From ee05d6939ed17b55e9c2466af32c208e0d547eb8 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Tue, 14 Sep 2010 15:15:52 +0200 Subject: vhost-net: fix range checking in mrg bufs case In mergeable buffer case, we use headcount, log_num and seg as indexes in same-size arrays, and we know that headcount <= seg and log_num equals either 0 or seg. Therefore, the right thing to do is range-check seg, not headcount as we do now: these will be different if guest chains s/g descriptors (this does not happen now, but we can not trust the guest). Long term, we should add BUG_ON checks to verify two other indexes are what we think they should be. Reported-by: Jason Wang Signed-off-by: Michael S. Tsirkin --- drivers/vhost/net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index 29e850a7a2f9..7c8008225ee3 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -243,7 +243,7 @@ static int get_rx_bufs(struct vhost_virtqueue *vq, int r, nlogs = 0; while (datalen > 0) { - if (unlikely(headcount >= VHOST_NET_MAX_SG)) { + if (unlikely(seg >= VHOST_NET_MAX_SG)) { r = -ENOBUFS; goto err; } -- cgit v1.2.2 From 7acc7c683a747689aaaaad4fce1683fc3f85e552 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Wed, 8 Sep 2010 08:30:20 -0700 Subject: iwlwifi: do not perferm force reset while doing scan When uCode error condition detected, driver try to perform either rf reset or firmware reload in order bring device back to working condition. If rf reset is required and scan is in process, there is no need to issue rf reset since scan already reset the rf. If firmware reload is required and scan is in process, skip the reload request. There is a possibility firmware reload during scan cause problem. [ 485.804046] WARNING: at net/mac80211/main.c:310 ieee80211_restart_hw+0x28/0x62() [ 485.804049] Hardware name: Latitude E6400 [ 485.804052] ieee80211_restart_hw called with hardware scan in progress [ 485.804054] Modules linked in: iwlagn iwlcore bnep sco rfcomm l2cap crc16 bluetooth [last unloaded: iwlcore] [ 485.804069] Pid: 812, comm: kworker/u:3 Tainted: G W 2.6.36-rc3-wl+ #74 [ 485.804072] Call Trace: [ 485.804079] [] warn_slowpath_common+0x60/0x75 [ 485.804084] [] warn_slowpath_fmt+0x26/0x2a [ 485.804089] [] ieee80211_restart_hw+0x28/0x62 [ 485.804102] [] iwl_bg_restart+0x113/0x150 [iwlagn] [ 485.804108] [] process_one_work+0x181/0x25c [ 485.804119] [] ? iwl_bg_restart+0x0/0x150 [iwlagn] [ 485.804124] [] worker_thread+0xf9/0x1f2 [ 485.804128] [] ? worker_thread+0x0/0x1f2 [ 485.804133] [] kthread+0x64/0x69 [ 485.804137] [] ? kthread+0x0/0x69 [ 485.804141] [] kernel_thread_helper+0x6/0x10 [ 485.804145] ---[ end trace 3d4ebdc02d524bbb ]--- [ 485.804148] WG> 1 [ 485.804153] Pid: 812, comm: kworker/u:3 Tainted: G W 2.6.36-rc3-wl+ #74 [ 485.804156] Call Trace: [ 485.804161] [] ? ieee80211_restart_hw+0x5c/0x62 [ 485.804172] [] iwl_bg_restart+0x118/0x150 [iwlagn] [ 485.804177] [] process_one_work+0x181/0x25c [ 485.804188] [] ? iwl_bg_restart+0x0/0x150 [iwlagn] [ 485.804192] [] worker_thread+0xf9/0x1f2 [ 485.804197] [] ? worker_thread+0x0/0x1f2 [ 485.804201] [] kthread+0x64/0x69 [ 485.804205] [] ? kthread+0x0/0x69 [ 485.804209] [] kernel_thread_helper+0x6/0x10 Signed-off-by: Wey-Yi Guy --- drivers/net/wireless/iwlwifi/iwl-core.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 07dbc2796448..e23c4060a0f0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2613,6 +2613,11 @@ int iwl_force_reset(struct iwl_priv *priv, int mode, bool external) if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return -EINVAL; + if (test_bit(STATUS_SCANNING, &priv->status)) { + IWL_DEBUG_INFO(priv, "scan in progress.\n"); + return -EINVAL; + } + if (mode >= IWL_MAX_FORCE_RESET) { IWL_DEBUG_INFO(priv, "invalid reset request.\n"); return -EINVAL; -- cgit v1.2.2 From 04746ff1289f75af26af279eb4b0b3e231677ee4 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 17 Sep 2010 22:58:08 -0700 Subject: qlcnic: dont assume NET_IP_ALIGN is 2 qlcnic driver allocates rx skbs and gives to hardware too bytes of extra storage, allowing for corruption of kernel data. NET_IP_ALIGN being 0 on some platforms (including x86), drivers should not assume it's 2. rds_ring->skb_size = rds_ring->dma_size + NET_IP_ALIGN; ... skb = dev_alloc_skb(rds_ring->skb_size); skb_reserve(skb, 2); pci_map_single(pdev, skb->data, rds_ring->dma_size, PCI_DMA_FROMDEVICE); (and rds_ring->skb_size == rds_ring->dma_size) -> bug Because of extra alignment (1500 + 32) -> four extra bytes are available before the struct skb_shared_info, so corruption is not noticed. Note: this driver could use netdev_alloc_skb_ip_align() Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/qlcnic/qlcnic_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/qlcnic/qlcnic_init.c b/drivers/net/qlcnic/qlcnic_init.c index 75ba744b173c..60ab753f809a 100644 --- a/drivers/net/qlcnic/qlcnic_init.c +++ b/drivers/net/qlcnic/qlcnic_init.c @@ -1316,7 +1316,7 @@ qlcnic_alloc_rx_skb(struct qlcnic_adapter *adapter, return -ENOMEM; } - skb_reserve(skb, 2); + skb_reserve(skb, NET_IP_ALIGN); dma = pci_map_single(pdev, skb->data, rds_ring->dma_size, PCI_DMA_FROMDEVICE); -- cgit v1.2.2 From 8df8fd27123054b02007361bd5483775db84b4a8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 20 Sep 2010 02:28:59 +0000 Subject: qlcnic: dont set skb->truesize skb->truesize is set in core network. Dont change it unless dealing with fragments. