From 8fa89bf5de066b11190ac804903021700c2b1185 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 14 Jul 2008 22:56:55 +0200 Subject: mv643xx_eth: fix TX hang erratum workaround The previously merged TX hang erratum workaround ("mv643xx_eth: work around TX hang hardware issue") assumes that TX_END interrupts are delivered simultaneously with or after their corresponding TX interrupts, but this is not always true in practise. In particular, it appears that TX_END interrupts are issued as soon as descriptor fetch returns an invalid descriptor, which may happen before earlier descriptors have been fully transmitted and written back to memory as being done. This hardware behavior can lead to a situation where the current driver code mistakenly assumes that the MAC has given up transmitting before noticing the packets that it is in fact still currently working on, causing the driver to re-kick the transmit queue, which will only cause the MAC to re-fetch the invalid head descriptor, and generate another TX_END interrupt, et cetera, until the packets in the pipe finally finish transmitting and have their descriptors written back to memory, which will then finally break the loop. Fix this by having the erratum workaround not check the 'number of unfinished descriptor', but instead, to compare the software's idea of what the head descriptor pointer should be to the hardware's head descriptor pointer (which is updated on the same conditions as the TX_END interupt is generated on, i.e. possibly before all previous descriptors have been transmitted and written back). Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 41 +++++++++++++++++++++++++++++------------ 1 file changed, 29 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 8a97a0066a88..910920e21259 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -96,6 +96,7 @@ static char mv643xx_eth_driver_version[] = "1.1"; #define TX_BW_MTU(p) (0x0458 + ((p) << 10)) #define TX_BW_BURST(p) (0x045c + ((p) << 10)) #define INT_CAUSE(p) (0x0460 + ((p) << 10)) +#define INT_TX_END_0 0x00080000 #define INT_TX_END 0x07f80000 #define INT_RX 0x0007fbfc #define INT_EXT 0x00000002 @@ -706,6 +707,7 @@ static inline __be16 sum16_as_be(__sum16 sum) static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb) { + struct mv643xx_eth_private *mp = txq_to_mp(txq); int nr_frags = skb_shinfo(skb)->nr_frags; int tx_index; struct tx_desc *desc; @@ -759,6 +761,10 @@ static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb) wmb(); desc->cmd_sts = cmd_sts; + /* clear TX_END interrupt status */ + wrl(mp, INT_CAUSE(mp->port_num), ~(INT_TX_END_0 << txq->index)); + rdl(mp, INT_CAUSE(mp->port_num)); + /* ensure all descriptors are written before poking hardware */ wmb(); txq_enable(txq); @@ -1684,7 +1690,6 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) struct mv643xx_eth_private *mp = netdev_priv(dev); u32 int_cause; u32 int_cause_ext; - u32 txq_active; int_cause = rdl(mp, INT_CAUSE(mp->port_num)) & (INT_TX_END | INT_RX | INT_EXT); @@ -1743,8 +1748,6 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) } #endif - txq_active = rdl(mp, TXQ_COMMAND(mp->port_num)); - /* * TxBuffer or TxError set for any of the 8 queues? */ @@ -1754,6 +1757,14 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) for (i = 0; i < 8; i++) if (mp->txq_mask & (1 << i)) txq_reclaim(mp->txq + i, 0); + + /* + * Enough space again in the primary TX queue for a + * full packet? + */ + spin_lock(&mp->lock); + __txq_maybe_wake(mp->txq + mp->txq_primary); + spin_unlock(&mp->lock); } /* @@ -1763,19 +1774,25 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) int i; wrl(mp, INT_CAUSE(mp->port_num), ~(int_cause & INT_TX_END)); + + spin_lock(&mp->lock); for (i = 0; i < 8; i++) { struct tx_queue *txq = mp->txq + i; - if (txq->tx_desc_count && !((txq_active >> i) & 1)) + u32 hw_desc_ptr; + u32 expected_ptr; + + if ((int_cause & (INT_TX_END_0 << i)) == 0) + continue; + + hw_desc_ptr = + rdl(mp, TXQ_CURRENT_DESC_PTR(mp->port_num, i)); + expected_ptr = (u32)txq->tx_desc_dma + + txq->tx_curr_desc * sizeof(struct tx_desc); + + if (hw_desc_ptr != expected_ptr) txq_enable(txq); } - } - - /* - * Enough space again in the primary TX queue for a full packet? - */ - if (int_cause_ext & INT_EXT_TX) { - struct tx_queue *txq = mp->txq + mp->txq_primary; - __txq_maybe_wake(txq); + spin_unlock(&mp->lock); } return IRQ_HANDLED; -- cgit v1.2.2 From 6b368f6859c80343e5d7c6e2a7c49df0a8a273c1 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Fri, 11 Jul 2008 19:38:34 +0200 Subject: mv643xx_eth: prevent breakage when link goes down during transmit When the ethernet link goes down while mv643xx_eth is transmitting data, transmit DMA can stop before all queued transmit descriptors have been processed. But even the descriptors that _have_ been processed might not be properly marked as done before the transmit DMA unit shuts down. Then when the link comes up again, the hardware transmit pointer might have advanced while not all previous packet descriptors have been marked as transmitted, causing software transmit reclaim to hang waiting for the hardware to finish transmitting a descriptor that it has already skipped. This patch forcibly reclaims all packets on the transmit ring on a link down interrupt, and then resyncs the hardware transmit pointer to what the software's idea of the first free descriptor is. Also, we need to prevent re-waking the transmit queue if we get a 'transmit done' interrupt at the same time as a 'link down' interrupt, which this patch does as well. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 57 +++++++++++++++++++++++++++++++---------------- 1 file changed, 38 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 910920e21259..d7620c50efb1 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -405,6 +405,17 @@ static void rxq_disable(struct rx_queue *rxq) udelay(10); } +static void txq_reset_hw_ptr(struct tx_queue *txq) +{ + struct mv643xx_eth_private *mp = txq_to_mp(txq); + int off = TXQ_CURRENT_DESC_PTR(mp->port_num, txq->index); + u32 addr; + + addr = (u32)txq->tx_desc_dma; + addr += txq->tx_curr_desc * sizeof(struct tx_desc); + wrl(mp, off, addr); +} + static void txq_enable(struct tx_queue *txq) { struct mv643xx_eth_private *mp = txq_to_mp(txq); @@ -1545,8 +1556,11 @@ static int txq_init(struct mv643xx_eth_private *mp, int index) tx_desc = (struct tx_desc *)txq->tx_desc_area; for (i = 0; i < txq->tx_ring_size; i++) { + struct tx_desc *txd = tx_desc + i; int nexti = (i + 1) % txq->tx_ring_size; - tx_desc[i].next_desc_ptr = txq->tx_desc_dma + + + txd->cmd_sts = 0; + txd->next_desc_ptr = txq->tx_desc_dma + nexti * sizeof(struct tx_desc); } @@ -1583,8 +1597,11 @@ static void txq_reclaim(struct tx_queue *txq, int force) desc = &txq->tx_desc_area[tx_index]; cmd_sts = desc->cmd_sts; - if (!force && (cmd_sts & BUFFER_OWNED_BY_DMA)) - break; + if (cmd_sts & BUFFER_OWNED_BY_DMA) { + if (!force) + break; + desc->cmd_sts = cmd_sts & ~BUFFER_OWNED_BY_DMA; + } txq->tx_used_desc = (tx_index + 1) % txq->tx_ring_size; txq->tx_desc_count--; @@ -1705,8 +1722,6 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK)) { if (mp->phy_addr == -1 || mii_link_ok(&mp->mii)) { - int i; - if (mp->phy_addr != -1) { struct ethtool_cmd cmd; @@ -1714,17 +1729,24 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) update_pscr(mp, cmd.speed, cmd.duplex); } - for (i = 0; i < 8; i++) - if (mp->txq_mask & (1 << i)) - txq_enable(mp->txq + i); - if (!netif_carrier_ok(dev)) { netif_carrier_on(dev); - __txq_maybe_wake(mp->txq + mp->txq_primary); + netif_wake_queue(dev); } } else if (netif_carrier_ok(dev)) { + int i; + netif_stop_queue(dev); netif_carrier_off(dev); + + for (i = 0; i < 8; i++) { + struct tx_queue *txq = mp->txq + i; + + if (mp->txq_mask & (1 << i)) { + txq_reclaim(txq, 1); + txq_reset_hw_ptr(txq); + } + } } } @@ -1762,9 +1784,11 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) * Enough space again in the primary TX queue for a * full packet? */ - spin_lock(&mp->lock); - __txq_maybe_wake(mp->txq + mp->txq_primary); - spin_unlock(&mp->lock); + if (netif_carrier_ok(dev)) { + spin_lock(&mp->lock); + __txq_maybe_wake(mp->txq + mp->txq_primary); + spin_unlock(&mp->lock); + } } /* @@ -1851,16 +1875,11 @@ static void port_start(struct mv643xx_eth_private *mp) tx_set_rate(mp, 1000000000, 16777216); for (i = 0; i < 8; i++) { struct tx_queue *txq = mp->txq + i; - int off = TXQ_CURRENT_DESC_PTR(mp->port_num, i); - u32 addr; if ((mp->txq_mask & (1 << i)) == 0) continue; - addr = (u32)txq->tx_desc_dma; - addr += txq->tx_curr_desc * sizeof(struct tx_desc); - wrl(mp, off, addr); - + txq_reset_hw_ptr(txq); txq_set_rate(txq, 1000000000, 16777216); txq_set_fixed_prio_mode(txq); } -- cgit v1.2.2 From 4dfc1c87af46f9d8abf2ef78a4e22891d7a564c3 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 15 Jul 2008 13:34:51 +0200 Subject: mv643xx_eth: fix transmit-reclaim-in-napi-poll The mv643xx_eth driver allows doing transmit reclaim from within the napi poll routine, but after doing reclaim, it would forget to check the free transmit descriptor count and wake up the transmit queue if the reclaim caused enough descriptors for a new packet to become available. This would cause the netdev watchdog to occasionally kick in during certain workloads with combined receive and transmit traffic. Fix this by adding a wakeup check identical to the one in the interrupt handler to the napi poll routine. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index d7620c50efb1..3211369a4320 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -626,6 +626,12 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) for (i = 0; i < 8; i++) if (mp->txq_mask & (1 << i)) txq_reclaim(mp->txq + i, 0); + + if (netif_carrier_ok(mp->dev)) { + spin_lock(&mp->lock); + __txq_maybe_wake(mp->txq + mp->txq_primary); + spin_unlock(&mp->lock); + } } #endif -- cgit v1.2.2 From 65193a91fc60fdb79e392c9842c10552a1fa3e1c Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Fri, 11 Jul 2008 00:39:41 +0200 Subject: mv643xx_eth: don't fiddle with maximum receive packet size setting The maximum receive packet size field in the Port Serial Control register controls at what size received packets are flagged overlength in the receive descriptor, but it doesn't prevent overlength packets from being DMAd to memory and signaled to the host like other received packets. mv643xx_eth does not support receiving jumbo frames in 10/100 mode, but setting the packet threshold to larger than 1522 bytes in 10/100 mode won't cause breakage by itself. If we really want to enforce maximum packet size on the receiving end instead of on the sending end where it should be done, we can always just add a length check to the software receive handler instead of relying on the hardware to do the comparison for us. What's more, changing the maximum packet size field requires temporarily disabling the RX/TX paths. So once the link comes up in 10/100 Mb/s mode or 1000 Mb/s mode, we'd have to disable it again just to set the right maximum packet size field (1522 in 10/100 Mb/s mode or 9700 in 1000 Mb/s mode), just so that we can offload one comparison operation to hardware that we might as well do in software, assuming that we'd want to do it at all. Contrary to what the documentation suggests, there is no harm in just setting a 9700 byte maximum packet size in 10/100 mode, so use the maximum maximum packet size for all modes. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 3211369a4320..207d4391a6de 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -154,7 +154,6 @@ static char mv643xx_eth_driver_version[] = "1.1"; #define SET_MII_SPEED_TO_100 (1 << 24) #define SET_GMII_SPEED_TO_1000 (1 << 23) #define SET_FULL_DUPLEX_MODE (1 << 21) -#define MAX_RX_PACKET_1522BYTE (1 << 17) #define MAX_RX_PACKET_9700BYTE (5 << 17) #define MAX_RX_PACKET_MASK (7 << 17) #define DISABLE_AUTO_NEG_SPEED_GMII (1 << 13) @@ -1674,13 +1673,12 @@ static void update_pscr(struct mv643xx_eth_private *mp, int speed, int duplex) SET_FULL_DUPLEX_MODE | MAX_RX_PACKET_MASK); - if (speed == SPEED_1000) { - pscr_n |= SET_GMII_SPEED_TO_1000 | MAX_RX_PACKET_9700BYTE; - } else { - if (speed == SPEED_100) - pscr_n |= SET_MII_SPEED_TO_100; - pscr_n |= MAX_RX_PACKET_1522BYTE; - } + pscr_n |= MAX_RX_PACKET_9700BYTE; + + if (speed == SPEED_1000) + pscr_n |= SET_GMII_SPEED_TO_1000; + else if (speed == SPEED_100) + pscr_n |= SET_MII_SPEED_TO_100; if (duplex == DUPLEX_FULL) pscr_n |= SET_FULL_DUPLEX_MODE; -- cgit v1.2.2 From ae9ae06443f7bfa4f013c0e2c035d549e999ad3e Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 15 Jul 2008 02:15:24 +0200 Subject: mv643xx_eth: also check TX_IN_PROGRESS when disabling transmit path The recommended sequence for waiting for the transmit path to clear after disabling all of the transmit queues is to wait for the TX_FIFO_EMPTY bit in the Port Status register to become set as well as the TX_IN_PROGRESS bit to clear. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 207d4391a6de..c700c1f494e9 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -90,6 +90,7 @@ static char mv643xx_eth_driver_version[] = "1.1"; #define PORT_SERIAL_CONTROL(p) (0x043c + ((p) << 10)) #define PORT_STATUS(p) (0x0444 + ((p) << 10)) #define TX_FIFO_EMPTY 0x00000400 +#define TX_IN_PROGRESS 0x00000080 #define TXQ_COMMAND(p) (0x0448 + ((p) << 10)) #define TXQ_FIX_PRIO_CONF(p) (0x044c + ((p) << 10)) #define TX_BW_RATE(p) (0x0450 + ((p) << 10)) @@ -2039,8 +2040,14 @@ static void port_reset(struct mv643xx_eth_private *mp) if (mp->txq_mask & (1 << i)) txq_disable(mp->txq + i); } - while (!(rdl(mp, PORT_STATUS(mp->port_num)) & TX_FIFO_EMPTY)) + + while (1) { + u32 ps = rdl(mp, PORT_STATUS(mp->port_num)); + + if ((ps & (TX_IN_PROGRESS | TX_FIFO_EMPTY)) == TX_FIFO_EMPTY) + break; udelay(10); + } /* Reset the Enable bit in the Configuration Register */ data = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num)); -- cgit v1.2.2 From cd4ccf76bfd2c36d351e68be7e6a597268f98a1a Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 10 Jul 2008 14:40:51 +0200 Subject: mv643xx_eth: use longer DMA bursts The mv643xx_eth driver is limiting DMA bursts to 32 bytes, while using the largest burst size (128 bytes) gives a couple percentage points performance improvement in throughput tests, and the docs say that the 128 byte default should not need to be changed, so use 128 byte bursts instead. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index c700c1f494e9..9d200568d88a 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -129,21 +129,21 @@ static char mv643xx_eth_driver_version[] = "1.1"; /* * SDMA configuration register. */ -#define RX_BURST_SIZE_4_64BIT (2 << 1) +#define RX_BURST_SIZE_16_64BIT (4 << 1) #define BLM_RX_NO_SWAP (1 << 4) #define BLM_TX_NO_SWAP (1 << 5) -#define TX_BURST_SIZE_4_64BIT (2 << 22) +#define TX_BURST_SIZE_16_64BIT (4 << 22) #if defined(__BIG_ENDIAN) #define PORT_SDMA_CONFIG_DEFAULT_VALUE \ - RX_BURST_SIZE_4_64BIT | \ - TX_BURST_SIZE_4_64BIT + RX_BURST_SIZE_16_64BIT | \ + TX_BURST_SIZE_16_64BIT #elif defined(__LITTLE_ENDIAN) #define PORT_SDMA_CONFIG_DEFAULT_VALUE \ - RX_BURST_SIZE_4_64BIT | \ + RX_BURST_SIZE_16_64BIT | \ BLM_RX_NO_SWAP | \ BLM_TX_NO_SWAP | \ - TX_BURST_SIZE_4_64BIT + TX_BURST_SIZE_16_64BIT #else #error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined #endif -- cgit v1.2.2 From 7f106c1d050c085c84d148ba56293e60b2c4e756 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 15 Jul 2008 02:28:47 +0200 Subject: mv643xx_eth: use symbolic MII register addresses and values Instead of hardcoding MII register addresses and values, use the symbolic constants defined in linux/mii.h. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 9d200568d88a..5bed6b33c7bc 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -1831,14 +1831,14 @@ static void phy_reset(struct mv643xx_eth_private *mp) { unsigned int data; - smi_reg_read(mp, mp->phy_addr, 0, &data); - data |= 0x8000; - smi_reg_write(mp, mp->phy_addr, 0, data); + smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data); + data |= BMCR_RESET; + smi_reg_write(mp, mp->phy_addr, MII_BMCR, data); do { udelay(1); - smi_reg_read(mp, mp->phy_addr, 0, &data); - } while (data & 0x8000); + smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data); + } while (data & BMCR_RESET); } static void port_start(struct mv643xx_eth_private *mp) @@ -2385,14 +2385,14 @@ static int phy_detect(struct mv643xx_eth_private *mp) unsigned int data; unsigned int data2; - smi_reg_read(mp, mp->phy_addr, 0, &data); - smi_reg_write(mp, mp->phy_addr, 0, data ^ 0x1000); + smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data); + smi_reg_write(mp, mp->phy_addr, MII_BMCR, data ^ BMCR_ANENABLE); - smi_reg_read(mp, mp->phy_addr, 0, &data2); - if (((data ^ data2) & 0x1000) == 0) + smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data2); + if (((data ^ data2) & BMCR_ANENABLE) == 0) return -ENODEV; - smi_reg_write(mp, mp->phy_addr, 0, data); + smi_reg_write(mp, mp->phy_addr, MII_BMCR, data); return 0; } -- cgit v1.2.2 From 7dde154d3d0d9701ecfb5533017a8f1a20bb4214 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 15 Jul 2008 12:20:30 +0200 Subject: mv643xx_eth: print driver version on init Print the mv643xx_eth driver version on init to help debugging. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 5bed6b33c7bc..006ad45ddb84 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -2249,7 +2249,8 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev) int ret; if (!mv643xx_eth_version_printed++) - printk(KERN_NOTICE "MV-643xx 10/100/1000 Ethernet Driver\n"); + printk(KERN_NOTICE "MV-643xx 10/100/1000 ethernet " + "driver version %s\n", mv643xx_eth_driver_version); ret = -EINVAL; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- cgit v1.2.2 From 81600eea98789da09a32de69ca9d3be8b9503c54 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 14 Jul 2008 14:29:40 +0200 Subject: mv643xx_eth: use auto phy polling for configuring (R)(G)MII interface The mv643xx_eth hardware has a provision for polling the PHY's MII management registers to obtain the (R)(G)MII interface speed (10/100/1000) and duplex (half/full) and pause (off/symmetric) settings to use to talk to the PHY. The driver currently does not make use of this feature. Instead, whenever there is a link status change event, it reads the current link parameters from the PHY, and programs those parameters into the mv643xx_eth MAC by hand. This patch switches the mv643xx_eth driver to letting the MAC auto-determine the (R)(G)MII link parameters by PHY polling, if there is a PHY present. For PHYless ports (when e.g. the (R)(G)MII interface is connected to a hardware switch), we keep hardcoding the MII interface parameters. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 140 ++++++++++++++++++++++------------------------ 1 file changed, 66 insertions(+), 74 deletions(-) (limited to 'drivers') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 006ad45ddb84..29d4fe37cd50 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -91,6 +91,7 @@ static char mv643xx_eth_driver_version[] = "1.1"; #define PORT_STATUS(p) (0x0444 + ((p) << 10)) #define TX_FIFO_EMPTY 0x00000400 #define TX_IN_PROGRESS 0x00000080 +#define LINK_UP 0x00000002 #define TXQ_COMMAND(p) (0x0448 + ((p) << 10)) #define TXQ_FIX_PRIO_CONF(p) (0x044c + ((p) << 10)) #define TX_BW_RATE(p) (0x0450 + ((p) << 10)) @@ -156,7 +157,6 @@ static char mv643xx_eth_driver_version[] = "1.1"; #define SET_GMII_SPEED_TO_1000 (1 << 23) #define SET_FULL_DUPLEX_MODE (1 << 21) #define MAX_RX_PACKET_9700BYTE (5 << 17) -#define MAX_RX_PACKET_MASK (7 << 17) #define DISABLE_AUTO_NEG_SPEED_GMII (1 << 13) #define DO_NOT_FORCE_LINK_FAIL (1 << 10) #define SERIAL_PORT_CONTROL_RESERVED (1 << 9) @@ -1135,10 +1135,28 @@ static int mv643xx_eth_get_settings(struct net_device *dev, struct ethtool_cmd * static int mv643xx_eth_get_settings_phyless(struct net_device *dev, struct ethtool_cmd *cmd) { + struct mv643xx_eth_private *mp = netdev_priv(dev); + u32 port_status; + + port_status = rdl(mp, PORT_STATUS(mp->port_num)); + cmd->supported = SUPPORTED_MII; cmd->advertising = ADVERTISED_MII; - cmd->speed = SPEED_1000; - cmd->duplex = DUPLEX_FULL; + switch (port_status & PORT_SPEED_MASK) { + case PORT_SPEED_10: + cmd->speed = SPEED_10; + break; + case PORT_SPEED_100: + cmd->speed = SPEED_100; + break; + case PORT_SPEED_1000: + cmd->speed = SPEED_1000; + break; + default: + cmd->speed = -1; + break; + } + cmd->duplex = (port_status & FULL_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF; cmd->port = PORT_MII; cmd->phy_address = 0; cmd->transceiver = XCVR_INTERNAL; @@ -1661,51 +1679,6 @@ static void txq_deinit(struct tx_queue *txq) /* netdev ops and related ***************************************************/ -static void update_pscr(struct mv643xx_eth_private *mp, int speed, int duplex) -{ - u32 pscr_o; - u32 pscr_n; - - pscr_o = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num)); - - /* clear speed, duplex and rx buffer size fields */ - pscr_n = pscr_o & ~(SET_MII_SPEED_TO_100 | - SET_GMII_SPEED_TO_1000 | - SET_FULL_DUPLEX_MODE | - MAX_RX_PACKET_MASK); - - pscr_n |= MAX_RX_PACKET_9700BYTE; - - if (speed == SPEED_1000) - pscr_n |= SET_GMII_SPEED_TO_1000; - else if (speed == SPEED_100) - pscr_n |= SET_MII_SPEED_TO_100; - - if (duplex == DUPLEX_FULL) - pscr_n |= SET_FULL_DUPLEX_MODE; - - if (pscr_n != pscr_o) { - if ((pscr_o & SERIAL_PORT_ENABLE) == 0) - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n); - else { - int i; - - for (i = 0; i < 8; i++) - if (mp->txq_mask & (1 << i)) - txq_disable(mp->txq + i); - - pscr_o &= ~SERIAL_PORT_ENABLE; - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_o); - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n); - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n); - - for (i = 0; i < 8; i++) - if (mp->txq_mask & (1 << i)) - txq_enable(mp->txq + i); - } - } -} - static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) { struct net_device *dev = (struct net_device *)dev_id; @@ -1726,14 +1699,7 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) } if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK)) { - if (mp->phy_addr == -1 || mii_link_ok(&mp->mii)) { - if (mp->phy_addr != -1) { - struct ethtool_cmd cmd; - - mii_ethtool_gset(&mp->mii, &cmd); - update_pscr(mp, cmd.speed, cmd.duplex); - } - + if (rdl(mp, PORT_STATUS(mp->port_num)) & LINK_UP) { if (!netif_carrier_ok(dev)) { netif_carrier_on(dev); netif_wake_queue(dev); @@ -1846,23 +1812,6 @@ static void port_start(struct mv643xx_eth_private *mp) u32 pscr; int i; - /* - * Configure basic link parameters. - */ - pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num)); - pscr &= ~(SERIAL_PORT_ENABLE | FORCE_LINK_PASS); - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); - pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL | - DISABLE_AUTO_NEG_SPEED_GMII | - DISABLE_AUTO_NEG_FOR_DUPLEX | - DO_NOT_FORCE_LINK_FAIL | - SERIAL_PORT_CONTROL_RESERVED; - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); - pscr |= SERIAL_PORT_ENABLE; - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); - - wrl(mp, SDMA_CONFIG(mp->port_num), PORT_SDMA_CONFIG_DEFAULT_VALUE); - /* * Perform PHY reset, if there is a PHY. */ @@ -1874,6 +1823,21 @@ static void port_start(struct mv643xx_eth_private *mp) mv643xx_eth_set_settings(mp->dev, &cmd); } + /* + * Configure basic link parameters. + */ + pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num)); + + pscr |= SERIAL_PORT_ENABLE; + wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); + + pscr |= DO_NOT_FORCE_LINK_FAIL; + if (mp->phy_addr == -1) + pscr |= FORCE_LINK_PASS; + wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); + + wrl(mp, SDMA_CONFIG(mp->port_num), PORT_SDMA_CONFIG_DEFAULT_VALUE); + /* * Configure TX path and queues. */ @@ -2441,12 +2405,39 @@ static int phy_init(struct mv643xx_eth_private *mp, cmd.duplex = pd->duplex; } - update_pscr(mp, cmd.speed, cmd.duplex); mv643xx_eth_set_settings(mp->dev, &cmd); return 0; } +static void init_pscr(struct mv643xx_eth_private *mp, int speed, int duplex) +{ + u32 pscr; + + pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num)); + if (pscr & SERIAL_PORT_ENABLE) { + pscr &= ~SERIAL_PORT_ENABLE; + wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); + } + + pscr = MAX_RX_PACKET_9700BYTE | SERIAL_PORT_CONTROL_RESERVED; + if (mp->phy_addr == -1) { + pscr |= DISABLE_AUTO_NEG_SPEED_GMII; + if (speed == SPEED_1000) + pscr |= SET_GMII_SPEED_TO_1000; + else if (speed == SPEED_100) + pscr |= SET_MII_SPEED_TO_100; + + pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL; + + pscr |= DISABLE_AUTO_NEG_FOR_DUPLEX; + if (duplex == DUPLEX_FULL) + pscr |= SET_FULL_DUPLEX_MODE; + } + + wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); +} + static int mv643xx_eth_probe(struct platform_device *pdev) { struct mv643xx_eth_platform_data *pd; @@ -2500,6 +2491,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev) } else { SET_ETHTOOL_OPS(dev, &mv643xx_eth_ethtool_ops_phyless); } + init_pscr(mp, pd->speed, pd->duplex); res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); -- cgit v1.2.2 From 2f7eb47a7b9f703d4f7dfdab358df6ff1f2a2204 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 24 Jul 2008 06:22:59 +0200 Subject: mv643xx_eth: print message on link status change When there is a link status change (link or phy status interrupt), print a message notifying the user of the new link status. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 91 +++++++++++++++++++++++++++++++++++------------ 1 file changed, 69 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 29d4fe37cd50..01dd3c505d25 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -91,6 +91,12 @@ static char mv643xx_eth_driver_version[] = "1.1"; #define PORT_STATUS(p) (0x0444 + ((p) << 10)) #define TX_FIFO_EMPTY 0x00000400 #define TX_IN_PROGRESS 0x00000080 +#define PORT_SPEED_MASK 0x00000030 +#define PORT_SPEED_1000 0x00000010 +#define PORT_SPEED_100 0x00000020 +#define PORT_SPEED_10 0x00000000 +#define FLOW_CONTROL_ENABLED 0x00000008 +#define FULL_DUPLEX 0x00000004 #define LINK_UP 0x00000002 #define TXQ_COMMAND(p) (0x0448 + ((p) << 10)) #define TXQ_FIX_PRIO_CONF(p) (0x044c + ((p) << 10)) @@ -1679,6 +1685,64 @@ static void txq_deinit(struct tx_queue *txq) /* netdev ops and related ***************************************************/ +static void handle_link_event(struct mv643xx_eth_private *mp) +{ + struct net_device *dev = mp->dev; + u32 port_status; + int speed; + int duplex; + int fc; + + port_status = rdl(mp, PORT_STATUS(mp->port_num)); + if (!(port_status & LINK_UP)) { + if (netif_carrier_ok(dev)) { + int i; + + printk(KERN_INFO "%s: link down\n", dev->name); + + netif_carrier_off(dev); + netif_stop_queue(dev); + + for (i = 0; i < 8; i++) { + struct tx_queue *txq = mp->txq + i; + + if (mp->txq_mask & (1 << i)) { + txq_reclaim(txq, 1); + txq_reset_hw_ptr(txq); + } + } + } + return; + } + + switch (port_status & PORT_SPEED_MASK) { + case PORT_SPEED_10: + speed = 10; + break; + case PORT_SPEED_100: + speed = 100; + break; + case PORT_SPEED_1000: + speed = 1000; + break; + default: + speed = -1; + break; + } + duplex = (port_status & FULL_DUPLEX) ? 1 : 0; + fc = (port_status & FLOW_CONTROL_ENABLED) ? 1 : 0; + + printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, " + "flow control %sabled\n", dev->name, + speed, duplex ? "full" : "half", + fc ? "en" : "dis"); + + if (!netif_carrier_ok(dev)) { + netif_carrier_on(dev); + netif_wake_queue(dev); + } +} + static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) { struct net_device *dev = (struct net_device *)dev_id; @@ -1698,28 +1762,8 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) wrl(mp, INT_CAUSE_EXT(mp->port_num), ~int_cause_ext); } - if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK)) { - if (rdl(mp, PORT_STATUS(mp->port_num)) & LINK_UP) { - if (!netif_carrier_ok(dev)) { - netif_carrier_on(dev); - netif_wake_queue(dev); - } - } else if (netif_carrier_ok(dev)) { - int i; - - netif_stop_queue(dev); - netif_carrier_off(dev); - - for (i = 0; i < 8; i++) { - struct tx_queue *txq = mp->txq + i; - - if (mp->txq_mask & (1 << i)) { - txq_reclaim(txq, 1); - txq_reset_hw_ptr(txq); - } - } - } - } + if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK)) + handle_link_event(mp); /* * RxBuffer or RxError set for any of the 8 queues? @@ -1970,6 +2014,9 @@ static int mv643xx_eth_open(struct net_device *dev) napi_enable(&mp->napi); #endif + netif_carrier_off(dev); + netif_stop_queue(dev); + port_start(mp); set_rx_coal(mp, 0); -- cgit v1.2.2 From e32b66175072d75bde1ddca4227a6723ca17e0af Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 24 Jul 2008 06:22:59 +0200 Subject: mv643xx_eth: enable hardware TX checksumming with vlan tags Although mv643xx_eth has no hardware support for inserting a vlan tag by twiddling some bits in the TX descriptor, it does support hardware TX checksumming on packets where the IP header starts {a limited set of values other than 14} bytes into the packet. This patch sets mv643xx_eth's ->vlan_features to NETIF_F_SG | NETIF_F_IP_CSUM, which prevents the stack from checksumming vlan'ed packets in software, and if vlan tags are present on a transmitted packet, notifies the hardware of this fact by toggling the right bits in the TX descriptor. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 01dd3c505d25..88bb1f1e8065 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -235,6 +235,8 @@ struct tx_desc { #define GEN_IP_V4_CHECKSUM 0x00040000 #define GEN_TCP_UDP_CHECKSUM 0x00020000 #define UDP_FRAME 0x00010000 +#define MAC_HDR_EXTRA_4_BYTES 0x00008000 +#define MAC_HDR_EXTRA_8_BYTES 0x00000200 #define TX_IHL_SHIFT 11 @@ -757,12 +759,36 @@ static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb) desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE); if (skb->ip_summed == CHECKSUM_PARTIAL) { - BUG_ON(skb->protocol != htons(ETH_P_IP)); + int mac_hdr_len; + + BUG_ON(skb->protocol != htons(ETH_P_IP) && + skb->protocol != htons(ETH_P_8021Q)); cmd_sts |= GEN_TCP_UDP_CHECKSUM | GEN_IP_V4_CHECKSUM | ip_hdr(skb)->ihl << TX_IHL_SHIFT; + mac_hdr_len = (void *)ip_hdr(skb) - (void *)skb->data; + switch (mac_hdr_len - ETH_HLEN) { + case 0: + break; + case 4: + cmd_sts |= MAC_HDR_EXTRA_4_BYTES; + break; + case 8: + cmd_sts |= MAC_HDR_EXTRA_8_BYTES; + break; + case 12: + cmd_sts |= MAC_HDR_EXTRA_4_BYTES; + cmd_sts |= MAC_HDR_EXTRA_8_BYTES; + break; + default: + if (net_ratelimit()) + dev_printk(KERN_ERR, &txq_to_mp(txq)->dev->dev, + "mac header length is %d?!