From a38884f681a4d044befd30d9f3d19a0821bae63a Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 12 Mar 2013 10:15:43 +0200
Subject: videomode: simplify videomode Kconfig and Makefile

This patch simplifies videomode related Kconfig and Makefile. After this
patch, there's only one non-user selectable Kconfig option left,
VIDEOMODE_HELPERS. The reasons for the change:

* Videomode helper functions are not something that should be shown in
  the kernel configuration options. The related code should just be
  included if it's needed, i.e. selected by drivers using videomode.

* There's no need to have separate Kconfig options for videomode and
  display_timing. First of all, the amount of code for both is quite
  small. Second, videomode depends on display_timing, and display_timing
  in itself is not really useful, so both would be included in any case.

* CONFIG_VIDEOMODE is a bit vague name, and CONFIG_VIDEOMODE_HELPERS
  describes better what's included.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/gpu/drm/drm_modes.c    |  8 ++++----
 drivers/gpu/drm/tilcdc/Kconfig |  3 +--
 drivers/video/Kconfig          | 22 ++--------------------
 drivers/video/Makefile         |  8 ++++----
 drivers/video/fbmon.c          |  8 ++++----
 5 files changed, 15 insertions(+), 34 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 04fa6f1808d1..0698c0e9bc26 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -506,7 +506,7 @@ drm_gtf_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh,
 }
 EXPORT_SYMBOL(drm_gtf_mode);
 
-#if IS_ENABLED(CONFIG_VIDEOMODE)
+#ifdef CONFIG_VIDEOMODE_HELPERS
 int drm_display_mode_from_videomode(const struct videomode *vm,
 				    struct drm_display_mode *dmode)
 {
@@ -540,9 +540,8 @@ int drm_display_mode_from_videomode(const struct videomode *vm,
 	return 0;
 }
 EXPORT_SYMBOL_GPL(drm_display_mode_from_videomode);
-#endif
 
-#if IS_ENABLED(CONFIG_OF_VIDEOMODE)
+#ifdef CONFIG_OF
 /**
  * of_get_drm_display_mode - get a drm_display_mode from devicetree
  * @np: device_node with the timing specification
@@ -572,7 +571,8 @@ int of_get_drm_display_mode(struct device_node *np,
 	return 0;
 }
 EXPORT_SYMBOL_GPL(of_get_drm_display_mode);
-#endif
+#endif /* CONFIG_OF */
+#endif /* CONFIG_VIDEOMODE_HELPERS */
 
 /**
  * drm_mode_set_name - set the name on a mode
diff --git a/drivers/gpu/drm/tilcdc/Kconfig b/drivers/gpu/drm/tilcdc/Kconfig
index d24d04013476..e461e9972455 100644
--- a/drivers/gpu/drm/tilcdc/Kconfig
+++ b/drivers/gpu/drm/tilcdc/Kconfig
@@ -4,8 +4,7 @@ config DRM_TILCDC
 	select DRM_KMS_HELPER
 	select DRM_KMS_CMA_HELPER
 	select DRM_GEM_CMA_HELPER
-	select OF_VIDEOMODE
-	select OF_DISPLAY_TIMING
+	select VIDEOMODE_HELPERS
 	select BACKLIGHT_CLASS_DEVICE
 	help
 	  Choose this option if you have an TI SoC with LCDC display
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 4c1546f71d56..2a81b11367fe 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -31,26 +31,8 @@ config VIDEO_OUTPUT_CONTROL
 	  This framework adds support for low-level control of the video 
 	  output switch.
 
-config DISPLAY_TIMING
-       bool
-
-config VIDEOMODE
-       bool
-
-config OF_DISPLAY_TIMING
-	bool "Enable device tree display timing support"
-	depends on OF
-	select DISPLAY_TIMING
-	help
-	  helper to parse display timings from the devicetree
-
-config OF_VIDEOMODE
-	bool "Enable device tree videomode support"
-	depends on OF
-	select VIDEOMODE
-	select OF_DISPLAY_TIMING
-	help
-	  helper to get videomodes from the devicetree
+config VIDEOMODE_HELPERS
+	bool
 
 config HDMI
 	bool
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 9df387334cb7..e414378d6a51 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -171,7 +171,7 @@ obj-$(CONFIG_FB_VIRTUAL)          += vfb.o
 
 #video output switch sysfs driver
 obj-$(CONFIG_VIDEO_OUTPUT_CONTROL) += output.o
-obj-$(CONFIG_DISPLAY_TIMING) += display_timing.o
-obj-$(CONFIG_OF_DISPLAY_TIMING) += of_display_timing.o
-obj-$(CONFIG_VIDEOMODE) += videomode.o
-obj-$(CONFIG_OF_VIDEOMODE) += of_videomode.o
+obj-$(CONFIG_VIDEOMODE_HELPERS) += display_timing.o videomode.o
+ifeq ($(CONFIG_OF),y)
+obj-$(CONFIG_VIDEOMODE_HELPERS) += of_display_timing.o of_videomode.o
+endif
diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index 94ad0f71383c..368cedfeaf1d 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -1376,7 +1376,7 @@ int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var, struct fb_inf
 	return err;
 }
 
-#if IS_ENABLED(CONFIG_VIDEOMODE)
+#ifdef CONFIG_VIDEOMODE_HELPERS
 int fb_videomode_from_videomode(const struct videomode *vm,
 				struct fb_videomode *fbmode)
 {
@@ -1424,9 +1424,8 @@ int fb_videomode_from_videomode(const struct videomode *vm,
 	return 0;
 }
 EXPORT_SYMBOL_GPL(fb_videomode_from_videomode);
-#endif
 
-#if IS_ENABLED(CONFIG_OF_VIDEOMODE)
+#ifdef CONFIG_OF
 static inline void dump_fb_videomode(const struct fb_videomode *m)
 {
 	pr_debug("fb_videomode = %ux%u@%uHz (%ukHz) %u %u %u %u %u %u %u %u %u\n",
@@ -1465,7 +1464,8 @@ int of_get_fb_videomode(struct device_node *np, struct fb_videomode *fb,
 	return 0;
 }
 EXPORT_SYMBOL_GPL(of_get_fb_videomode);
-#endif
+#endif /* CONFIG_OF */
+#endif /* CONFIG_VIDEOMODE_HELPERS */
 
 #else
 int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var)
-- 
cgit v1.2.2


From 06a3307975aac2d5b5a0e0f2e05d23e769f176b4 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 12 Mar 2013 10:26:45 +0200
Subject: videomode: combine videomode dmt_flags and data_flags

Both videomode and display_timing contain flags describing the modes.
These are stored in dmt_flags and data_flags. There's no need to
separate these flags, and having separate fields just makes the flags
more difficult to use.

This patch combines the fields and renames VESA_DMT_* flags to
DISPLAY_FLAGS_*.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
 drivers/gpu/drm/drm_modes.c       | 12 ++++++------
 drivers/video/fbmon.c             |  8 ++++----
 drivers/video/of_display_timing.c | 19 +++++++++----------
 drivers/video/videomode.c         |  3 +--
 4 files changed, 20 insertions(+), 22 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 0698c0e9bc26..f83f0719922e 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -523,17 +523,17 @@ int drm_display_mode_from_videomode(const struct videomode *vm,
 	dmode->clock = vm->pixelclock / 1000;
 
 	dmode->flags = 0;
-	if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
+	if (vm->flags & DISPLAY_FLAGS_HSYNC_HIGH)
 		dmode->flags |= DRM_MODE_FLAG_PHSYNC;
-	else if (vm->dmt_flags & VESA_DMT_HSYNC_LOW)
+	else if (vm->flags & DISPLAY_FLAGS_HSYNC_LOW)
 		dmode->flags |= DRM_MODE_FLAG_NHSYNC;
-	if (vm->dmt_flags & VESA_DMT_VSYNC_HIGH)
+	if (vm->flags & DISPLAY_FLAGS_VSYNC_HIGH)
 		dmode->flags |= DRM_MODE_FLAG_PVSYNC;
-	else if (vm->dmt_flags & VESA_DMT_VSYNC_LOW)
+	else if (vm->flags & DISPLAY_FLAGS_VSYNC_LOW)
 		dmode->flags |= DRM_MODE_FLAG_NVSYNC;
-	if (vm->data_flags & DISPLAY_FLAGS_INTERLACED)
+	if (vm->flags & DISPLAY_FLAGS_INTERLACED)
 		dmode->flags |= DRM_MODE_FLAG_INTERLACE;
-	if (vm->data_flags & DISPLAY_FLAGS_DOUBLESCAN)
+	if (vm->flags & DISPLAY_FLAGS_DOUBLESCAN)
 		dmode->flags |= DRM_MODE_FLAG_DBLSCAN;
 	drm_mode_set_name(dmode);
 
diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index 368cedfeaf1d..e5cc2fdb4c8d 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -1398,13 +1398,13 @@ int fb_videomode_from_videomode(const struct videomode *vm,
 
 	fbmode->sync = 0;
 	fbmode->vmode = 0;
-	if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
+	if (vm->flags & DISPLAY_FLAGS_HSYNC_HIGH)
 		fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
-	if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
+	if (vm->flags & DISPLAY_FLAGS_HSYNC_HIGH)
 		fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
-	if (vm->data_flags & DISPLAY_FLAGS_INTERLACED)
+	if (vm->flags & DISPLAY_FLAGS_INTERLACED)
 		fbmode->vmode |= FB_VMODE_INTERLACED;
-	if (vm->data_flags & DISPLAY_FLAGS_DOUBLESCAN)
+	if (vm->flags & DISPLAY_FLAGS_DOUBLESCAN)
 		fbmode->vmode |= FB_VMODE_DOUBLE;
 	fbmode->flag = 0;
 
diff --git a/drivers/video/of_display_timing.c b/drivers/video/of_display_timing.c
index 13ecd9897010..56009bc02b02 100644
--- a/drivers/video/of_display_timing.c
+++ b/drivers/video/of_display_timing.c
@@ -79,25 +79,24 @@ static struct display_timing *of_get_display_timing(struct device_node *np)
 	ret |= parse_timing_property(np, "vsync-len", &dt->vsync_len);
 	ret |= parse_timing_property(np, "clock-frequency", &dt->pixelclock);
 
-	dt->dmt_flags = 0;
-	dt->data_flags = 0;
+	dt->flags = 0;
 	if (!of_property_read_u32(np, "vsync-active", &val))
-		dt->dmt_flags |= val ? VESA_DMT_VSYNC_HIGH :
-				VESA_DMT_VSYNC_LOW;
+		dt->flags |= val ? DISPLAY_FLAGS_VSYNC_HIGH :
+				DISPLAY_FLAGS_VSYNC_LOW;
 	if (!of_property_read_u32(np, "hsync-active", &val))
-		dt->dmt_flags |= val ? VESA_DMT_HSYNC_HIGH :
-				VESA_DMT_HSYNC_LOW;
+		dt->flags |= val ? DISPLAY_FLAGS_HSYNC_HIGH :
+				DISPLAY_FLAGS_HSYNC_LOW;
 	if (!of_property_read_u32(np, "de-active", &val))
-		dt->data_flags |= val ? DISPLAY_FLAGS_DE_HIGH :
+		dt->flags |= val ? DISPLAY_FLAGS_DE_HIGH :
 				DISPLAY_FLAGS_DE_LOW;
 	if (!of_property_read_u32(np, "pixelclk-active", &val))
-		dt->data_flags |= val ? DISPLAY_FLAGS_PIXDATA_POSEDGE :
+		dt->flags |= val ? DISPLAY_FLAGS_PIXDATA_POSEDGE :
 				DISPLAY_FLAGS_PIXDATA_NEGEDGE;
 
 	if (of_property_read_bool(np, "interlaced"))
-		dt->data_flags |= DISPLAY_FLAGS_INTERLACED;
+		dt->flags |= DISPLAY_FLAGS_INTERLACED;
 	if (of_property_read_bool(np, "doublescan"))
-		dt->data_flags |= DISPLAY_FLAGS_DOUBLESCAN;
+		dt->flags |= DISPLAY_FLAGS_DOUBLESCAN;
 
 	if (ret) {
 		pr_err("%s: error reading timing properties\n",
diff --git a/drivers/video/videomode.c b/drivers/video/videomode.c
index 21c47a202afa..810afff79bc1 100644
--- a/drivers/video/videomode.c
+++ b/drivers/video/videomode.c
@@ -31,8 +31,7 @@ int videomode_from_timing(const struct display_timings *disp,
 	vm->vback_porch = display_timing_get_value(&dt->vback_porch, TE_TYP);
 	vm->vsync_len = display_timing_get_value(&dt->vsync_len, TE_TYP);
 
-	vm->dmt_flags = dt->dmt_flags;
-	vm->data_flags = dt->data_flags;
+	vm->flags = dt->flags;
 
 	return 0;
 }
-- 
cgit v1.2.2


From 694f050650798b82f2c7b9983e80117d58b34bf3 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 12 Mar 2013 10:35:16 +0200
Subject: videomode: remove timing_entry_index

Display timing's fields have minimum, typical and maximum values. These
can be accessed by using timing_entry_index enum, and
display_timing_get_value() function.