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/qlcnic/qlcnic_init.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/qlcnic/qlcnic_init.c b/drivers/net/qlcnic/qlcnic_init.c index 60ab753f809a..2c7cf0b64811 100644 --- a/drivers/net/qlcnic/qlcnic_init.c +++ b/drivers/net/qlcnic/qlcnic_init.c @@ -1404,7 +1404,6 @@ qlcnic_process_rcv(struct qlcnic_adapter *adapter, if (pkt_offset) skb_pull(skb, pkt_offset); - skb->truesize = skb->len + sizeof(struct sk_buff); skb->protocol = eth_type_trans(skb, netdev); napi_gro_receive(&sds_ring->napi, skb); @@ -1466,8 +1465,6 @@ qlcnic_process_lro(struct qlcnic_adapter *adapter, skb_put(skb, lro_length + data_offset); - skb->truesize = skb->len + sizeof(struct sk_buff) + skb_headroom(skb); - skb_pull(skb, l2_hdr_offset); skb->protocol = eth_type_trans(skb, netdev); @@ -1700,8 +1697,6 @@ qlcnic_process_rcv_diag(struct qlcnic_adapter *adapter, if (pkt_offset) skb_pull(skb, pkt_offset); - skb->truesize = skb->len + sizeof(struct sk_buff); - if (!qlcnic_check_loopback_buff(skb->data)) adapter->diag_cnt++; -- cgit v1.2.2 From 7e96dc7045bff8758804b047c0dfb6868f182500 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 21 Sep 2010 13:04:04 -0700 Subject: netxen: dont set skb->truesize skb->truesize is set in core network. Dont change it unless dealing with fragments. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_init.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index cabae7bb1fc6..b075a35b85d4 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -1540,7 +1540,6 @@ netxen_process_rcv(struct netxen_adapter *adapter, if (pkt_offset) skb_pull(skb, pkt_offset); - skb->truesize = skb->len + sizeof(struct sk_buff); skb->protocol = eth_type_trans(skb, netdev); napi_gro_receive(&sds_ring->napi, skb); @@ -1602,8 +1601,6 @@ netxen_process_lro(struct netxen_adapter *adapter, skb_put(skb, lro_length + data_offset); - skb->truesize = skb->len + sizeof(struct sk_buff) + skb_headroom(skb); - skb_pull(skb, l2_hdr_offset); skb->protocol = eth_type_trans(skb, netdev); -- cgit v1.2.2 From 5786aee8bf6d747ea59595601a19e78ad33d6929 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Wed, 22 Sep 2010 12:31:53 +0200 Subject: vhost: fix log ctx signalling The log eventfd signalling got put in dead code. We didn't notice because qemu currently does polling instead of eventfd select. Signed-off-by: Michael S. Tsirkin --- drivers/vhost/vhost.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index c579dcc9200c..dd3d6f7406f8 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -858,11 +858,12 @@ int vhost_log_write(struct vhost_virtqueue *vq, struct vhost_log *log, if (r < 0) return r; len -= l; - if (!len) + if (!len) { + if (vq->log_ctx) + eventfd_signal(vq->log_ctx, 1); return 0; + } } - if (vq->log_ctx) - eventfd_signal(vq->log_ctx, 1); /* Length written exceeds what we have stored. This is a bug. */ BUG(); return 0; -- cgit v1.2.2 From ec5a32f67c603b11d68eb283d94eb89a4f6cfce1 Mon Sep 17 00:00:00 2001 From: Luca Tettamanti Date: Wed, 22 Sep 2010 10:41:58 +0000 Subject: atl1: fix resume adapter->cmb.cmb is initialized when the device is opened and freed when it's closed. Accessing it unconditionally during resume results either in a crash (NULL pointer dereference, when the interface has not been opened yet) or data corruption (when the interface has been used and brought down adapter->cmb.cmb points to a deallocated memory area). Cc: stable@kernel.org Signed-off-by: Luca Tettamanti Acked-by: Chris Snook Signed-off-by: David S. Miller --- drivers/net/atlx/atl1.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 63b9ba0cc67e..bbd6e3009be0 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -2847,10 +2847,11 @@ static int atl1_resume(struct pci_dev *pdev) pci_enable_wake(pdev, PCI_D3cold, 0); atl1_reset_hw(&adapter->hw); - adapter->cmb.cmb->int_stats = 0; - if (netif_running(netdev)) + if (netif_running(netdev)) { + adapter->cmb.cmb->int_stats = 0; atl1_up(adapter); + } netif_device_attach(netdev); return 0; -- cgit v1.2.2 From 3f5a2a713aad28480d86b0add00c68484b54febc Mon Sep 17 00:00:00 2001 From: Luca Tettamanti Date: Wed, 22 Sep 2010 10:42:31 +0000 Subject: atl1: zero out CMB and SBM in atl1_free_ring_resources They are allocated in atl1_setup_ring_resources, zero out the pointers in atl1_free_ring_resources (like the other resources). Signed-off-by: Luca Tettamanti Acked-by: Chris Snook Signed-off-by: David S. Miller --- drivers/net/atlx/atl1.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index bbd6e3009be0..c73be2848319 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -1251,6 +1251,12 @@ static void atl1_free_ring_resources(struct atl1_adapter *adapter) rrd_ring->desc = NULL; rrd_ring->dma = 0; + + adapter->cmb.dma = 0; + adapter->cmb.cmb = NULL; + + adapter->smb.dma = 0; + adapter->smb.smb = NULL; } static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter) -- cgit v1.2.2 From 8395ae8303255b31a8625035fc98391c88b0c257 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 22 Sep 2010 17:15:08 +0000 Subject: e1000e: 82577/8/9 issues with device in Sx When going to Sx, disable gigabit in PHY (e1000_oem_bits_config_ich8lan) in addition to the MAC before configuring PHY wakeup otherwise the PHY configuration writes might be missed. Also write the LED configuration and SMBus address to the PHY registers (e1000_oem_bits_config_ich8lan and e1000_write_smbus_addr, respectively). The reset is no longer needed since re-auto-negotiation is forced in e1000_oem_bits_config_ich8lan and leaving it in causes issues with auto-negotiating the link. