From 4da361b69102cdffe73006771eae7504d2cb8736 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Mon, 15 Mar 2010 14:55:40 +0100 Subject: HID: register debugfs entries before adding device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Register debugfs entries before calling device_add() so debugfs entries are already present when HID driver's probe function gets called on device hotplug. Also undo debugfs entry registration if device_add() fails so status HID_STAT_ADDED and debugfs registration status remain consistent and we don't leak the debugfs entries. Signed-off-by: Bruno Prémont Cc: Alan Stern Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 368fbb0c4ca6..7396f47c79db 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1768,11 +1768,12 @@ int hid_add_device(struct hid_device *hdev) dev_set_name(&hdev->dev, "%04X:%04X:%04X.%04X", hdev->bus, hdev->vendor, hdev->product, atomic_inc_return(&id)); + hid_debug_register(hdev, dev_name(&hdev->dev)); ret = device_add(&hdev->dev); if (!ret) hdev->status |= HID_STAT_ADDED; - - hid_debug_register(hdev, dev_name(&hdev->dev)); + else + hid_debug_unregister(hdev); return ret; } -- cgit v1.2.2 From 59d2334ac9f4255f5f8f3e4e1bf41653e0bba99e Mon Sep 17 00:00:00 2001 From: Przemo Firszt Date: Mon, 15 Mar 2010 19:16:23 +0000 Subject: HID: expose wacom pen tablet battery through power_supply class This patch exposes wacom pen tablet battery capacity and ac state thru power_supply class is sysfs. Signed-off-by: Przemo Firszt Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 8 +++ drivers/hid/hid-wacom.c | 127 ++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 135 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 71d4c0703629..8e1b505b5bf2 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -357,6 +357,14 @@ config HID_WACOM ---help--- Support for Wacom Graphire Bluetooth tablet. +config HID_WACOM_POWER_SUPPLY + bool "Wacom Bluetooth devices power supply status support" + depends on HID_WACOM + select POWER_SUPPLY + ---help--- + Say Y here if you want to enable power supply status monitoring for + Wacom Bluetooth devices. + config HID_ZEROPLUS tristate "Zeroplus based game controller support" if EMBEDDED depends on USB_HID diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index 8d3b46f5d149..4d2d2a2e1a5f 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -21,14 +21,88 @@ #include #include #include +#ifdef CONFIG_HID_WACOM_POWER_SUPPLY +#include +#endif #include "hid-ids.h" struct wacom_data { __u16 tool; unsigned char butstate; +#ifdef CONFIG_HID_WACOM_POWER_SUPPLY + int battery_capacity; + struct power_supply battery; + struct power_supply ac; +#endif }; +#ifdef CONFIG_HID_WACOM_POWER_SUPPLY +/*percent of battery capacity, 0 means AC online*/ +static unsigned short batcap[8] = { 1, 15, 25, 35, 50, 70, 100, 0 }; + +static enum power_supply_property wacom_battery_props[] = { + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_CAPACITY +}; + +static enum power_supply_property wacom_ac_props[] = { + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE +}; + +static int wacom_battery_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct wacom_data *wdata = container_of(psy, + struct wacom_data, battery); + int power_state = batcap[wdata->battery_capacity]; + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_PRESENT: + val->intval = 1; + break; + case POWER_SUPPLY_PROP_CAPACITY: + /* show 100% battery capacity when charging */ + if (power_state == 0) + val->intval = 100; + else + val->intval = power_state; + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static int wacom_ac_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct wacom_data *wdata = container_of(psy, struct wacom_data, ac); + int power_state = batcap[wdata->battery_capacity]; + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_PRESENT: + /* fall through */ + case POWER_SUPPLY_PROP_ONLINE: + if (power_state == 0) + val->intval = 1; + else + val->intval = 0; + break; + default: + ret = -EINVAL; + break; + } + return ret; +} +#endif + static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *raw_data, int size) { @@ -147,6 +221,12 @@ static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report, input_sync(input); } +#ifdef CONFIG_HID_WACOM_POWER_SUPPLY + /* Store current battery capacity */ + rw = (data[7] >> 2 & 0x07); + if (rw != wdata->battery_capacity) + wdata->battery_capacity = rw; +#endif return 1; } @@ -206,6 +286,45 @@ static int wacom_probe(struct hid_device *hdev, if (ret < 0) dev_warn(&hdev->dev, "failed to poke device #2, %d\n", ret); +#ifdef CONFIG_HID_WACOM_POWER_SUPPLY + wdata->battery.properties = wacom_battery_props; + wdata->battery.num_properties = ARRAY_SIZE(wacom_battery_props); + wdata->battery.get_property = wacom_battery_get_property; + wdata->battery.name = "wacom_battery"; + wdata->battery.type = POWER_SUPPLY_TYPE_BATTERY; + wdata->battery.use_for_apm = 0; + + ret = power_supply_register(&hdev->dev, &wdata->battery); + if (ret) { + dev_warn(&hdev->dev, + "can't create sysfs battery attribute, err: %d\n", ret); + /* + * battery attribute is not critical for the tablet, but if it + * failed then there is no need to create ac attribute + */ + goto move_on; + } + + wdata->ac.properties = wacom_ac_props; + wdata->ac.num_properties = ARRAY_SIZE(wacom_ac_props); + wdata->ac.get_property = wacom_ac_get_property; + wdata->ac.name = "wacom_ac"; + wdata->ac.type = POWER_SUPPLY_TYPE_MAINS; + wdata->ac.use_for_apm = 0; + + ret = power_supply_register(&hdev->dev, &wdata->ac); + if (ret) { + dev_warn(&hdev->dev, + "can't create ac battery attribute, err: %d\n", ret); + /* + * ac attribute is not critical for the tablet, but if it + * failed then we don't want to battery attribute to exist + */ + power_supply_unregister(&wdata->battery); + } + +move_on: +#endif hidinput = list_entry(hdev->inputs.next, struct hid_input, list); input = hidinput->input; @@ -250,7 +369,15 @@ err_free: static void wacom_remove(struct hid_device *hdev) { +#ifdef CONFIG_HID_WACOM_POWER_SUPPLY + struct wacom_data *wdata = hid_get_drvdata(hdev); +#endif hid_hw_stop(hdev); + +#ifdef CONFIG_HID_WACOM_POWER_SUPPLY + power_supply_unregister(&wdata->battery); + power_supply_unregister(&wdata->ac); +#endif kfree(hid_get_drvdata(hdev)); } -- cgit v1.2.2 From 1caea61eda5c4d446147aa0e712ba395bb6b81c3 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 18 Mar 2010 12:09:53 +0100 Subject: HID: output event in debugfs even if hid_get_report() fails if hid_get_report() fails for whatever reason, the raw output of the report doesn't make it into 'events' file in debugfs at all, because we leave hid_input_report() too soon. We want the report to be always present for debugging reasons. Move the code around, so that the event makes it to 'events' file all the time, even if we are going to discard the report. Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 368fbb0c4ca6..c49aaa21e1a7 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1096,20 +1096,11 @@ int hid_input_report(struct hid_device *hid, int type, u8 *data, int size, int i goto nomem; } - snprintf(buf, HID_DEBUG_BUFSIZE - 1, - "\nreport (size %u) (%snumbered)\n", size, report_enum->numbered ? "" : "un"); - hid_debug_event(hid, buf); - - report = hid_get_report(report_enum, data); - if (!report) { - kfree(buf); - return -1; - } - /* dump the report */ snprintf(buf, HID_DEBUG_BUFSIZE - 1, - "report %d (size %u) = ", report->id, size); + "\nreport (size %u) (%snumbered) = ", size, report_enum->numbered ? "" : "un"); hid_debug_event(hid, buf); + for (i = 0; i < size; i++) { snprintf(buf, HID_DEBUG_BUFSIZE - 1, " %02x", data[i]); @@ -1117,6 +1108,13 @@ int hid_input_report(struct hid_device *hid, int type, u8 *data, int size, int i } hid_debug_event(hid, "\n"); + report = hid_get_report(report_enum, data); + + if (!report) { + kfree(buf); + return -1; + } + kfree(buf); nomem: -- cgit v1.2.2 From f77e347bd44e3640bdc56003b7402c63ddb1241d Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 18 Mar 2010 14:11:53 +0100 Subject: HID: simplify error handling in hid_input_report() The handling of failed debugging buffer allocation got overly complicated. We simply want to skip the debugging code if allocation fails and go on with event processing. Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index c49aaa21e1a7..86cb2c47e9ea 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1091,10 +1091,8 @@ int hid_input_report(struct hid_device *hid, int type, u8 *data, int size, int i buf = kmalloc(sizeof(char) * HID_DEBUG_BUFSIZE, GFP_ATOMIC); - if (!buf) { - report = hid_get_report(report_enum, data); + if (!buf) goto nomem; - } /* dump the report */ snprintf(buf, HID_DEBUG_BUFSIZE - 1, @@ -1107,17 +1105,14 @@ int hid_input_report(struct hid_device *hid, int type, u8 *data, int size, int i hid_debug_event(hid, buf); } hid_debug_event(hid, "\n"); + kfree(buf); +nomem: report = hid_get_report(report_enum, data); - if (!report) { - kfree(buf); + if (!report) return -1; - } - - kfree(buf); -nomem: if (hdrv && hdrv->raw_event && hid_match_report(hid, report)) { ret = hdrv->raw_event(hid, report, data, size); if (ret != 0) -- cgit v1.2.2 From 06c7c313b5605471e321337c770683cf70464197 Mon Sep 17 00:00:00 2001 From: Przemo Firszt Date: Mon, 22 Mar 2010 09:55:04 +0100 Subject: HID: separate mode switching function for wacom bluetooth driver wacom_poke function allows to switch tablet reporting speed. The patch dosen't add any new functionality, but it's preparation for user-space speed switching through sysfs. Signed-off-by: Przemo Firszt Signed-off-by: Bastien Nocera Signed-off-by: Jiri Kosina --- drivers/hid/hid-wacom.c | 66 ++++++++++++++++++++++++++++++------------------- 1 file changed, 40 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index 4d2d2a2e1a5f..f9d493931b02 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -103,6 +103,44 @@ static int wacom_ac_get_property(struct power_supply *psy, } #endif +static void wacom_poke(struct hid_device *hdev, u8 speed) +{ + int limit, ret; + char rep_data[2]; + + rep_data[0] = 0x03 ; rep_data[1] = 0x00; + limit = 3; + do { + ret = hdev->hid_output_raw_report(hdev, rep_data, 2, + HID_FEATURE_REPORT); + } while (ret < 0 && limit-- > 0); + + if (ret >= 0) { + if (speed == 0) + rep_data[0] = 0x05; + else + rep_data[0] = 0x06; + + rep_data[1] = 0x00; + limit = 3; + do { + ret = hdev->hid_output_raw_report(hdev, rep_data, 2, + HID_FEATURE_REPORT); + } while (ret < 0 && limit-- > 0); + + if (ret >= 0) + return; + } + + /* + * Note that if the raw queries fail, it's not a hard failure and it + * is safe to continue + */ + dev_warn(&hdev->dev, "failed to poke device, command %d, err %d\n", + rep_data[0], ret); + return; +} + static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *raw_data, int size) { @@ -236,9 +274,7 @@ static int wacom_probe(struct hid_device *hdev, struct hid_input *hidinput; struct input_dev *input; struct wacom_data *wdata; - char rep_data[2]; int ret; - int limit; wdata = kzalloc(sizeof(*wdata), GFP_KERNEL); if (wdata == NULL) { @@ -261,30 +297,8 @@ static int wacom_probe(struct hid_device *hdev, goto err_free; } - /* - * Note that if the raw queries fail, it's not a hard failure and it - * is safe to continue - */ - - /* Set Wacom mode2 */ - rep_data[0] = 0x03; rep_data[1] = 0x00; - limit = 3; - do { - ret = hdev->hid_output_raw_report(hdev, rep_data, 2, - HID_FEATURE_REPORT); - } while (ret < 0 && limit-- > 0); - if (ret < 0) - dev_warn(&hdev->dev, "failed to poke device #1, %d\n", ret); - - /* 0x06 - high reporting speed, 0x05 - low speed */ - rep_data[0] = 0x06; rep_data[1] = 0x00; - limit = 3; - do { - ret = hdev->hid_output_raw_report(hdev, rep_data, 2, - HID_FEATURE_REPORT); - } while (ret < 0 && limit-- > 0); - if (ret < 0) - dev_warn(&hdev->dev, "failed to poke device #2, %d\n", ret); + /* Set Wacom mode 2 with high reporting speed */ + wacom_poke(hdev, 1); #ifdef CONFIG_HID_WACOM_POWER_SUPPLY wdata->battery.properties = wacom_battery_props; -- cgit v1.2.2 From 20a3ce7e490c5015d051f78414f6dd146eec283f Mon Sep 17 00:00:00 2001 From: Przemo Firszt Date: Thu, 18 Mar 2010 14:34:34 +0000 Subject: HID: add sysfs speed attribute for wacom bluetooth tablet The attribute allows to change reporting speed of tablet from userspace through sysfs file. The attribute is RW, valid values: 0 is low speed, 1 is high speed. High speed is the default setting. Using low speed is a workaround if you experience lag when using the tablet. Signed-off-by: Przemo Firszt Signed-off-by: Jiri Kosina --- drivers/hid/hid-wacom.c | 40 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 39 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index f9d493931b02..97ef6260fda0 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -30,6 +30,7 @@ struct wacom_data { __u16 tool; unsigned char butstate; + unsigned char high_speed; #ifdef CONFIG_HID_WACOM_POWER_SUPPLY int battery_capacity; struct power_supply battery; @@ -105,6 +106,7 @@ static int wacom_ac_get_property(struct power_supply *psy, static void wacom_poke(struct hid_device *hdev, u8 speed) { + struct wacom_data *wdata = hid_get_drvdata(hdev); int limit, ret; char rep_data[2]; @@ -128,8 +130,10 @@ static void wacom_poke(struct hid_device *hdev, u8 speed) HID_FEATURE_REPORT); } while (ret < 0 && limit-- > 0); - if (ret >= 0) + if (ret >= 0) { + wdata->high_speed = speed; return; + } } /* @@ -141,6 +145,35 @@ static void wacom_poke(struct hid_device *hdev, u8 speed) return; } +static ssize_t wacom_show_speed(struct device *dev, + struct device_attribute + *attr, char *buf) +{ + struct wacom_data *wdata = dev_get_drvdata(dev); + + return snprintf(buf, PAGE_SIZE, "%i\n", wdata->high_speed); +} + +static ssize_t wacom_store_speed(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + int new_speed; + + if (sscanf(buf, "%1d", &new_speed ) != 1) + return -EINVAL; + + if (new_speed == 0 || new_speed == 1) { + wacom_poke(hdev, new_speed); + return strnlen(buf, PAGE_SIZE); + } else + return -EINVAL; +} + +static DEVICE_ATTR(speed, S_IRUGO | S_IWUGO, + wacom_show_speed, wacom_store_speed); + static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *raw_data, int size) { @@ -297,6 +330,11 @@ static int wacom_probe(struct hid_device *hdev, goto err_free; } + ret = device_create_file(&hdev->dev, &dev_attr_speed); + if (ret) + dev_warn(&hdev->dev, + "can't create sysfs speed attribute err: %d\n", ret); + /* Set Wacom mode 2 with high reporting speed */ wacom_poke(hdev, 1); -- cgit v1.2.2 From 14bf62cde79423a02a590e02664ed29a36facec1 Mon Sep 17 00:00:00 2001 From: Stefan Achatz Date: Thu, 18 Mar 2010 16:19:43 +0100 Subject: HID: add driver for Roccat Kone gaming mouse This Patch adds support for Kone gaming mouse from Roccat. It provides access to profiles, settings, firmware, weight, actual settings etc. through sysfs attributes. Event handling of this mouse differs from standard hid behaviour in that tilt button press is reported in each move event which results in strange behaviour if not handled by the driver. This is a heavily reworked version of the previously introduced driver. The changes include most of the previously raised concerns, memory leak and other fixes, code cleanups, adoption of additional achieved knowlege about the hardware and is (IMHO) a much better version than before even when I exchanged reduced USB-IO with a bigger memory consumption. I refused to implement one mentioned point: Removing the 'just-because-we-can' attributes. Motivation: Reading the clipped in weight: I'm no gamer and can't determine the usefulness of this feature but if the manufacturer implements such a feature it might make sense to someone and I would unwillingly limit the functionality besides its such a small feature. Reading the actual profile and dpi settings: Here I can testify that one can get lost of the actual settings when switching back and forth. The manufacturers windows driver has the ability for on-screen-display of the values and there is a mouse in the market that has an lcd on the underside of it to show these values. So I think this feature makes sense not only for me and shouldn't be removed. Signed-off-by: Stefan Achatz Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 7 + drivers/hid/Makefile | 1 + drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 3 + drivers/hid/hid-roccat-kone.c | 1006 +++++++++++++++++++++++++++++++++++++++++ drivers/hid/hid-roccat-kone.h | 214 +++++++++ 6 files changed, 1232 insertions(+) create mode 100644 drivers/hid/hid-roccat-kone.c create mode 100644 drivers/hid/hid-roccat-kone.h (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 71d4c0703629..d819b0271b41 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -268,6 +268,13 @@ config HID_QUANTA ---help--- Support for Quanta Optical Touch dual-touch panels. +config HID_ROCCAT_KONE + tristate "Roccat Kone" if EMBEDDED + depends on USB_HID + default !EMBEDDED + ---help--- + Support for Roccat Kone mouse. + config HID_SAMSUNG tristate "Samsung" if EMBEDDED depends on USB_HID diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index 0b2618f092ca..08b83ccd9d1b 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_HID_ORTEK) += hid-ortek.o obj-$(CONFIG_HID_QUANTA) += hid-quanta.o obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o +obj-$(CONFIG_HID_ROCCAT_KONE) += hid-roccat-kone.o obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o obj-$(CONFIG_HID_SONY) += hid-sony.o diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 2e2aa759d230..5c5a821cd4cb 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1346,6 +1346,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 797e06470356..014acfcde562 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -399,6 +399,9 @@ #define USB_VENDOR_ID_PRODIGE 0x05af #define USB_DEVICE_ID_PRODIGE_CORDLESS 0x3062 +#define USB_VENDOR_ID_ROCCAT 0x1e7d +#define USB_DEVICE_ID_ROCCAT_KONE 0x2ced + #define USB_VENDOR_ID_SAITEK 0x06a3 #define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17 diff --git a/drivers/hid/hid-roccat-kone.c b/drivers/hid/hid-roccat-kone.c new file mode 100644 index 000000000000..2b1412e4ff6f --- /dev/null +++ b/drivers/hid/hid-roccat-kone.c @@ -0,0 +1,1006 @@ +/* + * Roccat Kone driver for Linux + * + * Copyright (c) 2010 Stefan Achatz + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +/* + * Roccat Kone is a gamer mouse which consists of a mouse part and a keyboard + * part. The keyboard part enables the mouse to execute stored macros with mixed + * key- and button-events. + * + * TODO implement on-the-fly polling-rate change + * The windows driver has the ability to change the polling rate of the + * device on the press of a mousebutton. + * Is it possible to remove and reinstall the urb in raw-event- or any + * other handler, or to defer this action to be executed somewhere else? + * + * TODO implement notification mechanism for overlong macro execution + * If user wants to execute an overlong macro only the names of macroset + * and macro are given. Should userland tap hidraw or is there an + * additional streaming mechanism? + * + * TODO is it possible to overwrite group for sysfs attributes via udev? + */ + +#include +#include +#include +#include +#include +#include "hid-ids.h" +#include "hid-roccat-kone.h" + +static void kone_set_settings_checksum(struct kone_settings *settings) +{ + uint16_t checksum = 0; + unsigned char *address = (unsigned char *)settings; + int i; + + for (i = 0; i < sizeof(struct kone_settings) - 2; ++i, ++address) + checksum += *address; + settings->checksum = cpu_to_le16(checksum); +} + +/* + * Checks success after writing data to mouse + * On success returns 0 + * On failure returns errno + */ +static int kone_check_write(struct usb_device *usb_dev) +{ + int len; + unsigned char *data; + + data = kmalloc(1, GFP_KERNEL); + if (!data) + return -ENOMEM; + + do { + /* + * Mouse needs 50 msecs until it says ok, but there are + * 30 more msecs needed for next write to work. + */ + msleep(80); + + len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), + USB_REQ_CLEAR_FEATURE, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | + USB_DIR_IN, + kone_command_confirm_write, 0, data, 1, + USB_CTRL_SET_TIMEOUT); + + if (len != 1) { + kfree(data); + return -EIO; + } + + /* + * value of 3 seems to mean something like + * "not finished yet, but it looks good" + * So check again after a moment. + */ + } while (*data == 3); + + if (*data == 1) { /* everything alright */ + kfree(data); + return 0; + } else { /* unknown answer */ + dev_err(&usb_dev->dev, "got retval %d when checking write\n", + *data); + kfree(data); + return -EIO; + } +} + +/* + * Reads settings from mouse and stores it in @buf + * @buf has to be alloced with GFP_KERNEL + * On success returns 0 + * On failure returns errno + */ +static int kone_get_settings(struct usb_device *usb_dev, + struct kone_settings *buf) +{ + int len; + + len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), + USB_REQ_CLEAR_FEATURE, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, + kone_command_settings, 0, buf, + sizeof(struct kone_settings), USB_CTRL_SET_TIMEOUT); + + if (len != sizeof(struct kone_settings)) + return -EIO; + + return 0; +} + +/* + * Writes settings from @buf to mouse + * On success returns 0 + * On failure returns errno + */ +static int kone_set_settings(struct usb_device *usb_dev, + struct kone_settings const *settings) +{ + int len; + + len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), + USB_REQ_SET_CONFIGURATION, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT, + kone_command_settings, 0, (char *)settings, + sizeof(struct kone_settings), + USB_CTRL_SET_TIMEOUT); + + if (len != sizeof(struct kone_settings)) + return -EIO; + + if (kone_check_write(usb_dev)) + return -EIO; + + return 0; +} + +/* + * Reads profile data from mouse and stores it in @buf + * @number: profile number to read + * On success returns 0 + * On failure returns errno + */ +static int kone_get_profile(struct usb_device *usb_dev, + struct kone_profile *buf, int number) +{ + int len; + + if (number < 1 || number > 5) + return -EINVAL; + + len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), + USB_REQ_CLEAR_FEATURE, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, + kone_command_profile, number, buf, + sizeof(struct kone_profile), USB_CTRL_SET_TIMEOUT); + + if (len != sizeof(struct kone_profile)) + return -EIO; + + return 0; +} + +/* + * Writes profile data to mouse. + * @number: profile number to write + * On success returns 0 + * On failure returns errno + */ +static int kone_set_profile(struct usb_device *usb_dev, + struct kone_profile const *profile, int number) +{ + int len; + + if (number < 1 || number > 5) + return -EINVAL; + + len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), + USB_REQ_SET_CONFIGURATION, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT, + kone_command_profile, number, (char *)profile, + sizeof(struct kone_profile), + USB_CTRL_SET_TIMEOUT); + + if (len != sizeof(struct kone_profile)) + return len; + + if (kone_check_write(usb_dev)) + return -EIO; + + return 0; +} + +/* + * Reads value of "fast-clip-weight" and stores it in @result + * On success returns 0 + * On failure returns errno + */ +static int kone_get_weight(struct usb_device *usb_dev, int *result) +{ + int len; + uint8_t *data; + + data = kmalloc(1, GFP_KERNEL); + if (!data) + return -ENOMEM; + + len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), + USB_REQ_CLEAR_FEATURE, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, + kone_command_weight, 0, data, 1, USB_CTRL_SET_TIMEOUT); + + if (len != 1) { + kfree(data); + return -EIO; + } + *result = (int)*data; + kfree(data); + return 0; +} + +/* + * Reads firmware_version of mouse and stores it in @result + * On success returns 0 + * On failure returns errno + */ +static int kone_get_firmware_version(struct usb_device *usb_dev, int *result) +{ + int len; + unsigned char *data; + + data = kmalloc(2, GFP_KERNEL); + if (!data) + return -ENOMEM; + + len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), + USB_REQ_CLEAR_FEATURE, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, + kone_command_firmware_version, 0, data, 2, + USB_CTRL_SET_TIMEOUT); + + if (len != 2) { + kfree(data); + return -EIO; + } + *result = le16_to_cpu(*data); + kfree(data); + return 0; +} + +static ssize_t kone_sysfs_read_settings(struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t off, size_t count) { + struct device *dev = container_of(kobj, struct device, kobj); + struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev)); + + if (off >= sizeof(struct kone_settings)) + return 0; + + if (off + count > sizeof(struct kone_settings)) + count = sizeof(struct kone_settings) - off; + + mutex_lock(&kone->kone_lock); + memcpy(buf, &kone->settings + off, count); + mutex_unlock(&kone->kone_lock); + + return count; +} + +/* + * Writing settings automatically activates startup_profile. + * This function keeps values in kone_device up to date and assumes that in + * case of error the old data is still valid + */ +static ssize_t kone_sysfs_write_settings(struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t off, size_t count) { + struct device *dev = container_of(kobj, struct device, kobj); + struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev)); + struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev)); + int retval = 0, difference; + + /* I need to get my data in one piece */ + if (off != 0 || count != sizeof(struct kone_settings)) + return -EINVAL; + + mutex_lock(&kone->kone_lock); + difference = memcmp(buf, &kone->settings, sizeof(struct kone_settings)); + if (difference) { + retval = kone_set_settings(usb_dev, + (struct kone_settings const *)buf); + if (!retval) + memcpy(&kone->settings, buf, + sizeof(struct kone_settings)); + } + mutex_unlock(&kone->kone_lock); + + if (retval) + return retval; + + /* + * If we get here, treat settings as okay and update actual values + * according to startup_profile + */ + kone->actual_profile = kone->settings.startup_profile; + kone->actual_dpi = kone->profiles[kone->actual_profile - 1].startup_dpi; + + return sizeof(struct kone_settings); +} + +static ssize_t kone_sysfs_read_profilex(struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t off, size_t count, int number) { + struct device *dev = container_of(kobj, struct device, kobj); + struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev)); + + if (off >= sizeof(struct kone_profile)) + return 0; + + if (off + count > sizeof(struct kone_profile)) + count = sizeof(struct kone_profile) - off; + + mutex_lock(&kone->kone_lock); + memcpy(buf, &kone->profiles[number - 1], sizeof(struct kone_profile)); + mutex_unlock(&kone->kone_lock); + + return count; +} + +static ssize_t kone_sysfs_read_profile1(struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t off, size_t count) { + return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 1); +} + +static ssize_t kone_sysfs_read_profile2(struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t off, size_t count) { + return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 2); +} + +static ssize_t kone_sysfs_read_profile3(struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t off, size_t count) { + return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 3); +} + +static ssize_t kone_sysfs_read_profile4(struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t off, size_t count) { + return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 4); +} + +static ssize_t kone_sysfs_read_profile5(struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t off, size_t count) { + return kone_sysfs_read_profilex(kobj, attr, buf, off, count, 5); +} + +/* Writes data only if different to stored data */ +static ssize_t kone_sysfs_write_profilex(struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t off, size_t count, int number) { + struct device *dev = container_of(kobj, struct device, kobj); + struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev)); + struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev)); + struct kone_profile *profile; + int retval = 0, difference; + + /* I need to get my data in one piece */ + if (off != 0 || count != sizeof(struct kone_profile)) + return -EINVAL; + + profile = &kone->profiles[number - 1]; + + mutex_lock(&kone->kone_lock); + difference = memcmp(buf, profile, sizeof(struct kone_profile)); + if (difference) { + retval = kone_set_profile(usb_dev, + (struct kone_profile const *)buf, number); + if (!retval) + memcpy(profile, buf, sizeof(struct kone_profile)); + } + mutex_unlock(&kone->kone_lock); + + if (retval) + return retval; + + return sizeof(struct kone_profile); +} + +static ssize_t kone_sysfs_write_profile1(struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t off, size_t count) { + return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 1); +} + +static ssize_t kone_sysfs_write_profile2(struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t off, size_t count) { + return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 2); +} + +static ssize_t kone_sysfs_write_profile3(struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t off, size_t count) { + return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 3); +} + +static ssize_t kone_sysfs_write_profile4(struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t off, size_t count) { + return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 4); +} + +static ssize_t kone_sysfs_write_profile5(struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t off, size_t count) { + return kone_sysfs_write_profilex(kobj, attr, buf, off, count, 5); +} + +static ssize_t kone_sysfs_show_actual_profile(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev)); + return snprintf(buf, PAGE_SIZE, "%d\n", kone->actual_profile); +} + +static ssize_t kone_sysfs_show_actual_dpi(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev)); + return snprintf(buf, PAGE_SIZE, "%d\n", kone->actual_dpi); +} + +/* weight is read each time, since we don't get informed when it's changed */ +static ssize_t kone_sysfs_show_weight(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev)); + struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev)); + int weight = 0; + int retval; + + mutex_lock(&kone->kone_lock); + retval = kone_get_weight(usb_dev, &weight); + mutex_unlock(&kone->kone_lock); + + if (retval) + return retval; + return snprintf(buf, PAGE_SIZE, "%d\n", weight); +} + +static ssize_t kone_sysfs_show_firmware_version(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev)); + return snprintf(buf, PAGE_SIZE, "%d\n", kone->firmware_version); +} + +static ssize_t kone_sysfs_show_tcu(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev)); + return snprintf(buf, PAGE_SIZE, "%d\n", kone->settings.tcu); +} + +static int kone_tcu_command(struct usb_device *usb_dev, int number) +{ + int len; + char *value; + + value = kmalloc(1, GFP_KERNEL); + if (!value) + return -ENOMEM; + + *value = number; + + len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), + USB_REQ_SET_CONFIGURATION, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT, + kone_command_calibrate, 0, value, 1, + USB_CTRL_SET_TIMEOUT); + + kfree(value); + return ((len != 1) ? -EIO : 0); +} + +/* + * Calibrating the tcu is the only action that changes settings data inside the + * mouse, so this data needs to be reread + */ +static ssize_t kone_sysfs_set_tcu(struct device *dev, + struct device_attribute *attr, char const *buf, size_t size) +{ + struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev)); + struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev)); + int retval; + unsigned long state; + + retval = strict_strtoul(buf, 10, &state); + if (retval) + return retval; + + if (state != 0 && state != 1) + return -EINVAL; + + mutex_lock(&kone->kone_lock); + + if (state == 1) { /* state activate */ + retval = kone_tcu_command(usb_dev, 1); + if (retval) + goto exit_unlock; + retval = kone_tcu_command(usb_dev, 2); + if (retval) + goto exit_unlock; + ssleep(5); /* tcu needs this time for calibration */ + retval = kone_tcu_command(usb_dev, 3); + if (retval) + goto exit_unlock; + retval = kone_tcu_command(usb_dev, 0); + if (retval) + goto exit_unlock; + retval = kone_tcu_command(usb_dev, 4); + if (retval) + goto exit_unlock; + /* + * Kone needs this time to settle things. + * Reading settings too early will result in invalid data. + * Roccat's driver waits 1 sec, maybe this time could be + * shortened. + */ + ssleep(1); + } + + /* calibration changes values in settings, so reread */ + retval = kone_get_settings(usb_dev, &kone->settings); + if (retval) + goto exit_no_settings; + + /* only write settings back if activation state is different */ + if (kone->settings.tcu != state) { + kone->settings.tcu = state; + kone_set_settings_checksum(&kone->settings); + + retval = kone_set_settings(usb_dev, &kone->settings); + if (retval) { + dev_err(&usb_dev->dev, "couldn't set tcu state\n"); + /* + * try to reread valid settings into buffer overwriting + * first error code + */ + retval = kone_get_settings(usb_dev, &kone->settings); + if (retval) + goto exit_no_settings; + goto exit_unlock; + } + } + + retval = size; +exit_no_settings: + dev_err(&usb_dev->dev, "couldn't read settings\n"); +exit_unlock: + mutex_unlock(&kone->kone_lock); + return retval; +} + +static ssize_t kone_sysfs_show_startup_profile(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev)); + return snprintf(buf, PAGE_SIZE, "%d\n", kone->settings.startup_profile); +} + +static ssize_t kone_sysfs_set_startup_profile(struct device *dev, + struct device_attribute *attr, char const *buf, size_t size) +{ + struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev)); + struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev)); + int retval; + unsigned long new_startup_profile; + + retval = strict_strtoul(buf, 10, &new_startup_profile); + if (retval) + return retval; + + if (new_startup_profile < 1 || new_startup_profile > 5) + return -EINVAL; + + mutex_lock(&kone->kone_lock); + + kone->settings.startup_profile = new_startup_profile; + kone_set_settings_checksum(&kone->settings); + + retval = kone_set_settings(usb_dev, &kone->settings); + + mutex_unlock(&kone->kone_lock); + + if (retval) + return retval; + + /* changing the startup profile immediately activates this profile */ + kone->actual_profile = new_startup_profile; + kone->actual_dpi = kone->profiles[kone->actual_profile - 1].startup_dpi; + + return size; +} + +/* + * This file is used by userland software to find devices that are handled by + * this driver. This provides a consistent way for actual and older kernels + * where this driver replaced usbhid instead of generic-usb. + * Driver capabilities are determined by version number. + */ +static ssize_t kone_sysfs_show_driver_version(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, DRIVER_VERSION "\n"); +} + +/* + * Read actual dpi settings. + * Returns raw value for further processing. Refer to enum kone_polling_rates to + * get real value. + */ +static DEVICE_ATTR(actual_dpi, 0440, kone_sysfs_show_actual_dpi, NULL); + +static DEVICE_ATTR(actual_profile, 0440, kone_sysfs_show_actual_profile, NULL); + +/* + * The mouse can be equipped with one of four supplied weights from 5 to 20 + * grams which are recognized and its value can be read out. + * This returns the raw value reported by the mouse for easy evaluation by + * software. Refer to enum kone_weights to get corresponding real weight. + */ +static DEVICE_ATTR(weight, 0440, kone_sysfs_show_weight, NULL); + +/* + * Prints firmware version stored in mouse as integer. + * The raw value reported by the mouse is returned for easy evaluation, to get + * the real version number the decimal point has to be shifted 2 positions