From f5695a39833a2946479f6215f3afc4f672333713 Mon Sep 17 00:00:00 2001 From: "Rajanikanth H.V" Date: Thu, 29 Nov 2012 00:57:45 +0530 Subject: ab8500: remove explicit handling of battery type property, battery-type shall be one of supported technology type instead blank - refer: Documentation/devicetree/bindings/power_supply/ab8500/fg.txt for the list supported types - this patch appends to ab8500 bm devs DT binding patch set ref: commit-id e0f1abeba5c2d8a2183566717d99294fd1a29c2e git://git.infradead.org/battery-2.6.git - promote ab8500_fg probe to happen before ab8500_btemp probe as btemp driver depends on fuelgauge list, ref: ab8500_fg_get(...) Signed-off-by: Rajanikanth H.V --- drivers/power/Makefile | 2 +- drivers/power/ab8500_bmdata.c | 10 +++------- 2 files changed, 4 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 696e3a960b3e..070c73d2ef02 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -38,7 +38,7 @@ obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o obj-$(CONFIG_BATTERY_RX51) += rx51_battery.o -obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_btemp.o ab8500_fg.o abx500_chargalg.o +obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c index 03cc528425cb..f16b60cd67de 100644 --- a/drivers/power/ab8500_bmdata.c +++ b/drivers/power/ab8500_bmdata.c @@ -461,7 +461,6 @@ bmdevs_of_probe(struct device *dev, struct device_node *np_bat_supply; struct abx500_bm_data *bat; const char *btech; - char bat_tech[8]; int i, thermistor; *battery = &ab8500_bm_data; @@ -488,12 +487,9 @@ bmdevs_of_probe(struct device *dev, "stericsson,battery-type", NULL); if (!btech) { dev_warn(dev, "missing property battery-name/type\n"); - strcpy(bat_tech, "UNKNOWN"); - } else { - strcpy(bat_tech, btech); + return -EINVAL; } - - if (strncmp(bat_tech, "LION", 4) == 0) { + if (strncmp(btech, "LION", 4) == 0) { bat->no_maintenance = true; bat->chg_unknown_bat = true; bat->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600; @@ -508,7 +504,7 @@ bmdevs_of_probe(struct device *dev, if (thermistor == NTC_EXTERNAL) { btype->batres_tbl = temp_to_batres_tbl_ext_thermistor; - } else if (strncmp(bat_tech, "LION", 4) == 0) { + } else if (strncmp(btech, "LION", 4) == 0) { btype->batres_tbl = temp_to_batres_tbl_9100; } else { -- cgit v1.2.2 From f8e96dff240982c1433d447bae533acc36b5cf8f Mon Sep 17 00:00:00 2001 From: Johan Bjornstedt Date: Wed, 18 Jan 2012 12:44:55 +0100 Subject: ab8500_charger: Charger current step-up/down There is no state machine in the AB to step up/down the charger current to avoid dips and spikes on VBUS and VBAT when charging is started. Instead this is implemented in SW. Signed-off-by: Johan Bjornstedt Signed-off-by: Mattias Wallin Signed-off-by: Lee Jones Reviewed-by: Karl KOMIEROWSKI --- drivers/power/ab8500_charger.c | 175 +++++++++++++++++++++++++++++++---------- 1 file changed, 135 insertions(+), 40 deletions(-) (limited to 'drivers') diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c index dddc9473f72a..d27dd7fec163 100644 --- a/drivers/power/ab8500_charger.c +++ b/drivers/power/ab8500_charger.c @@ -79,6 +79,9 @@ /* Lowest charger voltage is 3.39V -> 0x4E */ #define LOW_VOLT_REG 0x4E +/* Step up/down delay in us */ +#define STEP_UDELAY 1000 + /* UsbLineStatus register - usb types */ enum ab8500_charger_link_status { USB_STAT_NOT_CONFIGURED, @@ -935,6 +938,88 @@ static int ab8500_charger_get_usb_cur(struct ab8500_charger *di) return 0; } +/** + * ab8500_charger_set_current() - set charger current + * @di: pointer to the ab8500_charger structure + * @ich: charger current, in mA + * @reg: select what charger register to set + * + * Set charger current. + * There is no state machine in the AB to step up/down the charger + * current to avoid dips and spikes on MAIN, VBUS and VBAT when + * charging is started. Instead we need to implement + * this charger current step-up/down here. + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_set_current(struct ab8500_charger *di, + int ich, int reg) +{ + int ret, i; + int curr_index, prev_curr_index, shift_value; + u8 reg_value; + + switch (reg) { + case AB8500_MCH_IPT_CURLVL_REG: + shift_value = MAIN_CH_INPUT_CURR_SHIFT; + curr_index = ab8500_current_to_regval(ich); + break; + case AB8500_USBCH_IPT_CRNTLVL_REG: + shift_value = VBUS_IN_CURR_LIM_SHIFT; + curr_index = ab8500_vbus_in_curr_to_regval(ich); + break; + case AB8500_CH_OPT_CRNTLVL_REG: + shift_value = 0; + curr_index = ab8500_current_to_regval(ich); + break; + default: + dev_err(di->dev, "%s current register not valid\n", __func__); + return -ENXIO; + } + + if (curr_index < 0) { + dev_err(di->dev, "requested current limit out-of-range\n"); + return -ENXIO; + } + + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + reg, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s read failed\n", __func__); + return ret; + } + prev_curr_index = (reg_value >> shift_value); + + /* only update current if it's been changed */ + if (prev_curr_index == curr_index) + return 0; + + dev_dbg(di->dev, "%s set charger current: %d mA for reg: 0x%02x\n", + __func__, ich, reg); + + if (prev_curr_index > curr_index) { + for (i = prev_curr_index - 1; i >= curr_index; i--) { + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, reg, (u8) i << shift_value); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + usleep_range(STEP_UDELAY, STEP_UDELAY * 2); + } + } else { + for (i = prev_curr_index + 1; i <= curr_index; i++) { + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, reg, (u8) i << shift_value); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + usleep_range(STEP_UDELAY, STEP_UDELAY * 2); + } + } + return ret; +} + /** * ab8500_charger_set_vbus_in_curr() - set VBUS input current limit * @di: pointer to the ab8500_charger structure @@ -946,8 +1031,6 @@ static int ab8500_charger_get_usb_cur(struct ab8500_charger *di) static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di, int ich_in) { - int ret; - int input_curr_index; int min_value; /* We should always use to lowest current limit */ @@ -966,19 +1049,38 @@ static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di, break; } - input_curr_index = ab8500_vbus_in_curr_to_regval(min_value); - if (input_curr_index < 0) { - dev_err(di->dev, "VBUS input current limit too high\n"); - return -ENXIO; - } + return ab8500_charger_set_current(di, min_value, + AB8500_USBCH_IPT_CRNTLVL_REG); +} - ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, - AB8500_USBCH_IPT_CRNTLVL_REG, - input_curr_index << VBUS_IN_CURR_LIM_SHIFT); - if (ret) - dev_err(di->dev, "%s write failed\n", __func__); +/** + * ab8500_charger_set_main_in_curr() - set main charger input current + * @di: pointer to the ab8500_charger structure + * @ich_in: input charger current, in mA + * + * Set main charger input current. + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_set_main_in_curr(struct ab8500_charger *di, + int ich_in) +{ + return ab8500_charger_set_current(di, ich_in, + AB8500_MCH_IPT_CURLVL_REG); +} - return ret; +/** + * ab8500_charger_set_output_curr() - set charger output current + * @di: pointer to the ab8500_charger structure + * @ich_out: output charger current, in mA + * + * Set charger output current. + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_set_output_curr(struct ab8500_charger *di, + int ich_out) +{ + return ab8500_charger_set_current(di, ich_out, + AB8500_CH_OPT_CRNTLVL_REG); } /** @@ -1090,18 +1192,19 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger, return ret; } /* MainChInputCurr: current that can be drawn from the charger*/ - ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, - AB8500_MCH_IPT_CURLVL_REG, - input_curr_index << MAIN_CH_INPUT_CURR_SHIFT); + ret = ab8500_charger_set_main_in_curr(di, + di->bat->chg_params->ac_curr_max); if (ret) { - dev_err(di->dev, "%s write failed\n", __func__); + dev_err(di->dev, "%s Failed to set MainChInputCurr\n", + __func__); return ret; } /* ChOutputCurentLevel: protected output current */ - ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, - AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index); + ret = ab8500_charger_set_output_curr(di, iset); if (ret) { - dev_err(di->dev, "%s write failed\n", __func__); + dev_err(di->dev, "%s " + "Failed to set ChOutputCurentLevel\n", + __func__); return ret; } @@ -1158,12 +1261,11 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger, return ret; } - ret = abx500_set_register_interruptible(di->dev, - AB8500_CHARGER, - AB8500_CH_OPT_CRNTLVL_REG, CH_OP_CUR_LVL_0P1); + ret = ab8500_charger_set_output_curr(di, 0); if (ret) { - dev_err(di->dev, - "%s write failed\n", __func__); + dev_err(di->dev, "%s " + "Failed to set ChOutputCurentLevel\n", + __func__); return ret; } } else { @@ -1266,10 +1368,11 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger, return ret; } /* ChOutputCurentLevel: protected output current */ - ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, - AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index); + ret = ab8500_charger_set_output_curr(di, ich_out); if (ret) { - dev_err(di->dev, "%s write failed\n", __func__); + dev_err(di->dev, "%s " + "Failed to set ChOutputCurentLevel\n", + __func__); return ret; } /* Check if VBAT overshoot control should be enabled */ @@ -1366,7 +1469,6 @@ static int ab8500_charger_update_charger_current(struct ux500_charger *charger, int ich_out) { int ret; - int curr_index; struct ab8500_charger *di; if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS) @@ -1376,18 +1478,11 @@ static int ab8500_charger_update_charger_current(struct ux500_charger *charger, else return -ENXIO; - curr_index = ab8500_current_to_regval(ich_out); - if (curr_index < 0) { - dev_err(di->dev, - "Charger current too high, " - "charging not started\n"); - return -ENXIO; - } - - ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, - AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index); + ret = ab8500_charger_set_output_curr(di, ich_out); if (ret) { - dev_err(di->dev, "%s write failed\n", __func__); + dev_err(di->dev, "%s " + "Failed to set ChOutputCurentLevel\n", + __func__); return ret; } -- cgit v1.2.2 From e32ad07cea1f198db1cc6c2055dd8471b562a535 Mon Sep 17 00:00:00 2001 From: Kalle Komierowski Date: Thu, 2 Feb 2012 16:05:46 +0100 Subject: ab8500_fg: Don't clear the CCMuxOffset bit The CCMuxOffset bit is not kept set. This will force the columb counter of the AB8500 to use the measure offset calibration. This should increase the accuracy of the fuel gauge. Signed-off-by: Kalle Komierowski Signed-off-by: Marcus Cooper Signed-off-by: Lee Jones Reviewed-by: Jonas ABERG --- drivers/power/ab8500_fg.