There's no real need for this extra complexity. The values can be
accessed more easily by just using the min/typ/max fields.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
 drivers/video/videomode.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/videomode.c b/drivers/video/videomode.c
index 810afff79bc1..a3d95f263cd5 100644
--- a/drivers/video/videomode.c
+++ b/drivers/video/videomode.c
@@ -20,16 +20,16 @@ int videomode_from_timing(const struct display_timings *disp,
 	if (!dt)
 		return -EINVAL;
 
-	vm->pixelclock = display_timing_get_value(&dt->pixelclock, TE_TYP);
-	vm->hactive = display_timing_get_value(&dt->hactive, TE_TYP);
-	vm->hfront_porch = display_timing_get_value(&dt->hfront_porch, TE_TYP);
-	vm->hback_porch = display_timing_get_value(&dt->hback_porch, TE_TYP);
-	vm->hsync_len = display_timing_get_value(&dt->hsync_len, TE_TYP);
+	vm->pixelclock = dt->pixelclock.typ;
+	vm->hactive = dt->hactive.typ;
+	vm->hfront_porch = dt->hfront_porch.typ;
+	vm->hback_porch = dt->hback_porch.typ;
+	vm->hsync_len = dt->hsync_len.typ;
 
-	vm->vactive = display_timing_get_value(&dt->vactive, TE_TYP);
-	vm->vfront_porch = display_timing_get_value(&dt->vfront_porch, TE_TYP);
-	vm->vback_porch = display_timing_get_value(&dt->vback_porch, TE_TYP);
-	vm->vsync_len = display_timing_get_value(&dt->vsync_len, TE_TYP);
+	vm->vactive = dt->vactive.typ;
+	vm->vfront_porch = dt->vfront_porch.typ;
+	vm->vback_porch = dt->vback_porch.typ;
+	vm->vsync_len = dt->vsync_len.typ;
 
 	vm->flags = dt->flags;
 
-- 
cgit v1.2.2


From 6cd2c7db41eab204b6474534df4ca68a7dc53d86 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 21 Mar 2013 14:20:12 +0200
Subject: videomode: videomode_from_timing work

We currently have videomode_from_timing(), which takes one
display_timing entry from display_timings.

To make it easier to use display_timing without display_timings, this
patch renames videomode_from_timing() to videomode_from_timings(), and
adds a new videomode_from_timing() which just converts a given
display_timing to videomode.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
 drivers/gpu/drm/tilcdc/tilcdc_panel.c |  2 +-
 drivers/video/of_videomode.c          |  2 +-
 drivers/video/videomode.c             | 25 ++++++++++++++++---------
 3 files changed, 18 insertions(+), 11 deletions(-)

(limited to 'drivers')

diff --git a/drivers/gpu/drm/tilcdc/tilcdc_panel.c b/drivers/gpu/drm/tilcdc/tilcdc_panel.c
index 580b74e2022b..90ee49786372 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_panel.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_panel.c
@@ -173,7 +173,7 @@ static int panel_connector_get_modes(struct drm_connector *connector)
 		struct drm_display_mode *mode = drm_mode_create(dev);
 		struct videomode vm;
 
-		if (videomode_from_timing(timings, &vm, i))
+		if (videomode_from_timings(timings, &vm, i))
 			break;
 
 		drm_display_mode_from_videomode(&vm, mode);
diff --git a/drivers/video/of_videomode.c b/drivers/video/of_videomode.c
index 5b8066cd397f..111c2d1911d3 100644
--- a/drivers/video/of_videomode.c
+++ b/drivers/video/of_videomode.c
@@ -43,7 +43,7 @@ int of_get_videomode(struct device_node *np, struct videomode *vm,
 	if (index == OF_USE_NATIVE_MODE)
 		index = disp->native_mode;
 
-	ret = videomode_from_timing(disp, vm, index);
+	ret = videomode_from_timings(disp, vm, index);
 	if (ret)
 		return ret;
 
diff --git a/drivers/video/videomode.c b/drivers/video/videomode.c
index a3d95f263cd5..df375c96c5d3 100644
--- a/drivers/video/videomode.c
+++ b/drivers/video/videomode.c
@@ -11,15 +11,9 @@
 #include <video/display_timing.h>
 #include <video/videomode.h>
 
-int videomode_from_timing(const struct display_timings *disp,
-			  struct videomode *vm, unsigned int index)
+void videomode_from_timing(const struct display_timing *dt,
+			  struct videomode *vm)
 {
-	struct display_timing *dt;
-
-	dt = display_timings_get(disp, index);
-	if (!dt)
-		return -EINVAL;
-
 	vm->pixelclock = dt->pixelclock.typ;
 	vm->hactive = dt->hactive.typ;
 	vm->hfront_porch = dt->hfront_porch.typ;
@@ -32,7 +26,20 @@ int videomode_from_timing(const struct display_timings *disp,
 	vm->vsync_len = dt->vsync_len.typ;
 
 	vm->flags = dt->flags;
+}
+EXPORT_SYMBOL_GPL(videomode_from_timing);
+
+int videomode_from_timings(const struct display_timings *disp,
+			  struct videomode *vm, unsigned int index)
+{
+	struct display_timing *dt;
+
+	dt = display_timings_get(disp, index);
+	if (!dt)
+		return -EINVAL;
+
+	videomode_from_timing(dt, vm);
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(videomode_from_timing);
+EXPORT_SYMBOL_GPL(videomode_from_timings);
-- 
cgit v1.2.2


From 18a434b5720754f6e584667dbf52fb0fa99de582 Mon Sep 17 00:00:00 2001
From: Tony Prisk <linux@prisktech.co.nz>
Date: Wed, 3 Apr 2013 07:20:33 +1300
Subject: video: vt8500: Make wmt_ge_rops optional

wmt_ge_rops is a seperate driver to vt8500/wm8505 framebuffer
driver but is currently a required option. This patch makes
accelerated raster ops optional.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/Kconfig       | 22 ++++++++++++----------
 drivers/video/wmt_ge_rops.h | 23 +++++++++++++++++++++++
 2 files changed, 35 insertions(+), 10 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 4c1546f71d56..661aa54dcb13 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -212,14 +212,6 @@ config FB_SYS_FOPS
        depends on FB
        default n
 
-config FB_WMT_GE_ROPS
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include functions for accelerated rectangle filling and area
-	  copying using WonderMedia Graphics Engine operations.
-
 config FB_DEFERRED_IO
 	bool
 	depends on FB
@@ -1799,7 +1791,8 @@ config FB_AU1200
 config FB_VT8500
 	bool "VT8500 LCD Driver"
 	depends on (FB = y) && ARM && ARCH_VT8500
-	select FB_WMT_GE_ROPS
+	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
+	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT
 	help
 	  This is the framebuffer driver for VIA VT8500 integrated LCD
@@ -1808,12 +1801,21 @@ config FB_VT8500
 config FB_WM8505
 	bool "WM8505 frame buffer support"
 	depends on (FB = y) && ARM && ARCH_VT8500
-	select FB_WMT_GE_ROPS
+	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
+	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT
 	help
 	  This is the framebuffer driver for WonderMedia WM8505/WM8650
 	  integrated LCD controller.
 
+config FB_WMT_GE_ROPS
+	bool "VT8500/WM85xx accelerated raster ops support"
+	depends on (FB = y) && (FB_VT8500 || FB_WM8505)
+	default n
+	help
+	  This adds support for accelerated raster operations on the
+	  VIA VT8500 and Wondermedia 85xx series SoCs.
+
 source "drivers/video/geode/Kconfig"
 
 config FB_HIT
diff --git a/drivers/video/wmt_ge_rops.h b/drivers/video/wmt_ge_rops.h
index 87380751a443..f73ec6377a46 100644
--- a/drivers/video/wmt_ge_rops.h
+++ b/drivers/video/wmt_ge_rops.h
@@ -1,5 +1,28 @@
+#ifdef CONFIG_FB_WMT_GE_ROPS
+
 extern void wmt_ge_fillrect(struct fb_info *info,
 			    const struct fb_fillrect *rect);
 extern void wmt_ge_copyarea(struct fb_info *info,
 			    const struct fb_copyarea *area);
 extern int wmt_ge_sync(struct fb_info *info);
+
+#else
+
+static inline int wmt_ge_sync(struct fb_info *p)
+{
+	return 0;
+}
+
+static inline void wmt_ge_fillrect(struct fb_info *p,
+				    const struct fb_fillrect *rect)
+{
+	sys_fillrect(p, rect);
+}
+
+static inline void wmt_ge_copyarea(struct fb_info *p,
+				     const struct fb_copyarea *area)
+{
+	sys_copyarea(p, area);
+}
+
+#endif
-- 
cgit v1.2.2


From 3af4ae1e4b57a663fff9cfe711c84fefb6ec966f Mon Sep 17 00:00:00 2001
From: Tony Prisk <linux@prisktech.co.nz>
Date: Wed, 3 Apr 2013 07:20:34 +1300
Subject: video: vt8500: Remove unused platform_data/video-vt8500lcdfb.h

With the conversion to devicetree only for arch-vt8500, this
header is no longer required. This patch removes the #include
from the two framebuffer drivers that used it, and the header file.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/vt8500lcdfb.c | 2 --
 drivers/video/wm8505fb.c    | 2 --
 2 files changed, 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/vt8500lcdfb.c b/drivers/video/vt8500lcdfb.c
index aa2579c2364a..2ff2312a16ac 100644
--- a/drivers/video/vt8500lcdfb.c
+++ b/drivers/video/vt8500lcdfb.c
@@ -30,8 +30,6 @@
 #include <linux/platform_device.h>
 #include <linux/wait.h>
 
-#include <linux/platform_data/video-vt8500lcdfb.h>
-
 #include "vt8500lcdfb.h"
 #include "wmt_ge_rops.h"
 
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index 4dd0580f96fd..fe9afd60a018 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -32,8 +32,6 @@
 #include <linux/of_fdt.h>
 #include <linux/memblock.h>
 
-#include <linux/platform_data/video-vt8500lcdfb.h>
-
 #include "wm8505fb_regs.h"
 #include "wmt_ge_rops.h"
 
-- 
cgit v1.2.2


From 3d20837dd6bd2891d5788c0a574edaf2b54fc377 Mon Sep 17 00:00:00 2001
From: Tony Prisk <linux@prisktech.co.nz>
Date: Wed, 3 Apr 2013 07:20:35 +1300
Subject: video: vt8500: Correct descriptions in video/Kconfig

This patch corrects the descriptions for the VIA VT8500 and
Wondermedia WM8xxx-series framebuffer drivers to correctly reflect
which hardware they support.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/Kconfig | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 661aa54dcb13..ad762ed2c5aa 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1789,7 +1789,7 @@ config FB_AU1200
 	  option au1200fb:panel=<name>.
 
 config FB_VT8500
-	bool "VT8500 LCD Driver"
+	bool "VIA VT8500 framebuffer support"
 	depends on (FB = y) && ARM && ARCH_VT8500
 	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
 	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
@@ -1799,17 +1799,18 @@ config FB_VT8500
 	  controller.
 
 config FB_WM8505
-	bool "WM8505 frame buffer support"
+	bool "Wondermedia WM8xxx-series frame buffer support"
 	depends on (FB = y) && ARM && ARCH_VT8500
 	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
 	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT
 	help
-	  This is the framebuffer driver for WonderMedia WM8505/WM8650
-	  integrated LCD controller.
+	  This is the framebuffer driver for WonderMedia WM8xxx-series
+	  integrated LCD controller. This driver covers the WM8505, WM8650
+	  and WM8850 SoCs.
 
 config FB_WMT_GE_ROPS
-	bool "VT8500/WM85xx accelerated raster ops support"
+	bool "VT8500/WM8xxx accelerated raster ops support"
 	depends on (FB = y) && (FB_VT8500 || FB_WM8505)
 	default n
 	help
-- 
cgit v1.2.2


From 9e340fdc5af6ae3041d73319bbd1438c7d6d566c Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@lip6.fr>
Date: Wed, 3 Apr 2013 07:20:36 +1300
Subject: drivers/video/wm8505fb.c: use devm_ functions

The various devm_ functions allocate memory that is released when a driver
detaches.  This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.

The patch makes some other cleanups.  First, the original code used
devm_kzalloc, but kfree.  This would lead to a double free.  The problem
was found using the following semantic match (http://coccinelle.lip6.fr/):

// <smpl>
@@
expression x,e;
@@
x = devm_kzalloc(...)
... when != x = e
?-kfree(x,...);
// </smpl>

The error-handing code of devm_request_and_ioremap does not print any
warning message, because devm_request_and_ioremap does this.

The call to dma_alloc_coherent is converted to its devm equivalent,
dmam_alloc_coherent.  This implicitly introduces a call to
dmam_free_coherent, which was completly missing in the original code.

A semicolon is removed at the end of the error-handling code for the call
to dma_alloc_coherent.

The block of code calling fb_alloc_cmap is moved below the block of code
calling wm8505fb_set_par, so that the error-handing code of the call to
wm8505fb_set_par can just return ret.  This way there is only one block of
error-handling code that needs to call fb_dealloc_cmap, and so this is
moved up to the place where it is needed, eliminating the need for all
gotos and labels in the function.  This was suggested by Tony Prisk.