to + * the left. E.g. a value of 138 means 1.38. + */ +static DEVICE_ATTR(firmware_version, 0440, + kone_sysfs_show_firmware_version, NULL); + +/* + * Prints state of Tracking Control Unit as number where 0 = off and 1 = on + * Writing 0 deactivates tcu and writing 1 calibrates and activates the tcu + */ +static DEVICE_ATTR(tcu, 0660, kone_sysfs_show_tcu, kone_sysfs_set_tcu); + +/* Prints and takes the number of the profile the mouse starts with */ +static DEVICE_ATTR(startup_profile, 0660, + kone_sysfs_show_startup_profile, + kone_sysfs_set_startup_profile); + +static DEVICE_ATTR(kone_driver_version, 0440, + kone_sysfs_show_driver_version, NULL); + +static struct attribute *kone_attributes[] = { + &dev_attr_actual_dpi.attr, + &dev_attr_actual_profile.attr, + &dev_attr_weight.attr, + &dev_attr_firmware_version.attr, + &dev_attr_tcu.attr, + &dev_attr_startup_profile.attr, + &dev_attr_kone_driver_version.attr, + NULL +}; + +static struct attribute_group kone_attribute_group = { + .attrs = kone_attributes +}; + +static struct bin_attribute kone_settings_attr = { + .attr = { .name = "settings", .mode = 0660 }, + .size = sizeof(struct kone_settings), + .read = kone_sysfs_read_settings, + .write = kone_sysfs_write_settings +}; + +static struct bin_attribute kone_profile1_attr = { + .attr = { .name = "profile1", .mode = 0660 }, + .size = sizeof(struct kone_profile), + .read = kone_sysfs_read_profile1, + .write = kone_sysfs_write_profile1 +}; + +static struct bin_attribute kone_profile2_attr = { + .attr = { .name = "profile2", .mode = 0660 }, + .size = sizeof(struct kone_profile), + .read = kone_sysfs_read_profile2, + .write = kone_sysfs_write_profile2 +}; + +static struct bin_attribute kone_profile3_attr = { + .attr = { .name = "profile3", .mode = 0660 }, + .size = sizeof(struct kone_profile), + .read = kone_sysfs_read_profile3, + .write = kone_sysfs_write_profile3 +}; + +static struct bin_attribute kone_profile4_attr = { + .attr = { .name = "profile4", .mode = 0660 }, + .size = sizeof(struct kone_profile), + .read = kone_sysfs_read_profile4, + .write = kone_sysfs_write_profile4 +}; + +static struct bin_attribute kone_profile5_attr = { + .attr = { .name = "profile5", .mode = 0660 }, + .size = sizeof(struct kone_profile), + .read = kone_sysfs_read_profile5, + .write = kone_sysfs_write_profile5 +}; + +static int kone_create_sysfs_attributes(struct usb_interface *intf) +{ + int retval; + + retval = sysfs_create_group(&intf->dev.kobj, &kone_attribute_group); + if (retval) + goto exit_1; + + retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_settings_attr); + if (retval) + goto exit_2; + + retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile1_attr); + if (retval) + goto exit_3; + + retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile2_attr); + if (retval) + goto exit_4; + + retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile3_attr); + if (retval) + goto exit_5; + + retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile4_attr); + if (retval) + goto exit_6; + + retval = sysfs_create_bin_file(&intf->dev.kobj, &kone_profile5_attr); + if (retval) + goto exit_7; + + return 0; + +exit_7: + sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile4_attr); +exit_6: + sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile3_attr); +exit_5: + sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile2_attr); +exit_4: + sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile1_attr); +exit_3: + sysfs_remove_bin_file(&intf->dev.kobj, &kone_settings_attr); +exit_2: + sysfs_remove_group(&intf->dev.kobj, &kone_attribute_group); +exit_1: + return retval; +} + +static void kone_remove_sysfs_attributes(struct usb_interface *intf) +{ + sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile5_attr); + sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile4_attr); + sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile3_attr); + sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile2_attr); + sysfs_remove_bin_file(&intf->dev.kobj, &kone_profile1_attr); + sysfs_remove_bin_file(&intf->dev.kobj, &kone_settings_attr); + sysfs_remove_group(&intf->dev.kobj, &kone_attribute_group); +} + +static int kone_init_kone_device_struct(struct usb_device *usb_dev, + struct kone_device *kone) +{ + uint i; + int retval; + + mutex_init(&kone->kone_lock); + + for (i = 0; i < 5; ++i) { + retval = kone_get_profile(usb_dev, &kone->profiles[i], i + 1); + if (retval) + return retval; + } + + retval = kone_get_settings(usb_dev, &kone->settings); + if (retval) + return retval; + + retval = kone_get_firmware_version(usb_dev, &kone->firmware_version); + if (retval) + return retval; + + kone->actual_profile = kone->settings.startup_profile; + kone->actual_dpi = kone->profiles[kone->actual_profile].startup_dpi; + + return 0; +} + +/* + * Since IGNORE_MOUSE quirk moved to hid-apple, there is no way to bind only to + * mousepart if usb_hid is compiled into the kernel and kone is compiled as + * module. + * Secial behaviour is bound only to mousepart since only mouseevents contain + * additional notifications. + */ +static int kone_init_specials(struct hid_device *hdev) +{ + struct usb_interface *intf = to_usb_interface(hdev->dev.parent); + struct usb_device *usb_dev = interface_to_usbdev(intf); + struct kone_device *kone; + int retval; + + if (intf->cur_altsetting->desc.bInterfaceProtocol + == USB_INTERFACE_PROTOCOL_MOUSE) { + + kone = kzalloc(sizeof(*kone), GFP_KERNEL); + if (!kone) { + dev_err(&hdev->dev, "can't alloc device descriptor\n"); + return -ENOMEM; + } + hid_set_drvdata(hdev, kone); + + retval = kone_init_kone_device_struct(usb_dev, kone); + if (retval) { + dev_err(&hdev->dev, + "couldn't init struct kone_device\n"); + goto exit_free; + } + retval = kone_create_sysfs_attributes(intf); + if (retval) { + dev_err(&hdev->dev, "cannot create sysfs files\n"); + goto exit_free; + } + } else { + hid_set_drvdata(hdev, NULL); + } + + return 0; +exit_free: + kfree(kone); + return retval; +} + + +static void kone_remove_specials(struct hid_device *hdev) +{ + struct usb_interface *intf = to_usb_interface(hdev->dev.parent); + + if (intf->cur_altsetting->desc.bInterfaceProtocol + == USB_INTERFACE_PROTOCOL_MOUSE) { + kone_remove_sysfs_attributes(intf); + kfree(hid_get_drvdata(hdev)); + } +} + +static int kone_probe(struct hid_device *hdev, const struct hid_device_id *id) +{ + int retval; + + retval = hid_parse(hdev); + if (retval) { + dev_err(&hdev->dev, "parse failed\n"); + goto exit; + } + + retval = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + if (retval) { + dev_err(&hdev->dev, "hw start failed\n"); + goto exit; + } + + retval = kone_init_specials(hdev); + if (retval) { + dev_err(&hdev->dev, "couldn't install mouse\n"); + goto exit_stop; + } + + return 0; + +exit_stop: + hid_hw_stop(hdev); +exit: + return retval; +} + +static void kone_remove(struct hid_device *hdev) +{ + kone_remove_specials(hdev); + hid_hw_stop(hdev); +} + +/* + * Is called for keyboard- and mousepart. + * Only mousepart gets informations about special events in its extended event + * structure. + */ +static int kone_raw_event(struct hid_device *hdev, struct hid_report *report, + u8 *data, int size) +{ + struct kone_device *kone = hid_get_drvdata(hdev); + struct kone_mouse_event *event = (struct kone_mouse_event *)data; + + /* keyboard events are always processed by default handler */ + if (size != sizeof(struct kone_mouse_event)) + return 0; + + /* + * Firmware 1.38 introduced new behaviour for tilt buttons. + * Pressed tilt button is reported in each movement event. + * Workaround sends only one event per press. + */ + if (kone->last_tilt_state == event->tilt) + event->tilt = 0; + else + kone->last_tilt_state = event->tilt; + + /* + * handle special events and keep actual profile and dpi values + * up to date + */ + switch (event->event) { + case kone_mouse_event_osd_dpi: + dev_dbg(&hdev->dev, "osd dpi event. actual dpi %d\n", + event->value); + return 1; /* return 1 if event was handled */ + case kone_mouse_event_switch_dpi: + kone->actual_dpi = event->value; + dev_dbg(&hdev->dev, "switched dpi to %d\n", event->value); + return 1; + case kone_mouse_event_osd_profile: + dev_dbg(&hdev->dev, "osd profile event. actual profile %d\n", + event->value); + return 1; + case kone_mouse_event_switch_profile: + kone->actual_profile = event->value; + kone->actual_dpi = kone->profiles[kone->actual_profile - 1]. + startup_dpi; + dev_dbg(&hdev->dev, "switched profile to %d\n", event->value); + return 1; + case kone_mouse_event_call_overlong_macro: + dev_dbg(&hdev->dev, "overlong macro called, button %d %s/%s\n", + event->macro_key, + kone->profiles[kone->actual_profile - 1]. + button_infos[event->macro_key].macro_set_name, + kone->profiles[kone->actual_profile - 1]. + button_infos[event->macro_key].macro_name + ); + return 1; + } + + return 0; /* do further processing */ +} + +static const struct hid_device_id kone_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONE) }, + { } +}; + +MODULE_DEVICE_TABLE(hid, kone_devices); + +static struct hid_driver kone_driver = { + .name = "kone", + .id_table = kone_devices, + .probe = kone_probe, + .remove = kone_remove, + .raw_event = kone_raw_event +}; + +static int kone_init(void) +{ + return hid_register_driver(&kone_driver); +} + +static void kone_exit(void) +{ + hid_unregister_driver(&kone_driver); +} + +module_init(kone_init); +module_exit(kone_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE(DRIVER_LICENSE); diff --git a/drivers/hid/hid-roccat-kone.h b/drivers/hid/hid-roccat-kone.h new file mode 100644 index 000000000000..ee6898c9d92c --- /dev/null +++ b/drivers/hid/hid-roccat-kone.h @@ -0,0 +1,214 @@ +#ifndef __HID_ROCCAT_KONE_H +#define __HID_ROCCAT_KONE_H + +/* + * Copyright (c) 2010 Stefan Achatz + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include + +#define DRIVER_VERSION "v0.3.0" +#define DRIVER_AUTHOR "Stefan Achatz" +#define DRIVER_DESC "USB Roccat Kone driver" +#define DRIVER_LICENSE "GPL v2" + +#pragma pack(push) +#pragma pack(1) + +struct kone_keystroke { + uint8_t key; + uint8_t action; + uint16_t period; /* in milliseconds */ +}; + +enum kone_keystroke_buttons { + kone_keystroke_button_1 = 0xf0, /* left mouse button */ + kone_keystroke_button_2 = 0xf1, /* right mouse button */ + kone_keystroke_button_3 = 0xf2, /* wheel */ + kone_keystroke_button_9 = 0xf3, /* side button up */ + kone_keystroke_button_8 = 0xf4 /* side button down */ +}; + +enum kone_keystroke_actions { + kone_keystroke_action_press = 0, + kone_keystroke_action_release = 1 +}; + +struct kone_button_info { + uint8_t number; /* range 1-8 */ + uint8_t type; + uint8_t macro_type; /* 0 = short, 1 = overlong */ + uint8_t macro_set_name[16]; /* can be max 15 chars long */ + uint8_t macro_name[16]; /* can be max 15 chars long */ + uint8_t count; + struct kone_keystroke keystrokes[20]; +}; + +enum kone_button_info_types { + /* valid button types until firmware 1.32 */ + kone_button_info_type_button_1 = 0x1, /* click (left mouse button) */ + kone_button_info_type_button_2 = 0x2, /* menu (right mouse button)*/ + kone_button_info_type_button_3 = 0x3, /* scroll (wheel) */ + kone_button_info_type_double_click = 0x4, + kone_button_info_type_key = 0x5, + kone_button_info_type_macro = 0x6, + kone_button_info_type_off = 0x7, + /* TODO clarify function and rename */ + kone_button_info_type_osd_xy_prescaling = 0x8, + kone_button_info_type_osd_dpi = 0x9, + kone_button_info_type_osd_profile = 0xa, + kone_button_info_type_button_9 = 0xb, /* ie forward */ + kone_button_info_type_button_8 = 0xc, /* ie backward */ + kone_button_info_type_dpi_up = 0xd, /* internal */ + kone_button_info_type_dpi_down = 0xe, /* internal */ + kone_button_info_type_button_7 = 0xf, /* tilt left */ + kone_button_info_type_button_6 = 0x10, /* tilt right */ + kone_button_info_type_profile_up = 0x11, /* internal */ + kone_button_info_type_profile_down = 0x12, /* internal */ + /* additional valid button types since firmware 1.38 */ + kone_button_info_type_multimedia_open_player = 0x20, + kone_button_info_type_multimedia_next_track = 0x21, + kone_button_info_type_multimedia_prev_track = 0x22, + kone_button_info_type_multimedia_play_pause = 0x23, + kone_button_info_type_multimedia_stop = 0x24, + kone_button_info_type_multimedia_mute = 0x25, + kone_button_info_type_multimedia_volume_up = 0x26, + kone_button_info_type_multimedia_volume_down = 0x27 +}; + +struct kone_light_info { + uint8_t number; /* number of light 1-5 */ + uint8_t mod; /* 1 = on, 2 = off */ + uint8_t red; /* range 0x00-0xff */ + uint8_t green; /* range 0x00-0xff */ + uint8_t blue; /* range 0x00-0xff */ +}; + +struct kone_profile { + uint16_t size; /* always 975 */ + uint16_t unused; /* always 0 */ + + /* + * range 1-5 + * This number does not need to correspond with location where profile + * saved + */ + uint8_t profile; /* range 1-5 */ + + uint16_t main_sensitivity; /* range 100-1000 */ + uint8_t xy_sensitivity_enabled; /* 1 = on, 2 = off */ + uint16_t x_sensitivity; /* range 100-1000 */ + uint16_t y_sensitivity; /* range 100-1000 */ + uint8_t dpi_rate; /* bit 1 = 800, ... */ + uint8_t startup_dpi; /* range 1-6 */ + uint8_t polling_rate; /* 1 = 125Hz, 2 = 500Hz, 3 = 1000Hz */ + /* kone has no dcu + * value is always 2 in firmwares <= 1.32 and + * 1 in firmwares > 1.32 + */ + uint8_t dcu_flag; + uint8_t light_effect_1; /* range 1-3 */ + uint8_t light_effect_2; /* range 1-5 */ + uint8_t light_effect_3; /* range 1-4 */ + uint8_t light_effect_speed; /* range 0-255 */ + + struct kone_light_info light_infos[5]; + struct kone_button_info button_infos[8]; + + uint16_t checksum; /* \brief holds checksum of struct */ +}; + +enum kone_polling_rates { + kone_polling_rate_125 = 1, + kone_polling_rate_500 = 2, + kone_polling_rate_1000 = 3 +}; + +struct kone_settings { + uint16_t size; /* always 36 */ + uint8_t startup_profile; /* 1-5 */ + uint8_t unknown1; + uint8_t tcu; /* 0 = off, 1 = on */ + uint8_t unknown2[23]; + uint8_t calibration_data[4]; + uint8_t unknown3[2]; + uint16_t checksum; +}; + +/* + * 12 byte mouse event read by interrupt_read + */ +struct kone_mouse_event { + uint8_t report_number; /* always 1 */ + uint8_t button; + uint16_t x; + uint16_t y; + uint8_t wheel; /* up = 1, down = -1 */ + uint8_t tilt; /* right = 1, left = -1 */ + uint8_t unknown; + uint8_t event; + uint8_t value; /* press = 0, release = 1 */ + uint8_t macro_key; /* 0 to 8 */ +}; + +enum kone_mouse_events { + /* osd events are thought to be display on screen */ + kone_mouse_event_osd_dpi = 0xa0, + kone_mouse_event_osd_profile = 0xb0, + /* TODO clarify meaning and occurence of kone_mouse_event_calibration */ + kone_mouse_event_calibration = 0xc0, + kone_mouse_event_call_overlong_macro = 0xe0, + /* switch events notify if user changed values wiht mousebutton click */ + kone_mouse_event_switch_dpi = 0xf0, + kone_mouse_event_switch_profile = 0xf1 +}; + +enum kone_commands { + kone_command_profile = 0x5a, + kone_command_settings = 0x15a, + kone_command_firmware_version = 0x25a, + kone_command_weight = 0x45a, + kone_command_calibrate = 0x55a, + kone_command_confirm_write = 0x65a, + kone_command_firmware = 0xe5a +}; + +#pragma pack(pop) + +struct kone_device { + /* + * Storing actual values when we get informed about changes since there + * is no way of getting this information from the device on demand + */ + int actual_profile, actual_dpi; + /* Used for neutralizing abnormal tilt button behaviour */ + int last_tilt_state; + /* + * It's unlikely that multiple sysfs attributes are accessed at a time, + * so only one mutex is used to secure hardware access and profiles and + * settings of this struct. + */ + struct mutex kone_lock; + + /* + * Storing the data here reduces IO and ensures that data is available + * when its needed (E.g. interrupt handler). + */ + struct kone_profile profiles[5]; + struct kone_settings settings; + + /* + * firmware doesn't change unless firmware update is implemented, + * so it's read only once + */ + int firmware_version; +}; + +#endif -- cgit v1.2.2 From 23d386d85a9144612c4a13733aa1ca6e5a21f4a2 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Mon, 22 Mar 2010 16:33:15 +0100 Subject: HID: fixup Kconfig entry for Roccat Kone Make it independent on CONFIG_EMBEDDED (to be in sync with other "full-fledged" HID drivers which are not simple quirks) and provide a little bit better text description. Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index d819b0271b41..44b4691fd196 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -269,9 +269,8 @@ config HID_QUANTA Support for Quanta Optical Touch dual-touch panels. config HID_ROCCAT_KONE - tristate "Roccat Kone" if EMBEDDED + tristate "Roccat Kone Mouse support" depends on USB_HID - default !EMBEDDED ---help--- Support for Roccat Kone mouse. -- cgit v1.2.2 From 2e57480b2a717916510b0c23b2851398a4cbd958 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 25 Mar 2010 14:15:11 +0100 Subject: HID: remove BKL from hidraw Remove BKL from hidraw, which is possible through fixing the locking of minors_lock mutex properly -- it is now used to guard all accessess to hidraw_table[], preventing it to becoming NULL unexpectedly by unregistering the device. Signed-off-by: Jiri Kosina --- drivers/hid/hidraw.c | 41 +++++++++++++++++++++++++---------------- 1 file changed, 25 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index d04476700b7b..589dac5b5f56 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -105,38 +105,48 @@ out: static ssize_t hidraw_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos) { unsigned int minor = iminor(file->f_path.dentry->d_inode); - /* FIXME: What stops hidraw_table going NULL */ - struct hid_device *dev = hidraw_table[minor]->hid; + struct hid_device *dev; __u8 *buf; int ret = 0; - if (!dev->hid_output_raw_report) - return -ENODEV; + mutex_lock(&minors_lock); + dev = hidraw_table[minor]->hid; + + if (!dev->hid_output_raw_report) { + ret = -ENODEV; + goto out; + } if (count > HID_MAX_BUFFER_SIZE) { printk(KERN_WARNING "hidraw: pid %d passed too large report\n", task_pid_nr(current)); - return -EINVAL; + ret = -EINVAL; + goto out; } if (count < 2) { printk(KERN_WARNING "hidraw: pid %d passed too short report\n", task_pid_nr(current)); - return -EINVAL; + ret = -EINVAL; + goto out; } buf = kmalloc(count * sizeof(__u8), GFP_KERNEL); - if (!buf) - return -ENOMEM; + if (!buf) { + ret = -ENOMEM; + goto out; + } if (copy_from_user(buf, buffer, count)) { ret = -EFAULT; - goto out; + goto out_free; } ret = dev->hid_output_raw_report(dev, buf, count, HID_OUTPUT_REPORT); -out: +out_free: kfree(buf); +out: + mutex_unlock(&minors_lock); return ret; } @@ -164,7 +174,6 @@ static int hidraw_open(struct inode *inode, struct file *file) goto out; } - lock_kernel(); mutex_lock(&minors_lock); if (!hidraw_table[minor]) { printk(KERN_EMERG "hidraw device with minor %d doesn't exist\n", @@ -196,7 +205,6 @@ static int hidraw_open(struct inode *inode, struct file *file) out_unlock: mutex_unlock(&minors_lock); - unlock_kernel(); out: return err; @@ -237,11 +245,12 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, struct inode *inode = file->f_path.dentry->d_inode; unsigned int minor = iminor(inode); long ret = 0; - /* FIXME: What stops hidraw_table going NULL */ - struct hidraw *dev = hidraw_table[minor]; + struct hidraw *dev; void __user *user_arg = (void __user*) arg; - lock_kernel(); + mutex_lock(&minors_lock); + dev = hidraw_table[minor]; + switch (cmd) { case HIDIOCGRDESCSIZE: if (put_user(dev->hid->rsize, (int __user *)arg)) @@ -314,7 +323,7 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, ret = -ENOTTY; } - unlock_kernel(); + mutex_unlock(&minors_lock); return ret; } -- cgit v1.2.2 From 0a504541b3ba593535d70f3124546e5e471a175e Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 25 Mar 2010 15:20:01 +0100 Subject: HID: remove excessive _EMERG messages from hidraw We don't need to shout loudly when device gets disconnected while hidraw node has been open, as this is properly handled in disconnect() and protected by minors_lock already. Signed-off-by: Jiri Kosina --- drivers/hid/hidraw.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index 589dac5b5f56..7919d3e843b6 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -176,8 +176,6 @@ static int hidraw_open(struct inode *inode, struct file *file) mutex_lock(&minors_lock); if (!hidraw_table[minor]) { - printk(KERN_EMERG "hidraw device with minor %d doesn't exist\n", - minor); kfree(list); err = -ENODEV; goto out_unlock; @@ -216,11 +214,8 @@ static int hidraw_release(struct inode * inode, struct file * file) struct hidraw *dev; struct hidraw_list *list = file->private_data; - if (!hidraw_table[minor]) { - printk(KERN_EMERG "hidraw device with minor %d doesn't exist\n", - minor); + if (!hidraw_table[minor]) return -ENODEV; - } list_del(&list->node); dev = hidraw_table[minor]; -- cgit v1.2.2 From ed28f04b2753ce1b07b9c3dab7d186c43ce19e8c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 30 Mar 2010 02:52:41 +0900 Subject: HID: update gfp/slab.h includes Implicit slab.h inclusion via percpu.h is about to go away. Make sure gfp.h or slab.h is included as necessary. Signed-off-by: Tejun Heo Cc: Stephen Rothwell Cc: Jiri Kosina Signed-off-by: Jiri Kosina --- drivers/hid/hid-roccat-kone.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hid/hid-roccat-kone.c b/drivers/hid/hid-roccat-kone.c index 2b1412e4ff6f..7b1178496621 100644 --- a/drivers/hid/hid-roccat-kone.c +++ b/drivers/hid/hid-roccat-kone.c @@ -35,6 +35,7 @@ #include #include #include +#include #include "hid-ids.h" #include "hid-roccat-kone.h" -- cgit v1.2.2 From da54a0ced4502dc2a25df034f218463a2a50488d Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 25 Mar 2010 15:34:34 +0100 Subject: HID: update BKL comment in hiddev Update comment explaining BKL usage in legacy hiddev driver. Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hiddev.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index 433602aed468..c24d2fa3e3b6 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -267,6 +267,7 @@ static int hiddev_open(struct inode *inode, struct file *file) struct hiddev_list *list; int res, i; + /* See comment in hiddev_connect() for BKL explanation */ lock_kernel(); i = iminor(inode) - HIDDEV_MINOR_BASE; @@ -894,8 +895,22 @@ int hiddev_connect(struct hid_device *hid, unsigned int force) hiddev->hid = hid; hiddev->exist = 1; - /* when lock_kernel() usage is fixed in usb_open(), - * we could also fix it here */ + /* + * BKL here is used to avoid race after usb_register_dev(). + * Once the device node has been created, open() could happen on it. + * The code below will then fail, as hiddev_table hasn't been + * updated. + * + * The obvious fix -- introducing mutex to guard hiddev_table[] + * doesn't work, as usb_open() and usb_register_dev() both take + * minor_rwsem, thus we'll have ABBA deadlock. + * + * Before BKL pushdown, usb_open() had been acquiring it in right + * order, so _open() was safe to use it to protect from this race. + * Now the order is different, but AB-BA deadlock still doesn't occur + * as BKL is dropped on schedule() (i.e. while sleeping on + * minor_rwsem). Fugly. + */ lock_kernel(); retval = usb_register_dev(usbhid->intf, &hiddev_class); if (retval) { -- cgit v1.2.2 From 236db47c2b3b69464d50c695ab2ddd516cf64520 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Tue, 30 Mar 2010 22:33:50 +0200 Subject: HID: new driver for PicoLCD device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add basic driver for PicoLCD graphics device. Initially support keypad with input device and provide support for debugging communication via events file from debugfs. Signed-off-by: Bruno Prémont Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 18 + drivers/hid/Makefile | 1 + drivers/hid/hid-core.c | 2 + drivers/hid/hid-ids.h | 2 + drivers/hid/hid-picolcd.c | 1183 +++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 1206 insertions(+) create mode 100644 drivers/hid/hid-picolcd.c (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 71d4c0703629..138ba6a277ee 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -262,6 +262,24 @@ config HID_PETALYNX ---help--- Support for Petalynx Maxter remote control. +config HID_PICOLCD + tristate "PicoLCD (graphic version)" + depends on USB_HID + ---help--- + This provides support for Minibox PicoLCD devices, currently + only the graphical ones are supported. + + This includes support for the following device features: + - Keypad + - Switching between Firmware and Flash mode + Features that are not (yet) supported: + - Framebuffer for monochrome 256x64 display + - Backlight control + - Contrast control + - IR + - General purpose outputs + - EEProm / Flash access + config HID_QUANTA tristate "Quanta Optical Touch" depends on USB_HID diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index 0b2618f092ca..7fd1614e7e2c 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_HID_ORTEK) += hid-ortek.o obj-$(CONFIG_HID_QUANTA) += hid-quanta.o obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o +obj-$(CONFIG_HID_PICOLCD) += hid-picolcd.o obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o obj-$(CONFIG_HID_SONY) += hid-sony.o diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 2e2aa759d230..bb11fb460d55 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1335,6 +1335,8 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR) }, + { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) }, + { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_LK6K) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 797e06470356..783b41d8592e 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -341,6 +341,8 @@ #define USB_VENDOR_ID_MICROCHIP 0x04d8 #define USB_DEVICE_ID_PICKIT1 0x0032 #define USB_DEVICE_ID_PICKIT2 0x0033 +#define USB_DEVICE_ID_PICOLCD 0xc002 +#define USB_DEVICE_ID_PICOLCD_BOOTLOADER 0xf002 #define USB_VENDOR_ID_MICROSOFT 0x045e #define USB_DEVICE_ID_SIDEWINDER_GV 0x003b diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c new file mode 100644 index 000000000000..c7855f388898 --- /dev/null +++ b/drivers/hid/hid-picolcd.c @@ -0,0 +1,1183 @@ +/*************************************************************************** + * Copyright (C) 2010 by Bruno Prémont * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see . * + ***************************************************************************/ + +#include +#include +#include +#include "hid-ids.h" +#include "usbhid/usbhid.h" +#include + +#include +#include + +#include + +#define PICOLCD_NAME "PicoLCD (graphic)" + +/* Report numbers */ +#define REPORT_ERROR_CODE 0x10 /* LCD: IN[16] */ +#define ERR_SUCCESS 0x00 +#define ERR_PARAMETER_MISSING 0x01 +#define ERR_DATA_MISSING 0x02 +#define ERR_BLOCK_READ_ONLY 0x03 +#define ERR_BLOCK_NOT_ERASABLE 0x04 +#define ERR_BLOCK_TOO_BIG 0x05 +#define ERR_SECTION_OVERFLOW 0x06 +#define ERR_INVALID_CMD_LEN 0x07 +#define ERR_INVALID_DATA_LEN 0x08 +#define REPORT_KEY_STATE 0x11 /* LCD: IN[2] */ +#define REPORT_IR_DATA 0x21 /* LCD: IN[63] */ +#define REPORT_EE_DATA 0x32 /* LCD: IN[63] */ +#define REPORT_MEMORY 0x41 /* LCD: IN[63] */ +#define REPORT_LED_STATE 0x81 /* LCD: OUT[1] */ +#define REPORT_BRIGHTNESS 0x91 /* LCD: OUT[1] */ +#define REPORT_CONTRAST 0x92 /* LCD: OUT[1] */ +#define REPORT_RESET 0x93 /* LCD: OUT[2] */ +#define REPORT_LCD_CMD 0x94 /* LCD: OUT[63] */ +#define REPORT_LCD_DATA 0x95 /* LCD: OUT[63] */ +#define REPORT_LCD_CMD_DATA 0x96 /* LCD: OUT[63] */ +#define REPORT_EE_READ 0xa3 /* LCD: OUT[63] */ +#define REPORT_EE_WRITE 0xa4 /* LCD: OUT[63] */ +#define REPORT_ERASE_MEMORY 0xb2 /* LCD: OUT[2] */ +#define REPORT_READ_MEMORY 0xb3 /* LCD: OUT[3] */ +#define REPORT_WRITE_MEMORY 0xb4 /* LCD: OUT[63] */ +#define REPORT_SPLASH_RESTART 0xc1 /* LCD: OUT[1] */ +#define REPORT_EXIT_KEYBOARD 0xef /* LCD: OUT[2] */ +#define REPORT_VERSION 0xf1 /* LCD: IN[2],OUT[1] Bootloader: IN[2],OUT[1] */ +#define REPORT_BL_ERASE_MEMORY 0xf2 /* Bootloader: IN[36],OUT[4] */ +#define REPORT_BL_READ_MEMORY 0xf3 /* Bootloader: IN[36],OUT[4] */ +#define REPORT_BL_WRITE_MEMORY 0xf4 /* Bootloader: IN[36],OUT[36] */ +#define REPORT_DEVID 0xf5 /* LCD: IN[5], OUT[1] Bootloader: IN[5],OUT[1] */ +#define REPORT_SPLASH_SIZE 0xf6 /* LCD: IN[4], OUT[1] */ +#define REPORT_HOOK_VERSION 0xf7 /* LCD: IN[2], OUT[1] */ +#define REPORT_EXIT_FLASHER 0xff /* Bootloader: OUT[2] */ + +/* Input device + * + * The PicoLCD has an IR receiver header, a built-in keypad with 5 keys + * and header for 4x4 key matrix. The built-in keys are part of the matrix. + */ +static const unsigned short def_keymap[] = { + KEY_RESERVED, /* none */ + KEY_BACK, /* col 4 + row 1 */ + KEY_HOMEPAGE, /* col 3 + row 1 */ + KEY_RESERVED, /* col 2 + row 1 */ + KEY_RESERVED, /* col 1 + row 1 */ + KEY_SCROLLUP, /* col 4 + row 2 */ + KEY_OK, /* col 3 + row 2 */ + KEY_SCROLLDOWN, /* col 2 + row 2 */ + KEY_RESERVED, /* col 1 + row 2 */ + KEY_RESERVED, /* col 4 + row 3 */ + KEY_RESERVED, /* col 3 + row 3 */ + KEY_RESERVED, /* col 2 + row 3 */ + KEY_RESERVED, /* col 1 + row 3 */ + KEY_RESERVED, /* col 4 + row 4 */ + KEY_RESERVED, /* col 3 + row 4 */ + KEY_RESERVED, /* col 2 + row 4 */ + KEY_RESERVED, /* col 1 + row 4 */ +}; +#define PICOLCD_KEYS ARRAY_SIZE(def_keymap) + +/* Description of in-progress IO operation, used for operations + * that trigger response from device */ +struct picolcd_pending { + struct hid_report *out_report; + struct hid_report *in_report; + struct completion ready; + int raw_size; + u8 raw_data[64]; +}; + +/* Per device data structure */ +struct picolcd_data { + struct hid_device *hdev; +#ifdef CONFIG_DEBUG_FS + int addr_sz; +#endif + u8 version[2]; + /* input stuff */ + u8 pressed_keys[2]; + struct input_dev *input_keys; + struct input_dev *input_cir; + unsigned short keycode[PICOLCD_KEYS]; + + /* Housekeeping stuff */ + spinlock_t lock; + struct mutex mutex; + struct picolcd_pending *pending; + int status; +#define PICOLCD_BOOTLOADER 1 +#define PICOLCD_FAILED 2 +}; + + +/* Find a given report */ +#define picolcd_in_report(id, dev) picolcd_report(id, dev, HID_INPUT_REPORT) +#define picolcd_out_report(id, dev) picolcd_report(id, dev, HID_OUTPUT_REPORT) + +static struct hid_report *picolcd_report(int id, struct hid_device *hdev, int dir) +{ + struct list_head *feature_report_list = &hdev->report_enum[dir].report_list; + struct hid_report *report = NULL; + + list_for_each_entry(report, feature_report_list, list) { + if (report->id == id) + return report; + } + dev_warn(&hdev->dev, "No report with id 0x%x found\n", id); + return NULL; +} + +#ifdef CONFIG_DEBUG_FS +static void picolcd_debug_out_report(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report); +#define usbhid_submit_report(a, b, c) \ + do { \ + picolcd_debug_out_report(hid_get_drvdata(a), a, b); \ + usbhid_submit_report(a, b, c); \ + } while (0) +#endif + +/* Submit a report and wait for a reply from device - if device fades away + * or does not respond in time, return NULL */ +static struct picolcd_pending *picolcd_send_and_wait(struct hid_device *hdev, + int report_id, const u8 *raw_data, int size) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + struct picolcd_pending *work; + struct hid_report *report = picolcd_out_report(report_id, hdev); + unsigned long flags; + int i, j, k; + + if (!report || !data) + return NULL; + if (data->status & PICOLCD_FAILED) + return NULL; + work = kzalloc(sizeof(*work), GFP_KERNEL); + if (!work) + return NULL; + + init_completion(&work->ready); + work->out_report = report; + work->in_report = NULL; + work->raw_size = 0; + + mutex_lock(&data->mutex); + spin_lock_irqsave(&data->lock, flags); + for (i = k = 0; i < report->maxfield; i++) + for (j = 0; j < report->field[i]->report_count; j++) { + hid_set_field(report->field[i], j, k < size ? raw_data[k] : 0); + k++; + } + data->pending = work; + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + wait_for_completion_interruptible_timeout(&work->ready, HZ*2); + spin_lock_irqsave(&data->lock, flags); + data->pending = NULL; + spin_unlock_irqrestore(&data->lock, flags); + mutex_unlock(&data->mutex); + return work; +} + +/* + * input class device + */ +static int picolcd_raw_keypad(struct picolcd_data *data, + struct hid_report *report, u8 *raw_data, int size) +{ + /* + * Keypad event + * First and second data bytes list currently pressed keys, + * 0x00 means no key and at most 2 keys may be pressed at same time + */ + int i, j; + + /* determine newly pressed keys */ + for (i = 0; i < size; i++) { + unsigned int key_code; + if (raw_data[i] == 0) + continue; + for (j = 0; j < sizeof(data->pressed_keys); j++) + if (data->pressed_keys[j] == raw_data[i]) + goto key_already_down; + for (j = 0; j < sizeof(data->pressed_keys); j++) + if (data->pressed_keys[j] == 0) { + data->pressed_keys[j] = raw_data[i]; + break; + } + input_event(data->input_keys, EV_MSC, MSC_SCAN, raw_data[i]); + if (raw_data[i] < PICOLCD_KEYS) + key_code = data->keycode[raw_data[i]]; + else + key_code = KEY_UNKNOWN; + if (key_code != KEY_UNKNOWN) { + dbg_hid(PICOLCD_NAME " got key press for %u:%d", + raw_data[i], key_code); + input_report_key(data->input_keys, key_code, 1); + } + input_sync(data->input_keys); +key_already_down: + continue; + } + + /* determine newly released keys */ + for (j = 0; j < sizeof(data->pressed_keys); j++) { + unsigned int key_code; + if (data->pressed_keys[j] == 0) + continue; + for (i = 0; i < size; i++) + if (data->pressed_keys[j] == raw_data[i]) + goto key_still_down; + input_event(data->input_keys, EV_MSC, MSC_SCAN, data->pressed_keys[j]); + if (data->pressed_keys[j] < PICOLCD_KEYS) + key_code = data->keycode[data->pressed_keys[j]]; + else + key_code = KEY_UNKNOWN; + if (key_code != KEY_UNKNOWN) { + dbg_hid(PICOLCD_NAME " got key release for %u:%d", + data->pressed_keys[j], key_code); + input_report_key(data->input_keys, key_code, 0); + } + input_sync(data->input_keys); + data->pressed_keys[j] = 0; +key_still_down: + continue; + } + return 1; +} + +static int picolcd_raw_cir(struct picolcd_data *data, + struct hid_report *report, u8 *raw_data, int size) +{ + /* Need understanding of CIR data format to implement ... */ + return 1; +} + +static int picolcd_check_version(struct hid_device *hdev) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + struct picolcd_pending *verinfo; + int ret = 0; + + if (!data) + return -ENODEV; + + verinfo = picolcd_send_and_wait(hdev, REPORT_VERSION, NULL, 0); + if (!verinfo) { + dev_err(&hdev->dev, "no version response from PicoLCD"); + return -ENODEV; + } + + if (verinfo->raw_size == 2) { + if (data->status & PICOLCD_BOOTLOADER) { + dev_info(&hdev->dev, "PicoLCD, bootloader version %d.%d\n", + verinfo->raw_data[0], verinfo->raw_data[1]); + data->version[0] = verinfo->raw_data[0]; + data->version[1] = verinfo->raw_data[1]; + } else { + dev_info(&hdev->dev, "PicoLCD, firmware version %d.%d\n", + verinfo->raw_data[1], verinfo->raw_data[0]); + data->version[0] = verinfo->raw_data[1]; + data->version[1] = verinfo->raw_data[0]; + } + } else { + dev_err(&hdev->dev, "confused, got unexpected version response from PicoLCD\n"); + ret = -EINVAL; + } + kfree(verinfo); + return ret; +} + +/* + * Reset our device and wait for answer to VERSION request + */ +static int picolcd_reset(struct hid_device *hdev) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + struct hid_report *report = picolcd_out_report(REPORT_RESET, hdev); + unsigned long flags; + + if (!data || !report || report->maxfield != 1) + return -ENODEV; + + spin_lock_irqsave(&data->lock, flags); + if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER) + data->status |= PICOLCD_BOOTLOADER; + + /* perform the reset */ + hid_set_field(report->field[0], 0, 1); + usbhid_submit_report(hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + + return picolcd_check_version(hdev); +} + +/* + * The "operation_mode" sysfs attribute + */ +static ssize_t picolcd_operation_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + + if (data->status & PICOLCD_BOOTLOADER) + return snprintf(buf, PAGE_SIZE, "[bootloader] lcd\n"); + else + return snprintf(buf, PAGE_SIZE, "bootloader [lcd]\n"); +} + +static ssize_t picolcd_operation_mode_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + struct hid_report *report = NULL; + size_t cnt = count; + int timeout = 5000; + unsigned u; + unsigned long flags; + + if (cnt >= 3 && strncmp("lcd", buf, 3) == 0) { + if (data->status & PICOLCD_BOOTLOADER) + report = picolcd_out_report(REPORT_EXIT_FLASHER, data->hdev); + buf += 3; + cnt -= 3; + } else if (cnt >= 10 && strncmp("bootloader", buf, 10) == 0) { + if (!