From 52e15f0eae193a8e4ca31c1520179b8d65c79811 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Fri, 2 Jan 2009 13:40:14 +0000 Subject: Blackfin Serial Driver: updates kgdb over Blackfin serial driver with kgdb framework Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 187 ++++++++++++++++++++++------------------------ 1 file changed, 89 insertions(+), 98 deletions(-) (limited to 'drivers/serial/bfin_5xx.c') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 569f0e2476c6..d63fad7363b7 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -22,7 +22,8 @@ #include #include -#ifdef CONFIG_KGDB_UART +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) #include #include #endif @@ -45,6 +46,16 @@ static struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; static int nr_active_ports = ARRAY_SIZE(bfin_serial_resource); +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + +# ifndef CONFIG_SERIAL_BFIN_PIO +# error KGDB only support UART in PIO mode. +# endif + +static int kgdboc_port_line; +static int kgdboc_break_enabled; +#endif /* * Setup for console. Argument comes from the menuconfig */ @@ -110,9 +121,7 @@ static void bfin_serial_start_tx(struct uart_port *port) static void bfin_serial_stop_rx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; -#ifdef CONFIG_KGDB_UART - if (uart->port.line != CONFIG_KGDB_UART_PORT) -#endif + UART_CLEAR_IER(uart, ERBFI); } @@ -123,49 +132,6 @@ static void bfin_serial_enable_ms(struct uart_port *port) { } -#ifdef CONFIG_KGDB_UART -static int kgdb_entry_state; - -void kgdb_put_debug_char(int chr) -{ - struct bfin_serial_port *uart; - - if (CONFIG_KGDB_UART_PORT < 0 - || CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS) - uart = &bfin_serial_ports[0]; - else - uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; - - while (!(UART_GET_LSR(uart) & THRE)) { - SSYNC(); - } - - UART_CLEAR_DLAB(uart); - UART_PUT_CHAR(uart, (unsigned char)chr); - SSYNC(); -} - -int kgdb_get_debug_char(void) -{ - struct bfin_serial_port *uart; - unsigned char chr; - - if (CONFIG_KGDB_UART_PORT < 0 - || CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS) - uart = &bfin_serial_ports[0]; - else - uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; - - while(!(UART_GET_LSR(uart) & DR)) { - SSYNC(); - } - UART_CLEAR_DLAB(uart); - chr = UART_GET_CHAR(uart); - SSYNC(); - - return chr; -} -#endif #if ANOMALY_05000363 && defined(CONFIG_SERIAL_BFIN_PIO) # define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold) @@ -178,7 +144,7 @@ int kgdb_get_debug_char(void) #ifdef CONFIG_SERIAL_BFIN_PIO static void bfin_serial_rx_chars(struct bfin_serial_port *uart) { - struct tty_struct *tty = uart->port.info->port.tty; + struct tty_struct *tty = NULL; unsigned int status, ch, flg; static struct timeval anomaly_start = { .tv_sec = 0 }; @@ -188,27 +154,18 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) ch = UART_GET_CHAR(uart); uart->port.icount.rx++; -#ifdef CONFIG_KGDB_UART - if (uart->port.line == CONFIG_KGDB_UART_PORT) { - struct pt_regs *regs = get_irq_regs(); - if (uart->port.cons->index == CONFIG_KGDB_UART_PORT && ch == 0x1) { /* Ctrl + A */ - kgdb_breakkey_pressed(regs); - return; - } else if (kgdb_entry_state == 0 && ch == '$') {/* connection from KGDB */ - kgdb_entry_state = 1; - } else if (kgdb_entry_state == 1 && ch == 'q') { - kgdb_entry_state = 0; - kgdb_breakkey_pressed(regs); +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + if (kgdb_connected && kgdboc_port_line == uart->port.line) + if (ch == 0x3) {/* Ctrl + C */ + kgdb_breakpoint(); return; - } else if (ch == 0x3) {/* Ctrl + C */ - kgdb_entry_state = 0; - kgdb_breakkey_pressed(regs); - return; - } else { - kgdb_entry_state = 0; } - } + + if (!uart->port.info || !uart->port.info->tty) + return; #endif + tty = uart->port.info->tty; if (ANOMALY_05000363) { /* The BF533 (and BF561) family of processors have a nice anomaly @@ -630,16 +587,16 @@ static int bfin_serial_startup(struct