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 47 ++++++++++++++++++++++++++++++++++++-------- 1 file changed, 39 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 63930d12711c..822de4830c67 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -125,6 +125,7 @@ /* SMBus Address Phy Register */ #define HV_SMB_ADDR PHY_REG(768, 26) +#define HV_SMB_ADDR_MASK 0x007F #define HV_SMB_ADDR_PEC_EN 0x0200 #define HV_SMB_ADDR_VALID 0x0080 @@ -894,6 +895,34 @@ static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw) return (fwsm & E1000_ICH_FWSM_RSPCIPHY) ? 0 : E1000_BLK_PHY_RESET; } +/** + * e1000_write_smbus_addr - Write SMBus address to PHY needed during Sx states + * @hw: pointer to the HW structure + * + * Assumes semaphore already acquired. + * + **/ +static s32 e1000_write_smbus_addr(struct e1000_hw *hw) +{ + u16 phy_data; + u32 strap = er32(STRAP); + s32 ret_val = 0; + + strap &= E1000_STRAP_SMBUS_ADDRESS_MASK; + + ret_val = e1000_read_phy_reg_hv_locked(hw, HV_SMB_ADDR, &phy_data); + if (ret_val) + goto out; + + phy_data &= ~HV_SMB_ADDR_MASK; + phy_data |= (strap >> E1000_STRAP_SMBUS_ADDRESS_SHIFT); + phy_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID; + ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, phy_data); + +out: + return ret_val; +} + /** * e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration * @hw: pointer to the HW structure @@ -970,12 +999,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) * When both NVM bits are cleared, SW will configure * them instead. */ - data = er32(STRAP); - data &= E1000_STRAP_SMBUS_ADDRESS_MASK; - reg_data = data >> E1000_STRAP_SMBUS_ADDRESS_SHIFT; - reg_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID; - ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, - reg_data); + ret_val = e1000_write_smbus_addr(hw); if (ret_val) goto out; @@ -3460,13 +3484,20 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw) void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw) { u32 phy_ctrl; + s32 ret_val; phy_ctrl = er32(PHY_CTRL); phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU | E1000_PHY_CTRL_GBE_DISABLE; ew32(PHY_CTRL, phy_ctrl); - if (hw->mac.type >= e1000_pchlan) - e1000_phy_hw_reset_ich8lan(hw); + if (hw->mac.type >= e1000_pchlan) { + e1000_oem_bits_config_ich8lan(hw, true); + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return; + e1000_write_smbus_addr(hw); + hw->phy.ops.release(hw); + } } /** -- cgit v1.2.2 From 87fb7410cd8d4396dee0155526568645adba3b99 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 22 Sep 2010 17:15:33 +0000 Subject: e1000e: 82579 SMBus address and LEDs incorrect after device reset Since the hardware is prevented from performing automatic PHY configuration (the driver does it instead), the OEM_WRITE_ENABLE bit in the EXTCNF_CTRL register will not get cleared preventing the SMBus address and the LED configuration to be written to the PHY registers. On 82579, do not check the OEM_WRITE_ENABLE bit. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 822de4830c67..fc8c3cef0526 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -990,9 +990,9 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK; cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT; - if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) && - ((hw->mac.type == e1000_pchlan) || - (hw->mac.type == e1000_pch2lan))) { + if ((!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) && + (hw->mac.type == e1000_pchlan)) || + (hw->mac.type == e1000_pch2lan)) { /* * HW configures the SMBus address and LEDs when the * OEM and LCD Write Enable bits are set in the NVM. -- cgit v1.2.2 From 5f3eed6fe0e36e4b56c8dd9160241a868ee0de2a Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 22 Sep 2010 17:15:54 +0000 Subject: e1000e: 82566DC fails to get link Two recent patches to cleanup the reset[1] and initial PHY configuration[2] code paths for ICH/PCH devices inadvertently left out a 10msec delay and device ID check respectively which are necessary for the 82566DC (device id 0x104b) to be configured properly, otherwise it will not get link. [1] commit e98cac447cc1cc418dff1d610a5c79c4f2bdec7f [2] commit 3f0c16e84438d657d29446f85fe375794a93f159 CC: stable@kernel.org Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index fc8c3cef0526..6f9cb0d44d3a 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -932,7 +932,6 @@ out: **/ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) { - struct e1000_adapter *adapter = hw->adapter; struct e1000_phy_info *phy = &hw->phy; u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask; s32 ret_val = 0; @@ -950,7 +949,8 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) if (phy->type != e1000_phy_igp_3) return ret_val; - if (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_AMT) { + if ((hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_AMT) || + (hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_C)) { sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG; break; } @@ -1626,6 +1626,9 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw) if (e1000_check_reset_block(hw)) goto out; + /* Allow time for h/w to get to quiescent state after reset */ + msleep(10); + /* Perform any necessary post-reset workarounds */ switch (hw->mac.type) { case e1000_pchlan: -- cgit v1.2.2 From 831bd2e6a6c09588fdde453ecb858f050ac1b942 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 22 Sep 2010 17:16:18 +0000 Subject: e1000e: 82579 unaccounted missed packets On 82579, there is a hardware bug that can cause received packets to not get transferred from the PHY to the MAC due to K1 (a power saving feature of the PHY-MAC interconnect similar to ASPM L1). Since the MAC controls the accounting of missed packets, these will go unnoticed. Workaround the issue by setting the K1 beacon duration according to the link speed. