From 3d71644cf952fd1157a13173237258422ba3c569 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Wed, 6 Jul 2005 10:30:26 -0700 Subject: [SCSI] qla2xxx: Add ISP24xx definitions. Add ISP24xx definitions. Add requisite structure definitions and #define's for ISP24xx support. Also drop volatile modifiers from device_reg_* register layouts as the members are never really accessed, only their offsets within the layout are used during reads and writes. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_dbg.c | 6 +- drivers/scsi/qla2xxx/qla_def.h | 278 ++++++---- drivers/scsi/qla2xxx/qla_fw.h | 1076 +++++++++++++++++++++++++++++++++++++ drivers/scsi/qla2xxx/qla_init.c | 49 +- drivers/scsi/qla2xxx/qla_inline.h | 11 + drivers/scsi/qla2xxx/qla_iocb.c | 8 +- drivers/scsi/qla2xxx/qla_isr.c | 14 +- drivers/scsi/qla2xxx/qla_mbx.c | 2 +- drivers/scsi/qla2xxx/qla_os.c | 8 +- drivers/scsi/qla2xxx/qla_rscn.c | 2 +- drivers/scsi/qla2xxx/qla_sup.c | 16 +- 11 files changed, 1318 insertions(+), 152 deletions(-) create mode 100644 drivers/scsi/qla2xxx/qla_fw.h (limited to 'drivers/scsi') diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 20f4ed1cd7ff..8e93dd7065a1 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -36,7 +36,7 @@ qla2300_fw_dump(scsi_qla_host_t *ha, int hardware_locked) uint16_t mb0, mb2; uint32_t stat; - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; uint16_t __iomem *dmp_reg; unsigned long flags; struct qla2300_fw_dump *fw; @@ -587,7 +587,7 @@ qla2100_fw_dump(scsi_qla_host_t *ha, int hardware_locked) uint32_t cnt, timer; uint16_t risc_address; uint16_t mb0, mb2; - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; uint16_t __iomem *dmp_reg; unsigned long flags; struct qla2100_fw_dump *fw; @@ -984,7 +984,7 @@ qla_uprintf(char **uiter, char *fmt, ...) void qla2x00_dump_regs(scsi_qla_host_t *ha) { - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; printk("Mailbox registers:\n"); printk("scsi(%ld): mbox 0 0x%04x \n", diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 13901c24b9a0..03074e52160f 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -75,9 +75,28 @@ #define IS_QLA6322(ha) 0 #endif +#if defined(CONFIG_SCSI_QLA24XX) || defined(CONFIG_SCSI_QLA24XX_MODULE) +#define IS_QLA2422(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422) +#define IS_QLA2432(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432) +#else +#define IS_QLA2422(ha) 0 +#define IS_QLA2432(ha) 0 +#endif + +#if defined(CONFIG_SCSI_QLA25XX) || defined(CONFIG_SCSI_QLA25XX_MODULE) +#define IS_QLA2512(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2512) +#define IS_QLA2522(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2522) +#else +#define IS_QLA2512(ha) 0 +#define IS_QLA2522(ha) 0 +#endif + #define IS_QLA23XX(ha) (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA2322(ha) || \ IS_QLA6312(ha) || IS_QLA6322(ha)) +#define IS_QLA24XX(ha) (IS_QLA2422(ha) || IS_QLA2432(ha)) +#define IS_QLA25XX(ha) (IS_QLA2512(ha) || IS_QLA2522(ha)) + /* * Only non-ISP2[12]00 have extended addressing support in the firmware. */ @@ -191,10 +210,18 @@ #define MANAGEMENT_SERVER 0xfe #define BROADCAST 0xff -#define RESERVED_LOOP_ID(x) ((x > LAST_LOCAL_LOOP_ID && \ - x < SNS_FIRST_LOOP_ID) || \ - x == MANAGEMENT_SERVER || \ - x == BROADCAST) +/* + * There is no correspondence between an N-PORT id and an AL_PA. Therefore the + * valid range of an N-PORT id is 0 through 0x7ef. + */ +#define NPH_LAST_HANDLE 0x7ef +#define NPH_SNS 0x7fc /* FFFFFC */ +#define NPH_FABRIC_CONTROLLER 0x7fd /* FFFFFD */ +#define NPH_F_PORT 0x7fe /* FFFFFE */ +#define NPH_IP_BROADCAST 0x7ff /* FFFFFF */ + +#define MAX_CMDSZ 16 /* SCSI maximum CDB size. */ +#include "qla_fw.h" /* * Timeout timer counts in seconds @@ -211,6 +238,7 @@ #define REQUEST_ENTRY_CNT_2100 128 /* Number of request entries. */ #define REQUEST_ENTRY_CNT_2200 2048 /* Number of request entries. */ #define REQUEST_ENTRY_CNT_2XXX_EXT_MEM 4096 /* Number of request entries. */ +#define REQUEST_ENTRY_CNT_24XX 4096 /* Number of request entries. */ #define RESPONSE_ENTRY_CNT_2100 64 /* Number of response entries.*/ #define RESPONSE_ENTRY_CNT_2300 512 /* Number of response entries.*/ @@ -279,24 +307,24 @@ typedef struct srb { /* * ISP I/O Register Set structure definitions. */ -typedef volatile struct { - volatile uint16_t flash_address; /* Flash BIOS address */ - volatile uint16_t flash_data; /* Flash BIOS data */ +struct device_reg_2xxx { + uint16_t flash_address; /* Flash BIOS address */ + uint16_t flash_data; /* Flash BIOS data */ uint16_t unused_1[1]; /* Gap */ - volatile uint16_t ctrl_status; /* Control/Status */ + uint16_t ctrl_status; /* Control/Status */ #define CSR_FLASH_64K_BANK BIT_3 /* Flash upper 64K bank select */ #define CSR_FLASH_ENABLE BIT_1 /* Flash BIOS Read/Write enable */ #define CSR_ISP_SOFT_RESET BIT_0 /* ISP soft reset */ - volatile uint16_t ictrl; /* Interrupt control */ + uint16_t ictrl; /* Interrupt control */ #define ICR_EN_INT BIT_15 /* ISP enable interrupts. */ #define ICR_EN_RISC BIT_3 /* ISP enable RISC interrupts. */ - volatile uint16_t istatus; /* Interrupt status */ + uint16_t istatus; /* Interrupt status */ #define ISR_RISC_INT BIT_3 /* RISC interrupt */ - volatile uint16_t semaphore; /* Semaphore */ - volatile uint16_t nvram; /* NVRAM register. */ + uint16_t semaphore; /* Semaphore */ + uint16_t nvram; /* NVRAM register. */ #define NVR_DESELECT 0 #define NVR_BUSY BIT_15 #define NVR_WRT_ENABLE BIT_14 /* Write enable */ @@ -308,78 +336,78 @@ typedef volatile struct { union { struct { - volatile uint16_t mailbox0; - volatile uint16_t mailbox1; - volatile uint16_t mailbox2; - volatile uint16_t mailbox3; - volatile uint16_t mailbox4; - volatile uint16_t mailbox5; - volatile uint16_t mailbox6; - volatile uint16_t mailbox7; - uint16_t unused_2[59]; /* Gap */ + uint16_t mailbox0; + uint16_t mailbox1; + uint16_t mailbox2; + uint16_t mailbox3; + uint16_t mailbox4; + uint16_t mailbox5; + uint16_t mailbox6; + uint16_t mailbox7; + uint16_t unused_2[59]; /* Gap */ } __attribute__((packed)) isp2100; struct { - /* Request Queue */ - volatile uint16_t req_q_in; /* In-Pointer */ - volatile uint16_t req_q_out; /* Out-Pointer */ - /* Response Queue */ - volatile uint16_t rsp_q_in; /* In-Pointer */ - volatile uint16_t rsp_q_out; /* Out-Pointer */ + /* Request Queue */ + uint16_t req_q_in; /* In-Pointer */ + uint16_t req_q_out; /* Out-Pointer */ + /* Response Queue */ + uint16_t rsp_q_in; /* In-Pointer */ + uint16_t rsp_q_out; /* Out-Pointer */ /* RISC to Host Status */ - volatile uint32_t host_status; + uint32_t host_status; #define HSR_RISC_INT BIT_15 /* RISC interrupt */ #define HSR_RISC_PAUSED BIT_8 /* RISC Paused */ /* Host to Host Semaphore */ - volatile uint16_t host_semaphore; - uint16_t unused_3[17]; /* Gap */ - volatile uint16_t mailbox0; - volatile uint16_t mailbox1; - volatile uint16_t mailbox2; - volatile uint16_t mailbox3; - volatile uint16_t mailbox4; - volatile uint16_t mailbox5; - volatile uint16_t mailbox6; - volatile uint16_t