From b729bf34535ed413667b397a2f59cfa81266facf Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 19 Aug 2014 20:29:19 +0300 Subject: spi/pxa2xx: Don't use slave_id of dma_slave_config That field has been deprecated in favour of getting the necessary information from ACPI/DT. However, we still need to deal systems that are PCI only (no ACPI to back up). In order to support such systems, we allow the DMA filter function and its corresponding parameter via pxa2xx_spi_master platform data. Then when the pxa2xx_spi_dma_setup() doesn't find the channel via ACPI, it falls back to use the given filter function. Suggested-by: Arnd Bergmann Signed-off-by: Mika Westerberg Signed-off-by: Andy Shevchenko Acked-by: Mark Brown Signed-off-by: Vinod Koul --- drivers/spi/spi-pxa2xx-dma.c | 15 ++--------- drivers/spi/spi-pxa2xx-pci.c | 64 ++++++++++++++++++++++++++++++++------------ drivers/spi/spi-pxa2xx.c | 2 -- 3 files changed, 49 insertions(+), 32 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c index c41ff148a2b4..62a9297e96ac 100644 --- a/drivers/spi/spi-pxa2xx-dma.c +++ b/drivers/spi/spi-pxa2xx-dma.c @@ -157,7 +157,6 @@ static struct dma_async_tx_descriptor * pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data, enum dma_transfer_direction dir) { - struct pxa2xx_spi_master *pdata = drv_data->master_info; struct chip_data *chip = drv_data->cur_chip; enum dma_slave_buswidth width; struct dma_slave_config cfg; @@ -184,7 +183,6 @@ pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data, cfg.dst_addr = drv_data->ssdr_physical; cfg.dst_addr_width = width; cfg.dst_maxburst = chip->dma_burst_size; - cfg.slave_id = pdata->tx_slave_id; sgt = &drv_data->tx_sgt; nents = drv_data->tx_nents; @@ -193,7 +191,6 @@ pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data, cfg.src_addr = drv_data->ssdr_physical; cfg.src_addr_width = width; cfg.src_maxburst = chip->dma_burst_size; - cfg.slave_id = pdata->rx_slave_id; sgt = &drv_data->rx_sgt; nents = drv_data->rx_nents; @@ -210,14 +207,6 @@ pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); } -static bool pxa2xx_spi_dma_filter(struct dma_chan *chan, void *param) -{ - const struct pxa2xx_spi_master *pdata = param; - - return chan->chan_id == pdata->tx_chan_id || - chan->chan_id == pdata->rx_chan_id; -} - bool pxa2xx_spi_dma_is_possible(size_t len) { return len <= MAX_DMA_LEN; @@ -321,12 +310,12 @@ int pxa2xx_spi_dma_setup(struct driver_data *drv_data) return -ENOMEM; drv_data->tx_chan = dma_request_slave_channel_compat(mask, - pxa2xx_spi_dma_filter, pdata, dev, "tx"); + pdata->dma_filter, pdata->tx_param, dev, "tx"); if (!drv_data->tx_chan) return -ENODEV; drv_data->rx_chan = dma_request_slave_channel_compat(mask, - pxa2xx_spi_dma_filter, pdata, dev, "rx"); + pdata->dma_filter, pdata->rx_param, dev, "rx"); if (!drv_data->rx_chan) { dma_release_channel(drv_data->tx_chan); drv_data->tx_chan = NULL; diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c index 20ebbc764693..0424b67c983e 100644 --- a/drivers/spi/spi-pxa2xx-pci.c +++ b/drivers/spi/spi-pxa2xx-pci.c @@ -10,6 +10,9 @@ #include #include +#include +#include + enum { PORT_CE4100, PORT_BYT, @@ -19,33 +22,41 @@ struct pxa_spi_info { enum pxa_ssp_type type; int port_id; int num_chipselect; - int tx_slave_id; - int tx_chan_id; - int rx_slave_id; - int rx_chan_id; unsigned long max_clk_rate; + + /* DMA channel request parameters */ + void *tx_param; + void *rx_param; }; +static struct dw_dma_slave byt_tx_param = { .dst_id = 0 }; +static struct dw_dma_slave byt_rx_param = { .src_id = 1 }; + +static bool lpss_dma_filter(struct dma_chan *chan, void *param) +{ + struct dw_dma_slave *dws = param; + + if (dws->dma_dev != chan->device->dev) + return false; + + chan->private = dws; + return true; +} + static struct pxa_spi_info spi_info_configs[] = { [PORT_CE4100] = { .type = PXA25x_SSP, .port_id = -1, .num_chipselect = -1, - .tx_slave_id = -1, - .tx_chan_id = -1, - .rx_slave_id = -1, - .rx_chan_id = -1, .max_clk_rate = 3686400, }, [PORT_BYT] = { .type = LPSS_SSP, .port_id = 0, .num_chipselect = 1, - .tx_slave_id = 0, - .tx_chan_id = 0, - .rx_slave_id = 