(data->status & PICOLCD_BOOTLOADER)) + report = picolcd_out_report(REPORT_EXIT_KEYBOARD, data->hdev); + buf += 10; + cnt -= 10; + } + if (!report) + return -EINVAL; + + while (cnt > 0 && (*buf == ' ' || *buf == '\t')) { + buf++; + cnt--; + } + while (cnt > 0 && (buf[cnt-1] == '\n' || buf[cnt-1] == '\r')) + cnt--; + if (cnt > 0) { + if (sscanf(buf, "%u", &u) != 1) + return -EINVAL; + if (u > 30000) + return -EINVAL; + else + timeout = u; + } + + spin_lock_irqsave(&data->lock, flags); + hid_set_field(report->field[0], 0, timeout & 0xff); + hid_set_field(report->field[0], 1, (timeout >> 8) & 0xff); + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + return count; +} + +static DEVICE_ATTR(operation_mode, 0644, picolcd_operation_mode_show, + picolcd_operation_mode_store); + + +#ifdef CONFIG_DEBUG_FS +/* + * Helper code for HID report level dumping/debugging + */ +static const char *error_codes[] = { + "success", "parameter missing", "data_missing", "block readonly", + "block not erasable", "block too big", "section overflow", + "invalid command length", "invalid data length", +}; + +static void dump_buff_as_hex(char *dst, size_t dst_sz, const u8 *data, + const size_t data_len) +{ + int i, j; + for (i = j = 0; i < data_len && j + 3 < dst_sz; i++) { + dst[j++] = hex_asc[(data[i] >> 4) & 0x0f]; + dst[j++] = hex_asc[data[i] & 0x0f]; + dst[j++] = ' '; + } + if (j < dst_sz) { + dst[j--] = '\0'; + dst[j] = '\n'; + } else + dst[j] = '\0'; +} + +static void picolcd_debug_out_report(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report) +{ + u8 raw_data[70]; + int raw_size = (report->size >> 3) + 1; + char *buff; +#define BUFF_SZ 256 + + /* Avoid unnecessary overhead if debugfs is disabled */ + if (!hdev->debug_events) + return; + + buff = kmalloc(BUFF_SZ, GFP_ATOMIC); + if (!buff) + return; + + snprintf(buff, BUFF_SZ, "\nout report %d (size %d) = ", + report->id, raw_size); + hid_debug_event(hdev, buff); + if (raw_size + 5 > sizeof(raw_data)) { + hid_debug_event(hdev, " TOO BIG\n"); + return; + } else { + raw_data[0] = report->id; + hid_output_report(report, raw_data); + dump_buff_as_hex(buff, BUFF_SZ, raw_data, raw_size); + hid_debug_event(hdev, buff); + } + + switch (report->id) { + case REPORT_LED_STATE: + /* 1 data byte with GPO state */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_LED_STATE", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tGPO state: 0x%02x\n", raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_BRIGHTNESS: + /* 1 data byte with brightness */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_BRIGHTNESS", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tBrightness: 0x%02x\n", raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_CONTRAST: + /* 1 data byte with contrast */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_CONTRAST", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tContrast: 0x%02x\n", raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_RESET: + /* 2 data bytes with reset duration in ms */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_RESET", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tDuration: 0x%02x%02x (%dms)\n", + raw_data[2], raw_data[1], raw_data[2] << 8 | raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_LCD_CMD: + /* 63 data bytes with LCD commands */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_LCD_CMD", report->id, raw_size-1); + hid_debug_event(hdev, buff); + /* TODO: format decoding */ + break; + case REPORT_LCD_DATA: + /* 63 data bytes with LCD data */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_LCD_CMD", report->id, raw_size-1); + /* TODO: format decoding */ + hid_debug_event(hdev, buff); + break; + case REPORT_LCD_CMD_DATA: + /* 63 data bytes with LCD commands and data */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_LCD_CMD", report->id, raw_size-1); + /* TODO: format decoding */ + hid_debug_event(hdev, buff); + break; + case REPORT_EE_READ: + /* 3 data bytes with read area description */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_EE_READ", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + hid_debug_event(hdev, buff); + break; + case REPORT_EE_WRITE: + /* 3+1..20 data bytes with write area description */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_EE_WRITE", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + hid_debug_event(hdev, buff); + if (raw_data[3] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + } else if (raw_data[3] + 4 <= raw_size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + } + hid_debug_event(hdev, buff); + break; + case REPORT_ERASE_MEMORY: + case REPORT_BL_ERASE_MEMORY: + /* 3 data bytes with pointer inside erase block */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_ERASE_MEMORY", report->id, raw_size-1); + hid_debug_event(hdev, buff); + switch (data->addr_sz) { + case 2: + snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + break; + case 3: + snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x%02x\n", + raw_data[3], raw_data[2], raw_data[1]); + break; + default: + snprintf(buff, BUFF_SZ, "\tNot supported\n"); + } + hid_debug_event(hdev, buff); + break; + case REPORT_READ_MEMORY: + case REPORT_BL_READ_MEMORY: + /* 4 data bytes with read area description */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_READ_MEMORY", report->id, raw_size-1); + hid_debug_event(hdev, buff); + switch (data->addr_sz) { + case 2: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + break; + case 3: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", + raw_data[3], raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); + break; + default: + snprintf(buff, BUFF_SZ, "\tNot supported\n"); + } + hid_debug_event(hdev, buff); + break; + case REPORT_WRITE_MEMORY: + case REPORT_BL_WRITE_MEMORY: + /* 4+1..32 data bytes with write adrea description */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_WRITE_MEMORY", report->id, raw_size-1); + hid_debug_event(hdev, buff); + switch (data->addr_sz) { + case 2: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + hid_debug_event(hdev, buff); + if (raw_data[3] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + } else if (raw_data[3] + 4 <= raw_size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + } + break; + case 3: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", + raw_data[3], raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); + hid_debug_event(hdev, buff); + if (raw_data[4] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + } else if (raw_data[4] + 5 <= raw_size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + } + break; + default: + snprintf(buff, BUFF_SZ, "\tNot supported\n"); + } + hid_debug_event(hdev, buff); + break; + case REPORT_SPLASH_RESTART: + /* TODO */ + break; + case REPORT_EXIT_KEYBOARD: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_EXIT_KEYBOARD", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n", + raw_data[1] | (raw_data[2] << 8), + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_VERSION: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_VERSION", report->id, raw_size-1); + hid_debug_event(hdev, buff); + break; + case REPORT_DEVID: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_DEVID", report->id, raw_size-1); + hid_debug_event(hdev, buff); + break; + case REPORT_SPLASH_SIZE: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_SPLASH_SIZE", report->id, raw_size-1); + hid_debug_event(hdev, buff); + break; + case REPORT_HOOK_VERSION: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_HOOK_VERSION", report->id, raw_size-1); + hid_debug_event(hdev, buff); + break; + case REPORT_EXIT_FLASHER: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_VERSION", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n", + raw_data[1] | (raw_data[2] << 8), + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + break; + default: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "", report->id, raw_size-1); + hid_debug_event(hdev, buff); + break; + } + wake_up_interruptible(&hdev->debug_wait); + kfree(buff); +} + +static void picolcd_debug_raw_event(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report, + u8 *raw_data, int size) +{ + char *buff; + +#define BUFF_SZ 256 + /* Avoid unnecessary overhead if debugfs is disabled */ + if (!hdev->debug_events) + return; + + buff = kmalloc(BUFF_SZ, GFP_ATOMIC); + if (!buff) + return; + + switch (report->id) { + case REPORT_ERROR_CODE: + /* 2 data bytes with affected report and error code */ + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_ERROR_CODE", report->id, size-1); + hid_debug_event(hdev, buff); + if (raw_data[2] < ARRAY_SIZE(error_codes)) + snprintf(buff, BUFF_SZ, "\tError code 0x%02x (%s) in reply to report 0x%02x\n", + raw_data[2], error_codes[raw_data[2]], raw_data[1]); + else + snprintf(buff, BUFF_SZ, "\tError code 0x%02x in reply to report 0x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_KEY_STATE: + /* 2 data bytes with key state */ + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_KEY_STATE", report->id, size-1); + hid_debug_event(hdev, buff); + if (raw_data[1] == 0) + snprintf(buff, BUFF_SZ, "\tNo key pressed\n"); + else if (raw_data[2] == 0) + snprintf(buff, BUFF_SZ, "\tOne key pressed: 0x%02x (%d)\n", + raw_data[1], raw_data[1]); + else + snprintf(buff, BUFF_SZ, "\tTwo keys pressed: 0x%02x (%d), 0x%02x (%d)\n", + raw_data[1], raw_data[1], raw_data[2], raw_data[2]); + hid_debug_event(hdev, buff); + break; + case REPORT_IR_DATA: + /* Up to 20 byes of IR scancode data */ + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_IR_DATA", report->id, size-1); + hid_debug_event(hdev, buff); + if (raw_data[1] == 0) { + snprintf(buff, BUFF_SZ, "\tUnexpectedly 0 data length\n"); + hid_debug_event(hdev, buff); + } else if (raw_data[1] + 1 <= size) { + snprintf(buff, BUFF_SZ, "\tData length: %d\n\tIR Data: ", + raw_data[1]-1); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+2, raw_data[1]-1); + hid_debug_event(hdev, buff); + } else { + snprintf(buff, BUFF_SZ, "\tOverflowing data length: %d\n", + raw_data[1]-1); + hid_debug_event(hdev, buff); + } + break; + case REPORT_EE_DATA: + /* Data buffer in response to REPORT_EE_READ or REPORT_EE_WRITE */ + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_EE_DATA", report->id, size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + hid_debug_event(hdev, buff); + if (raw_data[3] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + hid_debug_event(hdev, buff); + } else if (raw_data[3] + 4 <= size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); + hid_debug_event(hdev, buff); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + hid_debug_event(hdev, buff); + } + break; + case REPORT_MEMORY: + /* Data buffer in response to REPORT_READ_MEMORY or REPORT_WRTIE_MEMORY */ + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_MEMORY", report->id, size-1); + hid_debug_event(hdev, buff); + switch (data->addr_sz) { + case 2: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + hid_debug_event(hdev, buff); + if (raw_data[3] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + } else if (raw_data[3] + 4 <= size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + } + break; + case 3: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", + raw_data[3], raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); + hid_debug_event(hdev, buff); + if (raw_data[4] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + } else if (raw_data[4] + 5 <= size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + } + break; + default: + snprintf(buff, BUFF_SZ, "\tNot supported\n"); + } + hid_debug_event(hdev, buff); + break; + case REPORT_VERSION: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_VERSION", report->id, size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_BL_ERASE_MEMORY: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_BL_ERASE_MEMORY", report->id, size-1); + hid_debug_event(hdev, buff); + /* TODO */ + break; + case REPORT_BL_READ_MEMORY: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_BL_READ_MEMORY", report->id, size-1); + hid_debug_event(hdev, buff); + /* TODO */ + break; + case REPORT_BL_WRITE_MEMORY: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_BL_WRITE_MEMORY", report->id, size-1); + hid_debug_event(hdev, buff); + /* TODO */ + break; + case REPORT_DEVID: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_DEVID", report->id, size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tSerial: 0x%02x%02x%02x%02x\n", + raw_data[1], raw_data[2], raw_data[3], raw_data[4]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tType: 0x%02x\n", + raw_data[5]); + hid_debug_event(hdev, buff); + break; + case REPORT_SPLASH_SIZE: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_SPLASH_SIZE", report->id, size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tTotal splash space: %d\n", + (raw_data[2] << 8) | raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tUsed splash space: %d\n", + (raw_data[4] << 8) | raw_data[3]); + hid_debug_event(hdev, buff); + break; + case REPORT_HOOK_VERSION: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_HOOK_VERSION", report->id, size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n", + raw_data[1], raw_data[2]); + hid_debug_event(hdev, buff); + break; + default: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "", report->id, size-1); + hid_debug_event(hdev, buff); + break; + } + wake_up_interruptible(&hdev->debug_wait); + kfree(buff); +} +#else +#define picolcd_debug_raw_event(data, hdev, report, raw_data, size) +#endif + +/* + * Handle raw report as sent by device + */ +static int picolcd_raw_event(struct hid_device *hdev, + struct hid_report *report, u8 *raw_data, int size) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + unsigned long flags; + int ret = 0; + + if (!data) + return 1; + + if (report->id == REPORT_KEY_STATE) { + if (data->input_keys) + ret = picolcd_raw_keypad(data, report, raw_data+1, size-1); + } else if (report->id == REPORT_IR_DATA) { + if (data->input_cir) + ret = picolcd_raw_cir(data, report, raw_data+1, size-1); + } else { + spin_lock_irqsave(&data->lock, flags); + /* + * We let the caller of picolcd_send_and_wait() check if the + * report we got is one of the expected ones or not. + */ + if (data->pending) { + memcpy(data->pending->raw_data, raw_data+1, size-1); + data->pending->raw_size = size-1; + data->pending->in_report = report; + complete(&data->pending->ready); + } + spin_unlock_irqrestore(&data->lock, flags); + } + + picolcd_debug_raw_event(data, hdev, report, raw_data, size); + return 1; +} + +/* initialize keypad input device */ +static int picolcd_init_keys(struct picolcd_data *data, + struct hid_report *report) +{ + struct hid_device *hdev = data->hdev; + struct input_dev *idev; + int error, i; + + if (!report) + return -ENODEV; + if (report->maxfield != 1 || report->field[0]->report_count != 2 || + report->field[0]->report_size != 8) { + dev_err(&hdev->dev, "unsupported KEY_STATE report"); + return -EINVAL; + } + + idev = input_allocate_device(); + if (idev == NULL) { + dev_err(&hdev->dev, "failed to allocate input device"); + return -ENOMEM; + } + input_set_drvdata(idev, hdev); + memcpy(data->keycode, def_keymap, sizeof(def_keymap)); + idev->name = hdev->name; + idev->phys = hdev->phys; + idev->uniq = hdev->uniq; + idev->id.bustype = hdev->bus; + idev->id.vendor = hdev->vendor; + idev->id.product = hdev->product; + idev->id.version = hdev->version; + idev->dev.parent = hdev->dev.parent; + idev->keycode = &data->keycode; + idev->keycodemax = PICOLCD_KEYS; + idev->keycodesize = sizeof(data->keycode[0]); + input_set_capability(idev, EV_MSC, MSC_SCAN); + set_bit(EV_REP, idev->evbit); + for (i = 0; i < PICOLCD_KEYS; i++) + input_set_capability(idev, EV_KEY, data->keycode[i]); + error = input_register_device(idev); + if (error) { + dev_err(&hdev->dev, "error registering the input device"); + input_free_device(idev); + return error; + } + data->input_keys = idev; + return 0; +} + +static void picolcd_exit_keys(struct picolcd_data *data) +{ + struct input_dev *idev = data->input_keys; + + data->input_keys = NULL; + if (idev) + input_unregister_device(idev); +} + +/* initialize CIR input device */ +static inline int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report) +{ + /* support not implemented yet */ + return 0; +} + +static inline void picolcd_exit_cir(struct picolcd_data *data) +{ +} + +static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data) +{ + struct hid_report *report; + int error; + + error = picolcd_check_version(hdev); + if (error) + return error; + + if (data->version[0] != 0 && data->version[1] != 3) + dev_info(&hdev->dev, "Device with untested firmware revision, " + "please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n", + dev_name(&hdev->dev)); + + /* Setup keypad input device */ + error = picolcd_init_keys(data, picolcd_in_report(REPORT_KEY_STATE, hdev)); + if (error) + goto err; + + /* Setup CIR input device */ + error = picolcd_init_cir(data, picolcd_in_report(REPORT_IR_DATA, hdev)); + if (error) + goto err; + +#ifdef CONFIG_DEBUG_FS + report = picolcd_out_report(REPORT_READ_MEMORY, hdev); + if (report && report->maxfield == 1 && report->field[0]->report_size == 8) + data->addr_sz = report->field[0]->report_count - 1; + else + data->addr_sz = -1; +#endif + return 0; +err: + picolcd_exit_cir(data); + picolcd_exit_keys(data); + return error; +} + +static int picolcd_probe_bootloader(struct hid_device *hdev, struct picolcd_data *data) +{ + struct hid_report *report; + int error; + + error = picolcd_check_version(hdev); + if (error) + return error; + + if (data->version[0] != 1 && data->version[1] != 0) + dev_info(&hdev->dev, "Device with untested bootloader revision, " + "please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n", + dev_name(&hdev->dev)); + +#ifdef CONFIG_DEBUG_FS + report = picolcd_out_report(REPORT_BL_READ_MEMORY, hdev); + if (report && report->maxfield == 1 && report->field[0]->report_size == 8) + data->addr_sz = report->field[0]->report_count - 1; + else + data->addr_sz = -1; +#endif + return 0; +} + +static int picolcd_probe(struct hid_device *hdev, + const struct hid_device_id *id) +{ + struct picolcd_data *data; + int error = -ENOMEM; + + dbg_hid(PICOLCD_NAME " hardware probe...\n"); + + /* + * Let's allocate the picolcd data structure, set some reasonable + * defaults, and associate it with the device + */ + data = kzalloc(sizeof(struct picolcd_data), GFP_KERNEL); + if (data == NULL) { + dev_err(&hdev->dev, "can't allocate space for Minibox PicoLCD device data\n"); + error = -ENOMEM; + goto err_no_cleanup; + } + + spin_lock_init(&data->lock); + mutex_init(&data->mutex); + data->hdev = hdev; + if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER) + data->status |= PICOLCD_BOOTLOADER; + hid_set_drvdata(hdev, data); + + /* Parse the device reports and start it up */ + error = hid_parse(hdev); + if (error) { + dev_err(&hdev->dev, "device report parse failed\n"); + goto err_cleanup_data; + } + + /* We don't use hidinput but hid_hw_start() fails if nothing is + * claimed. So spoof claimed input. */ + hdev->claimed = HID_CLAIMED_INPUT; + error = hid_hw_start(hdev, 0); + hdev->claimed = 0; + if (error) { + dev_err(&hdev->dev, "hardware start failed\n"); + goto err_cleanup_data; + } + + error = hdev->ll_driver->open(hdev); + if (error) { + dev_err(&hdev->dev, "failed to open input interrupt pipe for key and IR events\n"); + goto err_cleanup_hid_hw; + } + + error = device_create_file(&hdev->dev, &dev_attr_operation_mode); + if (error) { + dev_err(&hdev->dev, "failed to create sysfs attributes\n"); + goto err_cleanup_hid_ll; + } + + if (data->status & PICOLCD_BOOTLOADER) + error = picolcd_probe_bootloader(hdev, data); + else + error = picolcd_probe_lcd(hdev, data); + if (error) + goto err_cleanup_sysfs; + + dbg_hid(PICOLCD_NAME " activated and initialized\n"); + return 0; + +err_cleanup_sysfs: + device_remove_file(&hdev->dev, &dev_attr_operation_mode); +err_cleanup_hid_ll: + hdev->ll_driver->close(hdev); +err_cleanup_hid_hw: + hid_hw_stop(hdev); +err_cleanup_data: + kfree(data); +err_no_cleanup: + hid_set_drvdata(hdev, NULL); + + return error; +} + +static void picolcd_remove(struct hid_device *hdev) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + unsigned long flags; + + dbg_hid(PICOLCD_NAME " hardware remove...\n"); + spin_lock_irqsave(&data->lock, flags); + data->status |= PICOLCD_FAILED; + spin_unlock_irqrestore(&data->lock, flags); + + device_remove_file(&hdev->dev, &dev_attr_operation_mode); + hdev->ll_driver->close(hdev); + hid_hw_stop(hdev); + hid_set_drvdata(hdev, NULL); + + /* Shortcut potential pending reply that will never arrive */ + spin_lock_irqsave(&data->lock, flags); + if (data->pending) + complete(&data->pending->ready); + spin_unlock_irqrestore(&data->lock, flags); + + /* Cleanup input */ + picolcd_exit_cir(data); + picolcd_exit_keys(data); + + mutex_destroy(&data->mutex); + /* Finally, clean up the picolcd data itself */ + kfree(data); +} + +static const struct hid_device_id picolcd_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) }, + { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) }, + { } +}; +MODULE_DEVICE_TABLE(hid, picolcd_devices); + +static struct hid_driver picolcd_driver = { + .name = "hid-picolcd", + .id_table = picolcd_devices, + .probe = picolcd_probe, + .remove = picolcd_remove, + .raw_event = picolcd_raw_event, +}; + +static int __init picolcd_init(void) +{ + return hid_register_driver(&picolcd_driver); +} + +static void __exit picolcd_exit(void) +{ + hid_unregister_driver(&picolcd_driver); +} + +module_init(picolcd_init); +module_exit(picolcd_exit); +MODULE_DESCRIPTION("Minibox graphics PicoLCD Driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.2 From b8c21cf697d165999cc21a90e6caa73690ac6190 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Tue, 30 Mar 2010 22:34:30 +0200 Subject: HID: add framebuffer support to PicoLCD device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add framebuffer support to PicoLCD device with use of deferred-io. Only changed areas of framebuffer get sent to device in order to save USB bandwidth and especially resources on PicoLCD device or allow higher refresh rate for a small area. Changed tiles are determined while updating shadow framebuffer. Signed-off-by: Bruno Prémont Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 7 +- drivers/hid/hid-picolcd.c | 567 +++++++++++++++++++++++++++++++++++++++++- drivers/hid/usbhid/hid-core.c | 1 + 3 files changed, 573 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 138ba6a277ee..a813ea9c792d 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -265,6 +265,11 @@ config HID_PETALYNX config HID_PICOLCD tristate "PicoLCD (graphic version)" depends on USB_HID + select FB_DEFERRED_IO if FB + select FB_SYS_FILLRECT if FB + select FB_SYS_COPYAREA if FB + select FB_SYS_IMAGEBLIT if FB + select FB_SYS_FOPS if FB ---help--- This provides support for Minibox PicoLCD devices, currently only the graphical ones are supported. @@ -272,8 +277,8 @@ config HID_PICOLCD This includes support for the following device features: - Keypad - Switching between Firmware and Flash mode - Features that are not (yet) supported: - Framebuffer for monochrome 256x64 display + Features that are not (yet) supported: - Backlight control - Contrast control - IR diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c index c7855f388898..e14464789e10 100644 --- a/drivers/hid/hid-picolcd.c +++ b/drivers/hid/hid-picolcd.c @@ -24,6 +24,9 @@ #include "usbhid/usbhid.h" #include +#include +#include + #include #include @@ -69,6 +72,59 @@ #define REPORT_HOOK_VERSION 0xf7 /* LCD: IN[2], OUT[1] */ #define REPORT_EXIT_FLASHER 0xff /* Bootloader: OUT[2] */ +#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE) +/* Framebuffer + * + * The PicoLCD use a Topway LCD module of 256x64 pixel + * This display area is tiled over 4 controllers with 8 tiles + * each. Each tile has 8x64 pixel, each data byte representing + * a 1-bit wide vertical line of the tile. + * + * The display can be updated at a tile granularity. + * + * Chip 1 Chip 2 Chip 3 Chip 4 + * +----------------+----------------+----------------+----------------+ + * | Tile 1 | Tile 1 | Tile 1 | Tile 1 | + * +----------------+----------------+----------------+----------------+ + * | Tile 2 | Tile 2 | Tile 2 | Tile 2 | + * +----------------+----------------+----------------+----------------+ + * ... + * +----------------+----------------+----------------+----------------+ + * | Tile 8 | Tile 8 | Tile 8 | Tile 8 | + * +----------------+----------------+----------------+----------------+ + */ +#define PICOLCDFB_NAME "picolcdfb" +#define PICOLCDFB_WIDTH (256) +#define PICOLCDFB_HEIGHT (64) +#define PICOLCDFB_SIZE (PICOLCDFB_WIDTH * PICOLCDFB_HEIGHT / 8) + +#define PICOLCDFB_UPDATE_RATE_LIMIT 10 +#define PICOLCDFB_UPDATE_RATE_DEFAULT 2 + +/* Framebuffer visual structures */ +static const struct fb_fix_screeninfo picolcdfb_fix = { + .id = PICOLCDFB_NAME, + .type = FB_TYPE_PACKED_PIXELS, + .visual = FB_VISUAL_MONO01, + .xpanstep = 0, + .ypanstep = 0, + .ywrapstep = 0, + .line_length = PICOLCDFB_WIDTH / 8, + .accel = FB_ACCEL_NONE, +}; + +static const struct fb_var_screeninfo picolcdfb_var = { + .xres = PICOLCDFB_WIDTH, + .yres = PICOLCDFB_HEIGHT, + .xres_virtual = PICOLCDFB_WIDTH, + .yres_virtual = PICOLCDFB_HEIGHT, + .width = 103, + .height = 26, + .bits_per_pixel = 1, + .grayscale = 1, +}; +#endif /* CONFIG_FB */ + /* Input device * * The PicoLCD has an IR receiver header, a built-in keypad with 5 keys @@ -118,6 +174,16 @@ struct picolcd_data { struct input_dev *input_cir; unsigned short keycode[PICOLCD_KEYS]; +#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE) + /* Framebuffer stuff */ + u8 fb_update_rate; + u8 fb_bpp; + u8 *fb_vbitmap; /* local copy of what was sent to PicoLCD */ + u8 *fb_bitmap; /* framebuffer */ + struct fb_info *fb_info; + struct fb_deferred_io fb_defio; +#endif /* CONFIG_FB */ + /* Housekeeping stuff */ spinlock_t lock; struct mutex mutex; @@ -125,6 +191,7 @@ struct picolcd_data { int status; #define PICOLCD_BOOTLOADER 1 #define PICOLCD_FAILED 2 +#define PICOLCD_READY_FB 4 }; @@ -197,6 +264,486 @@ static struct picolcd_pending *picolcd_send_and_wait(struct hid_device *hdev, return work; } +#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE) +/* Send a given tile to PicoLCD */ +static int picolcd_fb_send_tile(struct hid_device *hdev, int chip, int tile) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + struct hid_report *report1 = picolcd_out_report(REPORT_LCD_CMD_DATA, hdev); + struct hid_report *report2 = picolcd_out_report(REPORT_LCD_DATA, hdev); + unsigned long flags; + u8 *tdata; + int i; + + if (!report1 || report1->maxfield != 1 || !report2 || report2->maxfield != 1) + return -ENODEV; + + spin_lock_irqsave(&data->lock, flags); + hid_set_field(report1->field[0], 0, chip << 2); + hid_set_field(report1->field[0], 1, 0x02); + hid_set_field(report1->field[0], 2, 0x00); + hid_set_field(report1->field[0], 3, 0x00); + hid_set_field(report1->field[0], 4, 0xb8 | tile); + hid_set_field(report1->field[0], 5, 0x00); + hid_set_field(report1->field[0], 6, 0x00); + hid_set_field(report1->field[0], 7, 0x40); + hid_set_field(report1->field[0], 8, 0x00); + hid_set_field(report1->field[0], 9, 0x00); + hid_set_field(report1->field[0], 10, 32); + + hid_set_field(report2->field[0], 0, (chip << 2) | 0x01); + hid_set_field(report2->field[0], 1, 0x00); + hid_set_field(report2->field[0], 2, 0x00); + hid_set_field(report2->field[0], 3, 32); + + tdata = data->fb_vbitmap + (tile * 4 + chip) * 64; + for (i = 0; i < 64; i++) + if (i < 32) + hid_set_field(report1->field[0], 11 + i, tdata[i]); + else + hid_set_field(report2->field[0], 4 + i - 32, tdata[i]); + + usbhid_submit_report(data->hdev, report1, USB_DIR_OUT); + usbhid_submit_report(data->hdev, report2, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + return 0; +} + +/* Translate a single tile*/ +static int picolcd_fb_update_tile(u8 *vbitmap, const u8 *bitmap, int bpp, + int chip, int tile) +{ + int i, b, changed = 0; + u8 tdata[64]; + u8 *vdata = vbitmap + (tile * 4 + chip) * 64; + + if (bpp == 1) { + for (b = 7; b >= 0; b--) { + const u8 *bdata = bitmap + tile * 256 + chip * 8 + b * 32; + for (i = 0; i < 64; i++) { + tdata[i] <<= 1; + tdata[i] |= (bdata[i/8] >> (7 - i % 8)) & 0x01; + } + } + } else if (bpp == 8) { + for (b = 7; b >= 0; b--) { + const u8 *bdata = bitmap + (tile * 256 + chip * 8 + b * 32) * 8; + for (i = 0; i < 64; i++) { + tdata[i] <<= 1; + tdata[i] |= (bdata[i] & 0x80) ? 0x01 : 0x00; + } + } + } else { + /* Oops, we should never get here! */ + WARN_ON(1); + return 0; + } + + for (i = 0; i < 64; i++) + if (tdata[i] != vdata[i]) { + changed = 1; + vdata[i] = tdata[i]; + } + return changed; +} + +/* Reconfigure LCD display */ +static int picolcd_fb_reset(struct picolcd_data *data, int clear) +{ + struct hid_report *report = picolcd_out_report(REPORT_LCD_CMD, data->hdev); + int i, j; + unsigned long flags; + static const u8 mapcmd[8] = { 0x00, 0x02, 0x00, 0x64, 0x3f, 0x00, 0x64, 0xc0 }; + + if (!report || report->maxfield != 1) + return -ENODEV; + + spin_lock_irqsave(&data->lock, flags); + for (i = 0; i < 4; i++) { + for (j = 0; j < report->field[0]->maxusage; j++) + if (j == 0) + hid_set_field(report->field[0], j, i << 2); + else if (j < sizeof(mapcmd)) + hid_set_field(report->field[0], j, mapcmd[j]); + else + hid_set_field(report->field[0], j, 0); + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + } + + data->status |= PICOLCD_READY_FB; + spin_unlock_irqrestore(&data->lock, flags); + + if (data->fb_bitmap) { + if (clear) { + memset(data->fb_vbitmap, 0xff, PICOLCDFB_SIZE); + memset(data->fb_bitmap, 0, PICOLCDFB_SIZE*data->fb_bpp); + } else { + /* invert 1 byte in each tile to force resend */ + for (i = 0; i < PICOLCDFB_SIZE; i += 64) + data->fb_vbitmap[i] = ~data->fb_vbitmap[i]; + } + } + + /* schedule first output of framebuffer */ + if (data->fb_info) + schedule_delayed_work(&data->fb_info->deferred_work, 0); + + return 0; +} + +/* Update fb_vbitmap from the screen_base and send changed tiles to device */ +static void picolcd_fb_update(struct picolcd_data *data) +{ + int chip, tile, n; + unsigned long flags; + + spin_lock_irqsave(&data->lock, flags); + if (!(data->status & PICOLCD_READY_FB)) { + spin_unlock_irqrestore(&data->lock, flags); + picolcd_fb_reset(data, 0); + } else { + spin_unlock_irqrestore(&data->lock, flags); + } + + /* + * Translate the framebuffer into the format needed by the PicoLCD. + * See display layout above. + * Do this one tile after the other and push those tiles that changed. + * + * Wait for our IO to complete as otherwise we might flood the queue! + */ + n = 0; + for (chip = 0; chip < 4; chip++) + for (tile = 0; tile < 8; tile++) + if (picolcd_fb_update_tile(data->fb_vbitmap, + data->fb_bitmap, data->fb_bpp, chip, tile)) { + n += 2; + if (n >= HID_OUTPUT_FIFO_SIZE / 2) { + usbhid_wait_io(data->hdev); + n = 0; + } + picolcd_fb_send_tile(data->hdev, chip, tile); + } + if (n) + usbhid_wait_io(data->hdev); +} + +/* Stub to call the system default and update the image on the picoLCD */ +static void picolcd_fb_fillrect(struct fb_info *info, + const struct fb_fillrect *rect) +{ + if (!info->par) + return; + sys_fillrect(info, rect); + + schedule_delayed_work(&info->deferred_work, 0); +} + +/* Stub to call the system default and update the image on the picoLCD */ +static void picolcd_fb_copyarea(struct fb_info *info, + const struct fb_copyarea *area) +{ + if (!info->par) + return; + sys_copyarea(info, area); + + schedule_delayed_work(&info->deferred_work, 0); +} + +/* Stub to call the system default and update the image on the picoLCD */ +static void picolcd_fb_imageblit(struct fb_info *info, const struct fb_image *image) +{ + if (!info->par) + return; + sys_imageblit(info, image); + + schedule_delayed_work(&info->deferred_work, 0); +} + +/* + * this is the slow path from userspace. they can seek and write to + * the fb. it's inefficient to do anything less than a full screen draw + */ +static ssize_t picolcd_fb_write(struct fb_info *info, const char __user *buf, + size_t count, loff_t *ppos) +{ + ssize_t ret; + if (!info->par) + return -ENODEV; + ret = fb_sys_write(info, buf, count, ppos); + if (ret >= 0) + schedule_delayed_work(&info->deferred_work, 0); + return ret; +} + +static int picolcd_fb_blank(int blank, struct fb_info *info) +{ + if (!info->par) + return -ENODEV; + /* We let fb notification do this for us via lcd/backlight device */ + return 0; +} + +static void picolcd_fb_destroy(struct fb_info *info) +{ + struct picolcd_data *data = info->par; + info->par = NULL; + if (data) + data->fb_info = NULL; + fb_deferred_io_cleanup(info); + framebuffer_release(info); +} + +static int picolcd_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + __u32 bpp = var->bits_per_pixel; + __u32 activate = var->activate; + + /* only allow 1/8 bit depth (8-bit is grayscale) */ + *var = picolcdfb_var; + var->activate = activate; + if (bpp >= 8) + var->bits_per_pixel = 8; + else + var->bits_per_pixel = 1; + return 0; +} + +static int picolcd_set_par(struct fb_info *info) +{ + struct picolcd_data *data = info->par; + u8 *o_fb, *n_fb; + if (info->var.bits_per_pixel == data->fb_bpp) + return 0; + /* switch between 1/8 bit depths */ + if (info->var.bits_per_pixel != 1 && info->var.bits_per_pixel != 8) + return -EINVAL; + + o_fb = data->fb_bitmap; + n_fb = vmalloc(PICOLCDFB_SIZE*info->var.bits_per_pixel); + if (!n_fb) + return -ENOMEM; + + fb_deferred_io_cleanup(info); + /* translate FB content to new bits-per-pixel */ + if (info->var.bits_per_pixel == 1) { + int i, b; + for (i = 0; i < PICOLCDFB_SIZE; i++) { + u8 p = 0; + for (b = 0; b < 8; b++) { + p <<= 1; + p |= o_fb[i*8+b] ? 0x01 : 0x00; + } + } + info->fix.visual = FB_VISUAL_MONO01; + info->fix.line_length = PICOLCDFB_WIDTH / 8; + } else { + int i; + for (i = 0; i < PICOLCDFB_SIZE * 8; i++) + n_fb[i] = o_fb[i/8] & (0x01 << (7 - i % 8)) ? 