From e01e7fe3886715f083313da409c5850472455d06 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 2 Feb 2008 02:42:52 -0800 Subject: USB: ohci: port reset paranoia timeout This limits how long the OHCI port reset loop waits for the hardware to do its job, if the controller either (a) dies, or (b) can't finish the reset. Such limits are always a good idea. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-hub.c | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) (limited to 'drivers/usb/host/ohci-hub.c') diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 48e4b11f4d3e..c638e6b33c43 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -564,14 +564,18 @@ static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port) u32 temp; u16 now = ohci_readl(ohci, &ohci->regs->fmnumber); u16 reset_done = now + PORT_RESET_MSEC; + int limit_1 = DIV_ROUND_UP(PORT_RESET_MSEC, PORT_RESET_HW_MSEC); /* build a "continuous enough" reset signal, with up to * 3msec gap between pulses. scheduler HZ==100 must work; * this might need to be deadline-scheduled. */ do { + int limit_2; + /* spin until any current reset finishes */ - for (;;) { + limit_2 = PORT_RESET_HW_MSEC * 2; + while (--limit_2 >= 0) { temp = ohci_readl (ohci, portstat); /* handle e.g. CardBus eject */ if (temp == ~(u32)0) @@ -581,6 +585,17 @@ static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port) udelay (500); } + /* timeout (a hardware error) has been observed when + * EHCI sets CF while this driver is resetting a port; + * presumably other disconnect paths might do it too. + */ + if (limit_2 < 0) { + ohci_dbg(ohci, + "port[%d] reset timeout, stat %08x\n", + port, temp); + break; + } + if (!(temp & RH_PS_CCS)) break; if (temp & RH_PS_PRSC) @@ -590,8 +605,11 @@ static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port) ohci_writel (ohci, RH_PS_PRS, portstat); msleep(PORT_RESET_HW_MSEC); now = ohci_readl(ohci, &ohci->regs->fmnumber); - } while (tick_before(now, reset_done)); - /* caller synchronizes using PRSC */ + } while (tick_before(now, reset_done) && --limit_1 >= 0); + + /* caller synchronizes using PRSC ... and handles PRS + * still being set when this returns. + */ return 0; } -- cgit v1.2.2