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/hw.h | 1 + drivers/net/e1000e/ich8lan.c | 48 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 49 insertions(+) (limited to 'drivers') diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index 66ed08f726fb..ba302a5c2c30 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -57,6 +57,7 @@ enum e1e_registers { E1000_SCTL = 0x00024, /* SerDes Control - RW */ E1000_FCAL = 0x00028, /* Flow Control Address Low - RW */ E1000_FCAH = 0x0002C, /* Flow Control Address High -RW */ + E1000_FEXTNVM4 = 0x00024, /* Future Extended NVM 4 - RW */ E1000_FEXTNVM = 0x00028, /* Future Extended NVM - RW */ E1000_FCT = 0x00030, /* Flow Control Type - RW */ E1000_VET = 0x00038, /* VLAN Ether Type - RW */ diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 6f9cb0d44d3a..89b1e1aea526 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -105,6 +105,10 @@ #define E1000_FEXTNVM_SW_CONFIG 1 #define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* Bit redefined for ICH8M :/ */ +#define E1000_FEXTNVM4_BEACON_DURATION_MASK 0x7 +#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7 +#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3 + #define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL #define E1000_ICH_RAR_ENTRIES 7 @@ -238,6 +242,7 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw); static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw); static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw); +static s32 e1000_k1_workaround_lv(struct e1000_hw *hw); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -653,6 +658,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) goto out; } + if (hw->mac.type == e1000_pch2lan) { + ret_val = e1000_k1_workaround_lv(hw); + if (ret_val) + goto out; + } + /* * Check if there was DownShift, must be checked * immediately after link-up @@ -1582,6 +1593,43 @@ out: return ret_val; } +/** + * e1000_k1_gig_workaround_lv - K1 Si workaround + * @hw: pointer to the HW structure + * + * Workaround to set the K1 beacon duration for 82579 parts + **/ +static s32 e1000_k1_workaround_lv(struct e1000_hw *hw) +{ + s32 ret_val = 0; + u16 status_reg = 0; + u32 mac_reg; + + if (hw->mac.type != e1000_pch2lan) + goto out; + + /* Set K1 beacon duration based on 1Gbps speed or otherwise */ + ret_val = e1e_rphy(hw, HV_M_STATUS, &status_reg); + if (ret_val) + goto out; + + if ((status_reg & (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) + == (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) { + mac_reg = er32(FEXTNVM4); + mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; + + if (status_reg & HV_M_STATUS_SPEED_1000) + mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC; + else + mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC; + + ew32(FEXTNVM4, mac_reg); + } + +out: + return ret_val; +} + /** * e1000_lan_init_done_ich8lan - Check for PHY config completion * @hw: pointer to the HW structure -- cgit v1.2.2 From a1ce647378c0262fe72757f989e961b2de6460a5 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 22 Sep 2010 17:16:40 +0000 Subject: e1000e: 82579 jumbo frame workaround causing CRC errors The subject workaround was causing CRC errors due to writing the wrong register with updates of the RCTL register. It was also found that the workaround function which modifies the RCTL register was being called in the middle of a read-modify-write operation of the RCTL register, so the function call has been moved appropriately. Lastly, jumbo frames must not be allowed when CRC stripping is disabled by a module parameter because the workaround requires the CRC be stripped. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 12 +----------- drivers/net/e1000e/netdev.c | 29 +++++++++++++++++++---------- 2 files changed, 20 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 89b1e1aea526..bb346ae3d9a0 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -1475,10 +1475,6 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable) goto out; /* Enable jumbo frame workaround in the PHY */ - e1e_rphy(hw, PHY_REG(769, 20), &data); - ret_val = e1e_wphy(hw, PHY_REG(769, 20), data & ~(1 << 14)); - if (ret_val) - goto out; e1e_rphy(hw, PHY_REG(769, 23), &data); data &= ~(0x7F << 5); data |= (0x37 << 5); @@ -1487,7 +1483,6 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable) goto out; e1e_rphy(hw, PHY_REG(769, 16), &data); data &= ~(1 << 13); - data |= (1 << 12); ret_val = e1e_wphy(hw, PHY_REG(769, 16), data); if (ret_val) goto out; @@ -1512,7 +1507,7 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable) mac_reg = er32(RCTL); mac_reg &= ~E1000_RCTL_SECRC; - ew32(FFLT_DBG, mac_reg); + ew32(RCTL, mac_reg); ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_CTRL_OFFSET, @@ -1538,17 +1533,12 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable) goto out; /* Write PHY register values back to h/w defaults */ - e1e_rphy(hw, PHY_REG(769, 20), &data); - ret_val = e1e_wphy(hw, PHY_REG(769, 20), data & ~(1 << 14)); - if (ret_val) - goto out; e1e_rphy(hw, PHY_REG(769, 23), &data); data &= ~(0x7F << 5); ret_val = e1e_wphy(hw, PHY_REG(769, 23), data); if (ret_val) goto out; e1e_rphy(hw, PHY_REG(769, 16), &data); - data &= ~(1 << 12); data |= (1 << 13); ret_val = e1e_wphy(hw, PHY_REG(769, 16), data); if (ret_val) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 2b8ef44bd2b1..e561d15c3eb1 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -2704,6 +2704,16 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) u32 psrctl = 0; u32 pages = 0; + /* Workaround Si errata on 82579 - configure jumbo frame flow */ + if (hw->mac.type == e1000_pch2lan) { + s32 ret_val; + + if (adapter->netdev->mtu > ETH_DATA_LEN) + ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true); + else + ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false); + } + /* Program MC offset vector base */ rctl = er32(RCTL); rctl &= ~(3 << E1000_RCTL_MO_SHIFT); @@ -2744,16 +2754,6 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) e1e_wphy(hw, 22, phy_data); } - /* Workaround Si errata on 82579 - configure jumbo frame flow */ - if (hw->mac.type == e1000_pch2lan) { - s32 ret_val; - - if (rctl & E1000_RCTL_LPE) - ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true); - else - ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false); - } - /* Setup buffer sizes */ rctl &= ~E1000_RCTL_SZ_4096; rctl |= E1000_RCTL_BSEX; @@ -4833,6 +4833,15 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) return -EINVAL; } + /* Jumbo frame workaround on 82579 requires CRC be stripped */ + if ((adapter->hw.mac.type == e1000_pch2lan) && + !(adapter->flags2 & FLAG2_CRC_STRIPPING) && + (new_mtu > ETH_DATA_LEN)) { + e_err("Jumbo Frames not supported on 82579 when CRC " + "stripping is disabled.\n"); + return -EINVAL; + } + /* 82573 Errata 17 */ if (((adapter->hw.mac.type == e1000_82573) || (adapter->hw.mac.type == e1000_82574)) && -- cgit v1.2.2 From 605c82bab5abe0816e5e32716875c245f89f39da Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 22 Sep 2010 17:17:01 +0000 Subject: e1000e: 82579 do not gate auto config of PHY by hardware during nominal use For non-managed versions of 82579, set the bit that prevents the hardware from automatically configuring the PHY after resets only when the driver performs a reset, clear the bit after resets. This is so the hardware can configure the PHY automatically when the part is reset in a manner that is not controlled by the driver (e.g. in a virtual environment via PCI FLR) otherwise the PHY will be mis-configured causing issues such as failing to link at 1000Mbps. For managed versions of 82579, keep the previous behavior since the manageability firmware will handle the PHY configuration. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 77 ++++++++++++++++++++++++++++++++++++++------ 1 file changed, 68 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index bb346ae3d9a0..57b5435599ab 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -243,6 +243,7 @@ static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw); static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw); static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw); static s32 e1000_k1_workaround_lv(struct e1000_hw *hw); +static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -278,7 +279,7 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val) static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; - u32 ctrl; + u32 ctrl, fwsm; s32 ret_val = 0; phy->addr = 1; @@ -300,7 +301,8 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) * disabled, then toggle the LANPHYPC Value bit to force * the interconnect to PCIe mode. */ - if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { + fwsm = er32(FWSM); + if (!(fwsm & E1000_ICH_FWSM_FW_VALID)) { ctrl = er32(CTRL); ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE; ctrl &= ~E1000_CTRL_LANPHYPC_VALUE; @@ -309,6 +311,13 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE; ew32(CTRL, ctrl); msleep(50); + + /* + * Gate automatic PHY configuration by hardware on + * non-managed 82579 + */ + if (hw->mac.type == e1000_pch2lan) + e1000_gate_hw_phy_config_ich8lan(hw, true); } /* @@ -321,6 +330,13 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) if (ret_val) goto out; + /* Ungate automatic PHY configuration on non-managed 82579 */ + if ((hw->mac.type == e1000_pch2lan) && + !