\n", mac_hdr_len); + break; + } + switch (ip_hdr(skb)->protocol) { case IPPROTO_UDP: cmd_sts |= UDP_FRAME; @@ -2565,6 +2591,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev) * have to map the buffers to ISA memory which is only 16 MB */ dev->features = NETIF_F_SG | NETIF_F_IP_CSUM; + dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM; #endif SET_NETDEV_DEV(dev, &pdev->dev); -- cgit v1.2.2 From ac0a2d0c8ab18045ab217339a71e76c76e186ede Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 15 Jul 2008 12:26:16 +0200 Subject: mv643xx_eth: bump version to 1.2 Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 88bb1f1e8065..46819af3b062 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -55,7 +55,7 @@ #include static char mv643xx_eth_driver_name[] = "mv643xx_eth"; -static char mv643xx_eth_driver_version[] = "1.1"; +static char mv643xx_eth_driver_version[] = "1.2"; #define MV643XX_ETH_CHECKSUM_OFFLOAD_TX #define MV643XX_ETH_NAPI -- cgit v1.2.2 From 22ae03a190011fa2241e68a6c51369d78039348e Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Fri, 25 Jul 2008 15:31:29 -0400 Subject: forcedeth bug fix: realtek phy 8211c errata This patch adds support for the realtek 8211c phy. The driver must perform a hardware reset of the phy due to an errata where the phy could not detect the link. Signed-off-by: Ayaz Abdulla Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 64 ++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 58 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 4ed89fa9ae46..01b38b092c76 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -333,6 +333,7 @@ enum { NvRegPowerState2 = 0x600, #define NVREG_POWERSTATE2_POWERUP_MASK 0x0F11 #define NVREG_POWERSTATE2_POWERUP_REV_A3 0x0001 +#define NVREG_POWERSTATE2_PHY_RESET 0x0004 }; /* Big endian: should work, but is untested */ @@ -529,6 +530,7 @@ union ring_type { #define PHY_REALTEK_INIT_REG4 0x14 #define PHY_REALTEK_INIT_REG5 0x18 #define PHY_REALTEK_INIT_REG6 0x11 +#define PHY_REALTEK_INIT_REG7 0x01 #define PHY_REALTEK_INIT1 0x0000 #define PHY_REALTEK_INIT2 0x8e00 #define PHY_REALTEK_INIT3 0x0001 @@ -537,6 +539,9 @@ union ring_type { #define PHY_REALTEK_INIT6 0xf5c7 #define PHY_REALTEK_INIT7 0x1000 #define PHY_REALTEK_INIT8 0x0003 +#define PHY_REALTEK_INIT9 0x0008 +#define PHY_REALTEK_INIT10 0x0005 +#define PHY_REALTEK_INIT11 0x0200 #define PHY_REALTEK_INIT_MSK1 0x0003 #define PHY_GIGABIT 0x0100 @@ -1149,6 +1154,42 @@ static int phy_init(struct net_device *dev) return PHY_ERROR; } } + if (np->phy_model == PHY_MODEL_REALTEK_8211 && + np->phy_rev == PHY_REV_REALTEK_8211C) { + u32 powerstate = readl(base + NvRegPowerState2); + + /* need to perform hw phy reset */ + powerstate |= NVREG_POWERSTATE2_PHY_RESET; + writel(powerstate, base + NvRegPowerState2); + msleep(25); + + powerstate &= ~NVREG_POWERSTATE2_PHY_RESET; + writel(powerstate, base + NvRegPowerState2); + msleep(25); + + reg = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ); + reg |= PHY_REALTEK_INIT9; + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, reg)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT10)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + reg = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG7, MII_READ); + if (!(reg & PHY_REALTEK_INIT11)) { + reg |= PHY_REALTEK_INIT11; + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG7, reg)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + } + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + } if (np->phy_model == PHY_MODEL_REALTEK_8201) { if (np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_32 || np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_33 || @@ -1201,12 +1242,23 @@ static int phy_init(struct net_device *dev) mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ); mii_control |= BMCR_ANENABLE; - /* reset the phy - * (certain phys need bmcr to be setup with reset) - */ - if (phy_reset(dev, mii_control)) { - printk(KERN_INFO "%s: phy reset failed\n", pci_name(np->pci_dev)); - return PHY_ERROR; + if (np->phy_oui == PHY_OUI_REALTEK && + np->phy_model == PHY_MODEL_REALTEK_8211 && + np->phy_rev == PHY_REV_REALTEK_8211C) { + /* start autoneg since we already performed hw reset above */ + mii_control |= BMCR_ANRESTART; + if (mii_rw(dev, np->phyaddr, MII_BMCR, mii_control)) { + printk(KERN_INFO "%s: phy init failed\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + } else { + /* reset the phy + * (certain phys need bmcr to be setup with reset) + */ + if (phy_reset(dev, mii_control)) { + printk(KERN_INFO "%s: phy reset failed\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } } /* phy vendor specific configuration */ -- cgit v1.2.2 From d7b843d393cec677583e1aa971df09b140dcfd5e Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sun, 27 Jul 2008 22:45:03 +0800 Subject: Blackfin EMAC Driver: add proper __devinit/__devexit markings Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Jeff Garzik --- drivers/net/bfin_mac.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index a8ec60e1ed75..de777c28ec68 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -955,7 +955,7 @@ static int bfin_mac_close(struct net_device *dev) return 0; } -static int __init bfin_mac_probe(struct platform_device *pdev) +static int __devinit bfin_mac_probe(struct platform_device *pdev) { struct net_device *ndev; struct bfin_mac_local *lp; @@ -1081,7 +1081,7 @@ out_err_probe_mac: return rc; } -static int bfin_mac_remove(struct platform_device *pdev) +static int __devexit bfin_mac_remove(struct platform_device *pdev) { struct net_device *ndev = platform_get_drvdata(pdev); struct bfin_mac_local *lp = netdev_priv(ndev); @@ -1128,7 +1128,7 @@ static int bfin_mac_resume(struct platform_device *pdev) static struct platform_driver bfin_mac_driver = { .probe = bfin_mac_probe, - .remove = bfin_mac_remove, + .remove = __devexit_p(bfin_mac_remove), .resume = bfin_mac_resume, .suspend = bfin_mac_suspend, .driver = { -- cgit v1.2.2 From a50c0c05c3bdead1ac405ca8cefd8dc290043933 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Sun, 27 Jul 2008 22:45:04 +0800 Subject: Blackfin EMAC Driver: enable TXDWA new feature for new silicon (rev > 0.2) Signed-off-by: Bryan Wu Signed-off-by: Jeff Garzik --- drivers/net/bfin_mac.c | 103 ++++++++++++++++++++++++++++++++++++------------- 1 file changed, 77 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index de777c28ec68..ab728006cfa5 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -605,36 +605,87 @@ adjust_head: static int bfin_mac_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) { - unsigned int data; + u16 *data; current_tx_ptr->skb = skb; - /* - * Is skb->data always 16-bit aligned? - * Do we need to memcpy((char *)(tail->packet + 2), skb->data, len)? - */ - if ((((unsigned int)(skb->data)) & 0x02) == 2) { - /* move skb->data to current_tx_ptr payload */ - data = (unsigned int)(skb->data) - 2; - *((unsigned short *)data) = (unsigned short)(skb->len); - current_tx_ptr->desc_a.start_addr = (unsigned long)data; - /* this is important! */ - blackfin_dcache_flush_range(data, (data + (skb->len)) + 2); - + if (ANOMALY_05000285) { + /* + * TXDWA feature is not avaible to older revision < 0.3 silicon + * of BF537 + * + * Only if data buffer is ODD WORD alignment, we do not + * need to memcpy + */ + u32 data_align = (u32)(skb->data) & 0x3; + if (data_align == 0x2) { + /* move skb->data to current_tx_ptr payload */ + data = (u16 *)(skb->data) - 1; + *data = (u16)(skb->len); + current_tx_ptr->desc_a.start_addr = (u32)data; + /* this is important! */ + blackfin_dcache_flush_range((u32)data, + (u32)((u8 *)data + skb->len + 4)); + } else { + *((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len); + memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data, + skb->len); + current_tx_ptr->desc_a.start_addr = + (u32)current_tx_ptr->packet; + if (current_tx_ptr->status.status_word != 0) + current_tx_ptr->status.status_word = 0; + blackfin_dcache_flush_range( + (u32)current_tx_ptr->packet, + (u32)(current_tx_ptr->packet + skb->len + 2)); + } } else { - *((unsigned short *)(current_tx_ptr->packet)) = - (unsigned short)(skb->len); - memcpy((char *)(current_tx_ptr->packet + 2), skb->data, - (skb->len)); - current_tx_ptr->desc_a.start_addr = - (unsigned long)current_tx_ptr->packet; - if (current_tx_ptr->status.status_word != 0) - current_tx_ptr->status.status_word = 0; - blackfin_dcache_flush_range((unsigned int)current_tx_ptr-> - packet, - (unsigned int)(current_tx_ptr-> - packet + skb->len) + - 2); + /* + * TXDWA feature is avaible to revision < 0.3 silicon of + * BF537 and always avaible to BF52x + */ + u32 data_align = (u32)(skb->data) & 0x3; + if (data_align == 0x0) { + u16 sysctl = bfin_read_EMAC_SYSCTL(); + sysctl |= TXDWA; + bfin_write_EMAC_SYSCTL(sysctl); + + /* move skb->data to current_tx_ptr payload */ + data = (u16 *)(skb->data) - 2; + *data = (u16)(skb->len); + current_tx_ptr->desc_a.start_addr = (u32)data; + /* this is important! */ + blackfin_dcache_flush_range( + (u32)data, + (u32)((u8 *)data + skb->len + 4)); + } else if (data_align == 0x2) { + u16 sysctl = bfin_read_EMAC_SYSCTL(); + sysctl &= ~TXDWA; + bfin_write_EMAC_SYSCTL(sysctl); + + /* move skb->data to current_tx_ptr payload */ + data = (u16 *)(skb->data) - 1; + *data = (u16)(skb->len); + current_tx_ptr->desc_a.start_addr = (u32)data; + /* this is important! */ + blackfin_dcache_flush_range( + (u32)data, + (u32)((u8 *)data + skb->len + 4)); + } else { + u16 sysctl = bfin_read_EMAC_SYSCTL(); + sysctl &= ~TXDWA; + bfin_write_EMAC_SYSCTL(sysctl); + + *((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len); + memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data, + skb->len); + current_tx_ptr->desc_a.start_addr = + (u32)current_tx_ptr->packet; + if (current_tx_ptr->status.status_word != 0) + current_tx_ptr->status.status_word = 0; + blackfin_dcache_flush_range( + (u32)current_tx_ptr->packet, + (u32)(current_tx_ptr->packet + skb->len + 2)); + } } /* enable this packet's dma */ -- cgit v1.2.2 From ee02fee8f698aee72f43b3ee5fd818393b110402 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Sun, 27 Jul 2008 22:45:05 +0800 Subject: Blackfin EMAC Driver: Functional power management support Reprogram MAC address after resume from Suspend Mem (Blackfin Hibernate looses all CORE and SYSTEM register content) Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Jeff Garzik --- drivers/net/bfin_mac.