From 284d115ec9b70d7c38752d10ad393a198db07a4b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Apr 2008 17:32:16 +0100 Subject: [ARM] pxa: separate PXA25x and PXA27x UDC register definitions The PXA25x and PXA27x USB device controller register definitions are different. Currently, they live side by side in pxa-regs.h, but only one set is available depending on the setting of PXA25x or PXA27x. This means that if we build to support both PXA25x and PXA27x, the PXA27x definitions are unavailable, even to PXA27x specific code. Remove these definitions from pxa-regs.h, and place them in separate files. Include these files where appropriate. Note: according to the dependencies in drivers/usb/gadget/Kconfig, we do not support the UDC on PXA27x nor PXA3xx CPUs, so remove the platform devices from pxa27x.c and pxa3xx.c. Signed-off-by: Russell King --- drivers/usb/gadget/pxa2xx_udc.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers/usb/gadget') diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 08f699b1fc57..63db96adc0b0 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -46,19 +46,25 @@ #include #include #include +#include #include #include #include -#include #include #include #include -#include #include #include +/* + * This driver is PXA25x only. Grab the right register definitions. + */ +#ifdef CONFIG_ARCH_PXA +#include +#endif + #include -- cgit v1.2.2 From d438ae5796085379327bdba76114929eedf94a89 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 6 Jun 2008 18:40:47 +0100 Subject: [ARM] 5080/1: touch PSSR_OTGPH only on pxa27x in ohci-pxa27x and pxa27x_udc and include pxa2xx-regs.h as build fix since PSSR definitions moved from pxa-regs.h into pxa2xx-regs.h. Note: This change is temporary as pxa27x processor specific code will be finally moved elsewhere (both drivers should support pxa3xx, too). Signed-off-by: Philipp Zabel Acked-by: Eric Miao Signed-off-by: Russell King --- drivers/usb/gadget/pxa27x_udc.c | 5 +++-- drivers/usb/gadget/pxa27x_udc.h | 8 -------- 2 files changed, 3 insertions(+), 10 deletions(-) (limited to 'drivers/usb/gadget') diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 499b7a23f351..40d6b580f152 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -38,7 +38,7 @@ #include #include #include - +#include /* FIXME: for PSSR */ #include #include "pxa27x_udc.h" @@ -2359,7 +2359,8 @@ static int pxa_udc_resume(struct platform_device *_dev) * Software must configure the USB OTG pad, UDC, and UHC * to the state they were in before entering sleep mode. */ - PSSR |= PSSR_OTGPH; + if (cpu_is_pxa27x()) + PSSR |= PSSR_OTGPH; return 0; } diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h index 97453db924ff..1d1b7936ee11 100644 --- a/drivers/usb/gadget/pxa27x_udc.h +++ b/drivers/usb/gadget/pxa27x_udc.h @@ -484,12 +484,4 @@ static inline struct pxa_udc *to_gadget_udc(struct usb_gadget *gadget) #define ep_warn(ep, fmt, arg...) \ dev_warn(ep->dev->dev, "%s:%s:" fmt, EPNAME(ep), __func__, ## arg) -/* - * Cannot include pxa-regs.h, as register names are similar. - * So PSSR is redefined here. This should be removed once UDC registers will - * be gone from pxa-regs.h. - */ -#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status */ -#define PSSR_OTGPH (1 << 6) /* OTG Peripheral Hold */ - #endif /* __LINUX_USB_GADGET_PXA27X_H */ -- cgit v1.2.2 From 7a8576204333d133d58cbcc59dacf49a5546e3e4 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sun, 22 Jun 2008 23:36:39 +0100 Subject: [ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC drivers The pxa2xx_udc.c driver is renamed to pxa25x_udc.c (the platform driver name changes from pxa2xx-udc to pxa25x-udc) and the platform driver name of pxa27x_udc.c is fixed to pxa27x-udc. pxa_device_udc in devices.c is split into pxa25x and pxa27x flavors and the pxa27x_device_udc is enabled in pxa27x.c. Signed-off-by: Philipp Zabel Acked-by: Nicolas Pitre Acked-by: Eric Miao Signed-off-by: Russell King Including from Ian Molton: Fixes for mistakes left over from the PXA2{5,7}X UDC split. Signed-off-by: Ian Molton Signed-off-by: Russell King --- drivers/usb/gadget/Kconfig | 12 +- drivers/usb/gadget/Makefile | 2 +- drivers/usb/gadget/ether.c | 2 +- drivers/usb/gadget/gadget_chips.h | 4 +- drivers/usb/gadget/inode.c | 2 +- drivers/usb/gadget/pxa25x_udc.c | 2388 ++++++++++++++++++++++++++++++++++++ drivers/usb/gadget/pxa25x_udc.h | 266 +++++ drivers/usb/gadget/pxa27x_udc.c | 4 +- drivers/usb/gadget/pxa2xx_udc.c | 2389 ------------------------------------- drivers/usb/gadget/pxa2xx_udc.h | 267 ----- 10 files changed, 2667 insertions(+), 2669 deletions(-) create mode 100644 drivers/usb/gadget/pxa25x_udc.c create mode 100644 drivers/usb/gadget/pxa25x_udc.h delete mode 100644 drivers/usb/gadget/pxa2xx_udc.c delete mode 100644 drivers/usb/gadget/pxa2xx_udc.h (limited to 'drivers/usb/gadget') diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 6e784d2db423..13dcec30457e 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -172,7 +172,7 @@ config USB_NET2280 default USB_GADGET select USB_GADGET_SELECTED -config USB_GADGET_PXA2XX +config USB_GADGET_PXA25X boolean "PXA 25x or IXP 4xx" depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX help @@ -184,19 +184,19 @@ config USB_GADGET_PXA2XX zero (for control transfers). Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "pxa2xx_udc" and force all + dynamically linked module called "pxa25x_udc" and force all gadget drivers to also be dynamically linked. -config USB_PXA2XX +config USB_PXA25X tristate - depends on USB_GADGET_PXA2XX + depends on USB_GADGET_PXA25X default USB_GADGET select USB_GADGET_SELECTED # if there's only one gadget driver, using only two bulk endpoints, # don't waste memory for the other endpoints -config USB_PXA2XX_SMALL - depends on USB_GADGET_PXA2XX +config USB_PXA25X_SMALL + depends on USB_GADGET_PXA25X bool default n if USB_ETH_RNDIS default y if USB_ZERO diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 12357255d740..e258afd25faf 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -8,7 +8,7 @@ endif obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o obj-$(CONFIG_USB_NET2280) += net2280.o obj-$(CONFIG_USB_AMD5536UDC) += amd5536udc.o -obj-$(CONFIG_USB_PXA2XX) += pxa2xx_udc.o +obj-$(CONFIG_USB_PXA25X) += pxa25x_udc.o obj-$(CONFIG_USB_PXA27X) += pxa27x_udc.o obj-$(CONFIG_USB_GOKU) += goku_udc.o obj-$(CONFIG_USB_OMAP) += omap_udc.o diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 8d61ea67a817..4ce3950b997f 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -262,7 +262,7 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address"); /* For CDC-incapable hardware, choose the simple cdc subset. * Anything that talks bulk (without notable bugs) can do this. */ -#ifdef CONFIG_USB_GADGET_PXA2XX +#ifdef CONFIG_USB_GADGET_PXA25X #define DEV_CONFIG_SUBSET #endif diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h index f7f159c1002b..ca5149ea7312 100644 --- a/drivers/usb/gadget/gadget_chips.h +++ b/drivers/usb/gadget/gadget_chips.h @@ -29,8 +29,8 @@ #define gadget_is_dummy(g) 0 #endif -#ifdef CONFIG_USB_GADGET_PXA2XX -#define gadget_is_pxa(g) !strcmp("pxa2xx_udc", (g)->name) +#ifdef CONFIG_USB_GADGET_PXA25X +#define gadget_is_pxa(g) !strcmp("pxa25x_udc", (g)->name) #else #define gadget_is_pxa(g) 0 #endif diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 69b0a2754f2a..f132a9219e11 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -1501,7 +1501,7 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) } break; -#ifndef CONFIG_USB_GADGET_PXA2XX +#ifndef CONFIG_USB_GADGET_PXA25X /* PXA automagically handles this request too */ case USB_REQ_GET_CONFIGURATION: if (ctrl->bRequestType != 0x80) diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c new file mode 100644 index 000000000000..031dceb93023 --- /dev/null +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -0,0 +1,2388 @@ +/* + * Intel PXA25x and IXP4xx on-chip full speed USB device controllers + * + * Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker) + * Copyright (C) 2003 Robert Schwebel, Pengutronix + * Copyright (C) 2003 Benedikt Spranger, Pengutronix + * Copyright (C) 2003 David Brownell + * Copyright (C) 2003 Joshua Wise + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +/* #define VERBOSE_DEBUG */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include + +/* + * This driver is PXA25x only. Grab the right register definitions. + */ +#ifdef CONFIG_ARCH_PXA +#include +#endif + +#include + + +/* + * This driver handles the USB Device Controller (UDC) in Intel's PXA 25x + * series processors. The UDC for the IXP 4xx series is very similar. + * There are fifteen endpoints, in addition to ep0. + * + * Such controller drivers work with a gadget driver. The gadget driver + * returns descriptors, implements configuration and data protocols used + * by the host to interact with this device, and allocates endpoints to + * the different protocol interfaces. The controller driver virtualizes + * usb hardware so that the gadget drivers will be more portable. + * + * This UDC hardware wants to implement a bit too much USB protocol, so + * it constrains the sorts of USB configuration change events that work. + * The errata for these chips are misleading; some "fixed" bugs from + * pxa250 a0/a1 b0/b1/b2 sure act like they're still there. + * + * Note that the UDC hardware supports DMA (except on IXP) but that's + * not used here. IN-DMA (to host) is simple enough, when the data is + * suitably aligned (16 bytes) ... the network stack doesn't do that, + * other software can. OUT-DMA is buggy in most chip versions, as well + * as poorly designed (data toggle not automatic). So this driver won't + * bother using DMA. (Mostly-working IN-DMA support was available in + * kernels before 2.6.23, but was never enabled or well tested.) + */ + +#define DRIVER_VERSION "30-June-2007" +#define DRIVER_DESC "PXA 25x USB Device Controller driver" + + +static const char driver_name [] = "pxa25x_udc"; + +static const char ep0name [] = "ep0"; + + +#ifdef CONFIG_ARCH_IXP4XX + +/* cpu-specific register addresses are compiled in to this code */ +#ifdef CONFIG_ARCH_PXA +#error "Can't configure both IXP and PXA" +#endif + +/* IXP doesn't yet support */ +#define clk_get(dev,name) NULL +#define clk_enable(clk) do { } while (0) +#define clk_disable(clk) do { } while (0) +#define clk_put(clk) do { } while (0) + +#endif + +#include "pxa25x_udc.h" + + +#ifdef CONFIG_USB_PXA25X_SMALL +#define SIZE_STR " (small)" +#else +#define SIZE_STR "" +#endif + +/* --------------------------------------------------------------------------- + * endpoint related parts of the api to the usb controller hardware, + * used by gadget driver; and the inner talker-to-hardware core. + * --------------------------------------------------------------------------- + */ + +static void pxa25x_ep_fifo_flush (struct usb_ep *ep); +static void nuke (struct pxa25x_ep *, int status); + +/* one GPIO should be used to detect VBUS from the host */ +static int is_vbus_present(void) +{ + struct pxa2xx_udc_mach_info *mach = the_controller->mach; + + if (mach->gpio_vbus) { + int value = gpio_get_value(mach->gpio_vbus); + return mach->gpio_vbus_inverted ? !value : value; + } + if (mach->udc_is_connected) + return mach->udc_is_connected(); + return 1; +} + +/* one GPIO should control a D+ pullup, so host sees this device (or not) */ +static void pullup_off(void) +{ + struct pxa2xx_udc_mach_info *mach = the_controller->mach; + + if (mach->gpio_pullup) + gpio_set_value(mach->gpio_pullup, 0); + else if (mach->udc_command) + mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); +} + +static void pullup_on(void) +{ + struct pxa2xx_udc_mach_info *mach = the_controller->mach; + + if (mach->gpio_pullup) + gpio_set_value(mach->gpio_pullup, 1); + else if (mach->udc_command) + mach->udc_command(PXA2XX_UDC_CMD_CONNECT); +} + +static void pio_irq_enable(int bEndpointAddress) +{ + bEndpointAddress &= 0xf; + if (bEndpointAddress < 8) + UICR0 &= ~(1 << bEndpointAddress); + else { + bEndpointAddress -= 8; + UICR1 &= ~(1 << bEndpointAddress); + } +} + +static void pio_irq_disable(int bEndpointAddress) +{ + bEndpointAddress &= 0xf; + if (bEndpointAddress < 8) + UICR0 |= 1 << bEndpointAddress; + else { + bEndpointAddress -= 8; + UICR1 |= 1 << bEndpointAddress; + } +} + +/* The UDCCR reg contains mask and interrupt status bits, + * so using '|=' isn't safe as it may ack an interrupt. + */ +#define UDCCR_MASK_BITS (UDCCR_REM | UDCCR_SRM | UDCCR_UDE) + +static inline void udc_set_mask_UDCCR(int mask) +{ + UDCCR = (UDCCR & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS); +} + +static inline void udc_clear_mask_UDCCR(int mask) +{ + UDCCR = (UDCCR & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS); +} + +static inline void udc_ack_int_UDCCR(int mask) +{ + /* udccr contains the bits we dont want to change */ + __u32 udccr = UDCCR & UDCCR_MASK_BITS; + + UDCCR = udccr | (mask & ~UDCCR_MASK_BITS); +} + +/* + * endpoint enable/disable + * + * we need to verify the descriptors used to enable endpoints. since pxa25x + * endpoint configurations are fixed, and are pretty much always enabled, + * there's not a lot to manage here. + * + * because pxa25x can't selectively initialize bulk (or interrupt) endpoints, + * (resetting endpoint halt and toggle), SET_INTERFACE is unusable except + * for a single interface (with only the default altsetting) and for gadget + * drivers that don't halt endpoints (not reset by set_interface). that also + * means that if you use ISO, you must violate the USB spec rule that all + * iso endpoints must be in non-default altsettings. + */ +static int pxa25x_ep_enable (struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct pxa25x_ep *ep; + struct pxa25x_udc *dev; + + ep = container_of (_ep, struct pxa25x_ep, ep); + if (!_ep || !desc || ep->desc || _ep->name == ep0name + || desc->bDescriptorType != USB_DT_ENDPOINT + || ep->bEndpointAddress != desc->bEndpointAddress + || ep->fifo_size < le16_to_cpu + (desc->wMaxPacketSize)) { + DMSG("%s, bad ep or descriptor\n", __func__); + return -EINVAL; + } + + /* xfer types must match, except that interrupt ~= bulk */ + if (ep->bmAttributes != desc->bmAttributes + && ep->bmAttributes != USB_ENDPOINT_XFER_BULK + && desc->bmAttributes != USB_ENDPOINT_XFER_INT) { + DMSG("%s, %s type mismatch\n", __func__, _ep->name); + return -EINVAL; + } + + /* hardware _could_ do smaller, but driver doesn't */ + if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK + && le16_to_cpu (desc->wMaxPacketSize) + != BULK_FIFO_SIZE) + || !desc->wMaxPacketSize) { + DMSG("%s, bad %s maxpacket\n", __func__, _ep->name); + return -ERANGE; + } + + dev = ep->dev; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { + DMSG("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + + ep->desc = desc; + ep->stopped = 0; + ep->pio_irqs = 0; + ep->ep.maxpacket = le16_to_cpu (desc->wMaxPacketSize); + + /* flush fifo (mostly for OUT buffers) */ + pxa25x_ep_fifo_flush (_ep); + + /* ... reset halt state too, if we could ... */ + + DBG(DBG_VERBOSE, "enabled %s\n", _ep->name); + return 0; +} + +static int pxa25x_ep_disable (struct usb_ep *_ep) +{ + struct pxa25x_ep *ep; + unsigned long flags; + + ep = container_of (_ep, struct pxa25x_ep, ep); + if (!