0xff : 0x00; + info->fix.visual = FB_VISUAL_TRUECOLOR; + info->fix.line_length = PICOLCDFB_WIDTH; + } + + data->fb_bitmap = n_fb; + data->fb_bpp = info->var.bits_per_pixel; + info->screen_base = (char __force __iomem *)n_fb; + info->fix.smem_start = (unsigned long)n_fb; + info->fix.smem_len = PICOLCDFB_SIZE*data->fb_bpp; + fb_deferred_io_init(info); + vfree(o_fb); + return 0; +} + +/* Note this can't be const because of struct fb_info definition */ +static struct fb_ops picolcdfb_ops = { + .owner = THIS_MODULE, + .fb_destroy = picolcd_fb_destroy, + .fb_read = fb_sys_read, + .fb_write = picolcd_fb_write, + .fb_blank = picolcd_fb_blank, + .fb_fillrect = picolcd_fb_fillrect, + .fb_copyarea = picolcd_fb_copyarea, + .fb_imageblit = picolcd_fb_imageblit, + .fb_check_var = picolcd_fb_check_var, + .fb_set_par = picolcd_set_par, +}; + + +/* Callback from deferred IO workqueue */ +static void picolcd_fb_deferred_io(struct fb_info *info, struct list_head *pagelist) +{ + picolcd_fb_update(info->par); +} + +static const struct fb_deferred_io picolcd_fb_defio = { + .delay = HZ / PICOLCDFB_UPDATE_RATE_DEFAULT, + .deferred_io = picolcd_fb_deferred_io, +}; + + +/* + * The "fb_update_rate" sysfs attribute + */ +static ssize_t picolcd_fb_update_rate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + unsigned i, fb_update_rate = data->fb_update_rate; + size_t ret = 0; + + for (i = 1; i <= PICOLCDFB_UPDATE_RATE_LIMIT; i++) + if (ret >= PAGE_SIZE) + break; + else if (i == fb_update_rate) + ret += snprintf(buf+ret, PAGE_SIZE-ret, "[%u] ", i); + else + ret += snprintf(buf+ret, PAGE_SIZE-ret, "%u ", i); + if (ret > 0) + buf[min(ret, (size_t)PAGE_SIZE)-1] = '\n'; + return ret; +} + +static ssize_t picolcd_fb_update_rate_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + int i; + unsigned u; + + if (count < 1 || count > 10) + return -EINVAL; + + i = sscanf(buf, "%u", &u); + if (i != 1) + return -EINVAL; + + if (u > PICOLCDFB_UPDATE_RATE_LIMIT) + return -ERANGE; + else if (u == 0) + u = PICOLCDFB_UPDATE_RATE_DEFAULT; + + data->fb_update_rate = u; + data->fb_defio.delay = HZ / data->fb_update_rate; + return count; +} + +static DEVICE_ATTR(fb_update_rate, 0666, picolcd_fb_update_rate_show, + picolcd_fb_update_rate_store); + +/* initialize Framebuffer device */ +static int picolcd_init_framebuffer(struct picolcd_data *data) +{ + struct device *dev = &data->hdev->dev; + struct fb_info *info = NULL; + int error = -ENOMEM; + u8 *fb_vbitmap = NULL; + u8 *fb_bitmap = NULL; + + fb_bitmap = vmalloc(PICOLCDFB_SIZE*picolcdfb_var.bits_per_pixel); + if (fb_bitmap == NULL) { + dev_err(dev, "can't get a free page for framebuffer\n"); + goto err_nomem; + } + + fb_vbitmap = kmalloc(PICOLCDFB_SIZE, GFP_KERNEL); + if (fb_vbitmap == NULL) { + dev_err(dev, "can't alloc vbitmap image buffer\n"); + goto err_nomem; + } + + data->fb_update_rate = PICOLCDFB_UPDATE_RATE_DEFAULT; + data->fb_defio = picolcd_fb_defio; + info = framebuffer_alloc(0, dev); + if (info == NULL) { + dev_err(dev, "failed to allocate a framebuffer\n"); + goto err_nomem; + } + + info->fbdefio = &data->fb_defio; + info->screen_base = (char __force __iomem *)fb_bitmap; + info->fbops = &picolcdfb_ops; + info->var = picolcdfb_var; + info->fix = picolcdfb_fix; + info->fix.smem_len = PICOLCDFB_SIZE; + info->fix.smem_start = (unsigned long)fb_bitmap; + info->par = data; + info->flags = FBINFO_FLAG_DEFAULT; + + data->fb_vbitmap = fb_vbitmap; + data->fb_bitmap = fb_bitmap; + data->fb_bpp = picolcdfb_var.bits_per_pixel; + error = picolcd_fb_reset(data, 1); + if (error) { + dev_err(dev, "failed to configure display\n"); + goto err_cleanup; + } + error = device_create_file(dev, &dev_attr_fb_update_rate); + if (error) { + dev_err(dev, "failed to create sysfs attributes\n"); + goto err_cleanup; + } + data->fb_info = info; + error = register_framebuffer(info); + if (error) { + dev_err(dev, "failed to register framebuffer\n"); + goto err_sysfs; + } + fb_deferred_io_init(info); + /* schedule first output of framebuffer */ + schedule_delayed_work(&info->deferred_work, 0); + return 0; + +err_sysfs: + device_remove_file(dev, &dev_attr_fb_update_rate); +err_cleanup: + data->fb_vbitmap = NULL; + data->fb_bitmap = NULL; + data->fb_bpp = 0; + data->fb_info = NULL; + +err_nomem: + framebuffer_release(info); + vfree(fb_bitmap); + kfree(fb_vbitmap); + return error; +} + +static void picolcd_exit_framebuffer(struct picolcd_data *data) +{ + struct fb_info *info = data->fb_info; + u8 *fb_vbitmap = data->fb_vbitmap; + u8 *fb_bitmap = data->fb_bitmap; + + if (!info) + return; + + data->fb_vbitmap = NULL; + data->fb_bitmap = NULL; + data->fb_bpp = 0; + data->fb_info = NULL; + device_remove_file(&data->hdev->dev, &dev_attr_fb_update_rate); + fb_deferred_io_cleanup(info); + unregister_framebuffer(info); + vfree(fb_bitmap); + kfree(fb_vbitmap); +} + + +#else +static inline int picolcd_fb_reset(struct picolcd_data *data, int clear) +{ + return 0; +} +static inline int picolcd_init_framebuffer(struct picolcd_data *data) +{ + return 0; +} +static void picolcd_exit_framebuffer(struct picolcd_data *data) +{ +} +#endif /* CONFIG_FB */ + /* * input class device */ @@ -314,6 +861,7 @@ static int picolcd_reset(struct hid_device *hdev) struct picolcd_data *data = hid_get_drvdata(hdev); struct hid_report *report = picolcd_out_report(REPORT_RESET, hdev); unsigned long flags; + int error; if (!data || !report || report->maxfield != 1) return -ENODEV; @@ -327,7 +875,16 @@ static int picolcd_reset(struct hid_device *hdev) usbhid_submit_report(hdev, report, USB_DIR_OUT); spin_unlock_irqrestore(&data->lock, flags); - return picolcd_check_version(hdev); + error = picolcd_check_version(hdev); + if (error) + return error; + +#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE) + if (data->fb_info) + schedule_delayed_work(&data->fb_info->deferred_work, 0); +#endif /* CONFIG_FB */ + + return 0; } /* @@ -1005,6 +1562,11 @@ static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data) if (error) goto err; + /* Set up the framebuffer device */ + error = picolcd_init_framebuffer(data); + if (error) + goto err; + #ifdef CONFIG_DEBUG_FS report = picolcd_out_report(REPORT_READ_MEMORY, hdev); if (report && report->maxfield == 1 && report->field[0]->report_size == 8) @@ -1014,6 +1576,7 @@ static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data) #endif return 0; err: + picolcd_exit_framebuffer(data); picolcd_exit_cir(data); picolcd_exit_keys(data); return error; @@ -1143,6 +1706,8 @@ static void picolcd_remove(struct hid_device *hdev) complete(&data->pending->ready); spin_unlock_irqrestore(&data->lock, flags); + /* Clean up the framebuffer */ + picolcd_exit_framebuffer(data); /* Cleanup input */ picolcd_exit_cir(data); picolcd_exit_keys(data); diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 56d06cd8075b..3e7909b0f129 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -623,6 +623,7 @@ int usbhid_wait_io(struct hid_device *hid) return 0; } +EXPORT_SYMBOL_GPL(usbhid_wait_io); static int hid_set_idle(struct usb_device *dev, int ifnum, int report, int idle) { -- cgit v1.2.2 From f1c21761408c968ed1deb8f54fd60be9471999c1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Tue, 30 Mar 2010 22:35:27 +0200 Subject: HID: add backlight support to PicoLCD device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add backlight support to PicoLCD device. Backlight support depends on backlight class and is only being compiled if backlight class has been selected. Signed-off-by: Bruno Prémont Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 2 +- drivers/hid/hid-picolcd.c | 115 +++++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 115 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index a813ea9c792d..588b9acecb7a 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -278,8 +278,8 @@ config HID_PICOLCD - Keypad - Switching between Firmware and Flash mode - Framebuffer for monochrome 256x64 display + - Backlight control (needs CONFIG_BACKLIGHT_CLASS_DEVICE) Features that are not (yet) supported: - - Backlight control - Contrast control - IR - General purpose outputs diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c index e14464789e10..0ea7a3f44bb5 100644 --- a/drivers/hid/hid-picolcd.c +++ b/drivers/hid/hid-picolcd.c @@ -26,6 +26,7 @@ #include #include +#include #include #include @@ -183,6 +184,11 @@ struct picolcd_data { struct fb_info *fb_info; struct fb_deferred_io fb_defio; #endif /* CONFIG_FB */ +#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) + struct backlight_device *backlight; + u8 lcd_brightness; + u8 lcd_power; +#endif /* CONFIG_BACKLIGHT_CLASS_DEVICE */ /* Housekeeping stuff */ spinlock_t lock; @@ -729,7 +735,7 @@ static void picolcd_exit_framebuffer(struct picolcd_data *data) kfree(fb_vbitmap); } - +#define picolcd_fbinfo(d) ((d)->fb_info) #else static inline int picolcd_fb_reset(struct picolcd_data *data, int clear) { @@ -742,8 +748,107 @@ static inline int picolcd_init_framebuffer(struct picolcd_data *data) static void picolcd_exit_framebuffer(struct picolcd_data *data) { } +#define picolcd_fbinfo(d) NULL #endif /* CONFIG_FB */ +#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) +/* + * backlight class device + */ +static int picolcd_get_brightness(struct backlight_device *bdev) +{ + struct picolcd_data *data = bl_get_data(bdev); + return data->lcd_brightness; +} + +static int picolcd_set_brightness(struct backlight_device *bdev) +{ + struct picolcd_data *data = bl_get_data(bdev); + struct hid_report *report = picolcd_out_report(REPORT_BRIGHTNESS, data->hdev); + unsigned long flags; + + if (!report || report->maxfield != 1 || report->field[0]->report_count != 1) + return -ENODEV; + + data->lcd_brightness = bdev->props.brightness & 0x0ff; + data->lcd_power = bdev->props.power; + spin_lock_irqsave(&data->lock, flags); + hid_set_field(report->field[0], 0, data->lcd_power == FB_BLANK_UNBLANK ? data->lcd_brightness : 0); + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + return 0; +} + +static int picolcd_check_bl_fb(struct backlight_device *bdev, struct fb_info *fb) +{ + return fb && fb == picolcd_fbinfo((struct picolcd_data *)bl_get_data(bdev)); +} + +static const struct backlight_ops picolcd_blops = { + .update_status = picolcd_set_brightness, + .get_brightness = picolcd_get_brightness, + .check_fb = picolcd_check_bl_fb, +}; + +static int picolcd_init_backlight(struct picolcd_data *data, struct hid_report *report) +{ + struct device *dev = &data->hdev->dev; + struct backlight_device *bdev; + struct backlight_properties props; + if (!report) + return -ENODEV; + if (report->maxfield != 1 || report->field[0]->report_count != 1 || + report->field[0]->report_size != 8) { + dev_err(dev, "unsupported BRIGHTNESS report"); + return -EINVAL; + } + + memset(&props, 0, sizeof(props)); + props.max_brightness = 0xff; + bdev = backlight_device_register(dev_name(dev), dev, data, + &picolcd_blops, &props); + if (IS_ERR(bdev)) { + dev_err(dev, "failed to register backlight\n"); + return PTR_ERR(bdev); + } + bdev->props.brightness = 0xff; + data->lcd_brightness = 0xff; + data->backlight = bdev; + picolcd_set_brightness(bdev); + return 0; +} + +static void picolcd_exit_backlight(struct picolcd_data *data) +{ + struct backlight_device *bdev = data->backlight; + + data->backlight = NULL; + if (bdev) + backlight_device_unregister(bdev); +} + +static inline int picolcd_resume_backlight(struct picolcd_data *data) +{ + if (!data->backlight) + return 0; + return picolcd_set_brightness(data->backlight); +} + +#else +static inline int picolcd_init_backlight(struct picolcd_data *data, + struct hid_report *report) +{ + return 0; +} +static inline void picolcd_exit_backlight(struct picolcd_data *data) +{ +} +static inline int picolcd_resume_backlight(struct picolcd_data *data) +{ + return 0; +} +#endif /* CONFIG_BACKLIGHT_CLASS_DEVICE */ + /* * input class device */ @@ -879,6 +984,7 @@ static int picolcd_reset(struct hid_device *hdev) if (error) return error; + picolcd_resume_backlight(data); #if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE) if (data->fb_info) schedule_delayed_work(&data->fb_info->deferred_work, 0); @@ -1567,6 +1673,11 @@ static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data) if (error) goto err; + /* Setup backlight class device */ + error = picolcd_init_backlight(data, picolcd_out_report(REPORT_BRIGHTNESS, hdev)); + if (error) + goto err; + #ifdef CONFIG_DEBUG_FS report = picolcd_out_report(REPORT_READ_MEMORY, hdev); if (report && report->maxfield == 1 && report->field[0]->report_size == 8) @@ -1576,6 +1687,7 @@ static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data) #endif return 0; err: + picolcd_exit_backlight(data); picolcd_exit_framebuffer(data); picolcd_exit_cir(data); picolcd_exit_keys(data); @@ -1707,6 +1819,7 @@ static void picolcd_remove(struct hid_device *hdev) spin_unlock_irqrestore(&data->lock, flags); /* Clean up the framebuffer */ + picolcd_exit_backlight(data); picolcd_exit_framebuffer(data); /* Cleanup input */ picolcd_exit_cir(data); -- cgit v1.2.2 From e8d931bb5977a5b36cc8e9b0fd2f26cb80a6c207 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Tue, 30 Mar 2010 22:36:07 +0200 Subject: HID: add lcd support to PicoLCD device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add lcd support to PicoLCD device. LCD support depends on lcd class and is only being compiled if lcd class has been selected. Signed-off-by: Bruno Prémont Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 2 +- drivers/hid/hid-picolcd.c | 106 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 107 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 588b9acecb7a..399edc53963e 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -279,8 +279,8 @@ config HID_PICOLCD - Switching between Firmware and Flash mode - Framebuffer for monochrome 256x64 display - Backlight control (needs CONFIG_BACKLIGHT_CLASS_DEVICE) + - Contrast control (needs CONFIG_LCD_CLASS_DEVICE) Features that are not (yet) supported: - - Contrast control - IR - General purpose outputs - EEProm / Flash access diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c index 0ea7a3f44bb5..99a488363a4e 100644 --- a/drivers/hid/hid-picolcd.c +++ b/drivers/hid/hid-picolcd.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -184,6 +185,10 @@ struct picolcd_data { struct fb_info *fb_info; struct fb_deferred_io fb_defio; #endif /* CONFIG_FB */ +#if defined(CONFIG_LCD_CLASS_DEVICE) || defined(CONFIG_LCD_CLASS_DEVICE_MODULE) + struct lcd_device *lcd; + u8 lcd_contrast; +#endif #if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) struct backlight_device *backlight; u8 lcd_brightness; @@ -849,6 +854,99 @@ static inline int picolcd_resume_backlight(struct picolcd_data *data) } #endif /* CONFIG_BACKLIGHT_CLASS_DEVICE */ +#if defined(CONFIG_LCD_CLASS_DEVICE) || defined(CONFIG_LCD_CLASS_DEVICE_MODULE) +/* + * lcd class device + */ +static int picolcd_get_contrast(struct lcd_device *ldev) +{ + struct picolcd_data *data = lcd_get_data(ldev); + return data->lcd_contrast; +} + +static int picolcd_set_contrast(struct lcd_device *ldev, int contrast) +{ + struct picolcd_data *data = lcd_get_data(ldev); + struct hid_report *report = picolcd_out_report(REPORT_CONTRAST, data->hdev); + unsigned long flags; + + if (!report || report->maxfield != 1 || report->field[0]->report_count != 1) + return -ENODEV; + + data->lcd_contrast = contrast & 0x0ff; + spin_lock_irqsave(&data->lock, flags); + hid_set_field(report->field[0], 0, data->lcd_contrast); + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + return 0; +} + +static int picolcd_check_lcd_fb(struct lcd_device *ldev, struct fb_info *fb) +{ + return fb && fb == picolcd_fbinfo((struct picolcd_data *)lcd_get_data(ldev)); +} + +static struct lcd_ops picolcd_lcdops = { + .get_contrast = picolcd_get_contrast, + .set_contrast = picolcd_set_contrast, + .check_fb = picolcd_check_lcd_fb, +}; + +static int picolcd_init_lcd(struct picolcd_data *data, struct hid_report *report) +{ + struct device *dev = &data->hdev->dev; + struct lcd_device *ldev; + + if (!report) + return -ENODEV; + if (report->maxfield != 1 || report->field[0]->report_count != 1 || + report->field[0]->report_size != 8) { + dev_err(dev, "unsupported CONTRAST report"); + return -EINVAL; + } + + ldev = lcd_device_register(dev_name(dev), dev, data, &picolcd_lcdops); + if (IS_ERR(ldev)) { + dev_err(dev, "failed to register LCD\n"); + return PTR_ERR(ldev); + } + ldev->props.max_contrast = 0x0ff; + data->lcd_contrast = 0xe5; + data->lcd = ldev; + picolcd_set_contrast(ldev, 0xe5); + return 0; +} + +static void picolcd_exit_lcd(struct picolcd_data *data) +{ + struct lcd_device *ldev = data->lcd; + + data->lcd = NULL; + if (ldev) + lcd_device_unregister(ldev); +} + +static inline int picolcd_resume_lcd(struct picolcd_data *data) +{ + if (!data->lcd) + return 0; + return picolcd_set_contrast(data->lcd, data->lcd_contrast); +} +#else +static inline int picolcd_init_lcd(struct picolcd_data *data, + struct hid_report *report) +{ + return 0; +} +static inline void picolcd_exit_lcd(struct picolcd_data *data) +{ +} +static inline int picolcd_resume_lcd(struct picolcd_data *data) +{ + return 0; +} +#endif /* CONFIG_LCD_CLASS_DEVICE */ + /* * input class device */ @@ -984,6 +1082,7 @@ static int picolcd_reset(struct hid_device *hdev) if (error) return error; + picolcd_resume_lcd(data); picolcd_resume_backlight(data); #if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE) if (data->fb_info) @@ -1673,6 +1772,11 @@ static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data) if (error) goto err; + /* Setup lcd class device */ + error = picolcd_init_lcd(data, picolcd_out_report(REPORT_CONTRAST, hdev)); + if (error) + goto err; + /* Setup backlight class device */ error = picolcd_init_backlight(data, picolcd_out_report(REPORT_BRIGHTNESS, hdev)); if (error) @@ -1688,6 +1792,7 @@ static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data) return 0; err: picolcd_exit_backlight(data); + picolcd_exit_lcd(data); picolcd_exit_framebuffer(data); picolcd_exit_cir(data); picolcd_exit_keys(data); @@ -1820,6 +1925,7 @@ static void picolcd_remove(struct hid_device *hdev) /* Clean up the framebuffer */ picolcd_exit_backlight(data); + picolcd_exit_lcd(data); picolcd_exit_framebuffer(data); /* Cleanup input */ picolcd_exit_cir(data); -- cgit v1.2.2 From 467d6523065187d4c081b078755da4103d7ffacb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Tue, 30 Mar 2010 22:36:49 +0200 Subject: HID: add GPO (leds) support to PicoLCD device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add leds support to PicoLCD device to drive the GPO pins. GPO support depends on leds class and is only being compiled if leds class has been selected. Signed-off-by: Bruno Prémont Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 6 +- drivers/hid/hid-picolcd.c | 163 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 166 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 399edc53963e..34f6593ea3b6 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -278,11 +278,11 @@ config HID_PICOLCD - Keypad - Switching between Firmware and Flash mode - Framebuffer for monochrome 256x64 display - - Backlight control (needs CONFIG_BACKLIGHT_CLASS_DEVICE) - - Contrast control (needs CONFIG_LCD_CLASS_DEVICE) + - Backlight control (needs CONFIG_BACKLIGHT_CLASS_DEVICE) + - Contrast control (needs CONFIG_LCD_CLASS_DEVICE) + - General purpose outputs (needs CONFIG_LEDS_CLASS) Features that are not (yet) supported: - IR - - General purpose outputs - EEProm / Flash access config HID_QUANTA diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c index 99a488363a4e..517677305ef9 100644 --- a/drivers/hid/hid-picolcd.c +++ b/drivers/hid/hid-picolcd.c @@ -29,6 +29,8 @@ #include #include +#include + #include #include @@ -194,6 +196,11 @@ struct picolcd_data { u8 lcd_brightness; u8 lcd_power; #endif /* CONFIG_BACKLIGHT_CLASS_DEVICE */ +#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) + /* LED stuff */ + u8 led_state; + struct led_classdev *led[8]; +#endif /* CONFIG_LEDS_CLASS */ /* Housekeeping stuff */ spinlock_t lock; @@ -947,6 +954,153 @@ static inline int picolcd_resume_lcd(struct picolcd_data *data) } #endif /* CONFIG_LCD_CLASS_DEVICE */ +#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) +/** + * LED class device + */ +static void picolcd_leds_set(struct picolcd_data *data) +{ + struct hid_report *report; + unsigned long flags; + + if (!data->led[0]) + return; + report = picolcd_out_report(REPORT_LED_STATE, data->hdev); + if (!report || report->maxfield != 1 || report->field[0]->report_count != 1) + return; + + spin_lock_irqsave(&data->lock, flags); + hid_set_field(report->field[0], 0, data->led_state); + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); +} + +static void picolcd_led_set_brightness(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct device *dev; + struct hid_device *hdev; + struct picolcd_data *data; + int i, state = 0; + + dev = led_cdev->dev->parent; + hdev = container_of(dev, struct hid_device, dev); + data = hid_get_drvdata(hdev); + for (i = 0; i < 8; i++) { + if (led_cdev != data->led[i]) + continue; + state = (data->led_state >> i) & 1; + if (value == LED_OFF && state) { + data->led_state &= ~(1 << i); + picolcd_leds_set(data); + } else if (value != LED_OFF && !state) { + data->led_state |= 1 << i; + picolcd_leds_set(data); + } + break; + } +} + +static enum led_brightness picolcd_led_get_brightness(struct led_classdev *led_cdev) +{ + struct device *dev; + struct hid_device *hdev; + struct picolcd_data *data; + int i, value = 0; + + dev = led_cdev->dev->parent; + hdev = container_of(dev, struct hid_device, dev); + data = hid_get_drvdata(hdev); + for (i = 0; i < 8; i++) + if (led_cdev == data->led[i]) { + value = (data->led_state >> i) & 1; + break; + } + return value ? LED_FULL : LED_OFF; +} + +static int picolcd_init_leds(struct picolcd_data *data, struct hid_report *report) +{ + struct device *dev = &data->hdev->dev; + struct led_classdev *led; + size_t name_sz = strlen(dev_name(dev)) + 8; + char *name; + int i, ret = 0; + + if (!report) + return -ENODEV; + if (report->maxfield != 1 || report->field[0]->report_count != 1 || + report->field[0]->report_size != 8) { + dev_err(dev, "unsupported LED_STATE report"); + return -EINVAL; + } + + for (i = 0; i < 8; i++) { + led = kzalloc(sizeof(struct led_classdev)+name_sz, GFP_KERNEL); + if (!led) { + dev_err(dev, "can't allocate memory for LED %d\n", i); + ret = -ENOMEM; + goto err; + } + name = (void *)(&led[1]); + snprintf(name, name_sz, "%s::GPO%d", dev_name(dev), i); + led->name = name; + led->brightness = 0; + led->max_brightness = 1; + led->brightness_get = picolcd_led_get_brightness; + led->brightness_set = picolcd_led_set_brightness; + + data->led[i] = led; + ret = led_classdev_register(dev, data->led[i]); + if (ret) { + data->led[i] = NULL; + kfree(led); + dev_err(dev, "can't register LED %d\n", i); + goto err; + } + } + return 0; +err: + for (i = 0; i < 8; i++) + if (data->led[i]) { + led = data->led[i]; + data->led[i] = NULL; + led_classdev_unregister(led); + kfree(led); + } + return ret; +} + +static void picolcd_exit_leds(struct picolcd_data *data) +{ + struct led_classdev *led; + int i; + + for (i = 0; i < 8; i++) { + led = data->led[i]; + data->led[i] = NULL; + if (!led) + continue; + led_classdev_unregister(led); + kfree(led); + } +} + +#else +static inline int picolcd_init_leds(struct picolcd_data *data, + struct hid_report *report) +{ + return 0; +} +static void picolcd_exit_leds(struct picolcd_data *data) +{ +} +static inline int picolcd_leds_set(struct picolcd_data *data) +{ + return 0; +} +#endif /* CONFIG_LEDS_CLASS */ + /* * input class device */ @@ -1089,6 +1243,7 @@ static int picolcd_reset(struct hid_device *hdev) schedule_delayed_work(&data->fb_info->deferred_work, 0); #endif /* CONFIG_FB */ + picolcd_leds_set(data); return 0; } @@ -1782,6 +1937,11 @@ static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data) if (error) goto err; + /* Setup the LED class devices */ + error = picolcd_init_leds(data, picolcd_out_report(REPORT_LED_STATE, hdev)); + if (error) + goto err; + #ifdef CONFIG_DEBUG_FS report = picolcd_out_report(REPORT_READ_MEMORY, hdev); if (report && report->maxfield == 1 && report->field[0]->report_size == 8) @@ -1791,6 +1951,7 @@ static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data) #endif return 0; err: + picolcd_exit_leds(data); picolcd_exit_backlight(data); picolcd_exit_lcd(data); picolcd_exit_framebuffer(data); @@ -1923,6 +2084,8 @@ static void picolcd_remove(struct hid_device *hdev) complete(&data->pending->ready); spin_unlock_irqrestore(&data->lock, flags); + /* Cleanup LED */ + picolcd_exit_leds(data); /* Clean up the framebuffer */ picolcd_exit_backlight(data); picolcd_exit_lcd(data); -- cgit v1.2.2 From 9bbf2b98ba11d00bd73e3254e15cfe17ccaff6ba Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Tue, 30 Mar 2010 22:38:09 +0200 Subject: HID: add experimental access to PicoLCD device's EEPROM and FLASH MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The PicoLCD device has a small amount of EEPROM and also provides access to its FLASH where firmware and splash image are saved. In flasher mode FLASH access is the only active feature. Give read/write access to both via debugfs files. NOTE: EEPROM and FLASH access should be switched to better suited API, until then the will reside in debugfs Signed-off-by: Bruno Prémont Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 2 +- drivers/hid/hid-picolcd.c | 439 ++++++++++++++++++++++++++++++++++++++++++++-- 2 files changed, 423 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 34f6593ea3b6..a2ecd83bfe89 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -281,9 +281,9 @@ config HID_PICOLCD - Backlight control (needs CONFIG_BACKLIGHT_CLASS_DEVICE) - Contrast control (needs CONFIG_LCD_CLASS_DEVICE) - General purpose outputs (needs CONFIG_LEDS_CLASS) + - EEProm / Flash access (via debugfs) Features that are not (yet) supported: - IR - - EEProm / Flash access config HID_QUANTA tristate "Quanta Optical Touch" diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c index 517677305ef9..66f9cfd41abe 100644 --- a/drivers/hid/hid-picolcd.c +++ b/drivers/hid/hid-picolcd.c @@ -169,6 +169,10 @@ struct picolcd_pending { struct picolcd_data { struct hid_device *hdev; #ifdef CONFIG_DEBUG_FS + struct dentry *debug_reset; + struct dentry *debug_eeprom; + struct dentry *debug_flash; + struct mutex mutex_flash; int addr_sz; #endif u8 version[2]; @@ -1313,6 +1317,357 @@ static DEVICE_ATTR(operation_mode, 0644, picolcd_operation_mode_show, #ifdef CONFIG_DEBUG_FS +/* + * The "reset" file + */ +static int picolcd_debug_reset_show(struct seq_file *f, void *p) +{ + if (picolcd_fbinfo((struct picolcd_data *)f->private)) + seq_printf(f, "all fb\n"); + else + seq_printf(f, "all\n"); + return 0; +} + +static int picolcd_debug_reset_open(struct inode *inode, struct file *f) +{ + return single_open(f, picolcd_debug_reset_show, inode->i_private); +} + +static ssize_t picolcd_debug_reset_write(struct file *f, const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct picolcd_data *data = ((struct seq_file *)f->private_data)->private; + char buf[32]; + size_t cnt = min(count, sizeof(buf)-1); + if (copy_from_user(buf, user_buf, cnt)) + return -EFAULT; + + while (cnt > 0 && (buf[cnt-1] == ' ' || buf[cnt-1] == '\n')) + cnt--; + buf[cnt] = '\0'; + if (strcmp(buf, "all") == 0) { + picolcd_reset(data->hdev); + picolcd_fb_reset(data, 1); + } else if (strcmp(buf, "fb") == 0) { + picolcd_fb_reset(data, 1); + } else { + return -EINVAL; + } + return count; +} + +static const struct file_operations picolcd_debug_reset_fops = { + .owner = THIS_MODULE, + .open = picolcd_debug_reset_open, + .read = seq_read, + .llseek = seq_lseek, + .write = picolcd_debug_reset_write, + .release = single_release, +}; + +/* + * The "eeprom" file + */ +static int picolcd_debug_eeprom_open(struct inode *i, struct file *f) +{ + f->private_data = i->i_private; + return 0; +} + +static ssize_t picolcd_debug_eeprom_read(struct file *f, char __user *u, + size_t s, loff_t *off) +{ + struct picolcd_data *data = f->private_data; + struct picolcd_pending *resp; + u8 raw_data[3]; + ssize_t ret = -EIO; + + if (s == 0) + return -EINVAL; + if (*off > 0x0ff) + return 0; + + /* prepare buffer with info about what we want to read (addr & len) */ + raw_data[0] = *off & 0xff; + raw_data[1] = (*off >> 8) && 0xff; + raw_data[2] = s < 20 ? s : 20; + if (*off + raw_data[2] > 0xff) + raw_data[2] = 0x100 - *off; + resp = picolcd_send_and_wait(data->hdev, REPORT_EE_READ, raw_data, + sizeof(raw_data)); + if (!resp) + return -EIO; + + if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) { + /* successful read :) */ + ret = resp->raw_data[2]; + if (ret > s) + ret = s; + if (copy_to_user(u, resp->raw_data+3, ret)) + ret = -EFAULT; + else + *off += ret; + } /* anything else is some kind of IO error */ + + kfree(resp); + return ret; +} + +static ssize_t picolcd_debug_eeprom_write(struct file *f, const char __user *u, + size_t s, loff_t *off) +{ + struct picolcd_data *data = f->private_data; + struct picolcd_pending *resp; + ssize_t ret = -EIO; + u8 raw_data[23]; + + if (s == 0) + return -EINVAL; + if (*off > 0x0ff) + return -ENOSPC; + + memset(raw_data, 0, sizeof(raw_data)); + raw_data[0] = *off & 0xff; + raw_data[1] = (*off >> 8) && 0xff; + raw_data[2] = s < 20 ? s : 20; + if (*off + raw_data[2] > 0xff) + raw_data[2] = 0x100 - *off; + + if (copy_from_user(raw_data+3, u, raw_data[2])) + return -EFAULT; + resp = picolcd_send_and_wait(data->hdev, REPORT_EE_WRITE, raw_data, + sizeof(raw_data)); + + if (!resp) + return -EIO; + + if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) { + /* check if written data matches */ + if (memcmp(raw_data, resp->raw_data, 3+raw_data[2]) == 0) { + *off += raw_data[2]; + ret = raw_data[2]; + } + } + kfree(resp); + return ret; +} + +/* + * Notes: + * - read/write happens in chunks of at most 20 bytes, it's up to userspace + * to loop in order to get more data. + * - on write errors on otherwise correct write request the bytes + * that should have been written are in undefined state. + */ +static const struct file_operations picolcd_debug_eeprom_fops = { + .owner = THIS_MODULE, + .open = picolcd_debug_eeprom_open, + .read = picolcd_debug_eeprom_read, + .write = picolcd_debug_eeprom_write, + .llseek = generic_file_llseek, +}; + +/* + * The "flash" file + */ +static int picolcd_debug_flash_open(struct inode *i, struct file *f) +{ + f->private_data = i->i_private; + return 0; +} + +/* record a flash address to buf (bounds check to be done by caller) */ +static int _picolcd_flash_setaddr(struct picolcd_data *data, u8 *buf, long off) +{ + buf[0] = off & 0xff; + buf[1] = (off >> 8) & 0xff; + if (data->addr_sz == 3) + buf[2] = (off >> 16) & 0xff; + return data->addr_sz == 2 ? 2 : 3; +} + +/* read a given size of data (bounds check to be done by caller) */ +static ssize_t _picolcd_flash_read(struct picolcd_data *data, int report_id, + char __user *u, size_t s, loff_t *off) +{ + struct picolcd_pending *resp; + u8 raw_data[4]; + ssize_t ret = 0; + int len_off, err = -EIO; + + while (s > 0) { + err = -EIO; + len_off = _picolcd_flash_setaddr(data, raw_data, *off); + raw_data[len_off] = s > 32 ? 32 : s; + resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off+1); + if (!resp || !resp->in_report) + goto skip; + if (resp->in_report->id == REPORT_MEMORY || + resp->in_report->id == REPORT_BL_READ_MEMORY) { + if (memcmp(raw_data, resp->raw_data, len_off+1) != 0) + goto skip; + if (copy_to_user(u+ret, resp->raw_data+len_off+1, raw_data[len_off])) { + err = -EFAULT; + goto skip; + } + *off += raw_data[len_off]; + s -= raw_data[len_off]; + ret += raw_data[len_off]; + err = 0; + } +skip: + kfree(resp); + if (err) + return ret > 0 ? ret : err; + } + return ret; +} + +static ssize_t picolcd_debug_flash_read(struct file *f, char __user *u, + size_t s, loff_t *off) +{ + struct picolcd_data *data = f->private_data; + + if (s == 0) + return -EINVAL; + if (*off > 0x05fff) + return 0; + if (*off + s > 0x05fff) + s = 0x06000 - *off; + + if (data->status & PICOLCD_BOOTLOADER) + return _picolcd_flash_read(data, REPORT_BL_READ_MEMORY, u, s, off); + else + return _picolcd_flash_read(data, REPORT_READ_MEMORY, u, s, off); +} + +/* erase block aligned to 64bytes boundary */ +static ssize_t _picolcd_flash_erase64(struct picolcd_data *data, int report_id, + loff_t *off) +{ + struct picolcd_pending *resp; + u8 raw_data[3]; + int len_off; + ssize_t ret = -EIO; + + if (*off & 0x3f) + return -EINVAL; + + len_off = _picolcd_flash_setaddr(data, raw_data, *off); + resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off); + if (!resp || !resp->in_report) + goto skip; + if (resp->in_report->id == REPORT_MEMORY || + resp->in_report->id == REPORT_BL_ERASE_MEMORY) { + if (memcmp(raw_data, resp->raw_data, len_off) != 0) + goto skip; + ret = 0; + } +skip: + kfree(resp); + return ret; +} + +/* write a given size of data (bounds check to be done by caller) */ +static ssize_t _picolcd_flash_write(struct picolcd_data *data, int report_id, + const char __user *u, size_t s, loff_t *off) +{ + struct picolcd_pending *resp; + u8 raw_data[36]; + ssize_t ret = 0; + int len_off, err = -EIO; + + while (s > 0) { + err = -EIO; + len_off = _picolcd_flash_setaddr(data, raw_data, *off); + raw_data[len_off] = s > 32 ? 32 : s; + if (copy_from_user(raw_data+len_off+1, u, raw_data[len_off])) { + err = -EFAULT; + goto skip; + } + resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, + len_off+1+raw_data[len_off]); + if (!resp || !resp->in_report) + goto skip; + if (resp->in_report->id == REPORT_MEMORY || + resp->in_report->id == REPORT_BL_WRITE_MEMORY) { + if (memcmp(raw_data, resp->raw_data, len_off+1+raw_data[len_off]) != 0) + goto skip; + *off += raw_data[len_off]; + s -= raw_data[len_off]; + ret += raw_data[len_off]; + err = 0; + } +skip: + kfree(resp); + if (err) + break; + } + return ret > 0 ? ret : err; +} + +static ssize_t picolcd_debug_flash_write(struct file *f, const char __user *u, + size_t s, loff_t *off) +{ + struct picolcd_data *data = f->private_data; + ssize_t err, ret = 0; + int report_erase, report_write; + + if (s == 0) + return -EINVAL; + if (*off > 0x5fff) + return -ENOSPC; + if (s & 0x3f) + return -EINVAL; + if (*off & 0x3f) + return -EINVAL; + + if (data->status & PICOLCD_BOOTLOADER) { + report_erase = REPORT_BL_ERASE_MEMORY; + report_write = REPORT_BL_WRITE_MEMORY; + } else { + report_erase = REPORT_ERASE_MEMORY; + report_write = REPORT_WRITE_MEMORY; + } + mutex_lock(&data->mutex_flash); + while (s > 0) { + err = _picolcd_flash_erase64(data, report_erase, off); + if (err) + break; + err = _picolcd_flash_write(data, report_write, u, 64, off); + if (err < 0) + break; + ret += err; + *off += err; + s -= err; + if (err != 64) + break; + } + mutex_unlock(&data->mutex_flash); + return ret > 0 ? ret : err; +} + +/* + * Notes: + * - concurrent writing is prevented by mutex and all writes must be + * n*64 bytes and 64-byte aligned, each write being preceeded by an + * ERASE which erases a 64byte block. + * If less than requested was written or an error is returned for an + * otherwise correct write request the next 64-byte block which should + * have been written is in undefined state (mostly: original, erased, + * (half-)written with write error) + * - reading can happend without special restriction + */ +static const struct file_operations picolcd_debug_flash_fops = { + .owner = THIS_MODULE, + .open = picolcd_debug_flash_open, + .read = picolcd_debug_flash_read, + .write = picolcd_debug_flash_write, + .llseek = generic_file_llseek, +}; + + /* * Helper code for HID report level dumping/debugging */ @@ -1788,9 +2143,66 @@ static void picolcd_debug_raw_event(struct picolcd_data *data, wake_up_interruptible(&hdev->debug_wait); kfree(buff); } + +static void picolcd_init_devfs(struct picolcd_data *data, + struct hid_report *eeprom_r, struct hid_report *eeprom_w, + struct hid_report *flash_r, struct hid_report *flash_w, + struct hid_report *reset) +{ + struct hid_device *hdev = data->hdev; + + mutex_init(&data->mutex_flash); + + /* reset */ + if (reset) + data->debug_reset = debugfs_create_file("reset", 0600, + hdev->debug_dir, data, &picolcd_debug_reset_fops); + + /* eeprom */ + if (eeprom_r || eeprom_w) + data->debug_eeprom = debugfs_create_file("eeprom", + (eeprom_w ? S_IWUSR : 0) | (eeprom_r ? S_IRUSR : 0), + hdev->debug_dir, data, &picolcd_debug_eeprom_fops); + + /* flash */ + if (flash_r && flash_r->maxfield == 1 && flash_r->field[0]->report_size == 8) + data->addr_sz = flash_r->field[0]->report_count - 1; + else + data->addr_sz = -1; + if (data->addr_sz == 2 || data->addr_sz == 3) { + data->debug_flash = debugfs_create_file("flash", + (flash_w ? S_IWUSR : 0) | (flash_r ? S_IRUSR : 0), + hdev->debug_dir, data, &picolcd_debug_flash_fops); + } else if (flash_r || flash_w) + dev_warn(&hdev->dev, "Unexpected FLASH access reports, " + "please submit rdesc for review\n"); +} + +static void picolcd_exit_devfs(struct picolcd_data *data) +{ + struct dentry *dent; + + dent = data->debug_reset; + data->debug_reset = NULL; + if (dent) + debugfs_remove(dent); + dent = data->debug_eeprom; + data->debug_eeprom = NULL; + if (dent) + debugfs_remove(dent); + dent = data->debug_flash; + data->debug_flash = NULL; + if (dent) + debugfs_remove(dent); + mutex_destroy(&data->mutex_flash); +} #else #define picolcd_debug_raw_event(data, hdev, report, raw_data, size) -#endif +#define picolcd_init_devfs(data, eeprom_r, eeprom_w, flash_r, flash_w, reset) +static void picolcd_exit_devfs(struct picolcd_data *data) +{ +} +#endif /* CONFIG_DEBUG_FS */ /* * Handle raw report as sent by device @@ -1900,7 +2312,6 @@ static inline void picolcd_exit_cir(struct picolcd_data *data) static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data) { - struct hid_report *report; int error; error = picolcd_check_version(hdev); @@ -1942,13 +2353,11 @@ static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data) if (error) goto err; -#ifdef CONFIG_DEBUG_FS - report = picolcd_out_report(REPORT_READ_MEMORY, hdev); - if (report && report->maxfield == 1 && report->field[0]->report_size == 8) - data->addr_sz = report->field[0]->report_count - 1; - else - data->addr_sz = -1; -#endif + picolcd_init_devfs(data, picolcd_out_report(REPORT_EE_READ, hdev), + picolcd_out_report(REPORT_EE_WRITE, hdev), + picolcd_out_report(REPORT_READ_MEMORY, hdev), + picolcd_out_report(REPORT_WRITE_MEMORY, hdev), + picolcd_out_report(REPORT_RESET, hdev)); return 0; err: picolcd_exit_leds(data); @@ -1962,7 +2371,6 @@ err: static int picolcd_probe_bootloader(struct hid_device *hdev, struct picolcd_data *data) { - struct hid_report *report; int error; error = picolcd_check_version(hdev); @@ -1974,13 +2382,9 @@ static int picolcd_probe_bootloader(struct hid_device *hdev, struct picolcd_data "please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n", dev_name(&hdev->dev)); -#ifdef CONFIG_DEBUG_FS - report = picolcd_out_report(REPORT_BL_READ_MEMORY, hdev); - if (report && report->maxfield == 1 && report->field[0]->report_size == 8) - data->addr_sz = report->field[0]->report_count - 1; - else - data->addr_sz = -1; -#endif + picolcd_init_devfs(data, NULL, NULL, + picolcd_out_report(REPORT_BL_READ_MEMORY, hdev), + picolcd_out_report(REPORT_BL_WRITE_MEMORY, hdev), NULL); return 0; } @@ -2073,6 +2477,7 @@ static void picolcd_remove(struct hid_device *hdev) data->status |= PICOLCD_FAILED; spin_unlock_irqrestore(&data->lock, flags); + picolcd_exit_devfs(data); device_remove_file(&hdev->dev, &dev_attr_operation_mode); hdev->ll_driver->close(hdev); hid_hw_stop(hdev); -- cgit v1.2.2 From eb741103f17a19fccf7c795ed1d9662196acc6e5 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 1 Apr 2010 08:24:42 +0200 Subject: HID: picolcd: fix build failure Using copy_{to,from}_user requires the include of linux/uaccess.h. Reported-by: Stephen Rothwell Signed-off-by: Jiri Kosina --- drivers/hid/hid-picolcd.