From 3ab7efe8e2cbcca2d401b43cfcc2fa9a7dac2299 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 12 Dec 2007 23:31:58 +0100 Subject: ide: DMA reporting and validity checking fixes (take 3) * ide_xfer_verbose() fixups: - beautify returned mode names - fix PIO5 reporting - make it return 'const char *' * Change printk() level from KERN_DEBUG to KERN_INFO in ide_find_dma_mode(). * Add ide_id_dma_bug() helper based on ide_dma_verbose() to check for invalid DMA info in identify block. * Use ide_id_dma_bug() in ide_tune_dma() and ide_driveid_update(). As a result DMA won't be tuned or will be disabled after tuning if device reports inconsistent info about enabled DMA mode (ide_dma_verbose() does the same checks while the IDE device is probed by ide-{cd,disk} device driver). * Remove no longer needed ide_dma_verbose(). This patch should fix the following problem with out-of-sync IDE messages reported by Nick Warne: hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache<7>hdd: skipping word 93 validity check , UDMA(66) and later debugged by Mark Lord to be caused by: ide_dma_verbose() printk( ... "2048kB Cache"); eighty_ninty_three() printk(KERN_DEBUG "%s: skipping word 93 validity check\n"); ide_dma_verbose() printk(", UDMA(66)" Please note that as a result ide-{cd,disk} device drivers won't report the DMA speed used but this is intended since now DMA mode being used is always reported by IDE core code. v2: * fixes suggested by Randy: - use KERN_CONT for printk()-s in ide-{cd,disk}.c - don't remove argument name from ide_xfer_verbose() declaration v3: * Remove incorrect check for (id->field_valid & 1) from ide_id_dma_bug() (spotted by Sergei). * "XFER SLOW" -> "PIO SLOW" in ide_xfer_verbose() (suggested by Sergei). * Fix ide_find_dma_mode() to report the correct mode ('mode' after being limited by 'req_mode'). Cc: Sergei Shtylyov Cc: Nick Warne Cc: Mark Lord Cc: Randy Dunlap Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 7 +----- drivers/ide/ide-disk.c | 7 ++---- drivers/ide/ide-dma.c | 60 +++++++++++++------------------------------------- drivers/ide/ide-iops.c | 3 +++ drivers/ide/ide-lib.c | 55 +++++++++++++++++++++++---------------------- 5 files changed, 50 insertions(+), 82 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 57a5f63d6ae3..db9abd83d959 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -3049,12 +3049,7 @@ int ide_cdrom_probe_capabilities (ide_drive_t *drive) else printk(" drive"); - printk(", %dkB Cache", be16_to_cpu(cap.buffer_size)); - - if (drive->using_dma) - ide_dma_verbose(drive); - - printk("\n"); + printk(KERN_CONT ", %dkB Cache\n", be16_to_cpu(cap.buffer_size)); return nslots; } diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 00123d99527a..b77c849cdd28 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -961,11 +961,8 @@ static void idedisk_setup (ide_drive_t *drive) if (id->buf_size) printk (" w/%dKiB Cache", id->buf_size/2); - printk(", CHS=%d/%d/%d", - drive->bios_cyl, drive->bios_head, drive->bios_sect); - if (drive->using_dma) - ide_dma_verbose(drive); - printk("\n"); + printk(KERN_CONT ", CHS=%d/%d/%d\n", + drive->bios_cyl, drive->bios_head, drive->bios_sect); /* write cache enabled? */ if ((id->csfo & 1) || (id->cfs_enable_1 & (1 << 5))) diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 0d795a1678c7..6879aaae544d 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -753,10 +753,12 @@ u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode) mode = XFER_MW_DMA_1; } - printk(KERN_DEBUG "%s: %s mode selected\n", drive->name, + mode = min(mode, req_mode); + + printk(KERN_INFO "%s: %s mode selected\n", drive->name, mode ? ide_xfer_verbose(mode) : "no DMA"); - return min(mode, req_mode); + return mode; } EXPORT_SYMBOL_GPL(ide_find_dma_mode); @@ -772,6 +774,9 @@ static int ide_tune_dma(ide_drive_t *drive) if (__ide_dma_bad_drive(drive)) return 0; + if (ide_id_dma_bug(drive)) + return 0; + if (drive->hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA) return config_drive_for_dma(drive); @@ -806,58 +811,23 @@ static int ide_dma_check(ide_drive_t *drive) return vdma ? 