From 69edbba0021a48fe034849501513930f6175cb5d Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 25 Dec 2008 18:17:34 +0900 Subject: sh: use gpiolib This patch updates the SuperH gpio code to make use of gpiolib. The gpiolib callbacks get() and set() are lockless, but we use our own spinlock for the other operations to make sure hardware register bitfield accesses stay atomic. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/serial') diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 3599828b9766..6a7cd498023d 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -1,6 +1,6 @@ #include #include -#include +#include #if defined(CONFIG_H83007) || defined(CONFIG_H83068) #include -- cgit v1.2.2 From 973e5d525d39be6f9f6c38d37aacf03efda02e60 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 24 Feb 2009 15:57:12 +0900 Subject: serial: sh-sci: console drainage Modify the serial console code to wait for the transmit FIFO, make sure all bits have been put on the wire before returning. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/serial') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 557b54ab2f25..d3ccce0bfd44 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -139,7 +139,7 @@ static void sci_poll_put_char(struct uart_port *port, unsigned char c) } while (!(status & SCxSR_TDxE(port))); sci_in(port, SCxSR); /* Dummy read */ - sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); + sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port)); sci_out(port, SCxTDR, c); } #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */ @@ -1095,6 +1095,7 @@ static void serial_console_write(struct console *co, const char *s, unsigned count) { struct uart_port *port = &serial_console_port->port; + unsigned short bits; int i; for (i = 0; i < count; i++) { @@ -1103,6 +1104,11 @@ static void serial_console_write(struct console *co, const char *s, sci_poll_put_char(port, *s++); } + + /* wait until fifo is empty and last bit has been transmitted */ + bits = SCxSR_TDxE(port) | SCxSR_TEND(port); + while ((sci_in(port, SCxSR) & bits) != bits) + cpu_relax(); } static int __init serial_console_setup(struct console *co, char *options) -- cgit v1.2.2 From 55ba99eb211a06709237cb322ecd8c8b6faf6159 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 3 Mar 2009 15:40:25 +0900 Subject: sh: Add support for SH7786 CPU subtype. This adds preliminary support for the SH7786 CPU subtype. While this is a dual-core CPU, only UP is supported for now. L2 cache support is likewise not yet implemented. More information on this particular CPU subtype is available at: http://www.renesas.com/fmwk.jsp?cnt=sh7786_root.jsp&fp=/products/mpumcu/superh_family/sh7780_series/sh7786_group/ Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 4 +++- drivers/serial/sh-sci.h | 13 +++++++++---- 2 files changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index d3ccce0bfd44..dbf5357a77b3 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -263,6 +263,7 @@ static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) #elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) || \ defined(CONFIG_CPU_SUBTYPE_SHX3) static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) { @@ -284,7 +285,8 @@ static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) static inline int scif_txroom(struct uart_port *port) { return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff); diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index bb9fe1224880..d0aa82d7fce0 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -126,7 +126,8 @@ # define SCSPTR1 0xffe10024 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7785) +#elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) # define SCSPTR0 0xffea0024 /* 16 bit SCIF */ # define SCSPTR1 0xffeb0024 /* 16 bit SCIF */ # define SCSPTR2 0xffec0024 /* 16 bit SCIF */ @@ -182,6 +183,7 @@ defined(CONFIG_CPU_SUBTYPE_SH7763) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) || \ defined(CONFIG_CPU_SUBTYPE_SHX3) #define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */ #else @@ -413,7 +415,8 @@ SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8) SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16) #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) @@ -644,7 +647,8 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } -#elif defined(CONFIG_CPU_SUBTYPE_SH7785) +#elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffea0000) @@ -746,7 +750,8 @@ static inline int sci_rxd_in(struct uart_port *port) */ #if defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1) #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ -- cgit v1.2.2 From 290a5589ce83540d0aba811c3d15af34aa373533 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 14 Jan 2009 19:12:42 +0800 Subject: [ARM] pxa: remove machine class specific stuffs from serial driver The only things prevent drivers/serial/pxa.c from being generic enough are: 1. IER_UUE which can be safely replaced by UART_IER_UUE as defined in serial_reg.h for PXA 2. __PREG() and FFUART/BTUART/STUART definitions to decide the UART port name And removed the un-necessary #include of and headers. Signed-off-by: Eric Miao --- drivers/serial/pxa.c | 30 ++++++++++-------------------- 1 file changed, 10 insertions(+), 20 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index f6e3b86bb0be..a48a8a13d87b 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -43,13 +43,7 @@ #include #include #include - -#include -#include -#include -#include -#include - +#include struct uart_pxa_port { struct uart_port port; @@ -491,7 +485,7 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, * Ensure the port will be enabled. * This is required especially for serial console. */ - up->ier |= IER_UUE; + up->ier |= UART_IER_UUE; /* * Update the per-port timeout. @@ -784,19 +778,15 @@ static int serial_pxa_probe(struct platform_device *dev) sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; sport->port.uartclk = clk_get_rate(sport->clk); - /* - * Is it worth keeping this? - */ - if (mmres->start == __PREG(FFUART)) - sport->name = "FFUART"; - else if (mmres->start == __PREG(BTUART)) - sport->name = "BTUART"; - else if (mmres->start == __PREG(STUART)) - sport->name = "STUART"; - else if (mmres->start == __PREG(HWUART)) - sport->name = "HWUART"; - else + switch (dev->id) { + case 0: sport->name = "FFUART"; break; + case 1: sport->name = "BTUART"; break; + case 2: sport->name = "STUART"; break; + case 3: sport->name = "HWUART"; break; + default: sport->name = "???"; + break; + } sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1); if (!sport->port.membase) { -- cgit v1.2.2 From e65fb0099fe4fe82d59ffe84f1e88a489218d7f9 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 16 Feb 2009 14:29:10 +0100 Subject: [ARM] MXC: remove _clk suffix from clock names The context makes it clear already that these are clocks, so there's no need for such a suffix. This patch only changes the clocks actually used in the tree. The remaining clocks are renamed in the subsequent architecture specific patches. Signed-off-by: Sascha Hauer --- drivers/serial/imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/serial') diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index a50954612b60..9f460b175c50 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -1129,7 +1129,7 @@ static int serial_imx_probe(struct platform_device *pdev) sport->timer.function = imx_timeout; sport->timer.data = (unsigned long)sport; - sport->clk = clk_get(&pdev->dev, "uart_clk"); + sport->clk = clk_get(&pdev->dev, "uart"); if (IS_ERR(sport->clk)) { ret = PTR_ERR(sport->clk); goto unmap; -- cgit v1.2.2 From 56422554d29e3761b095b3e27646e8ee03fae41a Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Thu, 5 Feb 2009 13:42:47 +0800 Subject: [ARM] pxa: allow reuse of serial driver for pxa168 Signed-off-by: Eric Miao --- drivers/serial/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/serial') diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 7d7f576da202..9be11b0963f2 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -628,7 +628,7 @@ config SERIAL_MPSC_CONSOLE config SERIAL_PXA bool "PXA serial port support" - depends on ARM && ARCH_PXA + depends on ARCH_PXA || ARCH_MMP select SERIAL_CORE help If you have a machine based on an Intel XScale PXA2xx CPU you -- cgit v1.2.2 From 65a212dd71ffd99c83ad780205932fcb96a973b6 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Tue, 24 Mar 2009 16:38:21 -0700 Subject: serial: struct device - replace bus_id with dev_name(), dev_set_name() Cc: davem@davemloft.net Acked-by: Greg Kroah-Hartman Signed-off-by: Kay Sievers --- drivers/serial/sunzilog.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index 45a299f35617..e09d3cebb4fb 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -1438,12 +1438,12 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m } else { printk(KERN_INFO "%s: Keyboard at MMIO 0x%llx (irq = %d) " "is a %s\n", - op->dev.bus_id, + dev_name(&op->dev), (unsigned long long) up[0].port.mapbase, op->irqs[0], sunzilog_type(&up[0].port)); printk(KERN_INFO "%s: Mouse at MMIO 0x%llx (irq = %d) " "is a %s\n", - op->dev.bus_id, + dev_name(&op->dev), (unsigned long long) up[1].port.mapbase, op->irqs[0], sunzilog_type(&up[1].port)); kbm_inst++; -- cgit v1.2.2 From 997302259f386bca8fe1db67c50296ca426c438f Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 25 Mar 2009 10:21:35 +0000 Subject: [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h Signed-off-by: Russell King --- drivers/serial/21285.c | 2 +- drivers/serial/clps711x.c | 2 +- drivers/serial/sa1100.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c index f31c6698419c..cb6d85d7ff43 100644 --- a/drivers/serial/21285.c +++ b/drivers/serial/21285.c @@ -14,8 +14,8 @@ #include #include #include +#include -#include #include #include #include diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c index 459f3420a429..80e76426131d 100644 --- a/drivers/serial/clps711x.c +++ b/drivers/serial/clps711x.c @@ -38,9 +38,9 @@ #include #include #include +#include #include -#include #include #include diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c index b24a25ea6bc5..94530f01521e 100644 --- a/drivers/serial/sa1100.c +++ b/drivers/serial/sa1100.c @@ -36,8 +36,8 @@ #include #include #include +#include -#include #include #include #include -- cgit v1.2.2