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c index 66f9cfd41abe..0eacc6b6d5bb 100644 --- a/drivers/hid/hid-picolcd.c +++ b/drivers/hid/hid-picolcd.c @@ -35,6 +35,7 @@ #include #include +#include #define PICOLCD_NAME "PicoLCD (graphic)" -- cgit v1.2.2 From 3d61510f4ecacfe47c75c0eb51c0659dfa77fb1b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 2 Apr 2010 13:21:58 -0400 Subject: HID: usbhid: enable remote wakeup for keyboards This patch (as1365) enables remote wakeup by default for USB keyboard devices. Keyboards in general are supposed to be wakeup devices, but the correct place to enable it depends on the device's bus; no single approach will work for all keyboard devices. In particular, this covers only USB keyboards (and then only those supporting the boot protocol). Signed-off-by: Alan Stern Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hid-core.c | 7 +++++-- drivers/hid/usbhid/usbkbd.c | 1 + 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 56d06cd8075b..9cd61a52e9e3 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -1026,12 +1026,15 @@ static int usbhid_start(struct hid_device *hid) /* Some keyboards don't work until their LEDs have been set. * Since BIOSes do set the LEDs, it must be safe for any device * that supports the keyboard boot protocol. + * In addition, enable remote wakeup by default for all keyboard + * devices supporting the boot protocol. */ if (interface->desc.bInterfaceSubClass == USB_INTERFACE_SUBCLASS_BOOT && interface->desc.bInterfaceProtocol == - USB_INTERFACE_PROTOCOL_KEYBOARD) + USB_INTERFACE_PROTOCOL_KEYBOARD) { usbhid_set_leds(hid); - + device_set_wakeup_enable(&dev->dev, 1); + } return 0; fail: diff --git a/drivers/hid/usbhid/usbkbd.c b/drivers/hid/usbhid/usbkbd.c index f843443ba5c3..b2fd0b00de92 100644 --- a/drivers/hid/usbhid/usbkbd.c +++ b/drivers/hid/usbhid/usbkbd.c @@ -313,6 +313,7 @@ static int usb_kbd_probe(struct usb_interface *iface, goto fail2; usb_set_intfdata(iface, kbd); + device_set_wakeup_enable(&dev->dev, 1); return 0; fail2: -- cgit v1.2.2 From 0c3910c255d3f9caeef4ebad5d5a1156a2d33f69 Mon Sep 17 00:00:00 2001 From: Stephane Chatty Date: Sat, 10 Apr 2010 16:43:08 +0200 Subject: HID: add support for the eGalax dual-touch panel Added support for the eGalax dual-touch panel, found on the Asus EeePC T101MT Signed-off-by: Stephane Chatty Tested-by: Philipp Merkel Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 6 + drivers/hid/Makefile | 1 + drivers/hid/hid-core.c | 1 + drivers/hid/hid-egalax.c | 280 +++++++++++++++++++++++++++++++++++++++++++++++ drivers/hid/hid-ids.h | 3 + 5 files changed, 291 insertions(+) create mode 100644 drivers/hid/hid-egalax.c (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 71d4c0703629..dabf3b67f489 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -122,6 +122,12 @@ config DRAGONRISE_FF Say Y here if you want to enable force feedback support for DragonRise Inc. game controllers. +config HID_EGALAX + tristate "eGalax multi-touch panel" + depends on USB_HID + ---help--- + Support for the eGalax dual-touch panel + config HID_EZKEY tristate "Ezkey" if EMBEDDED depends on USB_HID diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index 0b2618f092ca..19dae07eb14a 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_HID_CHERRY) += hid-cherry.o obj-$(CONFIG_HID_CHICONY) += hid-chicony.o obj-$(CONFIG_HID_CYPRESS) += hid-cypress.o obj-$(CONFIG_HID_DRAGONRISE) += hid-drff.o +obj-$(CONFIG_HID_EGALAX) += hid-egalax.o obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o obj-$(CONFIG_HID_GYRATION) += hid-gyration.o obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 2e2aa759d230..0bbf59493876 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1302,6 +1302,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_3) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) }, + { HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) }, { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) }, diff --git a/drivers/hid/hid-egalax.c b/drivers/hid/hid-egalax.c new file mode 100644 index 000000000000..8b48d5a07179 --- /dev/null +++ b/drivers/hid/hid-egalax.c @@ -0,0 +1,280 @@ +/* + * HID driver for eGalax dual-touch panels + * + * Copyright (c) 2010 Stephane Chatty + * + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include +#include +#include +#include +#include "usbhid/usbhid.h" + +MODULE_AUTHOR("Stephane Chatty "); +MODULE_DESCRIPTION("eGalax dual-touch panel"); +MODULE_LICENSE("GPL"); + +#include "hid-ids.h" + +struct egalax_data { + __u16 x, y, z; + __u8 id; + bool first; /* is this the first finger in the frame? */ + bool valid; /* valid finger data, or just placeholder? */ + bool activity; /* at least one active finger previously? */ + __u16 lastx, lasty; /* latest valid (x, y) in the frame */ +}; + +static int egalax_input_mapping(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + switch (usage->hid & HID_USAGE_PAGE) { + + case HID_UP_GENDESK: + switch (usage->hid) { + case HID_GD_X: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_POSITION_X); + /* touchscreen emulation */ + input_set_abs_params(hi->input, ABS_X, + field->logical_minimum, + field->logical_maximum, 0, 0); + return 1; + case HID_GD_Y: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_POSITION_Y); + /* touchscreen emulation */ + input_set_abs_params(hi->input, ABS_Y, + field->logical_minimum, + field->logical_maximum, 0, 0); + return 1; + } + return 0; + + case HID_UP_DIGITIZER: + switch (usage->hid) { + case HID_DG_TIPSWITCH: + /* touchscreen emulation */ + hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH); + return 1; + case HID_DG_INRANGE: + case HID_DG_CONFIDENCE: + case HID_DG_CONTACTCOUNT: + case HID_DG_CONTACTMAX: + return -1; + case HID_DG_CONTACTID: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_TRACKING_ID); + return 1; + case HID_DG_TIPPRESSURE: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_PRESSURE); + return 1; + } + return 0; + } + + /* ignore others (from other reports we won't get anyway) */ + return -1; +} + +static int egalax_input_mapped(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + if (usage->type == EV_KEY || usage->type == EV_ABS) + clear_bit(usage->code, *bit); + + return 0; +} + +/* + * this function is called when a whole finger has been parsed, + * so that it can decide what to send to the input layer. + */ +static void egalax_filter_event(struct egalax_data *td, struct input_dev *input) +{ + td->first = !td->first; /* touchscreen emulation */ + + if (td->valid) { + /* emit multitouch events */ + input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id); + input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x); + input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y); + input_event(input, EV_ABS, ABS_MT_PRESSURE, td->z); + + input_mt_sync(input); + + /* + * touchscreen emulation: store (x, y) as + * the last valid values in this frame + */ + td->lastx = td->x; + td->lasty = td->y; + } + + /* + * touchscreen emulation: if this is the second finger and at least + * one in this frame is valid, the latest valid in the frame is + * the oldest on the panel, the one we want for single touch + */ + if (!td->first && td->activity) { + input_event(input, EV_ABS, ABS_X, td->lastx); + input_event(input, EV_ABS, ABS_Y, td->lasty); + } + + if (!td->valid) { + /* + * touchscreen emulation: if the first finger is invalid + * and there previously was finger activity, this is a release + */ + if (td->first && td->activity) { + input_event(input, EV_KEY, BTN_TOUCH, 0); + td->activity = false; + } + return; + } + + + /* touchscreen emulation: if no previous activity, emit touch event */ + if (!td->activity) { + input_event(input, EV_KEY, BTN_TOUCH, 1); + td->activity = true; + } +} + + +static int egalax_event(struct hid_device *hid, struct hid_field *field, + struct hid_usage *usage, __s32 value) +{ + struct egalax_data *td = hid_get_drvdata(hid); + + if (hid->claimed & HID_CLAIMED_INPUT) { + struct input_dev *input = field->hidinput->input; + + switch (usage->hid) { + case HID_DG_INRANGE: + case HID_DG_CONFIDENCE: + /* avoid interference from generic hidinput handling */ + break; + case HID_DG_TIPSWITCH: + td->valid = value; + break; + case HID_DG_TIPPRESSURE: + td->z = value; + break; + case HID_DG_CONTACTID: + td->id = value; + break; + case HID_GD_X: + td->x = value; + break; + case HID_GD_Y: + td->y = value; + /* this is the last field in a finger */ + egalax_filter_event(td, input); + break; + case HID_DG_CONTACTCOUNT: + /* touch emulation: this is the last field in a frame */ + td->first = false; + break; + + default: + /* fallback to the generic hidinput handling */ + return 0; + } + } + + /* we have handled the hidinput part, now remains hiddev */ + if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event) + hid->hiddev_hid_event(hid, field, usage, value); + + return 1; +} + +static int egalax_probe(struct hid_device *hdev, const struct hid_device_id *id) +{ + int ret; + struct egalax_data *td; + struct hid_report *report; + + td = kmalloc(sizeof(struct egalax_data), GFP_KERNEL); + if (!td) { + dev_err(&hdev->dev, "cannot allocate eGalax data\n"); + return -ENOMEM; + } + hid_set_drvdata(hdev, td); + + ret = hid_parse(hdev); + if (ret) + goto end; + + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + if (ret) + goto end; + + report = hdev->report_enum[HID_FEATURE_REPORT].report_id_hash[5]; + if (report) { + report->field[0]->value[0] = 2; + usbhid_submit_report(hdev, report, USB_DIR_OUT); + } + +end: + if (ret) + kfree(td); + + return ret; +} + +static void egalax_remove(struct hid_device *hdev) +{ + hid_hw_stop(hdev); + kfree(hid_get_drvdata(hdev)); + hid_set_drvdata(hdev, NULL); +} + +static const struct hid_device_id egalax_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_DWAV, + USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) }, + { } +}; +MODULE_DEVICE_TABLE(hid, egalax_devices); + +static const struct hid_usage_id egalax_grabbed_usages[] = { + { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID }, + { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1} +}; + +static struct hid_driver egalax_driver = { + .name = "egalax-touch", + .id_table = egalax_devices, + .probe = egalax_probe, + .remove = egalax_remove, + .input_mapping = egalax_input_mapping, + .input_mapped = egalax_input_mapped, + .usage_table = egalax_grabbed_usages, + .event = egalax_event, +}; + +static int __init egalax_init(void) +{ + return hid_register_driver(&egalax_driver); +} + +static void __exit egalax_exit(void) +{ + hid_unregister_driver(&egalax_driver); +} + +module_init(egalax_init); +module_exit(egalax_exit); + diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 797e06470356..413b16527f16 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -170,6 +170,9 @@ #define USB_VENDOR_ID_DRAGONRISE 0x0079 +#define USB_VENDOR_ID_DWAV 0x0eef +#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH 0x480d + #define USB_VENDOR_ID_ELO 0x04E7 #define USB_DEVICE_ID_ELO_TS2700 0x0020 -- cgit v1.2.2 From c872b0fccc6e086beea0a7b3b4123b7d0e75a868 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Sat, 10 Apr 2010 21:29:09 +0200 Subject: HID: egalax: update slab.h include Implicit slab.h inclusion via percpu.h is about to go away. Make sure slab.h is included as necessary. Signed-off-by: Jiri Kosina --- drivers/hid/hid-egalax.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hid/hid-egalax.c b/drivers/hid/hid-egalax.c index 8b48d5a07179..f44bdc084cb2 100644 --- a/drivers/hid/hid-egalax.c +++ b/drivers/hid/hid-egalax.c @@ -16,6 +16,7 @@ #include #include #include +#include #include "usbhid/usbhid.h" MODULE_AUTHOR("Stephane Chatty "); -- cgit v1.2.2 From 5435f2818ea08bcb381dcd2a99b1607b2a42f329 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Sun, 11 Apr 2010 12:17:45 +0200 Subject: HID: hid-picolcd depends on LCD_CLASS_DEVICE MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit HID_PICOLCD should depend on LCD_CLASS_DEVICE, otherwise the build fails when HID_PICOLCD=y and LCD_CLASS_DEVICE=m: hid-picolcd.c:(.text+0x84523f): undefined reference to `lcd_device_unregister' hid-picolcd.c:(.text+0x8478ab): undefined reference to `lcd_device_register' hid-picolcd.c:(.text+0x84c15f): undefined reference to `lcd_device_unregister' Same applies to FB, BACKLIGHT_CLASS_DEVICE and LEDS_CLASS. Add suboptions for those features to handle the deps on kbuild side and just check HID_PICOLCD_* in the code. Reported-by: Randy Dunlap Signed-off-by: Bruno Prémont Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 53 +++++++++++++++++++++++++++++++++++++++-------- drivers/hid/hid-picolcd.c | 40 +++++++++++++++++------------------ 2 files changed, 64 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index a2ecd83bfe89..0e8aa63e3f55 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -265,11 +265,6 @@ config HID_PETALYNX config HID_PICOLCD tristate "PicoLCD (graphic version)" depends on USB_HID - select FB_DEFERRED_IO if FB - select FB_SYS_FILLRECT if FB - select FB_SYS_COPYAREA if FB - select FB_SYS_IMAGEBLIT if FB - select FB_SYS_FOPS if FB ---help--- This provides support for Minibox PicoLCD devices, currently only the graphical ones are supported. @@ -277,14 +272,54 @@ config HID_PICOLCD This includes support for the following device features: - Keypad - Switching between Firmware and Flash mode - - Framebuffer for monochrome 256x64 display - - Backlight control (needs CONFIG_BACKLIGHT_CLASS_DEVICE) - - Contrast control (needs CONFIG_LCD_CLASS_DEVICE) - - General purpose outputs (needs CONFIG_LEDS_CLASS) - EEProm / Flash access (via debugfs) + Features selectively enabled: + - Framebuffer for monochrome 256x64 display + - Backlight control + - Contrast control + - General purpose outputs Features that are not (yet) supported: - IR +config HID_PICOLCD_FB + bool "Framebuffer support" if EMBEDDED + default !EMBEDDED + depends on HID_PICOLCD + depends on HID_PICOLCD=FB || FB=y + select FB_DEFERRED_IO + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + ---help--- + Provide access to PicoLCD's 256x64 monochrome display via a + frambuffer device. + +config HID_PICOLCD_BACKLIGHT + bool "Backlight control" if EMBEDDED + default !EMBEDDED + depends on HID_PICOLCD + depends on HID_PICOLCD=BACKLIGHT_CLASS_DEVICE || BACKLIGHT_CLASS_DEVICE=y + ---help--- + Provide access to PicoLCD's backlight control via backlight + class. + +config HID_PICOLCD_LCD + bool "Contrast control" if EMBEDDED + default !EMBEDDED + depends on HID_PICOLCD + depends on HID_PICOLCD=LCD_CLASS_DEVICE || LCD_CLASS_DEVICE=y + ---help--- + Provide access to PicoLCD's LCD contrast via lcd class. + +config HID_PICOLCD_LEDS + bool "GPO via leds class" if EMBEDDED + default !EMBEDDED + depends on HID_PICOLCD + depends on HID_PICOLCD=LEDS_CLASS || LEDS_CLASS=y + ---help--- + Provide access to PicoLCD's GPO pins via leds class. + config HID_QUANTA tristate "Quanta Optical Touch" depends on USB_HID diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c index 0eacc6b6d5bb..0fbc7d396164 100644 --- a/drivers/hid/hid-picolcd.c +++ b/drivers/hid/hid-picolcd.c @@ -77,7 +77,7 @@ #define REPORT_HOOK_VERSION 0xf7 /* LCD: IN[2], OUT[1] */ #define REPORT_EXIT_FLASHER 0xff /* Bootloader: OUT[2] */ -#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE) +#ifdef CONFIG_HID_PICOLCD_FB /* Framebuffer * * The PicoLCD use a Topway LCD module of 256x64 pixel @@ -128,7 +128,7 @@ static const struct fb_var_screeninfo picolcdfb_var = { .bits_per_pixel = 1, .grayscale = 1, }; -#endif /* CONFIG_FB */ +#endif /* CONFIG_HID_PICOLCD_FB */ /* Input device * @@ -183,7 +183,7 @@ struct picolcd_data { struct input_dev *input_cir; unsigned short keycode[PICOLCD_KEYS]; -#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE) +#ifdef CONFIG_HID_PICOLCD_FB /* Framebuffer stuff */ u8 fb_update_rate; u8 fb_bpp; @@ -191,21 +191,21 @@ struct picolcd_data { u8 *fb_bitmap; /* framebuffer */ struct fb_info *fb_info; struct fb_deferred_io fb_defio; -#endif /* CONFIG_FB */ -#if defined(CONFIG_LCD_CLASS_DEVICE) || defined(CONFIG_LCD_CLASS_DEVICE_MODULE) +#endif /* CONFIG_HID_PICOLCD_FB */ +#ifdef CONFIG_HID_PICOLCD_LCD struct lcd_device *lcd; u8 lcd_contrast; -#endif -#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) +#endif /* CONFIG_HID_PICOLCD_LCD */ +#ifdef CONFIG_HID_PICOLCD_BACKLIGHT struct backlight_device *backlight; u8 lcd_brightness; u8 lcd_power; -#endif /* CONFIG_BACKLIGHT_CLASS_DEVICE */ -#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) +#endif /* CONFIG_HID_PICOLCD_BACKLIGHT */ +#ifdef CONFIG_HID_PICOLCD_LEDS /* LED stuff */ u8 led_state; struct led_classdev *led[8]; -#endif /* CONFIG_LEDS_CLASS */ +#endif /* CONFIG_HID_PICOLCD_LEDS */ /* Housekeeping stuff */ spinlock_t lock; @@ -287,7 +287,7 @@ static struct picolcd_pending *picolcd_send_and_wait(struct hid_device *hdev, return work; } -#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE) +#ifdef CONFIG_HID_PICOLCD_FB /* Send a given tile to PicoLCD */ static int picolcd_fb_send_tile(struct hid_device *hdev, int chip, int tile) { @@ -766,9 +766,9 @@ static void picolcd_exit_framebuffer(struct picolcd_data *data) { } #define picolcd_fbinfo(d) NULL -#endif /* CONFIG_FB */ +#endif /* CONFIG_HID_PICOLCD_FB */ -#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) +#ifdef CONFIG_HID_PICOLCD_BACKLIGHT /* * backlight class device */ @@ -864,9 +864,9 @@ static inline int picolcd_resume_backlight(struct picolcd_data *data) { return 0; } -#endif /* CONFIG_BACKLIGHT_CLASS_DEVICE */ +#endif /* CONFIG_HID_PICOLCD_BACKLIGHT */ -#if defined(CONFIG_LCD_CLASS_DEVICE) || defined(CONFIG_LCD_CLASS_DEVICE_MODULE) +#ifdef CONFIG_HID_PICOLCD_LCD /* * lcd class device */ @@ -957,9 +957,9 @@ static inline int picolcd_resume_lcd(struct picolcd_data *data) { return 0; } -#endif /* CONFIG_LCD_CLASS_DEVICE */ +#endif /* CONFIG_HID_PICOLCD_LCD */ -#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) +#ifdef CONFIG_HID_PICOLCD_LEDS /** * LED class device */ @@ -1104,7 +1104,7 @@ static inline int picolcd_leds_set(struct picolcd_data *data) { return 0; } -#endif /* CONFIG_LEDS_CLASS */ +#endif /* CONFIG_HID_PICOLCD_LEDS */ /* * input class device @@ -1243,10 +1243,10 @@ static int picolcd_reset(struct hid_device *hdev) picolcd_resume_lcd(data); picolcd_resume_backlight(data); -#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE) +#ifdef CONFIG_HID_PICOLCD_FB if (data->fb_info) schedule_delayed_work(&data->fb_info->deferred_work, 0); -#endif /* CONFIG_FB */ +#endif /* CONFIG_HID_PICOLCD_FB */ picolcd_leds_set(data); return 0; -- cgit v1.2.2 From 6dec143a50c01ca0cc0afcbf5ea4bb8e87981edf Mon Sep 17 00:00:00 2001 From: Stephane Chatty Date: Sun, 11 Apr 2010 14:51:24 +0200 Subject: HID: add support for 3M multitouch 22" display Now support the 22" display and its updated firmware, including touch width and height. The number of touches can now go up to 60, and our single touch emulation will fail when there are more than 6-7 touches; further work is needed on this. Signed-off-by: Stephane Chatty Signed-off-by: Jiri Kosina --- drivers/hid/hid-3m-pct.c | 31 ++++++++++++++++++++++++++++--- drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 1 + 3 files changed, 30 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-3m-pct.c b/drivers/hid/hid-3m-pct.c index 2370aefc86b2..883fd1af3c4c 100644 --- a/drivers/hid/hid-3m-pct.c +++ b/drivers/hid/hid-3m-pct.c @@ -1,7 +1,7 @@ /* * HID driver for 3M PCT multitouch panels * - * Copyright (c) 2009 Stephane Chatty + * Copyright (c) 2009-2010 Stephane Chatty * */ @@ -24,7 +24,7 @@ MODULE_LICENSE("GPL"); #include "hid-ids.h" struct mmm_finger { - __s32 x, y; + __s32 x, y, w, h; __u8 rank; bool touch, valid; }; @@ -81,7 +81,18 @@ static int mmm_input_mapping(struct hid_device *hdev, struct hid_input *hi, /* touchscreen emulation */ hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH); return 1; + case HID_DG_WIDTH: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_TOUCH_MAJOR); + return 1; + case HID_DG_HEIGHT: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_TOUCH_MINOR); + input_set_abs_params(hi->input, ABS_MT_ORIENTATION, + 1, 1, 0, 0); + return 1; case HID_DG_CONTACTID: + field->logical_maximum = 59; hid_map_usage(hi, usage, bit, max, EV_ABS, ABS_MT_TRACKING_ID); return 1; @@ -127,9 +138,15 @@ static void mmm_filter_event(struct mmm_data *md, struct input_dev *input) /* this finger is just placeholder data, ignore */ } else if (f->touch) { /* this finger is on the screen */ + int wide = (f->w > f->h); input_event(input, EV_ABS, ABS_MT_TRACKING_ID, i); input_event(input, EV_ABS, ABS_MT_POSITION_X, f->x); input_event(input, EV_ABS, ABS_MT_POSITION_Y, f->y); + input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide); + input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, + wide ? f->w : f->h); + input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, + wide ? f->h : f->w); input_mt_sync(input); /* * touchscreen emulation: maintain the age rank @@ -196,6 +213,14 @@ static int mmm_event(struct hid_device *hid, struct hid_field *field, case HID_DG_CONFIDENCE: md->valid = value; break; + case HID_DG_WIDTH: + if (md->valid) + md->f[md->curid].w = value; + break; + case HID_DG_HEIGHT: + if (md->valid) + md->f[md->curid].h = value; + break; case HID_DG_CONTACTID: if (md->valid) { md->curid = value; @@ -254,6 +279,7 @@ static void mmm_remove(struct hid_device *hdev) static const struct hid_device_id mmm_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) }, + { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M2256) }, { } }; MODULE_DEVICE_TABLE(hid, mmm_devices); @@ -286,5 +312,4 @@ static void __exit mmm_exit(void) module_init(mmm_init); module_exit(mmm_exit); -MODULE_LICENSE("GPL"); diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 7396f47c79db..9f92f629d448 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1251,6 +1251,7 @@ EXPORT_SYMBOL_GPL(hid_disconnect); /* a list of devices for which there is a specialized driver on HID bus */ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) }, + { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M2256) }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 72c05f90553c..e1b4ce4eeb6e 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -20,6 +20,7 @@ #define USB_VENDOR_ID_3M 0x0596 #define USB_DEVICE_ID_3M1968 0x0500 +#define USB_DEVICE_ID_3M2256 0x0502 #define USB_VENDOR_ID_A4TECH 0x09da #define USB_DEVICE_ID_A4TECH_WCP32PU 0x0006 -- cgit v1.2.2 From 75c28df87eb6d8e1389af67f26fbe2394e28385e Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Mon, 12 Apr 2010 12:16:11 -0600 Subject: HID: non-overlapping zeroing of extra bits From my review of the way the unused bits of report are being zeroed, it seems like there must be a bug. Currently, the zeroing is done in hid_output_field and it covers any bits between the last used bit and the end of the byte. But in case of, say, my keyboard, NumLock is mask 0x01 and CapsLock is 0x02. Invoking hid_output_field for NumLock definitely zeroes across CapsLock. The only reason this works is that the fields are sorted by the offset. It would be more correct and simpler to zero-fill the buffer into which the fields are set. The patch is tested with an IBM keyboard that is improperly sensitive to out-of-report pad bits, the extra bits are still zeroed and the fields continue to work as expected. It is also tested with good keyboards. In case, a related bug in RHEL 5 is tracked with Red Hat bug 513934. Signed-off-by: Pete Zaitcev Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 9f92f629d448..8617aa97a9c8 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -940,13 +940,8 @@ static void hid_output_field(struct hid_field *field, __u8 *data) unsigned count = field->report_count; unsigned offset = field->report_offset; unsigned size = field->report_size; - unsigned bitsused = offset + count * size; unsigned n; - /* make sure the unused bits in the last byte are zeros */ - if (count > 0 && size > 0 && (bitsused % 8) != 0) - data[(bitsused-1)/8] &= (1 << (bitsused % 8)) - 1; - for (n = 0; n < count; n++) { if (field->logical_minimum < 0) /* signed values */ implement(data, offset + n * size, size, s32ton(field->value[n], size)); @@ -966,6 +961,7 @@ void hid_output_report(struct hid_report *report, __u8 *data) if (report->id > 0) *data++ = report->id; + memset(data, 0, ((report->size - 1) >> 3) + 1); for (n = 0; n < report->maxfield; n++) hid_output_field(report->field[n], data); } -- cgit v1.2.2 From 36213e1e40fb863e2e8ef607b2958504b48f6b8e Mon Sep 17 00:00:00 2001 From: Stephane Chatty Date: Thu, 15 Apr 2010 00:28:11 +0200 Subject: HID: added support for the Cando dual touch panel Added support for the Cando dual touch panels, found in the Lenovo S10-3t. Signed-off-by: Stephane Chatty Tested-by: Priya Vijayan Tested-by: Florian Echtler Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 6 ++ drivers/hid/Makefile | 1 + drivers/hid/hid-cando.c | 267 ++++++++++++++++++++++++++++++++++++++++++++++++ drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 3 + 5 files changed, 278 insertions(+) create mode 100644 drivers/hid/hid-cando.c (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 71d4c0703629..7447e7a55cbb 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -86,6 +86,12 @@ config HID_BELKIN ---help--- Support for Belkin Flip KVM and Wireless keyboard. +config HID_CANDO + tristate "Cando dual touch panel" + depends on USB_HID + ---help--- + Support for Cando dual touch panel. + config HID_CHERRY tristate "Cherry" if EMBEDDED depends on USB_HID diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index 0b2618f092ca..4c45b447504a 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_HID_3M_PCT) += hid-3m-pct.o obj-$(CONFIG_HID_A4TECH) += hid-a4tech.o obj-$(CONFIG_HID_APPLE) += hid-apple.o obj-$(CONFIG_HID_BELKIN) += hid-belkin.o +obj-$(CONFIG_HID_CANDO) += hid-cando.o obj-$(CONFIG_HID_CHERRY) += hid-cherry.o obj-$(CONFIG_HID_CHICONY) += hid-chicony.o obj-$(CONFIG_HID_CYPRESS) += hid-cypress.o diff --git a/drivers/hid/hid-cando.c b/drivers/hid/hid-cando.c new file mode 100644 index 000000000000..4fc8f513dcc5 --- /dev/null +++ b/drivers/hid/hid-cando.c @@ -0,0 +1,267 @@ +/* + * HID driver for Cando dual-touch panels + * + * Copyright (c) 2010 Stephane Chatty + * + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include +#include +#include +#include + +MODULE_AUTHOR("Stephane Chatty "); +MODULE_DESCRIPTION("Cando dual-touch panel"); +MODULE_LICENSE("GPL"); + +#include "hid-ids.h" + +struct cando_data { + __u16 x, y; + __u8 id; + __s8 oldest; /* id of the oldest finger in previous frame */ + bool valid; /* valid finger data, or just placeholder? */ + bool first; /* is this the first finger in this frame? */ + __s8 firstid; /* id of the first finger in the frame */ + __u16 firstx, firsty; /* (x, y) of the first finger in the frame */ +}; + +static int cando_input_mapping(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + switch (usage->hid & HID_USAGE_PAGE) { + + case HID_UP_GENDESK: + switch (usage->hid) { + case HID_GD_X: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_POSITION_X); + /* touchscreen emulation */ + input_set_abs_params(hi->input, ABS_X, + field->logical_minimum, + field->logical_maximum, 0, 0); + return 1; + case HID_GD_Y: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_POSITION_Y); + /* touchscreen emulation */ + input_set_abs_params(hi->input, ABS_Y, + field->logical_minimum, + field->logical_maximum, 0, 0); + return 1; + } + return 0; + + case HID_UP_DIGITIZER: + switch (usage->hid) { + case HID_DG_TIPSWITCH: + case HID_DG_CONTACTMAX: + return -1; + case HID_DG_INRANGE: + /* touchscreen emulation */ + hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH); + return 1; + case HID_DG_CONTACTID: + hid_map_usage(hi, usage, bit, max, + EV_ABS, ABS_MT_TRACKING_ID); + return 1; + } + return 0; + } + + return 0; +} + +static int cando_input_mapped(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + if (usage->type == EV_KEY || usage->type == EV_ABS) + clear_bit(usage->code, *bit); + + return 0; +} + +/* + * this function is called when a whole finger has been parsed, + * so that it can decide what to send to the input layer. + */ +static void cando_filter_event(struct cando_data *td, struct input_dev *input) +{ + td->first = !td->first; /* touchscreen emulation */ + + if (!td->valid) { + /* + * touchscreen emulation: if this is the second finger and + * the first was valid, the first was the oldest; if the + * first was not valid and there was a valid finger in the + * previous frame, this is a release. + */ + if (td->first) { + td->firstid = -1; + } else if (td->firstid >= 0) { + input_event(input, EV_ABS, ABS_X, td->firstx); + input_event(input, EV_ABS, ABS_Y, td->firsty); + td->oldest = td->firstid; + } else if (td->oldest >= 0) { + input_event(input, EV_KEY, BTN_TOUCH, 0); + td->oldest = -1; + } + + return; + } + + input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id); + input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x); + input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y); + + input_mt_sync(input); + + /* + * touchscreen emulation: if there was no touching finger previously, + * emit touch event + */ + if (td->oldest < 0) { + input_event(input, EV_KEY, BTN_TOUCH, 1); + td->oldest = td->id; + } + + /* + * touchscreen emulation: if this is the first finger, wait for the + * second; the oldest is then the second if it was the oldest already + * or if there was no first, the first otherwise. + */ + if (td->first) { + td->firstx = td->x; + td->firsty = td->y; + td->firstid = td->id; + } else { + int x, y, oldest; + if (td->id == td->oldest || td->firstid < 0) { + x = td->x; + y = td->y; + oldest = td->id; + } else { + x = td->firstx; + y = td->firsty; + oldest = td->firstid; + } + input_event(input, EV_ABS, ABS_X, x); + input_event(input, EV_ABS, ABS_Y, y); + td->oldest = oldest; + } +} + + +static int cando_event(struct hid_device *hid, struct hid_field *field, + struct hid_usage *usage, __s32 value) +{ + struct cando_data *td = hid_get_drvdata(hid); + + if (hid->claimed & HID_CLAIMED_INPUT) { + struct input_dev *input = field->hidinput->input; + + switch (usage->hid) { + case HID_DG_INRANGE: + td->valid = value; + break; + case HID_DG_CONTACTID: + td->id = value; + break; + case HID_GD_X: + td->x = value; + break; + case HID_GD_Y: + td->y = value; + cando_filter_event(td, input); + break; + case HID_DG_TIPSWITCH: + /* avoid interference from generic hidinput handling */ + break; + + default: + /* fallback to the generic hidinput handling */ + return 0; + } + } + + /* we have handled the hidinput part, now remains hiddev */ + if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event) + hid->hiddev_hid_event(hid, field, usage, value); + + return 1; +} + +static int cando_probe(struct hid_device *hdev, const struct hid_device_id *id) +{ + int ret; + struct cando_data *td; + + td = kmalloc(sizeof(struct cando_data), GFP_KERNEL); + if (!td) { + dev_err(&hdev->dev, "cannot allocate Cando Touch data\n"); + return -ENOMEM; + } + hid_set_drvdata(hdev, td); + + ret = hid_parse(hdev); + if (!ret) + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + + if (ret) + kfree(td); + + return ret; +} + +static void cando_remove(struct hid_device *hdev) +{ + hid_hw_stop(hdev); + kfree(hid_get_drvdata(hdev)); + hid_set_drvdata(hdev, NULL); +} + +static const struct hid_device_id cando_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, + USB_DEVICE_ID_CANDO_MULTI_TOUCH) }, + { } +}; +MODULE_DEVICE_TABLE(hid, cando_devices); + +static const struct hid_usage_id cando_grabbed_usages[] = { + { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID }, + { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1} +}; + +static struct hid_driver cando_driver = { + .name = "cando-touch", + .id_table = cando_devices, + .probe = cando_probe, + .remove = cando_remove, + .input_mapping = cando_input_mapping, + .input_mapped = cando_input_mapped, + .usage_table = cando_grabbed_usages, + .event = cando_event, +}; + +static int __init cando_init(void) +{ + return hid_register_driver(&cando_driver); +} + +static void __exit cando_exit(void) +{ + hid_unregister_driver(&cando_driver); +} + +module_init(cando_init); +module_exit(cando_exit); + diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 2e2aa759d230..fefbe3fdf8e6 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1295,6 +1295,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 797e06470356..635970462eaa 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -123,6 +123,9 @@ #define USB_VENDOR_ID_BERKSHIRE 0x0c98 #define USB_DEVICE_ID_BERKSHIRE_PCWD 0x1140 +#define USB_VENDOR_ID_CANDO 0x2087 +#define USB_DEVICE_ID_CANDO_MULTI_TOUCH 0x0a01 + #define USB_VENDOR_ID_CH 0x068e #define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2 #define USB_DEVICE_ID_CH_COMBATSTICK 0x00f4 -- cgit v1.2.2 From b5e5a37e36cd4d355b875665312d7aaae4e5833c Mon Sep 17 00:00:00 2001 From: Bastien Nocera Date: Fri, 16 Apr 2010 17:19:50 +0100 Subject: HID: add HID_QUIRK_HIDDEV_FORCE and HID_QUIRK_NO_IGNORE Add two quirks to make it possible for usbhid module options to override whether a device is ignored (HID_QUIRK_NO_IGNORE) and whether to connect a hiddev device (HID_QUIRK_HIDDEV_FORCE). Passing HID_QUIRK_NO_IGNORE for your device means that it will not be ignored by the HID layer, even if present in a blacklist. HID_QUIRK_HIDDEV_FORCE will force the creation of a hiddev for that device, making it accessible from user-space. Tested with an Apple IR Receiver, switching it from using appleir to using lirc's macmini driver. Signed-off-by: Bastien Nocera Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 4 +++- drivers/hid/usbhid/hid-core.c | 1 + 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 8617aa97a9c8..468c6c2d4ad5 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1168,6 +1168,8 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask) unsigned int i; int len; + if (hdev->quirks & HID_QUIRK_HIDDEV_FORCE) + connect_mask |= (HID_CONNECT_HIDDEV_FORCE | HID_CONNECT_HIDDEV); if (hdev->bus != BUS_USB) connect_mask &= ~HID_CONNECT_HIDDEV; if (hid_hiddev(hdev)) @@ -1757,7 +1759,7 @@ int hid_add_device(struct hid_device *hdev) /* we need to kill them here, otherwise they will stay allocated to * wait for coming driver */ - if (hid_ignore(hdev)) + if (!