The initializations of fbi and ret at the beginning of the function are not
necessary and are removed.  The call platform_set_drvdata(pdev, NULL); at
the end of the function is also removed.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/wm8505fb.c | 79 ++++++++++++------------------------------------
 1 file changed, 19 insertions(+), 60 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index fe9afd60a018..020df1ddb674 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -272,15 +272,11 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	unsigned long fb_mem_len;
 	void *fb_mem_virt;
 
-	ret = -ENOMEM;
-	fbi = NULL;
-
 	fbi = devm_kzalloc(&pdev->dev, sizeof(struct wm8505fb_info) +
 			sizeof(u32) * 16, GFP_KERNEL);
 	if (!fbi) {
 		dev_err(&pdev->dev, "Failed to initialize framebuffer device\n");
-		ret = -ENOMEM;
-		goto failed;
+		return -ENOMEM;
 	}
 
 	strcpy(fbi->fb.fix.id, DRIVER_NAME);
@@ -306,31 +302,14 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	fbi->fb.pseudo_palette	= addr;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no I/O memory resource defined\n");
-		ret = -ENODEV;
-		goto failed_fbi;
-	}
-
-	res = request_mem_region(res->start, resource_size(res), DRIVER_NAME);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "failed to request I/O memory\n");
-		ret = -EBUSY;
-		goto failed_fbi;
-	}
-
-	fbi->regbase = ioremap(res->start, resource_size(res));
-	if (fbi->regbase == NULL) {
-		dev_err(&pdev->dev, "failed to map I/O memory\n");
-		ret = -EBUSY;
-		goto failed_free_res;
-	}
+	fbi->regbase = devm_request_and_ioremap(&pdev->dev, res);
+	if (fbi->regbase == NULL)
+		return -EBUSY;
 
 	np = of_parse_phandle(pdev->dev.of_node, "default-mode", 0);
 	if (!np) {
 		pr_err("%s: No display description in Device Tree\n", __func__);
-		ret = -EINVAL;
-		goto failed_free_res;
+		return -EINVAL;
 	}
 
 	/*
@@ -349,7 +328,7 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	ret |= of_property_read_u32(np, "bpp", &bpp);
 	if (ret) {
 		pr_err("%s: Unable to read display properties\n", __func__);
-		goto failed_free_res;
+		return -EINVAL;
 	}
 
 	of_mode.vmode = FB_VMODE_NONINTERLACED;
@@ -363,12 +342,12 @@ static int wm8505fb_probe(struct platform_device *pdev)
 
 	/* try allocating the framebuffer */
 	fb_mem_len = of_mode.xres * of_mode.yres * 2 * (bpp / 8);
-	fb_mem_virt = dma_alloc_coherent(&pdev->dev, fb_mem_len, &fb_mem_phys,
+	fb_mem_virt = dmam_alloc_coherent(&pdev->dev, fb_mem_len, &fb_mem_phys,
 				GFP_KERNEL);
 	if (!fb_mem_virt) {
 		pr_err("%s: Failed to allocate framebuffer\n", __func__);
 		return -ENOMEM;
-	};
+	}
 
 	fbi->fb.var.xres_virtual	= of_mode.xres;
 	fbi->fb.var.yres_virtual	= of_mode.yres * 2;
@@ -379,28 +358,29 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	fbi->fb.screen_base		= fb_mem_virt;
 	fbi->fb.screen_size		= fb_mem_len;
 
-	if (fb_alloc_cmap(&fbi->fb.cmap, 256, 0) < 0) {
-		dev_err(&pdev->dev, "Failed to allocate color map\n");
-		ret = -ENOMEM;
-		goto failed_free_io;
-	}
-
-	wm8505fb_init_hw(&fbi->fb);
-
 	fbi->contrast = 0x80;
 	ret = wm8505fb_set_par(&fbi->fb);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to set parameters\n");
-		goto failed_free_cmap;
+		return ret;
 	}
 
+	if (fb_alloc_cmap(&fbi->fb.cmap, 256, 0) < 0) {
+		dev_err(&pdev->dev, "Failed to allocate color map\n");
+		return -ENOMEM;
+	}
+
+	wm8505fb_init_hw(&fbi->fb);
+
 	platform_set_drvdata(pdev, fbi);
 
 	ret = register_framebuffer(&fbi->fb);
 	if (ret < 0) {
 		dev_err(&pdev->dev,
 			"Failed to register framebuffer device: %d\n", ret);
-		goto failed_free_cmap;
+		if (fbi->fb.cmap.len)
+			fb_dealloc_cmap(&fbi->fb.cmap);
+		return ret;
 	}
 
 	ret = device_create_file(&pdev->dev, &dev_attr_contrast);
@@ -414,25 +394,11 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	       fbi->fb.fix.smem_start + fbi->fb.fix.smem_len - 1);
 
 	return 0;
-
-failed_free_cmap:
-	if (fbi->fb.cmap.len)
-		fb_dealloc_cmap(&fbi->fb.cmap);
-failed_free_io:
-	iounmap(fbi->regbase);
-failed_free_res:
-	release_mem_region(res->start, resource_size(res));
-failed_fbi:
-	platform_set_drvdata(pdev, NULL);
-	kfree(fbi);
-failed:
-	return ret;
 }
 
 static int wm8505fb_remove(struct platform_device *pdev)
 {
 	struct wm8505fb_info *fbi = platform_get_drvdata(pdev);
-	struct resource *res;
 
 	device_remove_file(&pdev->dev, &dev_attr_contrast);
 
@@ -443,13 +409,6 @@ static int wm8505fb_remove(struct platform_device *pdev)
 	if (fbi->fb.cmap.len)
 		fb_dealloc_cmap(&fbi->fb.cmap);
 
-	iounmap(fbi->regbase);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
-	kfree(fbi);
-
 	return 0;
 }
 
-- 
cgit v1.2.2


From de68efced121eda500792b42547847636066525e Mon Sep 17 00:00:00 2001
From: Tony Prisk <linux@prisktech.co.nz>
Date: Wed, 3 Apr 2013 07:20:37 +1300
Subject: video: vt8500: Adjust contrast in wm8505 framebuffer driver.

The contrast value was typo'd on the original commit (0x80 instead of
0x08). Following feedback from an enduser, a value of 0x10 seems more
suitable due to the default backlight being <100%.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/wm8505fb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index 020df1ddb674..e3be1e37d2b3 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -358,7 +358,7 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	fbi->fb.screen_base		= fb_mem_virt;
 	fbi->fb.screen_size		= fb_mem_len;
 
-	fbi->contrast = 0x80;
+	fbi->contrast = 0x10;
 	ret = wm8505fb_set_par(&fbi->fb);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to set parameters\n");
-- 
cgit v1.2.2


From 7ab0a48420c95dc4099d1777a5a24dffad102cf1 Mon Sep 17 00:00:00 2001
From: Tony Prisk <linux@prisktech.co.nz>
Date: Wed, 3 Apr 2013 07:20:38 +1300
Subject: video: fb: vt8500: Convert framebuffer drivers to standardized
 binding

Now that a display timing binding is available, convert our almost identical
binding to use the standard binding.

This patch converts the vt8500 and wm8505 framebuffer drivers and
associated dts/dtsi files to use the standard binding as defined in
bindings/video/display-timing.txt.

There are two side-effects of making this conversion:

1) The fb node should now be in the board file, rather than the soc file as
the display-timing node is a child of the fb node.

2) We still require a bits per pixel property to initialize the framebuffer
for the different lcd panels. Rather than including this as part of the
display timing, it is moved into the framebuffer node.

I have also taken the opportunity to alphabetise the includes of each
driver to avoid double-ups.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/Kconfig       |  6 ++++
 drivers/video/vt8500lcdfb.c | 53 ++++++++++++++---------------------
 drivers/video/wm8505fb.c    | 67 ++++++++++++++++++---------------------------
 3 files changed, 53 insertions(+), 73 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index ad762ed2c5aa..d0c932a86115 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1794,6 +1794,9 @@ config FB_VT8500
 	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
 	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select OF_DISPLAY_TIMING
+	select OF_VIDEOMODE
 	help
 	  This is the framebuffer driver for VIA VT8500 integrated LCD
 	  controller.
@@ -1804,6 +1807,9 @@ config FB_WM8505
 	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
 	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select OF_DISPLAY_TIMING
+	select OF_VIDEOMODE
 	help
 	  This is the framebuffer driver for WonderMedia WM8xxx-series
 	  integrated LCD controller. This driver covers the WM8505, WM8650
diff --git a/drivers/video/vt8500lcdfb.c b/drivers/video/vt8500lcdfb.c
index 2ff2312a16ac..9547e1831e03 100644
--- a/drivers/video/vt8500lcdfb.c
+++ b/drivers/video/vt8500lcdfb.c
@@ -15,20 +15,21 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/string.h>
 #include <linux/wait.h>
+#include <video/of_display_timing.h>
 
 #include "vt8500lcdfb.h"
 #include "wmt_ge_rops.h"
@@ -275,11 +276,11 @@ static int vt8500lcd_probe(struct platform_device *pdev)
 {
 	struct vt8500lcd_info *fbi;
 	struct resource *res;
+	struct display_timings *disp_timing;
 	void *addr;
 	int irq, ret;
 
 	struct fb_videomode	of_mode;
-	struct device_node	*np;
 	u32			bpp;
 	dma_addr_t fb_mem_phys;
 	unsigned long fb_mem_len;
@@ -344,32 +345,18 @@ static int vt8500lcd_probe(struct platform_device *pdev)
 		goto failed_free_res;
 	}
 
-	np = of_parse_phandle(pdev->dev.of_node, "default-mode", 0);
-	if (!np) {
-		pr_err("%s: No display description in Device Tree\n", __func__);
-		ret = -EINVAL;
-		goto failed_free_res;
-	}
+	disp_timing = of_get_display_timings(pdev->dev.of_node);
+	if (!disp_timing)
+		return -EINVAL;
 
-	/*
-	 * This code is copied from Sascha Hauer's of_videomode helper
-	 * and can be replaced with a call to the helper once mainlined
-	 */
-	ret = 0;
-	ret |= of_property_read_u32(np, "hactive", &of_mode.xres);
-	ret |= of_property_read_u32(np, "vactive", &of_mode.yres);
-	ret |= of_property_read_u32(np, "hback-porch", &of_mode.left_margin);
-	ret |= of_property_read_u32(np, "hfront-porch", &of_mode.right_margin);
-	ret |= of_property_read_u32(np, "hsync-len", &of_mode.hsync_len);
-	ret |= of_property_read_u32(np, "vback-porch", &of_mode.upper_margin);
-	ret |= of_property_read_u32(np, "vfront-porch", &of_mode.lower_margin);
-	ret |= of_property_read_u32(np, "vsync-len", &of_mode.vsync_len);
-	ret |= of_property_read_u32(np, "bpp", &bpp);
-	if (ret) {
-		pr_err("%s: Unable to read display properties\n", __func__);
-		goto failed_free_res;
-	}
-	of_mode.vmode = FB_VMODE_NONINTERLACED;
+	ret = of_get_fb_videomode(pdev->dev.of_node, &of_mode,
+							OF_USE_NATIVE_MODE);
+	if (ret)
+		return ret;
+
+	ret = of_property_read_u32(pdev->dev.of_node, "bits-per-pixel", &bpp);
+	if (ret)
+		return ret;
 
 	/* try allocating the framebuffer */
 	fb_mem_len = of_mode.xres * of_mode.yres * 2 * (bpp / 8);
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index e3be1e37d2b3..19e2e7ff492a 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -14,23 +14,24 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <linux/fb.h>
+#include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/wait.h>
+#include <linux/kernel.h>
+#include <linux/memblock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_fdt.h>
-#include <linux/memblock.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/wait.h>
+#include <video/of_display_timing.h>
 
 #include "wm8505fb_regs.h"
 #include "wmt_ge_rops.h"
@@ -261,12 +262,12 @@ static struct fb_ops wm8505fb_ops = {
 static int wm8505fb_probe(struct platform_device *pdev)
 {
 	struct wm8505fb_info	*fbi;
-	struct resource		*res;
+	struct resource	*res;
+	struct display_timings *disp_timing;
 	void			*addr;
 	int ret;
 
-	struct fb_videomode	of_mode;
-	struct device_node	*np;
+	struct fb_videomode	mode;
 	u32			bpp;
 	dma_addr_t fb_mem_phys;
 	unsigned long fb_mem_len;
@@ -306,33 +307,19 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	if (fbi->regbase == NULL)
 		return -EBUSY;
 
-	np = of_parse_phandle(pdev->dev.of_node, "default-mode", 0);
-	if (!np) {
-		pr_err("%s: No display description in Device Tree\n", __func__);
+	disp_timing = of_get_display_timings(pdev->dev.of_node);
+	if (!disp_timing)
 		return -EINVAL;
-	}
 
-	/*
-	 * This code is copied from Sascha Hauer's of_videomode helper
-	 * and can be replaced with a call to the helper once mainlined
-	 */
-	ret = 0;
-	ret |= of_property_read_u32(np, "hactive", &of_mode.xres);
-	ret |= of_property_read_u32(np, "vactive", &of_mode.yres);
-	ret |= of_property_read_u32(np, "hback-porch", &of_mode.left_margin);
-	ret |= of_property_read_u32(np, "hfront-porch", &of_mode.right_margin);
-	ret |= of_property_read_u32(np, "hsync-len", &of_mode.hsync_len);
-	ret |= of_property_read_u32(np, "vback-porch", &of_mode.upper_margin);
-	ret |= of_property_read_u32(np, "vfront-porch", &of_mode.lower_margin);
-	ret |= of_property_read_u32(np, "vsync-len", &of_mode.vsync_len);
-	ret |= of_property_read_u32(np, "bpp", &bpp);
-	if (ret) {
-		pr_err("%s: Unable to read display properties\n", __func__);
-		return -EINVAL;
-	}
+	ret = of_get_fb_videomode(pdev->dev.of_node, &mode, OF_USE_NATIVE_MODE);
+	if (ret)
+		return ret;
+
+	ret = of_property_read_u32(pdev->dev.of_node, "bits-per-pixel", &bpp);
+	if (ret)
+		return ret;
 