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c index ed62ef788eb5..5a9f58d4c0fb 100644 --- a/drivers/power/ab8500_fg.c +++ b/drivers/power/ab8500_fg.c @@ -484,8 +484,9 @@ static int ab8500_fg_coulomb_counter(struct ab8500_fg *di, bool enable) di->flags.fg_enabled = true; } else { /* Clear any pending read requests */ - ret = abx500_set_register_interruptible(di->dev, - AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, 0); + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, + (RESET_ACCU | READ_REQ), 0); if (ret) goto cc_err; @@ -1403,8 +1404,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) sleep_time = di->bat->fg_params->init_timer; /* Discard the first [x] seconds */ - if (di->init_cnt > - di->bat->fg_params->init_discard_time) { + if (di->init_cnt > di->bat->fg_params->init_discard_time) { ab8500_fg_calc_cap_discharge_voltage(di, true); ab8500_fg_check_capacity_limits(di, true); -- cgit v1.2.2 From f6271b4fb1d5ce7d6cf2c84a96b56cca4ceca372 Mon Sep 17 00:00:00 2001 From: Jonas Aaberg Date: Mon, 27 Feb 2012 11:02:44 +0100 Subject: ab8500_btemp: Detect battery type in workqueue Detect battery type in work queue instead of probe. This reduces the system boot time with 1.5s. Signed-off-by: Jonas Aaberg Signed-off-by: Lee Jones Reviewed-by: Karl KOMIEROWSKI --- drivers/power/ab8500_btemp.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c index 8135542ee746..5d1bf0bd6fa5 100644 --- a/drivers/power/ab8500_btemp.c +++ b/drivers/power/ab8500_btemp.c @@ -84,6 +84,7 @@ struct ab8500_btemp_ranges { * @btemp_ranges: Battery temperature range structure * @btemp_wq: Work queue for measuring the temperature periodically * @btemp_periodic_work: Work for measuring the temperature periodically + * @initialized: True if battery id read. */ struct ab8500_btemp { struct device *dev; @@ -100,6 +101,7 @@ struct ab8500_btemp { struct ab8500_btemp_ranges btemp_ranges; struct workqueue_struct *btemp_wq; struct delayed_work btemp_periodic_work; + bool initialized; }; /* BTEMP power supply properties */ @@ -569,6 +571,13 @@ static void ab8500_btemp_periodic_work(struct work_struct *work) struct ab8500_btemp *di = container_of(work, struct ab8500_btemp, btemp_periodic_work.work); + if (!di->initialized) { + di->initialized = true; + /* Identify the battery */ + if (ab8500_btemp_id(di) < 0) + dev_warn(di->dev, "failed to identify the battery\n"); + } + di->bat_temp = ab8500_btemp_measure_temp(di); if (di->bat_temp != di->prev_bat_temp) { @@ -998,6 +1007,8 @@ static int __devinit ab8500_btemp_probe(struct platform_device *pdev) di->parent = dev_get_drvdata(pdev->dev.parent); di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + di->initialized = false; + /* BTEMP supply */ di->btemp_psy.name = "ab8500_btemp"; di->btemp_psy.type = POWER_SUPPLY_TYPE_BATTERY; @@ -1022,10 +1033,6 @@ static int __devinit ab8500_btemp_probe(struct platform_device *pdev) INIT_DEFERRABLE_WORK(&di->btemp_periodic_work, ab8500_btemp_periodic_work); - /* Identify the battery */ - if (ab8500_btemp_id(di) < 0) - dev_warn(di->dev, "failed to identify the battery\n"); - /* Set BTEMP thermal limits. Low and Med are fixed */ di->btemp_ranges.btemp_low_limit = BTEMP_THERMAL_LOW_LIMIT; di->btemp_ranges.btemp_med_limit = BTEMP_THERMAL_MED_LIMIT; -- cgit v1.2.2 From 43dc4470e3c8465b438676484280b6e4187b78e4 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 29 Nov 2012 15:26:22 +0000 Subject: ab8500_btemp: Fix crazy tabbing implementation Simple patch to rectify incorrect tabbing. Also adds some coding style clean-ups to make it easier to read. Signed-off-by: Lee Jones --- drivers/power/ab8500_bmdata.c | 457 +++++++++++++++++++++--------------------- 1 file changed, 229 insertions(+), 228 deletions(-) (limited to 'drivers') diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c index f16b60cd67de..2623b16b47d1 100644 --- a/drivers/power/ab8500_bmdata.c +++ b/drivers/power/ab8500_bmdata.c @@ -182,206 +182,206 @@ static struct batres_vs_temp temp_to_batres_tbl_9100[] = { }; static struct abx500_battery_type bat_type_thermistor[] = { -[BATTERY_UNKNOWN] = { - /* First element always represent the UNKNOWN battery */ - .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN, - .resis_high = 0, - .resis_low = 0, - .battery_resistance = 300, - .charge_full_design = 612, - .nominal_voltage = 3700, - .termination_vol = 4050, - .termination_curr = 200, - .recharge_vol = 3990, - .normal_cur_lvl = 400, - .normal_vol_lvl = 4100, - .maint_a_cur_lvl = 400, - .maint_a_vol_lvl = 4050, - .maint_a_chg_timer_h = 60, - .maint_b_cur_lvl = 400, - .maint_b_vol_lvl = 4000, - .maint_b_chg_timer_h = 200, - .low_high_cur_lvl = 300, - .low_high_vol_lvl = 4000, - .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), - .r_to_t_tbl = temp_tbl, - .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), - .v_to_cap_tbl = cap_tbl, - .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), - .batres_tbl = temp_to_batres_tbl_thermistor, -}, -{ - .name = POWER_SUPPLY_TECHNOLOGY_LIPO, - .resis_high = 53407, - .resis_low = 12500, - .battery_resistance = 300, - .charge_full_design = 900, - .nominal_voltage = 3600, - .termination_vol = 4150, - .termination_curr = 80, - .recharge_vol = 4130, - .normal_cur_lvl = 700, - .normal_vol_lvl = 4200, - .maint_a_cur_lvl = 600, - .maint_a_vol_lvl = 4150, - .maint_a_chg_timer_h = 60, - .maint_b_cur_lvl = 600, - .maint_b_vol_lvl = 4100, - .maint_b_chg_timer_h = 200, - .low_high_cur_lvl = 300, - .low_high_vol_lvl = 4000, - .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_A_thermistor), - .r_to_t_tbl = temp_tbl_A_thermistor, - .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_A_thermistor), - .v_to_cap_tbl = cap_tbl_A_thermistor, - .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), - .batres_tbl = temp_to_batres_tbl_thermistor, + [BATTERY_UNKNOWN] = { + /* First element always represent the UNKNOWN battery */ + .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN, + .resis_high = 0, + .resis_low = 0, + .battery_resistance = 300, + .charge_full_design = 612, + .nominal_voltage = 3700, + .termination_vol = 4050, + .termination_curr = 200, + .recharge_vol = 3990, + .normal_cur_lvl = 400, + .normal_vol_lvl = 4100, + .maint_a_cur_lvl = 400, + .maint_a_vol_lvl = 4050, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 400, + .maint_b_vol_lvl = 4000, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), + .r_to_t_tbl = temp_tbl, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), + .v_to_cap_tbl = cap_tbl, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, + }, + { + .name = POWER_SUPPLY_TECHNOLOGY_LIPO, + .resis_high = 53407, + .resis_low = 12500, + .battery_resistance = 300, + .charge_full_design = 900, + .nominal_voltage = 3600, + .termination_vol = 4150, + .termination_curr = 80, + .recharge_vol = 4130, + .normal_cur_lvl = 700, + .normal_vol_lvl = 4200, + .maint_a_cur_lvl = 600, + .maint_a_vol_lvl = 4150, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 600, + .maint_b_vol_lvl = 4100, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_A_thermistor), + .r_to_t_tbl = temp_tbl_A_thermistor, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_A_thermistor), + .v_to_cap_tbl = cap_tbl_A_thermistor, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, -}, -{ - .name = POWER_SUPPLY_TECHNOLOGY_LIPO, - .resis_high = 200000, - .resis_low = 82869, - .battery_resistance = 300, - .charge_full_design = 900, - .nominal_voltage = 3600, - .termination_vol = 4150, - .termination_curr = 80, - .recharge_vol = 4130, - .normal_cur_lvl = 700, - .normal_vol_lvl = 4200, - .maint_a_cur_lvl = 600, - .maint_a_vol_lvl = 4150, - .maint_a_chg_timer_h = 60, - .maint_b_cur_lvl = 600, - .maint_b_vol_lvl = 4100, - .maint_b_chg_timer_h = 200, - .low_high_cur_lvl = 300, - .low_high_vol_lvl = 4000, - .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_B_thermistor), - .r_to_t_tbl = temp_tbl_B_thermistor, - .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_B_thermistor), - .v_to_cap_tbl = cap_tbl_B_thermistor, - .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), - .batres_tbl = temp_to_batres_tbl_thermistor, -}, + }, + { + .name = POWER_SUPPLY_TECHNOLOGY_LIPO, + .resis_high = 200000, + .resis_low = 82869, + .battery_resistance = 300, + .charge_full_design = 900, + .nominal_voltage = 3600, + .termination_vol = 4150, + .termination_curr = 80, + .recharge_vol = 4130, + .normal_cur_lvl = 700, + .normal_vol_lvl = 4200, + .maint_a_cur_lvl = 600, + .maint_a_vol_lvl = 4150, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 600, + .maint_b_vol_lvl = 4100, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_B_thermistor), + .r_to_t_tbl = temp_tbl_B_thermistor, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_B_thermistor), + .v_to_cap_tbl = cap_tbl_B_thermistor, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, + }, }; static struct abx500_battery_type bat_type_ext_thermistor[] = { -[BATTERY_UNKNOWN] = { - /* First element always represent the UNKNOWN battery */ - .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN, - .resis_high = 0, - .resis_low = 0, - .battery_resistance = 300, - .charge_full_design = 612, - .nominal_voltage = 3700, - .termination_vol = 4050, - .termination_curr = 200, - .recharge_vol = 3990, - .normal_cur_lvl = 400, - .normal_vol_lvl = 4100, - .maint_a_cur_lvl = 400, - .maint_a_vol_lvl = 4050, - .maint_a_chg_timer_h = 60, - .maint_b_cur_lvl = 400, - .maint_b_vol_lvl = 4000, - .maint_b_chg_timer_h = 200, - .low_high_cur_lvl = 300, - .low_high_vol_lvl = 4000, - .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), - .r_to_t_tbl = temp_tbl, - .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), - .v_to_cap_tbl = cap_tbl, - .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), - .batres_tbl = temp_to_batres_tbl_thermistor, -}, + [BATTERY_UNKNOWN] = { + /* First element always represent the UNKNOWN battery */ + .