(fwsm & E1000_ICH_FWSM_FW_VALID)) { + msleep(10); + e1000_gate_hw_phy_config_ich8lan(hw, false); + } + phy->id = e1000_phy_unknown; ret_val = e1000e_get_phy_id(hw); if (ret_val) @@ -567,13 +583,10 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter) if (mac->type == e1000_ich8lan) e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true); - /* Disable PHY configuration by hardware, config by software */ - if (mac->type == e1000_pch2lan) { - u32 extcnf_ctrl = er32(EXTCNF_CTRL); - - extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG; - ew32(EXTCNF_CTRL, extcnf_ctrl); - } + /* Gate automatic PHY configuration by hardware on managed 82579 */ + if ((mac->type == e1000_pch2lan) && + (er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) + e1000_gate_hw_phy_config_ich8lan(hw, true); return 0; } @@ -1620,6 +1633,32 @@ out: return ret_val; } +/** + * e1000_gate_hw_phy_config_ich8lan - disable PHY config via hardware + * @hw: pointer to the HW structure + * @gate: boolean set to true to gate, false to ungate + * + * Gate/ungate the automatic PHY configuration via hardware; perform + * the configuration via software instead. + **/ +static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate) +{ + u32 extcnf_ctrl; + + if (hw->mac.type != e1000_pch2lan) + return; + + extcnf_ctrl = er32(EXTCNF_CTRL); + + if (gate) + extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG; + else + extcnf_ctrl &= ~E1000_EXTCNF_CTRL_GATE_PHY_CFG; + + ew32(EXTCNF_CTRL, extcnf_ctrl); + return; +} + /** * e1000_lan_init_done_ich8lan - Check for PHY config completion * @hw: pointer to the HW structure @@ -1695,6 +1734,13 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw) /* Configure the LCD with the OEM bits in NVM */ ret_val = e1000_oem_bits_config_ich8lan(hw, true); + /* Ungate automatic PHY configuration on non-managed 82579 */ + if ((hw->mac.type == e1000_pch2lan) && + !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { + msleep(10); + e1000_gate_hw_phy_config_ich8lan(hw, false); + } + out: return ret_val; } @@ -1711,6 +1757,11 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) { s32 ret_val = 0; + /* Gate automatic PHY configuration by hardware on non-managed 82579 */ + if ((hw->mac.type == e1000_pch2lan) && + !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) + e1000_gate_hw_phy_config_ich8lan(hw, true); + ret_val = e1000e_phy_hw_reset_generic(hw); if (ret_val) goto out; @@ -2975,6 +3026,14 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) * external PHY is reset. */ ctrl |= E1000_CTRL_PHY_RST; + + /* + * Gate automatic PHY configuration by hardware on + * non-managed 82579 + */ + if ((hw->mac.type == e1000_pch2lan) && + !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) + e1000_gate_hw_phy_config_ich8lan(hw, true); } ret_val = e1000_acquire_swflag_ich8lan(hw); e_dbg("Issuing a global reset to ich8lan\n"); -- cgit v1.2.2 From e0f9c4f332c99b213d4a0b7cd21dc0781ceb3d86 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Thu, 23 Sep 2010 10:59:18 +0000 Subject: de2104x: disable autonegotiation on broken hardware At least on older 21041-AA chips (mine is rev. 11), TP duplex autonegotiation causes the card not to work at all (link is up but no packets are transmitted). de4x5 disables autonegotiation completely. But it seems to work on newer (21041-PA rev. 21) so disable it only on rev<20 chips. Signed-off-by: Ondrej Zary Acked-by: Jeff Garzik Signed-off-by: David S. Miller --- drivers/net/tulip/de2104x.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index 5efa57757a2c..9d6b7e9c7a6b 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -364,6 +364,8 @@ static u16 t21040_csr15[] = { 0, 0, 0x0006, 0x0000, 0x0000, }; /* 21041 transceiver register settings: TP AUTO, BNC, AUI, TP, TP FD*/ static u16 t21041_csr13[] = { 0xEF01, 0xEF09, 0xEF09, 0xEF01, 0xEF09, }; static u16 t21041_csr14[] = { 0xFFFF, 0xF7FD, 0xF7FD, 0x6F3F, 0x6F3D, }; +/* If on-chip autonegotiation is broken, use half-duplex (FF3F) instead */ +static u16 t21041_csr14_brk[] = { 0xFF3F, 0xF7FD, 0xF7FD, 0x6F3F, 0x6F3D, }; static u16 t21041_csr15[] = { 0x0008, 0x0006, 0x000E, 0x0008, 0x0008, }; @@ -1911,8 +1913,14 @@ fill_defaults: for (i = 0; i < DE_MAX_MEDIA; i++) { if (de->media[i].csr13 == 0xffff) de->media[i].csr13 = t21041_csr13[i]; - if (de->media[i].csr14 == 0xffff) - de->media[i].csr14 = t21041_csr14[i]; + if (de->media[i].csr14 == 0xffff) { + /* autonegotiation is broken at least on some chip + revisions - rev. 0x21 works, 0x11 does not */ + if (de->pdev->revision < 0x20) + de->media[i].csr14 = t21041_csr14_brk[i]; + else + de->media[i].csr14 = t21041_csr14[i]; + } if (de->media[i].csr15 == 0xffff) de->media[i].csr15 = t21041_csr15[i]; } -- cgit v1.2.2 From b0255a02351b00ca55f4eb2588d05a5db9dd1a58 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Fri, 24 Sep 2010 23:57:02 +0000 Subject: de2104x: fix power management At least my 21041 cards come out of suspend with bus mastering disabled so they did not work after resume(no data transferred). After adding pci_set_master(), the driver oopsed immediately on resume - because de_clean_rings() is called on suspend but de_init_rings() call was missing in resume. Also disable link (reset SIA) before sleep (de4x5 does this too). Signed-off-by: Ondrej Zary Acked-by: Jeff Garzik Signed-off-by: David S. Miller --- drivers/net/tulip/de2104x.