-	of_mode.vmode = FB_VMODE_NONINTERLACED;
-	fb_videomode_to_var(&fbi->fb.var, &of_mode);
+	fb_videomode_to_var(&fbi->fb.var, &mode);
 
 	fbi->fb.var.nonstd		= 0;
 	fbi->fb.var.activate		= FB_ACTIVATE_NOW;
@@ -341,7 +328,7 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	fbi->fb.var.width		= -1;
 
 	/* try allocating the framebuffer */
-	fb_mem_len = of_mode.xres * of_mode.yres * 2 * (bpp / 8);
+	fb_mem_len = mode.xres * mode.yres * 2 * (bpp / 8);
 	fb_mem_virt = dmam_alloc_coherent(&pdev->dev, fb_mem_len, &fb_mem_phys,
 				GFP_KERNEL);
 	if (!fb_mem_virt) {
@@ -349,8 +336,8 @@ static int wm8505fb_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	fbi->fb.var.xres_virtual	= of_mode.xres;
-	fbi->fb.var.yres_virtual	= of_mode.yres * 2;
+	fbi->fb.var.xres_virtual	= mode.xres;
+	fbi->fb.var.yres_virtual	= mode.yres * 2;
 	fbi->fb.var.bits_per_pixel	= bpp;
 
 	fbi->fb.fix.smem_start		= fb_mem_phys;
-- 
cgit v1.2.2


From a1655100ddfa10829b7d3b055611f268a82e335a Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Heiko=20St=C3=BCbner?= <heiko@sntech.de>
Date: Fri, 22 Mar 2013 15:13:02 +0100
Subject: AUO-K190x: Use correct line length
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Previously all functions that used the line length used xres directly,
thus hardcoding a 8bits per pixel value.

This patch calculates the correct line length according to the actual
bits per pixel value and changes all line length users to use the
calculated line length value.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/auo_k1900fb.c |  5 +++--
 drivers/video/auo_k1901fb.c |  5 +++--
 drivers/video/auo_k190x.c   | 15 ++++++++-------
 3 files changed, 14 insertions(+), 11 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/auo_k1900fb.c b/drivers/video/auo_k1900fb.c
index 1a9ac6e1f4b3..d572d3e9c502 100644
--- a/drivers/video/auo_k1900fb.c
+++ b/drivers/video/auo_k1900fb.c
@@ -82,6 +82,7 @@ static void auok1900_update_region(struct auok190xfb_par *par, int mode,
 	struct device *dev = par->info->device;
 	unsigned char *buf = (unsigned char *)par->info->screen_base;
 	int xres = par->info->var.xres;
+	int line_length = par->info->fix.line_length;
 	u16 args[4];
 
 	pm_runtime_get_sync(dev);
@@ -100,9 +101,9 @@ static void auok1900_update_region(struct auok190xfb_par *par, int mode,
 	args[1] = y1 + 1;
 	args[2] = xres;
 	args[3] = y2 - y1;
-	buf += y1 * xres;
+	buf += y1 * line_length;
 	auok190x_send_cmdargs_pixels(par, AUOK1900_CMD_PARTIALDISP, 4, args,
-				     ((y2 - y1) * xres)/2, (u16 *) buf);
+				     ((y2 - y1) * line_length)/2, (u16 *) buf);
 	auok190x_send_command(par, AUOK190X_CMD_DATA_STOP);
 
 	par->update_cnt++;
diff --git a/drivers/video/auo_k1901fb.c b/drivers/video/auo_k1901fb.c
index d1db1653cd88..9efbe2763447 100644
--- a/drivers/video/auo_k1901fb.c
+++ b/drivers/video/auo_k1901fb.c
@@ -121,6 +121,7 @@ static void auok1901_update_region(struct auok190xfb_par *par, int mode,
 	struct device *dev = par->info->device;
 	unsigned char *buf = (unsigned char *)par->info->screen_base;
 	int xres = par->info->var.xres;
+	int line_length = par->info->fix.line_length;
 	u16 args[5];
 
 	pm_runtime_get_sync(dev);
@@ -139,9 +140,9 @@ static void auok1901_update_region(struct auok190xfb_par *par, int mode,
 	args[1] = y1 + 1;
 	args[2] = xres;
 	args[3] = y2 - y1;
-	buf += y1 * xres;
+	buf += y1 * line_length;
 	auok190x_send_cmdargs_pixels_nowait(par, AUOK1901_CMD_DMA_START, 4,
-					    args, ((y2 - y1) * xres)/2,
+					    args, ((y2 - y1) * line_length)/2,
 					    (u16 *) buf);
 	auok190x_send_command_nowait(par, AUOK190X_CMD_DATA_STOP);
 
diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c
index 53846cb534d4..bc0b6433eae6 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/auo_k190x.c
@@ -224,8 +224,8 @@ static void auok190xfb_dpy_deferred_io(struct fb_info *info,
 {
 	struct fb_deferred_io *fbdefio = info->fbdefio;
 	struct auok190xfb_par *par = info->par;
+	u16 line_length = info->fix.line_length;
 	u16 yres = info->var.yres;
-	u16 xres = info->var.xres;
 	u16 y1 = 0, h = 0;
 	int prev_index = -1;
 	struct page *cur;
@@ -254,7 +254,7 @@ static void auok190xfb_dpy_deferred_io(struct fb_info *info,
 	}
 
 	/* height increment is fixed per page */
-	h_inc = DIV_ROUND_UP(PAGE_SIZE , xres);
+	h_inc = DIV_ROUND_UP(PAGE_SIZE , line_length);
 
 	/* calculate number of pages from pixel height */
 	threshold = par->consecutive_threshold / h_inc;
@@ -265,7 +265,7 @@ static void auok190xfb_dpy_deferred_io(struct fb_info *info,
 	list_for_each_entry(cur, &fbdefio->pagelist, lru) {
 		if (prev_index < 0) {
 			/* just starting so assign first page */
-			y1 = (cur->index << PAGE_SHIFT) / xres;
+			y1 = (cur->index << PAGE_SHIFT) / line_length;
 			h = h_inc;
 		} else if ((cur->index - prev_index) <= threshold) {
 			/* page is within our threshold for single updates */
@@ -275,7 +275,7 @@ static void auok190xfb_dpy_deferred_io(struct fb_info *info,
 			par->update_partial(par, y1, y1 + h);
 
 			/* start over with our non consecutive page */
-			y1 = (cur->index << PAGE_SHIFT) / xres;
+			y1 = (cur->index << PAGE_SHIFT) / line_length;
 			h = h_inc;
 		}
 		prev_index = cur->index;
@@ -896,13 +896,13 @@ int auok190x_common_probe(struct platform_device *pdev,
 		info->var.yres = panel->w;
 		info->var.xres_virtual = panel->h;
 		info->var.yres_virtual = panel->w;
-		info->fix.line_length = panel->h;
+		info->fix.line_length = panel->h * info->var.bits_per_pixel / 8;
 	} else {
 		info->var.xres = panel->w;
 		info->var.yres = panel->h;
 		info->var.xres_virtual = panel->w;
 		info->var.yres_virtual = panel->h;
-		info->fix.line_length = panel->w;
+		info->fix.line_length = panel->w * info->var.bits_per_pixel / 8;
 	}
 
 	par->resolution = board->resolution;
@@ -910,7 +910,8 @@ int auok190x_common_probe(struct platform_device *pdev,
 
 	/* videomemory handling */
 
-	videomemorysize = roundup((panel->w * panel->h), PAGE_SIZE);
+	videomemorysize = roundup((panel->w * panel->h) *
+				info->var.bits_per_pixel / 8, PAGE_SIZE);
 	videomemory = vmalloc(videomemorysize);
 	if (!videomemory) {
 		ret = -ENOMEM;
-- 
cgit v1.2.2


From 70f1e28e65dec704cd49bf7e21c2c372096cf5b3 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Heiko=20St=C3=BCbner?= <heiko@sntech.de>
Date: Fri, 22 Mar 2013 15:13:37 +0100
Subject: AUO-K190x: add runtime-pm calls to controller init functions
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The controller init may be called from a context where the device
is runtime suspended, leading to a deadlock, as the controllers only
accepts the wakeup command when suspended.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/auo_k1900fb.c | 6 ++++++
 drivers/video/auo_k1901fb.c | 6 ++++++
 2 files changed, 12 insertions(+)

(limited to 'drivers')

diff --git a/drivers/video/auo_k1900fb.c b/drivers/video/auo_k1900fb.c
index d572d3e9c502..f5b668e77af3 100644
--- a/drivers/video/auo_k1900fb.c
+++ b/drivers/video/auo_k1900fb.c
@@ -60,9 +60,12 @@
 
 static void auok1900_init(struct auok190xfb_par *par)
 {
+	struct device *dev = par->info->device;
 	struct auok190x_board *board = par->board;
 	u16 init_param = 0;
 
+	pm_runtime_get_sync(dev);
+
 	init_param |= AUOK1900_INIT_TEMP_AVERAGE;
 	init_param |= AUOK1900_INIT_ROTATE(par->rotation);
 	init_param |= AUOK190X_INIT_INVERSE_WHITE;
@@ -74,6 +77,9 @@ static void auok1900_init(struct auok190xfb_par *par)
 
 	/* let the controller finish */
 	board->wait_for_rdy(par);
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
 }
 
 static void auok1900_update_region(struct auok190xfb_par *par, int mode,
diff --git a/drivers/video/auo_k1901fb.c b/drivers/video/auo_k1901fb.c
index 9efbe2763447..12b9adcb75c5 100644
--- a/drivers/video/auo_k1901fb.c
+++ b/drivers/video/auo_k1901fb.c
@@ -101,9 +101,12 @@
 
 static void auok1901_init(struct auok190xfb_par *par)
 {
+	struct device *dev = par->info->device;
 	struct auok190x_board *board = par->board;
 	u16 init_param = 0;
 
+	pm_runtime_get_sync(dev);
+
 	init_param |= AUOK190X_INIT_INVERSE_WHITE;
 	init_param |= AUOK190X_INIT_FORMAT0;
 	init_param |= AUOK1901_INIT_RESOLUTION(par->resolution);
@@ -113,6 +116,9 @@ static void auok1901_init(struct auok190xfb_par *par)
 
 	/* let the controller finish */
 	board->wait_for_rdy(par);
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
 }
 
 static void auok1901_update_region(struct auok190xfb_par *par, int mode,
-- 
cgit v1.2.2


From 4e0ab85bb9097ecc422d4237f9eec155993f2902 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Heiko=20St=C3=BCbner?= <heiko@sntech.de>
Date: Fri, 22 Mar 2013 15:14:22 +0100
Subject: AUO-K190x: set the correct runtime-pm state in recover
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

In the recover function the device gets powercycled and is after
this again active, independent of its previous state.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/auo_k190x.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers')

diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c
index bc0b6433eae6..17f8d099b177 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/auo_k190x.c
@@ -588,10 +588,16 @@ static int auok190x_power(struct auok190xfb_par *par, bool on)
 
 static void auok190x_recover(struct auok190xfb_par *par)
 {
+	struct device *dev = par->info->device;
+
 	auok190x_power(par, 0);
 	msleep(100);
 	auok190x_power(par, 1);
 
+	/* after powercycling the device, it's always active */
+	pm_runtime_set_active(dev);
+	par->standby = 0;
+
 	par->init(par);
 
 	/* wait for init to complete */
-- 
cgit v1.2.2


From 03fc1499f0fb28d4f70b83e8a05652129936486c Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Heiko=20St=C3=BCbner?= <heiko@sntech.de>
Date: Fri, 22 Mar 2013 15:14:52 +0100
Subject: AUO-K190x: make memory check in check_var more flexible
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Use only information from the new var to calculate the amount
of memory needed.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/auo_k190x.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c
index 17f8d099b177..e078e20d4ad6 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/auo_k190x.c
@@ -376,6 +376,9 @@ static void auok190xfb_imageblit(struct fb_info *info,
 static int auok190xfb_check_var(struct fb_var_screeninfo *var,
 				   struct fb_info *info)
 {
+	struct device *dev = info->device;
+	int size;
+
 	if (info->var.xres != var->xres || info->var.yres != var->yres ||
 	    info->var.xres_virtual != var->xres_virtual ||
 	    info->var.yres_virtual != var->yres_virtual) {
@@ -388,9 +391,10 @@ static int auok190xfb_check_var(struct fb_var_screeninfo *var,
 	 *  Memory limit
 	 */
 
-	if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) {
-		pr_info("%s: Memory Limit requested yres_virtual = %u\n",
-			 __func__, var->yres_virtual);
+	size = var->xres_virtual * var->yres_virtual * var->bits_per_pixel / 8;
+	if (size > info->fix.smem_len) {
+		dev_err(dev, "Memory limit exceeded, requested %dK\n",
+			size >> 10);
 		return -ENOMEM;
 	}
 