_ep || !ep->desc) { + DMSG("%s, %s not enabled\n", __func__, + _ep ? ep->ep.name : NULL); + return -EINVAL; + } + local_irq_save(flags); + + nuke (ep, -ESHUTDOWN); + + /* flush fifo (mostly for IN buffers) */ + pxa25x_ep_fifo_flush (_ep); + + ep->desc = NULL; + ep->stopped = 1; + + local_irq_restore(flags); + DBG(DBG_VERBOSE, "%s disabled\n", _ep->name); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* for the pxa25x, these can just wrap kmalloc/kfree. gadget drivers + * must still pass correctly initialized endpoints, since other controller + * drivers may care about how it's currently set up (dma issues etc). + */ + +/* + * pxa25x_ep_alloc_request - allocate a request data structure + */ +static struct usb_request * +pxa25x_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct pxa25x_request *req; + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD (&req->queue); + return &req->req; +} + + +/* + * pxa25x_ep_free_request - deallocate a request data structure + */ +static void +pxa25x_ep_free_request (struct usb_ep *_ep, struct usb_request *_req) +{ + struct pxa25x_request *req; + + req = container_of (_req, struct pxa25x_request, req); + WARN_ON (!list_empty (&req->queue)); + kfree(req); +} + +/*-------------------------------------------------------------------------*/ + +/* + * done - retire a request; caller blocked irqs + */ +static void done(struct pxa25x_ep *ep, struct pxa25x_request *req, int status) +{ + unsigned stopped = ep->stopped; + + list_del_init(&req->queue); + + if (likely (req->req.status == -EINPROGRESS)) + req->req.status = status; + else + status = req->req.status; + + if (status && status != -ESHUTDOWN) + DBG(DBG_VERBOSE, "complete %s req %p stat %d len %u/%u\n", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); + + /* don't modify queue heads during completion callback */ + ep->stopped = 1; + req->req.complete(&ep->ep, &req->req); + ep->stopped = stopped; +} + + +static inline void ep0_idle (struct pxa25x_udc *dev) +{ + dev->ep0state = EP0_IDLE; +} + +static int +write_packet(volatile u32 *uddr, struct pxa25x_request *req, unsigned max) +{ + u8 *buf; + unsigned length, count; + + buf = req->req.buf + req->req.actual; + prefetch(buf); + + /* how big will this packet be? */ + length = min(req->req.length - req->req.actual, max); + req->req.actual += length; + + count = length; + while (likely(count--)) + *uddr = *buf++; + + return length; +} + +/* + * write to an IN endpoint fifo, as many packets as possible. + * irqs will use this to write the rest later. + * caller guarantees at least one packet buffer is ready (or a zlp). + */ +static int +write_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req) +{ + unsigned max; + + max = le16_to_cpu(ep->desc->wMaxPacketSize); + do { + unsigned count; + int is_last, is_short; + + count = write_packet(ep->reg_uddr, req, max); + + /* last packet is usually short (or a zlp) */ + if (unlikely (count != max)) + is_last = is_short = 1; + else { + if (likely(req->req.length != req->req.actual) + || req->req.zero) + is_last = 0; + else + is_last = 1; + /* interrupt/iso maxpacket may not fill the fifo */ + is_short = unlikely (max < ep->fifo_size); + } + + DBG(DBG_VERY_NOISY, "wrote %s %d bytes%s%s %d left %p\n", + ep->ep.name, count, + is_last ? "/L" : "", is_short ? "/S" : "", + req->req.length - req->req.actual, req); + + /* let loose that packet. maybe try writing another one, + * double buffering might work. TSP, TPC, and TFS + * bit values are the same for all normal IN endpoints. + */ + *ep->reg_udccs = UDCCS_BI_TPC; + if (is_short) + *ep->reg_udccs = UDCCS_BI_TSP; + + /* requests complete when all IN data is in the FIFO */ + if (is_last) { + done (ep, req, 0); + if (list_empty(&ep->queue)) + pio_irq_disable (ep->bEndpointAddress); + return 1; + } + + // TODO experiment: how robust can fifo mode tweaking be? + // double buffering is off in the default fifo mode, which + // prevents TFS from being set here. + + } while (*ep->reg_udccs & UDCCS_BI_TFS); + return 0; +} + +/* caller asserts req->pending (ep0 irq status nyet cleared); starts + * ep0 data stage. these chips want very simple state transitions. + */ +static inline +void ep0start(struct pxa25x_udc *dev, u32 flags, const char *tag) +{ + UDCCS0 = flags|UDCCS0_SA|UDCCS0_OPR; + USIR0 = USIR0_IR0; + dev->req_pending = 0; + DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n", + __func__, tag, UDCCS0, flags); +} + +static int +write_ep0_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req) +{ + unsigned count; + int is_short; + + count = write_packet(&UDDR0, req, EP0_FIFO_SIZE); + ep->dev->stats.write.bytes += count; + + /* last packet "must be" short (or a zlp) */ + is_short = (count != EP0_FIFO_SIZE); + + DBG(DBG_VERY_NOISY, "ep0in %d bytes %d left %p\n", count, + req->req.length - req->req.actual, req); + + if (unlikely (is_short)) { + if (ep->dev->req_pending) + ep0start(ep->dev, UDCCS0_IPR, "short IN"); + else + UDCCS0 = UDCCS0_IPR; + + count = req->req.length; + done (ep, req, 0); + ep0_idle(ep->dev); +#ifndef CONFIG_ARCH_IXP4XX +#if 1 + /* This seems to get rid of lost status irqs in some cases: + * host responds quickly, or next request involves config + * change automagic, or should have been hidden, or ... + * + * FIXME get rid of all udelays possible... + */ + if (count >= EP0_FIFO_SIZE) { + count = 100; + do { + if ((UDCCS0 & UDCCS0_OPR) != 0) { + /* clear OPR, generate ack */ + UDCCS0 = UDCCS0_OPR; + break; + } + count--; + udelay(1); + } while (count); + } +#endif +#endif + } else if (ep->dev->req_pending) + ep0start(ep->dev, 0, "IN"); + return is_short; +} + + +/* + * read_fifo - unload packet(s) from the fifo we use for usb OUT + * transfers and put them into the request. caller should have made + * sure there's at least one packet ready. + * + * returns true if the request completed because of short packet or the + * request buffer having filled (and maybe overran till end-of-packet). + */ +static int +read_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req) +{ + for (;;) { + u32 udccs; + u8 *buf; + unsigned bufferspace, count, is_short; + + /* make sure there's a packet in the FIFO. + * UDCCS_{BO,IO}_RPC are all the same bit value. + * UDCCS_{BO,IO}_RNE are all the same bit value. + */ + udccs = *ep->reg_udccs; + if (unlikely ((udccs & UDCCS_BO_RPC) == 0)) + break; + buf = req->req.buf + req->req.actual; + prefetchw(buf); + bufferspace = req->req.length - req->req.actual; + + /* read all bytes from this packet */ + if (likely (udccs & UDCCS_BO_RNE)) { + count = 1 + (0x0ff & *ep->reg_ubcr); + req->req.actual += min (count, bufferspace); + } else /* zlp */ + count = 0; + is_short = (count < ep->ep.maxpacket); + DBG(DBG_VERY_NOISY, "read %s %02x, %d bytes%s req %p %d/%d\n", + ep->ep.name, udccs, count, + is_short ? "/S" : "", + req, req->req.actual, req->req.length); + while (likely (count-- != 0)) { + u8 byte = (u8) *ep->reg_uddr; + + if (unlikely (bufferspace == 0)) { + /* this happens when the driver's buffer + * is smaller than what the host sent. + * discard the extra data. + */ + if (req->req.status != -EOVERFLOW) + DMSG("%s overflow %d\n", + ep->ep.name, count); + req->req.status = -EOVERFLOW; + } else { + *buf++ = byte; + bufferspace--; + } + } + *ep->reg_udccs = UDCCS_BO_RPC; + /* RPC/RSP/RNE could now reflect the other packet buffer */ + + /* iso is one request per packet */ + if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + if (udccs & UDCCS_IO_ROF) + req->req.status = -EHOSTUNREACH; + /* more like "is_done" */ + is_short = 1; + } + + /* completion */ + if (is_short || req->req.actual == req->req.length) { + done (ep, req, 0); + if (list_empty(&ep->queue)) + pio_irq_disable (ep->bEndpointAddress); + return 1; + } + + /* finished that packet. the next one may be waiting... */ + } + return 0; +} + +/* + * special ep0 version of the above. no UBCR0 or double buffering; status + * handshaking is magic. most device protocols don't need control-OUT. + * CDC vendor commands (and RNDIS), mass storage CB/CBI, and some other + * protocols do use them. + */ +static int +read_ep0_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req) +{ + u8 *buf, byte; + unsigned bufferspace; + + buf = req->req.buf + req->req.actual; + bufferspace = req->req.length - req->req.actual; + + while (UDCCS0 & UDCCS0_RNE) { + byte = (u8) UDDR0; + + if (unlikely (bufferspace == 0)) { + /* this happens when the driver's buffer + * is smaller than what the host sent. + * discard the extra data. + */ + if (req->req.status != -EOVERFLOW) + DMSG("%s overflow\n", ep->ep.name); + req->req.status = -EOVERFLOW; + } else { + *buf++ = byte; + req->req.actual++; + bufferspace--; + } + } + + UDCCS0 = UDCCS0_OPR | UDCCS0_IPR; + + /* completion */ + if (req->req.actual >= req->req.length) + return 1; + + /* finished that packet. the next one may be waiting... */ + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static int +pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) +{ + struct pxa25x_request *req; + struct pxa25x_ep *ep; + struct pxa25x_udc *dev; + unsigned long flags; + + req = container_of(_req, struct pxa25x_request, req); + if (unlikely (!_req || !_req->complete || !_req->buf + || !list_empty(&req->queue))) { + DMSG("%s, bad params\n", __func__); + return -EINVAL; + } + + ep = container_of(_ep, struct pxa25x_ep, ep); + if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) { + DMSG("%s, bad ep\n", __func__); + return -EINVAL; + } + + dev = ep->dev; + if (unlikely (!dev->driver + || dev->gadget.speed == USB_SPEED_UNKNOWN)) { + DMSG("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + + /* iso is always one packet per request, that's the only way + * we can report per-packet status. that also helps with dma. + */ + if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC + && req->req.length > le16_to_cpu + (ep->desc->wMaxPacketSize))) + return -EMSGSIZE; + + DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n", + _ep->name, _req, _req->length, _req->buf); + + local_irq_save(flags); + + _req->status = -EINPROGRESS; + _req->actual = 0; + + /* kickstart this i/o queue? */ + if (list_empty(&ep->queue) && !ep->stopped) { + if (ep->desc == NULL/* ep0 */) { + unsigned length = _req->length; + + switch (dev->ep0state) { + case EP0_IN_DATA_PHASE: + dev->stats.write.ops++; + if (write_ep0_fifo(ep, req)) + req = NULL; + break; + + case EP0_OUT_DATA_PHASE: + dev->stats.read.ops++; + /* messy ... */ + if (dev->req_config) { + DBG(DBG_VERBOSE, "ep0 config ack%s\n", + dev->has_cfr ? "" : " raced"); + if (dev->has_cfr) + UDCCFR = UDCCFR_AREN|UDCCFR_ACM + |UDCCFR_MB1; + done(ep, req, 0); + dev->ep0state = EP0_END_XFER; + local_irq_restore (flags); + return 0; + } + if (dev->req_pending) + ep0start(dev, UDCCS0_IPR, "OUT"); + if (length == 0 || ((UDCCS0 & UDCCS0_RNE) != 0 + && read_ep0_fifo(ep, req))) { + ep0_idle(dev); + done(ep, req, 0); + req = NULL; + } + break; + + default: + DMSG("ep0 i/o, odd state %d\n", dev->ep0state); + local_irq_restore (flags); + return -EL2HLT; + } + /* can the FIFO can satisfy the request immediately? */ + } else if ((ep->bEndpointAddress & USB_DIR_IN) != 0) { + if ((*ep->reg_udccs & UDCCS_BI_TFS) != 0 + && write_fifo(ep, req)) + req = NULL; + } else if ((*ep->reg_udccs & UDCCS_BO_RFS) != 0 + && read_fifo(ep, req)) { + req = NULL; + } + + if (likely (req && ep->desc)) + pio_irq_enable(ep->bEndpointAddress); + } + + /* pio or dma irq handler advances the queue. */ + if (likely(req != NULL)) + list_add_tail(&req->queue, &ep->queue); + local_irq_restore(flags); + + return 0; +} + + +/* + * nuke - dequeue ALL requests + */ +static void nuke(struct pxa25x_ep *ep, int status) +{ + struct pxa25x_request *req; + + /* called with irqs blocked */ + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct pxa25x_request, + queue); + done(ep, req, status); + } + if (ep->desc) + pio_irq_disable (ep->bEndpointAddress); +} + + +/* dequeue JUST ONE request */ +static int pxa25x_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct pxa25x_ep *ep; + struct pxa25x_request *req; + unsigned long flags; + + ep = container_of(_ep, struct pxa25x_ep, ep); + if (!_ep || ep->ep.name == ep0name) + return -EINVAL; + + local_irq_save(flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry (req, &ep->queue, queue) { + if (&req->req == _req) + break; + } + if (&req->req != _req) { + local_irq_restore(flags); + return -EINVAL; + } + + done(ep, req, -ECONNRESET); + + local_irq_restore(flags); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static int pxa25x_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct pxa25x_ep *ep; + unsigned long flags; + + ep = container_of(_ep, struct pxa25x_ep, ep); + if (unlikely (!_ep + || (!ep->desc && ep->ep.name != ep0name)) + || ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + DMSG("%s, bad ep\n", __func__); + return -EINVAL; + } + if (value == 0) { + /* this path (reset toggle+halt) is needed to implement + * SET_INTERFACE on normal hardware. but it can't be + * done from software on the PXA UDC, and the hardware + * forgets to do it as part of SET_INTERFACE automagic. + */ + DMSG("only host can clear %s halt\n", _ep->name); + return -EROFS; + } + + local_irq_save(flags); + + if ((ep->bEndpointAddress & USB_DIR_IN) != 0 + && ((*ep->reg_udccs & UDCCS_BI_TFS) == 0 + || !list_empty(&ep->queue))) { + local_irq_restore(flags); + return -EAGAIN; + } + + /* FST bit is the same for control, bulk in, bulk out, interrupt in */ + *ep->reg_udccs = UDCCS_BI_FST|UDCCS_BI_FTF; + + /* ep0 needs special care */ + if (!ep->desc) { + start_watchdog(ep->dev); + ep->dev->req_pending = 0; + ep->dev->ep0state = EP0_STALL; + + /* and bulk/intr endpoints like dropping stalls too */ + } else { + unsigned i; + for (i = 0; i < 1000; i += 20) { + if (*ep->reg_udccs & UDCCS_BI_SST) + break; + udelay(20); + } + } + local_irq_restore(flags); + + DBG(DBG_VERBOSE, "%s halt\n", _ep->name); + return 0; +} + +static int pxa25x_ep_fifo_status(struct usb_ep *_ep) +{ + struct pxa25x_ep *ep; + + ep = container_of(_ep, struct pxa25x_ep, ep); + if (!_ep) { + DMSG("%s, bad ep\n", __func__); + return -ENODEV; + } + /* pxa can't report unclaimed bytes from IN fifos */ + if ((ep->bEndpointAddress & USB_DIR_IN) != 0) + return -EOPNOTSUPP; + if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN + || (*ep->reg_udccs & UDCCS_BO_RFS) == 0) + return 0; + else + return (*ep->reg_ubcr & 0xfff) + 1; +} + +static void pxa25x_ep_fifo_flush(struct usb_ep *_ep) +{ + struct pxa25x_ep *ep; + + ep = container_of(_ep, struct pxa25x_ep, ep); + if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) { + DMSG("%s, bad ep\n", __func__); + return; + } + + /* toggle and halt bits stay unchanged */ + + /* for OUT, just read and discard the FIFO contents. */ + if ((ep->bEndpointAddress & USB_DIR_IN) == 0) { + while (((*ep->reg_udccs) & UDCCS_BO_RNE) != 0) + (void) *ep->reg_uddr; + return; + } + + /* most IN status is the same, but ISO can't stall */ + *ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR + | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) + ? 0 : UDCCS_BI_SST; +} + + +static struct usb_ep_ops pxa25x_ep_ops = { + .enable = pxa25x_ep_enable, + .disable = pxa25x_ep_disable, + + .alloc_request = pxa25x_ep_alloc_request, + .free_request = pxa25x_ep_free_request, + + .queue = pxa25x_ep_queue, + .dequeue = pxa25x_ep_dequeue, + + .set_halt = pxa25x_ep_set_halt, + .fifo_status = pxa25x_ep_fifo_status, + .fifo_flush = pxa25x_ep_fifo_flush, +}; + + +/* --------------------------------------------------------------------------- + * device-scoped parts of the api to the usb controller hardware + * --------------------------------------------------------------------------- + */ + +static int pxa25x_udc_get_frame(struct usb_gadget *_gadget) +{ + return ((UFNRH & 0x07) << 8) | (UFNRL & 0xff); +} + +static int pxa25x_udc_wakeup(struct usb_gadget *_gadget) +{ + /* host may not have enabled remote wakeup */ + if ((UDCCS0 & UDCCS0_DRWF) == 0) + return -EHOSTUNREACH; + udc_set_mask_UDCCR(UDCCR_RSM); + return 0; +} + +static void stop_activity(struct pxa25x_udc *, struct usb_gadget_driver *); +static void udc_enable (struct pxa25x_udc *); +static void udc_disable(struct pxa25x_udc *); + +/* We disable the UDC -- and its 48 MHz clock -- whenever it's not + * in active use. + */ +static int pullup(struct pxa25x_udc *udc) +{ + int is_active = udc->vbus && udc->pullup && !udc->suspended; + DMSG("%s\n", is_active ? "active" : "inactive"); + if (is_active) { + if (!udc->active) { + udc->active = 1; + /* Enable clock for USB device */ + clk_enable(udc->clk); + udc_enable(udc); + } + } else { + if (udc->active) { + if (udc->gadget.speed != USB_SPEED_UNKNOWN) { + DMSG("disconnect %s\n", udc->driver + ? udc->driver->driver.name + : "(no driver)"); + stop_activity(udc, udc->driver); + } + udc_disable(udc); + /* Disable clock for USB device */ + clk_disable(udc->clk); + udc->active = 0; + } + + } + return 0; +} + +/* VBUS reporting logically comes from a transceiver */ +static int pxa25x_udc_vbus_session(struct usb_gadget *_gadget, int is_active) +{ + struct pxa25x_udc *udc; + + udc = container_of(_gadget, struct pxa25x_udc, gadget); + udc->vbus = (is_active != 0); + DMSG("vbus %s\n", is_active ? "supplied" : "inactive"); + pullup(udc); + return 0; +} + +/* drivers may have software control over D+ pullup */ +static int pxa25x_udc_pullup(struct usb_gadget *_gadget, int is_active) +{ + struct pxa25x_udc *udc; + + udc = container_of(_gadget, struct pxa25x_udc, gadget); + + /* not all boards support pullup control */ + if (!udc->mach->gpio_pullup && !udc->mach->udc_command) + return -EOPNOTSUPP; + + udc->pullup = (is_active != 0); + pullup(udc); + return 0; +} + +static const struct usb_gadget_ops pxa25x_udc_ops = { + .get_frame = pxa25x_udc_get_frame, + .wakeup = pxa25x_udc_wakeup, + .vbus_session = pxa25x_udc_vbus_session, + .pullup = pxa25x_udc_pullup, + + // .vbus_draw ... boards may consume current from VBUS, up to + // 100-500mA based on config. the 500uA suspend ceiling means + // that exclusively vbus-powered PXA designs violate USB specs. +}; + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_USB_GADGET_DEBUG_FS + +static int +udc_seq_show(struct seq_file *m, void *_d) +{ + struct pxa25x_udc *dev = m->private; + unsigned long flags; + int i; + u32 tmp; + + local_irq_save(flags); + + /* basic device status */ + seq_printf(m, DRIVER_DESC "\n" + "%s version: %s\nGadget driver: %s\nHost %s\n\n", + driver_name, DRIVER_VERSION SIZE_STR "(pio)", + dev->driver ? dev->driver->driver.name : "(none)", + is_vbus_present() ? "full speed" : "disconnected"); + + /* registers for device and ep0 */ + seq_printf(m, + "uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n", + UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL); + + tmp = UDCCR; + seq_printf(m, + "udccr %02X =%s%s%s%s%s%s%s%s\n", tmp, + (tmp & UDCCR_REM) ? " rem" : "", + (tmp & UDCCR_RSTIR) ? " rstir" : "", + (tmp & UDCCR_SRM) ? " srm" : "", + (tmp & UDCCR_SUSIR) ? " susir" : "", + (tmp & UDCCR_RESIR) ? " resir" : "", + (tmp & UDCCR_RSM) ? " rsm" : "", + (tmp & UDCCR_UDA) ? " uda" : "", + (tmp & UDCCR_UDE) ? " ude" : ""); + + tmp = UDCCS0; + seq_printf(m, + "udccs0 %02X =%s%s%s%s%s%s%s%s\n", tmp, + (tmp & UDCCS0_SA) ? " sa" : "", + (tmp & UDCCS0_RNE) ? " rne" : "", + (tmp & UDCCS0_FST) ? " fst" : "", + (tmp & UDCCS0_SST) ? " sst" : "", + (tmp & UDCCS0_DRWF) ? " dwrf" : "", + (tmp & UDCCS0_FTF) ? " ftf" : "", + (tmp & UDCCS0_IPR) ? " ipr" : "", + (tmp & UDCCS0_OPR) ? " opr" : ""); + + if (dev->has_cfr) { + tmp = UDCCFR; + seq_printf(m, + "udccfr %02X =%s%s\n", tmp, + (tmp & UDCCFR_AREN) ? " aren" : "", + (tmp & UDCCFR_ACM) ? " acm" : ""); + } + + if (!is_vbus_present() || !dev->driver) + goto done; + + seq_printf(m, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n", + dev->stats.write.bytes, dev->stats.write.ops, + dev->stats.read.bytes, dev->stats.read.ops, + dev->stats.irqs); + + /* dump endpoint queues */ + for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) { + struct pxa25x_ep *ep = &dev->ep [i]; + struct pxa25x_request *req; + + if (i != 0) { + const struct usb_endpoint_descriptor *desc; + + desc = ep->desc; + if (!desc) + continue; + tmp = *dev->ep [i].reg_udccs; + seq_printf(m, + "%s max %d %s udccs %02x irqs %lu\n", + ep->ep.name, le16_to_cpu(desc->wMaxPacketSize), + "pio", tmp, ep->pio_irqs); + /* TODO translate all five groups of udccs bits! */ + + } else /* ep0 should only have one transfer queued */ + seq_printf(m, "ep0 max 16 pio irqs %lu\n", + ep->pio_irqs); + + if (list_empty(&ep->queue)) { + seq_printf(m, "\t(nothing queued)\n"); + continue; + } + list_for_each_entry(req, &ep->queue, queue) { + seq_printf(m, + "\treq %p len %d/%d buf %p\n", + &req->req, req->req.actual, + req->req.length, req->req.buf); + } + } + +done: + local_irq_restore(flags); + return 0; +} + +static int +udc_debugfs_open(struct inode *inode, struct file *file) +{ + return single_open(file, udc_seq_show, inode->i_private); +} + +static const struct file_operations debug_fops = { + .open = udc_debugfs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +#define create_debug_files(dev) \ + do { \ + dev->debugfs_udc = debugfs_create_file(dev->gadget.name, \ + S_IRUGO, NULL, dev, &debug_fops); \ + } while (0) +#define remove_debug_files(dev) \ + do { \ + if (dev->debugfs_udc) \ + debugfs_remove(dev->debugfs_udc); \ + } while (0) + +#else /* !CONFIG_USB_GADGET_DEBUG_FILES */ + +#define create_debug_files(dev) do {} while (0) +#define remove_debug_files(dev) do {} while (0) + +#endif /* CONFIG_USB_GADGET_DEBUG_FILES */ + +/*-------------------------------------------------------------------------*/ + +/* + * udc_disable - disable USB device controller + */ +static void udc_disable(struct pxa25x_udc *dev) +{ + /* block all irqs */ + udc_set_mask_UDCCR(UDCCR_SRM|UDCCR_REM); + UICR0 = UICR1 = 0xff; + UFNRH = UFNRH_SIM; + + /* if hardware supports it, disconnect from usb */ + pullup_off(); + + udc_clear_mask_UDCCR(UDCCR_UDE); + + ep0_idle (dev); + dev->gadget.speed = USB_SPEED_UNKNOWN; +} + + +/* + * udc_reinit - initialize software state + */ +static void udc_reinit(struct pxa25x_udc *dev) +{ + u32 i; + + /* device/ep0 records init */ + INIT_LIST_HEAD (&dev->gadget.ep_list); + INIT_LIST_HEAD (&dev->gadget.ep0->ep_list); + dev->ep0state = EP0_IDLE; + + /* basic endpoint records init */ + for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) { + struct pxa25x_ep *ep = &dev->ep[i]; + + if (i != 0) + list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list); + + ep->desc = NULL; + ep->stopped = 0; + INIT_LIST_HEAD (&ep->queue); + ep->pio_irqs = 0; + } + + /* the rest was statically initialized, and is read-only */ +} + +/* until it's enabled, this UDC should be completely invisible + * to any USB host. + */ +static void udc_enable (struct pxa25x_udc *dev) +{ + udc_clear_mask_UDCCR(UDCCR_UDE); + + /* try to clear these bits before we enable the udc */ + udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR); + + ep0_idle(dev); + dev->gadget.speed = USB_SPEED_UNKNOWN; + dev->stats.irqs = 0; + + /* + * sequence taken from chapter 12.5.10, PXA250 AppProcDevManual: + * - enable UDC + * - if RESET is already in progress, ack interrupt + * - unmask reset interrupt + */ + udc_set_mask_UDCCR(UDCCR_UDE); + if (!(UDCCR & UDCCR_UDA)) + udc_ack_int_UDCCR(UDCCR_RSTIR); + + if (dev->has_cfr /* UDC_RES2 is defined */) { + /* pxa255 (a0+) can avoid a set_config race that could + * prevent gadget drivers from configuring correctly + */ + UDCCFR = UDCCFR_ACM | UDCCFR_MB1; + } else { + /* "USB test mode" for pxa250 errata 40-42 (stepping a0, a1) + * which could result in missing packets and interrupts. + * supposedly one bit per endpoint, controlling whether it + * double buffers or not; ACM/AREN bits fit into the holes. + * zero bits (like USIR0_IRx) disable double buffering. + */ + UDC_RES1 = 0x00; + UDC_RES2 = 0x00; + } + + /* enable suspend/resume and reset irqs */ + udc_clear_mask_UDCCR(UDCCR_SRM | UDCCR_REM); + + /* enable ep0 irqs */ + UICR0 &= ~UICR0_IM0; + + /* if hardware supports it, pullup D+ and wait for reset */ + pullup_on(); +} + + +/* when a driver is successfully registered, it will receive + * control requests including set_configuration(), which enables + * non-control requests. then usb traffic follows until a + * disconnect is reported. then a host may connect again, or + * the driver might get unbound. + */ +int usb_gadget_register_driver(struct usb_gadget_driver *driver) +{ + struct pxa25x_udc *dev = the_controller; + int retval; + + if (!driver + || driver->speed < USB_SPEED_FULL + || !driver->bind + || !driver->disconnect + || !driver->setup) + return -EINVAL; + if (!dev) + return -ENODEV; + if (dev->driver) + return -EBUSY; + + /* first hook up the driver ... */ + dev->driver = driver; + dev->gadget.dev.driver = &driver->driver; + dev->pullup = 1; + + retval = device_add (&dev->gadget.dev); + if (retval) { +fail: + dev->driver = NULL; + dev->gadget.dev.driver = NULL; + return retval; + } + retval = driver->bind(&dev->gadget); + if (retval) { + DMSG("bind to driver %s --> error %d\n", + driver->driver.name, retval); + device_del (&dev->gadget.dev); + goto fail; + } + + /* ... then enable host detection and ep0; and we're ready + * for set_configuration as well as eventual disconnect. + */ + DMSG("registered gadget driver '%s'\n", driver->driver.name); + pullup(dev); + dump_state(dev); + return 0; +} +EXPORT_SYMBOL(usb_gadget_register_driver); + +static void +stop_activity(struct pxa25x_udc *dev, struct usb_gadget_driver *driver) +{ + int i; + + /* don't disconnect drivers more than once */ + if (dev->gadget.speed == USB_SPEED_UNKNOWN) + driver = NULL; + dev->gadget.speed = USB_SPEED_UNKNOWN; + + /* prevent new request submissions, kill any outstanding requests */ + for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) { + struct pxa25x_ep *ep = &dev->ep[i]; + + ep->stopped = 1; + nuke(ep, -ESHUTDOWN); + } + del_timer_sync(&dev->timer); + + /* report disconnect; the driver is already quiesced */ + if (driver) + driver->disconnect(&dev->gadget); + + /* re-init driver-visible data structures */ + udc_reinit(dev); +} + +int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) +{ + struct pxa25x_udc *dev = the_controller; + + if (!dev) + return -ENODEV; + if (!driver || driver != dev->driver || !driver->unbind) + return -EINVAL; + + local_irq_disable(); + dev->pullup = 0; + pullup(dev); + stop_activity(dev, driver); + local_irq_enable(); + + driver->unbind(&dev->gadget); + dev->gadget.dev.driver = NULL; + dev->driver = NULL; + + device_del (&dev->gadget.dev); + + DMSG("unregistered gadget driver '%s'\n", driver->driver.name); + dump_state(dev); + return 0; +} +EXPORT_SYMBOL(usb_gadget_unregister_driver); + + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_ARCH_LUBBOCK + +/* Lubbock has separate connect and disconnect irqs. More typical designs + * use one GPIO as the VBUS IRQ, and another to control the D+ pullup. + */ + +static irqreturn_t +lubbock_vbus_irq(int irq, void *_dev) +{ + struct pxa25x_udc *dev = _dev; + int vbus; + + dev->stats.irqs++; + switch (irq) { + case LUBBOCK_USB_IRQ: + vbus = 1; + disable_irq(LUBBOCK_USB_IRQ); + enable_irq(LUBBOCK_USB_DISC_IRQ); + break; + case LUBBOCK_USB_DISC_IRQ: + vbus = 0; + disable_irq(LUBBOCK_USB_DISC_IRQ); + enable_irq(LUBBOCK_USB_IRQ); + break; + default: + return IRQ_NONE; + } + + pxa25x_udc_vbus_session(&dev->gadget, vbus); + return IRQ_HANDLED; +} + +#endif + +static irqreturn_t udc_vbus_irq(int irq, void *_dev) +{ + struct pxa25x_udc *dev = _dev; + int vbus = gpio_get_value(dev->mach->gpio_vbus); + + if (dev->mach->gpio_vbus_inverted) + vbus = !vbus; + + pxa25x_udc_vbus_session(&dev->gadget, vbus); + return IRQ_HANDLED; +} + + +/*-------------------------------------------------------------------------*/ + +static inline void clear_ep_state (struct pxa25x_udc *dev) +{ + unsigned i; + + /* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint + * fifos, and pending transactions mustn't be continued in any case. + */ + for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) + nuke(&dev->ep[i], -ECONNABORTED); +} + +static void udc_watchdog(unsigned long _dev) +{ + struct pxa25x_udc *dev = (void *)_dev; + + local_irq_disable(); + if (dev->ep0state == EP0_STALL + && (UDCCS0 & UDCCS0_FST) == 0 + && (UDCCS0 & UDCCS0_SST) == 0) { + UDCCS0 = UDCCS0_FST|UDCCS0_FTF; + DBG(DBG_VERBOSE, "ep0 re-stall\n"); + start_watchdog(dev); + } + local_irq_enable(); +} + +static void handle_ep0 (struct pxa25x_udc *dev) +{ + u32 udccs0 = UDCCS0; + struct pxa25x_ep *ep = &dev->ep [0]; + struct pxa25x_request *req; + union { + struct usb_ctrlrequest r; + u8 raw [8]; + u32 word [2]; + } u; + + if (list_empty(&ep->queue)) + req = NULL; + else + req = list_entry(ep->queue.next, struct pxa25x_request, queue); + + /* clear stall status */ + if (udccs0 & UDCCS0_SST) { + nuke(ep, -EPIPE); + UDCCS0 = UDCCS0_SST; + del_timer(&dev->timer); + ep0_idle(dev); + } + + /* previous request unfinished? non-error iff back-to-back ... */ + if ((udccs0 & UDCCS0_SA) != 0 && dev->ep0state != EP0_IDLE) { + nuke(ep, 0); + del_timer(&dev->timer); + ep0_idle(dev); + } + + switch (dev->ep0state) { + case EP0_IDLE: + /* late-breaking status? */ + udccs0 = UDCCS0; + + /* start control request? */ + if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE)) + == (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))) { + int i; + + nuke (ep, -EPROTO); + + /* read SETUP packet */ + for (i = 0; i < 8; i++) { + if (unlikely(!(UDCCS0 & UDCCS0_RNE))) { +bad_setup: + DMSG("SETUP %d!\n", i); + goto stall; + } + u.raw [i] = (u8) UDDR0; + } + if (unlikely((UDCCS0 & UDCCS0_RNE) != 0)) + goto bad_setup; + +got_setup: + DBG(DBG_VERBOSE, "SETUP %02x.%02x v%04x i%04x l%04x\n", + u.r.bRequestType, u.r.bRequest, + le16_to_cpu(u.r.wValue), + le16_to_cpu(u.r.wIndex), + le16_to_cpu(u.r.wLength)); + + /* cope with automagic for some standard requests. */ + dev->req_std = (u.r.bRequestType & USB_TYPE_MASK) + == USB_TYPE_STANDARD; + dev->req_config = 0; + dev->req_pending = 1; + switch (u.r.bRequest) { + /* hardware restricts gadget drivers here! */ + case USB_REQ_SET_CONFIGURATION: + if (u.r.bRequestType == USB_RECIP_DEVICE) { + /* reflect hardware's automagic + * up to the gadget driver. + */ +config_change: + dev->req_config = 1; + clear_ep_state(dev); + /* if !has_cfr, there's no synch + * else use AREN (later) not SA|OPR + * USIR0_IR0 acts edge sensitive + */ + } + break; + /* ... and here, even more ... */ + case USB_REQ_SET_INTERFACE: + if (u.r.bRequestType == USB_RECIP_INTERFACE) { + /* udc hardware is broken by design: + * - altsetting may only be zero; + * - hw resets all interfaces' eps; + * - ep reset doesn't include halt(?). + */ + DMSG("broken set_interface (%d/%d)\n", + le16_to_cpu(u.r.wIndex), + le16_to_cpu(u.r.wValue)); + goto config_change; + } + break; + /* hardware was supposed to hide this */ + case USB_REQ_SET_ADDRESS: + if (u.r.bRequestType == USB_RECIP_DEVICE) { + ep0start(dev, 0, "address"); + return; + } + break; + } + + if (u.r.bRequestType & USB_DIR_IN) + dev->ep0state = EP0_IN_DATA_PHASE; + else + dev->ep0state = EP0_OUT_DATA_PHASE; + + i = dev->driver->setup(&dev->gadget, &u.r); + if (i < 0) { + /* hardware automagic preventing STALL... */ + if (dev->req_config) { + /* hardware sometimes neglects to tell + * tell us about config change events, + * so later ones may fail... + */ + WARN("config change %02x fail %d?\n", + u.r.bRequest, i); + return; + /* TODO experiment: if has_cfr, + * hardware didn't ACK; maybe we + * could actually STALL! + */ + } + DBG(DBG_VERBOSE, "protocol STALL, " + "%02x err %d\n", UDCCS0, i); +stall: + /* the watchdog timer helps deal with cases + * where udc seems to clear FST wrongly, and + * then NAKs instead of STALLing. + */ + ep0start(dev, UDCCS0_FST|UDCCS0_FTF, "stall"); + start_watchdog(dev); + dev->ep0state = EP0_STALL; + + /* deferred i/o == no response yet */ + } else if (dev->req_pending) { + if (likely(dev->ep0state == EP0_IN_DATA_PHASE + || dev->req_std || u.r.wLength)) + ep0start(dev, 0, "defer"); + else + ep0start(dev, UDCCS0_IPR, "defer/IPR"); + } + + /* expect at least one data or status stage irq */ + return; + + } else if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA)) + == (UDCCS0_OPR|UDCCS0_SA))) { + unsigned i; + + /* pxa210/250 erratum 131 for B0/B1 says RNE lies. + * still observed on a pxa255 a0. + */ + DBG(DBG_VERBOSE, "e131\n"); + nuke(ep, -EPROTO); + + /* read SETUP data, but don't trust it too much */ + for (i = 0; i < 8; i++) + u.raw [i] = (u8) UDDR0; + if ((u.r.bRequestType & USB_RECIP_MASK) + > USB_RECIP_OTHER) + goto stall; + if (u.word [0] == 0 && u.word [1] == 0) + goto stall; + goto got_setup; + } else { + /* some random early IRQ: + * - we acked FST + * - IPR cleared + * - OPR got set, without SA (likely status stage) + */ + UDCCS0 = udccs0 & (UDCCS0_SA|UDCCS0_OPR); + } + break; + case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */ + if (udccs0 & UDCCS0_OPR) { + UDCCS0 = UDCCS0_OPR|UDCCS0_FTF; + DBG(DBG_VERBOSE, "ep0in premature status\n"); + if (req) + done(ep, req, 0); + ep0_idle(dev); + } else /* irq was IPR clearing */ { + if (req) { + /* this IN packet might finish the request */ + (void) write_ep0_fifo(ep, req); + } /* else IN token before response was written */ + } + break; + case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */ + if (udccs0 & UDCCS0_OPR) { + if (req) { + /* this OUT packet might finish the request */ + if (read_ep0_fifo(ep, req)) + done(ep, req, 0); + /* else more OUT packets expected */ + } /* else OUT token before read was issued */ + } else /* irq was IPR clearing */ { + DBG(DBG_VERBOSE, "ep0out premature status\n"); + if (req) + done(ep, req, 0); + ep0_idle(dev); + } + break; + case EP0_END_XFER: + if (req) + done(ep, req, 0); + /* ack control-IN status (maybe in-zlp was skipped) + * also appears after some config change events. + */ + if (udccs0 & UDCCS0_OPR) + UDCCS0 = UDCCS0_OPR; + ep0_idle(dev); + break; + case EP0_STALL: + UDCCS0 = UDCCS0_FST; + break; + } + USIR0 = USIR0_IR0; +} + +static void handle_ep(struct pxa25x_ep *ep) +{ + struct pxa25x_request *req; + int is_in = ep->bEndpointAddress & USB_DIR_IN; + int completed; + u32 udccs, tmp; + + do { + completed = 0; + if (likely (!list_empty(&ep->queue))) + req = list_entry(ep->queue.next, + struct pxa25x_request, queue); + else + req = NULL; + + // TODO check FST handling + + udccs = *ep->reg_udccs; + if (unlikely(is_in)) { /* irq from TPC, SST, or (ISO) TUR */ + tmp = UDCCS_BI_TUR; + if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK)) + tmp |= UDCCS_BI_SST; + tmp &= udccs; + if (likely (tmp)) + *ep->reg_udccs = tmp; + if (req && likely ((udccs & UDCCS_BI_TFS) != 0)) + completed = write_fifo(ep, req); + + } else { /* irq from RPC (or for ISO, ROF) */ + if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK)) + tmp = UDCCS_BO_SST | UDCCS_BO_DME; + else + tmp = UDCCS_IO_ROF | UDCCS_IO_DME; + tmp &= udccs; + if (likely(tmp)) + *ep->reg_udccs = tmp; + + /* fifos can hold packets, ready for reading... */ + if (likely(req)) { + completed = read_fifo(ep, req); + } else + pio_irq_disable (ep->bEndpointAddress); + } + ep->pio_irqs++; + } while (completed); +} + +/* + * pxa25x_udc_irq - interrupt handler + * + * avoid delays in ep0 processing. the control handshaking isn't always + * under software control (pxa250c0 and the pxa255 are better), and delays + * could cause usb protocol errors. + */ +static irqreturn_t +pxa25x_udc_irq(int irq, void *_dev) +{ + struct pxa25x_udc *dev = _dev; + int handled; + + dev->stats.irqs++; + do { + u32 udccr = UDCCR; + + handled = 0; + + /* SUSpend Interrupt Request */ + if (unlikely(udccr & UDCCR_SUSIR)) { + udc_ack_int_UDCCR(UDCCR_SUSIR); + handled = 1; + DBG(DBG_VERBOSE, "USB suspend%s\n", is_vbus_present() + ? "" : "+disconnect"); + + if (!is_vbus_present()) + stop_activity(dev, dev->driver); + else if (dev->gadget.speed != USB_SPEED_UNKNOWN + && dev->driver + && dev->driver->suspend) + dev->driver->suspend(&dev->gadget); + ep0_idle (dev); + } + + /* RESume Interrupt Request */ + if (unlikely(udccr & UDCCR_RESIR)) { + udc_ack_int_UDCCR(UDCCR_RESIR); + handled = 1; + DBG(DBG_VERBOSE, "USB resume\n"); + + if (dev->gadget.speed != USB_SPEED_UNKNOWN + && dev->driver + && dev->driver->resume + && is_vbus_present()) + dev->driver->resume(&dev->gadget); + } + + /* ReSeT Interrupt Request - USB reset */ + if (unlikely(udccr & UDCCR_RSTIR)) { + udc_ack_int_UDCCR(UDCCR_RSTIR); + handled = 1; + + if ((UDCCR & UDCCR_UDA) == 0) { + DBG(DBG_VERBOSE, "USB reset start\n"); + + /* reset driver and endpoints, + * in case that's not yet done + */ + stop_activity (dev, dev->driver); + + } else { + DBG(DBG_VERBOSE, "USB reset end\n"); + dev->gadget.speed = USB_SPEED_FULL; + memset(&dev->stats, 0, sizeof dev->stats); + /* driver and endpoints are still reset */ + } + + } else { + u32 usir0 = USIR0 & ~UICR0; + u32 usir1 = USIR1 & ~UICR1; + int i; + + if (unlikely (!usir0 && !usir1)) + continue; + + DBG(DBG_VERY_NOISY, "irq %02x.