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index 9d6b7e9c7a6b..a0be7c28c587 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -1231,6 +1231,7 @@ static void de_adapter_sleep (struct de_private *de) if (de->de21040) return; + dw32(CSR13, 0); /* Reset phy */ pci_read_config_dword(de->pdev, PCIPM, &pmctl); pmctl |= PM_Sleep; pci_write_config_dword(de->pdev, PCIPM, pmctl); @@ -2166,6 +2167,8 @@ static int de_resume (struct pci_dev *pdev) dev_err(&dev->dev, "pci_enable_device failed in resume\n"); goto out; } + pci_set_master(pdev); + de_init_rings(de); de_init_hw(de); out_attach: netif_device_attach(dev); -- cgit v1.2.2 From ca9a783575d2affed30ef27a3427a7705527ddac Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Sat, 25 Sep 2010 10:39:17 +0000 Subject: de2104x: fix TP link detection Compex FreedomLine 32 PnP-PCI2 cards have only TP and BNC connectors but the SROM contains AUI port too. When TP loses link, the driver switches to non-existing AUI port (which reports that carrier is always present). Connecting TP back generates LinkPass interrupt but de_media_interrupt() is broken - it only updates the link state of currently connected media, ignoring the fact that LinkPass and LinkFail bits of MacStatus register belong to the TP port only (the chip documentation says that). This patch changes de_media_interrupt() to switch media to TP when link goes up (and media type is not locked) and also to update the link state only when the TP port is used. Also the NonselPortActive (and also SelPortActive) bits of SIAStatus register need to be cleared (by writing 1) after reading or they're useless. Signed-off-by: Ondrej Zary Acked-by: Jeff Garzik Signed-off-by: David S. Miller --- drivers/net/tulip/de2104x.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index a0be7c28c587..9124c5c638d8 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -243,6 +243,7 @@ enum { NWayState = (1 << 14) | (1 << 13) | (1 << 12), NWayRestart = (1 << 12), NonselPortActive = (1 << 9), + SelPortActive = (1 << 8), LinkFailStatus = (1 << 2), NetCxnErr = (1 << 1), }; @@ -1066,6 +1067,9 @@ static void de21041_media_timer (unsigned long data) unsigned int carrier; unsigned long flags; + /* clear port active bits */ + dw32(SIAStatus, NonselPortActive | SelPortActive); + carrier = (status & NetCxnErr) ? 0 : 1; if (carrier) { @@ -1160,14 +1164,29 @@ no_link_yet: static void de_media_interrupt (struct de_private *de, u32 status) { if (status & LinkPass) { + /* Ignore if current media is AUI or BNC and we can't use TP */ + if ((de->media_type == DE_MEDIA_AUI || + de->media_type == DE_MEDIA_BNC) && + (de->media_lock || + !de_ok_to_advertise(de, DE_MEDIA_TP_AUTO))) + return; + /* If current media is not TP, change it to TP */ + if ((de->media_type == DE_MEDIA_AUI || + de->media_type == DE_MEDIA_BNC)) { + de->media_type = DE_MEDIA_TP_AUTO; + de_stop_rxtx(de); + de_set_media(de); + de_start_rxtx(de); + } de_link_up(de); mod_timer(&de->media_timer, jiffies + DE_TIMER_LINK); return; } BUG_ON(!(status & LinkFail)); - - if (netif_carrier_ok(de->dev)) { + /* Mark the link as down only if current media is TP */ + if (netif_carrier_ok(de->dev) && de->media_type != DE_MEDIA_AUI && + de->media_type != DE_MEDIA_BNC) { de_link_down(de); mod_timer(&de->media_timer, jiffies + DE_TIMER_NO_LINK); } -- cgit v1.2.2 From 62038e4a146b97352d5911e6ede36c58d4187c3e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Vincent=20Stehl=C3=A9?= Date: Sun, 26 Sep 2010 18:50:05 -0700 Subject: smsc911x: Add MODULE_ALIAS() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This enables auto loading for the smsc911x ethernet driver. Signed-off-by: Vincent Stehlé Signed-off-by: David S. Miller --- drivers/net/smsc911x.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index 0909ae934ad0..8150ba154116 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -58,6 +58,7 @@ MODULE_LICENSE("GPL"); MODULE_VERSION(SMSC_DRV_VERSION); +MODULE_ALIAS("platform:smsc911x"); #if USE_DEBUG > 0 static int debug = 16; -- cgit v1.2.2 From 52933f052186877afd218aef7a1b2dbdb010939f Mon Sep 17 00:00:00 2001 From: Kulikov Vasiliy Date: Sat, 25 Sep 2010 23:58:00 +0000 Subject: ibm_newemac: use free_netdev(netdev) instead of kfree() Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller --- drivers/net/ibm_newemac/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index 3506fd6ad726..519e19e23955 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -2928,7 +2928,7 @@ static int __devinit emac_probe(struct platform_device *ofdev, if (dev->emac_irq != NO_IRQ) irq_dispose_mapping(dev->emac_irq); err_free: - kfree(ndev); + free_netdev(ndev); err_gone: /* if we were on the bootlist, remove us as we won't show up and * wake up all waiters to notify them in case they were waiting @@ -2971,7 +2971,7 @@ static int __devexit emac_remove(struct platform_device *ofdev) if (dev->emac_irq != NO_IRQ) irq_dispose_mapping(dev->emac_irq); - kfree(dev->ndev); + free_netdev(dev->ndev); return 0; } -- cgit v1.2.2 From 22138d307329e1968fc698821095b87c2fd5de12 Mon Sep 17 00:00:00 2001 From: Kulikov Vasiliy Date: Sat, 25 Sep 2010 23:58:03 +0000 Subject: rionet: use free_netdev(netdev) instead of kfree() Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller --- drivers/net/rionet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c index 07eb884ff982..44150f2f7bfd 100644 --- a/drivers/net/rionet.c +++ b/drivers/net/rionet.c @@ -384,7 +384,7 @@ static void rionet_remove(struct rio_dev *rdev) free_pages((unsigned long)rionet_active, rdev->net->hport->sys_size ? __ilog2(sizeof(void *)) + 4 : 0); unregister_netdev(ndev); - kfree(ndev); + free_netdev(ndev); list_for_each_entry_safe(peer, tmp, &rionet_peers, node) { list_del(&peer->node); -- cgit v1.2.2 From 8d879de89807d82bc4cc3e9d73609b874fa9458c Mon Sep 17 00:00:00 2001 From: Kulikov Vasiliy Date: Sat, 25 Sep 2010 23:58:06 +0000 Subject: sgiseeq: use free_netdev(netdev) instead of