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index ab728006cfa5..70c465db17c6 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -971,6 +971,7 @@ static int bfin_mac_open(struct net_device *dev) phy_start(lp->phydev); phy_write(lp->phydev, MII_BMCR, BMCR_RESET); setup_system_regs(dev); + setup_mac_addr(dev->dev_addr); bfin_mac_disable(); bfin_mac_enable(); pr_debug("hardware init finished\n"); -- cgit v1.2.2 From 8051367586314ab005dacead790a3b2e4e3dcc58 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Sat, 26 Jul 2008 15:40:56 -0500 Subject: cxgb3: Allow 64KB firmware images. Starting with FW version 7.0, the driver needs to allow larger images. Signed-off-by: Steve Wise Signed-off-by: Jeff Garzik --- drivers/net/cxgb3/t3_hw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 47d51788a462..04c0e90119af 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -683,7 +683,7 @@ enum { SF_ERASE_SECTOR = 0xd8, /* erase sector */ FW_FLASH_BOOT_ADDR = 0x70000, /* start address of FW in flash */ - FW_VERS_ADDR = 0x77ffc, /* flash address holding FW version */ + FW_VERS_ADDR = 0x7fffc, /* flash address holding FW version */ FW_MIN_SIZE = 8 /* at least version and csum */ }; -- cgit v1.2.2 From 74dfd9fb0ae390027cb5a908ab065a21158105d5 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 25 Jul 2008 11:46:46 -0700 Subject: blackfin_mac: unneeded assignment skb->dev is set by eth_type_trans already. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/bfin_mac.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 70c465db17c6..3db7db1828e7 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -742,7 +742,6 @@ static void bfin_mac_rx(struct net_device *dev) (unsigned long)skb->tail); dev->last_rx = jiffies; - skb->dev = dev; skb->protocol = eth_type_trans(skb, dev); #if defined(BFIN_MAC_CSUM_OFFLOAD) skb->csum = current_rx_ptr->status.ip_payload_csum; -- cgit v1.2.2 From c7b7b042068cd12b8b155722d24686f70b88ced1 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 24 Jul 2008 17:47:56 -0700 Subject: enc28j60: don't specify (wrong) IRQ type Recent changes to the IRQ framework have made passing the wrong trigger type to request_irq() become a fatal error. In the case of the enc28j60 driver, it stopped working in my test harness. (Specifically: the signal detects "pin change" events, both edges, not just falling edges. Similarly, other boards might route it through an inverter. Trigger type are board-specific.) This fixes that problem by the usual fix of expecting board setup code to have set up the correct IRQ trigger type. The best known example of that being x86 setup. Signed-off-by: David Brownell Signed-off-by: Jeff Garzik --- drivers/net/enc28j60.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index c05cb159c772..aa0bf6e1c694 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -1547,8 +1547,10 @@ static int __devinit enc28j60_probe(struct spi_device *spi) random_ether_addr(dev->dev_addr); enc28j60_set_hw_macaddr(dev); - ret = request_irq(spi->irq, enc28j60_irq, IRQF_TRIGGER_FALLING, - DRV_NAME, priv); + /* Board setup must set the relevant edge trigger type; + * level triggers won't currently work. + */ + ret = request_irq(spi->irq, enc28j60_irq, 0, DRV_NAME, priv); if (ret < 0) { if (netif_msg_probe(priv)) dev_err(&spi->dev, DRV_NAME ": request irq %d failed " -- cgit v1.2.2 From dc56e634c807c6be69be8af919f20a746197b87d Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Tue, 22 Jul 2008 16:27:20 -0300 Subject: S2io: fix statistics flush after a MTU change On s2io driver, when you change the interface MTU, it invokes a card reset, which flush some statistics. This patch solves this problem, and also set the net_device->stats as the default statistics structure, instead of s2io_nic->stats. To do that, s2io_nic->stats turned into a staging area, where is saved statistics of the last hardware statistics query. So, the difference between the current hardware statistics and s2io_nic->stats, is the value that should be summed up, in order to get the correct statistics value, even after a reset. Signed-off-by: Breno Leitao Signed-off-by: Jay Vosburgh Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 29 +++++++++++++++++++++++------ 1 file changed, 23 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 86d77d05190a..a2b073097e5c 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -3143,7 +3143,7 @@ static void tx_intr_handler(struct fifo_info *fifo_data) pkt_cnt++; /* Updating the statistics block */ - nic->stats.tx_bytes += skb->len; + nic->dev->stats.tx_bytes += skb->len; nic->mac_control.stats_info->sw_stat.mem_freed += skb->truesize; dev_kfree_skb_irq(skb); @@ -4896,25 +4896,42 @@ static struct net_device_stats *s2io_get_stats(struct net_device *dev) /* Configure Stats for immediate updt */ s2io_updt_stats(sp); + /* Using sp->stats as a staging area, because reset (due to mtu + change, for example) will clear some hardware counters */ + dev->stats.tx_packets += + le32_to_cpu(mac_control->stats_info->tmac_frms) - + sp->stats.tx_packets; sp->stats.tx_packets = le32_to_cpu(mac_control->stats_info->tmac_frms); + dev->stats.tx_errors += + le32_to_cpu(mac_control->stats_info->tmac_any_err_frms) - + sp->stats.tx_errors; sp->stats.tx_errors = le32_to_cpu(mac_control->stats_info->tmac_any_err_frms); + dev->stats.rx_errors += + le64_to_cpu(mac_control->stats_info->rmac_drop_frms) - + sp->stats.rx_errors; sp->stats.rx_errors = le64_to_cpu(mac_control->stats_info->rmac_drop_frms); + dev->stats.multicast = + le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms) - + sp->stats.multicast; sp->stats.multicast = le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms); + dev->stats.rx_length_errors = + le64_to_cpu(mac_control->stats_info->rmac_long_frms) - + sp->stats.rx_length_errors; sp->stats.rx_length_errors = le64_to_cpu(mac_control->stats_info->rmac_long_frms); /* collect per-ring rx_packets and rx_bytes */ - sp->stats.rx_packets = sp->stats.rx_bytes = 0; + dev->stats.rx_packets = dev->stats.rx_bytes = 0; for (i = 0; i < config->rx_ring_num; i++) { - sp->stats.rx_packets += mac_control->rings[i].rx_packets; - sp->stats.rx_bytes += mac_control->rings[i].rx_bytes; + dev->stats.rx_packets += mac_control->rings[i].rx_packets; + dev->stats.rx_bytes += mac_control->rings[i].rx_bytes; } - return (&sp->stats); + return (&dev->stats); } /** @@ -7419,7 +7436,7 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp) if (err_mask != 0x5) { DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n", dev->name, err_mask); - sp->stats.rx_crc_errors++; + dev->stats.rx_crc_errors++; sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize; dev_kfree_skb(skb); -- cgit v1.2.2 From 16d78bc255a55d16c0888dde336978d633e80b01 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Mon, 14 Jul 2008 09:07:32 +0200 Subject: dm9601: don't do usb transfers of data on stack dm_{read,write}() were doing USB transfers of data on stack, which isn't allowed. Fix it by kmalloc'ing a temporary buffer. Clean up the error handling for short transfers while we're at it. Signed-off-by: Peter Korsgaard Acked-by: David Brownell Signed-off-by: Jeff Garzik --- drivers/net/usb/dm9601.c | 52 ++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 42 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index f7319d326912..78df2be8a728 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -55,12 +55,28 @@ static int dm_read(struct usbnet *dev, u8 reg, u16 length, void *data) { + void *buf; + int err = -ENOMEM; + devdbg(dev, "dm_read() reg=0x%02x length=%d", reg, length); - return usb_control_msg(dev->udev, - usb_rcvctrlpipe(dev->udev, 0), - DM_READ_REGS, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0, reg, data, length, USB_CTRL_SET_TIMEOUT); + + buf = kmalloc(length, GFP_KERNEL); + if (!buf) + goto out; + + err = usb_control_msg(dev->udev, + usb_rcvctrlpipe(dev->udev, 0), + DM_READ_REGS, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, reg, buf, length, USB_CTRL_SET_TIMEOUT); + if (err == length) + memcpy(data, buf, length); + else if (err >= 0) + err = -EINVAL; + kfree(buf); + + out: + return err; } static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value) @@ -70,12 +86,28 @@ static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value) static int dm_write(struct usbnet *dev, u8 reg, u16 length, void *data) { + void *buf = NULL; + int err = -ENOMEM; + devdbg(dev, "dm_write() reg=0x%02x, length=%d", reg, length); - return usb_control_msg(dev->udev, - usb_sndctrlpipe(dev->udev, 0), - DM_WRITE_REGS, - USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE, - 0, reg, data, length, USB_CTRL_SET_TIMEOUT); + + if (data) { + buf = kmalloc(length, GFP_KERNEL); + if (!buf) + goto out; + memcpy(buf, data, length); + } + + err = usb_control_msg(dev->udev, + usb_sndctrlpipe(dev->udev, 0), + DM_WRITE_REGS, + USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE, + 0, reg, buf, length, USB_CTRL_SET_TIMEOUT); + kfree(buf); + if (err >= 0 && err < length) + err = -EINVAL; + out: + return err; } static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value) -- cgit v1.2.2 From 4e891910f5fc7b94c720f587686636a88447c5e4 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 8 Jul 2008 19:35:13 +0100 Subject: [netdrvr] wd: fix build breakage with new NS8390p API From: Alan Cox Signed-off-by: Jeff Garzik --- drivers/net/wd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wd.c b/drivers/net/wd.c index fa14255282af..6f9aa1643743 100644 --- a/drivers/net/wd.c +++ b/drivers/net/wd.c @@ -337,7 +337,7 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = ei_poll; #endif - NS8390_init(dev, 0); + NS8390p_init(dev, 0); #if 1 /* Enable interrupt generation on softconfig cards -- M.U */ -- cgit v1.2.2 From d02a4e31ed0385eb34fe49f19d69a860a020ca3c Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Wed, 30 Jul 2008 13:44:55 +0200 Subject: fix NE2000 linkage error Trying to build with CONFIG_NE2000=m fails with: scripts/mod/modpost -o /tmp/tmp/linux-2.6.27-rc1/Module.symvers -S -s ERROR: "NS8390_init" [drivers/net/ne.ko] undefined! This is because the split of 8390 into pausing and non-pausing versions was incompletely propagated to ne.c. This fixes it. Signed-off-by: Mikael Pettersson Signed-off-by: Jeff Garzik --- drivers/net/ne.