(hdev->quirks & HID_QUIRK_NO_IGNORE) && hid_ignore(hdev)) return -ENODEV; /* XXX hack, any other cleaner solution after the driver core diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 9cd61a52e9e3..245aef0de8f2 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -1143,6 +1143,7 @@ static int usbhid_probe(struct usb_interface *intf, const struct usb_device_id * hid->vendor = le16_to_cpu(dev->descriptor.idVendor); hid->product = le16_to_cpu(dev->descriptor.idProduct); hid->name[0] = 0; + hid->quirks = usbhid_lookup_quirk(hid->vendor, hid->product); if (intf->cur_altsetting->desc.bInterfaceProtocol == USB_INTERFACE_PROTOCOL_MOUSE) hid->type = HID_TYPE_USBMOUSE; -- cgit v1.2.2 From 653efbb4b2c796a39c67501e4bce983a41278dfa Mon Sep 17 00:00:00 2001 From: Stephane Chatty Date: Fri, 16 Apr 2010 22:23:58 +0200 Subject: HID: fixed missing inits in hid-cando.c With flags non initialized, the single touch emulation has an erratic behavior. Fixed this. Signed-off-by: Stephane Chatty Signed-off-by: Jiri Kosina --- drivers/hid/hid-cando.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-cando.c b/drivers/hid/hid-cando.c index 4fc8f513dcc5..f9b2233d9e47 100644 --- a/drivers/hid/hid-cando.c +++ b/drivers/hid/hid-cando.c @@ -211,6 +211,9 @@ static int cando_probe(struct hid_device *hdev, const struct hid_device_id *id) return -ENOMEM; } hid_set_drvdata(hdev, td); + td->first = false; + td->oldest = -1; + td->valid = false; ret = hid_parse(hdev); if (!ret) -- cgit v1.2.2 From 18392212932ecbdc71bc6a298ad301328eefb09d Mon Sep 17 00:00:00 2001 From: Lorenzo Castelli Date: Fri, 16 Apr 2010 19:00:31 +0200 Subject: HID: add mappings for a few keys found on Logitech MX3200 The keys are added to the generic wireless mappings in case other keyboards use them. Note that the product ID for the MX3200 is the same as USB_DEVICE_ID_S510_RECEIVER_2. Signed-off-by: Lorenzo Castelli Signed-off-by: Jiri Kosina --- drivers/hid/hid-lg.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c index 3677c9037a11..f6433d8050a9 100644 --- a/drivers/hid/hid-lg.c +++ b/drivers/hid/hid-lg.c @@ -126,6 +126,9 @@ static int lg_wireless_mapping(struct hid_input *hi, struct hid_usage *usage, case 0x1004: lg_map_key_clear(KEY_VIDEO); break; case 0x1005: lg_map_key_clear(KEY_AUDIO); break; case 0x100a: lg_map_key_clear(KEY_DOCUMENTS); break; + /* The following two entries are Playlist 1 and 2 on the MX3200 */ + case 0x100f: lg_map_key_clear(KEY_FN_1); break; + case 0x1010: lg_map_key_clear(KEY_FN_2); break; case 0x1011: lg_map_key_clear(KEY_PREVIOUSSONG); break; case 0x1012: lg_map_key_clear(KEY_NEXTSONG); break; case 0x1013: lg_map_key_clear(KEY_CAMERA); break; @@ -137,6 +140,7 @@ static int lg_wireless_mapping(struct hid_input *hi, struct hid_usage *usage, case 0x1019: lg_map_key_clear(KEY_PROG1); break; case 0x101a: lg_map_key_clear(KEY_PROG2); break; case 0x101b: lg_map_key_clear(KEY_PROG3); break; + case 0x101c: lg_map_key_clear(KEY_CYCLEWINDOWS); break; case 0x101f: lg_map_key_clear(KEY_ZOOMIN); break; case 0x1020: lg_map_key_clear(KEY_ZOOMOUT); break; case 0x1021: lg_map_key_clear(KEY_ZOOMRESET); break; @@ -147,6 +151,11 @@ static int lg_wireless_mapping(struct hid_input *hi, struct hid_usage *usage, case 0x1029: lg_map_key_clear(KEY_SHUFFLE); break; case 0x102a: lg_map_key_clear(KEY_BACK); break; case 0x102b: lg_map_key_clear(KEY_CYCLEWINDOWS); break; + case 0x102d: lg_map_key_clear(KEY_WWW); break; + /* The following two are 'Start/answer call' and 'End/reject call' + on the MX3200 */ + case 0x1031: lg_map_key_clear(KEY_OK); break; + case 0x1032: lg_map_key_clear(KEY_CANCEL); break; case 0x1041: lg_map_key_clear(KEY_BATTERY); break; case 0x1042: lg_map_key_clear(KEY_WORDPROCESSOR); break; case 0x1043: lg_map_key_clear(KEY_SPREADSHEET); break; -- cgit v1.2.2 From ed9eac5b493c679ef5fc52273758fe334de82714 Mon Sep 17 00:00:00 2001 From: Bastien Nocera Date: Wed, 21 Apr 2010 14:52:00 +0100 Subject: HID: add support for the Wacom Intuos 4 wireless Same command set as the Graphire Bluetooth tablet. Signed-off-by: Bastien Nocera Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-wacom.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index e1b4ce4eeb6e..0786bbdafb4a 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -456,6 +456,7 @@ #define USB_VENDOR_ID_WACOM 0x056a #define USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH 0x81 +#define USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH 0xbd #define USB_VENDOR_ID_WISEGROUP 0x0925 #define USB_DEVICE_ID_SMARTJOY_PLUS 0x0005 diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index 97ef6260fda0..51d7d77eb43b 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -435,7 +435,7 @@ static void wacom_remove(struct hid_device *hdev) static const struct hid_device_id wacom_devices[] = { { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) }, - + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) }, { } }; MODULE_DEVICE_TABLE(hid, wacom_devices); -- cgit v1.2.2 From 4afb032068ff78b4fef5bb2dc33e8ac7d1079e98 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Wed, 21 Apr 2010 16:22:30 +0200 Subject: HID: fix support for Wacom Intuos 4 wireless Commit ed9eac5b493c679 ("HID: add support for the Wacom Intuos 4 wireles") forgot to add VID/PID to hid_blacklist[]. Fix that up. Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 468c6c2d4ad5..2d8f79d8f888 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1361,6 +1361,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) } { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) }, { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) }, -- cgit v1.2.2 From ba4d8abb31def963f49b7c239a8acce57fe1d1cc Mon Sep 17 00:00:00 2001 From: Stephane Chatty Date: Thu, 22 Apr 2010 23:24:36 +0200 Subject: HID: Support for the 11.6" Cando panel Added support for the 11.6" Cando panel found on the Acer Timeline 1825PTZ. Signed-off-by: Stephane Chatty Tested-by: Johannes Klug Signed-off-by: Jiri Kosina --- drivers/hid/hid-cando.c | 2 ++ drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 1 + 3 files changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-cando.c b/drivers/hid/hid-cando.c index f9b2233d9e47..4267a6fdc277 100644 --- a/drivers/hid/hid-cando.c +++ b/drivers/hid/hid-cando.c @@ -235,6 +235,8 @@ static void cando_remove(struct hid_device *hdev) static const struct hid_device_id cando_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, + USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) }, { } }; MODULE_DEVICE_TABLE(hid, cando_devices); diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index fefbe3fdf8e6..262ab1048b60 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1296,6 +1296,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) }, { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 635970462eaa..968f59bb2e95 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -125,6 +125,7 @@ #define USB_VENDOR_ID_CANDO 0x2087 #define USB_DEVICE_ID_CANDO_MULTI_TOUCH 0x0a01 +#define USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6 0x0b03 #define USB_VENDOR_ID_CH 0x068e #define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2 -- cgit v1.2.2 From 96a7813736a6aa1e2561ecc0d499817daecb4860 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 23 Apr 2010 00:22:07 +0200 Subject: HID: fix build failure Fix build failure introduced by 4afb032068f ("HID: fix support for Wacom Intuos 4 wireless") due to missing coma. Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 2d8f79d8f888..34429d7d89af 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1361,7 +1361,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) }, - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) } + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) }, { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) }, { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) }, -- cgit v1.2.2 From 76d17e6ca30204532c631d092de41febb3f76b77 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Sun, 25 Apr 2010 21:31:40 +0200 Subject: HID: fix picolcd's version parsing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During grouping of version checking code bootloader mode's version bytes got swapped. Fix their order. Signed-off-by: Bruno Prémont Signed-off-by: Jiri Kosina --- drivers/hid/hid-picolcd.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c index 0fbc7d396164..6f71c60bf653 100644 --- a/drivers/hid/hid-picolcd.c +++ b/drivers/hid/hid-picolcd.c @@ -1196,16 +1196,14 @@ static int picolcd_check_version(struct hid_device *hdev) } if (verinfo->raw_size == 2) { + data->version[0] = verinfo->raw_data[1]; + data->version[1] = verinfo->raw_data[0]; if (data->status & PICOLCD_BOOTLOADER) { dev_info(&hdev->dev, "PicoLCD, bootloader version %d.%d\n", - verinfo->raw_data[0], verinfo->raw_data[1]); - data->version[0] = verinfo->raw_data[0]; - data->version[1] = verinfo->raw_data[1]; + verinfo->raw_data[1], verinfo->raw_data[0]); } else { dev_info(&hdev->dev, "PicoLCD, firmware version %d.%d\n", verinfo->raw_data[1], verinfo->raw_data[0]); - data->version[0] = verinfo->raw_data[1]; - data->version[1] = verinfo->raw_data[0]; } } else { dev_err(&hdev->dev, "confused, got unexpected version response from PicoLCD\n"); -- cgit v1.2.2 From 6a740aa4f47b9f29bad5292cf51f008f3edad9b1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Sun, 25 Apr 2010 21:40:03 +0200 Subject: HID: add suspend/resume hooks for hid drivers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add suspend/resume hooks for HID drivers so these can do some additional state adjustment when device gets suspended/resumed. Signed-off-by: Bruno Prémont Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hid-core.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 56d06cd8075b..14a67fba590e 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -1290,6 +1290,11 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message) { set_bit(HID_REPORTED_IDLE, &usbhid->iofl); spin_unlock_irq(&usbhid->lock); + if (hid->driver && hid->driver->suspend) { + status = hid->driver->suspend(hid, message); + if (status < 0) + return status; + } } else { usbhid_mark_busy(usbhid); spin_unlock_irq(&usbhid->lock); @@ -1297,6 +1302,11 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message) } } else { + if (hid->driver && hid->driver->suspend) { + status = hid->driver->suspend(hid, message); + if (status < 0) + return status; + } spin_lock_irq(&usbhid->lock); set_bit(HID_REPORTED_IDLE, &usbhid->iofl); spin_unlock_irq(&usbhid->lock); @@ -1351,6 +1361,11 @@ static int hid_resume(struct usb_interface *intf) hid_io_error(hid); usbhid_restart_queues(usbhid); + if (status >= 0 && hid->driver && hid->driver->resume) { + int ret = hid->driver->resume(hid); + if (ret < 0) + status = ret; + } dev_dbg(&intf->dev, "resume status %d\n", status); return 0; } @@ -1359,9 +1374,16 @@ static int hid_reset_resume(struct usb_interface *intf) { struct hid_device *hid = usb_get_intfdata(intf); struct usbhid_device *usbhid = hid->driver_data; + int status; clear_bit(HID_REPORTED_IDLE, &usbhid->iofl); - return hid_post_reset(intf); + status = hid_post_reset(intf); + if (status >= 0 && hid->driver && hid->driver->reset_resume) { + int ret = hid->driver->reset_resume(hid); + if (ret < 0) + status = ret; + } + return status; } #endif /* CONFIG_PM */ -- cgit v1.2.2 From 0b5adf92ec793c665b0de63ac146d190a921c391 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Sun, 25 Apr 2010 21:29:16 +0200 Subject: HID: split picolcd's operation_mode sysfs attribute MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Original operation_mode sysfs attribute accepts the operation mode as main value with an option delay as second value to change the start-up delay on mode change. As it is preferred to have exactly one value per sysfs attribute, extract this delay into a separate sysfs attribute called operation_mode_delay. Signed-off-by: Bruno Prémont Signed-off-by: Jiri Kosina --- drivers/hid/hid-picolcd.c | 62 ++++++++++++++++++++++++++++++++++------------- 1 file changed, 45 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c index 6f71c60bf653..aa6f2e18d4a6 100644 --- a/drivers/hid/hid-picolcd.c +++ b/drivers/hid/hid-picolcd.c @@ -177,6 +177,7 @@ struct picolcd_data { int addr_sz; #endif u8 version[2]; + unsigned short opmode_delay; /* input stuff */ u8 pressed_keys[2]; struct input_dev *input_keys; @@ -1270,8 +1271,7 @@ static ssize_t picolcd_operation_mode_store(struct device *dev, struct picolcd_data *data = dev_get_drvdata(dev); struct hid_report *report = NULL; size_t cnt = count; - int timeout = 5000; - unsigned u; + int timeout = data->opmode_delay; unsigned long flags; if (cnt >= 3 && strncmp("lcd", buf, 3) == 0) { @@ -1288,20 +1288,10 @@ static ssize_t picolcd_operation_mode_store(struct device *dev, if (!report) return -EINVAL; - while (cnt > 0 && (*buf == ' ' || *buf == '\t')) { - buf++; - cnt--; - } while (cnt > 0 && (buf[cnt-1] == '\n' || buf[cnt-1] == '\r')) cnt--; - if (cnt > 0) { - if (sscanf(buf, "%u", &u) != 1) - return -EINVAL; - if (u > 30000) - return -EINVAL; - else - timeout = u; - } + if (cnt != 0) + return -EINVAL; spin_lock_irqsave(&data->lock, flags); hid_set_field(report->field[0], 0, timeout & 0xff); @@ -1314,6 +1304,34 @@ static ssize_t picolcd_operation_mode_store(struct device *dev, static DEVICE_ATTR(operation_mode, 0644, picolcd_operation_mode_show, picolcd_operation_mode_store); +/* + * The "operation_mode_delay" sysfs attribute + */ +static ssize_t picolcd_operation_mode_delay_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + + return snprintf(buf, PAGE_SIZE, "%hu\n", data->opmode_delay); +} + +static ssize_t picolcd_operation_mode_delay_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + unsigned u; + if (sscanf(buf, "%u", &u) != 1) + return -EINVAL; + if (u > 30000) + return -EINVAL; + else + data->opmode_delay = u; + return count; +} + +static DEVICE_ATTR(operation_mode_delay, 0644, picolcd_operation_mode_delay_show, + picolcd_operation_mode_delay_store); + #ifdef CONFIG_DEBUG_FS /* @@ -2409,6 +2427,7 @@ static int picolcd_probe(struct hid_device *hdev, spin_lock_init(&data->lock); mutex_init(&data->mutex); data->hdev = hdev; + data->opmode_delay = 5000; if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER) data->status |= PICOLCD_BOOTLOADER; hid_set_drvdata(hdev, data); @@ -2436,24 +2455,32 @@ static int picolcd_probe(struct hid_device *hdev, goto err_cleanup_hid_hw; } - error = device_create_file(&hdev->dev, &dev_attr_operation_mode); + error = device_create_file(&hdev->dev, &dev_attr_operation_mode_delay); if (error) { dev_err(&hdev->dev, "failed to create sysfs attributes\n"); goto err_cleanup_hid_ll; } + error = device_create_file(&hdev->dev, &dev_attr_operation_mode); + if (error) { + dev_err(&hdev->dev, "failed to create sysfs attributes\n"); + goto err_cleanup_sysfs1; + } + if (data->status & PICOLCD_BOOTLOADER) error = picolcd_probe_bootloader(hdev, data); else error = picolcd_probe_lcd(hdev, data); if (error) - goto err_cleanup_sysfs; + goto err_cleanup_sysfs2; dbg_hid(PICOLCD_NAME " activated and initialized\n"); return 0; -err_cleanup_sysfs: +err_cleanup_sysfs2: device_remove_file(&hdev->dev, &dev_attr_operation_mode); +err_cleanup_sysfs1: + device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay); err_cleanup_hid_ll: hdev->ll_driver->close(hdev); err_cleanup_hid_hw: @@ -2478,6 +2505,7 @@ static void picolcd_remove(struct hid_device *hdev) picolcd_exit_devfs(data); device_remove_file(&hdev->dev, &dev_attr_operation_mode); + device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay); hdev->ll_driver->close(hdev); hid_hw_stop(hdev); hid_set_drvdata(hdev, NULL); -- cgit v1.2.2 From bf280628fca93c4c341587ec914863dcc395af72 Mon Sep 17 00:00:00 2001 From: Wayne Thomas Date: Thu, 29 Apr 2010 00:45:01 +0200 Subject: HID: add support for BTC Emprex 3009URF III Vista MCE Remote The Behavior Tech. Computer Corp. (BTC) remote branded as "Emprex 3009URF III Vista Remote Controller" uses non-standard mappings for all of its 'special purpose' keys (0xffbc usage page). This patch modifies the existing hid-topseed quirky driver to support both remotes in order to prevent proliferation of in-kernel quirky drivers until such a time that udev remapping works with these devices. Tested successfully with both the "Emprex" remote and the "CyberLink" remote originally supported by the hid-topseed driver. Signed-off-by: Wayne Thomas Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 2 +- drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 3 +++ drivers/hid/hid-topseed.c | 38 ++++++++++++++++++++++++-------------- 4 files changed, 29 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 8e1b505b5bf2..631ede69c012 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -332,7 +332,7 @@ config HID_TOPSEED depends on USB_HID default !EMBEDDED ---help--- - Say Y if you have a TopSeed Cyberlink remote control. + Say Y if you have a TopSeed Cyberlink or BTC Emprex remote control. config HID_THRUSTMASTER tristate "ThrustMaster devices support" if EMBEDDED diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 34429d7d89af..b9f99f9c4b2f 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1294,6 +1294,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) }, + { HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 0786bbdafb4a..9791d0a8d16d 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -124,6 +124,9 @@ #define USB_VENDOR_ID_BERKSHIRE 0x0c98 #define USB_DEVICE_ID_BERKSHIRE_PCWD 0x1140 +#define USB_VENDOR_ID_BTC 0x046e +#define USB_DEVICE_ID_BTC_EMPREX_REMOTE 0x5578 + #define USB_VENDOR_ID_CH 0x068e #define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2 #define USB_DEVICE_ID_CH_COMBATSTICK 0x00f4 diff --git a/drivers/hid/hid-topseed.c b/drivers/hid/hid-topseed.c index 6925eda1081a..2eebdcc57bcf 100644 --- a/drivers/hid/hid-topseed.c +++ b/drivers/hid/hid-topseed.c @@ -3,6 +3,9 @@ * * Copyright (c) 2008 Lev Babiev * based on hid-cherry driver + * + * Modified to also support BTC "Emprex 3009URF III Vista MCE Remote" by + * Wayne Thomas 2010. */ /* @@ -24,23 +27,29 @@ static int ts_input_mapping(struct hid_device *hdev, struct hid_input *hi, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max) { - if ((usage->hid & HID_USAGE_PAGE) != 0x0ffbc0000) + if ((usage->hid & HID_USAGE_PAGE) != HID_UP_LOGIVENDOR) return 0; switch (usage->hid & HID_USAGE) { - case 0x00d: ts_map_key_clear(KEY_HOME); break; - case 0x024: ts_map_key_clear(KEY_MENU); break; - case 0x025: ts_map_key_clear(KEY_TV); break; - case 0x048: ts_map_key_clear(KEY_RED); break; - case 0x047: ts_map_key_clear(KEY_GREEN); break; - case 0x049: ts_map_key_clear(KEY_YELLOW); break; - case 0x04a: ts_map_key_clear(KEY_BLUE); break; - case 0x04b: ts_map_key_clear(KEY_ANGLE); break; - case 0x04c: ts_map_key_clear(KEY_LANGUAGE); break; - case 0x04d: ts_map_key_clear(KEY_SUBTITLE); break; - case 0x031: ts_map_key_clear(KEY_AUDIO); break; - case 0x032: ts_map_key_clear(KEY_TEXT); break; - case 0x033: ts_map_key_clear(KEY_CHANNEL); break; + case 0x00d: ts_map_key_clear(KEY_MEDIA); break; + case 0x024: ts_map_key_clear(KEY_MENU); break; + case 0x025: ts_map_key_clear(KEY_TV); break; + case 0x031: ts_map_key_clear(KEY_AUDIO); break; + case 0x032: ts_map_key_clear(KEY_TEXT); break; + case 0x033: ts_map_key_clear(KEY_CHANNEL); break; + case 0x047: ts_map_key_clear(KEY_MP3); break; + case 0x048: ts_map_key_clear(KEY_TV2); break; + case 0x049: ts_map_key_clear(KEY_CAMERA); break; + case 0x04a: ts_map_key_clear(KEY_VIDEO); break; + case 0x04b: ts_map_key_clear(KEY_ANGLE); break; + case 0x04c: ts_map_key_clear(KEY_LANGUAGE); break; + case 0x04d: ts_map_key_clear(KEY_SUBTITLE); break; + case 0x050: ts_map_key_clear(KEY_RADIO); break; + case 0x05a: ts_map_key_clear(KEY_TEXT); break; + case 0x05b: ts_map_key_clear(KEY_RED); break; + case 0x05c: ts_map_key_clear(KEY_GREEN); break; + case 0x05d: ts_map_key_clear(KEY_YELLOW); break; + case 0x05e: ts_map_key_clear(KEY_BLUE); break; default: return 0; } @@ -50,6 +59,7 @@ static int ts_input_mapping(struct hid_device *hdev, struct hid_input *hi, static const struct hid_device_id ts_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) }, + { HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE) }, { } }; MODULE_DEVICE_TABLE(hid, ts_devices); -- cgit v1.2.2 From 9d71ea057bc4823058d8fe27d34e987eb9880457 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Sun, 2 May 2010 16:05:05 +0200 Subject: HID: add PM support to PicoLCD device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add PM support in order to turn off backlight on suspend, restore it on resume and especially restore complete state on reset-resume. Signed-off-by: Bruno Prémont Signed-off-by: Jiri Kosina --- drivers/hid/hid-picolcd.c | 79 ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 74 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c index aa6f2e18d4a6..95253b310541 100644 --- a/drivers/hid/hid-picolcd.c +++ b/drivers/hid/hid-picolcd.c @@ -763,7 +763,7 @@ static inline int picolcd_init_framebuffer(struct picolcd_data *data) { return 0; } -static void picolcd_exit_framebuffer(struct picolcd_data *data) +static inline void picolcd_exit_framebuffer(struct picolcd_data *data) { } #define picolcd_fbinfo(d) NULL @@ -852,6 +852,18 @@ static inline int picolcd_resume_backlight(struct picolcd_data *data) return picolcd_set_brightness(data->backlight); } +#ifdef CONFIG_PM +static void picolcd_suspend_backlight(struct picolcd_data *data) +{ + int bl_power = data->lcd_power; + if (!data->backlight) + return; + + data->backlight->props.power = FB_BLANK_POWERDOWN; + picolcd_set_brightness(data->backlight); + data->lcd_power = data->backlight->props.power = bl_power; +} +#endif /* CONFIG_PM */ #else static inline int picolcd_init_backlight(struct picolcd_data *data, struct hid_report *report) @@ -865,6 +877,9 @@ static inline int picolcd_resume_backlight(struct picolcd_data *data) { return 0; } +static inline void picolcd_suspend_backlight(struct picolcd_data *data) +{ +} #endif /* CONFIG_HID_PICOLCD_BACKLIGHT */ #ifdef CONFIG_HID_PICOLCD_LCD @@ -1098,7 +1113,7 @@ static inline int picolcd_init_leds(struct picolcd_data *data, { return 0; } -static void picolcd_exit_leds(struct picolcd_data *data) +static inline void picolcd_exit_leds(struct picolcd_data *data) { } static inline int picolcd_leds_set(struct picolcd_data *data) @@ -2214,9 +2229,18 @@ static void picolcd_exit_devfs(struct picolcd_data *data) mutex_destroy(&data->mutex_flash); } #else -#define picolcd_debug_raw_event(data, hdev, report, raw_data, size) -#define picolcd_init_devfs(data, eeprom_r, eeprom_w, flash_r, flash_w, reset) -static void picolcd_exit_devfs(struct picolcd_data *data) +static inline void picolcd_debug_raw_event(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report, + u8 *raw_data, int size) +{ +} +static inline void picolcd_init_devfs(struct picolcd_data *data, + struct hid_report *eeprom_r, struct hid_report *eeprom_w, + struct hid_report *flash_r, struct hid_report *flash_w, + struct hid_report *reset) +{ +} +static inline void picolcd_exit_devfs(struct picolcd_data *data) { } #endif /* CONFIG_DEBUG_FS */ @@ -2259,6 +2283,46 @@ static int picolcd_raw_event(struct hid_device *hdev, return 1; } +#ifdef CONFIG_PM +static int picolcd_suspend(struct hid_device *hdev, pm_message_t message) +{ + if (message.event & PM_EVENT_AUTO) + return 0; + + picolcd_suspend_backlight(hid_get_drvdata(hdev)); + dbg_hid(PICOLCD_NAME " device ready for suspend\n"); + return 0; +} + +static int picolcd_resume(struct hid_device *hdev) +{ + int ret; + ret = picolcd_resume_backlight(hid_get_drvdata(hdev)); + if (ret) + dbg_hid(PICOLCD_NAME " restoring backlight failed: %d\n", ret); + return 0; +} + +static int picolcd_reset_resume(struct hid_device *hdev) +{ + int ret; + ret = picolcd_reset(hdev); + if (ret) + dbg_hid(PICOLCD_NAME " resetting our device failed: %d\n", ret); + ret = picolcd_fb_reset(hid_get_drvdata(hdev), 0); + if (ret) + dbg_hid(PICOLCD_NAME " restoring framebuffer content failed: %d\n", ret); + ret = picolcd_resume_lcd(hid_get_drvdata(hdev)); + if (ret) + dbg_hid(PICOLCD_NAME " restoring lcd failed: %d\n", ret); + ret = picolcd_resume_backlight(hid_get_drvdata(hdev)); + if (ret) + dbg_hid(PICOLCD_NAME " restoring backlight failed: %d\n", ret); + picolcd_leds_set(hid_get_drvdata(hdev)); + return 0; +} +#endif + /* initialize keypad input device */ static int picolcd_init_keys(struct picolcd_data *data, struct hid_report *report) @@ -2544,6 +2608,11 @@ static struct hid_driver picolcd_driver = { .probe = picolcd_probe, .remove = picolcd_remove, .raw_event = picolcd_raw_event, +#ifdef CONFIG_PM + .suspend = picolcd_suspend, + .resume = picolcd_resume, + .reset_resume = picolcd_reset_resume, +#endif }; static int __init picolcd_init(void) -- cgit v1.2.2 From fe6065dc30c8cdd4beaffd6d3fa110222ad08795 Mon Sep 17 00:00:00 2001 From: Peter Hutterer Date: Tue, 2 Feb 2010 13:40:40 +1000 Subject: HID: add multi-input quirk for eGalax Touchcontroller I've got one of these devices on my desk and it seems that it suffers from the ABS_Z/ABS_RX issue that we've seen in other devices before. This patch uses the same reasoning as 9db630b48 ("HID: add multi-input quirk for NextWindow Touchscreen"). Signed-off-by: Peter Hutterer Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 3 +++ drivers/hid/usbhid/hid-quirks.c | 1 + 2 files changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 9791d0a8d16d..513e75e0f65d 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -174,6 +174,9 @@ #define USB_VENDOR_ID_DRAGONRISE 0x0079 +#define USB_VENDOR_ID_EGALAX 0x0EEF +#define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER 0x0001 + #define USB_VENDOR_ID_ELO 0x04E7 #define USB_DEVICE_ID_ELO_TS2700 0x0020 diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 7844280897d1..8ea185246a78 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -32,6 +32,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_AASHIMA, USB_DEVICE_ID_AASHIMA_PREDATOR, HID_QUIRK_BADPAD }, { USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD, HID_QUIRK_BADPAD }, { USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD, HID_QUIRK_BADPAD }, + { USB_VENDOR_ID_EGALAX, USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, -- cgit v1.2.2 From 369db2a6008e8fc3cf5006fa8aab71bd58adfc1f Mon Sep 17 00:00:00 2001 From: Rafi Rubin Date: Tue, 4 May 2010 14:20:15 -0400 Subject: HID: ntrig: add sensitivity and responsiveness support The old rejection size thresholds were too high for the 12" devices. Larger surfaces like the Dell Studio17 exacerbated the problem since contact size is reported on the same logical scale, making a contact look smaller to the larger screen. Since we have observed erroneous ghost events from these devices we still need to filter the incoming stream. The prior size threshold filter is still in place, though with defaults set to leave it off. This patch adds the two new classes of filters, those that reject live frames before activation, and those that reject empty frames until deactivation. These filters are expressed in terms of a simple state machine for clarity (I hope). The activation filter has two components, slack and size, events are discarded until either is satisfied. Slack is defined as the number of seemingly good contacts to read before accepting the stream as valid (if the threshold is reached in the middle of a frame the remainder of that frame is still discarded). The deactivation filter discards empty frames until hitting a deactivate slack. This time measured in frames. N-Trig devices emit 5-8 (observed so far) empty frames at the end of multitouch activity. Ignoring the first few enables us to safely and gracefully handle erroneous empty frames, thus preventing a change in the tool state which would otherwise result in things like broken lines or dragged objects being dropped in bad places. Also, now that devices with different logical densities have been observed, the aforementioned sizes are scaled from physical to logical scales once those scales are identified. Hopefully this should mean that a given threshold value means the same thing across differing devices. Signed-off-by: Rafi Rubin Signed-off-by: Jiri Kosina --- drivers/hid/hid-ntrig.c | 220 ++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 211 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c index 4777bbfa1cc2..227d01527c6a 100644 --- a/drivers/hid/hid-ntrig.c +++ b/drivers/hid/hid-ntrig.c @@ -24,6 +24,13 @@ #define NTRIG_DUPLICATE_USAGES 0x001 +static unsigned int min_width; +static unsigned int min_height; +static unsigned int activate_slack = 1; +static unsigned int deactivate_slack = 4; +static unsigned int activation_width = 64; +static unsigned int activation_height = 32; + struct ntrig_data { /* Incoming raw values for a single contact */ __u16 x, y, w, h; @@ -37,6 +44,28 @@ struct ntrig_data { __u8 mt_footer[4]; __u8 mt_foot_count; + + /* The current activation state. */ + __s8 act_state; + + /* Empty frames to ignore before recognizing the end of activity */ + __s8 deactivate_slack; + + /* Frames to ignore before acknowledging the start of activity */ + __s8 activate_slack; + + /* Minimum size contact to accept */ + __u16 min_width; + __u16 min_height; + + /* Threshold to override activation slack */ + __u16 activation_width; + __u16 activation_height; + + __u16 sensor_logical_width; + __u16 sensor_logical_height; + __u16 sensor_physical_width; + __u16 sensor_physical_height; }; /* @@ -49,6 +78,8 @@ static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max) { + struct ntrig_data *nd = hid_get_drvdata(hdev); + /* No special mappings needed for the pen and single touch */ if (field->physical) return 0; @@ -62,6 +93,21 @@ static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi, input_set_abs_params(hi->input, ABS_X, field->logical_minimum, field->logical_maximum, 0, 0); + + if (!nd->sensor_logical_width) { + nd->sensor_logical_width = + field->logical_maximum - + field->logical_minimum; + nd->sensor_physical_width = + field->physical_maximum - + field->physical_minimum; + nd->activation_width = activation_width * + nd->sensor_logical_width / + nd->sensor_physical_width; + nd->min_width = min_width * + nd->sensor_logical_width / + nd->sensor_physical_width; + } return 1; case HID_GD_Y: hid_map_usage(hi, usage, bit, max, @@ -69,6 +115,21 @@ static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi, input_set_abs_params(hi->input, ABS_Y, field->logical_minimum, field->logical_maximum, 0, 0); + + if (!nd->sensor_logical_height) { + nd->sensor_logical_height = + field->logical_maximum - + field->logical_minimum; + nd->sensor_physical_height = + field->physical_maximum - + field->physical_minimum; + nd->activation_height = activation_height * + nd->sensor_logical_height / + nd->sensor_physical_height; + nd->min_height = min_height * + nd->sensor_logical_height / + nd->sensor_physical_height; + } return 1; } return 0; @@ -201,20 +262,68 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field, if (nd->mt_foot_count != 4) break; - /* Pen activity signal, trigger end of touch. */ + /* Pen activity signal. */ if (nd->mt_footer[2]) { + /* + * When the pen deactivates touch, we see a + * bogus frame with ContactCount > 0. + * We can + * save a bit of work by ensuring act_state < 0 + * even if deactivation slack is turned off. + */ + nd->act_state = deactivate_slack - 1; nd->confidence = 0; break; } - /* If the contact was invalid */ - if (!