kfree() Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller --- drivers/net/sgiseeq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c index cc4bd8c65f8b..9265315baa0b 100644 --- a/drivers/net/sgiseeq.c +++ b/drivers/net/sgiseeq.c @@ -804,7 +804,7 @@ static int __devinit sgiseeq_probe(struct platform_device *pdev) err_out_free_page: free_page((unsigned long) sp->srings); err_out_free_dev: - kfree(dev); + free_netdev(dev); err_out: return err; -- cgit v1.2.2 From bc68580d41b131396054a1a04a7df4948555ed97 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Sun, 26 Sep 2010 18:56:06 -0700 Subject: s390: use free_netdev(netdev) instead of kfree() Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller --- drivers/s390/net/ctcm_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c index 6edf20b62de5..2c7d2d9be4d0 100644 --- a/drivers/s390/net/ctcm_main.c +++ b/drivers/s390/net/ctcm_main.c @@ -1154,7 +1154,7 @@ static struct net_device *ctcm_init_netdevice(struct ctcm_priv *priv) dev_fsm, dev_fsm_len, GFP_KERNEL); if (priv->fsm == NULL) { CTCMY_DBF_DEV(SETUP, dev, "init_fsm error"); - kfree(dev); + free_netdev(dev); return NULL; } fsm_newstate(priv->fsm, DEV_STATE_STOPPED); @@ -1165,7 +1165,7 @@ static struct net_device *ctcm_init_netdevice(struct ctcm_priv *priv) grp = ctcmpc_init_mpc_group(priv); if (grp == NULL) { MPC_DBF_DEV(SETUP, dev, "init_mpc_group error"); - kfree(dev); + free_netdev(dev); return NULL; } tasklet_init(&grp->mpc_tasklet2, -- cgit v1.2.2 From 3fd6c88ef875a14740801ebfc6b6e4e064a1cdd4 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 27 Sep 2010 11:07:00 -0700 Subject: 3c59x: fix regression from patch "Add ethtool WOL support" This patch (commit 690a1f2002a3091bd18a501f46c9530f10481463) added a new call site for acpi_set_WOL() without checking that the function is actually suitable to be called via vortex_set_wol+0xcd/0xe0 [3c59x] dev_ethtool+0xa5a/0xb70 dev_ioctl+0x2e0/0x4b0 T.961+0x49/0x50 sock_ioctl+0x47/0x290 do_vfs_ioctl+0x7f/0x340 sys_ioctl+0x80/0xa0 system_call_fastpath+0x16/0x1b i.e. outside of code paths run when the device is not yet enabled or already disabled. In particular, putting the device into D3hot is a pretty bad idea when it was already brought up. Furthermore, all prior callers of the function made sure they're actually dealing with a PCI device, while the newly added one didn't. In the same spirit, the .get_wol handler shouldn't indicate support for WOL for non-PCI devices. Signed-off-by: Jan Beulich Signed-off-by: David S. Miller --- drivers/net/3c59x.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index fa42103b2874..179871d9e71f 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -2942,6 +2942,9 @@ static void vortex_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct vortex_private *vp = netdev_priv(dev); + if (!VORTEX_PCI(vp)) + return; + wol->supported = WAKE_MAGIC; wol->wolopts = 0; @@ -2952,6 +2955,10 @@ static void vortex_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) static int vortex_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct vortex_private *vp = netdev_priv(dev); + + if (!VORTEX_PCI(vp)) + return -EOPNOTSUPP; + if (wol->wolopts & ~WAKE_MAGIC) return -EINVAL; @@ -3201,6 +3208,9 @@ static void acpi_set_WOL(struct net_device *dev) return; } + if (VORTEX_PCI(vp)->current_state < PCI_D3hot) + return; + /* Change the power state to D3; RxEnable doesn't take effect. */ pci_set_power_state(VORTEX_PCI(vp), PCI_D3hot); } -- cgit v1.2.2 From 387a85628782690b56492dae4bbf544639f5d4a9 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Mon, 27 Sep 2010 11:41:45 +0000 Subject: de2104x: fix ethtool When the interface is up, using ethtool breaks it because: a) link is put down but media_timer interval is not shortened to NO_LINK b) rxtx is stopped but not restarted Also manual 10baseT-HD (and probably FD too - untested) mode does not work - the link is forced up, packets are transmitted but nothing is received. Changing CSR14 value to match documentation (not disabling link check) fixes this. Signed-off-by: Ondrej Zary Acked-by: Jeff Garzik Signed-off-by: David S. Miller --- drivers/net/tulip/de2104x.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index 9124c5c638d8..6888e3d41462 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -364,9 +364,9 @@ static u16 t21040_csr15[] = { 0, 0, 0x0006, 0x0000, 0x0000, }; /* 21041 transceiver register settings: TP AUTO, BNC, AUI, TP, TP FD*/ static u16 t21041_csr13[] = { 0xEF01, 0xEF09, 0xEF09, 0xEF01, 0xEF09, }; -static u16 t21041_csr14[] = { 0xFFFF, 0xF7FD, 0xF7FD, 0x6F3F, 0x6F3D, }; +static u16 t21041_csr14[] = { 0xFFFF, 0xF7FD, 0xF7FD, 0x7F3F, 0x7F3D, }; /* If on-chip autonegotiation is broken, use half-duplex (FF3F) instead */ -static u16 t21041_csr14_brk[] = { 0xFF3F, 0xF7FD, 0xF7FD, 0x6F3F, 0x6F3D, }; +static u16 t21041_csr14_brk[] = { 0xFF3F, 0xF7FD, 0xF7FD, 0x7F3F, 0x7F3D, }; static u16 t21041_csr15[] = { 0x0008, 0x0006, 0x000E, 0x0008, 0x0008, }; @@ -1596,12 +1596,15 @@ static int __de_set_settings(struct de_private *de, struct ethtool_cmd *ecmd) return 0; /* nothing to change */ de_link_down(de); + mod_timer(&de->media_timer, jiffies + DE_TIMER_NO_LINK); de_stop_rxtx(de); de->media_type = new_media; de->media_lock = media_lock; de->media_advertise = ecmd->advertising; de_set_media(de); + if (netif_running(de->dev)) + de_start_rxtx(de); return 0; } -- cgit v1.2.2