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ne.c b/drivers/net/ne.c index 2fec6122c7fa..42443d697423 100644 --- a/drivers/net/ne.c +++ b/drivers/net/ne.c @@ -536,7 +536,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = eip_poll; #endif - NS8390_init(dev, 0); + NS8390p_init(dev, 0); ret = register_netdev(dev); if (ret) @@ -794,7 +794,7 @@ retry: if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name); ne_reset_8390(dev); - NS8390_init(dev,1); + NS8390p_init(dev, 1); break; } @@ -855,7 +855,7 @@ static int ne_drv_resume(struct platform_device *pdev) if (netif_running(dev)) { ne_reset_8390(dev); - NS8390_init(dev, 1); + NS8390p_init(dev, 1); netif_device_attach(dev); } return 0; -- cgit v1.2.2 From b0ca2a21f769ae255bd6821cbc5af8af797f1da7 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Mon, 30 Jun 2008 11:08:17 +0900 Subject: sh_eth: Add support of SH7763 to sh_eth SH7763 has Ethernet core same as SH7710/SH7712. Positions of some registry are different, but the basic part is the same. I add support of ethernet of sh7763 to sh_eth. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 4 +- drivers/net/sh_eth.c | 202 +++++++++++++++++++----- drivers/net/sh_eth.h | 426 +++++++++++++++++++++++++++++++++++++-------------- 3 files changed, 482 insertions(+), 150 deletions(-) (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index fa533c27052a..8a03875ec877 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -510,14 +510,14 @@ config STNIC config SH_ETH tristate "Renesas SuperH Ethernet support" depends on SUPERH && \ - (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712) + (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763) select CRC32 select MII select MDIO_BITBANG select PHYLIB help Renesas SuperH Ethernet device driver. - This driver support SH7710 and SH7712. + This driver support SH7710, SH7712 and SH7763. config SUNLANCE tristate "Sun LANCE support" diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index c69ba1395fa9..6a06b9503e4f 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -1,7 +1,7 @@ /* * SuperH Ethernet device driver * - * Copyright (C) 2006,2007 Nobuhiro Iwamatsu + * Copyright (C) 2006-2008 Nobuhiro Iwamatsu * Copyright (C) 2008 Renesas Solutions Corp. * * This program is free software; you can redistribute it and/or modify it @@ -143,13 +143,39 @@ static struct mdiobb_ops bb_ops = { .get_mdio_data = sh_get_mdio, }; +/* Chip Reset */ static void sh_eth_reset(struct net_device *ndev) { u32 ioaddr = ndev->base_addr; +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + int cnt = 100; + + ctrl_outl(EDSR_ENALL, ioaddr + EDSR); + ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR); + while (cnt > 0) { + if (!(ctrl_inl(ioaddr + EDMR) & 0x3)) + break; + mdelay(1); + cnt--; + } + if (cnt < 0) + printk(KERN_ERR "Device reset fail\n"); + + /* Table Init */ + ctrl_outl(0x0, ioaddr + TDLAR); + ctrl_outl(0x0, ioaddr + TDFAR); + ctrl_outl(0x0, ioaddr + TDFXR); + ctrl_outl(0x0, ioaddr + TDFFR); + ctrl_outl(0x0, ioaddr + RDLAR); + ctrl_outl(0x0, ioaddr + RDFAR); + ctrl_outl(0x0, ioaddr + RDFXR); + ctrl_outl(0x0, ioaddr + RDFFR); +#else ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR); mdelay(3); ctrl_outl(ctrl_inl(ioaddr + EDMR) & ~EDMR_SRST, ioaddr + EDMR); +#endif } /* free skb and descriptor buffer */ @@ -180,6 +206,7 @@ static void sh_eth_ring_free(struct net_device *ndev) /* format skb and descriptor buffer */ static void sh_eth_ring_format(struct net_device *ndev) { + u32 ioaddr = ndev->base_addr, reserve = 0; struct sh_eth_private *mdp = netdev_priv(ndev); int i; struct sk_buff *skb; @@ -201,9 +228,15 @@ static void sh_eth_ring_format(struct net_device *ndev) mdp->rx_skbuff[i] = skb; if (skb == NULL) break; - skb->dev = ndev; /* Mark as being used by this device. */ + skb->dev = ndev; /* Mark as being used by this device. */ +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + reserve = SH7763_SKB_ALIGN + - ((uint32_t)skb->data & (SH7763_SKB_ALIGN-1)); + if (reserve) + skb_reserve(skb, reserve); +#else skb_reserve(skb, RX_OFFSET); - +#endif /* RX descriptor */ rxdesc = &mdp->rx_ring[i]; rxdesc->addr = (u32)skb->data & ~0x3UL; @@ -211,12 +244,25 @@ static void sh_eth_ring_format(struct net_device *ndev) /* The size of the buffer is 16 byte boundary. */ rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F; + /* Rx descriptor address set */ + if (i == 0) { + ctrl_outl((u32)rxdesc, ioaddr + RDLAR); +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl((u32)rxdesc, ioaddr + RDFAR); +#endif + } } + /* Rx descriptor address set */ +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl((u32)rxdesc, ioaddr + RDFXR); + ctrl_outl(0x1, ioaddr + RDFFR); +#endif + mdp->dirty_rx = (u32) (i - RX_RING_SIZE); /* Mark the last entry as wrapping the ring. */ - rxdesc->status |= cpu_to_le32(RC_RDEL); + rxdesc->status |= cpu_to_le32(RD_RDEL); memset(mdp->tx_ring, 0, tx_ringsize); @@ -226,8 +272,21 @@ static void sh_eth_ring_format(struct net_device *ndev) txdesc = &mdp->tx_ring[i]; txdesc->status = cpu_to_le32(TD_TFP); txdesc->buffer_length = 0; + if (i == 0) { + /* Rx descriptor address set */ + ctrl_outl((u32)txdesc, ioaddr + TDLAR); +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl((u32)txdesc, ioaddr + TDFAR); +#endif + } } + /* Rx descriptor address set */ +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl((u32)txdesc, ioaddr + TDFXR); + ctrl_outl(0x1, ioaddr + TDFFR); +#endif + txdesc->status |= cpu_to_le32(TD_TDLE); } @@ -311,31 +370,43 @@ static int sh_eth_dev_init(struct net_device *ndev) /* Soft Reset */ sh_eth_reset(ndev); - ctrl_outl(RPADIR_PADS1, ioaddr + RPADIR); /* SH7712-DMA-RX-PAD2 */ + /* Descriptor format */ + sh_eth_ring_format(ndev); + ctrl_outl(RPADIR_INIT, ioaddr + RPADIR); /* all sh_eth int mask */ ctrl_outl(0, ioaddr + EESIPR); - /* FIFO size set */ +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl(EDMR_EL, ioaddr + EDMR); +#else ctrl_outl(0, ioaddr + EDMR); /* Endian change */ +#endif + /* FIFO size set */ ctrl_outl((FIFO_SIZE_T | FIFO_SIZE_R), ioaddr + FDR); ctrl_outl(0, ioaddr + TFTR); + /* Frame recv control */ ctrl_outl(0, ioaddr + RMCR); rx_int_var = mdp->rx_int_var = DESC_I_RINT8 | DESC_I_RINT5; tx_int_var = mdp->tx_int_var = DESC_I_TINT2; ctrl_outl(rx_int_var | tx_int_var, ioaddr + TRSCER); +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + /* Burst sycle set */ + ctrl_outl(0x800, ioaddr + BCULR); +#endif + ctrl_outl((FIFO_F_D_RFF | FIFO_F_D_RFD), ioaddr + FCFTR); - ctrl_outl(0, ioaddr + TRIMD); - /* Descriptor format */ - sh_eth_ring_format(ndev); +#if !defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl(0, ioaddr + TRIMD); +#endif - ctrl_outl((u32)mdp->rx_ring, ioaddr + RDLAR); - ctrl_outl((u32)mdp->tx_ring, ioaddr + TDLAR); + /* Recv frame limit set register */ + ctrl_outl(RFLR_VALUE, ioaddr + RFLR); ctrl_outl(ctrl_inl(ioaddr + EESR), ioaddr + EESR); ctrl_outl((DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff), ioaddr + EESIPR); @@ -345,21 +416,26 @@ static int sh_eth_dev_init(struct net_device *ndev) ECMR_ZPF | (mdp->duplex ? ECMR_DM : 0) | ECMR_TE | ECMR_RE; ctrl_outl(val, ioaddr + ECMR); - ctrl_outl(ECSR_BRCRX | ECSR_PSRTO | ECSR_LCHNG | ECSR_ICD | - ECSIPR_MPDIP, ioaddr + ECSR); - ctrl_outl(ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | - ECSIPR_ICDIP | ECSIPR_MPDIP, ioaddr + ECSIPR); + + /* E-MAC Status Register clear */ + ctrl_outl(ECSR_INIT, ioaddr + ECSR); + + /* E-MAC Interrupt Enable register */ + ctrl_outl(ECSIPR_INIT, ioaddr + ECSIPR); /* Set MAC address */ update_mac_address(ndev); /* mask reset */ -#if defined(CONFIG_CPU_SUBTYPE_SH7710) +#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7763) ctrl_outl(APR_AP, ioaddr + APR); ctrl_outl(MPR_MP, ioaddr + MPR); ctrl_outl(TPAUSER_UNLIMITED, ioaddr + TPAUSER); +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7710) ctrl_outl(BCFR_UNLIMITED, ioaddr + BCFR); #endif + /* Setting the Rx mode will start the Rx process. */ ctrl_outl(EDRRR_R, ioaddr + EDRRR); @@ -407,7 +483,7 @@ static int sh_eth_rx(struct net_device *ndev) int boguscnt = (mdp->dirty_rx + RX_RING_SIZE) - mdp->cur_rx; struct sk_buff *skb; u16 pkt_len = 0; - u32 desc_status; + u32 desc_status, reserve = 0; rxdesc = &mdp->rx_ring[entry]; while (!(rxdesc->status & cpu_to_le32(RD_RACT))) { @@ -454,28 +530,38 @@ static int sh_eth_rx(struct net_device *ndev) for (; mdp->cur_rx - mdp->dirty_rx > 0; mdp->dirty_rx++) { entry = mdp->dirty_rx % RX_RING_SIZE; rxdesc = &mdp->rx_ring[entry]; + /* The size of the buffer is 16 byte boundary. */ + rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F; + if (mdp->rx_skbuff[entry] == NULL) { skb = dev_alloc_skb(mdp->rx_buf_sz); mdp->rx_skbuff[entry] = skb; if (skb == NULL) break; /* Better luck next round. */ skb->dev = ndev; +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + reserve = SH7763_SKB_ALIGN + - ((uint32_t)skb->data & (SH7763_SKB_ALIGN-1)); + if (reserve) + skb_reserve(skb, reserve); +#else skb_reserve(skb, RX_OFFSET); +#endif + skb->ip_summed = CHECKSUM_NONE; rxdesc->addr = (u32)skb->data & ~0x3UL; } - /* The size of the buffer is 16 byte boundary. */ - rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F; if (entry >= RX_RING_SIZE - 1) rxdesc->status |= - cpu_to_le32(RD_RACT | RD_RFP | RC_RDEL); + cpu_to_le32(RD_RACT | RD_RFP | RD_RDEL); else rxdesc->status |= - cpu_to_le32(RD_RACT | RD_RFP); + cpu_to_le32(RD_RACT | RD_RFP); } /* Restart Rx engine if stopped. */ /* If we don't need to check status, don't. -KDU */ - ctrl_outl(EDRRR_R, ndev->base_addr + EDRRR); + if (!