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN, + .resis_high = 0, + .resis_low = 0, + .battery_resistance = 300, + .charge_full_design = 612, + .nominal_voltage = 3700, + .termination_vol = 4050, + .termination_curr = 200, + .recharge_vol = 3990, + .normal_cur_lvl = 400, + .normal_vol_lvl = 4100, + .maint_a_cur_lvl = 400, + .maint_a_vol_lvl = 4050, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 400, + .maint_b_vol_lvl = 4000, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), + .r_to_t_tbl = temp_tbl, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), + .v_to_cap_tbl = cap_tbl, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, + }, /* * These are the batteries that doesn't have an internal NTC resistor to measure * its temperature. The temperature in this case is measure with a NTC placed * near the battery but on the PCB. */ -{ - .name = POWER_SUPPLY_TECHNOLOGY_LIPO, - .resis_high = 76000, - .resis_low = 53000, - .battery_resistance = 300, - .charge_full_design = 900, - .nominal_voltage = 3700, - .termination_vol = 4150, - .termination_curr = 100, - .recharge_vol = 4130, - .normal_cur_lvl = 700, - .normal_vol_lvl = 4200, - .maint_a_cur_lvl = 600, - .maint_a_vol_lvl = 4150, - .maint_a_chg_timer_h = 60, - .maint_b_cur_lvl = 600, - .maint_b_vol_lvl = 4100, - .maint_b_chg_timer_h = 200, - .low_high_cur_lvl = 300, - .low_high_vol_lvl = 4000, - .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), - .r_to_t_tbl = temp_tbl, - .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), - .v_to_cap_tbl = cap_tbl, - .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), - .batres_tbl = temp_to_batres_tbl_thermistor, -}, -{ - .name = POWER_SUPPLY_TECHNOLOGY_LION, - .resis_high = 30000, - .resis_low = 10000, - .battery_resistance = 300, - .charge_full_design = 950, - .nominal_voltage = 3700, - .termination_vol = 4150, - .termination_curr = 100, - .recharge_vol = 4130, - .normal_cur_lvl = 700, - .normal_vol_lvl = 4200, - .maint_a_cur_lvl = 600, - .maint_a_vol_lvl = 4150, - .maint_a_chg_timer_h = 60, - .maint_b_cur_lvl = 600, - .maint_b_vol_lvl = 4100, - .maint_b_chg_timer_h = 200, - .low_high_cur_lvl = 300, - .low_high_vol_lvl = 4000, - .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), - .r_to_t_tbl = temp_tbl, - .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), - .v_to_cap_tbl = cap_tbl, - .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), - .batres_tbl = temp_to_batres_tbl_thermistor, -}, -{ - .name = POWER_SUPPLY_TECHNOLOGY_LION, - .resis_high = 95000, - .resis_low = 76001, - .battery_resistance = 300, - .charge_full_design = 950, - .nominal_voltage = 3700, - .termination_vol = 4150, - .termination_curr = 100, - .recharge_vol = 4130, - .normal_cur_lvl = 700, - .normal_vol_lvl = 4200, - .maint_a_cur_lvl = 600, - .maint_a_vol_lvl = 4150, - .maint_a_chg_timer_h = 60, - .maint_b_cur_lvl = 600, - .maint_b_vol_lvl = 4100, - .maint_b_chg_timer_h = 200, - .low_high_cur_lvl = 300, - .low_high_vol_lvl = 4000, - .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), - .r_to_t_tbl = temp_tbl, - .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), - .v_to_cap_tbl = cap_tbl, - .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), - .batres_tbl = temp_to_batres_tbl_thermistor, -}, + { + .name = POWER_SUPPLY_TECHNOLOGY_LIPO, + .resis_high = 76000, + .resis_low = 53000, + .battery_resistance = 300, + .charge_full_design = 900, + .nominal_voltage = 3700, + .termination_vol = 4150, + .termination_curr = 100, + .recharge_vol = 4130, + .normal_cur_lvl = 700, + .normal_vol_lvl = 4200, + .maint_a_cur_lvl = 600, + .maint_a_vol_lvl = 4150, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 600, + .maint_b_vol_lvl = 4100, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), + .r_to_t_tbl = temp_tbl, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), + .v_to_cap_tbl = cap_tbl, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, + }, + { + .name = POWER_SUPPLY_TECHNOLOGY_LION, + .resis_high = 30000, + .resis_low = 10000, + .battery_resistance = 300, + .charge_full_design = 950, + .nominal_voltage = 3700, + .termination_vol = 4150, + .termination_curr = 100, + .recharge_vol = 4130, + .normal_cur_lvl = 700, + .normal_vol_lvl = 4200, + .maint_a_cur_lvl = 600, + .maint_a_vol_lvl = 4150, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 600, + .maint_b_vol_lvl = 4100, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), + .r_to_t_tbl = temp_tbl, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), + .v_to_cap_tbl = cap_tbl, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, + }, + { + .name = POWER_SUPPLY_TECHNOLOGY_LION, + .resis_high = 95000, + .resis_low = 76001, + .battery_resistance = 300, + .charge_full_design = 950, + .nominal_voltage = 3700, + .termination_vol = 4150, + .termination_curr = 100, + .recharge_vol = 4130, + .normal_cur_lvl = 700, + .normal_vol_lvl = 4200, + .maint_a_cur_lvl = 600, + .maint_a_vol_lvl = 4150, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 600, + .maint_b_vol_lvl = 4100, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), + .r_to_t_tbl = temp_tbl, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), + .v_to_cap_tbl = cap_tbl, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, + }, }; static const struct abx500_bm_capacity_levels cap_levels = { @@ -424,42 +424,41 @@ static const struct abx500_bm_charger_parameters chg = { }; struct abx500_bm_data ab8500_bm_data = { - .temp_under = 3, - .temp_low = 8, - .temp_high = 43, - .temp_over = 48, - .main_safety_tmr_h = 4, - .temp_interval_chg = 20, - .temp_interval_nochg = 120, - .usb_safety_tmr_h = 4, - .bkup_bat_v = BUP_VCH_SEL_2P6V, - .bkup_bat_i = BUP_ICH_SEL_150UA, - .no_maintenance = false, - .adc_therm = ABx500_ADC_THERM_BATCTRL, - .chg_unknown_bat = false, - .enable_overshoot = false, - .fg_res = 100, - .cap_levels = &cap_levels, - .bat_type = bat_type_thermistor, - .n_btypes = 3, - .batt_id = 0, - .interval_charging = 5, - .interval_not_charging = 120, - .temp_hysteresis = 3, - .gnd_lift_resistance = 34, - .maxi = &maxi_params, - .chg_params = &chg, - .fg_params = &fg, + .temp_under = 3, + .temp_low = 8, + .temp_high = 43, + .temp_over = 48, + .main_safety_tmr_h = 4, + .temp_interval_chg = 20, + .temp_interval_nochg = 120, + .usb_safety_tmr_h = 4, + .bkup_bat_v = BUP_VCH_SEL_2P6V, + .bkup_bat_i = BUP_ICH_SEL_150UA, + .no_maintenance = false, + .adc_therm = ABx500_ADC_THERM_BATCTRL, + .chg_unknown_bat = false, + .enable_overshoot = false, + .fg_res = 100, + .cap_levels = &cap_levels, + .bat_type = bat_type_thermistor, + .n_btypes = 3, + .batt_id = 0, + .interval_charging = 5, + .interval_not_charging = 120, + .temp_hysteresis = 3, + .gnd_lift_resistance = 34, + .maxi = &maxi_params, + .chg_params = &chg, + .fg_params = &fg, }; -int __devinit -bmdevs_of_probe(struct device *dev, - struct device_node *np, - struct abx500_bm_data **battery) +int __devinit bmdevs_of_probe(struct device *dev, + struct device_node *np, + struct abx500_bm_data **battery) { - struct abx500_battery_type *btype; - struct device_node *np_bat_supply; - struct abx500_bm_data *bat; + struct abx500_battery_type *btype; + struct device_node *np_bat_supply; + struct abx500_bm_data *bat; const char *btech; int i, thermistor; @@ -471,8 +470,8 @@ bmdevs_of_probe(struct device *dev, dev_err(dev, "missing property battery\n"); return -EINVAL; } - if (of_property_read_bool(np_bat_supply, - "thermistor-on-batctrl")) + + if (of_property_read_bool(np_bat_supply, "thermistor-on-batctrl")) thermistor = NTC_INTERNAL; else thermistor = NTC_EXTERNAL; @@ -483,8 +482,8 @@ bmdevs_of_probe(struct device *dev, bat->bat_type = bat_type_ext_thermistor; bat->adc_therm = ABx500_ADC_THERM_BATTEMP; } - btech = of_get_property(np_bat_supply, - "stericsson,battery-type", NULL); + + btech = of_get_property(np_bat_supply, "stericsson,battery-type", NULL); if (!btech) { dev_warn(dev, "missing property battery-name/type\n"); return -EINVAL; @@ -498,6 +497,7 @@ bmdevs_of_probe(struct device *dev, bat->bat_type[BATTERY_UNKNOWN].normal_cur_lvl = 520; bat->bat_type[BATTERY_UNKNOWN].normal_vol_lvl = 4200; } + /* select the battery resolution table */ for (i = 0; i < bat->n_btypes; ++i) { btype = (bat->bat_type + i); @@ -513,5 +513,6 @@ bmdevs_of_probe(struct device *dev, } } of_node_put(np_bat_supply); + return 0; } -- cgit v1.2.2 From 8e3a71e56c8c48862015ecf1ae0b9362dc28a453 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 30 Nov 2012 09:16:40 +0000 Subject: ab8500-bmdata: Re-jiggle bmdevs_of_probe to be more succinct We can actually write bmdevs_of_probe to be easier to follow, use less lines of code and we can even render a variable unused so that we can remove it completely. Signed-off-by: Lee Jones --- drivers/power/ab8500_bmdata.c | 49 +++++++++++++++++++------------------------ 1 file changed, 21 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c index 2623b16b47d1..df5a590d760e 100644 --- a/drivers/power/ab8500_bmdata.c +++ b/drivers/power/ab8500_bmdata.c @@ -456,38 +456,29 @@ int __devinit bmdevs_of_probe(struct device *dev, struct device_node *np, struct abx500_bm_data **battery) { - struct abx500_battery_type *btype; + struct batres_vs_temp *tmp_batres_tbl; struct device_node *np_bat_supply; struct abx500_bm_data *bat; const char *btech; - int i, thermistor; + int i; *battery = &ab8500_bm_data; /* get phandle to 'battery-info' node */ np_bat_supply = of_parse_phandle(np, "battery", 0); if (!np_bat_supply) { - dev_err(dev, "missing property battery\n"); + dev_err(dev, "battery node or reference missing\n"); return -EINVAL; } - if (of_property_read_bool(np_bat_supply, "thermistor-on-batctrl")) - thermistor = NTC_INTERNAL; - else - thermistor = NTC_EXTERNAL; - - bat = *battery; - if (thermistor == NTC_EXTERNAL) { - bat->n_btypes = 4; - bat->bat_type = bat_type_ext_thermistor; - bat->adc_therm = ABx500_ADC_THERM_BATTEMP; - } - btech = of_get_property(np_bat_supply, "stericsson,battery-type", NULL); if (!btech) { dev_warn(dev, "missing property battery-name/type\n"); return -EINVAL; } + + bat = *battery; + if (strncmp(btech, "LION", 4) == 0) { bat->no_maintenance = true; bat->chg_unknown_bat = true; @@ -498,20 +489,22 @@ int __devinit bmdevs_of_probe(struct device *dev, bat->bat_type[BATTERY_UNKNOWN].normal_vol_lvl = 4200; } - /* select the battery resolution table */ - for (i = 0; i < bat->n_btypes; ++i) { - btype = (bat->bat_type + i); - if (thermistor == NTC_EXTERNAL) { - btype->batres_tbl = - temp_to_batres_tbl_ext_thermistor; - } else if (strncmp(btech, "LION", 4) == 0) { - btype->batres_tbl = - temp_to_batres_tbl_9100; - } else { - btype->batres_tbl = - temp_to_batres_tbl_thermistor; - } + if (of_property_read_bool(np_bat_supply, "thermistor-on-batctrl")) { + if (strncmp(btech, "LION", 4) == 0) + tmp_batres_tbl = temp_to_batres_tbl_9100; + else + tmp_batres_tbl = temp_to_batres_tbl_thermistor; + } else { + bat->n_btypes = 4; + bat->bat_type = bat_type_ext_thermistor; + bat->adc_therm = ABx500_ADC_THERM_BATTEMP; + tmp_batres_tbl = temp_to_batres_tbl_ext_thermistor; } + + /* select the battery resolution table */ + for (i = 0; i < bat->n_btypes; ++i) + bat->bat_type[i]->batres_tbl = tmp_batres_tbl; + of_node_put(np_bat_supply); return 0; -- cgit v1.2.2 From b0284de05e07d56ff7de154d0c9263788755f5eb Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 30 Nov 2012 10:09:42 +0000 Subject: ab8500_bm: Rename battery management platform data to something more logical The platform specific battery management configuration data structure is currently called 'bat' short for 'battery'; however, it contains information for all components of the battery management group, rather than information pertaining to the battery itself - there are other structures for that. So, in keeping with its structure namesake 'abx500_bm_data', we rename it to 'bm' here. Using similar logic, we're also renaming 'bmdevs_of_probe' to the more device specific 'ab8500_bm_of_probe'. Signed-off-by: Lee Jones --- drivers/power/ab8500_bmdata.c | 6 +-- drivers/power/ab8500_btemp.c | 60 ++++++++++----------- drivers/power/ab8500_charger.c | 24 ++++----- drivers/power/ab8500_fg.c | 96 +++++++++++++++++----------------- drivers/power/abx500_chargalg.c | 112 ++++++++++++++++++++-------------------- 5 files changed, 149 insertions(+), 149 deletions(-) (limited to 'drivers') diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c index df5a590d760e..c2fb2c554019 100644 --- a/drivers/power/ab8500_bmdata.c +++ b/drivers/power/ab8500_bmdata.c @@ -452,9 +452,9 @@ struct abx500_bm_data ab8500_bm_data = { .fg_params = &fg, }; -int __devinit bmdevs_of_probe(struct device *dev, - struct device_node *np, - struct abx500_bm_data **battery) +int __devinit ab8500_bm_of_probe(struct device *dev, + struct device_node *np, + struct abx500_bm_data **battery) { struct batres_vs_temp *tmp_batres_tbl; struct device_node *np_bat_supply; diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c index 5d1bf0bd6fa5..33ed0fccbd0e 100644 --- a/drivers/power/ab8500_btemp.c +++ b/drivers/power/ab8500_btemp.c @@ -78,7 +78,7 @@ struct ab8500_btemp_ranges { * @parent: Pointer to the struct ab8500 * @gpadc: Pointer to the struct gpadc * @fg: Pointer to the struct fg - * @bat: Pointer to the abx500_bm platform data + * @bm: Platform specific battery management information * @btemp_psy: Structure for BTEMP specific battery properties * @events: Structure for information about events triggered * @btemp_ranges: Battery temperature range structure @@ -95,7 +95,7 @@ struct ab8500_btemp { struct ab8500 *parent; struct ab8500_gpadc *gpadc; struct ab8500_fg *fg; - struct abx500_bm_data *bat; + struct abx500_bm_data *bm; struct power_supply btemp_psy; struct ab8500_btemp_events events; struct ab8500_btemp_ranges btemp_ranges; @@ -149,13 +149,13 @@ static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di, return (450000 * (v_batctrl)) / (1800 - v_batctrl); } - if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL) { + if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL) { /* * If the battery has internal NTC, we use the current * source to calculate the resistance, 7uA or 20uA */ rbs = (v_batctrl * 1000 - - di->bat->gnd_lift_resistance * inst_curr) + - di->bm->gnd_lift_resistance * inst_curr) / di->curr_source; } else { /* @@ -211,7 +211,7 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di, return 0; /* Only do this for batteries with internal NTC */ - if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) { + if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) { if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA) curr = BAT_CTRL_7U_ENA; else @@ -243,7 +243,7 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di, __func__); goto disable_curr_source; } - } else if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) { + } else if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) { dev_dbg(di->dev, "Disable BATCTRL curr source\n"); /* Write 0 to the curr bits */ @@ -459,9 +459,9 @@ static int ab8500_btemp_measure_temp(struct ab8500_btemp *di) int rbat, rntc, vntc; u8 id; - id = di->bat->batt_id; + id = di->bm->batt_id; - if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && + if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && id != BATTERY_UNKNOWN) { rbat = ab8500_btemp_get_batctrl_res(di); @@ -476,8 +476,8 @@ static int ab8500_btemp_measure_temp(struct ab8500_btemp *di) } temp = ab8500_btemp_res_to_temp(di, - di->bat->bat_type[id].r_to_t_tbl, - di->bat->bat_type[id].n_temp_tbl_elements, rbat); + di->bm->bat_type[id].r_to_t_tbl, + di->bm->bat_type[id].n_temp_tbl_elements, rbat); } else { vntc = ab8500_gpadc_convert(di->gpadc, BTEMP_BALL); if (vntc < 0) { @@ -493,8 +493,8 @@ static int ab8500_btemp_measure_temp(struct ab8500_btemp *di) rntc = 230000 * vntc / (VTVOUT_V - vntc); temp = ab8500_btemp_res_to_temp(di, - di->bat->bat_type[id].r_to_t_tbl, - di->bat->bat_type[id].n_temp_tbl_elements, rntc); + di->bm->bat_type[id].r_to_t_tbl, + di->bm->bat_type[id].n_temp_tbl_elements, rntc); prev = temp; } dev_dbg(di->dev, "Battery temperature is %d\n", temp); @@ -515,7 +515,7 @@ static int ab8500_btemp_id(struct ab8500_btemp *di) u8 i; di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA; - di->bat->batt_id = BATTERY_UNKNOWN; + di->bm->batt_id = BATTERY_UNKNOWN; res = ab8500_btemp_get_batctrl_res(di); if (res < 0) { @@ -524,23 +524,23 @@ static int ab8500_btemp_id(struct ab8500_btemp *di) } /* BATTERY_UNKNOWN is defined on position 0, skip it! */ - for (i = BATTERY_UNKNOWN + 1; i < di->bat->n_btypes; i++) { - if ((res <= di->bat->bat_type[i].resis_high) && - (res >= di->bat->bat_type[i].resis_low)) { + for (i = BATTERY_UNKNOWN + 1; i < di->bm->n_btypes; i++) { + if ((res <= di->bm->bat_type[i].resis_high) && + (res >= di->bm->bat_type[i].resis_low)) { dev_dbg(di->dev, "Battery detected on %s" " low %d < res %d < high: %d" " index: %d\n", - di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL ? + di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL ? "BATCTRL" : "BATTEMP", - di->bat->bat_type[i].resis_low, res, - di->bat->bat_type[i].resis_high, i); + di->bm->bat_type[i].resis_low, res, + di->bm->bat_type[i].resis_high, i); - di->bat->batt_id = i; + di->bm->batt_id = i; break; } } - if (di->bat->batt_id == BATTERY_UNKNOWN) { + if (di->bm->batt_id == BATTERY_UNKNOWN) { dev_warn(di->dev, "Battery identified as unknown" ", resistance %d Ohm\n", res); return -ENXIO; @@ -550,13 +550,13 @@ static int ab8500_btemp_id(struct ab8500_btemp *di) * We only have to change current source if the * detected type is Type 1, else we use the 7uA source */ - if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && - di->bat->batt_id == 1) { + if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && + di->bm->batt_id == 1) { dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n"); di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA; } - return di->bat->batt_id; + return di->bm->batt_id; } /** @@ -586,9 +586,9 @@ static void ab8500_btemp_periodic_work(struct work_struct *work) } if (di->events.ac_conn || di->events.usb_conn) - interval = di->bat->temp_interval_chg; + interval = di->bm->temp_interval_chg; else - interval = di->bat->temp_interval_nochg; + interval = di->bm->temp_interval_nochg; /* Schedule a new measurement */ queue_delayed_work(di->btemp_wq, @@ -815,7 +815,7 @@ static int ab8500_btemp_get_property(struct power_supply *psy, val->intval = 1; break; case POWER_SUPPLY_PROP_TECHNOLOGY: - val->intval = di->bat->bat_type[di->bat->batt_id].name; + val->intval = di->bm->bat_type[di->bm->batt_id].name; break; case POWER_SUPPLY_PROP_TEMP: val->intval = ab8500_btemp_get_temp(di); @@ -985,10 +985,10 @@ static int __devinit ab8500_btemp_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s no mem for ab8500_btemp\n", __func__); return -ENOMEM; } - di->bat = pdev->mfd_cell->platform_data; - if (!di->bat) { + di->bm = pdev->mfd_cell->platform_data; + if (!di->bm) { if (np) { - ret = bmdevs_of_probe(&pdev->dev, np, &di->bat); + ret = ab8500_bm_of_probe(&pdev->dev, np, &di->bm); if (ret) { dev_err(&pdev->dev, "failed to get battery information\n"); diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c index d27dd7fec163..21dc8422778d 100644 --- a/drivers/power/ab8500_charger.c +++ b/drivers/power/ab8500_charger.c @@ -189,7 +189,7 @@ struct ab8500_charger_usb_state { * @autopower_cfg platform specific power config support for "pwron after pwrloss" * @parent: Pointer to the struct ab8500 * @gpadc: Pointer to the struct gpadc - * @bat: Pointer to the abx500_bm platform data + * @bm: Platform specific battery management information * @flags: Structure for information about events triggered * @usb_state: Structure for usb stack information * @ac_chg: AC charger power supply @@ -226,7 +226,7 @@ struct ab8500_charger { bool autopower_cfg; struct ab8500 *parent; struct ab8500_gpadc *gpadc; - struct abx500_bm_data *bat; + struct abx500_bm_data *bm; struct ab8500_charger_event_flags flags; struct ab8500_charger_usb_state usb_state; struct ux500_charger ac_chg; @@ -1034,7 +1034,7 @@ static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di, int min_value; /* We should always use to lowest current limit */ - min_value = min(di->bat->chg_params->usb_curr_max, ich_in); + min_value = min(di->bm->chg_params->usb_curr_max, ich_in); switch (min_value) { case 100: @@ -1176,7 +1176,7 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger, volt_index = ab8500_voltage_to_regval(vset); curr_index = ab8500_current_to_regval(iset); input_curr_index = ab8500_current_to_regval( - di->bat->chg_params->ac_curr_max); + di->bm->chg_params->ac_curr_max); if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) { dev_err(di->dev, "Charger voltage or current too high, " @@ -1193,7 +1193,7 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger, } /* MainChInputCurr: current that can be drawn from the charger*/ ret = ab8500_charger_set_main_in_curr(di, - di->bat->chg_params->ac_curr_max); + di->bm->chg_params->ac_curr_max); if (ret) { dev_err(di->dev, "%s Failed to set MainChInputCurr\n", __func__); @@ -1209,7 +1209,7 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger, } /* Check if VBAT overshoot control should be enabled */ - if (!di->bat->enable_overshoot) + if (!di->bm->enable_overshoot) overshoot = MAIN_CH_NO_OVERSHOOT_ENA_N; /* Enable Main Charger */ @@ -1376,7 +1376,7 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger, return ret; } /* Check if VBAT overshoot control should be enabled */ - if (!di->bat->enable_overshoot) + if (!di->bm->enable_overshoot) overshoot = USB_CHG_NO_OVERSHOOT_ENA_N; /* Enable USB Charger */ @@ -2454,8 +2454,8 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di) ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, AB8500_RTC_BACKUP_CHG_REG, - di->bat->bkup_bat_v | - di->bat->bkup_bat_i); + di->bm->bkup_bat_v | + di->bm->bkup_bat_i); if (ret) { dev_err(di->dev, "failed to setup backup battery charging\n"); goto out; @@ -2644,10 +2644,10 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s no mem for ab8500_charger\n", __func__); return -ENOMEM; } - di->bat = pdev->mfd_cell->platform_data; - if (!di->bat) { + di->bm = pdev->mfd_cell->platform_data; + if (!di->bm) { if (np) { - ret = bmdevs_of_probe(&pdev->dev, np, &di->bat); + ret = ab8500_bm_of_probe(&pdev->dev, np, &di->bm); if (ret) { dev_err(&pdev->dev, "failed to get battery information\n"); diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c index 5a9f58d4c0fb..4cf231375de3 100644 --- a/drivers/power/ab8500_fg.c +++ b/drivers/power/ab8500_fg.c @@ -173,7 +173,7 @@ struct inst_curr_result_list { * @avg_cap: Average capacity filter * @parent: Pointer to the struct ab8500 * @gpadc: Pointer to the struct gpadc - * @bat: Pointer to the abx500_bm platform data + * @bm: Platform specific battery management information * @fg_psy: Structure that holds the FG specific battery properties * @fg_wq: Work queue for running the FG algorithm * @fg_periodic_work: Work to run the FG algorithm periodically @@ -212,7 +212,7 @@ struct ab8500_fg { struct ab8500_fg_avg_cap avg_cap; struct ab8500 *parent; struct ab8500_gpadc *gpadc; - struct abx500_bm_data *bat; + struct abx500_bm_data *bm; struct power_supply fg_psy; struct workqueue_struct *fg_wq; struct delayed_work fg_periodic_work; @@ -355,7 +355,7 @@ static int ab8500_fg_is_low_curr(struct ab8500_fg *di, int curr) /* * We want to know if we're in low current mode */ - if (curr > -di->bat->fg_params->high_curr_threshold) + if (curr > -di->bm->fg_params->high_curr_threshold) return true; else return false; @@ -648,7 +648,7 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res) * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm */ val = (val * QLSB_NANO_AMP_HOURS_X10 * 36 * 4) / - (1000 * di->bat->fg_res); + (1000 * di->bm->fg_res); if (di->turn_off_fg) { dev_dbg(di->dev, "%s Disable FG\n", __func__); @@ -751,7 +751,7 @@ static void ab8500_fg_acc_cur_work(struct work_struct *work) * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm */ di->accu_charge = (val * QLSB_NANO_AMP_HOURS_X10) / - (100 * di->bat->fg_res); + (100 * di->bm->fg_res); /* * Convert to unit value in mA @@ -763,7 +763,7 @@ static void ab8500_fg_acc_cur_work(struct work_struct *work) * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm */ di->avg_curr = (val * QLSB_NANO_AMP_HOURS_X10 * 36) / - (1000 * di->bat->fg_res * (di->fg_samples / 4)); + (1000 * di->bm->fg_res * (di->fg_samples / 4)); di->flags.conv_done = true; @@ -815,8 +815,8 @@ static int ab8500_fg_volt_to_capacity(struct ab8500_fg *di, int voltage) struct abx500_v_to_cap *tbl; int cap = 0; - tbl = di->bat->bat_type[di->bat->batt_id].v_to_cap_tbl, - tbl_size = di->bat->bat_type[di->bat->batt_id].n_v_cap_tbl_elements; + tbl = di->bm->bat_type[di->bm->batt_id].v_to_cap_tbl, + tbl_size = di->bm->bat_type[di->bm->batt_id].n_v_cap_tbl_elements; for (i = 0; i < tbl_size; ++i) { if (voltage > tbl[i].voltage) @@ -867,8 +867,8 @@ static int ab8500_fg_battery_resistance(struct ab8500_fg *di) struct batres_vs_temp *tbl; int resist = 0; - tbl = di->bat->bat_type[di->bat->batt_id].batres_tbl; - tbl_size = di->bat->bat_type[di->bat->batt_id].n_batres_tbl_elements; + tbl = di->bm->bat_type[di->bm->batt_id].batres_tbl; + tbl_size = di->bm->bat_type[di->bm->batt_id].n_batres_tbl_elements; for (i = 0; i < tbl_size; ++i) { if (di->bat_temp / 10 > tbl[i].temp) @@ -889,11 +889,11 @@ static int ab8500_fg_battery_resistance(struct ab8500_fg *di) dev_dbg(di->dev, "%s Temp: %d battery internal resistance: %d" " fg resistance %d, total: %d (mOhm)\n", - __func__, di->bat_temp, resist, di->bat->fg_res / 10, - (di->bat->fg_res / 10) + resist); + __func__, di->bat_temp, resist, di->bm->fg_res / 10, + (di->bm->fg_res / 10) + resist); /* fg_res variable is in 0.1mOhm */ - resist += di->bat->fg_res / 10; + resist += di->bm->fg_res / 10; return resist; } @@ -1111,14 +1111,14 @@ static int ab8500_fg_capacity_level(struct ab8500_fg *di) percent = di->bat_cap.permille / 10; - if (percent <= di->bat->cap_levels->critical || + if (percent <= di->bm->cap_levels->critical || di->flags.low_bat) ret = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; - else if (percent <= di->bat->cap_levels->low) + else if (percent <= di->bm->cap_levels->low) ret = POWER_SUPPLY_CAPACITY_LEVEL_LOW; - else if (percent <= di->bat->cap_levels->normal) + else if (percent <= di->bm->cap_levels->normal) ret = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; - else if (percent <= di->bat->cap_levels->high) + else if (percent <= di->bm->cap_levels->high) ret = POWER_SUPPLY_CAPACITY_LEVEL_HIGH; else ret = POWER_SUPPLY_CAPACITY_LEVEL_FULL; @@ -1183,7 +1183,7 @@ static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init) di->bat_cap.prev_percent != (di->bat_cap.permille) / 10 && (di->bat_cap.permille / 10) < - di->bat->fg_params->maint_thres) { + di->bm->fg_params->maint_thres) { dev_dbg(di->dev, "battery reported full " "but capacity dropping: %d\n", @@ -1285,7 +1285,7 @@ static void ab8500_fg_algorithm_charging(struct ab8500_fg *di) switch (di->charge_state) { case AB8500_FG_CHARGE_INIT: di->fg_samples = SEC_TO_SAMPLE( - di->bat->fg_params->accu_charging); + di->bm->fg_params->accu_charging); ab8500_fg_coulomb_counter(di, true); ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_READOUT); @@ -1347,8 +1347,8 @@ static bool check_sysfs_capacity(struct ab8500_fg *di) cap_permille = ab8500_fg_convert_mah_to_permille(di, di->bat_cap.user_mah); - lower = di->bat_cap.permille - di->bat->fg_params->user_cap_limit * 10; - upper = di->bat_cap.permille + di->bat->fg_params->user_cap_limit * 10; + lower = di->bat_cap.permille - di->bm->fg_params->user_cap_limit * 10; + upper = di->bat_cap.permille + di->bm->fg_params->user_cap_limit * 10; if (lower < 0) lower = 0; @@ -1388,7 +1388,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) case AB8500_FG_DISCHARGE_INIT: /* We use the FG IRQ to work on */ di->init_cnt = 0; - di->fg_samples = SEC_TO_SAMPLE(di->bat->fg_params->init_timer); + di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer); ab8500_fg_coulomb_counter(di, true); ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_INITMEASURING); @@ -1401,17 +1401,17 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) * samples to get an initial capacity. * Then go to READOUT */ - sleep_time = di->bat->fg_params->init_timer; + sleep_time = di->bm->fg_params->init_timer; /* Discard the first [x] seconds */ - if (di->init_cnt > di->bat->fg_params->init_discard_time) { + if (di->init_cnt > di->bm->fg_params->init_discard_time) { ab8500_fg_calc_cap_discharge_voltage(di, true); ab8500_fg_check_capacity_limits(di, true); } di->init_cnt += sleep_time; - if (di->init_cnt > di->bat->fg_params->init_total_time) + if (di->init_cnt > di->bm->fg_params->init_total_time) ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_READOUT_INIT); @@ -1426,7 +1426,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) /* Intentional fallthrough */ case AB8500_FG_DISCHARGE_RECOVERY: - sleep_time = di->bat->fg_params->recovery_sleep_timer; + sleep_time = di->bm->fg_params->recovery_sleep_timer; /* * We should check the power consumption @@ -1438,9 +1438,9 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) if (ab8500_fg_is_low_curr(di, di->inst_curr)) { if (di->recovery_cnt > - di->bat->fg_params->recovery_total_time) { + di->bm->fg_params->recovery_total_time) { di->fg_samples = SEC_TO_SAMPLE( - di->bat->fg_params->accu_high_curr); + di->bm->fg_params->accu_high_curr); ab8500_fg_coulomb_counter(di, true); ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_READOUT); @@ -1453,7 +1453,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) di->recovery_cnt += sleep_time; } else { di->fg_samples = SEC_TO_SAMPLE( - di->bat->fg_params->accu_high_curr); + di->bm->fg_params->accu_high_curr); ab8500_fg_coulomb_counter(di, true); ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_READOUT); @@ -1462,7 +1462,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) case AB8500_FG_DISCHARGE_READOUT_INIT: di->fg_samples = SEC_TO_SAMPLE( - di->bat->fg_params->accu_high_curr); + di->bm->fg_params->accu_high_curr); ab8500_fg_coulomb_counter(di, true); ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_READOUT); @@ -1509,9 +1509,9 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) } di->high_curr_cnt += - di->bat->fg_params->accu_high_curr; + di->bm->fg_params->accu_high_curr; if (di->high_curr_cnt > - di->bat->fg_params->high_curr_time) + di->bm->fg_params->high_curr_time) di->recovery_needed = true; ab8500_fg_calc_cap_discharge_fg(di); @@ -1528,7 +1528,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) ab8500_fg_calc_cap_discharge_voltage(di, true); di->fg_samples = SEC_TO_SAMPLE( - di->bat->fg_params->accu_high_curr); + di->bm->fg_params->accu_high_curr); ab8500_fg_coulomb_counter(di, true); ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_READOUT); @@ -1721,7 +1721,7 @@ static void ab8500_fg_low_bat_work(struct work_struct *work) vbat = ab8500_fg_bat_voltage(di); /* Check if LOW_BAT still fulfilled */ - if (vbat < di->bat->fg_params->lowbat_threshold) { + if (vbat < di->bm->fg_params->lowbat_threshold) { di->flags.low_bat = true; dev_warn(di->dev, "Battery voltage still LOW\n"); @@ -1779,8 +1779,8 @@ static int ab8500_fg_battok_init_hw_register(struct ab8500_fg *di) int ret; int new_val; - sel0 = di->bat->fg_params->battok_falling_th_sel0; - sel1 = di->bat->fg_params->battok_raising_th_sel1; + sel0 = di->bm->fg_params->battok_falling_th_sel0; + sel1 = di->bm->fg_params->battok_raising_th_sel1; cbp_sel0 = ab8500_fg_battok_calc(di, sel0); cbp_sel1 = ab8500_fg_battok_calc(di, sel1); @@ -1963,7 +1963,7 @@ static int ab8500_fg_get_property(struct power_supply *psy, di->bat_cap.max_mah); break; case POWER_SUPPLY_PROP_ENERGY_NOW: - if (di->flags.batt_unknown && !di->bat->chg_unknown_bat && + if (di->flags.batt_unknown && !di->bm->chg_unknown_bat && di->flags.batt_id_received) val->intval = ab8500_fg_convert_mah_to_uwh(di, di->bat_cap.max_mah); @@ -1978,21 +1978,21 @@ static int ab8500_fg_get_property(struct power_supply *psy, val->intval = di->bat_cap.max_mah; break; case POWER_SUPPLY_PROP_CHARGE_NOW: - if (di->flags.batt_unknown && !di->bat->chg_unknown_bat && + if (di->flags.batt_unknown && !di->bm->chg_unknown_bat && di->flags.batt_id_received) val->intval = di->bat_cap.max_mah; else val->intval = di->bat_cap.prev_mah; break; case POWER_SUPPLY_PROP_CAPACITY: - if (di->flags.batt_unknown && !di->bat->chg_unknown_bat && + if (di->flags.batt_unknown && !di->bm->chg_unknown_bat && di->flags.batt_id_received) val->intval = 100; else val->intval = di->bat_cap.prev_percent; break; case POWER_SUPPLY_PROP_CAPACITY_LEVEL: - if (di->flags.batt_unknown && !di->bat->chg_unknown_bat && + if (di->flags.batt_unknown && !di->bm->chg_unknown_bat && di->flags.batt_id_received) val->intval = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN; else @@ -2078,7 +2078,7 @@ static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data) if (!di->flags.batt_id_received) { const struct abx500_battery_type *b; - b = &(di->bat->bat_type[di->bat->batt_id]); + b = &(di->bm->bat_type[di->bm->batt_id]); di->flags.batt_id_received = true; @@ -2155,7 +2155,7 @@ static int ab8500_fg_init_hw_registers(struct ab8500_fg *di) AB8500_SYS_CTRL2_BLOCK, AB8500_LOW_BAT_REG, ab8500_volt_to_regval( - di->bat->fg_params->lowbat_threshold) << 1 | + di->bm->fg_params->lowbat_threshold) << 1 | LOW_BAT_ENABLE); if (ret) { dev_err(di->dev, "%s write failed\n", __func__); @@ -2457,10 +2457,10 @@ static int __devinit ab8500_fg_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s no mem for ab8500_fg\n", __func__); return -ENOMEM; } - di->bat = pdev->mfd_cell->platform_data; - if (!di->bat) { + di->bm = pdev->mfd_cell->platform_data; + if (!di->bm) { if (np) { - ret = bmdevs_of_probe(&pdev->dev, np, &di->bat); + ret = ab8500_bm_of_probe(&pdev->dev, np, &di->bm); if (ret) { dev_err(&pdev->dev, "failed to get battery information\n"); @@ -2491,11 +2491,11 @@ static int __devinit ab8500_fg_probe(struct platform_device *pdev) di->fg_psy.external_power_changed = ab8500_fg_external_power_changed; di->bat_cap.max_mah_design = MILLI_TO_MICRO * - di->bat->bat_type[di->bat->batt_id].charge_full_design; + di->bm->bat_type[di->bm->batt_id].charge_full_design; di->bat_cap.max_mah = di->bat_cap.max_mah_design; - di->vbat_nom = di->bat->bat_type[di->bat->batt_id].nominal_voltage; + di->vbat_nom = di->bm->bat_type[di->bm->batt_id].nominal_voltage; di->init_capacity = true; @@ -2549,7 +2549,7 @@ static int __devinit ab8500_fg_probe(struct platform_device *pdev) goto free_inst_curr_wq; } - di->fg_samples = SEC_TO_SAMPLE(di->bat->fg_params->init_timer); + di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer); ab8500_fg_coulomb_counter(di, true); /* Initialize completion used to notify completion of inst current */ diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c index dcdc4393b9e7..ea2e2eb652ef 100644 --- a/drivers/power/abx500_chargalg.c +++ b/drivers/power/abx500_chargalg.c @@ -207,7 +207,7 @@ enum maxim_ret { * @chg_info: information about connected charger types * @batt_data: data of the battery * @susp_status: current charger suspension status - * @bat: pointer to the abx500_bm platform data + * @bm: Platform specific battery management information * @chargalg_psy: structure that holds the battery properties exposed by * the charging algorithm * @events: structure for information about events triggered @@ -232,7 +232,7 @@ struct abx500_chargalg { struct abx500_chargalg_charger_info chg_info; struct abx500_chargalg_battery_data batt_data; struct abx500_chargalg_suspension_status susp_status; - struct abx500_bm_data *bat; + struct abx500_bm_data *bm; struct power_supply chargalg_psy; struct ux500_charger *ac_chg; struct ux500_charger *usb_chg; @@ -367,13 +367,13 @@ static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di) case AC_CHG: timer_expiration = round_jiffies(jiffies + - (di->bat->main_safety_tmr_h * 3600 * HZ)); + (di->bm->main_safety_tmr_h * 3600 * HZ)); break; case USB_CHG: timer_expiration = round_jiffies(jiffies + - (di->bat->usb_safety_tmr_h * 3600 * HZ)); + (di->bm->usb_safety_tmr_h * 3600 * HZ)); break; default: @@ -638,32 +638,32 @@ static void abx500_chargalg_start_charging(struct abx500_chargalg *di, */ static void abx500_chargalg_check_temp(struct abx500_chargalg *di) { - if (di->batt_data.temp > (di->bat->temp_low + di->t_hyst_norm) && - di->batt_data.temp < (di->bat->temp_high - di->t_hyst_norm)) { + if (di->batt_data.temp > (di->bm->temp_low + di->t_hyst_norm) && + di->batt_data.temp < (di->bm->temp_high - di->t_hyst_norm)) { /* Temp OK! */ di->events.btemp_underover = false; di->events.btemp_lowhigh = false; di->t_hyst_norm = 0; di->t_hyst_lowhigh = 0; } else { - if (((di->batt_data.temp >= di->bat->temp_high) && + if (((di->batt_data.temp >= di->bm->temp_high) && (di->batt_data.temp < - (di->bat->temp_over - di->t_hyst_lowhigh))) || + (di->bm->temp_over - di->t_hyst_lowhigh))) || ((di->batt_data.temp > - (di->bat->temp_under + di->t_hyst_lowhigh)) && - (di->batt_data.temp <= di->bat->temp_low))) { + (di->bm->temp_under + di->t_hyst_lowhigh)) && + (di->batt_data.temp <= di->bm->temp_low))) { /* TEMP minor!!!!! */ di->events.btemp_underover = false; di->events.btemp_lowhigh = true; - di->t_hyst_norm = di->bat->temp_hysteresis; + di->t_hyst_norm = di->bm->temp_hysteresis; di->t_hyst_lowhigh = 0; - } else if (di->batt_data.temp <= di->bat->temp_under || - di->batt_data.temp >= di->bat->temp_over) { + } else if (di->batt_data.temp <= di->bm->temp_under || + di->batt_data.temp >= di->bm->temp_over) { /* TEMP major!!!!! */ di->events.btemp_underover = true; di->events.btemp_lowhigh = false; di->t_hyst_norm = 0; - di->t_hyst_lowhigh = di->bat->temp_hysteresis; + di->t_hyst_lowhigh = di->bm->temp_hysteresis; } else { /* Within hysteresis */ dev_dbg(di->dev, "Within hysteresis limit temp: %d " @@ -682,12 +682,12 @@ static void abx500_chargalg_check_temp(struct abx500_chargalg *di) */ static void abx500_chargalg_check_charger_voltage(struct abx500_chargalg *di) { - if (di->chg_info.usb_volt > di->bat->chg_params->usb_volt_max) + if (di->chg_info.usb_volt > di->bm->chg_params->usb_volt_max) di->chg_info.usb_chg_ok = false; else di->chg_info.usb_chg_ok = true; - if (di->chg_info.ac_volt > di->bat->chg_params->ac_volt_max) + if (di->chg_info.ac_volt > di->bm->chg_params->ac_volt_max) di->chg_info.ac_chg_ok = false; else di->chg_info.ac_chg_ok = true; @@ -707,10 +707,10 @@ static void abx500_chargalg_end_of_charge(struct abx500_chargalg *di) if (di->charge_status == POWER_SUPPLY_STATUS_CHARGING && di->charge_state == STATE_NORMAL && !di->maintenance_chg && (di->batt_data.volt >= - di->bat->bat_type[di->bat->batt_id].termination_vol || + di->bm->bat_type[di->bm->batt_id].termination_vol || di->events.usb_cv_active || di->events.ac_cv_active) && di->batt_data.avg_curr < - di->bat->bat_type[di->bat->batt_id].termination_curr && + di->bm->bat_type[di->bm->batt_id].termination_curr && di->batt_data.avg_curr > 0) { if (++di->eoc_cnt >= EOC_COND_CNT) { di->eoc_cnt = 0; @@ -733,12 +733,12 @@ static void abx500_chargalg_end_of_charge(struct abx500_chargalg *di) static void init_maxim_chg_curr(struct abx500_chargalg *di) { di->ccm.original_iset = - di->bat->bat_type[di->bat->batt_id].normal_cur_lvl; + di->bm->bat_type[di->bm->batt_id].normal_cur_lvl; di->ccm.current_iset = - di->bat->bat_type[di->bat->batt_id].normal_cur_lvl; - di->ccm.test_delta_i = di->bat->maxi->charger_curr_step; - di->ccm.max_current = di->bat->maxi->chg_curr; - di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->bm->bat_type[di->bm->batt_id].normal_cur_lvl; + di->ccm.test_delta_i = di->bm->maxi->charger_curr_step; + di->ccm.max_current = di->bm->maxi->chg_curr; + di->ccm.condition_cnt = di->bm->maxi->wait_cycles; di->ccm.level = 0; } @@ -755,7 +755,7 @@ static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di) { int delta_i; - if (!di->bat->maxi->ena_maxi) + if (!di->bm->maxi->ena_maxi) return MAXIM_RET_NOACTION; delta_i = di->ccm.original_iset - di->batt_data.inst_curr; @@ -766,7 +766,7 @@ static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di) if (di->ccm.wait_cnt == 0) { dev_dbg(di->dev, "lowering current\n"); di->ccm.wait_cnt++; - di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->ccm.condition_cnt = di->bm->maxi->wait_cycles; di->ccm.max_current = di->ccm.current_iset - di->ccm.test_delta_i; di->ccm.current_iset = di->ccm.max_current; @@ -791,7 +791,7 @@ static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di) if (di->ccm.current_iset == di->ccm.original_iset) return MAXIM_RET_NOACTION; - di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->ccm.condition_cnt = di->bm->maxi->wait_cycles; di->ccm.current_iset = di->ccm.original_iset; di->ccm.level = 0; @@ -803,7 +803,7 @@ static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di) di->ccm.max_current) { if (di->ccm.condition_cnt-- == 0) { /* Increse the iset with cco.test_delta_i */ - di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->ccm.condition_cnt = di->bm->maxi->wait_cycles; di->ccm.current_iset += di->ccm.test_delta_i; di->ccm.level++; dev_dbg(di->dev, " Maximization needed, increase" @@ -818,7 +818,7 @@ static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di) return MAXIM_RET_NOACTION; } } else { - di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->ccm.condition_cnt = di->bm->maxi->wait_cycles; return MAXIM_RET_NOACTION; } } @@ -838,7 +838,7 @@ static void handle_maxim_chg_curr(struct abx500_chargalg *di) break; case MAXIM_RET_IBAT_TOO_HIGH: result = abx500_chargalg_update_chg_curr(di, - di->bat->bat_type[di->bat->batt_id].normal_cur_lvl); + di->bm->bat_type[di->bm->batt_id].normal_cur_lvl); if (result) dev_err(di->dev, "failed to set chg curr\n"); break; @@ -1210,7 +1210,7 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di) * this way */ if (!charger_status || - (di->events.batt_unknown && !di->bat->chg_unknown_bat)) { + (di->events.batt_unknown && !di->bm->chg_unknown_bat)) { if (di->charge_state != STATE_HANDHELD) { di->events.safety_timer_expired = false; abx500_chargalg_state_to(di, STATE_HANDHELD_INIT); @@ -1394,8 +1394,8 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di) case STATE_NORMAL_INIT: abx500_chargalg_start_charging(di, - di->bat->bat_type[di->bat->batt_id].normal_vol_lvl, - di->bat->bat_type[di->bat->batt_id].normal_cur_lvl); + di->bm->bat_type[di->bm->batt_id].normal_vol_lvl, + di->bm->bat_type[di->bm->batt_id].normal_cur_lvl); abx500_chargalg_state_to(di, STATE_NORMAL); abx500_chargalg_start_safety_timer(di); abx500_chargalg_stop_maintenance_timer(di); @@ -1411,7 +1411,7 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di) handle_maxim_chg_curr(di); if (di->charge_status == POWER_SUPPLY_STATUS_FULL && di->maintenance_chg) { - if (di->bat->no_maintenance) + if (di->bm->no_maintenance) abx500_chargalg_state_to(di, STATE_WAIT_FOR_RECHARGE_INIT); else @@ -1429,7 +1429,7 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di) case STATE_WAIT_FOR_RECHARGE: if (di->batt_data.volt <= - di->bat->bat_type[di->bat->batt_id].recharge_vol) { + di->bm->bat_type[di->bm->batt_id].recharge_vol) { if (di->rch_cnt-- == 0) abx500_chargalg_state_to(di, STATE_NORMAL_INIT); } else @@ -1439,13 +1439,13 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di) case STATE_MAINTENANCE_A_INIT: abx500_chargalg_stop_safety_timer(di); abx500_chargalg_start_maintenance_timer(di, - di->bat->bat_type[ - di->bat->batt_id].maint_a_chg_timer_h); + di->bm->bat_type[ + di->bm->batt_id].maint_a_chg_timer_h); abx500_chargalg_start_charging(di, - di->bat->bat_type[ - di->bat->batt_id].maint_a_vol_lvl, - di->bat->bat_type[ - di->bat->batt_id].maint_a_cur_lvl); + di->bm->bat_type[ + di->bm->batt_id].maint_a_vol_lvl, + di->bm->bat_type[ + di->bm->batt_id].maint_a_cur_lvl); abx500_chargalg_state_to(di, STATE_MAINTENANCE_A); power_supply_changed(&di->chargalg_psy); /* Intentional fallthrough*/ @@ -1459,13 +1459,13 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di) case STATE_MAINTENANCE_B_INIT: abx500_chargalg_start_maintenance_timer(di, - di->bat->bat_type[ - di->bat->batt_id].maint_b_chg_timer_h); + di->bm->bat_type[ + di->bm->batt_id].maint_b_chg_timer_h); abx500_chargalg_start_charging(di, - di->bat->bat_type[ - di->bat->batt_id].maint_b_vol_lvl, - di->bat->bat_type[ - di->bat->batt_id].maint_b_cur_lvl); + di->bm->bat_type[ + di->bm->batt_id].maint_b_vol_lvl, + di->bm->bat_type[ + di->bm->batt_id].maint_b_cur_lvl); abx500_chargalg_state_to(di, STATE_MAINTENANCE_B); power_supply_changed(&di->chargalg_psy); /* Intentional fallthrough*/ @@ -1479,10 +1479,10 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di) case STATE_TEMP_LOWHIGH_INIT: abx500_chargalg_start_charging(di, - di->bat->bat_type[ - di->bat->batt_id].low_high_vol_lvl, - di->bat->bat_type[ - di->bat->batt_id].low_high_cur_lvl); + di->bm->bat_type[ + di->bm->batt_id].low_high_vol_lvl, + di->bm->bat_type[ + di->bm->batt_id].low_high_cur_lvl); abx500_chargalg_stop_maintenance_timer(di); di->charge_status = POWER_SUPPLY_STATUS_CHARGING; abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH); @@ -1543,11 +1543,11 @@ static void abx500_chargalg_periodic_work(struct work_struct *work) if (di->chg_info.conn_chg) queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, - di->bat->interval_charging * HZ); + di->bm->interval_charging * HZ); else queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, - di->bat->interval_not_charging * HZ); + di->bm->interval_not_charging * HZ); } /** @@ -1614,7 +1614,7 @@ static int abx500_chargalg_get_property(struct power_supply *psy, if (di->events.batt_ovv) { val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; } else if (di->events.btemp_underover) { - if (di->batt_data.temp <= di->bat->temp_under) + if (di->batt_data.temp <= di->bm->temp_under) val->intval = POWER_SUPPLY_HEALTH_COLD; else val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; @@ -1814,10 +1814,10 @@ static int __devinit abx500_chargalg_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s no mem for ab8500_chargalg\n", __func__); return -ENOMEM; } - di->bat = pdev->mfd_cell->platform_data; - if (!di->bat) { + di->bm = pdev->mfd_cell->platform_data; + if (!di->bm) { if (np) { - ret = bmdevs_of_probe(&pdev->dev, np, &di->bat); + ret = ab8500_bm_of_probe(&pdev->dev, np, &di->bm); if (ret) { dev_err(&pdev->dev, "failed to get battery information\n"); -- cgit v1.2.2 From 23a04f9f40f2b32ee593b768483105b1c776814d Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 29 Nov 2012 15:08:41 +0000 Subject: ab8500_bm: Always send platform specific battery information via pdata Currently the AB8500 battery management subsystem receives platform specific information via two different means depending on how the platform is booted. If DT is not enabled, a reference to a *_bm_data data structure containing each platform specific attribute is passed though platform_data. However, if DT is enabled, then platform_data is empty and the reference is gained though a DT specific probe function. There are two issues here 1) the same reference is being collected each time and 2) the DT way doesn't allow any provisions to select different platform specific attributes, which kind of defeats the object. Cc: Samuel Ortiz Signed-off-by: Lee Jones --- drivers/mfd/ab8500-core.c | 8 -------- drivers/power/ab8500_bmdata.c | 33 ++++++++++++++------------------- drivers/power/ab8500_btemp.c | 2 +- drivers/power/ab8500_charger.c | 2 +- drivers/power/ab8500_fg.c | 2 +- drivers/power/abx500_chargalg.c | 2 +- 6 files changed, 18 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 5ec70f26b9d5..bbd49d796902 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -1044,40 +1044,32 @@ static struct mfd_cell __devinitdata ab8500_bm_devs[] = { .of_compatible = "stericsson,ab8500-charger", .num_resources = ARRAY_SIZE(ab8500_charger_resources), .resources = ab8500_charger_resources, -#ifndef CONFIG_OF .platform_data = &ab8500_bm_data, .pdata_size = sizeof(ab8500_bm_data), -#endif }, { .name = "ab8500-btemp", .of_compatible = "stericsson,ab8500-btemp", .num_resources = ARRAY_SIZE(ab8500_btemp_resources), .resources = ab8500_btemp_resources, -#ifndef CONFIG_OF .platform_data = &ab8500_bm_data, .pdata_size = sizeof(ab8500_bm_data), -#endif }, { .name = "ab8500-fg", .of_compatible = "stericsson,ab8500-fg", .num_resources = ARRAY_SIZE(ab8500_fg_resources), .resources = ab8500_fg_resources, -#ifndef CONFIG_OF .platform_data = &ab8500_bm_data, .pdata_size = sizeof(ab8500_bm_data), -#endif }, { .name = "ab8500-chargalg", .of_compatible = "stericsson,ab8500-chargalg", .num_resources = ARRAY_SIZE(ab8500_chargalg_resources), .resources = ab8500_chargalg_resources, -#ifndef CONFIG_OF .platform_data = &ab8500_bm_data, .pdata_size = sizeof(ab8500_bm_data), -#endif }, }; diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c index c2fb2c554019..6b772e5f515f 100644 --- a/drivers/power/ab8500_bmdata.c +++ b/drivers/power/ab8500_bmdata.c @@ -454,16 +454,13 @@ struct abx500_bm_data ab8500_bm_data = { int __devinit ab8500_bm_of_probe(struct device *dev, struct device_node *np, - struct abx500_bm_data **battery) + struct abx500_bm_data *bm) { struct batres_vs_temp *tmp_batres_tbl; struct device_node *np_bat_supply; - struct abx500_bm_data *bat; const char *btech; int i; - *battery = &ab8500_bm_data; - /* get phandle to 'battery-info' node */ np_bat_supply = of_parse_phandle(np, "battery", 0); if (!np_bat_supply) { @@ -477,16 +474,14 @@ int __devinit ab8500_bm_of_probe(struct device *dev, return -EINVAL; } - bat = *battery; - if (strncmp(btech, "LION", 4) == 0) { - bat->no_maintenance = true; - bat->chg_unknown_bat = true; - bat->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600; - bat->bat_type[BATTERY_UNKNOWN].termination_vol = 4150; - bat->bat_type[BATTERY_UNKNOWN].recharge_vol = 4130; - bat->bat_type[BATTERY_UNKNOWN].normal_cur_lvl = 520; - bat->bat_type[BATTERY_UNKNOWN].normal_vol_lvl = 4200; + bm->no_maintenance = true; + bm->chg_unknown_bat = true; + bm->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600; + bm->bat_type[BATTERY_UNKNOWN].termination_vol = 4150; + bm->bat_type[BATTERY_UNKNOWN].recharge_vol = 4130; + bm->bat_type[BATTERY_UNKNOWN].normal_cur_lvl = 520; + bm->bat_type[BATTERY_UNKNOWN].normal_vol_lvl = 4200; } if (of_property_read_bool(np_bat_supply, "thermistor-on-batctrl")) { @@ -495,15 +490,15 @@ int __devinit ab8500_bm_of_probe(struct device *dev, else tmp_batres_tbl = temp_to_batres_tbl_thermistor; } else { - bat->n_btypes = 4; - bat->bat_type = bat_type_ext_thermistor; - bat->adc_therm = ABx500_ADC_THERM_BATTEMP; - tmp_batres_tbl = temp_to_batres_tbl_ext_thermistor; + bm->n_btypes = 4; + bm->bat_type = bat_type_ext_thermistor; + bm->adc_therm = ABx500_ADC_THERM_BATTEMP; + tmp_batres_tbl = temp_to_batres_tbl_ext_thermistor; } /* select the battery resolution table */ - for (i = 0; i < bat->n_btypes; ++i) - bat->bat_type[i]->batres_tbl = tmp_batres_tbl; + for (i = 0; i < bm->n_btypes; ++i) + bm->bat_type[i].batres_tbl = tmp_batres_tbl; of_node_put(np_bat_supply); diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c index 33ed0fccbd0e..c0f7dcceae45 100644 --- a/drivers/power/ab8500_btemp.c +++ b/drivers/power/ab8500_btemp.c @@ -988,7 +988,7 @@ static int __devinit ab8500_btemp_probe(struct platform_device *pdev) di->bm = pdev->mfd_cell->platform_data; if (!di->bm) { if (np) { - ret = ab8500_bm_of_probe(&pdev->dev, np, &di->bm); + ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); if (ret) { dev_err(&pdev->dev, "failed to get battery information\n"); diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c index 21dc8422778d..c1077df26783 100644 --- a/drivers/power/ab8500_charger.c +++ b/drivers/power/ab8500_charger.c @@ -2647,7 +2647,7 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev) di->bm = pdev->mfd_cell->platform_data; if (!di->bm) { if (np) { - ret = ab8500_bm_of_probe(&pdev->dev, np, &di->bm); + ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); if (ret) { dev_err(&pdev->dev, "failed to get battery information\n"); diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c index 4cf231375de3..8bb9df92627d 100644 --- a/drivers/power/ab8500_fg.c +++ b/drivers/power/ab8500_fg.c @@ -2460,7 +2460,7 @@ static int __devinit ab8500_fg_probe(struct platform_device *pdev) di->bm = pdev->mfd_cell->platform_data; if (!di->bm) { if (np) { - ret = ab8500_bm_of_probe(&pdev->dev, np, &di->bm); + ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); if (ret) { dev_err(&pdev->dev, "failed to get battery information\n"); diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c index ea2e2eb652ef..22a511c2a719 100644 --- a/drivers/power/abx500_chargalg.c +++ b/drivers/power/abx500_chargalg.c @@ -1817,7 +1817,7 @@ static int __devinit abx500_chargalg_probe(struct platform_device *pdev) di->bm = pdev->mfd_cell->platform_data; if (!di->bm) { if (np) { - ret = ab8500_bm_of_probe(&pdev->dev, np, &di->bm); + ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); if (ret) { dev_err(&pdev->dev, "failed to get battery information\n"); -- cgit v1.2.2 From 95820245edf93c9cd464004db8b52a4b690637a3 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 30 Nov 2012 10:48:30 +0000 Subject: ab8500_btemp: Reorder obtainment of platform specific battery management data Now that we always pass platform specific battery management data through platform_data instead of obtaining it via different means depending the way be boot the system (DT or ATAGs); we need to re-jiggle the way we acquire it in the driver start-up functions. Now it is wrong for it to be missing, but we still allow Device Tree code to fiddle with it once we've confirmed it's there. Signed-off-by: Lee Jones --- drivers/power/ab8500_btemp.