%02x\n", usir1, usir0); + + /* control traffic */ + if (usir0 & USIR0_IR0) { + dev->ep[0].pio_irqs++; + handle_ep0(dev); + handled = 1; + } + + /* endpoint data transfers */ + for (i = 0; i < 8; i++) { + u32 tmp = 1 << i; + + if (i && (usir0 & tmp)) { + handle_ep(&dev->ep[i]); + USIR0 |= tmp; + handled = 1; + } + if (usir1 & tmp) { + handle_ep(&dev->ep[i+8]); + USIR1 |= tmp; + handled = 1; + } + } + } + + /* we could also ask for 1 msec SOF (SIR) interrupts */ + + } while (handled); + return IRQ_HANDLED; +} + +/*-------------------------------------------------------------------------*/ + +static void nop_release (struct device *dev) +{ + DMSG("%s %s\n", __func__, dev->bus_id); +} + +/* this uses load-time allocation and initialization (instead of + * doing it at run-time) to save code, eliminate fault paths, and + * be more obviously correct. + */ +static struct pxa25x_udc memory = { + .gadget = { + .ops = &pxa25x_udc_ops, + .ep0 = &memory.ep[0].ep, + .name = driver_name, + .dev = { + .bus_id = "gadget", + .release = nop_release, + }, + }, + + /* control endpoint */ + .ep[0] = { + .ep = { + .name = ep0name, + .ops = &pxa25x_ep_ops, + .maxpacket = EP0_FIFO_SIZE, + }, + .dev = &memory, + .reg_udccs = &UDCCS0, + .reg_uddr = &UDDR0, + }, + + /* first group of endpoints */ + .ep[1] = { + .ep = { + .name = "ep1in-bulk", + .ops = &pxa25x_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 1, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .reg_udccs = &UDCCS1, + .reg_uddr = &UDDR1, + }, + .ep[2] = { + .ep = { + .name = "ep2out-bulk", + .ops = &pxa25x_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = 2, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .reg_udccs = &UDCCS2, + .reg_ubcr = &UBCR2, + .reg_uddr = &UDDR2, + }, +#ifndef CONFIG_USB_PXA25X_SMALL + .ep[3] = { + .ep = { + .name = "ep3in-iso", + .ops = &pxa25x_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 3, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .reg_udccs = &UDCCS3, + .reg_uddr = &UDDR3, + }, + .ep[4] = { + .ep = { + .name = "ep4out-iso", + .ops = &pxa25x_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = 4, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .reg_udccs = &UDCCS4, + .reg_ubcr = &UBCR4, + .reg_uddr = &UDDR4, + }, + .ep[5] = { + .ep = { + .name = "ep5in-int", + .ops = &pxa25x_ep_ops, + .maxpacket = INT_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = INT_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 5, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .reg_udccs = &UDCCS5, + .reg_uddr = &UDDR5, + }, + + /* second group of endpoints */ + .ep[6] = { + .ep = { + .name = "ep6in-bulk", + .ops = &pxa25x_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 6, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .reg_udccs = &UDCCS6, + .reg_uddr = &UDDR6, + }, + .ep[7] = { + .ep = { + .name = "ep7out-bulk", + .ops = &pxa25x_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = 7, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .reg_udccs = &UDCCS7, + .reg_ubcr = &UBCR7, + .reg_uddr = &UDDR7, + }, + .ep[8] = { + .ep = { + .name = "ep8in-iso", + .ops = &pxa25x_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 8, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .reg_udccs = &UDCCS8, + .reg_uddr = &UDDR8, + }, + .ep[9] = { + .ep = { + .name = "ep9out-iso", + .ops = &pxa25x_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = 9, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .reg_udccs = &UDCCS9, + .reg_ubcr = &UBCR9, + .reg_uddr = &UDDR9, + }, + .ep[10] = { + .ep = { + .name = "ep10in-int", + .ops = &pxa25x_ep_ops, + .maxpacket = INT_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = INT_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 10, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .reg_udccs = &UDCCS10, + .reg_uddr = &UDDR10, + }, + + /* third group of endpoints */ + .ep[11] = { + .ep = { + .name = "ep11in-bulk", + .ops = &pxa25x_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 11, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .reg_udccs = &UDCCS11, + .reg_uddr = &UDDR11, + }, + .ep[12] = { + .ep = { + .name = "ep12out-bulk", + .ops = &pxa25x_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = 12, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .reg_udccs = &UDCCS12, + .reg_ubcr = &UBCR12, + .reg_uddr = &UDDR12, + }, + .ep[13] = { + .ep = { + .name = "ep13in-iso", + .ops = &pxa25x_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 13, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .reg_udccs = &UDCCS13, + .reg_uddr = &UDDR13, + }, + .ep[14] = { + .ep = { + .name = "ep14out-iso", + .ops = &pxa25x_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = 14, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .reg_udccs = &UDCCS14, + .reg_ubcr = &UBCR14, + .reg_uddr = &UDDR14, + }, + .ep[15] = { + .ep = { + .name = "ep15in-int", + .ops = &pxa25x_ep_ops, + .maxpacket = INT_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = INT_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 15, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .reg_udccs = &UDCCS15, + .reg_uddr = &UDDR15, + }, +#endif /* !CONFIG_USB_PXA25X_SMALL */ +}; + +#define CP15R0_VENDOR_MASK 0xffffe000 + +#if defined(CONFIG_ARCH_PXA) +#define CP15R0_XSCALE_VALUE 0x69052000 /* intel/arm/xscale */ + +#elif defined(CONFIG_ARCH_IXP4XX) +#define CP15R0_XSCALE_VALUE 0x69054000 /* intel/arm/ixp4xx */ + +#endif + +#define CP15R0_PROD_MASK 0x000003f0 +#define PXA25x 0x00000100 /* and PXA26x */ +#define PXA210 0x00000120 + +#define CP15R0_REV_MASK 0x0000000f + +#define CP15R0_PRODREV_MASK (CP15R0_PROD_MASK | CP15R0_REV_MASK) + +#define PXA255_A0 0x00000106 /* or PXA260_B1 */ +#define PXA250_C0 0x00000105 /* or PXA26x_B0 */ +#define PXA250_B2 0x00000104 +#define PXA250_B1 0x00000103 /* or PXA260_A0 */ +#define PXA250_B0 0x00000102 +#define PXA250_A1 0x00000101 +#define PXA250_A0 0x00000100 + +#define PXA210_C0 0x00000125 +#define PXA210_B2 0x00000124 +#define PXA210_B1 0x00000123 +#define PXA210_B0 0x00000122 +#define IXP425_A0 0x000001c1 +#define IXP425_B0 0x000001f1 +#define IXP465_AD 0x00000200 + +/* + * probe - binds to the platform device + */ +static int __init pxa25x_udc_probe(struct platform_device *pdev) +{ + struct pxa25x_udc *dev = &memory; + int retval, vbus_irq, irq; + u32 chiprev; + + /* insist on Intel/ARM/XScale */ + asm("mrc%? p15, 0, %0, c0, c0" : "=r" (chiprev)); + if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) { + pr_err("%s: not XScale!\n", driver_name); + return -ENODEV; + } + + /* trigger chiprev-specific logic */ + switch (chiprev & CP15R0_PRODREV_MASK) { +#if defined(CONFIG_ARCH_PXA) + case PXA255_A0: + dev->has_cfr = 1; + break; + case PXA250_A0: + case PXA250_A1: + /* A0/A1 "not released"; ep 13, 15 unusable */ + /* fall through */ + case PXA250_B2: case PXA210_B2: + case PXA250_B1: case PXA210_B1: + case PXA250_B0: case PXA210_B0: + /* OUT-DMA is broken ... */ + /* fall through */ + case PXA250_C0: case PXA210_C0: + break; +#elif defined(CONFIG_ARCH_IXP4XX) + case IXP425_A0: + case IXP425_B0: + case IXP465_AD: + dev->has_cfr = 1; + break; +#endif + default: + pr_err("%s: unrecognized processor: %08x\n", + driver_name, chiprev); + /* iop3xx, ixp4xx, ... */ + return -ENODEV; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return -ENODEV; + + dev->clk = clk_get(&pdev->dev, "UDCCLK"); + if (IS_ERR(dev->clk)) { + retval = PTR_ERR(dev->clk); + goto err_clk; + } + + pr_debug("%s: IRQ %d%s%s\n", driver_name, irq, + dev->has_cfr ? "" : " (!cfr)", + SIZE_STR "(pio)" + ); + + /* other non-static parts of init */ + dev->dev = &pdev->dev; + dev->mach = pdev->dev.platform_data; + + if (dev->mach->gpio_vbus) { + if ((retval = gpio_request(dev->mach->gpio_vbus, + "pxa25x_udc GPIO VBUS"))) { + dev_dbg(&pdev->dev, + "can't get vbus gpio %d, err: %d\n", + dev->mach->gpio_vbus, retval); + goto err_gpio_vbus; + } + gpio_direction_input(dev->mach->gpio_vbus); + vbus_irq = gpio_to_irq(dev->mach->gpio_vbus); + } else + vbus_irq = 0; + + if (dev->mach->gpio_pullup) { + if ((retval = gpio_request(dev->mach->gpio_pullup, + "pca25x_udc GPIO PULLUP"))) { + dev_dbg(&pdev->dev, + "can't get pullup gpio %d, err: %d\n", + dev->mach->gpio_pullup, retval); + goto err_gpio_pullup; + } + gpio_direction_output(dev->mach->gpio_pullup, 0); + } + + init_timer(&dev->timer); + dev->timer.function = udc_watchdog; + dev->timer.data = (unsigned long) dev; + + device_initialize(&dev->gadget.dev); + dev->gadget.dev.parent = &pdev->dev; + dev->gadget.dev.dma_mask = pdev->dev.dma_mask; + + the_controller = dev; + platform_set_drvdata(pdev, dev); + + udc_disable(dev); + udc_reinit(dev); + + dev->vbus = is_vbus_present(); + + /* irq setup after old hardware state is cleaned up */ + retval = request_irq(irq, pxa25x_udc_irq, + IRQF_DISABLED, driver_name, dev); + if (retval != 0) { + pr_err("%s: can't get irq %d, err %d\n", + driver_name, irq, retval); + goto err_irq1; + } + dev->got_irq = 1; + +#ifdef CONFIG_ARCH_LUBBOCK + if (machine_is_lubbock()) { + retval = request_irq(LUBBOCK_USB_DISC_IRQ, + lubbock_vbus_irq, + IRQF_DISABLED | IRQF_SAMPLE_RANDOM, + driver_name, dev); + if (retval != 0) { + pr_err("%s: can't get irq %i, err %d\n", + driver_name, LUBBOCK_USB_DISC_IRQ, retval); +lubbock_fail0: + goto err_irq_lub; + } + retval = request_irq(LUBBOCK_USB_IRQ, + lubbock_vbus_irq, + IRQF_DISABLED | IRQF_SAMPLE_RANDOM, + driver_name, dev); + if (retval != 0) { + pr_err("%s: can't get irq %i, err %d\n", + driver_name, LUBBOCK_USB_IRQ, retval); + free_irq(LUBBOCK_USB_DISC_IRQ, dev); + goto lubbock_fail0; + } + } else +#endif + if (vbus_irq) { + retval = request_irq(vbus_irq, udc_vbus_irq, + IRQF_DISABLED | IRQF_SAMPLE_RANDOM | + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + driver_name, dev); + if (retval != 0) { + pr_err("%s: can't get irq %i, err %d\n", + driver_name, vbus_irq, retval); + goto err_vbus_irq; + } + } + create_debug_files(dev); + + return 0; + + err_vbus_irq: +#ifdef CONFIG_ARCH_LUBBOCK + free_irq(LUBBOCK_USB_DISC_IRQ, dev); + err_irq_lub: +#endif + free_irq(irq, dev); + err_irq1: + if (dev->mach->gpio_pullup) + gpio_free(dev->mach->gpio_pullup); + err_gpio_pullup: + if (dev->mach->gpio_vbus) + gpio_free(dev->mach->gpio_vbus); + err_gpio_vbus: + clk_put(dev->clk); + err_clk: + return retval; +} + +static void pxa25x_udc_shutdown(struct platform_device *_dev) +{ + pullup_off(); +} + +static int __exit pxa25x_udc_remove(struct platform_device *pdev) +{ + struct pxa25x_udc *dev = platform_get_drvdata(pdev); + + if (dev->driver) + return -EBUSY; + + dev->pullup = 0; + pullup(dev); + + remove_debug_files(dev); + + if (dev->got_irq) { + free_irq(platform_get_irq(pdev, 0), dev); + dev->got_irq = 0; + } +#ifdef CONFIG_ARCH_LUBBOCK + if (machine_is_lubbock()) { + free_irq(LUBBOCK_USB_DISC_IRQ, dev); + free_irq(LUBBOCK_USB_IRQ, dev); + } +#endif + if (dev->mach->gpio_vbus) { + free_irq(gpio_to_irq(dev->mach->gpio_vbus), dev); + gpio_free(dev->mach->gpio_vbus); + } + if (dev->mach->gpio_pullup) + gpio_free(dev->mach->gpio_pullup); + + clk_put(dev->clk); + + platform_set_drvdata(pdev, NULL); + the_controller = NULL; + return 0; +} + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_PM + +/* USB suspend (controlled by the host) and system suspend (controlled + * by the PXA) don't necessarily work well together. If USB is active, + * the 48 MHz clock is required; so the system can't enter 33 MHz idle + * mode, or any deeper PM saving state. + * + * For now, we punt and forcibly disconnect from the USB host when PXA + * enters any suspend state. While we're disconnected, we always disable + * the 48MHz USB clock ... allowing PXA sleep and/or 33 MHz idle states. + * Boards without software pullup control shouldn't use those states. + * VBUS IRQs should probably be ignored so that the PXA device just acts + * "dead" to USB hosts until system resume. + */ +static int pxa25x_udc_suspend(struct platform_device *dev, pm_message_t state) +{ + struct pxa25x_udc *udc = platform_get_drvdata(dev); + unsigned long flags; + + if (!udc->mach->gpio_pullup && !udc->mach->udc_command) + WARN("USB host won't detect disconnect!\n"); + udc->suspended = 1; + + local_irq_save(flags); + pullup(udc); + local_irq_restore(flags); + + return 0; +} + +static int pxa25x_udc_resume(struct platform_device *dev) +{ + struct pxa25x_udc *udc = platform_get_drvdata(dev); + unsigned long flags; + + udc->suspended = 0; + local_irq_save(flags); + pullup(udc); + local_irq_restore(flags); + + return 0; +} + +#else +#define pxa25x_udc_suspend NULL +#define pxa25x_udc_resume NULL +#endif + +/*-------------------------------------------------------------------------*/ + +static struct platform_driver udc_driver = { + .shutdown = pxa25x_udc_shutdown, + .remove = __exit_p(pxa25x_udc_remove), + .suspend = pxa25x_udc_suspend, + .resume = pxa25x_udc_resume, + .driver = { + .owner = THIS_MODULE, + .name = "pxa25x-udc", + }, +}; + +static int __init udc_init(void) +{ + pr_info("%s: version %s\n", driver_name, DRIVER_VERSION); + return platform_driver_probe(&udc_driver, pxa25x_udc_probe); +} +module_init(udc_init); + +static void __exit udc_exit(void) +{ + platform_driver_unregister(&udc_driver); +} +module_exit(udc_exit); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pxa25x-udc"); diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h new file mode 100644 index 000000000000..4d11ece7c95f --- /dev/null +++ b/drivers/usb/gadget/pxa25x_udc.h @@ -0,0 +1,266 @@ +/* + * Intel PXA25x on-chip full speed USB device controller + * + * Copyright (C) 2003 Robert Schwebel , Pengutronix + * Copyright (C) 2003 David Brownell + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_USB_GADGET_PXA25X_H +#define __LINUX_USB_GADGET_PXA25X_H + +#include + +/*-------------------------------------------------------------------------*/ + +/* pxa25x has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */ +#define UFNRH_SIR (1 << 7) /* SOF interrupt request */ +#define UFNRH_SIM (1 << 6) /* SOF interrupt mask */ +#define UFNRH_IPE14 (1 << 5) /* ISO packet error, ep14 */ +#define UFNRH_IPE9 (1 << 4) /* ISO packet error, ep9 */ +#define UFNRH_IPE4 (1 << 3) /* ISO packet error, ep4 */ + +/* pxa255 has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */ +#define UDCCFR UDC_RES2 /* UDC Control Function Register */ +#define UDCCFR_AREN (1 << 7) /* ACK response enable (now) */ +#define UDCCFR_ACM (1 << 2) /* ACK control mode (wait for AREN) */ + +/* latest pxa255 errata define new "must be one" bits in UDCCFR */ +#define UDCCFR_MB1 (0xff & ~(UDCCFR_AREN|UDCCFR_ACM)) + +/*-------------------------------------------------------------------------*/ + +struct pxa25x_udc; + +struct pxa25x_ep { + struct usb_ep ep; + struct pxa25x_udc *dev; + + const struct usb_endpoint_descriptor *desc; + struct list_head queue; + unsigned long pio_irqs; + + unsigned short fifo_size; + u8 bEndpointAddress; + u8 bmAttributes; + + unsigned stopped : 1; + unsigned dma_fixup : 1; + + /* UDCCS = UDC Control/Status for this EP + * UBCR = UDC Byte Count Remaining (contents of OUT fifo) + * UDDR = UDC Endpoint Data Register (the fifo) + * DRCM = DMA Request Channel Map + */ + volatile u32 *reg_udccs; + volatile u32 *reg_ubcr; + volatile u32 *reg_uddr; +}; + +struct pxa25x_request { + struct usb_request req; + struct list_head queue; +}; + +enum ep0_state { + EP0_IDLE, + EP0_IN_DATA_PHASE, + EP0_OUT_DATA_PHASE, + EP0_END_XFER, + EP0_STALL, +}; + +#define EP0_FIFO_SIZE ((unsigned)16) +#define BULK_FIFO_SIZE ((unsigned)64) +#define ISO_FIFO_SIZE ((unsigned)256) +#define INT_FIFO_SIZE ((unsigned)8) + +struct udc_stats { + struct ep0stats { + unsigned long ops; + unsigned long bytes; + } read, write; + unsigned long irqs; +}; + +#ifdef CONFIG_USB_PXA25X_SMALL +/* when memory's tight, SMALL config saves code+data. */ +#define PXA_UDC_NUM_ENDPOINTS 3 +#endif + +#ifndef PXA_UDC_NUM_ENDPOINTS +#define PXA_UDC_NUM_ENDPOINTS 16 +#endif + +struct pxa25x_udc { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + + enum ep0_state ep0state; + struct udc_stats stats; + unsigned got_irq : 1, + vbus : 1, + pullup : 1, + has_cfr : 1, + req_pending : 1, + req_std : 1, + req_config : 1, + suspended : 1, + active : 1; + +#define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200)) + struct timer_list timer; + + struct device *dev; + struct clk *clk; + struct pxa2xx_udc_mach_info *mach; + u64 dma_mask; + struct pxa25x_ep ep [PXA_UDC_NUM_ENDPOINTS]; + +#ifdef CONFIG_USB_GADGET_DEBUG_FS + struct dentry *debugfs_udc; +#endif +}; + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_ARCH_LUBBOCK +#include +/* lubbock can also report usb connect/disconnect irqs */ +#endif + +static struct pxa25x_udc *the_controller; + +/*-------------------------------------------------------------------------*/ + +/* + * Debugging support vanishes in non-debug builds. DBG_NORMAL should be + * mostly silent during normal use/testing, with no timing side-effects. + */ +#define DBG_NORMAL 1 /* error paths, device state transitions */ +#define DBG_VERBOSE 