From 332960bd7eb48ef21923b4876e7fe3487d6bf11c Mon Sep 17 00:00:00 2001 From: Vikram Pandita Date: Sun, 30 Oct 2011 12:55:09 -0700 Subject: USB: ehci: report Data Buffer Error in debug mode Data Buffer Error as per spec section 4.15.1.1.2 results when there is Underrun or Overrun condition. This error is considered non-fatal and never gets reported. Its a very good indication on things going wrong at system level, like running memory at much slower speed. This is a good error to flag allowing system level corrections. An issue was found with OMAP4460 board where DDR had to be run at full speed and this logging helped. Signed-off-by: Vikram Pandita Reviewed-by: Marek Vasut Signed-off-by: Vikram Pandita Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-q.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 4e4066c35a09..f136f7f1c4f4 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -373,6 +373,17 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) retry_xacterr: if ((token & QTD_STS_ACTIVE) == 0) { + /* Report Data Buffer Error: non-fatal but useful */ + if (token & QTD_STS_DBE) + ehci_dbg(ehci, + "detected DataBufferErr for urb %p ep%d%s len %d, qtd %p [qh %p]\n", + urb, + usb_endpoint_num(&urb->ep->desc), + usb_endpoint_dir_in(&urb->ep->desc) ? "in" : "out", + urb->transfer_buffer_length, + qtd, + qh); + /* on STALL, error, and short reads this urb must * complete and all its qtds must be recycled. */ -- cgit v1.2.2