From 623f41eb923d7f34888cbd9e4f50a7b1a79d0ae5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 21 Apr 2005 22:06:13 -0700 Subject: [SPARC64]: In sunsu driver, make sure to fully init chip for kbd/ms We were forgetting to call sunsu_change_speed(). The reason that replugging in the mouse cable "fixes things" is that causes a BREAK interrupt which in turn caused a call to sunsu_change_speed() which would get the chip setup properly. Signed-off-by: David S. Miller --- drivers/serial/sunsu.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers/serial/sunsu.c') diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 23d19d394320..ddc97c905e14 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1285,6 +1285,7 @@ static struct uart_driver sunsu_reg = { static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up, int channel) { + int quot, baud; #ifdef CONFIG_SERIO struct serio *serio; #endif @@ -1293,10 +1294,14 @@ static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up, int channel) up->port.type = PORT_UNKNOWN; up->port.uartclk = (SU_BASE_BAUD * 16); - if (up->su_type == SU_PORT_KBD) + if (up->su_type == SU_PORT_KBD) { up->cflag = B1200 | CS8 | CLOCAL | CREAD; - else + baud = 1200; + } else { up->cflag = B4800 | CS8 | CLOCAL | CREAD; + baud = 4800; + } + quot = up->port.uartclk / (16 * baud); sunsu_autoconfig(up); if (up->port.type == PORT_UNKNOWN) @@ -1337,6 +1342,8 @@ static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up, int channel) } #endif + sunsu_change_speed(&up->port, up->cflag, 0, quot); + sunsu_startup(&up->port); return 0; } -- cgit v1.2.2