2 /* add some success path trace info */ +#define DBG_NOISY 3 /* ... even more: request level */ +#define DBG_VERY_NOISY 4 /* ... even more: packet level */ + +#define DMSG(stuff...) pr_debug("udc: " stuff) + +#ifdef DEBUG + +static int is_vbus_present(void); + +static const char *state_name[] = { + "EP0_IDLE", + "EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE", + "EP0_END_XFER", "EP0_STALL" +}; + +#ifdef VERBOSE_DEBUG +# define UDC_DEBUG DBG_VERBOSE +#else +# define UDC_DEBUG DBG_NORMAL +#endif + +static void __maybe_unused +dump_udccr(const char *label) +{ + u32 udccr = UDCCR; + DMSG("%s %02X =%s%s%s%s%s%s%s%s\n", + label, udccr, + (udccr & UDCCR_REM) ? " rem" : "", + (udccr & UDCCR_RSTIR) ? " rstir" : "", + (udccr & UDCCR_SRM) ? " srm" : "", + (udccr & UDCCR_SUSIR) ? " susir" : "", + (udccr & UDCCR_RESIR) ? " resir" : "", + (udccr & UDCCR_RSM) ? " rsm" : "", + (udccr & UDCCR_UDA) ? " uda" : "", + (udccr & UDCCR_UDE) ? " ude" : ""); +} + +static void __maybe_unused +dump_udccs0(const char *label) +{ + u32 udccs0 = UDCCS0; + + DMSG("%s %s %02X =%s%s%s%s%s%s%s%s\n", + label, state_name[the_controller->ep0state], udccs0, + (udccs0 & UDCCS0_SA) ? " sa" : "", + (udccs0 & UDCCS0_RNE) ? " rne" : "", + (udccs0 & UDCCS0_FST) ? " fst" : "", + (udccs0 & UDCCS0_SST) ? " sst" : "", + (udccs0 & UDCCS0_DRWF) ? " dwrf" : "", + (udccs0 & UDCCS0_FTF) ? " ftf" : "", + (udccs0 & UDCCS0_IPR) ? " ipr" : "", + (udccs0 & UDCCS0_OPR) ? " opr" : ""); +} + +static void __maybe_unused +dump_state(struct pxa25x_udc *dev) +{ + u32 tmp; + unsigned i; + + DMSG("%s %s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n", + is_vbus_present() ? "host " : "disconnected", + state_name[dev->ep0state], + UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL); + dump_udccr("udccr"); + if (dev->has_cfr) { + tmp = UDCCFR; + DMSG("udccfr %02X =%s%s\n", tmp, + (tmp & UDCCFR_AREN) ? " aren" : "", + (tmp & UDCCFR_ACM) ? " acm" : ""); + } + + if (!dev->driver) { + DMSG("no gadget driver bound\n"); + return; + } else + DMSG("ep0 driver '%s'\n", dev->driver->driver.name); + + if (!is_vbus_present()) + return; + + dump_udccs0 ("udccs0"); + DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n", + dev->stats.write.bytes, dev->stats.write.ops, + dev->stats.read.bytes, dev->stats.read.ops); + + for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) { + if (dev->ep [i].desc == NULL) + continue; + DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccs); + } +} + +#else + +#define dump_udccr(x) do{}while(0) +#define dump_udccs0(x) do{}while(0) +#define dump_state(x) do{}while(0) + +#define UDC_DEBUG ((unsigned)0) + +#endif + +#define DBG(lvl, stuff...) do{if ((lvl) <= UDC_DEBUG) DMSG(stuff);}while(0) + +#define ERR(stuff...) pr_err("udc: " stuff) +#define WARN(stuff...) pr_warning("udc: " stuff) +#define INFO(stuff...) pr_info("udc: " stuff) + + +#endif /* __LINUX_USB_GADGET_PXA25X_H */ diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 40d6b580f152..4771b1314d54 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -2367,11 +2367,11 @@ static int pxa_udc_resume(struct platform_device *_dev) #endif /* work with hotplug and coldplug */ -MODULE_ALIAS("platform:pxa2xx-udc"); +MODULE_ALIAS("platform:pxa27x-udc"); static struct platform_driver udc_driver = { .driver = { - .name = "pxa2xx-udc", + .name = "pxa27x-udc", .owner = THIS_MODULE, }, .remove = __exit_p(pxa_udc_remove), diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c deleted file mode 100644 index 63db96adc0b0..000000000000 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ /dev/null @@ -1,2389 +0,0 @@ -/* - * linux/drivers/usb/gadget/pxa2xx_udc.c - * Intel PXA25x and IXP4xx on-chip full speed USB device controllers - * - * Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker) - * Copyright (C) 2003 Robert Schwebel, Pengutronix - * Copyright (C) 2003 Benedikt Spranger, Pengutronix - * Copyright (C) 2003 David Brownell - * Copyright (C) 2003 Joshua Wise - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -/* #define VERBOSE_DEBUG */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include -#include - -/* - * This driver is PXA25x only. Grab the right register definitions. - */ -#ifdef CONFIG_ARCH_PXA -#include -#endif - -#include - - -/* - * This driver handles the USB Device Controller (UDC) in Intel's PXA 25x - * series processors. The UDC for the IXP 4xx series is very similar. - * There are fifteen endpoints, in addition to ep0. - * - * Such controller drivers work with a gadget driver. The gadget driver - * returns descriptors, implements configuration and data protocols used - * by the host to interact with this device, and allocates endpoints to - * the different protocol interfaces. The controller driver virtualizes - * usb hardware so that the gadget drivers will be more portable. - * - * This UDC hardware wants to implement a bit too much USB protocol, so - * it constrains the sorts of USB configuration change events that work. - * The errata for these chips are misleading; some "fixed" bugs from - * pxa250 a0/a1 b0/b1/b2 sure act like they're still there. - * - * Note that the UDC hardware supports DMA (except on IXP) but that's - * not used here. IN-DMA (to host) is simple enough, when the data is - * suitably aligned (16 bytes) ... the network stack doesn't do that, - * other software can. OUT-DMA is buggy in most chip versions, as well - * as poorly designed (data toggle not automatic). So this driver won't - * bother using DMA. (Mostly-working IN-DMA support was available in - * kernels before 2.6.23, but was never enabled or well tested.) - */ - -#define DRIVER_VERSION "30-June-2007" -#define DRIVER_DESC "PXA 25x USB Device Controller driver" - - -static const char driver_name [] = "pxa2xx_udc"; - -static const char ep0name [] = "ep0"; - - -#ifdef CONFIG_ARCH_IXP4XX - -/* cpu-specific register addresses are compiled in to this code */ -#ifdef CONFIG_ARCH_PXA -#error "Can't configure both IXP and PXA" -#endif - -/* IXP doesn't yet support */ -#define clk_get(dev,name) NULL -#define clk_enable(clk) do { } while (0) -#define clk_disable(clk) do { } while (0) -#define clk_put(clk) do { } while (0) - -#endif - -#include "pxa2xx_udc.h" - - -#ifdef CONFIG_USB_PXA2XX_SMALL -#define SIZE_STR " (small)" -#else -#define SIZE_STR "" -#endif - -/* --------------------------------------------------------------------------- - * endpoint related parts of the api to the usb controller hardware, - * used by gadget driver; and the inner talker-to-hardware core. - * --------------------------------------------------------------------------- - */ - -static void pxa2xx_ep_fifo_flush (struct usb_ep *ep); -static void nuke (struct pxa2xx_ep *, int status); - -/* one GPIO should be used to detect VBUS from the host */ -static int is_vbus_present(void) -{ - struct pxa2xx_udc_mach_info *mach = the_controller->mach; - - if (mach->gpio_vbus) { - int value = gpio_get_value(mach->gpio_vbus); - return mach->gpio_vbus_inverted ? !value : value; - } - if (mach->udc_is_connected) - return mach->udc_is_connected(); - return 1; -} - -/* one GPIO should control a D+ pullup, so host sees this device (or not) */ -static void pullup_off(void) -{ - struct pxa2xx_udc_mach_info *mach = the_controller->mach; - - if (mach->gpio_pullup) - gpio_set_value(mach->gpio_pullup, 0); - else if (mach->udc_command) - mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); -} - -static void pullup_on(void) -{ - struct pxa2xx_udc_mach_info *mach = the_controller->mach; - - if (mach->gpio_pullup) - gpio_set_value(mach->gpio_pullup, 1); - else if (mach->udc_command) - mach->udc_command(PXA2XX_UDC_CMD_CONNECT); -} - -static void pio_irq_enable(int bEndpointAddress) -{ - bEndpointAddress &= 0xf; - if (bEndpointAddress < 8) - UICR0 &= ~(1 << bEndpointAddress); - else { - bEndpointAddress -= 8; - UICR1 &= ~(1 << bEndpointAddress); - } -} - -static void pio_irq_disable(int bEndpointAddress) -{ - bEndpointAddress &= 0xf; - if (bEndpointAddress < 8) - UICR0 |= 1 << bEndpointAddress; - else { - bEndpointAddress -= 8; - UICR1 |= 1 << bEndpointAddress; - } -} - -/* The UDCCR reg contains mask and interrupt status bits, - * so using '|=' isn't safe as it may ack an interrupt. - */ -#define UDCCR_MASK_BITS (UDCCR_REM | UDCCR_SRM | UDCCR_UDE) - -static inline void udc_set_mask_UDCCR(int mask) -{ - UDCCR = (UDCCR & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS); -} - -static inline void udc_clear_mask_UDCCR(int mask) -{ - UDCCR = (UDCCR & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS); -} - -static inline void udc_ack_int_UDCCR(int mask) -{ - /* udccr contains the bits we dont want to change */ - __u32 udccr = UDCCR & UDCCR_MASK_BITS; - - UDCCR = udccr | (mask & ~UDCCR_MASK_BITS); -} - -/* - * endpoint enable/disable - * - * we need to verify the descriptors used to enable endpoints. since pxa2xx - * endpoint configurations are fixed, and are pretty much always enabled, - * there's not a lot to manage here. - * - * because pxa2xx can't selectively initialize bulk (or interrupt) endpoints, - * (resetting endpoint halt and toggle), SET_INTERFACE is unusable except - * for a single interface (with only the default altsetting) and for gadget - * drivers that don't halt endpoints (not reset by set_interface). that also - * means that if you use ISO, you must violate the USB spec rule that all - * iso endpoints must be in non-default altsettings. - */ -static int pxa2xx_ep_enable (struct usb_ep *_ep, - const struct usb_endpoint_descriptor *desc) -{ - struct pxa2xx_ep *ep; - struct pxa2xx_udc *dev; - - ep = container_of (_ep, struct pxa2xx_ep, ep); - if (!_ep || !desc || ep->desc || _ep->name == ep0name - || desc->bDescriptorType != USB_DT_ENDPOINT - || ep->bEndpointAddress != desc->bEndpointAddress - || ep->fifo_size < le16_to_cpu - (desc->wMaxPacketSize)) { - DMSG("%s, bad ep or descriptor\n", __func__); - return -EINVAL; - } - - /* xfer types must match, except that interrupt ~= bulk */ - if (ep->bmAttributes != desc->bmAttributes - && ep->bmAttributes != USB_ENDPOINT_XFER_BULK - && desc->bmAttributes != USB_ENDPOINT_XFER_INT) { - DMSG("%s, %s type mismatch\n", __func__, _ep->name); - return -EINVAL; - } - - /* hardware _could_ do smaller, but driver doesn't */ - if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK - && le16_to_cpu (desc->wMaxPacketSize) - != BULK_FIFO_SIZE) - || !desc->wMaxPacketSize) { - DMSG("%s, bad %s maxpacket\n", __func__, _ep->name); - return -ERANGE; - } - - dev = ep->dev; - if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { - DMSG("%s, bogus device state\n", __func__); - return -ESHUTDOWN; - } - - ep->desc = desc; - ep->stopped = 0; - ep->pio_irqs = 0; - ep->ep.maxpacket = le16_to_cpu (desc->wMaxPacketSize); - - /* flush fifo (mostly for OUT buffers) */ - pxa2xx_ep_fifo_flush (_ep); - - /* ... reset halt state too, if we could ... */ - - DBG(DBG_VERBOSE, "enabled %s\n", _ep->name); - return 0; -} - -static int pxa2xx_ep_disable (struct usb_ep *_ep) -{ - struct pxa2xx_ep *ep; - unsigned long flags; - - ep = container_of (_ep, struct pxa2xx_ep, ep); - if (!_ep || !ep->desc) { - DMSG("%s, %s not enabled\n", __func__, - _ep ? ep->ep.name : NULL); - return -EINVAL; - } - local_irq_save(flags); - - nuke (ep, -ESHUTDOWN); - - /* flush fifo (mostly for IN buffers) */ - pxa2xx_ep_fifo_flush (_ep); - - ep->desc = NULL; - ep->stopped = 1; - - local_irq_restore(flags); - DBG(DBG_VERBOSE, "%s disabled\n", _ep->name); - return 0; -} - -/*-------------------------------------------------------------------------*/ - -/* for the pxa2xx, these can just wrap kmalloc/kfree. gadget drivers - * must still pass correctly initialized endpoints, since other controller - * drivers may care about how it's currently set up (dma issues etc). - */ - -/* - * pxa2xx_ep_alloc_request - allocate a request data structure - */ -static struct usb_request * -pxa2xx_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags) -{ - struct pxa2xx_request *req; - - req = kzalloc(sizeof(*req), gfp_flags); - if (!req) - return NULL; - - INIT_LIST_HEAD (&req->queue); - return &req->req; -} - - -/* - * pxa2xx_ep_free_request - deallocate a request data structure - */ -static void -pxa2xx_ep_free_request (struct usb_ep *_ep, struct usb_request *_req) -{ - struct pxa2xx_request *req; - - req = container_of (_req, struct pxa2xx_request, req); - WARN_ON (!list_empty (&req->queue)); - kfree(req); -} - -/*-------------------------------------------------------------------------*/ - -/* - * done - retire a request; caller blocked irqs - */ -static void done(struct pxa2xx_ep *ep, struct pxa2xx_request *req, int status) -{ - unsigned stopped = ep->stopped; - - list_del_init(&req->queue); - - if (likely (req->req.status == -EINPROGRESS)) - req->req.status = status; - else - status = req->req.status; - - if (status && status != -ESHUTDOWN) - DBG(DBG_VERBOSE, "complete %s req %p stat %d len %u/%u\n", - ep->ep.name, &req->req, status, - req->req.actual, req->req.length); - - /* don't modify queue heads during completion callback */ - ep->stopped = 1; - req->req.complete(&ep->ep, &req->req); - ep->stopped = stopped; -} - - -static inline void ep0_idle (struct pxa2xx_udc *dev) -{ - dev->ep0state = EP0_IDLE; -} - -static int -write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max) -{ - u8 *buf; - unsigned length, count; - - buf = req->req.buf + req->req.actual; - prefetch(buf); - - /* how big will this packet be? */ - length = min(req->req.length - req->req.actual, max); - req->req.actual += length; - - count = length; - while (likely(count--)) - *uddr = *buf++; - - return length; -} - -/* - * write to an IN endpoint fifo, as many packets as possible. - * irqs will use this to write the rest later. - * caller guarantees at least one packet buffer is ready (or a zlp). - */ -static int -write_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req) -{ - unsigned max; - - max = le16_to_cpu(ep->desc->wMaxPacketSize); - do { - unsigned count; - int is_last, is_short; - - count = write_packet(ep->reg_uddr, req, max); - - /* last packet is usually short (or a zlp) */ - if (unlikely (count != max)) - is_last = is_short = 1; - else { - if (likely(req->req.length != req->req.actual) - || req->req.zero) - is_last = 0; - else - is_last = 1; - /* interrupt/iso maxpacket may not fill the fifo */ - is_short = unlikely (max < ep->fifo_size); - } - - DBG(DBG_VERY_NOISY, "wrote %s %d bytes%s%s %d left %p\n", - ep->ep.name, count, - is_last ? "/L" : "", is_short ? "/S" : "", - req->req.length - req->req.actual, req); - - /* let loose that packet. maybe try writing another one, - * double buffering might work. TSP, TPC, and TFS - * bit values are the same for all normal IN endpoints. - */ - *ep->reg_udccs = UDCCS_BI_TPC; - if (is_short) - *ep->reg_udccs = UDCCS_BI_TSP; - - /* requests complete when all IN data is in the FIFO */ - if (is_last) { - done (ep, req, 0); - if (list_empty(&ep->queue)) - pio_irq_disable (ep->bEndpointAddress); - return 1; - } - - // TODO experiment: how robust can fifo mode tweaking be? - // double buffering is off in the default fifo mode, which - // prevents TFS from being set here. - - } while (*ep->reg_udccs & UDCCS_BI_TFS); - return 0; -} - -/* caller asserts req->pending (ep0 irq status nyet cleared); starts - * ep0 data stage. these chips want very simple state transitions. - */ -static inline -void ep0start(struct pxa2xx_udc *dev, u32 flags, const char *tag) -{ - UDCCS0 = flags|UDCCS0_SA|UDCCS0_OPR; - USIR0 = USIR0_IR0; - dev->req_pending = 0; - DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n", - __func__, tag, UDCCS0, flags); -} - -static int -write_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req) -{ - unsigned count; - int is_short; - - count = write_packet(&UDDR0, req, EP0_FIFO_SIZE); - ep->dev->stats.write.bytes += count; - - /* last packet "must be" short (or a zlp) */ - is_short = (count != EP0_FIFO_SIZE); - - DBG(DBG_VERY_NOISY, "ep0in %d bytes %d left %p\n", count, - req->req.length - req->req.actual, req); - - if (unlikely (is_short)) { - if (ep->dev->req_pending) - ep0start(ep->dev, UDCCS0_IPR, "short IN"); - else - UDCCS0 = UDCCS0_IPR; - - count = req->req.length; - done (ep, req, 0); - ep0_idle(ep->dev); -#ifndef CONFIG_ARCH_IXP4XX -#if 1 - /* This seems to get rid of lost status irqs in some cases: - * host responds quickly, or next request involves config - * change automagic, or should have been hidden, or ... - * - * FIXME get rid of all udelays possible... - */ - if (count >= EP0_FIFO_SIZE) { - count = 100; - do { - if ((UDCCS0 & UDCCS0_OPR) != 0) { - /* clear OPR, generate ack */ - UDCCS0 = UDCCS0_OPR; - break; - } - count--; - udelay(1); - } while (count); - } -#endif -#endif - } else if (ep->dev->req_pending) - ep0start(ep->dev, 0, "IN"); - return is_short; -} - - -/* - * read_fifo - unload packet(s) from the fifo we use for usb OUT - * transfers and put them into the request. caller should have made - * sure there's at least one packet ready. - * - * returns true if the request completed because of short packet or the - * request buffer having filled (and maybe overran till end-of-packet). - */ -static int -read_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req) -{ - for (;;) { - u32 udccs; - u8 *buf; - unsigned bufferspace, count, is_short; - - /* make sure there's a packet in the FIFO. - * UDCCS_{BO,IO}_RPC