From cb11c048928b519548dbfb7da149dd2521500db0 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Tue, 1 Mar 2011 19:18:35 +0000 Subject: s3fb: enable DTPC Enable Data Transfer Position Control (DTPC). This is needed at least on Virge/DX to correctly display at higher pixclocks. Signed-off-by: Ondrej Zary Acked-by: Ondrej Zajicek Signed-off-by: Paul Mundt --- drivers/video/s3fb.c | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/video/s3fb.c b/drivers/video/s3fb.c index 7b8fdc6d9d55..808db19aa5de 100644 --- a/drivers/video/s3fb.c +++ b/drivers/video/s3fb.c @@ -126,6 +126,8 @@ static const struct vga_regset s3_line_compare_regs[] = {{0x18, 0, 7}, {0x07, static const struct vga_regset s3_start_address_regs[] = {{0x0d, 0, 7}, {0x0c, 0, 7}, {0x31, 4, 5}, {0x51, 0, 1}, VGA_REGSET_END}; static const struct vga_regset s3_offset_regs[] = {{0x13, 0, 7}, {0x51, 4, 5}, VGA_REGSET_END}; /* set 0x43 bit 2 to 0 */ +static const struct vga_regset s3_dtpc_regs[] = {{0x3B, 0, 7}, {0x5D, 6, 6}, VGA_REGSET_END}; + static const struct svga_timing_regs s3_timing_regs = { s3_h_total_regs, s3_h_display_regs, s3_h_blank_start_regs, s3_h_blank_end_regs, s3_h_sync_start_regs, s3_h_sync_end_regs, @@ -485,6 +487,7 @@ static int s3fb_set_par(struct fb_info *info) struct s3fb_info *par = info->par; u32 value, mode, hmul, offset_value, screen_size, multiplex, dbytes; u32 bpp = info->var.bits_per_pixel; + u32 htotal, hsstart; if (bpp != 0) { info->fix.ypanstep = 1; @@ -604,7 +607,9 @@ static int s3fb_set_par(struct fb_info *info) if (par->chip == CHIP_360_TRIO3D_1X || par->chip == CHIP_362_TRIO3D_2X || par->chip == CHIP_368_TRIO3D_2X || - par->chip == CHIP_365_TRIO3D) { + par->chip == CHIP_365_TRIO3D || + par->chip == CHIP_375_VIRGE_DX || + par->chip == CHIP_385_VIRGE_GX) { dbytes = info->var.xres * ((bpp+7)/8); vga_wcrt(par->state.vgabase, 0x91, (dbytes + 7) / 8); vga_wcrt(par->state.vgabase, 0x90, (((dbytes + 7) / 8) >> 8) | 0x80); @@ -612,6 +617,16 @@ static int s3fb_set_par(struct fb_info *info) vga_wcrt(par->state.vgabase, 0x66, 0x81); } + if (par->chip == CHIP_356_VIRGE_GX2 || + par->chip == CHIP_357_VIRGE_GX2P || + par->chip == CHIP_359_VIRGE_GX2P || + par->chip == CHIP_360_TRIO3D_1X || + par->chip == CHIP_362_TRIO3D_2X || + par->chip == CHIP_368_TRIO3D_2X) + vga_wcrt(par->state.vgabase, 0x34, 0x00); + else /* enable Data Transfer Position Control (DTPC) */ + vga_wcrt(par->state.vgabase, 0x34, 0x10); + svga_wcrt_mask(par->state.vgabase, 0x31, 0x00, 0x40); multiplex = 0; hmul = 1; @@ -745,9 +760,14 @@ static int s3fb_set_par(struct fb_info *info) hmul, info->node); /* Set interlaced mode start/end register */ - value = info->var.xres + info->var.left_margin + info->var.right_margin + info->var.hsync_len; - value = ((value * hmul) / 8) - 5; - vga_wcrt(par->state.vgabase, 0x3C, (value + 1) / 2); + htotal = info->var.xres + info->var.left_margin + info->var.right_margin + info->var.hsync_len; + htotal = ((htotal * hmul) / 8) - 5; + vga_wcrt(par->state.vgabase, 0x3C, (htotal + 1) / 2); + + /* Set Data Transfer Position */ + hsstart = ((info->var.xres + info->var.right_margin) * hmul) / 8; + value = clamp((htotal + hsstart + 1) / 2, hsstart + 4, htotal + 1); + svga_wcrt_multi(par->state.vgabase, s3_dtpc_regs, value); memset_io(info->screen_base, 0x00, screen_size); /* Device and screen back on */ -- cgit v1.2.2