1, - .rx_chan_id = 1, .max_clk_rate = 50000000, + .tx_param = &byt_tx_param, + .rx_param = &byt_rx_param, }, }; @@ -59,6 +70,7 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev, struct ssp_device *ssp; struct pxa_spi_info *c; char buf[40]; + struct pci_dev *dma_dev; ret = pcim_enable_device(dev); if (ret) @@ -73,11 +85,29 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev, memset(&spi_pdata, 0, sizeof(spi_pdata)); spi_pdata.num_chipselect = (c->num_chipselect > 0) ? c->num_chipselect : dev->devfn; - spi_pdata.tx_slave_id = c->tx_slave_id; - spi_pdata.tx_chan_id = c->tx_chan_id; - spi_pdata.rx_slave_id = c->rx_slave_id; - spi_pdata.rx_chan_id = c->rx_chan_id; - spi_pdata.enable_dma = c->rx_slave_id >= 0 && c->tx_slave_id >= 0; + + dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); + + if (c->tx_param) { + struct dw_dma_slave *slave = c->tx_param; + + slave->dma_dev = &dma_dev->dev; + slave->src_master = 1; + slave->dst_master = 0; + } + + if (c->rx_param) { + struct dw_dma_slave *slave = c->rx_param; + + slave->dma_dev = &dma_dev->dev; + slave->src_master = 1; + slave->dst_master = 0; + } + + spi_pdata.dma_filter = lpss_dma_filter; + spi_pdata.tx_param = c->tx_param; + spi_pdata.rx_param = c->rx_param; + spi_pdata.enable_dma = c->rx_param && c->tx_param; ssp = &spi_pdata.ssp; ssp->phys_base = pci_resource_start(dev, 0); diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index fe792106bdc5..256c0abbddd2 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1062,8 +1062,6 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev) pdata->num_chipselect = 1; pdata->enable_dma = true; - pdata->tx_chan_id = -1; - pdata->rx_chan_id = -1; return pdata; } -- cgit v1.2.2 From 39d36536d4e89461c0733a48d5ffc9b730751983 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 19 Aug 2014 20:29:21 +0300 Subject: spi/pxa2xx-pci: Add support for Intel Braswell Instead of one port we have 3 ports and all of them can take advantage of the shared DMA controller. Signed-off-by: Mika Westerberg Acked-by: Mark Brown Signed-off-by: Vinod Koul --- drivers/spi/spi-pxa2xx-pci.c | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c index 0424b67c983e..b2852947d3a2 100644 --- a/drivers/spi/spi-pxa2xx-pci.c +++ b/drivers/spi/spi-pxa2xx-pci.c @@ -16,6 +16,9 @@ enum { PORT_CE4100, PORT_BYT, + PORT_BSW0, + PORT_BSW1, + PORT_BSW2, }; struct pxa_spi_info { @@ -32,6 +35,13 @@ struct pxa_spi_info { static struct dw_dma_slave byt_tx_param = { .dst_id = 0 }; static struct dw_dma_slave byt_rx_param = { .src_id = 1 }; +static struct dw_dma_slave bsw0_tx_param = { .dst_id = 0 }; +static struct dw_dma_slave bsw0_rx_param = { .src_id = 1 }; +static struct dw_dma_slave bsw1_tx_param = { .dst_id = 6 }; +static struct dw_dma_slave bsw1_rx_param = { .src_id = 7 }; +static struct dw_dma_slave bsw2_tx_param = { .dst_id = 8 }; +static struct dw_dma_slave bsw2_rx_param = { .src_id = 9 }; + static bool lpss_dma_filter(struct dma_chan *chan, void *param) { struct dw_dma_slave *dws = param; @@ -58,6 +68,30 @@ static struct pxa_spi_info spi_info_configs[] = { .tx_param = &byt_tx_param, .rx_param = &byt_rx_param, }, + [PORT_BSW0] = { + .type = LPSS_SSP, + .port_id = 0, + .num_chipselect = 1, + .max_clk_rate = 50000000, + .tx_param = &bsw0_tx_param, + .rx_param = &bsw0_rx_param, + }, + [PORT_BSW1] = { + .type = LPSS_SSP, + .port_id = 1, + .num_chipselect = 1, + .max_clk_rate = 50000000, + .tx_param = &bsw1_tx_param, + .rx_param = &bsw1_rx_param, + }, + [PORT_BSW2] = { + .type = LPSS_SSP, + .port_id = 2, + .num_chipselect = 1, + .max_clk_rate = 50000000, + .tx_param = &bsw2_tx_param, + .rx_param = &bsw2_rx_param, + }, }; static int pxa2xx_spi_pci_probe(struct pci_dev *dev, @@ -159,6 +193,9 @@ static void pxa2xx_spi_pci_remove(struct pci_dev *dev) static const struct pci_device_id pxa2xx_spi_pci_devices[] = { { PCI_VDEVICE(INTEL, 0x2e6a), PORT_CE4100 }, { PCI_VDEVICE(INTEL, 0x0f0e), PORT_BYT }, + { PCI_VDEVICE(INTEL, 0x228e), PORT_BSW0 }, + { PCI_VDEVICE(INTEL, 0x2290), PORT_BSW1 }, + { PCI_VDEVICE(INTEL, 0x22ac), PORT_BSW2 }, { }, }; MODULE_DEVICE_TABLE(pci, pxa2xx_spi_pci_devices); -- cgit v1.2.2