From dd5f5006d1035547559c8a90781a7e249787a7a2 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 19 Aug 2014 17:37:55 +0200 Subject: usbcore: Fix wrong device in an error message in hub_port_connect() The commit [5ee0f803cc3a: usbcore: don't log on consecutive debounce failures of the same port] added the check of the reliable port, but it also replaced the device argument to dev_err() wrongly, which leads to a NULL dereference. This patch restores the right device, port_dev->dev. Also, since dev_err() itself shows the port number, reduce the port number shown in the error message, essentially reverting to the state before the commit 5ee0f803cc3a. [The fix suggested by Hannes, and the error message cleanup suggested by Alan Stern] Fixes: 5ee0f803cc3a ('usbcore: don't log on consecutive debounce failures of the same port') Reported-by: Hannes Reinecke Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/usb/core/hub.c') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 8a4dcbc7a75f..e0eaeb8697bb 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4631,9 +4631,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, if (status != -ENODEV && port1 != unreliable_port && printk_ratelimit()) - dev_err(&udev->dev, "connect-debounce failed, port %d disabled\n", - port1); - + dev_err(&port_dev->dev, "connect-debounce failed\n"); portstatus &= ~USB_PORT_STAT_CONNECTION; unreliable_port = port1; } else { -- cgit v1.2.2 From 5b1dc209d68c5fd223b7bd865a5cabad043dbc07 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 19 Aug 2014 08:56:21 +0800 Subject: usb: core: fix below build warning linux-2.6/drivers/usb/core/hub.c: In function 'usb_disconnect': linux-2.6/drivers/usb/core/hub.c:2110: warning: 'hub' may be used uninitialized in this function linux-2.6/drivers/usb/core/hub.c:2111: warning: 'port1' may be used uninitialized in this function Signed-off-by: Peter Chen Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/usb/core/hub.c') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index e0eaeb8697bb..97deb8e6b594 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2107,8 +2107,8 @@ void usb_disconnect(struct usb_device **pdev) { struct usb_port *port_dev = NULL; struct usb_device *udev = *pdev; - struct usb_hub *hub; - int port1; + struct usb_hub *hub = NULL; + int port1 = 1; /* mark the device as inactive, so any further urb submissions for * this device (and any of its children) will fail immediately. -- cgit v1.2.2 From bdd405d2a5287bdb9b04670ea255e1f122138e66 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 4 Aug 2014 12:44:46 +0300 Subject: usb: hub: Prevent hub autosuspend if usbcore.autosuspend is -1 If user specifies that USB autosuspend must be disabled by module parameter "usbcore.autosuspend=-1" then we must prevent autosuspend of USB hub devices as well. commit 596d789a211d introduced in v3.8 changed the original behaivour and stopped respecting the usbcore.autosuspend parameter for hubs. Fixes: 596d789a211d "USB: set hub's default autosuspend delay as 0" Cc: [3.8+] Signed-off-by: Roger Quadros Tested-by: Michael Welling Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/usb/core/hub.c') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 97deb8e6b594..003cb6b1a6bf 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1728,8 +1728,12 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) * - Change autosuspend delay of hub can avoid unnecessary auto * suspend timer for hub, also may decrease power consumption * of USB bus. + * + * - If user has indicated to prevent autosuspend by passing + * usbcore.autosuspend = -1 then keep autosuspend disabled. */ - pm_runtime_set_autosuspend_delay(&hdev->dev, 0); + if (hdev->dev.power.autosuspend_delay >= 0) + pm_runtime_set_autosuspend_delay(&hdev->dev, 0); /* * Hubs have proper suspend/resume support, except for root hubs -- cgit v1.2.2 From a9ef803d740bfadf5e505fbc57efa57692e27025 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 27 Aug 2014 16:55:29 -0700 Subject: USB: fix build error with CONFIG_PM_RUNTIME disabled commit bdd405d2a528 ("usb: hub: Prevent hub autosuspend if usbcore.autosuspend is -1") causes a build error if CONFIG_PM_RUNTIME is disabled. Fix that by doing a simple #ifdef guard around it. Reported-by: Stephen Rothwell Reported-by: kbuild test robot Cc: Roger Quadros Cc: Michael Welling Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/usb/core/hub.c') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 003cb6b1a6bf..46f5161c7891 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1732,8 +1732,10 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) * - If user has indicated to prevent autosuspend by passing * usbcore.autosuspend = -1 then keep autosuspend disabled. */ +#ifdef CONFIG_PM_RUNTIME if (hdev->dev.power.autosuspend_delay >= 0) pm_runtime_set_autosuspend_delay(&hdev->dev, 0); +#endif /* * Hubs have proper suspend/resume support, except for root hubs -- cgit v1.2.2 From c605f3cdff53a743f6d875b76956b239deca1272 Mon Sep 17 00:00:00 2001 From: Joe Lawrence Date: Wed, 10 Sep 2014 15:07:50 -0400 Subject: usb: hub: take hub->hdev reference when processing from eventlist During surprise device hotplug removal tests, it was observed that hub_events may try to call usb_lock_device on a device that has already been freed. Protect the usb_device by taking out a reference (under the hub_event_lock) when hub_events pulls it off the list, returning the reference after hub_events is finished using it. Signed-off-by: Joe Lawrence Suggested-by: David Bulkow for using kref Suggested-by: Alan Stern for placement Acked-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/usb/core/hub.c') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 46f5161c7891..d481c99a20d7 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -5024,9 +5024,10 @@ static void hub_events(void) hub = list_entry(tmp, struct usb_hub, event_list); kref_get(&hub->kref); + hdev = hub->hdev; + usb_get_dev(hdev); spin_unlock_irq(&hub_event_lock); - hdev = hub->hdev; hub_dev = hub->intfdev; intf = to_usb_interface(hub_dev); dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n", @@ -5139,6 +5140,7 @@ static void hub_events(void) usb_autopm_put_interface(intf); loop_disconnected: usb_unlock_device(hdev); + usb_put_dev(hdev); kref_put(&hub->kref, hub_release); } /* end while (1) */ -- cgit v1.2.2