are all the same bit value. - * UDCCS_{BO,IO}_RNE are all the same bit value. - */ - udccs = *ep->reg_udccs; - if (unlikely ((udccs & UDCCS_BO_RPC) == 0)) - break; - buf = req->req.buf + req->req.actual; - prefetchw(buf); - bufferspace = req->req.length - req->req.actual; - - /* read all bytes from this packet */ - if (likely (udccs & UDCCS_BO_RNE)) { - count = 1 + (0x0ff & *ep->reg_ubcr); - req->req.actual += min (count, bufferspace); - } else /* zlp */ - count = 0; - is_short = (count < ep->ep.maxpacket); - DBG(DBG_VERY_NOISY, "read %s %02x, %d bytes%s req %p %d/%d\n", - ep->ep.name, udccs, count, - is_short ? "/S" : "", - req, req->req.actual, req->req.length); - while (likely (count-- != 0)) { - u8 byte = (u8) *ep->reg_uddr; - - if (unlikely (bufferspace == 0)) { - /* this happens when the driver's buffer - * is smaller than what the host sent. - * discard the extra data. - */ - if (req->req.status != -EOVERFLOW) - DMSG("%s overflow %d\n", - ep->ep.name, count); - req->req.status = -EOVERFLOW; - } else { - *buf++ = byte; - bufferspace--; - } - } - *ep->reg_udccs = UDCCS_BO_RPC; - /* RPC/RSP/RNE could now reflect the other packet buffer */ - - /* iso is one request per packet */ - if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) { - if (udccs & UDCCS_IO_ROF) - req->req.status = -EHOSTUNREACH; - /* more like "is_done" */ - is_short = 1; - } - - /* completion */ - if (is_short || req->req.actual == req->req.length) { - done (ep, req, 0); - if (list_empty(&ep->queue)) - pio_irq_disable (ep->bEndpointAddress); - return 1; - } - - /* finished that packet. the next one may be waiting... */ - } - return 0; -} - -/* - * special ep0 version of the above. no UBCR0 or double buffering; status - * handshaking is magic. most device protocols don't need control-OUT. - * CDC vendor commands (and RNDIS), mass storage CB/CBI, and some other - * protocols do use them. - */ -static int -read_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req) -{ - u8 *buf, byte; - unsigned bufferspace; - - buf = req->req.buf + req->req.actual; - bufferspace = req->req.length - req->req.actual; - - while (UDCCS0 & UDCCS0_RNE) { - byte = (u8) UDDR0; - - if (unlikely (bufferspace == 0)) { - /* this happens when the driver's buffer - * is smaller than what the host sent. - * discard the extra data. - */ - if (req->req.status != -EOVERFLOW) - DMSG("%s overflow\n", ep->ep.name); - req->req.status = -EOVERFLOW; - } else { - *buf++ = byte; - req->req.actual++; - bufferspace--; - } - } - - UDCCS0 = UDCCS0_OPR | UDCCS0_IPR; - - /* completion */ - if (req->req.actual >= req->req.length) - return 1; - - /* finished that packet. the next one may be waiting... */ - return 0; -} - -/*-------------------------------------------------------------------------*/ - -static int -pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) -{ - struct pxa2xx_request *req; - struct pxa2xx_ep *ep; - struct pxa2xx_udc *dev; - unsigned long flags; - - req = container_of(_req, struct pxa2xx_request, req); - if (unlikely (!_req || !_req->complete || !_req->buf - || !list_empty(&req->queue))) { - DMSG("%s, bad params\n", __func__); - return -EINVAL; - } - - ep = container_of(_ep, struct pxa2xx_ep, ep); - if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) { - DMSG("%s, bad ep\n", __func__); - return -EINVAL; - } - - dev = ep->dev; - if (unlikely (!dev->driver - || dev->gadget.speed == USB_SPEED_UNKNOWN)) { - DMSG("%s, bogus device state\n", __func__); - return -ESHUTDOWN; - } - - /* iso is always one packet per request, that's the only way - * we can report per-packet status. that also helps with dma. - */ - if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC - && req->req.length > le16_to_cpu - (ep->desc->wMaxPacketSize))) - return -EMSGSIZE; - - DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n", - _ep->name, _req, _req->length, _req->buf); - - local_irq_save(flags); - - _req->status = -EINPROGRESS; - _req->actual = 0; - - /* kickstart this i/o queue? */ - if (list_empty(&ep->queue) && !ep->stopped) { - if (ep->desc == NULL/* ep0 */) { - unsigned length = _req->length; - - switch (dev->ep0state) { - case EP0_IN_DATA_PHASE: - dev->stats.write.ops++; - if (write_ep0_fifo(ep, req)) - req = NULL; - break; - - case EP0_OUT_DATA_PHASE: - dev->stats.read.ops++; - /* messy ... */ - if (dev->req_config) { - DBG(DBG_VERBOSE, "ep0 config ack%s\n", - dev->has_cfr ? "" : " raced"); - if (dev->has_cfr) - UDCCFR = UDCCFR_AREN|UDCCFR_ACM - |UDCCFR_MB1; - done(ep, req, 0); - dev->ep0state = EP0_END_XFER; - local_irq_restore (flags); - return 0; - } - if (dev->req_pending) - ep0start(dev, UDCCS0_IPR, "OUT"); - if (length == 0 || ((UDCCS0 & UDCCS0_RNE) != 0 - && read_ep0_fifo(ep, req))) { - ep0_idle(dev); - done(ep, req, 0); - req = NULL; - } - break; - - default: - DMSG("ep0 i/o, odd state %d\n", dev->ep0state); - local_irq_restore (flags); - return -EL2HLT; - } - /* can the FIFO can satisfy the request immediately? */ - } else if ((ep->bEndpointAddress & USB_DIR_IN) != 0) { - if ((*ep->reg_udccs & UDCCS_BI_TFS) != 0 - && write_fifo(ep, req)) - req = NULL; - } else if ((*ep->reg_udccs & UDCCS_BO_RFS) != 0 - && read_fifo(ep, req)) { - req = NULL; - } - - if (likely (req && ep->desc)) - pio_irq_enable(ep->bEndpointAddress); - } - - /* pio or dma irq handler advances the queue. */ - if (likely(req != NULL)) - list_add_tail(&req->queue, &ep->queue); - local_irq_restore(flags); - - return 0; -} - - -/* - * nuke - dequeue ALL requests - */ -static void nuke(struct pxa2xx_ep *ep, int status) -{ - struct pxa2xx_request *req; - - /* called with irqs blocked */ - while (!list_empty(&ep->queue)) { - req = list_entry(ep->queue.next, - struct pxa2xx_request, - queue); - done(ep, req, status); - } - if (ep->desc) - pio_irq_disable (ep->bEndpointAddress); -} - - -/* dequeue JUST ONE request */ -static int pxa2xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) -{ - struct pxa2xx_ep *ep; - struct pxa2xx_request *req; - unsigned long flags; - - ep = container_of(_ep, struct pxa2xx_ep, ep); - if (!_ep || ep->ep.name == ep0name) - return -EINVAL; - - local_irq_save(flags); - - /* make sure it's actually queued on this endpoint */ - list_for_each_entry (req, &ep->queue, queue) { - if (&req->req == _req) - break; - } - if (&req->req != _req) { - local_irq_restore(flags); - return -EINVAL; - } - - done(ep, req, -ECONNRESET); - - local_irq_restore(flags); - return 0; -} - -/*-------------------------------------------------------------------------*/ - -static int pxa2xx_ep_set_halt(struct usb_ep *_ep, int value) -{ - struct pxa2xx_ep *ep; - unsigned long flags; - - ep = container_of(_ep, struct pxa2xx_ep, ep); - if (unlikely (!_ep - || (!ep->desc && ep->ep.name != ep0name)) - || ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) { - DMSG("%s, bad ep\n", __func__); - return -EINVAL; - } - if (value == 0) { - /* this path (reset toggle+halt) is needed to implement - * SET_INTERFACE on normal hardware. but it can't be - * done from software on the PXA UDC, and the hardware - * forgets to do it as part of SET_INTERFACE automagic. - */ - DMSG("only host can clear %s halt\n", _ep->name); - return -EROFS; - } - - local_irq_save(flags); - - if ((ep->bEndpointAddress & USB_DIR_IN) != 0 - && ((*ep->reg_udccs & UDCCS_BI_TFS) == 0 - || !list_empty(&ep->queue))) { - local_irq_restore(flags); - return -EAGAIN; - } - - /* FST bit is the same for control, bulk in, bulk out, interrupt in */ - *ep->reg_udccs = UDCCS_BI_FST|UDCCS_BI_FTF; - - /* ep0 needs special care */ - if (!ep->desc) { - start_watchdog(ep->dev); - ep->dev->req_pending = 0; - ep->dev->ep0state = EP0_STALL; - - /* and bulk/intr endpoints like dropping stalls too */ - } else { - unsigned i; - for (i = 0; i < 1000; i += 20) { - if (*ep->reg_udccs & UDCCS_BI_SST) - break; - udelay(20); - } - } - local_irq_restore(flags); - - DBG(DBG_VERBOSE, "%s halt\n", _ep->name); - return 0; -} - -static int pxa2xx_ep_fifo_status(struct usb_ep *_ep) -{ - struct pxa2xx_ep *ep; - - ep = container_of(_ep, struct pxa2xx_ep, ep); - if (!_ep) { - DMSG("%s, bad ep\n", __func__); - return -ENODEV; - } - /* pxa can't report unclaimed bytes from IN fifos */ - if ((ep->bEndpointAddress & USB_DIR_IN) != 0) - return -EOPNOTSUPP; - if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN - || (*ep->reg_udccs & UDCCS_BO_RFS) == 0) - return 0; - else - return (*ep->reg_ubcr & 0xfff) + 1; -} - -static void pxa2xx_ep_fifo_flush(struct usb_ep *_ep) -{ - struct pxa2xx_ep *ep; - - ep = container_of(_ep, struct pxa2xx_ep, ep); - if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) { - DMSG("%s, bad ep\n", __func__); - return; - } - - /* toggle and halt bits stay unchanged */ - - /* for OUT, just read and discard the FIFO contents. */ - if ((ep->bEndpointAddress & USB_DIR_IN) == 0) { - while (((*ep->reg_udccs) & UDCCS_BO_RNE) != 0) - (void) *ep->reg_uddr; - return; - } - - /* most IN status is the same, but ISO can't stall */ - *ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR - | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) - ? 0 : UDCCS_BI_SST; -} - - -static struct usb_ep_ops pxa2xx_ep_ops = { - .enable = pxa2xx_ep_enable, - .disable = pxa2xx_ep_disable, - - .alloc_request = pxa2xx_ep_alloc_request, - .free_request = pxa2xx_ep_free_request, - - .queue = pxa2xx_ep_queue, - .dequeue = pxa2xx_ep_dequeue, - - .set_halt = pxa2xx_ep_set_halt, - .fifo_status = pxa2xx_ep_fifo_status, - .fifo_flush = pxa2xx_ep_fifo_flush, -}; - - -/* --------------------------------------------------------------------------- - * device-scoped parts of the api to the usb controller hardware - * --------------------------------------------------------------------------- - */ - -static int pxa2xx_udc_get_frame(struct usb_gadget *_gadget) -{ - return ((UFNRH & 0x07) << 8) | (UFNRL & 0xff); -} - -static int pxa2xx_udc_wakeup(struct usb_gadget *_gadget) -{ - /* host may not have enabled remote wakeup */ - if ((UDCCS0 & UDCCS0_DRWF) == 0) - return -EHOSTUNREACH; - udc_set_mask_UDCCR(UDCCR_RSM); - return 0; -} - -static void stop_activity(struct pxa2xx_udc *, struct usb_gadget_driver *); -static void udc_enable (struct pxa2xx_udc *); -static void udc_disable(struct pxa2xx_udc *); - -/* We disable the UDC -- and its 48 MHz clock -- whenever it's not - * in active use. - */ -static int pullup(struct pxa2xx_udc *udc) -{ - int is_active = udc->vbus && udc->pullup && !udc->suspended; - DMSG("%s\n", is_active ? "active" : "inactive"); - if (is_active) { - if (!udc->active) { - udc->active = 1; - /* Enable clock for USB device */ - clk_enable(udc->clk); - udc_enable(udc); - } - } else { - if (udc->active) { - if (udc->gadget.speed != USB_SPEED_UNKNOWN) { - DMSG("disconnect %s\n", udc->driver - ? udc->driver->driver.name - : "(no driver)"); - stop_activity(udc, udc->driver); - } - udc_disable(udc); - /* Disable clock for USB device */ - clk_disable(udc->clk); - udc->active = 0; - } - - } - return 0; -} - -/* VBUS reporting logically comes from a transceiver */ -static int pxa2xx_udc_vbus_session(struct usb_gadget *_gadget, int is_active) -{ - struct pxa2xx_udc *udc; - - udc = container_of(_gadget, struct pxa2xx_udc, gadget); - udc->vbus = (is_active != 0); - DMSG("vbus %s\n", is_active ? "supplied" : "inactive"); - pullup(udc); - return 0; -} - -/* drivers may have software control over D+ pullup */ -static int pxa2xx_udc_pullup(struct usb_gadget *_gadget, int is_active) -{ - struct pxa2xx_udc *udc; - - udc = container_of(_gadget, struct pxa2xx_udc, gadget); - - /* not all boards support pullup control */ - if (!udc->mach->gpio_pullup && !udc->mach->udc_command) - return -EOPNOTSUPP; - - udc->pullup = (is_active != 0); - pullup(udc); - return 0; -} - -static const struct usb_gadget_ops pxa2xx_udc_ops = { - .get_frame = pxa2xx_udc_get_frame, - .wakeup = pxa2xx_udc_wakeup, - .vbus_session = pxa2xx_udc_vbus_session, - .pullup = pxa2xx_udc_pullup, - - // .vbus_draw ... boards may consume current from VBUS, up to - // 100-500mA based on config. the 500uA suspend ceiling means - // that exclusively vbus-powered PXA designs violate USB specs. -}; - -/*-------------------------------------------------------------------------*/ - -#ifdef CONFIG_USB_GADGET_DEBUG_FS - -static int -udc_seq_show(struct seq_file *m, void *_d) -{ - struct pxa2xx_udc *dev = m->private; - unsigned long flags; - int i; - u32 tmp; - - local_irq_save(flags); - - /* basic device status */ - seq_printf(m, DRIVER_DESC "\n" - "%s version: %s\nGadget driver: %s\nHost %s\n\n", - driver_name, DRIVER_VERSION SIZE_STR "(pio)", - dev->driver ? dev->driver->driver.name : "(none)", - is_vbus_present() ? "full speed" : "disconnected"); - - /* registers for device and ep0 */ - seq_printf(m, - "uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n", - UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL); - - tmp = UDCCR; - seq_printf(m, - "udccr %02X =%s%s%s%s%s%s%s%s\n", tmp, - (tmp & UDCCR_REM) ? " rem" : "", - (tmp & UDCCR_RSTIR) ? " rstir" : "", - (tmp & UDCCR_SRM) ? " srm" : "", - (tmp & UDCCR_SUSIR) ? " susir" : "", - (tmp & UDCCR_RESIR) ? " resir" : "", - (tmp & UDCCR_RSM) ? " rsm" : "", - (tmp & UDCCR_UDA) ? " uda" : "", - (tmp & UDCCR_UDE) ? " ude" : ""); - - tmp = UDCCS0; - seq_printf(m, - "udccs0 %02X =%s%s%s%s%s%s%s%s\n", tmp, - (tmp & UDCCS0_SA) ? " sa" : "", - (tmp & UDCCS0_RNE) ? " rne" : "", - (tmp & UDCCS0_FST) ? " fst" : "", - (tmp & UDCCS0_SST) ? " sst" : "", - (tmp & UDCCS0_DRWF) ? " dwrf" : "", - (tmp & UDCCS0_FTF) ? " ftf" : "", - (tmp & UDCCS0_IPR) ? " ipr" : "", - (tmp & UDCCS0_OPR) ? " opr" : ""); - - if (dev->has_cfr) { - tmp = UDCCFR; - seq_printf(m, - "udccfr %02X =%s%s\n", tmp, - (tmp & UDCCFR_AREN) ? " aren" : "", - (tmp & UDCCFR_ACM) ? " acm" : ""); - } - - if (!is_vbus_present() || !dev->driver) - goto done; - - seq_printf(m, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n", - dev->stats.write.bytes, dev->stats.write.ops, - dev->stats.read.bytes, dev->stats.read.ops, - dev->stats.irqs); - - /* dump endpoint queues */ - for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) { - struct pxa2xx_ep *ep = &dev->ep [i]; - struct pxa2xx_request *req; - - if (i != 0) { - const struct usb_endpoint_descriptor *desc; - - desc = ep->desc; - if (!desc) - continue; - tmp = *dev->ep [i].reg_udccs; - seq_printf(m, - "%s max %d %s udccs %02x irqs %lu\n", - ep->ep.name, le16_to_cpu(desc->wMaxPacketSize), - "pio", tmp, ep->pio_irqs); - /* TODO translate all five groups of udccs bits! */ - - } else /* ep0 should only have one transfer queued */ - seq_printf(m, "ep0 max 16 pio irqs %lu\n", - ep->pio_irqs); - - if (list_empty(&ep->queue)) { - seq_printf(m, "\t(nothing queued)\n"); - continue; - } - list_for_each_entry(req, &ep->queue, queue) { - seq_printf(m, - "\treq %p len %d/%d buf %p\n", - &req->req, req->req.actual, - req->req.length, req->req.buf); - } - } - -done: - local_irq_restore(flags); - return 0; -} - -static int -udc_debugfs_open(struct inode *inode, struct file *file) -{ - return single_open(file, udc_seq_show, inode->i_private); -} - -static const struct file_operations debug_fops = { - .open = udc_debugfs_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -#define create_debug_files(dev) \ - do { \ - dev->debugfs_udc = debugfs_create_file(dev->gadget.name, \ - S_IRUGO, NULL, dev, &debug_fops); \ - } while (0) -#define remove_debug_files(dev) \ - do { \ - if (dev->debugfs_udc) \ - debugfs_remove(dev->debugfs_udc); \ - } while (0) - -#else /* !CONFIG_USB_GADGET_DEBUG_FILES */ - -#define create_debug_files(dev) do {} while (0) -#define remove_debug_files(dev) do {} while (0) - -#endif /* CONFIG_USB_GADGET_DEBUG_FILES */ - -/*-------------------------------------------------------------------------*/ - -/* - * udc_disable - disable USB device controller - */ -static void udc_disable(struct pxa2xx_udc *dev) -{ - /* block all irqs */ - udc_set_mask_UDCCR(UDCCR_SRM|UDCCR_REM); - UICR0 = UICR1 = 0xff; - UFNRH = UFNRH_SIM; - - /* if hardware supports it, disconnect from usb */ - pullup_off(); - - udc_clear_mask_UDCCR(UDCCR_UDE); - - ep0_idle (dev); - dev->gadget.speed = USB_SPEED_UNKNOWN; -} - - -/* - * udc_reinit - initialize software state - */ -static void udc_reinit(struct pxa2xx_udc *dev) -{ - u32 i; - - /* device/ep0 records init */ - INIT_LIST_HEAD (&dev->gadget.ep_list); - INIT_LIST_HEAD (&dev->gadget.ep0->ep_list); - dev->ep0state = EP0_IDLE; - - /* basic endpoint records init */ - for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) { - struct pxa2xx_ep *ep = &dev->ep[i]; - - if (i != 0) - list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list); - - ep->desc = NULL; - ep->stopped = 0; - INIT_LIST_HEAD (&ep->queue); - ep->pio_irqs = 0; - } - - /* the rest was statically initialized, and is read-only */ -} - -/* until it's enabled, this UDC should be completely invisible - * to any USB host. - */ -static void udc_enable (struct pxa2xx_udc *dev) -{ - udc_clear_mask_UDCCR(UDCCR_UDE); - - /* try to clear these bits before we enable the udc */ - udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR); - - ep0_idle(dev); - dev->gadget.speed = USB_SPEED_UNKNOWN; - dev->stats.irqs = 0; - - /* - * sequence taken from chapter 12.5.10, PXA250 AppProcDevManual: - * - enable UDC - * - if RESET is already in progress, ack interrupt - * - unmask reset interrupt - */ - udc_set_mask_UDCCR(UDCCR_UDE); - if (!