From f367bed005b06db7067fc378a5f2253fac54e5d9 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 29 Mar 2008 19:48:21 +0100 Subject: Revert "ide: change master/slave IDENTIFY order" This reverts commit b140b99c413ce410197cfcd4014e757cd745226a. [ conflict in drivers/ide/ide-probe.c fixed manually ] It turned out that probing order change causes problems for some drives: http://bugzilla.kernel.org/show_bug.cgi?id=10239 Since root causes are still being investigated and are unlikely to be fixed before 2.6.25 lets revert this change for now. As a result cable detection becomes less reliable when compared with 2.6.24 but the affected drives are useable again. Reported-by: Richard Genoud Bisected-by: Richard Genoud Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 1 + drivers/ide/ide-probe.c | 5 +++-- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index c419266234a7..01b92208f09d 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -595,6 +595,7 @@ u8 eighty_ninty_three (ide_drive_t *drive) /* * FIXME: + * - change master/slave IDENTIFY order * - force bit13 (80c cable present) check also for !ivb devices * (unless the slave device is pre-ATA3) */ diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 194ecb0049eb..47a114927c31 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -774,9 +774,10 @@ static int ide_probe_port(ide_hwif_t *hwif) printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name); /* - * Need to probe slave device first to make it release PDIAG-. + * Second drive should only exist if first drive was found, + * but a lot of cdrom drives are configured as single slaves. */ - for (unit = MAX_DRIVES - 1; unit >= 0; unit--) { + for (unit = 0; unit < MAX_DRIVES; ++unit) { ide_drive_t *drive = &hwif->drives[unit]; drive->dn = (hwif->channel ? 2 : 0) + unit; (void) probe_for_drive(drive); -- cgit v1.2.2