mailbox7; - volatile uint16_t mailbox8; - volatile uint16_t mailbox9; - volatile uint16_t mailbox10; - volatile uint16_t mailbox11; - volatile uint16_t mailbox12; - volatile uint16_t mailbox13; - volatile uint16_t mailbox14; - volatile uint16_t mailbox15; - volatile uint16_t mailbox16; - volatile uint16_t mailbox17; - volatile uint16_t mailbox18; - volatile uint16_t mailbox19; - volatile uint16_t mailbox20; - volatile uint16_t mailbox21; - volatile uint16_t mailbox22; - volatile uint16_t mailbox23; - volatile uint16_t mailbox24; - volatile uint16_t mailbox25; - volatile uint16_t mailbox26; - volatile uint16_t mailbox27; - volatile uint16_t mailbox28; - volatile uint16_t mailbox29; - volatile uint16_t mailbox30; - volatile uint16_t mailbox31; - volatile uint16_t fb_cmd; - uint16_t unused_4[10]; /* Gap */ + uint16_t host_semaphore; + uint16_t unused_3[17]; /* Gap */ + uint16_t mailbox0; + uint16_t mailbox1; + uint16_t mailbox2; + uint16_t mailbox3; + uint16_t mailbox4; + uint16_t mailbox5; + uint16_t mailbox6; + uint16_t mailbox7; + uint16_t mailbox8; + uint16_t mailbox9; + uint16_t mailbox10; + uint16_t mailbox11; + uint16_t mailbox12; + uint16_t mailbox13; + uint16_t mailbox14; + uint16_t mailbox15; + uint16_t mailbox16; + uint16_t mailbox17; + uint16_t mailbox18; + uint16_t mailbox19; + uint16_t mailbox20; + uint16_t mailbox21; + uint16_t mailbox22; + uint16_t mailbox23; + uint16_t mailbox24; + uint16_t mailbox25; + uint16_t mailbox26; + uint16_t mailbox27; + uint16_t mailbox28; + uint16_t mailbox29; + uint16_t mailbox30; + uint16_t mailbox31; + uint16_t fb_cmd; + uint16_t unused_4[10]; /* Gap */ } __attribute__((packed)) isp2300; } u; - volatile uint16_t fpm_diag_config; + uint16_t fpm_diag_config; uint16_t unused_5[0x6]; /* Gap */ - volatile uint16_t pcr; /* Processor Control Register. */ + uint16_t pcr; /* Processor Control Register. */ uint16_t unused_6[0x5]; /* Gap */ - volatile uint16_t mctr; /* Memory Configuration and Timing. */ + uint16_t mctr; /* Memory Configuration and Timing. */ uint16_t unused_7[0x3]; /* Gap */ - volatile uint16_t fb_cmd_2100; /* Unused on 23XX */ + uint16_t fb_cmd_2100; /* Unused on 23XX */ uint16_t unused_8[0x3]; /* Gap */ - volatile uint16_t hccr; /* Host command & control register. */ + uint16_t hccr; /* Host command & control register. */ #define HCCR_HOST_INT BIT_7 /* Host interrupt bit */ #define HCCR_RISC_PAUSE BIT_5 /* Pause mode bit */ /* HCCR commands */ @@ -393,8 +421,8 @@ typedef volatile struct { #define HCCR_ENABLE_PARITY 0xA000 /* Enable PARITY interrupt */ uint16_t unused_9[5]; /* Gap */ - volatile uint16_t gpiod; /* GPIO Data register. */ - volatile uint16_t gpioe; /* GPIO Enable register. */ + uint16_t gpiod; /* GPIO Data register. */ + uint16_t gpioe; /* GPIO Enable register. */ #define GPIO_LED_MASK 0x00C0 #define GPIO_LED_GREEN_OFF_AMBER_OFF 0x0000 #define GPIO_LED_GREEN_ON_AMBER_OFF 0x0040 @@ -403,25 +431,32 @@ typedef volatile struct { union { struct { - uint16_t unused_10[8]; /* Gap */ - volatile uint16_t mailbox8; - volatile uint16_t mailbox9; - volatile uint16_t mailbox10; - volatile uint16_t mailbox11; - volatile uint16_t mailbox12; - volatile uint16_t mailbox13; - volatile uint16_t mailbox14; - volatile uint16_t mailbox15; - volatile uint16_t mailbox16; - volatile uint16_t mailbox17; - volatile uint16_t mailbox18; - volatile uint16_t mailbox19; - volatile uint16_t mailbox20; - volatile uint16_t mailbox21; - volatile uint16_t mailbox22; - volatile uint16_t mailbox23; /* Also probe reg. */ + uint16_t unused_10[8]; /* Gap */ + uint16_t mailbox8; + uint16_t mailbox9; + uint16_t mailbox10; + uint16_t mailbox11; + uint16_t mailbox12; + uint16_t mailbox13; + uint16_t mailbox14; + uint16_t mailbox15; + uint16_t mailbox16; + uint16_t mailbox17; + uint16_t mailbox18; + uint16_t mailbox19; + uint16_t mailbox20; + uint16_t mailbox21; + uint16_t mailbox22; + uint16_t mailbox23; /* Also probe reg. */ } __attribute__((packed)) isp2200; } u_end; +}; + +typedef struct { + union { + struct device_reg_2xxx isp; + struct device_reg_24xx isp24; + }; } device_reg_t; #define ISP_REQ_Q_IN(ha, reg) \ @@ -504,6 +539,8 @@ typedef struct { #define MBS_LOOP_ID_USED 0x4008 #define MBS_ALL_IDS_IN_USE 0x4009 #define MBS_NOT_LOGGED_IN 0x400A +#define MBS_LINK_DOWN_ERROR 0x400B +#define MBS_DIAG_ECHO_TEST_ERROR 0x400C /* * ISP mailbox asynchronous event status codes @@ -555,7 +592,7 @@ typedef struct { #define FO1_CTIO_RETRY BIT_3 #define FO1_DISABLE_LIP_F7_SW BIT_4 #define FO1_DISABLE_100MS_LOS_WAIT BIT_5 -#define FO1_DISABLE_GPIO6_7 BIT_6 +#define FO1_DISABLE_GPIO6_7 BIT_6 /* LED bits */ #define FO1_AE_ON_LOOP_INIT_ERR BIT_7 #define FO1_SET_EMPHASIS_SWING BIT_8 #define FO1_AE_AUTO_BYPASS BIT_9 @@ -570,6 +607,15 @@ typedef struct { #define FO3_ENABLE_EMERG_IOCB BIT_0 #define FO3_AE_RND_ERROR BIT_1 +/* 24XX additional firmware options */ +#define ADD_FO_COUNT 3 +#define ADD_FO1_DISABLE_GPIO_LED_CTRL BIT_6 /* LED bits */ +#define ADD_FO1_ENABLE_PUREX_IOCB BIT_10 + +#define ADD_FO2_ENABLE_SEL_CLS2 BIT_5 + +#define ADD_FO3_NO_ABT_ON_LINK_DOWN BIT_14 + /* * ISP mailbox commands */ @@ -638,6 +684,22 @@ typedef struct { #define MBC_SEND_LFA_COMMAND 0x7D /* Send Loop Fabric Address */ #define MBC_LUN_RESET 0x7E /* Send LUN reset */ +/* + * ISP24xx mailbox commands + */ +#define MBC_SERDES_PARAMS 0x10 /* Serdes Tx Parameters. */ +#define MBC_GET_IOCB_STATUS 0x12 /* Get IOCB status command. */ +#define MBC_GET_TIMEOUT_PARAMS 0x22 /* Get FW timeouts. */ +#define MBC_GEN_SYSTEM_ERROR 0x2a /* Generate System Error. */ +#define MBC_SET_TIMEOUT_PARAMS 0x32 /* Set FW timeouts. */ +#define MBC_MID_INITIALIZE_FIRMWARE 0x48 /* MID Initialize firmware. */ +#define MBC_MID_GET_VP_DATABASE 0x49 /* MID Get VP Database. */ +#define MBC_MID_GET_VP_ENTRY 0x4a /* MID Get VP Entry. */ +#define MBC_HOST_MEMORY_COPY 0x53 /* Host Memory Copy. */ +#define MBC_SEND_RNFT_ELS 0x5e /* Send RNFT ELS request */ +#define MBC_GET_LINK_PRIV_STATS 0x6d /* Get link & private data. */ +#define MBC_SET_VENDOR_ID 0x76 /* Set Vendor ID. */ + /* Firmware return data sizes */ #define FCAL_MAP_SIZE 128 @@ -867,6 +929,9 @@ typedef struct { /* * Get Link Status mailbox command return buffer. */ +#define GLSO_SEND_RPS BIT_0 +#define GLSO_USE_DID BIT_3 + typedef struct { uint32_t link_fail_cnt; uint32_t loss_sync_cnt; @@ -1161,7 +1226,6 @@ do { \ * ISP queue - command entry structure definition. */ #define COMMAND_TYPE 0x11 /* Command entry */ -#define MAX_CMDSZ 16 /* SCSI maximum CDB size. */ typedef struct { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ @@ -1284,11 +1348,16 @@ typedef struct { /* * Status entry entry status */ +#define RF_RQ_DMA_ERROR BIT_6 /* Request Queue DMA error. */ #define RF_INV_E_ORDER BIT_5 /* Invalid entry order. */ #define RF_INV_E_COUNT BIT_4 /* Invalid entry count. */ #define RF_INV_E_PARAM BIT_3 /* Invalid entry parameter. */ #define RF_INV_E_TYPE BIT_2 /* Invalid entry type. */ #define RF_BUSY BIT_1 /* Busy */ +#define RF_MASK (RF_RQ_DMA_ERROR | RF_INV_E_ORDER | RF_INV_E_COUNT | \ + RF_INV_E_PARAM | RF_INV_E_TYPE | RF_BUSY) +#define RF_MASK_24XX (RF_INV_E_ORDER | RF_INV_E_COUNT | RF_INV_E_PARAM | \ + RF_INV_E_TYPE) /* * Status entry SCSI status bit definitions. @@ -1503,9 +1572,6 @@ typedef struct { port_id_t d_id; uint8_t node_name[WWN_SIZE]; uint8_t port_name[WWN_SIZE]; - uint32_t type; -#define SW_TYPE_IP BIT_1 -#define SW_TYPE_SCSI BIT_0 } sw_info_t; /* @@ -1520,6 +1586,8 @@ typedef struct { union { cmd_a64_entry_t cmd; sts_entry_t rsp; + struct cmd_type_7 cmd24; + struct sts_entry_24xx rsp24; } p; uint8_t inq[INQ_DATA_SIZE]; } inq_cmd_rsp_t; @@ -1555,10 +1623,13 @@ typedef struct { union { cmd_a64_entry_t cmd; sts_entry_t rsp; + struct cmd_type_7 cmd24; + struct sts_entry_24xx rsp24; } p; rpt_lun_lst_t list; } rpt_lun_cmd_rsp_t; + /* * Fibre channel port type. */ @@ -1646,6 +1717,7 @@ typedef struct fc_port { #define FCF_FAILOVER_DISABLE BIT_22 #define FCF_DSXXX_DEVICE BIT_23 #define FCF_AA_EVA_DEVICE BIT_24 +#define FCF_AA_MSA_DEVICE BIT_25 /* No loop ID flag. */ #define FC_NO_LOOP_ID 0x1000 @@ -1917,6 +1989,7 @@ struct qla_board_info { char isp_name[8]; struct qla_fw_info *fw_info; + char *fw_fname;; }; /* Return data from MBC_GET_ID_LIST call. */ @@ -1926,6 +1999,7 @@ struct gid_list_info { uint8_t domain; uint8_t loop_id_2100; /* ISP2100/ISP2200 -- 4 bytes. */ uint16_t loop_id; /* ISP23XX -- 6 bytes. */ + uint16_t reserved_1; /* ISP24XX -- 8 bytes. */ }; #define GID_LIST_SIZE (sizeof(struct gid_list_info) * MAX_FIBRE_DEVICES) @@ -2000,6 +2074,8 @@ typedef struct scsi_qla_host { uint32_t enable_lip_full_login :1; uint32_t enable_target_reset :1; uint32_t enable_led_scheme :1; + uint32_t msi_enabled :1; + uint32_t msix_enabled :1; } flags; atomic_t loop_state; @@ -2036,6 +2112,7 @@ typedef struct scsi_qla_host { #define IODESC_PROCESS_NEEDED 22 /* IO descriptor processing needed */ #define IOCTL_ERROR_RECOVERY 23 #define LOOP_RESET_NEEDED 24 +#define BEACON_BLINK_NEEDED 25 uint32_t device_flags; #define DFLG_LOCAL_DEVICES BIT_0 @@ -2119,6 +2196,7 @@ typedef struct scsi_qla_host { uint8_t serial2; /* NVRAM configuration data */ + uint16_t nvram_size; uint16_t nvram_base; uint16_t loop_reset_delay; @@ -2179,7 +2257,8 @@ typedef struct scsi_qla_host { struct dma_pool *s_dma_pool; dma_addr_t init_cb_dma; - init_cb_t *init_cb; + init_cb_t *init_cb; + int init_cb_size; dma_addr_t iodesc_pd_dma; port_database_t *iodesc_pd; @@ -2220,6 +2299,7 @@ typedef struct scsi_qla_host { uint16_t fw_options[16]; /* slots: 1,2,3,10,11 */ uint8_t fw_seriallink_options[4]; + uint16_t fw_seriallink_options24[4]; /* Firmware dump information. */ void *fw_dump; @@ -2228,8 +2308,12 @@ typedef struct scsi_qla_host { char *fw_dump_buffer; int fw_dump_buffer_len; + int fw_dumped; + void *fw_dump24; + int fw_dump24_len; + uint8_t host_str[16]; - uint16_t pci_attr; + uint32_t pci_attr; uint16_t product_id[4]; @@ -2237,8 +2321,8 @@ typedef struct scsi_qla_host { #define BINZERO "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" char *model_desc; - uint8_t node_name[WWN_SIZE]; - uint8_t nvram_version; + uint8_t *node_name; + uint8_t *port_name; uint32_t isp_abort_cnt; /* Needed for BEACON */ diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h new file mode 100644 index 000000000000..694d09f3a43b --- /dev/null +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -0,0 +1,1076 @@ + +/******************************************************************************** +* QLOGIC LINUX SOFTWARE +* +* QLogic ISP2x00 device driver for Linux 2.6.x +* Copyright (C) 2003-2004 QLogic Corporation +* (www.qlogic.com) +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2, or (at your option) any +* later version. +* +* This program is distributed in the hope that it will be useful, but +* WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* General Public License for more details. +** +******************************************************************************/ + +#ifndef __QLA_FW_H +#define __QLA_FW_H + +// ISP24xx + +#define RISC_SADDRESS 0x100000 +#define MBS_CHECKSUM_ERROR 0x4010 + +/* + * Firmware Options. + */ +#define FO1_ENABLE_PUREX BIT_10 +#define FO1_DISABLE_LED_CTRL BIT_6 +#define FO2_ENABLE_SEL_CLASS2 BIT_5 +#define FO3_NO_ABTS_ON_LINKDOWN BIT_14 + +/* + * Port Database structure definition for ISP 24xx. + */ +#define PDO_FORCE_ADISC BIT_1 +#define PDO_FORCE_PLOGI BIT_0 + + +#define PORT_DATABASE_24XX_SIZE 64 +struct port_database_24xx { + uint16_t flags; +#define PDF_TASK_RETRY_ID BIT_14 +#define PDF_FC_TAPE BIT_7 +#define PDF_ACK0_CAPABLE BIT_6 +#define PDF_FCP2_CONF BIT_5 +#define PDF_CLASS_2 BIT_4 +#define PDF_HARD_ADDR BIT_1 + + uint8_t current_login_state; + uint8_t last_login_state; +#define PDS_PLOGI_PENDING 0x03 +#define PDS_PLOGI_COMPLETE 0x04 +#define PDS_PRLI_PENDING 0x05 +#define PDS_PRLI_COMPLETE 0x06 +#define PDS_PORT_UNAVAILABLE 0x07 +#define PDS_PRLO_PENDING 0x09 +#define PDS_LOGO_PENDING 0x11 +//FIXME +#define PDS_PRLI2_PENDING 0x12 + + uint8_t hard_address[3]; + uint8_t reserved_1; + + uint8_t port_id[3]; + uint8_t sequence_id; + + uint16_t port_timer; + + uint16_t nport_handle; /* N_PORT handle. */ + + uint16_t receive_data_size; + uint16_t reserved_2; + + uint8_t prli_svc_param_word_0[2]; /* Big endian */ + /* Bits 15-0 of word 0 */ + uint8_t prli_svc_param_word_3[2]; /* Big endian */ + /* Bits 15-0 of word 3 */ + + uint8_t port_name[WWN_SIZE]; + uint8_t node_name[WWN_SIZE]; + + uint8_t reserved_3[24]; +}; + +struct nvram_24xx { + /* NVRAM header. */ + uint8_t id[4]; + uint16_t nvram_version; + uint16_t reserved_0; + + /* Firmware Initialization Control Block. */ + uint16_t version; + uint16_t reserved_1; + uint16_t frame_payload_size; + uint16_t execution_throttle; + uint16_t exchange_count; + uint16_t hard_address; + + uint8_t port_name[WWN_SIZE]; + uint8_t node_name[WWN_SIZE]; + + uint16_t login_retry_count; + uint16_t link_down_on_nos; + uint16_t interrupt_delay_timer; + uint16_t login_timeout; + + uint32_t firmware_options_1; + uint32_t firmware_options_2; + uint32_t firmware_options_3; + + /* Offset 56. */ + + /* + * BIT 0 = Control Enable + * BIT 1-15 = + * + * BIT 0-7 = Reserved + * BIT 8-10 = Output Swing 1G + * BIT 11-13 = Output Emphasis 1G + * BIT 14-15 = Reserved + * + * BIT 0-7 = Reserved + * BIT 8-10 = Output Swing 2G + * BIT 11-13 = Output Emphasis 2G + * BIT 14-15 = Reserved + * + * BIT 0-7 = Reserved + * BIT 8-10 = Output Swing 4G + * BIT 11-13 = Output Emphasis 4G + * BIT 14-15 = Reserved + */ + uint16_t seriallink_options[4]; + + uint16_t reserved_2[16]; + + /* Offset 96. */ + uint16_t reserved_3[16]; + + /* PCIe table entries. */ + uint16_t reserved_4[16]; + + /* Offset 160. */ + uint16_t reserved_5[16]; + + /* Offset 192. */ + uint16_t reserved_6[16]; + + /* Offset 224. */ + uint16_t reserved_7[16]; + + /* + * BIT 0 = Enable spinup delay + * BIT 1 = Disable BIOS + * BIT 2 = Enable Memory Map BIOS + * BIT 3 = Enable Selectable Boot + * BIT 4 = Disable RISC code load + * BIT 5 = + * BIT 6 = + * BIT 7 = + * + * BIT 8 = + * BIT 9 = + * BIT 10 = Enable lip full login + * BIT 11 = Enable target reset + * BIT 12 = + * BIT 13 = + * BIT 14 = + * BIT 15 = Enable alternate WWN + * + * BIT 16-31 = + */ + uint32_t host_p; + + uint8_t alternate_port_name[WWN_SIZE]; + uint8_t alternate_node_name[WWN_SIZE]; + + uint8_t boot_port_name[WWN_SIZE]; + uint16_t boot_lun_number; + uint16_t reserved_8; + + uint8_t alt1_boot_port_name[WWN_SIZE]; + uint16_t alt1_boot_lun_number; + uint16_t reserved_9; + + uint8_t alt2_boot_port_name[WWN_SIZE]; + uint16_t alt2_boot_lun_number; + uint16_t reserved_10; + + uint8_t alt3_boot_port_name[WWN_SIZE]; + uint16_t alt3_boot_lun_number; + uint16_t reserved_11; + + /* + * BIT 0 = Selective Login + * BIT 1 = Alt-Boot Enable + * BIT 2 = Reserved + * BIT 3 = Boot Order List + * BIT 4 = Reserved + * BIT 5 = Selective LUN + * BIT 6 = Reserved + * BIT 7-31 = + */ + uint32_t efi_parameters; + + uint8_t reset_delay; + uint8_t reserved_12; + uint16_t reserved_13; + + uint16_t boot_id_number; + uint16_t reserved_14; + + uint16_t max_luns_per_target; + uint16_t reserved_15; + + uint16_t port_down_retry_count; + uint16_t link_down_timeout; + + /* FCode parameters. */ + uint16_t fcode_parameter; + + uint16_t reserved_16[3]; + + /* Offset 352. */ + uint8_t prev_drv_ver_major; + uint8_t prev_drv_ver_submajob; + uint8_t prev_drv_ver_minor; + uint8_t prev_drv_ver_subminor; + + uint16_t prev_bios_ver_major; + uint16_t prev_bios_ver_minor; + + uint16_t prev_efi_ver_major; + uint16_t prev_efi_ver_minor; + + uint16_t prev_fw_ver_major; + uint8_t prev_fw_ver_minor; + uint8_t prev_fw_ver_subminor; + + uint16_t reserved_17[8]; + + /* Offset 384. */ + uint16_t reserved_18[16]; + + /* Offset 416. */ + uint16_t reserved_19[16]; + + /* Offset 448. */ + uint16_t reserved_20[16]; + + /* Offset 480. */ + uint8_t model_name[16]; + + uint16_t reserved_21[2]; + + /* Offset 500. */ + /* HW Parameter Block. */ + uint16_t pcie_table_sig; + uint16_t pcie_table_offset; + + uint16_t subsystem_vendor_id; + uint16_t subsystem_device_id; + + uint32_t checksum; +}; + +/* + * ISP Initialization Control Block. + * Little endian except where noted. + */ +#define ICB_VERSION 1 +struct init_cb_24xx { + uint16_t version; + uint16_t reserved_1; + + uint16_t frame_payload_size; + uint16_t execution_throttle; + uint16_t exchange_count; + + uint16_t hard_address; + + uint8_t port_name[WWN_SIZE]; /* Big endian. */ + uint8_t node_name[WWN_SIZE]; /* Big endian. */ + + uint16_t response_q_inpointer; + uint16_t request_q_outpointer; + + uint16_t login_retry_count; + + uint16_t prio_request_q_outpointer; + + uint16_t response_q_length; + uint16_t request_q_length; + + uint16_t link_down_timeout; /* Milliseconds. */ + + uint16_t prio_request_q_length; + + uint32_t request_q_address[2]; + uint32_t response_q_address[2]; + uint32_t prio_request_q_address[2]; + + uint8_t reserved_2[8]; + + uint16_t atio_q_inpointer; + uint16_t atio_q_length; + uint32_t atio_q_address[2]; + + uint16_t interrupt_delay_timer; /* 100us increments. */ + uint16_t login_timeout; + + /* + * BIT 0 = Enable Hard Loop Id + * BIT 1 = Enable Fairness + * BIT 2 = Enable Full-Duplex + * BIT 3 = Reserved + * BIT 4 = Enable Target Mode + * BIT 5 = Disable Initiator Mode + * BIT 6 = Reserved + * BIT 7 = Reserved + * + * BIT 8 = Reserved + * BIT 9 = Non Participating LIP + * BIT 10 = Descending Loop ID Search + * BIT 11 = Acquire Loop ID in LIPA + * BIT 12 = Reserved + * BIT 13 = Full Login after LIP + * BIT 14 = Node Name Option + * BIT 15-31 = Reserved + */ + uint32_t firmware_options_1; + + /* + * BIT 0 = Operation Mode bit 0 + * BIT 1 = Operation Mode bit 1 + * BIT 2 = Operation Mode bit 2 + * BIT 3 = Operation Mode bit 3 + * BIT 4 = Connection Options bit 0 + * BIT 5 = Connection Options bit 1 + * BIT 6 = Connection Options bit 2 + * BIT 7 = Enable Non part on LIHA failure + * + * BIT 8 = Enable Class 2 + * BIT 9 = Enable ACK0 + * BIT 10 = Reserved + * BIT 11 = Enable FC-SP Security + * BIT 12 = FC Tape Enable + * BIT 13-31 = Reserved + */ + uint32_t firmware_options_2; + + /* + * BIT 0 = Reserved + * BIT 1 = Soft ID only + * BIT 2 = Reserved + * BIT 3 = Reserved + * BIT 4 = FCP RSP Payload bit 0 + * BIT 5 = FCP RSP Payload bit 1 + * BIT 6 = Enable Receive Out-of-Order data frame handling + * BIT 7 = Disable Automatic PLOGI on Local Loop + * + * BIT 8 = Reserved + * BIT 9 = Enable Out-of-Order FCP_XFER_RDY relative offset handling + * BIT 10 = Reserved + * BIT 11 = Reserved + * BIT 12 = Reserved + * BIT 13 = Data Rate bit 0 + * BIT 14 = Data Rate bit 1 + * BIT 15 = Data Rate bit 2 + * BIT 16-31 = Reserved + */ + uint32_t firmware_options_3; + + uint8_t reserved_3[24]; +}; + +/* + * ISP queue - command entry structure definition. + */ +#define COMMAND_TYPE_6 0x48 /* Command Type 6 entry */ +struct cmd_type_6 { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + uint16_t nport_handle; /* N_PORT handle. */ + uint16_t timeout; /* Command timeout. */ + + uint16_t dseg_count; /* Data segment count. */ + + uint16_t fcp_rsp_dsd_len; /* FCP_RSP DSD length. */ + + uint8_t lun[8]; /* FCP LUN (BE). */ + + uint16_t control_flags; /* Control flags. */ +#define CF_DATA_SEG_DESCR_ENABLE BIT_2 +#define CF_READ_DATA BIT_1 +#define CF_WRITE_DATA BIT_0 + + uint16_t fcp_cmnd_dseg_len; /* Data segment length. */ + uint32_t fcp_cmnd_dseg_address[2]; /* Data segment address. */ + + uint32_t fcp_rsp_dseg_address[2]; /* Data segment address. */ + + uint32_t byte_count; /* Total byte count. */ + + uint8_t port_id[3]; /* PortID of destination port. */ + uint8_t vp_index; + + uint32_t fcp_data_dseg_address[2]; /* Data segment address. */ + uint16_t fcp_data_dseg_len; /* Data segment length. */ + uint16_t reserved_1; /* MUST be set to 0. */ +}; + +#define COMMAND_TYPE_7 0x18 /* Command Type 7 entry */ +struct cmd_type_7 { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + uint16_t nport_handle; /* N_PORT handle. */ + uint16_t timeout; /* Command timeout. */ +#define FW_MAX_TIMEOUT 0x1999 + + uint16_t dseg_count; /* Data segment count. */ + uint16_t reserved_1; + + uint8_t lun[8]; /* FCP LUN (BE). */ + + uint16_t task_mgmt_flags; /* Task management flags. */ +#define TMF_CLEAR_ACA BIT_14 +#define TMF_TARGET_RESET BIT_13 +#define TMF_LUN_RESET BIT_12 +#define TMF_CLEAR_TASK_SET BIT_10 +#define TMF_ABORT_TASK_SET BIT_9 +#define TMF_READ_DATA BIT_1 +#define TMF_WRITE_DATA BIT_0 + + uint8_t task; +#define TSK_SIMPLE 0 +#define TSK_HEAD_OF_QUEUE 1 +#define TSK_ORDERED 2 +#define TSK_ACA 4 +#define TSK_UNTAGGED 5 + + uint8_t crn; + + uint8_t fcp_cdb[MAX_CMDSZ]; /* SCSI command words. */ + uint32_t byte_count; /* Total byte count. */ + + uint8_t port_id[3]; /* PortID of destination port. */ + uint8_t vp_index; + + uint32_t dseg_0_address[2]; /* Data segment 0 address. */ + uint32_t dseg_0_len; /* Data segment 0 length. */ +}; + +/* + * ISP queue - status entry structure definition. + */ +#define STATUS_TYPE 0x03 /* Status entry. */ +struct sts_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + uint16_t comp_status; /* Completion