From 84e0f3f6c1e26588fdcb9f1b0f99d0275229bc99 Mon Sep 17 00:00:00 2001 From: Dimitri Gorokhovik Date: Wed, 16 Jul 2008 20:33:34 +0200 Subject: ide: it821x in pass-through mode segfaults in 2.6.26-stable The driver of ITE8212 in pass-through mode (it8212.noraid=1 on cmndline) attempts to use the field `.dma_host_set' of the struct ide_dma_ops in `ide_config_drive_speed' which is set to NULL by default. So give a value to all fields of the struct ide_dma_ops. Signed-off-by: Dimitri Gorokhovik Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/it821x.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index 6ab04115286b..cbf647202994 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -512,8 +512,14 @@ static void __devinit it821x_quirkproc(ide_drive_t *drive) } static struct ide_dma_ops it821x_pass_through_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = it821x_dma_start, .dma_end = it821x_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_timeout = ide_dma_timeout, + .dma_lost_irq = ide_dma_lost_irq, }; /** -- cgit v1.2.2 From 0b6abc17700a7843b165c677da0ac94522f83083 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Wed, 16 Jul 2008 20:33:35 +0200 Subject: ide: avoid DMA on the stack for REQ_TYPE_ATA_PC Some REQ_TYPE_ATA_PC commands uses the stack buffers for DMA, which leads to memory corruption on a non-coherent platform. With regard to alignment and padding, ide-cd has the the dma safe check for sg requests and REQ_TYPE_ATA_PC. This adds the stack buffer check to that check. Signed-off-by: FUJITA Tomonori Acked-by: Borislav Petkov Cc: Thomas Bogendoerfer Cc: Tejun Heo Cc: Jens Axboe Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index d99847157186..d6667c36568c 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1195,6 +1195,7 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) int mask = drive->queue->dma_alignment; unsigned long addr = (unsigned long)page_address(bio_page(rq->bio)); + unsigned long stack_mask = ~(THREAD_SIZE - 1); info->dma = drive->using_dma; @@ -1206,6 +1207,10 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) */ if ((rq->data_len & 15) || (addr & mask)) info->dma = 0; + + if (!((addr & stack_mask) ^ + ((unsigned long)current->stack & stack_mask))) + info->dma = 0; } /* start sending the command to the drive */ -- cgit v1.2.2 From e5318b531b008c79d2a0c0df06a7b8628da38e2f Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Wed, 16 Jul 2008 20:33:35 +0200 Subject: ide: use the dma safe check for REQ_TYPE_ATA_PC This uses the dma safe check for REQ_TYPE_ATA_PC. The dma safe check is used for only sg requests but it should be used for other non fs commands. This uses blk_queue_update_dma_pad to make the intention clear though ide don't use the blk APIs so it doesn't change anything. Signed-off-by: FUJITA Tomonori Acked-by: Borislav Petkov Cc: Thomas Bogendoerfer Cc: Tejun Heo Cc: Jens Axboe Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index d6667c36568c..e12d60278210 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1191,12 +1191,17 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) info->dma = 0; /* sg request */ - if (rq->bio) { - int mask = drive->queue->dma_alignment; - unsigned long addr = - (unsigned long)page_address(bio_page(rq->bio)); + if (rq->bio || ((rq->cmd_type == REQ_TYPE_ATA_PC) && rq->data_len)) { + struct request_queue *q = drive->queue; + unsigned int alignment; + unsigned long addr; unsigned long stack_mask = ~(THREAD_SIZE - 1); + if (rq->bio) + addr = (unsigned long)bio_data(rq->bio); + else + addr = (unsigned long)rq->data; + info->dma = drive->using_dma; /* @@ -1205,7 +1210,8 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) * NOTE! The "len" and "addr" checks should possibly have * separate masks. */ - if ((rq->data_len & 15) || (addr & mask)) + alignment = queue_dma_alignment(q) | q->dma_pad_mask; + if (addr & alignment || rq->data_len & alignment) info->dma = 0; if (!((addr & stack_mask) ^ @@ -1877,6 +1883,7 @@ static int ide_cdrom_setup(ide_drive_t *drive) blk_queue_prep_rq(drive->queue, ide_cdrom_prep_fn); blk_queue_dma_alignment(drive->queue, 31); + blk_queue_update_dma_pad(drive->queue, 15); drive->queue->unplug_delay = (1 * HZ) / 1000; if (!drive->queue->unplug_delay) drive->queue->unplug_delay = 1; -- cgit v1.2.2 From 96b1dfe8fe02e35f017c885b11f0beb10ff4f316 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 20 Jun 2008 20:53:35 +0200 Subject: BAST: Remove old IDE driver Remove the old BAST IDE driver, as we are now using the platform-pata support. Signed-off-by: Ben Dooks Cc: Jeff Garzik Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 7 ---- drivers/ide/arm/Makefile | 1 - drivers/ide/arm/bast-ide.c | 90 ---------------------------------------------- 3 files changed, 98 deletions(-) delete mode 100644 drivers/ide/arm/bast-ide.c (limited to 'drivers') diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index cf707c8f08d4..cd08dba8261b 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -829,13 +829,6 @@ config BLK_DEV_IDE_RAPIDE Say Y here if you want to support the Yellowstone RapIDE controller manufactured for use with Acorn computers. -config BLK_DEV_IDE_BAST - tristate "Simtec BAST / Thorcom VR1000 IDE support" - depends on ARM && (ARCH_BAST || MACH_VR1000) - help - Say Y here if you want to support the onboard IDE channels on the - Simtec BAST or the Thorcom VR1000 - config IDE_H8300 tristate "H8300 IDE support" depends on H8300 diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile index 936e7b0237f5..5bc26053afa6 100644 --- a/drivers/ide/arm/Makefile +++ b/drivers/ide/arm/Makefile @@ -1,7 +1,6 @@ obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o -obj-$(CONFIG_BLK_DEV_IDE_BAST) += bast-ide.o obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710) += palm_bk3710.o ifeq ($(CONFIG_IDE_ARM), m) diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c deleted file mode 100644 index 8e8c28104b45..000000000000 --- a/drivers/ide/arm/bast-ide.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include -#include -#include -#include - -#include - -#include -#include -#include -#include -#include - -#define DRV_NAME "bast-ide" - -static int __init bastide_register(unsigned int base, unsigned int aux, int irq) -{ - ide_hwif_t *hwif; - hw_regs_t hw; - int i; - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; - - memset(&hw, 0, sizeof(hw)); - - base += BAST_IDE_CS; - aux += BAST_IDE_CS; - - for (i = 0; i <= 7; i++) { - hw.io_ports_array[i] = (unsigned long)base; - base += 0x20; - } - - hw.io_ports.ctl_addr = aux + (6 * 0x20); - hw.irq = irq; - hw.chipset = ide_generic; - - hwif = ide_find_port(); - if (hwif == NULL) - goto out; - - i = hwif->index; - - ide_init_port_data(hwif, i); - ide_init_port_hw(hwif, &hw); - hwif->port_ops = NULL; - - idx[0] = i; - - ide_device_add(idx, NULL); -out: - return 0; -} - -static int __init bastide_init(void) -{ - unsigned long base = BAST_VA_IDEPRI + BAST_IDE_CS; - - /* we can treat the VR1000 and the BAST the same */ - - if (!(machine_is_bast() || machine_is_vr1000())) - return 0; - - printk("BAST: IDE driver, (c) 2003-2004 Simtec Electronics\n"); - - if (!request_mem_region(base, 0x400000, DRV_NAME)) { - printk(KERN_ERR "%s: resources busy\n", DRV_NAME); - return -EBUSY; - } - - bastide_register(BAST_VA_IDEPRI, BAST_VA_IDEPRIAUX, IRQ_IDE0); - bastide_register(BAST_VA_IDESEC, BAST_VA_IDESECAUX, IRQ_IDE1); - - return 0; -} - -module_init(bastide_init); - -MODULE_AUTHOR("Ben Dooks "); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Simtec BAST / Thorcom VR1000 IDE driver"); -- cgit v1.2.2 From e4e8d02f56f5c0cefc6713384629e068193d706a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:35 +0200 Subject: ide: remove needless includes from ide-lib.c Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-lib.c | 15 --------------- 1 file changed, 15 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 47af80df6872..7e053d217732 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -1,26 +1,11 @@ -#include #include #include #include -#include -#include #include -#include -#include -#include -#include -#include -#include -#include #include #include #include -#include -#include -#include -#include - static const char *udma_str[] = { "UDMA/16", "UDMA/25", "UDMA/33", "UDMA/44", "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" }; -- cgit v1.2.2 From f0ffc9872e972e9d9fe8f7ae577ff046dbdba51b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:36 +0200 Subject: ide: remove unused XFER_UDMA_SLOW Remove unused XFER_UDMA_SLOW from ide_timing[]. While at it: - fix re-defining XFER_PIO_5 (no need to define it in ide-timing.h as it is defined in which is included by ) - fix whitespace damage There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-timing.h | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h index 2e91c5870b4c..a20c4cbbfcdb 100644 --- a/drivers/ide/ide-timing.h +++ b/drivers/ide/ide-timing.h @@ -28,9 +28,6 @@ #include #include -#define XFER_PIO_5 0x0d -#define XFER_UDMA_SLOW 0x4f - struct ide_timing { short mode; short setup; /* t1 */ @@ -61,12 +58,10 @@ static struct ide_timing ide_timing[] = { { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, - { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, - { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, - + { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, -- cgit v1.2.2 From 71d5161426c26742ba053fe93637559cbe2cea37 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:36 +0200 Subject: ide: use u8 for xfer modes in ide-timing.h There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-timing.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h index a20c4cbbfcdb..ebe884d76881 100644 --- a/drivers/ide/ide-timing.h +++ b/drivers/ide/ide-timing.h @@ -29,7 +29,7 @@ #include struct ide_timing { - short mode; + u8 mode; short setup; /* t1 */ short act8b; /* t2 for 8-bit io */ short rec8b; /* t2i for 8-bit io */ @@ -76,7 +76,7 @@ static struct ide_timing ide_timing[] = { { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, - { -1 } + { 0xff } }; #define IDE_TIMING_SETUP 0x01 @@ -122,17 +122,18 @@ static void ide_timing_merge(struct ide_timing *a, struct ide_timing *b, struct if (what & IDE_TIMING_UDMA ) m->udma = max(a->udma, b->udma); } -static struct ide_timing* ide_timing_find_mode(short speed) +static struct ide_timing *ide_timing_find_mode(u8 speed) { struct ide_timing *t; for (t = ide_timing; t->mode != speed; t++) - if (t->mode < 0) + if (t->mode == 0xff) return NULL; return t; } -static int ide_timing_compute(ide_drive_t *drive, short speed, struct ide_timing *t, int T, int UT) +static int ide_timing_compute(ide_drive_t *drive, u8 speed, + struct ide_timing *t, int T, int UT) { struct hd_driveid *id = drive->id; struct ide_timing *s, p; -- cgit v1.2.2 From 3be53f3f213223f50d8e29b5e1869685bf040a1e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:36 +0200 Subject: ide: move some bits from ide-timing.h to Move struct ide_timing and IDE_TIMING_* defines to from drivers/ide/ide-timing.h. While at it: - use u8/u16 instead of short for struct ide_timing fields - use enum for IDE_TIMING_* There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-timing.h | 23 ----------------------- 1 file changed, 23 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h index ebe884d76881..724879910ac8 100644 --- a/drivers/ide/ide-timing.h +++ b/drivers/ide/ide-timing.h @@ -28,18 +28,6 @@ #include #include -struct ide_timing { - u8 mode; - short setup; /* t1 */ - short act8b; /* t2 for 8-bit io */ - short rec8b; /* t2i for 8-bit io */ - short cyc8b; /* t0 for 8-bit io */ - short active; /* t2 or tD */ - short recover; /* t2i or tK */ - short cycle; /* t0 */ - short udma; /* t2CYCTYP/2 */ -}; - /* * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). * These were taken from ATA/ATAPI-6 standard, rev 0a, except @@ -79,17 +67,6 @@ static struct ide_timing ide_timing[] = { { 0xff } }; -#define IDE_TIMING_SETUP 0x01 -#define IDE_TIMING_ACT8B 0x02 -#define IDE_TIMING_REC8B 0x04 -#define IDE_TIMING_CYC8B 0x08 -#define IDE_TIMING_8BIT 0x0e -#define IDE_TIMING_ACTIVE 0x10 -#define IDE_TIMING_RECOVER 0x20 -#define IDE_TIMING_CYCLE 0x40 -#define IDE_TIMING_UDMA 0x80 -#define IDE_TIMING_ALL 0xff - #define ENOUGH(v,unit) (((v)-1)/(unit)+1) #define EZ(v,unit) ((v)?ENOUGH(v,unit):0) -- cgit v1.2.2 From bd887f72d2a28a8202519e67fd9ed93ee3c4e78d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:36 +0200 Subject: ide: remove XFER_* masks from ide-timing.h * Check requested xfer mode against xfer modes instead of XFER_* masks in ide_timing_compute() and cs5535.c::cs5535_set_speed(). * Remove XFER_[MODE,MWDMA,EPIO,PIO] masks. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-timing.h | 24 +++++++----------------- drivers/ide/pci/cs5535.c | 4 +--- 2 files changed, 8 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h index 724879910ac8..a401d8f82b50 100644 --- a/drivers/ide/ide-timing.h +++ b/drivers/ide/ide-timing.h @@ -70,11 +70,6 @@ static struct ide_timing ide_timing[] = { #define ENOUGH(v,unit) (((v)-1)/(unit)+1) #define EZ(v,unit) ((v)?ENOUGH(v,unit):0) -#define XFER_MODE 0xf0 -#define XFER_MWDMA 0x20 -#define XFER_EPIO 0x01 -#define XFER_PIO 0x00 - static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, int T, int UT) { q->setup = EZ(t->setup * 1000, T); @@ -137,17 +132,12 @@ static int ide_timing_compute(ide_drive_t *drive, u8 speed, memset(&p, 0, sizeof(p)); - switch (speed & XFER_MODE) { - - case XFER_PIO: - if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = id->eide_pio; - else p.cycle = p.cyc8b = id->eide_pio_iordy; - break; - - case XFER_MWDMA: - p.cycle = id->eide_dma_min; - break; - } + if (speed <= XFER_PIO_2) + p.cycle = p.cyc8b = id->eide_pio; + else if (speed <= XFER_PIO_5) + p.cycle = p.cyc8b = id->eide_pio_iordy; + else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) + p.cycle = id->eide_dma_min; ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B); } @@ -164,7 +154,7 @@ static int ide_timing_compute(ide_drive_t *drive, u8 speed, * slower/equal than the fastest PIO timing. */ - if ((speed & XFER_MODE) != XFER_PIO) { + if (speed >= XFER_SW_DMA_0) { u8 pio = ide_get_best_pio_mode(drive, 255, 5); ide_timing_compute(drive, XFER_PIO_0 + pio, &p, T, UT); ide_timing_merge(&p, t, t, IDE_TIMING_ALL); diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c index 99fe91a191b8..2a2cb4911905 100644 --- a/drivers/ide/pci/cs5535.c +++ b/drivers/ide/pci/cs5535.c @@ -75,13 +75,11 @@ static unsigned int cs5535_udma_timings[5] = */ static void cs5535_set_speed(ide_drive_t *drive, const u8 speed) { - u32 reg = 0, dummy; int unit = drive->select.b.unit; - /* Set the PIO timings */ - if ((speed & XFER_MODE) == XFER_PIO) { + if (speed < XFER_SW_DMA_0) { ide_drive_t *pair = ide_get_paired_drive(drive); u8 cmd, pioa; -- cgit v1.2.2 From 2c139e7a7152f66ff93b173f8770c94ea53a691e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:36 +0200 Subject: ide: checkpatch.pl fixes for ide-timing.h Also fix placement of comments in ide_timing_compute() while at it. There should be no functional changes caused by this patch (md5sum was verified to be the same before/after the patch). Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-timing.h | 93 +++++++++++++++++++++++++----------------------- 1 file changed, 48 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h index a401d8f82b50..98e05f545450 100644 --- a/drivers/ide/ide-timing.h +++ b/drivers/ide/ide-timing.h @@ -3,9 +3,7 @@ /* * Copyright (c) 1999-2001 Vojtech Pavlik - */ - -/* + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -32,7 +30,7 @@ * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). * These were taken from ATA/ATAPI-6 standard, rev 0a, except * for PIO 5, which is a nonstandard extension and UDMA6, which - * is currently supported only by Maxtor drives. + * is currently supported only by Maxtor drives. */ static struct ide_timing ide_timing[] = { @@ -67,10 +65,11 @@ static struct ide_timing ide_timing[] = { { 0xff } }; -#define ENOUGH(v,unit) (((v)-1)/(unit)+1) -#define EZ(v,unit) ((v)?ENOUGH(v,unit):0) +#define ENOUGH(v, unit) (((v) - 1) / (unit) + 1) +#define EZ(v, unit) ((v) ? ENOUGH(v, unit) : 0) -static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, int T, int UT) +static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, + int T, int UT) { q->setup = EZ(t->setup * 1000, T); q->act8b = EZ(t->act8b * 1000, T); @@ -82,16 +81,25 @@ static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, int q->udma = EZ(t->udma * 1000, UT); } -static void ide_timing_merge(struct ide_timing *a, struct ide_timing *b, struct ide_timing *m, unsigned int what) +static void ide_timing_merge(struct ide_timing *a, struct ide_timing *b, + struct ide_timing *m, unsigned int what) { - if (what & IDE_TIMING_SETUP ) m->setup = max(a->setup, b->setup); - if (what & IDE_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b); - if (what & IDE_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b); - if (what & IDE_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b); - if (what & IDE_TIMING_ACTIVE ) m->active = max(a->active, b->active); - if (what & IDE_TIMING_RECOVER) m->recover = max(a->recover, b->recover); - if (what & IDE_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle); - if (what & IDE_TIMING_UDMA ) m->udma = max(a->udma, b->udma); + if (what & IDE_TIMING_SETUP) + m->setup = max(a->setup, b->setup); + if (what & IDE_TIMING_ACT8B) + m->act8b = max(a->act8b, b->act8b); + if (what & IDE_TIMING_REC8B) + m->rec8b = max(a->rec8b, b->rec8b); + if (what & IDE_TIMING_CYC8B) + m->cyc8b = max(a->cyc8b, b->cyc8b); + if (what & IDE_TIMING_ACTIVE) + m->active = max(a->active, b->active); + if (what & IDE_TIMING_RECOVER) + m->recover = max(a->recover, b->recover); + if (what & IDE_TIMING_CYCLE) + m->cycle = max(a->cycle, b->cycle); + if (what & IDE_TIMING_UDMA) + m->udma = max(a->udma, b->udma); } static struct ide_timing *ide_timing_find_mode(u8 speed) @@ -101,7 +109,7 @@ static struct ide_timing *ide_timing_find_mode(u8 speed) for (t = ide_timing; t->mode != speed; t++) if (t->mode == 0xff) return NULL; - return t; + return t; } static int ide_timing_compute(ide_drive_t *drive, u8 speed, @@ -110,24 +118,22 @@ static int ide_timing_compute(ide_drive_t *drive, u8 speed, struct hd_driveid *id = drive->id; struct ide_timing *s, p; -/* - * Find the mode. - */ - - if (!(s = ide_timing_find_mode(speed))) + /* + * Find the mode. + */ + s = ide_timing_find_mode(speed); + if (s == NULL) return -EINVAL; -/* - * Copy the timing from the table. - */ - + /* + * Copy the timing from the table. + */ *t = *s; -/* - * If the drive is an EIDE drive, it can tell us it needs extended - * PIO/MWDMA cycle timing. - */ - + /* + * If the drive is an EIDE drive, it can tell us it needs extended + * PIO/MWDMA cycle timing. + */ if (id && id->field_valid & 2) { /* EIDE drive */ memset(&p, 0, sizeof(p)); @@ -142,28 +148,25 @@ static int ide_timing_compute(ide_drive_t *drive, u8 speed, ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B); } -/* - * Convert the timing to bus clock counts. - */ - + /* + * Convert the timing to bus clock counts. + */ ide_timing_quantize(t, t, T, UT); -/* - * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T - * and some other commands. We have to ensure that the DMA cycle timing is - * slower/equal than the fastest PIO timing. - */ - + /* + * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, + * S.M.A.R.T and some other commands. We have to ensure that the + * DMA cycle timing is slower/equal than the fastest PIO timing. + */ if (speed >= XFER_SW_DMA_0) { u8 pio = ide_get_best_pio_mode(drive, 255, 5); ide_timing_compute(drive, XFER_PIO_0 + pio, &p, T, UT); ide_timing_merge(&p, t, t, IDE_TIMING_ALL); } -/* - * Lengthen active & recovery time so that cycle time is correct. - */ - + /* + * Lengthen active & recovery time so that cycle time is correct. + */ if (t->act8b + t->rec8b < t->cyc8b) { t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; t->rec8b = t->cyc8b - t->act8b; -- cgit v1.2.2 From f06ab3402aa2d6de060442c1053ea10b24b65076 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:37 +0200 Subject: ide: convert ide-timing.h to ide-timings.c library (take 2) * Don't include ide-timing.h in cs5535 and sis5513 host drivers (they don't need it currently). * Convert ide-timing.h to ide-timings.c library and add CONFIG_IDE_TIMINGS config option to be selected by host drivers using the library. While at it: - fix ide_timing_find_mode() placement v2: * Add missing EXPORT_SYMBOLs. (Stephen Rothwell ) There should be no functional changes caused by this patch. Cc: Stephen Rothwell Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 7 ++ drivers/ide/Makefile | 1 + drivers/ide/arm/palm_bk3710.c | 2 - drivers/ide/ide-timing.h | 183 ------------------------------------------ drivers/ide/ide-timings.c | 183 ++++++++++++++++++++++++++++++++++++++++++ drivers/ide/pci/amd74xx.c | 2 - drivers/ide/pci/cs5535.c | 2 - drivers/ide/pci/sis5513.c | 3 - drivers/ide/pci/via82cxxx.c | 2 - drivers/ide/ppc/pmac.c | 2 - 10 files changed, 191 insertions(+), 196 deletions(-) delete mode 100644 drivers/ide/ide-timing.h create mode 100644 drivers/ide/ide-timings.c (limited to 'drivers') diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index cd08dba8261b..994b6d39b559 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -98,6 +98,9 @@ if BLK_DEV_IDE comment "Please see Documentation/ide/ide.txt for help/info on IDE drives" +config IDE_TIMINGS + bool + config IDE_ATAPI bool @@ -469,6 +472,7 @@ config BLK_DEV_ALI15X3 config BLK_DEV_AMD74XX tristate "AMD and nVidia IDE support" depends on !ARM + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help This driver adds explicit support for AMD-7xx and AMD-8111 chips @@ -725,6 +729,7 @@ config BLK_DEV_TRM290 config BLK_DEV_VIA82CXXX tristate "VIA82CXXX chipset support" + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help This driver adds explicit support for VIA BusMastering IDE chips. @@ -751,6 +756,7 @@ endif config BLK_DEV_IDE_PMAC tristate "PowerMac on-board IDE support" depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y + select IDE_TIMINGS help This driver provides support for the on-board IDE controller on most of the recent Apple Power Macintoshes and PowerBooks. @@ -912,6 +918,7 @@ config BLK_DEV_Q40IDE config BLK_DEV_PALMCHIP_BK3710 tristate "Palmchip bk3710 IDE controller support" depends on ARCH_DAVINCI + select IDE_TIMINGS select BLK_DEV_IDEDMA_SFF help Say Y here if you want to support the onchip IDE controller on the diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index a2b3f84d710d..cb1350684c9a 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -14,6 +14,7 @@ EXTRA_CFLAGS += -Idrivers/ide ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o # core IDE code +ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o ide-core-$(CONFIG_IDE_ATAPI) += ide-atapi.o ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index 3839f5722985..9b8a45d2cf17 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -74,8 +74,6 @@ struct palm_bk3710_udmatiming { #define BK3710_IORDYTMP 0x78 #define BK3710_IORDYTMS 0x7C -#include "../ide-timing.h" - static unsigned ideclk_period; /* in nanoseconds */ static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = { diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h deleted file mode 100644 index 98e05f545450..000000000000 --- a/drivers/ide/ide-timing.h +++ /dev/null @@ -1,183 +0,0 @@ -#ifndef _IDE_TIMING_H -#define _IDE_TIMING_H - -/* - * Copyright (c) 1999-2001 Vojtech Pavlik - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Should you need to contact me, the author, you can do so either by - * e-mail - mail your message to , or by paper mail: - * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic - */ - -#include -#include - -/* - * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). - * These were taken from ATA/ATAPI-6 standard, rev 0a, except - * for PIO 5, which is a nonstandard extension and UDMA6, which - * is currently supported only by Maxtor drives. - */ - -static struct ide_timing ide_timing[] = { - - { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, - { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, - { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, - { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, - - { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, - { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, - { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, - - { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, - { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, - { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, - - { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, - { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, - { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, - - { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, - { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, - { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, - - { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, - { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, - { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, - - { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, - - { 0xff } -}; - -#define ENOUGH(v, unit) (((v) - 1) / (unit) + 1) -#define EZ(v, unit) ((v) ? ENOUGH(v, unit) : 0) - -static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, - int T, int UT) -{ - q->setup = EZ(t->setup * 1000, T); - q->act8b = EZ(t->act8b * 1000, T); - q->rec8b = EZ(t->rec8b * 1000, T); - q->cyc8b = EZ(t->cyc8b * 1000, T); - q->active = EZ(t->active * 1000, T); - q->recover = EZ(t->recover * 1000, T); - q->cycle = EZ(t->cycle * 1000, T); - q->udma = EZ(t->udma * 1000, UT); -} - -static void ide_timing_merge(struct ide_timing *a, struct ide_timing *b, - struct ide_timing *m, unsigned int what) -{ - if (what & IDE_TIMING_SETUP) - m->setup = max(a->setup, b->setup); - if (what & IDE_TIMING_ACT8B) - m->act8b = max(a->act8b, b->act8b); - if (what & IDE_TIMING_REC8B) - m->rec8b = max(a->rec8b, b->rec8b); - if (what & IDE_TIMING_CYC8B) - m->cyc8b = max(a->cyc8b, b->cyc8b); - if (what & IDE_TIMING_ACTIVE) - m->active = max(a->active, b->active); - if (what & IDE_TIMING_RECOVER) - m->recover = max(a->recover, b->recover); - if (what & IDE_TIMING_CYCLE) - m->cycle = max(a->cycle, b->cycle); - if (what & IDE_TIMING_UDMA) - m->udma = max(a->udma, b->udma); -} - -static struct ide_timing *ide_timing_find_mode(u8 speed) -{ - struct ide_timing *t; - - for (t = ide_timing; t->mode != speed; t++) - if (t->mode == 0xff) - return NULL; - return t; -} - -static int ide_timing_compute(ide_drive_t *drive, u8 speed, - struct ide_timing *t, int T, int UT) -{ - struct hd_driveid *id = drive->id; - struct ide_timing *s, p; - - /* - * Find the mode. - */ - s = ide_timing_find_mode(speed); - if (s == NULL) - return -EINVAL; - - /* - * Copy the timing from the table. - */ - *t = *s; - - /* - * If the drive is an EIDE drive, it can tell us it needs extended - * PIO/MWDMA cycle timing. - */ - if (id && id->field_valid & 2) { /* EIDE drive */ - - memset(&p, 0, sizeof(p)); - - if (speed <= XFER_PIO_2) - p.cycle = p.cyc8b = id->eide_pio; - else if (speed <= XFER_PIO_5) - p.cycle = p.cyc8b = id->eide_pio_iordy; - else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) - p.cycle = id->eide_dma_min; - - ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B); - } - - /* - * Convert the timing to bus clock counts. - */ - ide_timing_quantize(t, t, T, UT); - - /* - * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, - * S.M.A.R.T and some other commands. We have to ensure that the - * DMA cycle timing is slower/equal than the fastest PIO timing. - */ - if (speed >= XFER_SW_DMA_0) { - u8 pio = ide_get_best_pio_mode(drive, 255, 5); - ide_timing_compute(drive, XFER_PIO_0 + pio, &p, T, UT); - ide_timing_merge(&p, t, t, IDE_TIMING_ALL); - } - - /* - * Lengthen active & recovery time so that cycle time is correct. - */ - if (t->act8b + t->rec8b < t->cyc8b) { - t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; - t->rec8b = t->cyc8b - t->act8b; - } - - if (t->active + t->recover < t->cycle) { - t->active += (t->cycle - (t->active + t->recover)) / 2; - t->recover = t->cycle - t->active; - } - - return 0; -} - -#endif diff --git a/drivers/ide/ide-timings.c b/drivers/ide/ide-timings.c new file mode 100644 index 000000000000..ebef6d4e3f63 --- /dev/null +++ b/drivers/ide/ide-timings.c @@ -0,0 +1,183 @@ +/* + * Copyright (c) 1999-2001 Vojtech Pavlik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Should you need to contact me, the author, you can do so either by + * e-mail - mail your message to , or by paper mail: + * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic + */ + +#include +#include +#include +#include + +/* + * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). + * These were taken from ATA/ATAPI-6 standard, rev 0a, except + * for PIO 5, which is a nonstandard extension and UDMA6, which + * is currently supported only by Maxtor drives. + */ + +static struct ide_timing ide_timing[] = { + + { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, + { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, + { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, + { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, + + { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, + { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, + { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, + + { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, + { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, + { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, + + { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, + { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, + { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, + + { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, + { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, + { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, + + { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, + { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, + { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, + + { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, + + { 0xff } +}; + +struct ide_timing *ide_timing_find_mode(u8 speed) +{ + struct ide_timing *t; + + for (t = ide_timing; t->mode != speed; t++) + if (t->mode == 0xff) + return NULL; + return t; +} +EXPORT_SYMBOL_GPL(ide_timing_find_mode); + +#define ENOUGH(v, unit) (((v) - 1) / (unit) + 1) +#define EZ(v, unit) ((v) ? ENOUGH(v, unit) : 0) + +static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, + int T, int UT) +{ + q->setup = EZ(t->setup * 1000, T); + q->act8b = EZ(t->act8b * 1000, T); + q->rec8b = EZ(t->rec8b * 1000, T); + q->cyc8b = EZ(t->cyc8b * 1000, T); + q->active = EZ(t->active * 1000, T); + q->recover = EZ(t->recover * 1000, T); + q->cycle = EZ(t->cycle * 1000, T); + q->udma = EZ(t->udma * 1000, UT); +} + +void ide_timing_merge(struct ide_timing *a, struct ide_timing *b, + struct ide_timing *m, unsigned int what) +{ + if (what & IDE_TIMING_SETUP) + m->setup = max(a->setup, b->setup); + if (what & IDE_TIMING_ACT8B) + m->act8b = max(a->act8b, b->act8b); + if (what & IDE_TIMING_REC8B) + m->rec8b = max(a->rec8b, b->rec8b); + if (what & IDE_TIMING_CYC8B) + m->cyc8b = max(a->cyc8b, b->cyc8b); + if (what & IDE_TIMING_ACTIVE) + m->active = max(a->active, b->active); + if (what & IDE_TIMING_RECOVER) + m->recover = max(a->recover, b->recover); + if (what & IDE_TIMING_CYCLE) + m->cycle = max(a->cycle, b->cycle); + if (what & IDE_TIMING_UDMA) + m->udma = max(a->udma, b->udma); +} +EXPORT_SYMBOL_GPL(ide_timing_merge); + +int ide_timing_compute(ide_drive_t *drive, u8 speed, + struct ide_timing *t, int T, int UT) +{ + struct hd_driveid *id = drive->id; + struct ide_timing *s, p; + + /* + * Find the mode. + */ + s = ide_timing_find_mode(speed); + if (s == NULL) + return -EINVAL; + + /* + * Copy the timing from the table. + */ + *t = *s; + + /* + * If the drive is an EIDE drive, it can tell us it needs extended + * PIO/MWDMA cycle timing. + */ + if (id && id->field_valid & 2) { /* EIDE drive */ + + memset(&p, 0, sizeof(p)); + + if (speed <= XFER_PIO_2) + p.cycle = p.cyc8b = id->eide_pio; + else if (speed <= XFER_PIO_5) + p.cycle = p.cyc8b = id->eide_pio_iordy; + else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) + p.cycle = id->eide_dma_min; + + ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B); + } + + /* + * Convert the timing to bus clock counts. + */ + ide_timing_quantize(t, t, T, UT); + + /* + * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, + * S.M.A.R.T and some other commands. We have to ensure that the + * DMA cycle timing is slower/equal than the fastest PIO timing. + */ + if (speed >= XFER_SW_DMA_0) { + u8 pio = ide_get_best_pio_mode(drive, 255, 5); + ide_timing_compute(drive, XFER_PIO_0 + pio, &p, T, UT); + ide_timing_merge(&p, t, t, IDE_TIMING_ALL); + } + + /* + * Lengthen active & recovery time so that cycle time is correct. + */ + if (t->act8b + t->rec8b < t->cyc8b) { + t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; + t->rec8b = t->cyc8b - t->act8b; + } + + if (t->active + t->recover < t->cycle) { + t->active += (t->cycle - (t->active + t->recover)) / 2; + t->recover = t->cycle - t->active; + } + + return 0; +} +EXPORT_SYMBOL_GPL(ide_timing_compute); diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index ad222206a429..0bfcdd0e77b3 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -21,8 +21,6 @@ #include #include -#include "ide-timing.h" - enum { AMD_IDE_CONFIG = 0x41, AMD_CABLE_DETECT = 0x42, diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c index 2a2cb4911905..dc97c48623f3 100644 --- a/drivers/ide/pci/cs5535.c +++ b/drivers/ide/pci/cs5535.c @@ -26,8 +26,6 @@ #include #include -#include "ide-timing.h" - #define MSR_ATAC_BASE 0x51300000 #define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0) #define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01) diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index e127eb25ab63..2389945ca95d 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -52,8 +52,6 @@ #include #include -#include "ide-timing.h" - /* registers layout and init values are chipset family dependant */ #define ATA_16 0x01 @@ -616,7 +614,6 @@ MODULE_LICENSE("GPL"); /* * TODO: * - CLEANUP - * - Use drivers/ide/ide-timing.h ! * - More checks in the config registers (force values instead of * relying on the BIOS setting them correctly). * - Further optimisations ? diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index 3ed9728abd24..e47384c70c40 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -35,8 +35,6 @@ #include #endif -#include "ide-timing.h" - #define VIA_IDE_ENABLE 0x40 #define VIA_IDE_CONFIG 0x41 #define VIA_FIFO_CONFIG 0x43 diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index dcb2c466bb97..5b91d23269d3 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -48,8 +48,6 @@ #include #endif -#include "../ide-timing.h" - #undef IDE_PMAC_DEBUG #define DMA_WAIT_TIMEOUT 50 -- cgit v1.2.2 From cc57ccc03d2a9b5622300f4b59fc8b54408c6e24 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:37 +0200 Subject: ali14xx: convert to use ide_timing_find_mode() There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 1 + drivers/ide/legacy/ali14xx.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 994b6d39b559..e9afafd55cd0 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -981,6 +981,7 @@ config BLK_DEV_4DRIVES config BLK_DEV_ALI14XX tristate "ALI M14xx support" + select IDE_TIMINGS help This driver is enabled at runtime using the "ali14xx.probe" kernel boot parameter. It enables support for the secondary IDE interface diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c index 052125fafcfa..4ec19737f3c5 100644 --- a/drivers/ide/legacy/ali14xx.c +++ b/drivers/ide/legacy/ali14xx.c @@ -117,10 +117,11 @@ static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio) u8 param1, param2, param3, param4; unsigned long flags; int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50; + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); /* calculate timing, according to PIO mode */ time1 = ide_pio_cycle_time(drive, pio); - time2 = ide_pio_timings[pio].active_time; + time2 = t->active; param3 = param1 = (time2 * bus_speed + 999) / 1000; param4 = param2 = (time1 * bus_speed + 999) / 1000 - param1; if (pio < 3) { -- cgit v1.2.2 From b32b76f72df17de891181b47e714f9f897bb62a1 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:37 +0200 Subject: ht6560b: convert to use ide_timing_find_mode() There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 1 + drivers/ide/legacy/ht6560b.c | 7 +++---- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index e9afafd55cd0..615e0bc01844 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -1001,6 +1001,7 @@ config BLK_DEV_DTC2278 config BLK_DEV_HT6560B tristate "Holtek HT6560B support" + select IDE_TIMINGS help This driver is enabled at runtime using the "ht6560b.probe" kernel boot parameter. It enables support for the secondary IDE interface diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c index dd6dfb32e853..bd2f579946fa 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c @@ -216,6 +216,7 @@ static u8 ht_pio2timings(ide_drive_t *drive, const u8 pio) if (pio) { unsigned int cycle_time; + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); cycle_time = ide_pio_cycle_time(drive, pio); @@ -224,10 +225,8 @@ static u8 ht_pio2timings(ide_drive_t *drive, const u8 pio) * actual cycle time for recovery and activity * according system bus speed. */ - active_time = ide_pio_timings[pio].active_time; - recovery_time = cycle_time - - active_time - - ide_pio_timings[pio].setup_time; + active_time = t->active; + recovery_time = cycle_time - active_time - t->setup; /* * Cycle times should be Vesa bus cycles */ -- cgit v1.2.2 From 2feecface7fd62be75bd4961324dc279a04bef22 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:37 +0200 Subject: qd65xx: convert to use ide_timing_find_mode() There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 1 + drivers/ide/legacy/qd65xx.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 615e0bc01844..86db707ad6cc 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -1011,6 +1011,7 @@ config BLK_DEV_HT6560B config BLK_DEV_QD65XX tristate "QDI QD65xx support" + select IDE_TIMINGS help This driver is enabled at runtime using the "qd65xx.probe" kernel boot parameter. It permits faster I/O speeds to be set. See the diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c index 51dba82f8812..63f6c31d16ea 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c @@ -207,6 +207,7 @@ static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio) static void qd6580_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = drive->hwif; + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); unsigned int cycle_time; int active_time = 175; int recovery_time = 415; /* worst case values from the dos driver */ @@ -236,7 +237,7 @@ static void qd6580_set_pio_mode(ide_drive_t *drive, const u8 pio) active_time = 110; recovery_time = cycle_time - 120; } else { - active_time = ide_pio_timings[pio].active_time; + active_time = t->active; recovery_time = cycle_time - active_time; } } -- cgit v1.2.2 From 288911af1209f5aa6119c9ec6d5a9bdb16a385b5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:37 +0200 Subject: alim15x3: convert to use ide_timing_find_mode() There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 1 + drivers/ide/pci/alim15x3.c | 6 ++---- 2 files changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 86db707ad6cc..cadce92047fb 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -458,6 +458,7 @@ config BLK_DEV_AEC62XX config BLK_DEV_ALI15X3 tristate "ALI M15x3 chipset support" + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help This driver ensures (U)DMA support for ALI 1533, 1543 and 1543C diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index f2de00adf147..80d19c0eb780 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -69,7 +69,8 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); - int s_time, a_time, c_time; + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); + int s_time = t->setup, a_time = t->active, c_time = t->cycle; u8 s_clc, a_clc, r_clc; unsigned long flags; int bus_speed = ide_pci_clk ? ide_pci_clk : 33; @@ -78,13 +79,10 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) u8 cd_dma_fifo = 0; int unit = drive->select.b.unit & 1; - s_time = ide_pio_timings[pio].setup_time; - a_time = ide_pio_timings[pio].active_time; if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8) s_clc = 0; if ((a_clc = (a_time * bus_speed + 999) / 1000) >= 8) a_clc = 0; - c_time = ide_pio_timings[pio].cycle_time; if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) { r_clc = 1; -- cgit v1.2.2 From 17b500de0ad79a306a0cd8acfe9a9f086ad28b4c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:38 +0200 Subject: cmd640: convert to use ide_timing_find_mode() There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 1 + drivers/ide/pci/cmd640.c | 8 ++++++-- 2 files changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index cadce92047fb..e072bdea907a 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -329,6 +329,7 @@ config BLK_DEV_PLATFORM config BLK_DEV_CMD640 tristate "CMD640 chipset bugfix/support" depends on X86 + select IDE_TIMINGS ---help--- The CMD-Technologies CMD640 IDE chip is used on many common 486 and Pentium motherboards, usually in combination with a "Neptune" or diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index cd1ba14984ab..baa26a26709a 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -521,6 +521,7 @@ static void program_drive_counts(ide_drive_t *drive, unsigned int index) static void cmd640_set_mode(ide_drive_t *drive, unsigned int index, u8 pio_mode, unsigned int cycle_time) { + struct ide_timing *t; int setup_time, active_time, recovery_time, clock_time; u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count; int bus_speed; @@ -532,8 +533,11 @@ static void cmd640_set_mode(ide_drive_t *drive, unsigned int index, if (pio_mode > 5) pio_mode = 5; - setup_time = ide_pio_timings[pio_mode].setup_time; - active_time = ide_pio_timings[pio_mode].active_time; + + t = ide_timing_find_mode(XFER_PIO_0 + pio_mode); + setup_time = t->setup; + active_time = t->active; + recovery_time = cycle_time - (setup_time + active_time); clock_time = 1000 / bus_speed; cycle_count = DIV_ROUND_UP(cycle_time, clock_time); -- cgit v1.2.2 From 86a0e12fcb590a6a84b90ae00e6d6564ce770749 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:38 +0200 Subject: cmd64x: convert to use ide_timing_find_mode() There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 1 + drivers/ide/pci/cmd64x.c | 6 +++--- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index e072bdea907a..d5526d3af623 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -495,6 +495,7 @@ config BLK_DEV_ATIIXP config BLK_DEV_CMD64X tristate "CMD64{3|6|8|9} chipset support" + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help Say Y here if you have an IDE controller which uses any of these diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index ca4774aa27ee..cfa784bacf48 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -116,6 +116,7 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); unsigned int cycle_time; u8 setup_count, arttim = 0; @@ -124,10 +125,9 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) cycle_time = ide_pio_cycle_time(drive, pio); - program_cycle_times(drive, cycle_time, - ide_pio_timings[pio].active_time); + program_cycle_times(drive, cycle_time, t->active); - setup_count = quantize_timing(ide_pio_timings[pio].setup_time, + setup_count = quantize_timing(t->setup, 1000 / (ide_pci_clk ? ide_pci_clk : 33)); /* -- cgit v1.2.2 From 713a590dea9a61e84f2837e75c5e9429d95908b5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:38 +0200 Subject: cy82c693: convert to use ide_timing_find_mode() There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 1 + drivers/ide/pci/cy82c693.c | 9 ++++----- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index d5526d3af623..7446db649064 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -510,6 +510,7 @@ config BLK_DEV_TRIFLEX config BLK_DEV_CY82C693 tristate "CY82C693 chipset support" + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help This driver adds detection and support for the CY82C693 chipset diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c index 8c534afcb6c8..e14ad5530fa4 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/pci/cy82c693.c @@ -133,6 +133,7 @@ static int calc_clk(int time, int bus_speed) */ static void compute_clocks(u8 pio, pio_clocks_t *p_pclk) { + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); int clk1, clk2; int bus_speed = ide_pci_clk ? ide_pci_clk : 33; @@ -141,15 +142,13 @@ static void compute_clocks(u8 pio, pio_clocks_t *p_pclk) */ /* let's calc the address setup time clocks */ - p_pclk->address_time = (u8)calc_clk(ide_pio_timings[pio].setup_time, bus_speed); + p_pclk->address_time = (u8)calc_clk(t->setup, bus_speed); /* let's calc the active and recovery time clocks */ - clk1 = calc_clk(ide_pio_timings[pio].active_time, bus_speed); + clk1 = calc_clk(t->active, bus_speed); /* calc recovery timing */ - clk2 = ide_pio_timings[pio].cycle_time - - ide_pio_timings[pio].active_time - - ide_pio_timings[pio].setup_time; + clk2 = t->cycle - t->active - t->setup; clk2 = calc_clk(clk2, bus_speed); -- cgit v1.2.2 From 3f847571a1cf845a338bcd352f31240b3615f40d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:38 +0200 Subject: sl82c105: convert to use ide_timing_find_mode() There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 1 + drivers/ide/pci/sl82c105.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 7446db649064..5f4d6ea379f6 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -703,6 +703,7 @@ config BLK_DEV_SIS5513 config BLK_DEV_SL82C105 tristate "Winbond SL82c105 support" depends on (PPC || ARM) + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help If you have a Winbond SL82c105 IDE controller, say Y here to enable diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index ce84fa045d39..6efbde297174 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -47,10 +47,11 @@ */ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio) { + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); unsigned int cmd_on, cmd_off; u8 iordy = 0; - cmd_on = (ide_pio_timings[pio].active_time + 29) / 30; + cmd_on = (t->active + 29) / 30; cmd_off = (ide_pio_cycle_time(drive, pio) - 30 * cmd_on + 29) / 30; if (cmd_on == 0) -- cgit v1.2.2 From b96f7384646519da54ad50bfad8d53b915b70cb3 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:38 +0200 Subject: ide-mpc8xx: convert to use ide_timing_find_mode() Also fix (disabled) debugging code while at it. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ppc/mpc8xx.c | 33 +++++++++++++-------------------- 1 file changed, 13 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c index 236f9c38e519..33bc699814d7 100644 --- a/drivers/ide/ppc/mpc8xx.c +++ b/drivers/ide/ppc/mpc8xx.c @@ -89,7 +89,7 @@ ide_ioport_desc_t ioport_dsc[MAX_HWIFS] = { #endif /* IDE0_BASE_OFFSET */ }; -ide_pio_timings_t ide_pio_clocks[6]; +struct ide_timing ide_pio_clocks[6]; int hold_time[6] = {30, 20, 15, 10, 10, 10 }; /* PIO Mode 5 with IORDY (nonstandard) */ /* @@ -200,30 +200,23 @@ static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) /* Compute clock cycles for PIO timings */ for (i=0; i<6; ++i) { bd_t *binfo = (bd_t *)__res; + struct ide_timing *t, *n; hold_time[i] = PCMCIA_MK_CLKS (hold_time[i], binfo->bi_busfreq); - ide_pio_clocks[i].setup_time = - PCMCIA_MK_CLKS (ide_pio_timings[i].setup_time, - binfo->bi_busfreq); - ide_pio_clocks[i].active_time = - PCMCIA_MK_CLKS (ide_pio_timings[i].active_time, - binfo->bi_busfreq); - ide_pio_clocks[i].cycle_time = - PCMCIA_MK_CLKS (ide_pio_timings[i].cycle_time, - binfo->bi_busfreq); + + t = ide_timing_find_mode(XFER_PIO_0 + i); + n = &ide_pio_clocks[i]; + + n->setup = PCMCIA_MK_CLKS(t->setup, binfo->bi_busfreq); + n->active = PCMCIA_MK_CLKS(t->active, binfo->bi_busfreq); + n->cycle = PCMCIA_MK_CLKS(t->cycle, binfo->bi_busfreq); #if 0 printk ("PIO mode %d timings: %d/%d/%d => %d/%d/%d\n", i, - ide_pio_clocks[i].setup_time, - ide_pio_clocks[i].active_time, - ide_pio_clocks[i].hold_time, - ide_pio_clocks[i].cycle_time, - ide_pio_timings[i].setup_time, - ide_pio_timings[i].active_time, - ide_pio_timings[i].hold_time, - ide_pio_timings[i].cycle_time); + t->setup, t->active, t->cycle, + n->setup, n->active, n->cycle); #endif } } @@ -408,8 +401,8 @@ static void m8xx_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) mask = ~(PCMCIA_SHT(0xFF) | PCMCIA_SST(0xFF) | PCMCIA_SL(0xFF)); timing = PCMCIA_SHT(hold_time[pio] ) - | PCMCIA_SST(ide_pio_clocks[pio].setup_time ) - | PCMCIA_SL (ide_pio_clocks[pio].active_time) + | PCMCIA_SST(ide_pio_clocks[pio].setup) + | PCMCIA_SL (ide_pio_clocks[pio].active) ; #if 1 -- cgit v1.2.2 From 8a97206e31dc2e2f8f9b4d97e234b5c701fe9894 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:38 +0200 Subject: ide-pmac: convert to use ide_timing_find_mode() Also update my Copyrights while at it. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ppc/pmac.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 5b91d23269d3..cfa103a51b31 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -5,7 +5,7 @@ * for doing DMA. * * Copyright (C) 1998-2003 Paul Mackerras & Ben. Herrenschmidt - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz + * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -493,6 +493,7 @@ static void pmac_outbsync(ide_hwif_t *hwif, u8 value, unsigned long port) static void pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) { + struct ide_timing *tim = ide_timing_find_mode(XFER_PIO_0 + pio); u32 *timings, t; unsigned accessTicks, recTicks; unsigned accessTime, recTime; @@ -524,10 +525,9 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) } case controller_kl_ata4: /* 66Mhz cell */ - recTime = cycle_time - ide_pio_timings[pio].active_time - - ide_pio_timings[pio].setup_time; + recTime = cycle_time - tim->active - tim->setup; recTime = max(recTime, 150U); - accessTime = ide_pio_timings[pio].active_time; + accessTime = tim->active; accessTime = max(accessTime, 150U); accessTicks = SYSCLK_TICKS_66(accessTime); accessTicks = min(accessTicks, 0x1fU); @@ -540,10 +540,9 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) default: { /* 33Mhz cell */ int ebit = 0; - recTime = cycle_time - ide_pio_timings[pio].active_time - - ide_pio_timings[pio].setup_time; + recTime = cycle_time - tim->active - tim->setup; recTime = max(recTime, 150U); - accessTime = ide_pio_timings[pio].active_time; + accessTime = tim->active; accessTime = max(accessTime, 150U); accessTicks = SYSCLK_TICKS(accessTime); accessTicks = min(accessTicks, 0x1fU); -- cgit v1.2.2 From c9d6c1a2379373219bb3271bdcbdc0ab2edf349d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:39 +0200 Subject: ide: move ide_pio_cycle_time() to ide-timings.c All ide_pio_cycle_time() users already select CONFIG_IDE_TIMINGS so move the function from ide-lib.c to ide-timings.c. While at it: - convert ide_pio_cycle_time() to use ide_timing_find_mode() - cleanup ide_pio_cycle_time() a bit There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-lib.c | 23 ----------------------- drivers/ide/ide-timings.c | 22 ++++++++++++++++++++++ 2 files changed, 22 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 7e053d217732..efa5bfa64d01 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -188,29 +188,6 @@ static int ide_scan_pio_blacklist (char *model) return -1; } -unsigned int ide_pio_cycle_time(ide_drive_t *drive, u8 pio) -{ - struct hd_driveid *id = drive->id; - int cycle_time = 0; - - if (id->field_valid & 2) { - if (id->capability & 8) - cycle_time = id->eide_pio_iordy; - else - cycle_time = id->eide_pio; - } - - /* conservative "downgrade" for all pre-ATA2 drives */ - if (pio < 3) { - if (cycle_time && cycle_time < ide_pio_timings[pio].cycle_time) - cycle_time = 0; /* use standard timing */ - } - - return cycle_time ? cycle_time : ide_pio_timings[pio].cycle_time; -} - -EXPORT_SYMBOL_GPL(ide_pio_cycle_time); - /** * ide_get_best_pio_mode - get PIO mode from drive * @drive: drive to consider diff --git a/drivers/ide/ide-timings.c b/drivers/ide/ide-timings.c index ebef6d4e3f63..8c2f8327f487 100644 --- a/drivers/ide/ide-timings.c +++ b/drivers/ide/ide-timings.c @@ -1,5 +1,6 @@ /* * Copyright (c) 1999-2001 Vojtech Pavlik + * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -75,6 +76,27 @@ struct ide_timing *ide_timing_find_mode(u8 speed) } EXPORT_SYMBOL_GPL(ide_timing_find_mode); +u16 ide_pio_cycle_time(ide_drive_t *drive, u8 pio) +{ + struct hd_driveid *id = drive->id; + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); + u16 cycle = 0; + + if (id->field_valid & 2) { + if (id->capability & 8) + cycle = id->eide_pio_iordy; + else + cycle = id->eide_pio; + + /* conservative "downgrade" for all pre-ATA2 drives */ + if (pio < 3 && cycle < t->cycle) + cycle = 0; /* use standard timing */ + } + + return cycle ? cycle : t->cycle; +} +EXPORT_SYMBOL_GPL(ide_pio_cycle_time); + #define ENOUGH(v, unit) (((v) - 1) / (unit) + 1) #define EZ(v, unit) ((v) ? ENOUGH(v, unit) : 0) -- cgit v1.2.2 From 3e153cfb5e38ae237ff27a10a833946ac95db8a4 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:39 +0200 Subject: ide: remove no longer used ide_pio_timings[] Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-lib.c | 17 ----------------- 1 file changed, 17 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index efa5bfa64d01..3e12f229bd5f 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -75,23 +75,6 @@ static u8 ide_rate_filter(ide_drive_t *drive, u8 speed) return min(speed, mode); } -/* - * Standard (generic) timings for PIO modes, from ATA2 specification. - * These timings are for access to the IDE data port register *only*. - * Some drives may specify a mode, while also specifying a different - * value for cycle_time (from drive identification data). - */ -const ide_pio_timings_t ide_pio_timings[6] = { - { 70, 165, 600 }, /* PIO Mode 0 */ - { 50, 125, 383 }, /* PIO Mode 1 */ - { 30, 100, 240 }, /* PIO Mode 2 */ - { 30, 80, 180 }, /* PIO Mode 3 with IORDY */ - { 25, 70, 120 }, /* PIO Mode 4 with IORDY */ - { 20, 50, 100 } /* PIO Mode 