From d14b272bc63f35a8f20b4b1df16c080b8d24f8f1 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Wed, 20 Sep 2006 22:54:21 +0100 Subject: [ARM] 3848/1: pxafb: Add option of fixing video modes and spitz QVGA mode support Add the ability to have pxafb use only certain fixed video modes (selected on a per platform basis). This is useful on production hardware such as the Zaurus cxx00 models where the valid modes are known in advance and any other modes could result in hardware damage. Following this, add support for the cxx00 QVGA mode. Mode information is passed to the lcd_power call to allowing the panel drivers to configure the display hardware accordingly (corgi_lcd already contains the functionality for the cxx00 panel). This mirrors the setup already used by w100fb. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- drivers/video/pxafb.c | 106 +++++++++++++++++++++++++++++++++++++------------- drivers/video/pxafb.h | 4 -- 2 files changed, 78 insertions(+), 32 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index bbb07106cd54..3bc5da4a57ca 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -59,7 +59,7 @@ #define LCCR3_INVALID_CONFIG_MASK (LCCR3_HSP|LCCR3_VSP|LCCR3_PCD|LCCR3_BPP) static void (*pxafb_backlight_power)(int); -static void (*pxafb_lcd_power)(int); +static void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *); static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *); static void set_ctrlr_state(struct pxafb_info *fbi, u_int state); @@ -213,6 +213,48 @@ static unsigned int pxafb_display_dma_period(struct fb_var_screeninfo *var) extern unsigned int get_clk_frequency_khz(int info); #endif +/* + * Select the smallest mode that allows the desired resolution to be + * displayed. If desired parameters can be rounded up. + */ +static struct pxafb_mode_info *pxafb_getmode(struct pxafb_mach_info *mach, struct fb_var_screeninfo *var) +{ + struct pxafb_mode_info *mode = NULL; + struct pxafb_mode_info *modelist = mach->modes; + unsigned int best_x = 0xffffffff, best_y = 0xffffffff; + unsigned int i; + + for (i = 0 ; i < mach->num_modes ; i++) { + if (modelist[i].xres >= var->xres && modelist[i].yres >= var->yres && + modelist[i].xres < best_x && modelist[i].yres < best_y && + modelist[i].bpp >= var->bits_per_pixel ) { + best_x = modelist[i].xres; + best_y = modelist[i].yres; + mode = &modelist[i]; + } + } + + return mode; +} + +static void pxafb_setmode(struct fb_var_screeninfo *var, struct pxafb_mode_info *mode) +{ + var->xres = mode->xres; + var->yres = mode->yres; + var->bits_per_pixel = mode->bpp; + var->pixclock = mode->pixclock; + var->hsync_len = mode->hsync_len; + var->left_margin = mode->left_margin; + var->right_margin = mode->right_margin; + var->vsync_len = mode->vsync_len; + var->upper_margin = mode->upper_margin; + var->lower_margin = mode->lower_margin; + var->sync = mode->sync; + var->grayscale = mode->cmap_greyscale; + var->xres_virtual = var->xres; + var->yres_virtual = var->yres; +} + /* * pxafb_check_var(): * Get the video params out of 'var'. If a value doesn't fit, round it up, @@ -225,15 +267,29 @@ extern unsigned int get_clk_frequency_khz(int info); static int pxafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { struct pxafb_info *fbi = (struct pxafb_info *)info; + struct pxafb_mach_info *inf = fbi->dev->platform_data; if (var->xres < MIN_XRES) var->xres = MIN_XRES; if (var->yres < MIN_YRES) var->yres = MIN_YRES; - if (var->xres > fbi->max_xres) - return -EINVAL; - if (var->yres > fbi->max_yres) - return -EINVAL; + + if (inf->fixed_modes) { + struct pxafb_mode_info *mode; + + mode = pxafb_getmode(inf, var); + if (!mode) + return -EINVAL; + pxafb_setmode(var, mode); + } else { + if (var->xres > inf->modes->xres) + return -EINVAL; + if (var->yres > inf->modes->yres) + return -EINVAL; + if (var->bits_per_pixel > inf->modes->bpp) + return -EINVAL; + } + var->xres_virtual = max(var->xres_virtual, var->xres); var->yres_virtual = @@ -693,7 +749,7 @@ static inline void __pxafb_lcd_power(struct pxafb_info *fbi, int on) pr_debug("pxafb: LCD power o%s\n", on ? "n" : "ff"); if (pxafb_lcd_power) - pxafb_lcd_power(on); + pxafb_lcd_power(on, &fbi->fb.var); } static void pxafb_setup_gpio(struct pxafb_info *fbi) @@ -869,9 +925,11 @@ static void set_ctrlr_state(struct pxafb_info *fbi, u_int state) * registers. */ if (old_state == C_ENABLE) { + __pxafb_lcd_power(fbi, 0); pxafb_disable_controller(fbi); pxafb_setup_gpio(fbi); pxafb_enable_controller(fbi); + __pxafb_lcd_power(fbi, 1); } break; @@ -1049,6 +1107,8 @@ static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev) struct pxafb_info *fbi; void *addr; struct pxafb_mach_info *inf = dev->platform_data; + struct pxafb_mode_info *mode = inf->modes; + int i, smemlen; /* Alloc the pxafb_info and pseudo_palette in one step */ fbi = kmalloc(sizeof(struct pxafb_info) + sizeof(u32) * 16, GFP_KERNEL); @@ -1082,31 +1142,21 @@ static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev) addr = addr + sizeof(struct pxafb_info); fbi->fb.pseudo_palette = addr; - fbi->max_xres = inf->xres; - fbi->fb.var.xres = inf->xres; - fbi->fb.var.xres_virtual = inf->xres; - fbi->max_yres = inf->yres; - fbi->fb.var.yres = inf->yres; - fbi->fb.var.yres_virtual = inf->yres; - fbi->max_bpp = inf->bpp; - fbi->fb.var.bits_per_pixel = inf->bpp; - fbi->fb.var.pixclock = inf->pixclock; - fbi->fb.var.hsync_len = inf->hsync_len; - fbi->fb.var.left_margin = inf->left_margin; - fbi->fb.var.right_margin = inf->right_margin; - fbi->fb.var.vsync_len = inf->vsync_len; - fbi->fb.var.upper_margin = inf->upper_margin; - fbi->fb.var.lower_margin = inf->lower_margin; - fbi->fb.var.sync = inf->sync; - fbi->fb.var.grayscale = inf->cmap_greyscale; + pxafb_setmode(&fbi->fb.var, mode); + fbi->cmap_inverse = inf->cmap_inverse; fbi->cmap_static = inf->cmap_static; + fbi->lccr0 = inf->lccr0; fbi->lccr3 = inf->lccr3; fbi->state = C_STARTUP; fbi->task_state = (u_char)-1; - fbi->fb.fix.smem_len = fbi->max_xres * fbi->max_yres * - fbi->max_bpp / 8; + + for (i = 0; i < inf->num_modes; i++) { + smemlen = mode[i].xres * mode[i].yres * mode[i].bpp / 8; + if (smemlen > fbi->fb.fix.smem_len) + fbi->fb.fix.smem_len = smemlen; + } init_waitqueue_head(&fbi->ctrlr_wait); INIT_WORK(&fbi->task, pxafb_task, fbi); @@ -1307,12 +1357,12 @@ int __init pxafb_probe(struct platform_device *dev) (inf->lccr0 & LCCR0_SDS) == LCCR0_Dual) dev_warn(&dev->dev, "Dual panel only valid in passive mode\n"); if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas && - (inf->upper_margin || inf->lower_margin)) + (inf->modes->upper_margin || inf->modes->lower_margin)) dev_warn(&dev->dev, "Upper and lower margins must be 0 in passive mode\n"); #endif - dev_dbg(&dev->dev, "got a %dx%dx%d LCD\n",inf->xres, inf->yres, inf->bpp); - if (inf->xres == 0 || inf->yres == 0 || inf->bpp == 0) { + dev_dbg(&dev->dev, "got a %dx%dx%d LCD\n",inf->modes->xres, inf->modes->yres, inf->modes->bpp); + if (inf->modes->xres == 0 || inf->modes->yres == 0 || inf->modes->bpp == 0) { dev_err(&dev->dev, "Invalid resolution or bit depth\n"); ret = -EINVAL; goto failed; diff --git a/drivers/video/pxafb.h b/drivers/video/pxafb.h index 47f41f70db7a..7499a1c4bf79 100644 --- a/drivers/video/pxafb.h +++ b/drivers/video/pxafb.h @@ -41,10 +41,6 @@ struct pxafb_info { struct fb_info fb; struct device *dev; - u_int max_bpp; - u_int max_xres; - u_int max_yres; - /* * These are the addresses we mapped * the framebuffer memory region to. -- cgit v1.2.2