0 : -1; } -void ide_dma_verbose(ide_drive_t *drive) +int ide_id_dma_bug(ide_drive_t *drive) { - struct hd_driveid *id = drive->id; - ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; if (id->field_valid & 4) { if ((id->dma_ultra >> 8) && (id->dma_mword >> 8)) - goto bug_dma_off; - if (id->dma_ultra & ((id->dma_ultra >> 8) & hwif->ultra_mask)) { - if (((id->dma_ultra >> 11) & 0x1F) && - eighty_ninty_three(drive)) { - if ((id->dma_ultra >> 15) & 1) { - printk(", UDMA(mode 7)"); - } else if ((id->dma_ultra >> 14) & 1) { - printk(", UDMA(133)"); - } else if ((id->dma_ultra >> 13) & 1) { - printk(", UDMA(100)"); - } else if ((id->dma_ultra >> 12) & 1) { - printk(", UDMA(66)"); - } else if ((id->dma_ultra >> 11) & 1) { - printk(", UDMA(44)"); - } else - goto mode_two; - } else { - mode_two: - if ((id->dma_ultra >> 10) & 1) { - printk(", UDMA(33)"); - } else if ((id->dma_ultra >> 9) & 1) { - printk(", UDMA(25)"); - } else if ((id->dma_ultra >> 8) & 1) { - printk(", UDMA(16)"); - } - } - } else { - printk(", (U)DMA"); /* Can be BIOS-enabled! */ - } + goto err_out; } else if (id->field_valid & 2) { if ((id->dma_mword >> 8) && (id->dma_1word >> 8)) - goto bug_dma_off; - printk(", DMA"); - } else if (id->field_valid & 1) { - goto bug_dma_off; + goto err_out; } - return; -bug_dma_off: - printk(", BUG DMA OFF"); - hwif->dma_off_quietly(drive); - return; + return 0; +err_out: + printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name); + return 1; } -EXPORT_SYMBOL(ide_dma_verbose); - int ide_set_dma(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 5c3256180ae5..cef405ddaf0e 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -748,6 +748,9 @@ int ide_driveid_update(ide_drive_t *drive) drive->id->dma_1word = id->dma_1word; /* anything more ? */ kfree(id); + + if (drive->using_dma && ide_id_dma_bug(drive)) + ide_dma_off(drive); } return 1; diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 1609b8604f56..062d3bcb2471 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -29,41 +29,44 @@ * Add common non I/O op stuff here. Make sure it has proper * kernel-doc function headers or your patch will be rejected */ - + +static const char *udma_str[] = + { "UDMA/16", "UDMA/25", "UDMA/33", "UDMA/44", + "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" }; +static const char *mwdma_str[] = + { "MWDMA0", "MWDMA1", "MWDMA2" }; +static const char *swdma_str[] = + { "SWDMA0", "SWDMA1", "SWDMA2" }; +static const char *pio_str[] = + { "PIO0", "PIO1", "PIO2", "PIO3", "PIO4", "PIO5" }; /** * ide_xfer_verbose - return IDE mode names - * @xfer_rate: rate to name + * @mode: transfer mode * * Returns a constant string giving the name of the mode * requested. */ -char *ide_xfer_verbose (u8 xfer_rate) +const char *ide_xfer_verbose(u8 mode) { - switch(xfer_rate) { - case XFER_UDMA_7: return("UDMA 7"); - case XFER_UDMA_6: return("UDMA 6"); - case XFER_UDMA_5: return("UDMA 5"); - case XFER_UDMA_4: return("UDMA 4"); - case XFER_UDMA_3: return("UDMA 3"); - case XFER_UDMA_2: return("UDMA 2"); - case XFER_UDMA_1: return("UDMA 1"); - case XFER_UDMA_0: return("UDMA 0"); - case XFER_MW_DMA_2: return("MW DMA 2"); - case XFER_MW_DMA_1: return("MW DMA 1"); - case XFER_MW_DMA_0: return("MW DMA 0"); - case XFER_SW_DMA_2: return("SW DMA 2"); - case XFER_SW_DMA_1: return("SW DMA 1"); - case XFER_SW_DMA_0: return("SW DMA 0"); - case XFER_PIO_4: return("PIO 4"); - case XFER_PIO_3: return("PIO 3"); - case XFER_PIO_2: return("PIO 2"); - case XFER_PIO_1: return("PIO 1"); - case XFER_PIO_0: return("PIO 0"); - case XFER_PIO_SLOW: return("PIO SLOW"); - default: return("XFER ERROR"); - } + const char *s; + u8 i = mode & 0xf; + + if (mode >= XFER_UDMA_0 && mode <= XFER_UDMA_7) + s = udma_str[i]; + else if (mode >= XFER_MW_DMA_0 && mode <= XFER_MW_DMA_2) + s = mwdma_str[i]; + else if (mode >= XFER_SW_DMA_0 && mode <= XFER_SW_DMA_2) + s = swdma_str[i]; + else if (mode >= XFER_PIO_0 && mode <= XFER_PIO_5) + s = pio_str[i & 0x7]; + else if (mode == XFER_PIO_SLOW) + s = "PIO SLOW"; + else + s = "XFER ERROR"; + + return s; } EXPORT_SYMBOL(ide_xfer_verbose); -- cgit v1.2.2