From fdb3c18d639311287dc4675abe743847a1aa62a8 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 12 Feb 2007 00:52:37 -0800 Subject: [PATCH] SPI controller driver for OMAP Microwire This adds a SPI driver for the Microwire controller on OMAP1 chips. This driver has been used in the Linux-OMAP tree for some time now, including with some of those displays using standardized 9-bit commands followed by data with 8-bit words. Microwire only supports half duplex transfers, but that's all that most SPI protocols need. When full duplex, or higher speeds, are needed there are several other controllers that can be used on OMAP. [akpm@osdl.org: cleanups] Signed-off-by: David Brownell Signed-off-by: Imre Deak Signed-off-by: Juha Yrjola Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/Kconfig | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/spi/Kconfig') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 43d41f50b84a..2a2f44d1367d 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -87,6 +87,13 @@ config SPI_MPC83xx family of PowerPC processors. The MPC83xx uses a simple set of shift registers for data (opposed to the CPM based descriptor model). +config SPI_OMAP_UWIRE + tristate "OMAP1 MicroWire" + depends on SPI_MASTER && ARCH_OMAP1 + select SPI_BITBANG + help + This hooks up to the MicroWire controller on OMAP1 chips. + config SPI_PXA2XX tristate "PXA2xx SSP SPI master" depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL -- cgit v1.2.2