5 with IORDY (nonstandard) */ -}; - -EXPORT_SYMBOL_GPL(ide_pio_timings); - /* * Shared data/functions for determining best PIO mode for an IDE drive. * Most of this stuff originally lived in cmd640.c, and changes to the -- cgit v1.2.2 From 9ad540937554a3779c5fe7af13aa390b1d2aeb3e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:39 +0200 Subject: ide: move PIO blacklist to ide-pio-blacklist.c Move PIO blacklist to ide-pio-blacklist.c. While at it: - fix comment - fix whitespace damage There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Makefile | 3 +- drivers/ide/ide-lib.c | 96 ----------------------------------------- drivers/ide/ide-pio-blacklist.c | 94 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 96 insertions(+), 97 deletions(-) create mode 100644 drivers/ide/ide-pio-blacklist.c (limited to 'drivers') diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index cb1350684c9a..8605536ea18f 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -11,7 +11,8 @@ EXTRA_CFLAGS += -Idrivers/ide -ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o +ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o \ + ide-pio-blacklist.o # core IDE code ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 3e12f229bd5f..13af72f09ec4 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -75,102 +75,6 @@ static u8 ide_rate_filter(ide_drive_t *drive, u8 speed) return min(speed, mode); } -/* - * Shared data/functions for determining best PIO mode for an IDE drive. - * Most of this stuff originally lived in cmd640.c, and changes to the - * ide_pio_blacklist[] table should be made with EXTREME CAUTION to avoid - * breaking the fragile cmd640.c support. - */ - -/* - * Black list. Some drives incorrectly report their maximal PIO mode, - * at least in respect to CMD640. Here we keep info on some known drives. - */ -static struct ide_pio_info { - const char *name; - int pio; -} ide_pio_blacklist [] = { - { "Conner Peripherals 540MB - CFS540A", 3 }, - - { "WDC AC2700", 3 }, - { "WDC AC2540", 3 }, - { "WDC AC2420", 3 }, - { "WDC AC2340", 3 }, - { "WDC AC2250", 0 }, - { "WDC AC2200", 0 }, - { "WDC AC21200", 4 }, - { "WDC AC2120", 0 }, - { "WDC AC2850", 3 }, - { "WDC AC1270", 3 }, - { "WDC AC1170", 1 }, - { "WDC AC1210", 1 }, - { "WDC AC280", 0 }, - { "WDC AC31000", 3 }, - { "WDC AC31200", 3 }, - - { "Maxtor 7131 AT", 1 }, - { "Maxtor 7171 AT", 1 }, - { "Maxtor 7213 AT", 1 }, - { "Maxtor 7245 AT", 1 }, - { "Maxtor 7345 AT", 1 }, - { "Maxtor 7546 AT", 3 }, - { "Maxtor 7540 AV", 3 }, - - { "SAMSUNG SHD-3121A", 1 }, - { "SAMSUNG SHD-3122A", 1 }, - { "SAMSUNG SHD-3172A", 1 }, - - { "ST5660A", 3 }, - { "ST3660A", 3 }, - { "ST3630A", 3 }, - { "ST3655A", 3 }, - { "ST3391A", 3 }, - { "ST3390A", 1 }, - { "ST3600A", 1 }, - { "ST3290A", 0 }, - { "ST3144A", 0 }, - { "ST3491A", 1 }, /* reports 3, should be 1 or 2 (depending on */ - /* drive) according to Seagates FIND-ATA program */ - - { "QUANTUM ELS127A", 0 }, - { "QUANTUM ELS170A", 0 }, - { "QUANTUM LPS240A", 0 }, - { "QUANTUM LPS210A", 3 }, - { "QUANTUM LPS270A", 3 }, - { "QUANTUM LPS365A", 3 }, - { "QUANTUM LPS540A", 3 }, - { "QUANTUM LIGHTNING 540A", 3 }, - { "QUANTUM LIGHTNING 730A", 3 }, - - { "QUANTUM FIREBALL_540", 3 }, /* Older Quantum Fireballs don't work */ - { "QUANTUM FIREBALL_640", 3 }, - { "QUANTUM FIREBALL_1080", 3 }, - { "QUANTUM FIREBALL_1280", 3 }, - { NULL, 0 } -}; - -/** - * ide_scan_pio_blacklist - check for a blacklisted drive - * @model: Drive model string - * - * This routine searches the ide_pio_blacklist for an entry - * matching the start/whole of the supplied model name. - * - * Returns -1 if no match found. - * Otherwise returns the recommended PIO mode from ide_pio_blacklist[]. - */ - -static int ide_scan_pio_blacklist (char *model) -{ - struct ide_pio_info *p; - - for (p = ide_pio_blacklist; p->name != NULL; p++) { - if (strncmp(p->name, model, strlen(p->name)) == 0) - return p->pio; - } - return -1; -} - /** * ide_get_best_pio_mode - get PIO mode from drive * @drive: drive to consider diff --git a/drivers/ide/ide-pio-blacklist.c b/drivers/ide/ide-pio-blacklist.c new file mode 100644 index 000000000000..a8c2c8f8660a --- /dev/null +++ b/drivers/ide/ide-pio-blacklist.c @@ -0,0 +1,94 @@ +/* + * PIO blacklist. Some drives incorrectly report their maximal PIO mode, + * at least in respect to CMD640. Here we keep info on some known drives. + * + * Changes to the ide_pio_blacklist[] should be made with EXTREME CAUTION + * to avoid breaking the fragile cmd640.c support. + */ + +#include + +static struct ide_pio_info { + const char *name; + int pio; +} ide_pio_blacklist [] = { + { "Conner Peripherals 540MB - CFS540A", 3 }, + + { "WDC AC2700", 3 }, + { "WDC AC2540", 3 }, + { "WDC AC2420", 3 }, + { "WDC AC2340", 3 }, + { "WDC AC2250", 0 }, + { "WDC AC2200", 0 }, + { "WDC AC21200", 4 }, + { "WDC AC2120", 0 }, + { "WDC AC2850", 3 }, + { "WDC AC1270", 3 }, + { "WDC AC1170", 1 }, + { "WDC AC1210", 1 }, + { "WDC AC280", 0 }, + { "WDC AC31000", 3 }, + { "WDC AC31200", 3 }, + + { "Maxtor 7131 AT", 1 }, + { "Maxtor 7171 AT", 1 }, + { "Maxtor 7213 AT", 1 }, + { "Maxtor 7245 AT", 1 }, + { "Maxtor 7345 AT", 1 }, + { "Maxtor 7546 AT", 3 }, + { "Maxtor 7540 AV", 3 }, + + { "SAMSUNG SHD-3121A", 1 }, + { "SAMSUNG SHD-3122A", 1 }, + { "SAMSUNG SHD-3172A", 1 }, + + { "ST5660A", 3 }, + { "ST3660A", 3 }, + { "ST3630A", 3 }, + { "ST3655A", 3 }, + { "ST3391A", 3 }, + { "ST3390A", 1 }, + { "ST3600A", 1 }, + { "ST3290A", 0 }, + { "ST3144A", 0 }, + { "ST3491A", 1 }, /* reports 3, should be 1 or 2 (depending on drive) + according to Seagate's FIND-ATA program */ + + { "QUANTUM ELS127A", 0 }, + { "QUANTUM ELS170A", 0 }, + { "QUANTUM LPS240A", 0 }, + { "QUANTUM LPS210A", 3 }, + { "QUANTUM LPS270A", 3 }, + { "QUANTUM LPS365A", 3 }, + { "QUANTUM LPS540A", 3 }, + { "QUANTUM LIGHTNING 540A", 3 }, + { "QUANTUM LIGHTNING 730A", 3 }, + + { "QUANTUM FIREBALL_540", 3 }, /* Older Quantum Fireballs don't work */ + { "QUANTUM FIREBALL_640", 3 }, + { "QUANTUM FIREBALL_1080", 3 }, + { "QUANTUM FIREBALL_1280", 3 }, + { NULL, 0 } +}; + +/** + * ide_scan_pio_blacklist - check for a blacklisted drive + * @model: Drive model string + * + * This routine searches the ide_pio_blacklist for an entry + * matching the start/whole of the supplied model name. + * + * Returns -1 if no match found. + * Otherwise returns the recommended PIO mode from ide_pio_blacklist[]. + */ + +int ide_scan_pio_blacklist(char *model) +{ + struct ide_pio_info *p; + + for (p = ide_pio_blacklist; p->name != NULL; p++) { + if (strncmp(p->name, model, strlen(p->name)) == 0) + return p->pio; + } + return -1; +} -- cgit v1.2.2 From 256c5f8eef7b9a8c8a85c15c58cda9df455f947e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:39 +0200 Subject: ide: fix hwif-s initialization * Add ide_hwifs[] entry initialization to ide_find_port_slot() and remove ide_init_port_data() calls from host drivers. * Unexport ide_init_port_data(). * Remove no longer needed init_ide_data(). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/palm_bk3710.c | 1 - drivers/ide/h8300/ide-h8300.c | 1 - drivers/ide/ide-pnp.c | 1 - drivers/ide/ide-probe.c | 10 +++++++--- drivers/ide/ide.c | 15 --------------- drivers/ide/legacy/buddha.c | 1 - drivers/ide/legacy/falconide.c | 1 - drivers/ide/legacy/gayle.c | 1 - drivers/ide/legacy/ide-cs.c | 1 - drivers/ide/legacy/macide.c | 1 - drivers/ide/legacy/q40ide.c | 1 - drivers/ide/pci/delkin_cb.c | 1 - 12 files changed, 7 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index 9b8a45d2cf17..c79b85b6e4a3 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -400,7 +400,6 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) i = hwif->index; - ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); default_hwif_mmiops(hwif); diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index ae37ee58bae2..dfce105bae64 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -199,7 +199,6 @@ static int __init h8300_ide_init(void) } index = hwif->index; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); hwif_setup(hwif); hwif->host_flags = IDE_HFLAG_NO_IO_32BIT; diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index adbd01784162..fc1e10c9d1cd 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -62,7 +62,6 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) u8 index = hwif->index; u8 idx[4] = { index, 0xff, 0xff, 0xff }; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index d21e51a02c3e..592d424412ea 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1473,22 +1473,26 @@ ide_hwif_t *ide_find_port_slot(const struct ide_port_info *d) for (; i < MAX_HWIFS; i++) { hwif = &ide_hwifs[i]; if (hwif->chipset == ide_unknown) - return hwif; + goto out_found; } } else { for (i = 2; i < MAX_HWIFS; i++) { hwif = &ide_hwifs[i]; if (hwif->chipset == ide_unknown) - return hwif; + goto out_found; } for (i = 0; i < 2 && i < MAX_HWIFS; i++) { hwif = &ide_hwifs[i]; if (hwif->chipset == ide_unknown) - return hwif; + goto out_found; } } return NULL; + +out_found: + ide_init_port_data(hwif, i); + return hwif; } EXPORT_SYMBOL_GPL(ide_find_port_slot); diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 2b8453510e09..32d8ee281d56 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -121,7 +121,6 @@ void ide_init_port_data(ide_hwif_t *hwif, unsigned int index) ide_port_init_devices_data(hwif); } -EXPORT_SYMBOL_GPL(ide_init_port_data); static void ide_port_init_devices_data(ide_hwif_t *hwif) { @@ -150,18 +149,6 @@ static void ide_port_init_devices_data(ide_hwif_t *hwif) } } -static void __init init_ide_data (void) -{ - unsigned int index; - - /* Initialise all interface structures */ - for (index = 0; index < MAX_HWIFS; ++index) { - ide_hwif_t *hwif = &ide_hwifs[index]; - - ide_init_port_data(hwif, index); - } -} - void ide_remove_port_from_hwgroup(ide_hwif_t *hwif) { ide_hwgroup_t *hwgroup = hwif->hwgroup; @@ -1021,8 +1008,6 @@ static int __init ide_init(void) goto out_port_class; } - init_ide_data(); - proc_ide_create(); return 0; diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c index 9a1d27ef3f8a..0497e7f85b09 100644 --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/legacy/buddha.c @@ -227,7 +227,6 @@ fail_base2: if (hwif) { u8 index = hwif->index; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); idx[i] = index; diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c index af11028b4794..129a812bb57f 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/legacy/falconide.c @@ -111,7 +111,6 @@ static int __init falconide_init(void) u8 index = hwif->index; u8 idx[4] = { index, 0xff, 0xff, 0xff }; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); /* Atari has a byte-swapped IDE interface */ diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index b78941680c32..7e74b20202df 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -185,7 +185,6 @@ found: if (hwif) { u8 index = hwif->index; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); idx[i] = index; diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 8dbf4d9b6447..7c69608154c2 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -187,7 +187,6 @@ static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl, i = hwif->index; - ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); hwif->port_ops = &idecs_port_ops; diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index 2e84290d0bcc..0a6195bcfeda 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -130,7 +130,6 @@ static int __init macide_init(void) u8 index = hwif->index; u8 idx[4] = { index, 0xff, 0xff, 0xff }; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); ide_device_add(idx, NULL); diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index 8ff6e2d20834..9c2b9d078f69 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -142,7 +142,6 @@ static int __init q40ide_init(void) hwif = ide_find_port(); if (hwif) { - ide_init_port_data(hwif, hwif->index); ide_init_port_hw(hwif, &hw); /* Q40 has a byte-swapped IDE interface */ diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index af0f30051d5a..0106e2a2df77 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -93,7 +93,6 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) i = hwif->index; - ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); idx[0] = i; -- cgit v1.2.2 From 63b51c6d1d63276fd320615c042f1ff5d94ebab8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:40 +0200 Subject: ide: make ide_hwifs[] static Move ide_hwifs[] from ide.c to ide-probe.c and make it static. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 2 ++ drivers/ide/ide.c | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 592d424412ea..97dda05914a1 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -39,6 +39,8 @@ #include #include +static ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */ + /** * generic_id - add a generic drive id * @drive: drive to make an ID block for diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 32d8ee281d56..b7855a13f0ef 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -91,8 +91,6 @@ DEFINE_MUTEX(ide_cfg_mtx); __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock); EXPORT_SYMBOL(ide_lock); -ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */ - static void ide_port_init_devices_data(ide_hwif_t *); /* -- cgit v1.2.2 From c56c5648a3bd15ff14c50f284b261140cd5b5472 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:40 +0200 Subject: ide: set hwif->dev in ide_init_port_hw() (take 2) * Add 'parent' field to hw_regs_t for optional parent device pointer (needed by macio PMAC IDE controllers) and set hwif->dev in ide_init_port_hw(). * Update au1xxx-ide.c, sgiioc4.c, pmac.c and setup-pci.c accordingly. v2: * Update scc_pata.c. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide.c | 3 ++- drivers/ide/mips/au1xxx-ide.c | 2 -- drivers/ide/pci/scc_pata.c | 1 - drivers/ide/pci/sgiioc4.c | 2 -- drivers/ide/ppc/pmac.c | 6 ++---- drivers/ide/setup-pci.c | 2 -- 6 files changed, 4 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index b7855a13f0ef..9240888e5efd 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -297,7 +297,8 @@ void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw) memcpy(&hwif->io_ports, &hw->io_ports, sizeof(hwif->io_ports)); hwif->irq = hw->irq; hwif->chipset = hw->chipset; - hwif->gendev.parent = hw->dev; + hwif->dev = hw->dev; + hwif->gendev.parent = hw->parent ? hw->parent : hw->dev; hwif->ack_intr = hw->ack_intr; } EXPORT_SYMBOL_GPL(ide_init_port_hw); diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index 1a6c27b32498..08c46c36b7e7 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -600,8 +600,6 @@ static int au_ide_probe(struct device *dev) ide_init_port_hw(hwif, &hw); - hwif->dev = dev; - /* If the user has selected DDMA assisted copies, then set up a few local I/O function entry points */ diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 1584ebb6a185..71bff3131b96 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -572,7 +572,6 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev, hw.dev = &dev->dev; hw.chipset = ide_pci; ide_init_port_hw(hwif, &hw); - hwif->dev = &dev->dev; idx[0] = hwif->index; diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index 24513e3dcd6b..af91cc525789 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -625,8 +625,6 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) hw.dev = &dev->dev; ide_init_port_hw(hwif, &hw); - hwif->dev = &dev->dev; - /* The IOC4 uses MMIO rather than Port IO. */ default_hwif_mmiops(hwif); diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index cfa103a51b31..93fb9067c043 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1148,8 +1148,6 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) base = ioremap(macio_resource_start(mdev, 0), 0x400); regbase = (unsigned long) base; - hwif->dev = &mdev->bus->pdev->dev; - pmif->mdev = mdev; pmif->node = mdev->ofdev.node; pmif->regbase = regbase; @@ -1171,7 +1169,8 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) memset(&hw, 0, sizeof(hw)); pmac_ide_init_ports(&hw, pmif->regbase); hw.irq = irq; - hw.dev = &mdev->ofdev.dev; + hw.dev = &mdev->bus->pdev->dev; + hw.parent = &mdev->ofdev.dev; rc = pmac_ide_setup_device(pmif, hwif, &hw); if (rc != 0) { @@ -1271,7 +1270,6 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) goto out_free_pmif; } - hwif->dev = &pdev->dev; pmif->mdev = NULL; pmif->node = np; diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index abcfb1739d4d..3dea5a59626e 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -346,8 +346,6 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, ide_init_port_hw(hwif, &hw); - hwif->dev = &dev->dev; - return hwif; } -- cgit v1.2.2 From a536f326a2223c951818e199e23847c2ac5e483b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:40 +0200 Subject: au1xxx-ide: don't use hwif->hwif_data * Use &auide_hwif directly instead of using hwif->hwif_data. While at it: * No need to initialize hwif->{select,config}_data. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/mips/au1xxx-ide.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index 08c46c36b7e7..48d57cae63c6 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -213,10 +213,8 @@ static int auide_build_dmatable(ide_drive_t *drive) { int i, iswrite, count = 0; ide_hwif_t *hwif = HWIF(drive); - struct request *rq = HWGROUP(drive)->rq; - - _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; + _auide_hwif *ahwif = &auide_hwif; struct scatterlist *sg; iswrite = (rq_data_dir(rq) == WRITE); @@ -402,7 +400,7 @@ static const struct ide_dma_ops au1xxx_dma_ops = { static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) { - _auide_hwif *auide = (_auide_hwif *)hwif->hwif_data; + _auide_hwif *auide = &auide_hwif; dbdev_tab_t source_dev_tab, target_dev_tab; u32 dev_id, tsize, devwidth, flags; @@ -463,7 +461,7 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) #else static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) { - _auide_hwif *auide = (_auide_hwif *)hwif->hwif_data; + _auide_hwif *auide = &auide_hwif; dbdev_tab_t source_dev_tab; int flags; @@ -608,11 +606,8 @@ static int au_ide_probe(struct device *dev) hwif->input_data = au1xxx_input_data; hwif->output_data = au1xxx_output_data; #endif - hwif->select_data = 0; /* no chipset-specific code */ - hwif->config_data = 0; /* no chipset-specific code */ auide_hwif.hwif = hwif; - hwif->hwif_data = &auide_hwif; idx[0] = hwif->index; -- cgit v1.2.2 From f333f92bf9040fb63d13c184295629c7a0ff449f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:40 +0200 Subject: ide_4drives: use struct ide_port_info Convert the driver to use struct ide_port_info - as a nice side-effect this fixes hwif->channel initialization. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/legacy/ide-4drives.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/legacy/ide-4drives.c index ecae916a3385..5cd6ce537eea 100644 --- a/drivers/ide/legacy/ide-4drives.c +++ b/drivers/ide/legacy/ide-4drives.c @@ -11,6 +11,23 @@ static int probe_4drives; module_param_named(probe, probe_4drives, bool, 0); MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port"); +static void ide_4drives_port_init_devs(ide_hwif_t *hwif) +{ + if (hwif->channel) { + hwif->drives[0].select.all ^= 0x20; + hwif->drives[1].select.all ^= 0x20; + } +} + +static const struct ide_port_ops ide_4drives_port_ops = { + .port_init_devs = ide_4drives_port_init_devs, +}; + +static const struct ide_port_info ide_4drives_port_info = { + .port_ops = &ide_4drives_port_ops, + .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA, +}; + static int __init ide_4drives_init(void) { ide_hwif_t *hwif, *mate; @@ -49,18 +66,10 @@ static int __init ide_4drives_init(void) mate = ide_find_port(); if (mate) { ide_init_port_hw(mate, &hw); - mate->drives[0].select.all ^= 0x20; - mate->drives[1].select.all ^= 0x20; idx[1] = mate->index; - - if (hwif) { - hwif->mate = mate; - mate->mate = hwif; - hwif->serialized = mate->serialized = 1; - } } - ide_device_add(idx, NULL); + ide_device_add(idx, &ide_4drives_port_info); return 0; } -- cgit v1.2.2 From dccdf527379dc2fe8a4efc5c75601d1d4035a750 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:40 +0200 Subject: ide-cs: use struct ide_port_info Convert the driver to use struct ide_port_info. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/legacy/ide-cs.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 7c69608154c2..fc53dcfbfe38 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -154,6 +154,11 @@ static const struct ide_port_ops idecs_port_ops = { .quirkproc = ide_undecoded_slave, }; +static const struct ide_port_info idecs_port_info = { + .port_ops = &idecs_port_ops, + .host_flags = IDE_HFLAG_NO_DMA, +}; + static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle) { @@ -188,11 +193,10 @@ static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl, i = hwif->index; ide_init_port_hw(hwif, &hw); - hwif->port_ops = &idecs_port_ops; idx[0] = i; - ide_device_add(idx, NULL); + ide_device_add(idx, &idecs_port_info); if (hwif->present) return hwif; -- cgit v1.2.2 From 26839f09ca2d0f4239e546cd912bc9f4694f3c5e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:40 +0200 Subject: icside: don't use hwif->hwif_data * Move ecard_set_drvdata() from icside_probe() to icside_register_v{5,6}(), then use state->ioc_base instead of hwif->hwif_data in icside_maskproc() and icside_dma_test_irq(). While at it: * Add sel field to struct icside_state, then use state->{sel,ioc_base} instead of ->{select,config}_data in icside_dma_setup(). There should be no functional changes caused by this patch. Cc: Russell King Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/icside.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index 061456914ca3..743958044278 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -68,6 +68,7 @@ struct icside_state { unsigned int enabled; void __iomem *irq_port; void __iomem *ioc_base; + unsigned int sel; unsigned int type; ide_hwif_t *hwif[2]; }; @@ -165,7 +166,8 @@ static const expansioncard_ops_t icside_ops_arcin_v6 = { static void icside_maskproc(ide_drive_t *drive, int mask) { ide_hwif_t *hwif = HWIF(drive); - struct icside_state *state = hwif->hwif_data; + struct expansion_card *ec = ECARD_DEV(hwif->dev); + struct icside_state *state = ecard_get_drvdata(ec); unsigned long flags; local_irq_save(flags); @@ -308,6 +310,7 @@ static int icside_dma_setup(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct expansion_card *ec = ECARD_DEV(hwif->dev); + struct icside_state *state = ecard_get_drvdata(ec); struct request *rq = hwif->hwgroup->rq; unsigned int dma_mode; @@ -331,7 +334,7 @@ static int icside_dma_setup(ide_drive_t *drive) /* * Route the DMA signals to the correct interface. */ - writeb(hwif->select_data, hwif->config_data); + writeb(state->sel | hwif->channel, state->ioc_base); /* * Select the correct timing for this drive. @@ -359,7 +362,8 @@ static void icside_dma_exec_cmd(ide_drive_t *drive, u8 cmd) static int icside_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); - struct icside_state *state = hwif->hwif_data; + struct expansion_card *ec = ECARD_DEV(hwif->dev); + struct icside_state *state = ecard_get_drvdata(ec); return readb(state->irq_port + (hwif->channel ? @@ -472,6 +476,8 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec) state->hwif[0] = hwif; + ecard_set_drvdata(ec, state); + idx[0] = hwif->index; ide_device_add(idx, NULL); @@ -525,6 +531,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) state->irq_port = easi_base; state->ioc_base = ioc_base; + state->sel = sel; /* * Be on the safe side - disable interrupts @@ -545,13 +552,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) state->hwif[0] = hwif; state->hwif[1] = mate; - hwif->hwif_data = state; - hwif->config_data = (unsigned long)ioc_base; - hwif->select_data = sel; - - mate->hwif_data = state; - mate->config_data = (unsigned long)ioc_base; - mate->select_data = sel | 1; + ecard_set_drvdata(ec, state); if (ec->dma != NO_DMA && !request_dma(ec->dma, hwif->name)) { d.init_dma = icside_dma_init; @@ -627,10 +628,8 @@ icside_probe(struct expansion_card *ec, const struct ecard_id *id) break; } - if (ret == 0) { - ecard_set_drvdata(ec, state); + if (ret == 0) goto out; - } kfree(state); release: -- cgit v1.2.2 From b25afdf1336237fb0e4021eb35744e577e19bd14 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:41 +0200 Subject: icside: use ide_init_port_hw() * Move ide_find_port() and default_hwif_mmiops() calls from icside_setup() to icside_register_v{5,6}(). * Convert icside_setup() to initialize hw_regs_t instead ide_hwif_t and icside_register_v{5,6}() to use ide_init_port_hw(). * Rename icside_setup() to icside_setup_ports(). There should be no functional changes caused by this patch. Cc: Russell King Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/icside.c | 72 +++++++++++++++++++++++++----------------------- 1 file changed, 38 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index 743958044278..c8d860060329 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -415,36 +415,24 @@ static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d) return -EOPNOTSUPP; } -static ide_hwif_t * -icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *ec) +static void icside_setup_ports(hw_regs_t *hw, void __iomem *base, + struct cardinfo *info, struct expansion_card *ec) { unsigned long port = (unsigned long)base + info->dataoffset; - ide_hwif_t *hwif; - hwif = ide_find_port(); - if (hwif) { - /* - * Ensure we're using MMIO - */ - default_hwif_mmiops(hwif); - - hwif->io_ports.data_addr = port; - hwif->io_ports.error_addr = port + (1 << info->stepping); - hwif->io_ports.nsect_addr = port + (2 << info->stepping); - hwif->io_ports.lbal_addr = port + (3 << info->stepping); - hwif->io_ports.lbam_addr = port + (4 << info->stepping); - hwif->io_ports.lbah_addr = port + (5 << info->stepping); - hwif->io_ports.device_addr = port + (6 << info->stepping); - hwif->io_ports.status_addr = port + (7 << info->stepping); - hwif->io_ports.ctl_addr = - (unsigned long)base + info->ctrloffset; - hwif->irq = ec->irq; - hwif->chipset = ide_acorn; - hwif->gendev.parent = &ec->dev; - hwif->dev = &ec->dev; - } - - return hwif; + hw->io_ports.data_addr = port; + hw->io_ports.error_addr = port + (1 << info->stepping); + hw->io_ports.nsect_addr = port + (2 << info->stepping); + hw->io_ports.lbal_addr = port + (3 << info->stepping); + hw->io_ports.lbam_addr = port + (4 << info->stepping); + hw->io_ports.lbah_addr = port + (5 << info->stepping); + hw->io_ports.device_addr = port + (6 << info->stepping); + hw->io_ports.status_addr = port + (7 << info->stepping); + hw->io_ports.ctl_addr = (unsigned long)base + info->ctrloffset; + + hw->irq = ec->irq; + hw->dev = &ec->dev; + hw->chipset = ide_acorn; } static int __init @@ -453,6 +441,7 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec) ide_hwif_t *hwif; void __iomem *base; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + hw_regs_t hw; base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0); if (!base) @@ -470,10 +459,15 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec) */ icside_irqdisable_arcin_v5(ec, 0); - hwif = icside_setup(base, &icside_cardinfo_v5, ec); + icside_setup_ports(&hw, base, &icside_cardinfo_v5, ec); + + hwif = ide_find_port(); if (!hwif) return -ENODEV; + ide_init_port_hw(hwif, &hw); + default_hwif_mmiops(hwif); + state->hwif[0] = hwif; ecard_set_drvdata(ec, state); @@ -503,6 +497,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) int ret; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; struct ide_port_info d = icside_v6_port_info; + hw_regs_t hw[2]; ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); if (!ioc_base) { @@ -538,16 +533,25 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) */ icside_irqdisable_arcin_v6(ec, 0); + icside_setup_ports(&hw[0], easi_base, &icside_cardinfo_v6_1, ec); + icside_setup_ports(&hw[1], easi_base, &icside_cardinfo_v6_2, ec); + /* * Find and register the interfaces. */ - hwif = icside_setup(easi_base, &icside_cardinfo_v6_1, ec); - mate = icside_setup(easi_base, &icside_cardinfo_v6_2, ec); + hwif = ide_find_port(); + if (hwif == NULL) + return -ENODEV; - if (!hwif || !mate) { - ret = -ENODEV; - goto out; - } + ide_init_port_hw(hwif, &hw[0]); + default_hwif_mmiops(hwif); + + mate = ide_find_port(); + if (mate == NULL) + return -ENODEV; + + ide_init_port_hw(mate, &hw[1]); + default_hwif_mmiops(mate); state->hwif[0] = hwif; state->hwif[1] = mate; -- cgit v1.2.2 From 01397012b3129147890bb116431d5a794dfc3990 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:41 +0200 Subject: sgiioc4: use driver name for resource allocation Cc: Jeremy Higdon Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/sgiioc4.