From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/usb/serial/kl5kusb105.h | 69 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+) create mode 100644 drivers/usb/serial/kl5kusb105.h (limited to 'drivers/usb/serial/kl5kusb105.h') diff --git a/drivers/usb/serial/kl5kusb105.h b/drivers/usb/serial/kl5kusb105.h new file mode 100644 index 000000000000..1231d9e78398 --- /dev/null +++ b/drivers/usb/serial/kl5kusb105.h @@ -0,0 +1,69 @@ +/* + * Definitions for the KLSI KL5KUSB105 serial port adapter + */ + +/* vendor/product pairs that are known to contain this chipset */ +#define PALMCONNECT_VID 0x0830 +#define PALMCONNECT_PID 0x0080 + +#define KLSI_VID 0x05e9 +#define KLSI_KL5KUSB105D_PID 0x00c0 + +/* Vendor commands: */ + + +/* port table -- the chip supports up to 4 channels */ + +/* baud rates */ + +enum { + kl5kusb105a_sio_b115200 = 0, + kl5kusb105a_sio_b57600 = 1, + kl5kusb105a_sio_b38400 = 2, + kl5kusb105a_sio_b19200 = 4, + kl5kusb105a_sio_b14400 = 5, + kl5kusb105a_sio_b9600 = 6, + kl5kusb105a_sio_b4800 = 8, /* unchecked */ + kl5kusb105a_sio_b2400 = 9, /* unchecked */ + kl5kusb105a_sio_b1200 = 0xa, /* unchecked */ + kl5kusb105a_sio_b600 = 0xb /* unchecked */ +}; + +/* data bits */ +#define kl5kusb105a_dtb_7 7 +#define kl5kusb105a_dtb_8 8 + + + +/* requests: */ +#define KL5KUSB105A_SIO_SET_DATA 1 +#define KL5KUSB105A_SIO_POLL 2 +#define KL5KUSB105A_SIO_CONFIGURE 3 +/* values used for request KL5KUSB105A_SIO_CONFIGURE */ +#define KL5KUSB105A_SIO_CONFIGURE_READ_ON 3 +#define KL5KUSB105A_SIO_CONFIGURE_READ_OFF 2 + +/* Interpretation of modem status lines */ +/* These need sorting out by individually connecting pins and checking + * results. FIXME! + * When data is being sent we see 0x30 in the lower byte; this must + * contain DSR and CTS ... + */ +#define KL5KUSB105A_DSR ((1<<4) | (1<<5)) +#define KL5KUSB105A_CTS ((1<<5) | (1<<4)) + +#define KL5KUSB105A_WANTS_TO_SEND 0x30 +//#define KL5KUSB105A_DTR /* Data Terminal Ready */ +//#define KL5KUSB105A_CTS /* Clear To Send */ +//#define KL5KUSB105A_CD /* Carrier Detect */ +//#define KL5KUSB105A_DSR /* Data Set Ready */ +//#define KL5KUSB105A_RxD /* Receive pin */ + +//#define KL5KUSB105A_LE +//#define KL5KUSB105A_RTS +//#define KL5KUSB105A_ST +//#define KL5KUSB105A_SR +//#define KL5KUSB105A_RI /* Ring Indicator */ + +/* vim: set ts=8 sts=8: */ + -- cgit v1.2.2