From ed773e66480fdcd06732eb2aa39362599dcd67fa Mon Sep 17 00:00:00 2001 From: Brian King Date: Thu, 29 Mar 2007 15:25:52 -0500 Subject: [SCSI] scsi_error.c: Add EH Start Unit retry Currently, the scsi error handler will issue a START_UNIT command if the drive indicates it needs its motor started and the allow_restart flag is set in the scsi_device. If, after the scsi error handler invokes a host adapter reset due to error recovery, a device is in a unit attention state AND also needs a START_UNIT, that device will be placed offline. The disk array devices on an ipr RAID adapter will do exactly this when in a dual initiator configuration. This patch adds a single retry to the EH initiated START_UNIT. Signed-off-by: Brian King Patch modified and Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/scsi/scsi_error.c') diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 7a1a1bb1341e..28a266c804be 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -932,10 +932,12 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd) static unsigned char stu_command[6] = {START_STOP, 0, 0, 0, 1, 0}; if (scmd->device->allow_restart) { - int rtn; + int i, rtn = NEEDS_RETRY; + + for (i = 0; rtn == NEEDS_RETRY && i < 2; i++) + rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, + START_UNIT_TIMEOUT, 0); - rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, - START_UNIT_TIMEOUT, 0); if (rtn == SUCCESS) return 0; } -- cgit v1.2.2