-- 
cgit v1.2.2


From 4ea80d35b4e0cdb23c42d2664fb745f0afe397d1 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Heiko=20St=C3=BCbner?= <heiko@sntech.de>
Date: Fri, 22 Mar 2013 15:15:27 +0100
Subject: AUO-K190x: move var resolution-handling into check_var
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Provides a central place for this, which will be helpful for
the following changes.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/auo_k190x.c | 43 ++++++++++++++++++++++---------------------
 1 file changed, 22 insertions(+), 21 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c
index e078e20d4ad6..a77513b0e18c 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/auo_k190x.c
@@ -377,16 +377,25 @@ static int auok190xfb_check_var(struct fb_var_screeninfo *var,
 				   struct fb_info *info)
 {
 	struct device *dev = info->device;
+	struct auok190xfb_par *par = info->par;
+	struct panel_info *panel = &panel_table[par->resolution];
 	int size;
 
-	if (info->var.xres != var->xres || info->var.yres != var->yres ||
-	    info->var.xres_virtual != var->xres_virtual ||
-	    info->var.yres_virtual != var->yres_virtual) {
-		pr_info("%s: Resolution not supported: X%u x Y%u\n",
-			 __func__, var->xres, var->yres);
-		return -EINVAL;
+	/*
+	 * Dimensions
+	 */
+
+	if (par->rotation & 1) {
+		var->xres = panel->h;
+		var->yres = panel->w;
+	} else {
+		var->xres = panel->w;
+		var->yres = panel->h;
 	}
 
+	var->xres_virtual = var->xres;
+	var->yres_virtual = var->yres;
+
 	/*
 	 *  Memory limit
 	 */
@@ -900,21 +909,6 @@ int auok190x_common_probe(struct platform_device *pdev,
 
 	panel = &panel_table[board->resolution];
 
-	/* if 90 degree rotation, switch width and height */
-	if (board->rotation & 1) {
-		info->var.xres = panel->h;
-		info->var.yres = panel->w;
-		info->var.xres_virtual = panel->h;
-		info->var.yres_virtual = panel->w;
-		info->fix.line_length = panel->h * info->var.bits_per_pixel / 8;
-	} else {
-		info->var.xres = panel->w;
-		info->var.yres = panel->h;
-		info->var.xres_virtual = panel->w;
-		info->var.yres_virtual = panel->h;
-		info->fix.line_length = panel->w * info->var.bits_per_pixel / 8;
-	}
-
 	par->resolution = board->resolution;
 	par->rotation = board->rotation;
 
@@ -935,6 +929,13 @@ int auok190x_common_probe(struct platform_device *pdev,
 	info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB;
 	info->fbops = &auok190xfb_ops;
 
+	ret = auok190xfb_check_var(&info->var, info);
+	if (ret)
+		goto err_defio;
+
+	info->fix.line_length = info->var.xres_virtual *
+				info->var.bits_per_pixel / 8;
+
 	/* deferred io init */
 
 	info->fbdefio = devm_kzalloc(info->device,
-- 
cgit v1.2.2


From 76de404b452305409182748568444994df765d9d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Heiko=20St=C3=BCbner?= <heiko@sntech.de>
Date: Fri, 22 Mar 2013 15:15:55 +0100
Subject: AUO-K190x: make color handling more flexible
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Don't hardcode the 8bit mode in all parts. This creates the possibility
to add another colormode easily later on.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/auo_k190x.c | 79 ++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 65 insertions(+), 14 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c
index a77513b0e18c..f7f00e34323e 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/auo_k190x.c
@@ -60,8 +60,8 @@ static void auok190x_issue_cmd(struct auok190xfb_par *par, u16 data)
 	par->board->set_ctl(par, AUOK190X_I80_DC, 1);
 }
 
-static int auok190x_issue_pixels(struct auok190xfb_par *par, int size,
-				 u16 *data)
+static int auok190x_issue_pixels_gray8(struct auok190xfb_par *par, int size,
+				       u16 *data)
 {
 	struct device *dev = par->info->device;
 	int i;
@@ -91,6 +91,21 @@ static int auok190x_issue_pixels(struct auok190xfb_par *par, int size,
 	return 0;
 }
 
+static int auok190x_issue_pixels(struct auok190xfb_par *par, int size,
+				 u16 *data)
+{
+	struct fb_info *info = par->info;
+	struct device *dev = par->info->device;
+
+	if (info->var.bits_per_pixel == 8 && info->var.grayscale)
+		auok190x_issue_pixels_gray8(par, size, data);
+	else
+		dev_err(dev, "unsupported color mode (bits: %d, gray: %d)\n",
+			info->var.bits_per_pixel, info->var.grayscale);
+
+	return 0;
+}
+
 static u16 auok190x_read_data(struct auok190xfb_par *par)
 {
 	u16 data;
@@ -381,6 +396,35 @@ static int auok190xfb_check_var(struct fb_var_screeninfo *var,
 	struct panel_info *panel = &panel_table[par->resolution];
 	int size;
 
+	/*
+	 * Color depth
+	 */
+
+	if (var->bits_per_pixel == 8 && var->grayscale == 1) {
+		/*
+		 * For 8-bit grayscale, R, G, and B offset are equal.
+		 */
+		var->red.length = 8;
+		var->red.offset = 0;
+		var->red.msb_right = 0;
+
+		var->green.length = 8;
+		var->green.offset = 0;
+		var->green.msb_right = 0;
+
+		var->blue.length = 8;
+		var->blue.offset = 0;
+		var->blue.msb_right = 0;
+
+		var->transp.length = 0;
+		var->transp.offset = 0;
+		var->transp.msb_right = 0;
+	} else {
+		dev_warn(dev, "unsupported color mode (bits: %d, grayscale: %d)\n",
+			info->var.bits_per_pixel, info->var.grayscale);
+		return -EINVAL;
+	}
+
 	/*
 	 * Dimensions
 	 */
@@ -410,6 +454,24 @@ static int auok190xfb_check_var(struct fb_var_screeninfo *var,
 	return 0;
 }
 
+static int auok190xfb_set_fix(struct fb_info *info)
+{
+	struct fb_fix_screeninfo *fix = &info->fix;
+	struct fb_var_screeninfo *var = &info->var;
+
+	fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
+
+	fix->type = FB_TYPE_PACKED_PIXELS;
+	fix->accel = FB_ACCEL_NONE;
+	fix->visual = (var->grayscale) ? FB_VISUAL_STATIC_PSEUDOCOLOR
+				       : FB_VISUAL_TRUECOLOR;
+	fix->xpanstep = 0;
+	fix->ypanstep = 0;
+	fix->ywrapstep = 0;
+
+	return 0;
+}
+
 static struct fb_ops auok190xfb_ops = {
 	.owner		= THIS_MODULE,
 	.fb_read	= fb_sys_read,
@@ -894,18 +956,8 @@ int auok190x_common_probe(struct platform_device *pdev,
 	/* initialise fix, var, resolution and rotation */
 
 	strlcpy(info->fix.id, init->id, 16);
-	info->fix.type = FB_TYPE_PACKED_PIXELS;
-	info->fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR;
-	info->fix.xpanstep = 0;
-	info->fix.ypanstep = 0;
-	info->fix.ywrapstep = 0;
-	info->fix.accel = FB_ACCEL_NONE;
-
 	info->var.bits_per_pixel = 8;
 	info->var.grayscale = 1;
-	info->var.red.length = 8;
-	info->var.green.length = 8;
-	info->var.blue.length = 8;
 
 	panel = &panel_table[board->resolution];
 
@@ -933,8 +985,7 @@ int auok190x_common_probe(struct platform_device *pdev,
 	if (ret)
 		goto err_defio;
 
-	info->fix.line_length = info->var.xres_virtual *
-				info->var.bits_per_pixel / 8;
+	auok190xfb_set_fix(info);
 
 	/* deferred io init */
 
-- 
cgit v1.2.2


From 46574c72c701e45da1e0a2e944df885fcd2db668 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Heiko=20St=C3=BCbner?= <heiko@sntech.de>
Date: Fri, 22 Mar 2013 15:16:29 +0100
Subject: AUO-K190x: add a 16bit truecolor mode
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Some applications seem to have problems using the 8bit grayscale mode.
Therefore provide a 16bit truecolor mode which also gets converted to
the 4bit grayscale the display uses, when updating a region.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/auo_k190x.c | 71 +++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 69 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c
index f7f00e34323e..c2a945183a5d 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/auo_k190x.c
@@ -60,6 +60,46 @@ static void auok190x_issue_cmd(struct auok190xfb_par *par, u16 data)
 	par->board->set_ctl(par, AUOK190X_I80_DC, 1);
 }
 
+/**
+ * Conversion of 16bit color to 4bit grayscale
+ * does roughly (0.3 * R + 0.6 G + 0.1 B) / 2
+ */
+static inline int rgb565_to_gray4(u16 data, struct fb_var_screeninfo *var)
+{
+	return ((((data & 0xF800) >> var->red.offset) * 77 +
+		 ((data & 0x07E0) >> (var->green.offset + 1)) * 151 +
+		 ((data & 0x1F) >> var->blue.offset) * 28) >> 8 >> 1);
+}
+
+static int auok190x_issue_pixels_rgb565(struct auok190xfb_par *par, int size,
+					u16 *data)
+{
+	struct fb_var_screeninfo *var = &par->info->var;
+	struct device *dev = par->info->device;
+	int i;
+	u16 tmp;
+
+	if (size & 7) {
+		dev_err(dev, "issue_pixels: size %d must be a multiple of 8\n",
+			size);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < (size >> 2); i++) {
+		par->board->set_ctl(par, AUOK190X_I80_WR, 0);
+
+		tmp  = (rgb565_to_gray4(data[4*i], var) & 0x000F);
+		tmp |= (rgb565_to_gray4(data[4*i+1], var) << 4) & 0x00F0;
+		tmp |= (rgb565_to_gray4(data[4*i+2], var) << 8) & 0x0F00;
+		tmp |= (rgb565_to_gray4(data[4*i+3], var) << 12) & 0xF000;
+
+		par->board->set_hdb(par, tmp);
+		par->board->set_ctl(par, AUOK190X_I80_WR, 1);
+	}
+
+	return 0;
+}
+
 static int auok190x_issue_pixels_gray8(struct auok190xfb_par *par, int size,
 				       u16 *data)
 {
@@ -99,6 +139,8 @@ static int auok190x_issue_pixels(struct auok190xfb_par *par, int size,
 
 	if (info->var.bits_per_pixel == 8 && info->var.grayscale)
 		auok190x_issue_pixels_gray8(par, size, data);
+	else if (info->var.bits_per_pixel == 16)
+		auok190x_issue_pixels_rgb565(par, size, data);
 	else
 		dev_err(dev, "unsupported color mode (bits: %d, gray: %d)\n",
 			info->var.bits_per_pixel, info->var.grayscale);
@@ -416,6 +458,22 @@ static int auok190xfb_check_var(struct fb_var_screeninfo *var,
 		var->blue.offset = 0;
 		var->blue.msb_right = 0;
 
+		var->transp.length = 0;
+		var->transp.offset = 0;
+		var->transp.msb_right = 0;
+	} else if (var->bits_per_pixel == 16) {
+		var->red.length = 5;
+		var->red.offset = 11;
+		var->red.msb_right = 0;
+
+		var->green.length = 6;
+		var->green.offset = 5;
+		var->green.msb_right = 0;
+
+		var->blue.length = 5;
+		var->blue.offset = 0;
+		var->blue.msb_right = 0;
+
 		var->transp.length = 0;
 		var->transp.offset = 0;
 		var->transp.msb_right = 0;
@@ -472,6 +530,15 @@ static int auok190xfb_set_fix(struct fb_info *info)
 	return 0;
 }
 
+static int auok190xfb_set_par(struct fb_info *info)
+{
+	struct auok190xfb_par *par = info->par;
+
+	auok190xfb_set_fix(info);
+
+	return 0;
+}
+
 static struct fb_ops auok190xfb_ops = {
 	.owner		= THIS_MODULE,
 	.fb_read	= fb_sys_read,
@@ -480,6 +547,7 @@ static struct fb_ops auok190xfb_ops = {
 	.fb_copyarea	= auok190xfb_copyarea,
 	.fb_imageblit	= auok190xfb_imageblit,
 	.fb_check_var	= auok190xfb_check_var,
+	.fb_set_par     = auok190xfb_set_par,
 };
 
 /*
@@ -966,8 +1034,7 @@ int auok190x_common_probe(struct platform_device *pdev,
 
 	/* videomemory handling */
 
-	videomemorysize = roundup((panel->w * panel->h) *
-				info->var.bits_per_pixel / 8, PAGE_SIZE);
+	videomemorysize = roundup((panel->w * panel->h) * 2, PAGE_SIZE);
 	videomemory = vmalloc(videomemorysize);
 	if (!videomemory) {
 		ret = -ENOMEM;
-- 
cgit v1.2.2


From fd3871aa5c0d108b89858263254b49d9bca2dc53 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Heiko=20St=C3=BCbner?= <heiko@sntech.de>
Date: Fri, 22 Mar 2013 15:17:00 +0100
Subject: AUO-K190x: add framebuffer rotation support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Change the driver to use the framebuffer rotation functions to be
able to change the rotation at runtime.