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index af91cc525789..dd0d0f73ab16 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -608,11 +608,11 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) cmd_phys_base = bar0 + IOC4_CMD_OFFSET; if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE, - hwif->name)) { + DRV_NAME)) { printk(KERN_ERR "%s : %s -- ERROR, Addresses " "0x%p to 0x%p ALREADY in use\n", - __func__, hwif->name, (void *) cmd_phys_base, + __func__, DRV_NAME, (void *) cmd_phys_base, (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE); return -ENOMEM; } -- cgit v1.2.2 From c1da678b5b4d8ce7836ed1ded80109d1db37efe0 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:41 +0200 Subject: ide: tighten checks on PCI BARs in ide_hwif_configure() Alan has fixed PCI layer handling of PCI IDE in Compatibility mode so PCI BAR 0/1 (and/or 2/3) content reported by kernel should never be zero. Tighten checks on PCI BARs and also fix printk() message while on it. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/setup-pci.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 3dea5a59626e..166211f53f17 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -319,18 +319,18 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, ctl = pci_resource_start(dev, 2*port+1); base = pci_resource_start(dev, 2*port); - if ((ctl && !base) || (base && !ctl)) { - printk(KERN_ERR "%s: inconsistent baseregs (BIOS) " - "for port %d, skipping\n", d->name, port); - return NULL; - } - } - if (!ctl) { + } else { /* Use default values */ ctl = port ? 0x374 : 0x3f4; base = port ? 0x170 : 0x1f0; } + if (!base || !ctl) { + printk(KERN_ERR "%s: bad PCI BARs for port %d, skipping\n", + d->name, port); + return NULL; + } + hwif = ide_find_port_slot(d); if (hwif == NULL) { printk(KERN_ERR "%s: too many IDE interfaces, no room in " -- cgit v1.2.2 From e48905e9cfffd21861c3521d828ae992a53aac67 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:41 +0200 Subject: swarm: use struct ide_port_info Convert the driver to use struct ide_port_info. There should be no functional changes caused by this patch. Acked-by: Maciej W. Rozycki Tested-by: Maciej W. Rozycki Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/mips/swarm.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c index 52fee3d2771a..57a0138d0db6 100644 --- a/drivers/ide/mips/swarm.c +++ b/drivers/ide/mips/swarm.c @@ -61,6 +61,10 @@ static struct resource swarm_ide_resource = { static struct platform_device *swarm_ide_dev; +static const struct ide_port_info swarm_port_info = { + .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, +}; + /* * swarm_ide_probe - if the board header indicates the existence of * Generic Bus IDE, allocate a HWIF for it. @@ -110,7 +114,6 @@ static int __devinit swarm_ide_probe(struct device *dev) base = ioremap(offset, size); /* Setup MMIO ops. */ - hwif->host_flags = IDE_HFLAG_MMIO; default_hwif_mmiops(hwif); for (i = 0; i <= 7; i++) @@ -125,7 +128,7 @@ static int __devinit swarm_ide_probe(struct device *dev) idx[0] = hwif->index; - ide_device_add(idx, NULL); + ide_device_add(idx, &swarm_port_info); dev_set_drvdata(dev, hwif); -- cgit v1.2.2 From ba1d0de70d64e68f0e035f00dbb041c1e05b49c9 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 16 Jul 2008 20:33:41 +0200 Subject: powerpc/ide: remove mpc8xx-ide driver This driver was only used by arch/ppc code and is obsolete now with the move to common arch/powerpc code. [bart: port it over IDE tree, remove leftover 'choice' from Kconfig] Signed-off-by: Arnd Bergmann Acked-by: Kumar Gala Cc: Paul Mackerras Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 40 --- drivers/ide/ppc/Makefile | 1 - drivers/ide/ppc/mpc8xx.c | 844 ----------------------------------------------- 3 files changed, 885 deletions(-) delete mode 100644 drivers/ide/ppc/mpc8xx.c (limited to 'drivers') diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 5f4d6ea379f6..21511d47d926 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -929,46 +929,6 @@ config BLK_DEV_PALMCHIP_BK3710 Say Y here if you want to support the onchip IDE controller on the TI DaVinci SoC - -config BLK_DEV_MPC8xx_IDE - tristate "MPC8xx IDE support" - depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE - help - This option provides support for IDE on Motorola MPC8xx Systems. - Please see 'Type of MPC8xx IDE interface' for details. - - If unsure, say N. - -choice - prompt "Type of MPC8xx IDE interface" - depends on BLK_DEV_MPC8xx_IDE - default IDE_8xx_PCCARD - -config IDE_8xx_PCCARD - bool "8xx_PCCARD" - ---help--- - Select how the IDE devices are connected to the MPC8xx system: - - 8xx_PCCARD uses the 8xx internal PCMCIA interface in combination - with a PC Card (e.g. ARGOSY portable Hard Disk Adapter), - ATA PC Card HDDs or ATA PC Flash Cards (example: TQM8xxL - systems) - - 8xx_DIRECT is used for directly connected IDE devices using the 8xx - internal PCMCIA interface (example: IVMS8 systems) - - EXT_DIRECT is used for IDE devices directly connected to the 8xx - bus using some glue logic, but _not_ the 8xx internal - PCMCIA interface (example: IDIF860 systems) - -config IDE_8xx_DIRECT - bool "8xx_DIRECT" - -config IDE_EXT_DIRECT - bool "EXT_DIRECT" - -endchoice - # no isa -> no vlb if ISA && (ALPHA || X86 || MIPS) diff --git a/drivers/ide/ppc/Makefile b/drivers/ide/ppc/Makefile index 65af5848b28c..74e52adcdf4b 100644 --- a/drivers/ide/ppc/Makefile +++ b/drivers/ide/ppc/Makefile @@ -1,3 +1,2 @@ obj-$(CONFIG_BLK_DEV_IDE_PMAC) += pmac.o -obj-$(CONFIG_BLK_DEV_MPC8xx_IDE) += mpc8xx.o diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c deleted file mode 100644 index 33bc699814d7..000000000000 --- a/drivers/ide/ppc/mpc8xx.c +++ /dev/null @@ -1,844 +0,0 @@ -/* - * Copyright (C) 2000, 2001 Wolfgang Denk, wd@denx.de - * Modified for direct IDE interface - * by Thomas Lange, thomas@corelatus.com - * Modified for direct IDE interface on 8xx without using the PCMCIA - * controller - * by Steven.Scholz@imc-berlin.de - * Moved out of arch/ppc/kernel/m8xx_setup.c, other minor cleanups - * by Mathew Locke - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "ide-mpc8xx" - -static int identify (volatile u8 *p); -static void print_fixed (volatile u8 *p); -static void print_funcid (int func); -static int check_ide_device (unsigned long base); - -static void ide_interrupt_ack (void *dev); -static void m8xx_ide_set_pio_mode(ide_drive_t *drive, const u8 pio); - -typedef struct ide_ioport_desc { - unsigned long base_off; /* Offset to PCMCIA memory */ - unsigned long reg_off[IDE_NR_PORTS]; /* controller register offsets */ - int irq; /* IRQ */ -} ide_ioport_desc_t; - -ide_ioport_desc_t ioport_dsc[MAX_HWIFS] = { -#ifdef IDE0_BASE_OFFSET - { IDE0_BASE_OFFSET, - { - IDE0_DATA_REG_OFFSET, - IDE0_ERROR_REG_OFFSET, - IDE0_NSECTOR_REG_OFFSET, - IDE0_SECTOR_REG_OFFSET, - IDE0_LCYL_REG_OFFSET, - IDE0_HCYL_REG_OFFSET, - IDE0_SELECT_REG_OFFSET, - IDE0_STATUS_REG_OFFSET, - IDE0_CONTROL_REG_OFFSET, - IDE0_IRQ_REG_OFFSET, - }, - IDE0_INTERRUPT, - }, -#ifdef IDE1_BASE_OFFSET - { IDE1_BASE_OFFSET, - { - IDE1_DATA_REG_OFFSET, - IDE1_ERROR_REG_OFFSET, - IDE1_NSECTOR_REG_OFFSET, - IDE1_SECTOR_REG_OFFSET, - IDE1_LCYL_REG_OFFSET, - IDE1_HCYL_REG_OFFSET, - IDE1_SELECT_REG_OFFSET, - IDE1_STATUS_REG_OFFSET, - IDE1_CONTROL_REG_OFFSET, - IDE1_IRQ_REG_OFFSET, - }, - IDE1_INTERRUPT, - }, -#endif /* IDE1_BASE_OFFSET */ -#endif /* IDE0_BASE_OFFSET */ -}; - -struct ide_timing ide_pio_clocks[6]; -int hold_time[6] = {30, 20, 15, 10, 10, 10 }; /* PIO Mode 5 with IORDY (nonstandard) */ - -/* - * Warning: only 1 (ONE) PCMCIA slot supported here, - * which must be correctly initialized by the firmware (PPCBoot). - */ -static int _slot_ = -1; /* will be read from PCMCIA registers */ - -/* Make clock cycles and always round up */ -#define PCMCIA_MK_CLKS( t, T ) (( (t) * ((T)/1000000) + 999U ) / 1000U ) - -#define M8XX_PCMCIA_CD2(slot) (0x10000000 >> (slot << 4)) -#define M8XX_PCMCIA_CD1(slot) (0x08000000 >> (slot << 4)) - -/* - * The TQM850L hardware has two pins swapped! Grrrrgh! - */ -#ifdef CONFIG_TQM850L -#define __MY_PCMCIA_GCRX_CXRESET PCMCIA_GCRX_CXOE -#define __MY_PCMCIA_GCRX_CXOE PCMCIA_GCRX_CXRESET -#else -#define __MY_PCMCIA_GCRX_CXRESET PCMCIA_GCRX_CXRESET -#define __MY_PCMCIA_GCRX_CXOE PCMCIA_GCRX_CXOE -#endif - -#if defined(CONFIG_BLK_DEV_MPC8xx_IDE) && defined(CONFIG_IDE_8xx_PCCARD) -#define PCMCIA_SCHLVL IDE0_INTERRUPT /* Status Change Interrupt Level */ -static int pcmcia_schlvl = PCMCIA_SCHLVL; -#endif - -/* - * See include/linux/ide.h for definition of hw_regs_t (p, base) - */ - -/* - * m8xx_ide_init_ports() for a direct IDE interface _using_ - * MPC8xx's internal PCMCIA interface - */ -#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT) -static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) -{ - unsigned long *p = hw->io_ports_array; - int i; - - typedef struct { - ulong br; - ulong or; - } pcmcia_win_t; - volatile pcmcia_win_t *win; - volatile pcmconf8xx_t *pcmp; - - uint *pgcrx; - u32 pcmcia_phy_base; - u32 pcmcia_phy_end; - static unsigned long pcmcia_base = 0; - unsigned long base; - - *p = 0; - - pcmp = (pcmconf8xx_t *)(&(((immap_t *)IMAP_ADDR)->im_pcmcia)); - - if (!pcmcia_base) { - /* - * Read out PCMCIA registers. Since the reset values - * are undefined, we sure hope that they have been - * set up by firmware - */ - - /* Scan all registers for valid settings */ - pcmcia_phy_base = 0xFFFFFFFF; - pcmcia_phy_end = 0; - /* br0 is start of brX and orX regs */ - win = (pcmcia_win_t *) \ - (&(((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0)); - for (i = 0; i < 8; i++) { - if (win->or & 1) { /* This bank is marked as valid */ - if (win->br < pcmcia_phy_base) { - pcmcia_phy_base = win->br; - } - if ((win->br + PCMCIA_MEM_SIZE) > pcmcia_phy_end) { - pcmcia_phy_end = win->br + PCMCIA_MEM_SIZE; - } - /* Check which slot that has been defined */ - _slot_ = (win->or >> 2) & 1; - - } /* Valid bank */ - win++; - } /* for */ - - printk ("PCMCIA slot %c: phys mem %08x...%08x (size %08x)\n", - 'A' + _slot_, - pcmcia_phy_base, pcmcia_phy_end, - pcmcia_phy_end - pcmcia_phy_base); - - if (!request_mem_region(pcmcia_phy_base, - pcmcia_phy_end - pcmcia_phy_base, - DRV_NAME)) { - printk(KERN_ERR "%s: resources busy\n", DRV_NAME); - return -EBUSY; - } - - pcmcia_base=(unsigned long)ioremap(pcmcia_phy_base, - pcmcia_phy_end-pcmcia_phy_base); - -#ifdef DEBUG - printk ("PCMCIA virt base: %08lx\n", pcmcia_base); -#endif - /* Compute clock cycles for PIO timings */ - for (i=0; i<6; ++i) { - bd_t *binfo = (bd_t *)__res; - struct ide_timing *t, *n; - - hold_time[i] = - PCMCIA_MK_CLKS (hold_time[i], - binfo->bi_busfreq); - - t = ide_timing_find_mode(XFER_PIO_0 + i); - n = &ide_pio_clocks[i]; - - n->setup = PCMCIA_MK_CLKS(t->setup, binfo->bi_busfreq); - n->active = PCMCIA_MK_CLKS(t->active, binfo->bi_busfreq); - n->cycle = PCMCIA_MK_CLKS(t->cycle, binfo->bi_busfreq); -#if 0 - printk ("PIO mode %d timings: %d/%d/%d => %d/%d/%d\n", - i, - t->setup, t->active, t->cycle, - n->setup, n->active, n->cycle); -#endif - } - } - - if (_slot_ == -1) { - printk ("PCMCIA slot has not been defined! Using A as default\n"); - _slot_ = 0; - } - -#ifdef CONFIG_IDE_8xx_PCCARD - -#ifdef DEBUG - printk ("PIPR = 0x%08X slot %c ==> mask = 0x%X\n", - pcmp->pcmc_pipr, - 'A' + _slot_, - M8XX_PCMCIA_CD1(_slot_) | M8XX_PCMCIA_CD2(_slot_) ); -#endif /* DEBUG */ - - if (pcmp->pcmc_pipr & (M8XX_PCMCIA_CD1(_slot_)|M8XX_PCMCIA_CD2(_slot_))) { - printk ("No card in slot %c: PIPR=%08x\n", - 'A' + _slot_, (u32) pcmp->pcmc_pipr); - return -ENODEV; /* No card in slot */ - } - - check_ide_device (pcmcia_base); - -#endif /* CONFIG_IDE_8xx_PCCARD */ - - base = pcmcia_base + ioport_dsc[data_port].base_off; -#ifdef DEBUG - printk ("base: %08x + %08x = %08x\n", - pcmcia_base, ioport_dsc[data_port].base_off, base); -#endif - - for (i = 0; i < IDE_NR_PORTS; ++i) { -#ifdef DEBUG - printk ("port[%d]: %08x + %08x = %08x\n", - i, - base, - ioport_dsc[data_port].reg_off[i], - i, base + ioport_dsc[data_port].reg_off[i]); -#endif - *p++ = base + ioport_dsc[data_port].reg_off[i]; - } - - hw->irq = ioport_dsc[data_port].irq; - hw->ack_intr = (ide_ack_intr_t *)ide_interrupt_ack; - -#ifdef CONFIG_IDE_8xx_PCCARD - { - unsigned int reg; - - if (_slot_) - pgcrx = &((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pgcrb; - else - pgcrx = &((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pgcra; - - reg = *pgcrx; - reg |= mk_int_int_mask (pcmcia_schlvl) << 24; - reg |= mk_int_int_mask (pcmcia_schlvl) << 16; - *pgcrx = reg; - } -#endif /* CONFIG_IDE_8xx_PCCARD */ - - /* Enable Harddisk Interrupt, - * and make it edge sensitive - */ - /* (11-18) Set edge detect for irq, no wakeup from low power mode */ - ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel |= - (0x80000000 >> ioport_dsc[data_port].irq); - -#ifdef CONFIG_IDE_8xx_PCCARD - /* Make sure we don't get garbage irq */ - ((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pscr = 0xFFFF; - - /* Enable falling edge irq */ - pcmp->pcmc_per = 0x100000 >> (16 * _slot_); -#endif /* CONFIG_IDE_8xx_PCCARD */ - - hw->chipset = ide_generic; - - return 0; -} -#endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */ - -/* - * m8xx_ide_init_ports() for a direct IDE interface _not_ using - * MPC8xx's internal PCMCIA interface - */ -#if defined(CONFIG_IDE_EXT_DIRECT) -static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) -{ - unsigned long *p = hw->io_ports_array; - int i; - - u32 ide_phy_base; - u32 ide_phy_end; - static unsigned long ide_base = 0; - unsigned long base; - - *p = 0; - - if (!ide_base) { - - /* TODO: - * - add code to read ORx, BRx - */ - ide_phy_base = CFG_ATA_BASE_ADDR; - ide_phy_end = CFG_ATA_BASE_ADDR + 0x200; - - printk ("IDE phys mem : %08x...%08x (size %08x)\n", - ide_phy_base, ide_phy_end, - ide_phy_end - ide_phy_base); - - if (!request_mem_region(ide_phy_base, 0x200, DRV_NAME)) { - printk(KERN_ERR "%s: resources busy\n", DRV_NAME); - return -EBUSY; - } - - ide_base=(unsigned long)ioremap(ide_phy_base, - ide_phy_end-ide_phy_base); - -#ifdef DEBUG - printk ("IDE virt base: %08lx\n", ide_base); -#endif - } - - base = ide_base + ioport_dsc[data_port].base_off; -#ifdef DEBUG - printk ("base: %08x + %08x = %08x\n", - ide_base, ioport_dsc[data_port].base_off, base); -#endif - - for (i = 0; i < IDE_NR_PORTS; ++i) { -#ifdef DEBUG - printk ("port[%d]: %08x + %08x = %08x\n", - i, - base, - ioport_dsc[data_port].reg_off[i], - i, base + ioport_dsc[data_port].reg_off[i]); -#endif - *p++ = base + ioport_dsc[data_port].reg_off[i]; - } - - /* direct connected IDE drive, i.e. external IRQ */ - hw->irq = ioport_dsc[data_port].irq; - hw->ack_intr = (ide_ack_intr_t *)ide_interrupt_ack; - - /* Enable Harddisk Interrupt, - * and make it edge sensitive - */ - /* (11-18) Set edge detect for irq, no wakeup from low power mode */ - ((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |= - (0x80000000 >> ioport_dsc[data_port].irq); - - hw->chipset = ide_generic; - - return 0; -} -#endif /* CONFIG_IDE_8xx_DIRECT */ - - -/* -------------------------------------------------------------------- */ - - -/* PCMCIA Timing */ -#ifndef PCMCIA_SHT -#define PCMCIA_SHT(t) ((t & 0x0F)<<16) /* Strobe Hold Time */ -#define PCMCIA_SST(t) ((t & 0x0F)<<12) /* Strobe Setup Time */ -#define PCMCIA_SL(t) ((t==32) ? 0 : ((t & 0x1F)<<7)) /* Strobe Length */ -#endif - -/* Calculate PIO timings */ -static void m8xx_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ -#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT) - volatile pcmconf8xx_t *pcmp; - ulong timing, mask, reg; - - pcmp = (pcmconf8xx_t *)(&(((immap_t *)IMAP_ADDR)->im_pcmcia)); - - mask = ~(PCMCIA_SHT(0xFF) | PCMCIA_SST(0xFF) | PCMCIA_SL(0xFF)); - - timing = PCMCIA_SHT(hold_time[pio] ) - | PCMCIA_SST(ide_pio_clocks[pio].setup) - | PCMCIA_SL (ide_pio_clocks[pio].active) - ; - -#if 1 - printk ("Setting timing bits 0x%08lx in PCMCIA controller\n", timing); -#endif - if ((reg = pcmp->pcmc_por0 & mask) != 0) - pcmp->pcmc_por0 = reg | timing; - - if ((reg = pcmp->pcmc_por1 & mask) != 0) - pcmp->pcmc_por1 = reg | timing; - - if ((reg = pcmp->pcmc_por2 & mask) != 0) - pcmp->pcmc_por2 = reg | timing; - - if ((reg = pcmp->pcmc_por3 & mask) != 0) - pcmp->pcmc_por3 = reg | timing; - - if ((reg = pcmp->pcmc_por4 & mask) != 0) - pcmp->pcmc_por4 = reg | timing; - - if ((reg = pcmp->pcmc_por5 & mask) != 0) - pcmp->pcmc_por5 = reg | timing; - - if ((reg = pcmp->pcmc_por6 & mask) != 0) - pcmp->pcmc_por6 = reg | timing; - - if ((reg = pcmp->pcmc_por7 & mask) != 0) - pcmp->pcmc_por7 = reg | timing; - -#elif defined(CONFIG_IDE_EXT_DIRECT) - - printk("%s[%d] %s: not implemented yet!\n", - __FILE__, __LINE__, __func__); -#endif /* defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_PCMCIA */ -} - -static const struct ide_port_ops m8xx_port_ops = { - .set_pio_mode = m8xx_ide_set_pio_mode, -}; - -static void -ide_interrupt_ack (void *dev) -{ -#ifdef CONFIG_IDE_8xx_PCCARD - u_int pscr, pipr; - -#if (PCMCIA_SOCKETS_NO == 2) - u_int _slot_; -#endif - - /* get interrupt sources */ - - pscr = ((volatile immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr; - pipr = ((volatile immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pipr; - - /* - * report only if both card detect signals are the same - * not too nice done, - * we depend on that CD2 is the bit to the left of CD1... - */ - - if(_slot_==-1){ - printk("PCMCIA slot has not been defined! Using A as default\n"); - _slot_=0; - } - - if(((pipr & M8XX_PCMCIA_CD2(_slot_)) >> 1) ^ - (pipr & M8XX_PCMCIA_CD1(_slot_)) ) { - printk ("card detect interrupt\n"); - } - /* clear the interrupt sources */ - ((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr = pscr; - -#else /* ! CONFIG_IDE_8xx_PCCARD */ - /* - * Only CONFIG_IDE_8xx_PCCARD is using the interrupt of the - * MPC8xx's PCMCIA controller, so there is nothing to be done here - * for CONFIG_IDE_8xx_DIRECT and CONFIG_IDE_EXT_DIRECT. - * The interrupt is handled somewhere else. -- Steven - */ -#endif /* CONFIG_IDE_8xx_PCCARD */ -} - - - -/* - * CIS Tupel codes - */ -#define CISTPL_NULL 0x00 -#define CISTPL_DEVICE 0x01 -#define CISTPL_LONGLINK_CB 0x02 -#define CISTPL_INDIRECT 0x03 -#define CISTPL_CONFIG_CB 0x04 -#define CISTPL_CFTABLE_ENTRY_CB 0x05 -#define CISTPL_LONGLINK_MFC 0x06 -#define CISTPL_BAR 0x07 -#define CISTPL_PWR_MGMNT 0x08 -#define CISTPL_EXTDEVICE 0x09 -#define CISTPL_CHECKSUM 0x10 -#define CISTPL_LONGLINK_A 0x11 -#define CISTPL_LONGLINK_C 0x12 -#define CISTPL_LINKTARGET 0x13 -#define CISTPL_NO_LINK 0x14 -#define CISTPL_VERS_1 0x15 -#define CISTPL_ALTSTR 0x16 -#define CISTPL_DEVICE_A 0x17 -#define CISTPL_JEDEC_C 0x18 -#define CISTPL_JEDEC_A 0x19 -#define CISTPL_CONFIG 0x1a -#define CISTPL_CFTABLE_ENTRY 0x1b -#define CISTPL_DEVICE_OC 0x1c -#define CISTPL_DEVICE_OA 0x1d -#define CISTPL_DEVICE_GEO 0x1e -#define CISTPL_DEVICE_GEO_A 0x1f -#define CISTPL_MANFID 0x20 -#define CISTPL_FUNCID 0x21 -#define CISTPL_FUNCE 0x22 -#define CISTPL_SWIL 0x23 -#define CISTPL_END 0xff - -/* - * CIS Function ID codes - */ -#define CISTPL_FUNCID_MULTI 0x00 -#define CISTPL_FUNCID_MEMORY 0x01 -#define CISTPL_FUNCID_SERIAL 0x02 -#define CISTPL_FUNCID_PARALLEL 0x03 -#define CISTPL_FUNCID_FIXED 0x04 -#define CISTPL_FUNCID_VIDEO 0x05 -#define CISTPL_FUNCID_NETWORK 0x06 -#define CISTPL_FUNCID_AIMS 0x07 -#define CISTPL_FUNCID_SCSI 0x08 - -/* - * Fixed Disk FUNCE codes - */ -#define CISTPL_IDE_INTERFACE 0x01 - -#define CISTPL_FUNCE_IDE_IFACE 0x01 -#define CISTPL_FUNCE_IDE_MASTER 0x02 -#define CISTPL_FUNCE_IDE_SLAVE 0x03 - -/* First feature byte */ -#define CISTPL_IDE_SILICON 0x04 -#define CISTPL_IDE_UNIQUE 0x08 -#define CISTPL_IDE_DUAL 0x10 - -/* Second feature byte */ -#define CISTPL_IDE_HAS_SLEEP 0x01 -#define CISTPL_IDE_HAS_STANDBY 0x02 -#define CISTPL_IDE_HAS_IDLE 0x04 -#define CISTPL_IDE_LOW_POWER 0x08 -#define CISTPL_IDE_REG_INHIBIT 0x10 -#define CISTPL_IDE_HAS_INDEX 0x20 -#define CISTPL_IDE_IOIS16 0x40 - - -/* -------------------------------------------------------------------- */ - - -#define MAX_TUPEL_SZ 512 -#define MAX_FEATURES 4 - -static int check_ide_device (unsigned long base) -{ - volatile u8 *ident = NULL; - volatile u8 *feature_p[MAX_FEATURES]; - volatile u8 *p, *start; - int n_features = 0; - u8 func_id = ~0; - u8 code, len; - unsigned short config_base = 0; - int found = 0; - int i; - -#ifdef DEBUG - printk ("PCMCIA MEM: %08lX\n", base); -#endif - start = p = (volatile u8 *) base; - - while ((p - start) < MAX_TUPEL_SZ) { - - code = *p; p += 2; - - if (code == 0xFF) { /* End of chain */ - break; - } - - len = *p; p += 2; -#ifdef DEBUG_PCMCIA - { volatile u8 *q = p; - printk ("\nTuple code %02x length %d\n\tData:", - code, len); - - for (i = 0; i < len; ++i) { - printk (" %02x", *q); - q+= 2; - } - } -#endif /* DEBUG_PCMCIA */ - switch (code) { - case CISTPL_VERS_1: - ident = p + 4; - break; - case CISTPL_FUNCID: - func_id = *p; - break; - case CISTPL_FUNCE: - if (n_features < MAX_FEATURES) - feature_p[n_features++] = p; - break; - case CISTPL_CONFIG: - config_base = (*(p+6) << 8) + (*(p+4)); - default: - break; - } - p += 2 * len; - } - - found = identify (ident); - - if (func_id != ((u8)~0)) { - print_funcid (func_id); - - if (func_id == CISTPL_FUNCID_FIXED) - found = 1; - else - return (1); /* no disk drive */ - } - - for (i=0; i id_str) { - if (*t == ' ') - *t = '\0'; - else - break; - } - printk ("Card ID: %s\n", id_str); - - for (card=known_cards; *card; ++card) { - if (strcmp(*card, id_str) == 0) { /* found! */ - return (1); - } - } - - return (0); /* don't know */ -} - -static int __init mpc8xx_ide_probe(void) -{ - hw_regs_t hw; - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; - -#ifdef IDE0_BASE_OFFSET - memset(&hw, 0, sizeof(hw)); - if (!m8xx_ide_init_ports(&hw, 0)) { - ide_hwif_t *hwif = ide_find_port(); - - if (hwif) { - ide_init_port_hw(hwif, &hw); - hwif->pio_mask = ATA_PIO4; - hwif->port_ops = &m8xx_port_ops; - - idx[0] = hwif->index; - } - } -#ifdef IDE1_BASE_OFFSET - memset(&hw, 0, sizeof(hw)); - if (!m8xx_ide_init_ports(&hw, 1)) { - ide_hwif_t *mate = ide_find_port(); - - if (mate) { - ide_init_port_hw(mate, &hw); - mate->pio_mask = ATA_PIO4; - mate->port_ops = &m8xx_port_ops; - - idx[1] = mate->index; - } - } -#endif -#endif - - ide_device_add(idx, NULL); - - return 0; -} - -module_init(mpc8xx_ide_probe); - -MODULE_LICENSE("GPL"); -- cgit v1.2.2 From a698400a1556cf9f0376d1a41e536973dd5c4747 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:41 +0200 Subject: cmd640: fix warm-plug support for the secondary interface Register secondary interface also when user requested not to probe devices. While at it: - remove write-only second_port_toggled variable Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/cmd640.c | 51 ++++++++++++++++++++---------------------------- 1 file changed, 21 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index baa26a26709a..ab7d7274d8b1 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -687,9 +687,6 @@ static int cmd640x_init_one(unsigned long base, unsigned long ctl) */ static int __init cmd640x_init(void) { -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - int second_port_toggled = 0; -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ int second_port_cmd640 = 0, rc; const char *bus_type, *port2; unsigned int index; @@ -778,46 +775,40 @@ static int __init cmd640x_init(void) put_cmd640_reg(CMDTIM, 0); put_cmd640_reg(BRST, 0x40); - cmd_hwif1 = ide_find_port(); + b = get_cmd640_reg(CNTRL); /* * Try to enable the secondary interface, if not already enabled */ - if (cmd_hwif1 && - cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe) { - port2 = "not probed"; + if (secondary_port_responding()) { + if ((b & CNTRL_ENA_2ND)) { + second_port_cmd640 = 1; + port2 = "okay"; + } else if (cmd640_vlb) { + second_port_cmd640 = 1; + port2 = "alive"; + } else + port2 = "not cmd640"; } else { - b = get_cmd640_reg(CNTRL); + put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */ if (secondary_port_responding()) { - if ((b & CNTRL_ENA_2ND)) { - second_port_cmd640 = 1; - port2 = "okay"; - } else if (cmd640_vlb) { - second_port_cmd640 = 1; - port2 = "alive"; - } else - port2 = "not cmd640"; + second_port_cmd640 = 1; + port2 = "enabled"; } else { - put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */ - if (secondary_port_responding()) { - second_port_cmd640 = 1; -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - second_port_toggled = 1; -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ - port2 = "enabled"; - } else { - put_cmd640_reg(CNTRL, b); /* restore original setting */ - port2 = "not responding"; - } + put_cmd640_reg(CNTRL, b); /* restore original setting */ + port2 = "not responding"; } } /* * Initialize data for secondary cmd640 port, if enabled */ - if (second_port_cmd640 && cmd_hwif1) { - ide_init_port_hw(cmd_hwif1, &hw[1]); - idx[1] = cmd_hwif1->index; + if (second_port_cmd640) { + cmd_hwif1 = ide_find_port(); + if (cmd_hwif1) { + ide_init_port_hw(cmd_hwif1, &hw[1]); + idx[1] = cmd_hwif1->index; + } } printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n", second_port_cmd640 ? "" : "not ", port2); -- cgit v1.2.2 From e6d95bd14928926d6658b5e4ace905e8b83ed27a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:42 +0200 Subject: ide: ->port_init_devs -> ->init_dev Change ->port_init_devs method to take 'ide_drive_t *' as an argument instead of 'ide_hwif_t *' and rename it to ->init_dev. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 6 +++--- drivers/ide/legacy/ht6560b.c | 8 ++++---- drivers/ide/legacy/ide-4drives.c | 10 ++++------ drivers/ide/legacy/qd65xx.c | 16 ++++++++-------- 4 files changed, 19 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 97dda05914a1..c5dc18849303 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1320,10 +1320,10 @@ static void ide_port_init_devices(ide_hwif_t *hwif) drive->unmask = 1; if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS) drive->no_unmask = 1; - } - if (port_ops && port_ops->port_init_devs) - port_ops->port_init_devs(hwif); + if (port_ops && port_ops->init_dev) + port_ops->init_dev(drive); + } } static void ide_init_port(ide_hwif_t *hwif, unsigned int port, diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c index bd2f579946fa..7bc8fd59ea9e 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c @@ -310,16 +310,16 @@ static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio) #endif } -static void __init ht6560b_port_init_devs(ide_hwif_t *hwif) +static void __init ht6560b_init_dev(ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; /* Setting default configurations for drives. */ int t = (HT_CONFIG_DEFAULT << 8) | HT_TIMING_DEFAULT; if (hwif->channel) t |= (HT_SECONDARY_IF << 8); - hwif->drives[0].drive_data = t; - hwif->drives[1].drive_data = t; + drive->drive_data = t; } static int probe_ht6560b; @@ -328,7 +328,7 @@ module_param_named(probe, probe_ht6560b, bool, 0); MODULE_PARM_DESC(probe, "probe for HT6560B chipset"); static const struct ide_port_ops ht6560b_port_ops = { - .port_init_devs = ht6560b_port_init_devs, + .init_dev = ht6560b_init_dev, .set_pio_mode = ht6560b_set_pio_mode, .selectproc = ht6560b_selectproc, }; diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/legacy/ide-4drives.c index 5cd6ce537eea..89c8ff0a4d08 100644 --- a/drivers/ide/legacy/ide-4drives.c +++ b/drivers/ide/legacy/ide-4drives.c @@ -11,16 +11,14 @@ static int probe_4drives; module_param_named(probe, probe_4drives, bool, 0); MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port"); -static void ide_4drives_port_init_devs(ide_hwif_t *hwif) +static void ide_4drives_init_dev(ide_drive_t *drive) { - if (hwif->channel) { - hwif->drives[0].select.all ^= 0x20; - hwif->drives[1].select.all ^= 0x20; - } + if (drive->hwif->channel) + drive->select.all ^= 0x20; } static const struct ide_port_ops ide_4drives_port_ops = { - .port_init_devs = ide_4drives_port_init_devs, + .init_dev = ide_4drives_init_dev, }; static const struct ide_port_info ide_4drives_port_info = { diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c index 63f6c31d16ea..2338f344ea24 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c @@ -282,17 +282,18 @@ static int __init qd_testreg(int port) return (readreg != QD_TESTVAL); } -static void __init qd6500_port_init_devs(ide_hwif_t *hwif) +static void __init qd6500_init_dev(ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; u8 base = (hwif->config_data & 0xff00) >> 8; u8 config = QD_CONFIG(hwif); - hwif->drives[0].drive_data = QD6500_DEF_DATA; - hwif->drives[1].drive_data = QD6500_DEF_DATA; + drive->drive_data = QD6500_DEF_DATA; } -static void __init qd6580_port_init_devs(ide_hwif_t *hwif) +static void __init qd6580_init_dev(ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; u16 t1, t2; u8 base = (hwif->config_data & 0xff00) >> 8; u8 config = QD_CONFIG(hwif); @@ -303,18 +304,17 @@ static void __init qd6580_port_init_devs(ide_hwif_t *hwif) } else t2 = t1 = hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA; - hwif->drives[0].drive_data = t1; - hwif->drives[1].drive_data = t2; + drive->drive_data = drive->select.b.unit ? t2 : t1; } static const struct ide_port_ops qd6500_port_ops = { - .port_init_devs = qd6500_port_init_devs, + .init_dev = qd6500_init_dev, .set_pio_mode = qd6500_set_pio_mode, .selectproc = qd65xx_select, }; static const struct ide_port_ops qd6580_port_ops = { - .port_init_devs = qd6580_port_init_devs, + .init_dev = qd6580_init_dev, .set_pio_mode = qd6580_set_pio_mode, .selectproc = qd65xx_select, }; -- cgit v1.2.2 From b48c89a9699f451e4e236fa7313461281c00e69b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:42 +0200 Subject: cmd640: add ->init_dev method Convert the driver to use ->init_dev method instead of open-coding devices init in cmd640x_init(). While at it: - fix printk()-s to use KERN_INFO level instead of the default KERN_ERR - use DRV_NAME define in printk()-s - set proper ->pio_mask also for CONFIG_BLK_DEV_CMD640_ENHANCED=n There should be no functional changes caused by this patch (except fixing printk()-s levels). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/cmd640.c | 72 ++++++++++++++++++++---------------------------- 1 file changed, 30 insertions(+), 42 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index ab7d7274d8b1..1ad1e23e3105 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -611,11 +611,40 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio) display_clocks(index); } +#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + +static void cmd640_init_dev(ide_drive_t *drive) +{ + unsigned int i = drive->hwif->channel * 2 + drive->select.b.unit; + +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + /* + * Reset timing to the slowest speed and turn off prefetch. + * This way, the drive identify code has a better chance. + */ + setup_counts[i] = 4; /* max possible */ + active_counts[i] = 16; /* max possible */ + recovery_counts[i] = 16; /* max possible */ + program_drive_counts(drive, i); + set_prefetch_mode(drive, i, 0); + printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch cleared\n", i); +#else + /* + * Set the drive unmask flags to match the prefetch setting. + */ + check_prefetch(drive, i); + printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch(%s) preserved\n", + i, drive->no_io_32bit ? "off" : "on"); +#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ +} + static const struct ide_port_ops cmd640_port_ops = { + .init_dev = cmd640_init_dev, +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED .set_pio_mode = cmd640_set_pio_mode, +#endif }; -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ static int pci_conf1(void) { @@ -658,10 +687,8 @@ static const struct ide_port_info cmd640_port_info __initdata = { IDE_HFLAG_NO_DMA | IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_ABUSE_FAST_DEVSEL, -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED .port_ops = &cmd640_port_ops, .pio_mask = ATA_PIO5, -#endif }; static int cmd640x_init_one(unsigned long base, unsigned long ctl) @@ -689,7 +716,6 @@ static int __init cmd640x_init(void) { int second_port_cmd640 = 0, rc; const char *bus_type, *port2; - unsigned int index; u8 b, cfr; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; hw_regs_t hw[2]; @@ -813,44 +839,6 @@ static int __init cmd640x_init(void) printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n", second_port_cmd640 ? "" : "not ", port2); - /* - * Establish initial timings/prefetch for all drives. - * Do not unnecessarily disturb any prior BIOS setup of these. - */ - for (index = 0; index < (2 + (second_port_cmd640 << 1)); index++) { - ide_drive_t *drive; - - if (index > 1) { - if (cmd_hwif1 == NULL) - continue; - drive = &cmd_hwif1->drives[index & 1]; - } else { - if (cmd_hwif0 == NULL) - continue; - drive = &cmd_hwif0->drives[index & 1]; - } - -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - /* - * Reset timing to the slowest speed and turn off prefetch. - * This way, the drive identify code has a better chance. - */ - setup_counts [index] = 4; /* max possible */ - active_counts [index] = 16; /* max possible */ - recovery_counts [index] = 16; /* max possible */ - program_drive_counts(drive, index); - set_prefetch_mode(drive, index, 0); - printk("cmd640: drive%d timings/prefetch cleared\n", index); -#else - /* - * Set the drive unmask flags to match the prefetch setting - */ - check_prefetch(drive, index); - printk("cmd640: drive%d timings/prefetch(%s) preserved\n", - index, drive->no_io_32bit ? "off" : "on"); -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ - } - #ifdef CMD640_DUMP_REGS cmd640_dump_regs(); #endif -- cgit v1.2.2 From 9a5ae1faaaf43933dee48c223b193d5e1c4b8b0c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:42 +0200 Subject: rapide: use struct ide_port_info Convert the driver to use struct ide_port_info. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/rapide.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c index 1747b2358775..bb081ad53f31 100644 --- a/drivers/ide/arm/rapide.c +++ b/drivers/ide/arm/rapide.c @@ -11,6 +11,10 @@ #include +static struct const ide_port_info rapide_port_info = { + .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, +}; + static void rapide_setup_ports(hw_regs_t *hw, void __iomem *base, void __iomem *ctrl, unsigned int sz, int irq) { @@ -53,12 +57,11 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id) ide_init_port_hw(hwif, &hw); - hwif->host_flags = IDE_HFLAG_MMIO; default_hwif_mmiops(hwif); idx[0] = hwif->index; - ide_device_add(idx, NULL); + ide_device_add(idx, &rapide_port_info); ecard_set_drvdata(ec, hwif); goto out; -- cgit v1.2.2 From f81eb80bbb949f9498980c785ef7dd4c994a4909 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:42 +0200 Subject: ide-h8300: use struct ide_port_info Convert the driver to use struct ide_port_info. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/h8300/ide-h8300.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index dfce105bae64..ff6a98afefb7 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -176,6 +176,10 @@ static inline void hwif_setup(ide_hwif_t *hwif) hwif->output_data = h8300_output_data; } +static const struct ide_port_info h8300_port_info = { + .host_flags = IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_NO_DMA, +}; + static int __init h8300_ide_init(void) { hw_regs_t hw; @@ -201,12 +205,11 @@ static int __init h8300_ide_init(void) index = hwif->index; ide_init_port_hw(hwif, &hw); hwif_setup(hwif); - hwif->host_flags = IDE_HFLAG_NO_IO_32BIT; printk(KERN_INFO "ide%d: H8/300 generic IDE interface\n", index); idx[0] = index; - ide_device_add(idx, NULL); + ide_device_add(idx, &h8300_port_info); return 0; -- cgit v1.2.2 From 7b60fa16ca50b0f8cb9d007faee0dff71b397fb8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:42 +0200 Subject: ide_platform: use struct ide_port_info Convert the driver to use struct ide_port_info. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/legacy/ide_platform.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c index d3bc3f24e05d..a249562b34b5 100644 --- a/drivers/ide/legacy/ide_platform.c +++ b/drivers/ide/legacy/ide_platform.c @@ -44,6 +44,10 @@ static void __devinit plat_ide_setup_ports(hw_regs_t *hw, hw->chipset = ide_generic; } +static const struct ide_port_info platform_ide_port_info = { + .host_flags = IDE_HFLAG_NO_DMA, +}; + static int __devinit plat_ide_probe(struct platform_device *pdev) { struct resource *res_base, *res_alt, *res_irq; @@ -54,6 +58,7 @@ static int __devinit plat_ide_probe(struct platform_device *pdev) int ret = 0; int mmio = 0; hw_regs_t hw; + struct ide_port_info d = platform_ide_port_info; pdata = pdev->dev.platform_data; @@ -102,13 +107,13 @@ static int __devinit plat_ide_probe(struct platform_device *pdev) ide_init_port_hw(hwif, &hw); if (mmio) { - hwif->host_flags = IDE_HFLAG_MMIO; + d.host_flags |= IDE_HFLAG_MMIO; default_hwif_mmiops(hwif); } idx[0] = hwif->index; - ide_device_add(idx, NULL); + ide_device_add(idx, &d); platform_set_drvdata(pdev, hwif); -- cgit v1.2.2 From eb3aff5530d22eb4be0a99c9d39c9ffde7b9891a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:42 +0200 Subject: ide: print message on error in ide_find_port_slot() * Add DRV_NAME define to ide-h8300.c. * Fix ide-h8300.c, swarm.c and sgiioc4.c to set .name field in struct ide_port_info to DRV_NAME, then convert these host drivers to use ide_find_port_slot() instead of ide_find_port(). * Print message on error in ide_find_port_slot(). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/h8300/ide-h8300.c | 8 ++++---- drivers/ide/ide-probe.c | 3 +++ drivers/ide/mips/swarm.c | 7 +++---- drivers/ide/pci/scc_pata.c | 7 ++----- drivers/ide/pci/sgiioc4.c | 8 +++----- drivers/ide/setup-pci.c | 5 +---- 6 files changed, 16 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index ff6a98afefb7..c445298f7eb8 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -8,6 +8,8 @@ #include #include +#define DRV_NAME "ide-h8300" + #define bswap(d) \ ({ \ u16 r; \ @@ -196,11 +198,9 @@ static int __init h8300_ide_init(void) hw_setup(&hw); - hwif = ide_find_port(); - if (hwif == NULL) { - printk(KERN_ERR "ide-h8300: IDE I/F register failed\n"); + hwif = ide_find_port_slot(&h8300_port_info); + if (hwif == NULL) return -ENOENT; - } index = hwif->index; ide_init_port_hw(hwif, &hw); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index c5dc18849303..235ebdb29b28 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1490,6 +1490,9 @@ ide_hwif_t *ide_find_port_slot(const struct ide_port_info *d) } } + printk(KERN_ERR "%s: no free slot for interface\n", + d ? d->name : "ide"); + return NULL; out_found: diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c index 57a0138d0db6..bae92acea343 100644 --- a/drivers/ide/mips/swarm.c +++ b/drivers/ide/mips/swarm.c @@ -62,6 +62,7 @@ static struct resource swarm_ide_resource = { static struct platform_device *swarm_ide_dev; static const struct ide_port_info swarm_port_info = { + .name = DRV_NAME, .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, }; @@ -81,11 +82,9 @@ static int __devinit swarm_ide_probe(struct device *dev) if (!SIBYTE_HAVE_IDE) return -ENODEV; - hwif = ide_find_port(); - if (hwif == NULL) { - printk(KERN_ERR DRV_NAME ": no free slot for interface\n"); + hwif = ide_find_port_slot(&swarm_port_info); + if (hwif == NULL) return -ENOMEM; - } base = ioremap(A_IO_EXT_BASE, 0x800); offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS)); diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 71bff3131b96..789c66dfbde5 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -558,12 +558,9 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev, u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; int i; - hwif = ide_find_port(); - if (hwif == NULL) { - printk(KERN_ERR "%s: too many IDE interfaces, " - "no room in table\n", SCC_PATA_NAME); + hwif = ide_find_port_slot(d); + if (hwif == NULL) return -ENOMEM; - } memset(&hw, 0, sizeof(hw)); for (i = 0; i <= 8; i++) diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index dd0d0f73ab16..be73acb2080d 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -568,6 +568,7 @@ static const struct ide_dma_ops sgiioc4_dma_ops = { }; static const struct ide_port_info sgiioc4_port_info __devinitdata = { + .name = DRV_NAME, .chipset = ide_pci, .init_dma = ide_dma_sgiioc4, .port_ops = &sgiioc4_port_ops, @@ -587,12 +588,9 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) hw_regs_t hw; struct ide_port_info d = sgiioc4_port_info; - hwif = ide_find_port(); - if (hwif == NULL) { - printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", - DRV_NAME); + hwif = ide_find_port_slot(&d); + if (hwif == NULL) return -ENOMEM; - } /* Get the CmdBlk and CtrlBlk Base Registers */ bar0 = pci_resource_start(dev, 0); diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 166211f53f17..4321d20fe874 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -332,11 +332,8 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, } hwif = ide_find_port_slot(d); - if (hwif == NULL) { - printk(KERN_ERR "%s: too many IDE interfaces, no room in " - "table\n", d->name); + if (hwif == NULL) return NULL; - } memset(&hw, 0, sizeof(hw)); hw.irq = irq; -- cgit v1.2.2 From 740c397cc64272917a4c4c283649579d2044a836 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:43 +0200 Subject: ide-h8300: print driver banner message early Print driver banner message early and without interface number. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/h8300/ide-h8300.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index c445298f7eb8..20fad6d542cc 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -189,6 +189,8 @@ static int __init h8300_ide_init(void) int index; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + printk(KERN_INFO DRV_NAME ": H8/300 generic IDE interface\n"); + if (!request_region(CONFIG_H8300_IDE_BASE, H8300_IDE_GAP*8, "ide-h8300")) goto out_busy; if (!request_region(CONFIG_H8300_IDE_ALT, H8300_IDE_GAP, "ide-h8300")) { @@ -205,7 +207,6 @@ static int __init h8300_ide_init(void) index = hwif->index; ide_init_port_hw(hwif, &hw); hwif_setup(hwif); - printk(KERN_INFO "ide%d: H8/300 generic IDE interface\n", index); idx[0] = index; -- cgit v1.2.2 From e193c3e141df4b536ed077b29c83a96768333607 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:43 +0200 Subject: ide-pnp: print driver banner message early Print driver banner message early and without interface number. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-pnp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index fc1e10c9d1cd..03f2ef5470a3 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -33,6 +33,8 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) ide_hwif_t *hwif; unsigned long base, ctl; + printk(KERN_INFO DRV_NAME ": generic PnP IDE interface\n"); + if (!(pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && pnp_irq_valid(dev, 0))) return -1; @@ -64,7 +66,6 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) ide_init_port_hw(hwif, &hw); - printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index); pnp_set_drvdata(dev, hwif); ide_device_add(idx, NULL); -- cgit v1.2.2 From 07fe69d5d0b6e476cecaf75e81c0c6093571087b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:43 +0200 Subject: ide: allow any command requesting DMA data phase for HDIO_DRIVE_TASKFILE Allow any command requesting DMA data phase for HDIO_DRIVE_TASKFILE ioctl and remove no longer needed task_dma_ok() Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-taskfile.c | 22 +--------------------- 1 file changed, 1 insertion(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index cf55a48a7dd2..994a5161c040 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -62,25 +62,6 @@ int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) return ide_raw_taskfile(drive, &args, buf, 1); } -static int inline task_dma_ok(ide_task_t *task) -{ - if (blk_fs_request(task->rq) || (task->tf_flags & IDE_TFLAG_FLAGGED)) - return 1; - - switch (task->tf.command) { - case WIN_WRITEDMA_ONCE: - case WIN_WRITEDMA: - case WIN_WRITEDMA_EXT: - case WIN_READDMA_ONCE: - case WIN_READDMA: - case WIN_READDMA_EXT: - case WIN_IDENTIFY_DMA: - return 1; - } - - return 0; -} - static ide_startstop_t task_no_data_intr(ide_drive_t *); static ide_startstop_t set_geometry_intr(ide_drive_t *); static ide_startstop_t recal_intr(ide_drive_t *); @@ -139,8 +120,7 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) WAIT_WORSTCASE, NULL); return ide_started; default: - if (task_dma_ok(task) == 0 || drive->using_dma == 0 || - dma_ops->dma_setup(drive)) + if (drive->using_dma == 0 || dma_ops->dma_setup(drive)) return ide_stopped; dma_ops->dma_exec_cmd(drive, tf->command); dma_ops->dma_start(drive); -- cgit v1.2.2 From 605cfe8270cb182f494575c5a608404bb19fdfc5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:43 +0200 Subject: ide: remove superfluous BUG_ON() from set_geometry_intr() ide_set_handler() bugs on ->handler == NULL so no need to do it in set_geometry_intr(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-taskfile.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 994a5161c040..0d0bf292c418 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -163,7 +163,6 @@ static ide_startstop_t set_geometry_intr(ide_drive_t *drive) if (stat & (ERR_STAT|DRQ_STAT)) return ide_error(drive, "set_geometry_intr", stat); - BUG_ON(HWGROUP(drive)->handler != NULL); ide_set_handler(drive, &set_geometry_intr, WAIT_WORSTCASE, NULL); return ide_started; } -- cgit v1.2.2 From 61729415e64a1149d4eb36c3fac26a28728ad1d7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:43 +0200 Subject: ide: remove needless includes from ide.c Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide.c | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 9240888e5efd..90ae00d4aaf5 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -50,29 +50,16 @@ #include #include #include -#include -#include #include #include #include #include -#include #include #include #include -#include #include #include -#include -#include -#include #include -#include - -#include -#include -#include -#include /* default maximum number of failures */ -- cgit v1.2.2 From ad15e9fc8913b704978ffdda7d1f31c79ed6814d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:44 +0200 Subject: ide: remove needless includes from ide-taskfile.c (take 2) v2: On Sunday 15 June 2008, Geert Uytterhoeven wrote: > As ide-taskfile.c uses scatterlists, it should include . (v1 broke IDE build on m68k, thanks to Geert for finding the bug) Cc: Geert Uytterhoeven Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-taskfile.c | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 0d0bf292c418..1fbdb746dc88 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -8,28 +8,18 @@ * The big the bad and the ugly. */ -#include #include #include #include -#include -#include #include #include -#include #include -#include -#include #include -#include #include #include #include -#include #include -#include -#include #include #include -- cgit v1.2.2 From ff23712e791fd80f3b088d5e1c5733c0944cfe64 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:44 +0200 Subject: ide: remove needless includes from setup-pci.c (take 2) v2: * sparc build fix. (From Stephen Rothwell) Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/setup-pci.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 4321d20fe874..65fc08b6b6d0 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -6,19 +6,15 @@ * May be copied or modified under the terms of the GNU General Public License */ -#include #include #include #include #include -#include -#include #include #include #include #include -#include /** * ide_setup_pci_baseregs - place a PCI IDE controller native -- cgit v1.2.2 From 47bc7e7425d198ad1f8c4597b0bf28619fcce0fd Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:44 +0200 Subject: rapide: fix rapide_probe() return value Return -ENOENT on ide_find_port() failure. While at it: - Cleanup rapide_probe() a bit. Cc: Russell King Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/rapide.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c index bb081ad53f31..43057e0303c8 100644 --- a/drivers/ide/arm/rapide.c +++ b/drivers/ide/arm/rapide.c @@ -48,24 +48,26 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id) goto release; } - hwif = ide_find_port(); - if (hwif) { - memset(&hw, 0, sizeof(hw)); - rapide_setup_ports(&hw, base, base + 0x818, 1 << 6, ec->irq); - hw.chipset = ide_generic; - hw.dev = &ec->dev; + memset(&hw, 0, sizeof(hw)); + rapide_setup_ports(&hw, base, base + 0x818, 1 << 6, ec->irq); + hw.chipset = ide_generic; + hw.dev = &ec->dev; - ide_init_port_hw(hwif, &hw); + hwif = ide_find_port(); + if (hwif == NULL) { + ret = -ENOENT; + goto release; + } - default_hwif_mmiops(hwif); + ide_init_port_hw(hwif, &hw); + default_hwif_mmiops(hwif); - idx[0] = hwif->index; + idx[0] = hwif->index; - ide_device_add(idx, &rapide_port_info); + ide_device_add(idx, &rapide_port_info); - ecard_set_drvdata(ec, hwif); - goto out; - } + ecard_set_drvdata(ec, hwif); + goto out; release: ecard_release_resources(ec); -- cgit v1.2.2 From 67717e224181527987cce800fa2ddb5c8c1e9315 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:44 +0200 Subject: icside: always try to probe first interface Try to probe first interface even if ide_hwifs[]'s slot for the second interface cannot be obtained. While at it: - Add DRV_NAME define and use it for request_dma() instead of hwif->name. Cc: Russell King Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/icside.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index c8d860060329..52f58c885783 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -21,6 +21,8 @@ #include #include +#define DRV_NAME "icside" + #define ICS_IDENT_OFFSET 0x2280 #define ICS_ARCIN_V5_INTRSTAT 0x0000 @@ -546,27 +548,27 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) ide_init_port_hw(hwif, &hw[0]); default_hwif_mmiops(hwif); + idx[0] = hwif->index; + mate = ide_find_port(); - if (mate == NULL) - return -ENODEV; + if (mate) { + ide_init_port_hw(mate, &hw[1]); + default_hwif_mmiops(mate); - ide_init_port_hw(mate, &hw[1]); - default_hwif_mmiops(mate); + idx[1] = mate->index; + } state->hwif[0] = hwif; state->hwif[1] = mate; ecard_set_drvdata(ec, state); - if (ec->dma != NO_DMA && !request_dma(ec->dma, hwif->name)) { + if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) { d.init_dma = icside_dma_init; d.port_ops = &icside_v6_port_ops; d.dma_ops = NULL; } - idx[0] = hwif->index; - idx[1] = mate->index; - ide_device_add(idx, &d); return 0; -- cgit v1.2.2 From cb8ea0929c9cb899d61c4e155aace0b34d8cffe3 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:44 +0200 Subject: swarm: call ide_find_port_slot() later Move ide_find_port_slot() call closer to ide_device_add(). This is basically a preparation for the future changes. Cc: Maciej W. Rozycki Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/mips/swarm.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c index bae92acea343..9f1212cc4aed 100644 --- a/drivers/ide/mips/swarm.c +++ b/drivers/ide/mips/swarm.c @@ -82,10 +82,6 @@ static int __devinit swarm_ide_probe(struct device *dev) if (!SIBYTE_HAVE_IDE) return -ENODEV; - hwif = ide_find_port_slot(&swarm_port_info); - if (hwif == NULL) - return -ENOMEM; - base = ioremap(A_IO_EXT_BASE, 0x800); offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS)); size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS)); @@ -112,9 +108,6 @@ static int __devinit swarm_ide_probe(struct device *dev) base = ioremap(offset, size); - /* Setup MMIO ops. */ - default_hwif_mmiops(hwif); - for (i = 0; i <= 7; i++) hw.io_ports_array[i] = (unsigned long)(base + ((0x1f0 + i) << 5)); @@ -123,8 +116,15 @@ static int __devinit swarm_ide_probe(struct device *dev) hw.irq = K_INT_GB_IDE; hw.chipset = ide_generic; + hwif = ide_find_port_slot(&swarm_port_info); + if (hwif == NULL) + goto err; + ide_init_port_hw(hwif, &hw); + /* Setup MMIO ops. */ + default_hwif_mmiops(hwif); + idx[0] = hwif->index; ide_device_add(idx, &swarm_port_info); @@ -132,6 +132,10 @@ static int __devinit swarm_ide_probe(struct device *dev) dev_set_drvdata(dev, hwif); return 0; +err: + release_resource(&swarm_ide_resource); + iounmap(base); + return -ENOMEM; } static struct device_driver swarm_ide_driver = { -- cgit v1.2.2 From ce30e4015954e281f682aa8d158a47885d8e1262 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:44 +0200 Subject: sgiioc4: call ide_find_port_slot() later Move ide_find_port_slot() call closer to ide_device_add(). This is basically a preparation for the future changes. Cc: Jeremy Higdon Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/sgiioc4.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index be73acb2080d..c79ff5b41088 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -588,10 +588,6 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) hw_regs_t hw; struct ide_port_info d = sgiioc4_port_info; - hwif = ide_find_port_slot(&d); - if (hwif == NULL) - return -ENOMEM; - /* Get the CmdBlk and CtrlBlk Base Registers */ bar0 = pci_resource_start(dev, 0); virt_base = ioremap(bar0, pci_resource_len(dev, 0)); @@ -621,6 +617,11 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) hw.irq = dev->irq; hw.chipset = ide_pci; hw.dev = &dev->dev; + + hwif = ide_find_port_slot(&d); + if (hwif == NULL) + goto err; + ide_init_port_hw(hwif, &hw); /* The IOC4 uses MMIO rather than Port IO. */ @@ -637,6 +638,10 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) return -EIO; return 0; +err: + release_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE); + iounmap(virt_base); + return -ENOMEM; } static unsigned int __devinit -- cgit v1.2.2 From af6765ce9f535f20e6f9975269660fe49594745a Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:45 +0200 Subject: ide-cd: remove wait-for-idle-controller bit in cdrom_start_packet_command This is done in the request issue path anyway. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index e12d60278210..eb4b27548caf 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -517,14 +517,9 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, int xferlen, ide_handler_t *handler) { - ide_startstop_t startstop; struct cdrom_info *info = drive->driver_data; ide_hwif_t *hwif = drive->hwif; - /* wait for the controller to be idle */ - if (ide_wait_stat(&startstop, drive, 0, BUSY_STAT, WAIT_READY)) - return startstop; - /* FIXME: for Virtual DMA we must check harder */ if (info->dma) info->dma = !hwif->dma_ops->dma_setup(drive); -- cgit v1.2.2 From ae8789f034ffa077105575817ec0cc581fd18d83 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:45 +0200 Subject: ide-cd: remove ide_cd_drain_data and ide_cd_pad_transfer Use the generic ide_pad_transfer() helper instead. [bart: fixup ide_cd_drain_data() -> ide_pad_transfer() conversion] Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 33 ++++----------------------------- 1 file changed, 4 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index eb4b27548caf..789b19cf5e55 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -598,28 +598,6 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive, return ide_started; } -/* - * Block read functions. - */ -static void ide_cd_pad_transfer(ide_drive_t *drive, xfer_func_t *xf, int len) -{ - while (len > 0) { - int dum = 0; - xf(drive, NULL, &dum, sizeof(dum)); - len -= sizeof(dum); - } -} - -static void ide_cd_drain_data(ide_drive_t *drive, int nsects) -{ - while (nsects > 0) { - static char dum[SECTOR_SIZE]; - - drive->hwif->input_data(drive, NULL, dum, sizeof(dum)); - nsects--; - } -} - /* * Check the contents of the interrupt reason register from the cdrom * and attempt to recover if there are problems. Returns 0 if everything's @@ -635,15 +613,12 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq, if (ireason == (!rw << 1)) return 0; else if (ireason == (rw << 1)) { - ide_hwif_t *hwif = drive->hwif; - xfer_func_t *xf; /* whoops... */ printk(KERN_ERR "%s: %s: wrong transfer direction!\n", drive->name, __func__); - xf = rw ? hwif->output_data : hwif->input_data; - ide_cd_pad_transfer(drive, xf, len); + ide_pad_transfer(drive, rw, len); } else if (rw == 0 && ireason == 1) { /* * Some drives (ASUS) seem to tell us that status info is @@ -1006,7 +981,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) - bio_cur_sectors(rq->bio), thislen >> 9); if (nskip > 0) { - ide_cd_drain_data(drive, nskip); + ide_pad_transfer(drive, write, nskip << 9); rq->current_nr_sectors -= nskip; thislen -= (nskip << 9); } @@ -1043,7 +1018,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) * If the buffers are full, pipe the rest into * oblivion. */ - ide_cd_drain_data(drive, thislen >> 9); + ide_pad_transfer(drive, 0, thislen); else { printk(KERN_ERR "%s: confused, missing data\n", drive->name); @@ -1091,7 +1066,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) /* pad, if necessary */ if (!blk_fs_request(rq) && len > 0) - ide_cd_pad_transfer(drive, xferfunc, len); + ide_pad_transfer(drive, write, len); if (blk_pc_request(rq)) { timeout = rq->timeout; -- cgit v1.2.2 From ab9d6e3374d938cf3d941fbed5ba32a19ad263b8 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:45 +0200 Subject: ide-cd: ide_do_rw_cdrom: add the catch-all bad request case to the if-else block There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 789b19cf5e55..6ade498cd2fe 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1235,11 +1235,11 @@ static ide_startstop_t ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, /* right now this can only be a reset... */ cdrom_end_request(drive, 1); return ide_stopped; + } else { + blk_dump_rq_flags(rq, "ide-cd bad flags"); + cdrom_end_request(drive, 0); + return ide_stopped; } - - blk_dump_rq_flags(rq, "ide-cd bad flags"); - cdrom_end_request(drive, 0); - return ide_stopped; } -- cgit v1.2.2 From 8ea1d17b962c35401fe26428e25c4652023e2652 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:45 +0200 Subject: ide-cd: cdrom_start_seek: remove unused argument block There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 6ade498cd2fe..ff98222ece01 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -753,7 +753,7 @@ static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive) return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr); } -static ide_startstop_t cdrom_start_seek(ide_drive_t *drive, unsigned int block) +static ide_startstop_t cdrom_start_seek(ide_drive_t *drive) { struct cdrom_info *info = drive->driver_data; @@ -1223,7 +1223,7 @@ static ide_startstop_t ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, IDE_LARGE_SEEK(info->last_block, block, IDECD_SEEK_THRESHOLD) && drive->dsc_overlap) - action = cdrom_start_seek(drive, block); + action = cdrom_start_seek(drive); else action = cdrom_start_rw(drive, rq); info->last_block = block; -- cgit v1.2.2 From 99384aeafe3a78d8a2e66b09b67aa6a219cd7897 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:45 +0200 Subject: ide-cd: mv ide_do_rw_cdrom ide_cd_do_request There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index ff98222ece01..a9be4bf87dd5 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1197,7 +1197,7 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) /* * cdrom driver request routine. */ -static ide_startstop_t ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, +static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, sector_t block) { ide_startstop_t action; @@ -1936,7 +1936,7 @@ static ide_driver_t ide_cdrom_driver = { .version = IDECD_VERSION, .media = ide_cdrom, .supports_dsc_overlap = 1, - .do_request = ide_do_rw_cdrom, + .do_request = ide_cd_do_request, .end_request = ide_end_request, .error = __ide_error, .abort = __ide_abort, -- cgit v1.2.2 From b6ca440a8ff15e12478ea6f026a52970e7a0c54c Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:46 +0200 Subject: ide-cd: simplify request issuing path Call cdrom_start_packet_command() only from the ->do_request() routine. As a nice side effect, this improves code readability a bit. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 39 +++++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index a9be4bf87dd5..b61ce5ee08e2 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -753,14 +753,12 @@ static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive) return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr); } -static ide_startstop_t cdrom_start_seek(ide_drive_t *drive) +static void cdrom_start_seek(ide_drive_t *drive) { struct cdrom_info *info = drive->driver_data; info->dma = 0; info->start_seek = jiffies; - return cdrom_start_packet_command(drive, 0, - cdrom_start_seek_continuation); } /* @@ -1135,8 +1133,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) if (write) cd->devinfo.media_written = 1; - /* start sending the read/write request to the drive */ - return cdrom_start_packet_command(drive, 32768, cdrom_start_rw_cont); + return ide_started; } static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive) @@ -1149,7 +1146,7 @@ static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive) return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr); } -static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) +static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) { struct cdrom_info *info = drive->driver_data; @@ -1188,10 +1185,6 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) ((unsigned long)current->stack & stack_mask))) info->dma = 0; } - - /* start sending the command to the drive */ - return cdrom_start_packet_command(drive, rq->data_len, - cdrom_do_newpc_cont); } /* @@ -1200,8 +1193,9 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, sector_t block) { - ide_startstop_t action; struct cdrom_info *info = drive->driver_data; + ide_handler_t *fn; + int xferlen; if (blk_fs_request(rq)) { if (info->cd_flags & IDE_CD_FLAG_SEEKING) { @@ -1221,16 +1215,23 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, } if (rq_data_dir(rq) == READ && IDE_LARGE_SEEK(info->last_block, block, - IDECD_SEEK_THRESHOLD) && - drive->dsc_overlap) - action = cdrom_start_seek(drive); - else - action = cdrom_start_rw(drive, rq); + IDECD_SEEK_THRESHOLD) && + drive->dsc_overlap) { + xferlen = 0; + fn = cdrom_start_seek_continuation; + cdrom_start_seek(drive); + } else { + xferlen = 32768; + fn = cdrom_start_rw_cont; + if (cdrom_start_rw(drive, rq) == ide_stopped) + return ide_stopped; + } info->last_block = block; - return action; } else if (blk_sense_request(rq) || blk_pc_request(rq) || rq->cmd_type == REQ_TYPE_ATA_PC) { - return cdrom_do_block_pc(drive, rq); + xferlen = rq->data_len; + fn = cdrom_do_newpc_cont; + cdrom_do_block_pc(drive, rq); } else if (blk_special_request(rq)) { /* right now this can only be a reset... */ cdrom_end_request(drive, 1); @@ -1240,6 +1241,8 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, cdrom_end_request(drive, 0); return ide_stopped; } + + return cdrom_start_packet_command(drive, xferlen, fn); } -- cgit v1.2.2 From 4b01fcbbe69bba34a8494fca6376ac0804f0f51d Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:46 +0200 Subject: ide-cd: fold cdrom_start_seek into ide_cd_do_request Do what the compiler does anyway: inline a function that is used only once. This saves us the overhead of a function call and the function is small enough to be embedded in the callsite anyways. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index b61ce5ee08e2..66d82c1b16eb 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -753,14 +753,6 @@ static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive) return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr); } -static void cdrom_start_seek(ide_drive_t *drive) -{ - struct cdrom_info *info = drive->driver_data; - - info->dma = 0; - info->start_seek = jiffies; -} - /* * Fix up a possibly partially-processed request so that we can start it over * entirely, or even put it back on the request queue. @@ -1219,7 +1211,8 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, drive->dsc_overlap) { xferlen = 0; fn = cdrom_start_seek_continuation; - cdrom_start_seek(drive); + info->dma = 0; + info->start_seek = jiffies; } else { xferlen = 32768; fn = cdrom_start_rw_cont; -- cgit v1.2.2 From e529c6087a845e64a6a36a2d17b8754b20bc7c0d Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:46 +0200 Subject: ide-cd: move request prep from cdrom_start_seek_continuation to rq issue path ... by factoring out the rq preparation code into a separate function called in the request routine. As a nice side effect, this minimizes the IRQ handler execution time. There should be no functionality change resulting from this patch. [bart: s/HWGROUP()/drive->hwif->hwgroup/ and remove extra newlines] Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 66d82c1b16eb..275d5ba12027 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -738,9 +738,8 @@ static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive) return ide_stopped; } -static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive) +static void ide_cd_prepare_seek_request(ide_drive_t *drive, struct request *rq) { - struct request *rq = HWGROUP(drive)->rq; sector_t frame = rq->sector; sector_div(frame, queue_hardsect_size(drive->queue) >> SECTOR_BITS); @@ -750,6 +749,12 @@ static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive) put_unaligned(cpu_to_be32(frame), (unsigned int *) &rq->cmd[2]); rq->timeout = ATAPI_WAIT_PC; +} + +static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive) +{ + struct request *rq = drive->hwif->hwgroup->rq; + return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr); } @@ -1211,8 +1216,11 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, drive->dsc_overlap) { xferlen = 0; fn = cdrom_start_seek_continuation; + info->dma = 0; info->start_seek = jiffies; + + ide_cd_prepare_seek_request(drive, rq); } else { xferlen = 32768; fn = cdrom_start_rw_cont; -- cgit v1.2.2 From 90eb808e0fd3cbda8a8b085238930c533f603642 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:46 +0200 Subject: ide-cd: move request prep from cdrom_start_rw_cont to rq issue path ... by factoring out the rq preparation code into a separate function called in the request routine. As a nice side effect, this minimizes the IRQ handler execution time. There should be no functionality change resulting from this patch. [bart: s/HWGROUP()/drive->hwif->hwgroup/ and remove extra newline] Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 275d5ba12027..9e593cebc00c 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -666,16 +666,9 @@ static int ide_cd_check_transfer_size(ide_drive_t *drive, int len) static ide_startstop_t cdrom_newpc_intr(ide_drive_t *); -/* - * Routine to send a read/write packet command to the drive. This is usually - * called directly from cdrom_start_{read,write}(). However, for drq_interrupt - * devices, it is called from an interrupt when the drive is ready to accept - * the command. - */ -static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) +static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive, + struct request *rq) { - struct request *rq = HWGROUP(drive)->rq; - if (rq_data_dir(rq) == READ) { unsigned short sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS; @@ -712,6 +705,19 @@ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) /* set up the command */ rq->timeout = ATAPI_WAIT_PC; + return ide_started; +} + +/* + * Routine to send a read/write packet command to the drive. This is usually + * called directly from cdrom_start_{read,write}(). However, for drq_interrupt + * devices, it is called from an interrupt when the drive is ready to accept + * the command. + */ +static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) +{ + struct request *rq = drive->hwif->hwgroup->rq; + /* send the command to the drive and return */ return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr); } @@ -1224,8 +1230,12 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, } else { xferlen = 32768; fn = cdrom_start_rw_cont; + if (cdrom_start_rw(drive, rq) == ide_stopped) return ide_stopped; + + if (ide_cd_prepare_rw_request(drive, rq) == ide_stopped) + return ide_stopped; } info->last_block = block; } else if (blk_sense_request(rq) || blk_pc_request(rq) || -- cgit v1.2.2 From 7fcebda501681080a242733b8db3f09f5ccb5d3f Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:46 +0200 Subject: ide-cd: move request prep chunk from cdrom_do_newpc_cont to rq issue path As a nice side effect, this minimizes the IRQ handler execution time. There should be no functionality change resulting from this patch. [bart: remove extra newlines from ide_cd_do_request()] Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 9e593cebc00c..2b3c69d1f53f 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1143,9 +1143,6 @@ static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive) { struct request *rq = HWGROUP(drive)->rq; - if (!rq->timeout) - rq->timeout = ATAPI_WAIT_PC; - return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr); } @@ -1242,6 +1239,10 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, rq->cmd_type == REQ_TYPE_ATA_PC) { xferlen = rq->data_len; fn = cdrom_do_newpc_cont; + + if (!rq->timeout) + rq->timeout = ATAPI_WAIT_PC; + cdrom_do_block_pc(drive, rq); } else if (blk_special_request(rq)) { /* right now this can only be a reset... */ @@ -1256,8 +1257,6 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, return cdrom_start_packet_command(drive, xferlen, fn); } - - /* * Ioctl handling. * -- cgit v1.2.2 From c96a7df8dba5800c03b0f1edd87b2f3d0473a119 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:46 +0200 Subject: ide-floppy: fold idefloppy_create_test_unit_ready_cmd into idefloppy_open There's no need for this function since it is used only once. [bart: ported it over IDE changes] Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index b3689437269f..df19ede73884 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -561,12 +561,6 @@ static void idefloppy_create_start_stop_cmd(struct ide_atapi_pc *pc, int start) pc->c[4] = start; } -static void idefloppy_create_test_unit_ready_cmd(struct ide_atapi_pc *pc) -{ - idefloppy_init_pc(pc); - pc->c[0] = GPCMD_TEST_UNIT_READY; -} - static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, struct ide_atapi_pc *pc, struct request *rq, unsigned long sector) @@ -1166,7 +1160,9 @@ static int idefloppy_open(struct inode *inode, struct file *filp) floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS; /* Just in case */ - idefloppy_create_test_unit_ready_cmd(&pc); + idefloppy_init_pc(&pc); + pc.c[0] = GPCMD_TEST_UNIT_READY; + if (idefloppy_queue_pc_tail(drive, &pc)) { idefloppy_create_start_stop_cmd(&pc, 1); (void) idefloppy_queue_pc_tail(drive, &pc); -- cgit v1.2.2 From 68dc3575e064a5655cbd656fbf32d6ceeb85ac9e Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:47 +0200 Subject: ide-floppy: zero out the whole struct ide_atapi_pc on init This is a precaution just to make sure a new pc is clean when allocated. There should be no functional change introduced by this patch. [bart: ported it over IDE changes] Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index df19ede73884..00948c39822b 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -351,10 +351,7 @@ static void ide_floppy_callback(ide_drive_t *drive) static void idefloppy_init_pc(struct ide_atapi_pc *pc) { - memset(pc->c, 0, 12); - pc->retries = 0; - pc->flags = 0; - pc->req_xfer = 0; + memset(pc, 0, sizeof(*pc)); pc->buf = pc->pc_buf; pc->buf_size = IDEFLOPPY_PC_BUFFER_SIZE; pc->callback = ide_floppy_callback; -- cgit v1.2.2 From 85ae98a3dff2da860a4f8f9e4a0de69ad82ce633 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 16 Jul 2008 20:33:47 +0200 Subject: ide: endian annotations in ide-floppy.c Signed-off-by: Harvey Harrison Cc: Al Viro Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 00948c39822b..c7e4433fcbcf 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -702,10 +702,10 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive) set_disk_ro(floppy->disk, floppy->wp); page = &pc.buf[8]; - transfer_rate = be16_to_cpu(*(u16 *)&pc.buf[8 + 2]); - sector_size = be16_to_cpu(*(u16 *)&pc.buf[8 + 6]); - cyls = be16_to_cpu(*(u16 *)&pc.buf[8 + 8]); - rpm = be16_to_cpu(*(u16 *)&pc.buf[8 + 28]); + transfer_rate = be16_to_cpup((__be16 *)&pc.buf[8 + 2]); + sector_size = be16_to_cpup((__be16 *)&pc.buf[8 + 6]); + cyls = be16_to_cpup((__be16 *)&pc.buf[8 + 8]); + rpm = be16_to_cpup((__be16 *)&pc.buf[8 + 28]); heads = pc.buf[8 + 4]; sectors = pc.buf[8 + 5]; @@ -780,8 +780,8 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) for (i = 0; i < desc_cnt; i++) { unsigned int desc_start = 4 + i*8; - blocks = be32_to_cpu(*(u32 *)&pc.buf[desc_start]); - length = be16_to_cpu(*(u16 *)&pc.buf[desc_start + 6]); + blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]); + length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]); debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n", i, blocks * length / 1024, blocks, length); @@ -902,8 +902,8 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg) if (u_index >= u_array_size) break; /* User-supplied buffer too small */ - blocks = be32_to_cpu(*(u32 *)&pc.buf[desc_start]); - length = be16_to_cpu(*(u16 *)&pc.buf[desc_start + 6]); + blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]); + length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]); if (put_user(blocks, argp)) return(-EFAULT); -- cgit v1.2.2 From ffa793f9bb5b563edb4cacc43a4d6677eec0e36b Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 16 Jul 2008 20:33:47 +0200 Subject: remove BLK_DEV_HD_ONLY After commit 80aa31cb460d12c1e02327b43eceb3eebc6e7090 (ide: remove CONFIG_BLK_DEV_HD_IDE config option (take 2)) the indirection through BLK_DEV_HD_ONLY is no longer required. Signed-off-by: Adrian Bunk Cc: rmk@arm.linux.org.uk Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 21511d47d926..39b95f9c2ad1 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -1000,7 +1000,7 @@ config BLK_DEV_IDEDMA endif -config BLK_DEV_HD_ONLY +config BLK_DEV_HD bool "Old hard disk (MFM/RLL/IDE) driver" depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN help @@ -1023,7 +1023,4 @@ config BLK_DEV_HD_ONLY Disk-HOWTO, available from . -config BLK_DEV_HD - def_bool BLK_DEV_HD_ONLY - endif # IDE -- cgit v1.2.2 From 01c22bfc30a3f40fed08cfd2779348edcb6c5e53 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 16 Jul 2008 20:33:47 +0200 Subject: ide/legacy/hd.c: use late_initcall() Since the later move to drivers/block/ will break the link order, the module_init() has to become a late_initcall(). Signed-off-by: Adrian Bunk Cc: rmk@arm.linux.org.uk Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Makefile | 1 - drivers/ide/legacy/hd.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index 8605536ea18f..39e99ace5cd3 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -62,7 +62,6 @@ endif obj-$(CONFIG_BLK_DEV_IDE) += arm/ mips/ -# old hd driver must be last ifeq ($(CONFIG_BLK_DEV_HD), y) hd-core-y += legacy/hd.o obj-y += hd-core.o diff --git a/drivers/ide/legacy/hd.c b/drivers/ide/legacy/hd.c index abdedf56643e..00b695652b2a 100644 --- a/drivers/ide/legacy/hd.c +++ b/drivers/ide/legacy/hd.c @@ -812,4 +812,4 @@ static int __init parse_hd_setup(char *line) } __setup("hd=", parse_hd_setup); -module_init(hd_init); +late_initcall(hd_init); -- cgit v1.2.2 From 453ea3ed0b3e8ad67d4ee9d2fccf3d95a3e1f709 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 16 Jul 2008 20:33:47 +0200 Subject: move ide/legacy/hd.c to drivers/block/ This patch moves hd.c to drivers/block/ Signed-off-by: Adrian Bunk Cc: rmk@arm.linux.org.uk Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/block/Kconfig | 24 ++ drivers/block/Makefile | 1 + drivers/block/hd.c | 815 ++++++++++++++++++++++++++++++++++++++++++++++++ drivers/ide/Kconfig | 23 -- drivers/ide/Makefile | 5 - drivers/ide/legacy/hd.c | 815 ------------------------------------------------ 6 files changed, 840 insertions(+), 843 deletions(-) create mode 100644 drivers/block/hd.c delete mode 100644 drivers/ide/legacy/hd.c (limited to 'drivers') diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 0d1d2133d9bc..c3909743c484 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -433,4 +433,28 @@ config VIRTIO_BLK This is the virtual block driver for virtio. It can be used with lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. +config BLK_DEV_HD + bool "Old hard disk (MFM/RLL/IDE) driver" + depends on HAVE_IDE + depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN + help + There are two drivers for MFM/RLL/IDE hard disks. Most people use + the newer enhanced driver, but this old one is still around for two + reasons. Some older systems have strange timing problems and seem to + work only with the old driver (which itself does not work with some + newer systems). The other reason is that the old driver is smaller, + since it lacks the enhanced functionality of the new one. This makes + it a good choice for systems with very tight memory restrictions, or + for systems with only older MFM/RLL/ESDI drives. Choosing the old + driver can save 13 KB or so of kernel memory. + + If you want to use this driver together with the new one you have + to use "hda=noprobe hdb=noprobe" kernel parameters to prevent the new + driver from probing the primary interface. + + If you are unsure, then just choose the Enhanced IDE/MFM/RLL driver + instead of this one. For more detailed information, read the + Disk-HOWTO, available from + . + endif # BLK_DEV diff --git a/drivers/block/Makefile b/drivers/block/Makefile index 5e584306be99..204332b29578 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -29,5 +29,6 @@ obj-$(CONFIG_VIRTIO_BLK) += virtio_blk.o obj-$(CONFIG_VIODASD) += viodasd.o obj-$(CONFIG_BLK_DEV_SX8) += sx8.o obj-$(CONFIG_BLK_DEV_UB) += ub.o +obj-$(CONFIG_BLK_DEV_HD) += hd.o obj-$(CONFIG_XEN_BLKDEV_FRONTEND) += xen-blkfront.o diff --git a/drivers/block/hd.c b/drivers/block/hd.c new file mode 100644 index 000000000000..00b695652b2a --- /dev/null +++ b/drivers/block/hd.c @@ -0,0 +1,815 @@ +/* + * Copyright (C) 1991, 1992 Linus Torvalds + * + * This is the low-level hd interrupt support. It traverses the + * request-list, using interrupts to jump between functions. As + * all the functions are called within interrupts, we may not + * sleep. Special care is recommended. + * + * modified by Drew Eckhardt to check nr of hd's from the CMOS. + * + * Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug + * in the early extended-partition checks and added DM partitions + * + * IRQ-unmask, drive-id, multiple-mode, support for ">16 heads", + * and general streamlining by Mark Lord. + * + * Removed 99% of above. Use Mark's ide driver for those options. + * This is now a lightweight ST-506 driver. (Paul Gortmaker) + * + * Modified 1995 Russell King for ARM processor. + * + * Bugfix: max_sectors must be <= 255 or the wheels tend to come + * off in a hurry once you queue things up - Paul G. 02/2001 + */ + +/* Uncomment the following if you want verbose error reports. */ +/* #define VERBOSE_ERRORS */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* CMOS defines */ +#include +#include +#include + +#define REALLY_SLOW_IO +#include +#include +#include + +#ifdef __arm__ +#undef HD_IRQ +#endif +#include +#ifdef __arm__ +#define HD_IRQ IRQ_HARDDISK +#endif + +/* Hd controller regster ports */ + +#define HD_DATA 0x1f0 /* _CTL when writing */ +#define HD_ERROR 0x1f1 /* see err-bits */ +#define HD_NSECTOR 0x1f2 /* nr of sectors to read/write */ +#define HD_SECTOR 0x1f3 /* starting sector */ +#define HD_LCYL 0x1f4 /* starting cylinder */ +#define HD_HCYL 0x1f5 /* high byte of starting cyl */ +#define HD_CURRENT 0x1f6 /* 101dhhhh , d=drive, hhhh=head */ +#define HD_STATUS 0x1f7 /* see status-bits */ +#define HD_FEATURE HD_ERROR /* same io address, read=error, write=feature */ +#define HD_PRECOMP HD_FEATURE /* obsolete use of this port - predates IDE */ +#define HD_COMMAND HD_STATUS /* same io address, read=status, write=cmd */ + +#define HD_CMD 0x3f6 /* used for resets */ +#define HD_ALTSTATUS 0x3f6 /* same as HD_STATUS but doesn't clear irq */ + +/* Bits of HD_STATUS */ +#define ERR_STAT 0x01 +#define INDEX_STAT 0x02 +#define ECC_STAT 0x04 /* Corrected error */ +#define DRQ_STAT 0x08 +#define SEEK_STAT 0x10 +#define SERVICE_STAT SEEK_STAT +#define WRERR_STAT 0x20 +#define READY_STAT 0x40 +#define BUSY_STAT 0x80 + +/* Bits for HD_ERROR */ +#define MARK_ERR 0x01 /* Bad address mark */ +#define TRK0_ERR 0x02 /* couldn't find track 0 */ +#define ABRT_ERR 0x04 /* Command aborted */ +#define MCR_ERR 0x08 /* media change request */ +#define ID_ERR 0x10 /* ID field not found */ +#define MC_ERR 0x20 /* media changed */ +#define ECC_ERR 0x40 /* Uncorrectable ECC error */ +#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */ +#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */ + +static DEFINE_SPINLOCK(hd_lock); +static struct request_queue *hd_queue; + +#define MAJOR_NR HD_MAJOR +#define QUEUE (hd_queue) +#define CURRENT elv_next_request(hd_queue) + +#define TIMEOUT_VALUE (6*HZ) +#define HD_DELAY 0 + +#define MAX_ERRORS 16 /* Max read/write errors/sector */ +#define RESET_FREQ 8 /* Reset controller every 8th retry */ +#define RECAL_FREQ 4 /* Recalibrate every 4th retry */ +#define MAX_HD 2 + +#define STAT_OK (READY_STAT|SEEK_STAT) +#define OK_STATUS(s) (((s)&(STAT_OK|(BUSY_STAT|WRERR_STAT|ERR_STAT)))==STAT_OK) + +static void recal_intr(void); +static void bad_rw_intr(void); + +static int reset; +static int hd_error; + +/* + * This struct defines the HD's and their types. + */ +struct hd_i_struct { + unsigned int head, sect, cyl, wpcom, lzone, ctl; + int unit; + int recalibrate; + int special_op; +}; + +#ifdef HD_TYPE +static struct hd_i_struct hd_info[] = { HD_TYPE }; +static int NR_HD = ARRAY_SIZE(hd_info); +#else +static struct hd_i_struct hd_info[MAX_HD]; +static int NR_HD; +#endif + +static struct gendisk *hd_gendisk[MAX_HD]; + +static struct timer_list device_timer; + +#define TIMEOUT_VALUE (6*HZ) + +#define SET_TIMER \ + do { \ + mod_timer(&device_timer, jiffies + TIMEOUT_VALUE); \ + } while (0) + +static void (*do_hd)(void) = NULL; +#define SET_HANDLER(x) \ +if ((do_hd = (x)) != NULL) \ + SET_TIMER; \ +else \ + del_timer(&device_timer); + + +#if (HD_DELAY > 0) + +#include + +unsigned long last_req; + +unsigned long read_timer(void) +{ + unsigned long t, flags; + int i; + + spin_lock_irqsave(&i8253_lock, flags); + t = jiffies * 11932; + outb_p(0, 0x43); + i = inb_p(0x40); + i |= inb(0x40) << 8; + spin_unlock_irqrestore(&i8253_lock, flags); + return(t - i); +} +#endif + +static void __init hd_setup(char *str, int *ints) +{ + int hdind = 0; + + if (ints[0] != 3) + return; + if (hd_info[0].head != 0) + hdind = 1; + hd_info[hdind].head = ints[2]; + hd_info[hdind].sect = ints[3]; + hd_info[hdind].cyl = ints[1]; + hd_info[hdind].wpcom = 0; + hd_info[hdind].lzone = ints[1]; + hd_info[hdind].ctl = (ints[2] > 8 ? 