status. */ + uint16_t ox_id; /* OX_ID used by the firmware. */ + + uint32_t residual_len; /* Residual transfer length. */ + + uint16_t reserved_1; + uint16_t state_flags; /* State flags. */ +#define SF_TRANSFERRED_DATA BIT_11 +#define SF_FCP_RSP_DMA BIT_0 + + uint16_t reserved_2; + uint16_t scsi_status; /* SCSI status. */ +#define SS_CONFIRMATION_REQ BIT_12 + + uint32_t rsp_residual_count; /* FCP RSP residual count. */ + + uint32_t sense_len; /* FCP SENSE length. */ + uint32_t rsp_data_len; /* FCP response data length. */ + + uint8_t data[28]; /* FCP response/sense information. */ +}; + +/* + * Status entry completion status + */ +#define CS_DATA_REASSEMBLY_ERROR 0x11 /* Data Reassembly Error.. */ +#define CS_ABTS_BY_TARGET 0x13 /* Target send ABTS to abort IOCB. */ +#define CS_FW_RESOURCE 0x2C /* Firmware Resource Unavailable. */ +#define CS_TASK_MGMT_OVERRUN 0x30 /* Task management overrun (8+). */ +#define CS_ABORT_BY_TARGET 0x47 /* Abort By Target. */ + +/* + * ISP queue - marker entry structure definition. + */ +#define MARKER_TYPE 0x04 /* Marker entry. */ +struct mrk_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t handle_count; /* Handle count. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + uint16_t nport_handle; /* N_PORT handle. */ + + uint8_t modifier; /* Modifier (7-0). */ +#define MK_SYNC_ID_LUN 0 /* Synchronize ID/LUN */ +#define MK_SYNC_ID 1 /* Synchronize ID */ +#define MK_SYNC_ALL 2 /* Synchronize all ID/LUN */ + uint8_t reserved_1; + + uint8_t reserved_2; + uint8_t vp_index; + + uint16_t reserved_3; + + uint8_t lun[8]; /* FCP LUN (BE). */ + uint8_t reserved_4[40]; +}; + +/* + * ISP queue - CT Pass-Through entry structure definition. + */ +#define CT_IOCB_TYPE 0x29 /* CT Pass-Through IOCB entry */ +struct ct_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System Defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + uint16_t comp_status; /* Completion status. */ + + uint16_t nport_handle; /* N_PORT handle. */ + + uint16_t cmd_dsd_count; + + uint8_t vp_index; + uint8_t reserved_1; + + uint16_t timeout; /* Command timeout. */ + uint16_t reserved_2; + + uint16_t rsp_dsd_count; + + uint8_t reserved_3[10]; + + uint32_t rsp_byte_count; + uint32_t cmd_byte_count; + + uint32_t dseg_0_address[2]; /* Data segment 0 address. */ + uint32_t dseg_0_len; /* Data segment 0 length. */ + uint32_t dseg_1_address[2]; /* Data segment 1 address. */ + uint32_t dseg_1_len; /* Data segment 1 length. */ +}; + +/* + * ISP queue - ELS Pass-Through entry structure definition. + */ +#define ELS_IOCB_TYPE 0x53 /* ELS Pass-Through IOCB entry */ +struct els_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System Defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + uint16_t reserved_1; + + uint16_t nport_handle; /* N_PORT handle. */ + + uint16_t tx_dsd_count; + + uint8_t vp_index; + uint8_t sof_type; +#define EST_SOFI3 (1 << 4) +#define EST_SOFI2 (3 << 4) + + uint32_t rx_xchg_address[2]; /* Receive exchange address. */ + uint16_t rx_dsd_count; + + uint8_t opcode; + uint8_t reserved_2; + + uint8_t port_id[3]; + uint8_t reserved_3; + + uint16_t reserved_4; + + uint16_t control_flags; /* Control flags. */ +#define ECF_PAYLOAD_DESCR_MASK (BIT_15|BIT_14|BIT_13) +#define EPD_ELS_COMMAND (0 << 13) +#define EPD_ELS_ACC (1 << 13) +#define EPD_ELS_RJT (2 << 13) +#define EPD_RX_XCHG (3 << 13) +#define ECF_CLR_PASSTHRU_PEND BIT_12 +#define ECF_INCL_FRAME_HDR BIT_11 + + uint32_t rx_byte_count; + uint32_t tx_byte_count; + + uint32_t tx_address[2]; /* Data segment 0 address. */ + uint32_t tx_len; /* Data segment 0 length. */ + uint32_t rx_address[2]; /* Data segment 1 address. */ + uint32_t rx_len; /* Data segment 1 length. */ +}; + +/* + * ISP queue - Mailbox Command entry structure definition. + */ +#define MBX_IOCB_TYPE 0x39 +struct mbx_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t handle_count; /* Handle count. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + uint16_t mbx[28]; +}; + + +#define LOGINOUT_PORT_IOCB_TYPE 0x52 /* Login/Logout Port entry. */ +struct logio_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + uint16_t comp_status; /* Completion status. */ +#define CS_LOGIO_ERROR 0x31 /* Login/Logout IOCB error. */ + + uint16_t nport_handle; /* N_PORT handle. */ + + uint16_t control_flags; /* Control flags. */ + /* Modifiers. */ +#define LCF_FCP2_OVERRIDE BIT_9 /* Set/Reset word 3 of PRLI. */ +#define LCF_CLASS_2 BIT_8 /* Enable class 2 during PLOGI. */ +#define LCF_FREE_NPORT BIT_7 /* Release NPORT handle after LOGO. */ +#define LCF_EXPL_LOGO BIT_6 /* Perform an explicit LOGO. */ +#define LCF_SKIP_PRLI BIT_5 /* Skip PRLI after PLOGI. */ +#define LCF_IMPL_LOGO_ALL BIT_5 /* Implicit LOGO to all ports. */ +#define LCF_COND_PLOGI BIT_4 /* PLOGI only if not logged-in. */ +#define LCF_IMPL_LOGO BIT_4 /* Perform an implicit LOGO. */ +#define LCF_IMPL_PRLO BIT_4 /* Perform an implicit PRLO. */ + /* Commands. */ +#define LCF_COMMAND_PLOGI 0x00 /* PLOGI. */ +#define LCF_COMMAND_PRLI 0x01 /* PRLI. */ +#define LCF_COMMAND_PDISC 0x02 /* PDISC. */ +#define LCF_COMMAND_ADISC 0x03 /* ADISC. */ +#define LCF_COMMAND_LOGO 0x08 /* LOGO. */ +#define LCF_COMMAND_PRLO 0x09 /* PRLO. */ +#define LCF_COMMAND_TPRLO 0x0A /* TPRLO. */ + + uint8_t vp_index; + uint8_t reserved_1; + + uint8_t port_id[3]; /* PortID of destination port. */ + + uint8_t rsp_size; /* Response size in 32bit words. */ + + uint32_t io_parameter[11]; /* General I/O parameters. */ +#define LSC_SCODE_NOLINK 0x01 +#define LSC_SCODE_NOIOCB 0x02 +#define LSC_SCODE_NOXCB 0x03 +#define LSC_SCODE_CMD_FAILED 0x04 +#define LSC_SCODE_NOFABRIC 0x05 +#define LSC_SCODE_FW_NOT_READY 0x07 +#define LSC_SCODE_NOT_LOGGED_IN 0x09 +#define LSC_SCODE_NOPCB 0x0A + +#define LSC_SCODE_ELS_REJECT 0x18 +#define LSC_SCODE_CMD_PARAM_ERR 0x19 +#define LSC_SCODE_PORTID_USED 0x1A +#define LSC_SCODE_NPORT_USED 0x1B +#define LSC_SCODE_NONPORT 0x1C +#define LSC_SCODE_LOGGED_IN 0x1D +#define LSC_SCODE_NOFLOGI_ACC 0x1F +}; + +#define TSK_MGMT_IOCB_TYPE 0x14 +struct tsk_mgmt_entry { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t handle_count; /* Handle count. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + uint16_t nport_handle; /* N_PORT handle. */ + + uint16_t reserved_1; + + uint16_t delay; /* Activity delay in seconds. */ + + uint16_t timeout; /* Command timeout. */ + + uint8_t lun[8]; /* FCP LUN (BE). */ + + uint32_t control_flags; /* Control Flags. */ +#define TCF_NOTMCMD_TO_TARGET BIT_31 +#define TCF_LUN_RESET BIT_4 +#define TCF_ABORT_TASK_SET BIT_3 +#define TCF_CLEAR_TASK_SET BIT_2 +#define TCF_TARGET_RESET BIT_1 +#define TCF_CLEAR_ACA BIT_0 + + uint8_t reserved_2[20]; + + uint8_t port_id[3]; /* PortID of destination port. */ + uint8_t vp_index; + + uint8_t reserved_3[12]; +}; + +#define ABORT_IOCB_TYPE 0x33 +struct abort_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t handle_count; /* Handle count. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + uint16_t nport_handle; /* N_PORT handle. */ + /* or Completion status. */ + + uint16_t options; /* Options. */ +#define AOF_NO_ABTS BIT_0 /* Do not send any ABTS. */ + + uint32_t handle_to_abort; /* System handle to abort. */ + + uint8_t reserved_1[32]; + + uint8_t port_id[3]; /* PortID of destination port. */ + uint8_t vp_index; + + uint8_t reserved_2[12]; +}; + +/* + * ISP I/O Register Set structure definitions. + */ +struct device_reg_24xx { + uint32_t flash_addr; /* Flash/NVRAM BIOS address. */ +#define FARX_DATA_FLAG BIT_31 +#define FARX_ACCESS_FLASH_CONF 0x7FFD0000 +#define FARX_ACCESS_FLASH_DATA 0x7FF00000 +#define FARX_ACCESS_NVRAM_CONF 0x7FFF0000 +#define FARX_ACCESS_NVRAM_DATA 0x7FFE0000 + +#define FA_NVRAM_FUNC0_ADDR 0x80 +#define FA_NVRAM_FUNC1_ADDR 0x180 + +#define FA_NVRAM_VPD_SIZE 0x80 +#define FA_NVRAM_VPD0_ADDR 0x00 +#define FA_NVRAM_VPD1_ADDR 0x100 + /* + * RISC code begins at offset 512KB + * within flash. Consisting of two + * contiguous RISC code segments. + */ +#define FA_RISC_CODE_ADDR 0x20000 +#define FA_RISC_CODE_SEGMENTS 2 + + uint32_t flash_data; /* Flash/NVRAM BIOS data. */ + + uint32_t ctrl_status; /* Control/Status. */ +#define CSRX_FLASH_ACCESS_ERROR BIT_18 /* Flash/NVRAM Access Error. */ +#define CSRX_DMA_ACTIVE BIT_17 /* DMA Active status. */ +#define CSRX_DMA_SHUTDOWN BIT_16 /* DMA Shutdown control status. */ +#define CSRX_FUNCTION BIT_15 /* Function number. */ + /* PCI-X Bus Mode. */ +#define CSRX_PCIX_BUS_MODE_MASK (BIT_11|BIT_10|BIT_9|BIT_8) +#define PBM_PCI_33MHZ (0 << 8) +#define PBM_PCIX_M1_66MHZ (1 << 8) +#define PBM_PCIX_M1_100MHZ (2 << 8) +#define PBM_PCIX_M1_133MHZ (3 << 8) +#define PBM_PCIX_M2_66MHZ (5 << 8) +#define PBM_PCIX_M2_100MHZ (6 << 8) +#define PBM_PCIX_M2_133MHZ (7 << 8) +#define PBM_PCI_66MHZ (8 << 8) + /* Max Write Burst byte count. */ +#define CSRX_MAX_WRT_BURST_MASK (BIT_5|BIT_4) +#define MWB_512_BYTES (0 << 4) +#define MWB_1024_BYTES (1 << 4) +#define MWB_2048_BYTES (2 << 4) +#define MWB_4096_BYTES (3 << 4) + +#define CSRX_64BIT_SLOT BIT_2 /* PCI 64-Bit Bus Slot. */ +#define CSRX_FLASH_ENABLE BIT_1 /* Flash BIOS Read/Write enable. */ +#define CSRX_ISP_SOFT_RESET BIT_0 /* ISP soft reset. */ + + uint32_t ictrl; /* Interrupt control. */ +#define ICRX_EN_RISC_INT BIT_3 /* Enable RISC interrupts on PCI. */ + + uint32_t istatus; /* Interrupt status. */ +#define ISRX_RISC_INT BIT_3 /* RISC interrupt. */ + + uint32_t unused_1[2]; /* Gap. */ + + /* Request Queue. */ + uint32_t req_q_in; /* In-Pointer. */ + uint32_t req_q_out; /* Out-Pointer. */ + /* Response Queue. */ + uint32_t rsp_q_in; /* In-Pointer. */ + uint32_t rsp_q_out; /* Out-Pointer. */ + /* Priority Request Queue. */ + uint32_t preq_q_in; /* In-Pointer. */ + uint32_t preq_q_out; /* Out-Pointer. */ + + uint32_t unused_2[2]; /* Gap. */ + + /* ATIO Queue. */ + uint32_t atio_q_in; /* In-Pointer. */ + uint32_t atio_q_out; /* Out-Pointer. */ + + uint32_t host_status; +#define HSRX_RISC_INT BIT_15 /* RISC to Host interrupt. */ +#define HSRX_RISC_PAUSED BIT_8 /* RISC Paused. */ + + uint32_t hccr; /* Host command & control register. */ + /* HCCR statuses. */ +#define HCCRX_HOST_INT BIT_6 /* Host to RISC interrupt bit. */ +#define HCCRX_RISC_RESET BIT_5 /* RISC Reset mode bit. */ +#define HCCRX_RISC_PAUSE BIT_4 /* RISC Pause mode bit. */ + /* HCCR commands. */ + /* NOOP. */ +#define HCCRX_NOOP 0x00000000 + /* Set RISC Reset. */ +#define HCCRX_SET_RISC_RESET 0x10000000 + /* Clear RISC Reset. */ +#define HCCRX_CLR_RISC_RESET 0x20000000 + /* Set RISC Pause. */ +#define HCCRX_SET_RISC_PAUSE 0x30000000 + /* Releases RISC Pause. */ +#define HCCRX_REL_RISC_PAUSE 0x40000000 + /* Set HOST to RISC interrupt. */ +#define HCCRX_SET_HOST_INT 0x50000000 + /* Clear HOST to RISC interrupt. */ +#define HCCRX_CLR_HOST_INT 0x60000000 + /* Clear RISC to PCI interrupt. */ +#define HCCRX_CLR_RISC_INT 0xA0000000 + + uint32_t gpiod; /* GPIO Data register. */ + /* LED update mask. */ +#define GPDX_LED_UPDATE_MASK (BIT_20|BIT_19|BIT_18) + /* Data update mask. */ +#define GPDX_DATA_UPDATE_MASK (BIT_17|BIT_16) + /* LED control mask. */ +#define GPDX_LED_COLOR_MASK (BIT_4|BIT_3|BIT_2) + /* LED bit values. Color names as + * referenced in fw spec. + */ +#define GPDX_LED_YELLOW_ON BIT_2 +#define GPDX_LED_GREEN_ON BIT_3 +#define GPDX_LED_AMBER_ON BIT_4 + /* Data in/out. */ +#define GPDX_DATA_INOUT (BIT_1|BIT_0) + + uint32_t gpioe; /* GPIO Enable register. */ + /* Enable update mask. */ +#define GPEX_ENABLE_UPDATE_MASK (BIT_17|BIT_16) + /* Enable. */ +#define GPEX_ENABLE (BIT_1|BIT_0) + + uint32_t iobase_addr; /* I/O Bus Base Address register. */ + + uint32_t unused_3[10]; /* Gap. */ + + uint16_t mailbox0; + uint16_t mailbox1; + uint16_t mailbox2; + uint16_t mailbox3; + uint16_t mailbox4; + uint16_t mailbox5; + uint16_t mailbox6; + uint16_t mailbox7; + uint16_t mailbox8; + uint16_t mailbox9; + uint16_t mailbox10; + uint16_t mailbox11; + uint16_t mailbox12; + uint16_t mailbox13; + uint16_t mailbox14; + uint16_t mailbox15; + uint16_t mailbox16; + uint16_t mailbox17; + uint16_t mailbox18; + uint16_t mailbox19; + uint16_t mailbox20; + uint16_t mailbox21; + uint16_t mailbox22; + uint16_t mailbox23; + uint16_t mailbox24; + uint16_t mailbox25; + uint16_t mailbox26; + uint16_t mailbox27; + uint16_t mailbox28; + uint16_t mailbox29; + uint16_t mailbox30; + uint16_t mailbox31; +}; + +/* MID Support ***************************************************************/ + +#define MAX_MID_VPS 125 + +struct mid_conf_entry_24xx { + uint16_t reserved_1; + + /* + * BIT 0 = Enable Hard Loop Id + * BIT 1 = Acquire Loop ID in LIPA + * BIT 2 = ID not Acquired + * BIT 3 = Enable VP + * BIT 4 = Enable Initiator Mode + * BIT 5 = Disable Target Mode + * BIT 6-7 = Reserved + */ + uint8_t options; + + uint8_t hard_address; + + uint8_t port_name[WWN_SIZE]; + uint8_t node_name[WWN_SIZE]; +}; + +struct mid_init_cb_24xx { + struct init_cb_24xx init_cb; + + uint16_t count; + uint16_t options; + + struct mid_conf_entry_24xx entries[MAX_MID_VPS]; +}; + + +struct mid_db_entry_24xx { + uint16_t status; +#define MDBS_NON_PARTIC BIT_3 +#define MDBS_ID_ACQUIRED BIT_1 +#define MDBS_ENABLED BIT_0 + + uint8_t options; + uint8_t hard_address; + + uint8_t port_name[WWN_SIZE]; + uint8_t node_name[WWN_SIZE]; + + uint8_t port_id[3]; + uint8_t reserved_1; +}; + +struct mid_db_24xx { + struct mid_db_entry_24xx entries[MAX_MID_VPS]; +}; + +#define VP_CTRL_IOCB_TYPE 0x30 /* Vitual Port Control entry. */ +struct vp_ctrl_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + uint16_t vp_idx_failed; + + uint16_t comp_status; /* Completion status. */ +#define CS_VCE_ACQ_ID_ERROR 0x02 /* Error while acquireing ID. */ +#define CS_VCE_BUSY 0x05 /* Firmware not ready to accept cmd. */ + + uint16_t command; +#define VCE_COMMAND_ENABLE_VPS 0x00 /* Enable VPs. */ +#define VCE_COMMAND_DISABLE_VPS 0x08 /* Disable VPs. */ +#define VCE_COMMAND_DISABLE_VPS_REINIT 0x09 /* Disable VPs and reinit link. */ +#define VCE_COMMAND_DISABLE_VPS_LOGO 0x0a /* Disable VPs and LOGO ports. */ + + uint16_t vp_count; + + uint8_t vp_idx_map[16]; + + uint8_t