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c index c0f7dcceae45..158cba5cff53 100644 --- a/drivers/power/ab8500_btemp.c +++ b/drivers/power/ab8500_btemp.c @@ -976,6 +976,7 @@ static char *supply_interface[] = { static int __devinit ab8500_btemp_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; + struct abx500_bm_data *plat = pdev->dev.platform_data; struct ab8500_btemp *di; int irq, i, ret = 0; u8 val; @@ -985,21 +986,19 @@ static int __devinit ab8500_btemp_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s no mem for ab8500_btemp\n", __func__); return -ENOMEM; } - di->bm = pdev->mfd_cell->platform_data; - if (!di->bm) { - if (np) { - ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); - if (ret) { - dev_err(&pdev->dev, - "failed to get battery information\n"); - return ret; - } - } else { - dev_err(&pdev->dev, "missing dt node for ab8500_btemp\n"); - return -EINVAL; + + if (!plat) { + dev_err(&pdev->dev, "no battery management data supplied\n"); + return -EINVAL; + } + di->bm = plat; + + if (np) { + ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); + if (ret) { + dev_err(&pdev->dev, "failed to get battery information\n"); + return ret; } - } else { - dev_info(&pdev->dev, "falling back to legacy platform data\n"); } /* get parent data */ -- cgit v1.2.2 From 7722b79964f0b1d7909eb7ef69632d73b07ca6a3 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 30 Nov 2012 10:56:28 +0000 Subject: ab8500_charger: Reorder obtainment of platform specific battery management data Now that we always pass platform specific battery management data through platform_data instead of obtaining it via different means depending the way be boot the system (DT or ATAGs); we need to re-jiggle the way we acquire it in the driver start-up functions. Now it is wrong for it to be missing, but we still allow Device Tree code to fiddle with it once we've confirmed it's there. Signed-off-by: Lee Jones --- drivers/power/ab8500_charger.c | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c index c1077df26783..2ddface4b2c4 100644 --- a/drivers/power/ab8500_charger.c +++ b/drivers/power/ab8500_charger.c @@ -2636,6 +2636,7 @@ static char *supply_interface[] = { static int __devinit ab8500_charger_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; + struct abx500_bm_data *plat = pdev->dev.platform_data; struct ab8500_charger *di; int irq, i, charger_status, ret = 0; @@ -2644,24 +2645,22 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s no mem for ab8500_charger\n", __func__); return -ENOMEM; } - di->bm = pdev->mfd_cell->platform_data; - if (!di->bm) { - if (np) { - ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); - if (ret) { - dev_err(&pdev->dev, - "failed to get battery information\n"); - return ret; - } - di->autopower_cfg = of_property_read_bool(np, "autopower_cfg"); - } else { - dev_err(&pdev->dev, "missing dt node for ab8500_charger\n"); - return -EINVAL; + + if (!plat) { + dev_err(&pdev->dev, "no battery management data supplied\n"); + return -EINVAL; + } + di->bm = plat; + + if (np) { + ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); + if (ret) { + dev_err(&pdev->dev, "failed to get battery information\n"); + return ret; } - } else { - dev_info(&pdev->dev, "falling back to legacy platform data\n"); + di->autopower_cfg = of_property_read_bool(np, "autopower_cfg"); + } else di->autopower_cfg = false; - } /* get parent data */ di->dev = &pdev->dev; -- cgit v1.2.2 From 195c1c660c1868ac2024ad0ee3d5dce49bde4488 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 30 Nov 2012 10:56:51 +0000 Subject: ab8500_fg: Reorder obtainment of platform specific battery management data Now that we always pass platform specific battery management data through platform_data instead of obtaining it via different means depending the way be boot the system (DT or ATAGs); we need to re-jiggle the way we acquire it in the driver start-up functions. Now it is wrong for it to be missing, but we still allow Device Tree code to fiddle with it once we've confirmed it's there. Signed-off-by: Lee Jones --- drivers/power/ab8500_fg.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c index 8bb9df92627d..df681a80d8a4 100644 --- a/drivers/power/ab8500_fg.c +++ b/drivers/power/ab8500_fg.c @@ -2448,6 +2448,7 @@ static char *supply_interface[] = { static int __devinit ab8500_fg_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; + struct abx500_bm_data *plat = pdev->dev.platform_data; struct ab8500_fg *di; int i, irq; int ret = 0; @@ -2457,21 +2458,19 @@ static int __devinit ab8500_fg_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s no mem for ab8500_fg\n", __func__); return -ENOMEM; } - di->bm = pdev->mfd_cell->platform_data; - if (!di->bm) { - if (np) { - ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); - if (ret) { - dev_err(&pdev->dev, - "failed to get battery information\n"); - return ret; - } - } else { - dev_err(&pdev->dev, "missing dt node for ab8500_fg\n"); - return -EINVAL; + + if (!plat) { + dev_err(&pdev->dev, "no battery management data supplied\n"); + return -EINVAL; + } + di->bm = plat; + + if (np) { + ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); + if (ret) { + dev_err(&pdev->dev, "failed to get battery information\n"); + return ret; } - } else { - dev_info(&pdev->dev, "falling back to legacy platform data\n"); } mutex_init(&di->cc_lock); -- cgit v1.2.2 From bdc56b44038e1472d24c9195337226b8d6f2961e Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 30 Nov 2012 10:57:14 +0000 Subject: abx500_chargalg: Reorder obtainment of platform specific battery management data Now that we always pass platform specific battery management data through platform_data instead of obtaining it via different means depending the way be boot the system (DT or ATAGs); we need to re-jiggle the way we acquire it in the driver start-up functions. Now it is wrong for it to be missing, but we still allow Device Tree code to fiddle with it once we've confirmed it's there. Signed-off-by: Lee Jones --- drivers/power/abx500_chargalg.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c index 22a511c2a719..a8acfe5b863f 100644 --- a/drivers/power/abx500_chargalg.c +++ b/drivers/power/abx500_chargalg.c @@ -1806,6 +1806,7 @@ static char *supply_interface[] = { static int __devinit abx500_chargalg_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; + struct abx500_bm_data *plat = pdev->dev.platform_data; struct abx500_chargalg *di; int ret = 0; @@ -1814,21 +1815,19 @@ static int __devinit abx500_chargalg_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s no mem for ab8500_chargalg\n", __func__); return -ENOMEM; } - di->bm = pdev->mfd_cell->platform_data; - if (!di->bm) { - if (np) { - ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); - if (ret) { - dev_err(&pdev->dev, - "failed to get battery information\n"); - return ret; - } - } else { - dev_err(&pdev->dev, "missing dt node for ab8500_chargalg\n"); - return -EINVAL; + + if (!plat) { + dev_err(&pdev->dev, "no battery management data supplied\n"); + return -EINVAL; + } + di->bm = plat; + + if (np) { + ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); + if (ret) { + dev_err(&pdev->dev, "failed to get battery information\n"); + return ret; } - } else { - dev_info(&pdev->dev, "falling back to legacy platform data\n"); } /* get device struct */ -- cgit v1.2.2 From 215cf5c93d2deda4df38d0c9b2429ab2e86808a5 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 30 Nov 2012 11:38:52 +0000 Subject: ab8500_bm: Make the battery Device Tree node reference less cryptic Let's rename the Device Tree node which contains information about an attached battery to something more easily readable. Signed-off-by: Lee Jones --- drivers/power/ab8500_bmdata.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c index 6b772e5f515f..0bf52369d6a5 100644 --- a/drivers/power/ab8500_bmdata.c +++ b/drivers/power/ab8500_bmdata.c @@ -457,18 +457,18 @@ int __devinit ab8500_bm_of_probe(struct device *dev, struct abx500_bm_data *bm) { struct batres_vs_temp *tmp_batres_tbl; - struct device_node *np_bat_supply; + struct device_node *battery_node; const char *btech; int i; /* get phandle to 'battery-info' node */ - np_bat_supply = of_parse_phandle(np, "battery", 0); - if (!np_bat_supply) { + battery_node = of_parse_phandle(np, "battery", 0); + if (!battery_node) { dev_err(dev, "battery node or reference missing\n"); return -EINVAL; } - btech = of_get_property(np_bat_supply, "stericsson,battery-type", NULL); + btech = of_get_property(battery_node, "stericsson,battery-type", NULL); if (!btech) { dev_warn(dev, "missing property battery-name/type\n"); return -EINVAL; @@ -484,7 +484,7 @@ int __devinit ab8500_bm_of_probe(struct device *dev, bm->bat_type[BATTERY_UNKNOWN].normal_vol_lvl = 4200; } - if (of_property_read_bool(np_bat_supply, "thermistor-on-batctrl")) { + if (of_property_read_bool(battery_node, "thermistor-on-batctrl")) { if (strncmp(btech, "LION", 4) == 0) tmp_batres_tbl = temp_to_batres_tbl_9100; else @@ -500,7 +500,7 @@ int __devinit ab8500_bm_of_probe(struct device *dev, for (i = 0; i < bm->n_btypes; ++i) bm->bat_type[i].batres_tbl = tmp_batres_tbl; - of_node_put(np_bat_supply); + of_node_put(battery_node); return 0; } -- cgit v1.2.2