This also removes the setting of the rotation via the platform data.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/auo_k190x.c | 25 ++++++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c
index c2a945183a5d..baf213cdbe3d 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/auo_k190x.c
@@ -487,12 +487,20 @@ static int auok190xfb_check_var(struct fb_var_screeninfo *var,
 	 * Dimensions
 	 */
 
-	if (par->rotation & 1) {
-		var->xres = panel->h;
-		var->yres = panel->w;
-	} else {
+	switch (var->rotate) {
+	case FB_ROTATE_UR:
+	case FB_ROTATE_UD:
 		var->xres = panel->w;
 		var->yres = panel->h;
+		break;
+	case FB_ROTATE_CW:
+	case FB_ROTATE_CCW:
+		var->xres = panel->h;
+		var->yres = panel->w;
+		break;
+	default:
+		dev_dbg(dev, "Invalid rotation request\n");
+		return -EINVAL;
 	}
 
 	var->xres_virtual = var->xres;
@@ -534,8 +542,15 @@ static int auok190xfb_set_par(struct fb_info *info)
 {
 	struct auok190xfb_par *par = info->par;
 
+	par->rotation = info->var.rotate;
 	auok190xfb_set_fix(info);
 
+	/* reinit the controller to honor the rotation */
+	par->init(par);
+
+	/* wait for init to complete */
+	par->board->wait_for_rdy(par);
+
 	return 0;
 }
 
@@ -1030,7 +1045,7 @@ int auok190x_common_probe(struct platform_device *pdev,
 	panel = &panel_table[board->resolution];
 
 	par->resolution = board->resolution;
-	par->rotation = board->rotation;
+	par->rotation = 0;
 
 	/* videomemory handling */
 
-- 
cgit v1.2.2


From b61f232ff09b6cff22d5186001027438c620da39 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Heiko=20St=C3=BCbner?= <heiko@sntech.de>
Date: Fri, 22 Mar 2013 15:17:32 +0100
Subject: AUO-K190x: Add resolutions for portrait displays
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The controller also contains support for displays in a portrait
orientation and it seems devices which such displays really reached
the market - Pandigital Novell seems to be one example.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/auo_k190x.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers')

diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c
index baf213cdbe3d..b1f19b266da7 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/auo_k190x.c
@@ -40,6 +40,14 @@ static struct panel_info panel_table[] = {
 		.w = 1024,
 		.h = 768,
 	},
+	[AUOK190X_RESOLUTION_600_800] = {
+		.w = 600,
+		.h = 800,
+	},
+	[AUOK190X_RESOLUTION_768_1024] = {
+		.w = 768,
+		.h = 1024,
+	},
 };
 
 /*
-- 
cgit v1.2.2


From 8e524c95040aa521283aba126c047381eadaed39 Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Mon, 8 Apr 2013 13:04:00 +0300
Subject: video: wm8505fb: Convert to devm_ioremap_resource()

Use the newly introduced devm_ioremap_resource() instead of
devm_request_and_ioremap() which provides more consistent error handling.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/wm8505fb.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index 19e2e7ff492a..01f9ace068e2 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -18,6 +18,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/fb.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -303,9 +304,9 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	fbi->fb.pseudo_palette	= addr;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	fbi->regbase = devm_request_and_ioremap(&pdev->dev, res);
-	if (fbi->regbase == NULL)
-		return -EBUSY;
+	fbi->regbase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(fbi->regbase))
+		return PTR_ERR(fbi->regbase);
 
 	disp_timing = of_get_display_timings(pdev->dev.of_node);
 	if (!disp_timing)
-- 
cgit v1.2.2


From cd19965a5e80abfa1a83a1fdc35f38c93972e209 Mon Sep 17 00:00:00 2001
From: Paul Bolle <pebolle@tiscali.nl>
Date: Tue, 19 Mar 2013 11:07:57 +0100
Subject: ARM: OMAP: remove "config FB_OMAP_CONSISTENT_DMA_SIZE"

The only user of Kconfig symbol FB_OMAP_CONSISTENT_DMA_SIZE got removed
in v3.8, with commit 6ba54ab4a49bbad736b0254aa6bdf0cb83013815 ("ARM:
OMAP: Remove omap_init_consistent_dma_size()"). Remove this symbol too.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap/Kconfig | 11 -----------
 1 file changed, 11 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
index e512581300fc..0bc3a936ce2b 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -39,17 +39,6 @@ config FB_OMAP_LCD_MIPID
 	  the Mobile Industry Processor Interface DBI-C/DCS
 	  specification. (Supported LCDs: Philips LPH8923, Sharp LS041Y3)
 
-config FB_OMAP_CONSISTENT_DMA_SIZE
-	int "Consistent DMA memory size (MB)"
-	depends on FB_OMAP
-	range 1 14
-	default 2
-	help
-	  Increase the DMA consistent memory size according to your video
-	  memory needs, for example if you want to use multiple planes.
-	  The size must be 2MB aligned.
-	  If unsure say 1.
-
 config FB_OMAP_DMA_TUNE
         bool "Set DMA SDRAM access priority high"
         depends on FB_OMAP
-- 
cgit v1.2.2


From 3ccbf89f4d86cc8f4d6645fa5db0327ef835777b Mon Sep 17 00:00:00 2001
From: Fabio Porcedda <fabio.porcedda@gmail.com>
Date: Fri, 15 Mar 2013 14:02:38 +0100
Subject: drivers: video: use module_platform_driver_probe()

This patch converts the drivers to use the
module_platform_driver_probe() macro which makes the code smaller and
a bit simpler.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> # atmel_lcdfb.c
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # amifb.c
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/amifb.c          | 14 +-------------
 drivers/video/atmel_lcdfb.c    | 13 +------------
 drivers/video/omap2/vrfb.c     | 13 +------------
 drivers/video/sh_mipi_dsi.c    | 12 +-----------
 drivers/video/sh_mobile_hdmi.c | 12 +-----------
 5 files changed, 5 insertions(+), 59 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/amifb.c b/drivers/video/amifb.c
index 7fa1bf823729..77cb4ffa1fe4 100644
--- a/drivers/video/amifb.c
+++ b/drivers/video/amifb.c
@@ -3788,19 +3788,7 @@ static struct platform_driver amifb_driver = {
 	},
 };
 
-static int __init amifb_init(void)
-{
-	return platform_driver_probe(&amifb_driver, amifb_probe);
-}
-
-module_init(amifb_init);
-
-static void __exit amifb_exit(void)
-{
-	platform_driver_unregister(&amifb_driver);
-}
-
-module_exit(amifb_exit);
+module_platform_driver_probe(amifb_driver, amifb_probe);
 
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:amiga-video");
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 025428e04c33..98348ec0b3ce 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -1158,18 +1158,7 @@ static struct platform_driver atmel_lcdfb_driver = {
 	},
 };
 
-static int __init atmel_lcdfb_init(void)
-{
-	return platform_driver_probe(&atmel_lcdfb_driver, atmel_lcdfb_probe);
-}
-
-static void __exit atmel_lcdfb_exit(void)
-{
-	platform_driver_unregister(&atmel_lcdfb_driver);
-}
-
-module_init(atmel_lcdfb_init);
-module_exit(atmel_lcdfb_exit);
+module_platform_driver_probe(atmel_lcdfb_driver, atmel_lcdfb_probe);
 
 MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
 MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/omap2/vrfb.c
index 10560efeb35a..5261229c79af 100644
--- a/drivers/video/omap2/vrfb.c
+++ b/drivers/video/omap2/vrfb.c
@@ -397,18 +397,7 @@ static struct platform_driver vrfb_driver = {
 	.remove		= __exit_p(vrfb_remove),
 };
 
-static int __init vrfb_init(void)
-{
-	return platform_driver_probe(&vrfb_driver, &vrfb_probe);
-}
-
-static void __exit vrfb_exit(void)
-{
-	platform_driver_unregister(&vrfb_driver);
-}
-
-module_init(vrfb_init);
-module_exit(vrfb_exit);
+module_platform_driver_probe(vrfb_driver, vrfb_probe);
 
 MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
 MODULE_DESCRIPTION("OMAP VRFB");
diff --git a/drivers/video/sh_mipi_dsi.c b/drivers/video/sh_mipi_dsi.c
index 701b461cf8a9..6cad53075e99 100644
--- a/drivers/video/sh_mipi_dsi.c
+++ b/drivers/video/sh_mipi_dsi.c
@@ -581,17 +581,7 @@ static struct platform_driver sh_mipi_driver = {
 	},
 };
 
-static int __init sh_mipi_init(void)
-{
-	return platform_driver_probe(&sh_mipi_driver, sh_mipi_probe);
-}
-module_init(sh_mipi_init);
-
-static void __exit sh_mipi_exit(void)
-{
-	platform_driver_unregister(&sh_mipi_driver);
-}
-module_exit(sh_mipi_exit);
+module_platform_driver_probe(sh_mipi_driver, sh_mipi_probe);
 
 MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
 MODULE_DESCRIPTION("SuperH / ARM-shmobile MIPI DSI driver");
diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
index 930e550e752a..bfe4728480fd 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -1445,17 +1445,7 @@ static struct platform_driver sh_hdmi_driver = {
 	},
 };
 
-static int __init sh_hdmi_init(void)
-{
-	return platform_driver_probe(&sh_hdmi_driver, sh_hdmi_probe);
-}
-module_init(sh_hdmi_init);
-
-static void __exit sh_hdmi_exit(void)
-{
-	platform_driver_unregister(&sh_hdmi_driver);
-}
-module_exit(sh_hdmi_exit);
+module_platform_driver_probe(sh_hdmi_driver, sh_hdmi_probe);
 
 MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
 MODULE_DESCRIPTION("SuperH / ARM-shmobile HDMI driver");
-- 
cgit v1.2.2


From 38dd2daf297a4543344b6c473f3e80b362430a4b Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@tabi.org>
Date: Sat, 30 Mar 2013 02:36:00 +0200
Subject: drivers/video: fsl-diu-fb: add hardware cursor support

The Freescale DIU supports a 32x32 color hardware cursor.  Framebuffer
cursors are monochrome, so the driver converts the image data to the
format that the DIU expects and then programs to hardware accordingly.

The support cursor enabling/disabling, we provide two cursor image buffers.
One is always blank (all zeroes), and the other contains the real cursor
image data.  To disable the cursor (used typically for cursor blinking),
we just tell the hardware to use the blank cursor data.

Signed-off-by: Timur Tabi <timur@tabi.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/fsl-diu-fb.c | 157 ++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 155 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index 41fbd9453c5f..6c278056fc60 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -375,7 +375,10 @@ struct fsl_diu_data {
 	struct diu_ad dummy_ad __aligned(8);
 	struct diu_ad ad[NUM_AOIS] __aligned(8);
 	u8 gamma[256 * 3] __aligned(32);
-	u8 cursor[MAX_CURS * MAX_CURS * 2] __aligned(32);
+	/* It's easier to parse the cursor data as little-endian */
+	__le16 cursor[MAX_CURS * MAX_CURS] __aligned(32);
+	/* Blank cursor data -- used to hide the cursor */
+	__le16 blank_cursor[MAX_CURS * MAX_CURS] __aligned(32);
 	uint8_t edid_data[EDID_LENGTH];
 	bool has_edid;
 } __aligned(32);
@@ -824,7 +827,6 @@ static void update_lcdc(struct fb_info *info)
 	/* Program DIU registers */
 
 	out_be32(&hw->gamma, DMA_ADDR(data, gamma));
-	out_be32(&hw->cursor, DMA_ADDR(data, cursor));
 
 	out_be32(&hw->bgnd, 0x007F7F7F); /* Set background to grey */
 	out_be32(&hw->disp_size, (var->yres << 16) | var->xres);
@@ -967,6 +969,156 @@ static u32 fsl_diu_get_pixel_format(unsigned int bits_per_pixel)
 	}
 }
 