8 : 0); + NR_HD = hdind+1; +} + +static void dump_status(const char *msg, unsigned int stat) +{ + char *name = "hd?"; + if (CURRENT) + name = CURRENT->rq_disk->disk_name; + +#ifdef VERBOSE_ERRORS + printk("%s: %s: status=0x%02x { ", name, msg, stat & 0xff); + if (stat & BUSY_STAT) printk("Busy "); + if (stat & READY_STAT) printk("DriveReady "); + if (stat & WRERR_STAT) printk("WriteFault "); + if (stat & SEEK_STAT) printk("SeekComplete "); + if (stat & DRQ_STAT) printk("DataRequest "); + if (stat & ECC_STAT) printk("CorrectedError "); + if (stat & INDEX_STAT) printk("Index "); + if (stat & ERR_STAT) printk("Error "); + printk("}\n"); + if ((stat & ERR_STAT) == 0) { + hd_error = 0; + } else { + hd_error = inb(HD_ERROR); + printk("%s: %s: error=0x%02x { ", name, msg, hd_error & 0xff); + if (hd_error & BBD_ERR) printk("BadSector "); + if (hd_error & ECC_ERR) printk("UncorrectableError "); + if (hd_error & ID_ERR) printk("SectorIdNotFound "); + if (hd_error & ABRT_ERR) printk("DriveStatusError "); + if (hd_error & TRK0_ERR) printk("TrackZeroNotFound "); + if (hd_error & MARK_ERR) printk("AddrMarkNotFound "); + printk("}"); + if (hd_error & (BBD_ERR|ECC_ERR|ID_ERR|MARK_ERR)) { + printk(", CHS=%d/%d/%d", (inb(HD_HCYL)<<8) + inb(HD_LCYL), + inb(HD_CURRENT) & 0xf, inb(HD_SECTOR)); + if (CURRENT) + printk(", sector=%ld", CURRENT->sector); + } + printk("\n"); + } +#else + printk("%s: %s: status=0x%02x.\n", name, msg, stat & 0xff); + if ((stat & ERR_STAT) == 0) { + hd_error = 0; + } else { + hd_error = inb(HD_ERROR); + printk("%s: %s: error=0x%02x.\n", name, msg, hd_error & 0xff); + } +#endif +} + +static void check_status(void) +{ + int i = inb_p(HD_STATUS); + + if (!OK_STATUS(i)) { + dump_status("check_status", i); + bad_rw_intr(); + } +} + +static int controller_busy(void) +{ + int retries = 100000; + unsigned char status; + + do { + status = inb_p(HD_STATUS); + } while ((status & BUSY_STAT) && --retries); + return status; +} + +static int status_ok(void) +{ + unsigned char status = inb_p(HD_STATUS); + + if (status & BUSY_STAT) + return 1; /* Ancient, but does it make sense??? */ + if (status & WRERR_STAT) + return 0; + if (!(status & READY_STAT)) + return 0; + if (!(status & SEEK_STAT)) + return 0; + return 1; +} + +static int controller_ready(unsigned int drive, unsigned int head) +{ + int retry = 100; + + do { + if (controller_busy() & BUSY_STAT) + return 0; + outb_p(0xA0 | (drive<<4) | head, HD_CURRENT); + if (status_ok()) + return 1; + } while (--retry); + return 0; +} + +static void hd_out(struct hd_i_struct *disk, + unsigned int nsect, + unsigned int sect, + unsigned int head, + unsigned int cyl, + unsigned int cmd, + void (*intr_addr)(void)) +{ + unsigned short port; + +#if (HD_DELAY > 0) + while (read_timer() - last_req < HD_DELAY) + /* nothing */; +#endif + if (reset) + return; + if (!controller_ready(disk->unit, head)) { + reset = 1; + return; + } + SET_HANDLER(intr_addr); + outb_p(disk->ctl, HD_CMD); + port = HD_DATA; + outb_p(disk->wpcom >> 2, ++port); + outb_p(nsect, ++port); + outb_p(sect, ++port); + outb_p(cyl, ++port); + outb_p(cyl >> 8, ++port); + outb_p(0xA0 | (disk->unit << 4) | head, ++port); + outb_p(cmd, ++port); +} + +static void hd_request (void); + +static int drive_busy(void) +{ + unsigned int i; + unsigned char c; + + for (i = 0; i < 500000 ; i++) { + c = inb_p(HD_STATUS); + if ((c & (BUSY_STAT | READY_STAT | SEEK_STAT)) == STAT_OK) + return 0; + } + dump_status("reset timed out", c); + return 1; +} + +static void reset_controller(void) +{ + int i; + + outb_p(4, HD_CMD); + for (i = 0; i < 1000; i++) barrier(); + outb_p(hd_info[0].ctl & 0x0f, HD_CMD); + for (i = 0; i < 1000; i++) barrier(); + if (drive_busy()) + printk("hd: controller still busy\n"); + else if ((hd_error = inb(HD_ERROR)) != 1) + printk("hd: controller reset failed: %02x\n", hd_error); +} + +static void reset_hd(void) +{ + static int i; + +repeat: + if (reset) { + reset = 0; + i = -1; + reset_controller(); + } else { + check_status(); + if (reset) + goto repeat; + } + if (++i < NR_HD) { + struct hd_i_struct *disk = &hd_info[i]; + disk->special_op = disk->recalibrate = 1; + hd_out(disk, disk->sect, disk->sect, disk->head-1, + disk->cyl, WIN_SPECIFY, &reset_hd); + if (reset) + goto repeat; + } else + hd_request(); +} + +/* + * Ok, don't know what to do with the unexpected interrupts: on some machines + * doing a reset and a retry seems to result in an eternal loop. Right now I + * ignore it, and just set the timeout. + * + * On laptops (and "green" PCs), an unexpected interrupt occurs whenever the + * drive enters "idle", "standby", or "sleep" mode, so if the status looks + * "good", we just ignore the interrupt completely. + */ +static void unexpected_hd_interrupt(void) +{ + unsigned int stat = inb_p(HD_STATUS); + + if (stat & (BUSY_STAT|DRQ_STAT|ECC_STAT|ERR_STAT)) { + dump_status("unexpected interrupt", stat); + SET_TIMER; + } +} + +/* + * bad_rw_intr() now tries to be a bit smarter and does things + * according to the error returned by the controller. + * -Mika Liljeberg (liljeber@cs.Helsinki.FI) + */ +static void bad_rw_intr(void) +{ + struct request *req = CURRENT; + if (req != NULL) { + struct hd_i_struct *disk = req->rq_disk->private_data; + if (++req->errors >= MAX_ERRORS || (hd_error & BBD_ERR)) { + end_request(req, 0); + disk->special_op = disk->recalibrate = 1; + } else if (req->errors % RESET_FREQ == 0) + reset = 1; + else if ((hd_error & TRK0_ERR) || req->errors % RECAL_FREQ == 0) + disk->special_op = disk->recalibrate = 1; + /* Otherwise just retry */ + } +} + +static inline int wait_DRQ(void) +{ + int retries; + int stat; + + for (retries = 0; retries < 100000; retries++) { + stat = inb_p(HD_STATUS); + if (stat & DRQ_STAT) + return 0; + } + dump_status("wait_DRQ", stat); + return -1; +} + +static void read_intr(void) +{ + struct request *req; + int i, retries = 100000; + + do { + i = (unsigned) inb_p(HD_STATUS); + if (i & BUSY_STAT) + continue; + if (!OK_STATUS(i)) + break; + if (i & DRQ_STAT) + goto ok_to_read; + } while (--retries > 0); + dump_status("read_intr", i); + bad_rw_intr(); + hd_request(); + return; +ok_to_read: + req = CURRENT; + insw(HD_DATA, req->buffer, 256); + req->sector++; + req->buffer += 512; + req->errors = 0; + i = --req->nr_sectors; + --req->current_nr_sectors; +#ifdef DEBUG + printk("%s: read: sector %ld, remaining = %ld, buffer=%p\n", + req->rq_disk->disk_name, req->sector, req->nr_sectors, + req->buffer+512); +#endif + if (req->current_nr_sectors <= 0) + end_request(req, 1); + if (i > 0) { + SET_HANDLER(&read_intr); + return; + } + (void) inb_p(HD_STATUS); +#if (HD_DELAY > 0) + last_req = read_timer(); +#endif + if (elv_next_request(QUEUE)) + hd_request(); + return; +} + +static void write_intr(void) +{ + struct request *req = CURRENT; + int i; + int retries = 100000; + + do { + i = (unsigned) inb_p(HD_STATUS); + if (i & BUSY_STAT) + continue; + if (!OK_STATUS(i)) + break; + if ((req->nr_sectors <= 1) || (i & DRQ_STAT)) + goto ok_to_write; + } while (--retries > 0); + dump_status("write_intr", i); + bad_rw_intr(); + hd_request(); + return; +ok_to_write: + req->sector++; + i = --req->nr_sectors; + --req->current_nr_sectors; + req->buffer += 512; + if (!i || (req->bio && req->current_nr_sectors <= 0)) + end_request(req, 1); + if (i > 0) { + SET_HANDLER(&write_intr); + outsw(HD_DATA, req->buffer, 256); + local_irq_enable(); + } else { +#if (HD_DELAY > 0) + last_req = read_timer(); +#endif + hd_request(); + } + return; +} + +static void recal_intr(void) +{ + check_status(); +#if (HD_DELAY > 0) + last_req = read_timer(); +#endif + hd_request(); +} + +/* + * This is another of the error-routines I don't know what to do with. The + * best idea seems to just set reset, and start all over again. + */ +static void hd_times_out(unsigned long dummy) +{ + char *name; + + do_hd = NULL; + + if (!CURRENT) + return; + + disable_irq(HD_IRQ); + local_irq_enable(); + reset = 1; + name = CURRENT->rq_disk->disk_name; + printk("%s: timeout\n", name); + if (++CURRENT->errors >= MAX_ERRORS) { +#ifdef DEBUG + printk("%s: too many errors\n", name); +#endif + end_request(CURRENT, 0); + } + local_irq_disable(); + hd_request(); + enable_irq(HD_IRQ); +} + +static int do_special_op(struct hd_i_struct *disk, struct request *req) +{ + if (disk->recalibrate) { + disk->recalibrate = 0; + hd_out(disk, disk->sect, 0, 0, 0, WIN_RESTORE, &recal_intr); + return reset; + } + if (disk->head > 16) { + printk("%s: cannot handle device with more than 16 heads - giving up\n", req->rq_disk->disk_name); + end_request(req, 0); + } + disk->special_op = 0; + return 1; +} + +/* + * The driver enables interrupts as much as possible. In order to do this, + * (a) the device-interrupt is disabled before entering hd_request(), + * and (b) the timeout-interrupt is disabled before the sti(). + * + * Interrupts are still masked (by default) whenever we are exchanging + * data/cmds with a drive, because some drives seem to have very poor + * tolerance for latency during I/O. The IDE driver has support to unmask + * interrupts for non-broken hardware, so use that driver if required. + */ +static void hd_request(void) +{ + unsigned int block, nsect, sec, track, head, cyl; + struct hd_i_struct *disk; + struct request *req; + + if (do_hd) + return; +repeat: + del_timer(&device_timer); + local_irq_enable(); + + req = CURRENT; + if (!req) { + do_hd = NULL; + return; + } + + if (reset) { + local_irq_disable(); + reset_hd(); + return; + } + disk = req->rq_disk->private_data; + block = req->sector; + nsect = req->nr_sectors; + if (block >= get_capacity(req->rq_disk) || + ((block+nsect) > get_capacity(req->rq_disk))) { + printk("%s: bad access: block=%d, count=%d\n", + req->rq_disk->disk_name, block, nsect); + end_request(req, 0); + goto repeat; + } + + if (disk->special_op) { + if (do_special_op(disk, req)) + goto repeat; + return; + } + sec = block % disk->sect + 1; + track = block / disk->sect; + head = track % disk->head; + cyl = track / disk->head; +#ifdef DEBUG + printk("%s: %sing: CHS=%d/%d/%d, sectors=%d, buffer=%p\n", + req->rq_disk->disk_name, + req_data_dir(req) == READ ? "read" : "writ", + cyl, head, sec, nsect, req->buffer); +#endif + if (blk_fs_request(req)) { + switch (rq_data_dir(req)) { + case READ: + hd_out(disk, nsect, sec, head, cyl, WIN_READ, + &read_intr); + if (reset) + goto repeat; + break; + case WRITE: + hd_out(disk, nsect, sec, head, cyl, WIN_WRITE, + &write_intr); + if (reset) + goto repeat; + if (wait_DRQ()) { + bad_rw_intr(); + goto repeat; + } + outsw(HD_DATA, req->buffer, 256); + break; + default: + printk("unknown hd-command\n"); + end_request(req, 0); + break; + } + } +} + +static void do_hd_request(struct request_queue *q) +{ + disable_irq(HD_IRQ); + hd_request(); + enable_irq(HD_IRQ); +} + +static int hd_getgeo(struct block_device *bdev, struct hd_geometry *geo) +{ + struct hd_i_struct *disk = bdev->bd_disk->private_data; + + geo->heads = disk->head; + geo->sectors = disk->sect; + geo->cylinders = disk->cyl; + return 0; +} + +/* + * Releasing a block device means we sync() it, so that it can safely + * be forgotten about... + */ + +static irqreturn_t hd_interrupt(int irq, void *dev_id) +{ + void (*handler)(void) = do_hd; + + do_hd = NULL; + del_timer(&device_timer); + if (!handler) + handler = unexpected_hd_interrupt; + handler(); + local_irq_enable(); + return IRQ_HANDLED; +} + +static struct block_device_operations hd_fops = { + .getgeo = hd_getgeo, +}; + +/* + * This is the hard disk IRQ description. The IRQF_DISABLED in sa_flags + * means we run the IRQ-handler with interrupts disabled: this is bad for + * interrupt latency, but anything else has led to problems on some + * machines. + * + * We enable interrupts in some of the routines after making sure it's + * safe. + */ + +static int __init hd_init(void) +{ + int drive; + + if (register_blkdev(MAJOR_NR, "hd")) + return -1; + + hd_queue = blk_init_queue(do_hd_request, &hd_lock); + if (!hd_queue) { + unregister_blkdev(MAJOR_NR, "hd"); + return -ENOMEM; + } + + blk_queue_max_sectors(hd_queue, 255); + init_timer(&device_timer); + device_timer.function = hd_times_out; + blk_queue_hardsect_size(hd_queue, 512); + + if (!NR_HD) { + /* + * We don't know anything about the drive. This means + * that you *MUST* specify the drive parameters to the + * kernel yourself. + * + * If we were on an i386, we used to read this info from + * the BIOS or CMOS. This doesn't work all that well, + * since this assumes that this is a primary or secondary + * drive, and if we're using this legacy driver, it's + * probably an auxilliary controller added to recover + * legacy data off an ST-506 drive. Either way, it's + * definitely safest to have the user explicitly specify + * the information. + */ + printk("hd: no drives specified - use hd=cyl,head,sectors" + " on kernel command line\n"); + goto out; + } + + for (drive = 0 ; drive < NR_HD ; drive++) { + struct gendisk *disk = alloc_disk(64); + struct hd_i_struct *p = &hd_info[drive]; + if (!disk) + goto Enomem; + disk->major = MAJOR_NR; + disk->first_minor = drive << 6; + disk->fops = &hd_fops; + sprintf(disk->disk_name, "hd%c", 'a'+drive); + disk->private_data = p; + set_capacity(disk, p->head * p->sect * p->cyl); + disk->queue = hd_queue; + p->unit = drive; + hd_gendisk[drive] = disk; + printk("%s: %luMB, CHS=%d/%d/%d\n", + disk->disk_name, (unsigned long)get_capacity(disk)/2048, + p->cyl, p->head, p->sect); + } + + if (request_irq(HD_IRQ, hd_interrupt, IRQF_DISABLED, "hd", NULL)) { + printk("hd: unable to get IRQ%d for the hard disk driver\n", + HD_IRQ); + goto out1; + } + if (!request_region(HD_DATA, 8, "hd")) { + printk(KERN_WARNING "hd: port 0x%x busy\n", HD_DATA); + goto out2; + } + if (!request_region(HD_CMD, 1, "hd(cmd)")) { + printk(KERN_WARNING "hd: port 0x%x busy\n", HD_CMD); + goto out3; + } + + /* Let them fly */ + for (drive = 0; drive < NR_HD; drive++) + add_disk(hd_gendisk[drive]); + + return 0; + +out3: + release_region(HD_DATA, 8); +out2: + free_irq(HD_IRQ, NULL); +out1: + for (drive = 0; drive < NR_HD; drive++) + put_disk(hd_gendisk[drive]); + NR_HD = 0; +out: + del_timer(&device_timer); + unregister_blkdev(MAJOR_NR, "hd"); + blk_cleanup_queue(hd_queue); + return -1; +Enomem: + while (drive--) + put_disk(hd_gendisk[drive]); + goto out; +} + +static int __init parse_hd_setup(char *line) +{ + int ints[6]; + + (void) get_options(line, ARRAY_SIZE(ints), ints); + hd_setup(NULL, ints); + + return 1; +} +__setup("hd=", parse_hd_setup); + +late_initcall(hd_init); diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 39b95f9c2ad1..15b09b89588a 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -1000,27 +1000,4 @@ config BLK_DEV_IDEDMA endif -config BLK_DEV_HD - bool "Old hard disk (MFM/RLL/IDE) driver" - depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN - help - There are two drivers for MFM/RLL/IDE hard disks. Most people use - the newer enhanced driver, but this old one is still around for two - reasons. Some older systems have strange timing problems and seem to - work only with the old driver (which itself does not work with some - newer systems). The other reason is that the old driver is smaller, - since it lacks the enhanced functionality of the new one. This makes - it a good choice for systems with very tight memory restrictions, or - for systems with only older MFM/RLL/ESDI drives. Choosing the old - driver can save 13 KB or so of kernel memory. - - If you want to use this driver together with the new one you have - to use "hda=noprobe hdb=noprobe" kernel parameters to prevent the new - driver from probing the primary interface. - - If you are unsure, then just choose the Enhanced IDE/MFM/RLL driver - instead of this one. For more detailed information, read the - Disk-HOWTO, available from - . - endif # IDE diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index 39e99ace5cd3..5d414e301a5a 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -61,8 +61,3 @@ ifeq ($(CONFIG_BLK_DEV_PLATFORM), y) endif obj-$(CONFIG_BLK_DEV_IDE) += arm/ mips/ - -ifeq ($(CONFIG_BLK_DEV_HD), y) - hd-core-y += legacy/hd.o - obj-y += hd-core.o -endif diff --git a/drivers/ide/legacy/hd.c b/drivers/ide/legacy/hd.c deleted file mode 100644 index 00b695652b2a..000000000000 --- a/drivers/ide/legacy/hd.c +++ /dev/null @@ -1,815 +0,0 @@ -/* - * Copyright (C) 1991, 1992 Linus Torvalds - * - * This is the low-level hd interrupt support. It traverses the - * request-list, using interrupts to jump between functions. As - * all the functions are called within interrupts, we may not - * sleep. Special care is recommended. - * - * modified by Drew Eckhardt to check nr of hd's from the CMOS. - * - * Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug - * in the early extended-partition checks and added DM partitions - * - * IRQ-unmask, drive-id, multiple-mode, support for ">16 heads", - * and general streamlining by Mark Lord. - * - * Removed 99% of above. Use Mark's ide driver for those options. - * This is now a lightweight ST-506 driver. (Paul Gortmaker) - * - * Modified 1995 Russell King for ARM processor. - * - * Bugfix: max_sectors must be <= 255 or the wheels tend to come - * off in a hurry once you queue things up - Paul G. 02/2001 - */ - -/* Uncomment the following if you want verbose error reports. */ -/* #define VERBOSE_ERRORS */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include /* CMOS defines */ -#include -#include -#include - -#define REALLY_SLOW_IO -#include -#include -#include - -#ifdef __arm__ -#undef HD_IRQ -#endif -#include -#ifdef __arm__ -#define HD_IRQ IRQ_HARDDISK -#endif - -/* Hd controller regster ports */ - -#define HD_DATA 0x1f0 /* _CTL when writing */ -#define HD_ERROR 0x1f1 /* see err-bits */ -#define HD_NSECTOR 0x1f2 /* nr of sectors to read/write */ -#define HD_SECTOR 0x1f3 /* starting sector */ -#define HD_LCYL 0x1f4 /* starting cylinder */ -#define HD_HCYL 0x1f5 /* high byte of starting cyl */ -#define HD_CURRENT 0x1f6 /* 101dhhhh , d=drive, hhhh=head */ -#define HD_STATUS 0x1f7 /* see status-bits */ -#define HD_FEATURE HD_ERROR /* same io address, read=error, write=feature */ -#define HD_PRECOMP HD_FEATURE /* obsolete use of this port - predates IDE */ -#define HD_COMMAND HD_STATUS /* same io address, read=status, write=cmd */ - -#define HD_CMD 0x3f6 /* used for resets */ -#define HD_ALTSTATUS 0x3f6 /* same as HD_STATUS but doesn't clear irq */ - -/* Bits of HD_STATUS */ -#define ERR_STAT 0x01 -#define INDEX_STAT 0x02 -#define ECC_STAT 0x04 /* Corrected error */ -#define DRQ_STAT 0x08 -#define SEEK_STAT 0x10 -#define SERVICE_STAT SEEK_STAT -#define WRERR_STAT 0x20 -#define READY_STAT 0x40 -#define BUSY_STAT 0x80 - -/* Bits for HD_ERROR */ -#define MARK_ERR 0x01 /* Bad address mark */ -#define TRK0_ERR 0x02 /* couldn't find track 0 */ -#define ABRT_ERR 0x04 /* Command aborted */ -#define MCR_ERR 0x08 /* media change request */ -#define ID_ERR 0x10 /* ID field not found */ -#define MC_ERR 0x20 /* media changed */ -#define ECC_ERR 0x40 /* Uncorrectable ECC error */ -#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */ -#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */ - -static DEFINE_SPINLOCK(hd_lock); -static struct request_queue *hd_queue; - -#define MAJOR_NR HD_MAJOR -#define QUEUE (hd_queue) -#define CURRENT elv_next_request(hd_queue) - -#define TIMEOUT_VALUE (6*HZ) -#define HD_DELAY 0 - -#define MAX_ERRORS 16 /* Max read/write errors/sector */ -#define RESET_FREQ 8 /* Reset controller every 8th retry */ -#define RECAL_FREQ 4 /* Recalibrate every 4th retry */ -#define MAX_HD 2 - -#define STAT_OK (READY_STAT|SEEK_STAT) -#define OK_STATUS(s) (((s)&(STAT_OK|(BUSY_STAT|WRERR_STAT|ERR_STAT)))==STAT_OK) - -static void recal_intr(void); -static void bad_rw_intr(void); - -static int reset; -static int hd_error; - -/* - * This struct defines the HD's and their types. - */ -struct hd_i_struct { - unsigned int head, sect, cyl, wpcom, lzone, ctl; - int unit; - int recalibrate; - int special_op; -}; - -#ifdef HD_TYPE -static struct hd_i_struct hd_info[] = { HD_TYPE }; -static int NR_HD = ARRAY_SIZE(hd_info); -#else -static struct hd_i_struct hd_info[MAX_HD]; -static int NR_HD; -#endif - -static struct gendisk *hd_gendisk[MAX_HD]; - -static struct timer_list device_timer; - -#define TIMEOUT_VALUE (6*HZ) - -#define SET_TIMER \ - do { \ - mod_timer(&device_timer, jiffies + TIMEOUT_VALUE); \ - } while (0) - -static void (*do_hd)(void) = NULL; -#define SET_HANDLER(x) \ -if ((do_hd = (x)) != NULL) \ - SET_TIMER; \ -else \ - del_timer(&device_timer); - - -#if (HD_DELAY > 0) - -#include - -unsigned long last_req; - -unsigned long read_timer(void) -{ - unsigned long t, flags; - int i; - - spin_lock_irqsave(&i8253_lock, flags); - t = jiffies * 11932; - outb_p(0, 0x43); - i = inb_p(0x40); - i |= inb(0x40) << 8; - spin_unlock_irqrestore(&i8253_lock, flags); - return(t - i); -} -#endif - -static void __init hd_setup(char *str, int *ints) -{ - int hdind = 0; - - if (ints[0] != 3) - return; - if (hd_info[0].head != 0) - hdind = 1; - hd_info[hdind].head = ints[2]; - hd_info[hdind].sect = ints[3]; - hd_info[hdind].cyl = ints[1]; - hd_info[hdind].wpcom = 0; - hd_info[hdind].lzone = ints[1]; - hd_info[hdind].ctl = (ints[2] > 8 ? 8 : 0); - NR_HD = hdind+1; -} - -static void dump_status(const char *msg, unsigned int stat) -{ - char *name = "hd?"; - if (CURRENT) - name = CURRENT->rq_disk->disk_name; - -#ifdef VERBOSE_ERRORS - printk("%s: %s: status=0x%02x { ", name, msg, stat & 0xff); - if (stat & BUSY_STAT) printk("Busy "); - if (stat & READY_STAT) printk("DriveReady "); - if (stat & WRERR_STAT) printk("WriteFault "); - if (stat & SEEK_STAT) printk("SeekComplete "); - if (stat & DRQ_STAT) printk("DataRequest "); - if (stat & ECC_STAT) printk("CorrectedError "); - if (stat & INDEX_STAT) printk("Index "); - if (stat & ERR_STAT) printk("Error "); - printk("}\n"); - if ((stat & ERR_STAT) == 0) { - hd_error = 0; - } else { - hd_error = inb(HD_ERROR); - printk("%s: %s: error=0x%02x { ", name, msg, hd_error & 0xff); - if (hd_error & BBD_ERR) printk("BadSector "); - if (hd_error & ECC_ERR) printk("UncorrectableError "); - if (hd_error & ID_ERR) printk("SectorIdNotFound "); - if (hd_error & ABRT_ERR) printk("DriveStatusError "); - if (hd_error & TRK0_ERR) printk("TrackZeroNotFound "); - if (hd_error & MARK_ERR) printk("AddrMarkNotFound "); - printk("}"); - if (hd_error & (BBD_ERR|ECC_ERR|ID_ERR|MARK_ERR)) { - printk(", CHS=%d/%d/%d", (inb(HD_HCYL)<<8) + inb(HD_LCYL), - inb(HD_CURRENT) & 0xf, inb(HD_SECTOR)); - if (CURRENT) - printk(", sector=%ld", CURRENT->sector); - } - printk("\n"); - } -#else - printk("%s: %s: status=0x%02x.\n", name, msg, stat & 0xff); - if ((stat & ERR_STAT) == 0) { - hd_error = 0; - } else { - hd_error = inb(HD_ERROR); - printk("%s: %s: error=0x%02x.\n", name, msg, hd_error & 0xff); - } -#endif -} - -static void check_status(void) -{ - int i = inb_p(HD_STATUS); - - if (!OK_STATUS(i)) { - dump_status("check_status", i); - bad_rw_intr(); - } -} - -static int controller_busy(void) -{ - int retries = 100000; - unsigned char status; - - do { - status = inb_p(HD_STATUS); - } while ((status & BUSY_STAT) && --retries); - return status; -} - -static int status_ok(void) -{ - unsigned char status = inb_p(HD_STATUS); - - if (status & BUSY_STAT) - return 1; /* Ancient, but does it make sense??? */ - if (status & WRERR_STAT) - return 0; - if (!(status & READY_STAT)) - return 0; - if (!