(nd->confidence && nd->mt_footer[0]) - || nd->w <= 250 - || nd->h <= 190) { - nd->confidence = 0; + /* + * The first footer value indicates the presence of a + * finger. + */ + if (nd->mt_footer[0]) { + /* + * We do not want to process contacts under + * the size threshold, but do not want to + * ignore them for activation state + */ + if (nd->w < nd->min_width || + nd->h < nd->min_height) + nd->confidence = 0; + } else break; + + if (nd->act_state > 0) { + /* + * Contact meets the activation size threshold + */ + if (nd->w >= nd->activation_width && + nd->h >= nd->activation_height) { + if (nd->id) + /* + * first contact, activate now + */ + nd->act_state = 0; + else { + /* + * avoid corrupting this frame + * but ensure next frame will + * be active + */ + nd->act_state = 1; + break; + } + } else + /* + * Defer adjusting the activation state + * until the end of the frame. + */ + break; } + /* Discarding this contact */ + if (!nd->confidence) + break; + /* emit a normal (X, Y) for the first point only */ if (nd->id == 0) { /* @@ -227,8 +336,15 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field, input_event(input, EV_ABS, ABS_X, nd->x); input_event(input, EV_ABS, ABS_Y, nd->y); } + + /* Emit MT events */ input_event(input, EV_ABS, ABS_MT_POSITION_X, nd->x); input_event(input, EV_ABS, ABS_MT_POSITION_Y, nd->y); + + /* + * Translate from height and width to size + * and orientation. + */ if (nd->w > nd->h) { input_event(input, EV_ABS, ABS_MT_ORIENTATION, 1); @@ -248,12 +364,88 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field, break; case HID_DG_CONTACTCOUNT: /* End of a multitouch group */ - if (!nd->reading_mt) + if (!nd->reading_mt) /* Just to be sure */ break; nd->reading_mt = 0; - if (nd->first_contact_touch) { + + /* + * Activation state machine logic: + * + * Fundamental states: + * state > 0: Inactive + * state <= 0: Active + * state < -deactivate_slack: + * Pen termination of touch + * + * Specific values of interest + * state == activate_slack + * no valid input since the last reset + * + * state == 0 + * general operational state + * + * state == -deactivate_slack + * read sufficient empty frames to accept + * the end of input and reset + */ + + if (nd->act_state > 0) { /* Currently inactive */ + if (value) + /* + * Consider each live contact as + * evidence of intentional activity. + */ + nd->act_state = (nd->act_state > value) + ? nd->act_state - value + : 0; + else + /* + * Empty frame before we hit the + * activity threshold, reset. + */ + nd->act_state = nd->activate_slack; + + /* + * Entered this block inactive and no + * coordinates sent this frame, so hold off + * on button state. + */ + break; + } else { /* Currently active */ + if (value && nd->act_state >= + nd->deactivate_slack) + /* + * Live point: clear accumulated + * deactivation count. + */ + nd->act_state = 0; + else if (nd->act_state <= nd->deactivate_slack) + /* + * We've consumed the deactivation + * slack, time to deactivate and reset. + */ + nd->act_state = + nd->activate_slack; + else { /* Move towards deactivation */ + nd->act_state--; + break; + } + } + + if (nd->first_contact_touch && nd->act_state <= 0) { + /* + * Check to see if we're ready to start + * emitting touch events. + * + * Note: activation slack will decrease over + * the course of the frame, and it will be + * inconsistent from the start to the end of + * the frame. However if the frame starts + * with slack, first_contact_touch will still + * be 0 and we will not get to this point. + */ input_report_key(input, BTN_TOOL_DOUBLETAP, 1); input_report_key(input, BTN_TOUCH, 1); } else { @@ -263,7 +455,7 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field, break; default: - /* fallback to the generic hidinput handling */ + /* fall-back to the generic hidinput handling */ return 0; } } @@ -293,6 +485,16 @@ static int ntrig_probe(struct hid_device *hdev, const struct hid_device_id *id) } nd->reading_mt = 0; + nd->min_width = 0; + nd->min_height = 0; + nd->activate_slack = activate_slack; + nd->act_state = activate_slack; + nd->deactivate_slack = -deactivate_slack; + nd->sensor_logical_width = 0; + nd->sensor_logical_height = 0; + nd->sensor_physical_width = 0; + nd->sensor_physical_height = 0; + hid_set_drvdata(hdev, nd); ret = hid_parse(hdev); -- cgit v1.2.2 From eab32f5f65574c7484ed883c2245758f5a98878c Mon Sep 17 00:00:00 2001 From: Rafi Rubin Date: Tue, 4 May 2010 14:20:17 -0400 Subject: HID: ntrig: add sysfs access to filter parameters This should make it a little more convenient to tweak the filtering parameters on the fly. Also unlike load-time parameters, this provides independent tuning for each device conntected. Signed-off-by: Rafi Rubin Signed-off-by: Jiri Kosina --- drivers/hid/hid-ntrig.c | 285 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 285 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c index 227d01527c6a..2c08365f3720 100644 --- a/drivers/hid/hid-ntrig.c +++ b/drivers/hid/hid-ntrig.c @@ -68,6 +68,287 @@ struct ntrig_data { __u16 sensor_physical_height; }; + +static ssize_t show_phys_width(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct ntrig_data *nd = hid_get_drvdata(hdev); + + return sprintf(buf, "%d\n", nd->sensor_physical_width); +} + +static DEVICE_ATTR(sensor_physical_width, S_IRUGO, show_phys_width, NULL); + +static ssize_t show_phys_height(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct ntrig_data *nd = hid_get_drvdata(hdev); + + return sprintf(buf, "%d\n", nd->sensor_physical_height); +} + +static DEVICE_ATTR(sensor_physical_height, S_IRUGO, show_phys_height, NULL); + +static ssize_t show_log_width(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct ntrig_data *nd = hid_get_drvdata(hdev); + + return sprintf(buf, "%d\n", nd->sensor_logical_width); +} + +static DEVICE_ATTR(sensor_logical_width, S_IRUGO, show_log_width, NULL); + +static ssize_t show_log_height(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct ntrig_data *nd = hid_get_drvdata(hdev); + + return sprintf(buf, "%d\n", nd->sensor_logical_height); +} + +static DEVICE_ATTR(sensor_logical_height, S_IRUGO, show_log_height, NULL); + +static ssize_t show_min_width(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct ntrig_data *nd = hid_get_drvdata(hdev); + + return sprintf(buf, "%d\n", nd->min_width * + nd->sensor_physical_width / + nd->sensor_logical_width); +} + +static ssize_t set_min_width(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct ntrig_data *nd = hid_get_drvdata(hdev); + + unsigned long val; + + if (strict_strtoul(buf, 0, &val)) + return -EINVAL; + + if (val > nd->sensor_physical_width) + return -EINVAL; + + nd->min_width = val * nd->sensor_logical_width / + nd->sensor_physical_width; + + return count; +} + +static DEVICE_ATTR(min_width, S_IWUSR | S_IRUGO, show_min_width, set_min_width); + +static ssize_t show_min_height(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct ntrig_data *nd = hid_get_drvdata(hdev); + + return sprintf(buf, "%d\n", nd->min_height * + nd->sensor_physical_height / + nd->sensor_logical_height); +} + +static ssize_t set_min_height(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct ntrig_data *nd = hid_get_drvdata(hdev); + + unsigned long val; + + if (strict_strtoul(buf, 0, &val)) + return -EINVAL; + + if (val > nd->sensor_physical_height) + return -EINVAL; + + nd->min_height = val * nd->sensor_logical_height / + nd->sensor_physical_height; + + return count; +} + +static DEVICE_ATTR(min_height, S_IWUSR | S_IRUGO, show_min_height, + set_min_height); + +static ssize_t show_activate_slack(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct ntrig_data *nd = hid_get_drvdata(hdev); + + return sprintf(buf, "%d\n", nd->activate_slack); +} + +static ssize_t set_activate_slack(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct ntrig_data *nd = hid_get_drvdata(hdev); + + unsigned long val; + + if (strict_strtoul(buf, 0, &val)) + return -EINVAL; + + if (val > 0x7f) + return -EINVAL; + + nd->activate_slack = val; + + return count; +} + +static DEVICE_ATTR(activate_slack, S_IWUSR | S_IRUGO, show_activate_slack, + set_activate_slack); + +static ssize_t show_activation_width(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct ntrig_data *nd = hid_get_drvdata(hdev); + + return sprintf(buf, "%d\n", nd->activation_width * + nd->sensor_physical_width / + nd->sensor_logical_width); +} + +static ssize_t set_activation_width(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct ntrig_data *nd = hid_get_drvdata(hdev); + + unsigned long val; + + if (strict_strtoul(buf, 0, &val)) + return -EINVAL; + + if (val > nd->sensor_physical_width) + return -EINVAL; + + nd->activation_width = val * nd->sensor_logical_width / + nd->sensor_physical_width; + + return count; +} + +static DEVICE_ATTR(activation_width, S_IWUSR | S_IRUGO, show_activation_width, + set_activation_width); + +static ssize_t show_activation_height(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct ntrig_data *nd = hid_get_drvdata(hdev); + + return sprintf(buf, "%d\n", nd->activation_height * + nd->sensor_physical_height / + nd->sensor_logical_height); +} + +static ssize_t set_activation_height(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct ntrig_data *nd = hid_get_drvdata(hdev); + + unsigned long val; + + if (strict_strtoul(buf, 0, &val)) + return -EINVAL; + + if (val > nd->sensor_physical_height) + return -EINVAL; + + nd->activation_height = val * nd->sensor_logical_height / + nd->sensor_physical_height; + + return count; +} + +static DEVICE_ATTR(activation_height, S_IWUSR | S_IRUGO, + show_activation_height, set_activation_height); + +static ssize_t show_deactivate_slack(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct ntrig_data *nd = hid_get_drvdata(hdev); + + return sprintf(buf, "%d\n", -nd->deactivate_slack); +} + +static ssize_t set_deactivate_slack(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct ntrig_data *nd = hid_get_drvdata(hdev); + + unsigned long val; + + if (strict_strtoul(buf, 0, &val)) + return -EINVAL; + + /* + * No more than 8 terminal frames have been observed so far + * and higher slack is highly likely to leave the single + * touch emulation stuck down. + */ + if (val > 7) + return -EINVAL; + + nd->deactivate_slack = -val; + + return count; +} + +static DEVICE_ATTR(deactivate_slack, S_IWUSR | S_IRUGO, show_deactivate_slack, + set_deactivate_slack); + +static struct attribute *sysfs_attrs[] = { + &dev_attr_sensor_physical_width.attr, + &dev_attr_sensor_physical_height.attr, + &dev_attr_sensor_logical_width.attr, + &dev_attr_sensor_logical_height.attr, + &dev_attr_min_height.attr, + &dev_attr_min_width.attr, + &dev_attr_activate_slack.attr, + &dev_attr_activation_width.attr, + &dev_attr_activation_height.attr, + &dev_attr_deactivate_slack.attr, + NULL +}; + +static struct attribute_group ntrig_attribute_group = { + .attrs = sysfs_attrs +}; + /* * this driver is aimed at two firmware versions in circulation: * - dual pen/finger single touch @@ -546,6 +827,8 @@ static int ntrig_probe(struct hid_device *hdev, const struct hid_device_id *id) if (report) usbhid_submit_report(hdev, report, USB_DIR_OUT); + ret = sysfs_create_group(&hdev->dev.kobj, + &ntrig_attribute_group); return 0; err_free: @@ -555,6 +838,8 @@ err_free: static void ntrig_remove(struct hid_device *hdev) { + sysfs_remove_group(&hdev->dev.kobj, + &ntrig_attribute_group); hid_hw_stop(hdev); kfree(hid_get_drvdata(hdev)); } -- cgit v1.2.2 From ab3f4980ec62b907e697ff0934a8e1d076a6d46d Mon Sep 17 00:00:00 2001 From: Rafi Rubin Date: Tue, 4 May 2010 14:20:16 -0400 Subject: HID: ntrig: add filtering module parameters Signed-off-by: Rafi Rubin Signed-off-by: Jiri Kosina --- drivers/hid/hid-ntrig.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c index 2c08365f3720..b6b0caeeac58 100644 --- a/drivers/hid/hid-ntrig.c +++ b/drivers/hid/hid-ntrig.c @@ -25,11 +25,32 @@ #define NTRIG_DUPLICATE_USAGES 0x001 static unsigned int min_width; +module_param(min_width, uint, 0644); +MODULE_PARM_DESC(min_width, "Minimum touch contact width to accept."); + static unsigned int min_height; +module_param(min_height, uint, 0644); +MODULE_PARM_DESC(min_height, "Minimum touch contact height to accept."); + static unsigned int activate_slack = 1; +module_param(activate_slack, uint, 0644); +MODULE_PARM_DESC(activate_slack, "Number of touch frames to ignore at " + "the start of touch input."); + static unsigned int deactivate_slack = 4; +module_param(deactivate_slack, uint, 0644); +MODULE_PARM_DESC(deactivate_slack, "Number of empty frames to ignore before " + "deactivating touch."); + static unsigned int activation_width = 64; +module_param(activation_width, uint, 0644); +MODULE_PARM_DESC(activation_width, "Width threshold to immediately start " + "processing touch events."); + static unsigned int activation_height = 32; +module_param(activation_height, uint, 0644); +MODULE_PARM_DESC(activation_height, "Height threshold to immediately start " + "processing touch events."); struct ntrig_data { /* Incoming raw values for a single contact */ -- cgit v1.2.2 From 81cd584394e54514c57b18e0f23e0b5ca40070b2 Mon Sep 17 00:00:00 2001 From: Antonio Ospite Date: Fri, 30 Apr 2010 21:49:58 +0200 Subject: HID: hidraw: fix indentation Signed-off-by: Antonio Ospite Signed-off-by: Jiri Kosina --- drivers/hid/hidraw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index d04476700b7b..a758ead3df61 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -310,7 +310,7 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, -EFAULT : len; break; } - } + } ret = -ENOTTY; } -- cgit v1.2.2 From 3a370ca1dcf8c80aff7a0a21d6b0f50ca2a151e9 Mon Sep 17 00:00:00 2001 From: Don Prince Date: Wed, 12 May 2010 15:18:59 +0200 Subject: HID: Prodikeys PC-MIDI HID Driver A specialised HID driver for the Creative Prodikeys PC-MIDI USB Keyboard. The Prodikeys PC-MIDI is a multifunction keyboard comprising a qwerty keyboard, multimedia keys and a touch sensitive musical keyboard. The specialised HID driver adds full support for the musical keyboard and extra multimedia keys which are not currently handled by the default HID driver. The specialised HID driver interfaces with ALSA, and presents the midi keyboard as a rawmidi device. Sustain duration, octave shifting and the midi output channel can be read/written form userspace via sysfs. Signed-off-by: Don Prince ALSA parts: Acked-by: Clemens Ladisch Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 16 + drivers/hid/Makefile | 1 + drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 3 + drivers/hid/hid-prodikeys.c | 910 ++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 931 insertions(+) create mode 100644 drivers/hid/hid-prodikeys.c (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 71d4c0703629..0c3eee94f5a7 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -100,6 +100,22 @@ config HID_CHICONY ---help--- Support for Chicony Tactical pad. +config HID_PRODIKEYS + tristate "Prodikeys PC-MIDI Keyboard support" if EMBEDDED + depends on USB_HID && SND + select SND_RAWMIDI + default !EMBEDDED + ---help--- + Support for Prodikeys PC-MIDI Keyboard device support. + Say Y here to enable support for this device. + - Prodikeys PC-MIDI keyboard. + The Prodikeys PC-MIDI acts as a USB Audio device, with one MIDI + input and one MIDI output. These MIDI jacks appear as + a sound "card" in the ALSA sound system. + Note: if you say N here, this device will still function as a basic + multimedia keyboard, but will lack support for the musical keyboard + and some additional multimedia keys. + config HID_CYPRESS tristate "Cypress" if EMBEDDED depends on USB_HID diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index 0b2618f092ca..f637b388030f 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o obj-$(CONFIG_HID_MOSART) += hid-mosart.o obj-$(CONFIG_HID_NTRIG) += hid-ntrig.o obj-$(CONFIG_HID_ORTEK) += hid-ortek.o +obj-$(CONFIG_HID_PRODIKEYS) += hid-prodikeys.o obj-$(CONFIG_HID_QUANTA) += hid-quanta.o obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 143e788b729b..1c57a9391c8f 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1293,6 +1293,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_3) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 09d27649a0f7..50134431aeee 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -148,6 +148,9 @@ #define USB_DEVICE_ID_CODEMERCS_IOW_FIRST 0x1500 #define USB_DEVICE_ID_CODEMERCS_IOW_LAST 0x15ff +#define USB_VENDOR_ID_CREATIVELABS 0x041e +#define USB_DEVICE_ID_PRODIKEYS_PCMIDI 0x2801 + #define USB_VENDOR_ID_CYGNAL 0x10c4 #define USB_DEVICE_ID_CYGNAL_RADIO_SI470X 0x818a diff --git a/drivers/hid/hid-prodikeys.c b/drivers/hid/hid-prodikeys.c new file mode 100644 index 000000000000..845f428b8090 --- /dev/null +++ b/drivers/hid/hid-prodikeys.c @@ -0,0 +1,910 @@ +/* + * HID driver for the Prodikeys PC-MIDI Keyboard + * providing midi & extra multimedia keys functionality + * + * Copyright (c) 2009 Don Prince + * + * Controls for Octave Shift Up/Down, Channel, and + * Sustain Duration available via sysfs. + * + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "usbhid/usbhid.h" +#include "hid-ids.h" + + +#define pk_debug(format, arg...) \ + pr_debug("hid-prodikeys: " format "\n" , ## arg) +#define pk_error(format, arg...) \ + pr_err("hid-prodikeys: " format "\n" , ## arg) + +struct pcmidi_snd; + +struct pk_device { + unsigned long quirks; + + struct hid_device *hdev; + struct pcmidi_snd *pm; /* pcmidi device context */ +}; + +struct pcmidi_snd; + +struct pcmidi_sustain { + unsigned long in_use; + struct pcmidi_snd *pm; + struct timer_list timer; + unsigned char status; + unsigned char note; + unsigned char velocity; +}; + +#define PCMIDI_SUSTAINED_MAX 32 +struct pcmidi_snd { + struct pk_device *pk; + unsigned short ifnum; + struct hid_report *pcmidi_report6; + struct input_dev *input_ep82; + unsigned short midi_mode; + unsigned short midi_sustain_mode; + unsigned short midi_sustain; + unsigned short midi_channel; + short midi_octave; + struct pcmidi_sustain sustained_notes[PCMIDI_SUSTAINED_MAX]; + unsigned short fn_state; + unsigned short last_key[24]; + spinlock_t rawmidi_in_lock; + struct snd_card *card; + struct snd_rawmidi *rwmidi; + struct snd_rawmidi_substream *in_substream; + struct snd_rawmidi_substream *out_substream; + unsigned long in_triggered; + unsigned long out_active; +}; + +#define PK_QUIRK_NOGET 0x00010000 +#define PCMIDI_MIDDLE_C 60 +#define PCMIDI_CHANNEL_MIN 0 +#define PCMIDI_CHANNEL_MAX 15 +#define PCMIDI_OCTAVE_MIN (-2) +#define PCMIDI_OCTAVE_MAX 2 +#define PCMIDI_SUSTAIN_MIN 0 +#define PCMIDI_SUSTAIN_MAX 5000 + +static const char shortname[] = "PC-MIDI"; +static const char longname[] = "Prodikeys PC-MIDI Keyboard"; + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; +static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; +static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; + +module_param_array(index, int, NULL, 0444); +module_param_array(id, charp, NULL, 0444); +module_param_array(enable, bool, NULL, 0444); +MODULE_PARM_DESC(index, "Index value for the PC-MIDI virtual audio driver"); +MODULE_PARM_DESC(id, "ID string for the PC-MIDI virtual audio driver"); +MODULE_PARM_DESC(enable, "Enable for the PC-MIDI virtual audio driver"); + + +/* Output routine for the sysfs channel file */ +static ssize_t show_channel(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev); + + dbg_hid("pcmidi sysfs read channel=%u\n", pk->pm->midi_channel); + + return sprintf(buf, "%u (min:%u, max:%u)\n", pk->pm->midi_channel, + PCMIDI_CHANNEL_MIN, PCMIDI_CHANNEL_MAX); +} + +/* Input routine for the sysfs channel file */ +static ssize_t store_channel(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev); + + unsigned channel = 0; + + if (sscanf(buf, "%u", &channel) > 0 && channel <= PCMIDI_CHANNEL_MAX) { + dbg_hid("pcmidi sysfs write channel=%u\n", channel); + pk->pm->midi_channel = channel; + return strlen(buf); + } + return -EINVAL; +} + +static DEVICE_ATTR(channel, S_IRUGO | S_IWUGO, show_channel, + store_channel); + +static struct device_attribute *sysfs_device_attr_channel = { + &dev_attr_channel, + }; + +/* Output routine for the sysfs sustain file */ +static ssize_t show_sustain(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev); + + dbg_hid("pcmidi sysfs read sustain=%u\n", pk->pm->midi_sustain); + + return sprintf(buf, "%u (off:%u, max:%u (ms))\n", pk->pm->midi_sustain, + PCMIDI_SUSTAIN_MIN, PCMIDI_SUSTAIN_MAX); +} + +/* Input routine for the sysfs sustain file */ +static ssize_t store_sustain(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev); + + unsigned sustain = 0; + + if (sscanf(buf, "%u", &sustain) > 0 && sustain <= PCMIDI_SUSTAIN_MAX) { + dbg_hid("pcmidi sysfs write sustain=%u\n", sustain); + pk->pm->midi_sustain = sustain; + pk->pm->midi_sustain_mode = + (0 == sustain || !pk->pm->midi_mode) ? 0 : 1; + return strlen(buf); + } + return -EINVAL; +} + +static DEVICE_ATTR(sustain, S_IRUGO | S_IWUGO, show_sustain, + store_sustain); + +static struct device_attribute *sysfs_device_attr_sustain = { + &dev_attr_sustain, + }; + +/* Output routine for the sysfs octave file */ +static ssize_t show_octave(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev); + + dbg_hid("pcmidi sysfs read octave=%d\n", pk->pm->midi_octave); + + return sprintf(buf, "%d (min:%d, max:%d)\n", pk->pm->midi_octave, + PCMIDI_OCTAVE_MIN, PCMIDI_OCTAVE_MAX); +} + +/* Input routine for the sysfs octave file */ +static ssize_t store_octave(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct hid_device *hdev = container_of(dev, struct hid_device, dev); + struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev); + + int octave = 0; + + if (sscanf(buf, "%d", &octave) > 0 && + octave >= PCMIDI_OCTAVE_MIN && octave <= PCMIDI_OCTAVE_MAX) { + dbg_hid("pcmidi sysfs write octave=%d\n", octave); + pk->pm->midi_octave = octave; + return strlen(buf); + } + return -EINVAL; +} + +static DEVICE_ATTR(octave, S_IRUGO | S_IWUGO, show_octave, + store_octave); + +static struct device_attribute *sysfs_device_attr_octave = { + &dev_attr_octave, + }; + + +static void pcmidi_send_note(struct pcmidi_snd *pm, + unsigned char status, unsigned char note, unsigned char velocity) +{ + unsigned long flags; + unsigned char buffer[3]; + + buffer[0] = status; + buffer[1] = note; + buffer[2] = velocity; + + spin_lock_irqsave(&pm->rawmidi_in_lock, flags); + + if (!pm->in_substream) + goto drop_note; + if (!test_bit(pm->in_substream->number, &pm->in_triggered)) + goto drop_note; + + snd_rawmidi_receive(pm->in_substream, buffer, 3); + +drop_note: + spin_unlock_irqrestore(&pm->rawmidi_in_lock, flags); + + return; +} + +void pcmidi_sustained_note_release(unsigned long data) +{ + struct pcmidi_sustain *pms = (struct pcmidi_sustain *)data; + + pcmidi_send_note(pms->pm, pms->status, pms->note, pms->velocity); + pms->in_use = 0; +} + +void init_sustain_timers(struct pcmidi_snd *pm) +{ + struct pcmidi_sustain *pms; + unsigned i; + + for (i = 0; i < PCMIDI_SUSTAINED_MAX; i++) { + pms = &pm->sustained_notes[i]; + pms->in_use = 0; + pms->pm = pm; + setup_timer(&pms->timer, pcmidi_sustained_note_release, + (unsigned long)pms); + } +} + +void stop_sustain_timers(struct pcmidi_snd *pm) +{ + struct pcmidi_sustain *pms; + unsigned i; + + for (i = 0; i < PCMIDI_SUSTAINED_MAX; i++) { + pms = &pm->sustained_notes[i]; + pms->in_use = 1; + del_timer_sync(&pms->timer); + } +} + +static int pcmidi_get_output_report(struct pcmidi_snd *pm) +{ + struct hid_device *hdev = pm->pk->hdev; + struct hid_report *report; + + list_for_each_entry(report, + &hdev->report_enum[HID_OUTPUT_REPORT].report_list, list) { + if (!(6 == report->id)) + continue; + + if (report->maxfield < 1) { + dev_err(&hdev->dev, "output report is empty\n"); + break; + } + if (report->field[0]->report_count != 2) { + dev_err(&hdev->dev, "field count too low\n"); + break; + } + pm->pcmidi_report6 = report; + return 0; + } + /* should never get here */ + return -ENODEV; +} + +static void pcmidi_submit_output_report(struct pcmidi_snd *pm, int state) +{ + struct hid_device *hdev = pm->pk->hdev; + struct hid_report *report = pm->pcmidi_report6; + report->field[0]->value[0] = 0x01; + report->field[0]->value[1] = state; + + usbhid_submit_report(hdev, report, USB_DIR_OUT); +} + +static int pcmidi_handle_report1(struct pcmidi_snd *pm, u8 *data) +{ + u32 bit_mask; + + bit_mask = data[1]; + bit_mask = (bit_mask << 8) | data[2]; + bit_mask = (bit_mask << 8) | data[3]; + + dbg_hid("pcmidi mode: %d\n", pm->midi_mode); + + /*KEY_MAIL or octave down*/ + if (pm->midi_mode && bit_mask == 0x004000) { + /* octave down */ + pm->midi_octave--; + if (pm->midi_octave < -2) + pm->midi_octave = -2; + dbg_hid("pcmidi mode: %d octave: %d\n", + pm->midi_mode, pm->midi_octave); + return 1; + } + /*KEY_WWW or sustain*/ + else if (pm->midi_mode && bit_mask == 0x000004) { + /* sustain on/off*/ + pm->midi_sustain_mode ^= 0x1; + return 1; + } + + return 0; /* continue key processing */ +} + +static int pcmidi_handle_report3(struct pcmidi_snd *pm, u8 *data, int size) +{ + struct pcmidi_sustain *pms; + unsigned i, j; + unsigned char status, note, velocity; + + unsigned num_notes = (size-1)/2; + for (j = 0; j < num_notes; j++) { + note = data[j*2+1]; + velocity = data[j*2+2]; + + if (note < 0x81) { /* note on */ + status = 128 + 16 + pm->midi_channel; /* 1001nnnn */ + note = note - 0x54 + PCMIDI_MIDDLE_C + + (pm->midi_octave * 12); + if (0 == velocity) + velocity = 1; /* force note on */ + } else { /* note off */ + status = 128 + pm->midi_channel; /* 1000nnnn */ + note = note - 0x94 + PCMIDI_MIDDLE_C + + (pm->midi_octave*12); + + if (pm->midi_sustain_mode) { + for (i = 0; i < PCMIDI_SUSTAINED_MAX; i++) { + pms = &pm->sustained_notes[i]; + if (!pms->in_use) { + pms->status = status; + pms->note = note; + pms->velocity = velocity; + pms->in_use = 1; + + mod_timer(&pms->timer, + jiffies + + msecs_to_jiffies(pm->midi_sustain)); + return 1; + } + } + } + } + pcmidi_send_note(pm, status, note, velocity); + } + + return 1; +} + +static int pcmidi_handle_report4(struct pcmidi_snd *pm, u8 *data) +{ + unsigned key; + u32 bit_mask; + u32 bit_index; + + bit_mask = data[1]; + bit_mask = (bit_mask << 8) | data[2]; + bit_mask = (bit_mask << 8) | data[3]; + + /* break keys */ + for (bit_index = 0; bit_index < 24; bit_index++) { + key = pm->last_key[bit_index]; + if (!((0x01 << bit_index) & bit_mask)) { + input_event(pm->input_ep82, EV_KEY, + pm->last_key[bit_index], 0); + pm->last_key[bit_index] = 0; + } + } + + /* make keys */ + for (bit_index = 0; bit_index < 24; bit_index++) { + key = 0; + switch ((0x01 << bit_index) & bit_mask) { + case 0x000010: /* Fn lock*/ + pm->fn_state ^= 0x000010; + if (pm->fn_state) + pcmidi_submit_output_report(pm, 0xc5); + else + pcmidi_submit_output_report(pm, 0xc6); + continue; + case 0x020000: /* midi launcher..send a key (qwerty) or not? */ + pcmidi_submit_output_report(pm, 0xc1); + pm->midi_mode ^= 0x01; + + dbg_hid("pcmidi mode: %d\n", pm->midi_mode); + continue; + case 0x100000: /* KEY_MESSENGER or octave up */ + dbg_hid("pcmidi mode: %d\n", pm->midi_mode); + if (pm->midi_mode) { + pm->midi_octave++; + if (pm->midi_octave > 2) + pm->midi_octave = 2; + dbg_hid("pcmidi mode: %d octave: %d\n", + pm->midi_mode, pm->midi_octave); + continue; + } else + key = KEY_MESSENGER; + break; + case 0x400000: + key = KEY_CALENDAR; + break; + case 0x080000: + key = KEY_ADDRESSBOOK; + break; + case 0x040000: + key = KEY_DOCUMENTS; + break; + case 0x800000: + key = KEY_WORDPROCESSOR; + break; + case 0x200000: + key = KEY_SPREADSHEET; + break; + case 0x010000: + key = KEY_COFFEE; + break; + case 0x000100: + key = KEY_HELP; + break; + case 0x000200: + key = KEY_SEND; + break; + case 0x000400: + key = KEY_REPLY; + break; + case 0x000800: + key = KEY_FORWARDMAIL; + break; + case 0x001000: + key = KEY_NEW; + break; + case 0x002000: + key = KEY_OPEN; + break; + case 0x004000: + key = KEY_CLOSE; + break; + case 0x008000: + key = KEY_SAVE; + break; + case 0x000001: + key = KEY_UNDO; + break; + case 0x000002: + key = KEY_REDO; + break; + case 0x000004: + key = KEY_SPELLCHECK; + break; + case 0x000008: + key = KEY_PRINT; + break; + } + if (key) { + input_event(pm->input_ep82, EV_KEY, key, 1); + pm->last_key[bit_index] = key; + } + } + + return 1; +} + +int pcmidi_handle_report( + struct pcmidi_snd *pm, unsigned report_id, u8 *data, int size) +{ + int ret = 0; + + switch (report_id) { + case 0x01: /* midi keys (qwerty)*/ + ret = pcmidi_handle_report1(pm, data); + break; + case 0x03: /* midi keyboard (musical)*/ + ret = pcmidi_handle_report3(pm, data, size); + break; + case 0x04: /* multimedia/midi keys (qwerty)*/ + ret = pcmidi_handle_report4(pm, data); + break; + } + return ret; +} + +void pcmidi_setup_extra_keys(struct pcmidi_snd *pm, struct input_dev *input) +{ + /* reassigned functionality for N/A keys + MY PICTURES => KEY_WORDPROCESSOR + MY MUSIC=> KEY_SPREADSHEET + */ + unsigned int keys[] = { + KEY_FN, + KEY_MESSENGER, KEY_CALENDAR, + KEY_ADDRESSBOOK, KEY_DOCUMENTS, + KEY_WORDPROCESSOR, + KEY_SPREADSHEET, + KEY_COFFEE, + KEY_HELP, KEY_SEND, + KEY_REPLY, KEY_FORWARDMAIL, + KEY_NEW, KEY_OPEN, + KEY_CLOSE, KEY_SAVE, + KEY_UNDO, KEY_REDO, + KEY_SPELLCHECK, KEY_PRINT, + 0 + }; + + unsigned int *pkeys = &keys[0]; + unsigned short i; + + if (pm->ifnum != 1) /* only set up ONCE for interace 1 */ + return; + + pm->input_ep82 = input; + + for (i = 0; i < 24; i++) + pm->last_key[i] = 0; + + while (*pkeys != 0) { + set_bit(*pkeys, pm->input_ep82->keybit); + ++pkeys; + } +} + +static int pcmidi_set_operational(struct pcmidi_snd *pm) +{ + if (pm->ifnum != 1) + return 0; /* only set up ONCE for interace 1 */ + + pcmidi_get_output_report(pm); + pcmidi_submit_output_report(pm, 0xc1); + return 0; +} + +static int pcmidi_snd_free(struct snd_device *dev) +{ + return 0; +} + +static int pcmidi_in_open(struct snd_rawmidi_substream *substream) +{ + struct pcmidi_snd *pm = substream->rmidi->private_data; + + dbg_hid("pcmidi in open\n"); + pm->in_substream = substream; + return 0; +} + +static int pcmidi_in_close(struct snd_rawmidi_substream *substream) +{ + dbg_hid("pcmidi in close\n"); + return 0; +} + +static void pcmidi_in_trigger(struct snd_rawmidi_substream *substream, int up) +{ + struct pcmidi_snd *pm = substream->rmidi->private_data; + + dbg_hid("pcmidi in trigger %d\n", up); + + pm->in_triggered = up; +} + +static struct snd_rawmidi_ops pcmidi_in_ops = { + .open = pcmidi_in_open, + .close = pcmidi_in_close, + .trigger = pcmidi_in_trigger +}; + +int pcmidi_snd_initialise(struct pcmidi_snd *pm) +{ + static int dev; + struct snd_card *card; + struct snd_rawmidi *rwmidi; + int err; + + static struct snd_device_ops ops = { + .dev_free = pcmidi_snd_free, + }; + + if (pm->ifnum != 1) + return 0; /* only set up midi device ONCE for interace 1 */ + + if (dev >= SNDRV_CARDS) + return -ENODEV; + + if (!enable[dev]) { + dev++; + return -ENOENT; + } + + /* Setup sound card */ + + err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); + if (err < 0) { + pk_error("failed to create pc-midi sound card\n"); + err = -ENOMEM; + goto fail; + } + pm->card = card; + + /* Setup sound device */ + err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, pm, &ops); + if (err < 0) { + pk_error("failed to create pc-midi sound device: error %d\n", + err); + goto fail; + } + + strncpy(card->driver, shortname, sizeof(card->driver)); + strncpy(card->shortname, shortname, sizeof(card->shortname)); + strncpy(card->longname, longname, sizeof(card->longname)); + + /* Set up rawmidi */ + err = snd_rawmidi_new(card, card->shortname, 0, + 0, 1, &rwmidi); + if (err < 0) { + pk_error("failed to create pc-midi rawmidi device: error %d\n", + err); + goto fail; + } + pm->rwmidi = rwmidi; + strncpy(rwmidi->name, card->shortname, sizeof(rwmidi->name)); + rwmidi->info_flags = SNDRV_RAWMIDI_INFO_INPUT; + rwmidi->private_data = pm; + + snd_rawmidi_set_ops(rwmidi, SNDRV_RAWMIDI_STREAM_INPUT, + &pcmidi_in_ops); + + snd_card_set_dev(card, &pm->pk->hdev->dev); + + /* create sysfs variables */ + err = device_create_file(&pm->pk->hdev->dev, + sysfs_device_attr_channel); + if (err < 0) { + pk_error("failed to create sysfs attribute channel: error %d\n", + err); + goto fail; + } + + err = device_create_file(&pm->pk->hdev->dev, + sysfs_device_attr_sustain); + if (err < 0) { + pk_error("failed to create sysfs attribute sustain: error %d\n", + err); + goto fail_attr_sustain; + } + + err = device_create_file(&pm->pk->hdev->dev, + sysfs_device_attr_octave); + if (err < 0) { + pk_error("failed to create sysfs attribute octave: error %d\n", + err); + goto fail_attr_octave; + } + + spin_lock_init(&pm->rawmidi_in_lock); + + init_sustain_timers(pm); + pcmidi_set_operational(pm); + + /* register it */ + err = snd_card_register(card); + if (err < 0) { + pk_error("failed to register pc-midi sound card: error %d\n", + err); + goto fail_register; + } + + dbg_hid("pcmidi_snd_initialise finished ok\n"); + return 0; + +fail_register: + stop_sustain_timers(pm); + device_remove_file(&pm->pk->hdev->dev, sysfs_device_attr_octave); +fail_attr_octave: + device_remove_file(&pm->pk->hdev->dev, sysfs_device_attr_sustain); +fail_attr_sustain: + device_remove_file(&pm->pk->hdev->dev, sysfs_device_attr_channel); +fail: + if (pm->card) { + snd_card_free(pm->card); + pm->card = NULL; + } + return err; +} + +int pcmidi_snd_terminate(struct pcmidi_snd *pm) +{ + if (pm->card) { + stop_sustain_timers(pm); + + device_remove_file(&pm->pk->hdev->dev, + sysfs_device_attr_channel); + device_remove_file(&pm->pk->hdev->dev, + sysfs_device_attr_sustain); + device_remove_file(&pm->pk->hdev->dev, + sysfs_device_attr_octave); + + snd_card_disconnect(pm->card); + snd_card_free_when_closed(pm->card); + } + + return 0; +} + +/* + * PC-MIDI report descriptor for report id is wrong. + */ +static void pk_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int rsize) +{ + if (rsize == 178 && + rdesc[111] == 0x06 && rdesc[112] == 0x00 && + rdesc[113] == 0xff) { + dev_info(&hdev->dev, "fixing up pc-midi keyboard report " + "descriptor\n"); + + rdesc[144] = 0x18; /* report 4: was 0x10 report count */ + } +} + +static int pk_input_mapping(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev); + struct pcmidi_snd *pm; + + pm = pk->pm; + + if (HID_UP_MSVENDOR == (usage->hid & HID_USAGE_PAGE) && + 1 == pm->ifnum) { + pcmidi_setup_extra_keys(pm, hi->input); + return 0; + } + + return 0; +} + + +static int pk_raw_event(struct hid_device *hdev, struct hid_report *report, + u8 *data, int size) +{ + struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev); + int ret = 0; + + if (1 == pk->pm->ifnum) { + if (report->id == data[0]) + switch (report->id) { + case 0x01: /* midi keys (qwerty)*/ + case 0x03: /* midi keyboard (musical)*/ + case 0x04: /* extra/midi keys (qwerty)*/ + ret = pcmidi_handle_report(pk->pm, + report->id, data, size); + break; + } + } + + return ret; +} + +static int pk_probe(struct hid_device *hdev, const struct hid_device_id *id) +{ + int ret; + struct usb_interface *intf = to_usb_interface(hdev->dev.parent); + unsigned short ifnum = intf->cur_altsetting->desc.bInterfaceNumber; + unsigned long quirks = id->driver_data; + struct pk_device *pk; + struct pcmidi_snd *pm = NULL; + + pk = kzalloc(sizeof(*pk), GFP_KERNEL); + if (pk == NULL) { + dev_err(&hdev->dev, "prodikeys: can't alloc descriptor\n"); + return -ENOMEM; + } + + pk->hdev = hdev; + + pm = kzalloc(sizeof(*pm), GFP_KERNEL); + if (pm == NULL) { + dev_err(&hdev->dev, + "prodikeys: can't alloc descriptor\n"); + ret = -ENOMEM; + goto err_free; + } + + pm->pk = pk; + pk->pm = pm; + pm->ifnum = ifnum; + + hid_set_drvdata(hdev, pk); + + ret = hid_parse(hdev); + if (ret) { + dev_err(&hdev->dev, "prodikeys: hid parse failed\n"); + goto err_free; + } + + if (quirks & PK_QUIRK_NOGET) { /* hid_parse cleared all the quirks */ + hdev->quirks |= HID_QUIRK_NOGET; + } + + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + if (ret) { + dev_err(&hdev->dev, "prodikeys: hw start failed\n"); + goto err_free; + } + + ret = pcmidi_snd_initialise(pm); + if (ret < 0) + goto err_stop; + + return 0; +err_stop: + hid_hw_stop(hdev); +err_free: + if (pm != NULL) + kfree(pm); + + kfree(pk); + return ret; +} + +static void pk_remove(struct hid_device *hdev) +{ + struct pk_device *pk = (struct pk_device *)hid_get_drvdata(hdev); + struct pcmidi_snd *pm; + + pm = pk->pm; + if (pm) { + pcmidi_snd_terminate(pm); + kfree(pm); + } + + hid_hw_stop(hdev); + + kfree(pk); +} + +static const struct hid_device_id pk_devices[] = { + {HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, + USB_DEVICE_ID_PRODIKEYS_PCMIDI), + .driver_data = PK_QUIRK_NOGET}, + { } +}; +MODULE_DEVICE_TABLE(hid, pk_devices); + +static struct hid_driver pk_driver = { + .name = "prodikeys", + .id_table = pk_devices, + .report_fixup = pk_report_fixup, + .input_mapping = pk_input_mapping, + .raw_event = pk_raw_event, + .probe = pk_probe, + .remove = pk_remove, +}; + +static int pk_init(void) +{ + int ret; + + ret = hid_register_driver(&pk_driver); + if (ret) + printk(KERN_ERR "can't register prodikeys driver\n"); + + return ret; +} + +static void pk_exit(void) +{ + hid_unregister_driver(&pk_driver); +} + +module_init(pk_init); +module_exit(pk_exit); +MODULE_LICENSE("GPL"); -- cgit v1.2.2 From 95736de984dec5b80ea9d6640d4d55ca8ff98db4 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Wed, 12 May 2010 15:27:00 +0200 Subject: HID: make Prodikeys driver standalone config option Analogically for other full-fledged HID drivers, make the Prodikeys driver independent on EMBEDDED. Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 0c3eee94f5a7..26c6f10afcb8 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -101,10 +101,9 @@ config HID_CHICONY Support for Chicony Tactical pad. config HID_PRODIKEYS - tristate "Prodikeys PC-MIDI Keyboard support" if EMBEDDED + tristate "Prodikeys PC-MIDI Keyboard support" depends on USB_HID && SND select SND_RAWMIDI - default !EMBEDDED ---help--- Support for Prodikeys PC-MIDI Keyboard device support. Say Y here to enable support for this device. -- cgit v1.2.2 From 23d021167eebf0df5ccadf4f8de5ccb8d4ac2904 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Wed, 12 May 2010 16:01:26 +0200 Subject: HID: magicmouse: fix input registration When HIDRAW is not set, hid_hw_start() returns ENODEV as no subsystem has claimed the magicmouse device, and probe routine bails out. Which is not what we want. This happens because magicmouse driver is instantiating the connection to Input subsystem itself, and since commit 28918c211d86b ("HID: magicmouse: fix oops after device removal") the HID core is not registering input device itself. Fix this by letting HID core register the input device (so that hid_hw_start() succeeds, as the device is claimed by at least one subsystem) and de-register it again later before proceeding with proper input setup. Reported-by: Justin P. Mattock Signed-off-by: Jiri Kosina --- drivers/hid/hid-magicmouse.