uart_port *port) uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; add_timer(&(uart->rx_dma_timer)); #else +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + if (kgdboc_port_line == uart->port.line && kgdboc_break_enabled) + kgdboc_break_enabled = 0; + else { +# endif if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED, "BFIN_UART_RX", uart)) { -# ifdef CONFIG_KGDB_UART - if (uart->port.line != CONFIG_KGDB_UART_PORT) { -# endif printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n"); return -EBUSY; -# ifdef CONFIG_KGDB_UART - } -# endif } if (request_irq @@ -685,6 +642,10 @@ static int bfin_serial_startup(struct uart_port *port) } } # endif +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + } +# endif #endif UART_SET_IER(uart, ERBFI); return 0; @@ -715,9 +676,6 @@ static void bfin_serial_shutdown(struct uart_port *port) default: break; }; -#endif -#ifdef CONFIG_KGDB_UART - if (uart->port.line != CONFIG_KGDB_UART_PORT) #endif free_irq(uart->port.irq, uart); free_irq(uart->port.irq+1, uart); @@ -887,6 +845,51 @@ static void bfin_serial_set_ldisc(struct uart_port *port) } } +#ifdef CONFIG_CONSOLE_POLL +static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + + while (!(UART_GET_LSR(uart) & THRE)) + cpu_relax(); + + UART_CLEAR_DLAB(uart); + UART_PUT_CHAR(uart, (unsigned char)chr); +} + +static int bfin_serial_poll_get_char(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + unsigned char chr; + + while (!(UART_GET_LSR(uart) & DR)) + cpu_relax(); + + UART_CLEAR_DLAB(uart); + chr = UART_GET_CHAR(uart); + + return chr; +} +#endif + +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) +static void bfin_kgdboc_port_shutdown(struct uart_port *port) +{ + if (kgdboc_break_enabled) { + kgdboc_break_enabled = 0; + bfin_serial_shutdown(port); + } +} + +static int bfin_kgdboc_port_startup(struct uart_port *port) +{ + kgdboc_port_line = port->line; + kgdboc_break_enabled = !bfin_serial_startup(port); + return 0; +} +#endif + static struct uart_ops bfin_serial_pops = { .tx_empty = bfin_serial_tx_empty, .set_mctrl = bfin_serial_set_mctrl, @@ -905,6 +908,15 @@ static struct uart_ops bfin_serial_pops = { .request_port = bfin_serial_request_port, .config_port = bfin_serial_config_port, .verify_port = bfin_serial_verify_port, +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + .kgdboc_port_startup = bfin_kgdboc_port_startup, + .kgdboc_port_shutdown = bfin_kgdboc_port_shutdown, +#endif +#ifdef CONFIG_CONSOLE_POLL + .poll_put_char = bfin_serial_poll_put_char, + .poll_get_char = bfin_serial_poll_get_char, +#endif }; static void __init bfin_serial_init_ports(void) @@ -1076,10 +1088,7 @@ static int __init bfin_serial_rs_console_init(void) { bfin_serial_init_ports(); register_console(&bfin_serial_console); -#ifdef CONFIG_KGDB_UART - kgdb_entry_state = 0; - init_kgdb_uart(); -#endif + return 0; } console_initcall(bfin_serial_rs_console_init); @@ -1235,10 +1244,6 @@ static struct platform_driver bfin_serial_driver = { static int __init bfin_serial_init(void) { int ret; -#ifdef CONFIG_KGDB_UART - struct bfin_serial_port *uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; - struct ktermios t; -#endif pr_info("Serial: Blackfin serial driver\n"); @@ -1252,21 +1257,6 @@ static int __init bfin_serial_init(void) uart_unregister_driver(&bfin_serial_reg); } } -#ifdef CONFIG_KGDB_UART - if (uart->port.cons->index != CONFIG_KGDB_UART_PORT) { - request_irq(uart->port.irq, bfin_serial_rx_int, - IRQF_DISABLED, "BFIN_UART_RX", uart); - pr_info("Request irq for kgdb uart port\n"); - UART_SET_IER(uart, ERBFI); - SSYNC(); - t.c_cflag = CS8|B57600; - t.c_iflag = 0; - t.c_oflag = 0; - t.c_lflag = ICANON; - t.c_line = CONFIG_KGDB_UART_PORT; - bfin_serial_set_termios(&uart->port, &t, &t); - } -#endif return ret; } @@ -1276,6 +1266,7 @@ static void __exit bfin_serial_exit(void) uart_unregister_driver(&bfin_serial_reg); } + module_init(bfin_serial_init); module_exit(bfin_serial_exit); -- cgit v1.2.2