+/*
+ * Copies a cursor image from user space to the proper place in driver
+ * memory so that the hardware can display the cursor image.
+ *
+ * Cursor data is represented as a sequence of 'width' bits packed into bytes.
+ * That is, the first 8 bits are in the first byte, the second 8 bits in the
+ * second byte, and so on.  Therefore, the each row of the cursor is (width +
+ * 7) / 8 bytes of 'data'
+ *
+ * The DIU only supports cursors up to 32x32 (MAX_CURS).  We reject cursors
+ * larger than this, so we already know that 'width' <= 32.  Therefore, we can
+ * simplify our code by using a 32-bit big-endian integer ("line") to read in
+ * a single line of pixels, and only look at the top 'width' bits of that
+ * integer.
+ *
+ * This could result in an unaligned 32-bit read.  For example, if the cursor
+ * is 24x24, then the first three bytes of 'image' contain the pixel data for
+ * the top line of the cursor.  We do a 32-bit read of 'image', but we look
+ * only at the top 24 bits.  Then we increment 'image' by 3 bytes.  The next
+ * read is unaligned.  The only problem is that we might read past the end of
+ * 'image' by 1-3 bytes, but that should not cause any problems.
+ */
+static void fsl_diu_load_cursor_image(struct fb_info *info,
+	const void *image, uint16_t bg, uint16_t fg,
+	unsigned int width, unsigned int height)
+{
+	struct mfb_info *mfbi = info->par;
+	struct fsl_diu_data *data = mfbi->parent;
+	__le16 *cursor = data->cursor;
+	__le16 _fg = cpu_to_le16(fg);
+	__le16 _bg = cpu_to_le16(bg);
+	unsigned int h, w;
+
+	for (h = 0; h < height; h++) {
+		uint32_t mask = 1 << 31;
+		uint32_t line = be32_to_cpup(image);
+
+		for (w = 0; w < width; w++) {
+			cursor[w] = (line & mask) ? _fg : _bg;
+			mask >>= 1;
+		}
+
+		cursor += MAX_CURS;
+		image += DIV_ROUND_UP(width, 8);
+	}
+}
+
+/*
+ * Set a hardware cursor.  The image data for the cursor is passed via the
+ * fb_cursor object.
+ */
+static int fsl_diu_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+	struct mfb_info *mfbi = info->par;
+	struct fsl_diu_data *data = mfbi->parent;
+	struct diu __iomem *hw = data->diu_reg;
+
+	if (cursor->image.width > MAX_CURS || cursor->image.height > MAX_CURS)
+		return -EINVAL;
+
+	/* The cursor size has changed */
+	if (cursor->set & FB_CUR_SETSIZE) {
+		/*
+		 * The DIU cursor is a fixed size, so when we get this
+		 * message, instead of resizing the cursor, we just clear
+		 * all the image data, in expectation of new data.  However,
+		 * in tests this control does not appear to be normally
+		 * called.
+		 */
+		memset(data->cursor, 0, sizeof(data->cursor));
+	}
+
+	/* The cursor position has changed (cursor->image.dx|dy) */
+	if (cursor->set & FB_CUR_SETPOS) {
+		uint32_t xx, yy;
+
+		yy = (cursor->image.dy - info->var.yoffset) & 0x7ff;
+		xx = (cursor->image.dx - info->var.xoffset) & 0x7ff;
+
+		out_be32(&hw->curs_pos, yy << 16 | xx);
+	}
+
+	/*
+	 * FB_CUR_SETIMAGE - the cursor image has changed
+	 * FB_CUR_SETCMAP  - the cursor colors has changed
+	 * FB_CUR_SETSHAPE - the cursor bitmask has changed
+	 */
+	if (cursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETCMAP | FB_CUR_SETIMAGE)) {
+		unsigned int image_size =
+			DIV_ROUND_UP(cursor->image.width, 8) * cursor->image.height;
+		unsigned int image_words =
+			DIV_ROUND_UP(image_size, sizeof(uint32_t));
+		unsigned int bg_idx = cursor->image.bg_color;
+		unsigned int fg_idx = cursor->image.fg_color;
+		uint8_t buffer[image_size];
+		uint32_t *image, *source, *mask;
+		uint16_t fg, bg;
+		unsigned int i;
+
+		if (info->state != FBINFO_STATE_RUNNING)
+			return 0;
+
+		/*
+		 * Determine the size of the cursor image data.  Normally,
+		 * it's 8x16.
+		 */
+		image_size = DIV_ROUND_UP(cursor->image.width, 8) *
+			cursor->image.height;
+
+		bg = ((info->cmap.red[bg_idx] & 0xf8) << 7) |
+		     ((info->cmap.green[bg_idx] & 0xf8) << 2) |
+		     ((info->cmap.blue[bg_idx] & 0xf8) >> 3) |
+		     1 << 15;
+
+		fg = ((info->cmap.red[fg_idx] & 0xf8) << 7) |
+		     ((info->cmap.green[fg_idx] & 0xf8) << 2) |
+		     ((info->cmap.blue[fg_idx] & 0xf8) >> 3) |
+		     1 << 15;
+
+		/* Use 32-bit operations on the data to improve performance */
+		image = (uint32_t *)buffer;
+		source = (uint32_t *)cursor->image.data;
+		mask = (uint32_t *)cursor->mask;
+
+		if (cursor->rop == ROP_XOR)
+			for (i = 0; i < image_words; i++)
+				image[i] = source[i] ^ mask[i];
+		else
+			for (i = 0; i < image_words; i++)
+				image[i] = source[i] & mask[i];
+
+		fsl_diu_load_cursor_image(info, image, bg, fg,
+			cursor->image.width, cursor->image.height);
+	};
+
+	/*
+	 * Show or hide the cursor.  The cursor data is always stored in the
+	 * 'cursor' memory block, and the actual cursor position is always in
+	 * the DIU's CURS_POS register.  To hide the cursor, we redirect the
+	 * CURSOR register to a blank cursor.  The show the cursor, we
+	 * redirect the CURSOR register to the real cursor data.
+	 */
+	if (cursor->enable)
+		out_be32(&hw->cursor, DMA_ADDR(data, cursor));
+	else
+		out_be32(&hw->cursor, DMA_ADDR(data, blank_cursor));
+
+	return 0;
+}
+
 /*
  * Using the fb_var_screeninfo in fb_info we set the resolution of this
  * particular framebuffer. This function alters the fb_fix_screeninfo stored
@@ -1312,6 +1464,7 @@ static struct fb_ops fsl_diu_ops = {
 	.fb_ioctl = fsl_diu_ioctl,
 	.fb_open = fsl_diu_open,
 	.fb_release = fsl_diu_release,
+	.fb_cursor = fsl_diu_cursor,
 };
 
 static int install_fb(struct fb_info *info)
-- 
cgit v1.2.2


From 015623819b44a3b25347c9de3efd9ad01d475259 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 11 Apr 2013 02:04:54 +0200
Subject: video/exynos: remove unnecessary header inclusions

In multiplatform configurations, we cannot include headers
provided by only the exynos platform. Fortunately a number
of drivers that include those headers do not actually need
them, so we can just remove the inclusions.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-fbdev@vger.kernel.org
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/exynos/exynos_mipi_dsi.c          | 2 --
 drivers/video/exynos/exynos_mipi_dsi_common.c   | 2 --
 drivers/video/exynos/exynos_mipi_dsi_lowlevel.c | 2 --
 3 files changed, 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/exynos/exynos_mipi_dsi.c b/drivers/video/exynos/exynos_mipi_dsi.c
index fac7df6d1aba..3dd43ca2b95f 100644
--- a/drivers/video/exynos/exynos_mipi_dsi.c
+++ b/drivers/video/exynos/exynos_mipi_dsi.c
@@ -35,8 +35,6 @@
 
 #include <video/exynos_mipi_dsim.h>
 
-#include <plat/fb.h>
-
 #include "exynos_mipi_dsi_common.h"
 #include "exynos_mipi_dsi_lowlevel.h"
 
diff --git a/drivers/video/exynos/exynos_mipi_dsi_common.c b/drivers/video/exynos/exynos_mipi_dsi_common.c
index c70cb8926df6..520fc9bd887b 100644
--- a/drivers/video/exynos/exynos_mipi_dsi_common.c
+++ b/drivers/video/exynos/exynos_mipi_dsi_common.c
@@ -31,8 +31,6 @@
 #include <video/mipi_display.h>
 #include <video/exynos_mipi_dsim.h>
 
-#include <mach/map.h>
-
 #include "exynos_mipi_dsi_regs.h"
 #include "exynos_mipi_dsi_lowlevel.h"
 #include "exynos_mipi_dsi_common.h"
diff --git a/drivers/video/exynos/exynos_mipi_dsi_lowlevel.c b/drivers/video/exynos/exynos_mipi_dsi_lowlevel.c
index 95cb99a1fe2d..15c5abd408dc 100644
--- a/drivers/video/exynos/exynos_mipi_dsi_lowlevel.c
+++ b/drivers/video/exynos/exynos_mipi_dsi_lowlevel.c
@@ -26,8 +26,6 @@
 
 #include <video/exynos_mipi_dsim.h>
 
-#include <mach/map.h>
-
 #include "exynos_mipi_dsi_regs.h"
 
 void exynos_mipi_dsi_func_reset(struct mipi_dsim_device *dsim)
-- 
cgit v1.2.2


From bbfce37b3ea11d13a984063a162c898a5fb23b1e Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 11 Apr 2013 02:04:55 +0200
Subject: video/s3c: move platform_data out of arch/arm

The s3c-fb driver requires header files from the samsung platforms
to find its platform_data definition, but this no longer works on
multiplatform kernels, so let's move the data into a new header
file under include/linux/platform_data.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-fbdev@vger.kernel.org
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/s3c-fb.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 968a62571df7..2e7991c7ca08 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -24,10 +24,9 @@
 #include <linux/uaccess.h>
 #include <linux/interrupt.h>
 #include <linux/pm_runtime.h>
+#include <linux/platform_data/video_s3c.h>
 
 #include <video/samsung_fimd.h>
-#include <mach/map.h>
-#include <plat/fb.h>
 
 /* This driver will export a number of framebuffer interfaces depending
  * on the configuration passed in via the platform data. Each fb instance
-- 
cgit v1.2.2


From e45f265e7ea3ee6de24efe91fe2928d603cb1741 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 5 Apr 2013 11:12:50 +0300
Subject: video: vt8500: fix Kconfig for videomode

OF_DISPLAY_TIMING and OF_VIDEOMODE Kconfig entries have been removed,
and VIDEOMODE_HELPERS should be used now. Fix the Kconfig for VT8500
driver to reflect this.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/Kconfig | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 714d32a279e2..8bda6131ae3e 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1777,8 +1777,7 @@ config FB_VT8500
 	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT
 	select FB_MODE_HELPERS
-	select OF_DISPLAY_TIMING
-	select OF_VIDEOMODE
+	select VIDEOMODE_HELPERS
 	help
 	  This is the framebuffer driver for VIA VT8500 integrated LCD
 	  controller.
@@ -1790,8 +1789,7 @@ config FB_WM8505
 	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT
 	select FB_MODE_HELPERS
-	select OF_DISPLAY_TIMING
-	select OF_VIDEOMODE
+	select VIDEOMODE_HELPERS
 	help
 	  This is the framebuffer driver for WonderMedia WM8xxx-series
 	  integrated LCD controller. This driver covers the WM8505, WM8650
-- 
cgit v1.2.2


From 6d28c21fe7b0921af57b15673cbafd4d61f2653d Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 17 Apr 2013 13:05:07 +0300
Subject: fbdev/omapfb: use vm_iomap_memory()

Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/omapfb/omapfb-main.c | 30 +++++++-----------------------
 1 file changed, 7 insertions(+), 23 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index ca585ef37f25..717f13a93351 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -1101,41 +1101,25 @@ static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 	struct fb_fix_screeninfo *fix = &fbi->fix;
 	struct omapfb2_mem_region *rg;
-	unsigned long off;
 	unsigned long start;
 	u32 len;
-	int r = -EINVAL;
-
-	if (vma->vm_end - vma->vm_start == 0)
-		return 0;
-	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
-		return -EINVAL;
-	off = vma->vm_pgoff << PAGE_SHIFT;
+	int r;
 
 	rg = omapfb_get_mem_region(ofbi->region);
 
 	start = omapfb_get_region_paddr(ofbi);
 	len = fix->smem_len;
-	if (off >= len)
-		goto error;
-	if ((vma->vm_end - vma->vm_start + off) > len)
-		goto error;
-
-	off += start;
 
-	DBG("user mmap region start %lx, len %d, off %lx\n", start, len, off);
+	DBG("user mmap region start %lx, len %d, off %lx\n", start, len,
+			vma->vm_pgoff << PAGE_SHIFT);
 
-	vma->vm_pgoff = off >> PAGE_SHIFT;
-	/* VM_IO | VM_DONTEXPAND | VM_DONTDUMP are set by remap_pfn_range() */
 	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
 	vma->vm_ops = &mmap_user_ops;
 	vma->vm_private_data = rg;
-	if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
-			       vma->vm_end - vma->vm_start,
-			       vma->vm_page_prot)) {
-		r = -EAGAIN;
+
+	r = vm_iomap_memory(vma, start, len);
+	if (r)
 		goto error;
-	}
 
 	/* vm_ops.open won't be called for mmap itself. */
 	atomic_inc(&rg->map_count);
@@ -1144,7 +1128,7 @@ static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
 
 	return 0;
 
- error:
+error:
 	omapfb_put_mem_region(ofbi->region);
 
 	return r;
-- 
cgit v1.2.2


From 47f698a9f2fc49711f3a43ca6713e83f0e76ea5e Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 17 Apr 2013 13:44:19 +0300
Subject: fbdev/controlfb: use vm_iomap_memory()

Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/controlfb.c | 50 +++++++++++++++++++----------------------------
 1 file changed, 20 insertions(+), 30 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/controlfb.c b/drivers/video/controlfb.c
index 0c189b32a4c5..67b77b40aa7f 100644
--- a/drivers/video/controlfb.c
+++ b/drivers/video/controlfb.c
@@ -285,36 +285,26 @@ static int controlfb_pan_display(struct fb_var_screeninfo *var,
 static int controlfb_mmap(struct fb_info *info,
                        struct vm_area_struct *vma)
 {
-       unsigned long off, start;
-       u32 len;
-
-       off = vma->vm_pgoff << PAGE_SHIFT;
-
-       /* frame buffer memory */
-       start = info->fix.smem_start;
-       len = PAGE_ALIGN((start & ~PAGE_MASK)+info->fix.smem_len);
-       if (off >= len) {
-               /* memory mapped io */
-               off -= len;
-               if (info->var.accel_flags)
-                       return -EINVAL;
-               start = info->fix.mmio_start;
-               len = PAGE_ALIGN((start & ~PAGE_MASK)+info->fix.mmio_len);
-	       vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-       } else {
-               /* framebuffer */
-	       vma->vm_page_prot = pgprot_cached_wthru(vma->vm_page_prot);
-       }
-       start &= PAGE_MASK;
-       if ((vma->vm_end - vma->vm_start + off) > len)
-       		return -EINVAL;
-       off += start;
-       vma->vm_pgoff = off >> PAGE_SHIFT;
-       if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
-           vma->vm_end - vma->vm_start, vma->vm_page_prot))
-               return -EAGAIN;
-
-       return 0;
+	unsigned long mmio_pgoff;
+	unsigned long start;
+	u32 len;
+
+	start = info->fix.smem_start;
+	len = info->fix.smem_len;
+	mmio_pgoff = PAGE_ALIGN((start & ~PAGE_MASK) + len) >> PAGE_SHIFT;
+	if (vma->vm_pgoff >= mmio_pgoff) {
+		if (info->var.accel_flags)
+			return -EINVAL;
+		vma->vm_pgoff -= mmio_pgoff;
+		start = info->fix.mmio_start;
+		len = info->fix.mmio_len;
+		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+	} else {
+		/* framebuffer */
+		vma->vm_page_prot = pgprot_cached_wthru(vma->vm_page_prot);
+	}
+
+	return vm_iomap_memory(vma, start, len);
 }
 
 static int controlfb_blank(int blank_mode, struct fb_info *info)
-- 
cgit v1.2.2


From 7b3d1c82417b340c73e416db10770379291010ba Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 17 Apr 2013 13:48:43 +0300
Subject: fbdev/fb-puv3: use vm_iomap_memory()

Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
---
 drivers/video/fb-puv3.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/fb-puv3.c b/drivers/video/fb-puv3.c
index 7d106f1f4906..27fc956166fa 100644
--- a/drivers/video/fb-puv3.c
+++ b/drivers/video/fb-puv3.c
@@ -640,21 +640,9 @@ static int unifb_pan_display(struct fb_var_screeninfo *var,
 int unifb_mmap(struct fb_info *info,
 		    struct vm_area_struct *vma)
 {
-	unsigned long size = vma->vm_end - vma->vm_start;
-	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
-	unsigned long pos = info->fix.smem_start + offset;
-
-	if (offset + size > info->fix.smem_len)
-		return -EINVAL;
-
 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
 
-	if (io_remap_pfn_range(vma, vma->vm_start, pos >> PAGE_SHIFT, size,
-				vma->vm_page_prot))
-		return -EAGAIN;
-
-	/* VM_IO | VM_DONTEXPAND | VM_DONTDUMP are set by remap_pfn_range() */
-	return 0;
+	return vm_iomap_memory(vma, info->fix.smem_start, info->fix.smem_len);
 }
 
 static struct fb_ops unifb_ops = {
-- 
cgit v1.2.2


From 51fc8e8aabf1dc89934743c62069acbbe2016fe9 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 17 Apr 2013 13:55:59 +0300
Subject: fbdev/sa1100fb: use vm_iomap_memory()

Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/video/sa1100fb.c | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index cfbde5e85cbf..f34c858642e8 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -556,7 +556,7 @@ static int sa1100fb_mmap(struct fb_info *info,
 			 struct vm_area_struct *vma)
 {
 	struct sa1100fb_info *fbi = (struct sa1100fb_info *)info;
-	unsigned long start, len, off = vma->vm_pgoff << PAGE_SHIFT;
+	unsigned long off = vma->vm_pgoff << PAGE_SHIFT;
 
 	if (off < info->fix.smem_len) {
 		vma->vm_pgoff += 1; /* skip over the palette */
@@ -564,19 +564,9 @@ static int sa1100fb_mmap(struct fb_info *info,
 					     fbi->map_dma, fbi->map_size);
 	}
 
-	start = info->fix.mmio_start;
-	len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.mmio_len);
-
-	if ((vma->vm_end - vma->vm_start + off) > len)
-		return -EINVAL;
-
-	off += start & PAGE_MASK;
-	vma->vm_pgoff = off >> PAGE_SHIFT;
-	vma->vm_flags |= VM_IO;
 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-	return io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
-				   vma->vm_end - vma->vm_start,
-				   vma->vm_page_prot);
+
+	return vm_iomap_memory(vma, info->fix.mmio_start, info->fix.mmio_len);
 }
 
 static struct fb_ops sa1100fb_ops = {
-- 
cgit v1.2.2


From 5171774382959f9a42ecd36bf408f6979effcb6a Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 18 Apr 2013 07:47:47 +0300
Subject: fbdev/vermillion: use vm_iomap_memory()

Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alan Hourihane <alanh@fairlite.demon.co.uk>
---
 drivers/video/vermilion/vermilion.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/vermilion/vermilion.c b/drivers/video/vermilion/vermilion.c
index 0aa516fc59cd..09a136633f35 100644
--- a/drivers/video/vermilion/vermilion.c
+++ b/drivers/video/vermilion/vermilion.c
@@ -1003,24 +1003,18 @@ static int vmlfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 static int vmlfb_mmap(struct fb_info *info, struct vm_area_struct *vma)
 {
 	struct vml_info *vinfo = container_of(info, struct vml_info, info);
-	unsigned long size = vma->vm_end - vma->vm_start;
 	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
 	int ret;
 
-	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
-		return -EINVAL;
-	if (offset + size > vinfo->vram_contig_size)
-		return -EINVAL;
 	ret = vmlfb_vram_offset(vinfo, offset);
 	if (ret)
 		return -EINVAL;
-	offset += vinfo->vram_start;
+
 	pgprot_val(vma->vm_page_prot) |= _PAGE_PCD;
 	pgprot_val(vma->vm_page_prot) &= ~_PAGE_PWT;
-	if (remap_pfn_range(vma, vma->vm_start, offset >> PAGE_SHIFT,
-						size, vma->vm_page_prot))
-		return -EAGAIN;
-	return 0;
+
+	return vm_iomap_memory(vma, vinfo->vram_start,
+			vinfo->vram_contig_size);
 }
 
 static int vmlfb_sync(struct fb_info *info)
-- 
cgit v1.2.2


From c84deb9d615c02993ce0972a0b34585c7624822f Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 18 Apr 2013 07:50:44 +0300
Subject: fbdev/sgivwfb: use vm_iomap_memory()

Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/sgivwfb.c | 20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c
index 2331fadc272b..b2a8912f6435 100644
--- a/drivers/video/sgivwfb.c
+++ b/drivers/video/sgivwfb.c
@@ -705,23 +705,17 @@ static int sgivwfb_setcolreg(u_int regno, u_int red, u_int green,
 static int sgivwfb_mmap(struct fb_info *info,
 			struct vm_area_struct *vma)
 {
-	unsigned long size = vma->vm_end - vma->vm_start;
-	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+	int r;
 
-	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
-		return -EINVAL;
-	if (offset + size > sgivwfb_mem_size)
-		return -EINVAL;
-	offset += sgivwfb_mem_phys;
 	pgprot_val(vma->vm_page_prot) =
-	    pgprot_val(vma->vm_page_prot) | _PAGE_PCD;
-	vma->vm_flags |= VM_IO;
-	if (remap_pfn_range(vma, vma->vm_start, offset >> PAGE_SHIFT,
-						size, vma->vm_page_prot))
-		return -EAGAIN;
+		pgprot_val(vma->vm_page_prot) | _PAGE_PCD;
+
+	r = vm_iomap_memory(vma, sgivwfb_mem_phys, sgivwfb_mem_size);
+
 	printk(KERN_DEBUG "sgivwfb: mmap framebuffer P(%lx)->V(%lx)\n",
 	       offset, vma->vm_start);
-	return 0;
+
+	return r;
 }
 
 int __init sgivwfb_setup(char *options)
-- 
cgit v1.2.2


From 11bd5933abe033fb7a3a0d1f1bd2cb4b6df8143f Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 18 Apr 2013 07:52:42 +0300
Subject: fbdev/ps3fb: use vm_iomap_memory()

Use vm_iomap_memory() instead of [io_]remap_pfn_range().
vm_iomap_memory() gives us much simpler API to map memory to userspace,
and reduces possibilities for bugs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
---
 drivers/video/ps3fb.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c
index 920c27bf3947..d9f08c653d62 100644
--- a/drivers/video/ps3fb.c
+++ b/drivers/video/ps3fb.c
@@ -705,21 +705,15 @@ static int ps3fb_pan_display(struct fb_var_screeninfo *var,
 
 static int ps3fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
 {
-	unsigned long size, offset;
+	int r;
 
-	size = vma->vm_end - vma->vm_start;
-	offset = vma->vm_pgoff << PAGE_SHIFT;
-	if (offset + size > info->fix.smem_len)
-		return -EINVAL;
-
-	offset += info->fix.smem_start;
-	if (remap_pfn_range(vma, vma->vm_start, offset >> PAGE_SHIFT,
-			    size, vma->vm_page_prot))
-		return -EAGAIN;
+	r = vm_iomap_memory(vma, info->fix.smem_start, info->fix.smem_len);
 
 	dev_dbg(info->device, "ps3fb: mmap framebuffer P(%lx)->V(%lx)\n",
-		offset, vma->vm_start);
-	return 0;
+		info->fix.smem_start + vma->vm_pgoff << PAGE_SHIFT,
+		vma->vm_start);
+
+	return r;
 }
 
     /*
-- 
cgit v1.2.2


From 04f8afbec37f63fafce16e454a7848426aa36202 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 18 Apr 2013 08:39:47 +0300
Subject: fbdev: improve fb_mmap bounds checks

Improve fb_mmap bounds checks in gbefb, smscufx, udlfb and vfb drivers to
prevent possible uint overflows.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Steve Glendinning <steve.glendinning@smsc.com>
Cc: Bernie Thompson <bernie@plugable.com>
---
 drivers/video/gbefb.c   | 4 +++-
 drivers/video/smscufx.c | 6 +++++-
 drivers/video/udlfb.c   | 6 +++++-
 drivers/video/vfb.c     | 7 +++++--
 4 files changed, 18 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index bda5e3941510..ceab37020fff 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -1016,7 +1016,9 @@ static int gbefb_mmap(struct fb_info *info,
 	/* check range */
 	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
 		return -EINVAL;
-	if (offset + size > gbe_mem_size)
+	if (size > gbe_mem_size)
+		return -EINVAL;
+	if (offset > gbe_mem_size - size)
 		return -EINVAL;
 
 	/* remap using the fastest write-through mode on architecture */
diff --git a/drivers/video/smscufx.c b/drivers/video/smscufx.c
index 97bd6620c364..b2b33fc1ac3f 100644
--- a/drivers/video/smscufx.c
+++ b/drivers/video/smscufx.c
@@ -782,7 +782,11 @@ static int ufx_ops_mmap(struct fb_info *info, struct vm_area_struct *vma)
 	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
 	unsigned long page, pos;
 
-	if (offset + size > info->fix.smem_len)
+	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
+		return -EINVAL;
+	if (size > info->fix.smem_len)
+		return -EINVAL;
+	if (offset > info->fix.smem_len - size)
 		return -EINVAL;
 
 	pos = (unsigned long)info->fix.smem_start + offset;
diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c
index 86d449ea3169..ec03e726c940 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -324,7 +324,11 @@ static int dlfb_ops_mmap(struct fb_info *info, struct vm_area_struct *vma)
 	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
 	unsigned long page, pos;
 
-	if (offset + size > info->fix.smem_len)
+	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
+		return -EINVAL;
+	if (size > info->fix.smem_len)
+		return -EINVAL;
+	if (offset > info->fix.smem_len - size)
 		return -EINVAL;
 
 	pos = (unsigned long)info->fix.smem_start + offset;
diff --git a/drivers/video/vfb.c b/drivers/video/vfb.c
index 8bc1f9398945..ee5985efa15c 100644
--- a/drivers/video/vfb.c
+++ b/drivers/video/vfb.c
@@ -420,9 +420,12 @@ static int vfb_mmap(struct fb_info *info,
 	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
 	unsigned long page, pos;
 
-	if (offset + size > info->fix.smem_len) {
+	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
+		return -EINVAL;
+	if (size > info->fix.smem_len)
+		return -EINVAL;
+	if (offset > info->fix.smem_len - size)
 		return -EINVAL;
-	}
 
 	pos = (unsigned long)info->fix.smem_start + offset;
 
-- 
cgit v1.2.2


From 138f296e140f79cb955caba70690076fb14e6f6d Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 24 Apr 2013 08:35:20 +0300
Subject: fbdev: fix check for fb_mmap's mmio availability

Commit fc9bbca8f650e5f738af8806317c0a041a48ae4a (vm: convert fb_mmap to
vm_iomap_memory() helper) made fbmem.c use vm_iomap_memory, but also
accidentally removed the check for mmio's availability.

Add the check back.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/fbmem.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers')

diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 86291dcd964a..dcb669eb4532 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1398,6 +1398,11 @@ fb_mmap(struct file *file, struct vm_area_struct * vma)
 	len = info->fix.smem_len;
 	mmio_pgoff = PAGE_ALIGN((start & ~PAGE_MASK) + len) >> PAGE_SHIFT;
 	if (vma->vm_pgoff >= mmio_pgoff) {
+		if (info->var.accel_flags) {
+			mutex_unlock(&info->mm_lock);
+			return -EINVAL;
+		}
+
 		vma->vm_pgoff -= mmio_pgoff;
 		start = info->fix.mmio_start;
 		len = info->fix.mmio_len;
-- 
cgit v1.2.2