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index 0d471fc2ab82..f10d56a15f21 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -354,12 +354,15 @@ static int magicmouse_probe(struct hid_device *hdev, goto err_free; } - ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_HIDINPUT); + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); if (ret) { dev_err(&hdev->dev, "magicmouse hw start failed\n"); goto err_free; } + /* we are handling the input ourselves */ + hidinput_disconnect(hdev); + report = hid_register_report(hdev, HID_INPUT_REPORT, TOUCH_REPORT_ID); if (!report) { dev_err(&hdev->dev, "unable to register touch report\n"); -- cgit v1.2.2 From 1721a238ba5df9e870ed952464d38714261f5be9 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 15 May 2010 23:19:30 +0200 Subject: HID: Use kmemdup Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // Signed-off-by: Julia Lawall Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index b9f99f9c4b2f..c9eb2d08f396 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -653,10 +653,9 @@ int hid_parse_report(struct hid_device *device, __u8 *start, if (device->driver->report_fixup) device->driver->report_fixup(device, start, size); - device->rdesc = kmalloc(size, GFP_KERNEL); + device->rdesc = kmemdup(start, size, GFP_KERNEL); if (device->rdesc == NULL) return -ENOMEM; - memcpy(device->rdesc, start, size); device->rsize = size; parser = vmalloc(sizeof(struct hid_parser)); -- cgit v1.2.2 From a9885c8f7bf62e251fc178f838b9f0ee897c158a Mon Sep 17 00:00:00 2001 From: Don Prince Date: Fri, 14 May 2010 17:30:59 +0100 Subject: HID: Zydacron Remote Control driver A specialised HID driver for the Zydacron Remote Control (usb id: 13ec:0006). The specialised HID driver adds support for the buttons which are not currently handled by the default HID driver. Signed-off-by: Don Prince Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 7 +++++++ drivers/hid/Makefile | 1 + drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 3 +++ 4 files changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 631ede69c012..3cf69a0a8b77 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -380,6 +380,13 @@ config ZEROPLUS_FF Say Y here if you have a Zeroplus based game controller and want to have force feedback support for it. +config HID_ZYDACRON + tristate "Zydacron remote control support" if EMBEDDED + depends on USB_HID + default !EMBEDDED + ---help--- + Support for Zydacron remote control. + endmenu endif # HID_SUPPORT diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index 0b2618f092ca..d1f1b448977d 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -54,6 +54,7 @@ obj-$(CONFIG_HID_THRUSTMASTER) += hid-tmff.o obj-$(CONFIG_HID_TOPSEED) += hid-topseed.o obj-$(CONFIG_HID_TWINHAN) += hid-twinhan.o obj-$(CONFIG_HID_ZEROPLUS) += hid-zpff.o +obj-$(CONFIG_HID_ZYDACRON) += hid-zydacron.o obj-$(CONFIG_HID_WACOM) += hid-wacom.o obj-$(CONFIG_USB_HID) += usbhid/ diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index c9eb2d08f396..7c77c64d3e99 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1364,6 +1364,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) }, { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) }, { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ZYDACRON, USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) }, { } diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 513e75e0f65d..30cba94cfb0c 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -481,6 +481,9 @@ #define USB_VENDOR_ID_ZEROPLUS 0x0c12 +#define USB_VENDOR_ID_ZYDACRON 0x13EC +#define USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL 0x0006 + #define USB_VENDOR_ID_KYE 0x0458 #define USB_DEVICE_ID_KYE_ERGO_525V 0x0087 #define USB_DEVICE_ID_KYE_GPEN_560 0x5003 -- cgit v1.2.2 From aeacb6fd30c800e8229905eac7023777a472d772 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 15 May 2010 11:46:36 +0200 Subject: HID: picolcd: Eliminate use after free The skip label frees resp, which has not been allocated at the point of this goto and then does a break, based on the fact that err is non-zero. This is replaced by a break directly. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @free@ expression E; position p; @@ kfree@p(E) @@ expression free.E, subE<=free.E, E1; position free.p; @@ kfree@p(E) ... ( subE = E1 | * E ) // Signed-off-by: Julia Lawall Signed-off-by: Jiri Kosina --- drivers/hid/hid-picolcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c index 95253b310541..7aabf65c48ef 100644 --- a/drivers/hid/hid-picolcd.c +++ b/drivers/hid/hid-picolcd.c @@ -1616,7 +1616,7 @@ static ssize_t _picolcd_flash_write(struct picolcd_data *data, int report_id, raw_data[len_off] = s > 32 ? 32 : s; if (copy_from_user(raw_data+len_off+1, u, raw_data[len_off])) { err = -EFAULT; - goto skip; + break; } resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off+1+raw_data[len_off]); -- cgit v1.2.2 From b355850ba383232d4e0e357c1cda8cb7bfcc60bc Mon Sep 17 00:00:00 2001 From: Don Prince Date: Mon, 17 May 2010 11:42:39 +0100 Subject: HID: hid-samsung: add support for Creative Desktop Wireless 6000 Add support for the multimedia buttons of the Creative Desktop Wireless 6000 keyboard/mouse combo which are not currently handled by the default/samsung HID driver. Signed-off-by: Don Prince Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 2 +- drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 1 + drivers/hid/hid-samsung.c | 102 ++++++++++++++++++++++++++++++++++++++++------ 4 files changed, 93 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 3cf69a0a8b77..ac8e12d00c0f 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -273,7 +273,7 @@ config HID_SAMSUNG depends on USB_HID default !EMBEDDED ---help--- - Support for Samsung InfraRed remote control. + Support for Samsung InfraRed remote control or keyboards. config HID_SONY tristate "Sony" if EMBEDDED diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 7c77c64d3e99..c625c3419a8c 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1346,6 +1346,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) }, { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 30cba94cfb0c..ba071b1aba3e 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -415,6 +415,7 @@ #define USB_VENDOR_ID_SAMSUNG 0x0419 #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001 +#define USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE 0x0600 #define USB_VENDOR_ID_SONY 0x054c #define USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE 0x024b diff --git a/drivers/hid/hid-samsung.c b/drivers/hid/hid-samsung.c index 510dd1340597..869a5acfc0ba 100644 --- a/drivers/hid/hid-samsung.c +++ b/drivers/hid/hid-samsung.c @@ -7,6 +7,18 @@ * Copyright (c) 2006-2007 Jiri Kosina * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby + * Copyright (c) 2010 Don Prince + * + * + * This driver supports several HID devices: + * + * [0419:0001] Samsung IrDA remote controller (reports as Cypress USB Mouse). + * various hid report fixups for different variants. + * + * [0419:0600] Creative Desktop Wireless 6000 keyboard/mouse combo + * several key mappings used from the consumer usage page + * deviate from the USB HUT 1.12 standard. + * */ /* @@ -17,14 +29,13 @@ */ #include +#include #include #include #include "hid-ids.h" /* - * Samsung IrDA remote controller (reports as Cypress USB Mouse). - * * There are several variants for 0419:0001: * * 1. 184 byte report descriptor @@ -43,21 +54,21 @@ * 4. 171 byte report descriptor * Report #3 has an array field with logical range 0..1 instead of 1..3. */ -static inline void samsung_dev_trace(struct hid_device *hdev, +static inline void samsung_irda_dev_trace(struct hid_device *hdev, unsigned int rsize) { dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report " "descriptor\n", rsize); } -static void samsung_report_fixup(struct hid_device *hdev, __u8 *rdesc, +static void samsung_irda_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int rsize) { if (rsize == 184 && rdesc[175] == 0x25 && rdesc[176] == 0x40 && rdesc[177] == 0x75 && rdesc[178] == 0x30 && rdesc[179] == 0x95 && rdesc[180] == 0x01 && rdesc[182] == 0x40) { - samsung_dev_trace(hdev, 184); + samsung_irda_dev_trace(hdev, 184); rdesc[176] = 0xff; rdesc[178] = 0x08; rdesc[180] = 0x06; @@ -65,24 +76,87 @@ static void samsung_report_fixup(struct hid_device *hdev, __u8 *rdesc, } else if (rsize == 203 && rdesc[192] == 0x15 && rdesc[193] == 0x0 && rdesc[194] == 0x25 && rdesc[195] == 0x12) { - samsung_dev_trace(hdev, 203); + samsung_irda_dev_trace(hdev, 203); rdesc[193] = 0x1; rdesc[195] = 0xf; } else if (rsize == 135 && rdesc[124] == 0x15 && rdesc[125] == 0x0 && rdesc[126] == 0x25 && rdesc[127] == 0x11) { - samsung_dev_trace(hdev, 135); + samsung_irda_dev_trace(hdev, 135); rdesc[125] = 0x1; rdesc[127] = 0xe; } else if (rsize == 171 && rdesc[160] == 0x15 && rdesc[161] == 0x0 && rdesc[162] == 0x25 && rdesc[163] == 0x01) { - samsung_dev_trace(hdev, 171); + samsung_irda_dev_trace(hdev, 171); rdesc[161] = 0x1; rdesc[163] = 0x3; } } +#define samsung_kbd_mouse_map_key_clear(c) \ + hid_map_usage_clear(hi, usage, bit, max, EV_KEY, (c)) + +static int samsung_kbd_mouse_input_mapping(struct hid_device *hdev, + struct hid_input *hi, struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + struct usb_interface *intf = to_usb_interface(hdev->dev.parent); + unsigned short ifnum = intf->cur_altsetting->desc.bInterfaceNumber; + + if (1 != ifnum || HID_UP_CONSUMER != (usage->hid & HID_USAGE_PAGE)) + return 0; + + dbg_hid("samsung wireless keyboard/mouse input mapping event [0x%x]\n", + usage->hid & HID_USAGE); + + switch (usage->hid & HID_USAGE) { + /* report 2 */ + case 0x0b5: samsung_kbd_mouse_map_key_clear(KEY_NEXTSONG); break; + case 0x0b6: samsung_kbd_mouse_map_key_clear(KEY_PREVIOUSSONG); break; + case 0x0b7: samsung_kbd_mouse_map_key_clear(KEY_STOPCD); break; + case 0x0cd: samsung_kbd_mouse_map_key_clear(KEY_PLAYPAUSE); break; + case 0x0e2: samsung_kbd_mouse_map_key_clear(KEY_MUTE); break; + case 0x0e9: samsung_kbd_mouse_map_key_clear(KEY_VOLUMEUP); break; + case 0x0ea: samsung_kbd_mouse_map_key_clear(KEY_VOLUMEDOWN); break; + case 0x183: samsung_kbd_mouse_map_key_clear(KEY_MEDIA); break; + case 0x195: samsung_kbd_mouse_map_key_clear(KEY_EMAIL); break; + case 0x196: samsung_kbd_mouse_map_key_clear(KEY_CALC); break; + case 0x197: samsung_kbd_mouse_map_key_clear(KEY_COMPUTER); break; + case 0x22b: samsung_kbd_mouse_map_key_clear(KEY_SEARCH); break; + case 0x22c: samsung_kbd_mouse_map_key_clear(KEY_WWW); break; + case 0x22d: samsung_kbd_mouse_map_key_clear(KEY_BACK); break; + case 0x22e: samsung_kbd_mouse_map_key_clear(KEY_FORWARD); break; + case 0x22f: samsung_kbd_mouse_map_key_clear(KEY_FAVORITES); break; + case 0x230: samsung_kbd_mouse_map_key_clear(KEY_REFRESH); break; + case 0x231: samsung_kbd_mouse_map_key_clear(KEY_STOP); break; + default: + return 0; + } + + return 1; +} + +static void samsung_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int rsize) +{ + if (USB_DEVICE_ID_SAMSUNG_IR_REMOTE == hdev->product) + samsung_irda_report_fixup(hdev, rdesc, rsize); +} + +static int samsung_input_mapping(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + int ret = 0; + + if (USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE == hdev->product) + ret = samsung_kbd_mouse_input_mapping(hdev, + hi, field, usage, bit, max); + + return ret; +} + static int samsung_probe(struct hid_device *hdev, const struct hid_device_id *id) { @@ -95,10 +169,12 @@ static int samsung_probe(struct hid_device *hdev, goto err_free; } - if (hdev->rsize == 184) { - /* disable hidinput, force hiddev */ - cmask = (cmask & ~HID_CONNECT_HIDINPUT) | - HID_CONNECT_HIDDEV_FORCE; + if (USB_DEVICE_ID_SAMSUNG_IR_REMOTE == hdev->product) { + if (hdev->rsize == 184) { + /* disable hidinput, force hiddev */ + cmask = (cmask & ~HID_CONNECT_HIDINPUT) | + HID_CONNECT_HIDDEV_FORCE; + } } ret = hid_hw_start(hdev, cmask); @@ -114,6 +190,7 @@ err_free: static const struct hid_device_id samsung_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) }, { } }; MODULE_DEVICE_TABLE(hid, samsung_devices); @@ -122,6 +199,7 @@ static struct hid_driver samsung_driver = { .name = "samsung", .id_table = samsung_devices, .report_fixup = samsung_report_fixup, + .input_mapping = samsung_input_mapping, .probe = samsung_probe, }; -- cgit v1.2.2 From d0742abaa1c396a26bb3d3ce2732988cd3faa020 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Mon, 17 May 2010 20:57:02 +0200 Subject: HID: add omitted hid-zydacron.c file Commit a9885c8f7bf62e251fc178 ("HID: Zydacron Remote Control driver") added hid-zydracon driver by Don Prince, but mistakenly omitted hid-zydracon.c file itself. Properly add the file. Reported-by: Don Prince Signed-off-by: Jiri Kosina --- drivers/hid/hid-zydacron.c | 237 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 237 insertions(+) create mode 100644 drivers/hid/hid-zydacron.c (limited to 'drivers') diff --git a/drivers/hid/hid-zydacron.c b/drivers/hid/hid-zydacron.c new file mode 100644 index 000000000000..9e8d35a203e4 --- /dev/null +++ b/drivers/hid/hid-zydacron.c @@ -0,0 +1,237 @@ +/* +* HID driver for zydacron remote control +* +* Copyright (c) 2010 Don Prince +*/ + +/* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the Free +* Software Foundation; either version 2 of the License, or (at your option) +* any later version. +*/ + +#include +#include +#include + +#include "hid-ids.h" + +struct zc_device { + struct input_dev *input_ep81; + unsigned short last_key[4]; +}; + + +/* +* Zydacron remote control has an invalid HID report descriptor, +* that needs fixing before we can parse it. +*/ +static void zc_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int rsize) +{ + if (rsize >= 253 && + rdesc[0x96] == 0xbc && rdesc[0x97] == 0xff && + rdesc[0xca] == 0xbc && rdesc[0xcb] == 0xff && + rdesc[0xe1] == 0xbc && rdesc[0xe2] == 0xff) { + dev_info(&hdev->dev, + "fixing up zydacron remote control report " + "descriptor\n"); + rdesc[0x96] = rdesc[0xca] = rdesc[0xe1] = 0x0c; + rdesc[0x97] = rdesc[0xcb] = rdesc[0xe2] = 0x00; + } +} + +#define zc_map_key_clear(c) \ + hid_map_usage_clear(hi, usage, bit, max, EV_KEY, (c)) + +static int zc_input_mapping(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + int i; + struct zc_device *zc = hid_get_drvdata(hdev); + zc->input_ep81 = hi->input; + + if ((usage->hid & HID_USAGE_PAGE) != HID_UP_CONSUMER) + return 0; + + dbg_hid("zynacron input mapping event [0x%x]\n", + usage->hid & HID_USAGE); + + switch (usage->hid & HID_USAGE) { + /* report 2 */ + case 0x10: + zc_map_key_clear(KEY_MODE); + break; + case 0x30: + zc_map_key_clear(KEY_SCREEN); + break; + case 0x70: + zc_map_key_clear(KEY_INFO); + break; + /* report 3 */ + case 0x04: + zc_map_key_clear(KEY_RADIO); + break; + /* report 4 */ + case 0x0d: + zc_map_key_clear(KEY_PVR); + break; + case 0x25: + zc_map_key_clear(KEY_TV); + break; + case 0x47: + zc_map_key_clear(KEY_AUDIO); + break; + case 0x49: + zc_map_key_clear(KEY_AUX); + break; + case 0x4a: + zc_map_key_clear(KEY_VIDEO); + break; + case 0x48: + zc_map_key_clear(KEY_DVD); + break; + case 0x24: + zc_map_key_clear(KEY_MENU); + break; + case 0x32: + zc_map_key_clear(KEY_TEXT); + break; + default: + return 0; + } + + for (i = 0; i < 4; i++) + zc->last_key[i] = 0; + + return 1; +} + +static int zc_raw_event(struct hid_device *hdev, struct hid_report *report, + u8 *data, int size) +{ + struct zc_device *zc = hid_get_drvdata(hdev); + int ret = 0; + unsigned key; + unsigned short index; + + if (report->id == data[0]) { + + /* break keys */ + for (index = 0; index < 4; index++) { + key = zc->last_key[index]; + if (key) { + input_event(zc->input_ep81, EV_KEY, key, 0); + zc->last_key[index] = 0; + } + } + + key = 0; + switch (report->id) { + case 0x02: + case 0x03: + switch (data[1]) { + case 0x10: + key = KEY_MODE; + index = 0; + break; + case 0x30: + key = KEY_SCREEN; + index = 1; + break; + case 0x70: + key = KEY_INFO; + index = 2; + break; + case 0x04: + key = KEY_RADIO; + index = 3; + break; + } + + if (key) { + input_event(zc->input_ep81, EV_KEY, key, 1); + zc->last_key[index] = key; + } + + ret = 1; + break; + } + } + + return ret; +} + +static int zc_probe(struct hid_device *hdev, const struct hid_device_id *id) +{ + int ret; + struct zc_device *zc; + + zc = kzalloc(sizeof(*zc), GFP_KERNEL); + if (zc == NULL) { + dev_err(&hdev->dev, "zydacron: can't alloc descriptor\n"); + return -ENOMEM; + } + + hid_set_drvdata(hdev, zc); + + ret = hid_parse(hdev); + if (ret) { + dev_err(&hdev->dev, "zydacron: parse failed\n"); + goto err_free; + } + + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + if (ret) { + dev_err(&hdev->dev, "zydacron: hw start failed\n"); + goto err_free; + } + + return 0; +err_free: + kfree(zc); + + return ret; +} + +static void zc_remove(struct hid_device *hdev) +{ + struct zc_device *zc = hid_get_drvdata(hdev); + + hid_hw_stop(hdev); + + if (NULL != zc) + kfree(zc); +} + +static const struct hid_device_id zc_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_ZYDACRON, USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL) }, + { } +}; +MODULE_DEVICE_TABLE(hid, zc_devices); + +static struct hid_driver zc_driver = { + .name = "zydacron", + .id_table = zc_devices, + .report_fixup = zc_report_fixup, + .input_mapping = zc_input_mapping, + .raw_event = zc_raw_event, + .probe = zc_probe, + .remove = zc_remove, +}; + +static int __init zc_init(void) +{ + return hid_register_driver(&zc_driver); +} + +static void __exit zc_exit(void) +{ + hid_unregister_driver(&zc_driver); +} + +module_init(zc_init); +module_exit(zc_exit); +MODULE_LICENSE("GPL"); -- cgit v1.2.2 From 117ea33a18392685b92928bbaa4e84dbc5be8f93 Mon Sep 17 00:00:00 2001 From: Don Prince Date: Mon, 17 May 2010 20:18:21 +0100 Subject: HID: hid-samsung: remove redundant key mappings Remove 7 redundant key mappings from Desktop Wireless 6000 that are already handled by the default hid code. Reported-by: Robert Schedel Signed-off-by: Don Prince Signed-off-by: Jiri Kosina --- drivers/hid/hid-samsung.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-samsung.c b/drivers/hid/hid-samsung.c index 869a5acfc0ba..bda0fd60c98d 100644 --- a/drivers/hid/hid-samsung.c +++ b/drivers/hid/hid-samsung.c @@ -112,13 +112,6 @@ static int samsung_kbd_mouse_input_mapping(struct hid_device *hdev, switch (usage->hid & HID_USAGE) { /* report 2 */ - case 0x0b5: samsung_kbd_mouse_map_key_clear(KEY_NEXTSONG); break; - case 0x0b6: samsung_kbd_mouse_map_key_clear(KEY_PREVIOUSSONG); break; - case 0x0b7: samsung_kbd_mouse_map_key_clear(KEY_STOPCD); break; - case 0x0cd: samsung_kbd_mouse_map_key_clear(KEY_PLAYPAUSE); break; - case 0x0e2: samsung_kbd_mouse_map_key_clear(KEY_MUTE); break; - case 0x0e9: samsung_kbd_mouse_map_key_clear(KEY_VOLUMEUP); break; - case 0x0ea: samsung_kbd_mouse_map_key_clear(KEY_VOLUMEDOWN); break; case 0x183: samsung_kbd_mouse_map_key_clear(KEY_MEDIA); break; case 0x195: samsung_kbd_mouse_map_key_clear(KEY_EMAIL); break; case 0x196: samsung_kbd_mouse_map_key_clear(KEY_CALC); break; -- cgit v1.2.2 From a8ab5d58b0238b8199cc699b8dff7c5e1da24138 Mon Sep 17 00:00:00 2001 From: Alan Ott Date: Sun, 16 May 2010 18:07:09 -0400 Subject: HID: hidraw: Use Interrupt Endpoint for OUT Transfers if Available This patch makes the hidraw driver use the first Interrupt OUT endpoint for HID transfers to the device if such an endpoint exists. This is consistent with the behavior of the hiddev driver, and the logic is similar. From the USB HID specification: The Interrupt Out pipe is optional. If a device declares an Interrupt Out endpoint then Output reports are transmitted by the host to the device through the Interrupt Out endpoint. If no Interrupt Out endpoint is declared then Output reports are transmitted to a device through the Control endpoint, using Set_Report(Output) requests. Signed-off-by: Alan Ott Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hid-core.c | 40 ++++++++++++++++++++++++++++++---------- 1 file changed, 30 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 245aef0de8f2..f9640a362caa 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -807,16 +807,36 @@ static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t co struct usb_host_interface *interface = intf->cur_altsetting; int ret; - ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - HID_REQ_SET_REPORT, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - ((report_type + 1) << 8) | *buf, - interface->desc.bInterfaceNumber, buf + 1, count - 1, - USB_CTRL_SET_TIMEOUT); - - /* count also the report id */ - if (ret > 0) - ret++; + if (usbhid->urbout) { + int actual_length; + int skipped_report_id = 0; + if (buf[0] == 0x0) { + /* Don't send the Report ID */ + buf++; + count--; + skipped_report_id = 1; + } + ret = usb_interrupt_msg(dev, usbhid->urbout->pipe, + buf, count, &actual_length, + USB_CTRL_SET_TIMEOUT); + /* return the number of bytes transferred */ + if (ret == 0) { + ret = actual_length; + /* count also the report id */ + if (skipped_report_id) + ret++; + } + } else { + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + HID_REQ_SET_REPORT, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + ((report_type + 1) << 8) | *buf, + interface->desc.bInterfaceNumber, buf + 1, count - 1, + USB_CTRL_SET_TIMEOUT); + /* count also the report id */ + if (ret > 0) + ret++; + } return ret; } -- cgit v1.2.2 From 00237bc5204c43f67b2e68546012d7bd27efc1b6 Mon Sep 17 00:00:00 2001 From: Stefan Achatz Date: Sat, 8 May 2010 17:20:38 +0200 Subject: HID: roccat: Correctly mark init and exit functions Added the __init and __exit hints for module functions. Signed-off-by: Stefan Achatz Signed-off-by: Jiri Kosina --- drivers/hid/hid-roccat-kone.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-roccat-kone.c b/drivers/hid/hid-roccat-kone.c index 7b1178496621..a41df9ab2877 100644 --- a/drivers/hid/hid-roccat-kone.c +++ b/drivers/hid/hid-roccat-kone.c @@ -989,12 +989,12 @@ static struct hid_driver kone_driver = { .raw_event = kone_raw_event }; -static int kone_init(void) +static int __init kone_init(void) { return hid_register_driver(&kone_driver); } -static void kone_exit(void) +static void __exit kone_exit(void) { hid_unregister_driver(&kone_driver); } -- cgit v1.2.2 From 73b3577d5dc80bf5f079ddd5c0449459a1997765 Mon Sep 17 00:00:00 2001 From: Stefan Achatz Date: Wed, 19 May 2010 13:53:22 +0200 Subject: HID: roccat: fix special button support Added new data and changed workaround for abnormal button behaviour according to new gained knowledge about Roccat Kone device. Signed-off-by: Stefan Achatz Signed-off-by: Jiri Kosina --- drivers/hid/hid-roccat-kone.c | 11 ++++++----- drivers/hid/hid-roccat-kone.h | 19 ++++++++++++++++--- 2 files changed, 22 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-roccat-kone.c b/drivers/hid/hid-roccat-kone.c index a41df9ab2877..5d9ced0defa5 100644 --- a/drivers/hid/hid-roccat-kone.c +++ b/drivers/hid/hid-roccat-kone.c @@ -928,14 +928,15 @@ static int kone_raw_event(struct hid_device *hdev, struct hid_report *report, return 0; /* - * Firmware 1.38 introduced new behaviour for tilt buttons. - * Pressed tilt button is reported in each movement event. + * Firmware 1.38 introduced new behaviour for tilt and special buttons. + * Pressed button is reported in each movement event. * Workaround sends only one event per press. */ - if (kone->last_tilt_state == event->tilt) - event->tilt = 0; + if (memcmp(&kone->last_mouse_event.tilt, &event->tilt, 5)) + memcpy(&kone->last_mouse_event, event, + sizeof(struct kone_mouse_event)); else - kone->last_tilt_state = event->tilt; + memset(&event->tilt, 0, 5); /* * handle special events and keep actual profile and dpi values diff --git a/drivers/hid/hid-roccat-kone.h b/drivers/hid/hid-roccat-kone.h index ee6898c9d92c..13309544b6fa 100644 --- a/drivers/hid/hid-roccat-kone.h +++ b/drivers/hid/hid-roccat-kone.h @@ -83,6 +83,17 @@ enum kone_button_info_types { kone_button_info_type_multimedia_volume_down = 0x27 }; +enum kone_button_info_numbers { + kone_button_top = 1, + kone_button_wheel_tilt_left = 2, + kone_button_wheel_tilt_right = 3, + kone_button_forward = 4, + kone_button_backward = 5, + kone_button_middle = 6, + kone_button_plus = 7, + kone_button_minus = 8, +}; + struct kone_light_info { uint8_t number; /* number of light 1-5 */ uint8_t mod; /* 1 = on, 2 = off */ @@ -120,6 +131,7 @@ struct kone_profile { uint8_t light_effect_speed; /* range 0-255 */ struct kone_light_info light_infos[5]; + /* offset is kone_button_info_numbers - 1 */ struct kone_button_info button_infos[8]; uint16_t checksum; /* \brief holds checksum of struct */ @@ -165,7 +177,7 @@ enum kone_mouse_events { /* TODO clarify meaning and occurence of kone_mouse_event_calibration */ kone_mouse_event_calibration = 0xc0, kone_mouse_event_call_overlong_macro = 0xe0, - /* switch events notify if user changed values wiht mousebutton click */ + /* switch events notify if user changed values with mousebutton click */ kone_mouse_event_switch_dpi = 0xf0, kone_mouse_event_switch_profile = 0xf1 }; @@ -188,8 +200,9 @@ struct kone_device { * is no way of getting this information from the device on demand */ int actual_profile, actual_dpi; - /* Used for neutralizing abnormal tilt button behaviour */ - int last_tilt_state; + /* Used for neutralizing abnormal button behaviour */ + struct kone_mouse_event last_mouse_event; + /* * It's unlikely that multiple sysfs attributes are accessed at a time, * so only one mutex is used to secure hardware access and profiles and -- cgit v1.2.2 From 48e70804d37f9c52aab7c4ce7b7ab7bc7b800099 Mon Sep 17 00:00:00 2001 From: Stefan Achatz Date: Tue, 18 May 2010 18:31:04 +0200 Subject: HID: roccat: refactor special event handling As special events are reported along with hid event information all events are now processed further by standard handler. Also cleaned up this code. Signed-off-by: Stefan Achatz Signed-off-by: Jiri Kosina --- drivers/hid/hid-roccat-kone.c | 54 ++++++++++++++++--------------------------- 1 file changed, 20 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-roccat-kone.c b/drivers/hid/hid-roccat-kone.c index 5d9ced0defa5..8f35fe22f419 100644 --- a/drivers/hid/hid-roccat-kone.c +++ b/drivers/hid/hid-roccat-kone.c @@ -912,6 +912,24 @@ static void kone_remove(struct hid_device *hdev) hid_hw_stop(hdev); } +/* handle special events and keep actual profile and dpi values up to date */ +static void kone_keep_values_up_to_date(struct kone_device *kone, + struct kone_mouse_event const *event) +{ + switch (event->event) { + case kone_mouse_event_switch_profile: + case kone_mouse_event_osd_profile: + kone->actual_profile = event->value; + kone->actual_dpi = kone->profiles[kone->actual_profile - 1]. + startup_dpi; + break; + case kone_mouse_event_switch_dpi: + case kone_mouse_event_osd_dpi: + kone->actual_dpi = event->value; + break; + } +} + /* * Is called for keyboard- and mousepart. * Only mousepart gets informations about special events in its extended event @@ -938,41 +956,9 @@ static int kone_raw_event(struct hid_device *hdev, struct hid_report *report, else memset(&event->tilt, 0, 5); - /* - * handle special events and keep actual profile and dpi values - * up to date - */ - switch (event->event) { - case kone_mouse_event_osd_dpi: - dev_dbg(&hdev->dev, "osd dpi event. actual dpi %d\n", - event->value); - return 1; /* return 1 if event was handled */ - case kone_mouse_event_switch_dpi: - kone->actual_dpi = event->value; - dev_dbg(&hdev->dev, "switched dpi to %d\n", event->value); - return 1; - case kone_mouse_event_osd_profile: - dev_dbg(&hdev->dev, "osd profile event. actual profile %d\n", - event->value); - return 1; - case kone_mouse_event_switch_profile: - kone->actual_profile = event->value; - kone->actual_dpi = kone->profiles[kone->actual_profile - 1]. - startup_dpi; - dev_dbg(&hdev->dev, "switched profile to %d\n", event->value); - return 1; - case kone_mouse_event_call_overlong_macro: - dev_dbg(&hdev->dev, "overlong macro called, button %d %s/%s\n", - event->macro_key, - kone->profiles[kone->actual_profile - 1]. - button_infos[event->macro_key].macro_set_name, - kone->profiles[kone->actual_profile - 1]. - button_infos[event->macro_key].macro_name - ); - return 1; - } + kone_keep_values_up_to_date(kone, event); - return 0; /* do further processing */ + return 0; /* always do further processing */ } static const struct hid_device_id kone_devices[] = { -- cgit v1.2.2 From 1f749d8d5f92c275e35cdcd1fdcb7c8298157118 Mon Sep 17 00:00:00 2001 From: Stefan Achatz Date: Wed, 12 May 2010 17:43:34 +0200 Subject: HID: roccat: cleanup preprocessor macros Removed useless preprocessor macros and renamed remaining one to be more qualified. Signed-off-by: Stefan Achatz Signed-off-by: Jiri Kosina --- drivers/hid/hid-roccat-kone.c | 8 ++++---- drivers/hid/hid-roccat-kone.h | 5 +---- 2 files changed, 5 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-roccat-kone.c b/drivers/hid/hid-roccat-kone.c index 8f35fe22f419..66e694054ba2 100644 --- a/drivers/hid/hid-roccat-kone.c +++ b/drivers/hid/hid-roccat-kone.c @@ -630,7 +630,7 @@ static ssize_t kone_sysfs_set_startup_profile(struct device *dev, static ssize_t kone_sysfs_show_driver_version(struct device *dev, struct device_attribute *attr, char *buf) { - return snprintf(buf, PAGE_SIZE, DRIVER_VERSION "\n"); + return snprintf(buf, PAGE_SIZE, ROCCAT_KONE_DRIVER_VERSION "\n"); } /* @@ -989,6 +989,6 @@ static void __exit kone_exit(void) module_init(kone_init); module_exit(kone_exit); -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE(DRIVER_LICENSE); +MODULE_AUTHOR("Stefan Achatz"); +MODULE_DESCRIPTION("USB Roccat Kone driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/hid/hid-roccat-kone.h b/drivers/hid/hid-roccat-kone.h index 13309544b6fa..b413b10a7f8a 100644 --- a/drivers/hid/hid-roccat-kone.h +++ b/drivers/hid/hid-roccat-kone.h @@ -14,10 +14,7 @@ #include -#define DRIVER_VERSION "v0.3.0" -#define DRIVER_AUTHOR "Stefan Achatz" -#define DRIVER_DESC "USB Roccat Kone driver" -#define DRIVER_LICENSE "GPL v2" +#define ROCCAT_KONE_DRIVER_VERSION "v0.3.1" #pragma pack(push) #pragma pack(1) -- cgit v1.2.2 From 73d5e8f77e88a4d3a154dfdbb4ed2cf461b7bf21 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 21 May 2010 13:15:17 +0200 Subject: HID: fix up 'EMBEDDED' mess in Kconfig The whole point of making some of the drivers automatically selected unless 'EMBEDDED' was to handle quirks transparently after their separation from the generic core. Over time, some of the later-added quirks grew into more standalone drivers, implementing non-trivial features a being larger than a few bytes of code. In addition to that, some of the standalone drivers don't make sense for 99.9% of the users, as they are very specific to rare devices. Therefore build by default in only those drivers which - we historically used to support even before quirk separation from the core code - are isolated enough and likely to hit quite large portion of the users anyway (Microsoft, Logitech) Reported-by: Linus Torvalds Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 47 ++++++++++++++++------------------------------- 1 file changed, 16 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 339c1eaa55ac..76ba59b9fea1 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -129,9 +129,8 @@ config HID_CYPRESS Support for cypress mouse and barcode readers. config HID_DRAGONRISE - tristate "DragonRise Inc. support" if EMBEDDED + tristate "DragonRise Inc. support" depends on USB_HID - default !EMBEDDED ---help--- Say Y here if you have DragonRise Inc.game controllers. @@ -147,7 +146,7 @@ config HID_EGALAX tristate "eGalax multi-touch panel" depends on USB_HID ---help--- - Support for the eGalax dual-touch panel + Support for the eGalax dual-touch panel. config HID_EZKEY tristate "Ezkey" if EMBEDDED @@ -164,16 +163,14 @@ config HID_KYE Support for Kye/Genius Ergo Mouse. config HID_GYRATION - tristate "Gyration" if EMBEDDED + tristate "Gyration" depends on USB_HID - default !EMBEDDED ---help--- Support for Gyration remote control. config HID_TWINHAN - tristate "Twinhan" if EMBEDDED + tristate "Twinhan" depends on USB_HID - default !EMBEDDED ---help--- Support for Twinhan IR remote control. @@ -260,16 +257,14 @@ config HID_NTRIG Support for N-Trig touch screen. config HID_ORTEK - tristate "Ortek" if EMBEDDED + tristate "Ortek" depends on USB_HID - default !EMBEDDED ---help--- Support for Ortek WKB-2000 wireless keyboard + mouse trackpad. config HID_PANTHERLORD - tristate "Pantherlord support" if EMBEDDED + tristate "Pantherlord support" depends on USB_HID - default !EMBEDDED ---help--- Say Y here if you have a PantherLord/GreenAsia based game controller or adapter. @@ -283,9 +278,8 @@ config PANTHERLORD_FF or adapter and want to enable force feedback support for it. config HID_PETALYNX - tristate "Petalynx" if EMBEDDED + tristate "Petalynx" depends on USB_HID - default !EMBEDDED ---help--- Support for Petalynx Maxter remote control. @@ -360,16 +354,14 @@ config HID_ROCCAT_KONE Support for Roccat Kone mouse. config HID_SAMSUNG - tristate "Samsung" if EMBEDDED + tristate "Samsung" depends on USB_HID - default !EMBEDDED ---help--- Support for Samsung InfraRed remote control or keyboards. config HID_SONY - tristate "Sony" if EMBEDDED + tristate "Sony" depends on USB_HID - default !EMBEDDED ---help--- Support for Sony PS3 controller. @@ -380,16 +372,14 @@ config HID_STANTUM Support for Stantum multitouch panel. config HID_SUNPLUS - tristate "Sunplus" if EMBEDDED + tristate "Sunplus" depends on USB_HID - default !EMBEDDED ---help--- Support for Sunplus wireless desktop. config HID_GREENASIA - tristate "GreenAsia (Product ID 0x12) support" if EMBEDDED + tristate "GreenAsia (Product ID 0x12) support" depends on USB_HID - default !EMBEDDED ---help--- Say Y here if you have a GreenAsia (Product ID 0x12) based game controller or adapter. @@ -404,9 +394,8 @@ config GREENASIA_FF and want to enable force feedback support for it. config HID_SMARTJOYPLUS - tristate "SmartJoy PLUS PS2/USB adapter support" if EMBEDDED + tristate "SmartJoy PLUS PS2/USB adapter support" depends on USB_HID - default !EMBEDDED ---help--- Support for SmartJoy PLUS PS2/USB adapter. @@ -419,16 +408,14 @@ config SMARTJOYPLUS_FF enable force feedback support for it. config HID_TOPSEED - tristate "TopSeed Cyberlink remote control support" if EMBEDDED + tristate "TopSeed Cyberlink remote control support" depends on USB_HID - default !EMBEDDED ---help--- Say Y if you have a TopSeed Cyberlink or BTC Emprex remote control. config HID_THRUSTMASTER - tristate "ThrustMaster devices support" if EMBEDDED + tristate "ThrustMaster devices support" depends on USB_HID - default !EMBEDDED ---help--- Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or a THRUSTMASTER Ferrari GT Rumble Wheel. @@ -457,9 +444,8 @@ config HID_WACOM_POWER_SUPPLY Wacom Bluetooth devices. config HID_ZEROPLUS - tristate "Zeroplus based game controller support" if EMBEDDED + tristate "Zeroplus based game controller support" depends on USB_HID - default !EMBEDDED ---help--- Say Y here if you have a Zeroplus based game controller. @@ -472,9 +458,8 @@ config ZEROPLUS_FF to have force feedback support for it. config HID_ZYDACRON - tristate "Zydacron remote control support" if EMBEDDED + tristate "Zydacron remote control support" depends on USB_HID - default !EMBEDDED ---help--- Support for Zydacron remote control. -- cgit v1.2.2