(status & SEEK_STAT)) - return 0; - return 1; -} - -static int controller_ready(unsigned int drive, unsigned int head) -{ - int retry = 100; - - do { - if (controller_busy() & BUSY_STAT) - return 0; - outb_p(0xA0 | (drive<<4) | head, HD_CURRENT); - if (status_ok()) - return 1; - } while (--retry); - return 0; -} - -static void hd_out(struct hd_i_struct *disk, - unsigned int nsect, - unsigned int sect, - unsigned int head, - unsigned int cyl, - unsigned int cmd, - void (*intr_addr)(void)) -{ - unsigned short port; - -#if (HD_DELAY > 0) - while (read_timer() - last_req < HD_DELAY) - /* nothing */; -#endif - if (reset) - return; - if (!controller_ready(disk->unit, head)) { - reset = 1; - return; - } - SET_HANDLER(intr_addr); - outb_p(disk->ctl, HD_CMD); - port = HD_DATA; - outb_p(disk->wpcom >> 2, ++port); - outb_p(nsect, ++port); - outb_p(sect, ++port); - outb_p(cyl, ++port); - outb_p(cyl >> 8, ++port); - outb_p(0xA0 | (disk->unit << 4) | head, ++port); - outb_p(cmd, ++port); -} - -static void hd_request (void); - -static int drive_busy(void) -{ - unsigned int i; - unsigned char c; - - for (i = 0; i < 500000 ; i++) { - c = inb_p(HD_STATUS); - if ((c & (BUSY_STAT | READY_STAT | SEEK_STAT)) == STAT_OK) - return 0; - } - dump_status("reset timed out", c); - return 1; -} - -static void reset_controller(void) -{ - int i; - - outb_p(4, HD_CMD); - for (i = 0; i < 1000; i++) barrier(); - outb_p(hd_info[0].ctl & 0x0f, HD_CMD); - for (i = 0; i < 1000; i++) barrier(); - if (drive_busy()) - printk("hd: controller still busy\n"); - else if ((hd_error = inb(HD_ERROR)) != 1) - printk("hd: controller reset failed: %02x\n", hd_error); -} - -static void reset_hd(void) -{ - static int i; - -repeat: - if (reset) { - reset = 0; - i = -1; - reset_controller(); - } else { - check_status(); - if (reset) - goto repeat; - } - if (++i < NR_HD) { - struct hd_i_struct *disk = &hd_info[i]; - disk->special_op = disk->recalibrate = 1; - hd_out(disk, disk->sect, disk->sect, disk->head-1, - disk->cyl, WIN_SPECIFY, &reset_hd); - if (reset) - goto repeat; - } else - hd_request(); -} - -/* - * Ok, don't know what to do with the unexpected interrupts: on some machines - * doing a reset and a retry seems to result in an eternal loop. Right now I - * ignore it, and just set the timeout. - * - * On laptops (and "green" PCs), an unexpected interrupt occurs whenever the - * drive enters "idle", "standby", or "sleep" mode, so if the status looks - * "good", we just ignore the interrupt completely. - */ -static void unexpected_hd_interrupt(void) -{ - unsigned int stat = inb_p(HD_STATUS); - - if (stat & (BUSY_STAT|DRQ_STAT|ECC_STAT|ERR_STAT)) { - dump_status("unexpected interrupt", stat); - SET_TIMER; - } -} - -/* - * bad_rw_intr() now tries to be a bit smarter and does things - * according to the error returned by the controller. - * -Mika Liljeberg (liljeber@cs.Helsinki.FI) - */ -static void bad_rw_intr(void) -{ - struct request *req = CURRENT; - if (req != NULL) { - struct hd_i_struct *disk = req->rq_disk->private_data; - if (++req->errors >= MAX_ERRORS || (hd_error & BBD_ERR)) { - end_request(req, 0); - disk->special_op = disk->recalibrate = 1; - } else if (req->errors % RESET_FREQ == 0) - reset = 1; - else if ((hd_error & TRK0_ERR) || req->errors % RECAL_FREQ == 0) - disk->special_op = disk->recalibrate = 1; - /* Otherwise just retry */ - } -} - -static inline int wait_DRQ(void) -{ - int retries; - int stat; - - for (retries = 0; retries < 100000; retries++) { - stat = inb_p(HD_STATUS); - if (stat & DRQ_STAT) - return 0; - } - dump_status("wait_DRQ", stat); - return -1; -} - -static void read_intr(void) -{ - struct request *req; - int i, retries = 100000; - - do { - i = (unsigned) inb_p(HD_STATUS); - if (i & BUSY_STAT) - continue; - if (!OK_STATUS(i)) - break; - if (i & DRQ_STAT) - goto ok_to_read; - } while (--retries > 0); - dump_status("read_intr", i); - bad_rw_intr(); - hd_request(); - return; -ok_to_read: - req = CURRENT; - insw(HD_DATA, req->buffer, 256); - req->sector++; - req->buffer += 512; - req->errors = 0; - i = --req->nr_sectors; - --req->current_nr_sectors; -#ifdef DEBUG - printk("%s: read: sector %ld, remaining = %ld, buffer=%p\n", - req->rq_disk->disk_name, req->sector, req->nr_sectors, - req->buffer+512); -#endif - if (req->current_nr_sectors <= 0) - end_request(req, 1); - if (i > 0) { - SET_HANDLER(&read_intr); - return; - } - (void) inb_p(HD_STATUS); -#if (HD_DELAY > 0) - last_req = read_timer(); -#endif - if (elv_next_request(QUEUE)) - hd_request(); - return; -} - -static void write_intr(void) -{ - struct request *req = CURRENT; - int i; - int retries = 100000; - - do { - i = (unsigned) inb_p(HD_STATUS); - if (i & BUSY_STAT) - continue; - if (!OK_STATUS(i)) - break; - if ((req->nr_sectors <= 1) || (i & DRQ_STAT)) - goto ok_to_write; - } while (--retries > 0); - dump_status("write_intr", i); - bad_rw_intr(); - hd_request(); - return; -ok_to_write: - req->sector++; - i = --req->nr_sectors; - --req->current_nr_sectors; - req->buffer += 512; - if (!i || (req->bio && req->current_nr_sectors <= 0)) - end_request(req, 1); - if (i > 0) { - SET_HANDLER(&write_intr); - outsw(HD_DATA, req->buffer, 256); - local_irq_enable(); - } else { -#if (HD_DELAY > 0) - last_req = read_timer(); -#endif - hd_request(); - } - return; -} - -static void recal_intr(void) -{ - check_status(); -#if (HD_DELAY > 0) - last_req = read_timer(); -#endif - hd_request(); -} - -/* - * This is another of the error-routines I don't know what to do with. The - * best idea seems to just set reset, and start all over again. - */ -static void hd_times_out(unsigned long dummy) -{ - char *name; - - do_hd = NULL; - - if (!CURRENT) - return; - - disable_irq(HD_IRQ); - local_irq_enable(); - reset = 1; - name = CURRENT->rq_disk->disk_name; - printk("%s: timeout\n", name); - if (++CURRENT->errors >= MAX_ERRORS) { -#ifdef DEBUG - printk("%s: too many errors\n", name); -#endif - end_request(CURRENT, 0); - } - local_irq_disable(); - hd_request(); - enable_irq(HD_IRQ); -} - -static int do_special_op(struct hd_i_struct *disk, struct request *req) -{ - if (disk->recalibrate) { - disk->recalibrate = 0; - hd_out(disk, disk->sect, 0, 0, 0, WIN_RESTORE, &recal_intr); - return reset; - } - if (disk->head > 16) { - printk("%s: cannot handle device with more than 16 heads - giving up\n", req->rq_disk->disk_name); - end_request(req, 0); - } - disk->special_op = 0; - return 1; -} - -/* - * The driver enables interrupts as much as possible. In order to do this, - * (a) the device-interrupt is disabled before entering hd_request(), - * and (b) the timeout-interrupt is disabled before the sti(). - * - * Interrupts are still masked (by default) whenever we are exchanging - * data/cmds with a drive, because some drives seem to have very poor - * tolerance for latency during I/O. The IDE driver has support to unmask - * interrupts for non-broken hardware, so use that driver if required. - */ -static void hd_request(void) -{ - unsigned int block, nsect, sec, track, head, cyl; - struct hd_i_struct *disk; - struct request *req; - - if (do_hd) - return; -repeat: - del_timer(&device_timer); - local_irq_enable(); - - req = CURRENT; - if (!req) { - do_hd = NULL; - return; - } - - if (reset) { - local_irq_disable(); - reset_hd(); - return; - } - disk = req->rq_disk->private_data; - block = req->sector; - nsect = req->nr_sectors; - if (block >= get_capacity(req->rq_disk) || - ((block+nsect) > get_capacity(req->rq_disk))) { - printk("%s: bad access: block=%d, count=%d\n", - req->rq_disk->disk_name, block, nsect); - end_request(req, 0); - goto repeat; - } - - if (disk->special_op) { - if (do_special_op(disk, req)) - goto repeat; - return; - } - sec = block % disk->sect + 1; - track = block / disk->sect; - head = track % disk->head; - cyl = track / disk->head; -#ifdef DEBUG - printk("%s: %sing: CHS=%d/%d/%d, sectors=%d, buffer=%p\n", - req->rq_disk->disk_name, - req_data_dir(req) == READ ? "read" : "writ", - cyl, head, sec, nsect, req->buffer); -#endif - if (blk_fs_request(req)) { - switch (rq_data_dir(req)) { - case READ: - hd_out(disk, nsect, sec, head, cyl, WIN_READ, - &read_intr); - if (reset) - goto repeat; - break; - case WRITE: - hd_out(disk, nsect, sec, head, cyl, WIN_WRITE, - &write_intr); - if (reset) - goto repeat; - if (wait_DRQ()) { - bad_rw_intr(); - goto repeat; - } - outsw(HD_DATA, req->buffer, 256); - break; - default: - printk("unknown hd-command\n"); - end_request(req, 0); - break; - } - } -} - -static void do_hd_request(struct request_queue *q) -{ - disable_irq(HD_IRQ); - hd_request(); - enable_irq(HD_IRQ); -} - -static int hd_getgeo(struct block_device *bdev, struct hd_geometry *geo) -{ - struct hd_i_struct *disk = bdev->bd_disk->private_data; - - geo->heads = disk->head; - geo->sectors = disk->sect; - geo->cylinders = disk->cyl; - return 0; -} - -/* - * Releasing a block device means we sync() it, so that it can safely - * be forgotten about... - */ - -static irqreturn_t hd_interrupt(int irq, void *dev_id) -{ - void (*handler)(void) = do_hd; - - do_hd = NULL; - del_timer(&device_timer); - if (!handler) - handler = unexpected_hd_interrupt; - handler(); - local_irq_enable(); - return IRQ_HANDLED; -} - -static struct block_device_operations hd_fops = { - .getgeo = hd_getgeo, -}; - -/* - * This is the hard disk IRQ description. The IRQF_DISABLED in sa_flags - * means we run the IRQ-handler with interrupts disabled: this is bad for - * interrupt latency, but anything else has led to problems on some - * machines. - * - * We enable interrupts in some of the routines after making sure it's - * safe. - */ - -static int __init hd_init(void) -{ - int drive; - - if (register_blkdev(MAJOR_NR, "hd")) - return -1; - - hd_queue = blk_init_queue(do_hd_request, &hd_lock); - if (!hd_queue) { - unregister_blkdev(MAJOR_NR, "hd"); - return -ENOMEM; - } - - blk_queue_max_sectors(hd_queue, 255); - init_timer(&device_timer); - device_timer.function = hd_times_out; - blk_queue_hardsect_size(hd_queue, 512); - - if (!NR_HD) { - /* - * We don't know anything about the drive. This means - * that you *MUST* specify the drive parameters to the - * kernel yourself. - * - * If we were on an i386, we used to read this info from - * the BIOS or CMOS. This doesn't work all that well, - * since this assumes that this is a primary or secondary - * drive, and if we're using this legacy driver, it's - * probably an auxilliary controller added to recover - * legacy data off an ST-506 drive. Either way, it's - * definitely safest to have the user explicitly specify - * the information. - */ - printk("hd: no drives specified - use hd=cyl,head,sectors" - " on kernel command line\n"); - goto out; - } - - for (drive = 0 ; drive < NR_HD ; drive++) { - struct gendisk *disk = alloc_disk(64); - struct hd_i_struct *p = &hd_info[drive]; - if (!disk) - goto Enomem; - disk->major = MAJOR_NR; - disk->first_minor = drive << 6; - disk->fops = &hd_fops; - sprintf(disk->disk_name, "hd%c", 'a'+drive); - disk->private_data = p; - set_capacity(disk, p->head * p->sect * p->cyl); - disk->queue = hd_queue; - p->unit = drive; - hd_gendisk[drive] = disk; - printk("%s: %luMB, CHS=%d/%d/%d\n", - disk->disk_name, (unsigned long)get_capacity(disk)/2048, - p->cyl, p->head, p->sect); - } - - if (request_irq(HD_IRQ, hd_interrupt, IRQF_DISABLED, "hd", NULL)) { - printk("hd: unable to get IRQ%d for the hard disk driver\n", - HD_IRQ); - goto out1; - } - if (!request_region(HD_DATA, 8, "hd")) { - printk(KERN_WARNING "hd: port 0x%x busy\n", HD_DATA); - goto out2; - } - if (!request_region(HD_CMD, 1, "hd(cmd)")) { - printk(KERN_WARNING "hd: port 0x%x busy\n", HD_CMD); - goto out3; - } - - /* Let them fly */ - for (drive = 0; drive < NR_HD; drive++) - add_disk(hd_gendisk[drive]); - - return 0; - -out3: - release_region(HD_DATA, 8); -out2: - free_irq(HD_IRQ, NULL); -out1: - for (drive = 0; drive < NR_HD; drive++) - put_disk(hd_gendisk[drive]); - NR_HD = 0; -out: - del_timer(&device_timer); - unregister_blkdev(MAJOR_NR, "hd"); - blk_cleanup_queue(hd_queue); - return -1; -Enomem: - while (drive--) - put_disk(hd_gendisk[drive]); - goto out; -} - -static int __init parse_hd_setup(char *line) -{ - int ints[6]; - - (void) get_options(line, ARRAY_SIZE(ints), ints); - hd_setup(NULL, ints); - - return 1; -} -__setup("hd=", parse_hd_setup); - -late_initcall(hd_init); -- cgit v1.2.2 From f327c1c33f4882c70f29ff3a9ff7c55c1951d1f6 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 16 Jul 2008 20:33:47 +0200 Subject: update the BLK_DEV_HD help text Many people will see this option the first time now that it is in drivers/block/ Make it clear that virtually noone needs it. Signed-off-by: Adrian Bunk Cc: rmk@arm.linux.org.uk Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/block/Kconfig | 26 +++++++------------------- 1 file changed, 7 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index c3909743c484..61ad8d639ba3 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -434,27 +434,15 @@ config VIRTIO_BLK lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. config BLK_DEV_HD - bool "Old hard disk (MFM/RLL/IDE) driver" + bool "Very old hard disk (MFM/RLL/IDE) driver" depends on HAVE_IDE depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN help - There are two drivers for MFM/RLL/IDE hard disks. Most people use - the newer enhanced driver, but this old one is still around for two - reasons. Some older systems have strange timing problems and seem to - work only with the old driver (which itself does not work with some - newer systems). The other reason is that the old driver is smaller, - since it lacks the enhanced functionality of the new one. This makes - it a good choice for systems with very tight memory restrictions, or - for systems with only older MFM/RLL/ESDI drives. Choosing the old - driver can save 13 KB or so of kernel memory. - - If you want to use this driver together with the new one you have - to use "hda=noprobe hdb=noprobe" kernel parameters to prevent the new - driver from probing the primary interface. - - If you are unsure, then just choose the Enhanced IDE/MFM/RLL driver - instead of this one. For more detailed information, read the - Disk-HOWTO, available from - . + This is a very old hard disk driver that lacks the enhanced + functionality of the newer ones. + + It is required for systems with ancient MFM/RLL/ESDI drives. + + If unsure, say N. endif # BLK_DEV -- cgit v1.2.2 From 72a3d651b2fe341a8ae2ca164c395aa3007350cd Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 16 Jul 2008 20:33:48 +0200 Subject: hd.c: remove the #include The code that needed this #include was removed one year ago. Signed-off-by: Adrian Bunk Cc: rmk@arm.linux.org.uk Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/block/hd.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/hd.c b/drivers/block/hd.c index 00b695652b2a..682243bf2e46 100644 --- a/drivers/block/hd.c +++ b/drivers/block/hd.c @@ -37,7 +37,6 @@ #include #include #include -#include /* CMOS defines */ #include #include #include -- cgit v1.2.2 From 79e36a9f54aaf4a52eb2d9520953aa3960e99294 Mon Sep 17 00:00:00 2001 From: Elias Oltmanns Date: Wed, 16 Jul 2008 20:33:48 +0200 Subject: IDE: Fix HDIO_DRIVE_RESET handling Currently, the code path executing an HDIO_DRIVE_RESET ioctl is broken in various ways. Most importantly, it is treated as an out of band request in an illegal way which may very likely lead to system lock ups. Use the drive's request queue to avoid this problem (and fix a locking issue for free along the way). Signed-off-by: Elias Oltmanns Cc: "Alan Cox" Cc: "Randy Dunlap" Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 23 ++++++++++++++++++++++- drivers/ide/ide-iops.c | 18 +++++++++++++----- drivers/ide/ide.c | 41 +++++++++++++++-------------------------- 3 files changed, 50 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 28057747c1f8..2b33c129740b 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -766,6 +766,18 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, return ide_stopped; } +static ide_startstop_t ide_special_rq(ide_drive_t *drive, struct request *rq) +{ + switch (rq->cmd[0]) { + case REQ_DRIVE_RESET: + return ide_do_reset(drive); + default: + blk_dump_rq_flags(rq, "ide_special_rq - bad request"); + ide_end_request(drive, 0, 0); + return ide_stopped; + } +} + static void ide_check_pm_state(ide_drive_t *drive, struct request *rq) { struct request_pm_state *pm = rq->data; @@ -869,7 +881,16 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) pm->pm_step == ide_pm_state_completed) ide_complete_pm_request(drive, rq); return startstop; - } + } else if (!rq->rq_disk && blk_special_request(rq)) + /* + * TODO: Once all ULDs have been modified to + * check for specific op codes rather than + * blindly accepting any special request, the + * check for ->rq_disk above may be replaced + * by a more suitable mechanism or even + * dropped entirely. + */ + return ide_special_rq(drive, rq); drv = *(ide_driver_t **)rq->rq_disk->private_data; return drv->do_request(drive, rq, block); diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 80ad4f234f3f..96f63eb12092 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -905,6 +905,14 @@ void ide_execute_pkt_cmd(ide_drive_t *drive) } EXPORT_SYMBOL_GPL(ide_execute_pkt_cmd); +static inline void ide_complete_drive_reset(ide_drive_t *drive) +{ + struct request *rq = drive->hwif->hwgroup->rq; + + if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) + ide_end_request(drive, 1, 0); +} + /* needed below */ static ide_startstop_t do_reset1 (ide_drive_t *, int); @@ -940,7 +948,7 @@ static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive) } /* done polling */ hwgroup->polling = 0; - hwgroup->resetting = 0; + ide_complete_drive_reset(drive); return ide_stopped; } @@ -961,7 +969,7 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) if (port_ops->reset_poll(drive)) { printk(KERN_ERR "%s: host reset_poll failure for %s.\n", hwif->name, drive->name); - return ide_stopped; + goto out; } } @@ -1004,7 +1012,8 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) } } hwgroup->polling = 0; /* done polling */ - hwgroup->resetting = 0; /* done reset attempt */ +out: + ide_complete_drive_reset(drive); return ide_stopped; } @@ -1090,7 +1099,6 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) /* For an ATAPI device, first try an ATAPI SRST. */ if (drive->media != ide_disk && !do_not_try_atapi) { - hwgroup->resetting = 1; pre_reset(drive); SELECT_DRIVE(drive); udelay (20); @@ -1112,10 +1120,10 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) if (io_ports->ctl_addr == 0) { spin_unlock_irqrestore(&ide_lock, flags); + ide_complete_drive_reset(drive); return ide_stopped; } - hwgroup->resetting = 1; /* * Note that we also set nIEN while resetting the device, * to mask unwanted interrupts from the interface during the reset. diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 90ae00d4aaf5..1ec983b00511 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -529,6 +529,19 @@ static int generic_ide_resume(struct device *dev) return err; } +static void generic_drive_reset(ide_drive_t *drive) +{ + struct request *rq; + + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_len = 1; + rq->cmd[0] = REQ_DRIVE_RESET; + rq->cmd_flags |= REQ_SOFTBARRIER; + blk_execute_rq(drive->queue, NULL, rq, 1); + blk_put_request(rq); +} + int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev, unsigned int cmd, unsigned long arg) { @@ -603,33 +616,9 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device if (!capable(CAP_SYS_ADMIN)) return -EACCES; - /* - * Abort the current command on the - * group if there is one, taking - * care not to allow anything else - * to be queued and to die on the - * spot if we miss one somehow - */ - - spin_lock_irqsave(&ide_lock, flags); - - if (HWGROUP(drive)->resetting) { - spin_unlock_irqrestore(&ide_lock, flags); - return -EBUSY; - } - - ide_abort(drive, "drive reset"); - - BUG_ON(HWGROUP(drive)->handler); - - /* Ensure nothing gets queued after we - drop the lock. Reset will clear the busy */ - - HWGROUP(drive)->busy = 1; - spin_unlock_irqrestore(&ide_lock, flags); - (void) ide_do_reset(drive); - + generic_drive_reset(drive); return 0; + case HDIO_GET_BUSSTATE: if (!capable(CAP_SYS_ADMIN)) return -EACCES; -- cgit v1.2.2 From 3ef5eb424ebf0cd981192a416358fd707a9f959b Mon Sep 17 00:00:00 2001 From: Elias Oltmanns Date: Wed, 16 Jul 2008 20:33:48 +0200 Subject: IDE: Remove unused code Remove some code which has been made obsolete and hasn't worked properly before anyway. Part of the infrastructure may be reintroduced in a follow up patch to implement a working command aborting facility. Signed-off-by: Elias Oltmanns Cc: "Alan Cox" Cc: "Randy Dunlap" Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 1 - drivers/ide/ide-disk.c | 1 - drivers/ide/ide-floppy.c | 1 - drivers/ide/ide-io.c | 49 ------------------------------------------------ drivers/ide/ide-tape.c | 1 - drivers/scsi/ide-scsi.c | 14 -------------- 6 files changed, 67 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 2b3c69d1f53f..6e29dd532090 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1952,7 +1952,6 @@ static ide_driver_t ide_cdrom_driver = { .do_request = ide_cd_do_request, .end_request = ide_end_request, .error = __ide_error, - .abort = __ide_abort, #ifdef CONFIG_IDE_PROC_FS .proc = idecd_proc, #endif diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 5f49a4ae9dd8..3a2e80237c10 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -985,7 +985,6 @@ static ide_driver_t idedisk_driver = { .do_request = ide_do_rw_disk, .end_request = ide_end_request, .error = __ide_error, - .abort = __ide_abort, #ifdef CONFIG_IDE_PROC_FS .proc = idedisk_proc, #endif diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index c7e4433fcbcf..011d72011cc4 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -1129,7 +1129,6 @@ static ide_driver_t idefloppy_driver = { .do_request = idefloppy_do_request, .end_request = idefloppy_end_request, .error = __ide_error, - .abort = __ide_abort, #ifdef CONFIG_IDE_PROC_FS .proc = idefloppy_proc, #endif diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 2b33c129740b..661b75a89d4d 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -504,55 +504,6 @@ ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, u8 stat) EXPORT_SYMBOL_GPL(ide_error); -ide_startstop_t __ide_abort(ide_drive_t *drive, struct request *rq) -{ - if (drive->media != ide_disk) - rq->errors |= ERROR_RESET; - - ide_kill_rq(drive, rq); - - return ide_stopped; -} - -EXPORT_SYMBOL_GPL(__ide_abort); - -/** - * ide_abort - abort pending IDE operations - * @drive: drive the error occurred on - * @msg: message to report - * - * ide_abort kills and cleans up when we are about to do a - * host initiated reset on active commands. Longer term we - * want handlers to have sensible abort handling themselves - * - * This differs fundamentally from ide_error because in - * this case the command is doing just fine when we - * blow it away. - */ - -ide_startstop_t ide_abort(ide_drive_t *drive, const char *msg) -{ - struct request *rq; - - if (drive == NULL || (rq = HWGROUP(drive)->rq) == NULL) - return ide_stopped; - - /* retry only "normal" I/O: */ - if (!blk_fs_request(rq)) { - rq->errors = 1; - ide_end_drive_cmd(drive, BUSY_STAT, 0); - return ide_stopped; - } - - if (rq->rq_disk) { - ide_driver_t *drv; - - drv = *(ide_driver_t **)rq->rq_disk->private_data; - return drv->abort(drive, rq); - } else - return __ide_abort(drive, rq); -} - static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf) { tf->nsect = drive->sect; diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index f9cf1670e4e1..b711ab96e287 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -2591,7 +2591,6 @@ static ide_driver_t idetape_driver = { .do_request = idetape_do_request, .end_request = idetape_end_request, .error = __ide_error, - .abort = __ide_abort, #ifdef CONFIG_IDE_PROC_FS .proc = idetape_proc, #endif diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 683bce375c74..f843c1383a4b 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -258,19 +258,6 @@ idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) return ide_stopped; } -static ide_startstop_t -idescsi_atapi_abort(ide_drive_t *drive, struct request *rq) -{ - debug_log("%s called for %lu\n", __func__, - ((struct ide_atapi_pc *) rq->special)->scsi_cmd->serial_number); - - rq->errors |= ERROR_MAX; - - idescsi_end_request(drive, 0, 0); - - return ide_stopped; -} - static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); @@ -524,7 +511,6 @@ static ide_driver_t idescsi_driver = { .do_request = idescsi_do_request, .end_request = idescsi_end_request, .error = idescsi_atapi_error, - .abort = idescsi_atapi_abort, #ifdef CONFIG_IDE_PROC_FS .proc = idescsi_proc, #endif -- cgit v1.2.2 From 64a8f00ff19508b3962c8a932375dbae88bee4d6 Mon Sep 17 00:00:00 2001 From: Elias Oltmanns Date: Wed, 16 Jul 2008 20:33:48 +0200 Subject: IDE: Report errors during drive reset back to user space Make sure that each error condition during the execution of an HDIO_DRIVE_RESET ioctl is actually reported to the calling process. Also, unify the exit path of reset_pollfunc() when returning ide_stopped since the need of ->port_ops->reset_poll() to be treated specially has vanished (way back, it seems). Signed-off-by: Elias Oltmanns Cc: "Alan Cox" Cc: "Randy Dunlap" Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 18 +++++++++++------- drivers/ide/ide.c | 10 ++++++---- drivers/ide/pci/siimage.c | 3 +-- 3 files changed, 18 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 96f63eb12092..44aaec256a30 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -905,12 +905,12 @@ void ide_execute_pkt_cmd(ide_drive_t *drive) } EXPORT_SYMBOL_GPL(ide_execute_pkt_cmd); -static inline void ide_complete_drive_reset(ide_drive_t *drive) +static inline void ide_complete_drive_reset(ide_drive_t *drive, int err) { struct request *rq = drive->hwif->hwgroup->rq; if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) - ide_end_request(drive, 1, 0); + ide_end_request(drive, err ? err : 1, 0); } /* needed below */ @@ -948,7 +948,7 @@ static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive) } /* done polling */ hwgroup->polling = 0; - ide_complete_drive_reset(drive); + ide_complete_drive_reset(drive, 0); return ide_stopped; } @@ -964,9 +964,11 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) ide_hwif_t *hwif = HWIF(drive); const struct ide_port_ops *port_ops = hwif->port_ops; u8 tmp; + int err = 0; if (port_ops && port_ops->reset_poll) { - if (port_ops->reset_poll(drive)) { + err = port_ops->reset_poll(drive); + if (err) { printk(KERN_ERR "%s: host reset_poll failure for %s.\n", hwif->name, drive->name); goto out; @@ -983,6 +985,7 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) } printk("%s: reset timed-out, status=0x%02x\n", hwif->name, tmp); drive->failures++; + err = -EIO; } else { printk("%s: reset: ", hwif->name); tmp = ide_read_error(drive); @@ -1009,11 +1012,12 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) if (tmp & 0x80) printk("; slave: failed"); printk("\n"); + err = -EIO; } } - hwgroup->polling = 0; /* done polling */ out: - ide_complete_drive_reset(drive); + hwgroup->polling = 0; /* done polling */ + ide_complete_drive_reset(drive, err); return ide_stopped; } @@ -1120,7 +1124,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) if (io_ports->ctl_addr == 0) { spin_unlock_irqrestore(&ide_lock, flags); - ide_complete_drive_reset(drive); + ide_complete_drive_reset(drive, -ENXIO); return ide_stopped; } diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 1ec983b00511..d4a6b102a772 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -529,17 +529,20 @@ static int generic_ide_resume(struct device *dev) return err; } -static void generic_drive_reset(ide_drive_t *drive) +static int generic_drive_reset(ide_drive_t *drive) { struct request *rq; + int ret = 0; rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd_len = 1; rq->cmd[0] = REQ_DRIVE_RESET; rq->cmd_flags |= REQ_SOFTBARRIER; - blk_execute_rq(drive->queue, NULL, rq, 1); + if (blk_execute_rq(drive->queue, NULL, rq, 1)) + ret = rq->errors; blk_put_request(rq); + return ret; } int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev, @@ -616,8 +619,7 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device if (!capable(CAP_SYS_ADMIN)) return -EACCES; - generic_drive_reset(drive); - return 0; + return generic_drive_reset(drive); case HDIO_GET_BUSSTATE: if (!capable(CAP_SYS_ADMIN)) diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index b75e9bb390a7..6e9d7655d89c 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -421,8 +421,7 @@ static int sil_sata_reset_poll(ide_drive_t *drive) if ((sata_stat & 0x03) != 0x03) { printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n", hwif->name, sata_stat); - HWGROUP(drive)->polling = 0; - return ide_started; + return -ENXIO; } } -- cgit v1.2.2