From 56a645cc1bc16ab33b33a3e0854a46c5d2c864f3 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 22 Feb 2006 11:45:02 -0800 Subject: [PATCH] sky2: use device iomem to access PCI config To avoid problems with PCI config access without ACPI (or busted ACPI tables), use the device's window into PCI config space. I know this probably will upset the purists, but I would rather have users than ACPI testers. It also generates less code. Signed-off-by: Stephen Hemminger --- drivers/net/sky2.c | 81 ++++++++++++++++++++++-------------------------------- drivers/net/sky2.h | 21 ++++++++++++++ 2 files changed, 54 insertions(+), 48 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index d913d3407e90..fbbc85532c2e 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -195,11 +195,11 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) pr_debug("sky2_set_power_state %d\n", state); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); - pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_PMC, &power_control); + power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_PMC); vaux = (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL) && (power_control & PCI_PM_CAP_PME_D3cold); - pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_CTRL, &power_control); + power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL); power_control |= PCI_PM_CTRL_PME_STATUS; power_control &= ~(PCI_PM_CTRL_STATE_MASK); @@ -223,7 +223,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) sky2_write8(hw, B2_Y2_CLK_GATE, 0); /* Turn off phy power saving */ - pci_read_config_dword(hw->pdev, PCI_DEV_REG1, ®1); + reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); /* looks like this XL is back asswards .. */ @@ -234,26 +234,26 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) } if (hw->chip_id == CHIP_ID_YUKON_EC_U) { - pci_write_config_dword(hw->pdev, PCI_DEV_REG3, 0); - pci_read_config_dword(hw->pdev, PCI_DEV_REG4, ®1); + sky2_pci_write32(hw, PCI_DEV_REG3, 0); + reg1 = sky2_pci_read32(hw, PCI_DEV_REG4); reg1 &= P_ASPM_CONTROL_MSK; - pci_write_config_dword(hw->pdev, PCI_DEV_REG4, reg1); - pci_write_config_dword(hw->pdev, PCI_DEV_REG5, 0); + sky2_pci_write32(hw, PCI_DEV_REG4, reg1); + sky2_pci_write32(hw, PCI_DEV_REG5, 0); } - pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1); + sky2_pci_write32(hw, PCI_DEV_REG1, reg1); break; case PCI_D3hot: case PCI_D3cold: /* Turn on phy power saving */ - pci_read_config_dword(hw->pdev, PCI_DEV_REG1, ®1); + reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); else reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); - pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1); + sky2_pci_write32(hw, PCI_DEV_REG1, reg1); if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) sky2_write8(hw, B2_Y2_CLK_GATE, 0); @@ -275,7 +275,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) ret = -1; } - pci_write_config_byte(hw->pdev, hw->pm_cap + PCI_PM_CTRL, power_control); + sky2_pci_write16(hw, hw->pm_cap + PCI_PM_CTRL, power_control); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); return ret; } @@ -2059,13 +2059,13 @@ static void sky2_hw_intr(struct sky2_hw *hw) if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) { u16 pci_err; - pci_read_config_word(hw->pdev, PCI_STATUS, &pci_err); + pci_err = sky2_pci_read16(hw, PCI_STATUS); if (net_ratelimit()) printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n", pci_name(hw->pdev), pci_err); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); - pci_write_config_word(hw->pdev, PCI_STATUS, + sky2_pci_write16(hw, PCI_STATUS, pci_err | PCI_STATUS_ERROR_BITS); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } @@ -2074,7 +2074,7 @@ static void sky2_hw_intr(struct sky2_hw *hw) /* PCI-Express uncorrectable Error