reserved_4[32]; +}; + +#define VP_CONFIG_IOCB_TYPE 0x31 /* Vitual Port Config entry. */ +struct vp_config_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + uint16_t reserved_1; + + uint16_t comp_status; /* Completion status. */ +#define CS_VCT_STS_ERROR 0x01 /* Specified VPs were not disabled. */ +#define CS_VCT_CNT_ERROR 0x02 /* Invalid VP count. */ +#define CS_VCT_ERROR 0x03 /* Unknown error. */ +#define CS_VCT_IDX_ERROR 0x02 /* Invalid VP index. */ +#define CS_VCT_BUSY 0x05 /* Firmware not ready to accept cmd. */ + + uint8_t command; +#define VCT_COMMAND_MOD_VPS 0x00 /* Enable VPs. */ +#define VCT_COMMAND_MOD_ENABLE_VPS 0x08 /* Disable VPs. */ + + uint8_t vp_count; + + uint8_t vp_idx1; + uint8_t vp_idx2; + + uint8_t options_idx1; + uint8_t hard_address_idx1; + uint16_t reserved_2; + uint8_t port_name_idx1[WWN_SIZE]; + uint8_t node_name_idx1[WWN_SIZE]; + + uint8_t options_idx2; + uint8_t hard_address_idx2; + uint16_t reserved_3; + uint8_t port_name_idx2[WWN_SIZE]; + uint8_t node_name_idx2[WWN_SIZE]; + + uint8_t reserved_4[8]; +}; + +#define VP_RPT_ID_IOCB_TYPE 0x32 /* Report ID Acquisition entry. */ +struct vp_rpt_id_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + uint16_t vp_count; /* Format 0 -- | VP setup | VP acq |. */ + /* Format 1 -- | VP count |. */ + uint16_t vp_idx; /* Format 0 -- Reserved. */ + /* Format 1 -- VP status and index. */ + + uint8_t port_id[3]; + uint8_t format; + + uint8_t vp_idx_map[16]; + + uint8_t reserved_4[32]; +}; + +/* END MID Support ***********************************************************/ +#endif diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 27b7f9259f28..226bec05d4d1 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -195,6 +195,7 @@ qla2100_pci_config(scsi_qla_host_t *ha) { uint16_t w, mwi; unsigned long flags; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; qla_printk(KERN_INFO, ha, "Configuring PCI space...\n"); @@ -215,7 +216,7 @@ qla2100_pci_config(scsi_qla_host_t *ha) /* Get PCI bus information. */ spin_lock_irqsave(&ha->hardware_lock, flags); - ha->pci_attr = RD_REG_WORD(&ha->iobase->ctrl_status); + ha->pci_attr = RD_REG_WORD(®->ctrl_status); spin_unlock_irqrestore(&ha->hardware_lock, flags); return QLA_SUCCESS; @@ -233,6 +234,7 @@ qla2300_pci_config(scsi_qla_host_t *ha) uint16_t w, mwi; unsigned long flags = 0; uint32_t cnt; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; qla_printk(KERN_INFO, ha, "Configuring PCI space...\n"); @@ -259,34 +261,32 @@ qla2300_pci_config(scsi_qla_host_t *ha) spin_lock_irqsave(&ha->hardware_lock, flags); /* Pause RISC. */ - WRT_REG_WORD(&ha->iobase->hccr, HCCR_PAUSE_RISC); + WRT_REG_WORD(®->hccr, HCCR_PAUSE_RISC); for (cnt = 0; cnt < 30000; cnt++) { - if ((RD_REG_WORD(&ha->iobase->hccr) & - HCCR_RISC_PAUSE) != 0) + if ((RD_REG_WORD(®->hccr) & HCCR_RISC_PAUSE) != 0) break; udelay(10); } /* Select FPM registers. */ - WRT_REG_WORD(&ha->iobase->ctrl_status, 0x20); - RD_REG_WORD(&ha->iobase->ctrl_status); + WRT_REG_WORD(®->ctrl_status, 0x20); + RD_REG_WORD(®->ctrl_status); /* Get the fb rev level */ - ha->fb_rev = RD_FB_CMD_REG(ha, ha->iobase); + ha->fb_rev = RD_FB_CMD_REG(ha, reg); if (ha->fb_rev == FPM_2300) w &= ~PCI_COMMAND_INVALIDATE; /* Deselect FPM registers. */ - WRT_REG_WORD(&ha->iobase->ctrl_status, 0x0); - RD_REG_WORD(&ha->iobase->ctrl_status); + WRT_REG_WORD(®->ctrl_status, 0x0); + RD_REG_WORD(®->ctrl_status); /* Release RISC module. */ - WRT_REG_WORD(&ha->iobase->hccr, HCCR_RELEASE_RISC); + WRT_REG_WORD(®->hccr, HCCR_RELEASE_RISC); for (cnt = 0; cnt < 30000; cnt++) { - if ((RD_REG_WORD(&ha->iobase->hccr) & - HCCR_RISC_PAUSE) == 0) + if ((RD_REG_WORD(®->hccr) & HCCR_RISC_PAUSE) == 0) break; udelay(10); @@ -305,7 +305,7 @@ qla2300_pci_config(scsi_qla_host_t *ha) /* Get PCI bus information. */ spin_lock_irqsave(&ha->hardware_lock, flags); - ha->pci_attr = RD_REG_WORD(&ha->iobase->ctrl_status); + ha->pci_attr = RD_REG_WORD(®->ctrl_status); spin_unlock_irqrestore(&ha->hardware_lock, flags); return QLA_SUCCESS; @@ -352,7 +352,7 @@ void qla2x00_reset_chip(scsi_qla_host_t *ha) { unsigned long flags = 0; - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; uint32_t cnt; unsigned long mbx_flags = 0; uint16_t cmd; @@ -505,7 +505,7 @@ int qla2x00_chip_diag(scsi_qla_host_t *ha) { int rval; - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; unsigned long flags = 0; uint16_t data; uint32_t cnt; @@ -889,7 +889,7 @@ qla2x00_update_fw_options(scsi_qla_host_t *ha) void qla2x00_config_rings(struct scsi_qla_host *ha) { - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; /* Setup ring parameters in initialization control block. */ ha->init_cb->request_q_outpointer = __constant_cpu_to_le16(0); @@ -1196,7 +1196,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) init_cb_t *icb = ha->init_cb; nvram_t *nv = (nvram_t *)ha->request_ring; uint16_t *wptr = (uint16_t *)ha->request_ring; - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; uint8_t timer_mode; rval = QLA_SUCCESS; @@ -1389,8 +1389,6 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) /* * Set host adapter parameters. */ - ha->nvram_version = nv->nvram_version; - ha->flags.disable_risc_code_load = ((nv->host_p[0] & BIT_4) ? 1 : 0); /* Always load RISC code on non ISP2[12]00 chips. */ if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) @@ -1410,7 +1408,8 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) ha->serial0 = icb->port_name[5]; ha->serial1 = icb->port_name[6]; ha->serial2 = icb->port_name[7]; - memcpy(ha->node_name, icb->node_name, WWN_SIZE); + ha->node_name = icb->node_name; + ha->port_name = icb->port_name; icb->execution_throttle = __constant_cpu_to_le16(0xFFFF); @@ -2158,7 +2157,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports) loop_id = ha->min_external_loopid; for (; loop_id <= ha->last_loop_id; loop_id++) { - if (RESERVED_LOOP_ID(loop_id)) + if (qla2x00_is_reserved_id(ha, loop_id)) continue; if (atomic_read(&ha->loop_down_timer) || @@ -2328,7 +2327,7 @@ qla2x00_find_new_loop_id(scsi_qla_host_t *ha, fc_port_t *dev) } /* Skip reserved loop IDs. */ - while (RESERVED_LOOP_ID(dev->loop_id)) { + while (qla2x00_is_reserved_id(ha, dev->loop_id)) { dev->loop_id++; } @@ -2888,7 +2887,7 @@ static int qla2x00_restart_isp(scsi_qla_host_t *ha) { uint8_t status = 0; - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; unsigned long flags = 0; uint32_t wait_time; @@ -2901,8 +2900,6 @@ qla2x00_restart_isp(scsi_qla_host_t *ha) goto done; } - reg = ha->iobase; - spin_lock_irqsave(&ha->hardware_lock, flags); /* Disable SRAM, Instruction RAM and GP RAM parity. */ @@ -2973,7 +2970,7 @@ void qla2x00_reset_adapter(scsi_qla_host_t *ha) { unsigned long flags = 0; - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; ha->flags.online = 0; ha->isp_ops.disable_intrs(ha); diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index 8f99febc15db..6cf7036ccf4c 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -236,3 +236,14 @@ qla2x00_delete_timer_from_cmd(srb_t *sp) } } + +static inline int qla2x00_is_reserved_id(scsi_qla_host_t *, uint16_t); +static inline int +qla2x00_is_reserved_id(scsi_qla_host_t *ha, uint16_t loop_id) +{ + if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) + return (loop_id > NPH_LAST_HANDLE); + + return ((loop_id > ha->last_loop_id && loop_id < SNS_FIRST_LOOP_ID) || + loop_id == MANAGEMENT_SERVER || loop_id == BROADCAST); +}; diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index 5e079b5d9392..846dbfe26be3 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -315,13 +315,13 @@ qla2x00_start_scsi(srb_t *sp) uint16_t cnt; uint16_t req_cnt; uint16_t tot_dsds; - device_reg_t __iomem *reg; + struct device_reg_2xxx __iomem *reg; char tag[2]; /* Setup device pointers. */ ret = 0; ha = sp->ha; - reg = ha->iobase; + reg = &ha->iobase->isp; cmd = sp->cmd; /* So we know we haven't pci_map'ed anything yet */ tot_dsds = 0; @@ -521,7 +521,7 @@ qla2x00_marker(scsi_qla_host_t *ha, uint16_t loop_id, uint16_t lun, static request_t * qla2x00_req_pkt(scsi_qla_host_t *ha) { - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; request_t *pkt = NULL; uint16_t cnt; uint32_t *dword_ptr; @@ -586,7 +586,7 @@ qla2x00_req_pkt(scsi_qla_host_t *ha) void qla2x00_isp_cmd(scsi_qla_host_t *ha) { - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; DEBUG5(printk("%s(): IOCB data:\n", __func__)); DEBUG5(qla2x00_dump_buffer( diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 117b56242ee2..f38d13628f43 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -41,7 +41,7 @@ irqreturn_t qla2100_intr_handler(int irq, void *dev_id, struct pt_regs *regs) { scsi_qla_host_t *ha; - device_reg_t __iomem *reg; + struct device_reg_2xxx __iomem *reg; int status; unsigned long flags; unsigned long iter; @@ -54,7 +54,7 @@ qla2100_intr_handler(int irq, void *dev_id, struct pt_regs *regs) return (IRQ_NONE); } - reg = ha->iobase; + reg = &ha->iobase->isp; status = 0; spin_lock_irqsave(&ha->hardware_lock, flags); @@ -118,7 +118,7 @@ irqreturn_t qla2300_intr_handler(int irq, void *dev_id, struct pt_regs *regs) { scsi_qla_host_t *ha; - device_reg_t __iomem *reg; + struct device_reg_2xxx __iomem *reg; int status; unsigned long flags; unsigned long iter; @@ -133,7 +133,7 @@ qla2300_intr_handler(int irq, void *dev_id, struct pt_regs *regs) return (IRQ_NONE); } - reg = ha->iobase; + reg = &ha->iobase->isp; status = 0; spin_lock_irqsave(&ha->hardware_lock, flags); @@ -220,7 +220,7 @@ qla2x00_mbx_completion(scsi_qla_host_t *ha, uint16_t mb0) { uint16_t cnt; uint16_t __iomem *wptr; - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; /* Load return mailbox registers. */ ha->flags.mbox_int = 1; @@ -261,7 +261,7 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint32_t mbx) uint16_t handle_cnt; uint16_t cnt; uint32_t handles[5]; - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; uint32_t rscn_entry, host_pid; uint8_t rscn_queue_index; @@ -707,7 +707,7 @@ qla2x00_process_completed_request(struct scsi_qla_host *ha, uint32_t index) void qla2x00_process_response_queue(struct scsi_qla_host *ha) { - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; sts_entry_t *pkt; uint16_t handle_cnt; uint16_t cnt; diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index eeaec7c50e6a..b201971ff28e 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -58,7 +58,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp) { int rval; unsigned long flags = 0; - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; struct timer_list tmp_intr_timer; uint8_t abort_active = test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags); uint8_t io_lock_on = ha->flags.init_done; diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 549122dc68e6..328cd26e33b9 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1089,7 +1089,7 @@ static void qla2x00_enable_intrs(scsi_qla_host_t *ha) { unsigned long flags = 0; - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; spin_lock_irqsave(&ha->hardware_lock, flags); ha->interrupts_on = 1; @@ -1104,7 +1104,7 @@ static void qla2x00_disable_intrs(scsi_qla_host_t *ha) { unsigned long flags = 0; - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; spin_lock_irqsave(&ha->hardware_lock, flags); ha->interrupts_on = 0; @@ -1120,7 +1120,7 @@ qla2x00_disable_intrs(scsi_qla_host_t *ha) int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) { int ret = -ENODEV; - device_reg_t __iomem *reg; + struct device_reg_2xxx __iomem *reg; struct Scsi_Host *host; scsi_qla_host_t *ha; unsigned long flags = 0; @@ -1300,7 +1300,7 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n", ha->host_no, ha)); - reg = ha->iobase; + reg = &ha->iobase->isp; ha->isp_ops.disable_intrs(ha); diff --git a/drivers/scsi/qla2xxx/qla_rscn.c b/drivers/scsi/qla2xxx/qla_rscn.c index fb545b50fc2f..416fb7308e87 100644 --- a/drivers/scsi/qla2xxx/qla_rscn.c +++ b/drivers/scsi/qla2xxx/qla_rscn.c @@ -348,7 +348,7 @@ static inline struct mbx_entry * qla2x00_get_mbx_iocb_entry(scsi_qla_host_t *ha, uint32_t handle) { uint16_t cnt; - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; struct mbx_entry *mbxentry; mbxentry = NULL; diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 32583bbb487f..cf2a6bc444d2 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -38,7 +38,7 @@ void qla2x00_lock_nvram_access(scsi_qla_host_t *ha) { uint16_t data; - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) { data = RD_REG_WORD(®->nvram); @@ -70,7 +70,7 @@ qla2x00_lock_nvram_access(scsi_qla_host_t *ha) void qla2x00_unlock_nvram_access(scsi_qla_host_t *ha) { - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) { WRT_REG_WORD(®->u.isp2300.host_semaphore, 0); @@ -85,11 +85,9 @@ qla2x00_unlock_nvram_access(scsi_qla_host_t *ha) void qla2x00_release_nvram_protection(scsi_qla_host_t *ha) { - device_reg_t __iomem *reg; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; uint32_t word; - reg = ha->iobase; - /* Release NVRAM write protection. */ if (IS_QLA2322(ha) || IS_QLA6322(ha)) { /* Write enable. */ @@ -161,7 +159,7 @@ qla2x00_write_nvram_word(scsi_qla_host_t *ha, uint32_t addr, uint16_t data) int count; uint16_t word; uint32_t nv_cmd; - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; qla2x00_nv_write(ha, NVR_DATA_OUT); qla2x00_nv_write(ha, 0); @@ -223,7 +221,7 @@ static uint16_t qla2x00_nvram_request(scsi_qla_host_t *ha, uint32_t nv_cmd) { uint8_t cnt; - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; uint16_t data = 0; uint16_t reg_data; @@ -265,7 +263,7 @@ qla2x00_nvram_request(scsi_qla_host_t *ha, uint32_t nv_cmd) static void qla2x00_nv_deselect(scsi_qla_host_t *ha) { - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; WRT_REG_WORD(®->nvram, NVR_DESELECT); RD_REG_WORD(®->nvram); /* PCI Posting. */ @@ -280,7 +278,7 @@ qla2x00_nv_deselect(scsi_qla_host_t *ha) static void qla2x00_nv_write(scsi_qla_host_t *ha, uint16_t data) { - device_reg_t __iomem *reg = ha->iobase; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; WRT_REG_WORD(®->nvram, data | NVR_SELECT | NVR_WRT_ENABLE); RD_REG_WORD(®->nvram); /* PCI Posting. */ -- cgit v1.2.2