2o/exec-osm.c index 5ea133c59afb..7bd4d85d0b42 100644 --- a/drivers/message/i2o/exec-osm.c +++ b/drivers/message/i2o/exec-osm.c @@ -55,6 +55,7 @@ struct i2o_exec_wait { u32 m; /* message id */ struct i2o_message *msg; /* pointer to the reply message */ struct list_head list; /* node in global wait list */ + spinlock_t lock; /* lock before modifying */ }; /* Work struct needed to handle LCT NOTIFY replies */ @@ -87,6 +88,7 @@ static struct i2o_exec_wait *i2o_exec_wait_alloc(void) return NULL; INIT_LIST_HEAD(&wait->list); + spin_lock_init(&wait->lock); return wait; }; @@ -125,6 +127,7 @@ int i2o_msg_post_wait_mem(struct i2o_controller *c, struct i2o_message *msg, DECLARE_WAIT_QUEUE_HEAD(wq); struct i2o_exec_wait *wait; static u32 tcntxt = 0x80000000; + long flags; int rc = 0; wait = i2o_exec_wait_alloc(); @@ -146,33 +149,28 @@ int i2o_msg_post_wait_mem(struct i2o_controller *c, struct i2o_message *msg, wait->tcntxt = tcntxt++; msg->u.s.tcntxt = cpu_to_le32(wait->tcntxt); + wait->wq = &wq; + /* + * we add elements to the head, because if a entry in the list will + * never be removed, we have to iterate over it every time + */ + list_add(&wait->list, &i2o_exec_wait_list); + /* * Post the message to the controller. At some point later it will * return. If we time out before it returns then complete will be zero. */ i2o_msg_post(c, msg); - if (!wait->complete) { - wait->wq = &wq; - /* - * we add elements add the head, because if a entry in the list - * will never be removed, we have to iterate over it every time - */ - list_add(&wait->list, &i2o_exec_wait_list); - - wait_event_interruptible_timeout(wq, wait->complete, - timeout * HZ); + wait_event_interruptible_timeout(wq, wait->complete, timeout * HZ); - wait->wq = NULL; - } + spin_lock_irqsave(&wait->lock, flags); - barrier(); + wait->wq = NULL; - if (wait->complete) { + if (wait->complete) rc = le32_to_cpu(wait->msg->body[0]) >> 24; - i2o_flush_reply(c, wait->m); - i2o_exec_wait_free(wait); - } else { + else { /* * We cannot remove it now. This is important. When it does * terminate (which it must do if the controller has not @@ -186,6 +184,13 @@ int i2o_msg_post_wait_mem(struct i2o_controller *c, struct i2o_message *msg, rc = -ETIMEDOUT; } + spin_unlock_irqrestore(&wait->lock, flags); + + if (rc != -ETIMEDOUT) { + i2o_flush_reply(c, wait->m); + i2o_exec_wait_free(wait); + } + return rc; }; @@ -213,7 +218,6 @@ static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m, { struct i2o_exec_wait *wait, *tmp; unsigned long flags; - static spinlock_t lock = SPIN_LOCK_UNLOCKED; int rc = 1; /* @@ -223,23 +227,24 @@ static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m, * already expired. Not much we can do about that except log it for * debug purposes, increase timeout, and recompile. */ - spin_lock_irqsave(&lock, flags); list_for_each_entry_safe(wait, tmp, &i2o_exec_wait_list, list) { if (wait->tcntxt == context) { - list_del(&wait->list); + spin_lock_irqsave(&wait->lock, flags); - spin_unlock_irqrestore(&lock, flags); + list_del(&wait->list); wait->m = m; wait->msg = msg; wait->complete = 1; - barrier(); - - if (wait->wq) { - wake_up_interruptible(wait->wq); + if (wait->wq) rc = 0; - } else { + else + rc = -1; + + spin_unlock_irqrestore(&wait->lock, flags); + + if (rc) { struct device *dev; dev = &c->pdev->dev; @@ -248,15 +253,13 @@ static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m, c->name); i2o_dma_free(dev, &wait->dma); i2o_exec_wait_free(wait); - rc = -1; - } + } else + wake_up_interruptible(wait->wq); return rc; } } - spin_unlock_irqrestore(&lock, flags); - osm_warn("%s: Bogus reply in POST WAIT (tr-context: %08x)!