occurred */ u32 pex_err; - pci_read_config_dword(hw->pdev, PEX_UNC_ERR_STAT, &pex_err); + pex_err = sky2_pci_read32(hw, PEX_UNC_ERR_STAT); if (net_ratelimit()) printk(KERN_ERR PFX "%s: pci express error (0x%x)\n", @@ -2082,7 +2082,7 @@ static void sky2_hw_intr(struct sky2_hw *hw) /* clear the interrupt */ sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); - pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT, + sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL); sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); @@ -2212,7 +2212,7 @@ static int sky2_reset(struct sky2_hw *hw) { u16 status; u8 t8, pmd_type; - int i, err; + int i; sky2_write8(hw, B0_CTST, CS_RST_CLR); @@ -2234,25 +2234,18 @@ static int sky2_reset(struct sky2_hw *hw) sky2_write8(hw, B0_CTST, CS_RST_CLR); /* clear PCI errors, if any */ - err = pci_read_config_word(hw->pdev, PCI_STATUS, &status); - if (err) - goto pci_err; + status = sky2_pci_read16(hw, PCI_STATUS); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); - err = pci_write_config_word(hw->pdev, PCI_STATUS, - status | PCI_STATUS_ERROR_BITS); - if (err) - goto pci_err; + sky2_pci_write16(hw, PCI_STATUS, status | PCI_STATUS_ERROR_BITS); + sky2_write8(hw, B0_CTST, CS_MRST_CLR); /* clear any PEX errors */ - if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) { - err = pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT, - 0xffffffffUL); - if (err) - goto pci_err; - } + if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) + sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL); + pmd_type = sky2_read8(hw, B2_PMD_TYP); hw->copper = !(pmd_type == 'L' || pmd_type == 'S'); @@ -2362,14 +2355,6 @@ static int sky2_reset(struct sky2_hw *hw) sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START); return 0; - -pci_err: - /* This is to catch a BIOS bug workaround where - * mmconfig table doesn't have other buses. - */ - printk(KERN_ERR PFX "%s: can't access PCI config space\n", - pci_name(hw->pdev)); - return err; } static u32 sky2_supported_modes(const struct sky2_hw *hw) @@ -3239,17 +3224,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev, } } -#ifdef __BIG_ENDIAN - /* byte swap descriptors in hardware */ - { - u32 reg; - - pci_read_config_dword(pdev, PCI_DEV_REG2, ®); - reg |= PCI_REV_DESC; - pci_write_config_dword(pdev, PCI_DEV_REG2, reg); - } -#endif - err = -ENOMEM; hw = kzalloc(sizeof(*hw), GFP_KERNEL); if (!hw) { @@ -3268,6 +3242,17 @@ static int __devinit sky2_probe(struct pci_dev *pdev, } hw->pm_cap = pm_cap; +#ifdef __BIG_ENDIAN + /* byte swap descriptors in hardware */ + { + u32 reg; + + reg = sky2_pci_read32(hw, PCI_DEV_REG2); + reg |= PCI_REV_DESC; + sky2_pci_write32(hw, PCI_DEV_REG2, reg); + } +#endif + /* ring for status responses */ hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES, &hw->st_dma); diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index d1c71f50d8b9..9e40766150b4 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1951,4 +1951,25 @@ static inline void gma_set_addr(struct sky2_hw *hw, unsigned port, unsigned reg, gma_write16(hw, port, reg+4,(u16) addr[2] | ((u16) addr[3] << 8)); gma_write16(hw, port, reg+8,(u16) addr[4] | ((u16) addr[5] << 8)); } + +/* PCI config space access */ +static inline u32 sky2_pci_read32(const struct sky2_hw *hw, unsigned reg) +{ + return sky2_read32(hw, Y2_CFG_SPC + reg); +} + +static inline u16 sky2_pci_read16(const struct sky2_hw *hw, unsigned reg) +{ + return sky2_read16(hw, Y2_CFG_SPC + reg); +} + +static inline void sky2_pci_write32(struct sky2_hw *hw, unsigned reg, u32 val) +{ + sky2_write32(hw, Y2_CFG_SPC + reg, val); +} + +static inline void sky2_pci_write16(struct sky2_hw *hw, unsigned reg, u16 val) +{ + sky2_write16(hw, Y2_CFG_SPC + reg, val); +} #endif -- cgit v1.2.2