(UDCCR & UDCCR_UDA)) - udc_ack_int_UDCCR(UDCCR_RSTIR); - - if (dev->has_cfr /* UDC_RES2 is defined */) { - /* pxa255 (a0+) can avoid a set_config race that could - * prevent gadget drivers from configuring correctly - */ - UDCCFR = UDCCFR_ACM | UDCCFR_MB1; - } else { - /* "USB test mode" for pxa250 errata 40-42 (stepping a0, a1) - * which could result in missing packets and interrupts. - * supposedly one bit per endpoint, controlling whether it - * double buffers or not; ACM/AREN bits fit into the holes. - * zero bits (like USIR0_IRx) disable double buffering. - */ - UDC_RES1 = 0x00; - UDC_RES2 = 0x00; - } - - /* enable suspend/resume and reset irqs */ - udc_clear_mask_UDCCR(UDCCR_SRM | UDCCR_REM); - - /* enable ep0 irqs */ - UICR0 &= ~UICR0_IM0; - - /* if hardware supports it, pullup D+ and wait for reset */ - pullup_on(); -} - - -/* when a driver is successfully registered, it will receive - * control requests including set_configuration(), which enables - * non-control requests. then usb traffic follows until a - * disconnect is reported. then a host may connect again, or - * the driver might get unbound. - */ -int usb_gadget_register_driver(struct usb_gadget_driver *driver) -{ - struct pxa2xx_udc *dev = the_controller; - int retval; - - if (!driver - || driver->speed < USB_SPEED_FULL - || !driver->bind - || !driver->disconnect - || !driver->setup) - return -EINVAL; - if (!dev) - return -ENODEV; - if (dev->driver) - return -EBUSY; - - /* first hook up the driver ... */ - dev->driver = driver; - dev->gadget.dev.driver = &driver->driver; - dev->pullup = 1; - - retval = device_add (&dev->gadget.dev); - if (retval) { -fail: - dev->driver = NULL; - dev->gadget.dev.driver = NULL; - return retval; - } - retval = driver->bind(&dev->gadget); - if (retval) { - DMSG("bind to driver %s --> error %d\n", - driver->driver.name, retval); - device_del (&dev->gadget.dev); - goto fail; - } - - /* ... then enable host detection and ep0; and we're ready - * for set_configuration as well as eventual disconnect. - */ - DMSG("registered gadget driver '%s'\n", driver->driver.name); - pullup(dev); - dump_state(dev); - return 0; -} -EXPORT_SYMBOL(usb_gadget_register_driver); - -static void -stop_activity(struct pxa2xx_udc *dev, struct usb_gadget_driver *driver) -{ - int i; - - /* don't disconnect drivers more than once */ - if (dev->gadget.speed == USB_SPEED_UNKNOWN) - driver = NULL; - dev->gadget.speed = USB_SPEED_UNKNOWN; - - /* prevent new request submissions, kill any outstanding requests */ - for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) { - struct pxa2xx_ep *ep = &dev->ep[i]; - - ep->stopped = 1; - nuke(ep, -ESHUTDOWN); - } - del_timer_sync(&dev->timer); - - /* report disconnect; the driver is already quiesced */ - if (driver) - driver->disconnect(&dev->gadget); - - /* re-init driver-visible data structures */ - udc_reinit(dev); -} - -int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) -{ - struct pxa2xx_udc *dev = the_controller; - - if (!dev) - return -ENODEV; - if (!driver || driver != dev->driver || !driver->unbind) - return -EINVAL; - - local_irq_disable(); - dev->pullup = 0; - pullup(dev); - stop_activity(dev, driver); - local_irq_enable(); - - driver->unbind(&dev->gadget); - dev->gadget.dev.driver = NULL; - dev->driver = NULL; - - device_del (&dev->gadget.dev); - - DMSG("unregistered gadget driver '%s'\n", driver->driver.name); - dump_state(dev); - return 0; -} -EXPORT_SYMBOL(usb_gadget_unregister_driver); - - -/*-------------------------------------------------------------------------*/ - -#ifdef CONFIG_ARCH_LUBBOCK - -/* Lubbock has separate connect and disconnect irqs. More typical designs - * use one GPIO as the VBUS IRQ, and another to control the D+ pullup. - */ - -static irqreturn_t -lubbock_vbus_irq(int irq, void *_dev) -{ - struct pxa2xx_udc *dev = _dev; - int vbus; - - dev->stats.irqs++; - switch (irq) { - case LUBBOCK_USB_IRQ: - vbus = 1; - disable_irq(LUBBOCK_USB_IRQ); - enable_irq(LUBBOCK_USB_DISC_IRQ); - break; - case LUBBOCK_USB_DISC_IRQ: - vbus = 0; - disable_irq(LUBBOCK_USB_DISC_IRQ); - enable_irq(LUBBOCK_USB_IRQ); - break; - default: - return IRQ_NONE; - } - - pxa2xx_udc_vbus_session(&dev->gadget, vbus); - return IRQ_HANDLED; -} - -#endif - -static irqreturn_t udc_vbus_irq(int irq, void *_dev) -{ - struct pxa2xx_udc *dev = _dev; - int vbus = gpio_get_value(dev->mach->gpio_vbus); - - if (dev->mach->gpio_vbus_inverted) - vbus = !vbus; - - pxa2xx_udc_vbus_session(&dev->gadget, vbus); - return IRQ_HANDLED; -} - - -/*-------------------------------------------------------------------------*/ - -static inline void clear_ep_state (struct pxa2xx_udc *dev) -{ - unsigned i; - - /* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint - * fifos, and pending transactions mustn't be continued in any case. - */ - for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) - nuke(&dev->ep[i], -ECONNABORTED); -} - -static void udc_watchdog(unsigned long _dev) -{ - struct pxa2xx_udc *dev = (void *)_dev; - - local_irq_disable(); - if (dev->ep0state == EP0_STALL - && (UDCCS0 & UDCCS0_FST) == 0 - && (UDCCS0 & UDCCS0_SST) == 0) { - UDCCS0 = UDCCS0_FST|UDCCS0_FTF; - DBG(DBG_VERBOSE, "ep0 re-stall\n"); - start_watchdog(dev); - } - local_irq_enable(); -} - -static void handle_ep0 (struct pxa2xx_udc *dev) -{ - u32 udccs0 = UDCCS0; - struct pxa2xx_ep *ep = &dev->ep [0]; - struct pxa2xx_request *req; - union { - struct usb_ctrlrequest r; - u8 raw [8]; - u32 word [2]; - } u; - - if (list_empty(&ep->queue)) - req = NULL; - else - req = list_entry(ep->queue.next, struct pxa2xx_request, queue); - - /* clear stall status */ - if (udccs0 & UDCCS0_SST) { - nuke(ep, -EPIPE); - UDCCS0 = UDCCS0_SST; - del_timer(&dev->timer); - ep0_idle(dev); - } - - /* previous request unfinished? non-error iff back-to-back ... */ - if ((udccs0 & UDCCS0_SA) != 0 && dev->ep0state != EP0_IDLE) { - nuke(ep, 0); - del_timer(&dev->timer); - ep0_idle(dev); - } - - switch (dev->ep0state) { - case EP0_IDLE: - /* late-breaking status? */ - udccs0 = UDCCS0; - - /* start control request? */ - if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE)) - == (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))) { - int i; - - nuke (ep, -EPROTO); - - /* read SETUP packet */ - for (i = 0; i < 8; i++) { - if (unlikely(!(UDCCS0 & UDCCS0_RNE))) { -bad_setup: - DMSG("SETUP %d!\n", i); - goto stall; - } - u.raw [i] = (u8) UDDR0; - } - if (unlikely((UDCCS0 & UDCCS0_RNE) != 0)) - goto bad_setup; - -got_setup: - DBG(DBG_VERBOSE, "SETUP %02x.%02x v%04x i%04x l%04x\n", - u.r.bRequestType, u.r.bRequest, - le16_to_cpu(u.r.wValue), - le16_to_cpu(u.r.wIndex), - le16_to_cpu(u.r.wLength)); - - /* cope with automagic for some standard requests. */ - dev->req_std = (u.r.bRequestType & USB_TYPE_MASK) - == USB_TYPE_STANDARD; - dev->req_config = 0; - dev->req_pending = 1; - switch (u.r.bRequest) { - /* hardware restricts gadget drivers here! */ - case USB_REQ_SET_CONFIGURATION: - if (u.r.bRequestType == USB_RECIP_DEVICE) { - /* reflect hardware's automagic - * up to the gadget driver. - */ -config_change: - dev->req_config = 1; - clear_ep_state(dev); - /* if !has_cfr, there's no synch - * else use AREN (later) not SA|OPR - * USIR0_IR0 acts edge sensitive - */ - } - break; - /* ... and here, even more ... */ - case USB_REQ_SET_INTERFACE: - if (u.r.bRequestType == USB_RECIP_INTERFACE) { - /* udc hardware is broken by design: - * - altsetting may only be zero; - * - hw resets all interfaces' eps; - * - ep reset doesn't include halt(?). - */ - DMSG("broken set_interface (%d/%d)\n", - le16_to_cpu(u.r.wIndex), - le16_to_cpu(u.r.wValue)); - goto config_change; - } - break; - /* hardware was supposed to hide this */ - case USB_REQ_SET_ADDRESS: - if (u.r.bRequestType == USB_RECIP_DEVICE) { - ep0start(dev, 0, "address"); - return; - } - break; - } - - if (u.r.bRequestType & USB_DIR_IN) - dev->ep0state = EP0_IN_DATA_PHASE; - else - dev->ep0state = EP0_OUT_DATA_PHASE; - - i = dev->driver->setup(&dev->gadget, &u.r); - if (i < 0) { - /* hardware automagic preventing STALL... */ - if (dev->req_config) { - /* hardware sometimes neglects to tell - * tell us about config change events, - * so later ones may fail... - */ - WARN("config change %02x fail %d?\n", - u.r.bRequest, i); - return; - /* TODO experiment: if has_cfr, - * hardware didn't ACK; maybe we - * could actually STALL! - */ - } - DBG(DBG_VERBOSE, "protocol STALL, " - "%02x err %d\n", UDCCS0, i); -stall: - /* the watchdog timer helps deal with cases - * where udc seems to clear FST wrongly, and - * then NAKs instead of STALLing. - */ - ep0start(dev, UDCCS0_FST|UDCCS0_FTF, "stall"); - start_watchdog(dev); - dev->ep0state = EP0_STALL; - - /* deferred i/o == no response yet */ - } else if (dev->req_pending) { - if (likely(dev->ep0state == EP0_IN_DATA_PHASE - || dev->req_std || u.r.wLength)) - ep0start(dev, 0, "defer"); - else - ep0start(dev, UDCCS0_IPR, "defer/IPR"); - } - - /* expect at least one data or status stage irq */ - return; - - } else if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA)) - == (UDCCS0_OPR|UDCCS0_SA))) { - unsigned i; - - /* pxa210/250 erratum 131 for B0/B1 says RNE lies. - * still observed on a pxa255 a0. - */ - DBG(DBG_VERBOSE, "e131\n"); - nuke(ep, -EPROTO); - - /* read SETUP data, but don't trust it too much */ - for (i = 0; i < 8; i++) - u.raw [i] = (u8) UDDR0; - if ((u.r.bRequestType & USB_RECIP_MASK) - > USB_RECIP_OTHER) - goto stall; - if (u.word [0] == 0 && u.word [1] == 0) - goto stall; - goto got_setup; - } else { - /* some random early IRQ: - * - we acked FST - * - IPR cleared - * - OPR got set, without SA (likely status stage) - */ - UDCCS0 = udccs0 & (UDCCS0_SA|UDCCS0_OPR); - } - break; - case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */ - if (udccs0 & UDCCS0_OPR) { - UDCCS0 = UDCCS0_OPR|UDCCS0_FTF; - DBG(DBG_VERBOSE, "ep0in premature status\n"); - if (req) - done(ep, req, 0); - ep0_idle(dev); - } else /* irq was IPR clearing */ { - if (req) { - /* this IN packet might finish the request */ - (void) write_ep0_fifo(ep, req); - } /* else IN token before response was written */ - } - break; - case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */ - if (udccs0 & UDCCS0_OPR) { - if (req) { - /* this OUT packet might finish the request */ - if (read_ep0_fifo(ep, req)) - done(ep, req, 0); - /* else more OUT packets expected */ - } /* else OUT token before read was issued */ - } else /* irq was IPR clearing */ { - DBG(DBG_VERBOSE, "ep0out premature status\n"); - if (req) - done(ep, req, 0); - ep0_idle(dev); - } - break; - case EP0_END_XFER: - if (req) - done(ep, req, 0); - /* ack control-IN status (maybe in-zlp was skipped) - * also appears after some config change events. - */ - if (udccs0 & UDCCS0_OPR) - UDCCS0 = UDCCS0_OPR; - ep0_idle(dev); - break; - case EP0_STALL: - UDCCS0 = UDCCS0_FST; - break; - } - USIR0 = USIR0_IR0; -} - -static void handle_ep(struct pxa2xx_ep *ep) -{ - struct pxa2xx_request *req; - int is_in = ep->bEndpointAddress & USB_DIR_IN; - int completed; - u32 udccs, tmp; - - do { - completed = 0; - if (likely (!list_empty(&ep->queue))) - req = list_entry(ep->queue.next, - struct pxa2xx_request, queue); - else - req = NULL; - - // TODO check FST handling - - udccs = *ep->reg_udccs; - if (unlikely(is_in)) { /* irq from TPC, SST, or (ISO) TUR */ - tmp = UDCCS_BI_TUR; - if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK)) - tmp |= UDCCS_BI_SST; - tmp &= udccs; - if (likely (tmp)) - *ep->reg_udccs = tmp; - if (req && likely ((udccs & UDCCS_BI_TFS) != 0)) - completed = write_fifo(ep, req); - - } else { /* irq from RPC (or for ISO, ROF) */ - if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK)) - tmp = UDCCS_BO_SST | UDCCS_BO_DME; - else - tmp = UDCCS_IO_ROF | UDCCS_IO_DME; - tmp &= udccs; - if (likely(tmp)) - *ep->reg_udccs = tmp; - - /* fifos can hold packets, ready for reading... */ - if (likely(req)) { - completed = read_fifo(ep, req); - } else - pio_irq_disable (ep->bEndpointAddress); - } - ep->pio_irqs++; - } while (completed); -} - -/* - * pxa2xx_udc_irq - interrupt handler - * - * avoid delays in ep0 processing. the control handshaking isn't always - * under software control (pxa250c0 and the pxa255 are better), and delays - * could cause usb protocol errors. - */ -static irqreturn_t -pxa2xx_udc_irq(int irq, void *_dev) -{ - struct pxa2xx_udc *dev = _dev; - int handled; - - dev->stats.irqs++; - do { - u32 udccr = UDCCR; - - handled = 0; - - /* SUSpend Interrupt Request */ - if (unlikely(udccr & UDCCR_SUSIR)) { - udc_ack_int_UDCCR(UDCCR_SUSIR); - handled = 1; - DBG(DBG_VERBOSE, "USB suspend%s\n", is_vbus_present() - ? "" : "+disconnect"); - - if (!is_vbus_present()) - stop_activity(dev, dev->driver); - else if (dev->gadget.speed != USB_SPEED_UNKNOWN - && dev->driver - && dev->driver->suspend) - dev->driver->suspend(&dev->gadget); - ep0_idle (dev); - } - - /* RESume Interrupt Request */ - if (unlikely(udccr & UDCCR_RESIR)) { - udc_ack_int_UDCCR(UDCCR_RESIR); - handled = 1; - DBG(DBG_VERBOSE, "USB resume\n"); - - if (dev->gadget.speed != USB_SPEED_UNKNOWN - && dev->driver - && dev->driver->resume - && is_vbus_present()) - dev->driver->resume(&dev->gadget); - } - - /* ReSeT Interrupt Request - USB reset */ - if (unlikely(udccr & UDCCR_RSTIR)) { - udc_ack_int_UDCCR(UDCCR_RSTIR); - handled = 1; - - if ((UDCCR & UDCCR_UDA) == 0) { - DBG(DBG_VERBOSE, "USB reset start\n"); - - /* reset driver and endpoints, - * in case that's not yet done - */ - stop_activity (dev, dev->driver); - - } else { - DBG(DBG_VERBOSE, "USB reset end\n"); - dev->gadget.speed = USB_SPEED_FULL; - memset(&dev->stats, 0, sizeof dev->stats); - /* driver and endpoints are still reset */ - } - - } else { - u32 usir0 = USIR0 & ~UICR0; - u32 usir1 = USIR1 & ~UICR1; - int i; - - if (unlikely (!usir0 && !usir1)) - continue; - - DBG(DBG_VERY_NOISY, "irq %02x.%02x\n", usir1, usir0); - - /* control traffic */ - if (usir0 & USIR0_IR0) { - dev->ep[0].pio_irqs++; - handle_ep0(dev); - handled = 1; - } - - /* endpoint data transfers */ - for (i = 0; i < 8; i++) { - u32 tmp = 1 << i; - - if (i && (usir0 & tmp)) { - handle_ep(&dev->ep[i]); - USIR0 |= tmp; - handled = 1; - } - if (usir1 & tmp) { - handle_ep(&dev->ep[i+8]); - USIR1 |= tmp; - handled = 1; - } - } - } - - /* we could also ask for 1 msec SOF (SIR) interrupts */ - - } while (handled); - return IRQ_HANDLED; -} - -/*-------------------------------------------------------------------------*/ - -static void nop_release (struct device *dev) -{ - DMSG("%s %s\n", __func__, dev->bus_id); -} - -/* this uses load-time allocation and initialization (instead of - * doing it at run-time) to save code, eliminate fault paths, and - * be more obviously correct. - */ -static struct pxa2xx_udc memory = { - .gadget = { - .ops = &pxa2xx_udc_ops, - .ep0 = &memory.ep[0].ep, - .name = driver_name, - .dev = { - .bus_id = "gadget", - .release = nop_release, - }, - }, - - /* control endpoint */ - .ep[0] = { - .ep = { - .name = ep0name, - .ops = &pxa2xx_ep_ops, - .maxpacket = EP0_FIFO_SIZE, - }, - .dev = &memory, - .reg_udccs = &UDCCS0, - .reg_uddr = &UDDR0, - }, - - /* first group of endpoints */ - .ep[1] = { - .ep = { - .name = "ep1in-bulk", - .ops = &pxa2xx_ep_ops, - .maxpacket = BULK_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = BULK_FIFO_SIZE, - .bEndpointAddress = USB_DIR_IN | 1, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .reg_udccs = &UDCCS1, - .reg_uddr = &UDDR1, - }, - .ep[2] = { - .ep = { - .name = "ep2out-bulk", - .ops = &pxa2xx_ep_ops, - .maxpacket = BULK_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = BULK_FIFO_SIZE, - .bEndpointAddress = 2, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .reg_udccs = &UDCCS2, - .reg_ubcr = &UBCR2, - .reg_uddr = &UDDR2, - }, -#ifndef CONFIG_USB_PXA2XX_SMALL - .ep[3] = { - .ep = { - .name = "ep3in-iso", - .ops = &pxa2xx_ep_ops, - .maxpacket = ISO_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = ISO_FIFO_SIZE, - .bEndpointAddress = USB_DIR_IN | 3, - .bmAttributes = USB_ENDPOINT_XFER_ISOC, - .reg_udccs = &UDCCS3, - .reg_uddr = &UDDR3, - }, - .ep[4] = { - .ep = { - .name = "ep4out-iso", - .ops = &pxa2xx_ep_ops, - .maxpacket = ISO_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = ISO_FIFO_SIZE, - .bEndpointAddress = 4, - .bmAttributes = USB_ENDPOINT_XFER_ISOC, - .reg_udccs = &UDCCS4, - .reg_ubcr = &UBCR4, - .reg_uddr = &UDDR4, - }, - .ep[5] = { - .ep = { - .name = "ep5in-int", - .ops = &pxa2xx_ep_ops, - .maxpacket = INT_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = INT_FIFO_SIZE, - .bEndpointAddress = USB_DIR_IN | 5, - .bmAttributes = USB_ENDPOINT_XFER_INT, - .reg_udccs = &UDCCS5, - .reg_uddr = &UDDR5, - }, - - /* second group of endpoints */ - .ep[6] = { - .ep = { - .name = "ep6in-bulk", - .ops = &pxa2xx_ep_ops, - .maxpacket = BULK_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = BULK_FIFO_SIZE, - .bEndpointAddress = USB_DIR_IN | 6, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .reg_udccs = &UDCCS6, - .reg_uddr = &UDDR6, - }, - .ep[7] = { - .ep = { - .name = "ep7out-bulk", - .ops = &pxa2xx_ep_ops, - .maxpacket = BULK_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = BULK_FIFO_SIZE, - .bEndpointAddress = 7, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .reg_udccs = &UDCCS7, - .reg_ubcr = &UBCR7, - .reg_uddr = &UDDR7, - }, - .ep[8] = { - .ep = { - .name = "ep8in-iso", - .ops = &pxa2xx_ep_ops, - .maxpacket = ISO_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = ISO_FIFO_SIZE, - .bEndpointAddress = USB_DIR_IN | 8, - .bmAttributes = USB_ENDPOINT_XFER_ISOC, - .reg_udccs = &UDCCS8, - .reg_uddr = &UDDR8, - }, - .ep[9] = { - .ep = { - .name = "ep9out-iso", - .ops = &pxa2xx_ep_ops, - .maxpacket = ISO_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = ISO_FIFO_SIZE, - .bEndpointAddress = 9, - .bmAttributes = USB_ENDPOINT_XFER_ISOC, - .reg_udccs = &UDCCS9, - .reg_ubcr = &UBCR9, - .reg_uddr = &UDDR9, - }, - .ep[10] = { - .ep = { - .name = "ep10in-int", - .ops = &pxa2xx_ep_ops, - .maxpacket = INT_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = INT_FIFO_SIZE, - .bEndpointAddress = USB_DIR_IN | 10, - .bmAttributes = USB_ENDPOINT_XFER_INT, - .reg_udccs = &UDCCS10, - .reg_uddr = &UDDR10, - }, - - /* third group of endpoints */ - .ep[11] = { - .ep = { - .name = "ep11in-bulk", - .ops = &pxa2xx_ep_ops, - .maxpacket = BULK_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = BULK_FIFO_SIZE, - .bEndpointAddress = USB_DIR_IN | 11, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .reg_udccs = &UDCCS11, - .reg_uddr = &UDDR11, - }, - .ep[12] = { - .ep = { - .name = "ep12out-bulk", - .ops = &pxa2xx_ep_ops, - .maxpacket = BULK_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = BULK_FIFO_SIZE, - .bEndpointAddress = 12, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .reg_udccs = &UDCCS12, - .reg_ubcr = &UBCR12, - .reg_uddr = &UDDR12, - }, - .ep[13] = { - .ep = { - .name = "ep13in-iso", - .ops = &pxa2xx_ep_ops, - .maxpacket = ISO_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = ISO_FIFO_SIZE, - .bEndpointAddress = USB_DIR_IN | 13, - .bmAttributes = USB_ENDPOINT_XFER_ISOC, - .reg_udccs = &UDCCS13, - .reg_uddr = &UDDR13, - }, - .ep[14] = { - .ep = { - .name = "ep14out-iso", - .ops = &pxa2xx_ep_ops, - .maxpacket = ISO_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = ISO_FIFO_SIZE, - .bEndpointAddress = 14, - .bmAttributes = USB_ENDPOINT_XFER_ISOC, - .reg_udccs = &UDCCS14, - .reg_ubcr = &UBCR14, - .reg_uddr = &UDDR14, - }, - .ep[15] = { - .ep = { - .name = "ep15in-int", - .ops = &pxa2xx_ep_ops, - .maxpacket = INT_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = INT_FIFO_SIZE, - .bEndpointAddress = USB_DIR_IN | 15, - .bmAttributes = USB_ENDPOINT_XFER_INT, - .reg_udccs = &UDCCS15, - .reg_uddr = &UDDR15, - }, -#endif /* !CONFIG_USB_PXA2XX_SMALL */ -}; - -#define CP15R0_VENDOR_MASK 0xffffe000 - -#if defined(CONFIG_ARCH_PXA) -#define CP15R0_XSCALE_VALUE 0x69052000 /* intel/arm/xscale */ - -#elif defined(CONFIG_ARCH_IXP4XX) -#define CP15R0_XSCALE_VALUE 0x69054000 /* intel/arm/ixp4xx */ - -#endif - -#define CP15R0_PROD_MASK 0x000003f0 -#define PXA25x 0x00000100 /* and PXA26x */ -#define PXA210 0x00000120 - -#define CP15R0_REV_MASK 0x0000000f - -#define CP15R0_PRODREV_MASK (CP15R0_PROD_MASK | CP15R0_REV_MASK) - -#define PXA255_A0 0x00000106 /* or PXA260_B1 */ -#define PXA250_C0 0x00000105 /* or PXA26x_B0 */ -#define PXA250_B2 0x00000104 -#define PXA250_B1 0x00000103 /* or PXA260_A0 */ -#define PXA250_B0 0x00000102 -#define PXA250_A1 0x00000101 -#define PXA250_A0 0x00000100 - -#define PXA210_C0 0x00000125 -#define PXA210_B2 0x00000124 -#define PXA210_B1 0x00000123 -#define PXA210_B0 0x00000122 -#define IXP425_A0 0x000001c1 -#define IXP425_B0 0x000001f1 -#define IXP465_AD 0x00000200 - -/* - * probe - binds to the platform device - */ -static int __init pxa2xx_udc_probe(struct platform_device *pdev) -{ - struct pxa2xx_udc *dev = &memory; - int retval, vbus_irq, irq; - u32 chiprev; - - /* insist on Intel/ARM/XScale */ - asm("mrc%? p15, 0, %0, c0, c0" : "=r" (chiprev)); - if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) { - pr_err("%s: not XScale!\n", driver_name); - return -ENODEV; - } - - /* trigger chiprev-specific logic */ - switch (chiprev & CP15R0_PRODREV_MASK) { -#if defined(CONFIG_ARCH_PXA) - case PXA255_A0: - dev->has_cfr = 1; - break; - case PXA250_A0: - case PXA250_A1: - /* A0/A1 "not released"; ep 13, 15 unusable */ - /* fall through */ - case PXA250_B2: case PXA210_B2: - case PXA250_B1: case PXA210_B1: - case PXA250_B0: case PXA210_B0: - /* OUT-DMA is broken ... */ - /* fall through */ - case PXA250_C0: case PXA210_C0: - break; -#elif defined(CONFIG_ARCH_IXP4XX) - case IXP425_A0: - case IXP425_B0: - case IXP465_AD: - dev->has_cfr = 1; - break; -#endif - default: - pr_err("%s: unrecognized processor: %08x\n", - driver_name, chiprev); - /* iop3xx, ixp4xx, ... */ - return -ENODEV; - } - - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return -ENODEV; - - dev->clk = clk_get(&pdev->dev, "UDCCLK"); - if (IS_ERR(dev->clk)) { - retval = PTR_ERR(dev->clk); - goto err_clk; - } - - pr_debug("%s: IRQ %d%s%s\n", driver_name, irq, - dev->has_cfr ? "" : " (!cfr)", - SIZE_STR "(pio)" - ); - - /* other non-static parts of init */ - dev->dev = &pdev->dev; - dev->mach = pdev->dev.platform_data; - - if (dev->mach->gpio_vbus) { - if ((retval = gpio_request(dev->mach->gpio_vbus, - "pxa2xx_udc GPIO VBUS"))) { - dev_dbg(&pdev->dev, - "can't get vbus gpio %d, err: %d\n", - dev->mach->gpio_vbus, retval); - goto err_gpio_vbus; - } - gpio_direction_input(dev->mach->gpio_vbus); - vbus_irq = gpio_to_irq(dev->mach->gpio_vbus); - } else - vbus_irq = 0; - - if (dev->mach->gpio_pullup) { - if ((retval = gpio_request(dev->mach->gpio_pullup, - "pca2xx_udc GPIO PULLUP"))) { - dev_dbg(&pdev->dev, - "can't get pullup gpio %d, err: %d\n", - dev->mach->gpio_pullup, retval); - goto err_gpio_pullup; - } - gpio_direction_output(dev->mach->gpio_pullup, 0); - } - - init_timer(&dev->timer); - dev->timer.function = udc_watchdog; - dev->timer.data = (unsigned long) dev; - - device_initialize(&dev->gadget.dev); - dev->gadget.dev.parent = &pdev->dev; - dev->gadget.dev.dma_mask = pdev->dev.dma_mask; - - the_controller = dev; - platform_set_drvdata(pdev, dev); - - udc_disable(dev); - udc_reinit(dev); - - dev->vbus = is_vbus_present(); - - /* irq setup after old hardware state is cleaned up */ - retval = request_irq(irq, pxa2xx_udc_irq, - IRQF_DISABLED, driver_name, dev); - if (retval != 0) { - pr_err("%s: can't get irq %d, err %d\n", - driver_name, irq, retval); - goto err_irq1; - } - dev->got_irq = 1; - -#ifdef CONFIG_ARCH_LUBBOCK - if (machine_is_lubbock()) { - retval = request_irq(LUBBOCK_USB_DISC_IRQ, - lubbock_vbus_irq, - IRQF_DISABLED | IRQF_SAMPLE_RANDOM, - driver_name, dev); - if (retval != 0) { - pr_err("%s: can't get irq %i, err %d\n", - driver_name, LUBBOCK_USB_DISC_IRQ, retval); -lubbock_fail0: - goto err_irq_lub; - } - retval = request_irq(LUBBOCK_USB_IRQ, - lubbock_vbus_irq, - IRQF_DISABLED | IRQF_SAMPLE_RANDOM, - driver_name, dev); - if (retval != 0) { - pr_err("%s: can't get irq %i, err %d\n", - driver_name, LUBBOCK_USB_IRQ, retval); - free_irq(LUBBOCK_USB_DISC_IRQ, dev); - goto lubbock_fail0; - } - } else -#endif - if (vbus_irq) { - retval = request_irq(vbus_irq, udc_vbus_irq, - IRQF_DISABLED | IRQF_SAMPLE_RANDOM | - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - driver_name, dev); - if (retval != 0) { - pr_err("%s: can't get irq %i, err %d\n", - driver_name, vbus_irq, retval); - goto err_vbus_irq; - } - } - create_debug_files(dev); - - return 0; - - err_vbus_irq: -#ifdef CONFIG_ARCH_LUBBOCK - free_irq(LUBBOCK_USB_DISC_IRQ, dev); - err_irq_lub: -#endif - free_irq(irq, dev); - err_irq1: - if (dev->mach->gpio_pullup) - gpio_free(dev->mach->gpio_pullup); - err_gpio_pullup: - if (dev->mach->gpio_vbus) - gpio_free(dev->mach->gpio_vbus); - err_gpio_vbus: - clk_put(dev->clk); - err_clk: - return retval; -} - -static void pxa2xx_udc_shutdown(struct platform_device *_dev) -{ - pullup_off(); -} - -static int __exit pxa2xx_udc_remove(struct platform_device *pdev) -{ - struct pxa2xx_udc *dev = platform_get_drvdata(pdev); - - if (dev->driver) - return -EBUSY; - - dev->pullup = 0; - pullup(dev); - - remove_debug_files(dev); - - if (dev->got_irq) { - free_irq(platform_get_irq(pdev, 0), dev); - dev->got_irq = 0; - } -#ifdef CONFIG_ARCH_LUBBOCK - if (machine_is_lubbock()) { - free_irq(LUBBOCK_USB_DISC_IRQ, dev); - free_irq(LUBBOCK_USB_IRQ, dev); - } -#endif - if (dev->mach->gpio_vbus) { - free_irq(gpio_to_irq(dev->mach->gpio_vbus), dev); - gpio_free(dev->mach->gpio_vbus); - } - if (dev->mach->gpio_pullup) - gpio_free(dev->mach->gpio_pullup); - - clk_put(dev->clk); - - platform_set_drvdata(pdev, NULL); - the_controller = NULL; - return 0; -} - -/*-------------------------------------------------------------------------*/ - -#ifdef CONFIG_PM - -/* USB suspend (controlled by the host) and system suspend (controlled - * by the PXA) don't necessarily work well together. If USB is active, - * the 48 MHz clock is required; so the system can't enter 33 MHz idle - * mode, or any deeper PM saving state. - * - * For now, we punt and forcibly disconnect from the USB host when PXA - * enters any suspend state. While we're disconnected, we always disable - * the 48MHz USB clock ... allowing PXA sleep and/or 33 MHz idle states. - * Boards without software pullup control shouldn't use those states. - * VBUS IRQs should probably be ignored so that the PXA device just acts - * "dead" to USB hosts until system resume. - */ -static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state) -{ - struct pxa2xx_udc *udc = platform_get_drvdata(dev); - unsigned long flags; - - if (!udc->mach->gpio_pullup && !udc->mach->udc_command) - WARN("USB host won't detect disconnect!\n"); - udc->suspended = 1; - - local_irq_save(flags); - pullup(udc); - local_irq_restore(flags); - - return 0; -} - -static int pxa2xx_udc_resume(struct platform_device *dev) -{ - struct pxa2xx_udc *udc = platform_get_drvdata(dev); - unsigned long flags; - - udc->suspended = 0; - local_irq_save(flags); - pullup(udc); - local_irq_restore(flags); - - return 0; -} - -#else -#define pxa2xx_udc_suspend NULL -#define pxa2xx_udc_resume NULL -#endif - -/*-------------------------------------------------------------------------*/ - -static struct platform_driver udc_driver = { - .shutdown = pxa2xx_udc_shutdown, - .remove = __exit_p(pxa2xx_udc_remove), - .suspend = pxa2xx_udc_suspend, - .resume = pxa2xx_udc_resume, - .driver = { - .owner = THIS_MODULE, - .name = "pxa2xx-udc", - }, -}; - -static int __init udc_init(void) -{ - pr_info("%s: version %s\n", driver_name, DRIVER_VERSION); - return platform_driver_probe(&udc_driver, pxa2xx_udc_probe); -} -module_init(udc_init); - -static void __exit udc_exit(void) -{ - platform_driver_unregister(&udc_driver); -} -module_exit(udc_exit); - -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:pxa2xx-udc"); diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h deleted file mode 100644 index e2c19e88c875..000000000000 --- a/drivers/usb/gadget/pxa2xx_udc.h +++ /dev/null @@ -1,267 +0,0 @@ -/* - * linux/drivers/usb/gadget/pxa2xx_udc.h - * Intel PXA2xx on-chip full speed USB device controller - * - * Copyright (C) 2003 Robert Schwebel , Pengutronix - * Copyright (C) 2003 David Brownell - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __LINUX_USB_GADGET_PXA2XX_H -#define __LINUX_USB_GADGET_PXA2XX_H - -#include - -/*-------------------------------------------------------------------------*/ - -/* pxa2xx has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */ -#define UFNRH_SIR (1 << 7) /* SOF interrupt request */ -#define UFNRH_SIM (1 << 6) /* SOF interrupt mask */ -#define UFNRH_IPE14 (1 << 5) /* ISO packet error, ep14 */ -#define UFNRH_IPE9 (1 << 4) /* ISO packet error, ep9 */ -#define UFNRH_IPE4 (1 << 3) /* ISO packet error, ep4 */ - -/* pxa255 has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */ -#define UDCCFR UDC_RES2 /* UDC Control Function Register */ -#define UDCCFR_AREN (1 << 7) /* ACK response enable (now) */ -#define UDCCFR_ACM (1 << 2) /* ACK control mode (wait for AREN) */ - -/* latest pxa255 errata define new "must be one" bits in UDCCFR */ -#define UDCCFR_MB1 (0xff & ~(UDCCFR_AREN|UDCCFR_ACM)) - -/*-------------------------------------------------------------------------*/ - -struct pxa2xx_udc; - -struct pxa2xx_ep { - struct usb_ep ep; - struct pxa2xx_udc *dev; - - const struct usb_endpoint_descriptor *desc; - struct list_head queue; - unsigned long pio_irqs; - - unsigned short fifo_size; - u8 bEndpointAddress; - u8 bmAttributes; - - unsigned stopped : 1; - unsigned dma_fixup : 1; - - /* UDCCS = UDC Control/Status for this EP - * UBCR = UDC Byte Count Remaining (contents of OUT fifo) - * UDDR = UDC Endpoint Data Register (the fifo) - * DRCM = DMA Request Channel Map - */ - volatile u32 *reg_udccs; - volatile u32 *reg_ubcr; - volatile u32 *reg_uddr; -}; - -struct pxa2xx_request { - struct usb_request req; - struct list_head queue; -}; - -enum ep0_state { - EP0_IDLE, - EP0_IN_DATA_PHASE, - EP0_OUT_DATA_PHASE, - EP0_END_XFER, - EP0_STALL, -}; - -#define EP0_FIFO_SIZE ((unsigned)16) -#define BULK_FIFO_SIZE ((unsigned)64) -#define ISO_FIFO_SIZE ((unsigned)256) -#define INT_FIFO_SIZE ((unsigned)8) - -struct udc_stats { - struct ep0stats { - unsigned long ops; - unsigned long bytes; - } read, write; - unsigned long irqs; -}; - -#ifdef CONFIG_USB_PXA2XX_SMALL -/* when memory's tight, SMALL config saves code+data. */ -#define PXA_UDC_NUM_ENDPOINTS 3 -#endif - -#ifndef PXA_UDC_NUM_ENDPOINTS -#define PXA_UDC_NUM_ENDPOINTS 16 -#endif - -struct pxa2xx_udc { - struct usb_gadget gadget; - struct usb_gadget_driver *driver; - - enum ep0_state ep0state; - struct udc_stats stats; - unsigned got_irq : 1, - vbus : 1, - pullup : 1, - has_cfr : 1, - req_pending : 1, - req_std : 1, - req_config : 1, - suspended : 1, - active : 1; - -#define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200)) - struct timer_list timer; - - struct device *dev; - struct clk *clk; - struct pxa2xx_udc_mach_info *mach; - u64 dma_mask; - struct pxa2xx_ep ep [PXA_UDC_NUM_ENDPOINTS]; - -#ifdef CONFIG_USB_GADGET_DEBUG_FS - struct dentry *debugfs_udc; -#endif -}; - -/*-------------------------------------------------------------------------*/ - -#ifdef CONFIG_ARCH_LUBBOCK -#include -/* lubbock can also report usb connect/disconnect irqs */ -#endif - -static struct pxa2xx_udc *the_controller; - -/*-------------------------------------------------------------------------*/ - -/* - * Debugging support vanishes in non-debug builds. DBG_NORMAL should be - * mostly silent during normal use/testing, with no timing side-effects. - */ -#define DBG_NORMAL 1 /* error paths, device state transitions */ -#define DBG_VERBOSE 2 /* add some success path trace info */ -#define DBG_NOISY 3 /* ... even more: request level */ -#define DBG_VERY_NOISY 4 /* ... even more: packet level */ - -#define DMSG(stuff...) pr_debug("udc: " stuff) - -#ifdef DEBUG - -static int is_vbus_present(void); - -static const char *state_name[] = { - "EP0_IDLE", - "EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE", - "EP0_END_XFER", "EP0_STALL" -}; - -#ifdef VERBOSE_DEBUG -# define UDC_DEBUG DBG_VERBOSE -#else -# define UDC_DEBUG DBG_NORMAL -#endif - -static void __maybe_unused -dump_udccr(const char *label) -{ - u32 udccr = UDCCR; - DMSG("%s %02X =%s%s%s%s%s%s%s%s\n", - label, udccr, - (udccr & UDCCR_REM) ? " rem" : "", - (udccr & UDCCR_RSTIR) ? " rstir" : "", - (udccr & UDCCR_SRM) ? " srm" : "", - (udccr & UDCCR_SUSIR) ? " susir" : "", - (udccr & UDCCR_RESIR) ? " resir" : "", - (udccr & UDCCR_RSM) ? " rsm" : "", - (udccr & UDCCR_UDA) ? " uda" : "", - (udccr & UDCCR_UDE) ? " ude" : ""); -} - -static void __maybe_unused -dump_udccs0(const char *label) -{ - u32 udccs0 = UDCCS0; - - DMSG("%s %s %02X =%s%s%s%s%s%s%s%s\n", - label, state_name[the_controller->ep0state], udccs0, - (udccs0 & UDCCS0_SA) ? " sa" : "", - (udccs0 & UDCCS0_RNE) ? " rne" : "", - (udccs0 & UDCCS0_FST) ? " fst" : "", - (udccs0 & UDCCS0_SST) ? " sst" : "", - (udccs0 & UDCCS0_DRWF) ? " dwrf" : "", - (udccs0 & UDCCS0_FTF) ? " ftf" : "", - (udccs0 & UDCCS0_IPR) ? " ipr" : "", - (udccs0 & UDCCS0_OPR) ? " opr" : ""); -} - -static void __maybe_unused -dump_state(struct pxa2xx_udc *dev) -{ - u32 tmp; - unsigned i; - - DMSG("%s %s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n", - is_vbus_present() ? "host " : "disconnected", - state_name[dev->ep0state], - UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL); - dump_udccr("udccr"); - if (dev->has_cfr) { - tmp = UDCCFR; - DMSG("udccfr %02X =%s%s\n", tmp, - (tmp & UDCCFR_AREN) ? " aren" : "", - (tmp & UDCCFR_ACM) ? " acm" : ""); - } - - if (!dev->driver) { - DMSG("no gadget driver bound\n"); - return; - } else - DMSG("ep0 driver '%s'\n", dev->driver->driver.name); - - if (!is_vbus_present()) - return; - - dump_udccs0 ("udccs0"); - DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n", - dev->stats.write.bytes, dev->stats.write.ops, - dev->stats.read.bytes, dev->stats.read.ops); - - for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) { - if (dev->ep [i].desc == NULL) - continue; - DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccs); - } -} - -#else - -#define dump_udccr(x) do{}while(0) -#define dump_udccs0(x) do{}while(0) -#define dump_state(x) do{}while(0) - -#define UDC_DEBUG ((unsigned)0) - -#endif - -#define DBG(lvl, stuff...) do{if ((lvl) <= UDC_DEBUG) DMSG(stuff);}while(0) - -#define ERR(stuff...) pr_err("udc: " stuff) -#define WARN(stuff...) pr_warning("udc: " stuff) -#define INFO(stuff...) pr_info("udc: " stuff) - - -#endif /* __LINUX_USB_GADGET_PXA2XX_H */ -- cgit v1.2.2