From 41f05dedeabb0e2cb03734de383db3f0ddecf9e0 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Mon, 5 Sep 2011 21:05:58 +0800 Subject: usb: ehci: remove the 1st wmb in qh_append_tds According to ehci spec 4.10.2, Advance Queue If the fetched qTD has its Active bit set to a zero, the host controller aborts the queue advance and follows the queue head's horizontal pointer to the next schedule data structure. the 'qtd' will be linked into qh hardware queue after the line below *dummy = *qtd; is executed and observed by EHCI HC, but EHCI HC won't have chance to fetch the qtd descriptor pointed by 'qtd' in qh_append_tds until the line below dummy->hw_token = token; #set Active bit here is executed by CPU and observed by EHCI HC. There is already one 'wmb' to order writing to 'dummy'/'qtd' descriptors and writing 'token' to 'dummy' descriptor(set Active bit), so the 1st wmb is not needed and can be removed. Signed-off-by: Alan Stern Signed-off-by: Ming Lei Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-q.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index ef5925830bf1..4e4066c35a09 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -1056,7 +1056,7 @@ static struct ehci_qh *qh_append_tds ( */ token = qtd->hw_token; qtd->hw_token = HALT_BIT(ehci); - wmb (); + dummy = qh->dummy; dma = dummy->qtd_dma; -- cgit v1.2.2