\n", c->name, context); @@ -322,14 +325,9 @@ static DEVICE_ATTR(product_id, S_IRUGO, i2o_exec_show_product_id, NULL); static int i2o_exec_probe(struct device *dev) { struct i2o_device *i2o_dev = to_i2o_device(dev); - struct i2o_controller *c = i2o_dev->iop; i2o_event_register(i2o_dev, &i2o_exec_driver, 0, 0xffffffff); - c->exec = i2o_dev; - - i2o_exec_lct_notify(c, c->lct->change_ind + 1); - device_create_file(dev, &dev_attr_vendor_id); device_create_file(dev, &dev_attr_product_id); @@ -523,6 +521,8 @@ static int i2o_exec_lct_notify(struct i2o_controller *c, u32 change_ind) struct device *dev; struct i2o_message *msg; + down(&c->lct_lock); + dev = &c->pdev->dev; if (i2o_dma_realloc @@ -545,6 +545,8 @@ static int i2o_exec_lct_notify(struct i2o_controller *c, u32 change_ind) i2o_msg_post(c, msg); + up(&c->lct_lock); + return 0; }; diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index 492167446936..febbdd4e0605 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c @@ -804,8 +804,6 @@ void i2o_iop_remove(struct i2o_controller *c) /* Ask the IOP to switch to RESET state */ i2o_iop_reset(c); - - put_device(&c->device); } /** @@ -1059,7 +1057,7 @@ struct i2o_controller *i2o_iop_alloc(void) snprintf(poolname, sizeof(poolname), "i2o_%s_msg_inpool", c->name); if (i2o_pool_alloc - (&c->in_msg, poolname, I2O_INBOUND_MSG_FRAME_SIZE * 4, + (&c->in_msg, poolname, I2O_INBOUND_MSG_FRAME_SIZE * 4 + sizeof(u32), I2O_MSG_INPOOL_MIN)) { kfree(c); return ERR_PTR(-ENOMEM); -- cgit v1.2.2 From 938473b24636d77dc5e9c3f41090d071b6cf4389 Mon Sep 17 00:00:00 2001 From: Milton Miller Date: Sat, 10 Jun 2006 09:54:16 -0700 Subject: [PATCH] powerpc: console_initcall ordering issues From: Milton Miller The add_preferred_console call in rtas_console.c was not causing the console to be selected. It turns out that the add_preferred_console was being called after the hvc_console driver was registered. It only works when it is called before the console driver is registered. Reorder hvc_console.o after the hvc_console drivers to allow the selection during console_initcall processing. Signed-off-by: Milton Miller Signed-off-by: Anton Blanchard Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/Makefile b/drivers/char/Makefile index f5b01c6d498e..fb919bfb2824 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -41,9 +41,9 @@ obj-$(CONFIG_N_HDLC) += n_hdlc.o obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o obj-$(CONFIG_SX) += sx.o generic_serial.o obj-$(CONFIG_RIO) += rio/ generic_serial.o -obj-$(CONFIG_HVC_DRIVER) += hvc_console.o obj-$(CONFIG_HVC_CONSOLE) += hvc_vio.o hvsi.o obj-$(CONFIG_HVC_RTAS) += hvc_rtas.o +obj-$(CONFIG_HVC_DRIVER) += hvc_console.o obj-$(CONFIG_RAW_DRIVER) += raw.o obj-$(CONFIG_SGI_SNSC) += snsc.o snsc_event.o obj-$(CONFIG_MMTIMER) += mmtimer.o -- cgit v1.2.2 From 2f9719b61e1fcf7422a016ac4f2420a0cc6ba320 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 7 Jun 2006 12:53:29 -0400 Subject: [PATCH] sata_mv: grab host lock inside eng_timeout Bug fix: mv_eng_timeout() calls mv_err_intr() without first grabbing the host lock, which can lead to all sorts of interesting scenarios. This whole error-handling portion of sata_mv is nasty (and will get fixed for the new EH stuff), but for now this patch will help keep it on life-support. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 9b8bca1ac1f0..f16f92a6ec0f 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -2035,6 +2035,7 @@ static void mv_phy_reset(struct ata_port *ap) static void mv_eng_timeout(struct ata_port *ap) { struct ata_queued_cmd *qc; + unsigned long flags; printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id); DPRINTK("All regs @ start of eng_timeout\n"); @@ -2046,8 +2047,10 @@ static void mv_eng_timeout(struct ata_port *ap) ap->host_set->mmio_base, ap, qc, qc->scsicmd, &qc->scsicmd->cmnd); + spin_lock_irqsave(&ap->host_set->lock, flags); mv_err_intr(ap, 0); mv_stop_and_reset(ap); + spin_unlock_irqrestore(&ap->host_set->lock, flags); WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); if (qc->flags & ATA_QCFLAG_ACTIVE) { -- cgit v1.2.2