From 3e7d83bc96d59013792e5546e7832668d3adbce7 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 21 Apr 2005 17:10:36 -0700 Subject: [TG3]: Add GPIO3 for 5752 Add bit definitions for the new GPIO3 in 5752. GPIO3 must be driven as output when it is unused. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 10 ++++++++++ drivers/net/tg3.h | 3 +++ 2 files changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index a4d0d61d6af0..a94631af21cd 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -5353,6 +5353,11 @@ static int tg3_reset_hw(struct tg3 *tp) gpio_mask = GRC_LCLCTRL_GPIO_OE0 | GRC_LCLCTRL_GPIO_OE2 | GRC_LCLCTRL_GPIO_OUTPUT0 | GRC_LCLCTRL_GPIO_OUTPUT2; + + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752) + gpio_mask |= GRC_LCLCTRL_GPIO_OE3 | + GRC_LCLCTRL_GPIO_OUTPUT3; + tp->grc_local_ctrl |= tr32(GRC_LOCAL_CTRL) & gpio_mask; /* GPIO1 must be driven high for eeprom write protect */ @@ -8077,6 +8082,11 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT)) tp->grc_local_ctrl |= (GRC_LCLCTRL_GPIO_OE1 | GRC_LCLCTRL_GPIO_OUTPUT1); + /* Unused GPIO3 must be driven as output on 5752 because there + * are no pull-up resistors on unused GPIO pins. + */ + else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752) + tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE3; /* Force the chip into D0. */ err = tg3_set_power_state(tp, 0); diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 3f7cd6fb8891..548f469e9500 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -1311,6 +1311,9 @@ #define GRC_LCLCTRL_CLEARINT 0x00000002 #define GRC_LCLCTRL_SETINT 0x00000004 #define GRC_LCLCTRL_INT_ON_ATTN 0x00000008 +#define GRC_LCLCTRL_GPIO_INPUT3 0x00000020 +#define GRC_LCLCTRL_GPIO_OE3 0x00000040 +#define GRC_LCLCTRL_GPIO_OUTPUT3 0x00000080 #define GRC_LCLCTRL_GPIO_INPUT0 0x00000100 #define GRC_LCLCTRL_GPIO_INPUT1 0x00000200 #define GRC_LCLCTRL_GPIO_INPUT2 0x00000400 -- cgit v1.2.2