(ctrl_inl(ndev->base_addr + EDRRR) & EDRRR_R)) + ctrl_outl(EDRRR_R, ndev->base_addr + EDRRR); return 0; } @@ -529,13 +615,14 @@ static void sh_eth_error(struct net_device *ndev, int intr_status) printk(KERN_ERR "Receive Frame Overflow\n"); } } - +#if !defined(CONFIG_CPU_SUBTYPE_SH7763) if (intr_status & EESR_ADE) { if (intr_status & EESR_TDE) { if (intr_status & EESR_TFE) mdp->stats.tx_fifo_errors++; } } +#endif if (intr_status & EESR_RDE) { /* Receive Descriptor Empty int */ @@ -550,8 +637,11 @@ static void sh_eth_error(struct net_device *ndev, int intr_status) mdp->stats.rx_fifo_errors++; printk(KERN_ERR "Receive FIFO Overflow\n"); } - if (intr_status & - (EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE)) { + if (intr_status & (EESR_TWB | EESR_TABT | +#if !defined(CONFIG_CPU_SUBTYPE_SH7763) + EESR_ADE | +#endif + EESR_TDE | EESR_TFE)) { /* Tx error */ u32 edtrr = ctrl_inl(ndev->base_addr + EDTRR); /* dmesg */ @@ -582,17 +672,23 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev) ioaddr = ndev->base_addr; spin_lock(&mdp->lock); + /* Get interrpt stat */ intr_status = ctrl_inl(ioaddr + EESR); /* Clear interrupt */ ctrl_outl(intr_status, ioaddr + EESR); - if (intr_status & (EESR_FRC | EESR_RINT8 | - EESR_RINT5 | EESR_RINT4 | EESR_RINT3 | EESR_RINT2 | - EESR_RINT1)) + if (intr_status & (EESR_FRC | /* Frame recv*/ + EESR_RMAF | /* Multi cast address recv*/ + EESR_RRF | /* Bit frame recv */ + EESR_RTLF | /* Long frame recv*/ + EESR_RTSF | /* short frame recv */ + EESR_PRE | /* PHY-LSI recv error */ + EESR_CERF)){ /* recv frame CRC error */ sh_eth_rx(ndev); - if (intr_status & (EESR_FTC | - EESR_TINT4 | EESR_TINT3 | EESR_TINT2 | EESR_TINT1)) { + } + /* Tx Check */ + if (intr_status & TX_CHECK) { sh_eth_txfree(ndev); netif_wake_queue(ndev); } @@ -631,11 +727,32 @@ static void sh_eth_adjust_link(struct net_device *ndev) if (phydev->duplex != mdp->duplex) { new_state = 1; mdp->duplex = phydev->duplex; +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + if (mdp->duplex) { /* FULL */ + ctrl_outl(ctrl_inl(ioaddr + ECMR) | ECMR_DM, + ioaddr + ECMR); + } else { /* Half */ + ctrl_outl(ctrl_inl(ioaddr + ECMR) & ~ECMR_DM, + ioaddr + ECMR); + } +#endif } if (phydev->speed != mdp->speed) { new_state = 1; mdp->speed = phydev->speed; +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + switch (mdp->speed) { + case 10: /* 10BASE */ + ctrl_outl(GECMR_10, ioaddr + GECMR); break; + case 100:/* 100BASE */ + ctrl_outl(GECMR_100, ioaddr + GECMR); break; + case 1000: /* 1000BASE */ + ctrl_outl(GECMR_1000, ioaddr + GECMR); break; + default: + break; + } +#endif } if (mdp->link == PHY_DOWN) { ctrl_outl((ctrl_inl(ioaddr + ECMR) & ~ECMR_TXF) @@ -730,7 +847,7 @@ static int sh_eth_open(struct net_device *ndev) /* Set the timer to check for link beat. */ init_timer(&mdp->timer); mdp->timer.expires = (jiffies + (24 * HZ)) / 10;/* 2.4 sec. */ - setup_timer(&mdp->timer, sh_eth_timer, ndev); + setup_timer(&mdp->timer, sh_eth_timer, (unsigned long)ndev); return ret; @@ -820,7 +937,9 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev) mdp->cur_tx++; - ctrl_outl(EDTRR_TRNS, ndev->base_addr + EDTRR); + if (!(ctrl_inl(ndev->base_addr + EDTRR) & EDTRR_TRNS)) + ctrl_outl(EDTRR_TRNS, ndev->base_addr + EDTRR); + ndev->trans_start = jiffies; return 0; @@ -877,9 +996,15 @@ static struct net_device_stats *sh_eth_get_stats(struct net_device *ndev) ctrl_outl(0, ioaddr + CDCR); /* (write clear) */ mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + LCCR); ctrl_outl(0, ioaddr + LCCR); /* (write clear) */ +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CERCR);/* CERCR */ + ctrl_outl(0, ioaddr + CERCR); /* (write clear) */ + mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CEECR);/* CEECR */ + ctrl_outl(0, ioaddr + CEECR); /* (write clear) */ +#else mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CNDCR); ctrl_outl(0, ioaddr + CNDCR); /* (write clear) */ - +#endif return &mdp->stats; } @@ -929,8 +1054,13 @@ static void sh_eth_tsu_init(u32 ioaddr) ctrl_outl(0, ioaddr + TSU_FWSL0); ctrl_outl(0, ioaddr + TSU_FWSL1); ctrl_outl(TSU_FWSLC_POSTENU | TSU_FWSLC_POSTENL, ioaddr + TSU_FWSLC); +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl(0, ioaddr + TSU_QTAG0); /* Disable QTAG(0->1) */ + ctrl_outl(0, ioaddr + TSU_QTAG1); /* Disable QTAG(1->0) */ +#else ctrl_outl(0, ioaddr + TSU_QTAGM0); /* Disable QTAG(0->1) */ ctrl_outl(0, ioaddr + TSU_QTAGM1); /* Disable QTAG(1->0) */ +#endif ctrl_outl(0, ioaddr + TSU_FWSR); /* all interrupt status clear */ ctrl_outl(0, ioaddr + TSU_FWINMK); /* Disable all interrupt */ ctrl_outl(0, ioaddr + TSU_TEN); /* Disable all CAM entry */ @@ -1088,7 +1218,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev) /* First device only init */ if (!devno) { /* reset device */ - ctrl_outl(ARSTR_ARSTR, ndev->base_addr + ARSTR); + ctrl_outl(ARSTR_ARSTR, ARSTR); mdelay(1); /* TSU init (Init only)*/ @@ -1110,8 +1240,8 @@ static int sh_eth_drv_probe(struct platform_device *pdev) ndev->name, CARDNAME, (u32) ndev->base_addr); for (i = 0; i < 5; i++) - printk(KERN_INFO "%2.2x:", ndev->dev_addr[i]); - printk(KERN_INFO "%2.2x, IRQ %d.\n", ndev->dev_addr[i], ndev->irq); + printk(KERN_INFO "%02X:", ndev->dev_addr[i]); + printk(KERN_INFO "%02X, IRQ %d.\n", ndev->dev_addr[i], ndev->irq); platform_set_drvdata(pdev, ndev); diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h index e01e1c347715..45ad1b09ca5a 100644 --- a/drivers/net/sh_eth.h +++ b/drivers/net/sh_eth.h @@ -32,118 +32,249 @@ #define CARDNAME "sh-eth" #define TX_TIMEOUT (5*HZ) - -#define TX_RING_SIZE 128 /* Tx ring size */ -#define RX_RING_SIZE 128 /* Rx ring size */ -#define RX_OFFSET 2 /* skb offset */ +#define TX_RING_SIZE 64 /* Tx ring size */ +#define RX_RING_SIZE 64 /* Rx ring size */ #define ETHERSMALL 60 #define PKT_BUF_SZ 1538 +#ifdef CONFIG_CPU_SUBTYPE_SH7763 + +#define SH7763_SKB_ALIGN 32 /* Chip Base Address */ -#define SH_TSU_ADDR 0xA7000804 +# define SH_TSU_ADDR 0xFFE01800 +# define ARSTR 0xFFE01800 + +/* Chip Registers */ +/* E-DMAC */ +# define EDSR 0x000 +# define EDMR 0x400 +# define EDTRR 0x408 +# define EDRRR 0x410 +# define EESR 0x428 +# define EESIPR 0x430 +# define TDLAR 0x010 +# define TDFAR 0x014 +# define TDFXR 0x018 +# define TDFFR 0x01C +# define RDLAR 0x030 +# define RDFAR 0x034 +# define RDFXR 0x038 +# define RDFFR 0x03C +# define TRSCER 0x438 +# define RMFCR 0x440 +# define TFTR 0x448 +# define FDR 0x450 +# define RMCR 0x458 +# define RPADIR 0x460 +# define FCFTR 0x468 + +/* Ether Register */ +# define ECMR 0x500 +# define ECSR 0x510 +# define ECSIPR 0x518 +# define PIR 0x520 +# define PSR 0x528 +# define PIPR 0x52C +# define RFLR 0x508 +# define APR 0x554 +# define MPR 0x558 +# define PFTCR 0x55C +# define PFRCR 0x560 +# define TPAUSER 0x564 +# define GECMR 0x5B0 +# define BCULR 0x5B4 +# define MAHR 0x5C0 +# define MALR 0x5C8 +# define TROCR 0x700 +# define CDCR 0x708 +# define LCCR 0x710 +# define CEFCR 0x740 +# define FRECR 0x748 +# define TSFRCR 0x750 +# define TLFRCR 0x758 +# define RFCR 0x760 +# define CERCR 0x768 +# define CEECR 0x770 +# define MAFCR 0x778 + +/* TSU Absolute Address */ +# define TSU_CTRST 0x004 +# define TSU_FWEN0 0x010 +# define TSU_FWEN1 0x014 +# define TSU_FCM 0x18 +# define TSU_BSYSL0 0x20 +# define TSU_BSYSL1 0x24 +# define TSU_PRISL0 0x28 +# define TSU_PRISL1 0x2C +# define TSU_FWSL0 0x30 +# define TSU_FWSL1 0x34 +# define TSU_FWSLC 0x38 +# define TSU_QTAG0 0x40 +# define TSU_QTAG1 0x44 +# define TSU_FWSR 0x50 +# define TSU_FWINMK 0x54 +# define TSU_ADQT0 0x48 +# define TSU_ADQT1 0x4C +# define TSU_VTAG0 0x58 +# define TSU_VTAG1 0x5C +# define TSU_ADSBSY 0x60 +# define TSU_TEN 0x64 +# define TSU_POST1 0x70 +# define TSU_POST2 0x74 +# define TSU_POST3 0x78 +# define TSU_POST4 0x7C +# define TSU_ADRH0 0x100 +# define TSU_ADRL0 0x104 +# define TSU_ADRH31 0x1F8 +# define TSU_ADRL31 0x1FC + +# define TXNLCR0 0x80 +# define TXALCR0 0x84 +# define RXNLCR0 0x88 +# define RXALCR0 0x8C +# define FWNLCR0 0x90 +# define FWALCR0 0x94 +# define TXNLCR1 0xA0 +# define TXALCR1 0xA4 +# define RXNLCR1 0xA8 +# define RXALCR1 0xAC +# define FWNLCR1 0xB0 +# define FWALCR1 0x40 + +#else /* CONFIG_CPU_SUBTYPE_SH7763 */ +# define RX_OFFSET 2 /* skb offset */ +/* Chip base address */ +# define SH_TSU_ADDR 0xA7000804 +# define ARSTR 0xA7000800 /* Chip Registers */ /* E-DMAC */ -#define EDMR 0x0000 -#define EDTRR 0x0004 -#define EDRRR 0x0008 -#define TDLAR 0x000C -#define RDLAR 0x0010 -#define EESR 0x0014 -#define EESIPR 0x0018 -#define TRSCER 0x001C -#define RMFCR 0x0020 -#define TFTR 0x0024 -#define FDR 0x0028 -#define RMCR 0x002C -#define EDOCR 0x0030 -#define FCFTR 0x0034 -#define RPADIR 0x0038 -#define TRIMD 0x003C -#define RBWAR 0x0040 -#define RDFAR 0x0044 -#define TBRAR 0x004C -#define TDFAR 0x0050 +# define EDMR 0x0000 +# define EDTRR 0x0004 +# define EDRRR 0x0008 +# define TDLAR 0x000C +# define RDLAR 0x0010 +# define EESR 0x0014 +# define EESIPR 0x0018 +# define TRSCER 0x001C +# define RMFCR 0x0020 +# define TFTR 0x0024 +# define FDR 0x0028 +# define RMCR 0x002C +# define EDOCR 0x0030 +# define FCFTR 0x0034 +# define RPADIR 0x0038 +# define TRIMD 0x003C +# define RBWAR 0x0040 +# define RDFAR 0x0044 +# define TBRAR 0x004C +# define TDFAR 0x0050 + /* Ether Register */ -#define ECMR 0x0160 -#define ECSR 0x0164 -#define ECSIPR 0x0168 -#define PIR 0x016C -#define MAHR 0x0170 -#define MALR 0x0174 -#define RFLR 0x0178 -#define PSR 0x017C -#define TROCR 0x0180 -#define CDCR 0x0184 -#define LCCR 0x0188 -#define CNDCR 0x018C -#define CEFCR 0x0194 -#define FRECR 0x0198 -#define TSFRCR 0x019C -#define TLFRCR 0x01A0 -#define RFCR 0x01A4 -#define MAFCR 0x01A8 -#define IPGR 0x01B4 -#if defined(CONFIG_CPU_SUBTYPE_SH7710) -#define APR 0x01B8 -#define MPR 0x01BC -#define TPAUSER 0x1C4 -#define BCFR 0x1CC -#endif /* CONFIG_CPU_SH7710 */ - -#define ARSTR 0x0800 +# define ECMR 0x0160 +# define ECSR 0x0164 +# define ECSIPR 0x0168 +# define PIR 0x016C +# define MAHR 0x0170 +# define MALR 0x0174 +# define RFLR 0x0178 +# define PSR 0x017C +# define TROCR 0x0180 +# define CDCR 0x0184 +# define LCCR 0x0188 +# define CNDCR 0x018C +# define CEFCR 0x0194 +# define FRECR 0x0198 +# define TSFRCR 0x019C +# define TLFRCR 0x01A0 +# define RFCR 0x01A4 +# define MAFCR 0x01A8 +# define IPGR 0x01B4 +# if defined(CONFIG_CPU_SUBTYPE_SH7710) +# define APR 0x01B8 +# define MPR 0x01BC +# define TPAUSER 0x1C4 +# define BCFR 0x1CC +# endif /* CONFIG_CPU_SH7710 */ /* TSU */ -#define TSU_CTRST 0x004 -#define TSU_FWEN0 0x010 -#define TSU_FWEN1 0x014 -#define TSU_FCM 0x018 -#define TSU_BSYSL0 0x020 -#define TSU_BSYSL1 0x024 -#define TSU_PRISL0 0x028 -#define TSU_PRISL1 0x02C -#define TSU_FWSL0 0x030 -#define TSU_FWSL1 0x034 -#define TSU_FWSLC 0x038 -#define TSU_QTAGM0 0x040 -#define TSU_QTAGM1 0x044 -#define TSU_ADQT0 0x048 -#define TSU_ADQT1 0x04C -#define TSU_FWSR 0x050 -#define TSU_FWINMK 0x054 -#define TSU_ADSBSY 0x060 -#define TSU_TEN 0x064 -#define TSU_POST1 0x070 -#define TSU_POST2 0x074 -#define TSU_POST3 0x078 -#define TSU_POST4 0x07C -#define TXNLCR0 0x080 -#define TXALCR0 0x084 -#define RXNLCR0 0x088 -#define RXALCR0 0x08C -#define FWNLCR0 0x090 -#define FWALCR0 0x094 -#define TXNLCR1 0x0A0 -#define TXALCR1 0x0A4 -#define RXNLCR1 0x0A8 -#define RXALCR1 0x0AC -#define FWNLCR1 0x0B0 -#define FWALCR1 0x0B4 +# define TSU_CTRST 0x004 +# define TSU_FWEN0 0x010 +# define TSU_FWEN1 0x014 +# define TSU_FCM 0x018 +# define TSU_BSYSL0 0x020 +# define TSU_BSYSL1 0x024 +# define TSU_PRISL0 0x028 +# define TSU_PRISL1 0x02C +# define TSU_FWSL0 0x030 +# define TSU_FWSL1 0x034 +# define TSU_FWSLC 0x038 +# define TSU_QTAGM0 0x040 +# define TSU_QTAGM1 0x044 +# define TSU_ADQT0 0x048 +# define TSU_ADQT1 0x04C +# define TSU_FWSR 0x050 +# define TSU_FWINMK 0x054 +# define TSU_ADSBSY 0x060 +# define TSU_TEN 0x064 +# define TSU_POST1 0x070 +# define TSU_POST2 0x074 +# define TSU_POST3 0x078 +# define TSU_POST4 0x07C +# define TXNLCR0 0x080 +# define TXALCR0 0x084 +# define RXNLCR0 0x088 +# define RXALCR0 0x08C +# define FWNLCR0 0x090 +# define FWALCR0 0x094 +# define TXNLCR1 0x0A0 +# define TXALCR1 0x0A4 +# define RXNLCR1 0x0A8 +# define RXALCR1 0x0AC +# define FWNLCR1 0x0B0 +# define FWALCR1 0x0B4 #define TSU_ADRH0 0x0100 #define TSU_ADRL0 0x0104 #define TSU_ADRL31 0x01FC -/* Register's bits */ +#endif /* CONFIG_CPU_SUBTYPE_SH7763 */ + +/* + * Register's bits + */ +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +/* EDSR */ +enum EDSR_BIT { + EDSR_ENT = 0x01, EDSR_ENR = 0x02, +}; +#define EDSR_ENALL (EDSR_ENT|EDSR_ENR) + +/* GECMR */ +enum GECMR_BIT { + GECMR_10 = 0x0, GECMR_100 = 0x04, GECMR_1000 = 0x01, +}; +#endif /* EDMR */ enum DMAC_M_BIT { - EDMR_DL1 = 0x20, EDMR_DL0 = 0x10, EDMR_SRST = 0x01, + EDMR_DL1 = 0x20, EDMR_DL0 = 0x10, +#ifdef CONFIG_CPU_SUBTYPE_SH7763 + EDMR_SRST = 0x03, + EMDR_DESC_R = 0x30, /* Descriptor reserve size */ + EDMR_EL = 0x40, /* Litte endian */ +#else /* CONFIG_CPU_SUBTYPE_SH7763 */ + EDMR_SRST = 0x01, +#endif }; /* EDTRR */ enum DMAC_T_BIT { +#ifdef CONFIG_CPU_SUBTYPE_SH7763 + EDTRR_TRNS = 0x03, +#else EDTRR_TRNS = 0x01, +#endif }; /* EDRRR*/ @@ -173,21 +304,47 @@ enum PHY_STATUS_BIT { PHY_ST_LINK = 0x01, }; /* EESR */ enum EESR_BIT { - EESR_TWB = 0x40000000, EESR_TABT = 0x04000000, +#ifndef CONFIG_CPU_SUBTYPE_SH7763 + EESR_TWB = 0x40000000, +#else + EESR_TWB = 0xC0000000, + EESR_TC1 = 0x20000000, + EESR_TUC = 0x10000000, + EESR_ROC = 0x80000000, +#endif + EESR_TABT = 0x04000000, EESR_RABT = 0x02000000, EESR_RFRMER = 0x01000000, - EESR_ADE = 0x00800000, EESR_ECI = 0x00400000, - EESR_FTC = 0x00200000, EESR_TDE = 0x00100000, - EESR_TFE = 0x00080000, EESR_FRC = 0x00040000, - EESR_RDE = 0x00020000, EESR_RFE = 0x00010000, - EESR_TINT4 = 0x00000800, EESR_TINT3 = 0x00000400, - EESR_TINT2 = 0x00000200, EESR_TINT1 = 0x00000100, - EESR_RINT8 = 0x00000080, EESR_RINT5 = 0x00000010, - EESR_RINT4 = 0x00000008, EESR_RINT3 = 0x00000004, - EESR_RINT2 = 0x00000002, EESR_RINT1 = 0x00000001, -}; - -#define EESR_ERR_CHECK (EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \ +#ifndef CONFIG_CPU_SUBTYPE_SH7763 + EESR_ADE = 0x00800000, +#endif + EESR_ECI = 0x00400000, + EESR_FTC = 0x00200000, EESR_TDE = 0x00100000, + EESR_TFE = 0x00080000, EESR_FRC = 0x00040000, + EESR_RDE = 0x00020000, EESR_RFE = 0x00010000, +#ifndef CONFIG_CPU_SUBTYPE_SH7763 + EESR_CND = 0x00000800, +#endif + EESR_DLC = 0x00000400, + EESR_CD = 0x00000200, EESR_RTO = 0x00000100, + EESR_RMAF = 0x00000080, EESR_CEEF = 0x00000040, + EESR_CELF = 0x00000020, EESR_RRF = 0x00000010, + EESR_RTLF = 0x00000008, EESR_RTSF = 0x00000004, + EESR_PRE = 0x00000002, EESR_CERF = 0x00000001, +}; + + +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +# define TX_CHECK (EESR_TC1 | EESR_FTC) +# define EESR_ERR_CHECK (EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \ + | EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI) +# define TX_ERROR_CEHCK (EESR_TWB | EESR_TABT | EESR_TDE | EESR_TFE) + +#else +# define TX_CHECK (EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO) +# define EESR_ERR_CHECK (EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \ | EESR_RFRMER | EESR_ADE | EESR_TFE | EESR_TDE | EESR_ECI) +# define TX_ERROR_CEHCK (EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE) +#endif /* EESIPR */ enum DMAC_IM_BIT { @@ -207,8 +364,8 @@ enum DMAC_IM_BIT { /* Receive descriptor bit */ enum RD_STS_BIT { - RD_RACT = 0x80000000, RC_RDEL = 0x40000000, - RC_RFP1 = 0x20000000, RC_RFP0 = 0x10000000, + RD_RACT = 0x80000000, RD_RDEL = 0x40000000, + RD_RFP1 = 0x20000000, RD_RFP0 = 0x10000000, RD_RFE = 0x08000000, RD_RFS10 = 0x00000200, RD_RFS9 = 0x00000100, RD_RFS8 = 0x00000080, RD_RFS7 = 0x00000040, RD_RFS6 = 0x00000020, @@ -216,9 +373,9 @@ enum RD_STS_BIT { RD_RFS3 = 0x00000004, RD_RFS2 = 0x00000002, RD_RFS1 = 0x00000001, }; -#define RDF1ST RC_RFP1 -#define RDFEND RC_RFP0 -#define RD_RFP (RC_RFP1|RC_RFP0) +#define RDF1ST RD_RFP1 +#define RDFEND RD_RFP0 +#define RD_RFP (RD_RFP1|RD_RFP0) /* FCFTR */ enum FCFTR_BIT { @@ -231,7 +388,8 @@ enum FCFTR_BIT { /* Transfer descriptor bit */ enum TD_STS_BIT { - TD_TACT = 0x80000000, TD_TDLE = 0x40000000, TD_TFP1 = 0x20000000, + TD_TACT = 0x80000000, + TD_TDLE = 0x40000000, TD_TFP1 = 0x20000000, TD_TFP0 = 0x10000000, }; #define TDF1ST TD_TFP1 @@ -242,6 +400,10 @@ enum TD_STS_BIT { enum RECV_RST_BIT { RMCR_RST = 0x01, }; /* ECMR */ enum FELIC_MODE_BIT { +#ifdef CONFIG_CPU_SUBTYPE_SH7763 + ECMR_TRCCM = 0x04000000, ECMR_RCSC = 0x00800000, + ECMR_DPAD = 0x00200000, ECMR_RZPF = 0x00100000, +#endif ECMR_ZPF = 0x00080000, ECMR_PFR = 0x00040000, ECMR_RXF = 0x00020000, ECMR_TXF = 0x00010000, ECMR_MCT = 0x00002000, ECMR_PRCEF = 0x00001000, ECMR_PMDE = 0x00000200, ECMR_RE = 0x00000040, ECMR_TE = 0x00000020, @@ -249,18 +411,45 @@ enum FELIC_MODE_BIT { ECMR_PRM = 0x00000001, }; +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +#define ECMR_CHG_DM (ECMR_TRCCM | ECMR_RZPF | ECMR_ZPF |\ + ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT) +#else +#define ECMR_CHG_DM (ECMR_ZPF | ECMR_PFR ECMR_RXF | ECMR_TXF | ECMR_MCT) +#endif + /* ECSR */ enum ECSR_STATUS_BIT { - ECSR_BRCRX = 0x20, ECSR_PSRTO = 0x10, ECSR_LCHNG = 0x04, +#ifndef CONFIG_CPU_SUBTYPE_SH7763 + ECSR_BRCRX = 0x20, ECSR_PSRTO = 0x10, +#endif + ECSR_LCHNG = 0x04, ECSR_MPD = 0x02, ECSR_ICD = 0x01, }; +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +# define ECSR_INIT (ECSR_ICD | ECSIPR_MPDIP) +#else +# define ECSR_INIT (ECSR_BRCRX | ECSR_PSRTO | \ + ECSR_LCHNG | ECSR_ICD | ECSIPR_MPDIP) +#endif + /* ECSIPR */ enum ECSIPR_STATUS_MASK_BIT { - ECSIPR_BRCRXIP = 0x20, ECSIPR_PSRTOIP = 0x10, ECSIPR_LCHNGIP = 0x04, +#ifndef CONFIG_CPU_SUBTYPE_SH7763 + ECSIPR_BRCRXIP = 0x20, ECSIPR_PSRTOIP = 0x10, +#endif + ECSIPR_LCHNGIP = 0x04, ECSIPR_MPDIP = 0x02, ECSIPR_ICDIP = 0x01, }; +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +# define ECSIPR_INIT (ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP) +#else +# define ECSIPR_INIT (ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | \ + ECSIPR_ICDIP | ECSIPR_MPDIP) +#endif + /* APR */ enum APR_BIT { APR_AP = 0x00000001, @@ -285,6 +474,15 @@ enum RPADIR_BIT { RPADIR_PADR = 0x0003f, }; +#if defined(CONFIG_CPU_SUBTYPE_SH7763) +# define RPADIR_INIT (0x00) +#else +# define RPADIR_INIT (RPADIR_PADS1) +#endif + +/* RFLR */ +#define RFLR_VALUE 0x1000 + /* FDR */ enum FIFO_SIZE_BIT { FIFO_SIZE_T = 0x00000700, FIFO_SIZE_R = 0x00000007, @@ -316,7 +514,7 @@ enum PHY_ANA_BIT { PHY_A_NP = 0x8000, PHY_A_ACK = 0x4000, PHY_A_RF = 0x2000, PHY_A_FCS = 0x0400, PHY_A_T4 = 0x0200, PHY_A_FDX = 0x0100, PHY_A_HDX = 0x0080, PHY_A_10FDX = 0x0040, PHY_A_10HDX = 0x0020, - PHY_A_SEL = 0x001f, + PHY_A_SEL = 0x001e, }; /* PHY_ANL */ enum PHY_ANL_BIT { @@ -449,6 +647,10 @@ struct sh_eth_private { struct net_device_stats tsu_stats; /* TSU forward status */ }; +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +/* SH7763 has endian control register */ +#define swaps(x, y) +#else static void swaps(char *src, int len) { #ifdef __LITTLE_ENDIAN__ @@ -460,5 +662,5 @@ static void swaps(char *src, int len) *p = swab32(*p); #endif } - +#endif /* CONFIG_CPU_SUBTYPE_SH7763 */ #endif -- cgit v1.2.2 From 68905eb4dc9c691ba09df767ac0641395025cef6 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 21 Jul 2008 09:57:26 +0200 Subject: drivers/net/ehea/ehea_main.c: Release mutex in error handling code The mutex is released on a successful return, so it would seem that it should be released on an error return as well. The semantic patch finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ expression l; @@ mutex_lock(l); ... when != mutex_unlock(l) when any when strict ( if (...) { ... when != mutex_unlock(l) + mutex_unlock(l); return ...; } | mutex_unlock(l); ) // Signed-off-by: Julia Lawall Signed-off-by: Jeff Garzik --- drivers/net/ehea/ehea_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 0920b796bd78..b70c5314f537 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -2937,9 +2937,9 @@ static void ehea_rereg_mrs(struct work_struct *work) } } } - mutex_unlock(&dlpar_mem_lock); - ehea_info("re-initializing driver complete"); + ehea_info("re-initializing driver complete"); out: + mutex_unlock(&dlpar_mem_lock); return; } -- cgit v1.2.2